June1411PrChg 151 June1411Pr Chg
User Manual: 151
Open the PDF directly: View PDF 
.
Page Count: 162
| Download | |
| Open PDF In Browser | View PDF |
May 13, 2011 To Our Valued Customers: At the close of business Monday, June 13, 2011 we will implement a group of list price changes. We apologize for having to increase prices again so close to the May 9, 2011 price change. Unfortunately we have been left with little choice. We have received urgent price increase notices from major U.S. manufacturers implementing their increases without notice. What is common to these manufacturers is that they all use chemical components that are petroleum based. The affected products are silicones, sealants, lubricants, solvent cements and primers. Also note that other manufacturers are increasing prices due to fuel, overhead and continued raw material cost increases. The following page is an initial tab listing of the product groups that are changing at the close of business Monday, June 13, 2011. The new list prices will be available on our website at www.americangranby.com on or about June 6, 2011. Changes will be indicated in bold type. Catalog pages with list pricing can be viewed and downloaded for printing to update your AGI catalog. Excel files are also available for download on the site. We will not be mailing a hard-copy price change mailing. If you do not have access to our website, please contact your sales representative or Customer Service and we will forward you a copy of the Excel spreadsheet or the new catalog pages. Sincerely, Gary Palley V.P. Sales & Marketing 7652 Morgan Road Liverpool, New York 13090 (315) 451-1100 Fax: (315) 451-6928 The Original Source of Vendor Consolidation www.americangranby.com INSTRUCTIONS FOR OBTAINING LIST PRICE CHANGE DATA - JUNE 14, 2011 To obtain copies of our list price changes go to www.americangranby.com. Click the DOWNLOAD tab. There are multiple options for you to download. • For an Excel file of the latest list price changes in alpha numeric order: On the left under PRICE CHANGE UPDATES click on the 6/14/11 Price Change Excel File. This Excel file can be re-sorted or filtered as you need and includes both old and new list prices plus the % change. This file can be used as a reference or update to your operating system. • For a .PDF version of only the updated catalog pages: On the left under PRICE CHANGE UPDATES click on the 6/14/11 Catalog Page Changes PDF file. Print out only the catalog pages with changes and insert into your current product catalog. • Click on FULL CATALOG and SECTION DOWNLOADS for .PDF files of the Full Granby Catalog or for specific sections. Product Page Numbers Product Page Numbers Pool Rope & Rope Accy Relief Valves Float Valves Butterfly Valves Clear Braided Hose Boss Silicones P.03 P.05 P.24 P.25 P.31 P.41 - P.42 Tank Crosses Tank Crosses Tank Crosses Relief Valves / Tank Accy Clear Braided Hose Air Volume Controls/Releases Installation Accy Insert Fittings Flow Control Valves Pitless Adapters Well Point Supplies Pitcher Pump Cylinder parts Rod Couplings Jet Lube 1.07 1.10a - 1.10b 1.11 1.23 - 1.24 1.25 1.27 - 1.28 1.29 - 1.30 1.31 - 1.32 1.35 - 1.36 1.55 1.68 1.71 1.78 1.80 1.90 - 1.94 Galv Compression Ftgs Pipe Repair Clamps Clear Braided Hose Wax Gaskets Hanger Strapping Pipe Straps Pipe Hooks Pipe Hangers Pipe Hangers Stud Protectors 6.02 6.03 6.13 6.18 6.27 6.29 - 6.30 6.31 - 6.32 6.33 - 6.34 6.35 - 6.36 6.39 Tapes Boss Silicones Dow Silicones Cements, Primers Cleaners 7.02 7.09 - 7.12 7.14 7.17 - 7.26 Super Lube 8.05 - 8.09 Plumbing Tools 11.09 - 11.10 Check Valves Foot Valves Hydrants Hydrants 2.01 - 2.04 2.05 2.17 2.19 Ball Valves - NEW Ball Valves / Float Valves Swing Check Valves Plumbing Valves Butterfly Valves 3.02 3.03 - 3.04 3.06 3.07 - 3.08 3.23 Insert Fittings - Red Brass Insert Fittings - Steel Insert Fittings - Steel / YB Galv Compression Couplings Pipe Repair Clamps Merchant Couplings Threaded Bronze Import Malleables Domestic Malleables Nipples - RB Nipples - Steel 12.03 - 12.04 12.05 - 12.06 12.07 - 12.08 12.16 12.17 12.25 12.27 - 12.32 12.33 - 12.40 12.41 - 12.48 12.50 12.51 - 12.52 RO Systems - NEW UV Systems 4.08a 4.46 - 4.48 Pool Rope - Twisted/Braided Pool Rope Features: • Polypropylene. • Floatable. • Waterproof. • Rot Resistant. • Easy to Handle. • Resists Oil and Gasoline. • Resists Most Chemicals. • Resistant to Abrasion. • Resistant to Color Fading. PR Series Part Number Color Diameter Length List Price Twisted Pool Rope BPR Series PR25-6 PR38-4 PR38-6 PR50-3 PR50-6 PR58-6 PR75-3 PR75-6 Blue/White Blue/White Blue/White Blue/White Blue/White Blue/White Blue/White Blue/White 1/4” 3/8” 3/8” 1/2” 1/2” 5/8” 3/4” 3/4” 600’ 400’ 600’ 300’ 600’ 600’ 300’ 600’ $ 69.53 111.43 166.10 131.10 262.22 448.38 294.77 589.57 PR38-3R PR38-6R PR50-3R PR50-6R PR75-3R PR75-6R Red/White Red/White Red/White Red/White Red/White Red/White 3/8” 3/8” 1/2” 1/2” 3/4” 3/4” 300’ 600’ 300’ 600’ 300’ 600’ 83.05 166.10 131.10 262.22 294.77 589.57 PR38-3O PR38-6O PR50-3O PR50-6O PR75-3O PR75-6O Orange/White Orange/White Orange/White Orange/White Orange/White Orange/White 3/8” 3/8” 1/2” 1/2” 3/4” 3/4” 300’ 600’ 300’ 600’ 300’ 600’ 83.05 166.10 131.10 262.22 294.77 589.57 PR38-3W PR38-6W PR50-3W PR50-6W PR75-3W PR75-6W Solid White Solid White Solid White Solid White Solid White Solid White 3/8” 3/8” 1/2” 1/2” 3/4” 3/4” 300’ 600’ 300’ 600’ 300’ 600’ 83.05 166.10 131.10 262.22 294.77 589.57 YR25-500 YR25-1 Solid Yellow Solid Yellow 1/4” 1/4” 500’ 1000’ 50.89 98.93 Blue/White 3/8” 500’ 96.24 Braided Pool Rope BPR38-5 Splicing Fid FID FID TM Splicing Fid, For 3/8” braided rope www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 2.18 6/14/11 P.3 Pool Rope Anchors & Hooks Chrome Plated Brass Rope Accessory Features: • Bright chrome finished brass rope accessories. • Precision cast from corrosion resistant brass. • Stainless steel fasteners. • Black or White EPDM gaskets. • Fully assembled. HOE2 HOE2F HOE2FB HOE2 HCA HEBA HPRS Part Number Description HOE2 Chrome Plated Brass CURVED COPING MOUNT Oval Rope Anchor (Set of 2 w/ ss self tap screws) HOE2F Chrome Plated Brass FLAT WALL MOUNT 6/72 Oval Rope Anchor (Set of 2 w/ ss self tap screws, EPDM gasket) 12.87 HOE2FB Chrome Plated Brass FLAT WALL MOUNT 6/72 Oval Rope Anchor w/ brass mounting bracket and hardware (Set of 2 w/ ss screws, EPDM gasket, brass mounting brackets) 20.76 HCA Chrome Plated Brass Cup Anchor for concrete pools. 12/120 HEBA Chrome Plated Brass wall mount eye with washer gasket and nut for vinyl liners. 1-3/8” long bolt 20/200 12.32 HPRS Chrome Plated Strap Type Rope Anchor used under coping for vinyl pools. 14” long 12/252 12.47 HRH Chrome Plated Brass “S” Rope Hook for 1/4”-1/2” rope 500 5.04 AGHP52 CLEAT Style Chrome Plated Brass Hook for 3/8” & 1/2” rope w/ ss screws 125 15.39 AGHP53 CLEAT Style Chrome Plated Brass Hook for 3/4” rope w/ ss screws 125 20.04 HRH Ctn Qty List Price 72 $ 11.45 9.81 AGHP 5/3/11 P.4 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Pool Heater Accessories LR SERIES Features: • For use with Laars-Raypak pool and spa heaters. • Available in copper or stainless steel, with plastic quick connect union or bronze male adapter. Part Number Size Copper Tube with 1 Bronze Male Adapter LR617 LR619 LR623 LR626 LR623-2 Ctn Qty List Price 12 12 12 12 6 $ 119.95 125.82 136.81 139.01 186.43 8 8 108.79 119.78 8 8 8 8 8 6 6 6 104.40 111.92 123.24 128.08 146.98 147.20 151.37 165.44 LR/PL Series-1-1/2” LR/PR Series-2” 1 1 23.41 26.54 1 1/2” o-ring 2” o-ring 1 1 2.64 2.64 125 100 4.42 4.98 1-1/2” x 6” x 17” 1-1/2” x 6” x 19” 1-1/2” x 6” x 23” 1-1/2” x 6” x 26” 2” x 6” x 23” Copper Tube with Plastic Quick Connect Union LR Series LRUN Series LR617UN LR623UN 1-1/2” x 6” x 17” 1-1/2” x 6” x 23” Stainless Steel Tube with Plastic Quick Connect Union LR617SSUN LR619SSUN LR621SSUN LR623SSUN LR626SSUN LR617-2SSUN LR619-2SSUN LR623-2SSUN 1-1/2” x 6” x 17” 1-1/2” x 6” x 19” 1-1/2” x 6” x 21” 1-1/2” x 6” x 23” 1-1/2” x 6” x 26” 2” X 6” X 17” 2” X 6” X 19” 2” X 6” X 23” Replacement Union Assembly PHU150 PHU200 Union O-Ring PHU150 O-RING PHU200 O-RING Heater Union Repair Split Nut HSNR150 HSNR200 1 1/2” FBT Heater Split Nut Set w/ screws 2” FBT Heater Split Nut Set w/ screws Hot Water Swimming Pool Heater Safety Relief Valve Features: • Bronze safety relief valve protects ASME Section IV hot water heating boilers and hydronic heating systems. • High capacity design features corrosion resistant construction. • Ideal for use in swimming pool heater applications, hot water boilers and hydronic heating systems. • ASME Section IV. • Set pressure 75 psi. 20-80 psig certified pressure range. • Maximum temperature service 250ºF • Stainless steel springs. • Registered in all Canadian provinces and territories, CRN #0G8547.5C • Made in USA. 10-417-15 TM Part Number Description 10-417-15 3/4” M/F Safety relief valve Height Ctn Qty List Price 3” 100 $ 42.13 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 P.5 Equipment Pads HEF-T-PADTM Features: • Injection molded from high impact polyolefin for strength and durability. • Resistant to impact, UV degradation and weathering. • Will not crack, flake or warp. • Virtually impervious to climate changes. • Drillable, permits installation of refrigerant and electrical lines under and through pad. Also permits equipment to be easily secured to pad. • Unique, non-creep surface absorbs vibration and noise and keeps equipment in it’s original position. • Gray 5/3/11 P.6 Part Number Size 2” HEF-T-PADS X2424211 X2430211 X2436211 X3232211 X3244211 X3636211 X3830211 X3836211 X3842211 24” x 24” x 2” one piece 24” x 30” x 2” one piece 24” x 36” x 2” one piece 32” x 32” x 2” one piece 32” x 44” x 2” one piece 36” x 36” x 2” one piece 38” x 30” x 2” one piece 38” x 36” x 2” one piece 38” x 42” x 2” one piece 24 24 24 24 24 24 24 24 24 $ 52.18 66.41 80.24 85.33 107.51 106.67 86.92 110.69 139.77 3” HEF-T-PADS X2424311 X2436311 X3030311 X3232311 X3244311 X3636311 X3848311 X5055301 24” x 24” x 3” one piece 24” x 36” x 3” one piece 30” x 30” x 3” one piece 32” x 32” x 3” one piece 32” x 44” x 3” one piece 36” x 36” x 3” one piece 38” x 48” x 3” one piece 50” x 55” x 3” modular 16 16 16 16 16 16 16 16 63.99 98.62 81.75 98.94 131.40 133.90 172.56 308.71 X2600311 26” diameter round x 3” one piece 16 61.03 TM Pallet Qty List Price www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Check Valves - PVC Spa, By-Pass PVC Spa Air Valve Features: • Drip proof seal at low pressure. • 1 1/2” IPS deep socket connection with 2” IPS OD spigot • Excess solvent cement trap at base of socket to help prevent solvents from entering sealing area. • Minimum restriction of air flow, using 1/4 lb. spring resulting in less burden on blower motor. • Domed shaped seat for even air flow. • EPDM seal. • Stainless steel spring. 1050 Series PVC In-Line By-Pass Check Valve Features: • In-line shape takes less space. • Raised valve seat prevents excess cement of solvent from affecting the seal area. • Poppet is equipped with EPDM seal. • Body is made of Type 1 PVC. • All metal parts are stainless steel. • Valve stem is reinforced w/ full length stainless steel shaft. • Static pressure tested: 150 psi @ 72°F. Back pressure tested at 150 psi. • Quick burst test proves in excess of 500 psi • 2” iron pipe size • Valve can be used on 1-1 1/2” pipe by use of a PVC Sch 40 bushing. • Begins to open at 1/2 lb. or 5 lb. • NSF approved. 1095 Series CPVC 90° Spring Check Valve Features: • • • • • 1901/1903 Series Use in pool, spa applications. CPVC body with corrosion proof poppet. Spring made of 302 stainless. Available with 1 lb. or 3 lb. spring tension. NSF approved. Part Number IPS Size Body Length Ctn Qty List Price PVC Spa Air Valve - 1-1/2” ips socket / 2” ips o.d. spigot 1050-20 2” 5-1/8” 12 $ 26.38 5” 12 33.27 12 12 12 12 82.32 82.32 82.32 82.32 PVC In Line By-Pass Check Valve 1095-20 2” w/ 5# spring CPVC 90° Spring Check Valve, w/ stainless steel poppet 1901-15 1903-15 1901-20 1903-20 See “FLO/NDS” tab for a complete line of Flo Control PVC check valves. TM 1 1/2” check valve, 1 lb. tension 1 1/2” check valve, 3 lb. tension 2” socket x 2 1/2” spigot valve, 1 lb. tension 1” socket x 2 1/2” spigot valve, 3 lb. tension www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 2/15/11 P.23 Bronze Float Valves Bronze Float Valve Features: • • • • • • Cast bronze body Buna-N Disc Heavy Duty Tapped for 1/4-20SAE rod Threaded outlet Rated at 125 psi. Part Number Size Inlet Outlet Tapped Ctn/Case Qty List Price BFV1/2 BFV3/4 BFV1 1/2” 3/4” 1” 1/2” mpt 3/4” mpt 1” mpt 1/2” mpt 3/4” mpt 1” mpt 1/4”-20SAE 1/4”-20SAE 1/4”-20SAE 10/100 10/80 10/40 $ 29.70 35.83 47.34 Brass Rods Features: BFV Series • Brass SAE • Male thread both ends Part Number BFVR Series Length BFVR8 BFVR10 BFVR12 8” 10” 12” Thread 1/4”-20SAE 1/4”-20SAE 1/4”-20SAE Fits Valve Size Ctn/Case Qty List Price 1/2” - 1” 1/2” - 1” 1/2” - 1” 50/400 50/300 50/300 $ 6.62 7.67 8.59 List Price Plastic Float Features: • Lightweight, Corrosion resistant PVC • Up to 175°F • For open tank service only Part Number BFVFP Series 6/14/11 P.24 Float Diam. Buoyancy Female Connection Ctn Qty 5” 6” 8” 2.17 lbs. 3.8 lbs. 9.87 lbs. 1/4”-20SAE 1/4”-20SAE 1/4”-20SAE 100 100 20 BFVFP5 BFVFP6 BFVFP8 TM $ 21.23 25.00 31.08 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Butterfly Valves - Cast Iron Cast Iron Butterfly Valve Features: HBFV Series ISO 9002 * • Designed for swimming pool, irrigation and water systems. • Wafer body features 4 alignment holes. • Lever lock handle (spring loaded) provides excellent manual control for balancing or shut off services. • Notched throttling plate allows balancing in 10º increments in any position desired within 90º arc rotation of the disc. • Positive bubble-tight shutoff with minimum torque. • Seat face eliminates need for flange gaskets. • Phenolic backed seats prevent collapse, are stretch resistant, blowout proof and field replacable. • EPDM seats temperature rated at -30°F to 275°F. • 416 stainless steel shaft • Bidirectional dead-end capability for 250 psi (2” - 12”). • Compatible with ANSI 125/150 flanges. • Valves meet AWWA C-504-87 section 5 proof of design tests. • Designed to comply with MSS SP-67 and API 609. • Ductile iron, ENP plated disc. • Manufactured for AGI in an ISO 9002 facility. • Imported Part No. Size Ductile Iron ENP Plated Disc* HBFV2 HBFV21/2 HBFV3 HBFV4 HBFV5 HBFV6 HBFV8 HBFV10 HBFV12 HFBV GEAR Series 2” 2-1/2” 3” 4” 5” 6” 8” 10” 12” Weight(lbs) Ctn Qty List Price 7 8 10 12 15.5 17.5 33 50 74 1 1 1 1 1 1 1 1 1 $ 107.09 126.65 162.95 209.38 229.78 273.75 461.73 577.31 917.27 1 1 351.89 573.50 1 1 1 1 1 1 1 1 17.46 17.46 17.46 20.87 20.87 42.94 42.94 48.88 Ductile Iron ENP Plated Disc - GEAR DRIVE * HBFV6-GEAR HBFV8 GEAR 6” 8” 28.5 54 Replacement Handles for HBFV Series BFH2 BFH3 BFH4 BFH5 BFH6 BFH8 BFH10 BFH12 2" 3" 4" 5" 6" 8" 10" 12" Flanges & Bolt kits available, see page P.28 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 P.25 Butterfly Valves - Cast Iron MATERIAL SPECIFICATIONS No. 1 2 3 4 5 6 7 8-10 Part Body Disc Seat Shaft Taper Pin Key O-rings Bushing Material Cast Iron Ductile Iron EPDM 416 Stainless Steel 316 Stainless Steel Carbon Steel EPDM PTFE SIZE \ DIMENSION (in) for HBFV Series A B C D E 2” 6 3/8 3 1/4 2 1/2” 6 7/8 3 3/4 3” 7 1/8 4 4” 7 7/8 4 7/8 5” 8 3/8 5 3/8 6” 8 7/8 5 7/8 8” 10 1/4 7 1/8 10” 11 1/2 8 1/4 12” 13 1/4 9 3/4 4/2009 P.26 1 3/4 1 7/8 1 7/8 2 1/8 2 1/4 2 1/4 2 1/2 2 3/4 3 1/8 1 1/4 1 1/4 1 1/4 1 1/4 13/16 1 1/4 1 3/4 1 3/4 1 3/4 1/2 1/2 1/2 5/8 3/4 3/4 7/8 1 1/8 1 1/4 F G H J K L2 M2 3/8 3/8 3/8 3/8 3/8 3/8 7/16 7/16 7/16 2.76 2.76 2.76 2.76 2.76 2.76 4.02 4.02 4.02 .39 .39 .39 .47 .55 .55 .67 .87 .95 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 3 3/4 3 3/4 3 3/4 4 3/4 5 1/2 6 7 1/2 8 1/2 9 1/2 11 3/4 14.14 17 11/16 11/16 11/16 11/16 13/16 13/16 13/16 15/16 15/16 4 4 4 4 4 4 4 4 4 TM N O 4 1.26 4 3/4 1.83 5 1/8 2.54 6 3/4 3.54 7 3/4 4.36 8 5/8 5.72 10 9/16 7.6 13 1/16 9.5 16 1/8 11.45 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Clear Braided PVC Hose Clear Braided PVC Hose Standard Wall, Class 125 Features: • Flexible, see through clear hose with braid pattern reinforcement of two polyester spirals. • Flexible clear PVC NSF 51 certified to 100ºF (38ºC), USP CLASS V1 rated. • All hose compound ingredients used are listed in US FDA CFR, Title 21. • Temperature range + 25º to 150º F / -5º to +65ºC. • Silicone free. • Food and beverage grade, standard wall. • Use for air, water lines. Part Number Nominal (inches) ID OD CBH316-1 CBH25-1 CBH516-1 CBH38-1 CBH50-1 CBH50-3 CBH58-1 CBH75-1 CBH75-3 CBH100-1 CBH100-2 CBH125-50 CBH125-1 CBH150-50 CBH150-1 CBH200-50 CBH200-1 3/16 1/4 5/16 3/8 1/2 1/2 5/8 3/4 3/4 1 1 1 1/4 1 1/4 1 1/2 1 1/2 2 2 0.375 0.438 0.525 0.594 0.750 0.750 0.875 1.030 1.030 1.300 1.300 1.625 1.625 1.937 1.937 2.490 2.490 Max Working Pressure PSI@68ºF PSI@122ºF 250 250 250 225 200 200 200 150 150 125 125 100 100 100 100 75 75 105 105 105 97 86 86 86 65 65 54 54 43 43 43 43 33 33 Reel Length Approx Wt per CFT. List Price Per Reel 100’ 100’ 100’ 100’ 100’ 300’ 100’ 100’ 300’ 100’ 200’ 50’ 100’ 50’ 100’ 50’ 100’ 4.5 lbs 5.7 lbs 7.5 lbs 9.0 lbs 13.8 lbs 13.8 lbs 16.5 lbs 21.9 lbs 21.9 lbs 31.5 lbs 31.5 lbs 45.0 lbs 45.0 lbs 64.0 lbs 64.0 lbs 95.0 lbs 95.0 lbs $ 117.06 102.32 150.56 145.37 195.91 587.73 231.09 293.71 881.15 378.42 707.34 359.08 718.17 432.96 865.91 739.93 1479.89 ** Temperatures higher than 68º F reduce available working pressure. See next page for temperature, working pressure calculation chart and cautionary note. TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 P.31 Clear Braided PVC Hose Effects of Elevated Temperatures on Thermoplastic Hose. The compounds used in clear braided PVC hose are generally referred to as thermoplastics. These materials achieve their optimum physical properties at room temperature, 68ºF (20ºC). As these materials are exposed to increased ambient temperatures, they will soften and their physical properties will change. This will have the effect of sharply reducing the available working pressure. Coupling retention will also be reduced. The charts below illustrate this effect. In all cases, the product should be tested in a controlled, secure and safe environment, and all operating conditions should be considered prior to use. All published working pressures of AGI Series CBH hose are based on a room temperature of 68ºF (20ºC). Example from the Fahrenheit Chart If working pressure at 68ºF is 200 psi, then the WP at 110ºF is 200 x 50%, or 100 psi Example from the Celsius Chart If working pressure at 20º is 14 bar, then the WP at 50ºC is 14 x 50%, or 5.6 bar CAUTIONARY NOTE The charts are to used as a guideline only. The information and recommendations contained here are, to the best of our manufacturer’s knowledge, accurate and reliable, but no guarantee of their accuracy is made. All products are sold upon the condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses, and purchasers assume all risks and liability for the results of use of the products, including use in accordance with seller’s recommendations. Variability in length of exposure, temperature, pressure, velocity of fluid, and chemical concentration all contribute to reduced working pressure and hose reliability. 4/2009 P.32 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 BOSS® Pool & Spa Adhesives, Lubricants & Sealants BOSS® line of adhesives, grouts and lubricants are specifically formulated for use with pools and whirlpool baths. BOSS® 801 Neutral Cure Silicone Adhesive Features: • A one part, low odor, non-corrosive, oxime cure adhesive and sealant. • Provides excellant adhesion to ceramic tile, spa jets, skimmers, lighting fixtures, plumbing and fiber optic lighting. • Adheres well to fiberglass, ABS, acrylic, PVC, wood and masonry. BOSS® 802 Acetoxy Cure Silicone General Purpose Adhesive Features: • A one part, acetoxy cure, adhesive/sealant. • Performs well in jet sealing applications. • Designed for many other pool and spa maintenance and repair needs. BOSS® 803 Neutral Cure Silicone Adhesive/Grout Features: • A one part, low odor, non-corrosive, oxime cure silicone grout. • Formulated for use in repairing tile installations. • Adheres well to fiberglass, ABS, acrylic, PVC, wood and masonry. BOSS® 804 Neutral Cure Silicone Ceramic Tile Grout Features: • A one part, low odor, non-corrosive, oxime cure silicone grout. • Spreads easily and provides ample tooling time. • Excellent ahdesion to all ceramic tiles BOSS® 820 Pool & Spa Silicone Lubricant Features: • Water washout resistant and non-solidifying compound. • Provides superb lubricant for rubber o-rings. • Non-corrosive, silicone lubricant compound. TM Part Number Description Ctn Qty 80100B 80101B 80200B 80201B Silicone Adhesive Clear, 10.3 oz cart Silicone Adhesive White, 10.3 oz cart Silicone Adhesive Gen Purpose, Clear 10.3 oz. cart Silicone Adhesive Gen Purpose, White 10.3 oz cart 12 12 12 12 $ 15.31 15.31 9.37 9.37 80331B 80401B Silicone Adhesive Grout, Clear 3 oz. tube Silicone Ceramic Tile Grout, White 10.3 oz cart 12 12 7.65 15.31 82001B 82002B 82030B 82000B Pool & Spa Lubricant Clear, 1 oz tube bulk Pool & Spa Lubricant Clear, 1 oz tube 36 pc tub Pool & Spa Lubricant Clear, 3 oz tube Pool & Spa Lubricant Clear, 5.3 oz tube 288 36 12 12 5.18 249.90 7.88 13.21 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 List Price 6/14/11 P.41 BOSS® Expanding Foam Sealant BOSS® 333 Expanding Foam Sealant Features: • Easy to use, multi-purpose urethane foam. • Unlike ordinary sealants, it expands three times it’s original volume. • Adheres to all building materials except Teflon®, silicone and polyethelene. • Seals by expanding into gaps, cracks and crevices. • Uses including insulating, sealing and filling gaps around pipes, plumbing fixtures,ductwork and foundations. • UL classified. DIRECTIONS FOR USE: 1. Shake can before and during use. 2. Surface must be clean and free of grease and oil. 3. Can must be held UPSIDE DOWN during application. 4. Insert straw into void and depress the trigger. The use of protective gloves is highly recommended. 5. Fill void 50% full to allow for expansion. 6. Uncured foam can be cleaned with acetone or paint thinner. 7. Cured foam can be trimmed, sanded, painted r stained. Foam MUST be painted or coverred if application is exposed to UV light. R19028 CAULKING AND SEALANTS SURFACE BURNING CHARACTERISTICS APPLIED TO INORGANIC REINFORCED CEMENT BOARD* FLAME SPREAD: 5 SMOKE DEVELOPED: 20 38FN * Tested as applied in three 3/4” beads 5” on center covering 12.5% of the exposed test sample area. Part Number Description Ctn Qty 33316B * 33324B * Expanding Foam Sealant, 12 oz can w/ application tip 12 Expanding Foam Sealant, 24 oz can w/ application tip 12 List Price $ 14.55 28.47 * SHIPPING NOTE: Ground shipping only. Can NOT be shipped via air. 6/14/11 P.42 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Installation & Repair 3M Spray Adhesives PERMAPOXY Underwater Repair Epoxy • Ideal for pool & spa repairs. • Resin and hardener in same stick • Hand kneadable. • Unaffected by chlorinated or salt water. • Sets in 5 minutes, cures in 1 hour. • Dries White. • Can be sanded and drilled. ISO 9001 Part Number 82093 Size Ctn Qty 7” stick 12 BLUE 72 ISO 9001 List Price Part Number $ 21.22 BLUE 72 ORANGE 74 Contractor/Industrial Grade Cloth Reinforced Duct Tape HDT Series ISO 9002 • • • • • • • • • • Multi-purpose duct tape. Polyethylene coated cloth backing. Natural rubber based adhesive. Temperature range: 40ºF to 200°F. Superior tensile strength, adhesion & tack. Recommended for pool liner installations. Conformable and will not curl or twist during application. 10 mil thickness Silver Manufactured for AGI in an ISO 9002 facility. Part Number Width x Length Ctn Qty HDT260 2” x 60 yards 24 List Price $ 20.70 • Repositionable BLUE pressure sensitive spray adhesive. • One side bonds in 8 hours, aggressive tack, low soak in. • Covers 100 sq ft. • Ideal for pool liner installation. ORANGE FOAM FAST 74 • Permanent, light orange, fast tack. • Two sides bond in 15 minutes. • Covers 260 sq. ft. Both manufactured for AGI in an ISO 900 facility. Pallet pricing available. Call your sales rep. Size Ctn/Pallet Qty List Price Blue Spray Adhesive 12/768 24 fl oz can, 17.3 oz net wt. Orange spray adhesive 12/768 24 fl oz can, 17.3 oz net wt $ 35.70 43.33 Fix A Leak Features: FAL32 Fix A Leak is a blended material, designed to seal leaks in just about anything. It works in any kind of pool, spa or hot tub, regardless of constructed material, concrete, fiberglass, acrylic, wood, etc. It works equally well in all plumbing materials including PVC, ABS, poly plastics, vulcathen, copper, steel, etc. • Seals leaks up to 1/8” in diameter. • Forms a permanent seal. • One quart is designed to seal leaks in up to 20,000 gallons. Do not use in excess of 1 quart per 5,000 gallons of water. • Cures in 24-48 hours. • Patented by Marlig Industries, Inc. Part Number Description FAL32 FAL8 Fix A Leak Sealant, 32 oz. Fix A Leak Sealant, 8 oz. Ctn Qty List Price 12 20 $ 49.25 20.11 See the “Tapes, Sealants, Cements” and “Permatex Industrial” tabs for more installation & repair materials. TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 4/30/11 P.43 Installation & Repair HARVARD CONTRACTOR’S Power Cord Features: • • • • • • PTC163-6ST Three prong straight (115V) or right angle (115V, 220V) molded plugs. 16 gauge, 3 conductor, 13 amp, 125 Volt rating. 14 gauge, 3 conductor, 15 amp, 250 Volt rating. Six foot cord length. Free end is split, stripped 3/8”. UL and CSA listed in US and Canada. PTC163-6RA Part Number Description PTC163-6ST PTC163-6RA PTC143-6RA220 Straight plug cord Right angle plug cord Right angle plug cord Wire Gauge Volt Rating Ctn Qty List Price 16 16 14 125 V 125 V 250 V 50 50 50 $ 6.61 9.47 14.11 PTC143-6RA220 HARVARD CONTRACTOR’S Anchor Kit Features: • Anchor kits complete with 100 plastic anchors, 100 screws and 1/4” masonry drill bit in a plastic case. • Plastic gray ribbed anchors with lip design for electronic timer, pump start relay installations. Use with concrete block, brick and wallboard. • Anchors have internal ribs for better centering of screws, locking lugs against pull and twist. Exterior design prevents fall out in overhead holes. • Kit available with combination slotted/phillips head or tri-combination, slotted/phillips/hex head #10 x 1” screws. • Kits complete with 1/4” x 4” masonry drill bit. • Clear, unbreakable plastic case with molded-in hanging tab. Combo Head 2/15/11 P.44 Part Number Description AK10CSPR AK10TCR Ribbed Combo Head Ribbed Tri Combo Head Ctn Qty List Price 36 36 $14.11 15.00 Tri Combo Head TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Concrete Repair Horizontal Concrete Repair Features: Hardens in as little at 5 minutes, Cracks and spalls in concrete floors are an eyesore as well as a potential safety risk. Fixing them has meant either hiring and waiting for an outside contractor or doing it youself with a repair method that takes the floor out of service for up to 24 hours. Now with 3M Concrete Repair, you save money and time. • Self-leveling urethane flows smoothly into cleaned cracks and gaps and hardens in as little as 5 minutes. A fork lift can pass over a repair in as few as 15 minutes. • Hardens to any depth without cracking or shrinking. • Flexible urethane expands and contracts for durability that outlasts repairs made with concrete. • Do it yourself with a common caulking gun and eliminate the cost and wait for an outside contractor. • Easy to use - Just clean damaged area and fill. With every squeeze of the caulking gun trigger, cartridge nozzle meters and mixes precise proportions for optimum performance. Part Number Description DP600 Concrete Repair, 8.4 fl oz cartridge supplied with 2 nozzles Ctn Qty List Price 6 $ 111.72 Ctn Qty List Price 9” Ratchet Style Caulking Gun DP600 TM Part Number Size CG9 9” Ratchet Color Blue 20 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 4.39 4/30/11 P.47 Concrete Repair Horizontal Concrete Repair Specifications: • • • • • Gray, self-leveling urethane concrete repair. 8.4 fl oz. cartridge of concrete repair and 2 nozzles. Work life of 70 sec. Handling time of 5 minutes Cure time of 60 minutes Applications: • Repairing cracks and spalls on concrete floors or horizontal surfaces. • Setting anchors in concrete floors or horizontal surfaces. • Light-duty custom threading and anchoring. • Use outdoors or in highly ventilated area. Approximate coverage: Crack Crack Lineat Feet per Width Depth 8.4 fl. oz. 1/4” 1/4” 19.3 1/2” 1/4” 9.9 3/4” 1/4” 6.4 1” 1/4” 4.9 1/4” 1/2” 9.9 1/2” 1/2” 4.9 3/4” 1/2” 3.0 1” 1/2” 2.0 Bead Size dimension 1/16” 1/8” 1/4” 3/8” 1/2” Linear Feet per 8.4 fl oz. 815.0 205.0 51.9 22.2 12.4 Quick and Easy Spall Repair Clean Remove all loose material from area to be filled. Concrete should be dry and grease-free. 4/2009 P.48 TM Fill Dispense product into deepest part of repair areas, slightly overfilling. Product self-levels and is tack-free in as little as one minute. Finish In as little as 15 minutes, product can be sanded to remove rough edges. It can be painted within one hour. www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Tank Crosses - Short Cast General Tank Cross Features: • Internal and external threads reduce fittings needed and installation time. • Reduces turbulence and waterlogging in tanks without separate air chambers. • Cast bronze, brass, injected molded PVC, galvanized ductile iron. • Prices are for bulk packaged tank crosses. • For individually boxed crosses, remove “C” prefix and add $2.25 to list price. CHT125B CHT100FB Part Number Overall Length CHT100FB CCAT100B CHC125B CHC12550BS CIC701B CHT125B CIC701BS CIC125B CIC125 2 1/2” 4 1/4” 4 1/4” 4 1/2" 3 3/4” 3 3/4” 4 1/2" 4 1/4” 4 1/4” Tank Conn. Leg Conn. 1” fpt 1” X 3/4” 1” x 3/4” 1” x 3/4” 1 1/4” x 1” 1” x 3/4” 1 1/4" x 1" 1" x 3/4" 1 1/4” x 1” 1 1/4” x 1” 1 1/4” x 1” 1 1/4” x 1” 1 1/4" x 1" 1 1/4" x 1" 1 1/4” x 1” 1” x 3/4” 1 1/4” x 1” 1” x 3/4” Short Cast Crosses with 1 drain and 2 or 3 top ports. * Do not use teflon tape with PVC tank cross applications. Drain Ports Size (Qty) Top Ports Size (Qty) Material USA or Import Ctn Qty List Price 3/4” (1) 1/2” (1) 1/2” (1) 3/4" (1) 3/4” (1) 3/4” (1) 3/4" (1) 3/4” (1) 3/4” (1) 1/4” (2) 1/4” (2), 1/2” (1) 1/4” (3) 1/4" (2) 1/4” (3) 1/4” (2) 1/4" (2) 1/4” (2), 1/2” (1) 1/4” (2), 1/2” (1) Bronze Bronze Bronze Brass Bronze Bronze Brass Bronze PVC* Import Import USA Import USA Import Import Import USA 5/40 4/40 12 5/40 12 5/30 4/32 4/40 100 $ 34.29 52.54 51.43 41.00 56.61 34.29 39.82 51.66 12.32 List Price Short Cast Crosses with 2 drain and 2 top ports. Part Number Overall Length CICS100B CICS100BS CIC3125B CIC3125BS CIC71250BS CIC712B 4 3/4” 4 1/2” 5” 4 1/2” 4 1/2" 4” Tank Conn. Leg Conn. 1” 1” x 3/4” 1” x 3/4” 1” x 3/4” 1 1/4” x 1” 1 1/4” x 1” 1 1/4” x 1” 1 1/4” x 1” 1 1/4" x 1" 1" x 3/4" 1 1/4” x 1” 1” x 3/4” Drain Ports Size (Qty) Top Ports Size (Qty) Material USA or Import Ctn Qty 1/2” (2) 1/2” (2) 3/4” (2) 3/4” (2) 1/2" (2) 3/4” (2) 1/4” (2) 1/4” (2) 1/4” (2) 1/4” (2) 1/4" (2) 1/4” (2) Bronze Brass Bronze Brass Brass Bronze USA Import USA Import Import USA 12 5/40 12 4/32 5/40 12 $ 46.71 27.31 62.87 41.00 39.71 53.45 Short Cast Crosses with Union Disconnect * with Teflon gasket seal ** with metal to metal ball joint seal “E” Series light pattern brass tank crosses compete with Merrill & Boshart equivalents. Part Number Overall Length CICS100BSUE** CICS100BSU* ☺ CICS100BU** CICS125BSUE** CICS125BSU* ☺ CICS125BU** 5 1/2” 5 1/2” 5 1/2” 5 1/2” 5 1/2” 5 1/2” Tank Conn. Leg Conn. 1” 1”x3/4” 1” 1”x3/4” 1” 1” x 3/4” 1 1/4”x 1” 1 1/4” x 1” 1 1/4”x 1” 1 1/4” x 1” 1 1/4” x 1” 1 1/4” x 1” TM Drain Ports Size (Qty) Top Ports Size (Qty) Material USA or Import Ctn Qty List Price 1/2” (2) 1/2” (2) 1/2” (2) 3/4” (2) 3/4” (2) 3/4” (2) 1/4” (2) 1/4” (2) 1/4” (2) 1/4” (2) 1/4” (2) 1/4” (2) Brass Brass Bronze Brass Brass Bronze Import Import Import Import Import Import 4/24 4/24 4/24 4/24 4/24 4/24 $ 31.05 46.21 29.00 43.48 62.78 41.00 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 1.7 Tank Crosses - Short Cast, Specialty General Tank Cross Features: • Internal and external threads reduce fittings needed and installation time. • Reduces turbulence and waterlogging in tanks without separate air chambers. •Cast bronze, brass, injected molded PVC, galvanized ductile iron. • Prices are for bulk packaged tank crosses. • For individually boxed crosses, remove “C” prefix and add $2.25 to list price. Short cast crosses for use with Flexcon Flex-Lite Series, WellMate Tanks Part Number Overall Length Tank Conn. Leg Conn. Drain Ports Top Ports Size (Qty) Size (Qty) CWM100BS CWM125BS CICS736BS 4 1/2” 1” (FIP) 1”x3/4” 4 3/4” 1 1/4” (FIP) 1 1/4”x1” 2 1/2” 1 1/4” MIP x 1” FIP 1”x3/4” 1/2” (2) 3/4” (2) 1/2” (2) 1/4” (2) 1/4” (2) 1/4” (2) USA or Material Import Brass Brass Brass Import Import Import Ctn Qty List Price 5/40 $ 34.07 4/32 42.04 5/40 29.12 Short cast female union tank crosses for use with Flexcon “Flex-Lite” Series, WellMate Tanks. FPT brass union w/ American Standard Buna-N o-ring. Part Number •1” uses AS 568-212 o-ring •1 1/4” uses AS 568-320 o-ring. • CICS100BSFTU65 for use with WellMate Low Profile Series or other 1” mpt connection tanks that need extra length. Overall Tank Leg Drain Ports Top Ports USA or Ctn Length Conn. Conn. Size (Qty) Size (Qty) Material Import Qty CICS100BSFTU CICS100BSFTU65 CICS1251BSFTU CICS125BSFTU 4” 6 1/2” 4” 4” 1” fpt union 1” fpt union 11/4” fpt union 11/4” fpt union 1” x 3/4” 1” x 3/4” 1” x 3/4” 11/4” x 1” 1/2” (2) 1/2” (2) 1/2” (2) 3/4” (2) 1/4” (2) 1/4” (2) 1/4” (2) 1/4” (2) Brass Brass Brass Brass Import Import Import Import List Price 4/32 $ 46.82 4/32 38.89 4/32 43.57 4/24 60.43 Short cast quick connect (w/ Buna-N oring) tank crosses for use with WellMate “Quick Connect” Series tanks. • 1” and 1 1/4” uses AS 568-220 o-ring. Part Number Overall Length CWM100BSQC CWM125BSQC 4 1/2" 4 1/2" Tank Conn. Leg Conn. Quick Connect 1” x 3/4” Quick Connect 11/4" x 1” Drain Ports Size (Qty) Top Ports Size (Qty) Material USA or Import 1/2" (2) 3/4" (2 1/4" (2) 1/4" (2) Brass Brass Import Import Ctn Qty List Price 4/32 $ 35.96 3/24 37.04 Short cast crosses for use with Flexcon Well-Rite, Online Series Part Number Overall Length CFC100BS CFC125BS 4 1/2” 1” Union Th. 1” x 3/4” 4 1/2” 1 1/4” Union Th. 1 1/4” x 1” 5/3/11 1.8 Tank Conn. Leg Conn. TM Drain Ports Size (Qty) Top Ports Size (Qty) Material USA or Import Ctn Qty List Price 1/2” (2) 3/4” (2) 1/4” (2) 1/4” (2) Brass Brass Import Import 5/40 5/30 $ 27.14 36.20 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Tank Crosses - Short Cast NO LEAD Brass, Stainless Steel Tank Cross Features: • Internal and external threads reduce fittings needed and installation time. • Reduces turbulence and waterlogging in tanks without separate air chambers. • Cast NO LEAD brass or 304 Stainless Steel. • NO LEAD brass tank crosses are CA AB1953 certified. • 304 Stainless Steel crosses contain no lead. Short Cast Crosses with 2 drain and 2 top ports. “E” Series light pattern No Lead brass tank crosses compete with Merrill & Boshart equivalents. Part Overall Number Length NO LEAD Brass CICS100BSENL CIC3125BSENL 4 1/2” 4 1/2” Tank Conn. Leg Conn. Drain Ports Size (Qty) Top Ports Size (Qty) 1/2” (2) 3/4” (2) 1/4” (2) 1/4” (2) 1” x 3/4” 1” x 3/4” 1 1/4” x 1” 1 1/4” x 1” Material USA or Import No Lead Brass Import No Lead Brass Import Ctn Qty List Price 4/24 4/24 28.70 40.75 Short Cast Crosses with Union Disconnect • Metal to metal ball joint seal on NO LEAD brass crosses. • Teflon gasket seal on 304SS crosses. “E” Series light pattern brass tank crosses compete with Merrill & Boshart equivalents. Part Number NO LEAD Brass Overall Length Tank Conn. Leg Conn. Drain Ports Top Ports Size (Qty) Size (Qty) CICS100BSUENL CICS125BSUENL 5 1/2” 5 1/2” 1” 1 1/4”x 1” 1”x3/4” 1 1/4” x 1” 1/2” (2) 3/4” (2) 1/4” (2) 1/4” (2) 1” 1 1/4”x 1” 1”x3/4” 1 1/4” x 1” 1/2” (2) 3/4” (2) 1/4” (2) 1/4” (2) USA or Import Ctn Qty List Price No Lead Brass Import No Lead Brass Import 4/24 4/24 $ 42.45 58.93 4/24 4/24 65.72 85.54 Material 304 Stainless Steel CICS100SSU CICS125SSU 5 1/2” 5 3/4” TM Stainless Stainless Import Import www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 1.10a Tank Crosses - Long Cast NO LEAD Brass, Stainless Steel General Tank Cross Features: • Internal and external threads reduce fittings needed and installation time. • Reduces turbulence and waterlogging in tanks without separate air chambers. • Cast NO LEAD brass or 304 Stainless Steel. • NO LEAD brass tank crosses are CA AB1953 certified. • 304 Stainless Steel crosses contain no lead. NO LEAD Brass Long Cast Tank Crosses with 2 drain and 2 top ports. “E” Series light pattern brass tank crosses compete with Merrill & Boshart equivalents. Part Overall Number Length NO LEAD Brass Tank Conn. Leg Conn. Drain Ports Size (Qty) Top Ports Size (Qty) Material USA or Import Ctn Qty List Price CIC100BSENL CIC100BS14ENL CIC125BS14ENL 1” 1” 1 1/4” 1” x 3/4” 1” x 3/4” 1 1/4” x 1” 1/2” (2) 1/2” (2) 3/4” (2) 1/4” (2) 1/4” (2) 1/4” (2) No Lead Brass No Lead Brass No Lead Brass Import Import Import 2/24 2/12 2/12 $ 40.89 55.51 76.53 11” 14” 14” Long Cast Tank Crosses with union disconnect, 2 drain & 2 top ports. “E” Series light pattern brass tank crosses compete with Merrill & Boshart equivalents. • Metal to metal ball joint seal on NO LEAD brass crosses. • Teflon gasket seal on 304SS crosses. Part Overall Number Length NO LEAD Brass Tank Conn. Leg Conn. Drain Ports Top Ports Size (Qty) Size (Qty) CIC100BSUENL 11” CIC100BSU14ENL 14” CIC125BSU14ENL 14” 1” 1” 1 1/4” 1” x 3/4” 1” x 3/4” 1 1/4” x 1” 1/2” (2) 1/2” (2) 3/4” (2) 1” 1” 1 1/4” 1” x 3/4” 1” x 3/4” 1 1/4” x 1” 1/2” (2) 1/2” (2) 3/4” (2) Material USA or Import Ctn Qty List Price 1/4 “(2) 1/4 “(2) 1/4 “(2) No Lead Brass No Lead Brass No Lead Brass Import Import Import 2/20 2/12 2/12 $ 53.95 64.11 78.75 1/4 “(2) 1/4 “(2) 1/4 “(2) 304 Stainless 304 Stainless 304 Stainless Import Import Import 2/20 2/20 2/12 77.68 88.75 111.79 304 Stainless Steel CIC100SSU CIC100SSU14 CIC125SSU14 6/14/11 1.10b 11” 14” 14” TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Tank Crosses - Long Cast General Tank Cross Features: • Internal and external threads reduce fittings needed and installation time. • Reduces turbulence and waterlogging in tanks without separate air chambers. • Cast bronze, brass, injected molded PVC, galvanized ductile iron. • For individually boxed crosses, remove “C” prefix and add $2.25 to list price. Long Cast Tank Crosses with 1 drain and 2 top ports. “E” Series light pattern brass tank crosses compete with Merrill & Boshart equiva- Part Number CHC100BSE CHC100BS CHC100B Overall Length Tank Conn. Leg Conn. Drain Ports Size (Qty) Top Ports Size (Qty) Material USA or Import 11” 11” 11” 1” 1” 1” 1” x 3/4” 1” x 3/4” 1” x 3/4” 1/2” (1) 1/2” (1) 1/2” (1) 1/4” (2) 1/4” (2) 1/4” (2) Brass Brass Bronze Import Import USA Ctn Qty List Price 2/24 $ 44.29 2/24 50.64 12 62.32 Long Cast Tank Crosses with 2 drain and 2 top ports. “E” Series light pattern brass tank crosses compete with Merrill & Boshart equivalents. Part Number CIC100BSE CIC100BS CIC100B CIC100BS14 CIC125BS14E CIC125BS14 Overall Length Tank Conn. Leg Conn. Drain Ports Size (Qty) Top Ports Size (Qty) Material USA or Import 11” 11” 11” 14” 14” 14” 1” 1” 1” 1” 1 1/4” 1 1/4” 1” x 3/4” 1” x 3/4” 1” x 3/4” 1” x 3/4” 1 1/4” x 1” 1 1/4” x 1” 1/2” (2) 1/2” (2) 1/2” (2) 1/2” (2) 3/4” (2) 3/4” (2) 1/4” (2) 1/4” (2) 1/4” (2) 1/4” (2) 1/4” (2) 1/4” (2) Brass Brass Bronze Brass Brass Brass Import Import USA Import Import Import Ctn Qty List Price 2/24 $ 39.11 2/24 50.64 12 62.89 2/20 56.39 2/12 86.81 15 101.96 Long Cast Tank Crosses with union disconnect, 1 drain and 2 top ports. • Metal to metal ball joint seal. Part Number CHC100BU CHC125BU14 Overall Length Tank Conn. Leg Conn. Drain Ports Size (Qty) Top Ports Size (Qty) Material USA or Import 11” 14” 1” 1 1/4” 1” x 3/4” 1 1/4” x 1” 1/2” (1) 3/4” (1) 1/4” (2) 1/4’ (2) Bronze Bronze Import Import Ctn Qty List Price 2/20 $ 69.77 2/12 108.95 Long Cast Tank Crosses with union disconnect, 2 drain and 2 top ports. “E” Series light pattern brass tank crosses compete with Merrill & Boshart equivalents. • Metal to metal ball joint seal. Part Number Overall Length Tank Conn. Leg Conn. Drain Ports Size (Qty) Top Ports Size (Qty) Material USA or Import CIC100BU85 CIC100BSUE CIC100BU CIC100BU14 CIC125BSU14E CIC125BU14 8 1/2” 11” 11” 14” 14” 14” 1” 1” 1” 1” 1 1/4” 1 1/4” 1” x 3/4” 1” x 3/4” 1” x 3/4” 1” x 3/4” 1 1/4” x 1” 1 1/4” x 1” 1/2” (2) 1/2” (2) 1/2” (2) 1/2” (2) 3/4” (2) 3/4” (2) 1/4” (2) 1/4 “(2) 1/4 “(2) 1/4 “(2) 1/4 “(2) 1/4 “(2) Bronze Brass Bronze Bronze Brass Bronze Import Import Import Import Import Import TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Ctn Qty List Price 2/20 $ 67.61 2/20 59.64 2/20 69.77 2/20 74.14 2/12 90.04 2/12 103.85 6/14/11 1.11 Tank Crosses - Long, Fabricated General Tank Cross Features: • Internal and external threads reduce fittings needed and installation time. • Reduces turbulence and waterlogging in tanks without separate air chambers. •Cast bronze, brass, injected molded PVC, galvanized ductile iron. • Prices are for bulk packaged tank crosses. • For individually boxed crosses, remove “C” prefix and add $2.25 to list price. Long Fabricated Tank Crosses with 1 drain and 2 top taps. • Crosses fabricated with 96.5% tin, 3.5% lead free solder. Part Number CHC100BF CHC100BF13 CHC125BF CHC125BF16 Overall Length Tank Conn. Leg Conn. Drain Ports Size (Qty) Top Ports Size (Qty) Material USA or Import Ctn Qty List Price 11” 13” 14” 16” 1” 1” 1 1/4” 1 1/4” 1” x 3/4” 1” x 3/4” 1 1/4” x 1” 1 1/4” x 1” 1/2” (1) 1/2” (1) 3/4” (1) 3/4” (1) 1/4” (2) 1/4” (2) 1/4” (2) 1/4” (2) Bronze/Copper Bronze/Copper Bronze/Copper Bronze/Copper USA USA USA USA 12 12 12 6 $ 65.82 71.54 81.94 87.04 Long Fabricated Tank Crosses with 2 drain and 2 top taps. • Crosses fabricated with 96.5% tin, 3.5% lead free solder. Part Number CIC100BF CIC100BF13 CIC125BF CIC125BF16 Overall Length Tank Conn. Leg Conn. Drain Ports Size (Qty) Top Ports Size (Qty) Material USA or Import Ctn Qty List Price 11” 13” 14” 16” 1” 1” 1 1/4” 1 1/4” 1” x 3/4” 1” x 3/4” 1 1/4” x 1” 1 1/4” x 1” 1/2” (2) 1/2” (2) 3/4” (2) 3/4” (2) 1/4” (2) 1/4” (2) 1/4” (2) 1/4” (2) Bronze/Copper Bronze/Copper Bronze/Copper Bronze/Copper USA USA USA USA 12 12 12 6 $ 65.00 71.54 80.36 83.46 Ctn Qty List Price Long Fabricated Elevated Tank Crosses with union disconnect. • Crosses fabricated with 96.5% tin, 3.5% lead free solder. Part Number Overall Length Tank Conn. Leg Conn. Drain Ports Size (Qty) CIC740BF CIC741BF 18” 18” 1” 1 1/4” 1” x 3/4” 1 1/4” x 1” 1/2” (2) 3/4” (2) 2/15/11 1.12 TM Top Ports Size (Qty) Material 1/4” (2) Bronze/Copper 1/4“(2) Bronze/Copper USA or Import USA USA 9 $ 151.46 6 243.05 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Pressure Relief Valves RV and IRV Series Relief Valve Features: • Heavy duty brass, no lead brass (CA AB1953 certified) or 304 stainless steel for shallow, deep well and submersible pumps. • Spring loaded and pre-set under pressure, NOT ADJUSTABLE. • 1/2” or 3/4” (IRV7575) discharge. • RV Series are manufactured for AGI in an ISO 9001 facility. • IRV series imported. Hamilton Adjustable Safety Relief Valve Features: • Preset at 75 P.S.I. with concealed adjusting screw to prevent tampering. • Brass-heavy duty. • Full-flow design with Buna-N seats. RV Series ISO 9001 Part Number Size Bronze Relief Valves - Made in USA RV50 1/2”x 1/2” RV75 3/4”x 1/2” RV50-100 1/2” x 1/2” RV75-100 3/4” x 1/2” Pressure Setting Ctn/Case List Price Set at 75 psi Set at 75 psi Set at 100 psi Set at 100 psi 50/150 50/150 50/150 50/150 $ 18.52 19.16 18.52 19.16 Brass Relief Valves - Imported IRV50 1/2”x 1/2” IRV75 3/4”x 1/2” IRV7575 3/4”x 3/4” IRV50-100 1/2” x 1/2” IRV75-100 3/4” x 1/2” IRV7575-100 3/4” x 3/4” Set at 75 psi Set at 75 psi Set at 75 psi Set at 100 psi Set at 100 psi Set at 100 psi 10/100 10/100 10/100 10/100 10/100 10/100 9.66 9.99 11.25 9.66 9.99 11.25 NO LEAD Brass Relief Valves - Imported IRV50NL 1/2”x 1/2” IRV75NL 3/4”x 1/2” IRV50-100NL 1/2” x 1/2” IRV75-100NL 3/4” x 1/2” Set at 75 psi Set at 75 psi Set at 100 psi Set at 100 psi 10/100 10/100 10/100 10/100 10.76 11.30 10.54 10.54 304 Stainless Steel Relief Valves - Imported IRV50SS 1/2”x 1/2” IRV75SS 3/4” x 3/4” IRV50-100SS 1/2” x 1/2” IRV75-100SS 3/4” x 1/2” Set at 75 psi Set at 75 psi Set at 100 psi Set at 100 psi 10/100 10/100 10/100 10/100 21.79 23.04 21.79 23.04 Hamilton Brass Adjustable Safety Relief Valves HRV50 1/2” mipt x 1/2” fipt HRV75 3/4” mipt x 3/4” fipt HRV175 1” mipt x 3/4” fipt HRV125 1 1/4” mipt x 1 1/4” fipt Set at Adjustable to Sold at Preset Only 75 psi 150 psi 25 47.72 75 psi 100 psi 25 70.26 75 psi 200 psi 25 115.72 75 psi 200 psi 10 218.37 IRV IRV-NL Series IRV SS Series HRV Series NOTE: Relief valves on this page are not for use with hot water heaters. Recommended for cold water system installations only. Preset relief valves are NOT intended to be adjusted. Any adjustment to preset relief valves voids warranty. TM FLOW RATES PSI RV Series gpm IRV Series gpm PSI HRV50 HRV75 HRV175 HRV125 85 .30 2.0 90 7.3 2.7 95 7.7 3.8 100 9.8 4.7 105 17.9 7.0 110 18.9 12.0 115 20.6 12.7 10 .6 20 1.5 6.0 12.0 12.6 35.0 30 2.5 2.8 19.0 48.4 40 3.6 5.5 24.6 69.2 60 6.1 11.0 35.6 106.5 80 8.8 13.8 44.8 132.5 100 11.8 17.9 52.3 150.0 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 1.23 Installation Accessories - Tank Tank Legs Features: • Elevates tank above floor and out of condensation pools. • Leveled on uneven floors without the use of tools. • Custom molded from high strength ABS. TL3 Pump Mounting Bracket Features: PMB1 • Elevates pump out of corrosive atmosphere. • Heavy duty 12 gauge cold rolled steel with gray enamel coating. Heaviest steel gauge bracket available in the market. • Plastic protectors on the pump stand legs prevent scratching of the tank. • Supplied with 1", 1 1/4" zinc plated steel screws and steel adapter for larger tanks. • Fits all pumps and comes individually cartoned. Air Valve Features: • Used for reciprocating and submersible pumps to admit air to system. • Used for charging applications and many other uses. • Available in long and short patterns. SN18L, SN18. SN25L, SN25 Pressure Test Gauge Features: • 0-100 psi, 2" plastic lens. • Brass test fitting with pressure release button. • Heavy rubber boot to protect gauge from damage. PTG1002 Part Number Size Pressure Setting/Description Ctn Qty List Price (3/Package), ABS 48 $ 3.45 12 gauge steel plate, Gray 20 24.47 25/250 25/250 25/250 25/250 2.43 3.02 3.25 3.11 0.94 50 11.96 Tank Legs TL3 Pump Mounting Brackets PMB1 Air Valves SN18 SN18L SN25 SN25L LVC18 1/8” 1/8” 1/4” 1/4” Short, Light Spring (Snifter) Long, Light Spring (Snifter) Short, Heavy Spring (Air) Long, Light Spring (Snifter) Replacement Core for light spring models Pressure Test Gauge PTG1002 6/14/11 1.24 Pressure test gauge TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Clear Braided PVC Hose Clear Braided PVC Hose Standard Wall, Class 125 Features: • Flexible, see through clear hose with braid pattern reinforcement of two polyester spirals. • Flexible clear PVC NSF 51 certified to 100ºF (38ºC), USP CLASS V1 rated. • All hose compound ingredients used are listed in US FDA CFR, Title 21. • Temperature range + 25º to 150º F / -5º to +65ºC. • Silicone free. • Food and beverage grade, standard wall. • Use for air, water lines. Part Number Nominal (inches) ID OD CBH316-1 CBH25-1 CBH516-1 CBH38-1 CBH50-1 CBH50-3 CBH58-1 CBH75-1 CBH75-3 CBH100-1 CBH100-2 CBH125-50 CBH125-1 CBH150-50 CBH150-1 CBH200-50 CBH200-1 3/16 1/4 5/16 3/8 1/2 1/2 5/8 3/4 3/4 1 1 1 1/4 1 1/4 1 1/2 1 1/2 2 2 0.375 0.438 0.525 0.594 0.750 0.750 0.875 1.030 1.030 1.300 1.300 1.625 1.625 1.937 1.937 2.490 2.490 Max Working Pressure PSI@68ºF PSI@122ºF 250 250 250 225 200 200 200 150 150 125 125 100 100 100 100 75 75 105 105 105 97 86 86 86 65 65 54 54 43 43 43 43 33 33 Reel Length Approx Wt per CFT. List Price Per Reel 100’ 100’ 100’ 100’ 100’ 300’ 100’ 100’ 300’ 100’ 200’ 50’ 100’ 50’ 100’ 50’ 100’ 4.5 lbs 5.7 lbs 7.5 lbs 9.0 lbs 13.8 lbs 13.8 lbs 16.5 lbs 21.9 lbs 21.9 lbs 31.5 lbs 31.5 lbs 45.0 lbs 45.0 lbs 64.0 lbs 64.0 lbs 95.0 lbs 95.0 lbs $ 117.06 102.32 150.56 145.37 195.91 587.73 231.09 293.71 881.15 378.42 707.34 359.08 718.17 432.96 865.91 739.93 1479.89 ** Temperatures higher than 68º F reduce available working pressure. See next page for temperature, working pressure calculation chart and cautionary note. TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 1.25 Clear Braided PVC Hose Effects of Elevated Temperatures on Thermoplastic Hose. The compounds used in clear braided PVC hose are generally referred to as thermoplastics. These materials achieve their optimum physical properties at room temperature, 68ºF (20ºC). As these materials are exposed to increased ambient temperatures, they will soften and their physical properties will change. This will have the effect of sharply reducing the available working pressure. Coupling retention will also be reduced. The charts below illustrate this effect. In all cases, the product should be tested in a controlled, secure and safe environment, and all operating conditions should be considered prior to use. All published working pressures of AGI Series CBH hose are based on a room temperature of 68ºF (20ºC). Example from the Fahrenheit Chart If working pressure at 68ºF is 200 psi, then the WP at 110ºF is 200 x 50%, or 100 psi Example from the Celsius Chart If working pressure at 20º is 14 bar, then the WP at 50ºC is 14 x 50%, or 5.6 bar CAUTIONARY NOTE The charts are to used as a guideline only. The information and recommendations contained here are, to the best of our manufacturer’s knowledge, accurate and reliable, but no guarantee of their accuracy is made. All products are sold upon the condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses, and purchasers assume all risks and liability for the results of use of the products, including use in accordance with seller’s recommendations. Variability in length of exposure, temperature, pressure, velocity of fluid, and chemical concentration all contribute to reduced working pressure and hose reliability. 4/2009 1.26 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Air Volume Controls Brady Air Volume Control Features: • • • • • • • AV Non-Repairable Maintains water flow-stretches pump life. Repairable and non-repairable offering. Diaphragm-type air volume control maintains correct proportions of air & water in jet systems. Die Cast, 96% Zinc. Individually cartoned. Available with or without Tapped Gauge Port. “E” Series compares to Boshart “AVC” and Merrill “AV” series non-repairable controls. Air Charger Features: • • • • • • AV Repairable For jet systems. Positive action control. No flexing diaphragm or metal springs to malfunction. Will not corrode in a moist environment. Fits all tanks up to and including 82 gallon. Available with tube & fittings as an optional extra, specify AC100TF. Includes 60” tubing & assortment of special brass fittings & adapters, eliminates duplication of inventories with a single kit for all applications. Universal Air Charger Installation Kit Features: • • Fits all air volume controls. Includes 60” polyethylene tubing and assortment of special brass fittings and adapters, eliminating duplication of inventories with a single kit for all applications. * AC100 Part Number (Tapped) Non-repairable * Tank Capacity AV45E AV45 AV45F AV100E AV100 AV100F Tank Port Suction Port Ctn Qty 80 80 80 120 120 120 1/4” pipe 1/4” pipe 1/4” pipe 3/8” pipe 3/8” PIPE 3/8” PIPE 7/16”-24 pipe 7/16”-24 pipe 1/8” pipe tap 7/16”-24 pipe 7/16”-24 PIPE 1/8” PIPE TAP 50 50 50 50 50 50 42 80 120 220 1/4” PIPE 1/4” pipe tap 1/4” pipe tap 3/8” pipe tap 7/16”-24 PIPE 1/4” pipe tap 1/4” pipe tap 1/4” pipe tap 100 50 50 25 Tapped List Price Standard List Price $ 12.32 30.14 31.54 12.32 34.13 36.18 Repairable * AV30 AV42 AV80 AV120 AV42T AV80T AV120T 45.36 53.11 69.68 33.20 43.36 50.28 66.79 Repair Kits• Fits all makes of repairable diaphragm type controls AV30-3A AV42-3A AV80-3A AV120-3A For Brady AV30 controls For Brady AV42 controls For Brady AV80 controls For Brady AV120 controls 42 42 42 42 26.33 30.94 36.17 47.38 Plastic Air Charger * AC100 CAC100 30 Bulk Packed 21.13 17.88 Air Charger with Tubing and Fittings ** AC100TF AC100TFBT Black Tubing 20 20 27.27 27.27 24 24 12.44 12.93 Air Charger Installation Kit with Tubing and Fittings ** UTF1 UTF1BT Black Tubing ** See page 6.7 for additional lengths of MV4040 1/2” OD x 0.17” ID translucent and black tubing. TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 1.27 Air Releases & Controls HARVARD All Plastic Deep Well Air Release Features: • Formerly Robert Shaw* AE10 (*used with permission of Invensys Controls) • Maintains proper ratio of air to water in submersible water systems. • All polyethylene construction eliminates corrosion. • Includes gauge port and 0-40 psi limited bleed adjustment. • Made in USA. HAE1 Formerly Robert Shaw/Invensys Brady Plastic Deep Well Air Release Features: BAR125N WJ1 HF93B1 • • • • Maintains the proper ratio of air to water. Constructed of ABS resin grade plastic. Non-corrosive, non-conductive and completely serviceable. Release mechanism consists of a Buna-N procession ball & 316 stainless steel spring. • Factory set at 20 P.S.I., adjustable from 0 to 40 P.S.I. Deep Well Air Release Features: • Maintains proper ratio of air to water in submersible water systems. • Deluxe deep well air release features ABS float and cast body which prevents galvanic action at pump tank tapping. • WJ1 Imported. Shallow Well Control Features: SWCL • Preserves correct proportion of water and air in shallow well reciprocating pump systems. • Imported. Part Number Tapping Manufacturer Ctn Qty List Price All Plastic Deep Well Air Release HAE1 BAR125N 1 1/4” 1 1/4” Harvard (formerly Robert Shaw) Brady 49 50 $ 45.71 37.75 1 1/4” 1 1/4” Ametek Johnson 20 50 58.86 38.62 1 1/4” Ametek 20 66.35 Deep Well Air Release WJ1 HF93B-1 Shallow Well Control SWCL 6/14/11 1.28 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Installation Accessories - Submersible Deluxe Torque Arrestor Features: • Two piece design, molded from PVC or rubber. • PVC torque arrestor is 40% heavier than competitors to resist long-term casing abrasion. • Field adjustable to hold pump centered in well. • Fits all well casings from 4” to 8” I.D. • Torque Arrestor is securely fastened to 1” or 1 1/4” drop pipe w/ 2 Ideal all stainless steel clamps included. • Available bagged, boxed or bulk without clamps. TA48 Submersible Torque Arrestor Features: TA6100 SG Series • "Spider" style molded from rubber. • Installs at discharge cap of submersible pump. • Tabs are easily cut for field alteration. • 4”-6” casing, 1” center hole. Natural Rubber Pump Guide Features: • Installed at the top of the submersible discharge cap. • Permits the pump to be lowered without damage from abrading against the well casing & ledge while centering the pump in the well. Cable Guard Features: MG6 WG Series • Snap-in and self clamping styles. • Keeps power cable from abrading against well casing. • A minimum of three to five should be used; one at the pump, one no further than 15’ above the pump, and one between 25’ and 30’ above the pump. • Adjustable - use in 4”, 5” and 6” wells. Available for 1” or 1 1/4” drop pipe. • Made of polyethylene and will float. Part Number Description Deluxe PVC Torque Arrestor TA48 TA48B CTA48 Color Bagged, with 2 Ideal all stainless steel clamps Boxed, with 2 Ideal all stainless steel clamps Bulk, no clamps Ctn Qty List Price Black Black Black 16 12 Bulk $ 12.32 15.00 9.36 Black Black Black 16 12 Bulk 15.68 18.36 13.93 Black 50 26.19 Bulk Bulk Bulk Bulk Bulk Bulk Bulk Bulk 4.89 4.89 5.30 8.10 9.00 9.00 10.28 9.73 100 48 48 0.96 2.93 4.86 Deluxe Rubber Torque Arrestor TA48R TA48RB CTA48R Bagged with 2 Ideal all stainless steel clamps Boxed, with 2 Ideal all stainless steel clamps Bulk, No clamps Standard Rubber Torque Arrestor TA6100 6x1, (spider type) Natural Rubber Pump Guides Fits Casing ID Guide OD Drop Pipe SG400-3X1 SG400-3X11/4 SG500-4X1 SG558-5X1 SG600-55/8X1 SG600-55/8X11/4 SG625-6X1 SG625-6X2 3” 3” 4” 5” 5 5/8” 5 5/8” 6” 6” 1” 1 1/4” 1” 1” 1” 1 1/4” 1” 2” 4” 4” 5” 5-5/8” 6” 6” 6 1/4” 6 1/4” Cable Guard MG6 WG100 WG125 With two cable holes, fits 4”-6” casing, Polyethylene 1” Self-clamping style, fits 4”-6” casing 1 1/4” Self-clamping style, fits 4”-6” casing TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 1.29 Installation Accessories - Submersible Submersible Safety Rope Features: • • • • Custom extruded from tough polypropylene fiber. Highly resistant to chafing, abrasion &corrosion. Recommended wherever minimum stretch and maximum strength are required. Twisted SR25 Series tested in excess of 1,200 lbs.. Braided MR25 Series tested in excess of 1,000 lbs. • Plastic or wood reels. MR Series Bleeder Orifices Features: • Provides a fast bleed through its large opening. • Complete closure prevents loss of pumping volume. • Full 1” size molded of virgin rubber increases bleed capacity & reduces cost of pipe fitting. • 3/4” available in brass. • Bleeder orifice tee available. Includes yellow brass insert tee w/ 1” rubber bleeder orifice. PO100 Ejector Screen Features: • Protects heat pumps against plugged nozzles and clogged venturis. • Non-corrosive brass or stainless steel screen. • Installs easily in discharge side of ejector. Cable Tie Features: ES CT Series • • • • • UL approved, self-clinching nylon fastener. Ideal for holding cable to drop pipe, positioning cable guards, etc. Withstands -65º to 225ºF. Packaged in bags of 100. Manufactured for AGI in an ISO 9002 facility. Part Number Description ISO 9002 Ctn Qty List Price Braided Safety Rope MR25-500 MR25-1 MR25-3 Blue/White, 1/4” x 500’ Plastic Reel, 1000# Blue/White, 1/4” x 1000’ Plastic Reel, 1000# Blue/White, 1/4” x 3000’ Plastic Reel, 1000# 1 1 1 $ 34.93 62.57 197.32 Black, 1/4” x 500’ Plastic Reel, 1200# Black, 1/4” x 1000’ Plastic Reel, 1200# Black, 1/4” x 3000’ Plastic Reel, 1200# 1 1 1 50.89 98.93 305.54 Twisted Safety Rope SR25-500 SR25-1 SR25-3 Bleeder Orifices PO75B PO100 BOT100 3/4”, Brass 1”, Rubber, 25 per bag Yellow Brass Insert Tee 1”, w/rubber bleeder orifice 25/250 100 6 11.61 2.04 45.18 Brass Screen Stainless Steel Screen 1 1 9.40 9.02 Bag of 100 Nylon, 1” to 1 1/4” diameter pipe, 8” long Bag of 100 Nylon, 1 1/2” to 4” diameter pipe, 15 ” long 1 1 6.18 /100 14.42 /100 Ejector Screen ES1 ES1S Cable Ties CT150 CT300 6/14/11 1.30 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Pump Installation Adapters & Fittings Features: • Heavy pattern, contractor grade cast bronze or stainless steel material. • Rope adapters have integral pad eye for easy use with submersible rope. SEE PAGE 12.3 and 12.4 for a complete line of imported cast bronze insert fittings. Part Number Size Style * ☺ Imported # Barbs Ctn/CaseQty List Price Cast Bronze Male Insert Adapters (INS x MIP) RBMA1/2 RBMA3/4 RBMA1 RRBMA1 RBMA1X3/4 RBMA1X11/4 RBMA11/4 RBMA11/4X1 RBMA11/2 RBMA11/2X11/4 RBMA2 RBMA RRBMA 1/2” x 1/2” 3/4” x 3/4” 1” x 1” 1” x 1” 1” x 3/4” 1” x 11/4” 1 1/4” x 1 1/4” 1 1/4” x 1” 1 1/2” x 1 1/2” 11/2” x 1 1/4” 2” x 2” Hex Hex Hex Round Hex Hex Hex Hex Hex Hex Hex 5 5 7 6 5 6 6 7 6 6 7 10/200 10/200 10/100 10/100 10/100 10/100 10/100 10/100 5/50 10/100 5/50 $ 7.04 9.00 13.41 13.79 10.79 16.75 17.96 17.32 20.79 18.89 33.71 12 12 12 12 10/100 10/100 10/100 5/50 20.18 20.32 23.93 41.64 6 6 10/80 10/40 22.78 20.33 Round w/ rope eye Round w/ rope eye Round w/ rope eye 11 6 6 10/100 10/100 10/100 15.61 17.51 19.64 Heavy duty ☺ HD long pattern ☺ 9 9 10/50 10/50 31.55 36.23 5 5 5 7 6 7 10/200 10/100 10/100 10/100 5/50 5/50 9.11 11.57 16.93 19.54 23.68 36.96 Cast Bronze Extra Long Male Adapters (INS x MIP) XLRBMA1 XLRBMA1x11/4 XLRBMA11/4 XLRBMA2 1” x 1” 1” x 1 1/4” 1 1/4” x 1 1/4” 2” x 2” Hex Hex Hex Hex Cast Bronze Male Union Adapters (INS x MIP) XLRBMA RBMUA1 RBMUA11/4 1” x 1” 1 1/4” x 1 1/4” Hex Hex Cast Bronze Rope Adapters (INS x MIP) ☺ RBRA1 RBRA1X11/4 RBRA11/4 RBMUA 1” x 1” 1” x 1 1/4” 1 1/4” x 1 1/4” Cast Bronze Rope Adapters (INS x MIP) BDR125 BW100 1”x1 1/4” 1” Cast Bronze Female Adapters (INS x FIP) ☺ RBRA RBFA1/2 RBFA3/4 RBFA1 RBFA11/4 RBFA11/2 RBFA2 1/2” x 1/2” 3/4” x 3/4” 1” x 1” 1 1/4” x 1 1/4” 1 1/2” x 1 1/2” 2” x 2” Round Round Round Round Round Round RBFA Cast Stainless Steel Male Insert Adapters (MIP xINS) ☺ SSMA1/2 SSMA3/4 SSMA1 SSMA11/4 SSMA11/4X1 XLSSMA11/4X1 SSMA11/2 SSMA2 1/2" 3/4" 1” 1 1/4” 1 1/4” x 1” 1 1/4” x 1” 1 1/2" 2" Hex Hex Hex Hex Hex Hex (Heavy pattern xlong) Hex Hex Grade 304 * 6 6 6 6 6 13 6 6 10/100 10/200 10/100 5/100 5/100 5/60 5/80 5/40 8.18 10.26 17.00 20.71 18.00 46.86 26.89 37.49 SSMA TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 1.31 Pump Installation Adapters & Fittings Part Number Size Style # Barbs Ctn/CaseQty List Price Cast Stainless Steel Male Insert Adapters (MIPxINS) Made in USA Grade 316 * SS12-1/2 SS12-3/4 SS12-1 SS12-11/4 SS12-11/2 SS12-2 SS38-11/4 X1 SS12 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 1 1/4” x 1” Round Round Round Round Round Round Round 6 7 7 6 6 7 7 Cast Stainless Steel Hex Bushing (MIPxFIP) ☺ SSHB SSHB1X1/4 SSHB1X1/2 SSHB1X3/4 SSHB11/4x1 1” x 1/4” 1” x 1/2” 1” x 3/4" 1 1/4" x 1" 25/300 25/200 20/160 20/120 10/60 10/40 25 21.17 19.49 22.08 36.20 49.01 64.41 52.13 Grade 304 * Hex Hex Hex Hex - 10/200 10/200 10/200 10/160 7.54 7.54 8.61 11.82 10 10 26.66 36.03 25 15 13.11 21.54 5 5 96.50 181.67 25 25 25 25 25 25 25 25 25 20 25 18.05 21.49 21.76 13.71 16.56 18.60 21.24 18.66 21.01 25.34 32.46 60 50 40 50 40 30 5.43 7.95 9.44 7.46 9.27 11.05 25/100 25/100 25/100 25/100 44.84 59.07 66.40 87.43 Steel Well Seal Elbows (INS x INS) ** S99-1 S99-11/4 1” 1 1/4” Steel Well Seal Elbows (INS x INS) - IMPORTED ☺ ISWSE100 ISWSE125 1” 1 1/4” * S99, ISWSE, B99 Brass Well Seal Elbow, ins x ins** B99-1 B99-11/4 1” 1-1/4” Steel Venturi Adapter, mipt x ins ** S86, ISVMA, B86 S86-3/4X6 S86-3/4X10 S86-3/4X12 S86-1X6 S86-1X8 S86-1x10 S86-1X12 S86-11/4X6 S86-11/4X8 S86-11/4X10 S86-11/4X12 3/4" x 6” 3/4" x 10" 3/4 x 12” 1" x 6" 1" x 8" 1" x 10" 1" x 12" 1-1/4" x 6" 1-1/4" x 8" 1-1/4" x 10" 1-1/4" x 12” Steel Venturi Adapter, mipt x ins IMPORTED ☺ ISVMA1X6 ISVMA1X8 ISVMA1X10 ISVMA11/4X6 ISVMA11/4X8 ISVMA11/4X10 1" x 6" 1" x 8" 1" x 10" 1-1/4" x 6" 1-1/4" x 8" 1-1/4" x 10" * ** Red Brass Venturi Adapter, ins x mipt ** * ☺ Imported 6/14/11 1.32 B86-1X6 B86-1X8 B86-11/4X6 B86-11/4X8 1" x 6" 1" x 8" 1-1/4" x 6" 1-1/4" x 8" TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Flow Control Valves - Dole Dole Flow Control Valve Features: • • • • Prevents over-pumping of low yield wells. Installs in the discharge line between check valve and pressure tank. Do not use to suspend pipe. Self cleaning, designed to deliver constant volume of water over wide pressure drop range. • Flow rated maintained within +/- 15% up to a pressure drop of 125 psi. • Maximum system pressure 200 psi. • Carton Quantity is 1 for all items. NEW OLD Part Number GA, GB, GC, GX Series 3/8” - 1”fipt Brass Housing/ Nickle Plated GY Series 3/4 mipt” x 3/4”fipt Brass Housing/ Nickle Plated GP GT, GF, GH, GK Series 1 1/4” - 3” mipt Steel Housing/ Zinc Plated TM Flow (GPM) Inlet/ Outlet List Price Brass Housing/Nickel Plated GA.06 0.06 GA.13 DV.13 0.13 GA.19 DV.19 0.19 GA.25 DV2.5 0.25 GA.35 0.35 GA.50 DV5 0.50 GA.75 DV75 0.75 GA1.0 DV10 1.0 3/8” FIPT 3/8” fipt 3/8” fipt 3/8” fipt 3/8” fipt 3/8” fipt 3/8” fipt 3/8” fipt $ 53.50 53.50 53.50 53.50 53.50 53.50 53.50 53.50 GB1.0 GB1.5 GB2.0 GB2.5 GB3.0 GB3.5 GB4.0 GB5.0 GB6.0 DV10-1/2 DV15 DV20 DV25 DV30 DV35 DV40 DV50-1/2 DV60-1/2 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 6.0 1/2” fipt 1/2” fipt 1/2” fipt 1/2” fipt 1/2” fipt 1/2” fipt 1/2” fipt 1/2” fipt 1/2” fipt 55.48 55.48 55.48 55.48 55.48 55.48 55.48 55.48 55.48 GC1 GC1.5 GC2.0 GC2.5 GC3.0 GC3.5 GC4.0 GC5.0 GC6.0 GC7.0 GC8.0 GC9.0 GC10 GC11.5 DV1.0 DV2.0 DV2.5-3/4 DV30-3/4 DV3.5-3/4 DV40-3/4 DV50 DV60 DV70 DV80 DV90 DV100 DV115 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.5 3/4” fipt 3/4” fipt 3/4” fipt 3/4” fipt 3/4” fipt 3/4” fipt 3/4” fipt 3/4” fipt 3/4” fipt 3/4” fipt 3/4” fipt 3/4” fipt 3/4” fipt 3/4” fipt 69.09 69.09 69.09 69.09 69.09 69.09 69.09 69.09 69.09 69.09 69.09 69.09 69.09 69.09 GY1.0 GY1.5 GY2.0 GY2.5 GY3.0 GY3.5 GY4.0 GY5.0 GY6.0 GY7.0 DV1-3/4MXF DV1.5-3/4MXF DV2-3/4MXF DV2.5-3/4MXF DV3-3/4MXF DV3.5-3/4MXF DV4-3/4MXF DV5-3/4MXF DV6-3/4MXF DV7-3/4MXF 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 6.0 7.0 3/4”mipt x fipt 3/4”mipt x fipt 3/4”mipt x fipt 3/4”mipt x fipt 3/4”mipt x fipt 3/4”mipt x fipt 3/4”mipt x fipt 3/4”mipt x fipt 3/4”mipt x fipt 3/4”mipt x fipt 65.91 65.91 65.91 65.91 65.91 65.91 65.91 65.91 65.91 65.91 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 1.35 Flow Control Valves - Dole NEW OLD Part Number Flow (GPM) Inlet/ Outlet List Price 3/4”mipt x fipt 3/4”mipt x fipt 3/4”mipt x fipt 3/4”mipt x fipt $ 65.91 65.91 65.91 65.91 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.0 9.0 10.0 12.0 13.5 15.0 20.0 25.0 30.0 1” fipt 1” fipt 1” fipt 1” fipt 1” fipt 1” fipt 1” fipt 1” fipt 1” fipt 1” fpt 1” fpt 1” fpt 1” fipt 1” fipt 1” fipt 1” fipt 1” fipt 1” fipt 1” fipt 133.12 133.12 133.12 133.12 133.12 133.12 133.12 133.12 133.12 133.12 133.12 133.12 133.12 133.12 133.12 133.12 133.12 133.12 133.12 Steel Housing/Zinc Plated GP1.0 DV1.0-11/4 GP1.5 GP2.0 GP2.5 GP3.0 GP3.5 GP4.0 GP5.0 GP6.0 GP7.0 DV75-11/4 GP8.0 GP9.0 GP10 DV10-11/4 GP12 DV12-11/4 GP13.5 GP15 DV15-11/4 GP20 DV20-11/4 GP25 DV25-11/4 GP30 DV30-11/4 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 6.0 7.0 8.0 9.0 10.0 12.0 13.5 15.0 20.0 25.0 30.0 1 1/4” mipt 1 1/4” mipt 1 1/4” mipt 1 1/4” mipt 1 1/4” mipt 1 1/4” mipt 1 1/4” mipt 1 1/4” mipt 1 1/4” mipt 1 1/4” mipt 1 1/4” mipt 1 1/4” mipt 1 1/4” mipt 1 1/4” mipt 1 1/4” mipt 1 1/4” mipt 1 1/4” mipt 1 1/4” mipt 1 1/4” mipt 140.51 140.51 140.51 140.51 140.51 140.51 140.51 140.51 140.51 140.51 140.51 140.51 140.51 140.51 140.51 140.51 140.51 140.51 140.51 GT1.0 GT1.5 GT2.0 GT2.5 GT3.0 GT3.5 GT4.0 GT5.0 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 1 1/2” mipt 1 1/2” mipt 1 1/2” mipt 1 1/2” mipt 1 1/2” mipt 1 1/2” mipt 1 1/2” mipt 1 1/2” mipt 155.58 155.58 155.58 155.58 155.58 155.58 155.58 155.58 GY8.0 GY9.0 GY10 GY11.5 DV8-3/4MXF 8.0 DV9-3/4MXF 9.0 DV10-3/4MXF 10.0 11.5 GX1.0 GX1.5 GX2.0 GX2.5 GX3.0 GX3.5 GX4.0 GX5.0 GX6.0 GX7.0 GX8.0 GX9.0 GX10 GX12 GX13.5 GX15 GX20 GX25 GX30 DV10-1 DV15-1 DV20-1 DV25-1 DV30-1 DV35-1 DV40-1 DV50-1 DV60-1 DV70-1 DV80-1 DV90-1 DV100-1 DV120 DV135-1 DV150 DV200 DV250 DV300 6/14/11 1.36 DV2-11/2 DV5-11/2 TM NEW OLD Part Number Flow (GPM) Inlet/ Outlet List Price Steel Housing/Zinc Plated GT6.0 GT7.0 DV7-11/2 GT8.0 GT9.0 DV9-11/2 GT10 DV10-11/2 GT12 GT13.5 GT15 DV15-11/2 GT20 DV20-11/2 GT25 DV25-11/2 GT30 DV30-11/2 6.0 7.0 8.0 9.0 10.0 12.0 13.5 15.0 20.0 25.0 30.0 1 1/2” mipt 1 1/2” mipt 1 1/2” mipt 1 1/2” mipt 1 1/2” mipt 1 1/2” mipt 1 1/2” mipt 1 1/2” mipt 1 1/2” mipt 1 1/2” mipt 1 1/2” mipt $ 155.58 155.58 155.58 155.58 155.58 155.58 155.58 155.58 155.58 155.58 155.58 GF10 GF11.5 GF12 GF13.5 GF15 GF20 GF25 GF30 10.0 11.5 12.0 13.5 15.0 20.0 25.0 30.0 2” mipt 2” mipt 2” mipt 2” mipt 2” mipt 2” mipt 2” mipt 2” mipt 265.38 265.38 265.38 265.38 265.38 265.38 265.38 265.38 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 2-1/2” mipt 2-1/2” mipt 2-1/2” mipt 2-1/2” mipt 2-1/2” mipt 2 1/2” mipt 2-1/2” mipt 2-1/2” mipt 2-1/2” mipt 2-1/2” mipt 2-1/2” mipt 2-1/2” mipt 2 1/2” mipt 587.75 587.75 587.75 587.75 587.75 587.75 587.75 587.75 587.75 587.75 587.75 587.75 587.75 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 85.0 90.0 95.0 100.0 105.0 110.0 115.0 120.0 3” mipt 3” mipt 3” mipt 3” mipt 3” mipt 3” mipt 3” mipt 3” mipt 3” mipt 3” mipt 3” mipt 3” mipt 3” mipt 3” mipt 3” mipt 3” mipt 3” mipt 3” mipt 3” mipt 611.45 611.45 611.45 611.45 611.45 611.45 611.45 611.45 611.45 611.45 611.45 611.45 611.45 611.45 611.45 611.45 611.45 611.45 611.45 GH30 GH35 GH40 GH45 GH50 GH55 GH60 GH65 GH70 GH75 GH80 GH85 GH90 GK30 GK35 GK40 GK45 GK50 GK55 GK60 GK65 GK70 GK75 GK80 GK85 GK90 GK95 GK100 GK105 GK110 GK115 GK120 DV10-2 DV12-2 DV135-2 DV20-2 DV30-2 DV350 DV400 DV450 DV500 DV550 DV600 DV650 DV700 DV750 DV800 DV900 DV3500 DV4000 DV4500 DV5500 DV6500 DV8500 DV1000 DV1200 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Pitless Adapters - Bronze Pitless Adapter Features: PT300 • Cast from 81% COPPER content alloy bronze to insure long life and durability in the most aggressive well conditions. • Extended casing nipple makes installation easy. • Rubber inner and outer casing gaskets for certified & approved water tight seal from ground water contamination. • Built-in lowering eyelet for easier installation (except PT300). • All PT Series pitless adapters are individually boxed. • PT300T, PT800T tapped with 1/4” FPT tapping for underground well tank installations. • PT700, PT725, PT2000 made in US. PT800 PT825 PT800T PT3000 PT900 Bronze Drain and Wire Fitting Features: • Cast from bronze to insure long life and durability in the most aggressive well conditions. • Fastens to well casing to provide tapping for well drain, electrical conduit, bulkhead fittings & other related uses. • Rubber gasket seals out ground water contamination. PT700 & PT725 BWS75-100 Part Number Drop Pipe Size Nominal Well Casing PT300 PT800 PT700 PT825 PT725 PT3000 PT2000 PT900 PT300 O-Ring PT800 O-Ring 1” 1” 1” 1-1/4” 1-1/4” 2” 2” 1” & 1-1/4” (2 Hole) Fits PT300 Fits PT800, 825 and 900 5” through 8” 5” through 8” 5” through 12” 5” through 8” 5” through 12” 5 5/8” through 12” 5 5/8” through 12” 5” through 8” Casing Hole Opening 1 3/4” 1 3/4” 1 3/4” 2 1/4” 2 1/8” 3 1/8” 3 1/8” 1 3/4” & 2 1/4” Max Load Capacity (lbs.) Ctn Qty List Price 800 900 5,000 2,000 5,000 5,000 5,000 2,000 10 10 10 10 10 4 4 1 1 1 $ 45.54 74.82 144.80 151.29 222.87 461.99 552.44 427.11 3.33 3.39 1 1 49.09 78.37 TAPPED Pitless Adapters for underground tanks PT300T PT800T 1” 1” 5” through 8” 5” through 8” 1 3/4” 1 3/4” 800 900 BWS75-100 3/4” FPT x 1” MPT 5” through 8” 1 3/8” _ TM 10/60 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 27.50 6/14/11 1.55 Pitless Adapters - Clear hole, Snap-on Features: • CLEAR CASING DESIGN - no internal obstructions. • Self -supporting (750 lbs / 300’ of 1” iron pipe). • 300 series stainless steel spring, pivot pin, pull cable, Ubolt, washers, nuts and extra wide backing strap. • Built-in safety features should spring or cable fall. • Available in combination with conduit or watertight caps. • Quality American made bronze. • Easy to install. • All BA Series pitless adapters and BA-SC combination units are certified and approved watertight to PAS-97 Standards. ☺ BA Series Part Number Description Nominal Well Size” Casing O.D.” Drop Pipe” Ctn Qty List Price BA4-100 ☺ BA4-100C BA4-100SC ☺ BA4-100WT BA4-125 ☺ BA4-125C BA4-125SC ☺ BA4-125WT Pitless Adapter Only With C4 Alum Conduit Cap With SC4 ABS/Alum Cap With AWTC4 Alum Cap Pitless Adapter Only With C4 Alum Conduit Cap With SC4 ABS/Alum Cap With AWTC4 Alum Cap 4 4 4 4 4 4 4 4 4 1/2 4 1/2 4 1/2 4 1/2 4 1/2 4 1/2 4 1/2 4 1/2 1 1 1 1 1 1/4 1 1/4 1 1/4 1 1/4 1 1 1 1 1 1 1 1 $ 282.28 323.17 327.90 264.16 291.98 331.32 336.85 358.12 BA45-100 ☺ BA45-100SC ☺ BA45-125 ☺ BA45-125SC ☺ Pitless Adapter Only With SC45 ABS/Alum Cap Pitless Adapter Only With SC45 ABS/Alum Cap 4 1/2 SDR17 4 1/2 SDR17 4 1/2 SDR17 4 1/2 SDR17 4.95 4.95 4.95 4.95 1 1 1 1/4 1 1/4 1 1 1 1 285.92 342.71 296.18 256.25 BA5-100 ☺ BA5-100SC ☺ BA5-125 ☺ BA5-125SC ☺ Pitless Adapter Only With SC5 ABS/Alum Cap Pitless Adapter Only With SC5 ABS/Alum Cap 5 5 5 5 5 9/16 5 9/16 5 9/16 5 9/16 1 1 1 1/4 1 1/4 1 1 1 1 288.68 348.11 298.97 361.46 BA6-100P BA6-100PSC BA6-100S BA6-100SSC Pitless Adapter Only for Plastic Pipe With SC6 ABS/Alum Cap for Plastic Pipe Pitless Adapter Only for Steel Pipe With SC6 ABS/Alum Cap for Steel Pipe 6 6 6 6 6 5/8 6 5/8 6 5/8 6 5/8 1 1 1 1 1 1 1 1 302.63 354.62 302.63 354.62 Installation Instructions Note: Apply lubricant to o-ring on male member of body & female portion of saddle. 1. Cut 2 1/4” diameter discharge hole in casing with a 2 1/4” hole saw. Attach saddle and U-bolt. 2. File notch in top of casing above discharge hole for alignment and for easy reinstallation if pump must be pulled later. 3. Assemble pump and drop pipe to body and lower into casing with 1” support pipe longer than dim A. Note: Make sure male member snaps completely into female portion of saddle. 4. Remove 1” support pipe and attach cap. 2/15/11 1.56 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Drive Well Points Imperial Series Features: • Designed to be driven into all types of soil. • Imperial series are wrapped outside with a stainless steel screen • Stainless steel jacket over gauze construction is permanently fixed to perforated steel pipe. • Design allows the passage of all the sand free water the pipe can carry. • Cast iron drive point head can be removed for easy field extension by coupling together with the second well point for added capacity. Part No. Simmons Pipe Size Length Imperial with Outer Stainless Steel Gauze I-Series Gauze Ctn Qty List Price I90-60 I94-60 I98-60 I100-60 I102-60 I136-60 I138-60 I144-60 I168-60 I172-60 I176-60 1720-1 1721-1 1722-1 1723-1 1724-1 1740-1 1741-1 1742-1 1752-1 1753-1 1754-1 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2 2 2 2 24” 30” 36” 42” 48” 24” 30” 36” 36” 48” 60” 60 60 60 60 60 60 60 60 60 60 60 1 1 1 1 1 1 1 1 1 1 1 $ 121.81 131.88 142.11 153.44 173.75 143.98 162.35 179.33 216.43 279.67 342.83 I90-80 I94-80 I98-80 I102-80 I138-80 I144-80 1726-1 1727-1 1728-1 1730-1 1746-1 1747-1 1 1/4 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 24” 30” 36” 48” 30” 36” 80 80 80 80 80 80 1 1 1 1 1 1 121.81 131.88 142.11 173.75 162.35 179.33 Standard Series Features: • For use in rocky or sandy soil. • Standard series are wrapped inside with a stainless steel screen. • Unique corrosion resistant construction features protect stainless steel gauze held in place between galvanized pipe and a stainless steel liner. • Self flushing chamfered holes in galvanized pipe eliminate clay or sand build-up, giving maximum water yield with minimum development time. Part No. Simmons Pipe Size Length Standard Series with Inner Stainless Steel Gauze S-Series Gauze Ctn Qty List Price S94-60 S98-60 S102-60 S168-60 S172-60 S176-60 1721 1722 1724 1752 1753 1754 1 1/4 1 1/4 1 1/4 2 2 2 30” 36” 48” 36” 48” 60” 60 60 60 60 60 60 1 1 1 1 1 1 $ 132.01 142.23 173.75 216.51 279.67 342.83 S94-80 S98-80 1727 1728 1 1/4 1 1/4 30” 36” 80 80 1 1 132.01 142.23 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 10/12/10 1.67 Drive Well Point Supplies 80002C Sand Shark Valve “Sand Shark”, Backwash Valves Features: • • • • Used in soft soil to jet open-end screen to desired depth. Thickwalled, cast iron construction with saw teeth to rip through roots and debris. Solid ABS ball check keeps sand from entering well when jetting operations are complete. Not spring loaded. 8660B Backwash Valve Part Number Valve Size Pressure Pipe Tap 80002C 2" NPT Male 1” NPS Left Hand Female Part Number Pipe Size Description 8660B 2” No. 19B S/Steel Ball Ctn Qty List Price Bulk $ 75.29 Ctn Qty List Price 12 $ 72.04 Turned Coupling Features: • Used for suspending flush well points or strainers from drive shoes or tubular cylinders. • Galvanized with standard pipe thread. • Furnished with right hand pipe threads. • Thin wall 434J. 434 Series Part Number Rt. Hand Thread Pipe Size Well Size Strainer Size Coupling O.D. Coupling Length Ctn Qty List Price Turned Couplings 434J11/4X11/4 434-11/4X11/4 1-1/4 x 1-1/4” 1 1/4 X 1 1/4” 2 2 1” 1 1/4 1 13/16” 1 15/16” 2-1/4” 2 1/4 48 48 $ 5.89 6.47 Galvanized Drive Coupling Features: • Heavy pattern with deep recess for shouldering on imperfect threads of well points. • Assures proper driving of well points and standard pipe. • Taper tapped, reamed and drifted. Drive Cap Features: DC C125 • Heavy duty forged steel. • Standard pipe threads. • Vented on top. Part Number Description Galvanized Drive Couplings DC125C DC150 DC200 DC200L Pipe Size Length (in.) Ctn Qty List Price 1-1/4” 1-1/2” 2” 2” Long Pattern 1-1/4” 1-1/2” 2” 2” 2.75 2.75 2.90 3.40 40 40 30 30 $ 8.03 9.93 13.39 17.68 Heavy Duty Forged Steel Heavy Duty Forged Steel 1-1/4” 2” 32 16 13.39 23.21 Drive Caps C125 C200 6/14/11 1.68 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Pitcher Pump Pitcher Pump Features: • Recommended for shallow pump applications – depth rating up to 30'. • Easily installed. • Made of heavy cast iron. • Dark green hard enamel paint finish. • Has open spout. • 15-3/4” high. • Tapped for 1-1/4” drop pipe. • 15 lbs. • Pumps are individually packaged 4 per master carton. • Parts are carton qty 1. Part Number Description HPP10 Pitcher Pump, Cast Iron, Size #2 Master Ctn Qty List Price 4 $ 118.75 HPP10 PITCHER PUMP REPLACEMENT PARTS TM Part Number Description 118P1 118P2 * 118P3 118P4 * 118P5 * 118P6 * 118P7 118P8 118P9 118P10 * 118P11 118P12 118P13 118P14 118P15 118P16 118P17 Complete Plunger Assembly (includes *) Cup Leather for Plunger only Plunger Rod and Cage (no cup leather) Plunger Rod Plunger Cage Plunger Weight Flat Leather for Base Valve Weight and Screw for Flat Valve Flat Valve Leather and Weight Threaded Nut for Plunger Cage Pump Base with Bolts (118P15) Pump Cylinder Pump Top with Set Screw (118P17) Pump Handle with Two Bolts (118P16) 3/8 x1-1/4 Bolts for Pump Base 3/8 x 2 bolts for Pump Handle Set Screw for Pump Top www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 List Price 36.98 13.16 14.26 7.34 9.15 5.03 9.49 6.54 15.99 10.60 34.10 38.79 17.48 29.34 12.62 4.46 3.81 6/14/11 1.71 4/2009 1.72 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Cylinder Replacement Parts ® Product Number 70039E 70039F 70039G 70039H 70043C 70043D 8015C 8015D 8015E 8034D 8036A 8041A 8042C 8042D 8042E 80723A 80723B 80723C 80723D 80724A 80724B 80724C 80724D 8099B 8099C 8099D 8099E 8099G 8248B 8248D 8248E 8248G 8248H 8248J 8248R 8248T 8281N 8333BC 8333D 8333DB 8333DC 8333FB Description A40 2-1/2” x 12” Barrel Only A40 2-1/2” x 16” Barrel Only A40 3” x 12” Barrel Only A40 3” x 16” Barrel Only A40 2-1/2” Cap A40 3” Cap Top Cap 449B 1-7/8” Top Cap 449B 2-1/4” Top Cap 449B 2-3/4” Cylinder Packer Rubber 450/7039 Check Packer Rubber 450/7039 Seating Tool for 450 Cylinders Bottom Cap 449B 1-7/8” Bottom Cap 449B 2-1/4” Bottom Cap 449B 2-3/4” Plunger Assembly A40 2” Plunger Assembly A40 2 1/4” Plunger Assembly A40 2 1/2” Plunger Assembly A40 3” A40 2” Check Valve A40 2-1/4” Check Valve A40 2 1/2” Check Valve A40 3” Check Valve Plunger Poppet 442 1 11/16 & 1 13/16 Plunger Poppet 442 2” Plunger Poppet 442 2-1/4” Plunger Poppet 442 2-1/2” Plunger Poppet 442 3” Top Cap 1” Tap 442 1-11/16” Top Cap 1” Tap 442 1-13/16” Top Cap 1 1/4” Tap 442 2” Top Cap 1 1/4” Tap 442 2-1/4” Top Cap 1 1/2” Tap 442 2-1/4” Top Cap 1 1/4” Tap 442 2-1/2” Top Cap 1 1/4” Tap 442 3” Top Cap 2” Tap 442 3” Brass Base Ring 450/7039 Barrel Only 442 2-1/4” x 18” Barrel Only 442 1 11/16” x 18” Barrel Only 442 2” x 16” Barrel Only 442 1 1/4” x 20” Barrel Only 442 2 x 18” TM List Price $ 264.88 285.71 404.76 485.12 54.64 69.82 46.11 116.70 113.04 13.46 8.36 6.07 53.55 131.32 118.56 250.00 276.79 276.79 297.62 104.17 112.00 130.95 142.86 12.98 33.42 34.43 34.53 35.56 49.59 36.67 41.37 26.71 39.00 34.78 35.78 91.57 15.86 127.31 108.47 82.36 118.28 92.04 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Page 76 76 76 76 76 76 73 73 73 75 75 75 73 73 73 76 76 76 76 76 76 76 76 74 74 74 74 74 74 74 74 74 74 74 74 74 75 74 74 74 74 74 10/12/10 1.77 Cylinder Replacement Parts ® Product Number 8333H 8333HB 8333JA 8333LA 8333NA 8333NC 8333ND 8333PC 8333PD 8333R 8333RC 8333ZB 8334AB 8334BB 8334N 8334P 8334R 8334XC 8334YC 8334ZA 8334ZC 8509B 8513C 8514B 8515AP 8520B 8520F 8522A 8522B 8522C 8522D 8522F 8522J 8525C 8525D 8533C 8533D1 8533E1 8546B 8546D 8546E 8599A 8599C 6/14/11 1.78 Description Barrel Only 442 1 11/16” x 16” Barrel Only 442 2 x 20” Barrel Only 442 1 13/16” x 16” Barrel Only 442 1 13/16 x 18” Barrel Only 442 1 13/16 x 20” Barrel Only 442 2 1/2 x 18” Barrel Only 442 3 x 20” Barrel Only 442 2 1/2 x 20” Barrel Only 442 3” x 22” Barrel Only 442 1 11/16” x 22” Barrel Only 442 2 1/2” x 22” Barrel Only 442 2 1/4 x 16” Barrel Only 449 2 1/4 x 30” Barrel Only 449 2 1/4 x 36” Barrel Only 449 1 7/8 x 24” Barrel Only 449 1 7/8 x 30” Barrel Only 449 1 7/8 x 36” Barrel Only 449 2 3/4 x 24” Barrel Only 449 2 3/4 x 30” Barrel Only 449 2 1/4 x 24” Barrel Only 449 2 3/4 x 36” Cylinder End Base 450 2” Spring Dog 4500 for 450 Cylinder Plunger Assembly 450/7039 1 13/16 Check Assembly 450/7039 2” Cylinder Barrel & Base 7039 10ST Cylinder Barrel & Base 7039 14ST Plunger Assembly w/ leathers 442 1 11/16” Plunger Assembly w/ leathers 442 1 13/16” Plunger Assembly w/ leathers 442 2” Plunger Assembly w/ leathers 442 2 1/4” Plunger Assembly w/ leathers 442 2 1/2” Plunger Assembly w/ leathers 442 3” Check Poppet 450 Cylinder Plunger Poppet 450 Cylinder Check Assembly w/ leathers 449B 1 7/8” Check Assembly w/ leathers 449B 2 1/4” Check Assembly w/ leathers 449B 2 3/4” Bronze Ball 449B 1 1/16” Bronze Ball 449B 1 5/16” Bronze Ball 449B 1 11/16” Plunger Assembly w/ leathers 449B 1 7/8” Plunger Assembly w/ leathers 449B 2 1/4” TM List Price 105.42 94.56 67.66 76.70 85.42 109.31 284.39 242.25 146.14 124.55 112.94 115.36 279.02 263.24 130.49 186.76 230.86 195.44 241.47 199.19 283.03 37.47 62.61 82.75 58.37 93.19 104.71 104.58 86.27 86.22 107.80 115.77 154.51 14.29 14.29 99.79 135.84 229.76 57.70 71.60 112.87 138.75 184.56 Page 74 74 74 74 74 74 74 74 74 74 74 74 73 73 73 73 73 73 73 73 73 75 75 75 75 75 75 74 74 74 74 74 74 75 75 73 73 73 73 73 73 73 73 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Cylinder Operating Data ® Product Number 8599E 8853DA 8853U 8853V 8853W 8853X 8853Z 8854A 8854B 8854C 8854D 8854G Description Plunger Assembly w/ leathers 449B 2 3/4” Bottom Cap Check Assembly 442 3” Bottom Cap Check Assembly 442 1 11/16” Bottom Cap Check Assembly 442 1 13/16” Bottom Cap Check Assembly 442 2” Bottom Cap Check Assembly 442 2 1/4” Bottom Cap Check Assembly 442 2 1/2” Check Poppet w/ facing 442 1 11/16” Check Poppet w/ facing 442 1 13/16” Check Poppet w/ facing 442 2” Check Poppet w/ facing 442 2 1/4” & 2 1/2” Check Poppet w/ facing 442 3” List Price 259.07 173.98 95.36 65.75 85.03 83.79 117.32 9.69 14.29 14.56 25.86 59.60 Page 73 74 74 74 74 74 74 74 74 74 74 74 Table showing amount of water discharged per stroke by single acting cylinder. The diameter of cylinder and length of stroke being known. Dia. of pump cylinder in inches 1 2 3 4 5 6 7 8 10 12 18 24 Area of circle cylinder sq in 1 3/8 1 1/2 1 5/8 1 3/4 1 13/16 1 7/8 1 31/32 2 2 3/16 2 1/4 2 1/2 2 3/4 3 .0064 .0076 .0090 .0104 .0112 .0120 .0132 .0136 .0163 .0172 .0212 .0257 .0306 .0128 .0153 .0180 .0208 .0224 .0240 .0263 .0272 .0325 .0344 .0425 .0514 .0612 .0192 .0229 .0270 .0312 .0336 .0360 .0395 .0408 .0488 .0516 .0637 .0771 .0918 .0256 .0306 .0360 .0416 .0448 .0480 .0527 .0544 .0650 .0688 .0850 .1028 .1224 .0320 .0382 .0450 .0512 .0560 .0600 .0659 .0680 .0812 .0860 .1062 .1285 .1530 .0384 .0459 .0540 .0625 .0672 .0720 .0790 .0816 .0976 .1033 .1275 .1543 .1836 .0448 .0535 .0630 .0729 .0784 .0840 .0922 .0952 .1137 .1205 .1487 .1800 .2142 .0512 .0612 .0720 .0833 .0896 .0960 .1054 .1088 .1300 .1377 .1700 .2057 .2448 .0640 .0765 .0900 .1041 .1120 .1200 .1317 .1360 .1625 .1721 .2125 .2571 .3060 .0768 .0918 .1080 .1249 .1344 .1440 .1580 .1632 .1952 .2071 .2550 .3085 .3672 .1152 .1375 .1620 .1872 .2016 .2160 .2371 .2448 .2928 .3104 .3825 .4628 .5508 .1536 .1832 .2140 .2497 .2688 .2280 .3161 .3264 .3904 .4137 .5100 .6171 .7344 1.4849 1.7671 2.0739 2.4053 2.5802 2.7612 3.0440 3.1416 3.7584 3.9760 4.9070 5.9395 7.0686 Length of stroke in inches with capacity per stroke in gallons To obtain the capacity of a pump with a diameter of cylinder given in the table, but with a longer stroke than 24 inches (the longest stroke given in teh table), add or multiply the capacity to represent the required length of stroke. For instance: The capacity of a cylinder with a 30 inche stroke would be the same as that (having the same diameter) of an 18 inch stroke cylinder, added to the capacity of a 12 inch stroke cylinder. The same result may be obtained by multiplying the capacity of a cylinder with a 10 instroke by 3. To obtain the amount of water discharged per minute, multiply the capacity per stoke by the number of strokes per minute. To obtain the amount of water discharged per hour, multiply this figure by 60. Capacities are given in American Gallons. To find English gallons, deduct 1/6; to find liters, multiply by 3.75. TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 4/2009 1.79 Rod Couplings 720 Series Rod Coupling Features: • Hexagon shaped, galvanized couplings. • Made from solid bars of cold-rolled steel. • Use to connect steel pump rods. 720 Rod Couplings 720 6/14/11 1.80 Part Number 8075B1 8075C1 8075D1 8075E1 8075F1 8075G1 8075J1 8075K1 8075L1 Size Size of Hexagon 3/8”x3/8” 5/8” 7/16”x3/8” 5/8” 7/16”x7/16” 5/8” 1/2”x3/8” 11/16” 1/2”x7/16” 11/16” 1/2”x1/2” 11/16” 5/8”x7/16” 13/16” 5/8” x 1/2” 13/16” 5/8”x5/8” 13/16” TM Overall Length 1-3/4” 1-3/4” 1-3/4” 1-3/4” 1-3/4” 1-3/4” 2-1/8” 2 1/8” 2-1/8” Ctn Qty 25 25 25 25 25 25 BULK BULK BULK List Price $ 1.81 1.81 1.83 3.23 3.39 2.28 4.71 8.83 4.65 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Jet-Lube® Add extra years to the life of any drill rig with the products used for years. Use Jet-Lube specialty lubricants, thread compounds and sealants on drill rods, pipe, collars, ISO 9001 stabs, subs, wire and cable for lower down-time and longer rig life. Water well drillers use Jet-Lube products on pumps, compressors and potable water connections. You name it, there's a Jet-Lube product for it. There's even environmental safe cleaners and degreasers. Jet-Lube products are tested tough every day. Every product is the result of more than 50 years of testing and research. Jet-Lube is the only thread compound manufactured with its own downhole simulation, testing and certification equipment. Products are tested on rigs all over the world. Whether drilling in soft rock or harder formations, Jet-Lube delivers ultimate protection. Where to apply Jet-Lube products: 1 4 On tool joints, drill rods and pipe, on threaded connections, flanges and exposed threads. For water wells and monitor wells. For swivels, crown bearings, travel blocks and open gears; for anti-friction bearings; for all lube points on rigs. On cables, ropes, sheave grooves; on cable spool guides and running gears; roller chain. For potable water line connections; lines for fuel and gases. 5 For truck machinery; floors, tanks and trucks. 6 Jobsite protection. 2 3 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 4/2009 1.89 Jet-Lube® Kopr-Kote® Heavy Duty Drill Pipe Compound (Lead Free) A high performance, lead free, copper based thread compound for heavy duty drilling. Protects against seizure, galling and downhole makeup. ARCTIC grade also available. Temp. rating -65°F to 300°F. JL100 Series 1 ISO 9001 Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty List Price JL10050 JL10023 JL10012 JL10015 JL10512 JL10515 14 oz. cartridge 1 gal pail 2 gal pail 5 gal pail ARCTIC GRADE 2 gal pail ARCTIC GRADE 5 gal pail 36 lbs. 11 lbs. 21 lbs. 52 lbs. 21 lbs. 52 lbs. 1 1 1 2 1 2 30 1 1 1 1 1 $ 35.89 164.04 309.57 614.89 340.50 676.36 Jet-Lube 21® Intermediate Grade Drill Pipe Compound (Lead Free) The lead free professional choice for intermediate drilling applications in softer formations. Environmentally safe. 1 JL109 Series Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty List Price JL10923 JL10912 JL10915 1 gal pail 2 gal pail 5 gal pail 10 lbs. 20 lbs. 49 lbs. 1 1 2 1 1 1 $ 106.18 206.57 423.61 Eco-Safe™ Nonmetallic Thread Compound Premium quality, nonmetallic thread compound containing carbon based fibers and additives and other extreme pressure and anti-wear additives. 1 JL145 Series Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty List Price JL14523 JL14512 JL14515 1 gal pail 2 gal pail 5 gal pail 12 lbs. 22 lbs. 48 lbs. 1 1 1 1 1 1 $ 152.79 308.39 504.07 Bullseye™ Water Well and Environmental Compound High purity thread compound designed for sensitive water well and other environmental drilling applications requiring a petroleum hydrocarbon-free product. 1 JL668 Series Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty List Price JL66823 JL66812 1 gal pail 2 gal pail 12 lbs. 20 lbs. 1 1 1 1 $ 250.68 476.75 Jet-Lube Dope Brushes Thread compound dope brushes, taper or bevel style. 1 1/8" x 16". Can be used in 1, 2 or 5 gallon pails. 1 Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty List Price JL03000 JL03500 1 1/8" x 16" Taper 1 1/8" x 16" Bevel 9 lbs. 9 lbs. 1 1 12 12 $ 35.29 33.79 JL03 Series 6/14/11 1.90 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Jet-Lube® JLS® Economy Grade Drill Pipe Compound (Lead Free) Economical choice for use only where drilling conditions are least demanding. For use in light to medium drilling in sandy formations. Environmentally safe. ISO 9001 1 JL119 Series Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty List Price JL11923 JL11912 JL11915 1 gal pail 2 gal pail 5 gal pail 10 lbs. 20 lbs. 50 lbs. 1 1 2 1 1 1 $ 84.79 157.07 330.18 Well-Guard® Monitor Well Drill Thread Compound 1 JL185 Series A thread compound which provides state-of-the-art protection against galling, seizure and thread damage while being in full compliance with all EPA guidelines. Petroleum hydrocarbon-free and brushable to -10°F. Test results available. Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty JL18572 JL18523 JL18515 1 pint plastic jar 1 gal pail 5 gal pail 14 lbs. 11 lbs. 54 lbs. 1 1 2 12 1 1 List Price $ 72.96 478.96 2002.29 Enviro-Guard™ Drop Pipe Lubricant and Sealant. Specially formulated to aid in the assembly/disassembly of downhole casing for water wells. 1 JL184 Series Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty List Price JL18423 JL18412 JL18415 1 gal pail 2 gal pail 5 gal pail 12 lbs. 24 lbs. 48 lbs. 1 1 1 1 1 1 $ 188.54 355.32 859.82 Run-N-Seal® Tubing and Casing Sealant An environmentally safe nonmetallic sealant for threaded tubing and casing. Passes California COR Title 22 1 Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty List Price JL17023 JL17012 JL17015 1 gal pail 2 gal pail 5 gal pail 11 lbs. 22 lbs. 54 lbs. 1 1 2 1 1 1 $ 114.21 204.32 447.46 JL170 Series RD-N™ Synthetic Rock Drilling Oil for Environmental Drilling Provides superior lubrication for all makes of pneumatic percussion tools and prevents premature wear of hammer bits. An ISO 100/SAE 30 oil which exceeds all current EPA guidelines. Certified test results available. Can be used as a wire rope lubricant or hydraulic oil on restricted sites where petroleum based products are banned. 1 JL180 Series TM Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty JL18033 JL18035 1 gal jug 5 gal jug 36 lbs. 42 lbs. 1 2 4 1 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 List Price $ 187.43 844.25 6/14/11 1.91 Jet-Lube® ALCO-EP™ EFC™ WW Extreme Service Multipurpose Grease. Premium multipurpose calcium sulfonate complex grease thickening a blend of synthetic oils selected to provide the level of biodegradation required to meet the most safe enviromental ratings. 2 JL369 Series Part Number Net Contents & Container Type JL36950 JL36916 14 oz. cartridge 35 lb. pail ISO 9001 Shipping Weight/Case Case Equivalents Case Qty List Price 36 lbs. 39 lbs. 1 1 30 1 $ 23.00 753.79 ALCO-EP™ Premium Grease with Moly-Aluminum Complex (Black) Water restant aluminum complex based grease contains graphite, molybdenum disulfide and premium EP additive package for maximum metal protection, water resistance and high temperature (450F) capability in an all-weather formulation. NLGI Grade 2 2 Part Number Net Contents & Container Type JL37050 14 oz. cartridge Shipping Weight/Case Case Equivalents Case Qty List Price 36 lbs. 1 30 $ 15.00 JL37050 769 Lubricant® and Penetrant Heavy duty penetrating lubricant for all environments. When drilling in marshland or near coastlines, protects operating parts against salt corrosion. Frees rusted and frozen parts, displaces moisture, cleans and prevents rust. Non-flammable. MIL-C-23411A. Federal spec V V-P-216B. USDA-H2 2 Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty List Price JL37341 12 oz. aerosol 12 lbs. 1 12 $ 18.96 JL37341 WLD™ Wire Rope, Cable and Roller Chain Dressing and Lubricant Extend the life of wirelines, ropes, cables, grooves. Specially formulated with molybdenum disulfide and graphite to reduce friction and wear on cable strands. Tacky and adhesive for lasting protection. Penetrates wire strands to lubricate the core, then keeps on working to prevent moisture from corroding the cable. Black 3 Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty List Price JL28541 12 oz. aerosol 12 lbs. 1 12 $ 21.75 JL28541 WRL™ Wire Rope and Chain Lubricant/Oil USDA authorized non-drying film penetrates to the rope core for long-term protection. May be applied by spraying, pouring or with automatic lube system. Pumpable to -25F. Amber Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty List Price JL34041 12 oz. aerosol 12 lbs. 1 12 $ 22.64 3 JL34041 6/14/11 1.92 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Jet-Lube® V-2® Multi Purpose PTFE Thread Sealant A soft setting, non-petroleum based thread sealant for use where immediate pressurization is desired. Non-staining, low odor, off white in color. Use on all types of metals, reinforced fiberglass and PVC. MIL-TT-S-1732. USDA H-2 Authorized. IAPMO Approved. 4 JL355 Series ISO 9001 Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty List Price JL35502 JL35504 1/2 pint brush top can 1 pint brush top can 11 lbs. 19 lbs. 1 1 12 12 $ 29.32 43.46 TFW™ Anti-Sieze Thread Sealant with PTFE Low friction and non-toxic, TFW is used to prevent thread leaks of almost all fluids, gases or steam, even at temperatures up to 500 F. Can be used on metal, PVC, ABS and CPVC fittings and piping. IAPMO approved. 4 JL240 Series Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty List Price JL24002 JL24004 1/2 pint brush top can 1 pint brush top can 9 lbs. 17 lbs. 1 1 12 12 $ 26.82 38.79 Pitless Adapter Lube™ Assembly Lubricant Preservative designed to aid in installation of pitless adapters. USDA H-1 authorized. Corrosion preventative contains anti-bacterial/anti-fungal additive. 4 Part Number Net Contents & Container Type JL71741 12 oz. aerosol Shipping Weight/Case Case Equivalents Case Qty List Price 13 lbs. 1 12 $ 22.68 JL71741 TF-15® Thread Sealant with PTFE for fiberglass pipe High pressure thread sealant containing PTFE and EP additives that allow for easy breakout without seizing, stripping or galling. Highly recommended for use as a sealant on fiberglass tubing and casing threads. Passes California COR Title 22 4 JL23023 Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty List Price JL23023 1 gal pail 11 lbs. 1 1 $ 157.14 Easy-Clean® Concentrated Rig Wash A biodegradable detergent to clean oil and grime from equipment or pumping station machinery. Industrial strength concentrated powdered detergent. Part Number Net Contents & Container Type JL30519 40 lb. 6 gal pail Shipping Weight/Case Case Equivalents Case Qty List Price 43 lbs. 2 1 $ 345.18 5 JL30519 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 1.93 Jet-Lube® Jet-Lube 5000™ Water Based Cleaner and Degreaser Emulsifies (lifts and suspends) dirt, carbon, grease, etc., for removal by rinsing or wiping. May be used on surfaces compatible with water. Use full strength or dilute with fresh or salt water. Environmentally safe and compliant with EPA 624 & 625. 5 JL710 Series ISO 9001 Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty List Price JL71043 JL71033 JL71035 16 oz. trigger spray 1 gal jug 5 gal jug 14 lbs. 35 lbs. 45 lbs. 1 1 2 12 4 1 $ 18.75 73.68 299.89 Clean-Up Plus™ Organic Solvent Cleaner Environmentally safe cleaner and degreaser. Blend of organic solvents, safe non-flammable CO2 propellant. Citrus scent. Residue free product is safe on all metals. 29KV dielectric strength. No Tri 1-1-1. USDA authorized. 5 Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty List Price JL72542 15 oz. aerosol 16 lbs. 1 12 $ 21.82 JL72542 Clean-Up™ Industrial Cleaner and Safety Solvent Heavy duty low foaming cleaner/degreaser. Fast working, non-flammable residue free product formulated with an ozone friendly chlorinated solvent. 29 KV dielectric strength. No Tri 1-1-1. 5 Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty List Price JL61542 18 oz. aerosol 15 lbs. 1 12 $ 21.93 JL61542 Moly Mist™ Dry Film Lubricant Use to break in equipment and assemble moving parts. Micro-fine molybdenum disulfide suspended in a quick-drying carrier. Bonds to any surface in seconds to provide low coefficient of friction, extended lubrication and improved operation. 5 Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty JL16041 12 oz. aerosol 13 1 12 List Price $ 28.29 JL16041 TOP-GUN™ Wasp and Hornet Killer EPA registered formula kills wasps, hornets, yellow jackets and bees on contact from 15-20 feet. Instant knockdown. Non conductive - 35KV formula for total protection. 6 Part Number Net Contents & Container Type Shipping Weight/Case Case Equivalents Case Qty List Price JL51541 14 oz. aerosol 15 1 12 $ 20.96 JL51541 6/14/11 1.94 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Check Valves - Brass, Bronze CHECK VALVE Features: • Cast Brass, bronze, lead free brass or stainless steel body & poppet. • Buna-N o-ring (Viton on stainless steel). • Stainless steel springs, washers, locknuts. • Delrin poppet stem guide. • 200 psi WOG working presure. • 300 lb. max hang weight (down pull) tension. • Individually cartoned. • Imported. CV-BS Series BRASS Check Valves • Rough body finish. Part Number Size Ctn Qty List Price CV50BS CV75BS CV100BS CV125BS CV150BS CV200BS 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 100 80 60 40 30 20 $ 10.07 13.71 20.00 33.27 37.38 66.72 Ctn Qty List Price CV-BS Series CVXLD Series BRASS Check Valves • Rough body finish. • Extra long at discharge end. CVXLD Series Part Number Size CVXLD100BS CVXLD125BS 1” x 1" 1 1/4" x 1 1/4" 60 40 $ 38.75 45.54 CV-B Series BRONZE Check Valves • Machined body finish. CV-B Series Part Number Size Ctn Qty List Price CV50B CV75B CV100B CV125B CV150B CV200B CV300B CV400B 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 3” 4" 100 80 60 40 30 20 6 3 $ 13.25 19.36 27.32 38.39 51.96 89.11 308.04 653.04 CVNL-BS Series LEAD FREE BRASS Check Valves • Rough body finish. CVNL-BS Series Part Number Size Ctn Qty List Price CVNL50BS CVNL75BS CVNL100BS CVNL125BS CVNL150BS CVNL200BS CVNL300BS CVNL400BS 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 3” 4” 100 80 60 40 30 20 6 3 $ 11.96 17.75 26.17 41.31 47.63 77.48 273.21 668.98 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 2.1 Check Valves - Brass, Bronze, Stainless Steel IMPORTED CHECK VALVE Features: • Cast Brass, bronze, lead free brass or stainless steel body & poppet. • Buna-N o-ring (Viton on stainless steel). • Stainless steel springs, washers, locknuts. • Delrin poppet stem guide. • 200 psi WOG working presure. • 300 lb. maximum hang weight (down pull) tension. • Individually cartoned. • Imported. SSCV Series STAINLESS STEEL Check Valves • 304 cast stainless steel casting, springs, washers, lock nut. • Viton o-ring Part Number SSCV Series SSCV50 SSCV75 SSCV100 SSCV125 SSCV150 SSCV200 SSCV300 SSCV400 SSCV1025 Size Ctn Qty List Price 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 3” 4” 1” fpt x 1 1/4” mpt 100 80 60 40 30 20 6 3 60 $ 24.65 33.55 44.23 59.14 77.53 128.71 545.16 1048.57 62.50 CVMR-BS Series BRASS Submersible Check Valves • Rough body finish. • FPT x MPT Part Number Size (FPT X MPT) CVMR100BS 1” x 1" Ctn Qty 60 List Price $ 30.89 CVMR-BS Series CVMXL Series BRASS Submersible Check Valves • Rough body finish. • Extra long body. Part Number Size (M X F) CVMXL100BS CVMXL125BS 1” x 1" 11/4" x 1 1/4" Ctn Qty 60 40 List Price $ 26.61 34.82 CVMXL Series CVM-B Series BRONZE Submersible Check Valves • Machined body finish. • FPT x MPT CVM-B Series 6/14/11 2.2 Part Number Size (FPT X MPT) Ctn Qty CVM100B CVM125B CVM1252B 1” x 1" 1" x 1 1/4" 1 1/4" x 1 1/4" 60 60 40 TM List Price $ 35.89 34.29 51.25 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Check Valves - Brass, Bronze CHECK VALVE Features: • Cast Brass, bronze, lead free brass or stainless steel body & poppet. • Buna-N o-ring (Viton on stainless steel). • Stainless steel springs, washers, locknuts. • Delrin poppet stem guide. • 200 psi WOG working presure. • 300 lb. maximum hang weight (down pull) tension. • Individually cartoned. • Imported CVMNL-BS Series LEAD FREE BRASS Submersible Check Valves • Rough body finish. • FPT x MPT Part Number Size (FPT X MPT) CVMNL1252BS 1 1/4" x 1 1/4" Ctn Qty 40 List Price $ 51.61 CVMNL-BS Series CVT-1B Series BRONZE Single Tap Check Valves • Machined body finish. • 1/8" inlet tap. Part Number Size CVT1001B CVT1251B 1" 1 1/4" Ctn Qty 60 40 List Price $ 35.64 39.91 CVT-1B Series CVRT-2BS Series BRASS Double Tap Check Valves • Rough body finish. • One 1/8" inlet tap. • One 1/4" outlet tap. Part Number Size CVRT1002BS CVRT1252BS 1" 1 1/4" Ctn Qty 60 40 List Price $ 31.25 43.96 CVRT-2BS Series TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 2.3 Check Valves - Brass, Bronze CHECK VALVE Features: • Cast Brass, bronze, lead free brass or stainless steel body & poppet. • Buna-N o-ring (Viton on stainless steel). • Stainless steel springs, washers, locknuts. • Delrin poppet stem guide. • 200 psi WOG working presure. • 300 lb. maximum hang weight (down pull) tension. • Individually cartoned. • Imported. CVT-2B Series BRONZE Double Tap Check Valves • Machined body finish. • One 1/8" inlet tap. • One 1/4" outlet tap. CVT-2B Series Part Number Size CVT1002B CVT1252B CVT1502B CVT2002B 1" 1 1/4" 1 1/2" 2" Ctn Qty 60 40 30 20 List Price $ 33.57 45.00 56.96 112.50 CVT-3B Series BRONZE Control Center Check Valves • Machined body finish. • One 1/8" inlet tap. • One 1/8" and one 1/4" outlet taps. Part Number Size CVT1003B CVT1253B 1" 1 1/4" Ctn Qty List Price 60 40 32.68 38.04 CVT-3B Series CVC-B Series BRONZE Control Center Check Valves • Machined body finish. • One 1/8" inlet tap. • One 1/8" and two 1/4" outlet taps. Part Number Size CVC100B CVC125B 1" 1 1/4" Ctn Qty 60 40 List Price 34.46 40.38 CVC-B Series 6/14/11 2.4 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Foot Valves - Brass, Bronze FOOT VALVE Features: • Cast Brass, bronze, lead free brass or stainless steel body & poppet. • Buna-N o-ring (Viton on stainless steel). • Stainless steel springs, washers, locknuts and strainers. • 200 psi WOG working presure. • Individually cartoned. • Imported. FVR-BS Series BRASS Foot Valves • Rough body finish. Part Number Size FVR50BS FVR75BS FVR100BS FVR125BS FVR150BS FVR200BS 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" Enters Pipe Ctn Qty 1 1/4" 1 1/2" 2" 2 1/2" 3" 3 1/2" 100 80 60 40 30 20 List Price $ 10.60 14.11 19.92 26.22 31.25 52.68 Enters Pipe Ctn Qty List Price 1 1/4" 1 1/2" 2" 2 1/2" 2" 3" 3 1/2" 5" - 100 80 60 40 50 30 20 8 4 FVR-BS Series FV-B Series BRONZE Foot Valves • Machined body finish. FV-B Series Part Number Size FV50B FV75B FV100B FV125B FV1251B FV150B FV200B FV300B FV400B 1/2" 3/4" 1" 1 1/4" 1 1/4" 1 1/2" 2" 3" 4" $ 13.25 15.38 23.39 30.89 31.84 40.89 69.82 261.61 455.36 FV-B Series BRONZE Dual Purpose Foot Valves • Machined body finish. Part Number Size FV100125B 1" FPT x 1 1/4"MPT Enters Pipe Ctn Qty List Price 2" 60 $ 28.21 FV-BS Series TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 2.5 Foot Valves - Brass, Bronze, Stainless Steel FOOT VALVE Features: • Cast Brass, bronze, lead free brass or stainless steel body & poppet. • Buna-N o-ring (Viton on stainless steel). • Stainless steel springs, washers, locknuts and strainers. • 200 psi WOG working presure. • Individually cartoned. • Imported. FVNL Series LEAD FREE BRASS Foot Valves • Rough body finish. Part Number Size FVNL50BS FVNL75BS FVNL100BS FVNL125BS FVNL150BS FVNL200BS FVNL300BS FVNL400BS 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 3” 4” Enters Pipe Ctn Qty 1 1/4" 1 1/2" 2" 2 1/2" 3" 3 1/2" 5” - 100 80 60 40 30 20 8 4 List Price $ 10.47 16.96 24.61 33.13 39.21 72.14 232.50 427.86 FVNL-BS Series SSFV Series STAINLESS STEEL Foot Valve Features: • 304 Stainless steel casting, spring, washer, locknut, strainer • Viton o-ring SSFV Series Part Number Size SSFV50 SSFV75 SSFV100 SSFV125 SSFV150 SSFV200 SSFV300 SSFV400 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 3” 4” Enters Pipe Ctn Qty List Price 1 1/4" 1 1/2" 2" 2 1/2" 3" 3 1/2" 5" - 100 80 60 40 30 20 8 4 $ 16.79 21.71 41.79 55.34 58.07 124.89 464.41 735.21 FVSC, CVSP Series Stainless Screen, Endcap, Screw, Spring • Spring replacement for all imported check and foot valves FVSC & CVSP Series 2/15/11 2.6 Screen/Cap/Screw Part Number Spring Part Number FVSC50 FVSC75 FVSC100 FVSC125 FVSC150 FVSC200 FVSC300 FVSC400 CVSP50 CVSP75 CVSP100 CVSP125 CVSP150 CVSP200 CVSP300 CVSP400 TM Size FVSC List Price 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 3” 4” $ 6.36 6.71 7.36 8.86 9.11 9.50 43.75 62.50 CVSP List Price $ 2.68 2.68 2.68 3.36 3.36 3.75 4.43 4.79 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Yard Hydrants - Frost Proof ® 5451 Series Frost Proof Yard Hydrant Features: • Fully frost proof, shut-off valve below frost line. • Heavy cast iron head with 3/4” brass discharge connection NEW, Improved and bucket hook. flow rates* • Heavy, galvanized steel, corrosion resistant, 1” stand-pipe. 45 gpm @ 50 psi • Galvanized carbon steel connecting rod. Brass operating rod. • Long lasting Buna-N rubber plunger with solid brass core. • Integral valve seat cast into BRONZE valve body. 3/4” FPT connection with double bypass bottom valve for superior flow, less risk of debris blockage. • 1/8” FPT drain hole. • Rated to 80 PSI, adjustable. See page 2.18 for adjustment procedure. • Packed securely in individual heavy weight carton. • Independent lab tested. • CE certified. Part Number 54511 54512 54513 54514 54515 54516 54518 5451 Series Bury Depth Overall Length Weight (Pounds) List Price 1 2 3 4 5 6 8 42” 54” 66” 78” 90” 102” 126” 12.4 15.2 17.8 21.0 22.3 26.2 30.7 $ 117.59 123.98 134.62 143.67 154.31 162.82 184.10 Item Handle Clevis Rod Head Hose Adpt 3/4" Bottom valve Stand Pipe Material Cast iron 360 brass Cast Iron 360 brass Bronze 81-3-7-9 Steel - galvanized 1” Materials of Construction # 1 2 3 4 5 6 7 8 Item Plunger Fulcrum Bolt Fulcrum Nut Links Set Screw Packing Nut Packing Connector Part Number Size Vacuum Breaker HVB75 # 9 10 11 13 14 Material Buna-N/360 brass Steel - Zinc plated Steel - Zinc plated Steel - Zinc plated Steel - Zinc plated 360 brass Teflon filled graphite Brass # Barbs Ctn/Case Qty List Price 20/200 $ 7.54 10/100 10/100 10/100 5/50 11.80 16.39 16.75 30.86 8 10 10/100 10/100 21.61 18.75 4 6 4 10/100 10/100 10/100 16.00 21.25 21.61 3/4” Meets ASSE 1011 specifications Cast Bronze Hydrant Elbow (INSxMIP) HVB75 RBHE3/4 RBHE1X3/4 RBHE1 RBHE11/4 3/4”x 3/4” 1” x 3/4” 1” x 1” 1 1/4” x 1 1/4” 5 5 5 5 Cast Bronze Extra Long Hydrant Elbow (INS x MIP) RBHE XLRBHE1 XLRBHE1X3/4 1”x 1” 1” x 3/4” Cast Bronze Hydrant Tee (INS x MIP) RBHT3/4 RBHT1x3/4 RBHT1 RBHT TM 3/4” x 3/4” 1” x 3/4” 1” x 1” www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 2.17 Yard Hydrants - Replacement Parts ® 5451 Series Hydrant Replacement Parts Part Number 3/4” 5451 Hydrant Flow Rates YRK1 9175B 9023B 9023C 9023D 9023E 9023A 29609G 9023G 2506K 2222AHNS 2500K 382914 381504 2575K Item Number 1 2 3 4 5 6 7 8 9 10 11 13 14 Description List Price Repair Kit (Items 1-8) $ 17.33 Plunger - rubber 6.37 Fulcrum Bolt - steel 0.36 Nut - steel 0.27 Links (set of 2) - steel 2.38 Set Screw square head - steel 0.47 Packing Nut - brass 2.78 Packing - graphite (2 - 1 old, 1 new style) 3.56 Connector - brass 5.31 Handle - painted cast iron 10.14 Clevis Rod - brass NEW STYLE (double bypass) 11.77 Head only - painted cast iron 34.19 Hose Adapter - brass 7.31 Valve Body - bronze 45.00 Complete Head Assembly (Items 2-13) 53.59 PSI 10 15 20 25 30 35 40 45 50 20 GPM @ 10 PSI STEEL ROD (use with double bypass valve 5451 Series) 25.7 GPM @ 15 PSI TA7100099NS TA7100100NS TA7100101NS TA7100102NS TA7100103NS TA7100104NS TA7100105NS 29.3 GPM @ 20 PSI 32.5 GPM @ 25 PSI 35 GPM @ 30 PSI 37.5 GPM @ 35 PSI 40 GPM @ 40 PSI 42.5 GPM @ 45 PSI 54511 Rod (32 5/8” old or 32.4” new) 54512 Rod (44 5/8” old or 44.4” new) 54513 Rod (56 5/8” old or 56.4” new) 54514 Rod (68 5/8” old or 68.4” new) 54515 Rod (80 5/8” old or 80.4” new) 54516 Rod (92 5/8” old or 92.4” new) 54518 Rod (116 5/8” old or 116.4” new) 7.49 10.62 13.67 16.51 19.39 22.28 24.45 45 GPM @ 50 PSI GPM 15 20 25 30 35 40 45 NOTE: All 5451 Series Hydrants are preset at factory. There should be no need for any adjustment on initial installation. Adjust only if water does not shut off or hydrant does not operate properly. 5451 HYDRANT ADJUSTMENT PROCEDURE 1. Turn water supply OFF. 2. Open hydrant to relieve pressure. 3. Loosen set screw. (Item 1) 4. Push brass rod down as far as it will go by hand to be sure the plunger is touching the seat. 5. Open handle (Item 2) approximately 30° from closed position. 6. Tighten set screw snugly. 7. Turn water supply ON. 8. Operate hydrant and make sure the hydrant is shutting off properly and flowing properly. 9. If hydrant still does not shut off, repeat steps 1 through 8. 10. Flow water through hydrant and then close completely to check for proper drainage by: a) listening for water draining down pipe or b) putting your hand over the hose connection to feel for a vacuum. If hydrant does not drain, see step 11. 11. To clear drain hole blockage, close off hydrant spout by using hose cap or by attaching and kinking a hose. Open and close hydrant to allow water pressure to clear blockage. Repeat step 10 to verify proper drainage. If hydrant still does not drain, repeat steps 1 through 10 to fully uncover drain hole. CAUTION: Do not try to make the shutoff adjustment in one attempt or you may overadjust and cause damage to the plunger and 4/2009 2.18 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Deluxe Frost Proof Yard Hydrant Features: • FROST-PROOF - Shut-off valve operates below the frost line. • Pistol type handle eliminates pinching. • Can be padlocked. • Wheel handle controls water flow at rate desired. • Solid brass rod will not rust or cut into packing. • Water in standpipe drains out when hydrant is off. • Brass nozzle threaded for standard 3/4” hose coupling. • Inner parts removable without digging. • 80 PSI maximum pressure. • Individually boxed. CONTAINS LEAD - Not for sale in California. Call for lead free hydrant quote. Part Number Bury Depth Pipe Length Overall Length H800 H801 H802 H803 H804 H805 H806 H807 H808 1 ft 1 1/2 ft 2 ft 3 ft 4 ft 5 ft 6 ft 7 ft 8 ft 33” 41” 47” 59” 71” 83” 95” 107” 119” 39 1/2” 47 1/2” 53 1/2” 65 1/2” 77 1/2” 89 1/2” 101 1/2” 113 1/2” 125 1/2” Part Number Size Vacuum Breaker HVB75 HVB75 # Barbs Ctn Qty 1 1 1 1 1 1 1 1 1 List Price $ 146.02 150.10 154.49 163.16 174.85 186.58 201.33 213.01 228.21 Ctn/Case Qty List Price 20/200 $ 7.54 10/100 10/100 10/100 5/50 11.80 16.39 16.75 30.86 8 10 10/100 10/100 21.61 18.75 4 6 4 10/100 10/100 10/100 16.00 21.25 21.61 3/4” Meets ASSE 1011 specifications Cast Bronze Hydrant Elbow (INSxMIP) RBHE3/4 RBHE1X3/4 RBHE1 RBHE11/4 3/4”x 3/4” 1” x 3/4” 1” x 1” 1 1/4” x 1 1/4” 5 5 5 5 Cast Bronze Extra Long Hydrant Elbow (INS x MIP) RBHE XLRBHE1 XLRBHE1X3/4 1”x 1” 1” x 3/4” Cast Bronze Hydrant Tee (INS x MIP) RBHT TM RBHT3/4 RBHT1x3/4 RBHT1 3/4” x 3/4” 1” x 3/4” 1” x 1” www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 2.19 Yard Hydrants - Replacement Parts Replacement Parts For H800 Series Hydrants Part Reference Number Number Name of Part 8820 8821 8822 8823 8824 8825 * 8826 * 8827 * 8828 8829 8839 * 8814-0 8814-1 8814-2 8814-3 8814-4 8814-5 8814-6 8814-7 8814-8 8815-0 8815-1 8815-2 8815-3 8815-4 8815-5 8833 * 8834 8301 * 8836 * 8837 * 8610 840 850 2/15/11 2.20 TM A B C D E F G H I J K L M N P Q R S T List Price Head $ 52.74 Handle 17.14 Valve Body 60.34 Brass Extension 11.66 Hand Wheel 2.98 Connector - brass 28.95 Links(pair) - brass 15.35 Packing Nut - brass 10.17 Brass Hose Adapter 10.94 Hydrant Stem 4.16 O-Ring Packing 2.87 7/16” Pump Rod for H800 25.07 7/16” Pump Rod for H801 31.45 7/16” Pump Rod for H802 37.50 7/16” Pump Rod for H803 47.89 7/16” Pump Rod for H804 58.02 7/16” Pump Rod for H805 68.20 7/16” Pump Rod for H806 78.21 7/16” Pump Rod for H807 88.39 7/16” Pump Rod for H808 98.41 Pipe Casing for H800 28.77 Pipe Casing for H801 37.93 Pipe Casing for H802 45.16 Pipe Casing for H803 57.21 Pipe Casing for H804 69.22 Pipe Casing for H805 81.22 Plunger - Buna-N 12.44 Rod Coupling 4.70 Lock Nut - stainless steel 0.91 Fulcrum Bolt - stainelss steel 3.72 Set Screw - stainless steel 1.81 Screw for Wheel 1.47 Head, Complete 85.86 *Included in Parts Kit 41.77 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Ball Valves - Brass Forged Brass Full Port Ball Valve Features: • • • • • • • • HFBV6 Series Heavy pattern forged brass construction. Full port allows maximum flow & minimum pressure drop or turbulence. Teflon® seats, chrome plated brass ball. Teflon® stem packing with adjustable gland follower. Blow out proof stem design. 600 PSI W.O.G. non-shock; 150 PSI S.W.P. (400 PSI 21/2”, 3” 4”) CSA Certified, UL Listed. Imported, Manufactured for American Granby in an ISO 9001 facility. DIMENSIONS (IN.) SIZE 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” ISO 9001 MATERIAL SPECIFICATIONS Handle nut Handle Gland Follower Stem Packing Ball Seats Body End Adapter Zinc Coated Steel Zinc Coated Steel Forged Brass Teflon® Chrome Plated Brass Teflon® Forged Brass Forged Brass Teflon® is a Dupont registered trademark Part Number Threaded Size HFBV6-25T HFBV6-38T HFBV6-50T HFBV6-75T HFBV6-100T HFBV6-125T HFBV6-150T HFBV6-200T HFBV6-250T HFBV6-300T HFBV6-400T 1/4” 3/8” 1/2” 3/4” 1” 1- 1/4” 1-1/2” 2” 2-1/2” 3” 4” A (S/T) B (S/T) C D (S/T) 1.79/1.76 1.91/1.76 2.05/2.05 2.75/2.36 3.23/2.76 3.82/3.31 4.43/3.66 5.32/4.18 6.28/5.36 7.15/6.04 9.28/7.39 1.73/1.73 1.73/1.73 1.84/1.92 2.00/2.09 2.44/2.56 2.85/2.95 3.17/3.35 3.45/3.68 4.76/4.76 5.08/5.08 5.87/5.87 3.54 3.54 3.54 3.78 4.53 4.53 5.51 5.51 8.66 8.66 9.61 .32/.39 .39/.39 .58/.58 .75/.75 .95/.95 1.26/1.26 1.58/1.58 1.94/1.94 2.52/2.52 2.95/2.95 3.90/3.90 Ctn/Case Qty List Price Threaded 50/100 50/100 50/100 30/60 20/40 12/24 9/18 6/12 2/4 2/4 2 $ 8.46 8.25 11.49 17.18 27.18 41.23 63.83 92.56 214.45 279.27 526.62 Part Number List Price Sweat Sweat HFBV6-50S HFBV6-75S HFBV6-100S HFBV6-125S HFBF6-150S HFBV6-200S $ 10.16 16.12 25.48 42.29 60.64 82.19 Forged Brass Full Port Drainable Ball Valve Features: • Heavy pattern forged brass construction. • Full port allows maximum flow & minimum pressure drop or turbulence. • Drain feature allows water line to be drained to prevent freeze-up. • Teflon® seats, chrome plated brass ball. • Teflon® stem packing with adjustable gland follower. • Blow out proof stem design. • 600 PSI W.O.G. non-shock. • Imported, Manufactured for American Granby in an ISO 9001 facility. HDBV Series ISO 9001 MATERIAL SPECIFICATIONS and DIMENSIONS Same as HFBV6 Series above TM Part Number Threaded Size Ctn/Case Qty List Price Threaded HDBV75T HDBV100T 1/2” 3/4” 1” 10/100 5/60 6/36 22.55 31.43 Part Number List Price Sweat Sweat HDB50S HDBV75S HDBV100S www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 $ 15.57 22.55 33.20 5/3/11 3.1 Ball Valves - Brass Forged Brass FULL Port Ball Valve with Hose Barbs Features: HFBV6-I Series ISO 9001 • Heavy pattern forged brass constuction. • Full port allows maximum flow and minimum pressure drop or turbulence. • Teflon® seats, chrome plated brass ball. • Teflon® stem packing with adjustable gland follower. • Blow-out proof stem design. • 600 psi W.O.G. non-shock; 150 psi S.W.P. • Insert hose barb ends for use with polyethylene pipe connections. • Imported. Manufacturered for American Granby in an ISO 9001 facility. MATERIAL SPECIFICATIONS Handle nut Handle Gland Follower Stem Packing Ball Seats Body End Adapter Zinc Coated Steel Zinc Coated Steel Forged Brass Teflon® Chrome Plated Brass Teflon® Forged Brass Forged Brass Part Number HFBV6-50I HFBV6-75I HFBV6-100I HFBV6-125I Size Ctn/Case Qty List Price 1/2” 3/4” 1” 1-1/4” 50/100 30/60 20/40 12/24 $ 15.61 24.11 29.82 54.47 Teflon® is a Dupont registered trademark Forged Brass Conventional Port Ball Valve Features: • Regular pattern forged brass constuction. • Conventional port with excellant flow characteristics compared with other valves in its class. • Teflon® seats, chrome plated brass ball. • Double o-ring stem seal. • Blow-out proof stem design. • 400 PSI W.O.G non-shock, 125 PSI S.W.P. • Imported. Manufactured for American Granby in an ISO 9001 facility. IBV Series DIMENSIONS (IN.) ISO 9001 MATERIAL SPECIFICATIONS Handle Nut Handle Stem O-Rings Stem Ball Seats Body End Adapter Zinc Coated Steel Zinc Coated Steel NBR Forged Brass Chrome Plated Brass Teflon® Forged Brass Forged Brass Teflon® is a Dupont registered trademark Threaded Part Number Sweat Part Number IBV50T IBV75T IBV100T IBV125T IBV150T IBV200T IBV50S IBV75S IBV100S IBV125S IBV150S IBV200S 5/23/11 TM 3.2 SIZE 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” A (TxT) A (SxS) B C D 1.83 2.09 2.40 2.76 3.27 3.82 1.97 2.44 2.95 3.35 4.00 4.82 1.54 2.09 2.20 2.36 2.64 3.15 .39 .59 .79 .98 1.26 1.57 3.19 3.64 3.64 3.64 4.41 5.63 Size Ctn/Case Qty List Price 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” 16/128 10/100 12/48 8/32 6/24 4/16 $ 8.64 14.60 23.61 36.39 53.71 81.79 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Ball Valves - Gas, Stainless Forged Brass Gas Ball Valve Features: • Heavy duty two piece forged brass body. • For use with natural, manufactured, mixed, liquified petroleum and LP gas/air mixtures. • Meets ANSI standard Z21.15 for use as a gas appliance connector valve (1/2 lb. system). CSA, US/AGA B-16.44 • UL Listed 757X for fire protection. • Pressure rated at 175 psi W.O.G. non-shock. • Imported, Mfg for American Granby in an ISO 9001 facility. HGBVT Series HGBVL Series ISO 9001 DIMENSIONS (IN.) SIZE A 1/2” 3/4” 1” MATERIAL SPECIFICATIONS Handle Screw Handle Stem O-Rings Stem Ball Seats Body End Adapter Steel Aluminum NBR Forged Brass Chrome Plated Brass Teflon® Forged Brass Forged Brass 2.21 2.38 2.91 B C BTU Capacity/Hr. 1.46 1.75 1.89 1.81 1.81 1.81 295,000 795,000 1,200,000 Lever Style Part Number Tee Style Part Number Size txt Ctn/Case Qty HGBVL50T HGBVL75T HGBVL100T HGBVT50T HGBVT75T HGBVT100T 1/2” 3/4” 1” 12/144 12/96 6/96 List Price $ 10.99 16.59 30.46 Stainless Steel Full Port Ball Valve Features: • • • • • • • • 316 Stainless steel ball valves Full Port, 1000 psi WOG Locking Handle (padlock not included) Investment castings. PTFE seal and packing. Blow-out proof stem. Mounting pad tapping. FPT x FPT DIMENSIONS (IN.) MATERIAL SPECIFICATIONS Body Cap Ball Seats Stem Handle Packing Seal Gasket Nut Handle Cover Thrust Washer Stainless Steel Stainless Steel Stainless Steel PTFE Stainless Steel Stainless Steel PTFE PTFE Stainless Steel Plastic Stainless Steel TM SIZE 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” SSBV Series D L H W 0.394 0.472 0.591 0.787 0.984 1.260 1.496 1.969 2.559 3.150 2.126 2.126 2.441 2.913 3.268 3.858 4.173 4.724 6.299 7.402 1.732 1.732 2.087 2.283 2.480 2.835 3.307 3.701 4.803 5.197 3.701 3.701 4.134 4.528 4.843 5.354 6.614 6.772 9.134 9.370 Part Number Description Size T x T SSBV25TLH SSBV38TLH SSBV50TLH SSBV75TLH SSBV100TLH SSBV125TLH SSBV150TLH SSBV200TLH SSBV250TLH SSBV300TLH Stainless 1000# Stainless 1000# Stainless 1000# Stainless 1000# Stainless 1000# Stainless 1000# Stainless 1000# Stainless 1000# Stainless 1000# Stainless 1000# 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” Case Qty 2/80 2/80 2/80 2/60 2/40 2/30 2/16 2/10 2/4 2/4 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 List Price $ 28.98 26.39 29.36 40.33 59.14 90.40 133.89 199.85 372.17 604.77 6/14/11 3.3 Valves - Bronze Float Bronze Float Valve Features: • • • • • • Cast bronze body Buna-N Disc Heavy Duty Tapped for 1/4-20SAE rod Threaded outlet Rated at 125 psi Part Number Size Inlet Outlet Tapped Ctn Qty List Price BFV1/2 BFV3/4 BFV1 1/2” 3/4” 1” 1/2” mpt 3/4” mpt 1” mpt 1/2” mpt 3/4” mpt 1” mpt 1/4”-20SAE 1/4”-20SAE 1/4”-20SAE 10/100 10/80 10/40 $ 29.70 35.83 47.34 BFV Series Brass Rods Features: • Brass SAE • Male thread both ends BFVR Series Part Number Length BFVR8 BFVR10 BFVR12 8” 10” 12” Thread 1/4”-20SAE 1/4”-20SAE 1/4”-20SAE Fits Valve Size Ctn Qty List Price 1/2” - 1” 1/2” - 1” 1/2” - 1” 50/400 50/300 50/300 $ 6.62 7.67 8.59 List Price Plastic Float Features: • • • • • BFVFP Series PVC Corrosion resistant Lightweight Up to 175°F For open tank service only Part Number Float Diam. Buoyancy Female Connection Ctn Qty 5” 6” 8” 2.17 lbs. 3.8 lbs. 9.87 lbs. 1/4”-20SAE 1/4”-20SAE 1/4”-20SAE 100 100 20 BFVFP5 BFVFP6 BFVFP8 6/14/11 TM 3.4 $ 21.23 25.00 31.08 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Valves - Brass Gate GV200 Series Forged Brass Gate Valve Features: • Constructed of heavy duty forged brass. • Die-cast body, forged bonnet are connected with a teflon body to bonnet gasket for a leak proof seat. • Screwed bonnet, non-rising stem, solid wedge disc and integral seats. • Teflon® stem seal packing. Teflon® is a registered trademark of Dupont. • Cast iron hand wheel • Rated at 200 PSI WOG; 125 PSI SWP (working pressure, non shock) • Threaded ends produced to ANSI/ASME B1.20.1 (NPT) standards. • Sweat ends produced to ANSI B16.18-1984 standards • Imported GV200 Series DIMENSIONS (IN.) MATERIAL SPECIFICATIONS Wheel Nut Hand Wheel Gland Follower Nut Gland Follower Stem Seal Packing Bonnet Body-Bonnet Gasket Lock Nut Stem Disc Body SIZE 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” Brass Cast Iron Brass Brass Teflon Brass Teflon Brass Brass Brass Brass Threaded Part Number Sweat Part Number GV200-50T GV200-50S GV200-75T GV200-75S GV200-100T GV200-100S GV200-125T GV200-125S GV200-150T GV200-150S GV200-200T GV200-200S GV200-250T GV200-300T GV200-400T TM A (IPS) A (CxC) 1.68 1.76 2.03 2.30 2.46 2.69 3.43 3.71 4.45 1.76 2.34 2.69 3.01 3.36 3.98 B (IPS) B (CxC) 2.77 2.97 3.44 4.02 4.45 5.23 6.36 7.41 9.17 2.79 3.10 3.63 4.37 4.96 6.13 C 2.15 2.15 2.34 2.93 2.93 3.12 3.90 4.29 5.07 Size Ctn/Case Qty List Price 1/2” 1/2” 3/4” 3/4” 1” 1” 1 1/4” 1 1/4” 1 1/2” 1 1/2” 2” 2” 2 1/2” 3” 4” 10 / 100 10 / 100 10 / 100 10 / 100 5 / 50 5 / 50 5 / 50 5 / 50 2 / 30 2 / 30 2 / 20 2 / 20 1 / 10 1 / 10 1/4 $ 12.01 13.21 14.91 14.83 21.64 20.32 31.40 42.87 37.50 45.57 62.31 75.36 138.58 176.96 319.02 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 5/3/11 3.5 Valves - Brass Swing Check Brass Swing Check Valve Features: • Constructed of heavy duty cast brass. • Screwed cap, swing type disc and integral seat. • Prevents backflow while offering full flow performance with a minimum of turbulence or pressure loss. • Rated 200 PSI W.O.G. (working pressure non-shock) • Imported. • Manufactured for American Granby in an ISO 9001 factory. HSCV Series ISO 9001 DIMENSIONS (IN.) MATERIAL SPECIFICATIONS Cap Body Disc Hinge Pin Screw SIZE 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” Brass Brass Brass Brass Brass Threaded Part Number Sweat Part Number HSCV50T HSCV50S HSCV75T HSCV75S HSCV100T HSCV100S HSCV125T HSCV125S HSCV150T HSCV150S HSCV200T HSCV200S HSCV250T HSCV300T HSCV400T 6/14/11 TM 3.6 A (IPS) A (CxC) B (IPS) B (CxC) 2.05 2.32 2.56 3.12 3.45 4.16 5.11 5.74 6.79 2.05 2.32 2.56 3.12 3.45 4.16 1.47 1.58 1.68 1.84 2.15 2.69 2.93 3.78 3.90 1.49 1.58 1.68 1.84 2.15 2.69 Size 1/2” 1/2” 3/4” 3/4” 1” 1” 1-1/4” 1-1/4” 1-1/2” 1-1/2” 2” 2” 2-1/2” 3” 4” Ctn/Case Qty 10/120 10/120 10/80 10/80 5/60 5/60 5/40 5/40 5/30 5/30 2/24 2/24 1/15 1/10 1/6 List Price $ 17.66 18.26 21.73 22.31 28.21 28.75 44.03 46.33 50.89 53.26 86.26 89.64 162.41 228.95 364.73 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Plumbing Valves - Low Pressure BOILER DRAINS • HOSE BIBBS • • • 125 PSI WOG (working pressure - non-shock), 200 PSI WOG (1/4 turn ball valves hose bibbs) All valves shown below are CSA rated except THBB/IHBB Series Imported Part Number Size Description Ctn/Case Qty List Price 1/2” 3/4” 1/2 3/4” mip x ght mip x ght w/ stuffing box mip x ght w/ stuffing boxmip x ght 12/144 12/144 12/144 12/144 $ 8.66 9.91 9.89 11.01 w/ stuffing box mip x ght w/ stuffing box mip x ght 12/144 12/144 12.16 12.46 Brass Boiler Drains HBD50 ☺ HBD75 HBD50SB ☺ HBD75SB HBD Series HBD-SB Series Brass Full Flow Boiler Drains IBD50SB ☺ IBD75SB 1/2” 3/4” NO LEAD Brass Full Flow Boiler Drains (CA AB1953 certified) IBD50SBNL ☺ IBD75SBNL IBD-SB Series IBD-SBNL Series 1/2” 3/4” w/ stuffing box mip x ght w/ stuffing box mip x ght 12/144 12/144 12.53 12.86 1/2” 3/4” mip x ght mip x ght 12/144 12/144 8.76 9.66 1/2” 3/4” mip x ght mip x ght 12/144 12/144 9.76 11.11 Brass No-Kink Boiler Drains HNKD Series HNKD50 ☺ HNKD75 Brass Hose Bibbs HHB50 ☺ HHB75 Brass Hose Bibbs - No Garden Hose Thread, Sampling Valve HHB Series HHBNHT Series HHB50NHT ☺ HHB75NHT 1/2” 3/4” mip x spout mip x spout 12/144 12/144 9.45 10.57 1/4 turn Ball Valve Brass Hose Bibbs w/ T Handle - 200 psi WOG non-shock IHBB50 ☺ IHBB75 THBB50 THBB75 THBB Series IHBB Series IHBBSS Series 1/2” 3/4” 1/2” 3/4” mip x ght (blue handle) mip x ght (blue handle) mip x ght ITALY (red handle) mip x ght ITALY (red handle) 12/144 12/144 10/100 10/100 10.13 11.86 16.60 19.84 1/4 turn Ball Valve 304 Stainless Steel Hose Bibbs w/ T Handle 200 psi WOG non-shock IHBB50SS 1/2” IHBB75SS 3/4” mip x ght mip x ght 12/144 12/144 22.32 22.79 1/4 turn Ball Valve Brass Hose Bibbs w/ T Handle - 200 psi WOG non-shock No garden hose thread - Sampling valve IHBB50NHT ☺ IHBB75NHT 1/2” 3/4” mip x spout (blue handle) mip x spout (blue handle) 12/144 12/144 10.59 11.47 IHBBNHT Series IHBBSSNHT Series 1/4 turn Ball Valve 304 Stainless Steel Hose Bibbs w/ T Handle 200 psi WOG non-shock - No garden hose thread - Sampling valve IHBB50SSNHT 1/2” mip x spout 12/144 IHBB75SSNHT 3/4” mip x spout 12/144 22.32 25.75 ☺ Has combination 1/2” mip and 1/2” solder connection TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 3.7 Plumbing Valves - Brass, Low Pressure BENT NOSE GARDEN • ANGLE SILL COCKS • FROST PROOF SILL COCKS • • 125 PSI WOG (working pressure - non-shock) Imported Part Number Size Description Ctn/Case Qty List Price Full Flow Bent Nose Garden Valves HBNG50 HBNG75 HBNG100 HBNG Series 1/2” 3/4” 1” fip x ght fip x ght fip x ght 12/72 12/72 12/72 $ 14.93 14.93 17.64 fip x ght fip x ght swt x ght swt x ght 12/144 12/144 12/144 12/144 10.23 11.86 9.71 10.56 Brass Angle Sill Cocks HSC50T HSC75T HSC50C HSC75C 1/2” 3/4” 1/2” 3/4” Chrome Plated Brass Frost Proof Sill Cocks, IPS x Sweat Fitting HSC Series H500 Series H504 H506 H508 H510 H512 H514 1/2 x 4” 1/2 x 6” 1/2 x 8” 1/2 x 10” 1/2 x 12” 1/2 x 14” 2/40 2/40 2/40 2/40 2/40 2/40 31.04 32.68 33.45 34.98 35.98 36.98 Chrome Plated Brass Frost Proof Sill Cocks w/ 3/4” mpt x 1/2” fip connection H504-3/4 H506-3/4 H508-3/4 H510-3/4 H512-3/4 H514-3/4 3/4 x 1/2 x 4” 3/4 x 1/2 x 6” 3/4 x 1/2 x 8” 3/4 x 1/2 x 10” 3/4 x 1/2 x 12” 3/4 x 1/2 x 14” 2/40 2/40 2/40 2/40 2/40 2/40 31.75 33.12 34.48 35.84 36.72 38.56 Chrome Plated Brass Anti-Siphon Sill Cocks* w/ 1/2” mip x 1/2” swt connection H504AS 1/2 x 4” 2/30 38.32 H500AS Series H506AS 1/2 x 6” H508AS 1/2 x 8” H510AS 1/2 x 10” H512AS 1/2 x 12” H514AS 1/2 x 14” * with integral vacuum breaker 2/30 2/30 2/30 2/30 2/30 39.95 41.38 42.77 44.15 45.72 20/200 $ 7.54 Vacuum Breaker HVB75 3/4” Meets ASSE 1011 specifications HVB75 6/14/11 TM 3.8 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Butterfly Valves - Cast Iron Cast Iron Butterfly Valve Features: HBFV Series ISO 9002 • Designed for swimming pool, irrigation and water systems. • Wafer body features 4 alignment holes. • Lever lock handle (spring loaded) provides excellent manual control for balancing or shut off services. • Notched throttling plate allows balancing in 10º increments in any position desired within 90º arc rotation of the disc. • Positive bubble-tight shutoff with minimum torque. • Seat face eliminates need for flange gaskets. • Phenolic backed seats prevent collapse, are stretch resistant, blowout proof and field replacable. • EPDM seats temperature rated at -30°F to 275°F. • 416 stainless steel shaft • Bidirectional dead-end capability for 250 psi (2” - 12”). • Compatible with ANSI 125/150 flanges. • Valves meet AWWA C-504-87 section 5 proof of design tests. • Designed to comply with MSS SP-67 and API 609. • Ductile iron, ENP plated disc. • Manufactured for AGI in an ISO 9002 facility. • Imported Part No. Size Ductile Iron ENP Plated Disc* HBFV2 HBFV21/2 HBFV3 HBFV4 HBFV5 HBFV6 HBFV8 HBFV10 HBFV12 HFBV GEAR Series * 2” 2-1/2” 3” 4” 5” 6” 8” 10” 12” Weight(lbs) Ctn Qty List Price 7 8 10 12 15.5 17.5 33 50 74 1 1 1 1 1 1 1 1 1 $ 107.09 126.65 162.95 209.38 229.78 273.75 461.73 577.31 917.27 1 1 351.89 573.50 1 1 1 1 1 1 1 1 17.46 17.46 17.46 20.87 20.87 42.94 42.94 48.88 Ductile Iron ENP Plated Disc - GEAR DRIVE * HBFV6-GEAR HBFV8 GEAR 6” 8” 28.5 54 Replacement Handles for HBFV Series BFH2 BFH3 BFH4 BFH5 BFH6 BFH8 BFH10 BFH12 2" 3" 4" 5" 6" 8" 10" 12" Flanges & Bolt kits available, see page 3.26 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 3.23 Butterfly Valves - Cast Iron MATERIAL SPECIFICATIONS No. 1 2 3 4 5 6 7 8-10 Part Body Disc Seat Shaft Taper Pin Key O-ring Bushing Material Cast Iron Ductile Iron EPDM 416 Stainless Steel 316 Stainless Steel Carbon Steel EPDM PTFE SIZE \ DIMENSION (in) for HBFV Series A B C D E 2” 6 3/8 3 1/4 2 1/2” 6 7/8 3 3/4 3” 7 1/8 4 4” 7 7/8 4 7/8 5” 8 3/8 5 3/8 6” 8 7/8 5 7/8 8” 10 1/4 7 1/8 10” 11 1/2 8 1/4 12” 13 1/4 9 3/4 1 3/4 1 7/8 1 7/8 2 1/8 2 1/4 2 1/4 2 1/2 2 3/4 3 1/8 1 1/4 1 1/4 1 1/4 1 1/4 13/16 1 1/4 1 3/4 1 3/4 1 3/4 1/2 1/2 1/2 5/8 3/4 3/4 7/8 1 1/8 1 1/4 F G H J K L2 M2 3/8 3/8 3/8 3/8 3/8 3/8 7/16 7/16 7/16 2.76 2.76 2.76 2.76 2.76 2.76 4.02 4.02 4.02 .39 .39 .39 .47 .55 .55 .67 .87 .95 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 3 3/4 3 3/4 3 3/4 4 3/4 5 1/2 6 7 1/2 8 1/2 9 1/2 11 3/4 14.14 17 11/16 11/16 11/16 11/16 13/16 13/16 13/16 15/16 15/16 4 4 4 4 4 4 4 4 4 4/2009 TM 3.24 N O 4 1.26 4 3/4 1.83 5 1/8 2.54 6 3/4 3.54 7 3/4 4.36 8 5/8 5.72 10 9/16 7.6 13 1/16 9.5 16 1/8 11.45 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Ultraviolet Disinfection Systems Ultraviolet disinfection is an effective way to provide bacteria free water for home or industry. • • • • • • Completely automatic. Compact and easy to install. No chemicals required. Low operating costs. Low maintenance. No taste or odor. SAFE LITE Economy Series UV Disinfection System Features: • Quick installation. • Economical. • 304 stainless steel chamber. Electropolished. • Powered by wall mounted ballast with lamp on indicator. • 8 gallon complete with flow control. UVSL Series Standard Series UV Disinfection System Features: UV Series: • Constructed for wall mounting. • 304 stainless steel chamber. Electropolished. • Sight port to safely view operation. • 7 & 15 gallon complete with flow control. • CSA approved. UV-W Series: • Same as UV series with: • Internal wiper unit for manual cleaning of quartz sleeve. • 8 & 15 gallon complete with flow control. UV, UV-SE & UV-W Series TM UV-SE Series: • Same as UV series with: • 7 & 15 gallon complete with flow control. Remote flow control adder for 24 gallon (not included) • Electronic built-in “lamp-out” circuit/alarm. • ON/OFF indicator light. • Standard auxillary output terminal for optional solenoid shut-off (UVS077 not included). • CSA pending www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 4/2009 4.45 Ultraviolet Disinfection Systems Water entering the disinfection unit flows in the space between the quartz sleeve and the chamber wall. Turbulent flow through the unit insures exposure of micro-organisms to lethal dosages of ultraviolet rays. Water exiting the chamber is safe and ready to use. Typical Installation Part Number Max GPM # of Lamps KW @ 120V AMPS @ 120V 220V Pipe Size Dimensions LxWxD Weight Flow Lamp Out Control Alarm List Price Safe Lite Economy Series UVSL8 8 1 0.07 .60 .30 3/4” MIP 18”x4”x7” 28 Yes No $ 858.70 1 1 0.07 0.07 .60 .60 .30 .30 3/4” MIP 3/4” MIP 18”x4”x7” 36”x4”x7” 19 28 Yes Yes No No 1270.91 1600.46 Yes Yes Yes Yes 1289.28 1621.50 Yes No 1681.10 Standard Series UV7 UV15 7 15 Standard Series w/ Lamp out alarm UV7SE 7 1 0.07 .60 .30 3/4” MIP 18”x4”x7” 19 UV15SE 15 1 0.07 .60 .30 3/4” MIP 36”x4”x7” 28 Lamp out circuit board provides a visual and audible alarm when a lamp outage occurs. Solenoid protection can be added via the on-board relay and the purchase of an UVS077 Solenoid. 220V 50Hz less power cord net adder $ 35.72. Not available on SE series. Non standard porting net adder $ 75.00 Standard Series w/ Internal wiper* UV8W 8 1 0.07 .60 .30 3/4” MIP 18”x4”x7” 25 * Check with AGI for delivery lead time on UV-W series 6/14/11 4.46 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Ultraviolet Disinfection Parts Part Number Description For Use With Series UV Dosage meter w/ alarm Shut-0ff Solenoid 1” FNPT, use w/ UVM254, or UVM257 Specify when ordering UV, UV-W UV, UV-W, UV-SE, UVC List Price Accessories UVM254 UVS079 $ 1169.19 232.97 UVM254 Maintenance & Repair Parts UVP4025 UVP5175 UVP8544 UVP8222 UVP8224 UVP8225 Brass end nut assembly - complete (new) Monitor lens kit O-ring - Standard for end nut Ballast - (120V, 60 Hz) Ballast - (120V, 60Hz) Ballast - (120V, 60Hz) All models 7-8 gpm units 12-45 gpm units 24-120 gpm units 68.89 62.77 3.21 81.58 88.68 121.93 UVS077 Service Kits - Include bulb, quartz sleeve, o-rings and small tube of silicone. Recommended 1 per year. UVK07 Includes (1) UVB1805 bulb, (1) UVQS6211 sleeve, (2) UVP8544 o-rings UVK015 Includes (1) UVB8246 bulb, (1) UVQS6608 sleeve, (2) UVP8544 o-rings UVK024 Includes (2) UVB8246 bulb, (2) UVQS6608 sleeve, (4) UVP8544 o-rings TM UV7, UV7SE 146.49 All 15 models 195.48 All 24 models 396.89 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 4.47 Ultraviolet Disinfection Parts Part Number Bulb Length For Use With Series Description List Price UV Bulbs UVB1805 UVB1814 UVB8246 UVB11149 UVB11550 14” 27.3” 33.2” 45.88” 61.2” 1 pin each end 1 pin each end 1 pin each end 1 pin each end 1 pin each end UVB2436 UVB2457 UVB2793 17” 18” 31.34” 2 pins each end 2 pins each end 2 pins each end UVB4287 UVB4330 UVB4357 UVB4409 UVB4436 UVB4450 11.3” 13” 14.5” 16” 17” 17.71” 4 pins one end 4 pins one end 4 pins one end 4 pins one end 4 pins one end 4 pins one end UV7, UV7SE $ 112.79 130.82 All 15 UVC80 24 28 60 120 130.82 130.82 UVC130 bulb 191.03 UVB Series - 1 pin each end UVB Series - 2 pins each end UVB Series - 4 pins one end DWSW-8 DWS-8V, SE8V, SL5, SL8, SL8V DWS-12V, SE12V UVB4739 29” 4 pins one end UVB4793 31.34” 4 pins one end UVB4810 32” 4 pins one end UVB4854 33.2” 4 pins one end Bulb length is from end to end excluding pin connection. 130.82 130.82 130.82 130.82 130.82 130.82 130.82 130.82 130.82 130.82 130.82 130.82 130.82 Quartz Sleeves - Open Ends (22 mm ID, 24.5mm OD) UVQS Series UVQS6211 UVQS1483 UVQS6608 UVQS1575 14.37” 19” 32.62” 62” Quartz Sleeve Quartz Sleeve Quartz Sleeve Quartz Sleeve UV7, UV7SE DWSW-8 All 12 15 24 48 60 80 120 UVC130 39.67 49.90 83.42 168.40 Quartz Sleeves - Domed Ends (22 mm ID, 24.5mm OD) UVQS-D Series 6/14/11 4.48 UVQS1435D UVQS476D UVQS335D 17” 19” 34” TM Dome End Quartz Sleeve Dome End Quartz Sleeve SL5, SL8, DWS-8V Dome End Quartz Sleeve 84.67 83.42 83.42 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Compression Couplings-Imported, PVC/CPVC PVC Compressing Coupling Features: • Iron Pipe Size (PVC), Copper Tube Size (CPVC) • For use with cold water (PVC) or hot water (CPVC-CTS) • Natural rubber gasket seals • Rated at 200 psi at 70°F • Imported "PC" Series IPS DIMENSIONS (IN.) SIZE D d d1 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 6” 1.85 2.09 2.40 2.87 3.15 3.62 4.53 5.28 6.34 8.78 .91 1.18 1.42 1.81 2.05 2.56 2.52 3.62 4.65 6.85 L .83 1.04 1.31 1.65 1.89 2.37 2.87 3.49 4.49 6.62 5.24 5.32 5.75 6.30 6.89 7.87 9.92 10.87 11.93 11.22 "HW" Series CTS DIMENSIONS (IN.) 1/2” 3/4” 1.30 1.85 .71 .95 .63 .88 4.49 5.00 MATERIAL SPECIFICATIONS # 1 2 3 Material Part Body Compression Nut Gasket - PVC Gasket - CPVC UPVC, CPVC UPVC, CPVC NR EPDM Part Number Material Size Case Qty PC10-1/2 PC10-3/4 PC10-1 PC10-11/4 PC10-11/2 PC10-2 PC10-21/2 PC10-3 PC10-4 PC10-6 PVC PVC PVC PVC PVC PVC PVC PVC PVC PVC 1/2” IPS 3/4” IPS 1” IPS 1 1/4” IPS 1 1/2” IPS 2” IPS 2 1/2” IPS 3” IPS 4” IPS 6” IPS 100 90 60 40 30 20 10 4 2 2 HW10CTS1/2 HW10CTS3/4 CPVC CPVC 1/2” CTS 3/4” CTS 20/360 20/240 Part Number For Use with Coupling Sizes Ctn Qty List Price $ 2.33 2.70 3.49 4.20 5.79 8.06 18.42 26.06 34.39 82.73 4.07 4.93 List Price Adjustable Strap Wrench SW400 SW600 1/2” through 4” 1/2” through 6” 10/60 10/60 $ 17.68 20.18 SW Series TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 4/2009 6.1 Compression Fittings, Galvanized Galvanized Long Pattern Compressing Fitting Features: Recommended Maximum Pressure (PSI) • Bodies made of steel tubing. (GC 10), malleable iron (GC10C) • End nuts made of malleable iron. • Galvanized finish • Buna-N gaskets on domestic fittings. • SBR gaskets on GC10C series. • Maximum rated service temperature for gaskets: 212°F (100º C). Size WARNING: Designer and/or contractor must provide suitable anchoring of piping to prevent pull-out from fittings when applications subject piping to external forces such as ground shift and temperature variations that cause linear pipe contraction. 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” Torque Ft. Lbs 150 150 225 225 225 300 Anchored Piping 150 150 100 100 100 75 Coupling GC10C - Long Pattern - Imported - Malleable Iron, 125 PSI, 120° F Part Number Size Pipe O.D. Ctn/Case Qty List Price GC10C Series ISO 9002 GC10C1/2 GC10C3/4 GC10C1 GC10C11/4 GC10C11/2 GC10C2 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” .840 1.050 1.315 1.660 1.900 2.375 Coupling GC10 - Made in U.S.A. - Steel Tube Part Number Size Pipe O.D. GC10 Series GC10-1/2 GC10-3/4 GC10-1 GC10-11/4 GC10-11/2 GC10-2 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” .840 1.050 1.315 1.660 1.900 2.375 Adapters GC12 - Made in U.S.A. - Steel Tube Part Number Size Pipe O.D. GC12-1/2 GC12-3/4 GC12-1 GC12-11/4 GC12-11/2 GC12-2 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” .840 1.050 1.315 1.660 1.900 2.375 30 / 60 25 / 50 15 / 30 12 / 24 9 / 18 14 Ctn Qty $ 10.20 11.44 13.42 17.04 20.19 30.19 List Price 12 12 12 6 6 6 $ 25.66 27.98 33.04 44.12 48.73 61.24 Ctn Qty List Price 12 12 12 6 6 6 $ 37.50 36.18 38.31 45.54 63.32 63.44 GC12 Series 6/14/11 6.2 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Pipe Repair Clamps Repair Clamp Features: • Pipe repair clamps eliminate the need for costly pipe replacement for simple leaks. • Non-corrosive clamp band is made of annealed stainless steel. • Nuts and bolts are cadmium plated with a chromate finish; heavy duty hex nut with washer. • Lugs are made of annealed, malleable iron for maximum strength and permanence; iron phosphate finish. • Neoprene gasket with maximum rated service temperature of 212° F (100ºC). • Imported Straight through bolt pull on lugs gives more uniform pressure on the band, more pressure on pipe with less torque on nut. Oval lug opening in band won’t tear - no corners to rip out as with square hole. Lugs above pipe level don’t pull into pipe. Gives more tension on band - more sealing power yet won’t crush pipe. Band covers lead edge of lug. Equal pressure across entire band. No friction - no cutting into pipe surface by raw edge of band opening. TM Part Number 3” Wide, 1 Bolt HRC3-3/8 HRC3-1/2 HRC3-3/4 HRC3-1 HRC3-11/4 HRC3-11/2 HRC3-2 HRC3-21/2 HRC3-3 HRC3-4 Nominal Pipe Size IPS Pipe O.D. CTS Tube O.D. Ctn Qty List Price 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” .675 .840 1.050 1.315 1.660 1.900 2.375 2.875 3.50 4.50 .625 .875 1.125 1.375 1.625 6/72 6/72 6/72 6/72 6/72 6/72 6/72 6/48 6/48 6/24 $ 5.94 6.98 7.13 7.97 8.79 8.90 10.67 11.37 12.05 12.35 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” .840 1.050 1.315 1.660 1.900 2.375 2.875 3.50 4.50 .875 1.125 1.375 1.625 6/56 6/56 6/56 6/56 6/56 6/56 6/24 6/24 6/24 12.54 13.44 13.60 15.06 16.49 19.77 21.28 22.44 22.92 6” Wide, 2 Bolts HRC6-1/2 HRC6-3/4 HRC6-1 HRC6-11/4 HRC6-11/2 HRC6-2 HRC6-21/2 HRC6-3 HRC6-4 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 6.3 Couplings, Caps - Flexible & No-Hub Coupling, Cap Features: • Flexible couplings for joining all types of sewer pipe, including transitions from one type to another. • NO-HUB couplings for joining cast iron pipe sections • End Caps for capping cast iron, steel, PVC and ABS pipe. • 300 Series stainless steel clamps • Meets IAPMO File #0317, BOCA ESI RR#90-68, SBCCI PST&ESI Report #9483B • CSA Approved Part Number Size NO HUB COUPLINGS Connection C150C C200C C215C C300C C400C CI X CI CI X CI CI X CI CI X CI CI X CI 100 100 100 100 100 $ 9.37 9.37 10.92 10.92 13.22 1 1/2 X 1 1/2 2X2 2 X 1 1/2 3X3 4X4 Ctn Qty List Price FLEXIBLE COUPLINGS C Series MR Series MR0244 4X4 CLAY X CI/PL 18 14.44 MR5615/125 11/4 x 1 1/2 CI/PL x TUBE 24 7.60 MR56125 1 1/2” Tubing, Copper or 1 1/4” PL to Same 24 6.89 MR5615 MR5622/125 MR56215 MR5622 MR56315 MR5632 MR5633 MR5642 MR5643 MR5644 MR5655 MR5664 MR5666 1 1/2 x 1 1/2 2 x 1 1/4 2 X 1 1/2 2X2 3 x 1 1/2 3X2 3X3 4x2 4X3 4X4 5X5 6x4 6X6 CI/PL X CI/PL CI/PL x CI/PL CI/PL X CI/PL CI/PL X CI/PL CI/PL x CI/PL CI/PL X CI/PL CI/PL X CI/PL CI/PL x CI/PL CI/PL X CI/PL CI/PL X CI/PL CI/PL X CI/PL CI/PL x CI/PL CI/PL X CI/PL 24 24 24 24 24 24 18 18 18 24 14 10 12 7.31 7.66 8.33 7.88 13.93 9.84 10.64 17.19 14.35 13.33 20.88 31.02 28.51 DRAIN PIPING TO TUBULAR TRAP * MRTC Series MRTC150 1 1/4” x 1 1/2” 24 MRDTC150 1 1/4” or 1 1/2” x 1 1/4” or 1 1/2” 24 MRDTC215 2” x 1 1/4” or 1 1/2” 24 * Any combination of 1 1/4” or 1 1/2” tubular drain (plastic, tubular or copper) 4.19 5.13 6.77 END CAPS 0701-011 0702-019 0703-017 0704-015 0705-020 0706-028 1 1/2” 2” 3” 4” 5” 6” 24 24 24 24 20 12 4.08 4.80 6.07 7.76 15.51 15.97 07 Series 7/20/10 6.4 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Clear Braided PVC Hose Clear Braided PVC Hose Standard Wall, Class 125 Features: • Flexible, see through clear hose with braid pattern reinforcement of two polyester spirals. • Flexible clear PVC NSF 51 certified to 100ºF (38ºC), USP CLASS V1 rated. • All hose compound ingredients used are listed in US FDA CFR, Title 21. • Temperature range + 25º to 150º F / -5º to +65ºC. • Silicone free. • Food and beverage grade, standard wall. • Use for air, water lines. Part Number Nominal (inches) ID OD CBH316-1 CBH25-1 CBH516-1 CBH38-1 CBH50-1 CBH50-3 CBH58-1 CBH75-1 CBH75-3 CBH100-1 CBH100-2 CBH125-50 CBH125-1 CBH150-50 CBH150-1 CBH200-50 CBH200-1 3/16 1/4 5/16 3/8 1/2 1/2 5/8 3/4 3/4 1 1 1 1/4 1 1/4 1 1/2 1 1/2 2 2 0.375 0.438 0.525 0.594 0.750 0.750 0.875 1.030 1.030 1.300 1.300 1.625 1.625 1.937 1.937 2.490 2.490 Max Working Pressure PSI@68ºF PSI@122ºF 250 250 250 225 200 200 200 150 150 125 125 100 100 100 100 75 75 105 105 105 97 86 86 86 65 65 54 54 43 43 43 43 33 33 Reel Length Approx Wt per CFT. List Price Per Reel 100’ 100’ 100’ 100’ 100’ 300’ 100’ 100’ 300’ 100’ 200’ 50’ 100’ 50’ 100’ 50’ 100’ 4.5 lbs 5.7 lbs 7.5 lbs 9.0 lbs 13.8 lbs 13.8 lbs 16.5 lbs 21.9 lbs 21.9 lbs 31.5 lbs 31.5 lbs 45.0 lbs 45.0 lbs 64.0 lbs 64.0 lbs 95.0 lbs 95.0 lbs $ 117.06 102.32 150.56 145.37 195.91 587.73 231.09 293.71 881.15 378.42 707.34 359.08 718.17 432.96 865.91 739.93 1479.89 ** Temperatures higher than 68º F reduce available working pressure. See next page for temperature, working pressure calculation chart and cautionary note. TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 6.13 Clear Braided PVC Hose Effects of Elevated Temperatures on Thermoplastic Hose. The compounds used in clear braided PVC hose are generally referred to as thermoplastics. These materials achieve their optimum physical properties at room temperature, 68ºF (20ºC). As these materials are exposed to increased ambient temperatures, they will soften and their physical properties will change. This will have the effect of sharply reducing the available working pressure. Coupling retention will also be reduced. The charts below illustrate this effect. In all cases, the product should be tested in a controlled, secure and safe environment, and all operating conditions should be considered prior to use. All published working pressures of AGI Series CBH hose are based on a room temperature of 68ºF (20ºC). Example from the Fahrenheit Chart If working pressure at 68ºF is 200 psi, then the WP at 110ºF is 200 x 50%, or 100 psi Example from the Celsius Chart If working pressure at 20º is 14 bar, then the WP at 50ºC is 14 x 50%, or 5.6 bar CAUTIONARY NOTE The charts are to used as a guideline only. The information and recommendations contained here are, to the best of our manufacturer’s knowledge, accurate and reliable, but no guarantee of their accuracy is made. All products are sold upon the condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses, and purchasers assume all risks and liability for the results of use of the products, including use in accordance with seller’s recommendations. Variability in length of exposure, temperature, pressure, velocity of fluid, and chemical concentration all contribute to reduced working pressure and hose reliability. 4/2009 6.14 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Washer & Ice Maker Boxes Washer Box Features: • Center drain or dual drain. • High impact polystyrene. • 4 support brackets. • Easy drain knockout. • Top mount knockouts • Box dimensions: 8 3/4” w x 7 1/2” h x 3 5/8” d • Faceplate dimensions: 11 3/4” w x 10 1/8” h Washer Box Ice Maker Box Features: • 2 support brackets. • High impact polystyrene. • Valves comply with requirements of NSF 61, Section 9. • Available in several box and valve configurations. • Provides quick, safe water supply and shutoff for refrigerator ice maker and water dispenser. • Box dimensions: 6” w x 6” h x 3 3/8”D. • Faceplate dimensions: 8 1/4” w x 8 1/4” H Ice Maker Box Part Number Valve Connection Valve Type Drain 1/2” Sweat 1/2” CPVC 1/2” PEX 1/4 turn brass ball valves 1/4 turn brass ball valves 1/4 turn brass ball valves Center Center Center 12 12 12 $ 61.12 63.31 71.27 1/2” Sweat 1/2” CPVC 1/2” Sweat 1/4 turn brass ball valves 1/4 turn brass ball valves Single Lever ball valves Dual Dual Dual 12 12 12 74.76 74.76 117.68 1/2” Sweat 1/2” CPVC 1/2” PEX Box Only 1/4 turn brass ball valve 1/4 turn brass ball valve 1/4 turn brass ball valve None 6 6 6 6 46.07 46.05 46.53 14.64 Ctn Qty List Price Standard Washer Boxes 38934 38937 38945 Dual Drain Washer Boxes 38673 38670 38660 Ice Maker Boxes 38681 38680 38684 38805 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 5/3/11 6.17 Closet Flanges & Gaskets Level Fit Closet Flange Features: • 3” or 4” all plastic flange solvent welds inside of 4” or over 3” Sch 40 DWV pipe. • Four mounting slots. • Four countersunk holes for secure attachment to the floor. 43503 Level Fit Closet Flange with metal ring Features: • The metal ring provides added strength and cracking resistance to the flange and can be rotated to allow precise alignment of bolts and screws. • 3” or 4” flange solvent welds inside of 4” or over 3” Sch 40 DWV pipe. Level Fit Offset Closet Flange with metal ring Features: 43513 • The metal ring provides added strength and cracking resistance to the flange and can be rotated to allow precise alignment of bolts and screws. • 3” or 4” flange solvent welds inside of 4” or over 3” Sch 40 DWV pipe. • 2” offset allows a margin of error for drain pipe/flange alignment. Part Number Material Description Size Ctn Qty List Price PVC PVC ABS Plastic ring closet flange w/ KO Plastic ring closet flange Plastic ring closet flange 3” x 4” 3” x 4” 3” x 4” 12 12 12 $ 7.23 6.38 6.82 Metal ring closet flange Metal ring closet flange 3” x 4” 3” x 4” 12 12 10.56 12.84 Offset closet flange Offset closet flange 3” x 4” 3” x 4” 12 12 19.18 27.36 Closet Flanges 43500 43505 43503 43502 Closet Flanges with Metal Adjustable Ring 43513 43512 PVC ABS Offset Closet Flanges 43501 43500 PVC ABS Adjustable Urinal Flange Kit Features: • Horizontal mounting slots accommodate urinals with 3 1/2” to 7” mount centers. • Kit includes all bolts, nuts, washers and gaskets. • Flanges solvent weld into any 2” fitting. They do not weld “over”. Part Number Material Description Size 43543 PVC Urinal flange kit 2” Ctn Qty 10 List Price $ 38.13 Wax Closet Gasket Features: • Amber-color. • Meets Federal specifications HH-C-536A. 6/14/11 6.18 Part Number Description & Material Size Ctn Qty AGWAX AGWAXH AGWAXJ Standard wax gasket Wax gasket w/Horn Jumbo wax gasket 1 1/2” 3”, 4” 3”, 4” 3”, 4” 48 24 24 TM List Price $ 2.50 3.16 6.09 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Perforated Hanger Strapping 101 Series Galvanized Duct Tape • 24 and 28 gauge • Alternate 1/4” and 5/16” bolt and nail holes • 3/4” width 102 Series Plastic Polypropylene Hanger Strapping • 1/8” dia. holes • Max working load - 15# @ 85° F • Breaking Strength - 100# @ 68° F 100G Series Galvanized or Zinc Plated • Perforated hanger strapping • 20 to 28 gauge • 1/4” bolt holes • 3/4” width Part Number Size Ctn Qty List Price 101 Series - Galvanized Duct Tape 101-10 101-50 101-100 101-10-28 101-50-28 101-100-28 101 Series 3/4” x 10’ x 24 gauge 3/4” x 50’ x 24 gauge 3/4” x 100’ x 24 gauge 3/4” x 10’ x 28 gauge 3/4” x 50’ x 28 gauge 3/4” x 100’ x 28 gauge 50 10 5 50 10 5 $ 2.57 14.78 28.60 2.28 13.56 24.64 BULK/100 1/40 1/20 1/10 2.42 4.71 12.59 22.50 50 10 5 50 50 10 5 50 10 5 2.56 14.78 28.60 2.12 3.21 18.48 34.56 3.75 20.19 23.42 50 2.28 102 Series - Plastic Polypropylene 102-10 102-25 102-50 102-100 3/4” x 10' x .05 gauge 3/4” x 25' x .05 gauge 3/4” x 50' x .05 gauge 3/4” x 100' x .05 gauge 102 Series 100G Series - Galvanized or Zinc Plated 100G and 100S Series 100G-10-24 100G-50-24 100G-100-24 100G-10-28 100G-10-22 100G-50-22 100G-100-22 100G-10-20 100G-50-20 100G-100-20 3/4” x 10’ x 24 gauge 3/4” x 50’ x 24 gauge 3/4” x 100’ x 24 gauge 3/4” x 10’ x 28 gauge 3/4” x 10’ x 22 gauge 3/4” x 50’ x 22 gauge 3/4” x 100’ x 22 gauge 3/4” x 10’ x 20 gauge 3/4” x 50’ x 20 gauge 3/4” x 100’ x 20 gauge 100S Series - Steel Plain 100S-10-24 TM 3/4” x 10’ x 24 gauge www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 6.27 Clip & Van Hangers 604 Series Insulated Glide Clip Features: 604 Series • Specially compounded material wrapped around copper clad steel permits smooth, silent pipe movement. • Prevents electrolysis and corrosion. • Resists temperature up to 280º F(137º C). Ideal for hot water heating or supply lines –– eliminates creaking noises made by pipe expanding and contracting against wood surfaces. 606 Series Van Hanger Features: • Unique design for applications that require space between pipe and mounting surface. • Copper clad steel, heavy duty metal construction. 606 Series 608 Series Copper Tube Strap Features: • Copper clad steel; heavy duty metal construction. 608 Series Part Number Size Mounting Hardware (incl) Ctn Qty List Price 1/2” 3/4” 1” 1-1/4” Copper Clad Nails Copper Clad Nails Copper Clad Nails Copper Clad Nails 10 10 10 10 $ 3.44 3.70 4.64 5.23 1/2” 3/4” 1” Copper Clad Screw Copper Clad Screw Copper Clad Screw 20 20 20 2.64 2.86 3.12 1/2” 3/4” 1” 1-1/4” Copper Clad Nails Copper Clad Nails Copper Clad Nails Copper Clad Nails 100 50 50 50 0.36 0.46 0.57 0.67 Insulated Glide Clips 604-1/2 604-3/4 604-1 604-11/4 Copper Clad Van Hangers 606-1/2 606-3/4 606-1 Copper Tube Straps 608-1/2 608-3/4 608-1 608-11/4 5/3/11 6.28 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Pipe Straps & Clamps 500 Series Copper Clad Tube Straps • 2 ear and one ear styles 510 Series Copper Clad Tube Straps • One ear styles 511 Series Plastic Tube Tallon • Made of polyethylene • 1/2, 3/4 and 1” sizes available 513 Series Single Shot Hanger • Plastic with nail 515 Series Suspension Clamp • Made of polyethylene Part Number Size Ctn Qty List Price Copper Clad Tube Straps, TWO HOLE 500-1/2 500-3/4 500-1 500-11/4 1/2” 3/4” 1” 1 1/4” 100 100 100 100 $ 0.13 0.16 0.19 0.47 1/4” 3/8” 1/2” 3/4” 1” 1 1/2” 2” 100 100 100 100 100 50 50 0.43 0.43 0.45 0.49 0.96 2.27 2.65 1/2” 3/4” 1” 100 100 50 0.23 0.32 0.86 1/2” 3/4” 50 50 0.65 0.81 1/2” 3/4” 1” 100 100 50 0.47 0.50 1.45 500 Series Copper Clad Tube Straps, ONE HOLE 510-1/4 510-3/8 510-1/2 510-3/4 510-1 510-11/2 510-2 510 Series Tube Tallon Clamp 511-1/2 511-3/4 511-1 511 Series Suspension Clamp 513-1/2 513-3/4 Suspension Clamp 515-1/2 515-3/4 515-1 513 Series 515 Series TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 6.29 Pipe Straps 600 Series Galvanized Pipe Straps • 2 ear • 1/2 - 2” sizes available 603 Series Plastic Coated Pipe Straps • 2 ear • 1” - 2” sizes available 610 and 620 Series Galvanized Pipe Straps • 1 ear • 1” - 2” sizes available Part Number Size Ctn Qty List Price Galvanized Pipe Straps 600 Series 600-1/4 600-3/8 600-1/2 600-3/4 600-1 600-11/4 600-11/2 600-2 600-21/2 600-3 600-4 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 100 100 100 100 100 50 50 50 25 25 25 $ 0.18 0.18 0.15 0.21 0.34 0.44 0.51 0.79 1.28 1.64 2.73 1” 1 1/4” 1 1/2” 2” 3” 4” 6” 50 50 50 50 25 25 10 4.02 4.28 4.68 4.96 8.57 10.71 28.39 1/4” Pipe 3/8” Pipe 1/2” Pipe 3/4” Pipe 1” Pipe 1 1/4” Pipe 1 1/2” Pipe 2” Pipe 100 100 100 100 100 100 50 50 0.25 0.32 0.37 0.61 0.70 1.13 1.94 2.27 1/2” EMT 3/4” EMT 1” EMT 1 1/4” EMT 1 1/2” EMT 2” EMT 100 100 100 100 50 50 0.37 0.38 0.48 0.83 1.19 2.27 Plastic Coated Pipe Straps 603 Series 603-1 603-11/4 603-11/2 603-2 603-3 603-4 603-6 One Hole Pipe Straps 610/620 Series 610-1/4 610-3/8 610-1/2 610-3/4 610-1 610-11/4 610-11/2 610-2 One Hole EMT Straps 620-1/2 620-3/4 620-1 620-11/4 620-11/2 620-2 6/14/11 6.30 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Tube & Pipe Hooks 200 S Series Bright Steel 200 C Series Copper Clad Part Number Size (pipe x length) Ctn Qty List Price Bright Steel 200S-1/2X4 200S-1/2X6 200S-1/2X8 200S-1/2X10 200S-1/2x12 200S-3/4X4 200S-3/4X6 200S-3/4X12 200S-1X4 200S-1X6 200S-1X8 200S-1X10 200S-11/4X6 200S-11/4X8 200S-11/4X10 200S-11/4X12 200S-11/2X6 200S-11/2X8 200S-11/2X10 200S-11/2X12 200S-2X6 200S-2X8 200S-2X10 200S-2X12 200S and 200C Series 1/2” X 4” 1/2” X 6” 1/2” X 8” 1/2” X 10” 1/2” x 12” 3/4” X 4” 3/4” X 6” 3/4” X 12” 1” X 4” 1” X 6” 1” X 8” 1” X 10” 1 1/4” X 6” 1 1/4” X 8” 1 1/4” X 10” 1 1/4” X 12” 1 1/2” X 6” 1 1/2” X 8” 1 1/2” X 10” 1 1/2” X 12” 2” X 6” 2” X 8” 2” X 10” 2” X 12” 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 $ 0.51 0.57 0.68 1.26 1.41 0.51 0.57 1.41 0.51 0.57 0.68 1.26 0.92 1.11 1.26 1.41 0.92 1.11 1.26 1.41 0.92 1.11 1.26 1.41 1/2” X 4” 1/2” X 6” 1/2” X 8” 1/2” X 10” 1/2” X 12” 3/4” X 4” 3/4”X 6” 3/4” X 8” 3/4” X 10” 3/4” X 12” 1” X 4” 1” X 6” 1” X 8” 1” X 10” 1” X 12” 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 0.59 0.66 0.82 1.54 1.74 0.59 0.66 0.82 1.54 1.74 0.59 0.66 0.82 1.54 1.74 Copper Clad 200C-1/2X4 200C-1/2X6 200C-1/2X8 200C-1/2X10 200C-1/2X12 200C-3/4X4 200C-3/4X6 200C-3/4X8 200C-3/4X10 200C-3/4X12 200C-1X4 200C-1X6 200C-1X8 200C-1X10 200C-1X12 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 6.31 Tube & Pipe Hooks 200 C Series Copper Clad 200 P Series Plastic Coated 200S and 200C Series Part Number Size (pipe x length) Ctn Qty List Price 200C-11/4X6 200C-11/4X8 200C-11/4X10 200C-11/4X12 200C-11/2X6 200C-11/2X8 200C-11/2X10 200C-11/2X12 200C-2X6 200C-2X8 200C-2X10 200C-2X12 1 1/4” X 6” 1 1/4” X 8” 1 1/4” X 10” 1 1/4” X 12” 1 1/2” X 6” 1 1/2” X 8” 1 1/2” X 10” 1 1/2” X 12” 2” X 6” 2” X 8” 2” X 10” 2” X 12” 50 50 50 50 50 50 50 50 50 50 50 50 $ 0.66 0.82 1.54 1.74 1.08 1.17 1.54 1.74 1.08 1.17 1.54 1.74 1/2” X 4” 1/2” X 6” 1/2” X 8” 1/2” X 10” 1/2” x 12” 1/2” Pipe* x 4" 1/2” Pipe* x 6" 1/2” Pipe* x 8" 1/2” Pipe* x 10" 1/2” Pipe* x 12" 3/4” Pipe* x 4" 3/4” Pipe* x 6" 3/4” Pipe* x 8" 3/4” Pipe* x 10" 3/4” Pipe* x 12" 1” Pipe * x 6" 1” Pipe * x 8" 1” Pipe * x 10" 1” Pipe * x 12" 1 1/4” Pipe * x 6" 1 1/4” Pipe * x 8" 1 1/4” Pipe * x 10" 1 1/4” Pipe * x 12" 1 1/2” Pipe * x 6" 1 1/2” Pipe * x 8" 1 1/2” Pipe * x 10" 1 1/2” Pipe * x 12" 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 1.77 1.88 2.72 4.87 6.27 1.77 1.88 2.72 4.87 6.27 1.77 1.88 2.72 4.87 6.27 3.44 4.53 4.87 6.27 3.44 4.53 4.87 6.27 3.44 4.53 4.87 6.27 Plastic Coated 200P Series 200P-1/2X4 200P-1/2X6 200P-1/2X8 200P-1/2X10 200P-1/2x12 200P-3/4X4 200P-3/4X6 200P-3/4X8 200P-3/4X10 200P-3/4X12 200P-1x4 200P-1X6 200P-1X8 200P-1X10 200P-1X12 200P-11/4X6 200P-11/4X8 200P-11/4X10 200P-11/4X12 200P-11/2X6 200P-11/2X8 200P-11/2X10 200P-11/2X12 200P-2X6 200P-2X8 200P-2X10 200P-2X12 * For plastic coated steel pipe hooks, order tube hook of next larger size. Ex: For 3/4” x 6” pipe use 1” x 6” hook. 6/14/11 6.32 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Pipe Hangers DWV Hanger - Galvanized • Not plastic coated Part Number Size Ctn Qty List Price Light Clevis 104-1/2 104-3/4 104-1 104-11/4 104-11/2 104-2 104-21/2 104-3 104-4 Clevis 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 100 100 100 100 100 50 25 25 25 $ 1.68 1.72 1.77 1.88 2.04 2.17 3.80 4.19 5.68 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 100 100 100 100 100 50 1.93 1.98 2.31 2.47 2.73 3.27 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 5” 6” 8” 10” 12” 100 100 100 100 100 50 25 25 25 15 10 8 BULK BULK 1.93 1.93 2.04 2.33 2.52 2.76 5.41 5.84 7.23 13.82 15.27 23.90 64.28 61.69 1 1/2” 2” 3” 4” 50 50 50 50 Copperclad Clevis 406-1/2 406-3/4 406-1 406-11/4 406-11/2 406-2 Standard Clevis, Black 204-1/2 204-3/4 204-1 204-11/4 204-11/2 204-2 204-21/2 204-3 204-4 204-5 204-6 204-8 204-10 204-12 DWV Hanger - Galvanized 120-11/2 120-2 120-3 120-4 DWV Hanger TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 2.35 2.47 2.57 2.95 6/14/11 6.33 Pipe Hangers Adjustable Swivel Ring • Galvanized, or copperclad • 1/2” to 4” - 3/8” rod • 5” to 8” - 1/2” rod 900 All Thread Rod • 6’ length, plain Part Number Size Ctn Qty List Price Adjustable Swivel Ring, Galvanized 300 Swivel Ring 300-1/2 300-3/4 300-1 300-11/4 300-11/2 300-2 300-21/2 300-3 300-4 300-5 300-6 300-8 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 5” 6” 8” 100 100 100 100 100 100 50 50 25 20 20 10 $ 1.55 1.55 1.64 1.64 1.93 2.09 3.75 4.44 5.68 7.88 8.62 10.61 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 100 100 100 100 100 100 2.67 2.72 2.82 2.87 2.92 3.20 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 5” 6” 8” 10” 25 25 25 25 25 25 25 15 10 BULK BULK 5.68 5.89 6.65 7.39 8.15 9.86 12.59 18.48 19.45 50.36 62.95 1/4” 3/8” 1/2” 5/8” 3/4” 1” 50 25 15 9 6 3 5.20 9.80 18.52 31.12 47.96 90.87 Adjustable Swivel Ring, Copperclad 301-1/2 301-3/4 301-1 301-11/4 301-11/2 301-2 Riser Clamp, Black 108 Riser Clamp 108-1 108-11/4 108-11/2 108-2 108-21/2 108-3 108-4 108-5 108-6 108-8 108-10 All Thread Rod 900-1/4 900-3/8 900-1/2 900-5/8 900-3/4 900-1 900 Rod 6/14/11 6.34 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Split Ring Pipe Hangers Split Ring Hangers - Malleable Iron • Galvanized, black or copper clad • 3/8” to 2” - 3/8” rod • 2 1/2” to 4” - 1/2” rod Part Number Size Rod Size Ctn Qty List Price Split Ring Pipe Hanger, Black malleable Split Ring Hangers 202-3/8 202-1/2 202-3/4 202-1 202-11/4 202-11/2 202-2 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2’ 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 50 50 50 50 25 25 25 $ 3.02 3.02 3.14 3.49 4.31 5.34 5.59 50 50 50 50 25 25 25 25 25 25 3.37 3.37 3.60 4.13 4.94 6.92 6.39 14.53 17.44 23.25 50 50 50 50 25 25 25 25 25 25 2.68 2.68 2.73 3.08 3.66 3.78 4.47 14.53 17.44 23.25 Split Ring Pipe Hanger, Galvanized malleable 385-3/8 385-1/2 385-3/4 385-1 385-11/4 385-11/2 385-2 385-21/2 385-3 385-4 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" Split Ring Pipe Hanger, Copper Clad, Malleable 485-3/8 485-1/2 485-3/4 485-1 485-11/4 485-11/2 485-2 485-21/2 485-3 485-4 TM 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 1/2" 1/2" 1/2" www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 6.35 Plastic Pipe Hangers & Accessories Part Number Size Ctn Qty List Price DWV Hanger Plastic Coated DWV Hanger 220-11/2 220-2 220-3 220-4 220-6 1 1/2” 2” 3” 4” 6” 50 50 50 50 25 $ 5.63 5.89 6.56 7.37 19.49 25 2.59 6 6 6 101.79 138.48 158.62 100 100 100 100 100 1.66 1.74 1.76 4.56 2.04 50 100 100 100 100 50 50 4.03 3.35 4.91 3.37 4.02 14.73 18.86 100 100 2.79 3.49 DWV Extension Bar DWV Extension Bar 221-3 16 gauge x 3’ Stop Keys 413-6 413-8 413-10 Stop Keys Flanges C Clamps 6’ 8’ 10’ Ceiling Flanges 208-3/8BT 389-1/4PT 389-3/8BT 389-1/2BT 489-3/8BT 3/8” bolt thread, malleable iron 1/4” pipe thread, galvanized 3/8” bolt thread, galvanized 1/2” bolt thread, galvanized 3/8” bolt thread, copper clad C Clamps For Pipe Sizes Fits Rods Size 1/2" - 2" 2 1/2" - 3 1/2" 1/2" - 2" 2 1/2" - 3 1/2" 4" - 5" 6" 1/4” without locknut 3/8” without locknut 1/2” without locknut 3/8” with locknut 1/2” with locknut 5/8” with locknut 3/4” with locknut 122-1/4 122-3/8 122-1/2 123-3/8 123-1/2 123-5/8 123-3/4 Top Beam Clamp , 3/4” Standard Opening 125-3/8 125-1/2 3/8” rod 1/2”rod Top Beam Clamp 6/14/11 6.36 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Stud Protectors 918, 919, 916 and 913 FHA Plates • 1 1/2” width and 3” width in 18 gauge • 18, 16 and 13 gauge 530 Stud Guards 918/916/913 FHA Plates • Triangle points • 1 1/2” width • 18 gauge 531 Stud Guards • Triangle points • 1 1/2” width • 20 gauge 920 Stud Guards 530 & 531 Stud Guards • Twist points • 1 1/2” width • 19 gauge 922 Stud Guards • Interlocking • 1 1/2” width • 20 gauge 920 Stud Guards Part Number Size and Gauge Ctn Qty List Price FHA Plates 918-11/2X9 918-11/2X12 918-11/2X18 916-11/2X9 916-11/2X12 916-11/2X18 913-11/2X9 913-11/2X12 913-11/2X18 919-3X9 919-3X12 919-3X18 922 Stud Guards 1 1/2” X 9”, 18 gauge 1 1/2” X 12”, 18 gauge 1 1/2” X 18”, 18 gauge 1 1/2” X 9”, 16 gauge 1 1/2” X 12”, 16 gauge 1 1/2” X 18”, 16 gauge 1 1/2” X 9”, 13 gauge 1 1/2” X 12”, 13 gauge 1 1/2” X 18”, 13 gauge 3” X 9”, 18 gauge 3” X 12”, 18 gauge 3” X 18”, 18 gauge 50 50 50 50 50 50 50 25 25 50 50 50 $ 0.90 1.13 1.71 1.11 1.56 2.32 1.47 2.19 3.28 1.59 2.12 3.21 530-11/2X3 530-11/2x5 530-11/2X6 1 1/2” X 3”, 18 gauge 1 1/2” x 5”, 18 gauge 1 1/2” X 6”, 18 gauge 100 100 100 0.28 0.42 0.46 531-11/2X3 531-11/2x5 531-11/2X6 920-11/2X3 920-11/2X6 922-11/2X3 922-11/2X6 1 1/2” X 3”, 20 gauge 1 1/2” x 5”, 20 gauge 1 1/2” X 6”, 20 gauge 1 1/2” x 3”, 19 gauge 1 1/2” X 6”, 19 gauge 1 1/2” x 3”, 20 gauge 1 1/2” X 6”, 20 gauge 100 100 100 100 100 100 100 0.23 0.37 0.39 0.24 0.41 0.21 0.42 Stud Guards TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 6.39 4/2009 6.40 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Hand Cleaner Towels SCRUBS® WATERLESS HAND CLEANING TOWELS So unique they needed a patent! Powerful yet safe cleaning agents work together with an absorbent, non scratching abra- Scrubs® is registered sive hand cleaning towel. The result is hands that are clean by Dymon Inc. and protected, with a pleasant fragrance...and are residue free. These shop size, durable towels quickly remove tough to clean substances including: Dirt, Heavy Grease, Adhesives, Lubricants, Oils, Ink, Tar, Wax, Caulk, Sealants, Paint and more. Features: • Pre-moistened, heavy duty towel with pumice scrubbing power. • Works fast to loosen, dissolve and absorb dirt & grease. • Deep cleaning scrubbers remove embedded grime easily. • Conditions and softens hands... No rinsing. No drying. No residue. Part Number Description SCRB72 42293 Scrubs 72 Count Bucket Scrubs Attachable Bracket Ctn Qty 6 1 List Price $ 35.62 24.23 PERMATEX FAST ORANGE® HAND CLEANER WIPES Fast Orange Hand Cleaner Wipes remove the toughest grease, tar, grime, ink, paints, sealants, adhesives and other difficult soils. Each pre-moistened wipe has a textured surface on one side that is ideal for cleaning heavy-duty soils from hands, tools and work areas. The wipes also have a smooth side for general purpose cleaning. Suggested applications: Fields service trucks, industrial work stations, construction, utility maintenance, transportation, printing, municipal maintenance, marine and warehouse personnel. TM Part Number Description 25072 72 count bucket Ctn Qty 6 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 List Price $ 47.31 5/3/11 7.5 3M™ Spray Adhesive 3M™ BLUE 72 Spray Adhesives • Pressure sensitive repositionable adhesive • Aggressive tack and low soak-in. • Use it for temporarily positioning and holding many fabrics. • Precise spray control with a wide spray pattern. • Ideal for pool liner installation • Manufactured for AGI in an ISO 900 facility. ISO 9002 3M™ ORANGE FOAM FAST 74 Spray Adhesives • 74 Foam Fast Adhesive gives fast tack with foam-tearing strength and a soft, nondimpling glue line. • Bonds foam to foam, foam to metal. • Non-misting, precise spray pattern. • Not for sale in California. Does not meet Aerosol Consumer Products VOC limits. • Manufactured for AGI in an ISO 900 facility. Product 72 74 Bond Type Temp or Permanent Permanent Bonding Time One side-8 hrs Two sides-7 days Spray Width 3-3.5 in One side -not recommended 1-3 in variable Two sides-15 minutes Part Number BLUE 72 ORANGE74 Spray Color Temperature Pattern Resistance Controlled Blue 120°F Lace 48°C Lace Light Orange 120°F 48°C Can Size Blue Spray Adhesive 24 fl oz. can 17.33 oz. net Orange spray adhesive 24 fl oz. can 17.33 oz. net Ctn/Pallet Qty Coverage 100 sq ft. 9.3 m2 260 sq ft. 25 m2 List Price 12/768 $ 35.70 12/768 43.33 Pallet pricing available. Call your Sales Representative. 4/30/11 7.6 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Concrete Repair Horizontal Concrete Repair Features: Hardens in as little at 5 minutes, Cracks and spalls in concrete floors are an eyesore as well as a potential safety risk. Fixing them has meant either hiring and waiting for an outside contractor or doing it youself with a repair method that takes the floor out of service for up to 24 hours. Now with 3M Concrete Repair, you save money and time. • Self-leveling urethane flows smoothly into cleaned cracks and gaps and hardens in as little as 5 minutes. A fork lift can pass over a repair in as few as 15 minutes. • Hardens to any depth without cracking or shrinking. • Flexible urethane expands and contracts for durability that outlasts repairs made with concrete. • Do it yourself with a common caulking gun and eliminate the cost and wait for an outside contractor. • Easy to use - Just clean damaged area and fill. With every squeeze of the caulking gun trigger, cartridge nozzle meters and mixes precise proportions for optimum performance. Part Number Description DP600 Concrete Repair, 8.4 fl oz cartridge supplied with 2 nozzles Ctn Qty List Price 6 $ 111.72 Ctn Qty List Price 9” Ratchet Style Caulking Gun DP600 TM Part Number Size CG9 9” Ratchet Color Blue 20 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 4.39 4/30/11 7.7 Concrete Repair Horizontal Concrete Repair Specifications: • • • • • Gray, self-leveling urethane concrete repair. 8.4 fl oz. cartridge of concrete repair and 2 nozzles. Work life of 70 sec. Handling time of 5 minutes Cure time of 60 minutes Applications: • Repairing cracks and spalls on concrete floors or horizontal surfaces. • Setting anchors in concrete floors or horizontal surfaces. • Light-duty custom threading and anchoring. • Use outdoors or in highly ventilated area. Approximate coverage: Crack Crack Lineat Feet per Width Depth 8.4 fl. oz. 1/4” 1/4” 19.3 1/2” 1/4” 9.9 3/4” 1/4” 6.4 1” 1/4” 4.9 1/4” 1/2” 9.9 1/2” 1/2” 4.9 3/4” 1/2” 3.0 1” 1/2” 2.0 Bead Size dimension 1/16” 1/8” 1/4” 3/8” 1/2” Linear Feet per 8.4 fl oz. 815.0 205.0 51.9 22.2 12.4 Quick and Easy Spall Repair Clean Remove all loose material from area to be filled. Concrete should be dry and grease-free. 4/2009 7.8 TM Fill Dispense product into deepest part of repair areas, slightly overfilling. Product self-levels and is tack-free in as little as one minute. Finish In as little as 15 minutes, product can be sanded to remove rough edges. It can be painted within one hour. www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Tapes - Teflon® Thread Seal Imported Teflon® Thread Seal Tape Features: • Medium density thread seal tape requires fewer wraps. • Manufactured from 100% virgin PTFE. • 3.5 mil thick. • Mil. Spec. T-27730A. • Telfon® is a Dupont registered trademark • Meets ASTM D-3308. Part Number HTST260-1/2 HTST260-3/4 HTST260-1 HTST520-1/2 HTST520-3/4 HTST520-1 HTST Series Width 1/2” 3/4” 1” 1/2” 3/4” 1” Length 260 inches 260 inches 260 inches 520 inches 520 inches 520 inches Color White White White White White White Ctn/Case Qty 144/576 144/576 144/576 144/576 144/576 144/576 List Price $ 0.86 1.25 1.44 1.29 1.53 1.72 Made in USA Teflon® Thread Seal Tape Features: • UL Listed. • 100% virgin PTFE. HTT260/HTT520 Medium Density Teflon® Tape • White general purpose • Medium density. HTT260-1/2SS Gray Stainless Steel Teflon® Tape • Nickel pigment added for use on all stainless steel threads. • Prevents galling, seizing and corrosion. • High density for course SS threads. HTT260-1/2PP Pink Plumbers Teflon® Tape • For plumbers and pipe fitters. • Pink to signify heavier than standard or medium density. HTT260-1/2GAS Yellow Gas Service Teflon® Tape • For gas lines of all types- Natural gas, butane, propane. HTT260-1/2OXY Green Oxygen Teflon® Tape • Green for oxygen applications. Grease free. • For all oxygen lines. Will not support combustion. HTT260-1/2XHD White Extra High Density Teflon® Tape • For all industrial applications. • Can be used for water, oil, chemical, medical or food processing. HTT Series Part Number HTT260 HTT520 HTT260-1/2OXY HTT260-1/2PP HTT260-1/2XHD HTT260-1/2SS HTT260-1/2GAS • Telfon® is a Dupont registered trademark Color Usage Thickness Density Temp Range Specs White White Green Pink White Light Gray Yellow General General Oxygen lines Plumbing Industrial Stainless Steel Gas lines 3.5 mil 3.5 mil 3.5 mil 3.5 mil 3.5 mil 3.5 mil 3.5 mil .90 .90 1.55 1.55 1.20 1.55 1.20 -450°F to +550°F -450°F to +550°F -450°F to +550°F -450°F to +550°F -450°F to +550°F -450°F to +550°F -450°F to +550°F Mil T-27730A Mil T-27730A Mil T-27730A/AA58092 Mil T-27730A/AA Mil T-27730A Mil T-27730A/AA58092 Mil T-27730A Part Number HTT260 HTT520 HTT520-3/4 HTT520-1 HTT260-1/2OXY HTT260-1/2PP HTT260-1/2XHD HTT260-1/2SS HTT260-1/2GAS TM Width Length Color Case Qty 1/2” 1/2” 3/4” 1” 1/2” 1/2” 1/2” 1/2” 1/2” 260 in 520 in 520 in 520 in 260 in 260 in 260 in 260 in 260 in White White White White Green Pink White Light Gray Yellow 144 144 144 144 144 144 144 144 144 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 List Price $ 1.80 2.68 4.22 5.45 4.50 4.50 3.86 4.50 3.86 5/3/11 7.1 Tapes - Electrical, Vinyl General Purpose Vinyl Electrical Tape Features: • • • • • • T Series Economical, flexible, general purpose electrical tape. Use for insulation, protective jacketing and harnessing. 7 mil thickness. Temperature Range 32ºF and 176ºF. Meets mil spec. MIL-I-7798A. Imported Part Number Thickness T60 7 mil WidthxLength Color 3/4” x 60 feet Black Ctn Qty 64 List Price $ 1.97 Premium All Weather Vinyl Electrical and Pipe Wrap Tape Features: • • • • • • • For use in all weather applications. Use for insulation, protective jacketing and harnessing and pipe wrap. 7 mil thickness, 3/4” or 2” width. Temperature range 14°F and 176°F. Meets Mil. Spec. MIL-1-7798A. Tested to ASTM D-1000 Imported AWT Series Part Number Thickness WidthxLength Color Ctn Qty AWT60 AWT60-2 7 mil 7 mil 3/4” x 60 feet 2” x 60 feet Black Black 64 48 List Price $ 2.22 5.64 3M® 1700 Temflex™ Vinyl Electrical Tape Features: • • • • • • 1700 Economical, flexible, general purpose electrical tape. Use for protective jacketing and harnessing. 7 mil thickness. Temperature rating to 176°F, 80°C. Meets ASTM D-2301 Type 1. Imported Part Number Thickness WidthxLength Color Ctn Qty 1700 7 mil 3/4” x 60 feet Black 100 List Price $ 3.08 LISTED LR48769 539H Insulating Tape 3M® Scotch® Professional Use Premium Vinyl Plastic Tape Features: TS Series ISO 900 X • Scotch® is a 3M registered trademark 6/14/11 7.2 • • • • • • • • Highly comformable, super stretchy in all weather applications. Resists UV rays, abrasion, corrosion, alkalies and acids. Flame Retardent. 7 mil tape thickness Super 33+. 8.5 mil thickness Super 88 Temperature range 0°F to 220°F. Use as a primary insulation for wire cable splices up to 600V. Use as protective jacketing. Made in USA. Made for AGI in a ISO 900X facility. Part Number Thickness TS33-20 TS33-44 TS33-66 TS88-66 7 mil 7 mil 7 mil 8.5 mil TM Super 33+ ASTM D-3005 Type I UL273 & CSA LR48769 Super 88 MIL-I-24391C ASTM D-3005 Type I UL 539H & CSA LR48769 WidthxLength Color Ctn Qty List Price 3/4” x 20 feet 3/4” x 44 feet 3/4” x 66 feet 3/4” x 66 feet Black Black Black Black 10/100 10/100 10/100 10/100 $ 6.18 11.20 14.18 17.71 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Boss® 136 Firestop/Draft Sealant BOSS® 136 Firestop/Draft Sealant is a single component fire rated sealant and is a noncombustible filler caulking used for firestopping applications in the annular space around wires, pipes, ducts, vents, cable lines and other penetrations to the building envelope. It is a non-slumping sealant that sets to form a hard surface. BOSS® 136 can be applied to any gap or penetration where the specification is noncombustible and/or ASTM-E136 rated. BOSS® 136 is to be used for interior applications only. The noncombustible specification is common to one and two family construction and to nonrated penetrations in multifamily and commercial construction. BOSS® 136 is colored red for ease of inspection. In the event of a fire BOSS® 136 will prevent the spread of fire, smoke and toxic gases through penetration openings. BOSS® 136 serves to form a “gasket or seal against air infiltration” as required by the Model Energy Code in both performance and prescriptive versions. REQUIRED AREAS OF USAGE FOR FIRESTOPPING* Seal ALL areas of penetration as shown in the illustration below. • ALL - Exterior wall studs (including horizontal penetrations.) • ALL - Floor penetrations. • ALL - Ceiling penetrations. • ALL - Framing around chimneys (at ceiling and floor levels.) * Always consult local buliding codes. FEATURES: • Completely non-toxic and contains no asbestos or PCB’s. • Noncombustible. • Applied with a conventional caulking gun. • Easily applied sealant with water cleanup capabilities. • An accredited fire block/smoke seal caulk. • Single component system, no mixing necessary and no additions required. • Meets residential construction code approvals including I.R.C. • For interior applications only. • Available in traditional cartridge and NEW aerosol can. • Excellent adhesion to a wide variety of substrate material. APPLICABLE STANDARDS • UBC Page 1-378, 1997 edition. • CABO Section 602.7, Item 4 of the 1995 edition. • BOCA (NBC) regulation 704.4.1.1 1996. • ASTM E-136. TM Part Number Description BOSS136 10.1 oz cartridge Ctn Qty 12 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 List Price $ 11.28 6/14/11 7.9 Boss® 136 Firestop/Draft Sealant HOW TO USE SPECIFICATIONS • Cut nozzle to desired bead size. Insert cartridge into standard caulking gun. • For a smooth seal, hold at 45°angle and apply by pushing sealant ahead of nozzle. • Apply at 40°F or above. • To ensure good adhesion, all surfaces should be clean and free of dust, oil, loose materials or any other substances. • Make sure that BOSS® 136 makes complete contact with the entire surface of the opening and also the surface of the penetrating item. Always follow cartridge directions. Clean the area to be treated so that it is free of all particles and debris. For large openings, mineral wool fibers can be used as a backer to help hold the product in place until cured. Steel screen wire can be stapled in place over the material when a large opening is overhead or configured such that the material will not support it’s own weight during cure. Meets or exceeds ASTM E-136 for noncombustible building materials. Conforms to BOCA National Building Code (1996), CABO one and two family dwelling code (1995), Uniform Building Code (1997), Section 796, Fire Block and Draft Stop. BOCA-SBCCI-ICBO-NFPA Building Codes. Consult you local code official for the proper use of product. CLASSIFIED NONCOMBUSTIBLE BUILDING MATERIALS IN ACCORDANCE WITH ASTM E-136 <9NA6> ALSO CLASSIFIED IN ACCORDANCE WITH ASTM E 136-96a, “Standard test method for the behavior of materials in a vertical tube furnace at 750°C.” TEMPERATURE RANGE BOSS® 136 freezes in the cartridge at temperatures below 32° F. The product can be warmed and applied at any temperature but will not cure below 40° F. Freeze thaw cycles do not alter the cured product. Cure time may exceed 72 hours at non-freezing temperature. CAUTION • Keep from freezing • Do not take internally • Keep out of reach of children. CONTAINS • Sodium Silicate CAS# 1344-09-8. COLOR Boss® 136 Fire/Smoke and Draft Sealant is red in color for ease of inspection. PACKAGING Boss® 136 Firestop/Draft Sealant is available in standard 10.1 fl. oz cartridges and 11.0 oz. net wt. aerosol cans. STORAGE & SHELF LIFE Boss® 136 should not be stored where the ambient temperatures exceed 120°F or below 35°F. Should freezing occur, insure that product is defrosted fully prior to use. Shelf life is 12 months from the date of shipment. Ensure stock is 4/2009 7.10 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 BOSS® Expanding Foam Sealant BOSS® 333 Expanding Foam Sealant Features: • Easy to use, multi-purpose urethane foam. • Unlike ordinary sealants, it expands three times it’s original volume. • Adheres to all building materials except Teflon®, silicone and polyethelene. • Seals by expanding into gaps, cracks and crevices. • Uses including insulating, sealing and filling gaps around pipes, plumbing fixtures,ductwork and foundations. • UL classified. DIRECTIONS FOR USE: 1. Shake can before and during use. 2. Surface must be clean and free of grease and oil. 3. Can must be held UPSIDE DOWN during application. 4. Insert straw into void and depress the trigger. The use of protective gloves is highly recommended. 5. Fill void 50% full to allow for expansion. 6. Uncured foam can be cleaned with acetone or paint thinner. 7. Cured foam can be trimmed, sanded, painted r stained. Foam MUST be painted or coverred if application is exposed to UV light. R19028 CAULKING AND SEALANTS SURFACE BURNING CHARACTERISTICS APPLIED TO INORGANIC REINFORCED CEMENT BOARD* FLAME SPREAD: 5 SMOKE DEVELOPED: 20 38FN * Tested as applied in three 3/4” beads 5” on center covering 12.5% of the exposed test sample area. Part Number Description Ctn Qty 33316B * 33324B * Expanding Foam Sealant, 12 oz can w/ application tip 12 Expanding Foam Sealant, 24 oz can w/ application tip 12 List Price $ 14.55 28.47 * SHIPPING NOTE: Ground shipping only. Can NOT be shipped via air. TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 7.11 BOSS® Adhesives, Lubricants & Sealants BOSS® line of adhesives, grouts and lubricants are specifically formulated for use with pools and whirlpool baths. BOSS® 801 Neutral Cure Silicone Adhesive Features: • A one part, low odor, non-corrosive, oxime cure adhesive and sealant. • Provides excellant adhesion to ceramic tile, spa jets, skimmers, lighting fixtures, plumbing and fiber optic lighting. • Adheres well to fiberglass, ABS, acrylic, PVC, wood and masonry. BOSS® 802 Acetoxy Cure Silicone General Purpose Adhesive Features: • A one part, acetoxy cure, adhesive/sealant. • Performs well in jet sealing applications. • Designed for many other pool and spa maintenance and repair needs. BOSS® 803 Neutral Cure Silicone Adhesive/Grout Features: • A one part, low odor, non-corrosive, oxime cure silicone grout. • Formulated for use in repairing tile installations. • Adheres well to fiberglass, ABS, acrylic, PVC, wood and masonry. BOSS® 804 Neutral Cure Silicone Ceramic Tile Grout Features: • A one part, low odor, non-corrosive, oxime cure silicone grout. • Spreads easily and provides ample tooling time. • Excellent ahdesion to all ceramic tiles BOSS® 820 Pool & Spa Silicone Lubricant Features: • Water washout resistant and non-solidifying compound. • Provides superb lubricant for rubber o-rings. • Non-corrosive, silicone lubricant compound. 6/14/11 7.12 Part Number Description 80100B 80101B 80200B 80201B Silicone Adhesive Clear, 10.3 oz cart Silicone Adhesive White, 10.3 oz cart Silicone Adhesive Gen Purpose, Clear 10.3 oz. cart Silicone Adhesive Gen Purpose, White 10.3 oz cart 12 12 12 12 $ 15.31 15.31 9.37 9.37 80331B 80401B Silicone Adhesive Grout, Clear 3 oz. tube Silicone Ceramic Tile Grout, White 10.3 oz cart 12 12 7.65 15.31 82001B 82002B 82030B 82000B Pool & Spa Lubricant Clear, 1 oz tube bulk Pool & Spa Lubricant Clear, 1 oz tube 36 pc tub Pool & Spa Lubricant Clear, 3 oz tube Pool & Spa Lubricant Clear, 5.3 oz tube 288 36 12 12 5.18 249.90 7.88 13.21 TM Ctn Qty List Price www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Dow Corning® General Purpose Silicone Sealant Dow Corning ® General Purpose Silicone Sealant Features: • Cures to 100% silicone rubber. • One part, ready to use. Fast cure, high strength. • Resistant to sunlight & weather extremes. • Remains flexible; will not become brittle, crack or tear. • Removable, reusable, resealable nozzle. • Meets the requirements of FDA Regulation No. 21CFR177.2600. PLB 90 Series Dow Corning General Purpose Silicone Sealant is a one-part acetoxy cure silicone sealant for general purpose applications. Provides a flexible bond and will not harden or crack. Trademate General Purpose Silicone Sealant is a high performance sealant, with +/- 25% movement capability when properly applied. It can be used as a bedding material, formed-in-place gaskets and bumpers. Adhere trim, name plates, signs. Seal around sinks, faucets, showers, tubs, toilets and vents. It can be used for most marine applications. Seal between hull and deck, most boat decks, windows, port lights, windshields and hatches. Storage: Product Properties: Tooling Time * . . . . . . . . . . . . . . . . . . . . . . . . . .5-10 minutes Tack Free Time * . . . . . . . . . . . . . . . . . . . . . . . .15-20 minutes Complete Set-up time * . . . . . . . . . . . . . . . . . . .24 hours (1/8”) Cure System . . . . . . . . . . . . . . . . . . . . . . . . . . . .Acetoxy Application Temperture Range . . . . . . . . . . . . .-20°F to 122°F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-29°C to 50°C As Cured (after 7 days) Durometer hardness Shore A . . . . . . . . .27 points Tensile Strength . . . . . . . . . . . . . . . . . . . .350 psi Elongation . . . . . . . . . . . . . . . . . . . . . . . . .600 % Temperture Range - continuous . . . . . . .-40°F to 350°F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to 176°C Movement capability . . . . . . . . . . . . . . . . . . . . .+/- 25% * At 77°F (25°C) and 50% relative humidity Approval/Specifications: • ASTM C920 Type S, Grade NS, Class 25, Use NT, G and A. • Federal Specification TT-S-001543A, Type non-sag, Class A, • Federal Specificaiton TT-S-00230C, Type II, Class A • Store below 90° F (32°C) in a dry place. • To store short term, replace cap. • To store long term, unscrew nozzle, screw cap in cartridge and store nozzle in cap. Limitations: • Not for structural glazing • Not paintable • Not suited for prolonged submersion in water or belowgrade applications. • May not adhere to oily woods or be compatible with substrates made of methylmethacrylate, polycarbonate, polypropylene, polyethylene and polytetrafluroethylene. • Not suitable for surfaces that might bleed oils, plasticizers or solvents or porous surfaces such as cement-like materials, stone or surfaces prone to attack by weak acids. • May not cure properly if used in spaces confined from atmospheric moisture. • May cause corrosion on some brass, copper, zinc or zinc-alloy containing fixtures (galvanized). • This product is neither tested nor represented as suitable for medical or pharmaceutical uses. • Not for use where abrasion and physical abuse are encountered. Part Number Size PLB90C PLB90W CG9 10.3 oz. cartridge 10.3 oz. cartridge 9” Ratchet Color Clear White Blue Ctn Qty 12 12 20 List Price $ 9.90 9.90 4.39 9” Ratchet Style Caulking Gun TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 2/15/11 7.13 Dow Corning® Tub, Tile & Ceramic Silicone Sealant Dow Corning® Tub, Tile & Ceramic Silicone Sealant Features: • Cures to 100% silicone rubber. • One part, ready to use. Fast cure, high strength. • Cured silicone is mildew resistant • Remains flexible; will not become brittle, crack or tear. • Removable, reusable, resealable nozzle. • Clear & almond colors meet the requirements of FDA Regulation No. 21CFR177.2600. Dow Corning Tub, Tile & Ceramic Silicone Sealant is a one-part acetoxy cure silicone sealant for non-porous surface applications requiring a mildew-resistant sealant. This versatile material can be used as an adhesive, selant, or grout for repairing or replacing ceramic tiles as well as in many other plumbing applications. It can be used for tub and shower enclosures. It can be used to form watertight seals around bathtubs, shower enclosures, sink vanities, countertops, lavatories, faucets, saunas, hot tubs, plumbing fixtures, drains, piping, shower doors and floor seams. PLB 100 Series Storage: Product Properties: Tooling Time * . . . . . . . . . . . . . . . . . . . . . . . . . .5-10 minutes Tack Free Time * . . . . . . . . . . . . . . . . . . . . . . . .15-20 minutes Complete Set-up time * . . . . . . . . . . . . . . . . . . .24 hours (1/8”) Cure System . . . . . . . . . . . . . . . . . . . . . . . . . . . .Acetoxy Application Temperture Range . . . . . . . . . . . . .-20°F to 122°F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-29°C to 50°C As Cured (after 7 days) Durometer hardness Shore A . . . . . . . . .27 points Tensile Strength . . . . . . . . . . . . . . . . . . . .325 psi Elongation . . . . . . . . . . . . . . . . . . . . . . . . .600 % Temperture Range - continuous . . . . . . .-40°F to 350°F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to 176°C Movement capability . . . . . . . . . . . . . . . . . . . . .+/- 25% * At 77°F (25°C) and 50% relative humidity Approval/Specifications: • ASTM C920 Type S, Grade NS, Class 25, Use NT, G and A. • Federal Specification TT-S-001543A, Type non-sag, Class A, • Federal Specificaiton TT-S-00230C, Type II, Class A 9” Ratchet Style Caulking Gun 6/14/11 7.14 • Store below 90° F (32°C) in a dry place. • To store short term, replace cap. • To store long term, unscrew nozzle, screw cap in cartridge and store nozzle in cap. Limitations: • Not for structural glazing • Not paintable • Not suited for prolonged submersion in water or belowgrade applications. Not for aquarium use as product contains a fungicide. • May not adhere to oily woods or be compatible with substrates made of methylmethacrylate, polycarbonate, polypropylene, polyethylene and polytetrafluroethylene. • Not suitable for surfaces that might bleed oils, plasticizers or solvents or porous surfaces such as cement-like materials, stone or surfaces prone to attack by weak acids. • May not cure properly if used in spaces confined from atmospheric moisture. • May cause corrosion on some brass, copper, zinc or zincalloy, containing fixtures (galvanized). • This product is neither tested nor represented as suitable for medical or pharmaceutical uses. • Not for use where abrasion and physical abuse are encountered. Part Number Size PLB103C PLB103W PLB100C PLB100W CG9 3 oz tube 3 oz tube 10.3 oz cartridge 10.3 oz cartridge 9” Ratchet TM Color Clear White Clear White Blue Ctn Qty 12 12 12 12 20 List Price $ 7.17 7.17 11.00 11.00 4.39 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 PVC Solvent Cements PVC REGULAR CLEAR CEMENTS 2200 Series CLEAR • Regular bodied, clear cement for use on PVC pipe and fittings. Up to 4” for DWV Sch 40 and up to 2” for Sch 80. • Recommended for ALL grades and types of PVC pipe and fittings, potable water and DWV. • Sets up quickly. • Recommended application temperature 40°F to 110°F. • Meets ASTM D-2564. • Meets California Air Quality Management District and other environmental disctict rules. PVC REGULAR CLEAR ADVANCED CEMENTS 2800 Series CLEAR Size 2266S 2256S 2246S 2236S 2224 4 oz. 8 oz. 16 oz. 32 oz. 1 gallon Case Qty 24 24 24 12 6 List Price $ 7.59 11.48 19.30 33.23 118.41 Part Number Size 2866S 2856S 2846S 2836S 2824 4 oz. 8 oz. 16 oz. 32 oz. 1 gallon Case Qty 24 24 24 12 6 List Price $ 6.54 10.98 19.15 33.80 118.86 LO-VOC • Medium bodied, clear cement for use on PVC pipe and fittings. Up to 6” for Sch 40 and Sch 80. • Recommended for ALL grades and types of PVC pipe and fittings, drain, waste and vent pipe, and potable water • Recommended application temperature 40°F to 110°F. • Meets ASTM D-2564. • Meets California Air Quality Management District and other environmental disctict rules. TM Part Number LO-VOC • Regular bodied, clear cement for use on PVC pipe and fittings. Up to 4” for DWV Sch 40 and up to 2” for Sch 80. • Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. • Sets up quickly. • Recommended application temperature 40°F to 100°F. • Meets ASTM D-2564. • Meets California Air Quality Management District and other environmental disctict rules. PVC MEDIUM CLEAR CEMENTS 1200 Series CLEAR LO-VOC Part Number Size 1266S 1256S 1246S 1236S 1224 4 oz. 8 oz. 16 oz. 32 oz. 1 gallon Case Qty 24 24 24 12 6 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 List Price $ 7.97 12.37 21.62 30.13 128.18 6/14/11 7.17 PVC Solvent Cements PVC MEDIUM GRAY CEMENTS 1600 Series GRAY LO-VOC • Medium bodied, gray colored cement for use on PVC pipe and fittings. Up to 6” for Sch 40 and Sch 80. • Recommended for ALL grades and types of PVC pipe and fittings, potable water and DWV. • Recommended application temperature 40°F to 110°F. • Meets ASTM D-2564. • Meets California Air Quality Management District and other environmental disctict rules. PVC MEDIUM “HOT” BLUE CEMENTS 2000 Series BLUE 6/14/11 7.18 LO-VOC • Medium bodied, blue colored cement for PVC pipe and fittings. Up to 6” for Sch 40 and Sch 80. • Very fast setting cement formulated for wet conditions and/or quick pressurization and fast installation. • Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe and DWV. • Blue color fades to clear in direct sunlight. • No primer needed on non-pressure DWV, where local codes permit. • Recommended application temperature 40°F to 110°F. • Meets ASTM D-2564. • Meets California Air Quality Management District and other environmental disctict rules. TM Part Number Size 1666S 1656S 1646S 1636S 1624 4 oz. 8 oz. 16 oz. 32 oz. 1 gallon Case Qty 24 24 24 12 6 List Price $ 8.13 12.46 20.34 36.45 131.11 PLUMB-TITE™ Part Number Size 2066S 2056S 2046S 2036S 2024 4 oz. 8 oz. 16 oz. 32 oz. 1 gallon Case Qty 24 24 24 12 6 List Price $ 8.89 13.88 24.53 13.88 170.33 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 PVC Solvent Cements PVC ALL WEATHER CEMENTS 2600 Series CLEAR LO-VOC • Medium bodied, clear cement for PVC pipe and fittings. Up to 6” for Sch 40 and Sch 80. • Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe and DWV. • Non-pressure DWV, up through 4” diameter: No primer needed, where local codes permit. • Formulated for fast initial set-up at temperatures down to -5°F to 110°F. • Meets ASTM D-2564. • Meets California Air Quality Management District and other environmental disctict rules. PVC MEDIUM RAIN-R-SHINE® BLUE CEMENTS 308 Series BLUE POLAR-WELD Size 2666S 2656S 2646S 2636S 2624 4 oz. 8 oz. 16 oz. 32 oz. 1 gallon Case Qty 24 24 24 12 6 List Price $ 10.66 12.81 29.80 48.67 174.97 LO-VOC • Medium bodied, blue colored cement for PVC pipe and fittings. Up to 6” for Sch 40 and Sch 80. • Very fast setting cement formulated for wet conditions and/or quick pressurization and fast installation. • Recommended for ALL grades and types of PVC pipe and fittings, potable water and DWV. • Pool/Irrigation installations. • No primer needed on non-pressure DWV, where local codes permit. • Recommended application temperature 40°F to 110°F. • Meets ASTM D-2564. • Meets California Air Quality Management District and other environmental disctict rules. TM Part Number Part Number Size 30890 30891 30893 30894 30895 4 oz. 8 oz. 16 oz. 32 oz. 1 gallon Case Qty www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 24 24 24 12 6 List Price $ 7.77 12.56 18.03 36.37 120.19 6/14/11 7.19 PVC Solvent Cements PVC MEDIUM “HOT” BLUE CEMENTS 2400 Series BLUE LO-VOC • Medium bodied, blue colored cement for PVC pipe and fitting. Up to 6” for Sch 40 and Sch 80. • Very fast setting cement formulated for wet conditions and/or quick pressurization and fast installation. • Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe and DWV. • Irrigation installations. • Fades to clear in sunlight. • No primer needed on non-pressure DWV, where local codes permit. • Recommended application temperature 40°F to 110°F. • Meets ASTM D-2564. • Meets California Air Quality Management District and other environmental disctict rules. PVC MEDIUM “HOT” BLUE CEMENTS 2300 Series BLUE 6/14/11 7.20 LO-VOC • Medium bodied, blue colored cement for PVC pipe and fittings. Up to 6” for Sch 40 and Sch 80. • Very fast setting cement formulated for wet conditions. • Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit, PVC flex pipe and DWV. • Color fades to clear in sunlight. • No primer needed on non-pressure DWV, where local codes permit. • Recommended application temperature 40°F to 100°F. • Works on flex to rigid pipe applications. • Meets ASTM D-2564. • Meets California Air Quality Management District and other environmental disctict rules. TM TURF-TITE Part Number Size 2466S 2456S 2446S 2436S 2424 4 oz. 8 oz. 16 oz. 32 oz. 1 gallon Case Qty 24 24 24 12 6 List Price $ 8.61 13.82 24.07 42.28 158.20 POOL-TITE Part Number Size 2366S 2356S 2346S 2336S 2324 4 oz. 8 oz. 16 oz. 32 oz. 1 gallon Case Qty 24 24 24 12 6 List Price $ 8.33 12.93 19.89 35.53 111.77 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 PVC, CPVC Solvent Cements PVC MEDIUM CLEAR FAST SET CEMENTS 2900 Series CLEAR • Medium bodied, clear cement for PVC pipe and fitting. Up to 6” • Recommended for Sch 40 and Sch 80 pipe and fittings. • Also recommended for PVC flex pipe. • Meets ASTM D-2564. • Meets California Air Quality Management District and other environmental disctict rules. CPVC MEDIUM ORANGE CEMENTS 3200 Series ORANGE Part Number Size 30875 2946S 2936S 2924 4 oz. 16 oz. 32 oz. 1 gallon Part Number Size 3266S 3256S 3246S 3236S 4 oz. 8 oz. 16 oz. 32 oz. Case Qty 24 24 12 6 List Price $ 7.82 28.53 47.79 145.65 Case Qty 24 24 24 12 List Price $ 9.76 15.09 29.43 39.82 LO-VOC 1-STEP YELLOW CEMENTS • Exceeds new environmental requirements and meets various CA district rules. • For copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2” interference fit only. • May be used without primer where local codes permit. • For cold water systems and hot water systems up to 180°F. • Faster cure time/reduced installation time. • Meets ASTM F-493. • Meets California Air Quality Management District and other environmental disctict rules. TM POOL-CLEAR LO-VOC • Medium bodied, orange colored cement for use on CPVC pipe and fittings. Up to 6”. • For copper tube size (CTS) and Sch 80, potable water pressure pipe. • Recommended application temperatures down to 40°F to 110°F. • Meets ASTM F-493. • Meets California Air Quality Management District and other environmental disctict rules. CPVC FLOWGUARD® GOLD™ 319 Series LO-VOC Part Number Size 31910 31911 31912 4 oz. 8 oz. 16 oz. Case Qty 24 24 24 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 List Price $ 10.56 16.88 30.44 6/14/11 7.21 PVC and Multipurpose Solvent Cements PVC HEAVY DUTY CLEAR CEMENTS 1500 Series CLEAR LO-VOC • Heavy bodied, clear cement for PVC pipe and fittings. Up to 18” for Sch 40 and Sch 80. • Recommended for ALL grades and types of PVC pipe and fittings, potable water and DWV. • Thick formula fills gaps in large diameter pipe and loose fitting joints. • Recommended application temperature 40°F to 110°F. • Meets ASTM D-2564. • Meets California Air Quality Management District and other environmental disctict rules. PVC HEAVY DUTY GRAY CEMENTS 1700 Series GRAY 6/14/11 7.22 Size 1566S 1556S 1546S 1536S 1524 4 oz. 8 oz. 16 oz. 32 oz. 1 gallon Case Qty 24 24 24 12 6 List Price $ 6.39 10.04 21.97 35.87 111.13 LO-VOC • Heavy bodied, gray colored cement for use on PVC pipe and fittings. Up to 18” for Sch 40 and Sch 80. • Recommended for ALL grades and types of PVC pipe and fittings, potable water and DWV. • Thick formula fills gaps in large diameter pipe and fitting. • Recommended application temperature 40°F to 110°F. • Meets ASTM D-2564. • Meets California Air Quality Management District and other environmental disctict rules. MULTI PURPOSE REGULAR CLEAR CEMENTS 6200 Series CLEAR Part Number Size 1756S 1746S 1736S 1724 8 oz. 16 oz. 32 oz. 1 gallon Case Qty 24 24 12 6 List Price $ 14.03 25.68 45.12 160.50 LO-VOC • Regular bodied, clear cement for ABS, PVC or CPVC up to 4”. • Recommended for pipe and fittings Sch 40 and Sch 80, potable water, pressure pipe and DWV. • Recommended application temperature 40°F to 110°F. • Meets performance requirements of ASTM D-2564, D-2235, F-493. • Meets California Air Quality Management District and other environmental disctict rules. TM Part Number Part Number Size 6266S 6256S 6246S 6236S 30848 4 oz. 8 oz. 16 oz. 32 oz. 1 gallon Case Qty 24 24 24 12 6 List Price $ 8.80 14.04 19.24 33.26 122.63 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 ABS Solvent Cements ABS MEDIUM BLACK CEMENTS 4400 Series BLACK • Medium bodied, black cement for ABS pipe and fittings. Up to 6”. • For ALL types and grades or ABS pipe and fittings for DWV. • For all non-pressure applications. • Recommended application temperatures 40°F to 110°F. • Meets ASTM D-2235. • Meets California Air Quality Management District and other environmental disctict rules. ABS TO PVC TRANSITION GREEN CEMENTS 309 Series GREEN LO-VOC Size 4466S 4456S 4446S 4436S 4424 4 oz. 8 oz. 16 oz. 32 oz. 1 gallon Case Qty 24 24 24 12 6 List Price $ 8.40 11.84 12.12 35.76 102.52 LO-VOC • Medium bodied, green colored cement for use in joining ABS to PVC in nonpressure transition joints. • All schedules up to 6” pipe fittings. • Recommended application temperature 40°F to 110°F. • Meets ASTM D-3138. • Meets California Air Quality Management District and other environmental disctict rules. TM Part Number Part Number Size 30900 30925 30926 4 oz. 16 oz. 32 oz. Case Qty 24 24 12 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 List Price $ 8.73 22.40 39.70 6/14/11 7.23 Primers CLEAR PRIMER - NSF LISTED 9300 Series CLEAR LO-VOC • A clear aggresive primer for use on PVC and CPVC pipe and fittings. • All schedules and diameters. • Removes all surface dirt, grease and grime as well as softens pipe to allow a fast, secure solvent weld. • Meets ASTM F-656. • Meets California Air Quality Management District and other environmental disctict rules. PURPLE PRIMER - NSF LISTED 8700 Series PURPLE 8000 Series BLUE 6/14/11 7.24 Size 9366S 9356S 9346S 9336S 9324 4 oz. 8 oz. 16 oz. 32 oz. 1 gallon Case Qty 24 24 24 12 6 List Price $ 7.94 11.07 22.75 32.37 116.96 LO-VOC • A purple tinted aggresive primer for use on PVC and CPVC pipe and fittings. • Exceeds new environmental requirements and meets various CA district rules. • For use in areas where plumbing code calls for verification that a primer has been used. • Removes all surface dirt, grease and grime as well as softens pipe to allow a fast, secure solvent weld. BLUE PRIMER - NSF LISTED Part Number LO-VOC Size 8766S 8756S 8746S 8736S 8724 4 oz. 8 oz. 16 oz. 32 oz. 1 gallon Case Qty 24 24 24 12 6 List Price $ 9.01 12.45 21.93 29.73 116.46 PRIME-TITE™ • A blue-tinted aggresive primer for use on PVC and CPVC pipe and fittings. • Blue color fades to clear in direct sunlight. • Formulated to work with “TITE” products. • Meets ASTM F-656. • Meets California Air Quality Management District and other environmental disctict rules. TM Part Number Part Number Size 8056S 8046S 8036S 8 oz. 16 oz. 32 oz. Case Qty 24 24 12 List Price $ 14.17 24.21 43.38 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Primers and Cleaners PURPLE PRIMER/CLEANER 8800 Series PURPLE • Purple tinted all purpose primer/cleaner for PVC and CPVC pipe and fittings. • Removes surface dirt, grease and grime as well as softens pipe to allow a fast, secure solvent weld. • Less aggressive than clear primer and purple primer. • Purple tint for verification for code. • Exceeds new environmental requirements and meets various CA district rules. CLEANER 7300 Series CLEAR LO-VOC Part Number Size 8866S 8856S 8846S 8836S 8824S 4 oz. 8 oz. 16 oz. 32 oz. 1 gallon Part Number Size 7366S 7356S 7346S 7336S 7324 4 oz. 8 oz. 16 oz. 32 oz. 1 gallon Case Qty 24 24 24 12 6 List Price $ 7.79 11.63 22.75 31.70 108.44 LO-VOC • Clear cleaner for ABS, PVC and CPVC pipe and fittings. • All schedules and diameters. • Exceeds new environmental requirements and meets various CA district rules. • Fast-acting cleaner removes surface dirt, grease and grime. •Flows freely and evaporates quickly. Case Qty 24 24 24 12 6 List Price $ 6.80 8.99 15.97 21.26 89.78 DAUBERS and EMPTY CANS • Replacement product daubers. • Reusable cone top metal containers. Part Number Case Qty List Price Fits 32 oz quart can Fits 16 oz pint can Fits 8 oz 1/2 pint can 48 48 24 $ 3.52 2.94 3.32 EMPTY CANS 30901 Gallon 2 7/8” mouth 6 27.73 DAUBERS 31312 31310 31309 TM Size www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 7.25 4/2009 7.26 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Lubricants - Super Lube® Super Lube® is a patented, multi-purpose synthetic lubricant, containing SYNCOLON® (PTFE) particles held in suspension. Super Lube lasts longer and outperforms convential petroleum-based greases and oils. Packaging includes tubes, grease cartridges, aerosols, bottles, pails and drums. How does the chemistry of SuperLube differ from conventional petroleum-based greases and mineral oils? Super Lube grease and oils are exceptionally pure lubricants because they are synthetic. This gives SuperLube very stable and predictable chemical properties. Petroleum-based machine and gear oils are made from refined crude oil and contain impurities which cannot be removed. These impurities interfere with film strength and wear protection. They also form deposits at high temperatures and solidify at low temperatures. Petroleum-based greases are formulated by adding lithium, calcium or sodium thickeners to petroleum-based oil. Super Lube Aerosol A multi-purpose PTFE based synthetic lubricant available in aerosol form. Super Lube aerosol disperses and penetrates while lubricating & loosening rust and dirt. Super Lube aerosol offers continuous protection as it "sets up" and forms a grease film barrier that defends against oxidation. This barrier helps extend the life of equipment and reduces maintenance. Super Lube Non-Aerosol Pump Because of environmental concerns, many industrial facilities do not allow the use of aerosol products. Super Lube Oil with PTFE is available in a one quart trigger spray container to address these needs. 31110 51600 Super Lube ® and SYNCOLON ® are trademarks of SYNCO Chemical Corp. Benefits: • Synthetic with PTFE • Provides more reliable lubrication and outlasts petroleum based greases & oils • Non-toxic, odorless • USDA H--1 for use in federally inspected meat & poultry plants. • Remains free flowing in freezing temperatures • High dielectric strength • Water and saltwater waterproof • Will not stain or harm wood, rubber, leather, plastics, fabric & paint • Won't drip, run or evaporate • 1A copper corrosion • Excellent salt spray performance • Repels dirt, dust, grit and grime • Prevents rust and corrosion while reducing friction • Reduces maintenance for longer machinery life Part Number (old) Description 31040 (23755) 31110 (20029) 51600 (24575) 6 oz. aerosol 11 oz. aerosol 32 oz. non-aerosol trigger spray TM Applications: • Plain & anti-friction bearings • Ball & roller bearings • Wheel bearings • Chassis points • Fifth wheels • Electric motor bearings • Disc brake assemblies • Pumps • Blowers • Cams • Slides • Conveyors • Chains • Water pumps • Valves • Open gears Case Qty List Price 12 12 12 $ 12.04 14.87 35.65 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 8.5 Lubricants - Super Lube® Super Lube Dri Lube (Dri-Film) Super Lube Dri-Lube is a self-cleaning lubricant that actually cleans while lubricating. Super Lube Dri-Lube leaves behind a protective shield lubricant that will not attract dust. The dry coating provides a low coefficient of friction which gives excellent lubrication and release properties. Dri-Lube can be used on wood, metal and most plastics not under stress and has excellent thermal and chemical stability, forming a natural insulating barrier when used on electronics. 11016 Benefits: • Clean, non-staining • For uses from -40°F to +500°F • Non-conducting • Easy to use • Resists acid attacks • Dries on contact • Effective mold release agent • Not affected by oil, water or solvents • Long lasting lubrication • Cleans while lubricating • Stops squeaking, sticking • Prevents corrosion Applications: • Industrial slides and glides • High speed machinery • Precision instruments • Door and trunk hinges • Pipe fittings • Electronic & electrical equipment • Chains • Tools • Zippers • Lock cylinders • Rusted nuts and bolts • Cable pivots Part Number Description Case Qty List Price 11016 11 oz. aerosol 12 $ 17.10 Super Lube Oil with PTFE Super Lube Oil with PTFE is a premium synthetic oil with suspended PTFE particles that bond to surfaces to add lubricity to moving parts. Super Lube Oil with PTFE is used for applications which allow parts to be confined (ie. gear box). Use it as a general purpose lubricant for industrial machinery and equipment. Super Lube Oil with PTFE provides long life protection against friction, wear, rust and corrosion. Machinery lasts longer, downtime is reduced, and productivity is increased. Super Lube Oil with PTFE is safe on metal, rubber, plastic, wood, leather, fabric & painted surfaces. 51010 Benefits: Applications: • Waterproof • Plain, anti-friction & roller bearings • Non-toxic (USDA rating H1) • Enclosed industrial gears • Synthetic with PTFE • Enclosed chains • Reduces friction and wear • Gearhead motors • Extends machinery & • Paper machines equipment life • Conveyors • Reduces maintenance • Machine ways • Viscosity stable • Reciprocating compressor • Long-lasting lubricant additive • Machine tools • Centralized systems • Straight, helical, bevel & spiral gears Part Number (old) Description 51010SL (82333) 51040 (82334) 82337 (52040) 7 ml precision oiler 1 gallon Light Weight Oil 1 gallon 6/14/11 TM 8.6 Typical Properties: Color: Translucent white Viscosity tested to ASTM D445 cSt@ 100°F: 14-17 cSt @ 40°F: 118-122 ISO grade: 220 Replaces ISO grade: 150-320 Replaces SAE grade gear oils: 90 Viscosity index: 145 Shelf Life: 24 months Case Qty List Price 12 4 4 $ 7.28 131.60 114.58 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Lubricants - Super Lube® Super Lube Grease Super Lube is a patented synthetic NLGI grade 2 heavy-duty, multi-purpose lubricant with PTFE. Synthetic base fluids and the addition of PTFE micro powders combine to form a premium lubricant that provides long life protection against friction, wear, rust and corrosion. Machinery lasts longer, downtime is reduced, and productivity is increased. Super Lube is a USDA listed Food Grade Lubricant, rated H1 for incidental food contact. Super Lube will not run or drip, does not evaporate or form gummy deposits and will not dry out, melt or separate. Super Lube is a synthetic, heavy duty lubricant that is compatible with most other lubricants. Super Lube Grease outlasts conventional greases 50-100% and has excellent adhesion. 41150 21030 TYPICAL PROPERTIES Color: Translucent white Operating Temperature Range: -45° to 450°F NLGI Grade (ASTM D1092): 2 Dropping point (ASTM D566): >500°F (260C) Four ball test (ASTM D2783): Load wear index: 81.73 kg Weld point: 400 kg Oxidation stability 100 hrs. (ASTM D942): 0 psi Wheel bearing leakage (ASTM D1263): 0.2g Copper corrosion 24 hrs @ 100°C (ASTM D4048): 1B, shiny Shelf life: 24 months Benefits: • Clean • Non-toxic • Non-staining • Dielectric • USDA Rating H1 • Will not drip, run or evaporate • Impervious to salt water, safe in potable water • Long lasting • Prevents rust & corrosion while reducing friction • Compatible with conventional lubricants • Repels dirt, dust, grit & grime • Extends machinery and equipment life • Reduces maintenance while saving time & money • Reduces friction and wear • Will not stain or harm wood, rubber, leather, plastic, fabrics and paint. Super Lube Grease Replaces • Lithium, Bentone, Calcium or Aluminim complex grease • High & low temperature greases • Electric motor grease • Food grade grease • Bearing, wheel bearing grease • Multi-purpose grease • Dielectric grease • Valve sealant • O-ring lubricant Applications: • Plain and anti-friction bearings • Ball and roller bearings • Wheel bearings • Chassis points • Fifth wheels • Electric motor bearings • Disc brake assemblies • Pumps • Blowers • Cams • Slides • Conveyors • Chains • Water pumps • Valves • Open gears • Switch assemblies • Cables • Fans • Electronic equipment • Deep drawing application Part Number (old) Description Case Qty List Price 21010 21030 72350 41160 41050 41030 1/2 oz. tube 3 oz. tube 400 g cartridge 400 g jar 5 lb. pail 30 lb. pail 12 12 12 12 4 1 $ 6.22 10.50 21.97 22.68 119.27 671.36 TM (82324) (82325) (41150) (82329) (82330) (82331) www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 8.7 Lubricants - Super Lube® Super Lube Product Display • 36 pc. assortment with counter display • Contains: 12 #21030 Super Lube Grease w/ PTFE, 3 oz. tubes 12 #31040 Super Lube w/ PTFE 6 oz. aerosol 12 #31110 Super Lube w/ PTFE 11 oz. aerosol 11362 Super Lube Grease w/ PTFE Counter display • Packaged in a cardboard counter display • Contains 40, 1/2 oz. tubes Super Lube w/ PTFE grease Super Lube Precision Oiler w/ PTFE Counter display 21013 and 51013 • Packaged in a cardboard counter display • Contains 48, 7 ml precision oiler pens of Super Lube w/ PTFE Part Number Description 11362 21013 51013 Assorted Counter Display Counter display w/ Grease Counter display w/ Oiler 6/14/11 TM 8.8 Display Qty 36 40 48 List Price $ 513.30 297.55 327.70 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Lubricants - Super Lube® Super Lube Air Tool Lubricant Super Lube Air Tool Lubricant is formulated to meet the special requirements for industrial, household and agricultural tools. It absorbs water and eliminates any ice buildup and frost in air tools. Blended rust and corrosion inhibitors and a special base fluid oil minimizes wear and allows operation of air tools at temperatures as low as -40°F. Applications: • Air impact tools • Drills • Grinders • Screwdrivers • Sanders • Percussion tools • Household shop tools • All air tool oil lubricated Part Number Description 12004 12016 12032 12040 12050 4 oz. bottle 16 oz. bottle 32 oz. bottle 1 gallon 5 gallon Benefits: • Wide temperture range • Works on types of pneumatic equipment • Prevents rust and corrosion • Can be used as a light oil • Gives worn tools new life • Less friction and wear • Protects against corrosives • Less tendancy for bubbles • Absorbs moisture • Eliminates ice buildup and frost in air tools. Case Qty List Price 6 12 12 4 1 $ 8.87 19.25 35.41 122.37 568.31 Super Lube Syncopen Super LubeSynthetic Penetrant is a super fast acting, penetrating, synthetic oil that cuts through rust or corrosion. Syncopen penetrates hard to reach areas to allow easy removal of rusted and corroded screws, nuts or bolts. Syncopen penetrates, lubricates and leaves a protective film to help prevent future rusting or corrosion. Benefits: • Cleans and Penetrates • Loosens rusted parts • Frees sticky mechanisms • Stops squeaks • Protects against rust & corrosion • Drives out moisture • Leaves a protective lubricating film Typical Properties: TEST METHOD Color Specific Gravity Pour Point Salt Spray Test (500 hrs) Copper Corrosion 24 hrs @ 100°C USDA Rating Shelf Life Part Number Description 85011 85032 85010 85050 11 oz. aerosol 32 oz. trigger pump spray bottle 1 gallon 5 gallon TM SYNCOPEN Translucent Brown ASTM D1298 .85 ASTM D97 -40°F ASTM B117 Pass ASTM D130 NSF 1A H1 24 months Case Qty List Price 12 12 4 1 $ 14.08 37.63 122.18 584.24 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 8.9 4/2009 TM 8.10 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Miscellaneous Tools HARVARD CONTRACTOR’S WCS1022 Wire Cutter/Strippers Features: • Combination wire cutter and stripper. • Strips wire sizes 22-10 AWG. • Heavy duty scissor opening spring. • Cushioned plastic grips. • Easy locking thumb lock. HARVARD CONTRACTOR’S WCS1022MU Wire Cutter/Stripper/Crimper Features: WCS1022, WCS1022MU • Compact, high quality multi-use tool designed for perform six most common electrical wiring functions. • Made of heat-treated carbon steel. • Handles a variety of terminal and connector styles-insulated and noninsulated. • Wire range 22-10 AWG. • Anvil-type wire cutter for clean cuts. • Crimp dies for 22-10 AWG non-insulated terminals and connectors. • Wire stripping stations for circumferencial cutless effort. • Crimp die for 7 and 8 mm ignition parts. • Cushioned plastic grips. Part Number Description WCS1022 WCS1022MU Wire Cutter/Stripper Wire Cutter/Stripper/Crimper Ctn Qty List Price 100 72 $ 17.68 17.68 Adjustable Strap Wrench: Part Number For Use with Coupling Sizes Ctn Qty SW400 SW600 1/2” through 4” 1/2” through 6” 60 60 List Price $ 17.68 20.18 SW Series SW500 Nipple Extractor Features: • For 1/2” or 3/4” plastic nipples. • Easy to remove broken plastic riser from sprinkler pipe and fittings. • Insert tip and turn. Part Number Description SW500C Stub Wrench Ctn Qty List Price SW500C TM 25 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6.43 5/3/11 11.9 Plumbing Tools Garbage Disposal Wrench Features: • Fits standard units. HGD10 4-Way Key Features: • For use on square stem 1/4”, 9/32”, 5/16”, 11/32”. Tub and Shower Valve Socket Wrench Set Features: • Set includes sockets, handle and wire. HK400 HW500 Radiator Spud Wrench Features: HR • For use when spud wrench or key is required. • Plated. 4 Way Countersunk Plug Wrench Features: • Steel construction. HP400 Internal Pipe Wrench Features: • Available in sizes 3/8”, 1/2”, 3/4” and 1”. Adjustable Strainer and Spud Wrench Features: HI • Use for Basket Strainers and Closet Spud. • Minimum 1” to Maximum 3”. • Plated. 4-Way P.O. Plug Wrench Features: • Plated. • Use when installing or removing tub drains, P.O. plugs & basket strainers. HAS300 Strainer Wrench HPO400 HS200 • Plated steel. • For use on basket strainers and tub drains with crossbars. •Long handle for leverage. Spanner and Strainer Wrench Features: • Plated, malleable iron. • For use on basket strainer jam nuts. HS500 HK50 6/14/11 11.10 Part Number Description HGD10 HK400 HW500 HR HP400 HI380 HI500 HI750 HI100 HK50 HAS300 HPO400 HS200 HS500 Garbage disposal wrench Four way key Complete wrench set Radiator spud wrench 4 way plug wrench 3/8” internal pipe wrench 1/2” internal pipe wrench 3/4” internal pipe wrench 1” internal pipe wrench Utility knife w/extra blade Adjustable strainer wrench 4-Way plug wrench Strainer wrench Spanner/strainer wrench TM Ctn Qty 1 6 1 5 1 5 5 5 5 12 10 10 10 10 List Price $ 7.11 5.23 16.36 22.37 25.86 4.40 5.48 5.72 10.50 7.40 15.54 7.04 8.64 8.47 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Insert Fittings - Cast Bronze • For use with flexible plastic pipe • Heavy Pattern, contractor grade cast bronze. • Imported Part Number Size Style Number of Barbs Ctn/Case List Qty Price Cast Bronze Male Insert Adapters (INS x MIP) RBMA RRBMA RBMA1/2 RBMA3/4 RBMA1 RRBMA1 RBMA1X3/4 RBMA1X11/4 RBMA11/4 RBMA11/4X1 RBMA11/2 RBMA11/2X11/4 RBMA2 1/2” x 1/2” 3/4” x 3/4” 1” x 1” 1” x 1” 1” x 3/4” 1” x 11/4” 1 1/4” x 1 1/4” 1 1/4” x 1” 1 1/2” x 1 1/2” 11/2” x 1 1/4” 2” x 2” Hex Hex Hex Round Hex Hex Hex Hex Hex Hex Hex 5 5 7 6 5 6 6 7 6 6 7 10/200 10/200 10/100 10/100 10/100 10/100 10/100 10/100 5/50 10/100 5/50 $ 7.04 9.00 13.41 13.79 10.79 16.75 17.96 17.32 20.79 18.89 33.71 12 12 12 12 10/100 10/100 10/100 5/50 20.18 20.32 23.93 41.64 Hex Hex 6 6 10/80 10/40 22.78 20.33 Round w/ rope eye Round w/ rope eye Round w/ rope eye 11 6 6 10/100 10/100 10/100 15.61 17.51 19.64 Round Round Round Round Round Round 5 5 5 7 6 7 10/200 10/100 10/100 10/100 5/50 5/50 9.11 10.18 16.61 19.54 23.68 36.96 Hex Hex Hex Hex Hex Hex Hex Hex 4 4 5x6 5 6 6 4 4 10/220 10/200 10/100 10/100 10/100 10/100 5/50 5/50 6.30 9.50 12.50 13.04 20.32 19.00 19.79 28.00 12 12 12 10/100 5/50 5/25 20.71 29.93 54.68 Cast Bronze Extra Long Male Adapters (INS x MIP) XLRBMA1 XLRBMA1x11/4 XLRBMA11/4 XLRBMA2 1” x 1” 1” x 1 1/4” 1 1/4” x 1 1/4” 2” x 2” Hex Hex Hex Hex Cast Bronze Male Union Adapters (INS x MIP) XLRBMA RBMUA1 RBMUA11/4 1” x 1” 1 1/4” x 1 1/4” Cast Bronze Rope Adapter (INS x MIP) RBRA1 RBRA1X11/4 RBRA11/4 1” x 1” 1” x 1 1/4” 1 1/4” x 1 1/4” RBMUA Cast Bronze Female Adapters (INS x FIP) RBRA RBFA RBC RBFA1/2 RBFA3/4 RBFA1 RBFA11/4 RBFA11/2 RBFA2 1/2” x 1/2” 3/4” x 3/4” 1” x 1” 1 1/4” x 1 1/4” 1 1/2” x 1 1/2” 2” x 2” Cast Bronze Couplings (INS x INS) RBC1/2 RBC3/4 RBC3/4X1 RBC1 RBC1X11/4 RBC11/4 RBC11/2 RBC2 1/2” x 1/2” 3/4” x 3/4” 3/4” x 1” 1” x 1” 1” x 1 1/4” 1 1/4” x 1 1/4” 1 1/2” x 1 1/2” 2” x 2” Cast Bronze Extra Long Couplings (INS x INS) XLRBC XLRBC1 XLRBC11/4 XLRBC2 TM 1” x 1” 1 1/4” x 1 1/4” 2” x 2” Hex Hex Hex www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 12.3 Insert Fittings - Cast Bronze • For use with flexible plastic pipe • Heavy Pattern, contractor grade cast bronze. • Imported Part Number RBHE Size Cast Bronze Hydrant Elbow (INS x MIP) RBHE3/4 RBHE1x3/4 RBHE1 RBHE11/4 3/4” x 3/4” 1” x 3/4” 1” x 1” 1 1/4” x 1 1/4” Number of Barbs Ctn/Case Qty 5 5 5 6 10/100 10/100 10/100 5/50 $ 11.80 21.25 16.75 30.86 8 10 10/100 10/100 21.61 18.75 8 8 6 5/50 5/50 5/50 21.86 21.86 25.79 5 6 6 10/200 10/100 10/50 13.68 18.36 30.32 10/100 10/100 10/80 5/50 13.96 13.96 18.04 28.71 4 6 4 10/100 10/100 10/100 16.00 22.14 21.61 5 6 6 10/100 10/100 5/50 15.36 25.79 39.57 6 6 6 6 10/100 6/60 8/80 4/40 20.83 37.10 31.50 45.56 List Price Cast Bronze Extra Long Hydrant Elbows (INS x MIP) XLRBHE1 XLRBHE1X3/4 1” x 1” 1” x 3/4” Cast Bronze Combination Elbows (INS x FIP) RBFE RBFE1 RBFE1x11/4 RBFE11/4 RBE 1” x 1” 1” x 1 1/4” 1 1/4” x 1 1/4” Cast Bronze Elbows (INS x INS) RBE3/4 RBE1 RBE11/4 3/4” x 3/4” 1” x 1” 1 1/4” x 1 1/4” Cast Bronze Ground Source Elbows (INS x MIP w/ 1/4” tap) RBGSE3/4 RBGSE1X3/4 RBGSE1 RBGSE11/4 3/4” x 3/4” 1” x 3/4” 1” x 1” 1 1/4” x 1 1/4” RBGSE RBHT RBT Cast Bronze Hydrant Tees (INS x MIP) RBHT3/4 RBHT1X3/4 RBHT1 3/4” x 3/4” 1” x 3/4” 1” x 1” Cast Bronze Tees (INS x INS) RBT3/4 RBT1 RBT11/4 3/4” x 3/4” 1” x 1” 1 1/4” x 1 1/4” Cast Bronze Combination Tees (INS x FPT) RBFT3/4 RBFT1 RBFT1X1X3/4 RBFT11/4 3/4" x 3/4" 1" x 1" 1” x 1” x 3/4” 1 1/4” x 1 1/4” RBFT 6/14/11 12.4 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Insert Fittings - Steel, Zinc Plated • • • • * For use with flexible poly pipe Made in North America. IMAS Imported Made from Sch 40 C.W. steel pipe, zinc plated. ** S12, IMAS XS12, IMAS--XL S38 S74, IMAS S86 TM Part Number Size Ctn/Case Qty Male Adapter, mipt x ins * S12-1/2 1/2" 25 S12-3/4 3/4” 25 S12-1 1” 20 S12-11/4 1-1/4” 20 S12-11/2 1-1/2” 10 S12-2 2” 10 S12-21/2 2-1/2” BULK S12-3 3” BULK S12-4 4” BULK Male Adapter, mipt x ins IMPORTED ** IMAS50 1/2" 50/300 IMAS75 3/4" 50/200 IMAS100 1" 25/200 IMAS125 1 1/4" 12/108 IMAS150 1 1/2" 6/90 IMAS200 2" 5/60 IMAS250 2 1/2” 2/10 IMAS300 3” 2/10 IMAS400 4” 2/10 Extra Long Male Adapter, mipt x ins * XS12-1 1” 25 XS12-11/4 1-1/4” 25 XS12-11/2 1-1/2” 25 Extra Long Male Adapter, mipt x ins IMPORTED ** IMAS100XL 1” 10/120 IMAS125XL 1 1/4” 10/80 Reducing Male Adapter, mipt x ins * S38-3/4X1/2 3/4" x 1/2" 25 S38-1X3/4 1" x 3/4” 25 S38-11/4X1 1-1/4" x 1” 25 S38-11/2X11/4 1-1/2" x 1-1/4” 25 S38-2X11/2 2" x 1-1/2” 25 Reducing Male Adapter, ins x mipt * S74-1X3/4 1" x 3/4” 25 S74-11/4X1 1-1/4" x 1 25 S74-11/2X11/4 1-1/2" x 1-1/4” 25 Reducing Male Adapter, ins x mipt IMPORTED ** IMAS7550 3/4” x 1/2” 250 IMAS1075 1” x 3/4” 250 Venturi Adapter, mipt x ins * S86-3/4X6 3/4" x 6” 25 S86-3/4X10 3/4" x 10" 25 S86-3/4X12 3/4 x 12” 25 S86-1X6 1" x 6" 25 S86-1X8 1" x 8" 25 S86-1x10 1" x 10" 25 S86-1X12 1" x 12" 25 S86-11/4X6 1-1/4" x 6" 25 S86-11/4X8 1-1/4" x 8" 25 S86-11/4X10 1-1/4" x 10" 25 S86-11/4X12 1-1/4" x 12” 25 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 List Price $ 4.63 4.95 6.34 8.03 9.95 14.36 37.66 50.80 82.29 1.39 1.91 2.51 4.49 5.83 8.55 21.95 24.87 39.86 12.30 16.25 18.71 4.04 6.96 20.10 22.16 25.29 31.42 42.17 12.44 17.80 21.20 4.47 5.14 18.05 21.48 21.76 13.71 16.56 18.60 21.24 18.66 21.01 25.34 32.46 6/14/11 12.5 Insert Fittings - Steel, Zinc Plated • • • • For use with flexible poly pipe Made in North America. ISVMA, ISWSE, IFAS, ICS - Imported Made from Sch 40 C.W. steel pipe, zinc plated. * ** ISVMA S99, ISWSE S10, ICS XS10, ICS--XL S90, IFAS 6/14/11 12.6 Part Number Size Ctn/Case Qty Venturi Adapter, mipt x ins IMPORTED ** ISVMA1X6 1" x 6" 60 ISVMA1X8 1" x 8" 50 ISVMA1X10 1" x 10" 40 ISVMA11/4X6 1-1/4" x 6" 50 ISVMA11/4X8 1-1/4" x 8" 40 ISVMA11/4X10 1-1/4" x 10" 30 Well Seal Elbow, ins x ins * S99-1 1” 10 S99-11/4 1-1/4” 10 Well Seal Elbow, ins x ins IMPORTED ** ISWSE100 1” BULK ISWSE125 1-1/4” BULK Coupling, ins x ins * S10-1/2 1/2” 25 S10-3/4 3/4” 25 S10-1 1” 20 S10-11/4 1-1/4” 20 S10-11/2 1-1/2” 10 S10-2 2” 10 S10-3 3” BULK S10-4 4” BULK Coupling, ins x ins IMPORTED ** ICS50 1/2" 50/300 ICS75 3/4" 50/200 ICS100 1" 25/200 ICS125 1 1/4" 20/120 ICS150 1 1/2" 10/60 ICS200 2" 10/60 ICS250 2 1/2” 2/10 ICS300 3” 2/10 ICS400 4” 2/10 Extra Long Coupling, ins x ins * XS10-1 1” 25 XS10-11/4 1-1/4” 25 Extra Long Coupling, ins x ins IMPORTED ** ICS100XL 1” 10/120 ICS125XL 1-1/4” 10/80 Female Adapter, fipt x ins * S90-1/2 1/2” 25/300 S90-3/4 3/4” 25/200 S90-1 1” 20/160 S90-11/4 1-1/4” 20/120 S90-11/2 1-1/2” 10/60 S90-2 2” 10/40 Female Adapter, fipt x ins IMPORTED ** IFAS100 1” 125 IFAS125 1 1/4” 100 TM List Price $ 5.43 7.95 9.44 7.46 9.27 11.49 26.66 36.03 13.11 21.54 4.18 4.95 6.70 9.51 10.64 19.60 65.36 104.56 1.35 1.91 2.34 4.38 5.57 7.40 21.99 24.46 29.46 22.32 32.08 3.93 6.96 12.82 16.76 21.61 26.93 31.99 38.79 4.82 11.11 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Insert Fittings - Stainless Steel Features: • Imported cast from Grade 304 Stainless Steel. • Made in U.S.A. from Grade 316 Stainless Steel. • For use with flexible poly pipe. Part Number Size # Barbs Grade 304 SS, IMPORTED Male Adapters, MIPT X INS, HEX PATTERN SSMA Series XLSSMA SSMA1/2 SSMA3/4 SSMA1 SSMA11/4 SSMA11/4X1 SSMA11/2 SSMA2 1/2" 3/4" 1” 1 1/4” 1 1/4” x 1” 1 1/2" 2" Ctn/Case Qty 6 6 6 6 6 6 6 List Price 10/200 10/200 10/100 5/100 5/100 5/80 5/40 $ 8.18 10.26 17.00 20.71 18.00 26.89 37.49 13 5/60 46.86 # Barbs Ctn/Case Qty Grade 304 SS, HEAVY PATTERN EXTRA LONG, IMPORTED Male Adapters, MIPT X INS, HEX PATTERN XLSSMA11/4X1 1 1/4” x 1” Part Number Size Grade 316 SS, MADE IN U.S.A. Male Adapter, MIPT X INS SS12-1/2 SS12-3/4 SS12-1 SS12-11/4 SS12-11/2 SS12-2 SS12 Series List Price , ROUND PATTERN 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” 6 7 7 6 6 7 25/300 25/200 20/160 20/120 10/60 10/40 $ 21.17 19.49 22.08 36.20 49.01 64.41 7 25/100 52.13 14 14 25 25 43.07 56.11 7 7 20 20 31.50 41.64 25 56.98 SS38 Series Male Reducing Adapter mipt x red. ins SS38-11/4x1 1-1/4 x 1” Grade 316 SS, EXTRA LONG, MADE IN U.S.A. Male Adapter, MIPT X INS , ROUND PATTERN XSS12-1 XSS12-11/4 1 11/4 Grade 316 SS, MADE IN U.S.A. Coupling, INS X INS, ROUND PATTERN SS10-1 SS10-11/4 1 11/4 Grade 316 SS, EXTRA LONG, MADE IN U.S.A. Coupling, INS X INS, ROUND PATTERN SS10 Series XSS10-1 TM 1 14 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 12.7 Insert Fittings - Yellow Brass • For use with flexible poly pipe • Imported Part Number Size Ctn/Case Qty List Price Yellow Brass Adapters, ins x solder YB00-1/2 YB00-3/4 YB00-1 YB00-11/4 YB00-11/2 YB00 1/2” 3/4” 1” 1-1/4” 1-1/2” 10/200 10/200 10/200 10/200 5/80 $ 4.11 5.86 7.93 8.39 29.46 10/200 10/200 10/200 10/200 4.82 5.54 7.50 9.82 10/200 9.25 Yellow Brass Couplings, ins x ins YB10-1/2 YB10-3/4 YB10-1 YB10-11/4 1/2” 3/4 “ 1” 1-1/4” YB10 Yellow Brass Adapters, ins x mipt YB12-1 1” YB12 6/14/11 12.8 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Compression Couplings-Imported, PVC/CPVC PVC Compressing Coupling Features: • Iron Pipe Size (PVC), Copper Tube Size (CPVC) • For use with cold water (PVC) or hot water (CPVC-CTS) • Natural rubber gasket seals • Rated at 200 psi at 70°F • Imported "PC" Series IPS DIMENSIONS (IN.) SIZE D d d1 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” 6” 1.85 2.09 2.40 2.87 3.15 3.62 4.53 5.28 6.34 8.78 .91 1.18 1.42 1.81 2.05 2.56 2.52 3.62 4.65 6.85 L .83 1.04 1.31 1.65 1.89 2.37 2.87 3.49 4.49 6.62 5.24 5.32 5.75 6.30 6.89 7.87 9.92 10.87 11.93 11.22 "HW" Series CTS DIMENSIONS (IN.) 1/2” 3/4” MATERIAL SPECIFICATIONS # 1 2 3 Part Body Compression Nut Gasket - PVC Gasket - CPVC 1.30 1.85 .71 .95 .63 .88 4.49 5.00 Material UPVC, CPVC UPVC, CPVC NR EPDM Part Number Material Size Case Qty PC10-1/2 PC10-3/4 PC10-1 PC10-11/4 PC10-11/2 PC10-2 PC10-21/2 PC10-3 PC10-4 PC10-6 PVC PVC PVC PVC PVC PVC PVC PVC PVC PVC 1/2” IPS 3/4” IPS 1” IPS 1 1/4” IPS 1 1/2” IPS 2” IPS 2 1/2” IPS 3” IPS 4” IPS 6” IPS 100 90 60 40 30 20 10 4 2 2 HW10CTS1/2 HW10CTS3/4 CPVC CPVC 1/2” CTS 3/4” CTS 20/360 20/240 Part Number For Use with Coupling Sizes Ctn Qty List Price $ 2.33 2.70 3.49 4.20 5.79 8.06 18.42 26.06 34.39 82.73 4.07 4.93 List Price Adjustable Strap Wrench SW400 SW600 1/2” through 4” 1/2” through 6” 10/60 10/60 $ 17.68 20.18 SW Series TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 4/2009 12.15 Compression Fittings, Galvanized Galvanized Long Pattern Compression Fitting Features: • Bodies made of steel tubing (GC10), malleable iron (GC10C) • End nuts made of malleable iron. • Galvanized finish • Buna-N gaskets on domestic fittings. • SBR gaskets on GC10C series. • Maximum rated service temperature for gaskets: 212°F (100º C). • GC10C manufactured for AGI in an ISO9002 facility. WARNING: Designer and/or contractor must provide suitable anchoring of piping to prevent pull-out from fittings when applications subject piping to external forces such as ground shift and temperature variations that cause linear pipe contraction. Recommended Maximum Pressure(PSI) Size 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” Torque Ft. Lbs Anchored Piping 150 150 100 100 100 75 150 150 225 225 225 300 Coupling GC10C - Long Pattern - Imported - Malleable Iron, 125 PSI, 120° F Part Number Size Pipe O.D. Ctn/Case Qty List Price GC10C Series ISO 9002 GC10C1/2 GC10C3/4 GC10C1 GC10C11/4 GC10C11/2 GC10C2 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” .840 1.050 1.315 1.660 1.900 2.375 Coupling GC10 - Made in U.S.A. - Steel Tube Part Number Size Pipe O.D. GC10 Series GC10-1/2 GC10-3/4 GC10-1 GC10-11/4 GC10-11/2 GC10-2 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” .840 1.050 1.315 1.660 1.900 2.375 Adapters GC12 - Made in U.S.A. - Steel Tube Part Number Size Pipe O.D. GC12-1/2 GC12-3/4 GC12-1 GC12-11/4 GC12-11/2 GC12-2 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” .840 1.050 1.315 1.660 1.900 2.375 30 / 60 25 / 50 15 / 30 12 / 24 9 / 18 14 Ctn Qty $ 10.20 11.44 13.42 17.04 20.19 30.19 List Price 12 12 12 6 6 6 $ 25.66 27.98 33.04 44.12 48.73 61.24 Ctn Qty List Price 12 12 12 6 6 6 $ 37.50 36.18 38.31 45.54 63.32 63.44 GC12 Series 6/14/11 12.16 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Pipe Repair Clamps Repair Clamp Features: • Pipe repair clamps eliminate the need for costly pipe replacement for simple leaks. • Non-corrosive clamp band is made of annealed stainless steel. • Nuts and bolts are cadmium plated with a chromate finish; heavy duty hex nut with washer. • Lugs are made of annealed, malleable iron for maximum strength and permanence; iron phosphate finish. • Neoprene gasket with maximum rated service temperature of 212° F (100ºC). • Imported Straight through bolt pull on lugs gives more uniform pressure on the band, more pressure on pipe with less torque on nut. Oval lug opening in band won’t tear - no corners to rip out as with square hole. Lugs above pipe level don’t pull into pipe. Gives more tension on band - more sealing power yet won’t crush pipe. Band covers lead edge of lug. Equal pressure across entire band. No friction - no cutting into pipe surface by raw edge of band opening. TM Part Number 3” Wide, 1 Bolt HRC3-3/8 HRC3-1/2 HRC3-3/4 HRC3-1 HRC3-11/4 HRC3-11/2 HRC3-2 HRC3-21/2 HRC3-3 HRC3-4 Nominal Pipe Size IPS Pipe O.D. CTS Tube O.D. Ctn Qty List Price 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” .675 .840 1.050 1.315 1.660 1.900 2.375 2.875 3.50 4.50 .625 .875 1.125 1.375 1.625 6/72 6/72 6/72 6/72 6/72 6/72 6/72 6/48 6/48 6/24 $ 5.94 6.98 7.13 7.97 8.79 8.90 10.67 11.37 12.05 12.35 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” .840 1.050 1.315 1.660 1.900 2.375 2.875 3.50 4.50 .875 1.125 1.375 1.625 6/56 6/56 6/56 6/56 6/56 6/56 6/24 6/24 6/24 12.54 13.44 13.60 15.06 16.49 19.77 21.28 22.44 22.92 6” Wide, 2 Bolts HRC6-1/2 HRC6-3/4 HRC6-1 HRC6-11/4 HRC6-11/2 HRC6-2 HRC6-21/2 HRC6-3 HRC6-4 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 12.17 Couplings, Caps - Flexible & No-Hub Coupling, Cap Features: • Flexible couplings for joining all types of sewer pipe, including transitions from one type to another. • NO-HUB couplings for joining cast iron pipe sections • End Caps for capping cast iron, steel, PVC and ABS pipe. • 300 Series stainless steel clamps • Meets IAPMO File #0317, BOCA ESI RR#90-68, SBCCI PST&ESI Report #9483B • CSA Approved Part Number Size NO HUB COUPLINGS Connection C150C C200C C215C C300C C400C CI X CI CI X CI CI X CI CI X CI CI X CI 100 100 100 100 100 $ 9.37 9.37 10.92 10.92 13.22 1 1/2 X 1 1/2 2X2 2 X 1 1/2 3X3 4X4 Ctn Qty List Price FLEXIBLE COUPLINGS C Series MR Series MR0244 4X4 CLAY X CI/PL 18 14.44 MR5615/125 11/4 x 1 1/2 CI/PL x TUBE 24 7.60 MR56125 1 1/2” Tubing, Copper or 1 1/4” PL to Same 24 6.89 MR5615 MR5622/125 MR56215 MR5622 MR56315 MR5632 MR5633 MR5642 MR5643 MR5644 MR5655 MR5664 MR5666 1 1/2 x 1 1/2 2 x 1 1/4 2 X 1 1/2 2X2 3 x 1 1/2 3X2 3X3 4x2 4X3 4X4 5X5 6x4 6X6 CI/PL X CI/PL CI/PL x CI/PL CI/PL X CI/PL CI/PL X CI/PL CI/PL x CI/PL CI/PL X CI/PL CI/PL X CI/PL CI/PL x CI/PL CI/PL X CI/PL CI/PL X CI/PL CI/PL X CI/PL CI/PL x CI/PL CI/PL X CI/PL 24 24 24 24 24 24 18 18 18 24 14 10 12 7.31 7.66 8.33 7.88 13.93 9.84 10.64 17.19 14.35 13.33 20.88 31.02 28.51 DRAIN PIPING TO TUBULAR TRAP * MRTC Series MRTC150 1 1/4” x 1 1/2” 24 MRDTC150 1 1/4” or 1 1/2” x 1 1/4” or 1 1/2” 24 MRDTC215 2” x 1 1/4” or 1 1/2” 24 * Any combination of 1 1/4” or 1 1/2” tubular drain (plastic, tubular or copper) 4.19 5.13 6.77 END CAPS 0701-011 0702-019 0703-017 0704-015 0705-020 0706-028 1 1/2” 2” 3” 4” 5” 6” 24 24 24 24 20 12 4.08 4.80 6.07 7.76 15.51 15.97 07 Series 7/20/10 12.18 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Threaded Bronze Fittings Threaded Bronze 125 lb. SIAM Threaded Bronze 125 lb. CHINA • • • • • • • Dimension: ANSI B16.15, ASME B16.14, A-A-59617, MSS-SP-106 Threads: ANSI/ASME B1.20.1 Material: ASTM B62-93 (C83600) Imported. Manufactured for AGI in an ISO 9001 facility. ISO 9001 SIAM - THAILAND Part Number Size 90 º Elbow, fipt x fipt B90L Series B90L1/8 B90L1/4 B90L3/8 B90L1/2 B90L3/4 B90L1 B90L11/4 B90L11/2 B90L2 B90L21/2 B90L3 B90L4 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” 2 1/2” 3” 4” Ctn Qty List Price 25 25 25 25 25 20 10 5 5 1 1 1 $ 6.32 6.32 6.32 9.59 12.98 19.96 31.75 39.67 64.50 126.62 194.23 647.40 25 25 25 25 10 10.42 14.16 24.87 24.87 38.84 25 25 25 25 25 25 10 10 5 1 1 1 6.92 6.92 6.92 8.78 12.98 21.85 34.95 43.77 71.03 192.26 309.00 706.36 25 25 25 25 25 10 10 10 5 1 1 1 9.59 9.59 9.59 11.95 16.89 27.89 42.75 55.60 94.34 206.02 309.00 927.13 90 º Elbow, Reducer fipt x fipt B90L1/2X3/8 B90L3/4X1/2 B90L1x1/2 B90L1X3/4 B90L11/4X1 B90L Reducer Series B45L Series 1/2” x 3/8” 3/4” x 1/2” 1” x 1/2” 1” x 3/4” 1 1/4” x 1” 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” 2 1/2” 3” 4” B90SL Series TM 1/8” 1/4“ 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” 2 1/2” 3” 4” Part Number Ctn Qty List Price 90 º Elbow, fipt x fipt TB90L1/8 TB90L1/4 TB90L3/8 TB90L1/2 TB90L3/4 TB90L1 TB90L11/4 TB90L11/2 TB90L2 TB90L21/2 TB90L3 50/600 100/400 75/300 50/200 25/100 20/80 25/50 35 20 10 6 $ 4.01 4.01 4.01 6.08 8.24 12.70 20.14 25.19 40.98 80.46 123.39 TB90L1/2X3/8 TB90L3/4X1/2 TB90L1x1/2 TB90L1X3/4 TB90L11/4X1 50/200 30/120 25/100 25/50 50 6.61 9.03 15.79 15.79 24.64 45º Elbows, fipt x fipt 90 º Street Elbow, fipt x mipt B90SL1/8 B90SL1/4 B90SL3/8 B90SL1/2 B90SL3/4 B90SL1 B90SL11/4 B90SL11/2 B90SL2 B90SL21/2 B90SL3 B90SL4 CHINA 90 º Elbow, Reducer fipt x fipt 45º Elbows, fipt x fipt B45L1/8 B45L1/4 B45L3/8 B45L1/2 B45L3/4 B45L1 B45L11/4 B45L11/2 B45L2 B45L21/2 B45L3 B45L4 Threads: ANSI B16.15 125S fittings Threads: ANSI B16.24 150S flanges Material: ASTM B584-C84400 TB45L1/8 TB45L1/4 TB45L3/8 TB45L1/2 TB45L3/4 TB45L1 TB45L11/4 TB45L11/2 TB45L2 50/600 120/480 50/300 50/200 25/100 90 50 40 25 4.39 4.39 4.39 5.58 8.24 13.90 22.19 27.81 45.10 90 º Street Elbow, fipt x mipt TB90SL1/8 TB90SL1/4 TB90SL3/8 TB90SL1/2 TB90SL3/4 TB90SL1 TB90SL11/4 TB90SL11/2 TB90SL2 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 200/800 100/400 60/240 50/200 25/100 20/60 20/40 35 25 6.08 6.08 6.08 7.60 10.71 17.69 27.14 35.32 59.92 6/14/11 12.27 Threaded Bronze Fittings Threaded Bronze 125 lb. SIAM Threaded Bronze 125 lb. CHINA • • • • • • • Dimension: ANSI B16.15, ASME B16.14, A-A-59617, MSS-SP-106 Threads: ANSI/ASME B1.20.1 Material: ASTM B62-93 (C83600) Imported. Manufactured for AGI in an ISO 9001 facility. ISO 9001 SIAM - THAILAND Part Number Size 45º Street Elbows, fipt x mipt B45SL Series B45SL1/8 B45SL1/4 B45SL3/8 B45SL1/2 B45SL3/4 B45SL1 B45SL11/4 B45SL11/2 B45SL2 Ctn Qty List Price 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 25 25 25 25 25 10 10 5 1 $ 9.79 9.79 9.79 11.95 16.89 27.89 42.75 57.28 145.04 25 25 25 25 25 10 5 5 5 1 1 1 8.78 8.78 8.78 11.12 15.91 28.26 39.67 54.52 89.42 240.14 265.74 882.76 10 25 10 10 10 10 10 10 10 5 5 5 5 5 5 1 19.09 20.97 37.93 37.92 37.92 34.70 37.93 37.91 53.21 49.04 67.57 67.57 67.57 110.41 110.41 110.41 Tee, fipt x fipt x fipt BT Series BT1/8 BT1/4 BT3/8 BT1/2 BT3/4 BT1 BT11/4 BT11/2 BT2 BT21/2 BT3 BT4 BT Reducer Series 6/14/11 12.28 CHINA Part Number Ctn Qty List Price 45º Street Elbows, fipt x mipt TB45SL1/8 TB45SL1/4 TB45SL3/8 TB45SL1/2 TB45SL3/4 TB45SL1 TB45SL11/4 TB45SL11/2 TB45SL2 50/600 35/420 270 100/20 60/120 30/60 20/40 15/30 18 $ 6.21 6.21 6.21 7.60 10.71 17.69 27.14 36.41 61.69 Tee, fipt x fipt x fipt 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” 2 1/2” 3’ 4” Tee, Reducer fipt x fipt x fipt BT3/4X1/2 BT3/4X3/4X1/4 BT3/4X1 BT1X1/4 BT1X1/2 BT1X3/4 BT1X3/4X3/4 BT1X3/4X1 BT11/4X3/4 BT11/4X1 BT11/2X3/4 BT11/2X1 BT11/2X11/4 BT2X3/4 BT2X1 BT2X11/2 Threads: ANSI B16.15 125S fittings Threads: ANSI B16.24 150S flanges Material: ASTM B584-C84400 3/4 x 3/4 x 1/2” 3/4 x 3/4 x 1/4” 3/4 x 3/4 x 1” 1 x 1 x 1/4” 1 x 1 x 1/2” 1 x 1 x 3/4” 1 x 3/4 x 3/4” 1 x 3/4 x 1” 1 1/4 x 1 1/4 x 3/4” 1 1/4 x 1 1/4 x 1” 1 1/2 x 1 1/2 x 3/4” 1 1/2 x 1 1/2 x 1” 1 1/2 x 1 1/2 x 11/4 2 x 2 x 3/4” 2 x 2 x 1” 2 x 2 x 1 1/2” TM TBT1/8 TBT1/4 TBT3/8 TBT1/2 TBT3/4 TBT1 TBT11/4 TBT11/2 TBT2 TBT3 75/450 50/300 45/180 40/120 35/70 20/40 14/28 11/22 6/12 5.58 5.58 5.58 7.09 10.08 17.96 25.19 34.65 56.77 1/6 168.79 Tee, Reducer fipt x fipt x fipt TBT3/4X1/2 45/90 12.12 TBT1X1/4 TBT1X1/2 TBT1X3/4 60 35/70 30/60 65 50 18/36 18/36 15/30 13/26 13/26 9/18 9/18 8/16 24.11 24.11 22.08 24.11 24.11 33.80 31.15 42.90 42.90 42.90 70.11 70.11 70.11 TBT1X3/4X3/4 TBT1X3/4X1 TBT11/4X3/4 TBT11/4X1 TBT11/2X3/4 TBT11/2X1 TBT11/2X11/4 TBT2X3/4 TBT2X1 TBT2X11/2 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Threaded Bronze Fittings Threaded Bronze 125 lb. SIAM Threaded Bronze 125 lb. CHINA • • • • • • • Dimension: ANSI B16.15, ASME B16.14, A-A-59617, MSS-SP-106 Threads: ANSI/ASME B1.20.1 Material: ASTM B62-93 (C83600) Imported. Manufactured for AGI in an ISO 9001 facility. ISO 9001 SIAM - THAILAND BCR Series Part Number Cross, fipt Size BCR1/8 BCR1/4 BCR3/8 BCR1/2 BCR3/4 BCR1 BCR11/4 BCR11/2 BCR2 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” Ctn Qty List Price 100 275 125 25 10 5 1 8 1 $ 21.93 21.93 21.93 26.64 25.81 40.89 64.04 84.96 170.40 25 25 25 25 25 25 10 10 5 1 1 1 6.71 6.71 6.71 8.41 11.12 16.86 26.30 35.72 58.82 127.30 176.54 338.50 25 25 25 100 25 25 25 50 25 25 25 25 10 10 10 35 10 10 10 25 15 10 10 5 7.14 6.59 7.14 10.77 8.95 8.95 14.75 14.43 13.27 22.11 22.11 22.11 39.44 35.72 35.72 64.49 50.87 45.17 45.17 96.71 96.71 75.62 67.19 67.19 Couplings, fipt x fipt BC Series BC1/8 BC1/4 BC3/8 BC1/2 BC3/4 BC1 BC11/4 BC11/2 BC2 BC21/2 BC3 BC4 1/8“ 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” 2 1/2” 3” 4” BC Reducer Series Case quantities required please for fittings through 2” TM 1/4 x1/8” 3/8 x 1/8” 3/8” x 1/4” 1/2” X 1/8” 1/2 x 1/4” 1/2 x 3/8” 3/4 x 1/4” 3/4” X 3/8” 3/4 x 1/2” 1” X 3/8” 1 x 1/2” 1 x 3/4” 1-1/4 x 1/2” 1-1/4 x 3/4” 1-1/4 x 1” 1 1/2” X 1/2” 11/2” x 3/4” 1-1/2 x 1” 1-1/2 x 1-1/4” 2” X 1/2” 2” X 3/4” 2 x 1” 2 x 1-1/4” 2 x 1-1/2” CHINA Part Number Cross, fipt Ctn Qty List Price TBCR1/8 TBCR1/4 TBCR3/8 TBCR1/2 TBCR3/4 TBCR1 TBCR11/4 180 80 30/60 45 30/60 40 24 $ 11.36 11.36 11.36 11.36 16.38 35.97 40.67 TBCR2 5/10 108.24 Couplings, fipt x fipt Couplings, Reducing fipt x fipt BC1/4X1/8 BC3/8X1/8 BC3/8X1/4 BC1/2X1/8 BC1/2X1/4 BC1/2X3/8 BC3/4X1/4 BC3/4X3/8 BC3/4X1/2 BC1X3/8 BC1X1/2 BC1X3/4 BC11/4X1/2 BC11/4X3/4 BC11/4X1 BC11/2X1/2 BC11/2X3/4 BC11/2X1 BC11/2X11/4 BC2X1/2 BC2X3/4 BC2X1 BC2X11/4 BC2X11/2 Threads: ANSI B16.15 125S fittings Threads: ANSI B16.24 150S flanges Material: ASTM B584-C84400 TBC1/8 TBC1/4 TBC3/8 TBC1/2 TBC3/4 TBC1 TBC11/4 TBC11/2 TBC2 60/720 150/600 100/400 50/200 25/100 100 75 50 30 4.26 4.26 4.26 5.37 7.09 10.68 16.70 22.69 37.37 Couplings, Reducing fipt x fipt TBC1/4X1/8 TBC3/8X1/8 TBC3/8X1/4 TBC1/2X1/8 TBC1/2X1/4 TBC1/2X3/8 TBC3/4X1/4 TBC3/4X3/8 TBC3/4X1/2 35/420 30/360 30/360 70/280 75/300 40/240 50/200 30/180 45/180 4.58 4.58 4.58 5.67 5.67 5.67 9.35 8.44 8.44 TBC1X1/2 TBC1X3/4 30/120 25/100 25/75 90 80 20/60 30/90 65 60 40 40 40 40 35 14.05 14.05 25.07 22.69 22.69 32.32 32.32 28.69 28.69 48.01 48.01 48.01 42.65 42.65 TBC11/4X1/2 TBC11/4X3/4 TBC11/4X1 TBC11/2X1/2 TBC11/2X3/4 TBC11/2X1 TBC11/2X11/4 TBC2X1/2 TBC2X3/4 TBC2X1 TBC2X11/4 TBC2X11/2 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 12.29 Threaded Bronze Fittings Threaded Bronze 125 lb. SIAM Threaded Bronze 125 lb. CHINA • • • • • • • BB Series BCP Series 6/14/11 12.30 Dimension: ANSI B16.15, ASME B16.14, A-A-59617, MSS-SP-106 Threads: ANSI/ASME B1.20.1 Material: ASTM B62-93 (C83600) Imported. Manufactured for AGI in an ISO 9001 facility. Threads: ANSI B16.15 125S fittings Threads: ANSI B16.24 150S flanges Material: ASTM B584-C84400 ISO 9001 SIAM - THAILAND Part Number Size Ctn Qty List Price Bushing, mipt x fipt CHINA Part Number Ctn Qty List Price Bushing, mipt x fipt BB1/4X1/8 BB3/8X1/8 BB3/8X1/4 BB1/2x1/8 BB1/2X1/4 BB1/2X3/8 BB3/4X1/8 BB3/4X1/4 BB3/4X3/8 BB3/4X1/2 BB1X1/4 BB1X3/8 BB1X1/2 BB1X3/4 BB11/4X1/4 BB11/4X3/8 BB11/4X1/2 BB11/4X3/4 BB11/4X1 BB11/2X1/2 BB11/2X3/4 BB11/2X1 BB11/2X11/4 BB2X1/2 BB2X3/4 BB2X1 BB2X11/4 BB2X11/2 BB21/2X1 BB21/2X11/4 BB21/2X11/2 BB21/2X2 BB3X1 BB3X2 1/4 x 1/8” 3/8x 1/8” 3/8 x 1/4” 1/2” x 1/8” 1/2 x 1/4” 1/2 x 3/8” 3/4 x 1/8” 3/4 x 1/4” 3/4 x 3/8” 3/4 x 1/2” 1 x 1/4” 1” X 3/8” 1 x 1/2” 1 x 3/4” 1-1/4 x 1/4” 1 1/4” X 3/8” 1 1/4” x 1/2” 1-1/4 x 3/4” 1-1/4 x 1” 1-1/2 x 1/2” 1-1/2 x 3/4” 1-/2 x 1” 1-1/2 x 1-1/4” 2 X 1/2” 2 x 3/4” 2 x 1” 2 x 1-1/4” 2 x 1-1/2” 2 1/2” X 1 2 1/2” X 1 1/4” 2 1/2” X 1 1/2” 2-1/2 x 2” 3” X 1” 3 x 2” 25 25 25 25 25 25 25 25 25 25 25 125 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 10 5 5 5 5 5 5 5.72 6.61 6.83 6.34 5.34 5.34 8.88 8.88 7.32 7.32 13.51 13.51 11.12 11.12 22.72 29.43 22.72 18.93 18.93 29.52 29.52 24.16 24.16 43.05 43.05 43.05 35.72 35.72 109.95 109.95 109.94 71.48 321.23 108.10 TBB1/4X1/8 TBB3/8X1/8 TBB3/8X1/4 TBB1/2X1/8 TBB1/2X1/4 TBB1/2X3/8 TBB3/4X1/8 TBB3/4X1/4 TBB3/4X3/8 TBB3/4X1/2 TBB1X1/4 TBB1X3/8 TBB1X1/2 TBB1X3/4 TBB11/4X1/4 240/1440 100/600 100/600 150/600 100/600 100/600 50/300 50/300 50/300 50/300 50/200 200 50/200 50/200 30/120 $ 3.37 3.37 3.37 4.05 3.37 3.37 5.61 5.61 4.67 4.67 8.55 8.55 7.09 7.09 14.45 TBB11/4X1/2 TBB11/4X3/4 TBB11/4X1 TBB11/2X1/2 TBB11/2X3/4 TBB11/2X1 TBB2X1/2 TBB2X3/4 TBB2X1 TBB2X11/4 TBB2X11/2 30/120 30/120 30/120 25/75 25/75 25/75 25/75 60 20/60 20/60 20/60 20/60 14.45 12.01 12.01 18.75 18.75 15.34 15.34 27.33 27.33 27.33 22.69 22.69 TBB21/2X2 TBB3X1 TBB3X2 1/32 1/20 1/20 45.39 79.95 68.67 Caps, fipt BCP1/8 BCP1/4 BCP3/8 BCP1/2 BCP3/4 BCP1 BCP11/4 BCP11/2 BCP2 BCP21/2 BCP3 BCP4 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” 2 1/2” 3” 4” 25 25 25 25 25 25 25 10 10 5 1 1 5.02 5.02 5.02 6.71 8.88 13.77 21.07 28.43 48.26 120.02 191.41 281.71 Caps, fipt TBCP1/8 TBCP1/4 TBCP3/8 TBCP1/2 TBCP3/4 TBCP1 TBCP11/4 TBCP11/2 TBCP2 100/1200 200/800 50/600 50/300 40/240 35/140 25/100 25/75 18/54 3.17 3.17 3.17 4.26 5.61 8.77 13.36 18.07 30.64 TM TBB11/2X11/4 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Threaded Bronze Fittings Threaded Bronze 125 lb. SIAM Threaded Bronze 125 lb. CHINA • • • • • • • Dimension: ANSI B16.15, ASME B16.14, A-A-59617, MSS-SP-106 Threads: ANSI/ASME B1.20.1 Material: ASTM B62-93 (C83600) Imported. Manufactured for AGI in an ISO 9001 facility. ISO 9001 SIAM - THAILAND BLN Series Part Number Lock Nut Size BLN1/8 BLN1/4 BLN3/8 BLN1/2 BLN3/4 BLN1 BLN11/4 BLN11/2 BLN2 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” Ctn Qty List Price 25 25 25 25 25 25 25 25 10 $ 3.49 3.49 3.49 5.34 6.34 9.43 15.36 19.91 31.65 25 25 25 25 25 25 25 25 10 5 5 1 6.23 5.77 7.06 6.64 7.56 9.97 14.88 18.97 29.83 70.73 81.82 220.72 25 25 25 25 25 10 5 5 1 1 1 1 26.52 22.42 22.42 24.43 33.78 44.73 65.49 77.41 119.13 323.78 361.96 1103.60 Square Head Plug, mipt BP Series BP1/8 BP1/4 BP3/8 BP1/2 BP3/4 BP1 BP11/4 BP11/2 BP2 BP21/2 BP3 BP4 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” 2 1/2” 3” 4” BU Series TM 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” 2 1/2” 3” 4” CHINA Part Number Lock Nut TBLN1/8 TBLN1/4 TBLN3/8 TBLN1/2 TBLN3/4 TBLN1 TBLN11/4 TBLN11/2 TBLN2 Ctn Qty List Price 100/600 100/400 500/1000 100/600 50/300 60/240 30/120 25/100 30/90 $ 2.18 2.18 2.18 3.37 4.05 5.98 9.73 12.65 20.11 Square Head Plug, mipt Threaded Union, fipt x fipt BU1/8 BU1/4 BU3/8 BU1/2 BU3/4 BU1 BU11/4 BU11/2 BU2 BU21/2 BU3 BU4 Threads: ANSI B16.15 125S fittings Threads: ANSI B16.24 150S flanges Material: ASTM B584-C84400 TBP1/8 TBP1/4 TBP3/8 TBP1/2 TBP3/4 TBP1 TBP11/4 TBP11/2 TBP2 TBP3 900/3600 500/2000 45/540 150/600 100/400 50/200 35/140 30/120 100 3.68 3.68 3.68 4.24 4.81 6.32 9.46 12.01 18.97 30 50.19 Threaded Union, fipt x fipt TBU1/8 TBU1/4 TBU3/8 TBU1/2 TBU3/4 TBU1 TBU11/4 TBU11/2 TBU2 TBU3 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 30/180 60/240 35/140 25/100 20/80 35/70 35 25 18 14.27 14.27 14.27 15.50 21.46 28.42 41.61 49.15 75.68 8 229.91 6/14/11 12.31 Threaded Bronze Fittings - Chrome Plated Threaded Bronze 125 lb. SIAM • • • • Dimension: ANSI B16.15, ASME B16.14, A-A-59617, MSS-SP-106 Threads: ANSI/ASME B1.20.1 Material: ASTM B62-93 (C83600) Imported. Manufactured for AGI in an ISO 9001 facility. ISO 9001 Part Number Size Ctn Qty List Price 3/8” 1/2” 3/4” 1” 25 25 25 25 $ 44.93 44.93 60.11 97.77 3/8” 1/2” 3/4” 1” 25 25 25 25 55.24 55.24 78.43 133.81 3/8” 1/2” 3/4” 1” 25 25 25 10 60.11 60.11 82.73 135.35 3/8” 1/2” 3/4” 1” 25 25 25 10 52.78 52.78 75.01 135.35 3/8” 1/2” 3/4” 1” 25 25 25 25 37.59 37.59 52.78 90.02 90 º Elbow, fipt x fipt CP90L3/8 CP90L1/2 CP90L3/4 CP90L1 CP90L Series 45º Elbows, fipt x fipt CP45L3/8 CP45L1/2 CP45L3/4 CP45L1 CP45L Series 90 º Street Elbow, fipt x mipt CP90SL3/8 CP90SL1/2 CP90SL3/4 CP90SL1 CP90SL Series Tee, fipt x fipt x fipt CPT3/8 CPT1/2 CPT3/4 CPT1 CPT Series Couplings, fipt x fipt CPC3/8 CPC1/2 CPC3/4 CPC1 CPC Series 6/14/11 12.32 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Malleable Iron Fittings - Imported Imported Malleable Iron Fitting Features: Specifications: • Class 150 malleable iron pipe fittings • Suitable for water, steam, air, gas and oil • All fittings are air pressure tested • Working pressure: Max: 300 psi @ -20°F to 150°F. , Min 150 psi @ 350°F • Made in China • Tensile Strength:Min 48000 psi (330 MPa) • Elongation: Min 8% Material: ANSI/ASTM A197 Dimensions: ANSI B.16.3 fittings ASME/ANSI B.16.39 unions Threads: ASME/ANSI B.1.20.1 All class 150 imported malleable iron pipe fittings are manufactured under a quality control program complying with CSA B-51 speccifications. Canadian Registration Number OA5312.5C Galvanized ONLY: NSF 61-4 Listed by IAPMO R&T. Meets CA AB1953 GALVANIZED BLACK Size Inner/Master Ctn Qty List Price 90º ELBOW fiptxfipt BIM90L1/8 BIM90L1/4 BIM90L3/8 BIM90L1/2 UF BIM90L3/4 UF BIM90L1 UF BIM90L11/4 UF BIM90L11/2 UF BIM90L2 UF BIM90L21/2 UF BIM90L3 UF BIM90L4 UF BIM90L/GIM90L Series BIM90L/GIM90L Reducer Series U - UL Approval Size Inner/Master Ctn Qty List Price 90º ELBOW fiptxfipt 50/600 35/420 45/270 50/200 30/90 20/60 20/40 10/20 8/16 1/15 1/10 1/5 $ 2.05 1.94 1.94 1.46 2.21 3.12 5.07 6.64 11.40 24.79 37.00 78.62 90º ELBOW REDUCER fiptxfipt BIM90L3/8X1/8 BIM90L3/8X1/4 BIM90L1/4X1/8 BIM90L1/2X1/8 BIM90L1/2X1/4 UF BIM90L1/2x3/8 UF BIM90L3/4x1/2 BIM90L3/4X1/4 UF BIM90L3/4X3/8 UF BIM90L1X1/4 UF BIM90L1X3/8 UF BIM90L1X3/4 UF BIM90L11/4X1/2 UF BIM90L11/4x1 UF BIM90L11/4X3/4 UF BIM90L11/2x1 UF BIM90L11/2x11/4 UF BIM90L2x1 UF BIM90L2x11/4 UF BIM90L2x11/2 UF BIM90L21/2X3/4 F BIM90L21/2X1 F BIM90L21/2X11/4 F BIM90L21/2X11/2 UF BIM90L21/2X2 UF BIM90L3X2 UF ISO 9002 60/360 60/360 60/360 40/240 40/240 50/200 40/120 50/150 50/150 30/90 30/90 30/90 30/60 20/40 30/60 20/40 15/30 14/28 10/20 10/20 9/18 1/16 1/15 1/15 1/15 1/10 GIM90L1/8 GIM90L1/4 GIM90L3/8 GIM90L1/2 UF GIM90L3/4 UF GIM90L1 UF GIM90L11/4 UF GIM90L11/2 UF GIM90L2 UF GIM90L21/2 UF GIM90L3 UF GIM90L4 UF 50/600 35/420 45/270 50/200 30/90 20/60 20/40 10/20 8/16 1/15 1/10 1/5 $ 2.87 2.73 2.73 1.84 2.24 4.07 6.25 8.25 13.73 34.18 57.43 99.47 90º ELBOW REDUCER fiptxfipt 4.06 2.56 3.50 2.51 2.51 2.40 2.52 3.34 3.34 5.27 5.27 3.23 6.97 5.27 5.96 8.62 8.62 12.43 12.43 10.92 30.51 30.51 30.51 30.51 30.00 48.46 GIM90L3/8X1/8 GIM90L3/8X1/4 GIM90L1/4X1/8 GIM90L1/2X1/8 GIM90L1/2X1/4 UF GIM90L1/2 x 3/8 UF GIM90L3/4 x 1/2 UF GIM90L3/4X1/4 UF GIM90L3/4X3/8 UF GIM90L1X1/4 UF GIM90L1X3/8 UF GIM90L1 x 3/4 UF 60/360 60/360 60/360 40/240 40/240 50/200 40/120 50/150 50/150 30/90 30/90 30/90 5.24 3.70 4.15 3.45 3.45 3.45 3.34 4.40 4.40 6.93 6.93 4.27 GIM90L11/4 x 1 UF 20/40 7.10 GIM90L11/2 x 1 UF GIM90L11/2 x 11/4 UF GIM90L2 x 1 UF GIM90L2 x 11/4 UF GIM90L2 x 11/2 UF GIM90L21/2X3/4 F GIM90L21/2X1 F GIM90L21/2X11/4 F GIM90L21/2X11/2 UF GIM90L21/2X2 UF GIM90L3X2 UF 20/40 15/30 14/28 10/20 10/20 9/18 1/16 1/15 1/15 1/15 1/10 10.94 10.94 15.21 15.21 13.27 48.63 48.63 48.63 48.63 43.31 68.40 F - FM Approval TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 12.33 Malleable Iron Fittings - Imported GALVANIZED BLACK Inner/Master Ctn Qty Size List Price 45º ELBOW fiptxfipt BIM45L/GIM45L Series BIM45L1/8 BIM45L1/4 BIM45L3/8 BIM45L1/2 UF BIM45L3/4 UF BIM45L1 UF BIM45L11/4 UF BIM45L11/2 UF BIM45L2 UF BIM45L21/2 UF BIM45L3 UF BIM45L4 UF $ 2.96 3.06 2.79 2.40 2.93 3.74 6.52 8.07 12.12 34.20 44.44 86.27 90º STREET ELBOW fiptxmipt BIM90SL/GIM90SL Series 50/600 35/420 40/240 60/180 30/90 30/60 20/40 13/26 7/14 1/13 1/8 BIM45SL/GIM45SL Series BIMT/GIMT Series U - UL Approval F - FM Approval 6/14/11 12.34 GIM45L1/8 GIM45L1/4 GIM45L3/8 GIM45L1/2 UF GIM45L3/4 UF GIM45L1 UF GIM45L11/4 UF GIM45L11/2 UF GIM45L2 UF GIM45L21/2 UF GIM45L3 UF GIM45L4 UF 50/600 35/420 50/300 50/200 40/120 20/60 20/40 15/30 9/18 1/15 1/10 1/6 $ 4.11 3.65 3.59 2.81 3.93 4.49 8.19 9.76 14.59 49.37 71.74 120.29 GIM90SL1/8 GIM90SL1/4 GIM90SL3/8 GIM90SL1/2 UF GIM90SL3/4 UF GIM90SL1 UF GIM90SL11/4 UF GIM90SL11/2 UF GIM90SL2 UF GIM90SL21/2 UF GIM90SL3 UF 50/600 35/420 40/240 60/180 35/90 30/60 20/40 13/26 7/14 1/13 1/8 3.90 3.75 3.75 3.84 3.75 5.11 8.58 10.53 18.26 49.53 74.77 45º STREET ELBOW fiptxmipt 50/600 35/420 45/270 100/200 60/120 30/60 20/40 15/30 4.62 3.45 3.91 3.12 4.85 5.61 9.67 12.00 75/450 50/300 45/180 40/120 35/70 20/40 14/28 11/22 6/12 1/10 1/6 1/4 3.12 2.95 2.95 1.93 2.69 4.80 7.75 9.67 16.44 33.79 50.76 119.12 TEE fiptxfiptxfipt BIMT1/8 BIMT1/4 BIMT3/8 UF BIMT1/2 UF BIMT3/4 UF BIMT1 UF BIMT11/4 UF BIMT11/2 UF BIMT2 UF BIMT21/2 UF BIMT3 UF BIMT4 UF List Price 90º STREET ELBOW fiptxmipt 2.96 2.96 2.96 3.07 2.96 4.29 6.52 8.73 14.09 34.83 53.14 45º STREET ELBOW fiptxmipt BIM45SL1/8 BIM45SL1/4 BIM45SL3/8 BIM45SL1/2 UF BIM45SL3/4 UF BIM45SL1 UF BIM45SL11/4 UF BIM45SL11/2 UF Inner/Master Ctn Qty 45º ELBOW fiptxfipt 50/600 35/420 50/300 50/200 40/120 20/60 20/40 15/30 9/18 1/15 1/10 1/6 BIM90SL1/8 BIM90SL1/4 BIM90SL3/8 BIM90SL1/2 UF BIM90SL3/4 UF BIM90SL1 UF BIM90SL11/4 UF BIM90SL11/2 UF BIM90SL2 UF BIM90SL21/2 UF BIM90SL3 UF Size GIM45SL1/8 GIM45SL1/4 GIM45SL3/8 GIM45SL1/2 UF GIM45SL3/4 UF GIM45SL1 UF GIM45SL11/4 UF GIM45SL11/2 UF 50/600 35/420 45/270 100/200 60/120 30/60 20/40 15/30 5.37 4.58 5.22 4.00 6.54 8.07 12.15 14.67 75/450 50/300 45/180 40/120 35/70 20/40 14/28 11/22 6/12 1/10 1/6 1/4 4.07 3.54 3.54 2.17 3.67 5.98 9.48 11.84 19.76 53.03 62.20 147.06 TEE fiptxfiptxfipt GIMT1/8 GIMT1/4 GIMT3/8 GIMT1/2 UF GIMT3/4 UF GIMT1 UF GIMT11/4UF GIMT11/2 UF GIMT2 UF GIMT21/2 UF GIMT3 UF GIMT4 UF Carton Quantities subject to change. Contact Customer Service TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Malleable Iron Fittings - Imported BLACK BIMT/GIMT Reducer Series U - UL Approval GALVANIZED Inner/Master List Size Ctn Qty Price TEE REDUCER fiptxfiptxfipt Inner/Master List Size Ctn Qty Price TEE REDUCER fiptxfiptxfipt BIMT1/2X1/2X3/8 UF 45/180 BIMT3/4x1/2x1/2 UF 45/90 BIMT3/4X1/2x3/4 UF 45/90 BIMT3/4X3/4X1/4 UF 50/100 BIMT3/4x3/4x1/2 UF 45/90 BIMT3/4X3/4X1 UF 25/50 BIMT1X1/2X1/2 UF 30/60 BIMT1X1/2X3/4 UF 25/50 BIMT1X1/2X1 UF 30/60 BIMT1X3/4X1/2 UF 25/50 BIMT1x3/4x3/4 UF 25/50 BIMT1x3/4x1 UF 25/50 BIMT1x1x1/2 UF 35/70 BIMT1x1x3/4 UF 30/60 BIMT1X1X11/4 UF 18/36 BIMT11/4X1/2X11/4 UF 10/40 BIMT11/4X3/4X3/4 UF 20/40 BIMT11/4X3/4X1 UF 18/36 BIMT11/4x3/4x11/4 UF 18/36 BIMT11/4X1X1/2 UF 18/36 BIMT11/4X1X3/4 UF 18/36 BIMT11/4X1X1 UF 20/40 BIMT11/4X11/4X1/2 UF 20/40 BIMT11/4x11/4x3/4 UF 18/36 BIMT11/4x11/4x1 UF 18/36 BIMT11/4x1x11/4 UF 18/36 BIMT11/2X1/2X11/2 UF 13/26 BIMT11/2X3/4X3/4 F 13/26 BIMT11/2X3/4X11/4 F 11/22 BIMT11/2X3/4X11/2 UF 13/26 BIMT11/2X1X3/4 F 18/36 BIMT11/2X1X1 UF 15/30 BIMT11/2X1X11/2 UF 13/26 BIMT11/2X11/4X3/4 UF 11/22 BIMT11/2X11/4X1 UF 11/22 BIMT11/2X11/4X11/4 UF 11/22 BIMT11/2X11/2X1/2 UF 20/40 BIMT11/2x11/2x3/4 UF 15/30 BIMT11/2x11/2x1 UF 13/26 BIMT11/2X11/2X11/4 UF 13/26 BIMT2X1/2X2 UF 10/20 BIMT2X3/4X3/4 9/18 BIMT2X3/4X2 UF 9/18 BIMT2X1X2 UF 9/18 BIMT2X11/2X11/4 UF 8/16 BIMT2X11/2X11/2 UF 8/16 BIMT2X11/2X2 UF 8/16 BIMT2X2X1/2 UF 10/20 BIMT2X2X1 UF 9/18 BIMT2X2X11/4 UF 9/18 BIMT2X2X11/2 UF 9/18 GIMT1/2X1/2X3/8 GIMT3/4x1/2x1/2 UF GIMT3/4X3/4X1/4 UF GIMT3/4x3/4x1/2 UF GIMT3/4x1/2x3/4 UF GIMT3/4X3/4X1 UF 45/180 45/90 45/90 50/100 45/90 25/50 $ 4.50 5.24 4.77 4.62 5.24 7.99 GIMT1X1/2X3/4 UF GIMT1X1/2X1 UF GIMT1X3/4X1/2 UF GIMT1x3/4x3/4 UF GIMT1x3/4x1 UF GIMT1x1x1/2 UF GIMT1x1x3/4 UF GIMT1X1X11/4 UF GIMT11/4X1/2X11/4 UF GIMT11/4X3/4X3/4 UF GIMT11/4x3/4x1 UF GIMT11/4x3/4x11/4 UF GIMT11/4X1X1/2 UF GIMT11/4X1X3/4 UF GIMT11/4X1X1 UF 25/50 30/60 25/50 25/50 25/50 35/70 30/60 18/36 10/40 20/40 18/36 18/36 18/36 18/36 20/40 7.97 5.54 5.54 7.78 7.78 6.46 6.46 12.41 8.36 8.36 12.72 11.48 12.13 12.16 8.36 GIMT11/4x11/4x3/4 UF GIMT11/4x11/4x1 UF GIMT11/4x1x11/4 UF GIMT11/2X1/2X11/2 UF GIMT11/2X3/4X3/4 F GIMT11/2X3/4X11/4 F GIMT11/2X3/4X11/2 UF GIMT11/2X1X3/4 F GIMT11/2X1X1 UF GIMT11/2X1X11/2 UF GIMT11/2X11/4X3/4 UF GIMT11/2X11/4X1 UF GIMT11/2X11/4X11/4 UF GIMT11/2X11/2X1/2 UF GIMT11/2x11/2x3/4 UF GIMT11/2x11/2x1 UF GIMT11/2X11/2X11/4 UF GIMT2X1/2X2 UF GIMT2X3/4X3/4 GIMT2X3/4X2 UF GIMT2X1X2 UF GIMT2X11/2X11/4 UF GIMT2X11/2X11/2 UF GIMT2X11/2X2 UF 18/36 18/36 18/36 13/26 13/26 11/22 13/26 18/36 15/30 13/26 11/22 11/22 11/22 20/40 15/30 13/26 13/26 10/20 9/18 9/18 9/18 8/16 8/16 8/16 10.02 10.02 12.41 16.82 22.18 10.55 15.31 10.55 10.55 15.31 15.31 15.00 21.37 10.55 12.41 12.41 10.55 21.63 21.22 21.22 21.63 21.63 21.22 21.63 GIMT2X2X1 UF GIMT2X2X11/4 UF GIMT2X2X11/2 UF 9/18 9/18 9/18 17.96 21.10 21.10 $ 3.73 3.94 4.33 4.18 3.51 3.79 6.43 6.43 5.52 5.48 5.10 5.52 4.85 4.85 10.24 10.02 10.02 9.39 9.15 9.74 8.83 8.83 8.77 7.69 7.69 10.24 11.99 19.12 9.13 11.99 11.97 11.97 11.99 11.99 10.30 16.20 10.26 9.74 9.74 11.78 18.75 18.40 18.40 18.75 18.75 18.40 18.75 15.20 15.20 16.07 16.07 F - FM Approval TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 12.35 Malleable Iron Fittings - Imported BLACK Inner/Master List Ctn Qty Price Size BIMT/GIMT Reducer Series GALVANIZED BIMT21/2X21/2X1 UF BIMT21/2X21/2X11/2 UF BIMT21/2X21/2X2 UF BIMT3X3X3/4 UF BIMT3X3X1 UF BIMT3X3X11/4 UF BIMT3X3X11/2 UF BIMT3X3X2 UF BIMT3X3X21/2 UF 1/10 1/10 1/10 1/12 1/12 1/12 1/12 1/6 1/6 $39.90 39.90 39.97 54.38 53.40 54.38 53.40 53.40 61.03 25/150 25/100 20/60 20/40 4.89 6.52 8.91 18.25 60/180 80/240 60/120 45/90 30/60 16/32 9/18 8/16 5/10 1/6 1/4 1/2 7.10 6.03 6.16 6.97 8.49 10.49 17.02 21.05 34.83 61.48 91.66 187.10 street TEE fiptxfiptxmipt BIMST1/2 UF BIMST3/4 UF BIMST1 UF BIMST11/4 UF BIMST/GIMST Reducer Series BIMCR/GIMCR Series CROSS fipt BIMCR1/8 BIMCR1/4 BIMCR3/8 BIMCR1/2 UF BIMCR3/4 UF BIMCR1 UF BIMCR11/4 UF BIMCR11/2 UF BIMCR2 UF BIMCR21/2 UF BIMCR3 UF BIMCR4 UF Right Hand Coupling fiptxfipt BIMRHC/GIMRHC Series BIMRHC1/4 BIMRHC3/8 BIMRHC1/2 UF BIMRHC3/4 UF BIMRHC1 UF BIMRHC11/4 UF BIMRHC11/2 UF BIMRHC2 UF BIMRHC21/2 UF BIMRHC3 UF BIMRHC4 UF 40/480 50/300 60/240 50/150 25/75 32/64 18/36 12/24 1/16 1/12 1/7 2.49 2.49 1.99 2.31 3.52 4.55 6.07 8.86 24.11 32.59 65.01 Size Inner/Master List Ctn Qty Price GIMT21/2X21/2X1 UF GIMT21/2X21/2X11/2 UF GIMT21/2X21/2X2 UF GIMT3X3X3/4 UF GIMT3X3X1 UF GIMT3X3X11/4 UF GIMT3X3X11/2 UF GIMT3X3X2 UF GIMT3X3X21/2 UF 1/10 1/10 1/10 1/12 1/12 1/12 1/12 1/6 1/6 $30.78 30.78 57.56 81.60 78.08 79.61 78.08 78.08 87.71 street TEE fiptxfiptxmipt GIMST1/2 UF GIMST3/4 UF GIMST1 UF GIMST11/4 UF 25/150 25/100 20/60 20/40 6.97 7.62 12.10 25.01 60/180 80/240 60/120 45/90 30/60 16/32 9/18 8/16 5/10 1/6 1/4 1/2 9.05 9.05 9.05 9.07 11.07 15.25 22.10 26.84 51.15 97.60 131.48 265.63 CROSS fipt GIMCR1/8 GIMCR1/4 GIMCR3/8 GIMCR1/2 UF GIMCR3/4 UF GIMCR1 UF GIMCR11/4 UF GIMCR11/2 UF GIMCR2 UF GIMCR21/2 UF GIMCR3 UF GIMCR4 UF Right Hand Coupling fiptxfipt GIMRHC1/4 GIMRHC3/8 GIMRHC1/2 UF GIMRHC3/4 UF GIMRHC1 UF GIMRHC11/4 UF GIMRHC11/2 UF GIMRHC2 UF GIMRHC21/2 UF GIMRHC3 UF GIMRHC4 UF 40/480 50/300 60/240 50/150 25/75 32/64 18/36 12/24 1/16 1/12 1/7 3.18 3.18 2.56 2.94 4.85 6.60 7.55 11.07 33.74 45.10 95.79 U - UL Approval F - FM Approval 6/14/11 12.36 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Malleable Iron Fittings - Imported GALVANIZED BLACK Size Inner/Master List Ctn Qty Price REDUCING COUPLING fiptxfipt BIMRC1/4 x 1/8 BIMRC3/8 x 1/4 BIMRC1/2 x 1/4 U BIMRC1/2 x 3/8 UF BIMRC3/4X1/4 U BIMRC3/4 x 3/8 UF BIMRC3/4 x 1/2 UF BIMRC1X3/8 UF BIMRC1 x 1/2 UF BIMRC1 x 3/4 UF BIMRC11/4 x 1/2 UF BIMRC11/4 x 3/4 UF BIMRC11/4 x 1 UF BIMRC11/2 x 3/4 UF BIMRC11/2 x 1 UF BIMRC11/2 x 11/4 UF BIMRC2 x 1/2 UF BIMRC2 x 3/4 UF BIMRC2 x 1 UF BIMRC2 x 11/4 UF BIMRC2 x 11/2 UF BIMRC21/2X11/2 UF BIMRC21/2X2 UF BIMRC3X1 BIMRC3X11/4 BIMRC3X11/2 UF BIMRC3X2 UF BIMRC3X21/2 UF BIMRC4X2 UF BIMRC4X3 UF BIMRC/GIMRC Reducer Series 35/420 30/360 50/300 40/240 30/180 30/180 60/180 40/120 25/100 25/100 25/75 25/75 20/60 30/60 25/50 24/48 21/42 21/42 21/42 18/36 18/36 1/16 1/20 1/12 1/12 1/12 1/12 1/12 1/9 1/8 BIMHB/GIMHB Series U - UL Approval F - FM Approval TM 100/1200 100/600 150/600 100/600 100/600 50/300 50/300 50/300 50/300 50/200 50/200 50/200 50/200 50/200 30/120 30/120 30/120 30/120 30/120 Inner/Master List Ctn Qty Price REDUCING COUPLING fiptxfipt $ 2.18 2.18 1.94 1.87 2.47 2.47 2.10 3.88 3.30 3.30 4.78 4.15 4.15 6.85 6.07 5.22 9.88 8.69 8.22 8.69 7.58 22.62 19.38 30.79 30.79 30.22 25.09 30.22 60.57 60.57 HEX BUSHING miptxfipt BIMHB1/4X1/8 BIMHB3/8x1/4 BIMHB1/2x1/8 U BIMHB1/2x1/4 UF BIMHB1/2x3/8 UF BIMHB3/4X1/8 U BIMHB3/4x1/4 U BIMHB3/4x3/8 UF BIMHB3/4x1/2 UF BIMHB1X1/8 U BIMHB1X1/4 U BIMHB1X3/8 U BIMHB1x1/2 UF BIMHB1x3/4 UF BIMHB11/4X1/4 U BIMHB11/4X3/8 U BIMHB11/4x1/2 UF BIMHB11/4x3/4 UF BIMHB11/4x1 UF Size GIMRC1/4 x 1/8 GIMRC3/8 x 1/4 GIMRC1/2 x 1/4 U GIMRC1/2 x 3/8 UF GIMRC3/4X1/4 U GIMRC3/4 x 3/8 UF GIMRC3/4 x 1/2 UF GIMRC1X3/8 UF GIMRC1 x 1/2 UF GIMRC1 x 3/4 UF GIMRC11/4 x 1/2 UF GIMRC11/4 x 3/4 UF GIMRC11/4 x 1 UF GIMRC11/2 x 3/4 UF GIMRC11/2 x 1 UF GIMRC11/2 x 11/4 UF GIMRC2 x 1/2 UF GIMRC2 x 3/4 UF GIMRC2 x 1 UF GIMRC2 x 11/4 UF GIMRC2 x 11/2 UF GIMRC21/2X11/2 UF GIMRC21/2X2 UF GIMRC3X1 GIMRC3X11/4 GIMRC3X11/2 UF GIMRC3X2 UF GIMRC3X21/2 UF GIMRC4X2 UF GIMRC4X3 UF 35/240 30/360 50/300 40/240 30/180 30/180 60/180 40/120 25/100 25/100 25/75 25/75 20/60 30/60 25/50 24/48 21/42 21/42 21/42 18/36 18/36 1/16 1/20 1/12 1/12 1/12 1/12 1/12 1/9 1/8 $ 2.71 2.71 2.44 2.31 3.06 3.06 2.71 5.52 4.50 4.15 7.08 5.73 5.73 7.33 7.33 6.97 11.99 11.99 10.05 8.68 8.13 31.64 31.08 42.08 42.08 41.27 38.98 41.34 89.29 89.29 HEX BUSHING miptxfipt 2.64 2.64 2.64 2.64 2.64 2.57 2.54 2.57 2.40 2.96 3.21 3.26 2.49 2.49 4.13 3.66 3.51 3.19 3.19 GIMHB1/4X1/8 GIMHB3/8X1/4 GIMHB1/2x1/8 U GIMHB1/2x1/4 UF GIMHB1/2x3/8 UF GIMHB3/4X1/8 U GIMHB3/4x1/4 U GIMHB3/4x3/8 UF GIMHB3/4x1/2 UF GIMHB1X1/8 U GIMHB1X1/4 U GIMHB1X3/8 U GIMHB1x1/2 UF GIMHB1x3/4 UF GIMHB11/4X1/4 U GIMHB11/4X3/8 U GIMHB11/4x1/2 GIMHB11/4x3/4 UF GIMHB11/4x1 UF 100/1200 100/600 150/600 100/600 100/600 50/300 50/300 50/300 50/600 50/200 50/200 50/200 50/200 50/200 30/120 30/120 30/120 30/120 30/120 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 3.83 3.83 3.83 3.83 3.83 4.40 3.95 4.40 3.54 4.14 4.70 7.32 4.24 3.99 6.77 6.77 5.93 5.40 5.40 6/14/11 12.37 Malleable Iron Fittings - Imported GALVANIZED BLACK Inner/Master List Ctn Qty Price Size HEX BUSHING Cont. miptxfipt BIMHB/GIMHB Series BIMHB11/2X1/4 U BIMHB11/2x1/2 UF BIMHB11/2x3/4 UF BIMHB11/2x1 UF BIMHB11/2x11/4 UF BIMHB2X1/4 U BIMHB2x1/2 UF BIMHB2x3/4 UF BIMHB2x1 UF BIMHB2x11/4 UF BIMHB2x11/2 UF BIMHB21/2X3/4 UF BIMHB21/2X1 UF BIMHB21/2X11/4 UF BIMHB21/2X11/2 UF BIMHB21/2X2 UF BIMHB3X3/4 UF BIMHB3X1 UF BIMHB3X11/4 UF BIMHB3X11/2 UF BIMHB3X2 UF BIMHB3X21/2 UF BIMHB31/2X3 UF BIMHB4X3/4 F BIMHB4X1 F BIMHB4X11/4 UF BIMHB4X11/2 UF BIMHB4X2 F BIMHB4X21/2 F BIMHB4X3 UF F - FM Approval 6/14/11 12.38 List Price $ 4.86 4.00 4.00 3.51 4.00 6.85 6.07 4.86 4.55 4.55 5.07 8.25 8.25 8.25 7.68 7.65 11.40 11.40 11.40 11.63 13.61 13.61 25.53 23.12 23.12 23.12 23.12 20.16 22.71 20.16 50/600 50/300 40/240 35/140 25/100 25/75 18/54 1/30 1/20 1/14 1/2 1.62 1.47 1.99 2.40 3.12 4.27 5.57 13.86 20.60 32.16 128.50 GIMHB11/2X1/4 U GIMHB11/2x1/2 UF GIMHB11/2x3/4 UF GIMHB11/2x1 UF GIMHB11/2X11/4 UF GIMHB2X1/4 U GIMHB2 x 1/2 UF GIMHB2 x 3/4 UF GIMHB2 x 1 F GIMHB2 x 11/4 UF GIMHB2 x 11/2 UF GIMHB21/2X3/4 UF GIMHB21/2X1 UF GIMHB21/2X11/4 UF GIMHB21/2X11/2 UF GIMHB21/2X2 UF GIMHB3X3/4 UF GIMHB3X1 UF GIMHB3X11/4 UF GIMHB3X11/2 UF GIMHB3X2 UF GIMHB3X21/2 UF GIMHB31/2X3 UF GIMHB4X3/4 F GIMHB4X1 F GIMHB4X11/4 UF GIMHB4X11/2 UF GIMHB4X2 F GIMHB4X21/2 F GIMHB4X3 UF 25/75 25/75 25/75 25/75 25/75 20/60 20/60 20/60 20/60 20/60 20/60 1/30 1/24 1/24 1/28 1/32 1/20 1/20 1/20 1/20 1/20 1/20 1/10 1/10 1/10 1/10 1/10 1/10 1/10 1/10 $ 8.59 7.84 7.84 7.06 6.52 9.85 9.85 9.09 8.64 8.64 7.55 14.19 14.19 14.19 13.87 12.36 18.72 18.72 18.72 18.36 16.64 17.63 41.40 39.27 39.27 39.27 39.27 34.65 39.27 36.63 50/600 50/300 40/240 35/140 25/100 25/75 18/54 1/30 1/20 1/14 1/2 2.44 1.87 2.69 2.96 4.38 5.52 6.97 22.20 26.91 53.43 194.45 CAP fipt BIMCA3/8 BIMCA1/2 UF BIMCA3/4 UF BIMCA1 UF BIMCA11/4 UF BIMCA11/2 UF BIMCA2 UF BIMCA21/2 UF BIMCA3 UF BIMCA4 UF BIMCA6 UF ☺ U - UL Approval Inner/Master Ctn Qty HEX BUSHING Cont. miptxfipt 25/75 25/75 25/75 25/75 25/75 20/60 20/60 20/60 20/60 20/60 20/60 1/30 1/24 1/24 1/28 1/32 1/20 1/20 1/20 1/20 1/20 1/20 1/10 1/10 1/10 1/10 1/10 1/10 1/10 1/10 CAP fipt BIMCA/GIMCA Series Size GIMCA3/8 GIMCA1/2 UF GIMCA3/4 UF GIMCA1 UF GIMCA11/4 UF GIMCA11/2 UF GIMCA2 UF GIMCA21/2 UF GIMCA3 UF GIMCA4 UF GIMCA6 UF Steel, Made in USA Carton Quantities subject to change. Contact Customer Service TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Malleable Iron Fittings - Imported GALVANIZED BLACK Size Inner/Master List Ctn Qty Price Square Head Plug mipt BIMP1/8 ☺ 100 BIMP1/4 ☺ 100 BIMP3/8 ☺ 45/540 BIMP1/2 UF ☺ 40/480 BIMP3/4 UF ☺ 25/300 BIMP1 UF BIMP11/4 UF BIMP11/2 UF BIMP2 UF BIMP21/2 UF BIMP3 UF BIMP4 F BIMP5 UF BIMP6 UF BIMP/GIMP Series 40/160 25/100 24/72 15/45 1/40 1/30 1/8 1/4 1/2 $ 0.66 0.66 0.99 1.03 1.11 1.61 2.39 2.81 3.97 7.27 9.96 20.88 44.95 55.47 Unions, 150 lbs UL Listed fiptxfipt BIMU150-1/8 BIMU150-1/4 BIMU150-3/8 BIMU150-1/2 UF BIMU150-3/4 UF BIMU150-1 UF BIMU150-11/4 UF BIMU150-11/2 UF BIMU150-2 UF BIMU150-21/2 UF BIMU150-3 UF BIMU/GIMU Series BIMFF/GIMFF Series GIMP1 UF GIMP11/4 UF GIMP11/2 UF GIMP2 UF GIMP21/2 UF GIMP3 UF GIMP4 F GIMP5 UF GIMP6 UF 40/160 25/100 24/72 15/45 1/40 1/30 1/8 1/4 1/2 List Price $ 1.00 1.00 1.31 1.44 1.48 2.48 4.15 5.63 7.08 13.91 19.73 40.89 78.38 81.18 Unions, 150 lbs UL Listed fiptxfipt $ 9.66 9.18 6.21 5.93 8.91 8.86 11.75 18.60 27.87 54.25 65.88 30/180 50/200 25/100 20/80 20/60 15/45 12/36 8/24 5.36 5.36 5.36 5.73 7.43 10.22 11.92 14.46 GIMFF1/4 GIMFF3/8 GIMFF1/2 F GIMFF3/4 F GIMFF1 F GIMFF11/4 F GIMFF11/2 F GIMFF2 F 50/300 60/180 30/60 30/60 1/35 15/30 4.29 6.31 8.78 10.98 11.75 13.77 GIMEP1/2 F GIMEP3/4 F GIMEP1 F GIMEP11/4 F GIMEP11/2 F GIMEP2 F GIMU150-1/8 GIMU150-1/4 GIMU150-3/8 GIMU150-1/2 UF GIMU150-3/4 UF GIMU150-1 UF GIMU150-11/4 UF GIMU150-11/2 UF GIMU150-2 UF GIMU150-21/2 UF GIMU150-3 UF 30/180 30/180 35/140 30/120 25/75 20/40 18/36 12/24 8/16 1/10 1/5 $ 11.51 11.15 9.03 7.08 9.03 10.65 15.00 18.50 28.18 47.80 101.48 30/180 50/200 25/100 20/80 20/60 15/45 12/36 8/24 11.44 11.44 11.44 12.81 14.08 16.04 19.99 26.33 50/300 60/180 30/60 30/60 1/35 15/30 6.07 9.07 11.35 13.82 16.16 20.88 FLOOR FLANGE fipt EXTENSION PIECE BIMEP1/2 F BIMEP3/4 F BIMEP1 F BIMEP11/4 F BIMEP11/2 F BIMEP2 F Inner/Master Ctn Qty Square Head Plug mipt GIMP1/8 ☺ 100 GIMP1/4 ☺ 100 GIMP3/8 ☺ 45/540 GIMP1/2 UF ☺ 40/480 GIMP3/4 UF ☺ 25/300 30 /180 30/180 35/140 30/120 25/75 20/40 18/36 12/24 8/16 1/10 1/5 FLOOR FLANGE fipt BIMFF1/4 BIMFF3/8 BIMFF1/2 F BIMFF3/4 F BIMFF1 F BIMFF11/4 F BIMFF11/2 F BIMFF2 F Size EXTENSION PIECE BIMEP/GIMEP Series U - UL Approval Carton Quantities subject to change. Contact Customer Service F - FM Approval TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 12.39 4/2009 12.40 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Malleable Iron Fittings - Domestic Domestic Malleable Iron Fitting Features: Malleable Iron Fitting Specifications: • • • • Material: Dimensions: • Class 150 malleable iron pipe fittings Suitable for water, steam, air, gas and oil All fittings are air pressure tested Working pressure: Max: 300 psi @ -20°F to 150°F. Min 150 psi @ 366°F Made in USA Pressure ratings: Coatings: GALVANIZED BLACK Size Ctn Qty List Price 35/210 30/180 30/180 50/200 35/140 20/80 20/40 8/32 8/16 12 5 4 $ 6.00 5.86 5.86 4.06 4.90 8.51 14.03 18.46 31.82 70.88 103.72 222.79 90º ELBOW fiptxfipt BM90L1/8 BM90L1/4 BM90L3/8 BM90L1/2 BM90L3/4 BM90L1 BM90L11/4 BM90L11/2 BM90L2 BM90L21/2 BM90L3 BM90L4 BM90L/GM90L Series BM90L/GM90L Reducer Series Size Ctn Qty List Price 90º ELBOW fiptxfipt 90º ELBOW REDUCER fiptxfipt BM90L3/8 x 1/4 BM90L1/2 x 1/4 BM90L1/2 x 3/8 BM90L3/4 x 3/8 BM90L3/4 x 1/2 BM90L1 x 1/2 BM90L1 x 3/4 BM90L11/4 x 3/4 BM90L11/4 x 1 BM90L11/2 x 1/2 BM90L11/2 x 3/4 BM90L11/2 x 1 BM90L11/2 x 11/4 BM90L2 x 1/2 BM90L2 x 3/4 BM90L2 x 1 BM90L2 x 11/4 BM90L2 x 11/2 BM90L21/2 x 11/2 ASTM A197 ANSI/ASME B16.3 ANSI/ASME B1.20.1 ANSI/ASME B16.3 ASTM A153, A165 25/150 30/180 50/200 30/180 30/120 25/100 20/80 15/60 10/40 12/48 12/48 10/40 15/30 10/40 15/30 12/24 10/20 10/20 12 GM90L1/8 GM90L1/4 GM90L3/8 GM90L1/2 GM90L3/4 GM90L1 GM90L11/4 GM90L11/2 GM90L2 GM90L21/2 GM90L3 GM90L4 35/210 30/180 30/180 50/200 35/140 20/80 20/40 8/32 8/16 12 5 4 $ 9.29 8.48 8.48 5.46 6.71 12.42 19.63 25.62 41.98 109.85 181.11 319.43 90º ELBOW REDUCER fiptxfipt 8.24 7.95 7.74 7.95 7.95 11.03 10.23 19.16 17.18 26.57 27.73 24.24 24.24 33.53 42.30 39.90 39.90 35.10 102.02 GM90L3/8 x 1/4 GM90L1/2 x 1/4 GM90L1/2 x 3/8 GM90L3/4 x 3/8 GM90L3/4 x 1/2 GM90L1 x 1/2 GM90L1 x 3/4 GM90L11/4 x 3/4 GM90L11/4 x 1 GM90L11/2 x 1/2 GM90L11/2 x 3/4 GM90L11/2 x 1 GM90L11/2 x 11/4 GM90L2 x 1/2 GM90L2 x 3/4 GM90L2 x 1 GM90L2 x 11/4 GM90L2 x 11/2 GM90L21/2 x 11/2 GM90L3 x 2 25/150 30/180 50/200 30/180 30/120 25/100 20/80 15/60 10/40 12/48 12/48 10/40 15/30 10/40 15/30 12/24 10/20 10/20 12 8 13.58 11.71 10.05 16.09 11.66 15.89 14.97 30.16 25.10 34.66 40.12 40.12 40.12 44.87 56.88 55.75 53.74 46.88 177.02 250.82 Case quantities required please for fittings through 2” TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 12.41 Malleable Iron Fittings - Domestic GALVANIZED BLACK Size Ctn Qty List Price 35/210 40/240 50/200 40/160 25/100 10/40 10/40 8/16 15 8 4 $ 8.83 8.83 6.70 8.29 10.44 18.47 22.84 34.54 99.95 129.83 254.58 45º ELBOW fiptxfipt BM45L/GM45L Series BM45L1/4 BM45L3/8 BM45L1/2 BM45L3/4 BM45L1 BM45L11/4 BM45L11/2 BM45L2 BM45L21/2 BM45L3 BM45L4 BM90SL/GM90SL Series 40/240 30/180 30/180 50/200 35/140 20/80 15/30 12/24 16/32 8/16 8 8 BM45SL/GM45SL Series 6/14/11 12.42 GM45L1/4 GM45L3/8 GM45L1/2 GM45L3/4 GM45L1 GM45L11/4 GM45L11/2 GM45L2 GM45L21/2 GM45L3 GM45L4 35/210 40/240 50/200 40/160 25/100 10/40 10/40 8/16 15 8 4 $ 11.57 12.92 8.64 12.42 14.03 26.21 30.78 45.55 158.50 230.53 386.45 GM90SL1/8 GM90SL1/4 GM90SL3/8 GM90SL1/2 GM90SL3/4 GM90SL1 GM90SL11/4 GM90SL11/2 GM90SL11/2 x 11/4 GM90SL2 GM90SL21/2 GM90SL3 40/240 30/180 30/180 50/200 35/140 20/80 15/30 12/24 16/32 8/16 8 8 12.14 11.75 11.75 12.01 12.01 16.06 26.96 33.84 55.08 57.06 165.05 240.20 45º STREET ELBOW fiptxfipt 30/180 30/180 50/200 40/160 25/100 25/50 15/30 10/20 13.60 11.48 9.37 14.15 16.48 28.49 36.74 61.77 35/210 35/210 30/180 30/120 20/80 12/48 15/30 10/20 15 8 6 3 9.04 8.51 8.51 5.42 7.78 13.33 21.60 26.85 45.78 98.70 145.39 351.40 GM45SL1/8 GM45SL3/8 GM45SL1/2 GM45SL3/4 GM45SL1 GM45SL11/4 GM45SL11/2 GM45SL2 30/180 30/180 50/200 40/160 25/100 25/50 15/30 10/20 17.68 17.42 13.20 20.95 26.84 40.28 48.78 80.34 35/210 35/210 30/180 30/120 20/80 12/48 15/30 10/20 15 8 6 3 13.14 11.08 11.08 7.08 11.66 18.86 29.93 37.21 60.47 170.27 199.68 472.35 TEE fiptxfiptxfipt TEE fiptxfiptxfipt BMT/GMT Series List Price 90º STREET ELBOW fiptxfipt 8.65 8.65 8.65 8.40 8.40 11.89 18.47 24.71 44.87 40.15 101.77 155.35 45º STREET ELBOW fiptxfipt BM45SL1/8 BM45SL3/8 BM45SL1/2 BM45SL3/4 BM45SL1 BM45SL11/4 BM45SL11/2 BM45SL2 Ctn Qty 45º ELBOW fiptxfipt 90º STREET ELBOW fiptxfipt BM90SL1/8 BM90SL1/4 BM90SL3/8 BM90SL1/2 BM90SL3/4 BM90SL1 BM90SL11/4 BM90SL11/2 BM90SL11/2 x 11/4 BM90SL2 BM90SL21/2 BM90SL3 Size BMT1/8 BMT1/4 BMT3/8 BMT1/2 BMT3/4 BMT1 BMT11/4 BMT11/2 BMT2 BMT21/2 BMT3 BMT4 TM GMT1/8 GMT1/4 GMT3/8 GMT1/2 GMT3/4 GMT1 GMT11/4 GMT11/2 GMT2 GMT21/2 GMT3 GMT4 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Malleable Iron Fittings - Domestic BLACK GALVANIZED Size Ctn Qty List Price TEE Reducing fiptxfiptxfipt BMT1/2 x 1/2 x 1/4 25/100 BMT1/2 x 1/2 x 3/4 30/120 BMT3/4 x 1/2 x 1/2 30/120 BMT3/4 x 3/4 x 1/4 30/120 BMT3/4 x 3/4 x 3/8 30/120 BMT3/4 x 3/4 x 1/2 25/100 BMT3/4 x 1/2 x 3/4 20/80 BMT3/4 x 3/4 x 1 15/60 BMT1 x 1/2 x 1/2 20/80 BMT1 x 1/2 x 3/4 20/80 BMT1 x 1/2 x 1 15/60 BMT1 x 3/4x 1/2 20/40 BMT1 x 3/4 x 3/4 20/40 BMT1 x 3/4 x 1 20/40 BMT1 x 1 x 1/4 20/80 BMT1 x 1 x 1/2 15/60 BMT1x1x3/4 25/50 BMT1x 1 x 11/4 15/30 BMT11/4 x 1/2 x 11/4 10/40 BMT11/4 x 3/4 x 3/4 10/40 BMT11/4 x 3/4 x 1 10/40 BMT11/4 x 3/4 x 11/4 15/30 BMT11/4 x 1 x 1 15/30 BMT11/4 x 11/4 x 1/2 15/30 BMT11/4 x 11/4 x 3/4 12/24 BMT11/4 x 11/4 x 1 14/28 BMT11/4 x 1 x 11/4 15/30 BMT11/2 x 1/2 x 11/2 10/20 BMT11/2 x 3/4 x 3/4 10/40 BMT11/2 x 3/4 x 11/2 10/20 BMT11/2 x 1 x 11/2 10/20 BMT11/2 x 11/4 x 3/4 10/20 BMT11/2 x 11/4 x 1 8/16 BMT11/2 x 11/4 x 11/4 10/20 BMT11/2 x 11/4 x 11/2 10/20 BMT11/2 x 11/2 x 1/2 8/32 BMT11/2 x 11/2 x 3/4 10/20 BMT11/2 x 11/2 x 1 10/20 BMT11/2 x 11/2 x 11/4 8/40 BMT2 x 1/2 x 2 8/16 BMT2 x 3/4 x 2 8/16 BMT2 x 1 x 2 8/16 BMT2 x 2 x 1/2 10/20 BMT2 x 2 x 3/4 10/20 BMT2 x 2 x 1 10/20 BMT2 x 2 x 11/4 8/16 BMT2 x 2 x 11/2 8/16 BMT2 x 11/4 x 11/4 8/16 BMT2 x 11/2x11/4 8/16 BMT2 x 11/2 x 11/2 8/16 BMT21/2 x 21/2 x 2 12 BMT/GMT Reducer Series TM $ 9.24 13.91 12.37 13.39 14.79 12.05 13.91 18.34 17.32 20.66 17.32 17.41 16.09 17.65 19.25 15.20 15.20 33.66 32.27 32.27 29.88 29.24 28.38 27.71 24.29 26.33 34.07 38.56 64.63 38.56 38.56 38.56 33.10 51.73 58.14 32.46 30.66 30.66 37.92 60.12 59.08 60.12 48.97 48.05 48.05 51.73 51.73 60.12 60.23 59.08 128.40 Size Ctn Qty List Price TEE Reducing fiptxfiptxfipt GMT1/2 x 1/2 x 3/8 35/140 $ 16.44 GMT3/4 x 1/2 x 1/2 GMT3/4 x 3/4 x 1/4 30/120 30/120 19.40 17.33 GMT3/4 x 3/4 x 1/2 GMT3/4 x 1/2 x 3/4 GMT3/4 x 3/4 x 1 GMT1x1/4x1 GMT1 x 1/2 x 1/2 GMT1 x 1/2 x 3/8 GMT1 x 1/2 x 1 GMT1 x 3/4x 1/2 GMT1 x 3/4 x 3/4 GMT1 x 3/4 x 1 GMT1 x 1 x 1/2 GMT1x1x3/4 GMT1x 1 x 11/4 GMT11/4 x 1/2 x 11/4 GMT11/4 x 3/4 x 3/4 GMT11/4 x 3/4 x 1 GMT11/4 x 3/4 x 11/4 GMT11/4 x 1 x 1 GMT11/4 x 11/4 x 1/2 GMT11/4 x 11/4 x 3/4 GMT11/4 x 11/4 x 1 GMT11/4 x 1 x 11/4 GMT11/2 x 1/2 x 11/2 GMT11/2 x 3/4 x 3/4 GMT11/2 x 3/4 x 11/2 GMT11/2 x 1 x 11/2 GMT11/2 x 11/4 x 3/4 GMT11/2 x 11/4 x 1 GMT11/2 x 11/4 x 11/4 GMT11/2 x 11/4 x 11/2 GMT11/2 x 11/2 x 1/2 GMT11/2 x 11/2 x 3/4 GMT11/2 x 11/2 x 1 GMT11/2 x 11/2 x 11/4 GMT2 x 1/2 x 2 GMT2 x 3/4 x 2 GMT2 x 1 x 2 GMT2 x 2 x 1/2 GMT2 x 2 x 3/4 GMT2 x 2 x 1 GMT2 x 2 x 11/4 GMT2 x 2 x 11/2 GMT2 x 11/4 x 11/4 GMT2 x 11/2x11/4 GMT2 x 11/2 x 11/2 GMT21/2 x 21/2 x 2 25/100 20/80 15/60 15/80 20/80 20/80 15/60 20/40 20/40 20/40 15/60 25/50 15/30 10/40 10/40 10/40 15/30 15/30 15/30 12/24 14/28 15/30 10/20 10/40 10/20 10/20 10/20 8/16 10/20 10/20 8/32 10/20 10/20 8/40 8/16 8/16 8/16 10/20 10/20 10/20 8/16 8/16 8/16 8/16 8/16 12 16.23 18.51 27.92 29.48 28.45 29.06 28.45 28.45 27.44 28.45 22.78 22.78 46.04 44.77 48.72 46.31 42.00 42.87 37.34 35.33 35.33 45.33 61.56 81.94 56.14 56.14 56.14 53.06 77.82 77.82 46.12 43.64 43.64 54.64 79.37 77.86 79.37 70.99 63.72 62.53 75.02 75.05 79.37 79.37 77.86 210.91 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 12.43 Malleable Iron Fittings - Domestic GALVANIZED BLACK Size Ctn Qty List Price BMT/GMT Reducer Series 8 8 8 8 8 8 $ 174.84 172.32 181.56 178.28 171.49 203.72 20/80 12/24 10/20 19.85 26.23 43.14 30/120 15/60 15/30 12/24 8/16 8 20.52 24.83 30.59 49.65 61.54 101.17 BMCR1/2 BMCR3/4 BMCR1 BMCR11/4 BMCR11/2 BMCR2 BMRHC/GMRHC Series BMRHC1/4 BMRHC3/8 BMRHC1/2 BMRHC3/4 BMRHC1 BMRHC11/4 BMRHC11/2 BMRHC2 BMRHC21/2 BMRHC3 BMRHC4 35/210 40/240 40/240 40/160 25/100 15/60 10/40 8/32 8 8 4 REDUCING COUPLING fiptxfipt BMRC1/4 x 1/8 ☺ 25/150 BMRHC/GMRHC Reducer Series BMRC3/8 x 1/4 BMRC1/2 x 1/4 BMRC1/2 x 3/8 BMRC3/4 x 1/4 BMRC3/4 x 3/8 BMRC3/4 x 1/2 BMRC1 x 3/8 BMRC1 x 1/2 BMRC1 x 3/4 BMRC11/4 x 1/2 BMRC11/4 x 3/4 BMRC11/4 x 1 ☺ 6/14/11 12.44 8 8 8 8 8 8 $ 385.03 275.98 291.88 286.30 275.98 321.44 GMST3/4 GMST1 GMST11/4 20/80 12/24 10/20 25.39 40.14 66.94 25/150 25/150 30/180 35/210 35/210 50/200 30/120 30/120 25/100 15/60 15/60 15/60 GMCR1/2 GMCR3/4 GMCR1 GMCR11/4 GMCR11/2 GMCR2 30/120 15/60 15/30 12/24 8/16 8 29.12 35.48 48.96 73.60 86.10 163.10 Right Hand Coupling fiptxfipt Right Hand Coupling fiptxfipt BMCR/GMCR Series GMT3 x 3 x 3/4 GMT3 x 3 x 1 GMT3 x 3 x 11/4 GMT3 x 3 x 11/2 GMT3 x 3 x 2 GMT3 x 3 x 21/2 CROSS fipt CROSS fipt BMST/GSMT Series List Price STREET TEE fiptxmiptxfipt STREET TEE fiptxmiptxfipt BMST3/4 BMST1 BMST11/4 Ctn Qty TEE Reducing, Cont. fiptxfiptxfipt TEE Reducing, Cont. fiptxfiptxfipt BMT3 x 3 x 3/4 BMT3 x 3 x 1 BMT3 x 3 x 11/4 BMT3 x 3 x 11/2 BMT3 x 3 x 2 BMT3 x 3 x 21/2 Size 7.28 7.28 5.61 6.58 9.84 15.10 17.22 25.52 70.43 95.21 191.75 7.67 7.67 6.97 6.59 8.80 8.80 7.37 14.45 11.75 11.48 17.32 14.76 14.76 GMRHC1/4 GMRHC3/8 GMRHC1/2 GMRHC3/4 GMRHC1 GMRHC11/4 GMRHC11/2 GMRHC2 GMRHC21/2 GMRHC3 GMRHC4 35/210 40/240 40/240 40/160 25/100 15/60 10/40 8/32 8 8 4 REDUCING COUPLING fiptxfipt GMRC1/4 x 1/8 ☺ 25/150 GMRC3/8 x 1/4 GMRC1/2 x 1/4 GMRC1/2 x 3/8 GMRC3/4 x 1/4 GMRC3/4 x 3/8 GMRC3/4 x 1/2 GMRC1 x 3/8 GMRC1 x 1/2 GMRC1 x 3/4 GMRC11/4 x 1/2 GMRC11/4 x 3/4 GMRC11/4 x 1 25/150 25/150 30/180 35/210 35/210 50/200 30/120 30/120 25/100 15/60 15/60 15/60 10.13 10.47 8.00 9.22 15.11 12.31 24.22 35.41 108.40 144.87 313.93 10.39 10.39 9.33 9.70 11.78 11.78 10.38 22.46 17.29 16.06 28.70 22.37 21.93 Steel TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Malleable Iron Fittings - Domestic BMRHC/GMRHC Reducer Series BLACK GALVANIZED Size Ctn Qty List Price REDUCING COUPLING - con’t fiptxfipt Size Ctn Qty List Price REDUCING COUPLING - con’t fiptxfipt BMRC11/2 x 1/2 BMRC11/2 x 3/4 BMRC11/2 x 1 BMRC11/2 x 11/4 BMRC2 x 1/2 BMRC2 x 3/4 BMRC2 x 1 BMRC2 x 11/4 BMRC2 x 11/2 BMRC21/2 x 11/2 BMRC21/2 x 2 BMRC3 x 1 BMRC3x 11/4 BMRC3 x 11/2 BMRC3 x 2 BMRC3 x 21/2 BMRC4 x 2 BMRC4 x 3 GMRC11/2 x 1/2 GMRC11/2 x 3/4 GMRC11/2 x 1 GMRC11/2 x 11/4 GMRC2 x 1/2 GMRC2 x 3/4 GMRC2 x 1 GMRC2 x 11/4 GMRC2 x 11/2 GMRC21/2 x 11/2 GMRC21/2 x 2 GMRC3 x 1 GMRC3 x 11/4 GMRC3 x 11/2 GMRC3 x 2 GMRC3 x 21/2 GMRC4 x 2 GMRC4 x 3 15/60 10/40 10/40 10/40 8/32 8/32 15/30 10/20 10/20 10 10 8 8 8 8 8 4 4 HEX BUSHING miptxfipt BMHB1/4 x 1/8 ☺ 25/150 BMHB3/8 x 1/8 ☺ 25/150 BMHB3/8 x 1/4 ☺ 25/150 BMHB1/2 x 1/8 ☺ 25/150 BMHB1/2 x 1/4 ☺ 25/150 BMHB1/2 x 3/8 ☺ 25/150 BMHB/GMHB Series ☺ Steel TM $ 22.03 24.83 21.64 18.66 35.87 30.97 29.26 30.97 27.04 73.75 62.16 98.96 100.80 97.16 80.46 93.95 194.75 194.75 BMHB3/4 x 1/8 BMHB3/4 x 1/4 BMHB3/4 x 3/8 BMHB3/4 x 1/2 BMHB1 x 1/8 BMHB1 x 1/4 BMHB1 x 3/8 BMHB1 x 1/2 BMHB1 x 3/4 BMHB11/4 x 1/8 BMHB11/4x1/4 25/150 25/150 25/150 25/150 25/150 25/150 25/150 25/150 25/150 25/150 25/150 7.61 7.61 7.61 7.61 7.61 7.61 7.52 7.14 7.32 6.59 10.70 9.24 9.50 7.03 6.92 12.88 13.28 BMHB11/4 x 1/2 BMHB11/4 x 3/4 BMHB11/4 x 1 BMHB11/2 x 1/4 BMHB11/2 x 1/2 BMHB11/2 x 3/4 BMHB11/2 x 1 BMHB11/2 x 11/4 BMHB2x 1/4 BMHB2 x 1/2 BMHB2 x 3/4 BMHB2 x 1 BMHB2 x 11/4 BMHB2 x 11/2 25/150 25/150 25/150 15/150 30/120 30/120 30/120 30/120 20/80 20/80 20/80 20/80 20/80 20/80 10.28 9.04 9.04 15.47 11.76 11.76 10.32 11.48 16.68 18.68 14.77 14.12 14.12 14.44 15/60 10/40 10/40 10/40 8/32 8/32 15/30 10/20 10/20 10 10 8 8 8 8 8 4 4 HEX BUSHING miptxfipt GMHB1/4 x 1/8 ☺ 25/150 GMHB3/8 x 1/8 ☺ 25/150 GMHB3/8 x 1/4 ☺ 25/150 GMHB1/2 x 1/8 ☺ 25/150 GMHB1/2 x 1/4 ☺ 25/150 GMHB1/2 x 3/8 ☺ 25/150 GMHB3/4 x 1/8 GMHB3/4 x 1/4 GMHB3/4 x 3/8 GMHB3/4 x 1/2 GMHB1 x 1/8 GMHB1 x 1/4 GMHB1 x 3/8 GMHB1 x 1/2 GMHB1 x 3/4 GMHB11/4 x 1/8 GMHB11/4 X 1/4 GMHB11/4 X 3/8 GMHB11/4 x 1/2 GMHB11/4 x 3/4 GMHB11/4 x 1 GMHB11/2 x 1/4 GMHB11/2 x 1/2 GMHB11/2 x 3/4 GMHB11/2 x 1 GMHB11/2 x 11/4 GMHB2x 1/4 GMHB2 x 1/2 GMHB2 x 3/4 GMHB2 x 1 GMHB2 x 11/4 GMHB2 x 11/2 25/150 25/150 25/150 25/150 25/150 25/150 25/150 25/150 25/150 25/150 25/150 25/150 25/150 25/150 25/150 15/120 30/120 30/120 30/120 30/120 20/80 20/80 20/80 20/80 20/80 20/80 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 $ 33.84 28.84 28.84 27.24 48.86 43.31 39.34 41.59 36.20 116.04 109.76 154.18 154.18 145.86 137.85 140.76 315.60 315.60 12.14 12.14 12.14 12.14 12.14 12.14 13.20 12.84 14.36 10.99 17.66 15.00 15.08 13.58 12.63 22.09 22.63 22.63 19.28 17.02 17.02 30.48 23.70 23.70 21.41 20.52 34.52 29.70 27.60 27.60 27.60 23.81 6/14/11 12.45 Malleable Iron Fittings - Domestic GALVANIZED BLACK Size Ctn Qty List Price HEX BUSHING CONT. miptxfipt BMHB/GMHB Series BMHB21/2 x 3/4 BMHB21/2 x 1 BMHB21/2 x 11/4 BMHB21/2 x 11/2 BMHB21/2 x 2 BMHB3x1/2 BMHB3 x 3/4 BMHB3 x 1 BMHB3 x 11/4 BMHB3 x 11/2 BMHB3 x 2 BMHB3 x 21/2 BMHB4 x 3/4 BMHB4 x 1 BMHB4 x 11/4 BMHB4 x 11/2 BMHB4 x 2 BMHB4 x 21/2 BMHB4 x 3 20 20 20 20 20 10/20 10/20 10/20 10/20 10/20 10/20 10 10 10 10 10 10 10 10 BMDTB2X11/4 18.28 19.77 20 6/14/11 12.46 GMHB4 x 1 GMHB4 x 11/4 GMHB4 x 11/2 GMHB4 x 2 GMHB4 x 21/2 GMHB4 x 3 20 20 20 20 20 10/20 10/20 10/20 10/20 10/20 10/20 10 $ 50.27 50.27 50.27 45.25 39.63 66.32 66.32 66.32 64.78 59.69 51.58 55.37 10 10 10 10 10 10 139.00 139.00 139.00 108.28 139.00 108.28 GMFB1 x 3/4 GMFB11/4 x 1 25/150 25/150 30.81 38.13 29.20 GMDTB2X1X1 GMDTB2X11/4X11/4 20 20 48.66 48.66 CAP fipt BMCA1/4 ☺ BMCA3/8 ☺ BMCA1/2 BMCA3/4 BMCA1 BMCA11/4 BMCA11/2 BMCA2 BMCA21/2 BMCA3 BMCA4 ☺ GMHB21/2 x 3/4 GMHB21/2 x 1 GMHB21/2 x 11/4 GMHB21/2 x 11/2 GMHB21/2 x 2 GMHB3x1/2 GMHB3 x 3/4 GMHB3 x 1 GMHB3 x 11/4 GMHB3 x 11/2 GMHB3 x 2 GMHB3 x 21/2 DOUBLE TAP BUSHING CAP fipt BMCA/GMCA Series List Price FLUSH BUSHING 25/150 25/150 DOUBLE TAP BUSHING BMFB/GMFB Series Ctn Qty HEX BUSHING CONT. miptxfipt $ 25.98 25.98 25.98 22.60 22.25 39.10 38.16 35.12 35.12 35.12 26.23 30.41 79.59 79.59 79.59 73.29 59.16 71.59 59.16 FLUSH BUSHING BMFB1 x 3/4 BMFB11/4 x 1 Size 40 40 50/300 40/240 25/150 25/100 20/80 10/40 6/12 6/12 5/10 5.40 4.53 4.10 5.56 6.72 8.86 12.18 17.76 40.46 60.12 103.08 GMCA1/4 ☺ GMCA3/8 ☺ GMCA1/2 GMCA3/4 GMCA1 GMCA11/4 GMCA11/2 GMCA2 GMCA21/2 GMCA3 GMCA4 40 40 50/300 40/240 25/150 25/100 20/80 10/40 6/12 6/12 5/10 7.33 7.33 6.06 8.38 10.39 13.67 17.52 24.54 71.27 86.38 190.81 Steel TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Malleable Iron Fittings - Domestic BLACK Size GALVANIZED Ctn Qty List Price LOCK NUT BMLN1/8 ☺ BMLN1/4 ☺ BMLN3/8 BMLN1/2 BMLN3/4 BMLN1 BMLN11/4 BMLN11/2 BMLN2 BMLN/GMLN Series BMP/GMP Series 100/600 100/600 50/300 50/300 50/300 40/160 40/160 40/160 25/100 100 100 100 100 100 40/240 40/160 40/80 25/50 20/40 10/20 5/10 5.63 5.18 6.76 5.80 6.33 12.13 9.97 14.01 23.23 BMU/GMU Series 25/150 35/210 35/210 40/160 30/60 25/50 15/30 12/24 8/16 8 8 1 BMFF/GMFF Series ☺ Steel TM 2 3/8” 2 15/16” 3” 3 1/4” 3 7/8” 3 7/8” 4 1/2” 5 1/2” 5 13/16” 6 3/8” 25/150 25/150 30/120 30/120 30/60 30/60 10/40 15/30 10 10 100/600 100/600 50/300 50/300 50/300 40/160 40/160 40/160 25/100 6.40 5.18 8.48 6.86 8.04 14.62 14.03 18.21 32.07 GMP1/8 ☺ GMP1/4 ☺ GMP3/8 ☺ GMP1/2 ☺ GMP3/4 ☺ GMP1 GMP11/4 GMP11/2 GMP2 GMP21/2 GMP3 GMP4 GMP5 100 100 100 100 100 40/240 40/160 40/80 40/50 20/40 10/20 5/10 $ 1.52 1.54 1.54 1.66 1.79 8.10 13.52 18.26 22.68 47.92 61.38 119.03 236.65 Unions, 150 lbs UL Listed 31.08 28.75 19.81 17.94 20.62 26.87 38.55 48.07 55.88 166.49 200.42 522.70 FLOOR FLANGE (diameter) BMFF1/4 BMFF3/8 BMFF1/2 BMFF3/4 BMFF1 BMFF11/4 BMFF11/2 BMFF2 BMFF21/2 BMFF3 GMLN1/8 ☺ GMLN1/4 ☺ GMLN3/8 GMLN1/2 GMLN3/4 GMLN1 GMLN11/4 GMLN11/2 GMLN2 Square Head Plug mipt $ 1.02 1.02 1.02 1.11 1.23 3.79 6.05 8.56 9.98 24.31 28.16 58.00 109.03 Unions, 150 lbs UL Listed BMU150-1/8 BMU150-1/4 BMU150-3/8 BMU150-1/2 BMU150-3/4 BMU150-1 BMU150-11/4 BMU150-11/2 BMU150-2 BMU150-21/2 BMU150-3 BMU150-4 Ctn Qty List Price LOCK NUT Square Head Plug mipt BMP1/8 ☺ BMP1/4 ☺ BMP3/8 ☺ BMP1/2 ☺ BMP3/4 ☺ BMP1 BMP11/4 BMP11/2 BMP2 BMP21/2 BMP3 BMP4 BMP5 Size GMU150-1/8 GMU150-1/4 GMU150-3/8 GMU150-1/2 GMU150-3/4 GMU150-1 GMU150-11/4 GMU150-11/2 GMU150-2 GMU150-21/2 GMU150-3 GMU150-4 25/150 35/210 35/210 40/160 30/60 25/50 15/30 12/24 8/16 8 8 1 44.29 39.00 26.10 23.81 27.37 35.83 51.81 62.77 72.17 250.69 350.87 751.10 FLOOR FLANGE (diameter) 12.57 12.57 18.93 19.93 23.78 23.78 30.59 36.80 40.38 50.99 GMFF1/4 GMFF3/8 GMFF1/2 GMFF3/4 GMFF1 GMFF11/4 GMFF11/2 GMFF2 GMFF21/2 GMFF3 2 3/8” 2 15/16” 3” 3 1/4” 3 7/8” 3 7/8” 4 1/2” 5 1/2” 5 13/16” 6 3/8” 25/150 25/150 30/120 30/120 30/60 30/60 10/40 15/30 10 10 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 24.43 24.43 47.30 47.30 43.17 57.38 73.52 93.37 113.51 110.78 6/14/11 12.47 4/2009 12.48 TM www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Nipples - Schedule 80 PVC, CPVC Schedule 80 PVC and CPVC Nipple Features: • Sturdy, Sch 80 PVC, CPVC • Chemical Resistant. • Gray or white (1/2” thru 2”) in Sch 80 PVC. • Threaded on both ends. • Standard carton quantity of 50 (1/2” diam) or 25 (3/4”thru 2” diam). • Threaded one end only (TOE) available upon request. • Clear available upon request. ORDER BY SIZE ONLY (DIAMETER X LENGTH) EXAMPLES: 1/2X3 FOR GRAY PVC 1/2X3W FOR WHITE PVC CPVC1XCLOSE FOR CPVC SCHEDULE 80 PVC NIPPLE LIST PRICES-GRAY & WHITE (SHADED AREA INDICATES SIZES AVAILABLE IN WHITE PVC) PIPE DIA. 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 3” 4” LENGTH CLOSE 7/8” 1” 1 1/8” 1 3/8” 1 1/2” 1 5/8” 1 3/4” 2” CLOSE 0.91 0.87 0.59 0.64 0.92 1.33 1.66 2.19 7.95 13.01 1 1/2” 0.68 0.68 2” 1.11 1.01 0.68 0.74 1.08 1.46 1.84 2 1/2” 3” 1.16 4” 1.36 5” 6” 8” 10” 12” 2.26 0.74 0.77 1.19 1.57 1.94 2.46 0.77 0.81 1.21 1.73 2.10 2.62 9.57 0.86 0.99 1.43 1.98 2.46 3.09 11.21 14.99 1.05 1.16 1.76 2.34 2.77 3.61 1.12 1.36 1.94 2.62 3.18 4.02 15.04 18.99 2.02 1.32 1.58 2.29 3.18 3.83 4.93 16.97 22.52 1.56 1.88 2.73 3.72 4.39 5.81 21.08 27.14 1.68 2.04 3.04 4.19 4.94 6.66 25.06 31.74 SCHEDULE 80 PVC NIPPLE LIST PRICES PRE-CUT PIPE THREADED BOTH ENDS PIPE DIA. 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 3” LENGTH 18” 2.30 2.75 4.36 6.38 24” 2.78 3.47 5.17 10.29 32.37 30” 3.50 4.36 36” 4.21 5.36 7.73 48” 5.27 7.08 9.87 15.98 13.83 18.28 41.66 SCHEDULE 80 CPVC PIPE NIPPLES PART NO. CPVC1XCLOSE CPVC11/2xCLOSE CPVC11/2X6 CPVC11/2x8 CPVC11/2X12 CPVC2XCLOSE CPVC2X6 CPVC2x8 CPVC2X12 CPVC2x24 SIZE 1 X CLOSE 1 1/2 x CLOSE 1 1/2X 6 1 1/2 x 8 1 1/2 X 12 2 X CLOSE 2X6 2x8 2 X 12 2 x 24 TM CTN QTY 25 25 25 25 25 25 25 25 BULK BULK LIST PRICE $ 2.62 3.83 11.03 13.41 20.88 6.38 15.73 18.62 28.70 57.74 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 10/12/10 12.49 Nipples - Red Brass, Chrome Plated Red Brass Red Brass Nipple Features: • • • • • • Red Brass pipe conforms to ASTM B43-91 85% copper, 15% zinc, no lead Made in the U.S.A. Manufactured for AGI in an ISO 9002 facility. Standard carton quantity is 25 pieces through 1” diameter. Standard carton quantity is 10 pieces 1 1/4” - 2” diameter. ORDER BY PART NUMBER B80 WITH SIZE (DIAMETER X LENGTH) EXAMPLE: B80-1/2 X 3 ISO 9002 RED BRASS PIPE NIPPLE LIST PRICES PIPE LENGTH DIA. CLOSE 1/8” 3/4” 1/4” 7/8” 3/8” 1” 1/2” 1 1/8” 3/4” 1 3/8” 1” 1 1/2” 1 1/4” 1 5/8” 1 1/2” 1 3/4” 2” 2” CLOSE $3.30 3.76 4.00 4.92 7.15 10.51 16.01 20.05 30.80 1 1/2” 3.76 4.30 4.78 5.67 7.54 2” 4.01 4.82 5.33 6.73 9.04 12.90 17.95 21.49 2 1/2” 4.62 5.33 6.22 7.99 10.50 15.04 19.24 24.75 33.49 3” 4.89 4.83 7.16 9.36 12.09 17.18 24.82 29.49 38.04 3 1/2” 5.29 6.99 8.25 10.71 13.86 19.86 27.07 32.61 45.12 4” 5.92 7.89 9.22 12.26 15.71 22.27 31.25 38.48 47.33 4 1/2” 6.70 8.91 10.45 13.59 17.50 24.82 36.35 41.27 52.85 5” 7.26 9.72 11.42 14.99 19.32 27.46 38.17 47.93 58.47 5 1/2” 7.91 10.54 12.44 16.46 21.07 30.10 40.60 49.95 64.22 6” 8.43 11.37 13.42 17.79 21.85 32.69 45.46 54.20 69.74 Chrome Plated Red Brass Nipple Features: • • • • • Red brass pipe conforms to ASTM B43-91 85% copper, 15% zinc, no lead. Made in the U.S.A. Manufactured for AGI in an ISO 9002 facility. Standard carton quantity is 25. ORDER BY PART NUMBER CP80 WITH SIZE (DIAMETER X LENGTH) EXAMPLE: CP80-1/2 X 3 ISO 9002 chrome plated RED BRASS PIPE NIPPLE LIST PRICES PIPE DIA. 3/8” 1/2” 3/4” 1” 6/14/11 12.50 LENGTH CLOSE 1” 1 1/8” 1 3/8” 1 1/2” CLOSE $ 8.43 11.23 18.33 27.00 1 1/2” 2” 9.97 12.12 12.98 15.29 23.06 33.31 TM 2 1/2” 3” 13.09 16.07 18.19 21.31 30.85 44.78 3 1/2” 4” 17.34 20.58 24.33 27.91 58.30 4 1/2” 5” 5 1/2” 6” 21.97 24.06 26.12 28.26 30.26 33.35 36.58 40.60 43.80 71.88 78.74 85.85 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 Nipples - Black Steel Black Steel Nipple Features: • • • Standard carton quantity is 25 pieces for all diameters up to 2”and all lengths up to 6”. Carton quantities required for nipples through 2” diameter. Imported. ORDER BY PART NUMBER BS80 WITH SIZE (DIAMETER X LENGTH) EXAMPLE: BS80-1/2 X 3 BLACK STEEL PIPE NIPPLE LIST PRICES STANDARD WELDED PIPE LENGTH DIA. CLOSE CLOSE 1 1/2” 2” 1/8” 3/4” 0.98 1.18 1.18 1/4” 7/8” 1.16 1.23 1.23 3/8” 1” 1.18 1.35 1.35 1/2” 1 1/8” 1.03 1.03 1.03 3/4” 1 3/8” 1.17 1.22 1.22 1” 1 1/2” 1.72 1.89 11/4” 1 5/8” 2.20 2.38 11/2” 1 3/4” 2.72 2.93 2” 2” 3.73 21/2” 2 1/2” 11.22 3” 2 5/8” 13.85 4” 2 7/8” 20.88 6” 3 1/8” 37.88 2 1/2” 1.36 1.59 1.72 1.23 1.45 2.04 2.73 3.29 4.29 3” 1.36 1.59 1.72 1.23 1.45 2.04 2.73 3.29 4.29 11.53 15.06 3 1/2” 4” 4 1/2” 5” 5 1/2” 6” 7” 8” 1.77 1.77 3.15 3.15 3.49 3.49 4.80 1.87 1.87 2.81 2.81 3.30 3.03 5.07 5.07 2.04 2.04 2.95 2.95 3.35 3.35 5.78 5.78 1.50 1.50 1.72 1.72 1.99 1.99 3.49 3.49 1.80 1.80 2.17 2.17 2.57 2.57 4.29 4.29 2.64 2.64 3.20 3.20 3.76 3.76 5.70 5.70 3.52 3.52 4.33 4.33 5.09 5.09 7.18 7.18 4.18 4.18 5.11 5.11 6.02 6.02 8.25 8.25 5.52 5.52 6.73 6.73 7.96 7.96 11.71 11.71 13.56 13.56 14.86 16.14 16.14 20.51 17.85 17.85 19.68 19.68 21.42 21.42 28.87 28.87 24.16 26.57 26.57 29.49 29.49 34.05 34.05 66.13 76.86 86.56 9” 6.48 4.19 4.95 6.69 8.63 9.73 13.79 10” 5.31 5.98 6.48 4.19 4.95 6.69 8.63 9.73 13.79 23.06 32.42 39.19 106.27 11” 12” 5.59 6.59 7.06 7.06 4.98 4.98 5.51 5.51 7.67 7.67 9.76 9.76 11.58 11.58 15.84 15.84 25.62 35.97 35.97 46.53 126.00 BLACK STEEL PIPE NIPPLE LIST PRICES PRE-CUT PIPE THREADED BOTH ENDS PIPE DIA. 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” PACK QTY 5 5 5 3 3 3 3 3 3 3 18” $ 9.90 7.39 9.17 11.77 14.99 17.12 23.85 51.89 73.38 24” 12.34 9.72 11.73 15.40 20.21 23.12 31.60 52.35 68.50 96.95 Black Steel Tank Leg Features: • • • For use with standard steel tanks No cradle required Threaded one end x square cut TM 30” 36” 48” 60” 72” 11.36 13.71 17.77 23.85 28.14 37.74 13.38 16.24 21.44 28.10 33.72 45.24 16.92 21.62 47.98 37.53 44.78 60.09 20.31 26.47 35.24 46.79 55.84 74.96 24.97 30.46 41.64 101.48 134.51 PART NO. BS80-11/4X10TOE BS80-11/4X11TOE BS80-11/4X12TOE BS80-11/4X14TOE CTN QTY 5/20 5/20 5/20 5/20 67.10 LIST PRICE $ 8.63 9.76 9.76 9.76 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095 6/14/11 12.51 Nipples - Galvanized Steel Galvanized Steel Nipple Features: • • • Standard carton quantity is 25 pieces for all diameters up to 2”and all lengths up to 6”. Carton quantities required for nipples through 2” diameter. Imported. ORDER BY PART NUMBER GS80 WITH SIZE (DIAMETER X LENGTH) EXAMPLE: GS80-1/2 X 3 GALVANIZED STEEL PIPE NIPPLE LIST PRICES STANDARD WELDED PIPE LENGTH DIA. CLOSE CLOSE 1 1/2” 2” 1/8” 3/4” 1.22 1.70 1.70 1/4” 7/8” 1.31 1.54 1.54 3/8” 1” 1.41 1.61 1.61 1/2” 1 1/8” 1.17 1.30 1.30 3/4” 1 3/8” 1.45 1.58 1.58 1” 1 1/2” 2.00 2.35 11/4” 1 5/8” 2.68 2.91 11/2” 1 3/4” 3.12 3.36 2” 2” 4.40 21/2” 2 1/2” 13.13 3” 2 5/8” 15.77 4” 2 7/8” 23.63 6” 3 1/8” 46.06 2 1/2” 2.24 1.99 2.18 1.50 1.73 2.53 3.15 3.74 4.95 3” 2.22 1.99 2.18 1.50 1.73 2.53 3.15 3.74 4.95 13.65 17.95 37.89 3 1/2” 4” 4 1/2” 5” 5 1/2” 2.62 2.62 4.46 4.46 4.98 2.38 2.38 3.29 3.29 3.65 2.58 2.58 3.59 3.59 3.97 1.84 1.84 2.20 2.20 2.49 2.16 2.16 2.71 2.71 3.22 3.07 3.07 3.74 3.74 4.27 3.90 3.90 4.64 4.64 5.61 4.76 4.76 5.75 5.75 6.47 6.04 6.04 7.72 7.72 8.94 15.85 15.85 17.67 17.67 19.40 21.04 21.04 24.53 24.53 25.94 28.22 31.67 31.67 35.02 56.87 6” 4.98 3.65 3.97 2.49 3.22 4.27 5.61 6.47 8.94 19.40 25.94 35.02 80.40 7” 6.27 4.36 5.61 7.10 8.76 10.00 14.60 25.01 34.94 8” 6.59 6.27 6.35 4.36 5.61 7.10 8.76 10.00 14.60 25.01 34.94 41.81 105.22 9” 10” 7.04 7.04 7.53 5.21 6.24 8.15 10.43 11.67 17.10 28.49 39.83 48.42 129.20 5.21 6.24 8.15 10.43 11.67 17.10 39.84 11” 12” 7.79 8.39 5.95 5.95 6.97 6.97 9.47 9.47 12.09 12.09 13.33 19.60 19.60 31.90 31.90 44.81 44.81 55.11 153.15 GALVANIZED STEEL PIPE NIPPLE LIST PRICES PRE-CUT PIPE THREADED BOTH ENDS PIPE DIA. 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4” PACK QTY 5 5 5 3 3 3 3 3 3 3 18” 11.89 9.13 10.84 13.96 18.40 20.91 28.51 43.84 61.75 87.31 24” 30” 36” 48” 60” 72” 11.73 13.90 18.60 24.67 27.97 37.71 57.83 81.46 107.11 13.87 17.10 21.70 29.15 33.79 44.38 74.51 102.07 16.01 19.63 24.80 33.62 39.60 51.05 20.54 25.65 32.89 44.58 52.64 66.37 25.32 31.40 41.39 55.43 66.69 82.92 29.91 37.07 120.74 171.31 160.03 227.21 GALVANIZED STEEL REDUCING PIPE NIPPLES PART NO. GSR80-3/4X1/2X23/4 GSR80-11/4x1x31/2 GSR80-1x3/4x3 6/14/11 12.52 SIZE 3/4 X 1/2 X 2 3/4 1 1/4 x 1 x 3 1/2 1 x 3/4 x 3 TM CTN QTY 25 25 25 LIST PRICE $ 11.96 14.41 13.45 www.americangranby.com In the United States: Phone (800) 776-2266 Fax (800) 729-3299 In Canada: Phone (866) 503-5523 Fax (888) 562-2095
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-702 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2011:06:10 14:40:30-04:00 Create Date : 2011:06:03 11:11:47-04:00 Metadata Date : 2011:06:10 14:40:30-04:00 Format : application/pdf Title : June1411PrChg:PrChg2011.qxd.qxd Creator : salcott Document ID : uuid:7ce4701c-b002-4980-a6b0-9df4db27b47f Instance ID : uuid:7f5f964b-7d21-405a-9118-d514e907bf81 Has XFA : No Page Count : 162 Author : salcottEXIF Metadata provided by EXIF.tools