Kinco FV100 5T VFD User Manual 20170803 L011619

User Manual: L011619 - FV100-5T VFD User Manual-20170803

Open the PDF directly: View PDF PDF.
Page Count: 131 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Scroll down to view the document on your mobile browser.
Preface Thank you for using FV100 series Variable Frequency Drive made by Kinco Automation. FV100 satisfies the high performance requirements by using a unique control method to achieve high torque, high accuracy and wide speed-adjusting range. Its anti-tripping function and capabilities of adapting to severe power network, temperature, humidity and dusty environment exceed those of similar product made by other companies, which improves the product’s reliability noticeably; FV100 use modularization design, in the premise of satisfying the demand of customer, we also can satisfy customer’s personalized and industrization demand by expansion design, and this fit the trend of VFD development. Built-in PG connector, strong speed control, flexible input/output terminal, pulse frequency setting, saving parameters at power outage and stop, frequency setting channel, master and slave frequency control and so on, all these satisfy various of high accuracy and complex drive command, at the same time we provide the OEM customer high integration total solution, it values highly in system cost saving and system reliability improving. FV100 can satisfy the customers’ requirements on low noise and EMI by using optimized PWM technology and EMC design. This manual provides information on installation, wiring, parameters setting, trouble-shooting, and daily maintenance. To ensure the correct installation and operation of FV100, please read this manual carefully before starting the drive and keep it in a proper place and to the right person. Unpacking Inspection Note Upon unpacking, please check for:  Any damage occurred during transportation;  Check whether the rated values on the nameplate of the drive are in accordance with your order. Our product is manufactured and packed at factory with great care. If there is any error, please contact us or distributors. The user manual is subject to change without notifying the customers due to the continuous process of product improvements VFD model rule FV 1 00 – 5 T– 0075G/0110L – U –000 VFD code FV：FV Series The first generation 0075G: 7.5KW constant torque 0110L: 11KW constant power Power supply 2: 220V 4: 380V 5: 480V 00：Standard model …… Custom model S：Signal phase T：Three-phase Hardware custom code Software custom code
Content Chapter 1 Safety .............................................................................................................................................................. 1 1.1 Safety ................................................................................................................................................................... 1 1.2 Notes for Installations.......................................................................................................................................... 1 1.3 Notes for Using FV100 ....................................................................................................................................... 1 1.3.1 About Motor and Load ............................................................................................................................. 1 1.3.2 About Variable Frequency Drive .............................................................................................................. 2 1.4 Disposing Unwanted Driver ................................................................................................................................ 3 Chapter 2 Product introduction ...................................................................................................................................... 4 2.1General specifications .......................................................................................................................................... 4 2.2 Introduction of product series .............................................................................................................................. 5 2.3 Structure of VFD ................................................................................................................................................. 6 2.4 External dimension and weight ........................................................................................................................... 7 2.4.1 External dimension and weight ................................................................................................................ 7 2.4.2 Operation panel and installation box ........................................................................................................ 9 2.4.3 Braking Resistor Selection ..................................................................................................................... 10 Chapter 3 Installation Environment .............................................................................................................................. 11 Chapter 4 Wiring Guide of VFD ................................................................................................................................... 12 4.1 Wiring and Configuration of Main circuit terminal ........................................................................................... 12 4.1.1 Terminal Type of Main Loop’s Input and Output ................................................................................... 12 4.1.2 Wiring of VFD for Basic Operation ....................................................................................................... 14 4.2 Wiring and configuration of control circuit ....................................................................................................... 14 4.2.1 Wiring of control circuit terminal. .......................................................................................................... 14 Chapter 5 Operation Instructions of Kinco VFD .......................................................................................................... 22 5.1Using Operation Panel ........................................................................................................................................ 22 5.1.1 Operation panel appearance and keys’ function description ................................................................... 22 5.1.2 Function Descriptions of LED and Indicators ........................................................................................ 23 5.1.3 Display status of operation panel ............................................................................................................ 23 5.1.4 Panel Operation ...................................................................................................................................... 24 5.2Operation mode of VFD ..................................................................................................................................... 26 5.2.1 Control mode of VFD ............................................................................................................................. 26 5.2.2 Operating Status ..................................................................................................................................... 26 5.2.3 Control mode and operation mode of Kinco VFD ................................................................................. 26 5.2.4 The channels to set the VFD frequency .................................................................................................. 27 5.3Power on the Drive for the first time .................................................................................................................. 28 5.3.1 Checking before power on ...................................................................................................................... 28 5.3.2 Operations when start up the first time ................................................................................................... 28 Chapter 6 Parameter Introductions ................................................................................................................................ 29 6.1 Group A0 ........................................................................................................................................................... 29

Navigation menu