LP 300 Manual
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 68
| Download | |
| Open PDF In Browser | View PDF |
PNEUMATIC X/Y POSITIONER (LP-300) AND ACCESSORIES USER MANUAL RIGID LANCING MACHINE (BRLM 500-XX) ACCESSORY AUTOBOX® FLEX LANCE ADAPTER (ABX-LP-XX) ACCESSORY PL 665 REV F (03/2019) TABLE OF CONTENTS MANUFACTURER’S INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 CE DECLARATIONS OF INCORPORATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 X/Y POSITIONER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 RIGID LANCING MACHINE WITH ROTARY DRIVE. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 AUTOBOX® FLEX LANCE ADAPTER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 X/Y POSITIONER (LP-300) SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 DESCRIPTION OF EQUIPMENT AND INTENDED USE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 KEY FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 RIGID LANCING MACHINE (BRLM-500-XX) SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 DESCRIPTION OF EQUIPMENT AND INTENDED USE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 KEY FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 AUTOBOX® FLEX LANCE ADAPTER (ABX-LP-XX) SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 DESCRIPTION OF EQUIPMENT AND INTENDED USE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 KEY FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 WARNING AND SAFETY INSTRUCTIONS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0 OPERATOR TRAINING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0 PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 0 PRE-RUN SAFETY CHECK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 SYSTEM ASSEMBLY - OVERVIEWS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 RIGID LANCING MACHINE ON X/Y POSITIONER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 CONTROL BOX FOR RIGID LANCE MACHINE CB-LP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 X/Y POSITIONER ASSEMBLY (LP-300-XX) SET-UP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 REAR SUPPORT ASSEMBLY (LP 320) SET-UP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 RIGID LANCING MACHINE ON X/Y POSITIONER SET-UP.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 CB-LP CONTROL BOX SET-UP.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 RIGID LANCING MACHINE OPERATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 MAINTENANCE AND TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 AUTOBOX® FLEX LANCE ADAPTER ON X/Y POSITIONER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 CBX-TBX-LPA TUMBLE BOX TO CONTROL BOX SET-UP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 AUTOBOX® FLEX LANCE ADAPTER SET-UP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 PNEUMATIC CONTROL BOX TO AUTOBOX TRACTOR CONNECTIONS. . . . . . . . . 38 PART DIAGRAMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 TERMS AND CONDITIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 2 866-795-1586 • WWW.STONEAGETOOLS.COM MANUFACTURER’S INFORMATION StoneAge Inc. StoneAge Europe 466 S. Skylane Drive Unit 2, Britannia Business Centre Durango, CO 81303, USA Britannia Way Phone: 970-259-2869 Malvern WR14 1GZ Toll Free: 866-795-1586 United Kingdom www.stoneagetools.com Phone: (+44) (0) 1684 892065 This manual must be used in accordance with all applicable national laws. The manual shall be regarded as a part of the machine and shall be kept for reference until the final dismantling of the machine, as defined by applicable national law(s). Updated manuals can be downloaded at: https://www.stoneagetools.com/manuals 866-795-1586 • WWW.STONEAGETOOLS.COM 3 EU DECLARATION OF CONFORMITY Manufacturer: StoneAge Incorporated 466 South Skylane Drive Durango, CO 81303 USA Authorized Representative: StoneAge Europe Unit 2, Britannia Business Centre Britannia Way Malvern WR14 1GZ United Kingdom Steve Ellis, Director StoneAge Europe Declare that: X/Y Positioner (LP-300) for high pressure water cleaning of system parts. Is compliant with the following Directives and Standards: Directive 2006/42/EC (Machinery Directive) EN ISO 12100:2010 (E) Safety of machinery – General principles for design – Risk assessment and risk reduction The Technical File for X/Y Positioner (LP-300) is maintained at: StoneAge Incorporated, 466 South Skylane Drive, Durango, CO 81303, USA and was compiled by the Engineering Manager. The Technical File is available through the Authorized Representative. This Declaration of Conformity is issued under the exclusive responsibility of StoneAge Incorporated. ________________________________________ 02/11/2019 StoneAge Incorporated, Durango, CO, USA Date Adam Markham, Engineering Manager, Robotics 4 866-795-1586 • WWW.STONEAGETOOLS.COM EU DECLARATION OF CONFORMITY Manufacturer: StoneAge Incorporated 466 South Skylane Drive Durango, CO 81303 USA Authorized Representative: StoneAge Europe Unit 2, Britannia Business Centre Britannia Way Malvern WR14 1GZ United Kingdom Steve Ellis, Director StoneAge Europe Declare that: Rigid Lance Machine (BRLM 500-XX with BRLM 3XX-XX-XX) for high pressure water cleaning of system parts. Is compliant with the following Directives and Standards: Directive 2006/42/EC (Machinery Directive) EN ISO 12100:2010 (E) Safety of machinery – General principles for design – Risk assessment and risk reduction The Technical File for Rigid Lance Machine (BRLM 500-XX with BRLM 3XX-XX-XX) is maintained at: StoneAge Incorporated, 466 South Skylane Drive, Durango, CO 81303, USA and was compiled by the Engineering Manager. The Technical File is available through the Authorized Representative. This Declaration of Conformity is issued under the exclusive responsibility of StoneAge Incorporated. ________________________________________ 02/11/2019 StoneAge Incorporated, Durango, CO, USA Date Adam Markham, Engineering Manager, Robotics 866-795-1586 • WWW.STONEAGETOOLS.COM 5 EU DECLARATION OF CONFORMITY Manufacturer: StoneAge Incorporated 466 South Skylane Drive Durango, CO 81303 USA Authorized Representative: StoneAge Europe Unit 2, Britannia Business Centre Britannia Way Malvern WR14 1GZ United Kingdom Steve Ellis, Director StoneAge Europe Declare that: Autobox® Flex Lance Adapter (ABX-LP-XX) for high pressure water cleaning of system parts. Is compliant with the following Directives and Standards: Directive 2006/42/EC (Machinery Directive) EN ISO 12100:2010 (E) Safety of machinery – General principles for design – Risk assessment and risk reduction The Technical File for Autobox® Flex Lance Adapter (ABX-LP-XX) is maintained at: StoneAge Incorporated, 466 South Skylane Drive, Durango, CO 81303, USA and was compiled by the Engineering Manager. The Technical File is available through the Authorized Representative. This Declaration of Conformity is issued under the exclusive responsibility of StoneAge Incorporated. ________________________________________ 02/11/2019 StoneAge Incorporated, Durango, CO, USA Date Adam Markham, Engineering Manager, Robotics 6 866-795-1586 • WWW.STONEAGETOOLS.COM SPECIFICATIONS X/Y POSITIONER (LP-300) WEIGHTS LP-300-XX LP-320 REAR SUPPORT LP 335-WE SWIVEL WHEEL KIT LP 335-JE SWIVEL WHEEL KIT LP 335-WJE SWIVEL WHEEL KIT 310 lb 141 kg 96 lb 44 kg 20 lb 9 kg 24 lb 11 kg 35 lb 16 kg DESCRIPTION OF EQUIPMENT AND INTENDED USE The X/Y Positioner (LP-300) provides a means for aligning and indexing the BRLM Rigid Lancing Machines. It moves in a straight line along the X and Y axes. The Control Box (CB-LP) allows the operator to control the machinery from a safe distance away from the blast zone. KEY FEATURES: • Control Box - Control all movements of the complete package from up to 25 ft/8m away. • Pneumatically driven • Configurable operating window dimension- Allows for versatility for cleaning a variety of exchanger sizes. • Steering control and tilt function - Positioner offers easy mobility and can be tilted to match the tube pitch angle of a bundle face. 866-795-1586 • WWW.STONEAGETOOLS.COM 7 SPECIFICATIONS RIGID LANCE MACHINE (BRLM 500-XX) BRLM RIGID LANCE MACHINE SPECIFICATIONS BRLM 500 (15K) BRLM 500 (22K) BRLM 500 (40K) Pressure Range 2–15k psi 140–1000 bar 15–22k psi 1000–1500 bar 22–40k psi 1500–2800 bar Flow Range Up to 50 gpm Up to 189 l/min Up to 50 gpm Up to 189 l/min Up to 20 gpm Up to 76 l/min Flow Coefficient 2.3 Cv 2.0 Cv 0.3 Cv (UHS) 0.5 Cv (UH) Inlet Connection 1/2 NPT (P8) 3/4 MP (MP12) 9/16 HP (H9) Lance Connection 1/8, 1/4 NPT 3/8, 9/16 LH 3/8, 9/16 LH Standard Rail Length BRLM 500-15 15ft / 4.6m BRLM 500-15 15ft / 4.6m BRLM 500-15 15ft / 4.6m Standard Extensions BRLM 580-X 5, 10, or 15ft 1.5, 3, or 4.6m BRLM 580-X 5, 10, or 15ft 1.5, 3, or 4.6m BRLM 580-X 5, 10, or 15ft 1.5, 3, or 4.6m Up to 60 ft Up to 18m Up to 60 ft Up to 18m Up to 60 ft Up to 18m 1200–1500 lb 544–680 kg 1200–1500 lb 544–680 kg 1200–1500 lb 544–680 kg Water Swivels SG-P8P8-0 / SL-P8P4-0 SL-MP9AV9-0 / SL-MP12AV12-0 UH-H9H6-0 / UHS-H9H9 Rotation Air Motor Gast 4AM 20 to 40 cfm @ 80 psi Gast 4AM 20 to 40 cfm @ 80 psi Gast 4AM 20 to 40 cfm @ 80 psi Feed Air Motor Gast 6AM 30 to 50 cfm @ 80 psi Gast 6AM 30 to 50 cfm @ 80 psi Gast 6AM 30 to 50 cfm @ 80 psi 160 ºF 70 ºC 160 ºF 70 ºC 160 ºF 70 ºC Stroke Length Weight Complete Maximum Water Temperature DESCRIPTION OF EQUIPMENT AND INTENDED USE KEY FEATURES: The Rigid Lancing Machine was designed for the effective cleaning of the inside of tubes within a heat exchanger bundle. RIGID LANCE MACHINE (BRLM 500) • Adjustable feed rate for lance travel- Both directions of the lance can be regulated for speed to deliver appropriate cleaning. It is used with a rigid lance and nozzle head. Rigid Lances provide more forward-hitting power than flex lancing to clean difficult deposits. It is possible to operate 3 rotary lances simultaneously and remotely from the control box. Air or hydraulic motors supply rotation and feed power. Since the lance is continuously rotated, a fewer number of larger, more powerful jets are used to completely clean the insides of the tubes. Larger jets will also penetrate tougher deposits more effectively than many smaller, non-rotating jets. Rotation of the tip also makes this tool effective for polishing tube walls. The powered feed allows all the jet power to be used in attacking the material ahead of the tip. 8 • Adjustable lance stops- Forward stop to ensure complete tube coverage, optional retract stop to protect lances and operator • Control Box - Control all movements of the complete package from up to 25 ft/8m away. • Pneumatically driven 866-795-1586 • WWW.STONEAGETOOLS.COM SPECIFICATIONS AUTOBOX® FLEX LANCE ADAPTER (ABX-LP-XX) ABX-LP-XX SPECIFICATIONS Weight Per Assembly Size Per Assembly CB-TBX-LPA ABX-100-LP ABX-300-LP 11 lbs 5 kg 25 lbs 11.4 kg 29.5 lbs 13.4 kg 14in (W) x 7in (D) x 12in (H) 356mm (W) x 178mm (D) x 305mm (H) 4in (W) x 53in (D) x 4in (H) 102mm (W) x 1349mm (D) x 102mm (H) 4in (W) x 52in (D) x 4in (H) 102mm (W) x 1318mm (D) x 107mm (H) Minimum System Supply Pressure 100 psi (7.9 bar) Minimum/Maximum Air Supply Volume 78 cfm Minimum /156 cfm Maximum Recommended Operational Temperature Range 20 to 140 ºF (-29 to 60 ºC) Recommended Operational Relative Humidity Range Up to 100% RH DESCRIPTION OF EQUIPMENT AND INTENDED USE KEY FEATURES: The Tumble Box and Tractor Mount assemblies were designed to adapt ABX-2L and ABX-3L Flexible Lancing Machines the LP-300 X-Y Positioner. This positioner is also used with the standard Rigid Lancing Machine. AUTOBOX® ADAPTER TO LP-300 (ABX-XXX-LP) • Allows flex lance tractors, AUTOBOX® 2L and 3L to be operated on the X/Y Positioner LP-300 Flexible Lancing Machines used with the positioner are advantageous in tight physical locations for cleaning tube bundles on heat exchangers. For users that already own ABX Flexible Lancing machines, the Tumble Box and Tractor Mount assemblies provide additional capability for existing pad cleaning equipment. • Tumble Box mounts to CB-ABX and CBX-ABX universally. • Tumble Box and adapts 1/4” air lines from the AUTOBOX® Control Boxes to the 1/2” air lines on the LP-300 Positioner. Rigid Lancing Machines by contrast require more physical space to operate. However, rigid lance equipment can provide more unplugging power due to the ability to run all forward facing jets. 866-795-1586 • WWW.STONEAGETOOLS.COM 9 WARNING AND SAFETY INSTRUCTIONS OPERATOR TRAINING Managers, Supervisors, and Operators MUST be trained in Health and Safety Awareness of High-pressure Water Jetting and hold a copy the Water Jetting Association (WJA) Code of Practice, or equivalent (see www.waterjetting.org.uk). Operators MUST be trained to identify and understand all applicable standards for the equipment supplied. Operators should be trained in manual handling techniques to prevent bodily injury. StoneAge has designed and manufactured this equipment considering all hazards associated with its operation. StoneAge assessed these risks and incorporated safety features in the design. StoneAge WILL NOT accept responsibility for the results of misuse. Operators MUST read, understand, and follow the Operational and Training Requirements (Section 7.0) of WJTA-IMCA’s Recommended Practices For The Use Of High-pressure Waterjetting Equipment, or equivalent. Operators MUST read, understand and follow the Warnings, Safety Information, Assembly, Installation, Connection, Operation, Transport, Handling, Storage, and Maintenance Instructions detailed in this manual. The risk assessment MUST consider potential material or substance hazards including: • • IT IS THE RESPONSIBILITY OF THE INSTALLER/OPERATOR to conduct a job specific risk assessment prior to use. Job specific risk assessment MUST be repeated for each different set up, material, and location. • The risk assessment MUST conform to the Health and Safety at Work Act 1974 and other relevant Health and Safety legislation. • • • • • • • • • PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS Use of Personal Protective Equipment (PPE) is dependent on the working pressure of water and the cleaning application. Managers, Supervisors, and Operators MUST carry out a job specific risk assessment to define the exact requirements for PPE. See Protective Equipment for Personnel (Section 6) of WJTAIMCA’s Recommended Practices For The Use Of High-pressure Waterjetting Equipment for additional information. Hygiene - Operators are advised to wash thoroughly after all waterjetting operations to remove any waterblast residue which may contain traces of harmful substances. First aid provision - users MUST be provided with suitable first aid facilities at the operation site. 10 Aerosols Biological and microbiological (viral or bacterial) agents Combustible materials Dusts Explosion Fibers Flammable substances Fluids Fumes Gases Mists Oxidizing Agents PPE may include: • Eye protection: Full face visor • Foot protection: Kevlar® brand or steel toe capped, waterproof, non-slip safety boots • Hand protection: Waterproof gloves • Ear protection: Ear protection for a minimum of 85 dBA • Head protection: Hard hat that accepts a full face visor and ear protection • Body protection: Multi-layer waterproof clothing approved for waterjetting • Hose protection: Hose shroud • Respiratory protection: May be required; refer to job specific risk assessment 866-795-1586 • WWW.STONEAGETOOLS.COM WARNING AND SAFETY INSTRUCTIONS WARNING PRE-RUN SAFETY CHECK Operations with this equipment can be potentially hazardous. Caution MUST be exercised prior to and during machine and water jet tool use. Please read and follow all of these instructions, in addition to the guidelines in the WJTA Recommended Practices handbook, available online at www.wjta.org. Deviating from safety instructions and recommended practices can lead to severe injury and/or death. • • • • Do not exceed the maximum operating pressure specified for any component in a system. The immediate work area MUST be marked off to keep out untrained persons. Inspect the equipment for visible signs of deterioration, damage, and improper assembly. Do not operate until repaired. Make sure all threaded connections are tight and free of leaks. Users of the BRLM Rigid Lancing System MUST be trained and/or experienced in the use and application of highpressure technology and cleaning, as well as all associated safety measures, according to the WJTA Recommended Practices for the use of High-pressure Water jetting Equipment. The Control Box should be located in a safe location where the operator has good visibility of the pipe and hose. The BRLM Lancing System and Control Box MUST be supervised at all times and should never be left unattended. • Test the Control Box before operating the BRLM Rigid Lancing System with high-pressure water to verify the control valves move the hose in the intended direction, and that the dump valve is working properly. • Always de-energize the system before opening the door to service or replace any parts. Failure to do so can result in severe injury and/or death. Refer to WJTA-IMCA’s, Recommended Practices For The Use Of High-pressure Water jetting Equipment and/or The Water Jetting Association’s, WJA Code of Practice for additional safety information. • Complete a job specific risk assessment and act on the resulting actions. • Ensure the waterblasting zone is properly barricaded and that warning signs are posted. • Adhere to all site safety procedures. • Ensure no personnel are in the hydroblasting zone. • Ensure the work place is free of unnecessary objects (e.g. loose parts, hoses, tools). • Ensure all operators are using the correct Personal Protective Equipment (PPE). • Check that the air hoses are properly connected and tight. • Check all hoses and accessories for damage prior to use. Do not use damaged items. Only high quality hoses intended for waterblast applications should be used as high-pressure hoses. • Ensure that operators never connect, disconnect, or tighten hoses, adapters, or accessories with the high-pressure water pump unit running. • Check all high-pressure threaded connections for tightness. 866-795-1586 • WWW.STONEAGETOOLS.COM 11 OVERVIEW-X/Y POSITIONER (LP-300-XX) WITH BRLM ACCESSORY X/Y POSITIONER LP-300-XX WITH BRLM RIGID LANCING MACHINE ACCESSORIES LP-300-XX X/Y POSITIONER (LANCES NOT INCLUDED) BRLM 500-XX LP 320 REAR SUPPORT *AVAILABLE IN 10FT AND 15FT LENGTHS AND PNEUMATIC OR HYDRAULIC OPTIONS FOR RAIL ASSEMBLIES OVER 25FT / 7.6M BRLM 636-XX-XXX GUIDE BLOCK KIT BRLM ROTARY PACKAGE *AVAILABLE OPTIONS • 15k, 22k, OR 40k psi • SINGLE, DUAL, OR TRIPLE LANCE • PNEUMATIC OR HYDRAULIC WATER SUPPLY LINE (NOT INCLUDED) BRLM 580-XX RAIL EXTENSION KITS CB-LP CONTROL BOX *AVAILABLE IN 5FT, 10FT, AND, 15FT LENGTHS **SHOWN WITH THE BRLM-310-XX SINGLE LANCE ROTARY PACKAGE AND THE LP 335-WE WHEEL KIT -WJE LP 335-XX WHEEL KIT LEG OPTIONS (INCLUDED 4 LEGS) INDIVIDUAL LEGS (LP 330-XX) -JE -WE -E -WC 12 866-795-1586 • WWW.STONEAGETOOLS.COM OVERVIEW - CB-LP CONTROL BOX PNEUMATIC CONTROL BOX CB-LP X/Y POSITIONER CONTROL UP/DOWN PLACE HOLDER FOR OPTIONAL DUMP KIT (CB 049-K) X/Y POSITIONER CONTROL RIGHT/LEFT LANCE FEED SPEED CONTROLS AIR SUPPLY VALVE FOR ROTATION LANCE FEED CONTROL CONTROL BOX CONTROL BOX FRONT VIEW REAR VIEW AIR SUPPLY FITTING COLOR CODED JIC FITTINGS COLOR CODED JIC FITTINGS WITH DUST CAPS DETACHABLE LEGS WITH DUST CAPS **SEE “PART DIAGRAM” SECTION AT THE BACK OF THIS MANUAL FOR MORE DETAILED PART BREAK DOWNS. CB158 (X 7) 25’ (7.6 m) x 1/2” DIAMETER PNEUMATIC SUPPLY HOSE 866-795-1586 • WWW.STONEAGETOOLS.COM 13 X/Y POSITIONER (LP-300-XX) PACKAGE CONTENTS X/Y POSITIONER (LP-300-XX) PACKAGE PARTS The diagrams below illustrate a simple overview of the main components included in the LP-300-XX package. The LP Carriage Assembly comes assembled with either Pneumatic or Hydraulic motors. LP 094-U CORNER ASSEMBLY (X 2) BR 008-BU-001 WEDGE BOLT (X 11) LP 076 SLOTTED VERTICAL RAIL (X 2) LP 094-L CORNER ASSEMBLY (X 2) LP 078-78 CROSS TIE (X 2) PNEUMATIC X/Y POSITIONER LP CARRIAGE ASSEMBLY -WJE LP 335-XX WHEEL KIT LEG OPTIONS (X4) -JE -WE -E -WC 14 866-795-1586 • WWW.STONEAGETOOLS.COM X/Y POSITIONER (LP-300-XX) ASSEMBLY ASSEMBLY STEPS FOR THE X/Y POSITIONER (LP-300-XX) 1. Assembling the base- All Wheel Kit options fasten to the cross beam with Wedge Bolts. If changing out the leg option is necessary, it can be done by removing the wedge bolts, replacing the leg option and fastening the wedge bolts as shown. Install all Wedge Bolts with an adjustable or 9/16” open end wrench. TIGHTEN WITH 9/16” WRENCH DETAIL TO SHOW ORIENTATION OF WEDGE BOLT LP 094-L CORNER ASSEMBLY (X 2) 2. Installing the LP Carriage Assembly- Set the Carriage Assembly onto the Wheel Kit Base. Be sure to center the mounting blocks between the rollers on each side of the Carriage Assembly. ROLLERS MOUNTING BLOCK 866-795-1586 • WWW.STONEAGETOOLS.COM 15 X/Y POSITIONER (LP-300-XX) ASSEMBLY ASSEMBLY STEPS FOR THE X/Y POSITIONER (LP-300-XX) CONTINUED...... 3. Assemble the Upper Frame Assembly on the ground as shown below. Slide Brace Clamps on but do not tighten the U-Bolts until the positioner is oriented to the tube bundle face. Install all Wedge Bolts with an adjustable or 9/16” open end wrench. LP 110 BRACE CLAMP (X 2) NOTICE LP 078-78 CROSS TIE Make sure the slotted sides of both vertical rails face the same direction. Make sure Brace Clamps are oriented as shown. BR 008-BU-001 WEDGE BOLT (X 4) LP 094-U CORNER ASSEMBLY (X 2) LP 076 SLOTTED VERTICAL RAIL (X 2) 4. Slide the vertical rails on the Upper Frame Assembly over the mounting blocks. Align the slots in the vertical rails with the gears on the Carriage Assembly. VERTICAL RAIL ROLLERS ALIGN GEAR WITH SLOTS IN RAIL ROLLERS 16 866-795-1586 • WWW.STONEAGETOOLS.COM X/Y POSITIONER (LP-300-XX) ASSEMBLY 5. Connect the Upward Air fitting (BLUE) to the Control Box (See Control Box Assembly Instructions) to move the Carriage Assembly approximately half way up the Vertical Rails. This will help drive the vertical rails into place and make it easier to install the Wedge Bolts. NOTICE Make sure the Carriage Assembly is level on both vertical rails before moving the Carriage up 6. Insert Wedge Bolts though the vertical rails and mounting blocks on both sides of the frame assembly. Tighten using an adjustable or 9/16” open end wrench. 866-795-1586 • WWW.STONEAGETOOLS.COM 17 X/Y POSITIONER (LP-300-XX) ASSEMBLY INSTALLATION OF BRACES AND PLACEMENT OF THE LANCE POSITIONER 7. Loosen both Brace Clamps and insert the Braces with the C-Clamp ends facing the tube bundle face. Do not tighten the Brace Clamps until the X/Y Positioner has been set in front of the tube bundle. BRACE CLAMPS LOOSEN 8. For lancing rails 15 feet (457 cm) or shorter, the lance positioner may be used as the only support for the lancing machine. The lance positioner should be placed back from the tube bundle face at 5 to 7 feet (152cm-213cm). If the bundle is on rollers, it should be positioned so the tube rows are horizontal. It is recommended that the positioner be placed on jacks for stability instead of on the wheels. Use the leveling jacks to further align the horizontal axis of the positioner with the tube rows. Connect the Braces to the tube bundle face. 5’-7’ (152cm-213cm) 18 866-795-1586 • WWW.STONEAGETOOLS.COM X/Y POSITIONER (LP-300-XX) ASSEMBLY 9. When the X/Y Positioner is in place, tighten the C-Clamps on the tube bundle face and the Brace Clamps on the X/Y Positioner. TIGHTEN WARNING The X/Y Lance Positioner MUST be rigidly mounted and tied back to tube bundle or other structure to support against thrust force of machine and reaction force of jetting nozzles. Machine MUST BE securely anchored to the tube bundle. Hydraulicking forces can potentially reach several thousand pounds and if not avoided, could result in death or serious injury if the machinery were to become unanchored. 866-795-1586 • WWW.STONEAGETOOLS.COM 19 REAR SUPPORT (LP-320) ASSEMBLY ASSEMBLY STEPS FOR THE REAR SUPPORT (LP-320) THE REAR SUPPORT IS RECOMMENDED FOR LANCING RAILS GREATER THAN 15 FEET (457 Cm) LONG. 1. Slide the Trolley Assembly onto the Top Beam. LP 310 TROLLEY LP 319 TOP BEAM 2. Atach the Top Beam to the Leg Assemblies with the Wedge Bolts and tighten with an adjustable or 9/16” open end wrench. 3. Using an adjustable or 9/16” open end wrench, fasten the two BJ 086.4 Links to the leg assemblies with the provided 3/8” Hex Head Bolts and Nylock Nuts. BR 008-BU-001 WEDGE BOLT (X 2) LP 319 TOP BEAM LP 310 TROLLEY BJ 086.4 LINK BJ 086.4 LINK 20 866-795-1586 • WWW.STONEAGETOOLS.COM REAR SUPPORT (LP-320) ASSEMBLY 4. Hook the UD 071-D Chain Hoist onto the Trolley, and the Rear Support is ready for use. UD 071-D CHAIN HOIST WARNING MAXIMUM WORKING LOAD NOT TO EXCEED 1000LBS (454 KG) 5. Set up the Rear Support behind the X/Y Positioner to catch the extension rail when set in place. 866-795-1586 • WWW.STONEAGETOOLS.COM 21 RIGID LANCING MACHINE AND ROTARY ASSEMBLY (BRLM 500-XX) & (BRLM 3XX-XX-XX) ASSEMBLING AND INSTALLING THE DRIVE RAIL 1. If an extension kit (BRLM 580) is used, insert the splice tube into the rear of the drive rail (the end without a slot) and slide the extension section over the splice tube. The extension rail has no slots and can be installed using either end. Use two wedge bolts oriented to pull and tighten these sections together. Splice the chain provided with the extension kit onto the chain from the drive section. 2. Loosen the Quick Release Handles on the Carriage Plate and place the completed Drive Rail between the sides of the Carriage Plate. The long slotted end should face up and be oriented toward the tube bundle face. 3. Secure the Drive Rail in position with the Quick Release Handles. QUICK RELEASE HANDLE DETAIL FRONT 22 866-795-1586 • WWW.STONEAGETOOLS.COM REAR RIGID LANCING MACHINE AND ROTARY ASSEMBLY (BRLM 500-XX) & (BRLM 3XX-XX-XX) THREADING THE CHAIN THROUGH THE DRIVE RAIL There are two possible mounting locations (one between each slot) on the underside of the Rail for the Drive Motor Assembly. These positions allow for clearance of channel heads or other obstructions. 4. Choose the desired slot location (the Drive Motor Assembly will be centered between two slots) and feed a tape measure down through the rear slot selected out to the end of the rail. 5. Use a piece of wire to attach one chain end to the tape measure, and pull the chain out through the slot. END OF CHAIN WIRED TO TAPE MEASURE MOUNTING LOCATIONS RE AR UNDERSIDE OF DRIVE RAIL FR ON T 6. Feed the Chain through and around the Front Idler gear. Then insert the Front Idler into the Drive Rail. Note the Front Idler gear is off center and should stick through the slot in the rail. Install the Wedge Bolt and tighten to secure the Idler Assembly to the rail. 7. REPEAT the entire procedure for Rear Idler assembly. NOTE: There is no slot in the Drive Rail for the Rear Idler. DO NOT CONNECT MASTER LINK CONNECTING THE ENDS OF THE CHAIN UNTIL THE DRIVE IS INSTALLED. MASTER LINK BR 008-BU-001 WEDGE BOLT FRONT IDLER BR 008-BU-001 WEDGE BOLT REAR IDLER FRONT IDLER CHAIN SLACK TO REMAIN FOR INSTALLATION OF DRIVE MOTOR ASSEMBLY REAR IDLER CHAIN PATH (ASSEMBLY IS SHOWN IN SECTION AND CHAIN IS COLORIZED FOR CLARITY) 866-795-1586 • WWW.STONEAGETOOLS.COM 23 RIGID LANCING MACHINE AND ROTARY ASSEMBLY (BRLM 500-XX) & (BRLM 3XX-XX-XX) THREADING THE CHAIN THROUGH THE DRIVE MOTOR ASSEMBLY 8. Set the Drive Motor Assembly upside down on the ground and remove the chain guard, the two outside sprockets, and only two of the rail clamps. Slightly loosen the other two clamps. LOOSEN RAIL CLAMPS CHAIN GUARD REMOVE RAIL CLAMPS OUTSIDE SPROCKETS 9. Center the Drive Motor Assembly between the two rail slots to receive the chain. 10. Thread the chain under the center sprocket. Attach but do not tighten all four rail clamps, two on each side of the rail. This will allow the Drive Assembly to rock back and forth for ease of installation of the two outside sprockets. RAIL CLAMPS (BOTH SIDES OF RAIL) RAIL SLOT RAIL SLOT CENTER SPROCKET 24 866-795-1586 • WWW.STONEAGETOOLS.COM RIGID LANCING MACHINE AND ROTARY ASSEMBLY (BRLM 500-XX) & (BRLM 3XX-XX-XX) 11. Install the Outside Sprockets by pulling back on the two bolts, inserting the sprockets and inserting the bolts back through the sprockets. The Sprockets should be under the chain as shown in the Chain Path below. OUTSIDE SPROCKET OUTSIDE SPROCKET CHAIN PATH 12. Replace the Chain Guard, Flat Washers, and Nylock Nuts. NOTE: Make sure to tighten all four rail clamps. RAIL CLAMPS (BOTH SIDES OF RAIL) CHAIN GUARD FLAT WASHER NYLOCK NUT 866-795-1586 • WWW.STONEAGETOOLS.COM 25 RIGID LANCING MACHINE AND ROTARY ASSEMBLY (BRLM 500-XX) & (BRLM 3XX-XX-XX) 13. Complete chain loop by attaching the chain to the chain hook link with (2) chain master links. Adjust the chain tension so there is about 1 inch of chain height for every 5 feet or rail length. This can be done by tightening the tension nut at the end of the rail. KEEPER CLIP X (2) SIDE PLATE X (2) CHAIN HEIGHT MASTER LINK PIN X (2) CHAIN TENSIONER ADJUSTMENT BOLT 14. Remove Rear Chain Guard and slide the Guide Blocks onto the rail and move them all the way to the front. Next, remove the Chain Hook from the Rotary Drive Carriage and slide the Rotary Drive Carriage onto the rail. It may be necessary to loosen the rollers on one side to make it easier to install. Be sure to tighten all the rollers and replace the guard once finished. CHAIN HOOK ROLLERS X4 DUAL ROTARY IS SHOWN HERE. STEPS 14-18 ARE THE SAME FOR SINGLE AND TRIPLE ROTARY REAR CHAIN GUARD ROTARY DRIVE CARRIAGE 26 GUIDE BLOCKS 866-795-1586 • WWW.STONEAGETOOLS.COM RIGID LANCING MACHINE AND ROTARY ASSEMBLY (BRLM 500-XX) & (BRLM 3XX-XX-XX) 15. Attach the Rear Stop to the Drive Rail. The exact position of the stop can be easily adjusted at a later time. Next, install the Chain Hook by slipping it through the carriage plate and in between the pins on the chain link. It often helps to move the carriage back and forth to lock it into place. REAR STOP ROCK CHAIN HOOK TO ENGAGE BOTH MASTER LINK PINS CARRIAGE PLATE MASTER LINK PINS 16. Attach the two Cable Coils to the carriage and to the front idler assembly using the slotted anchor bolts. Be sure not to tighten the bolt over 20 ft-lbs of torque or it may damage the cable. INSERT CABLE INSERT CABLE INSERT CABLE INSERT CABLE 866-795-1586 • WWW.STONEAGETOOLS.COM INSERT CABLE INTO SLOTTED BOLTS 27 RIGID LANCING MACHINE AND ROTARY ASSEMBLY (BRLM 500-XX) & (BRLM 3XX-XX-XX) 17. Attach the appropriate sized guide tube assembly to the front of the rail. Advance or retract the carriage so the end of the lance where the tip will be located is about two inches inside the front splash guard (about the length of the nozzle tip). Install the rear stop up against the rear carriage rollers at this point to set the retract stop point. On a vertical setup, the rear stop will be way up in the air and not easily adjusted later. TRIPLE LANCE GUIDE SINGLE LANCE DOUBLE LANCE TRIPLE LANCE 28 866-795-1586 • WWW.STONEAGETOOLS.COM RIGID LANCING MACHINE AND ROTARY ASSEMBLY (BRLM 500-XX) & (BRLM 3XX-XX-XX) Lances and Tips: Lances - It is recommended that high strength, high quality tubing be selected. The material selected should have adequate wall thickness for the pressure being used. Lances with larger inside diameters will minimize pressure drop at higher flows, but will be limited in their operating pressure. Tips - There are several different lance tip types; the most basic and cheapest is the steel tip with drilled orifices. Jet patterns can be selected to optimize unplugging or polishing. Since the lancing machine provides rotation, fewer and larger jets can be used. When rigid lancing on a securely supported lancing machine, there is no need to put in backward facing jets. While the drilled steel tip can be used up to 40,000 psi, orifice life at this pressure is less than 10 hours. At 20,000 psi, about 20 hours useful life can be expected, while at 10,000 psi (depending on water filtration) a drilled tip can last up to 40 hours. For the higher pressures, replaceable sapphire orifices can be used. Jet angles can be somewhat limited with the replaceable orifices; depending on the tip diameter, it may not be possible to put in radial porting. 866-795-1586 • WWW.STONEAGETOOLS.COM 29 PNEUMATIC CONTROL BOX AND LEG ASSEMBLY CB-LP CONTROL BOX ASSEMBLY The Control Box may be operated with or without installing the detachable legs. Remove the legs for portability or to operate the Control Box in smaller spaces. 1. To attach the legs, remove the lower bolts and nuts from the Control Box frame. 2. Install the detachable legs onto the tube inserts. 3. Install the lower bolts and nuts through the legs and tube inserts. Use a 7/16 in wrench and socket to tighten the bolts. LOWER BOLTS TUBE INSERT 30 866-795-1586 • WWW.STONEAGETOOLS.COM PNEUMATIC CONTROL BOX CONNECTIONS TO THE X/Y POSITIONER (LP-300) AND BRLM PNEUMATIC SUPPLY LINES 1. Remove the dust caps from the Joint Industry Council (JIC) fittings on the Control Box and the motors on the LP-300 and BRLM. 2. Following the “Pneumatic Supply Line Color Chart”, connect the hose ends to the fittings on the Control Box. Connect the air supply to the Control Box and blow out the hoses before connecting to them to the motors on the LP-300 and BRLM to remove any debris. 3. Immediately following the blow out procedure, connect the other end to the motors on the LP-300 and BRLM using the color coding on the JIC fittings. Use a 7/8 in. wrench to tighten the JIC Swivel nuts. 4. Test the Control Box before operating with high-pressure water to verify the control valves move the hose in the intended direction, and that the dump valve is working properly. PNEUMATIC SUPPLY LINE COLOR CHART FROM CONTROL BOX TO X/Y POSITIONER (LP-300) DOWN RIGHT UP LEFT FROM CONTROL BOX TO BRLM ROTATION LANCE FEED SPEED REVERSE LANCE FEED SPEED FORWARD MAIN AIR SUPPLY FITTING COLOR CODED CONNECTIONS ON X/Y POSITIONER (LP-300) AND BRLM FROM CONTROL BOX MAIN WATER SUPPLY HOSE 866-795-1586 • WWW.STONEAGETOOLS.COM 31 PNEUMATIC CONTROL BOX OPERATION CB-LP CONTROL BOX BRLM ROTARY CONTROLS• The ROTATION BALL VALVE CONTROL rotates the rigid lance. This control consists of a ball valve that is used to turn on/off the rotation of the lance. It can also be partially opened/closed to regulate the rotation speed. There is a single air line connected from the exit of the ball valve to the rotation port on the air motor; the port selected should rotate the lance in a direction to tighten the nozzle tip onto the lance. Always blow out the air hoses before connecting to the motor ports. • • The LANCE FEED DIRECTION SELECTOR will move the lance in the forward (feeding) and reverse (retracting) directions. The OFF position is at the 6 O’clock position. The FORWARD AND REVERSE LANCE FEED SPEED CONTROLS The two regulators are used to control the feed direction and speed as well as the push/pull force of the drive. RIGHT/LEFT X/Y POSITIONER ROTATION BALL VALVE CONTROL UP/DOWN X/Y POSITIONER LANCE FEED DIRECTION SELECTOR POSITIONER CONTROLS• UP/DOWN will move the X/Y Positioner (LP-300) up and down the tube face bundle. Turn selector to the left to move the assembly UP, Turn selector to the right to move the assembly down. • LEFT/RIGHT will move the X/Y Positioner (LP-300) from side to side along the tube face bundle. Turn selector to the left to move the assembly Right, Turn selector to the right to move the assembly Left. *OPTIONAL DUMP CONTROL TOGGLE• To use the PNEUMATIC DUMP CONTROL TOGGLE, hold it in the 12 O’clock, HIGH PRESSURE ON position to route the high-pressure water to the tool. Release the toggle to the OFF position to release the high-pressure water away from the tool. * LOCATION FOR OPTIONAL PNEUMATIC DUMP CONTROL TOGGLE DETAIL A FORWARD & REVERSE LANCE FEED SPEED CONTROLS AIR SUPPLY FITTING • A universal AIR SUPPLY FITTING (Chicago style) is located on the back of the Control Box. Connect a compatible compressed air line (not included) according to the manufacturer’s instructions. If another pneumatic connection is preferred, this fitting can be removed and any male adapter may be used. *OPTIONAL PNEUMATIC DUMP CONTROL FITTING AND LINE • Install the PNEUMATIC DUMP CONTROL TOGGLE on the control panel as shown in Detail A. Remove and discard the 3/8 NPT pipe plug and replace with HRS 564 Fitting with Teflon tape. Cut and Install the included, ¼ in OD tubing (HRS 565) by pushing the tubing into the fitting to connect the HRS 564 Fitting to the pneumatic dump valve. Detail B 32 866-795-1586 • WWW.STONEAGETOOLS.COM HRS 564 DUMP CONTROL FITTING 1/4 IN. O.D. TUBING CONTROL BOX DETAIL B SYSTEM OPERATION X/Y POSITIONER AND BRLM SYSTEM OPERATION 1. Make sure the far end of the tube bundle is flagged off and no one is within this area. A deflector plate is recommended for debris and water, particularly in horizontal bundles. 2. Turn the Forward Speed Control on the control box down to zero, switch the selector valve to “FORWARD” and slowly increase the speed until the carriage begins to move, switch the selector valve back to “OFF”, leaving the regulator at this low setting. Think of the regulators as controlling push force as well as speed. 3. Advance the carriage on the lancing machine until the tip is just inside the first tube if it is open or partially open; if it is a plugged tube, do not drive the tip into the material until the water pressure has started to come up; stop just short of the tip entering the tube. 4. Start the rotation of the lances and close the dump valve; bring the pressure up slowly with the pump throttle or bypass valve. If it is a plugged tube, advance the tip into the material. 5. Once operating pressure is reached, advance the lance into the tube. The forward regulator setting may need to be increased at this time to make the carriage move, as the jet thrust may be pushing back against the feed. Gradually increase the forward regulator, which is increasing the push force as well as the feed rate. Watch the lances to make sure they are not starting to flex; if they are, slightly decrease the regulator setting and leave it at this point. Also watch the machine and positioner for evidence of increasing load. If the machine hydraulicks more than once or twice while cleaning every tube, the feed rate should be decreased to prevent this. Hydraulicking forces can be high enough to bend and destroy the lances; they can pick up a vertical machine, positioner and scaffold with two people standing on platforms (at least 500 pounds). Once an optimum feed rate is determined, the regulator has an adjustable stop that can be set and repeatedly returned to if desired. 6. If the tubes are open and only being polished, there is an optimum feed rate to allow the jets to achieve complete coverage; multiply the number of jets by the orifice size of the jets and the rotation speed of the lance (600 rpm if the rotation speed is set on full). The result will be the feed rate in inches per minute to achieve complete jet coverage. Sometimes the material may require multiple jet strikes to be removed. The only way to determine this is to complete a cleaning pass at a certain speed, then check the tube for cleaning effectiveness and adjust the feed rate accordingly. If desired, set the adjustable stop in the regulator. 7. The direction of the carriage should be reversed when the operator hears or observes the jets exiting at the far end of the tube bundle. The retract regulator can be slowed to allow an additional cleaning pass on the return stroke, or retracted at full speed if the forward cleaning pass is sufficient. Dump the pressure when the jets begin to exit the tube. Once a tube is cleaned and the nozzle tip retracted to clear the tube, use the positioner to move the machine to the next tube or tubes in that row. A practiced operator will be able to align the machine very quickly and likely in one move, but an inexperienced operator should take time initially to make sure the tip is aligned, otherwise the tip will run into the tube face and possibly bend and destroy a lance, particularly if the forward regulator is set at a high push/feed rate. Leaving the forward speed slower helps with tube alignment for an inexperienced operator. MAINTENANCE Maintenance Item Maintenance Required Air Supply A compressed air source of at least 70 cfm at 80 psi is required. Lower pressure will result in slower rotation and feed rates. Blow air through all hoses before connecting. Drain the filter bowl if it fills with water. Rail The lance rail should be kept clean. Do not apply any lubrication to the rail, as this tends to collect grit and increase wear. Chain Spray with a light oil occasionally to prevent corrosion Air Motor Air motors should be lubricated after use to prevent internal corrosion and seizing. To do this, remove air hose from motor fitting and squirt in some light oil. Reconnect air line and run for a few seconds to distribute oil in motor. If the air motor seizes and does not run, remove air motor from gearbox, squirt some oil into ports, and try to rotate motor shaft with wrench until it breaks free. This does have the risk of damaging the vanes in the motor, but usually is successful. COLD WEATHER OPERATION: StoneAge recommends the following solutions to prevent decreased functionality in air motors during cold weather operations: Best method: Use regenerative desiccant air dryers in-line with the pneumatic hoses to lower the dew point. Next method: Use a Pneumatic Tool Anti- Freeze Lubricant in the oiler system of the StoneAge equipment. Common trade names are Tanner Gas, Killfrost, Dixon, and Polar-lube. These fluids act like gasoline antifreeze by drying out moisture that’s in the line 866-795-1586 • WWW.STONEAGETOOLS.COM 33 OVERVIEW- X/Y POSITIONER WITH AUTOBOX® FLEX LANCING ADAPTER X/Y POSITIONER LP-300-XX WITH AUTOBOX® FLEX LANCING ADAPTER ACCESSORY LP-300-XX X/Y POSITIONER AUTOBOX® ABX-2L OR ABX-3L AND HOSE GUIDE CB-ABX OR CBX-ABX CONTROL BOX **SHOWN WITH THE AUTOBOX® ABX-3L AND CBX-ABX CONTROL BOX ABX-300-LP INTERFACE ASSEMBLY FOR ADAPTING THE AUTOBOX ABX-3L TO THE X/Y POSITIONER CB-TBX-LPA TUMBLE BOX AND PNEUMATIC LINES FOR ADAPTING 1/4” AIRLINES FROM THE AUTOBOX CONTROL BOX TO 1/2” AIR LINES ON THE LP-300-XX X/Y POSITIONER 34 866-795-1586 • WWW.STONEAGETOOLS.COM ABX-100-LP INTERFACE ASSEMBLY FOR ADAPTING THE AUTOBOX ABX-2L TO THE X/Y POSITIONER INSTALL CB-TBX-LPA TUMBLE BOX ONTO AUTOBOX® CONTROL BOX ASSEMBLE CONTROL BOX, TUMBLE BOX, FRL, AND TRIPOD BASE 5. Slide the Control Box over the vertical tube. The Control Box has a stop that keeps it located at the top of the vertical tube. Secure with the supplied thumbscrew knob. 1. Setup the tripod base in a location with good visibility to the bundle face, but at a safe distance away from waterblast zone. 6. Install and tighten the two short 1/2 in. (13 mm) I.D. hoses. The Tumble Box is marked with “CB” and “FRL”. Connect the hose marked “CB” to connection marked “AIR” on the back of the Control Box. Connect the hose marked “FRL” to the FRL. 2. Slide the vertical tube into the tripod base. Secure with the supplied thumbscrew knob. Note: The vertical tube has a hole through one wall that the thumbscrew must engage. 7. Install and tighten the four short 1/4” hoses from the Tumble Box to the Control Box. The Tumble Box is marked “L/R” for Left and Right and “U/D” for Up and Down. Follow the diagram and color coding below. 3. Slide the Filter, Regulator, Lubricator (FRL) assembly over the vertical tube down to the tripod base. Secure with the supplied thumbscrew knob. 4. Slide the Tumble Box over the vertical tube and align the top of the clamp with the top of the FRL. Secure with the supplied thumbscrew knob CB-ABX OR CBX-ABX CONTROL BOX 5 TUMBLE BOX (CBX-TBX-LPA) 4 VERTICAL TUBE 2 1/2” LINES (X 2) 6 7 1/4” LINES (X 4) FRL 3 THUMBSCREW TRIPOD STAND 1 6 866-795-1586 • WWW.STONEAGETOOLS.COM 35 ABX-XXX-LP INSTALLATION ONTO X/Y POSITIONER CARRIAGE CONNECT ABX-XXX-LP BEAM TO X/Y POSITIONER CARRIAGE 1. Loosen the Quick Release Handles on the Carriage Plate and place the Beam between the sides of the Carriage Plate. The ABX-300LP (for the ABX-3L) has integral plates on the bottom that engage the Carriage. The ABX-100-LP (for the ABX-2L) has corner edges that will engage with the Carriage. Secure the Beam in position with the Quick Release Handles. **SHOWN WITH THE ABX-300-LP QUICK RELEASE HANDLE DETAIL INTEGRAL PLATES CONNECT AUTOBOX® TRACTOR TO ABX-XXX-LP BEAM 2. Remove the bottom Quick Release Pin from the AUTOBOX® Mounting Bracket. Set the top Quick Release Pin into the top groove on the Beam. Insert the Bottom Pin and make sure both pins are secure. AUTOBOX TRACTOR QUICK RELEASE PINS 36 866-795-1586 • WWW.STONEAGETOOLS.COM BOTTOM QUICK RELEASE PIN ABX-XXX-LP INSTALLATION ON X/Y POSITIONER CONNECT HOSE GUIDE TO BEAM 3. Remove the bottom Quick Release Pin from the Hose Guide. Slip the top groove of the Hose Guide under the top Quick Release Pin on the Beam. Insert the Bottom Pin and make sure both pins are secure. BOTTOM QUICK RELEASE PIN TOP GROOVE OF HOSE GUIDE ASSEMBLY IS NOW READY FOR PNEUMATIC CONNECTIONS 866-795-1586 • WWW.STONEAGETOOLS.COM 37 CONTROL BOX TO X/Y POSITIONER AND AUTOBOX TRACTOR CONNECTION PNEUMATIC SUPPLY LINE CONNECTIONS 1. Remove the dust caps from the Joint Industry Council (JIC) fittings of the Control Box and the AUTOBOX® Hose Tractor. 2. Connect the AUTOBOX® Hose Tractor to the Control Box with two 1/2 in. (13 mm) JIC hoses and one 1/4 in. (6 mm) JIC hose. Verify the Control Box rotates the rollers in the appropriate direction and that the clamp functions correctly. (See color coding below) 3. Connect the Horizontal Positioner Drive air motor to the “RGT/LFT” connections on the Tumble Box with two 1/2 in. (13 mm) JIC hoses. Verify the Control Box moves the horizontal carriage in the appropriate direction. (See color coding below) 4. Connect the Vertical Positioner Drive air motor to the “UP/DWN” connections on the Tumble Box with two 1/2 in. (13 mm) JIC hoses. Verify the Control Box moves the vertical carriage in the appropriate direction. (See color coding below) 5. Test the Control Box before operating the AUTOBOX® Hose Tractor with high pressure water to verify the control valves move the hose in the intended direction, and that the dump valve is working properly. (See the appropriate AUTOBOX® Hose Tractor manual for detailed operating instructions.) COLOR CODED CONNECTIONS FROM CONTROL BOX TO AUTOBOX® TRACTOR FWD REV CLAMP CONTROL BOX AUTOBOX TRACTOR PNEUMATIC SUPPLY LINE COLOR CHART DOWN RIGHT UP LEFT HORIZONTAL POSITIONER DRIVE 38 866-795-1586 • WWW.STONEAGETOOLS.COM VERTICAL POSITIONER DRIVE PARTS DIAGRAMS TABLE OF CONTENTS ABX-100-LP ABX-2L TO LP-300 INTERFACE ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . 4 0 ABX-300-LP ABX-3L TO LP-300 INTERFACE ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . 4 0 BRLM 180 DUAL ROTARY GEARBOX.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1 BRLM 210-CS TRIPLE ROTARY GEARBOX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2 BRLM 310-P8 SINGLE ROTARY ASSEMBLY 15 KPSI. . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 BRLM 320 SINGLE ROTARY ASSEMBLY 22 KPSI.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4 BRLM 330 SINGLE ROTARY ASSEMBLY 44 KPSI.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 5 BRLM 341 DUAL ROTARY ASSEMBLY 15 KPSI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 6 BRLM 351 DUAL ROTARY ASSEMBLY 22 KPSI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 7 BRLM 361 DUAL ROTARY ASSEMBLY 44 KPSI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 8 BRLM 343-CS TRIPLE ROTARY ASSEMBLY 15 KPSI. . . . . . . . . . . . . . . . . . . . . . . . . . 4 9 BRLM 353-CS TRIPLE ROTARY ASSEMBLY 22 KPSI. . . . . . . . . . . . . . . . . . . . . . . . . . 5 0 BRLM 363-CS TRIPLE ROTARY ASSEMBLY 44 KPSI. . . . . . . . . . . . . . . . . . . . . . . . . . 5 1 BRLM 420 REAR IDLER ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 BRLM 430 FRONT IDLER ASSEMBLY.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 BRLM 500-XX RIGID LANCING MACHINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 BRLM 500.1 DRIVE PACKAGE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 BRLM 510-EG FEED DRIVE ASSEMBLY (ELECTRA-GEAR). . . . . . . . . . . . . . . . . . . . 5 4 BRLM 580-XX RAIL EXTENSION PACKAGE.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 5 BRLM 636-XXX-XXX GUIDE BLOCK KITS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 6 CB-LP CONTROL BOX FOR LP-300 X/Y POSITIONER. . . . . . . . . . . . . . . . . . . . . . . . . 5 7 CB-LP.1 CONTROL BOX INTERNALS FOR LP-300 X/Y POSITIONER. . . . . . . . . . . . 5 8 CB-TBX-LPA LPA TUMBLEBOX ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 9 LP-300-XX X/Y POSITIONER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 0 LP-300-XX X/Y POSITIONER CONTINUED. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1 LP 320 REAR SUPPORT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2 LP 335-XX WHEEL KITS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 LP 700 CARRIAGE CLAMP ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 LP 071 2 SIDE PLATES AND ROLLER ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 866-795-1586 • WWW.STONEAGETOOLS.COM 39 PARTS DIAGRAM AUTOBOX® (ABX-100-LP) ABX-2L TO LP-300 INTERFACE ASSEMBLY # PART NUMBER QTY. 1 ABX 001-LP REAR BRACKET 1 2 ABX 002-LP BOX RAIL 1 3 ABX 003-LP GUIDE TUBE 2 4 ABX 120-001 MOUNTING BRACKET, INSIDE 1 5 ABX 298 QUICK PIN 17-4 SS .38 X 3.0 2 6 GSF 337-03 FHCS .37-16 X .75 SS 8 AUTOBOX® (ABX-300-LP) ABX-3L TO LP-300 INTERFACE ASSEMBLY # 40 PART NUMBER QTY. 5 ABX 304-LP FRONT BRACKET 1 2 1 ABX 003-LP GUIDE TUBE 3 6 ABX 356 QUICK PIN 17-4 SS .38 X 3.75 2 ABX 301-LP REAR BRACKET 1 7 GSF 325-06 FHCS .25-20 X 1.50 SS 8 3 ABX 302-LP RAIL 1 8 GSF 337-03 FHCS .37-16 X .75 SS 12 4 ABX 303-LP RAIL BOTTOM PLATE 2 866-795-1586 • WWW.STONEAGETOOLS.COM PARTS DIAGRAM BRLM 180 DUAL ROTARY GEARBOX # QTY. 16 BRLM 192 SHAFT, INTERMEDIATE 1 1 BR 155 MUFFLER P8 PART NUMBER 1 17 BRLM 193 SPACER,FINAL SHAFT 1 2 BR 167 DUST CAP J8 1 18 BRLM 195 KEY, SQ .250 X .250 X .75 2 3 BRLM 024-SA BLOCK, MOUNT STD 2 19 FS 004-0 ZERK, STRAIGHT 1 4 BRLM 109 BEARING 4 20 GB 531-06 BOLT, HEX .31-18 X 1.50 4 5 BRLM 172 BOSTONGEAR-GB20 2 21 GP 010-P PLASTIC ID WASHER P8 1 6 BRLM 174 BOSTONGEAR-GB30 1 22 GSF 325-035 FHCS .25-20 X .88 SS 18 7 BRLM 176 BOSTONGEAR-GB38 1 23 GSS 525-28-37CU SET SCREW, CUP PT 1 8 BRLM 178 BOSTONGEAR-NB30B-1 2 24 GW 531-L LOCK WASHER 4 9 BRLM 182 HOUSING, SPUR 1 25 HRS 510 GEAR, 15T 1 10 BRLM 183 PLATE, COVER REAR 1 26 HRS 510.2 COLLAR ASSY, PINION 1 11 BRLM 184 PLATE, COVER FRONT 1 27 HRS 515 GEAR BUSHING 2 12 BRLM 186 SHAFT, SPUR GEAR 2 28 HRS 518 RETAINING RING, SL EXTERNAL 4 13 BRLM 188 SHIM, SS 2 29 HRS 529 THRUST WASHER 4 14 BRLM 190 SHAFT, FINAL 1 30 HRS 573 FTG, ELBOW 90 P8M J8M 1 15 BRLM 191 SPRING PIN, .125 X .75 2 31 SG 055 AIR MOTOR 1 866-795-1586 • WWW.STONEAGETOOLS.COM 41 PARTS DIAGRAM BRLM 210-CS TRIPLE ROTARY GEARBOX # 42 QTY. 16 BRLM 212 BOSTONGEAR-GB28 1 1 BR 155 MUFFLER P8 PART NUMBER 1 17 BRLM 213 BOSTONGEAR-GB37 1 2 BR 167 90° DUST CAP J8 1 18 BRLM 215 GEAR BUSHING MOD 1 3 BRLM 024-SA BLOCK, MOUNT STD 2 19 FS 004-0 ZERK, STRAIGHT 1 4 BRLM 172 BOSTONGEAR-GB20 3 20 GB 531-06 BOLT, HEX .31-18 X 1.50 4 5 BRLM 182 HOUSING, SPUR 1 21 GP 010-P PLASTIC ID WASHER P8 1 6 BRLM 186 SHAFT, SPUR GEAR 3 22 GSF 325-035 FHCS .25-20 X .88 SS 18 7 BRLM 190 SHAFT, FINAL 2 23 GSS 525-28-37CU SET SCREW, CUP PT 1 8 BRLM 191 SPRING PIN, .125 X .75 3 24 GW 531-L LOCK WASHER 4 9 BRLM 192 SHAFT, INTERMEDIATE 1 25 HRS 510 GEAR, 15T 1 10 BRLM 195 KEY, SQ .250 X .250 X .75 3 26 HRS 510.2 COLLAR ASSY, PINION 1 11 BRLM 201 BEARING 6 27 HRS 515 GEAR BUSHING 2 12 BRLM 203 PLATE, COVER REAR 1 28 HRS 518 RETAINING RING, SL EXTERNAL 5 13 BRLM 204 PLATE, COVER FRONT 1 29 HRS 529 THRUST WASHER 5 14 BRLM 207 SPACER, SPUR SHAFT 6 30 HRS 573 FTG, ELBOW 90 P8M J8M 1 15 BRLM 211 GEAR, MODIFIED 3 31 SG 055 AIR MOTOR 1 866-795-1586 • WWW.STONEAGETOOLS.COM PARTS DIAGRAM BRLM 310-P8 SINGLE ROTARY ASSEMBLY 15 KPSI # QTY. 16 BRLM 170 P16 NIPPLE 1 34 GN 550-L NYLOK NUT 4 1 BR 052-2.5 AXLE-ZERK PART NUMBER 4 17 BRLM 270 CLAMP, HOSE 2 35 GP 010-P PLASTIC ID WASHER P8 1 2 BR 055 ROLLER ASSY 4 18 BRLM 271 PLATE, HOSE CLAMP 1 38 GP 075-375 COLLET 3 3 BR 155 MUFFLER P8 1 19 BRLM 272 PLATE, TAIL END 1 39 GP 075-406 COLLET 3 4 BR 157 FTG, ADAPTER P8M J8M 1 20 BRLM 273 TAIL CHAIN 1 40 GP 075-547 COLLET 3 5 BR 167 DUST CAP J8 1 22 GB 525-12 BOLT, HEX .25-20 X 3.00 4 41 GP 075-562 COLLET 3 6 BR 190-E5 GEARBOX WITH SHAFT, EG 5TO1 1 23 GB 531-03 BOLT, HEX .31-18 X .75 2 42 GP 076 COLLET NUT 3 24 GB 531-04 BOLT, HEX .31-18 X 1.00 4 44 GW 531-L LOCK WASHER 2 7 BRLM 018-D PLATE, DUAL COIL 1 25 GB 531-06 BOLT, HEX .31-18 X 1.50 2 45 GW 537-F FLAT WASHER 2 8 BRLM 019 CHAIN HOOK 1 26 GB 531-07 BOLT, HEX .31-18 X 1.75 4 46 GW 537-L LOCK WASHER 4 9 BRLM 022 CARRIAGE PLATE 1 27 GB 537-04 BOLT, HEX .37-16 X 1.00 4 47 LM 012-06 BUSHING, FRONT 1 10 BRLM 024-EG PEDESTAL 2 28 GB 537-05 BOLT, HEX .37-16 X 1.25 2 48 LM 012-09 BUSHING, FRONT 1 11 BRLM 027-SGS BRACKET, TAIL, SG SINGLE 1 29 GB 537-08 BOLT, HEX .37-16 X 2.00 1 49 LM 014 NIPPLE 1 12 BRLM 036 BOLT, COIL ANCHOR 2 30 GB 537-09 BOLT, HEX .37-16 X 2.25 1 50 LM 016-4 AIR MOTOR 1 13 BRLM 040-1 FRONT PLATE 1 31 GN 525-L NYLOK NUT 4 54 SA 056-P8P2 LANCE ADPT 1 14 BRLM 150 SPLASH GUARD 1 32 GN 531-L NYLOK NUT 6 55 SA 056-P8P4 LANCE ADPT 1 15 BRLM 160 P16 TEE 1 33 GN 537-L NYLOK NUT 4 56 SG-P8P8-0 SWIVEL 1 866-795-1586 • WWW.STONEAGETOOLS.COM 43 PARTS DIAGRAM BRLM 320-MP12 SINGLE ROTARY ASSEMBLY 22 KPSI # QTY. AF 071-MP6 COLLAR 1 2 AF 071-MP9 COLLAR 1 3 AF 072-MP6 ANTIVIBE,GLAND ASSY 1 4 AF 072-MP9 ANTIVIBE, GLAND ASSY 1 5 AF 073-MP6MP12 COUPLING 1 6 AF 073-MP9MP12 COUPLING 1 7 BR 052-2.5 AXLE-ZERK 4 8 BR 055 ROLLER ASSY 4 9 BR 155 MUFFLER P8 1 10 BR 157 FTG, ADAPTER P8M J8M 1 11 BR 167 DUST CAP J8 1 12 44 PART NUMBER 1 17 BRLM 027-SGS BRACKET, TAIL, SG SINGLE 1 18 BRLM 036 BOLT, COIL ANCHOR 2 19 BRLM 040-1 FRONT PLATE 1 20 BRLM 150 SPLASH GUARD 1 21 BRLM 160 P16 TEE 1 22 BRLM 170 P16 NIPPLE 1 23 BRLM 270 CLAMP, HOSE 2 24 BRLM 271 PLATE, HOSE CLAMP 1 25 BRLM 272 PLATE, TAIL END 1 26 BRLM 273 TAIL CHAIN 1 28 GB 525-12 BOLT, HEX .25-20 X 3.00 4 29 GB 531-03 BOLT, HEX .31-18 X .75 2 30 GB 531-04 BOLT, HEX .31-18 X 1.00 4 BR 190-E5 GEARBOX WITH SHAFT, EG 5TO1 1 13 BRLM 018-D PLATE, DUAL COIL 1 31 GB 531-06 BOLT, HEX .31-18 X 1.50 2 14 BRLM 019 CHAIN HOOK 1 32 GB 531-07 BOLT, HEX .31-18 X 1.75 4 15 BRLM 022 CARRIAGE PLATE 1 33 GB 537-04 BOLT, HEX .37-16 X 1.00 4 16 BRLM 024-EG PEDESTAL 2 34 GB 537-05 BOLT, HEX .37-16 X 1.25 2 35 GB 537-08 BOLT, HEX .37-16 X 2.00 1 866-795-1586 • WWW.STONEAGETOOLS.COM 36 GB 537-09 BOLT, HEX .37-16 X 2.25 1 37 GN 525-L NYLOK NUT 4 38 GN 531-L NYLOK NUT 6 39 GN 537-L NYLOK NUT 4 40 GN 550-L NYLOK NUT 4 41 GP 010-P PLASTIC ID WASHER P8 1 44 GP 075-375 COLLET 2 45 GP 075-562 COLLET 2 46 GP 076 COLLET NUT 2 48 GW 531-L LOCK WASHER 2 49 GW 537-F FLAT WASHER 2 50 GW 537-L LOCK WASHER 4 51 LM 012-06 BUSHING, FRONT 1 52 LM 012-09 BUSHING, FRONT 1 53 LM 014 NIPPLE 1 54 LM 016-4 AIR MOTOR 1 57 LM 123 FTG, ADAPTER ORB6M J8M - 58 SG-MP12AV12-0 SWIVEL 1 PARTS DIAGRAM BRLM 330 SINGLE ROTARY ASSEMBLY 44 KPSI # PART NUMBER QTY. 1 AF 071-H6 COLLAR 1 2 AF 071-H9 COLLAR 1 3 AF 072-H6 ANTIVIBE, GLAND ASSY 1 4 AF 072-H9 ANTIVIBE, GLAND ASSY 1 5 AF 073-H6 COUPLER 1 6 AF 073-H6H9 COUPLER 1 17 BRLM 027-JES BRACKET, TAIL JE SINGLE PLATE 1 18 BRLM 036 BOLT, COIL ANCHOR 2 19 BRLM 040-1 FRONT PLATE 1 20 BRLM 150 SPLASH GUARD 1 21 BRLM 160 P16 TEE 1 22 BRLM 170 P16 NIPPLE 1 23 BRLM 270 CLAMP, HOSE 2 24 BRLM 271 PLATE, HOSE CLAMP 1 25 BRLM 272 PLATE, TAIL END 1 26 BRLM 273 TAIL CHAIN 1 28 GB 525-12 BOLT, HEX .25-20 X 3.00 4 29 GB 531-03 BOLT, HEX .31-18 X .75 2 30 GB 531-04 BOLT, HEX .31-18 X 1.00 4 7 BR 052-2.5 AXLE-ZERK 4 8 BR 055 ROLLER ASSY 4 9 BR 155 MUFFLER P8 1 10 BR 157 FTG, ADAPTER P8M J8M 1 11 BR 167 DUST CAP J8 1 12 BR 190-E5 GEARBOX WITH SHAFT, EG 5TO1 1 13 BRLM 018-D PLATE, DUAL COIL 1 31 GB 531-06 BOLT, HEX .31-18 X 1.50 2 14 BRLM 019 CHAIN HOOK 1 32 GB 531-07 BOLT, HEX .31-18 X 1.75 4 15 BRLM 022 CARRIAGE PLATE 1 33 GB 537-04 BOLT, HEX .37-16 X 1.00 4 16 BRLM 024-EG PEDESTAL 2 34 GB 537-05 BOLT, HEX .37-16 X 1.25 2 35 GB 537-08 BOLT, HEX .37-16 X 2.00 1 36 GB 537-09 BOLT, HEX .37-16 X 2.25 1 37 GN 525-L NYLOK NUT 4 38 GN 531-L NYLOK NUT 6 39 GN 537-L NYLOK NUT 4 40 GN 550-L NYLOK NUT 4 41 GP 010-P PLASTIC ID WASHER P8 1 44 GP 075-375 COLLET 2 45 GP 075-562 COLLET 2 46 GP 076 COLLET NUT 2 47 GS 525-025-28 SHCS .25-28 X .62 BLK - 48 GW 531-L LOCK WASHER 2 49 GW 537-F FLAT WASHER 2 50 GW 537-L LOCK WASHER 4 51 LM 012-06 BUSHING, FRONT 1 52 LM 012-09 BUSHING, FRONT 1 53 LM 014 NIPPLE 1 54 LM 016-4 AIR MOTOR 1 57 LM 123 FTG, ADAPTER ORB6M J8M - 58 UH-H9H6 SWIVEL ASSEMBLY 1 866-795-1586 • WWW.STONEAGETOOLS.COM 45 PARTS DIAGRAM BRLM 341 DUAL ROTARY ASSEMBLY 15 KPSI 46 # PART NUMBER QTY. 14 BRLM 269-P12 MANIFOLD 1 28 GN 550-L NYLOK NUT 4 1 AF 061-P4 ADAPTER .75 TYPE M TO P4 2 15 BRLM 272 PLATE, TAIL END 1 29 GP 075-375 COLLET 3 2 AF 061-P8 ADAPTER .75 TYPE M TO P8 2 16 BRLM 273 TAIL CHAIN 1 30 GP 075-406 COLLET 3 3 BR 052-2.5 AXLE-ZERK 4 17 GB 525-04 BOLT, HEX .25-20 X 1.00 2 31 GP 075-547 COLLET 3 4 BR 055 ROLLER ASSY 4 18 GB 525-10 BOLT, HEX .25-20 X 2.50 2 32 GP 075-562 COLLET 6 5 BRLM 018-D PLATE, DUAL COIL 1 19 GB 531-03 BOLT, HEX .31-18 X .75 2 33 GP 076 COLLET NUT 6 6 BRLM 019 CHAIN HOOK 1 20 GB 531-04 BOLT, HEX .31-18 X 1.00 4 34 GW 531-L LOCK WASHER 6 7 BRLM 022 CARRIAGE PLATE 1 21 GB 531-06 BOLT, HEX .31-18 X 1.50 2 35 GW 537-F FLAT WASHER 2 8 BRLM 027-SLD BRACKET, TAIL, SL DUAL 1 22 GB 537-04 BOLT, HEX .37-16 X 1.00 2 36 ML 072-P2 GUIDE, LONG ADJ 2 9 BRLM 036 BOLT, COIL ANCHOR 2 23 GB 537-08 BOLT, HEX .37-16 X 2.00 1 37 ML 072-P4-L GUIDE, LONG ADJ 1 10 BRLM 041 MULTI CHANNEL 1 24 GB 537-09 BOLT, HEX .37-16 X 2.25 1 38 ML 072.1 SPRING NUT 2 11 BRLM 180 DUAL ROTARY GBOX ASSY - SPUR 1 25 GN 525-L NYLOK NUT 2 39 SA 056-P4P2 LANCE ADPT 1 26 GN 531-L NYLOK NUT 2 40 SA 056-P4P4 LANCE ADPT 2 13 BRLM 268-003 HOSE 2 27 GN 537-L NYLOK NUT 2 41 SL-P8P4-0 SWIVEL 2 866-795-1586 • WWW.STONEAGETOOLS.COM PARTS DIAGRAM BRLM 351 DUAL ROTARY ASSEMBLY 22 KPSI # PART NUMBER QTY. 14 BRLM 027-SLD BRACKET, TAIL, SL DUAL 1 15 BRLM 036 BOLT, COIL ANCHOR 2 16 BRLM 041 MULTI CHANNEL 1 17 BRLM 180 DUAL ROTARY GBOX ASSY - SPUR 1 1 AF 061-MP6 ADAPTER .75 TYPE M TO MP6 2 2 AF 061-MP9 ADAPTER .75 TYPE M TO MP9 2 3 AF 071-MP6 COLLAR 2 4 AF 071-MP9 COLLAR 2 19 BRLM 268-003 HOSE 2 5 AF 072-MP6 ANTIVIBE,GLAND ASSY 2 20 BRLM 269-MP12 MANIFOLD 1 6 AF 072-MP9 ANTIVIBE, GLAND ASSY 2 21 BRLM 272 PLATE, TAIL END 1 7 AF 073-MP6MP9 COUPLING 2 22 BRLM 273 TAIL CHAIN 1 8 AF 073-MP9 COUPLER 2 23 GB 525-04 BOLT, HEX .25-20 X 1.00 2 9 BR 052-2.5 AXLE-ZERK 4 24 GB 525-10 BOLT, HEX .25-20 X 2.50 2 10 BR 055 ROLLER ASSY 4 25 GB 531-03 BOLT, HEX .31-18 X .75 2 11 BRLM 018-D PLATE, DUAL COIL 1 26 GB 531-04 BOLT, HEX .31-18 X 1.00 4 12 BRLM 019 CHAIN HOOK 1 27 GB 531-06 BOLT, HEX .31-18 X 1.50 2 13 BRLM 022 CARRIAGE PLATE 1 28 GB 537-04 BOLT, HEX .37-16 X 1.00 2 29 GB 537-08 BOLT, HEX .37-16 X 2.00 1 30 GB 537-09 BOLT, HEX .37-16 X 2.25 1 31 GN 525-L NYLOK NUT 2 32 GN 531-L NYLOK NUT 2 33 GN 537-L NYLOK NUT 2 34 GN 550-L NYLOK NUT 4 35 GP 075-375 COLLET 2 36 GP 075-562 COLLET 4 37 GP 076 COLLET NUT 4 38 GW 531-L LOCK WASHER 6 39 GW 537-F FLAT WASHER 2 40 ML 072-P2 GUIDE, LONG ADJ 2 41 ML 072-P4-L GUIDE, LONG ADJ 2 42 ML 072.1 SPRING NUT 2 43 SL-MP9AV9-0 SWIVEL 2 866-795-1586 • WWW.STONEAGETOOLS.COM 47 PARTS DIAGRAM BRLM 361 DUAL ROTARY ASSEMBLY 44 KPSI # QTY. 15 BRLM 036 BOLT, COIL ANCHOR 2 30 GB 537-09 BOLT, HEX .37-16 X 2.25 1 1 AF 070-H6 GLAND HP 2 16 BRLM 041 MULTI CHANNEL 1 31 GN 525-L NYLOK NUT 2 2 AF 070-H9 GLAND HP 2 17 32 GN 531-L NYLOK NUT 2 AF 071-H6 COLLAR 4 BRLM 180 DUAL ROTARY GBOX ASSY - SPUR 1 3 33 GN 537-L NYLOK NUT 2 19 BRLM 266 HOSE ASSY 2 34 GN 550-L NYLOK NUT 4 20 BRLM 269-H9 MANIFOLD 1 35 GP 075-375 COLLET 4 21 BRLM 272 PLATE, TAIL END 1 36 GP 075-562 COLLET 4 22 BRLM 273 TAIL CHAIN 1 37 GP 076 COLLET NUT 4 23 GB 525-04 BOLT, HEX .25-20 X 1.00 2 38 GW 531-L LOCK WASHER 6 24 GB 525-10 BOLT, HEX .25-20 X 2.50 2 39 GW 537-F FLAT WASHER 2 25 GB 531-03 BOLT, HEX .31-18 X .75 2 40 ML 072-P2 GUIDE, LONG ADJ 2 26 GB 531-04 BOLT, HEX .31-18 X 1.00 4 41 ML 072-P4-L GUIDE, LONG ADJ 2 27 GB 531-06 BOLT, HEX .31-18 X 1.50 2 42 ML 072.1 SPRING NUT 2 28 GB 537-04 BOLT, HEX .37-16 X 1.00 2 43 UH-H9H6 ASSEMBLY 2 29 GB 537-08 BOLT, HEX .37-16 X 2.00 1 4 AF 071-H9 COLLAR 4 5 AF 072-H6 ANTIVIBE, GLAND ASSY 2 6 AF 072-H9 ANTIVIBE, GLAND ASSY 2 7 AF 073-H6 COUPLER 2 8 AF 073-H6H9 COUPLER 2 9 BR 052-2.5 AXLE-ZERK 4 10 BR 055 ROLLER ASSY 4 11 BRLM 018-D PLATE, DUAL COIL 1 12 BRLM 019 CHAIN HOOK 1 13 BRLM 022 CARRIAGE PLATE 1 14 48 PART NUMBER BRLM 027-JED PLATE TYPE 1 866-795-1586 • WWW.STONEAGETOOLS.COM PARTS DIAGRAM BRLM 343-CS TRIPLE ROTARY ASSEMBLY 15 KPSI # BRLM 210-CS TRI ROTARY GBOX ASSY COLLET SHAFTS 1 16 BRLM 224 MANIFOLD MP9 1 3 17 BRLM 225 HOSE, TAIL 20K SHORT 3 AF 065-MP12P8 ADAPTER 1 18 BRLM 270 CLAMP, HOSE 2 4 BR 052-2.5 AXLE-ZERK 4 19 BRLM 271 PLATE, HOSE CLAMP 1 5 BR 055 ROLLER ASSY 4 20 BRLM 272 PLATE, TAIL END 1 6 BRLM 018-D PLATE, DUAL COIL 1 21 BRLM 273 TAIL CHAIN 1 7 BRLM 019 CHAIN HOOK 1 22 BRLM 316 PEDESTAL, MANIFOLD 1 8 BRLM 022 CARRIAGE PLATE 1 23 BRLM 317 PEDESTAL, TAIL BRACKET 1 9 BRLM 027-SLT-L PLATE, TAIL BRACKET LONG 1 24 BRLM 318 SPRING PLUNGER 1 25 GB 525-04 BOLT, HEX .25-20 X 1.00 7 10 BRLM 036 BOLT, COIL ANCHOR 2 26 GB 525-12 BOLT, HEX .25-20 X 3.00 4 11 BRLM 041 MULTI CHANNEL 1 27 GB 531-03 BOLT, HEX .31-18 X .75 2 12 BRLM 060 MID SUPPORT BRACKET ASSY 1 28 GB 531-04 BOLT, HEX .31-18 X 1.00 4 29 GB 531-08 BOLT, HEX .31-18 X 2.00 4 30 GB 537-04 BOLT, HEX .37-16 X 1.00 2 31 GB 537-08 BOLT, HEX .37-16 X 2.00 2 1 PART NUMBER QTY. AF 061-MP9 ADAPTER .75 TYPE M TO MP9 3 2 AF 061-P8 ADAPTER .75 TYPE M TO P8 3 13 BRLM 181 WRENCH WELDMENT 1 14 32 GN 525-L NYLOK NUT 4 33 GN 531-L NYLOK NUT 4 34 GN 537-L NYLOK NUT 2 35 GN 550-L NYLOK NUT 4 36 GP 075-406 COLLET 9 37 GP 075-547 COLLET 9 38 GP 076 COLLET NUT 9 39 GS 525-09 SHCS .25-20 X 2.25 ZINC 4 40 GW 525-F FLAT WASHER 4 41 GW 531-L LOCK WASHER 6 42 GW 537-F FLAT WASHER 2 43 ML 072-P2 GUIDE, LONG ADJ 3 44 ML 072-P4-L GUIDE, LONG ADJ 3 45 ML 072.1 SPRING NUT 3 46 SA 056-P4P2 LANCE ADPT 3 47 SA 056-P4P4 LANCE ADPT 3 48 SL-P8P4-0 SWIVEL 3 866-795-1586 • WWW.STONEAGETOOLS.COM 49 PARTS DIAGRAM BRLM 353-CS TRIPLE ROTARY ASSEMBLY 22 KPSI # QTY. 16 BRLM 041 MULTI CHANNEL 1 34 GB 531-08 BOLT, HEX .31-18 X 2.00 4 1 AF 061-MP9 ADAPTER .75 TYPE M TO MP9 6 17 BRLM 060 MID SUPPORT BRACKET ASSY 1 35 GB 537-04 BOLT, HEX .37-16 X 1.00 2 18 BRLM 181 WRENCH WELDMENT 1 36 GB 537-08 BOLT, HEX .37-16 X 2.00 2 2 AF 063-MP12 ADAPTER 1.00 TYPE M TO MP12 1 19 BRLM 210-CS TRI ROTARY GBOX ASSY COLLET SHAFTS 1 37 GN 525-L NYLOK NUT 4 3 AF 071-MP6 COLLAR 3 38 GN 531-L NYLOK NUT 4 21 BRLM 224 MANIFOLD MP9 1 4 AF 071-MP9 COLLAR 3 39 GN 537-L NYLOK NUT 2 22 BRLM 225 HOSE, TAIL 20K SHORT 3 5 AF 072-MP6 ANTIVIBE,GLAND ASSY 3 40 GN 550-L NYLOK NUT 4 23 BRLM 270 CLAMP, HOSE 2 6 AF 072-MP9 ANTIVIBE, GLAND ASSY 3 41 GP 075-375 COLLET 6 24 BRLM 271 PLATE, HOSE CLAMP 1 7 AF 073-MP6MP9 COUPLING 3 42 GP 075-562 COLLET 6 25 BRLM 272 PLATE, TAIL END 1 8 AF 073-MP9 COUPLER 3 43 GP 076 COLLET NUT 6 26 BRLM 273 TAIL CHAIN 1 9 BR 052-2.5 AXLE-ZERK 4 44 GS 525-09 SHCS .25-20 X 2.25 ZINC 4 27 BRLM 316 PEDESTAL, MANIFOLD 1 10 BR 055 ROLLER ASSY 4 45 GW 525-F FLAT WASHER 4 28 BRLM 317 PEDESTAL, TAIL BRACKET 1 11 BRLM 018-D PLATE, DUAL COIL 1 46 GW 531-L LOCK WASHER 6 29 BRLM 318 SPRING PLUNGER 1 12 BRLM 019 CHAIN HOOK 1 47 GW 537-F FLAT WASHER 2 30 GB 525-04 BOLT, HEX .25-20 X 1.00 7 13 BRLM 022 CARRIAGE PLATE 1 48 ML 072-P2 GUIDE, LONG ADJ 3 31 GB 525-12 BOLT, HEX .25-20 X 3.00 4 14 BRLM 027-SLT-L PLATE, TAIL BRACKET LONG 1 49 ML 072-P4-L GUIDE, LONG ADJ 3 32 GB 531-03 BOLT, HEX .31-18 X .75 2 50 ML 072.1 SPRING NUT 3 33 GB 531-04 BOLT, HEX .31-18 X 1.00 4 51 SL-MP9AV9-0 SWIVEL 3 15 50 PART NUMBER BRLM 036 BOLT, COIL ANCHOR 2 866-795-1586 • WWW.STONEAGETOOLS.COM PARTS DIAGRAM BRLM 363-CS TRIPLE ROTARY ASSEMBLY 44 KPSI # QTY. 16 BRLM 041 MULTI CHANNEL 1 34 GB 531-08 BOLT, HEX .31-18 X 2.00 4 AF 060-H9 ADAPTER .56 TYPE M TO H9 6 17 BRLM 060 MID SUPPORT BRACKET ASSY 1 35 GB 537-04 BOLT, HEX .37-16 X 1.00 2 36 GB 537-08 BOLT, HEX .37-16 X 2.00 2 AF 062-H9 ADAPTER .88 TYPE M TO H9 1 18 BRLM 181 WRENCH WELDMENT 1 37 GN 525-L NYLOK NUT 4 19 1 3 AF 071-H6 COLLAR 3 BRLM 210-CS TRI ROTARY GBOX ASSY - COLLET SHAFTS 38 GN 531-L NYLOK NUT 4 4 AF 071-H9 COLLAR 3 21 BRLM 214 MANIFOLD H9 1 39 GN 537-L NYLOK NUT 2 5 AF 072-H6 ANTIVIBE, GLAND ASSY 3 22 BRLM 265 HOSE, TAIL 40K SHORT 3 40 GN 550-L NYLOK NUT 4 6 AF 072-H9 ANTIVIBE, GLAND ASSY 3 23 BRLM 270 CLAMP, HOSE 2 41 GP 075-375 COLLET 6 7 AF 073-H6H9 COUPLER 3 24 BRLM 271 PLATE, HOSE CLAMP 1 42 GP 075-562 COLLET 6 8 AF 073-H9 COUPLING 3 25 BRLM 272 PLATE, TAIL END 1 43 GP 076 COLLET NUT 6 9 BR 052-2.5 AXLE-ZERK 4 26 BRLM 273 TAIL CHAIN 1 44 GS 525-09 SHCS .25-20 X 2.25 ZINC 4 10 BR 055 ROLLER ASSY 4 27 BRLM 316 PEDESTAL, MANIFOLD 1 45 GW 525-F FLAT WASHER 4 11 BRLM 018-D PLATE, DUAL COIL 1 28 BRLM 317 PEDESTAL, TAIL BRACKET 1 46 GW 531-L LOCK WASHER 6 12 BRLM 019 CHAIN HOOK 1 29 BRLM 318 SPRING PLUNGER 1 47 GW 537-F FLAT WASHER 2 13 BRLM 022 CARRIAGE PLATE 1 30 GB 525-04 BOLT, HEX .25-20 X 1.00 7 48 ML 072-P2 GUIDE, LONG ADJ 3 14 BRLM 027-SLT-L PLATE, TAIL BRACKET LONG 1 31 GB 525-12 BOLT, HEX .25-20 X 3.00 4 49 ML 072-P4-L GUIDE, LONG ADJ 3 32 GB 531-03 BOLT, HEX .31-18 X .75 2 50 ML 072.1 SPRING NUT 3 BRLM 036 BOLT, COIL ANCHOR 2 33 GB 531-04 BOLT, HEX .31-18 X 1.00 4 51 UHS-H9H9 ASSY 3 1 2 15 PART NUMBER 866-795-1586 • WWW.STONEAGETOOLS.COM 51 PARTS DIAGRAM BRLM 430 FRONT IDLER ASSEMBLY BRLM 420 REAR IDLER ASSEMBLY # # 52 PART NUMBER PART NUMBER BR 026 IDLER BOLT 1 2 BR 030 IDLER PLATE 1 3 BRLM 032 FRONT BRACKET 1 4 BRLM 032-D PLATE, DUAL COIL FRONT 1 5 BRLM 036 BOLT, COIL ANCHOR 2 6 BRUD 117 BUSHING 2 7 GB 537-08 BOLT, HEX .37-16 X 2.00 2 8 GN 537-L NYLOK NUT 2 9 GN 550-H HEX NUT 2 10 GN 562-L NYLOK NUT 1 11 LM 025.1 IDLER SPROCKET 1 12 LM 025.2 SWING BOLT 1 13 UD 045-D SPACER 1 QTY. 1 BR 010 REAR IDLER WELDMENT 1 2 BR 011 LIFTING EYE & BOLT 1 3 BR 137 GUARD, IDLER 2 4 GB 525-02 BOLT, HEX .25-20 X .50 4 5 GB 562-12 BOLT, HEX .62-11 X 3.00 1 6 GN 562-L NYLOK NUT 1 7 GW 525-L LOCK WASHER 4 8 LM 025.1 IDLER SPROCKET 1 9 UD 045-D SPACER 2 QTY. 1 866-795-1586 • WWW.STONEAGETOOLS.COM PARTS DIAGRAM BRLM 500-XX RIGID LANCING MACHINE # PART QTY. 1 BRLM 005-15 DRIVE RAIL 1 2 BRLM 500.1-15 DRIVE PACKAGE 1 4 PL 160 PINCH POINT 1.5X3.0 DECAL 5 5 PL 167 CAUTION LABEL-MOVING-ROTATING 2 6 PL L STONEAGE STICKER, LARGE 2 BRLM 500.1-15 DRIVE PACKAGE # PART NUMBER QTY. 1 BR 008-BU-001 WEDGE BOLT 2 2 BR 060 RAIL CLAMP 2 3 BRLM 070, STOP, CARRIAGE 1 4 BRLM 420 REAR IDLER ASSY EXP 1 5 BRLM 430 FRONT IDLER ASSY 1 6 BRLM 510-EG FEED DRIVE ASSY (ELECTRA-GEAR) 1 8 BRLM 520-15D CHAIN FOR BRLM 500-15 1 9 GB 537-04 BOLT, HEX .37-16 X 1.00 4 866-795-1586 • WWW.STONEAGETOOLS.COM 53 PARTS DIAGRAM BRLM 510-EG FEED DRIVE ASSEMBLY (ELECTRA-GEAR) # 54 QTY. 14 GN 537-L NYLOK NUT 2 1 BR 060 RAIL CLAMP PART NUMBER 4 15 GN 550-L NYLOK NUT 2 2 BR 133 CHAIN GUARD 1 16 GP 010-BK BLACK PLASTIC ID WASHER P8 1 3 BR 170-E30 GEARBOX, ELECTRA-GEAR 30-1 1 17 GP 010-S SILVER PLASTIC ID WASHER P8 1 4 BRLM 023-EG DRIVE PED 2 18 GW 537-L LOCK WASHER 4 5 BRLM 051 MID DRIVE PLATE (BONFIG) 1 19 GW 550-F FLAT WASHER 2 6 BRLM 056 IDLER MOUNT 2 20 LM 016-6 AIR MOTOR 1 7 CST 022.1 KEY .187 SQ X 1.00 1 21 LM 022.1 IDLER SPROCKET 2 8 GB 531-04 BOLT, HEX .31-18 X 1.00 4 22 LM 518-EG SPROCKET 1 9 GB 537-04 BOLT, HEX .37-16 X 1.00 4 23 ML 017-8.4 FTG, NIPPLE CLOSE P8M P8M 1 10 GB 537-05 BOLT, HEX .37-16 X 1.25 10 24 ML 017-8.8 FTG, ELBOW 45 P8M J8M 2 11 GB 537-07 BOLT, HEX .37-16 X 1.75 2 25 ML 017-8.7 FTG, NIPPLE P8M 4.50 1 12 GB 537-08 BOLT, HEX .37-16 X 2.00 4 26 ML 019 QUICK EXHAUST P8 WITH MUFFLER 2 13 GB 550-18 BOLT, HEX .50-13 X 4.50 2 27 BR 167 DUST CAP J8 2 866-795-1586 • WWW.STONEAGETOOLS.COM PARTS DIAGRAM BRLM 580-XX RAIL EXTENSION KIT # PART NUMBER BRLM 580-05/QTY. BRLM 580-08/QTY. BRLM 580-10/QTY. BRLM 580-15/QTY. 1 BR 004-05 BOX RAIL EXTENSION 1 - - - 2 BR 004-08 BOX RAIL EXTENSION - 1 - - 3 BR 004-10 BOX RAIL EXTENSION - - 1 - 4 BR 004-15 BOX RAIL EXTENSION - - - 1 5 BR 006-N-001 SPLICE TUBE 1 1 1 1 6 BR 008-BU-001 WEDGE BOLT 2 2 2 2 7 BRLM 520 CHAIN 1 1 1 1 8 BRLM 521 MASTER LINK 1 1 1 1 BRLM 580-XX BRLM 580-05 BRLM 580-08 BRLM 580-10 BRLM 580-15 BRLM 520-OAL 119.5” 191.5” 239.5” 359.5” PARTS DIAGRAM BRLM 636-XXX-XXX GUIDE BLOCK KITS Attach blocks every 8th coil. 5 FT EXTENSION (2 BLOCKS, 1 TAIL) 10 FT EXTENSION (3 BLOCKS, 1 TAIL) 15 FT EXTENSION (4 BLOCKS, 1 TAIL) 15 FT DRIVE (4 BLOCKS, 2 TAILS) 20 FT EXTENSION (6 BLOCKS, 1 TAIL) 25 FT DRIVE (7 BLOCKS, 2 TAILS) BRLM 636-XXX-XXX XX=LENGTH X=DRIVE OR EXTENSION X=NUMBER OF LANCES XX=DIAMETER OF LANCE HOLE 5= 5FT D=DRIVE S=SINGLE 10 = 5/8” 10= 10FT NO “D”= EXTENSION D=DOUBLE 15 = 15/16” T=TRIPLE 18 = 1 1/8” 15= 15FT 20= 20FT 25= 25FT EXAMPLE: BRLM 636-25D-T10 = 25FT DRIVE FOR TRIPLE LANCE WITH 5/8” HOLES BRLM 636-K DUAL COIL HARDWARE KIT # 56 PART NUMBER QTY. 1 BRLM 239 ASSEMBLY, CARRIAGE DUAL COIL PLATE 1 2 BRLM 240 ASSEMBLY, FRONT DUAL COIL ANCHOR 1 866-795-1586 • WWW.STONEAGETOOLS.COM PARTS DIAGRAM LANCE POSITIONER (CB-LP) CONTROL BOX # PART NUMBER QTY. 1 CB 107 LEG WELDMENT 4 2 CB-LP.1 CONTROL BOX PANEL ASSY 1 3 CB 158 HOSE ASSY, 25 FT J8 7 866-795-1586 • WWW.STONEAGETOOLS.COM 57 PARTS DIAGRAM LANCE POSITIONER (CB-LP.1) CONTROL BOX SUB ASSEMBLY, DUAL REGULATOR, FOUR FUNCTION # 1 58 PART NUMBER BR 154 MUFFLER P6 QTY. 18 CB 114 INLET FITTING 1 35 GB 531-11 BOLT, HEX .31-18 X 2.75 2 3 19 CB 115 COUPLING 1 36 GN 525-L NYLOK NUT 10 CB 116 NIPPLE 1 37 GN 531-L NYLOK NUT 6 CB 120 FTG, ELBOW STREET 90 P6M P6F 3 38 GP 009-B BLUE PLASTIC ID WASHER P6 1 39 1 22 CB 122 FTG, ADAPTER P6M J8M 6 GP 009-BK BLACK PLASTIC ID WASHER P6 23 CB 124 BALL VALVE ASSY 1 40 GP 009-G GREEN PLASTIC ID WASHER P6 1 24 CB 126 FITTING, ELBOW OUTLET 9 41 1 25 CB 132 REGULATOR 2 GP 009-P PURPLE PLASTIC ID WASHER P6 26 CB 142 VALVE, SELECTOR 1 42 GP 009-R RED PLASTIC ID WASHER P6 1 27 CB 142-C VALVE, SELECTOR 1 43 GP 009-S SILVER PLASTIC ID WASHER P6 1 44 GP 009-Y YELLOW PLASTIC ID WASHER P6 1 45 GP 025-P6SS HEX SOCKET PLUG 1 46 GS 525-025 SHCS .25-20 X .62 ZINC 4 47 GS 525-05 SHCS .25-20 X 1.25 BLK (CB 021) 2 48 GW 525-F FLAT WASHER 8 49 GW 531-F FLAT WASHER 4 2 BR 167 DUST CAP J8 7 20 3 CB 004-D MOUNTING PLATE 1 21 4 CB 006 MOUNT BLOCK 4 5 CB 010 ROTATION CONTROL PANEL 1 6 CB 012-D PLATE DUAL REGULATOR 1 7 CB 012.2 NUT, NYLOK 10-24 (GN 519-L) 8 8 CB 020 FILTER 1 9 CB 022 OILER 1 10 CB 023 PLATE, DIRECTION 1 11 CB 024 PLATE END 1 12 CB 026 FTG, NIPPLE HEX P6M P6M 2 13 CB 050 PLATE, XYZ 1 14 CB 052-14 HOSE ASSY 4 15 CB 054 FTG, TEE P6M P6F P6F 1 16 CB 058 FTG, CROSS P6F 1 17 CB 100 FRAME SUB ASSY 1 28 CB 142-C-001 VALVE, SELECTOR 1 29 CB 147 FTG, ELBOW 90 P6M P4F 1 30 CB 148 GAUGE 1 31 CB 508 FSHCS .25-20 X 1.75 SS 8 32 CB 512.1 HHMS .19-24 X .75 SS 8 33 CB 555 FSHCS .19-24 X .50 SS (GSF 319-02) 14 GB 531-07 BOLT, HEX .31-18 X 1.75 4 34 866-795-1586 • WWW.STONEAGETOOLS.COM PARTS DIAGRAM AUTOBOX® (CB-TBX-LPA) LPA TUMBLEBOX ASSEMBLY # PART NUMBER QTY. 11 CB 829 MANIFOLD ASSY, LPA 1 1 CAM 153 HEAT SHRINK (CUT IN HALF) 1 12 CB 830 FRAME, TUMBLEBOX LPA 1 2 CB 052-14 HOSE, INLET FOR LPA 1 13 CB 831 COVER, TUMBLEBOX LPA 1 3 CB 052-18 HOSE, OUTLET FOR LPA 1 14 GB 337-03 BOLT, HEX .37-16 X .75 SS 2 4 CB 314 3-LOBE KNOB 1 15 GN 319-L NYLOK NUT SS (HC 025.1) 10 5 CB 325 HANDLE TOP 1 16 GP 012-BK BLACK ID BAND LG 2 6 CB 328-001 POLE MOUNT 1 17 GP 012-RD RED ID BAND LG 2 7 CB 712 HEX STANDOFF 4 18 1 8 CB 745-25 SUPPLY HOSE BUNDLE 2 GPTB 0250-PUR95A-BK (PILOT LEFT) FOR LPA 19 GPTB 0250-PUR95A-BK (PILOT UP) FOR LPA 1 20 GPTB 0250-PUR95A-RD (PILOT DOWN) FOR LPA 1 9 CB 825 SPOOL VALVE ASSY, LPA 2 10 CB 828 FTG, ADAPTER SWIVEL P2F J4F 4 21 GPTB 0250-PUR95A-RD (PILOT RIGHT) FOR LPA 1 22 GPTB 0500-PUR95A-BK TUBE, .50 FOR LPA 2 23 GSB 319-08 BHCS 10-24 X 2.00 SS 10 24 GTB 319-02-32 BHTS .19-32 X .50 TORX SS 8 25 GTB 331-025 BHTS .31-18 X .62 TORX SS 2 26 HRS 563 FTG, ELBOW SWIVEL 90 P2M PL4 4 866-795-1586 • WWW.STONEAGETOOLS.COM 59 PARTS DIAGRAM LANCE POSITIONER (LP-300-XX) LANCE POSITIONER ASSEMBLY # 60 PART NUMBER QTY. 1 BR 008-BU-001 WEDGE BOLT 8 38 LP 076 RAIL SLOTTED VERTICAL 2 40 LP 078-78 CROSS TIE 2 41 LP 094-L CORNER ASSY 2 42 LP 094-U CORNER ASSY 2 44 LP 210 FRONT BRACE ASSY 1 866-795-1586 • WWW.STONEAGETOOLS.COM PARTS DIAGRAM LANCE POSITIONER (LP-300-XX) LANCE POSITIONER ASSEMBLY CONTINUED... # QTY. 17 GP 010-G GREEN PLASTIC ID WASHER P8 1 2 BR 167 DUST CAP J8 PART NUMBER 4 18 GP 010-R RED PLASTIC ID WASHER P8 1 33 LP 036 BEARING, FLANGE MOUNT (MFR VARIATIONS) 1 3 BRUD 072 BEAM INSERT 4 19 GP 010-Y YELLOW PLASTIC ID WASHER P8 1 34 LP 050-SS GEARBOX MOUNT HORIZONTAL 1 4 BRUD 073 BEAM PIN 4 20 GW 525-L LOCK WASHER 8 35 LP 055-SS GEARBOX MOUNT VERTICAL 1 LP 071 ASSY, 2 SIDE PLATES & ROLLERS 1 5 BRUD 172 RETAINING RING, EXTERNAL 8 21 GW 537-L LOCK WASHER 28 36 6 CST 022.1 KEY .187 SQ X 1.00 7 22 LM 016-4 AIR MOTOR 2 37 LP 074-78 RAIL SLOTTED HORIZONTAL 1 LP 077-78 CROSS BEAM 1 7 GB 525-02 BOLT, HEX .25-20 X .50 4 23 LP 011-PC 2104 400-1 RALR 1 39 8 GB 525-03 BOLT, HEX .25-20 X .75 4 24 LP 012-PC 1304 400-1 ULR 1 43 LP 170 GEAR WELDMENT 2 1 45 LP 225 TORQUE LIMITER 1 LP 270 GEAR, SPUR 1 9 GB 525-05 BOLT, HEX .25-20 X 1.25 4 25 LP 013 SPACER, VERTICAL GEARBOX 10 GB 537-04 BOLT, HEX .37-16 X 1.00 28 26 LP 028 GUARD, GEAR HZ RH 1 46 11 GB 537-05 BOLT, HEX .37-16 X 1.25 4 27 LP 029 GUARD, GEAR HZ LH 1 47 LP 700 CARRIAGE CLAMP ASSY 1 ML 017-8.8 FTG, ELBOW 45 P8M J8M 4 12 GB 537-06 BOLT, HEX .37-16 X 1.50 4 28 LP 030 GUARD, GEAR RH 1 48 13 GB 537-025 BOLT, HEX .37-16 X .62 2 29 LP 031 GUARD, GEAR LH 1 49 PL 160 PINCH POINT 1.5X3.0 DECAL 8 50 PL 167 CAUTION LABEL-MOVINGROTATING 1 14 GN 525-L NYLOK NUT 4 30 LP 032-78 SHAFT, DRIVE 1 15 GN 537-L NYLOK NUT 8 31 LP 033 SHAFT, STUB 1 16 GP 010-B BLUE PLASTIC ID WASHER P8 1 32 LP 034-001 COUPLING 2 866-795-1586 • WWW.STONEAGETOOLS.COM 61 PARTS DIAGRAM LANCE POSITIONER (LP 320) REAR SUPPORT ASSEMBLY # 62 PART NUMBER QTY. 1 BR 008-BU-001 WEDGE BOLT 2 2 BJ 086.4-L LINK 2 3 LP 095-001 CORNER POST 2 4 LP 310 TROLLEY ASSY 1 5 LP 313 LEG, PIPE 4 6 LP 319 TOP BEAM 1 7 LP 314 PLATE, END FITTING 2 8 LP 315 PLATE, END FITTING COVER 2 9 UD 071-D CHAIN HOIST (EXT) 1 10 GB 537-14 BOLT, HEX .37-16 X 3.50 8 11 GB 537-13 BOLT, HEX .37-16 X 3.25 4 12 GB 537-17 BOLT, HEX .37-16 X 4.25 8 13 GN 537-L NYLOK NUT 20 866-795-1586 • WWW.STONEAGETOOLS.COM PARTS DIAGRAM LANCE POSITIONER (LP 330-XX) LANCE POSITIONER LEG OPTIONS # LP 335-WC QTY. LP 335-E QTY. LP 335-WE QTY. LP 335-JE QTY. LP 335-WJE QTY. 1 BR 008-BU-001 WEDGE BOLT PART NUMBER - 4 4 4 4 2 GB 543-14 BOLT, HEX .43-14 X 3.50 - - 4 - - 3 GB 543-16 BOLT, HEX .43-14 X 4.00 - - 4 4 4 4 GN 543-L NYLOK NUT - - 8 4 4 5 LP 075 WHEEL INSERT - - 4 4 4 6 LP 079-17.5 WHEEL RAIL - 4 4 4 4 7 LP 085 WASHER, CASTER - - - 4 4 8 LP 086 COLLAR ASSY - - 4 4 4 9 LP 088 JACK ASSY - - - 4 4 10 LP 089 WHEEL 4 - 4 - 4 11 LP 093 WHEEL MOUNT ASSY 4 - - - 4 866-795-1586 • WWW.STONEAGETOOLS.COM 63 PARTS DIAGRAM LANCE POSITIONER (LP 700) CARRIAGE CLAMP ASSEMBLY # 64 PART NUMBER QTY. 1 LP 701 FIXED RAIL ASSY 1 2 LP 705 CLAMPING RAIL ASSY 1 3 LP 707 END CLAMP 2 4 LP 706 SLIDER 2 5 GS 325-04 SHCS .25-20 X 1.00 SS (BC 053) 16 6 LP 652-1.38 AXLE-ZERK 4 7 BR 055 ROLLER ASSY 8 8 BR 052-2.0 AXLE-ZERK 4 9 GN 550-L NYLOK NUT 4 10 LP 622 COMPRESSION SPACER 4 11 LP 708 .375-16 SS HANDLE 2 866-795-1586 • WWW.STONEAGETOOLS.COM PARTS DIAGRAM LANCE POSITIONER (LP 071) 2 SIDE PLATES AND ROLLER ASSEMBLY # PART NUMBER QTY. 1 BR 051-2.0-0 AXLE-ZERK 1 2 BR 052-2.0 AXLE-ZERK 7 3 BR 055 ROLLER ASSY 8 4 GN 550-L NYLOK NUT 8 5 GSB 313-0075 BHCS 6-32 X .19 SS 4 6 LP 070 SIDE PLATE 1 7 LP 070-001 SIDE PLATE 1 8 LP 072 LABEL, ORIENTATION 1 9 LP 073 CE SERIAL PLATE 1 866-795-1586 • WWW.STONEAGETOOLS.COM 65 TERMS AND CONDITIONS 1. Acceptance of Terms and Conditions. Receipt of these Terms and Conditions of Sale (“Terms and Conditions”) shall operate as the acceptance by StoneAge, Inc. (“Seller”) of the order submitted by the purchaser (“Buyer”). Such acceptance is made expressly conditional on assent by Buyer to these Terms and Conditions. Such assent shall be deemed to have been given unless written notice of objection to any of these Terms and Conditions (including inconsistencies between Buyer’s purchase order and this acceptance) is given by Buyer to Seller promptly on receipt hereof. Seller desires to provide Buyer with prompt and efficient service. However, to individually negotiate the terms of each sales contract would substantially impair Seller’s ability to provide such service. Accordingly, the product(s) furnished by Seller are sold only according to the terms and conditions stated herein and with the terms and conditions stated in any effective StoneAge Dealer Agreement or StoneAge Reseller Agreement, if applicable. Notwithstanding any terms and conditions on Buyer’s order, Seller’s performance of any contract is expressly made conditional on Buyer’s agreement to these Terms and Conditions unless otherwise specifically agreed to in writing by Seller. In the absence of such agreement, commencement of performance, shipment and/or delivery shall be for Buyer’s convenience only and shall not be deemed or construed to be an acceptance of Buyer’s terms and conditions. 2. Payment/Prices. Unless other arrangements have been made in writing between Seller and Buyer, payment for the product(s) shall be made upon receipt of invoice. The prices shown on the face hereof are those currently in effect. Prices invoiced shall be per pricelist in effect at the time of shipment. Prices are subject to increase for inclusion of any and all taxes which are applicable and which arise from the sale, delivery or use of the product(s), and the collection of which Seller is or may be responsible to provide to any governmental authority, unless acceptable exemption certificates are provided by Buyer in accordance with applicable law. Buyer shall pay all charges for transportation and delivery and all excise, order, occupation, use or similar taxes, duties, levies, charges or surcharges applicable to the product(s) being purchased, whether now in effect or hereafter imposed by any governmental authority, foreign or domestic. 3. Warranty. SELLER MAKES NO WARRANTIES OR REPRESENTATIONS AS TO THE PERFORMANCE OF ANY PRODUCT EXCEPT AS SET FORTH IN THE STONEAGE LIMITED WARRANTY PROVIDED WITH THE PRODUCT. 4. Delivery. Seller is not obligated to make delivery by a specified date, but will always use its best efforts to make delivery within the time requested. The proposed shipment date is an estimate. Seller will notify Buyer promptly of any material delay and will specify the revised delivery date as soon as practicable. UNDER NO CIRCUMSTANCES SHALL SELLER HAVE ANY LIABILITY WHATSOEVER FOR LOSS OF USE OR FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM DELAY REGARDLESS OF THE REASON(S). All product(s) will be shipped F.O.B. point of origin, unless specifically agreed otherwise, and Buyer shall pay all shipping costs and insurance costs from that point. Seller, in its sole discretion, will determine and arrange the means and manner of transportation of the product(s). Buyer shall bear all risk of loss commencing with the shipment or distribution of the product(s) from Seller’s warehouse. Order shortages or errors must be reported within fifteen (15) business days from receipt of shipment to secure adjustment. No product(s) may be returned without securing written approval from Seller. 5. Modification. These Terms and Conditions are intended by Seller and Buyer to constitute a final, complete and exclusive expression of agreement relating to the subject matter hereof and cannot be supplemented or amended without Seller’s prior written approval. 66 6. Omission. Seller’s waiver of any breach or Seller’s failure to enforce any of these Terms and Conditions at any time, shall not in any way affect, limit or waive Seller’s right thereafter to enforce and compel strict compliance with every term and condition hereof. 7. Severability. If any provision of these Terms and Conditions is held to be invalid or unenforceable, such invalidity or unenforceability shall not affect the validity or enforceability of the other portions hereof. 8. Disputes. Seller and Buyer shall attempt in good faith to promptly resolve any dispute arising under these Terms and Conditions by negotiations between representatives who have authority to settle the controversy. If unsuccessful, Seller and Buyer shall further attempt in good faith to settle the dispute by nonbinding third-party mediation, with fees and expenses of such mediation apportioned equally to each side. Any dispute not so resolved by negotiation or mediation may then be submitted to a court of competent jurisdiction in accordance with the terms hereof. These procedures are the exclusive procedures for the resolution of all such disputes between the Seller and Buyer. 9. Governing Law. All sales, agreements for sale, offers to sell, proposals, acknowledgments and contracts of sale, including, but not limited to, purchase orders accepted by Seller, shall be considered a contract under the laws of the State of Colorado and the rights and duties of all persons, and the construction and effect of all provisions hereof shall be governed by and construed according to the laws of such state. 10. Jurisdiction and Venue. Seller and Buyer agree that the state or federal courts located within the City and County of Denver, Colorado shall have sole and exclusive jurisdiction over any litigation concerning any dispute arising under these Terms and Conditions not otherwise resolved pursuant to Section 9 as well as any alleged defects of any Products or damages sustained as a result of such alleged defects. Seller and Buyer further agree that should any litigation be commenced in connection with such a dispute, it shall only be commenced in such courts. Seller and Buyer agree to the exclusive jurisdiction of such courts and neither will raise any objection to the jurisdiction and venue of such courts, including as a result of inconvenience. 11. Attorney’s Fees. If any litigation is commenced between Seller and Buyer, or their personal representatives, concerning any provision hereof, the party prevailing in the litigation shall be entitled, in addition to such other relief that is granted, to a reasonable sum as and for their attorneys’ fees and costs in such litigation or mediation. STONEAGE TRADEMARK LIST View the list of StoneAge’s trademarks and service marks and learn how the trademarks should be used. Use of StoneAge trademarks may be prohibited, unless expressly authorized. http://www.StoneAgetools.com/trademark-list/ STONEAGE PATENT DATA View the list of StoneAge’s current U.S. patent numbers and descriptions. http://www.sapatents.com STONEAGE TERMS AND WARRANTY View StoneAge’s Terms and Warranty Conditions online. http://www.stoneagetools.com/terms http://www.stoneagetools.com/warranty 866-795-1586 • WWW.STONEAGETOOLS.COM TERMS AND CONDITIONS Warranties set forth herein extend only to End-Users, meaning customers acquiring, or that have previously acquired, a product manufactured by StoneAge (“Product”) for their own use and not for resale, either directly from StoneAge Inc. (“StoneAge”) or from a StoneAge Authorized Dealer or Reseller (“Dealer”). No warranty of any kind or nature is made by StoneAge beyond those expressly stated herein. 1. LIMITED WARRANTY PERIOD. Subject to the limitations and conditions hereinafter set forth, StoneAge warrants its Product to be free from defects in workmanship and material for a period of one (1) year from the date of purchase by the End-User, provided that the end of the limited warranty period shall not be later than eighteen (18) months from the date of shipment of the Product to the Dealer or the End-User by StoneAge (“Limited Warranty Period”). All replacement parts which are furnished under this Limited Warranty and properly installed shall be warranted to the same extent as the original Product under this Limited Warranty if, and only if, the original parts were found to be defective within the original Limited Warranty Period covering the original Product. Replacement parts are warranted for the remainder of the original Limited Warranty Period. This Limited Warranty does not cover any component part of any Product not manufactured by StoneAge. Any such component part is subject exclusively to the component manufacturer’s warranty terms and conditions. 2. LIMITED WARRANTY COVERAGE. StoneAge’s sole obligation under this Limited Warranty shall be, at StoneAge’s option and upon StoneAge’s inspection, to repair, replace or issue a credit for any Product which is determined by StoneAge to be defective in material or workmanship. StoneAge reserves the right to examine the alleged defective Product to determine whether this Limited Warranty is applicable, and final determination of limited warranty coverage lies solely with StoneAge. No statement or recommendation made by a StoneAge representative, Dealer or agent to EndUser shall constitute a warranty by StoneAge or a waiver or modification to any of the provisions hereof or create any liability for StoneAge. 3. WARRANTY SERVICE PROVIDERS. Service and repair of the Product is to be performed only by StoneAge authorized service representatives, including Dealers who are authorized repair centers, with StoneAge approved parts. Information about StoneAge authorized service representatives can be obtained through the StoneAge website at www.stoneagetools.com/ service. Unauthorized service, repair or modification of the Product or use of parts not approved by StoneAge will void this Limited Warranty. StoneAge reserves the right to change or improve the material and design of the Product at any time without notice to End-User, and StoneAge is not obligated to make the same improvements during warranty service to any Product previously manufactured. 4. WARRANTY EXCLUSIONS. This Limited Warranty does not cover, and StoneAge shall not be responsible for the following, or damage caused by the following: (1) any Product that has been altered or modified in any way not approved by StoneAge in advance in writing; (2) any Product that has been operated under more severe conditions or beyond the rated capacity specified for that Product; (3) depreciation or damage caused by normal wear and tear, failure to follow operation or installation instructions, misuse, negligence or lack of proper protection during storage; (4) exposure to fire, moisture, water intrusion, electrical stress, insects, explosions, extraordinary weather and/or environmental conditions including, but not limited to lightning, natural disasters, storms, windstorms, hail, earthquakes, acts of God or any other force majeure event; (5) damage to any Product caused by any attempt to repair, replace, or service the Product by persons other than StoneAge authorized service representatives; (6) costs of normal maintenance parts and services; (7) damage sustained during unloading, shipment or transit of the Product; or (8) failure to perform the recommended periodic maintenance procedures listed in the Operator’s Manual accompanying the Product. 5. REQUIRED WARRANTY PROCEDURES. To be eligible for warranty service, the End-User must: (1) report the Product defect to the entity where the Product was purchased (i.e. StoneAge or the Dealer) within the Limited Warranty Period specified in this Limited Warranty; (2) submit the original invoice to establish ownership and date of purchase; and (3) make the Product available to a StoneAge authorized service representative for inspection to determine eligibility for coverage under this Limited Warranty. This Limited Warranty shall not extend to any person or entity who fails to provide proof of original purchase from StoneAge or a Dealer. No Product may be returned for credit or adjustment without prior written permission from StoneAge. 6. DISCLAIMER OF IMPLIED WARRANTIES AND OTHER REMEDIES. EXCEPT AS EXPRESSLY STATED HEREIN (AND TO THE FULLEST EXTENT ALLOWED UNDER APPLICABLE LAW), STONEAGE HEREBY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND ANY AND ALL WARRANTIES, REPRESENTATIONS OR PROMISES AS TO THE QUALITY, PERFORMANCE OR FREEDOM FROM DEFECT OF THE PRODUCT COVERED BY THIS LIMITED WARRANTY. STONEAGE FURTHER DISCLAIMS ALL IMPLIED INDEMNITIES. 7. LIMITATION OF LIABILITY. End-User specifically acknowledges that the Product may be operated at high speeds and/or pressures, and that as such it may be inherently dangerous if not used correctly. End-User shall familiarize itself with all operation materials provided by StoneAge and shall at all times use and require its agents, employees and contractors to use all necessary and appropriate safety devices, guards and proper safe operating procedures. In no event shall StoneAge be responsible for any injuries to persons or property caused directly or indirectly by the operation of the Product if EndUser or any agent, employee, or contractor of End-User: (1) fails to use all necessary and appropriate safety devices, guards and proper safe operating procedures; (2) fails to maintain in good working order such safety devices and guards; (3) alters or modifies the Product in any way not approved by StoneAge in advance in writing; (4) allows the Product to be operated under more severe conditions or beyond the rated capacity specified for the Product; or (5) otherwise negligently operates the Product. End-User shall indemnify and hold StoneAge harmless from any and all liability or obligation incurred by or against StoneAge, including costs and attorneys’ fees, to or by any person so injured. TO THE FULL EXTENT ALLOWED BY APPLICABLE LAW, STONEAGE SHALL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES (INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF GOODWILL, DIMINUTION OF VALUE, WORK STOPPAGE, INTERRUPTION OF BUSINESS, RENTAL OF SUBSTITUTE PRODUCT, OR OTHER COMMERCIAL LOSS EVEN TO THE EXTENT SUCH DAMAGES WOULD CONSTITUTE DIRECT DAMAGES), WITH RESPECT TO THE COVERED STONEAGE PRODUCT, OR OTHERWISE IN CONNECTION WITH THIS LIMITED WARRANTY, REGARDLESS OF WHETHER STONEAGE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IT IS UNDERSTOOD THAT STONEAGE’S LIABILITY, WHETHER IN CONTRACT, IN TORT, UNDER ANY WARRANTY, IN NEGLIGENCE, OR OTHERWISE SHALL NOT EXCEED THE AMOUNT OF THE PURCHASE PRICE PAID BY THE END-USER FOR THE PRODUCT. STONEAGE’S MAXIMUM LIABILITY SHALL NOT EXCEED, AND END-USER’S REMEDY IS LIMITED TO EITHER (1) REPAIR OR REPLACEMENT OF THE DEFECTIVE WORKMANSHIP OR MATERIAL OR, AT STONEAGE’S OPTION, (2) REFUND OF THE PURCHASE PRICE, OR (3) ISSUANCE OF A CREDIT FOR THE PURCHASE PRICE, AND SUCH REMEDIES SHALL BE END-USER’S ENTIRE AND EXCLUSIVE REMEDY. YOU, THE END-USER, UNDERSTAND AND EXPRESSLY AGREE THAT THE FOREGOING LIMITATIONS ON LIABILITY ARE PART OF THE CONSIDERATION IN THE PRICE OF THE STONEAGE PRODUCT YOU PURCHASED. Some jurisdictions do not allow the limitation or exclusion of liability for certain damages, so the above limitations and exclusions may not apply to you. This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from jurisdiction to jurisdiction. If any provisions of this Limited Warranty is held to be invalid or unenforceable, such invalidity or unenforceability shall not affect the validity or enforceability of the other portions hereof. 866-795-1586 • WWW.STONEAGETOOLS.COM 67 1-866-795-1586 • www.STONEAGETOOLS.com © 2015 StoneAge, Inc. All Rights Reserved
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c145 79.163499, 2018/08/13-16:40:22 Create Date : 2019:03:04 09:03:59-07:00 Metadata Date : 2019:03:04 09:04:59-07:00 Modify Date : 2019:03:04 09:04:59-07:00 Creator Tool : Adobe InDesign CC 14.0 (Windows) Instance ID : uuid:2ecdf4f5-cbda-4577-9894-f77443169afb Original Document ID : xmp.did:9d322ba9-59f6-4fd3-b672-f1a11ffe25b4 Document ID : xmp.id:e0d886dc-6f1c-d04a-b9de-3c688d5f83c6 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:a0edf276-f054-0f43-9f82-e5a43e9a3c3c Derived From Document ID : xmp.did:4c4f725e-6180-3642-98f0-e337ead9096f Derived From Original Document ID: xmp.did:9d322ba9-59f6-4fd3-b672-f1a11ffe25b4 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 14.0 (Windows) History Changed : / History When : 2019:03:04 09:03:59-07:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 68 Creator : Adobe InDesign CC 14.0 (Windows)EXIF Metadata provided by EXIF.tools