MCIR001 Manual
MCIR001%20Manual
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
MCIR001 User Manual OEM Version 1.0 2011-12-2 MCIR001 Manual 1.Product Information MCIR001 is portable data collector. It's a portable magnetic swipe reader, which is specially designed for magnetic stripe data collection anytime and anywhere without computer. Large memory can collect 32000 data. Built-in Time clock indicates every transaction date and time. Data is read from the card and kept into the memory then downloaded to the computer. Features: Ultra low power consumption - Less than 10uA when idle and less than 80uA when a card is being swiped Reads interrupted swipes in both directions Reads all magnetic cards Low voltage operation Swipe Direction – bidirectional Data downloadable to the computer via USB cable Time stamp shows date and time with every transaction Hardware imbedded password protection 3-track version can collect all three tracks data Fully encrypted Stores 32000 card scans All swipes are time stamped Data retained even if power is removed No programming required, easy to use as 1- 2 -3 Applications: Any movable data collection (Trade shows, Racing events) Point of sales Law enforcement (DMV card) Attendance (Student ID, Membership card) Conference Attendance Classroom Attendance Meeting Attendance Door Locking Systems ISO Standard Track1 210bpi, 79 Alphanumeric Characters Track2 75bpi, 40 Numeric characters Track3 210bpi, 107 Numeric characters MCIR001 Manual 2.Parts identification MCIR001 overview MCIR001 Pin configuration The portable magnetic stripe reader, plastic rail is ideal to test your MCIR001. It includes a 3 track low profile head which can be used to read up to 1,000,000 cards. MCIR001 Manual USB Data Cable: connect the MCIR001 to your computer. Warning: Although this cable looks like a standard mobile phone cable, it is not; it contains a USB to Serial Port convertor and a custom pin layout therefore it cannot be replaced by any other cable made by other manufacturers. Using other cables with your MCIR001 will damage it and void its warranty. USB Charger Cable: charging the battery. Charge: 1) Connect the charger to the PC or other equipment with 5V DC power through USB port. There’s a red LED flickering. 2) Connect MCIR001 to the charger through mini USB. The red LED will be light. 3) Waiting for the red LED turning off, it means the battery is full. Warning: Don’t mistake the USB charge to USB cable. 3.Software installation and usage 3.1 Install driver guide The software for MCIR001 has been designed and tested on Windows XP and Windows 7 and so on (all Windows system, 32 and 64bit). We do not guarantee or support its usage on any other operating system. MCIR001 Manual a) Insert the CD into your CD-Rom b) Run file F:\USB driver \PL2303_Prolific_DriverInstaller_v1417.exe ( “F” is your DVD-ROM drive), If the instructions above are insufficient, please refer to the following documents for a very detailed installation of the drivers. F:\USB driver \ releasenote.txt 3.2 Using the software The software which is used to download ,command and view the data form the MCIR001 is called MCIR001.exe. 1) Connect to MCIR001 Connect MCIR001 to PC with the USB cable. 2) Start MCIR001 On CD-ROM there is a file called MCIR001, copy MCIR001.exe to computer first, double click on its icon in order to start it, please observe the picture upper, highlighted with the file need to double click on. The window as follow: MCIR001 Manual MCIR001 has connected to the MCIR001.exe and will ask for a password. The default one is “Magencoders", you can change it later. For the moment, type in the password and press “OK”. 3.3 Software Description Erase Memory It will clear all the record in MCIR001, that is , remove all records from memory, use this operate, you must confirm the original valid data has been correctly downloaded, otherwise all the records will be lost. Set time Update system time with the collector within the date, time, setting, you must verify the system date/time is correct. MCIR001 Manual Get time Check the collector’s clock. Total Swipe Check the number of records, which includes not completely correct and completely correct. Download Swipes Download data to the current document file. Data records, there may be some missing data in a Record: ① the Record no data was replaced with “Blank”;② data of the record, but to read out with error, will be filled “Error”, the user can be edit, make a choice. Reset Data collection generate a host-start, something which can be used to test the connection is correct, the work of the collector is normal. Clear Clear the display content. Chang PIN Change the password for your device. Warning: if you forget the new password you will not be able to access the device anymore and we cannot be able to help you. Save to file Save the data to computer, you can select a folder, or it will save the data to the software directory directly. Note: please type the key to the blank box. Read from file Read the data has been saved. Exit Close MCIR001.exe Beep off Whether the buzzer beep Write Card Sent the data directly to the M80 magnetic card reader writers 4.Connections The MCIR001 is static sensitive therefore you need to handle it in a static free environment. This means that you need to wear at least an antistatic bracelet when you touch the electronics. If you do not wear static protection gear you risk damaging your reader! MCIR001 Manual 5. Examples for Application
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 8 Author : Create Date : 2012:01:14 15:04:00+08:00 Creator : Producer : Foxit PDF Creator Version 3.0.1.0109 Subject : Title :EXIF Metadata provided by EXIF.tools