Mechanical Products Catalog
User Manual: Mechanical Products Catalog
Open the PDF directly: View PDF 
.
Page Count: 244
| Download | |
| Open PDF In Browser | View PDF |
GRINNELL MECHANICAL PRODUCTS
General Catalog
TABLE OF CONTENTS
TABLE OF CONTENTS
General Data Section . . . . . . . . . . . . .8 – 14
Why Grooved? . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Why GRINNELL? . . . . . . . . . . . . . . . . . . . . . . . . . 9
Product Features and Benefits . . . . . . . . . . . . . . . 10
Agency Listings and Approvals, General Code
Groups, Associations, Laboratories, Government
Agencies, and Approval Bodies . . . . . . . . . . . . . . 11
Product Design and Testing . . . . . . . . . . . . . . . . . 12
ISO 9001:2000 Certified . . . . . . . . . . . . . . . . . . 13
Figure 372 Concentric Reducers,
Small End Threaded (Male) . . . . . . . . . . . . . . . . . . . . . 59
Figure 395 Hose Adapter Nipples, Groove x Hose 60
Figure 380 Female Thread Adapters
Groove x Female Thread . . . . . . . . . . . . . . . . . . 60
Figures 391, 392 & 393 Adapter Nipples . . . . . . . 61
Figures 397, 398 & 399
Concentric Swaged Nipples . . . . . . . . . . . . . . . . 62
Figure 324 90° True Wyes . . . . . . . . . . . . . . . . . 63
GRINNELL Website . . . . . . . . . . . . . . . . . . . . . . 14
Figure 314 45° Laterals . . . . . . . . . . . . . . . . . . . 64
Grooved Couplings . . . . . . . . . . . . . 15 – 34
Figure 330 Tee Wyes . . . . . . . . . . . . . . . . . .68 - 69
Grooved Couplings Table of Contents . . . . . . . . . . 16
Coupling Specifications . . . . . . . . . . . . . . . . . . . 17
Figure 772 Rigid Couplings . . . . . . . . . . . . .18 - 19
Figure 707 Heavy Duty Flexible Couplings . . .20 - 21
Figure 705 Flexible Couplings . . . . . . . . . . . . . . . 22
Figure 770 High Pressure Rigid Couplings . . . . . . 23
Figure 716 Flexible Reducing Couplings . . . . . . . . 24
Figure 780 Grooved Snap Couplings . . . . . . . . . . 25
Figure 702 Mechanical Outlet Couplings . . . .26 - 27
Figure 71 Flange Adapters
(ANSI Class 125/150) . . . . . . . . . . . . . . . .28 - 29
Figure 325 45° Reducing Laterals . . . . . . . . .65 - 67
Figure 331 Reducing Tee Wyes . . . . . . . . . . . . . . 70
Figures 227 & 327 Crosses . . . . . . . . . . . . . . . . 71
Figures 260 & 360 End Caps . . . . . . . . . . . . . . . 72
Figure 341 & 342 Flange Adapters (ANSI) . . . . . 73
Figure 343 & 344 Flange Adapters (PN16). . . . . . 74
Mechanical Tees . . . . . . . . . . . . . . . . 75 – 82
Mechanical Tees Table of Contents . . . . . . . . . . . . 76
Mechanical Tees Specifications . . . . . . . . . . . . . . 76
Figure 730 Mechanical Tees & Crosses –
Threaded . . . . . . . . . . . . . . . . . . . . . . . . . .77 - 79
Figure 71 Flange Adapters
(PN10/PN16). . . . . . . . . . . . . . . . . . . . . . .30 - 31
Figure 730 Mechanical Tees & Crosses –
Grooved . . . . . . . . . . . . . . . . . . . . . . . . . .80 - 82
Figure 71 Flange Adapters
(AS2129 Table E) . . . . . . . . . . . . . . . . . . . . . . . 32
Valves . . . . . . . . . . . . . . . . . . . . . . . 83 – 96
Flange Adapter Washers . . . . . . . . . . . . . . . . . . 33
Coupling Installation Information . . . . . . . . . . . . . 34
Valves Table of Contents . . . . . . . . . . . . . . . . . . . 84
Model B8101 Low Profile Butterfly Valves . . . . . . . 85
Model B302 Grooved End Butterfly Valves . . .86 - 89
Grooved Fittings . . . . . . . . . . . . . . . 35 – 74
Model 308 Butterfly Valves . . . . . . . . . . . . . .90 - 91
Grooved Fittings Table of Contents . . . . . . . . . . . . 36
Model BV835 Ball Valves . . . . . . . . . . . . . . .92 - 93
Fittings Specifications . . . . . . . . . . . . . . . . . . . . . 37
Model 590 Grooved End Check Valves . . . . .94 - 95
Figure 210 90° Cast Elbows . . . . . . . . . . . . . . . . 38
Model TD830 Triple Duty Valves . . . . . . . . . . . . . 96
Figures 210LR & 310LR 90° Long Radius Elbows . . 38
Circuit Balancing Valves . . . . . . . . . 97 – 104
Figure 201 45° Cast Elbows . . . . . . . . . . . . . . . . 39
Figures 201LR & 301LR 45° Long Radius Elbows . . 39
Figures 212 & 312 221⁄2° Elbows . . . . . . . . . . . . 40
Figures 211 & 311 111⁄4° Elbows . . . . . . . . . . . . 41
Figure 315 Groove x Male Thread 90° Elbows . . . 42
Figure 316 Reducing Base Support Elbow . . . . . . . 42
Long Radius 3D Elbows . . . . . . . . . . . . . . . . . . . 43
Long Radius 5D Elbows . . . . . . . . . . . . . . . . . . . 44
Long Radius 6D Elbows . . . . . . . . . . . . . . . . . . . 45
Figures 219 & 319 Tees . . . . . . . . . . . . . . . . . . . 46
2
Circuit Balancing Valves Table of Contents . . . . . . 98
CB800 Circuit Balancing Valves . . . . . . . . . . . . . 99
Model CB800 Solder Ends . . . . . . . . . . . . . . . . 100
Model CB800 Threaded Ends . . . . . . . . . . . . . . 100
Model CB800 Grooved Ends . . . . . . . . . . . . . . 101
Model CB800 Flanged Ends, ANSI Class 125# . . 102
Model CB800 Flanged Ends, PN16/PN10 . . . . . 103
Model CB800 Insulation Kits . . . . . . . . . . . . . . . 104
Model CB800 MC2 Measuring Computer . . . . . . 104
Figure 320 Groove x Groove x Male Thread Tees . 47
Accessories . . . . . . . . . . . . . . . . . 105 – 116
Figures 221 & 321 Reducing Tees . . . . . . . . .48 - 50
Accessories Table of Contents . . . . . . . . . . . . . . 106
Figure 323 Groove x Groove x Male Thread
Reducing Tees . . . . . . . . . . . . . . . . . . . . . . . .51 - 52
Figure S853 “Y” Strainers . . . . . . . . . . . . . . . . 107
Figures 250 & 350 Concentric Reducers . . . . . .53 - 55
Figure S855 Tee Strainers . . . . . . . . . . . . . . . . . 110
Figures 251 & 351 Eccentric Reducers . . . . . .56 - 58
Figure 7550 Expansion Joint . . . . . . . . . . . 111 - 116
Figure S810 Suction Diffusers . . . . . . . . . . 108 - 109
www.grinnell.com
Copper Systems . . . . . . . . . . . . . . 117 – 130
Figures 991, 992, 993 Plain End Adapter Nipples153
Copper Systems Table of Contents . . . . . . . . . . . 118
Figure 941 & 942 Plain End Flange Adapters . . . 154
Copper Systems Specifications . . . . . . . . . . . . . 119
Stainless Steel G-PRESS Systems . . 155 – 168
Figure 640 Pivot-Bolt Rigid Coupling . . . . . . . . . 120
G-PRESS Systems Table of Contents . . . . . . . . . . 156
Figure 672 Rigid Coupling . . . . . . . . . . . . . . . . 121
G-PRESS Systems Specifications . . . . . . . . . 157 - 158
Figure 61 Flange Adapter. . . . . . . . . . . . . . . . . 122
Figure 407 Straight Couplings (Press x Press) . . . 159
Figure 610 90° Elbows . . . . . . . . . . . . . . . . . . 123
Figure 408 Slip Couplings (Press x Press) . . . . . . 159
Figure 601 45° Elbows . . . . . . . . . . . . . . . . . . 123
Figure 468 90° Elbows (Press x Press) . . . . . . . . 160
Figure 619 Tee . . . . . . . . . . . . . . . . . . . . . . . . 124
Figure 467 90° Elbows (Male x Female) . . . . . . . 160
Figure 660 Cap . . . . . . . . . . . . . . . . . . . . . . . 124
Figure 471 45° Elbows (Press x Press) . . . . . . . . 161
Figure 621 Reducing Tee . . . . . . . . . . . . . . . . . 125
Figure 470 45° Elbows (Male x Female) . . . . . . . 161
Figure 618 Reducing Tee . . . . . . . . . . . . . . . . . 126
Figure 442 Equal Tees (Press x Press x Press) . . . . 162
Figures 650 Concentric Reducer . . . . . . . . . . . . 127
Figure 473 Reducing Tees (Press x Press x Press) . 162
Figures 652 Concentric Reducer . . . . . . . . . . . . 127
Figure 478 Tee and Reducing Tee Adapters
(Press x Press x Female NPT) . . . . . . . . . . . . . . . 163
Model B680 Butterfly Valve with Lever Handle . . . 128
Figures 407GT & 407T Dielectric Waterways . . . 129
Figure 474 Reducers (Female Press x Male Press) . 164
Figures 407GG Dielectric Waterways . . . . . . . . 130
Model 1039-66 Roll Groover . . . . . . . . . . . . . . 130
Figure 476 Straight Connectors
(Female Press x Male NPT) . . . . . . . . . . . . . . . . 164
Stainless Steel Systems . . . . . . . . 131 – 142
Figure 479 Straight Connectors
(Female Press x Female NPT) . . . . . . . . . . . . . . . 165
Stainless Steel Systems Table of Contents . . . . . . 132
Figure 485 3-Piece Unions (Press x Press) . . . . . . 165
Stainless Steel Systems Coupling Specifications . . 133
Figure 484 End Caps (Female Press) . . . . . . . . . 166
Stainless Steel Systems Fitting Specifications . . . . 133
Figure 466 Van Stone Flange Adapters
(Female Press x Flange) . . . . . . . . . . . . . . . . . . 166
Figure 472 Stainless Steel Rigid Couplings . . . . . 134
Figure 405 Stainless Steel Flexible Couplings . . . 135
Figure 410 90° Stainless Steel Elbows . . . . . . . . 136
Figure 475 Flange Adapters
(Female Press x Flange) . . . . . . . . . . . . . . . . . . 167
Figure 401 45° Stainless Steel Elbows . . . . . . . . 136
Figure 469 Ball Valves (Press x Press) . . . . . . . . . 167
Figure 419 Tees . . . . . . . . . . . . . . . . . . . . . . . 137
Figure 460 End Caps . . . . . . . . . . . . . . . . . . . . 138
HDPE Systems . . . . . . . . . . . . . . . 169 – 174
HDPE Systems Table of Contents . . . . . . . . . . . . 170
Figure 421 Reducing Tees . . . . . . . . . . . . . . . . . 139
HDPE Specifications . . . . . . . . . . . . . . . . . . . . . 170
Figure 450 Concentric Reducers . . . . . . . . . . . . 140
Figure 9095 HDPE Couplings . . . . . . . . . . . . . . 171
Figure 451 Eccentric Reducers . . . . . . . . . . . . . 141
Figure 9097 HDPE Transition Couplings . . . . . . . 172
Figure 441 Flange Adapters (ANSI Class 150#) . 142
Figure 9094 Flange Couplings . . . . . . . . . . . . . 173
Plain End Systems . . . . . . . . . . . . 143 – 154
HDPE Pipe Wall Thickness and Standard
Dimension Ratios . . . . . . . . . . . . . . . . . . . . . . . 174
Plain End Systems Table of Contents . . . . . . . . . . 144
Plain End Systems Coupling Specifications . . . . . 145
Plain End Systems Fitting Specifications . . . . . . . 145
G-MINE PVC Systems . . . . . . . . . . 175 – 190
Figure 909 Plain End Couplings . . . . . . . . . . . . 146
Figure 910 90° Plain End Elbows . . . . . . . . . . . 147
Figure 901 45° Plain End Elbows . . . . . . . . . . . 147
Figure 910LR 90° Plain End Long Radius Elbows . 148
Figure 901LR 45° Plain End Long Radius Elbows . 148
Figure 919 Plain End Tees . . . . . . . . . . . . . . . . 149
Figure 921 Plain End Reducing Tees . . . . . . . . . . 149
Figure 927 Plain End Crosses . . . . . . . . . . . . . . 150
Figure 960 Plain End Caps . . . . . . . . . . . . . . . . 150
Figure 924 Plain End True Wyes . . . . . . . . . . . . 151
Figure 914 Plain End Laterals . . . . . . . . . . . . . . 151
Figure 999 Plain End Swaged Nipples . . . . . . . . 152
Refer to back cover for country-specific customer care numbers.
G-MINE PVC Systems Table of Contents . . . . . . . 176
G-MINE PVC Systems Specifications . . . . . . . . . . 177
Figure 72900 SDR Pipe (Spline x Spline) . . . . . . 178
Figure 72901 SDR Pipe with Coupling
(Male Spline x Female Spline) . . . . . . . . . . . . . . 179
Figure 72904 Couplings (Spline x Spline) . . . . . . 180
Figure 72905 Couplings (Spline x Solvent Weld) . 180
Figure 72919 Reducing Couplings
(Male Spline x Female Spline) . . . . . . . . . . . . . . 181
Figure 72940 Male Outlet Couplings
(Male Spline x Female Spline x Female Thread) . . 181
Figure 72930 Outlet Couplings
(Spline x Spline x Female Thread) . . . . . . . . . . . 182
3
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
TABLE OF CONTENTS
Figure 72906 Spline x Plain End Nipples
(Spline x Plain End) . . . . . . . . . . . . . . . . . . . . . 182
Model 4033 Pipe Support Stands . . . . . . . . . . . 211
Figure 72907 Nipples (Spline x Groove) . . . . . . 183
Model 3013 Porta-Bore . . . . . . . . . . . . . . . . . . 212
Figure 72908 Nipples (Spline x Male Thread) . . . 183
Model 4037 Nipple Bracket . . . . . . . . . . . . . . . 212
Figure 72909 Nipples (Plain End x Male Thread) . 184
Figure 72911 Nipples (Spline x Spline) . . . . . . . 184
Figure 72910 90° Elbows (Spline x Spline) . . . . . 185
Figure 72912 45° Elbows (Spline x Spline) . . . . . 185
Figure 72913 90° Sweep Elbows (Spline x Spline)186
Figure 72914 45° Sweep Elbows (Spline x Spline)186
Figure 72915 Caps (Female Spline) &
Plugs (Male Spline) . . . . . . . . . . . . . . . . . . . . . 187
Model 4040 Pipe Support Stands . . . . . . . . . . . 211
Pressure & Design Data . . . . . . . . 213 – 226
Design Data . . . . . . . . . . . . . . . . . . . . . . . . . . 214
Thermal Movement . . . . . . . . . . . . . . . . 215 - 216
Misalignment and Deflection . . . . . . . . . . . . . . . 217
Pipe Support Data . . . . . . . . . . . . . . . . . 218 - 220
Flexible Joints . . . . . . . . . . . . . . . . . . . . . . . . . 218
Rigid Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
Figure 72916 Flange Adapters (Spline x Flange) . 187
Rotation Movement . . . . . . . . . . . . . . . . . . . . . 219
Figure 72917 Tees (Spline x Spline x Spline) . . . . 188
Linear Movement . . . . . . . . . . . . . . . . . . . . . . . 219
Figure 72918 Reducing Tees
(Spline x Spline x Spline) . . . . . . . . . . . . . . . . . 188
Angular Movement . . . . . . . . . . . . . . . . . . . . . 220
Model B8200L G-MINE Butterfly Valves
(Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . 189
Vertical Piping . . . . . . . . . . . . . . . . . . . . . . . . 221
Pipe Support . . . . . . . . . . . . . . . . . . . . . . . . . . 220
Figure 72999 Splines . . . . . . . . . . . . . . . . . . . 190
Maximum Pressure Ratings (psi) on
ANSI 304/316 Stainless Steel . . . . . . . . 222 - 223
Figure ITGM Insertion Tools . . . . . . . . . . . . . . . . 190
Global Pipe Size Designations . . . . . . . . . . . . . 224
Figure 72899 Replacement Gaskets . . . . . . . . . . 190
Metric/Imperial Conversion Chart . . . . . . . . . . . 225
Gaskets . . . . . . . . . . . . . . . . . . . . 191 – 198
Flange Drilling Specifications . . . . . . . . . . . . . . 226
GRINNELL Gasket Types . . . . . . . . . . . . . . . . . . 192
GRINNELL Mechanical Services . . . 227 – 230
Gasket Styles . . . . . . . . . . . . . . . . . . . . . . . . . 193
GRINNELL Gasket Grade & Recommendations . . . 194
Gasket Air, Water & Chemical
Recommendations . . . . . . . . . . . . . . . . . . 195 - 197
Indices . . . . . . . . . . . . . . . . . . . . 231 – 242
Figure Number Indices . . . . . . . . . . . . . . . 232 - 233
Product Name Indices . . . . . . . . . . . . . . . 234 - 237
GRINNELL Gasket Lubricants . . . . . . . . . . . . . . . 198
Keyword Indices . . . . . . . . . . . . . . . . . . . 238 - 242
Preparation Equipment . . . . . . . . 199 – 212
10-Year Limited Warranty . . . . . . . . . . 243
Preparation Equipment Table of Contents . . . . . . 200
Contact Information . . . . . . . . . . Back Cover
Roll Groove Standard Specifications . . . . . . . . . 201
Cut Groove Standard Specifications . . . . . . . . . . 202
Roll Groove Standard Specifications - Copper . . . 203
Pipe Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
Model 1112 Portable Roll Groovers . . . . . . . . . . 205
Model 1023 Portable Roll Groovers . . . . . . . . . . 205
Model 1012 Portable Roll Groovers . . . . . . . . . . 206
Model 1022 Portable Roll Groovers . . . . . . . . . . 206
Model 1041 Portable Roll Groovers . . . . . . . . . . 206
Model 1039-66 MINI-MITES Field Portable . . . . . 207
Model 1039 MINI-MITES Field Portable . . . . . . . 207
Model 1034 MINI-MITES Field Portable . . . . . . . 207
Model 1066 MINI-MITES Field Portable . . . . . . . 207
Model 2021 Automated Roll Groovers . . . . . . . . 208
Model 2050 Automated Roll Groovers . . . . . . . . 209
Model 2112 Automated Roll Groovers . . . . . . . . 209
Model 1000 Portable Cut Groover. . . . . . . . . . . 210
Model 4031 Pipe Support Stands . . . . . . . . . . . 211
Model 4000 Pipe Support Stands . . . . . . . . . . . 211
4
www.grinnell.com
5
GENERAL DATA
GENERAL DATA
GRINNELL
MECHANICAL
PRODUCTS
GRINNELL, a premium brand of Tyco International, delivers
quality piping solutions for a full range of mechanical,
HVAC, mining, commercial, industrial, institutional, and
governmental applications. Available products offer
contractors, engineers, and distributors faster, more costeffective tools for joining pipe over traditional welding
methods. Innovative GRINNELL products include couplings,
fittings, mechanical tees, valves, and accessories as well
as complete systems for joining copper, stainless steel, plain
end, G-PRESS press-fit, HDPE, and G-MINE PVC components.
Comprehensive, competitively priced engineering and planning
support services provide labor and cost savings. All GRINNELL
products are backed by an industry-leading, 10-year limited warranty
except for G-MINE products, which carry a six-month warranty. For more
information, visit www.grinnell.com.
Regional Headquarters
Corporate Headquarters
Research and Development
MAKING CONNECTIONS…
Global Headquarters
Lansdale, Pennsylvania, USA
Research and Development
Cranston, Rhode Island, USA
REGIONAL HEADQUARTERS
North Asia
Shanghai, China
South Asia
Singapore
Australia
Sunshine, Victoria
Middle East
Dubai, United Arab Emirates
Europe
Enschede, The Netherlands
Paris, France
Manchester, U.K.
Rodgau, Germany
Budapest, Hungary
Milan, Italy
Wien, Austria
Mechelen, Belgium
Madrid, Spain
Lørenskog, Norway
Lammhult, Sweden
South America, Central America,
and Caribbean
Pompano, Florida, USA
Mexico
Tlalnepantla, Mexico
The products and specifications published herein are for general evaluation and reference purposes only and are subject to change by GRINNELL Mechanical Products without notice. For the
most up-to-date information, visit www.grinnell.com. The information provided in this catalog should not be relied on as a substitute for professional advice concerning specific applications.
ALTHOUGH GRINNELL MECHANICAL PRODUCTS ENDEAVORS TO ENSURE ACCURACY, ALL INFORMATION HEREIN IS PROVIDED ON AN “AS IS” BASIS, WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESS OR IMPLIED. Without limiting the foregoing, GRINNELL Mechanical Products does not warrant the accuracy, adequacy, or completeness of any such information. All
users of the information provided herein assume the risk of use or reliance on such information and GRINNELL Mechanical Products shall not be liable for any damages for such use including,
but not limited to, indirect, special, incidental, or consequential damages. Terms and Conditions of sale can be found on www.grinnell.com.
6
www.grinnell.com
GENERAL DATA
GENERAL DATA
B UILDING S O L U T I O NS
43 Stocking Warehouses
24 Manufacturing Locations
4,100 Employees in
34 Countries
Presence in 185 Countries
and 43 Languages
Refer to back cover for country-specific customer care numbers.
7
GENERAL DATA
GENERAL DATA
Why Grooved?
Reduced Installation Time and Cost
Methods such as welding and soldering are
labor intensive and can be very expensive in high-cost
regions. Pipe grooving reduces installation cost by up to
30%, allowing contractors to minimize labor costs and
remain within budget.
Retrofits and Repairs
When an owner is faced with the issue of not being able
to shut down a facility for important retrofits, GRINNELL
Mechanical Products is the right solution. GRINNELL
Couplings and Fittings allow an installer to fabricate
on-site and around complex problems and obstacles. Fire
permits are not required and building residents do not
have to evacuate due to welding fumes.
Pipe Expansion Support
GRINNELL Flexible Couplings absorb linear and angular
movements of pipe work due to temperature changes,
eliminating or minimizing the use of braided and bellow
type flex connectors. GRINNELL Mechanical Services
offers customers assistance with designing flexible
couplings into thermal expansion projects.
No Special Tools
Grooved Products are assembled onto a standard groove.
No special tools or additional training to complete the job
are required.
Compatibility With
Hazardous Environments
Grooved Pipe does not require welding, threading, or
cutting, eliminating cutting oils, fumes, and flames.
It is the ideal method for joining pipe in enclosed,
flammable, or hazardous sites like tunnels and mines. And
it doesn't require burn or hot-works permits.
Connection Consistency
When construction calls for robust piping applications,
GRINNELL Grooved Products maintain high pressures at
each connection without sacrificing quality and reliability.
GRINNELL Grooved Systems allow for quick assembly
that is simple and consistent from one worker to the next.
Projects are completed on time, and crews can readily
move on to their next installations.
8
www.grinnell.com
Why GRINNELL?
The Best Warranty in the Industry
GRINNELL Mechanical Products are backed by a
10-Year Limited Warranty, except for G-MINE which is
6 months. Our customers are proud to work with products
manufactured by a market leader with an established
brand name and a consistent history.
GRINNELL Mechanical Services
Our Services Group works seamlessly with engineers
and contractors to create the most cost-effective and
time-efficient piping solutions from design...to build.
Our experts specialize in CAD blocks, cost
comparisons, thermal movement analysis, and BIM.
Green Solutions
All GRINNELL Mechanical Products cast in our Anniston,
Alabama Plant are manufactured with 90% recycled metal
that would otherwise contribute to our world’s solid waste
stream. All waste paper, used cardboard, scrap wood,
and EPDM waste from our plants is recycled.
Industry Pioneer
GRINNELL Mechanical Products has been in the
pipe-joining business for over 160 years. We have
strategic stocking locations throughout the world to serve
our customers. We have the best channel partners who
are focused, as we are, on innovation and growth.
Global Presence
You can find our products in buildings and installations
all over the world. We provide global solutions that
flexibly address the challenges our customers face,
including design in one country for construction
in another.
Great Service
At GRINNELL Mechanical Services, the customer
always comes first. We pride ourselves on providing
knowledgeable sales support, timely technical service,
and quality customer care to all global customers.
Refer to back cover for country-specific customer care numbers.
9
GENERAL DATA
GENERAL DATA
GENERAL DATA
GENERAL DATA
Product Features and Benefits
NOISE AND VIBRATION
The resiliency of GRINNELL Grooved Couplings and versatility of various
available gaskets provide excellent noise and vibration dampening. The
engineered design of these couplings provides for pipe end gapping that helps to
dissipate, isolate, and minimize noise and vibration transmission throughout the
piping system.
DEPENDABILITY
The coupling housings are designed to engage into the grooves and provide a
secure joint. The pipe ends are sealed by a pressure responsive gasket that is
encapsulated by the ductile iron housing.
MISALIGNMENT
GRINNELL Flexible Couplings will accommodate misalignments. The maximum
deflection information per coupling can be found in this catalog.
SUPERIOR QUALITY
GRINNELL Piping Products are manufactured according to the
ISO 9001:2000 Quality Assurance standard.
LONGEVITY AND PERFORMANCE
GRINNELL Piping Products are designed to last the lifetime of the pipeline and
have been tested and approved by prominent approval agencies. Rolled grooving does not remove any metal from the pipe. Therefore, pipe integrity is fully
maintained when grooved systems are used to join pipe.
CLEAN
Unlike with welding, GRINNELL Piping Products do not lead to
hazardous fumes or to the possible introduction of foreign materials
in the pipeline.
10
www.grinnell.com
Agency Listings and Approvals
Our products bear the seal of approval from the following agencies, associations and laboratories.
General Code Groups, Associations, Laboratories,
Government Agencies, and Approval Bodies
ACS
ACTIVFIRE
Active Fire Protection
Product Certification
AP SAD
AMERICAN BUREAU
OF SHIPPING (ABS)
AMERICAN NATIONAL STANDARDS
INSTITUTE (ANSI)
AMERICAN WATER WORKS ASSOCIATION
(AWWA) AWWA C-606
AMERICAN PETROLEUM INSTITUTE (API)
API Std. 5L, Sect. 7.5
AMERICAN SOCIETY OF HEATING,
REFRIGERATION AND AIR CONDITIONING
ENGINEERS (ASHRAE)
AMERICAN SOCIETY OF
MECHANICAL ENGINEERS (ASME)
• Power Piping, B-31.1
• Chemical Plant and Petroleum Refinery
Piping, B-31.3
• Refrigeration Piping, B-31.5
• Building Services Piping, B31.9
• Elevator, Escalator, A17.1
ARPA
BUILDING OFFICIALS AND CODE
ADMINISTRATORS (BOCA)
BUREAU VERITAS (BV)
CNBOP
Centrum Naukowo-Badawcze
Ochrony Przeciwpozarowe
COAST GUARD
Approved each vessel individually
CORPS OF ENGINEERS (COE)
GEGS 15000
CRN
Canadian Registration Number
CSTB
DNV
Det Norske Veritas
DVGW
Deutscher Verein des
Gas-und Wasserfaches e.V.
FACTORY MUTUAL
ENGINEERING CORP. (FM)
Approved for Fire Protection Services
FEDERAL AVIATION ADMINISTRATION (FAA)
HVAC, Plumbing and Fire Protection
FEDERAL HOUSING ADMINISTRATION (FHA)
GENERAL SERVICES ADMINISTRATION (GSA)
15000 Series
GERMANISCHER LLOYD
INTERNATIONAL ASSOCIATION
OF PLUMBING AND
MECHANICAL OFFICIALS (IAPMO)
ICC-ES
National Evaluation Service, Inc.
IPC
Association Connecting
Electronics Industries
LLOYD’S
Lloyd’s Register
of Shipping
LOSS PREVENTION
CERTIFICATION BOARD (LPCB)
Approved for Fire Protection Services
MATERIAL EQUIPMENT AND
ACCEPTANCE (MEA)
NATIONAL FIRE PROTECTION
ASSOCIATION (NFPA)
NATIONAL SANITATION
FOUNDATION (NSF)
The Public Health and Safety Company
PAVUS
PCT
PRESSURE EQUIPMENT DIRECTIVE
RINA
Registro Italiano Navale
T/S/U
SOUTHERN BUILDING CODE CONGRESS
INTERNATIONAL (SBCCI)
Standard Plumbing
UNDERWRITERS
LABORATORIES, INC. (UL)
Listed for Fire
Protection Services
UNDERWRITERS
LABORATORIES OF CANADA (ULC)
Listed for Fire Protection Services
UNIFORM
PLUMBING
CODE (UPC)
VERBAND DER
SACHVERSICHERE E.V. (VDS)
Approved for Fire Protective Service
MILITARY SPECIFICATIONS (MIL)
• MIL-P – 10388 Fittings
• MIL-C – 10387 Couplings
• MIL-P – 11087A (CE) Steel Pipe
• Grooved MIL-I – 45208 Inspection
VETERANS AFFAIRS (VA)
15000 Series
NATIONAL AERONAUTICS AND SPACE
ADMINISTRATION (NASA)
WRAS
Water Regulations
Advisory Scheme (UK)
NATIONAL INSTITUTE OF HEALTH (NIH)
Department of Health – 5000 Series
NAVAL FACILITIES ENGINEERING
COMMAND (NAVFAC)
NFGS 15000 Series
Refer to back cover for country-specific customer care numbers.
WATERMARK
Pending Approved for Potable Water
Service (AU)
WSD
Pending Approved for Potable Water
Service (HK)
97/23/EC
97/23/EC
11
GENERAL DATA
GENERAL DATA
GENERAL DATA
GENERAL DATA
Product Design and Testing
Pre-Manufactured/Product Design
All GRINNELL Mechanical Products are designed and tested at our state-of-the-art Research and Development Technology Center
in Cranston, Rhode Island, USA.
Foundry and Assembly
Casting
Rubber Injection
Paint Process
Tooling
GRINNELL castings poured
at our foundry are made of
ductile iron ASTM A 536m,
Grade 65-45-12. A rigorous
quality control program
monitors all steps of the
manufacturing process.
Samples are continuously
tested chemically and
physically to ensure all
products meet our high
material specifications.
We manufacture our gaskets
using rubber injection
presses and tooling to mold
different types of rubber
compounds specifically
designed for the many
applications required by
our customers. Physical
tests are performed on
finished gasket samples
to verify compliance with
specifications including
ASTM D 2000.
Using a computer controlled
process, each product is
spray-washed, dried, preheated, dipped, and fully
cured prior to assembly or
packaging. All integral parts
are inspected to maintain
consistent paint coverage
and surface condition.
Using product designs
from our Research and
Development Department,
our pattern center and
contracted pattern makers
design and build patterns
and molds that produce
products to the highest
tolerances. Tooling is
continually inspected by our
in-house certified specialists
to ensure finished products
meet our specifications and
requirements of approving
agencies.
12
www.grinnell.com
ISO 9001:2000 Certified
&HUWLILFDWHRI4XDOLW\ 6\VWHP
5HJLVWUDWLRQ
7<&2 )/2: &21752/ 0 6'1 %+'
7<&2 ),5( 68335(66,21 %8,/',1* 352'8&76 0$/$<6,$
/RW &
& -DODQ 6XEDQJ 7DPDQ 3HULQGXVWULDQ 6XEDQJ
6XEDQJ 6HODQJRU 0DOD\VLD
KDV FRPSOLHG ZLWKWKH UHTXLUHPHQWV RI WKHIROORZLQJ
,62
DQG LV DXWKRULVHGWR XVHWKH /3&% PDUN RQ VWDWLRQHU\
DQG SXEOLFDWLRQV UHODWHG WR WKH IROORZLQJ SURGXFWV
DQGRU VHUYLFHV
$VVHPEO\ RI FRXSOLQJV DQG PDUNHWLQJ RI FRXSOLQJV DQG ILWWLQJV
7 $ +XQWHU
IRU DQG RQ EHKDOI RI /3&%
&HUWLILFDWH 1R
,VVXH 1XPEHU
'DWH RI ,VVXH
'HFHPEHU
'DWH RI ([SLU\ 'HFHPEHU
/3&% LV SDUW RI %5( *OREDO /LPLWHG :DWIRUG :' ;; 7 ) : ZZZUHGERRNOLYHFRP
7KLV FHUWLILFDWH UHPDLQV WKH SURSHUW\ RI %5( *OREDO /WG DQG LV LVVXHG VXEMHFW WR WHUPV DQG FRQGLWLRQV,W LV PDLQWDLQHG DQG KHOG LQ IRUFH
WKURXJK DW OHDVW DQQXDO UHYLHZ DQG YHULILFDWLRQ 7R FKHFN WKH YDOLGLW\ RI WKLV FHUWLILFDWH SOHDVH YLVLW ZZZUHGERRNOLYHFRP RU FRQWDFW XV
%5( *OREDO /WG
Refer to back cover for country-specific customer care numbers.
13
GENERAL DATA
GENERAL DATA
GENERAL DATA
GENERAL DATA
GRINNELL Website
www.grinnell.com
To learn more about GRINNELL Mechanical Products, visit www.grinnell.com.
Our Website provides a wide variety of tools and information at your fingertips.
Browse These Website Features
My Submittals Tab
This tool, useful in bidding, allows you
to sign-up for a GRINNELL account.
You can then create, save, print,
and manage project submittals. Your
account information is available
24/7 through our website.
Resources Tab
Useful for everyday operations, the
Resources tab includes a conversion
calculator to convert many units of
measurement and a Product Cross
Reference tool to search for GRINNELL
Mechanical Product equivalents.
Literature Tab
The Literature tab showcases all
marketing materials for viewing,
downloading, or saving to your
preferred location. Marketing
literature includes catalogs, brochures,
installation manuals, flyers, and
price books.
Products Tab
The Products tab organizes all
product information such as pricing,
technical data, 3D CAD drawings,
and part summary sheets. All product
information is available for printing
and saving to your preferred location.
Searching for any product by name
or figure number and downloading
custom submittal sheets are also
available through this tab.
GRINNELL Home Page
Tech Data
The Tech Data icon provides direct
access to technical information on all
of our products. It also provides access
to online registration for automatic
e-mail updates.
14
www.grinnell.com
15
GROOVED COUPLINGS
GROOVED COUPLINGS
Grooved Couplings Table of Contents
GRINNELL Couplings are designed for grooved end pipe and
are available in nominal sizes of 1" (25mm) to 24" (600mm)
including BS, ISO, and JIS outside diameters.
The GRINNELL Coupling Design provides economical
advantages when compared to welded or flanged systems.
GRINNELL Couplings provide a universal method for
connecting pipe, fittings, and pipe system components.
Figure 772
Rigid Couplings
Pages 18 - 19
Figure 707
Heavy Duty Flexible Couplings
Pages 20 - 21
Figure 705
Flexible Couplings
Page 22
Figure 770
High Pressure Rigid Couplings
Page 23
Figure 716
Flexible Reducing Couplings
Page 24
Figure 780
Grooved Snap Couplings
Page 25
GRINNELL Couplings and Gaskets permit a wide selection of
combinations for specific applications.
Field modifications are easily accommodated with GRINNELL
Mechanical Products as the couplings can be easily rotated,
eliminated and/or added to facilitate necessary modifications.
Figure 640
Pivot-Bolt Rigid Couplings
Page 120
Figure 672
Rigid Couplings
Page 121
Figure 61
Flange Adapters
Page 122
Figure 472
Stainless Steel Rigid Couplings
Page 134
Figure 405
Stainless Steel Flexible
Couplings
Page 135
Figure 909
Plain End Couplings
Page 146
Figure 9095
HDPE Couplings
Page 171
Figure 702
Mechanical Outlet Couplings
Pages 26 - 27
Figure 71
Flange Adapters
Pages 28 - 33
16
Figure 9097
HDPE Transition Couplings
Page 172
Figure 9094
HDPE Flange Couplings
Page 173
www.grinnell.com
GROOVED COUPLINGS
GROOVED COUPLINGS
Additional Features:
• Two-piece, tongue-and-groove design allows for fast and
easy installation.
Full contact between Figure 772
Coupling key and groove diameter
MATERIAL SPECIFICATIONS
Ductile Iron Housing Specifications
• ASTM A 536 – Standard specification for ductile iron
castings, Grade 65-45-12
• Tensile strength, minimum 65,000 psi (4481.6 bar)
• Yield strength, minimum 45,000 psi (3102.6 bar)
• Elongation in 2" (50mm), minimum 12%
• ASTM A 153 – Standard specification for hot-dip
galvanizing
Bolt/Nut Specifications
• ANSI: Carbon steel oval neck bolts and nuts are heattreated and conform to the physical properties of ASTM
A 183 Grade 2 and SAE J429 Grade 5 with a minimum
tensile strength of 110,000 psi (7584.2 bar).
Carbon Steel heavy hex nuts conform to the physical
properties of ASTM A 183 Grade 2 and SAE J995
Grade 5. Bolts and nuts are zinc-electroplated
conforming to ASTM B 633.
• Metric: Carbon steel oval neck track head bolts (Gold
color coded) are heat treated and conform to the physical
properties of ASTM F 568 M with a minimum tensile
strength of 760 MPa.
Carbon Steel heavy hex nuts conform to the physical
properties of ASTM A 563 M Class 9. Bolts and nuts are
zinc-electroplated conforming to ASTM B 633.
• Stainless steel bolts and nuts are available upon request.
Coatings
• Orange – Non-lead paint (standard)
• Red – Non-lead paint (optional, regional)
• Hot-Dipped, Zinc Galvanized (optional)
Warning: For a one time field test only the maximum joint
working pressure may be increased to 1½ x the figures shown.
• Standard industry groove does not require special tools.
• Backed by the industry’s best 10-Year Limited
Warranty, except for G-MINE which is 6
months. Review terms and conditions of sale
on www.grinnell.com.
Gasket Specifications
• Grade “E” EPDM gaskets have a Green color code
identification and conform to ASTM D 2000 for service
temperatures from -30°F to 230°F (-34°C to 110°C). They
are recommended for hot water not to exceed 230°F
(110°C), plus a variety of dilute acids, oil free air, and
many chemical services. They are not recommended for
petroleum services. For low temperature and vacuum
systems, a Tri-Seal Grade “E” EPDM gasket with a rigid
coupling is recommended.
• Grade “T” Nitrile gaskets have an Orange color code
identification and conform to ASTM D 2000 for service
temperatures from -20°F to 180°F (-29°C to 82°C). They
are recommended for petroleum products, vegetable oils,
mineral oils, and air with oil vapors.
• Grade “L” Silicone gaskets are Red and conform to
ASTM D 2000 for service temperatures from -30°F to
350°F (-34°C to 177°C). They are recommended for air
without hydrocarbons, or dry heat.
• Grade “O” Fluoroelastomer gaskets have a Blue
color code and conform to ASTM D 2000 for service
temperatures from +20°F to 300°F (-7°C to 149°C).
They are recommended for oxidizing acids, petroleum
products, hydraulic fluids, lubricants, and halogenated
hyrdrocarbons.
• Grade “EN” NSF-61 Approved gaskets have a
Copper color code and are for potable water systems
up to 180°F (82°C). They are not recommended for
petroleum service.
• Grade “EHT” EPDM NSF-61 Certified center-stop,
push-on style gaskets for copper tubing systems, have a
Red and Copper stripped color code. For closed-loop
heating systems from -30°F to 250°F (-34°C to 120°C)
and potable water systems up to 180°F (up to 82°C).
Recommended for use in low temperature and vacuum
systems. They are not recommended for petroleum service.
Refer to back cover for country-specific customer care numbers.
17
GROOVED COUPLINGS
Figure 772 Rigid Couplings
GROOVED COUPLINGS
(Page 1 of 2)
The GRINNELL Figure 772 Rigid Coupling provides a rigid joint by firmly
gripping along the full 360° circumference of the pipe grooves. This
coupling offers a dependable method of joining pipe and is an economical
alternative to welding, threading, or using flanges. The GRINNELL Figure
772 Rigid Coupling is UL Listed for grounding and bonding, and is suitable
for bonding systems with a maximum service entrance capacity of 200
amps. Sizes 11⁄4" – 8" (32mm – 200mm) feature a
clamshell design that makes installation easier and
faster.
Tech Data Sheet: G141
)RUDGGLWLRQDOOLVWLQJVRU
DSSURYDOVVHHSDJHRU
YLVLWRXUZHEVLWHDW
ZZZJULQQHOOFRP
B
B
B
C
A
18
A
A
11⁄4" - 14" (32mm - 350mm)
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
11 ⁄ 4
1.660
32
42,4
1.900
11 ⁄ 2
40
48,3
2
2.375
50
60,3
21 ⁄ 2
2.875
65
73,0
76,1mm
3.000
65
76,1
3
3.500
80
88,9
4
4.500
100
114,3
139,7mm
5.500
125
139,7
5
5.563
125
141,3
165,1mm
6.500
150
165,1
6
6.625
150
168,3
8
8.625
219,1
200 ◗
C
C
16" - 18" (400mm - 450mm)
Max.†
Pressures
psi
bar
Max.†
End Load
Lbs.
kN
Max.*‡ End
Gap
Inches
mm
750
51,7
750
51,7
750
51,7
750
51,7
750
51,7
750
51,7
750
51,7
750
51,7
750
51,7
700
48,3
700
48,3
600
41,4
1,623.2
7,22
2,126.5
9,46
3,322.6
14,78
4,868.9
21,66
5,301.4
23,58
7,215.8
32,10
11,928.2
53,06
17,818.7
79,26
18,229.3
81,09
23,228.2
103,18
24,130.1
107,34
35,055.8
155,94
0.06
1,5
0.08
2,0
0.13
3,3
0.13
3,3
0.13
3,3
0.13
3,3
0.19
4,8
0.19
4,8
0.19
4,8
0.19
4,8
0.19
4,8
0.19
4,8
20" - 24" (500mm - 600mm)
Dimensions - Inches mm
A
B
C
2.75
69,9
3.00
76,2
3.41
86,6
3.91
99,3
4.19
106,4
4.63
117,6
5.81
147,6
7.02
178,3
7.09
180,1
8.09
205,5
8.09
205,5
10.56
268,2
4.38
111,3
4.62
117,3
5.70
145,0
6.30
160,0
6.43
163,0
6.93
176,0
8.07
205,0
9.72
246,9
9.71
246,6
10.53
267,5
10.53
267,5
13.56
344,4
1.81
46,0
1.81
46,0
1.88
47,8
1.88
47,8
2.00
50,8
1.88
47,8
1.97
50,0
2.06
52,3
2.04
51,8
2.13
54,1
2.13
54,1
2.62
66,5
Coupling Bolts
Size
Qty.
Inches
mm
3
⁄ 8 x 21 ⁄4
2
M10 x 57
3
⁄ 8 x 21 ⁄4
2
M10 x 57
1
⁄2 x 3
2
M12 x 89
1
⁄2 x 3
2
M12 x 89
–
2
M12 x 89
1
⁄2 x 3
2
M12 x 89
1
⁄2 x 3
2
M12 x 89
–
2
M16 x 83
5
⁄ 8 x 31 ⁄ 4
2
M16 x 83
–
2
M16 x 83
5
⁄ 8 x 31 ⁄ 4
2
M16 x 83
3
⁄4 x 43 ⁄4
2
M20 x 121
Approx.
Weight
Lbs.
kg
2.0
0,9
2.2
1,0
3.0
1,4
3.3
1,5
3.4
1,5
4.0
1,8
4.6
2,1
7.5
3,4
7.5
3,4
7.6
3,4
7.6
3,4
16.9
7,7
www.grinnell.com
GROOVED COUPLINGS
Figure 772 Rigid Couplings
Tech Data Sheet: G141
B
B
B
C
A
A
A
11⁄4" - 14" (32mm - 350mm)
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
10
10.750
273,0
250 ◗
12
12.750
323,9
300 ◗
14
14.000
350
355,6
16
16.000
400
406,4
18
18.000
450
457,2
20
20.000
500
508,0
24
24.000
600
609,6
C
C
16" - 18" (400mm - 450mm)
Max.†
Pressures
psi
bar
Max.†
End Load
Lbs.
kN
Max.*‡ End
Gap
Inches
mm
500
34,5
400
27,6
300
20,7
300
20,7
300
20,7
300
20,7
250
17,2
45,381.3
201,87
51,070.5
227,17
46,181.4
205,43
60,318.6
268,31
76,340.7
339,58
94,247.8
419,23
113,097.3
503,08
0.13
3,3
0.13
3,3
0.13
3,3
0.13
3,3
0.25
6,4
0.25
6,4
0.25
6,4
20" - 24" (500mm - 600mm)
Dimensions - Inches mm
A
B
C
12.84
326,1
15.41
391,4
16.68
423,7
18.50
469,9
21.31
541,3
23.50
596,9
27.63
701,8
16.41
416,8
18.84
478,5
20.38
517,6
22.64
575,1
25.12
638,0
27.88
708,2
32.00
812,8
2.62
66,5
2.62
66,5
2.93
74,4
2.93
74,4
3.06
77,7
3.06
77,7
3.19
81,0
Coupling Bolts
Size
Qty.
Inches
mm
1 x 61 ⁄ 2
2
M24 x 165
1 x 61 ⁄ 2
2
M24 x 165
1 x 51 ⁄ 2•
2
–
1 x 51 ⁄ 2•
3
–
1 x 51 ⁄ 2•
3
–
11 ⁄ 8 x 5 3 ⁄ 4•
4
–
11 ⁄ 8 x 5 3 ⁄ 4•
4
–
Approx.
Weight
Lbs.
kg
25.9
11,7
35.4
16,0
45.0
20,4
60.6
27,5
79.0
35,8
97.0
44,0
120.0
54,4
* Maximum available gap between pipe ends. Minimum gap = 0.
† Maximum Pressure and End Load are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ for other
pipe materials and/or wall thicknesses. Contact GRINNELL Mechanical Products for details.
‡ Max End Gap is for cut grooved standard weight pipe. Values for roll grooved pipe will be half that of cut grooved.
• Only available in ANSI bolt sizes.
◗ Sizes are available to JIS standards. Contact GRINNELL Mechanical Products for details.
For information on larger sizes, European sizes or other alternative sizes, contact GRINNELL Mechanical Products.
See page 17 for coupling specifications and pages 191 - 198 for gasket information.
Refer to back cover for country-specific customer care numbers.
19
GROOVED COUPLINGS
(Page 2 of 2)
GROOVED COUPLINGS
Figure 707 Heavy Duty Flexible Couplings
GROOVED COUPLINGS
(Page 1 of 2)
The GRINNELL Figure 707 Heavy Duty Flexible Coupling allows for angular
and linear deflection, thermal expansion and contraction, and misalignments
of the pipe. Flexible couplings can act as an “expansion joint”, allowing
linear and angular movement of the pipes when properly installed. This
coupling is capable of pressures up to 1,000 psi (68,9 bar), depending on
pipe size and wall thickness. Suitable for use in a variety
of applications, the Figure 707 Coupling provides a
dependable method of joining pipe.
Tech Data Sheet: G130
)RUDGGLWLRQDOOLVWLQJVRU
DSSURYDOVVHHSDJHRU
YLVLWRXUZHEVLWHDW
ZZZJULQQHOOFRP
B
B
B
C
C
C
A
A
A
1" - 12" (25mm - 300mm)
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
1
1.315
25
33,7
1.660
11 ⁄ 4
32
42,4
11 ⁄ 2
1.900
40
48,3
2
2.375
50
60,3
21 ⁄ 2
2.875
65
73,0
76,1mm
3.000
65
76,1
3
3.500
80
88,9
4
4.500
100
114,3
139,7mm
5.500
125
139,7
5
5.563
125
141,3
165,1mm
6.500
150
165,1
6
6.625
150
168,3
8
8.625
200 ◗
20
219,1
14" - 18" (350mm - 450mm)
Max.†
Pressures
psi
bar
Max.†
End Load
Lbs
kN
Max.*‡
End Gap
Inches
mm
1000
68,9
1000
68,9
1000
68,9
1000
68,9
1000
68,9
1000
68,9
1000
68,9
1000
68,9
1000
68,9
1000
68,9
1000
68,9
1000
68,9
800
1,360.0
6,10
2,164.9
9,63
2,835.3
12,61
4,430.1
19,71
6,491.8
28,88
7,068.6
31,44
9,621.1
42,80
15,904.3
70,75
23,758.3
105,6
24,305.7
108,12
33,183.1
147,61
34,471.6
153,34
46,741.0
0.13
3,3
0.13
3,3
0.13
3,3
0.13
3,3
0.13
3,3
0.13
3,3
0.13
3,3
0.25
6,4
0.25
6,4
0.25
6,4
0.25
6,4
0.25
6,4
0.25
55,2
207,91
6,4
Deflection ‡
Degrees
Inches/Ft
Per
mm/m
Coupling
1.14
5° 26'
98,4
0.90
4° 19'
75,0
0.79
3° 46'
65,8
0.63
3° 1'
52,5
0.52
2° 29'
43,3
0.50
2° 23'
41,7
0.43
2° 3'
35,8
0.67
3° 11'
55,8
0.52
2° 30'
43,6
0.54
2° 35'
45,1
0.46
2° 12'
38,4
0.45
2° 10'
37,8
0.35
1° 40'
29,2
20" - 24" (500mm - 600mm)
Dimensions - Inches mm
A
B
C
2.38
60,5
2.76
70,0
2.97
75,4
3.54
89,9
4.06
103,1
4.19
106,4
4.69
119,1
5.95
151,1
7.02
178,3
7.08
179,8
8.19
208,0
8.30
210,8
10.68
4.00
101,6
4.37
111,0
4.63
117,6
5.25
133,4
5.75
146,1
5.75
146,1
6.38
162,1
8.25
209,6
10.00
254,0
10.00
254,0
11.25
285,8
11.25
285,8
14.00
1.81
46,0
1.81
46,0
1.81
46,0
1.88
47,8
1.88
47,8
1.88
47,8
1.88
47,8
2.06
52,3
2.04
51,8
2.06
52,3
2.06
52,3
2.06
52,3
2.47
271,3
355,6
62,7
Coupling Bolts
Size
Qty.
Inches
mm
1
⁄2 x 3
2
M12 x 89
1
⁄2 x 3
2
M12 x 89
1
⁄2 x 3
2
M12 x 89
1
⁄2 x 3
2
M12 x 89
1
⁄2 x 3
2
M12 x 89
–
2
M12 x 89
1
⁄2 x 3
2
M12 x 89
5
⁄ 8 x 31 ⁄ 4
2
M16 x 83
3
⁄4 x 43 ⁄4
2
M20 x 121
3
⁄4 x 43 ⁄4
2
M20 x 121
–
2
M20 x 121
3
⁄4 x 43 ⁄4
2
M20 x 121
7
⁄ 8 x 61 ⁄ 2
2
M22 x 165
Approx.
Weight
Lbs.
kg
2.0
0,9
2.2
1,0
2.5
1,1
3.0
1,4
3.5
1,6
4.0
1,8
4.0
1,8
7.0
3,2
8.3
3,8
10.0
4,5
12.0
5,4
11.1
5,0
21.4
9,7
www.grinnell.com
GROOVED COUPLINGS
Figure 707 Heavy Duty Flexible Couplings
Tech Data Sheet: G130
B
B
B
C
C
C
A
A
A
1" - 12" (25mm - 300mm)
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
14" - 18" (350mm - 450mm)
20" - 24" (500mm - 600mm)
Deflection ‡
Degrees
Inches/Ft
Per
mm/m
Coupling
Coupling Bolts
Size
Qty.
Inches
mm
Max.†
Pressures
psi
bar
Max.†
End Load
Lbs
kN
Max.*‡
End Gap
Inches
mm
10
10.750
800
72,610.1
0.25
250 ◗
12
273,0
55,2
322,99
6,4
12.750
800
102,141.0
0.25
323,9
55,2
454,35
6,4
14.000
355,6
16.000
406,4
18.000
457,2
20.000
508,0
24.000
609,6
300
20,7
300
20,7
300
20,7
300
20,7
250
17,2
46,181.4
205,43
60,318.6
268,31
76,340.7
339,58
94,247.8
419,23
113,097.3
503,08
0.25
6,4
0.25
6,4
0.25
6,4
0.25
6,4
0.25
6,4
300 ◗
14
350
16
400
18
450
20
500
24
600
1° 20'
1° 7'
1° 2'
0° 54'
0° 48'
0° 43'
0° 36'
Dimensions - Inches mm
A
B
C
0.28
13.06
16.44
2.63
23,3
331,7
417,6
66,8
0.23
15.39
18.84
2.63
19,5
390,9
478,5
66,8
0.22
18,0
0.19
15,8
0.17
14,0
0.15
12,5
0.13
10,5
16.67
423,4
18.83
478,3
21.31
541,3
23.47
596,1
27.58
700,5
20.38
517,7
22.64
575,1
25.12
638,0
27.88
708,2
32.00
812,8
2.94
74,7
2.94
74,7
3.06
77,7
3.06
77,7
3.19
81,0
2
2
3
3
3
4
4
Approx.
Weight
Lbs.
kg
1 x 61 ⁄ 2
29.0
M24 x 165
13,2
1 x 61 ⁄ 2
37.0
M24 x165
16,8
1 x 51 ⁄ 2•
–
1 x 51 ⁄ 2 •
–
1 x 51 ⁄ 2•
–
11 ⁄ 8 x 5 3 ⁄ 4•
–
11 ⁄ 8 x 5 3 ⁄ 4•
–
46.0
20,9
59.0
26,8
78.0
35,4
89.0
40,4
112.0
50,8
* Maximum available gap between pipe ends. Minimum gap = 0.
† Maximum Pressure and End Load are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ for other
pipe materials and/or wall thicknesses. Contact GRINNELL Mechanical Products for details.
‡ Max End Gap and Deflection is for cut grooved standard weight pipe. Values for roll grooved pipe will be half that of cut grooved.
• Only available in ANSI bolt sizes.
◗ Sizes are available to JIS standards. Contact GRINNELL Mechanical Products for details.
For information on larger sizes, European sizes or other alternative sizes, contact GRINNELL Mechanical Products.
See page 17 for coupling specifications and pages 191 - 198 for gasket information.
Refer to back cover for country-specific customer care numbers.
21
GROOVED COUPLINGS
(Page 2 of 2)
GROOVED COUPLINGS
Figure 705 Flexible Couplings
Tech Data Sheet: G110
GROOVED COUPLINGS
The GRINNELL Figure 705 Flexible Coupling allows for angular and linear
deflection, thermal expansion and contraction, and misalignments of pipe.
It is capable of pressures up to 500 psi (34,5 bar), depending on pipe
size and wall thickness. Suitable for use in a variety of applications, the
GRINNELL Figure 705 Coupling provides a dependable method of
joining pipe.
B
C
)RUDGGLWLRQDOOLVWLQJVRU
DSSURYDOVVHHSDJHRU
YLVLWRXUZHEVLWHDW
ZZZJULQQHOOFRP
A
Pipe Size
Nominal
Inches
mm
O.D.
Inches
mm
Max.†
Pressures
psi
bar
Max.†
End Load
Lbs.
kN
Max.*‡
End Gap
Inches
mm
1
25
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
8
200 ◗
10
250 ◗
12
300 ◗
1.315
33.7
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.563
141,3
6.500
165,1
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
500
34,5
500
34,5
500
34,5
500
34,5
500
34,5
500
34,5
500
34,5
500
34,5
450
31
450
31
450
31
450
31
450
31
350
24,1
350
24,1
410.0
1,86
1,082.1
4,81
1,417.6
6,30
2,215.1
9,85
3,245.9
14,43
3,534.3
15,72
4,810.6
21,39
7,952.2
35,35
10,691.2
47,56
10,937.6
48,63
14,932.4
66,36
15,512.2
68,97
26,291.8
116,89
31,766.9
141,31
44,686.7
198,78
0.13
3,3
0.13
3,3
0.13
3,3
0.13
3,3
0.13
3,3
0.13
3,3
0.13
3,3
0.25
6,4
0.25
6,4
0.25
6,4
0.25
6,4
0.25
6,4
0.25
6,4
0.25
6,4
0.25
6,4
Deflection ‡
Degrees
Per
Coupling
5° 30'
4° 19'
3° 46'
3° 1'
2° 29'
2° 23'
2° 3'
3° 11'
2° 36'
2° 35'
2° 12'
2° 10'
1° 40'
1° 20'
1° 7'
Dimensions - Inches mm
Inches/Ft
mm/m
A
B
C
1.16
96,7
0.90
75,0
0.79
65,8
0.63
52,5
0.52
43,3
0.50
41,7
0.43
35,8
0.67
55,6
0.55
45,5
0.54
45,0
0.46
38,3
0.45
37,8
0.35
29,2
0.28
23,3
0.23
19,5
2.24
56,9
2.56
65,0
2.75
69,9
3.25
82,6
3.69
93,7
4.00
101,6
4.38
111,3
5.69
144,5
6.81
173,0
6.88
174,8
7.75
196,9
7.94
201,7
10.19
258,8
12.69
322,3
14.94
379,5
3.94
100,1
4.19
106,4
4.44
112,8
4.88
124,0
5.50
139,7
5.75
146,10
6.50
165,1
7.75
196,9
9.75
247,7
9.75
247,7
10.69
271,5
10.69
271,5
13.56
344,4
16.38
416,1
18.88
479,6
1.81
46,0
1.81
46,0
1.81
46,0
1.88
47,8
1.88
47,8
1.88
47,8
1.88
47,8
2.06
52,3
2.06
52,3
2.06
52,3
2.06
52,3
2.06
52,3
2.50
63,5
2.63
66,8
2.63
66,8
Coupling Bolts
Qty.
Size
Inches
mm
3
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
⁄ 8 x 13 ⁄ 4
M10 x 44
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
–
M12 x 89
1
⁄2 x 3
M12 x 89
1
⁄2 x 3
M12 x 89
–
M16 x 83
5
⁄ 8 x 31 ⁄ 4
M16 x 83
–
M16 x 83
5
⁄ 8 x 31 ⁄ 4
M16 x 83
3
⁄4 x 43 ⁄4
M20 x 121
1 x 61 ⁄ 2
M24 x 165
1 x 61 ⁄ 2
M24 x 165
Approx.
Weight
Lbs.
kg
1.3
0,6
1.8
0,8
1.8
0,8
1.8
0,8
2.0
0,9
3.1
1,4
3.3
1,5
4.0
1,8
6.6
3,0
6.6
3,0
7.0
3,2
7.0
3,2
11.8
5,4
26.8
12,2
32.2
14,6
* Maximum available gap between pipe ends. Minimum gap = 0.
† Maximum Pressure and End Load are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ for other
pipe materials and/or wall thickness. Contact GRINNELL Mechanical Products for details.
‡ Max End Gap and Deflection is for cut grooved standard weight pipe. Values for roll grooved pipe will be half that of cut grooved.
* Maximum available gap between pipe ends. Minimum gap = 0.
◗ Sizes are available to JIS standards. Contact GRINNELL Mechanical Products for details.
For information on larger sizes, European sizes or other alternative sizes, contact GRINNELL Mechanical Products.
See page 17 for coupling specifications and pages 191 - 198 for gasket information.
22
www.grinnell.com
GROOVED COUPLINGS
Figure 770 High Pressure Rigid Couplings
Tech Data Sheet: G138
GROOVED COUPLINGS
The Figure 770 Rigid Coupling provides a rigid joint by firmly gripping
along the circumference of the pipe grooves. This coupling offers a
dependable method for joining pipe and is an economical alternative to
welding, threading, or using flanges. It is capable of pressures up to 1000
psi (68,9 bar) depending on pipe size and wall thickness.
Additional Features:
• Full 360° gripping of the groove circumference provides a
strong rigid connection.
• Tongue-and-groove design simplifies installation.
• Backed by the industry’s best 10-Year Limited Warranty.
B
C
A
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
2
2.375
50
60,3
2.875
21 ⁄ 2
65
73,0
3
3.500
80
88,9
4
4.500
100
114,3
6
6.625
150
168,3
8
8.625
200
219,1
10
10.750
250
273,0
12
12.750
300
323,9
Max.†
Pressures
psi
bar
Max.†
End Load
Lbs.
kN
Max.*‡
End Gap
Inches
mm
1000
68,9
1000
68,9
1000
68,9
1000
68,9
1000
68,9
800
55,2
800
55,2
800
55,2
4,430.1
19,71
6,491.8
28,88
9,621.1
42,79
15,904.3
70,74
34,471.6
153,33
46,741.0
207,90
72,610.1
322,97
102,141.0
454,32
0.14
3,6
0.14
3,6
0.14
3,6
0.25
6,4
0.25
6,4
0.25
6,4
0.25
6,4
0.25
6,4
Dimensions - Inches mm
A
B
C
3.53
89,7
4.06
103,1
4.78
121,4
6.01
152,7
8.51
216,2
10.93
277,6
13.46
341,9
15.52
394,2
5.72
145,3
6.00
152,4
6.76
171,7
8.50
215,9
11.25
285,8
13.75
349,3
16.00
406,4
18.00
457,2
1.88
47,8
1.88
47,8
1.88
47,8
2.10
53,3
2.10
53,3
2.60
66,0
2.60
66,0
2.60
66,0
Coupling Bolts
Size
Qty.
Inches
mm
5
⁄ 8 x 23 ⁄4
2
M16 x 70
5
⁄ 8 x 31 ⁄ 2
2
M16 x 89
5
⁄ 8 x 31 ⁄ 2
2
M16 x 89
3
⁄ 4 x 41 ⁄ 4
2
M20 x 108
7
⁄ 8 x 51 ⁄ 2
2
M22 x 140
1 x 51 ⁄ 2
2
M24 x 140
1 x 61 ⁄ 2
2
M24 x165
1 x 61 ⁄ 2
2
M24 x165
Approx.
Weight
Lbs.
kg
3.4
1,5
4.0
1,8
5.3
2,4
7.3
3,3
15.0
6,8
25.0
11,3
34.0
15,4
40.0
18,1
* Maximum available gap between pipe ends. Minimum gap = 0.
† Maximum Pressure and End Load are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ for other
pipe materials and/or wall thickness. Contact GRINNELL Mechanical Products for details.
‡ Max End Gap and Deflection is for cut grooved standard weight pipe. Values for roll grooved pipe will be half that of cut grooved.
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 17 for coupling specifications and pages 191 - 198 for gasket information.
Refer to back cover for country-specific customer care numbers.
23
GROOVED COUPLINGS
Figure 716 Flexible Reducing Couplings
Tech Data Sheet: G120
GROOVED COUPLINGS
The GRINNELL Figure 716 Flexible Reducing Coupling allows for a direct
transition between two different pipe sizes and replaces two couplings
and a reducing fitting. It is capable of pressures up to 500 psi (34,5 bar)
depending on pipe size and wall thickness. A flexible reducing coupling is
not recommended for low-temperature applications.
B
C
)RUDGGLWLRQDOOLVWLQJVRU
DSSURYDOVVHHSDJHRU
YLVLWRXUZHEVLWHDW
ZZZJULQQHOOFRP
A
Pipe Size
Nominal
Inches
mm
2 x 11 ⁄ 2
50 x 40
21 ⁄ 2 x 2
65 x 50
76.1 x 2
65 x 50
3x2
80 x 50
3 x 21 ⁄ 2
80 x 65
3 x 76,1mm
80 x 65
4x2
100 x 60
4 x 21 ⁄ 2
100 x 65
114,3 x 76,1mm
100 x 65
4x3
100 x 80
139,7mm x 4
125 x 100
5x4
125 x 100
165mm x 4
150 x 100
6x4
150 x 100
6x5
150 x 125
8x6
200 x 150
O.D.
Inches
mm
2.375 x 1.900
60,3 x 48,3
2.875 x 2.375
73,0 x 60,3
3.000 x 2.375
76,1 x 60,3
3.500 x 2.375
88,9 x 60,3
3.500 x 2.875
88,9 x 73,0
3.500 x 3.000
88,9 x 76,1
4.500 x 2.375
114,3 x 60,3
4.500 x 2.875
114,3 x 73,0
4.500 x 3.000
114,3 x 76,1
4.500 x 3.500
114,3 x 88,9
5.500 x 4.500
139,7 x 114,3
5.563 x 4.500
141,3 x 114,3
6.500 x 4.500
165,1 x 114,3
6.625 x 4.500
168,3 x 114,3
6.625 x 5.563
168,3 x 141,3
8.625 x 6.625
219,1 x 168,3
Max.†
Pressures
psi
bar
Max.†
End
Load
Lbs./kN
Max.*‡
End Gap
Inches
mm
500
34,5
500
34,5
500
34,5
500
34,5
500
34,5
500
34,5
500
34,5
500
34,5
500
34,5
500
34,5
500
34,5
500
34,5
400
27,6
400
27,6
400
27,6
400
27,6
1,417.6
6,31
2,215.1
9,85
2,215.1
9,85
2,215.1
9,85
3,245.9
14,44
3,534.3
15,72
2,215.1
9,85
3,245.9
14,44
3,534.3
15,72
4,810.6
21,40
7,952.2
35,37
7,952.2
35,37
6,361.7
28,30
6,361.7
28,30
9,722.3
43,25
13,788.6
61,33
0.13
3,3
0.13
3,3
0.13
3,3
0.13
3,3
0.13
3,3
0.13
3,3
0.19
4,8
0.19
4,8
0.19
4,8
0.19
4,8
0.25
6,4
0.25
6,4
0.25
6,4
0.25
6,4
0.25
6,4
0.25
6,4
Dimensions
Inches mm
Deflection ‡
Degrees
Inches/Ft
Per
mm/m
Coupling
0.39
1° 53'
32,9
0.32
1° 33'
27,1
0.33
1° 34'
27,3
0.27
1° 17'
22,4
0.27
1° 17'
22,4
0.27
1° 17'
22,4
0.55
2° 38'
46,0
0.55
2° 38'
46,0
0.55
2° 38'
46,0
0.55
2° 38'
46,0
0.55
2° 38'
46,0
0.44
2° 5'
36,4
0.38
1° 50'
32,0
0.36
1° 44'
30,0
0.36
1° 44'
30,0
0.26
1° 15'
21,0
Coupling Bolts
A
B
C
3.50
88,9
4.00
101,6
4.19
106,4
4.69
119,1
4.69
119,1
4.69
119,1
6.00
152,4
6.00
152,4
6.00
152,4
6.00
152,4
7.06
179,3
7.13
181,1
8.18
207,8
8.38
212,9
8.38
212,9
10.69
271,5
5.06
128,5
5.50
139,7
5.88
149,4
6.50
165,1
6.50
165,1
6.50
165,1
8.13
206,5
8.13
206,5
8.13
206,5
8.13
206,5
9.50
241,3
9.56
242,8
10.81
274,6
10.88
276,4
10.88
276,4
13.75
349,3
1.88
47,8
1.88
47,8
1.88
47,8
1.88
47,8
1.88
47,8
1.88
47,8
2.00
50,8
2.00
50,8
2.00
50,8
2.00
50,8
2.06
52,3
2.06
52,3
2.06
52,3
2.06
52,3
2.06
52,3
2.25
57,2
Qty.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Size
Inches
mm
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M120 x 57
–
M12 x 89
1
⁄2 x 3
M12 x 89
1
⁄2 x 3
M12 x 89
–
M12 x 89
5
⁄ 8 x 31 ⁄ 4
M16 x 83
5
⁄ 8 x 31 ⁄ 4
M16 x 83
–
M16 x 83
5
⁄ 8 x 31 ⁄ 4
M16 x 83
–
M20 x 121
3
⁄4 x 43 ⁄4
M20 x 121
–
M20 x 121
3
⁄4 x 43 ⁄4
M20 x 121
3
⁄4 x 43 ⁄4
M20 x 121
7
⁄ 8 x 61 ⁄ 2
M22 x 165
Approx.
Weight
Lbs.
kg
2.8
1,3
3.3
1,5
3.3
1,5
4.3
2,0
3.9
1,8
4.2
1,9
5.2
2,4
6.7
3,0
6.2
2,8
6.2
2,8
9.6
4,4
9.6
4,4
12.8
5,8
12.8
5,8
13.8
6,3
20.0
9,1
* Maximum available gap between pipe ends. Minimum gap = 0.
† Maximum Pressure and End Load are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ on other
pipe materials and/or wall thickness. Contact GRINNELL Mechanical Products for details.
‡ Max End Gap and Deflection is for cut grooved standard weight pipe. Values for roll grooved pipe will be half that of cut grooved.
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 17 for coupling specifications and pages 191 - 198 for gasket information.
24
www.grinnell.com
GROOVED COUPLINGS
Figure 780 Grooved Snap Couplings
Tech Data Sheet: G145
GROOVED COUPLINGS
The GRINNELL Figure 780 Grooved Snap Coupling is designed
for quickly connecting and disconnecting cut or rolled grooved
piping systems. It utilizes a hinged lever mechanism for quickly
joining grooved piping segments securely without nuts and bolts.
Coupling housing segments are locked in place using a split pin.
Additional Features:
• Unique two-step closing feature allows for safe and quick
installation.
• Sizes 5" to 8" (125mm to 200mm) feature a cross-ribbed
housing design for extra strength.
• Rated for pressures up to 300 psi (20,7 bar).
• Backed by the industry’s best 10-Year Limited Warranty.
B
C
A
Split Pin
Nominal
Inches
mm
O.D.
Inches
mm
Max. † *
Working
Pressure
psi
bar
11 ⁄ 2
40
2
50
21 ⁄ 2
65
76,1
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
8
200
1.900
48,3
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.565
141,3
6.500
165,1
6.625
168,3
8.625
219,1
300
20,1
300
20,1
300
20,1
300
20,1
300
20,1
300
20,1
300
20,1
300
20,1
300
20,1
300
20,1
300
20,1
Pipe Size
Max. *
End Load
Lbs.
kN
Max. End
Gap
Inches
mm
851
3,8
1,329
5,9
1,947
8,7
2,121
9,4
2,886
12,8
4,771
21,2
7,127
31,7
7,289
32,4
9,955
44,3
10,341
46,0
17,528
78,0
0.06
1,6
0.06
1,6
0.06
1,6
0.06
1,6
0.06
1,6
0.13
3,2
0.13
3,2
0.13
3,2
0.13
3,2
0.13
3,2
0.13
3,2
Dimensions - Inches mm
A
B
C
2.95
75,0
3.39
86,0
3.62
92,0
3.62
92,0
4.69
119,0
6.50
165,0
7.44
189,0
7.44
189,0
8.39
213,0
8.50
216,0
10.95
278,0
4.65
118,0
4.76
121,0
5.91
150,0
5.91
150,0
6.42
163,0
8.07
205,0
9.96
253,0
9.96
253,0
10.94
278,0
11.06
281,0
14.02
356,0
1.85
47,0
1.89
48,0
1.89
48,0
1.89
48,0
1.89
48,0
2.05
52,0
2.05
52,0
2.05
52,0
2.05
52,0
2.05
52,0
2.44
62,0
Deflection
Degrees
Per
Coupling
3° 48'
3° 31'
2° 30'
2° 24'
2° 24'
3° 12'
2° 37'
2° 36'
2° 14'
2° 10'
1° 40'
Inches/Ft
mm/m
Approx.
Weight
Lbs.
kg
0.80
66,4
0.74
61,5
0.52
43,7
0.50
41,9
0.50
41,9
0.67
55,9
0.55
45,7
0.54
45,4
0.47
39,0
0.45
37,8
0.35
29,1
2.2
1,0
2.4
1,1
3.1
1,4
3.1
1,4
4.0
1,8
5.9
2,7
10.8
4,9
10.8
4,9
12.8
5,8
12.8
5,8
20.5
9,3
† Pressure ratings listed are cold water pressure or maximum working pressure within the service temperature range of the gasket used
in the coupling.
* Maximum Working Pressures and End Loads listed are total of internal and external pressures and loads based on Schedule 40 steel pipe
grooved in accordance with Standard Cut Groove or Roll Groove Specifications.
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 17 for coupling specifications and pages 191 - 198 for gasket information.
Refer to back cover for country-specific customer care numbers.
25
GROOVED COUPLINGS
Figure 702 Mechanical Outlet Couplings
GROOVED COUPLINGS
(Page 1 of 2)
The GRINNELL Figure 702 Mechanical Outlet Coupling has the
combined features of a coupling and a reducing outlet, eliminating the
need for a mechanical tee or other associated couplings. The coupling
is available in grooved, male-threaded, or female-threaded outlets. This
design makes installation faster, safer, and more cost effective on the
job site.
Tech Data Sheet: G220
Additional features:
• Available in sizes 11 ⁄ 2" to 6" (40mm - 150mm)
• Rated for pressures up to 500 psi (34,5 bar)
• Suitable for vacuum service up to 10" HG (254mm HG)
B
C
B
B
C
C
A
T
A
Figure 702
Outlet Coupling with Female NPT Outlet
Run Pipe Size
Figure 702
Outlet Coupling with Male NPT Outlet
Branch Size
Grooved
Female ◆ Male ◆
Nominal O.D.
Thread Thread Nominal O.D.
Inches Inches
Inches
Inches Inches Inches
mm
mm
mm
mm
mm
mm
1
⁄2
–
–
–
21,3
–
–
–
3
⁄4
–
–
–
11 ⁄ 2
1.900
40
48,3
26,7
–
–
–
1
–
–
–
33,7
–
–
–
1
⁄2
–
–
–
21,3
–
–
–
3
⁄4
–
–
–
2
2.375
50
60,3
26,7
–
–
–
21 ⁄ 2
65
26
2.875
73,0
End Gap
Range
Inches
mm
0.81-0.88
20-22
0.81-0.88
20-22
0.81-0.88
20-22
0.81-0.88
20-22
0.81-0.88
20-22
Max.
Run End
Load
Lbs.
kN
1418
6,3
2215
9,9
Figure 702
Outlet Coupling with Grooved Outlet
Dimensions
Inches mm
A
B
C
T
–
–
–
–
–
–
–
–
–
–
4.50
114,3
4.50
114,3
4.50
114,3
5.00
127,0
5.00
127,0
2.75
70,0
2.75
70,0
2.75
70,0
2.75
70,0
2.75
70,0
2.06
52,0
2.06
52,0
1.94
49,0
2.32
59,0
2.32
59,0
Coupling
Bolt Size
Inches
3
⁄ 8 x 21 ⁄ 8 •
3
⁄ 8 x 21 ⁄ 8 •
Approx.
Weight
Lbs.
kg
2.6
1,2
2.6
1,2
2.9
1,3
3.1
1,4
3.1
1,4
1
1
1
1.315
0.81-0.88
3.50
5.00
2.75
2.20
3.3
33,7
1
⁄2
21,3
3
⁄4
26,7
1
33,7
–
–
–
–
33,7
–
–
–
–
–
–
11 ⁄ 4
42,4
11 ⁄ 2
48,3
25
–
–
–
–
–
–
11 ⁄ 4
32
11 ⁄ 2
40
33,7
–
–
–
–
–
–
1.660
42,4
1.900
48,3
20-22
1.25-1.50
32-38
1.25-1.50
32-38
1.25-1.50
32-38
1.25-1.50
32-38
1.25-1.50
32-38
89,0
–
–
–
–
–
–
3.70
94,0
3.70
94,0
127,0
6.33
161,0
6.33
161,0
6.33
161,0
6.33
161,0
6.33
161,0
70,0
3.25
83,0
3.25
83,0
3.25
83,0
3.25
83,0
3.25
83,0
56,0
2.20
56,0
2.56
65,0
2.44
62,0
–
–
–
–
1,5
4.8
2,2
4.6
2,1
4.4
2,2
5.1
2,3
5.9
2,4
3246
14,4
1
⁄ 2 x 23 ⁄ 8 •
www.grinnell.com
GROOVED COUPLINGS
Figure 702 Mechanical Outlet Couplings
Tech Data Sheet: G220
B
C
B
B
C
C
A
T
A
Figure 702
Outlet Coupling with Female NPT Outlet
Run Pipe Size
Nominal O.D.
Inches Inches
mm
mm
3
80
3.500
88,9
4
100
4.500
114,3
6
150
6.625
168,3
Figure 702
Outlet Coupling with Male NPT Outlet
Branch Size
Grooved
Female ◆ Male ◆
Thread Thread Nominal O.D.
Inches
Inches Inches Inches
mm
mm
mm
mm
3
⁄4
–
–
–
26,7
–
–
–
1
1
1
1.315
33,7
33,4
25
33,7
11 ⁄ 2
1.900
–
11 ⁄ 2
–
48,3
40
48,3
3
⁄4
–
–
–
End Gap
Range
Inches
mm
1.25-1.50
32-38
1.25-1.50
32-38
1.25-1.50
32-38
1.63-1.81
Max.
Run End
Load
Lbs.
kN
21.4
4811
Figure 702
Outlet Coupling with Grooved Outlet
Dimensions
Inches mm
A
B
C
T
–
–
4.00
102,0
4.00
102,0
–
6.87
175,0
6.87
175,0
6.87
175,0
8.31
3.25
83,0
3.25
83,0
3.25
83,0
3.66
2.83
72,0
2.75
70,0
–
–
3.70
26,7
–
–
–
41-46
–
211,0
93,0
94,0
1
33,7
11 ⁄ 2
48,3
–
–
–
–
1
33,7
11 ⁄ 2
48,3
–
–
–
–
11 ⁄ 2
48,3
2
60,3
–
–
–
–
11 ⁄ 2
48,3
2
60,3
–
–
11 ⁄ 2
40
2
50
–
–
–
–
11 ⁄ 2
40
2
50
–
–
1.900
48,3
2.375
60,3
–
–
–
–
1.900
48,3
2.375
60,3
1.63-1.81
41-46
1.63-1.81
41-46
1.63-1.81
41-46
1.63-1.81
41-46
1.63-1.81
41-46
1.63-1.81
41-46
1.63-1.81
41-46
–
–
4.88
124,0
4.88
124,0
–
–
–
–
6.06
154,0
6.06
154,0
8.31
211,0
8.31
211,0
8.31
211,0
10.86
276,0
10.86
276,0
10.86
276,0
10.86
276,0
3.66
93,0
3.66
93,0
3.66
93,0
3.70
94,0
3.70
94,0
3.70
94,0
3.70
94,0
3.58
91,0
3.31
84,0
–
–
–
–
4.76
121,0
4.76
121,0
–
–
35.4
7952
76.7
17,235
Coupling
Bolt Size
Inches
1
⁄2 x 3 •
Approx.
Weight
Lbs.
kg
5.9
2,4
6.2
2,8
6.4
2,9
9.2
4,2
5
1
⁄8 x 3 ⁄2 •
5
⁄ 8 x 31 ⁄ 2 •
9.5
4,3
9.5
4,3
9.9
4,5
13.2
6,0
13.2
6,0
13.6
6,2
14.3
6,5
◆ Threads are NPT. Some size outlets are available with BSP threads. Contact GRINNELL Mechanical products for details.
• Only available in ANSI bolt sizes.
Flow characteristics chart is available in technical data sheet G220.
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 17 for coupling specifications and pages 191 - 198 for gasket information.
Refer to back cover for country-specific customer care numbers.
27
GROOVED COUPLINGS
(Page 2 of 2)
GROOVED COUPLINGS
Figure 71 Flange Adapters
GROOVED COUPLINGS
(ANSI Class 125/150)
The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7
bar) depending on pipe size and wall thickness. It provides a direct transition
from flanged components to a grooved piping system. I.P.S. size flange bolt
patterns conform to ANSI Class 125 and 150.
(Page 1 of 2)
Tech Data Sheet: G150
The gasket seal is designed with an optimal amount
of rubber to provide a dependable seal and to avoid
the gasket pocket from overfilling, which may cause
assembly difficulties.
A
)RUDGGLWLRQDOOLVWLQJVRU
DSSURYDOVVHHSDJHRU
YLVLWRXUZHEVLWHDW
ZZZJULQQHOOFRP
C
F
B E D
Sizes 2" - 12" (50mm - 300mm)
Pipe Size
28
Nominal
Inches
mm
O.D.
Inches
mm
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
8
200
10
250
12
300
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.563
141,3
6.500
165,1
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
Dimensions - Inches mm
Max †
Pressure
psi
bar
Max End
Load †
Lbs.
N
A
B
C
*D
*E
F
300
20,7
300
20,7
300
20,7
300
20,7
300
20,7
300
20,7
300
20,7
300
20,7
300
20,7
300
20,7
300
20,7
300
20,7
1,324
5889
1,948
8665
2,121
9435
2,886
12,838
4,771
21,222
7,127
31,702
7,292
32,436
9,955
44,282
10,341
45,999
17,528
77,968
27,229
121,121
38,303
170,380
6.38
162,1
7.00
178,0
7.28
184,9
7.50
190,5
9.00
228,6
9.84
249,9
10.00
254,0
11.22
285,0
11.00
279,4
13.50
342,9
16.00
406,4
19.00
482,6
4.75
120,7
5.50
140,0
5.71
145,0
6.00
152,4
7.50
190,5
8.27
210,1
8.50
215,9
9.45
240,6
9.50
241,3
11.75
298,5
14.25
362,0
17.00
431,8
0.75
19,1
0.88
22,0
0.88
22,0
0.94
23,9
0.94
23,9
1.00
25,4
1.00
25,4
1.00
25,4
1.00
25,4
1.13
28,7
1.19
30,2
1.25
31,8
2.38
60,5
2.88
73,0
3.00
76,1
3.50
88,9
4.50
114,3
5.50
139,7
5.56
141,2
6.50
165,1
6.62
168,1
8.62
218,9
10.75
273,1
12.75
323,9
3.41
86,6
3.91
99,0
4.03
102,4
4.53
115,1
5.53
140,5
6.66
169,2
6.72
170,7
7.66
194,6
7.78
197,6
9.94
252,5
12.31
312,7
14.31
363,5
7.25
184,2
7.88
200,0
8.08
205,2
9.88
251,0
9.90
251,5
10.64
270,3
11.38
289,1
12.10
307,3
11.88
301,8
14.38
365,3
16.88
428,8
20.00
508,0
Recommended
Flange Mating Bolts ‡
Bolt
Size
Torque
Dia. x Lg
Qty.
Range
Inches
Lbs.-ft.
mm
Nm
5
⁄8 x 3
110-140
4
–
149-190
5
⁄8 x 3
110-140
4
–
149-190
5
⁄8 x 3
110-140
4
–
149-190
5
⁄8 x 3
110-140
4
–
149-190
5
⁄8 x 3
110-140
8
–
149-190
3
220-250
⁄ 4 x 31 ⁄ 2
8
–
298-339
3
220-250
⁄ 4 x 31 ⁄ 2
8
–
298-339
3
220-250
⁄ 4 x 31 ⁄ 2
8
–
298-339
3
220-250
⁄ 4 x 31 ⁄ 2
8
–
298-339
3
220-250
⁄ 4 x 31 ⁄ 2
8
–
298-339
7
⁄8 x 4
320-400
12
–
434-542
7
⁄8 x 4
320-400
12
–
434-542
Approx.
Wt.
Lbs
kg
4.1
1,9
5.4
2,4
5.8
2,6
6.0
2,7
8.1
3,7
9.2
4,2
9.2
4,2
11.0
5,0
10.5
4,8
16.2
7,3
20.7
9,4
31.8
14,4
www.grinnell.com
GROOVED COUPLINGS
Figure 71 Flange Adapters
A
(Page 2 of 2)
C
B
Tech Data Sheet: G150
F
E D
Segment
Bolt
Sizes 14" - 24" (350mm - 600mm)
Pipe Size
Dimensions - Inches mm
Nominal
Inches
mm
O.D.
Inches
mm
14**
350
16**
400
18**
450
20**
500
24**
600
14.000
355,6
16.000
406,4
18.000
457,2
20.000
508,0
24.000
609,6
Max †
Pressure
psi
bar
Max End
Load †
Lbs.
N
A
B
C
*D
*E
F
300
20,7
300
20,7
300
20,7
300
20,7
250
17,2
46,181
205,423
60,315
268,294
76,455
340,089
94,245
419,223
135,720
603,713
21.00
533,4
23.50
596,9
25.00
635,0
27.50
698,5
32.00
812,8
18.76
476,5
21.26
540,0
22.76
578,1
25.00
635,0
29.50
749,3
1.44
36,5
1.50
38,10
1.63
41,3
1.75
44,5
1.93
49,0
14.00
355,6
16.00
406,4
18.00
457,2
20.00
508,0
24.00
609,6
15.03
381,8
17.00
431,7
19.01
482,8
21.03
534,2
25.05
636,3
24.00
609,6
26.50
673,1
29.00
736,6
31.50
800,1
36.00
914,4
Recommended
Flange Mating Bolts ‡
Bolt
Size
Torque
Dia. x Lg
Qty.
Range
Inches
Lbs.-ft.
mm
Nm
360-520
1 x 41 ⁄4 •
12
–
488-705
1
1 x 4 ⁄4 •
360-520
16
–
488-705
11 ⁄ 8 x 4 3 ⁄ 4 •
450-725
16
–
610-982
450-725
11 ⁄ 8 x 4 3 ⁄ 4 •
20
–
610-982
11 ⁄ 4 x 51 ⁄ 2 •
620-1000
20
–
841-1356
Approx.
Wt.
Lbs
kg
46.7
21,2
59.0
26,8
62.5
28,3
73.3
33,2
100.6
45,6
*
**
•
†
Dimensions D and E represent minimum and maximum sealing surfaces.
For segment bolt torque recommendations, refer to Table A below.
Metric segment bolt are available upon request.
Maximum Pressure and End Load are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ on other
pipe materials and/or wall thickness. Contact GRINNELL Mechanical Products for details.
‡ Mating bolts and nuts are not supplied. Flange mating bolts must be at least SAE J429, Grade 5 or stronger. Bolt lengths are standard; responsibility
lies with the purchaser to verify the correct length for the intended application.
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 17 for coupling specifications and pages 191 - 198 for gasket information.
See page 33 for Flange Adapter Washers and page 226 Flange Drilling Specifications.
TABLE A
SEGMENT BOLT TORQUE
Pipe Size
Nominal
Inches
mm
O.D.
Inches
mm
14
350
16
400
18
450
20
500
24
600
14.000
355,6
16.000
406,4
18.000
457,2
20.000
508,0
24.000
609,6
Segment Bolts
Size - Dia. x Lg
Inches
mm
Bolt Torque Range
Lbs.-ft.
Nm
5
⁄ 8 x 43 ⁄ 4
–
100-130
149-190
3
⁄ 4 x 43 ⁄ 4
–
130-180
176-244
Refer to back cover for country-specific customer care numbers.
29
GROOVED COUPLINGS
(ANSI Class 125/150)
GROOVED COUPLINGS
Figure 71 Flange Adapters
GROOVED COUPLINGS
(PN10/PN16)
The Figure 71 Flange Adapter is capable of pressures up to 300 psi
(20,7 bar) depending on pipe size and wall thickness. It provides a direct
transition from flanged components to a grooved piping system. I.P.S. size
flange bolt patterns conform to PN10/PN16
(Page 1 of 2)
Tech Data Sheet: G150
The gasket seal is designed with an optimal amount
of rubber to provide a dependable seal and to avoid
the gasket pocket from overfilling, which may cause
assembly difficulties.
A
)RUDGGLWLRQDOOLVWLQJVRU
DSSURYDOVVHHSDJHRU
YLVLWRXUZHEVLWHDW
ZZZJULQQHOOFRP
C
F
B E D
Sizes 2" - 12" (50mm - 300mm)
Pipe Size
30
Nominal
Inches
mm
O.D.
Inches
mm
2
50
21 ⁄ 2
65
76,1mm
65**
76,1mm
65**
3**
80
3**
80
4**
100
4**
100
139,7mm
125**
139,7mm
125**
165,1mm
150**
165,1mm
150**
6
150
2.375
60,3
2.875
73,0
3.000
76,1
3.000
76,1
3.500
88,9
3.500
88,9
4.500
114,3
4.500
114,3
5.500
139,7
5.500
139,7
6.500
165,1
6.500
165,1
6.625
168,3
PN10/
PN16
PN10 / PN16
PN10 / PN16
PN10
PN16
PN10
PN16
PN10
PN16
PN10
PN16
PN10
PN16
PN10 / PN16
Max †
End
Load
Lbs.
N
1,324
5889
1,948
8665
1,948
8665
1,948
8665
2,886
12,838
2,886
12,838
4,771
21,222
4,771
21,222
7,292
32,436
7,127
31,702
9,955
44,282
9,955
44,282
17,528
77,968
Recommended
Flange Mating Bolts ‡
Dimensions - Inches mm
A
B
C
*D
*E
F
Size
Dia. x Lg
Inches
mm
6.38
162,1
7.00
177,8
7.28
184,9
7.28
184,9
7.26
184,4
7.88
200,2
8.50
215,9
8.66
219,9
9.84
249,9
9.84
249,9
11.00
279,4
11.22
285,0
11.00
279,4
4.92
125,0
5.50
139,7
5.71
145,0
5.70
144,8
5.76
146,3
6.30
160,0
7.00
177,8
7.09
180,1
8.27
210,1
8.26
209,8
9.26
234,2
9.46
240,3
9.49
241,1
0.75
19,1
0.88
22,4
0.88
22,4
0.88
22,4
0.94
23,9
0.94
23,9
0.94
23,9
0.94
23,9
1.00
25,4
1.00
24,5
1.00
24,5
1.00
24,5
1.00
25,4
2.38
60,5
2.88
73,6
3.00
76,1
3.00
76,1
3.50
88,9
3.50
88,9
4.50
114,3
4.50
114,3
5.50
139,7
5.50
139,7
6.50
165,1
6.50
165,1
6.62
168,1
3.41
86,6
3.91
99,3
4.03
102,4
4.03
102,4
4.53
115,1
4.53
115,1
5.53
140,5
5.53
140,5
6.53
165,9
6.66
169,2
7.66
194,6
7.66
194,6
7.78
197,6
7.25
184,2
5.13
130,3
8.09
205,5
8.08
205,2
7.86
199,6
8.76
222,5
9.26
235,2
9.43
239,5
10.69
271,5
12.22
310,4
11.76
298,7
12.10
307,3
11.88
301,8
–
M16 x 76
–
M16 x 76
–
M16 x 76
–
M16 x 76
–
M16 x 76
–
M16 x 76
–
M16 x 76
–
M16 x 76
–
M16 x 89
–
M16 x 89
–
M20 x 89
–
M20 x 89
–
M20 x 89
Qty.
4
4
4
4
4
8
8
8
8
8
8
8
8
Bolt
Torque
Range
Nm
110-140
149-190
110-140
149-190
110-140
149-190
110-140
149-190
110-140
149-190
110-140
149-190
110-140
149-190
110-140
149-190
110-140
149-190
110-140
149-190
220-250
298-339
220-250
298-339
220-250
298-339
Approx.
Wt.
Lbs
kg
4.0
1,8
5.4
2,4
5.7
2,6
5.6
2,5
5.4
2,4
5.6
2,5
7.8
3,5
8.0
3,6
9.2
4,2
9.2
4,2
10.4
4,7
10.5
4,8
10.6
4,8
www.grinnell.com
GROOVED COUPLINGS
Figure 71 Flange Adapters
(Page 2 of 2)
Tech Data Sheet: G150
A
C
F
B E D
Sizes 2" - 12" (50mm - 300mm)
Pipe Size
Nominal
Inches
mm
O.D.
Inches
mm
8**
200
8**
200
10**
250
10**
250
12**
300
12**
300
8.625
219,1
8.625
219,1
10.750
273,0
10.750
273,0
12.750
323,9
12.750
323,9
PN10/
PN16
PN10
PN16
PN10
PN16
PN10
PN16
Max †
End
Load
Lbs.
N
17,528
77,968
17,528
77,968
27,229
121,121
38,303
170,380
38,303
170,380
38,303
170,380
Recommended
Flange Mating Bolts ‡
Dimensions - Inches mm
A
B
C
*D
*E
F
Size
Dia. x Lg
Inches
mm
13.26
336,8
13.38
339,8
15.56
395,2
16.00
406,4
17.52
445,0
18.12
460,2
11.50
292,1
11.62
295,1
13.78
350,0
13.98
355,1
15.74
399,8
16.14
410,0
1.125
28,6
1.125
28,6
1.188
30,2
1.188
30,2
1.25
31,8
1.25
31,8
8.62
218,9
8.62
218,9
10.75
273,1
10.75
273,1
12.75
323,9
12.75
323,9
9.94
254,5
9.94
254,5
12.31
312,4
12.31
312,7
14.31
363,5
14.31
363,5
14.12
358,6
14.28
362,7
16.50
419,1
16.88
428,8
18.52
470,4
19.14
486,2
–
M20 x 89
–
M20 x 89
–
M20 x 102
–
M22 x 102
–
M22 x 102
–
M22 x 102
Qty.
8
12
12
12
12
12
Bolt
Torque
Range
Nm
220-250
298-339
220-250
298-339
220-250
298-339
320-400
434-542
320-400
434-542
320-400
434-542
Approx.
Wt.
Lbs
kg
15.4
6,9
16.6
7,5
21.2
9,6
22.5
10,2
24.8
11,2
28.9
13,1
Maximum Pressure rating is 300 psi (20,7 bar).
* Dimensions D and E represent minimum and maximum sealing surfaces.
** For noted sizes, PN10 and PN16 dimensional values differ.
† Maximum End Load is total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ on other pipe materials
and/or wall thickness. Contact GRINNELL Mechanical Products for details.
‡ Mating Bolts and Nuts are not supplied. Flange Mating Bolts must be at least SAE J429, Grade 5 or stronger. Bolt lengths are standard;
responsibility lies with the purchaser to verify the correct length for the intended application.
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 17 for coupling specifications and pages 191 - 198 for gasket information.
See page 33 for Flange Adapter Washers and page 226 Flange Drilling Specifications.
Refer to back cover for country-specific customer care numbers.
31
GROOVED COUPLINGS
(PN10/PN16)
GROOVED COUPLINGS
Figure 71 Flange Adapters
GROOVED COUPLINGS
(AS2129 Table E)
The Figure 71 Flange Adapter is capable of pressures up to 300 psi
(20,7 bar) depending on pipe size and wall thickness. It provides a direct
transition from flanged components to a grooved piping system. I.P.S. size
flange bolt patterns conform to AS2129 Table E.
Tech Data Sheet: G150
The gasket seal is designed with an optimal amount
of rubber to provide a dependable seal and to avoid
the gasket pocket from overfilling, which may cause
assembly difficulties.
A
)RUDGGLWLRQDOOLVWLQJVRU
DSSURYDOVVHHSDJHRU
YLVLWRXUZHEVLWHDW
ZZZJULQQHOOFRP
C
F
B E D
Sizes 3" - 8" (80mm - 200mm)
Pipe Size
Nominal
Inches
mm
O.D.
Inches
mm
Max †
End
Load
Lbs.
N
3
80
4
100
6
150
8
200
3.500
88,9
4.500
114,3
6.625
168,3
8.625
219,1
2,886
12,838
4,771
21,222
10,341
45,999
27,229
121,121
Dimensions - Inches mm
A
B
C
*D
*E
F
7.88
200,2
9.00
228,6
11.25
285,8
13.38
339,9
6.30
160,0
7.09
180,1
9.45
240,0
11.61
294,9
0.94
23,9
0.94
23,9
1.00
25,4
1.13
28,7
3.50
88,9
4.50
114,3
6.50
165,1
8.62
218,9
4.53
115,1
5.53
140,5
7.53
191,3
9.94
252,5
8.75
222,3
9.90
251,5
12.12
307,8
14.31
363,5
Recommended
Flange Mating Bolts ‡
Size
Bolt
Dia. x Lg
Torque
Qty.
Inches
Range
mm
Nm
–
–
8
M16 x 76
149-190
–
–
8
M16 x 76
149-190
–
–
8
M20 x 89
298-339
–
–
12
M20 x 89
298-339
Approx.
Wt.
Lbs
kg
6.4
2,9
7.7
3,5
10.6
4,8
15.0
6,8
* Dimensions D and E represent minimum and maximum sealing surfaces.
† Maximum End Load is total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ on other pipe materials
and/or wall thickness. Contact GRINNELL Mechanical Products for details.
‡ Mating Bolts and Nuts are not supplied. Flange Mating Bolts must be at least SAE J429, Grade 5 or stronger. Bolt lengths are standard; responsibility
lies with the purchaser to verify the correct length for the intended application.
Maximum Pressure rating is 300 psi (20,7 bar).
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 17 for coupling specifications and pages 191 - 198 for gasket information.
See page 33 for Flange Adapter Washers and page 226 Flange Drilling Specifications.
32
www.grinnell.com
GROOVED COUPLINGS
Flange Adapter Washers
• Rubber surfaces
• Adapting to AWWA cast flanges
• Rubber faced wafer valves
• Serrated flange surfaces
Contact GRINNELL Mechanical Products for additional
information.
Mating Flange
Component
GRINNELL
Flange Adapter
Grooved Pipe
GROOVED COUPLINGS
Carbon steel Flange Adapter Washers are required when
the Figure 61 and Figure 71 Flange Adapter is used against
surfaces such as:
Gasket
Flange Adapter Washer
MATERIAL SPECIFICATIONS
• Cold rolled steel sheet per ASTM A 1008-00 CS
Types A, B, or C
• Zinc Electrodeposited coating per ASTM B 633-07
SC2 Type III
Pipe Size
Nominal
Inches
mm
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
8
200
B A
Pipe Size
Dimensions - Inches mm
O.D.
Inches
mm
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.563
141,3
6.500
165,1
6.625
168,3
8.625
219,1
A
B
3.94
100,1
4.69
119,1
4.89
124,2
5.19
131,8
6.69
169,9
7.45
189,2
7.56
192,0
8.47
215,1
8.56
217,4
10.81
274,6
2.25
57,2
2.75
69,9
2.88
73,2
3.38
85,9
4.38
111,3
5.32
135,1
5.38
136,7
6.32
160,5
6.44
163,6
8.44
214,4
Nominal
Inches
mm
10
250
12
300
14
350
16
400
18
450
20
500
24
600
Dimensions - Inches mm
O.D.
Inches
mm
10.750
273,0
12.750
323,9
14.000
355,6
16.000
406,4
18.000
457,2
20.000
508,0
24.000
609,6
A
B
13.19
335,0
15.94
404,9
17.50
444,5
20.00
508,0
21.38
542,9
23.63
600,1
28.00
711,2
10.50
266,7
12.50
317,5
13.50
342,9
15.50
393,7
17.50
444,5
19.50
495,3
23.50
596,9
For information on additional sizes, PN10, PN16, and AS2129 Table E
sizes, contact GRINNELL Mechanical Products.
Available in stainless steel ASTM A 666 Type 304-2B. Contact
GRINNELL Mechanical Products.
See Flange Drilling Specifications on page 226.
Refer to back cover for country-specific customer care numbers.
33
GROOVED COUPLINGS
GROOVED COUPLINGS
Coupling Installation Information
Tech Data Sheet: G900
Installation Handbook: IH-1000M
These installation instructions do not take the place of nor
do they eliminate the need for the installer to fully read and
understand the complete GRINNELL Mechanical Products
Installation Handbook (refer to IH-1000M). Always review the
GRINNELL Mechanical Products Installation Handbook and
individual product tech data sheets for the latest instructions,
techniques, and care and maintenance information. This
document does not supersede or replace the GRINNELL
Mechanical Products Installation Handbook or individual
product tech data sheets. Current documentation can be
obtained by contacting GRINNELL Mechanical Products or
visiting www.grinnell.com.
Bolt Torque
Bolt Size
ANSI
Inches
Bolt Torque
Range
Ft.- Lbs.
Bolt Size
Metric
Bolt Torque
Range
Nm
3
⁄8
30-40
M10
40-60
1
⁄2
90-110
M12
120-150
5
⁄8
100-130
M16
135-175
3
⁄4
150-200
M20
200-270
7
⁄8
180-220
M22
245-300
1
200-250
M24
270-340
11 ⁄ 8
225-275
WARNING
Failure to follow these instructions may result in improper product installation, joint failure or leakage, serious personal injury,
and/or property damage.
The following instructions should be used as a guideline for the
proper installation of GRINNELL Grooved Products.
1. Always read and understand the instructions.
2. To avoid serious personal injury always wear appropriate
personal protective equipment (ppe), such as safety glasses, hard hat and foot protection.
3. Never remove any piping component without verifying that
the system is de-pressurized and drained. Failure to due so
may result in serious personal injury.
4. Ensure that the supplied gasket is suitable for the intended
application. To prevent deterioration of the gasket material,
a petroleum lubricant should never be used. Use a recommended lubricant to install the gasket.
5. The pipe groove dimensions must be in accordance with
Standard Roll Groove or Cut Groove Specifications. Refer
to Pages 201 to 203 or Tech Data Sheet G710 for additional information.
6. Ensure that the coupling keys are engaged in the grooves.
7. Always tighten nuts evenly by alternating sides. Uneven
tightening can cause the gasket to pinch or bind. If a gasket
becomes pinched, replace it immediately.
8. Torque values are supplied as a guideline and may be used
when setting the torque on power impact wrenches. Always
refer to the power impact wrench manufacturer’s instructions for settings.
9. Exceeding the suggested torque values may cause damage
to the coupling and/or result in pipe-joint failure. Minimum
bolt torque is required for coupling to meet the published
performance parameters.
10. Always inspect each joint to ensure that the coupling is
properly installed.
EDPM, Tri-Seal gaskets are recommended for freezer
applications. Reducing Couplings are not recommended for
freezer applications. For dry pipe and freezer applications,
use the Tri-Seal freezer gasket with a petroleum-free silicone
lubricant. Standard lube is not recommended for this
application as it freezes and can cause leakage.
ASME Standard Note
*Note: The samples that were tested contained the GRINNELL
Figure 707 high pressure flexible couplings, and the
GRINNELL Figure 260 end caps of the appropriate size.
These were used on the assembly to test system components as
related in a field environment. The rated or working pressure
of these items is 1,000 psi (68.9 bar)
*Note: The material of both the fittings and couplings used in
this testing is found on page nine of the GRINNELL Mechanical
Handbook. This material is Ductile Iron Casting Grade 65-4512, which has an elongation in 2” (51mm) of 12%.
34
The Component Proof Test in ASME A17.1 – 2004,
section 3.19.1.3 requires testing to section 8.2.8.5, or five
times the rated pressure.
The calculation of the factor of safety located in section
8.2.8.5 would then be calculated as F = (5.04 / 12 – 2.8)
+ 2.7. This then, according to section 8.2.8.5, would be
a requirement safety factor of 3.25. The minimum pressure
requirement of these components then would be 3,250 psig
(224.1 bar)
www.grinnell.com
35
GROOVED FITTINGS
Grooved Fittings Table of Contents
GROOVED FITTINGS
Figure 210
90° Elbows
Page 38
Figures 210LR &
310LR
90° Long Radius
Elbows
Page 38
Figure 201
45° Elbows
Page 39
Figures 201LR &
301LR
45° Long Radius
Elbows
Page 39
Figures 212 &
312
221⁄2° Elbows
Page 40
Figures 211 &
311
111⁄4° Elbows
Page 41
Figure 315
Groove x Male Thread
90° Elbows
Page 42
Figure 316
Reducing Base
Support Elbows
Page 42
Figures 3D, 5D
& 6D
111⁄4° to 90°
Long Radius Elbows
Pages 43 - 45
Figure 219 & 319
Tees
Page 46
36
Figure 320
Tees Groove x Groove
x Male Thread
Page 47
Figures 221 &
321
Reducing Tees
Pages 48 - 50
Figure 323
Reducing Tees Groove
x Groove x Thread
Figure 324
True Wyes
Page 63
Figure 314
45° Laterals
Page 64
Pages 51 - 52
Figures 250 &
350
Concentric
Reducers
Figure 325
45° Reducing
Laterals
Pages 53 - 55
Pages 65 - 67
Figures 251 &
351
Eccentric Reducers
Pages 56 - 58
Figure 372
Groove x Male Thread
Concentric Reducers
Page 59
Figure 395
Hose Adapter Nipples
Page 60
Figure 380
Female Thread
Adapters
Page 60
Figures 391, 392
& 393
Adapter Nipples
Page 61
Figures 397, 398
& 399
Concentric Swaged
Nipples
Page 62
Figure 330
Tee Wyes
Pages 68 - 69
Figure 331
Reducing Tee Wyes
Page 70
Figures 227 &
327
Crosses
Page 71
Figures 260 &
360
End Caps
Page 72
Figures 341, 342,
343, & 344
Flange Adapters
Pages 73 - 74
www.grinnell.com
GROOVED FITTINGS
Fittings Specifications
GRINNELL Grooved Fittings in ductile iron and fabricated
steel provide an economical and efficient method of changing
direction, adding an outlet, and reducing or capping piping
systems.
Tech Data Sheet: G180
GROOVED FITTINGS
GRINNELL Grooved Fittings are rated at the pressure rating of
the coupling in use.
Fitting Friction Resistance Chart
MATERIAL SPECIFICATIONS
Ductile Iron Fitting Specifications
• ASTM A 536 - Standard specification for
ductile iron castings, Grade 65-45-12
• Tensile Strength, minimum 65,000 psi (4481,6 bar)
• Yield Strength, minimum 45,000 psi (3102,6 bar)
• Elongation in 2" (50mm), minimum 12%
• ASTM A 153 – Standard specification for hot-dip
galvanizing
Fabricated Steel Fitting
Specifications
• Carbon Steel: According to ASTM A 53, Grade B
• Tensile Strength, minimum 60,000 psi (4136,9 bar)
• Yield Strength, minimum 35,000 psi (2413,2 bar)
• Sizes 11 ⁄ 4" – 10" (32mm – 250mm) Schedule 40
• Sizes 12" – 24" (300mm – 600mm) STD (.375)
Coatings
• Orange – Non-lead paint (standard)
• Red – Non-lead paint (optional, regional)
• Hot-Dipped, Zinc Galvanized (optional)
Threads
• NPT (standard)
• BSPT (optional, regional)
)RUDGGLWLRQDOOLVWLQJVRU
DSSURYDOVVHHSDJHRU
YLVLWRXUZHEVLWHDW
ZZZJULQQHOOFRP
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
1
1.315
25
33,4
1.660
11 ⁄ 4
32
42,4
11 ⁄ 2
1.900
40
48,3
2
2.375
50
60,3
21 ⁄ 2
2.875
65
73,0
76,1mm
3.000
65
76,1
3
3.500
80
88,9
4
4.500
100
114,3
139,7mm
5.500
125
139,7
5
5.563
125
141,3
165,1mm
6.500
150
165,1
6
6.625
150
168,3
8
8.625
200
219,1
10
10.750
250
273,0
12
12.750
300
323,9
14
14.000
350
355,6
16
16.000
400
406,4
18
18.000
450
457,2
20
20.000
500
508,0
24
24.000
600
609,6
Elbows
90°
Feet
m
Elbows
45°
Feet
m
Tee
Branch
Feet
m
Tee
Run
Feet
m
1.6
0,5
1.9
0,6
2.3
0,7
3.2
1,0
3.9
1,2
4.1
1,2
4.9
1,5
6.5
2,0
8.0
2,4
8.2
2,5
9.5
2,9
9.9
3,0
13.1
4,0
16.5
5,0
19.9
6,1
23.0
7,0
25.9
7,9
28.9
8,8
33.1
10,1
40.0
12,2
0.7
0,2
1.0
0,3
1.2
0,4
1.6
0,5
2.0
0,6
2.1
0,6
2.4
0,7
3.3
1,0
4.1
1,3
4.1
1,3
4.8
1,4
5.0
1,5
6.6
2,0
8.3
2,5
9.9
3,0
18.0
5,5
20.0
6,1
23.0
7,0
25.9
7,9
29.9
9,1
4.3
1,3
4.8
1,5
5.8
1,8
8.0
2,5
9.8
3,0
10.3
3,1
12.2
3,7
16.3
5,0
20.0
6,1
20.5
6,3
23.8
7,2
24.8
7,6
32.8
10,0
41.3
12,6
49.7
15,1
67.9
20,7
78.1
23,8
85.0
25,9
100.1
30,5
115.2
35,1
1.6
0,5
1.9
0,6
2.3
0,7
3.2
1,0
3.9
1,2
4.1
1,2
4.9
1,5
6.5
2,0
8.0
2,4
8.2
2,5
9.5
2,9
9.9
3,0
13.1
4,0
16.5
5,0
19.9
6,1
23.0
7,0
25.9
7,9
28.9
8,8
33.1
10,1
40.0
12,2
For reducing tee branches, use value corresponding to the branch size.
For example, for a 8" x 8" x 2" (200mm x 200mm x 50mm) tee,
use a branch value of 2" (50mm) is 8.0' (2,5m).
For sizes not listed, interpolate from the values shown.
Expressed as Equivalent Straight Pipe.
Refer to back cover for country-specific customer care numbers.
37
GROOVED FITTINGS
Figure 210 90° Cast Elbows
Tech Data Sheet: G180
Figures 210LR & 310LR
90° Long Radius Elbows
Tech Data Sheet: G180
GROOVED FITTINGS
Figure 310LR
90° Fabricated Elbow
(Shown)
C to E
Pipe Size
Nominal
Inches
mm
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
8
200 ◗
10
250 ◗
12
300 ◗
O.D.
Inches
mm
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.563
141,3
6.500
165,1
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
C to E
Inches
mm
Approx.
Weight
Lbs.
kg
2.75
69,9
2.75
69,9
3.25
82,6
3.75
95,3
3.75
95,3
4.25
108,0
5.00
127,0
5.50
139,7
5.50
139,7
6.50
165,1
6.50
165,1
7.75
196,9
9.00
228,6
10.00
254,0
1.0
0,5
1.3
0,6
1.8
0,8
3.1
1,4
3.2
1,5
4.8
2,2
7.5
3,4
11.3
5,1
11.6
5,3
16.9
7,7
16.6
7,5
29.6
13,4
48.5
22,0
66.4
30,1
◗ Sizes are available to JIS standards. Contact GRINNELL Mechanical
Products for details.
For information on larger sizes, European sizes or other alternative
sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
C to E
Pipe Size
Nominal
Inches
mm
O.D.
Inches
mm
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
8
200
10
250
12
300
14
350
16
400
18
450
20
500
24
600
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.563
141,3
6.500
165,1
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
14.000
355,6
16.000
406,4
18.000
457,2
20.000
508,0
24.000
609,6
Figure 210LR Cast
Approx.
C to E
Weight
Inches
Lbs.
mm
kg
4.38
2.4
111,3
1,1
5.00
5.1
127,0
2,3
5.00
4.4
127,0
2,0
5.88
6.6
149,4
3,0
7.50
11.6
190,5
5,3
9.50
19.0
241,3
8,6
9.50
20.0
241,3
9,1
10.75
26.4
273,1
12,0
10.75
29.5
273,1
13,4
14.25
62.1
362,0
28,2
–
–
–
–
–
–
–
–
21.00
131.0
533,4
59,4
24.00
180.0
609,6
81,6
–
–
–
–
–
–
–
–
–
–
–
–
Figure 310LR Fabricated
Approx.
C to E
Weight
Inches
Lbs.
mm
kg
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
18.00
103.7
457,2
47,0
21.00
147.8
533,4
67,0
21.00
155.0
533,4
70,3
24.00
206.0
609,6
93,4
27.00
262.0
685,8
118,8
33.00
324.0
838,2
147,0
36.00
466.0
914,4
211,4
For information on larger sizes, European sizes or other alternative
sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
38
www.grinnell.com
GROOVED FITTINGS
Figure 201 45° Cast Elbows
Figures 201LR & 301LR
45° Long Radius Elbows
Tech Data Sheet: G180
GROOVED FITTINGS
Tech Data Sheet: G180
C to E
Figure 301LR
45° Fabricated Elbow
(Shown)
C to E
Pipe Size
Nominal
Inches
mm
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
8
200 ◗
10
250 ◗
12
300 ◗
O.D.
Inches
mm
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.563
141,3
6.500
165,1
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
C to E
Inches
mm
Approx.
Weight
Lbs.
kg
1.75
44,5
1.75
44,5
2.00
50,8
2.25
57,2
2.25
57,2
2.50
63,5
3.00
76,2
3.25
82,6
3.25
82,6
3.50
88,9
3.50
88,9
4.25
108,0
4.75
120,7
5.25
133,4
0.8
0,4
0.9
0,4
1.3
0,6
2.1
1,0
2.2
1,0
3.5
1,6
5.5
2,5
7.7
3,5
8.1
3,7
11.0
5,0
11.2
5,1
19.0
8,6
28.0
12,7
48.0
22,0
◗ Sizes are available to JIS standards. Contact GRINNELL Mechanical
Products for details.
For information on larger sizes, European sizes or other alternative
sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
Pipe Size
Nominal
Inches
mm
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
8
200
10
250
12
300
14
350
16
400
18
450
20
500
24
600
O.D.
Inches
mm
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.563
141,3
6.500
165,1
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
14.000
355,6
16.000
406,4
18.000
457,2
20.000
508,0
24.000
609,6
Figure 201LR Cast
C to E
Approx.
Inches
Weight
mm
Lbs. kg
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
8.75
60.0
228,3
27,2
10.00
97.0
254,0
44,0
–
–
–
–
–
–
–
–
–
–
–
–
Figure 301LR Fabricated
C to E
Approx.
Inches
Weight
mm
Lbs. kg
2.50
1.1
63,5
0,5
2.50
1.3
63,5
0,6
2.75
1.8
69,9
0,8
3.00
2.9
76,2
1,3
3.00
3.1
76,2
1,4
3.38
4.6
85,9
2,1
4.00
7.5
101,6
3,4
5.00
12.5
127,0
5,7
5.00
12.5
127,0
5,7
5.50
12.0
139,7
5,4
5.50
12.0
139,7
5,4
7.25
34.0
184,2
15,4
8.50
56.0
215,9
25,4
10.00
98.0
254,0
44,5
–
–
–
–
–
–
–
–
11.25
145.0
285,8
65,8
12.50
180.0
317,5
81,6
15.00
250.0
381,0
133,4
For information on larger sizes, European sizes or other alternative
sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
Refer to back cover for country-specific customer care numbers.
39
GROOVED FITTINGS
Figures 212 & 312
221⁄2° Elbows
GROOVED FITTINGS
Tech Data Sheet: G180
Figure 212
221⁄2° Cast Elbow
Pipe Size
C to E
Figure 312
221⁄2° Fabricated Elbow
C to E
Nominal
Inches
mm
O.D.
Inches
mm
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
8
200
10
250
12
300
14
350
16
400
18
450
20
500
24
600
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.563
141,3
6.500
165,1
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
14.000
355,6
16.000
406,4
18.000
457,2
20.000
508,0
24.000
609,6
Figure 212 - Cast
Approx.
C to E
Weight
Inches
Lbs.
mm
kg
1.75
0.8
44,5
0,4
1.75
1.0
44,5
0,5
1.88
1.3
47,8
0,6
2.00
1.9
50,8
0,9
2.00
2.0
50,8
0,9
2.25
2.9
57,2
1,3
2.63
4.7
66,8
2,1
2.88
6.9
73,2
3,1
2.88
6.9
73,2
3,1
–
–
–
–
3.13
9.4
79,5
4,3
3.88
16.9
98,6
7,7
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Figure 312 - Fabricated
Approx.
C to E
Weight
Inches
Lbs.
mm
kg
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
3.13
9.4
79,5
4,3
–
–
–
–
–
–
–
–
4.38
14.0
111,3
6,4
4.88
22.0
124,0
10,0
5.00
46.0
127,0
20,9
5.00
52.2
127,0
23,7
5.50
65.0
139,7
29,5
6.00
80.0
152,4
36,3
7.00
112.0
177,8
50,8
For information on larger sizes, European sizes or other alternative sizes,
contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
40
www.grinnell.com
GROOVED FITTINGS
Figures 211 & 311
111⁄4° Elbows
Pipe Size
Figure 211 - Cast
Approx.
C to E
Weight
Inches
Lbs.
mm
kg
1.38
0.7
35,1
0,3
1.38
0.8
35,1
0,4
1.38
1.1
35,1
0,5
1.50
1.6
38,1
0,7
1.50
1.7
38,1
0,7
1.50
2.2
38,1
1,0
1.75
3.4
44,5
1,5
2.00
5.1
50,8
2,3
2.00
5.2
50,8
2,4
2.00
6.4
50,8
2,9
2.00
6.5
50,8
2,9
2.00
9.2
50,8
4,2
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Figure 311 - Fabricated
Approx.
C to E
Weight
Inches
Lbs.
mm
kg
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2.13
9.1
54,1
4,1
2.25
16.7
57,2
7,6
3.50
32.1
88,9
14,6
4.00
42.0
101,6
19,1
4.50
53.2
114,3
24,2
5.00
65.7
127,0
29,8
Nominal
Inches
mm
O.D.
Inches
mm
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
8
200
10
250
12
300
14
350
16
400
18
450
20
500
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.563
141,3
6.500
165,1
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
14.000
355,6
16.000
406,4
18.000
457,2
20.000
508,0
24
24.000
–
–
6.00
96.0
600
609,6
–
–
152,4
43,5
GROOVED FITTINGS
Tech Data Sheet: G180
Figure 211
111⁄4° Cast Elbow
C to E
Figure 311
111⁄4° Fabricated Elbow
C to E
For information on larger sizes, European sizes or other alternative sizes, contact
GRINNELL Mechanical Products.
See page 37 for fitting specifications.
Refer to back cover for country-specific customer care numbers.
41
GROOVED FITTINGS
Figure 315 90° Elbows
(Groove x Male Thread)
Tech Data Sheet: G180
GROOVED FITTINGS
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
11 ⁄ 4
1.660
32
42,4
1.900
11 ⁄ 2
40
48,3
2
2.375
50
60,3
21 ⁄ 2
2.875
60
73,0
3
3.500
80
88,9
4
4.500
100
114,3
6
6.625
150
168,3
C to TE
C to GE
Inches
mm
C to TE
Inches
mm
Approx.
Weight
Lbs.
kg
2.75
69,9
2.75
69,9
3.25
82,6
3.75
95,3
4.25
108,0
5.00
127,0
6.50
165,1
2.75
69,9
2.75
69,9
4.25
108,0
3.75
95,3
6.00
152,4
7.25
184,2
6.50
165,1
0.9
0,4
1.2
0,5
2.0
0,9
3.1
1,4
5.7
2,6
9.8
4,4
17.6
8,0
Note: Available with BSP and NPT type threads.
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
C to GE
Figure 316 Reducing Base Support Elbow
(Groove x Flange)
Tech Data Sheet: G180
C to E
C to E
H
B
42
Pipe Size
Grooved End Flanged End
Nominal
O.D.
O.D.
Inches
Inches
Inches
mm
mm
mm
6x4
6.625
4.500
150 x 100
168,3
114,3
6x5
6.625
5.563
150 x 125
168,3
141,3
8x5
8.625
5.563
200 x 125
219,1
141,3
8x6
8.625
6.625
200 x 150
219,1
168,3
10 x 6
10.750
6.625
250 x 150
273,1
168,3
10 x 8
10.750
8.625
250 x 200
273,1
219,1
12 x 8
12.750
8.625
300 x 200
323,9
219,1
12 x 10
12.750
10.750
300 x 250
323,9
273,1
C to E
Inches
mm
H
Inches
mm
B Dia.
NPSC
Threaded
Inches
mm
Approx.
Wt. Ea.
Lbs
Kg
12.0
304,8
12.5
317,5
15.5
393,7
15.5
393,7
18.5
469,9
19.0
482,6
22.0
558,8
22.0
558,8
2.5
63,5
2.5
63,5
3.0
76,2
3.0
76,2
3.5
88,9
3.5
88,9
4.0
101,6
4.0
101,6
1.5
38,1
1.5
38,1
1.5
38,1
1.5
38,1
1.5
38,1
1.5
38,1
1.5
38,1
1.5
38,1
38.5
17,5
45.4
20,6
65.5
29,7
73.0
33,1
100.0
45,4
126.5
57,4
155.0
70,3
186.0
84,4
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
www.grinnell.com
GROOVED FITTINGS
Long Radius 3D Elbows
Tech Data Sheet: G180
C to E
C to E
C to E
C to E
C to E
R = 3D
Pipe Size
R = 3D
Figure 310-3D
(90°)
Figure 306-3D
(60°)
310-3D
90° Elbow
Approx
C to E
Weight
Inches
Lbs
mm
Kg
10
5.3
254
2,4
111 ⁄ 2
9.5
292
4,3
13
14.7
330
6,7
141 ⁄ 2
18.6
368
8,4
16
24.1
406
10,9
20
40.9
508
18,6
24
63.7
610
28,9
306-3D
60° Elbow
Approx
C to E
Weight
Inches
Lbs
mm
Kg
71 ⁄ 2
4.7
191
2,1
81 ⁄ 4
8.2
210
3,7
91 ⁄4
12.6
235
5,7
10
14.4
254
6,5
11
20.4
279
9,3
13 3 ⁄ 4
34.5
349
15,7
53.7
161 ⁄ 2
419
24,4
R = 3D
R = 3D
R = 3D
GROOVED FITTINGS
C to E
R = 3D
Figure 301-3D
(45°)
Figure 303-3D
(30°)
Figure 312-3D
(22.5°)
Figure 311-3D
(11.25°)
301-3D
45° Elbow
Approx
C to E
Weight
Inches
Lbs
mm
Kg
61 ⁄ 2
4.2
165
1,9
71 ⁄4
7.6
184
3,4
73 ⁄4
11.2
197
5,1
81 ⁄ 2
12.3
216
5,6
9
17.8
229
8,1
111 ⁄ 4
30.1
286
13,7
131 ⁄ 2
46.9
343
21,3
303-3D
30° Elbow
Approx
C to E
Weight
Inches
Lbs
mm
Kg
53 ⁄4
3.8
146
1,7
6
6.4
152
2,9
61 ⁄ 2
9.7
165
4,4
63 ⁄4
10.2
171
4,6
14.8
71 ⁄4
184
6,7
9
24.9
229
11,3
10 3 ⁄ 4
38.6
273
17,5
312-3D
22 1 ⁄ 2° Elbow
Approx
C to E
Weight
Inches
Lbs
mm
Kg
51 ⁄ 4
3.5
133
1,6
51 ⁄ 2
5.8
140
2,6
53 ⁄4
8.5
146
3,9
6
9.2
152
4,2
61 ⁄ 2
13.4
165
6,1
8
22.2
203
10,1
91 ⁄ 2
34.2
241
15,5
311-3D
111 ⁄ 4° Elbow
Approx
C to E
Weight
Inches
Lbs
mm
Kg
41 ⁄ 2
2.9
114
1,3
43 ⁄4
4.9
121
2,2
5
7.3
127
3,3
5
7.6
127
3,4
51 ⁄ 4
10.5
133
4,8
61 ⁄ 2
17.6
165
8
73 ⁄4
27.1
197
12,3
Nominal
Inches
mm
O.D.
Inches
mm
2
50
21 ⁄ 2
65
3
80
31 ⁄ 2
90
4
100
5
125
6
150
2.375
60,3
2.875
73,0
3.500
88,9
4.000
101,6
4.500
114,3
5.563
141,3
6.625
168,3
8
8.625
32
128.0
22
108.0
18
94.3
141 ⁄ 2
78.7
12 3 ⁄ 4
69.3
10 1 ⁄ 2
55.7
200
10
250
12
300
14
350
16
400
18
450
20
500
24
600
219,1
10.750
273,1
12.750
323,9
14.000
355,6
16.000
406,4
18.000
457,2
20.000
508,0
24.000
609,6
813
40
1016
48
1219
56
1422
64
1626
72
1829
80
2032
96
2438
58,1
226.5
102,8
332.9
151
427.6
194
560.3
254,1
710.7
322,4
879.3
398,8
1270.3
576,2
559
27 1 ⁄ 4
692
32 3 ⁄ 4
832
381 ⁄ 4
972
43 3 ⁄ 4
1111
49 1 ⁄ 4
1251
54 3 ⁄ 4
1391
651 ⁄ 2
1664
49,0
189.4
85,9
278.8
126,5
358.5
162,6
470.1
213,2
596.9
270,7
738.7
335,1
1,063.6
482,4
457
22 1 ⁄ 2
572
27
686
311 ⁄ 2
800
36
914
40 1 ⁄ 2
1029
45
1143
53 3 ⁄ 4
1365
42,8
166.9
75,7
245.3
111,3
315.0
142,9
412.8
187,2
523.7
237,5
647.8
293,8
931.0
422,3
368
18
457
213 ⁄ 4
552
251 ⁄ 4
641
29
737
32 1 ⁄ 2
826
36
914
431 ⁄ 4
1099
35,7
138.2
62,7
204.7
92,9
261.4
118,6
334.5
151,7
435.1
197,4
536.4
243,3
775.7
351,9
324
16
406
19 1 ⁄ 4
489
22 1 ⁄ 2
572
251 ⁄ 2
648
28 3 ⁄ 4
730
32
813
381 ⁄ 4
972
31,4
123.2
55,9
181.6
82,4
233.7
106
303.2
137,5
385.7
175
478.1
216,9
687.2
311,8
267
13
330
151 ⁄ 2
394
181 ⁄ 4
464
20 3 ⁄ 4
527
23.35
593
26
660
31
787
25,3
97.3
44,1
141.8
64,3
184.4
83,6
239.9
108,8
304.5
138,1
377.7
171,3
540.9
245,3
Long radius Elbows 3D, 5D, and 6D, in sizes up to and including 4" (100mm), are provided with 4" (100mm) long integral tangent.
Remaining sizes provided with integral tangents with lengths equal to nominal pipe size.
Grooved or plain-end available; specify choice on order.
Material is standard wall steel pipe to ASTM A 53, Grade B. (Other materials available on request).
Elbow bends to conform to above radii.
C to E tolerances: 2" - 6" (50mm - 150mm) ± 1 ⁄ 8" (3,2 mm); 8" - 16" (200mm - 400mm) ± 1 ⁄ 4" (6,4 mm);
18" - 24" (450mm - 600mm) ± 3 ⁄ 8" (9,5mm).
All weights are approximate, based on calculated weight of pipe.
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
Refer to back cover for country-specific customer care numbers.
43
GROOVED FITTINGS
Long Radius 5D Elbows
Tech Data Sheet: G180
C to E
C to E
C to E
C to E
C to E
GROOVED FITTINGS
C to E
R = 5D
Pipe Size
Nominal
Inches
mm
O.D.
Inches
mm
2
50
21 ⁄ 2
65
3
80
31 ⁄ 2
90
4
100
5
125
6
150
8
200
10
250
12
300
14
350
16
400
18
450
20
500
24
600
2.375
60,3
2.875
73,0
3.500
88,9
4.000
101,6
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
10.750
273,1
12.750
323,9
14.000
355,6
16.000
406,4
18.000
457,2
20.000
508,0
24.000
609,6
R = 5D
Figure 310-5D
(90°)
Figure 306-5D
(60°)
310-5D
90° Elbow
Approx
C to E
Weight
Inches
Lbs
mm
Kg
14
7.2
356
3,3
16 1 ⁄ 2
13.3
419
6
19
21.0
483
9,5
211 ⁄ 2
26.9
546
12,2
24
35.4
610
16,1
30
60
762
27,2
36
93.5
914
42,4
48
187.9
1219
85,2
60
332.6
1524
150,9
72
488.8
1829
221,7
84
627.7
2134
284,7
96
822.5
2438
373,1
108
1,043.5
2743
473,3
120
1,290.9
3048
585,5
144
1,864.4
3658
845,7
306-5D
60° Elbow
Approx
C to E
Weight
Inches
Lbs
mm
Kg
6.1
93 ⁄4
248
2,8
111 ⁄ 4
11.2
286
5,1
17.5
12 3 ⁄ 4
324
7,9
12 1 ⁄ 4
20.0
311
9,1
151 ⁄ 2
28.9
394
13,1
49.2
19 1 ⁄ 2
495
22,3
231 ⁄ 4
76.1
591
34,5
31
152.9
787
69,4
39
272.5
991
123,6
46 3 ⁄ 4
400.0
1187
181,4
541 ⁄ 2
513.3
1384
232,8
672.2
62 1 ⁄ 4
1581
304,9
70
852.5
1778
386,7
1,054.2
77 3 ⁄ 4
1975
478,2
931 ⁄ 4
1,521.8
2369
690,3
R = 5D
R = 5D
R = 5D
Figure 312-5D
(22.5°)
Figure 301-5D
(45°)
Figure 303-5D
(30°)
301-5D
45° Elbow
Approx
C to E
Weight
Inches
Lbs
mm
Kg
81 ⁄ 4
5.5
210
2,5
91 ⁄4
9.8
235
4,4
10 1 ⁄ 4
15.1
260
6,8
111 ⁄ 4
16.5
286
7,5
12 1 ⁄ 2
25.4
318
11,5
151 ⁄ 2
42.3
394
19,2
181 ⁄ 2
65.5
470
29,7
130.8
241 ⁄ 2
622
59,3
232.5
30 3 ⁄ 4
781
105,5
37
342.7
940
155,4
43
438.3
1092
198,8
49 1 ⁄ 4
575.6
1251
261,1
551 ⁄ 4
728.2
1403
330,3
611 ⁄ 2
902.5
1562
409,4
73 3 ⁄ 4
1,302.5
1873
590,8
303-5D
312-5D
30° Elbow
22 1 ⁄ 2° Elbow
Approx
Approx
C to E
C to E
Weight
Weight
Inches
Inches
Lbs
Lbs
mm
mm
Kg
Kg
63 ⁄4
4.6
6
4.1
171
2,1
152
1,9
71 ⁄ 2
8.3
61 ⁄ 2
7.2
191
3,8
165
3,3
8
12.3
7
10.8
203
5,6
178
4,9
83 ⁄4
13.0
71 ⁄ 2
11.3
222
5,9
191
5,1
91 ⁄ 2
20.1
8
17.1
241
9,1
203
7,8
113 ⁄ 4
33.7
10
28.9
298
15,3
254
13,1
14
52.7
12
45.0
356
23,9
305
20,4
18 3 ⁄ 4
105.2
16
90.5
476
47,7
406
41,1
231 ⁄ 2
186.8
20
160.3
597
84,7
508
72,7
28
272.3
24
235.5
711
123,5
610
106,8
32 3 ⁄ 4
350.7
28
302.5
832
159,1
711
137,2
37 1 ⁄ 2
460.6
32
396.4
953
208,9
813
179,8
42 1 ⁄ 4
585.3
36
506.9
1073
265,5
914
229,9
46 3 ⁄ 4
720.7
40
622.1
1187
326,9
1016
282,2
561 ⁄ 4 1,044.0
48
898.5
1429
473,6
1219
407,6
R = 5D
Figure 311-5D
(11.25°)
311-5D
111 ⁄ 4° Elbow
Approx
C to E
Weight
Inches
Lbs
mm
Kg
5
3.3
127
1,5
51 ⁄ 4
5.6
133
2,5
51 ⁄ 2
8.3
140
3,8
53 ⁄4
8.7
146
3,9
6
12.5
152
5,7
71 ⁄ 2
21.2
191
9,6
9
32.9
229
14,9
12
66.2
305
30
15
117.2
381
53,2
18
172.2
457
78,1
21
221.2
533
100,3
24
289.8
610
131,5
27
367.8
686
166,8
30
454.9
762
206,3
35 3 ⁄ 4
651.2
908
295,4
Long radius Elbows 3D, 5D, and 6D, in sizes up to and including 4" (100mm), are provided with 4" (100mm) long integral tangent.
Remaining sizes provided with integral tangents with lengths equal to nominal pipe size.
Grooved or plain-end available; specify choice on order.
Material is standard wall steel pipe to ASTM A 53, Grade B. (Other materials available on request).
Elbow bends to conform to above radii.
C to E tolerances: 2" - 6" (50mm - 150mm) ± 1 ⁄ 8" (3,2 mm); 8" - 16" (200mm - 400mm) ± 1 ⁄ 4" (6,4 mm);
18" - 24" (450mm - 600mm) ± 3 ⁄ 8" (9,5mm).
All weights are approximate, based on calculated weight of pipe.
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
44
www.grinnell.com
GROOVED FITTINGS
Long Radius 6D Elbows
C to E
Tech Data Sheet: G180
C to E
C to E
C to E
C to E
R = 6D
Pipe Size
Nominal
Inches
mm
O.D.
Inches
mm
2
50
21 ⁄ 2
65
3
80
31 ⁄ 2
90
4
100
5
125
6
150
8
200
10
250
12
300
14
350
16
400
18
450
20
500
24
600
2.375
60,3
2.875
73,0
3.500
88,9
4.000
101,6
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
10.750
273,1
12.750
323,9
14.000
355,6
16.000
406,4
18.000
457,2
20.000
508,0
24.000
609,6
R = 6D
R = 6D
R = 6D
R = 6D
GROOVED FITTINGS
C to E
R = 6D
Figure 310-6D
(90°)
Figure 306-6D
(60°)
Figure 301-6D
(45°)
Figure 303-6D
(30°)
Figure 312-6D
(22.5°)
Figure 311-6D
(11.25°)
310-6D
90° Elbow
Approx
C to E
Weight
Inches
Lbs
mm
Kg
16
8.2
406
3,7
19
13.0
483
5,9
22
24.1
559
10,9
25
31.1
635
14,1
28
41.1
711
18,6
35
69.6
889
31,6
42
108.4
1067
49,2
56
217.8
1422
98,8
70
385.6
1778
174,9
84
566.7
2134
257,1
98
727.8
2489
330,1
112
953.6
2845
432,5
126
1,209.9
3200
548,8
140
1,496.6
3556
678,8
168
2,161.6
4267
980,5
306-6D
60° Elbow
Approx
C to E
Weight
Inches
Lbs
mm
Kg
11
6.9
279
3,1
12 3 ⁄ 4
12.7
324
5,8
19.9
141 ⁄ 2
368
9,0
161 ⁄ 4
22.8
413
10,3
18
33.6
457
15,2
56.2
22 1 ⁄ 4
565
25,5
26 3 ⁄ 4
87.7
679
39,8
176.7
35 3 ⁄ 4
908
80,1
313.1
44 3 ⁄ 4
1137
142
531 ⁄ 2
458.5
1359
208
62 1 ⁄ 2
589.6
1588
267,4
711 ⁄ 2
773.3
1816
350,8
801 ⁄ 2
981.9
2045
445,4
89 1 ⁄ 4
1,212.0
2267
549,8
107 1 ⁄ 4
1,752.9
2724
795,1
301-6D
45° Elbow
Approx
C to E
Weight
Inches
Lbs
mm
Kg
9
6.0
229
2,7
10 1 ⁄ 4
11.0
260
5
111 ⁄ 2
17.1
292
7,8
12 3 ⁄ 4
18.6
324
8,4
14
28.4
356
12,9
17 1 ⁄ 2
48.1
445
21,8
21
74.8
533
33,9
28
150.4
711
68,2
35
266.3
889
120,8
413 ⁄ 4
388.9
1060
176,4
48 3 ⁄ 4
499.9
1238
226,8
55 3 ⁄ 4
655.5
1416
297,3
62 3 ⁄ 4
832.7
1594
377,7
69 3 ⁄ 4
1,029.8
1772
467,1
83 3 ⁄ 4
1,488.2
2127
675
303-6D
30° Elbow
Approx
C to E
Weight
Inches
Lbs
mm
Kg
5.0
71 ⁄4
184
2,3
8
8.9
203
4
83 ⁄4
13.6
222
6,2
93 ⁄4
14.4
248
6,5
10 1 ⁄ 2
22.5
267
10,2
13
37.7
330
17,1
15 3 ⁄ 4
59.3
400
26,9
21
119.2
533
54,1
26
208.9
660
94,8
311 ⁄ 4
307.5
794
139,5
361 ⁄ 2
395.4
927
179,4
413 ⁄ 4
518.6
1060
235,2
47
658.5
1194
298,7
52 1 ⁄ 4
815.0
1327
369,7
62 1 ⁄ 2
1,173.0
1588
532,1
312-6D
22 1 ⁄ 2° Elbow
Approx
C to E
Weight
Inches
Lbs
mm
Kg
61 ⁄ 2
4.5
165
2
7
7.8
178
3,5
71 ⁄ 2
11.7
191
5,3
81 ⁄ 4
12.3
210
5,6
83 ⁄4
18.9
222
8,6
11
32.3
279
14,7
131 ⁄ 4
50.5
337
22,9
17 1 ⁄ 2
100.4
445
45,5
22
178.8
559
81,1
26 1 ⁄ 4
261.1
667
118,4
30 3 ⁄ 4
336.9
781
152,8
351 ⁄ 4
443.0
895
200,9
39 1 ⁄ 2
559.5
1003
253,8
44
694.1
1118
314,8
52.34
992.5
1329
450,2
311-6D
111 ⁄ 4° Elbow
Approx
C to E
Weight
Inches
Lbs
mm
Kg
51 ⁄ 4
3.6
133
1,6
51 ⁄ 2
6.0
140
2,7
53 ⁄4
8.7
146
3,9
6
9.2
152
4,2
61 ⁄ 2
13.8
165
6,3
8
22.9
203
10,4
91 ⁄ 2
35.3
241
16
12 3 ⁄ 4
71.5
324
32,4
16
127.1
406
57,7
19
184.4
483
83,6
22 1 ⁄ 4
238.0
565
108
251 ⁄ 2
312.9
648
141,9
28 3 ⁄ 4
398.7
730
180,8
313 ⁄ 4
488.7
806
221,7
38 1 ⁄ 4
709.3
972
321,7
Long radius Elbows 3D, 5D, and 6D, in sizes up to and including 4" (100mm), are provided with 4" (100mm) long integral tangent.
Remaining sizes provided with integral tangents with lengths equal to nominal pipe size.
Grooved or plain-end available; specify choice on order.
Material is standard wall steel pipe to ASTM A 53, Grade B. (Other materials available on request).
Elbow bends to conform to above radii.
C to E tolerances: 2" - 6" (50mm - 150mm) ± 1 ⁄ 8" (3,2 mm); 8" - 16" (200mm - 400mm) ± 1 ⁄ 4" (6,4 mm);
18" - 24" (450mm - 600mm) ± 3 ⁄ 8" (9,5mm).
All weights are approximate, based on calculated weight of pipe.
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
Refer to back cover for country-specific customer care numbers.
45
GROOVED FITTINGS
Figures 219 & 319 Tees
GROOVED FITTINGS
Tech Data Sheet: G180
Figure 219
Cast Tee
Pipe Size
C to E
C to E
Figure 319
Fabricated Tee
Nominal
Inches
mm
O.D.
Inches
mm
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
216,3mm
200
8
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.563
141,3
6.500
165,1
6.625
168,3
8.500
216,3
8.625
Figure 219 - Cast
Approx
C to E
Weight
Inches
Lbs
mm
Kg
2.75
1.7
69,9
0,8
2.75
2.1
69,9
1,0
3.25
2.8
82,6
1,3
3.75
4.4
95,3
2,0
3.75
6.5
95,3
2,9
4.25
6.5
108,0
2,9
5.00
10.7
127,0
4,8
5.50
15.2
139,7
6,9
5.50
15.5
139,7
7,0
6.50
24.2
165,1
11,0
6.50
23.0
165,1
10,4
7.75
43.0
196,9
19,5
7.75
43.7
200 ◗
10
219,1
196,9
19,8
–
10.750
9.00
57.0
–
–
273,0
228,6
25,9
–
–
12.750
10.00
110.0
–
–
323,9
254,0
49,9
–
–
14.000
355,6
16.000
406,4
18.000
457,2
20.000
508,0
24.000
609,6
11.00
279,0
12.00
305,0
–
–
–
–
–
–
135.0
61,2
136.0
61,7
–
–
–
–
–
–
–
–
–
–
15.50
394,0
17.25
438,0
20.00
508,0
–
–
–
–
218.0
98,9
275.0
125,0
379.0
172,0
250 ◗
12
C to E
C to E
46
300 ◗
14
350
16
400
18
450
20
500
24
600
Figure 319 - Fabricated
Approx
C to E
Weight
Inches
Lbs
mm
Kg
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
◗ Sizes are available to JIS standards. Contact GRINNELL Mechanical
Products for details.
For information on larger sizes, European sizes or other alternative sizes,
contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
www.grinnell.com
GROOVED FITTINGS
Figure 320 Tees
(Groove x Groove x Male Thread)
GROOVED FITTINGS
Tech Data Sheet: G180
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
11 ⁄ 4
1.660
32
42,4
1.900
11 ⁄ 2
40
48,3
2
2.375
50
60,3
2.875
21 ⁄ 2
60
73,0
3
3.500
80
88,9
4
4.500
100
114,3
5
5.563
125
141,3
6
6.625
150
168,3
8
8.625
200
219,1
10
10.750
250
273,0
12
12.750
300
323,9
C to GE
Inches
mm
C to TE
Inches
mm
Approx.
Weight
Lbs
Kg
2.75
69,9
2.75
69,9
3.25
82,6
3.75
95,3
4.25
108,0
5.00
127,0
5.50
139,7
6.50
165,1
7.75
196,9
9.00
228,6
10.00
254,0
2.75
69,9
2.75
69,9
4.25
108,0
3.75
95,3
6.00
152,4
7.25
184,2
5.50
139,7
6.50
165,1
7.75
196,9
9.00
228,6
10.00
254,0
1.5
0,7
1.9
0,9
3.2
1,5
4.0
1,8
6.0
2,7
11.0
5,0
23.0
10,5
23.0
10,5
38.7
17,6
72.1
32,8
92.5
42,0
C to TE
C to GE
For information on larger sizes, European sizes or other alternative sizes, contact
GRINNELL Mechanical Products.
Available with BSP threads. Contact GRINNELL Mechanical Products for details.
See page 37 for fitting specifications.
Refer to back cover for country-specific customer care numbers.
47
GROOVED FITTINGS
Figures 221 & 321 Reducing Tees
(Page 1 of 3)
GROOVED FITTINGS
Tech Data Sheet: G180
Figure 221 Reducing Tee Cast
Pipe Size
C to E
C to E
Figure 221 Reducing Tee
Cast
C to E
C to E
Figure 321 Reducing Tee
Fabricated
48
Nominal
Inches
mm
O.D.
Inches
mm
11 ⁄ 2 x 11 ⁄ 2 x 11 ⁄ 4
40 x 40 x 32
2x2x1
50 x 50 x 25
2 x 2 x 11 ⁄ 2
50 x 50 x 40
21 ⁄ 2 x 21 ⁄ 2 x 1
65 x 65 x 25
2 1 ⁄ 2 x 2 1 ⁄ 2 x 11 ⁄ 4
65 x 65 x 32
2 1 ⁄ 2 x 2 1 ⁄ 2 x 11 ⁄ 2
65 x 65 x 40
21 ⁄ 2 x 21 ⁄ 2 x 2
65 x 65 x 50
76,1mm x 76,1mm x 11 ⁄ 2
65 x 65 x 40
76,1mm x 76,1mm x 2
65 x 65 x 50
3x3x1
80 x 80 x 25
3 x 3 x 11 ⁄ 2
80 x 80 x 40
3x3x2
80 x 80 x 50
3 x 3 x 21 ⁄ 2
80 x 80 x 65
3 x 3 x 76,1mm
80 x 80 x 65
4x4x1
100 x 100 x 25
4 x 4 x 11 ⁄ 4
100 x 100 x 32
4 x 4 x 11 ⁄ 2
100 x 100 x 40
4x4x2
100 x 100 x 50
4 x 4 x 21 ⁄ 2
100 x 100 x 65
4 x 4 x 76,1mm
100 x 100 x 65
4x4x3
100 x 100 x 80
139,7mm x 139,7mm x 3
125 x 125 x 80
139,7mm x 139,7mm x 4
125 x 125 x 100
1.900 x 1.900 x 1.660
48,3 x 48,3 x 42,4
2.375 x 2.375 x 1.315
60,3 x 60,3 x 33,4
2.375 x 2.375 x 1.900
60,3 x 60,3 x 48,3
2.875 x 2.875 x 1.315
73,0 x 73,0 x 33,4
2.875 x 2.875 x 1.660
73,0 x 73,0 x 42,4
2.875 x 2.875 x 1.900
73,0 x 73,0 x 48,3
2.875 x 2.875 x 2.375
73,0 x 73,0 x 60,3
3.000 x 3.000 x 1.900
76,1 x 76,1 x 48,3
3.000 x 3.000 x 2.375
76,1 x 76,1 x 60,3
3.500 x 3.500 x 1.315
88,9 x 88,9 x 33,4
3.500 x 3.500 x 1.900
88,9 x 88,9 x 48,3
3.500 x 3.500 x 2.375
88,9 x 88,9 x 60,3
3.500 x 3.500 x 2.875
88,9 x 88,9 x 73,0
3.500 x 3.500 x 3.000
88,9 x 88,9 x 76,1
4.500 x 4.500 x 1.315
114,3 x 114,3 x 33,4
4.500 x 4.500 x 1.660
114,3 x 114,3 x 42,4
4.500 x 4.500 x 1.900
114,3 x 114,3 x 48,3
4.500 x 4.500 x 2.375
114,3 x 114,3 x 60,3
4.500 x 4.500 x 2.875
114,3 x 114,3 x 73,0
4.500 x 4.500 x 3.000
114,3 x 114,3 x 76,1
4.500 x 4.500 x 3.500
114,3 x 114,3 x 88,9
5.500 x 5.500 x 3.500
139,7 x 139,7 x 88,9
5.500 x 5.500 x 4.500
139,7 x 139,7 x 114,3
Figure 321 Reducing Tee Fabricated
Figure 221 - Cast
Approx.
C to E
Weight
Inches
Lbs
mm
Kg
–
–
–
–
–
–
–
–
3.25
2.7
82,6
1,2
–
–
–
–
–
–
–
–
3.75
4.2
95,3
1,9
3.75
4.2
95,3
1,9
3.75
4.5
95,3
2,0
3.75
4.3
95,3
2,0
4.25
5.6
108,0
2,5
4.25
5.9
108,0
2,7
4.25
6.0
108,0
2,7
4.25
6.2
108,0
2,8
4.25
6.0
108,0
2,7
–
–
–
–
–
–
–
–
–
–
–
–
5.00
9.1
127,0
4,1
5.00
9.5
127,0
4,3
5.00
9.5
127,0
4,3
5.00
9.7
127,0
4,4
5.50
12.7
139,7
5,8
5.50
13.4
139,7
6,1
Figure 321 - Fabricated
Approx.
C to E
Weight
Inches
Lbs
mm
Kg
2.75
1.5
69,9
0,7
3.25
1.6
88,6
0,74
–
–
–
–
3.75
2.3
95,3
1,1
3.75
4.2
95,3
1,9
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
5.00
8.0
127,0
3,7
5.00
9.8
127,0
4,4
5.00
9.9
127,0
4,5
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
www.grinnell.com
GROOVED FITTINGS
Figures 221 & 321 Reducing Tees
(Page 2 of 3)
Nominal
Inches
mm
O.D.
Inches
mm
5x5x2
125 x 125 x 50
5 x 5 x 21 ⁄ 2
125 x 125 x 65
5x5x3
125 x 125 x 80
5x5x4
125 x 125 x 100
165,1mm x 165,mm x 3
150 x 150 x 80
165,1mm x 165,mm x 4
150 x 150 x 100
6x6x2
150 x 150 x 50
6 x 6 x 21 ⁄ 2
150 x 150 x 65
6 x 6 x 76,1mm
150 x 150 x 65
6x6x3
150 x 150 x 80
6x6x4
150 x 150 x 100
6 x 6 x 139,7mm
150 x 150 x 125
6x6x5
150 x 150 x 125
8x8x2
200 x 200 x 50 ◗
8 x 8 x 21 ⁄ 2
200 x 200 x 65 ◗
8x8x3
200 x 200 x 80 ◗
8x8x4
200 x 200 x 100 ◗
8 x 8 x 139,7mm
200 x 200 x 125 ◗
8x8x5
200 x 200 x 125 ◗
8 x 8 x 165,1mm
200 x 200 x 150 ◗
8x8x6
200 x 200 x 150 ◗
10 x 10 x 2
250 x 250 x 50 ◗
10 x 10 x 3
250 x 250 x 80 ◗
10 x 10 x 4
250 x 250 x 100 ◗
10 x 10 x 5
250 x 250 x 125 ◗
10 x 10 x 6
250 x 250 x 150 ◗
10 x 10 x 8
250 x 250 x 200 ◗
12 x 12 x 3
300 x 300 x 80 ◗
12 x 12 x 4
300 x 300 x 100 ◗
5.563 x 5.563 x 2.375
141,3 x 141,3 x 60,3
5.563 x 5.563 x 2.875
141,3 x 141,3 x 73,0
5.563 x 5.563 x 3.500
141,3 x 141,3 x 88,9
5.563 x 5.563 x 4.500
141,3 x 141,3 x 114,3
6.500 x 6.500 x 3.500
165,1 x 165,1 x 88,9
6.500 x 6.500 x 4.500
165,1 x 165,1 x 114,3
6.625 x 6.625 x 2.375
168,3 x 168,3 x 60,3
6.625 x 6.625 x 2.875
168,3 x 168,3 x 73,0
6.625 x 6.625 x 3.000
168,3 x 168,3 x 76,1
6.625 x 6.625 x 3.500
168,3 x 168,3 x 88,9
6.625 x 6.625 x 4.500
168,3 x 168,3 x 114,3
6.625 x 6.625 x 5.500
168,3 x 168,3 x 139,7
6.625 x 6.625 x 5.563
168,3 x 168,3 x 141,3
8.625 x 8.625 x 2.375
219,1 x 219,1 x 60,3
8.625 x 8.625 x 2.875
219,1 x 219,1 x 73,0
8.625 x 8.625 x 3.500
219,1 x 219,1 x 88,9
8.625 x 8.625 x 4.500
219,1 x 219,1 x 114,1
8.625 x 8.625 x 5.500
219,1 x 219,1 x 139,7
8.625 x 8.625 x 5.563
219,1 x 219,1 x 141,3
8.625 x 8.625 x 6.500
219,1 x 219,1 x 165,1
8.625 x 8.625 x 6.625
219,1 x 219,1 x 168,3
10.750 x 10.750 x 2.375
273,0 x 273,0 x 60,3
10.750 x 10.750 x 3.500
273,0 x 273,0 x 88,9
10.750 x 10.750 x 4.500
273,0 x 273,0 x 114,3
10.750 x 10.750 x 5.563
273,0 x 273,0 x 141,3
10.750 x 10.750 x 6.625
273,0 x 273,0 x 168,3
10.750 x 10.750 x 8.625
273,0 x 273,0 x 219,1
12.750 x 12.750 x 3.500
323,9 x 323,9 x 88,9
12.750 x 12.750 x 4.500
323,9 x 323,9 x 114,3
Figure 221 - Cast
Approx.
C to E
Weight
Inches
Lbs
mm
Kg
–
–
–
–
5.50
18.0
139,7
8,2
5.50
14.0
139,7
6,4
5.50
13.9
139,7
6,3
6.50
18.0
165,1
8,2
6.50
19.5
165,1
8,9
6.50
19.4
165,1
8,8
6.50
21.2
165,1
9,8
6.50
21.2
165,1
9,8
6.50
21.0
165,1
9,5
6.50
21.8
165,1
9,9
6.50
23.0
165,1
10,4
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
7.75
37.2
196,9
16,9
7.75
37.7
196,9
17,1
–
–
–
–
7.75
37.7
196,9
17,1
7.75
37.4
196,9
17,0
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Refer to back cover for country-specific customer care numbers.
Figure 321 - Fabricated
Approx.
C to E
Weight
Inches
Lbs
mm
Kg
5.50
14.5
139,7
6,6
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
6.50
27.0
165,1
12,2
7.75
36.2
196,9
16,4
7.75
36.4
196,9
16,5
7.75
36.5
196,9
16,6
–
–
–
–
–
–
–
–
7.75
36.8
196,9
16,7
–
–
–
–
–
–
–
–
9.00
57.1
228,6
25,9
9.00
57.4
228,6
26,0
9.00
58.0
228,6
26,3
9.00
57.8
228,6
26,2
9.00
66.0
228,6
27,2
9.00
62.0
228,6
28,1
10.00
80.2
254,0
36,4
10.00
80.5
254,0
36,5
Tech Data Sheet: G180
GROOVED FITTINGS
Pipe Size
C to E
C to E
Figure 221 Reducing Tee
Cast
C to E
C to E
Figure 321 Reducing Tee
Fabricated
49
GROOVED FITTINGS
Figures 221 & 321 Reducing Tees
(Page 3 of 3)
Tech Data Sheet: G180
GROOVED FITTINGS
Pipe Size
C to E
C to E
Figure 221 Reducing Tee
Cast
C to E
C to E
Figure 321 Reducing Tee
Fabricated
Nominal
Inches
mm
O.D.
Inches
mm
12 x 12 x 5
300 x 300 x 125 ◗
12 x 12 x 6
300 x 300 x 150 ◗
12 x 12 x 8
300 x 300 x 200 ◗
12 x 12 x 10
300 x 300 x 250 ◗
14 x 14 x 6
350 x 350 x 150
14 x 14 x 8
350 x 350 x 200
14 x 14 x 10
350 x 350 x 250
14 x 14 x 12
350 x 350 x 300
16 x 16 x 4
400 x 400 x 100
16 x 16 x 8
400 x 400 x 200
16 x 16 x 10
400 x 400 x 250
16 x 16 x 12
400 x 400 x 300
16 x 16 x 14
400 x 400 x 350
18 x 18 x 8
450 x 450 x 200
18 x 18 x 10
450 x 450 x 250
18 x 18 x 12
450 x 450 x 300
18 x 18 x 14
450 x 450 x 350
18 x 18 x 16
450 x 450 x 400
20 x 20 x 14
500 x 500 x 350
20 x 20 x 16
500 x 500 x 400
20 x 20 x 18
500 x 500 x 450
24 x 24 x 10
600 x 600 x 250
24 x 24 x 12
600 x 600 x 300
24 x 24 x 14
600 x 600 x 350
24 x 24 x 16
600 x 600 x 400
24 x 24 x 18
600 x 600 x 450
24 x 24 x 20
600 x 600 x 500
12.750 x 12.750 x 5.563
323,9 x 323,9 x 141,3
12.750 x 12.750 x 6.625
323,9 x 323,9 x 168,3
12.750 x 12.750 x 8.625
323,9 x 323,9 x 219,1
12.750 x 12.750 x 10.750
323,9 x 323,9 x 273,0
14.000 x 14.000 x 6.625
355,6 x 355,6 x 168,3
14.000 x 14.000 x 8.625
355,6 x 355,6 x 219,1
14.000 x 14.000 x 10.750
355,6 x 355,6 x 273,0
14.000 x 14.000 x 12.750
355,6 x 355,6 x 323,9
16.000 x 16.000 x 4.500
406,4 x 406,4 x 114,3
16.000 x 16.000 x 8.625
406,4 x 406,4 x 219,1
16.000 x 16.000 x 10.750
406,4 x 406,4 x 273,0
16.000 x 16.000 x 12.750
406,4 x 406,4 x 323,9
16.000 x 16.000 x 14.000
406,4 x 406,4 x 355,6
18.000 x 18.000 x 8.625
457,2 x 457,2 x 219,1
18.000 x 18.000 x 10.750
457,2 x 457,2 x 273,0
18.000 x 18.000 x 12.750
457,2 x 457,2 x 323,9
18.000 x 18.000 x 14.000
457,2 x 457,2 x 355,6
18.000 x 18.000 x 16.000
457,2 x 457,2 x 406,4
20.000 x 20.000 x 14.000
508,0 x 508,0 x 355,6
20.000 x 20.000 x 16.000
508,0 x 508,0 x 406,4
20.000 x 20.000 x 18.000
508,0 x 508,0 x 457,2
24.000 x 24.000 x 10.750
609,6 x 609,6 x 273,0
24.000 x 24.000 x 12.750
609,6 x 609,6 x 323,9
24.000 x 24.000 x 14.000
609,6 x 609,6 x 355,6
24.000 x 24.000 x 16.000
609,6 x 609,6 x 406,4
24.000 x 24.000 x 18.000
609,6 x 609,6 x 457,2
24.000 x 24.000 x 20.000
609,6 x 609,6 x 508,0
Figure 221 - Cast
Approx.
C to E
Weight
Inches
Lbs
mm
Kg
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Figure 321 - Fabricated
Approx.
C to E
Weight
Inches
Lbs
mm
Kg
10.00
80.7
254,0
36,6
10.00
80.9
254,0
36,7
10.00
76.3
254,0
34,6
10.00
77.6
254,0
35,2
11.00
103.3
279,4
46,9
11.00
103.4
279,4
46,9
11.00
104.3
279,4
47,3
11.00
105.3
279,4
47,8
12.00
110.7
304,8
50,2
12.00
128.5
304,8
58,3
12.00
129.3
304,8
58,6
12.00
130.2
304,8
59,1
12.00
140.4
304,8
63,7
15.50
192.7
393,7
87,4
15.50
193.6
393,7
87,8
15.50
196.3
393,7
89,0
15.50
201.3
393,7
91,3
15.50
203.2
393,7
92,2
17.25
247.9
450,9
112,4
17.25
250.1
450,9
113,4
17.25
252.2
450,9
114,4
20.00
330.9
508,0
150,1
20.00
334.5
508,0
151,7
20.00
340.3
508,0
154,4
20.00
342.6
508,0
155,4
20.00
344.7
508,0
156,4
20.00
346.8
508,0
157,3
◗ Sizes are available to JIS standards. Contact GRINNELL Mechanical Products for details.
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
50
www.grinnell.com
GROOVED FITTINGS
Figure 323 Reducing Tees
(Groove x Groove x Male Thread)
(Page 1 of 2)
Pipe Size
Nominal
Inches mm
11 ⁄ 2 x 11 ⁄ 2 x 11 ⁄ 4
40 x 40 x 32
2x2x1
50 x 50 x 25
2 x 2 x 11 ⁄ 4
50 x 50 x 32
2 x 2 x 11 ⁄ 2
50 x 50 x 40
21 ⁄ 2 x 21 ⁄ 2 x 1
65 x 65 x 25
2 1 ⁄ 2 x 2 1 ⁄ 2 x 11 ⁄ 4
65 x 65 x 32
2 1 ⁄ 2 x 2 1 ⁄ 2 x 11 ⁄ 2
65 x 65 x 40
21 ⁄ 2 x 21 ⁄ 2 x 2
65 x 65 x 50
3x3x1
80 x 80 x 25
3 x 3 x 11 ⁄ 2
80 x 80 x 40
3x3x2
80 x 80 x 50
3 x 3 x 21 ⁄ 2
80 x 80 x 65
4x4x1
100 x 100 x 25
4 x 4 x 11 ⁄ 4
100 x 100 x 32
4 x 4 x 11 ⁄ 2
100 x 100 x 40
4x4x2
100 x 100 x 50
4 x 4 x 21 ⁄ 2
100 x 100 x 65
4x4x3
100 x 100 x 80
5x5x2
125 x 125 x 50
5 x 5 x 21 ⁄ 2
125 x 125 x 65
5x5x3
125 x 125 x 80
5x5x4
125 x 125 x 100
6x6x2
150 x 150 x 50
6 x 6 x 21 ⁄ 2
150 x 150 x 65
6x6x3
150 x 150 x 80
6x6x4
150 x 150 x 100
6x6x5
150 x 150 x 125
O.D.
Inches mm
1.900 x 1.900 x 1.660
48,3 x 48,3 x 42,4
2.375 x 2.375 x 1.315
60,3 x 60,3 x 33,4
2.375 x 2.375 x 1.660
60,3 x 60,3 x 42,4
2.375 x 2.375 x 1.900
60,3 x 60,3 x 48,3
2.875 x 2.875 x 1.315
73,0 x 73,0 x 33,4
2.875 x 2.875 x 1.660
73,0 x 73,0 x 42,4
2.875 x 2.875 x 1.900
73,0 x 73,0 x 48,3
2.875 x 2.875 x 2.375
73,0 x 73,0 x 60,3
3.500 x 3.500 x 1.315
88,9 x 88,9 x 33,4
3.500 x 3.500 x 1.900
88,9 x 88,9 x 48,3
3.500 x 3.500 x 2.375
88,9 x 88,9 x 60,3
3.500 x 3.500 x 2.875
88,9 x 88,9 x 73,0
4.500 x 4.500 x 1.315
114,3 x 114,3 x 33,4
4.500 x 4.500 x 1.660
114,3 x 114,3 x 42,4
4.500 x 4.500 x 1.900
114,3 x 114,3 x 48,3
4.500 x 4.500 x 2.375
114,3 x 114,3 x 60,3
4.500 x 4.500 x 2.875
114,3 x 114,3 x 73,0
4.500 x 4.500 x 3.500
114,3 x 114,3 x 88,9
5.563 x 5.563 x 2.375
141,3 x 141,3 x 60,3
5.563 x 5.563 x 2.875
141,3 x 141,3 x 73,0
5.563 x 5.563 x 3.500
141,3 x 141,3 x 88,9
5.563 x 5.563 x 4.500
141,3 x 141,3 x 114,3
6.625 x 6.625 x 2.375
168,3 x 168,3 x 60,3
6.625 x 6.625 x 2.875
168,3 x 168,3 x 73,0
6.625 x 6.625 x 3.500
168,3 x 168,3 x 88,9
6.625 x 6.625 x 4.500
168,3 x 168,3 x 114,3
6.625 x 6.625 x 5.563
168,3 x 168,3 x 141,3
C to GE &
C to TE
Inches mm
3.25
82,6
3.25
82,6
3.25
82,6
3.25
82,6
3.75
95,3
3.75
95,3
3.75
95,3
3.75
95,3
4.25
108,0
4.25
108,0
4.25
108,0
4.25
108,0
5.00
127,0
5.00
127,0
5.00
127,0
5.00
127,0
5.00
127,0
5.00
127,0
5.50
139,7
5.50
139,7
5.50
139,7
5.50
139,7
6.50
165,1
6.50
165,1
6.50
165,1
6.50
165,1
6.50
165,1
Refer to back cover for country-specific customer care numbers.
Approx.
Weight
Lbs. kg
1.8
0,8
2.2
1,0
2.3
1,0
1.4
1,1
3.6
1,6
3.8
1,7
4.0
1,8
4.2
1,9
5.7
2,6
5.8
2,6
5.9
2,7
6.3
2,9
6.9
3,1
7.6
3,4
8.3
3,8
9.6
4,4
10.0
4,5
10.3
4,7
14.0
6,4
14.3
6,5
14.6
6,6
15.1
6,8
21.3
9,7
21.7
9,8
22.0
10,0
22.5
10,2
23.1
10,5
GROOVED FITTINGS
Tech Data Sheet: G180
C to E
C to E
51
GROOVED FITTINGS
Figure 323 Reducing Tees
(Groove x Groove x Male Thread)
(Page 2 of 2)
GROOVED FITTINGS
Tech Data Sheet: G180
Pipe Size
C to E
C to E
Nominal
Inches mm
8x8x2
200 x 200 x 50
8x8x3
200 x 200 x 80
8x8x4
200 x 200 x 100
8x8x5
200 x 200 x 125
8x8x6
200 x 200 x 150
10 x 10 x 2
250 x 250 x 50
10 x 10 x 3
250 x 250 x 80
10 x 10 x 4
250 x 250 x 100
10 x 10 x 5
250 x 250 x 125
10 x 10 x 6
250 x 250 x 150
10 x 10 x 8
250 x 250 x 200
12 x 12 x 3
300 x 300 x 80
12 x 12 x 4
300 x 300 x 100
12 x 12 x 5
300 x 300 x 125
12 x 12 x 6
300 x 300 x 150
12 x 12 x 8
300 x 300 x 200
12 x 12 x 10
300 x 300 x 250
O.D.
Inches mm
8.625 x 8.625 x 2.375
219,1 x 219,1 x 60,3
8.625 x 8.625 x 3.500
219,1 x 219,1 x 88,9
8.625 x 8.625 x 4.500
219,1 x 219,1 x 114,1
8.625 x 8.625 x 5.563
219,1 x 219,1 x 141,3
8.625 x 8.625 x 6.625
219,1 x 219,1 x 168,3
10.750 x 10.750 x 2.375
273,0 x 273,0 x 60,3
10.750 x 10.750 x 3.500
273,0 x 273,0 x 88,9
10.750 x 10.750 x 4.500
273,0 x 273,0 x 114,3
10.750 x 10.750 x 5.563
273,0 x 273,0 x 141,3
10.750 x 10.750 x 6.625
273,0 x 273,0 x 168,3
10.750 x 10.750 x 8.625
273,0 x 273,0 x 219,1
12.750 x 12.750 x 3.500
323,9 x 323,9 x 88,9
12.750 x 12.750 x 4.500
323,9 x 323,9 x 114,3
12.750 x 12.750 x 5.563
323,9 x 323,9 x 141,3
12.750 x 12.750 x 6.625
323,9 x 323,9 x 168,3
12.750 x 12.750 x 8.625
323,9 x 323,9 x 219,1
12.750 x 12.750 x 10.750
323,9 x 323,9 x 273,0
C to GE &
C to TE
Inches mm
7.75
196,9
7.75
196,9
7.75
196,9
7.75
196,9
7.75
196,9
9.00
228,6
9.00
228,6
9.00
228,6
9.00
228,6
9.00
228,6
9.00
228,6
10.00
254,0
10.00
254,0
10.00
254,0
10.00
254,0
10.00
254,0
10.00
254,0
Approx.
Weight
Lbs. kg
32.7
14,8
33.5
15,2
34.5
15,6
34.7
15,7
35.6
16,1
52.2
23,7
53.0
24,0
53.6
24,3
54.2
24,6
54.9
24,9
55.3
25,1
74.6
33,8
75.1
34,1
75.6
34,3
76.2
34,6
76.3
34,6
77.6
35,2
Available with BSP threads. Contact GRINNELL Mechanical Products for details.
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
52
www.grinnell.com
GROOVED FITTINGS
Figures 250 & 350 Concentric Reducers
(Page 1 of 3)
Nominal
Inches
mm
O.D.
Inches
mm
11 ⁄ 4 x 1
32 x 25
11 ⁄ 2 x 1
40 x 25
11 ⁄ 2 x 11 ⁄ 4
40 x 32
2x1
50 x 25
2 x 11 ⁄ 4
50 x 32
2 x 11 ⁄ 2
50 x 40
21 ⁄ 2 x 1
65 x 25
2 1 ⁄ 2 x 11 ⁄ 4
65 x 32
2 1 ⁄ 2 x 11 ⁄ 2
65 x 40
21 ⁄ 2 x 2
65 x 50
76,1mm x 11 ⁄ 4
65 x 32
76,1mm x 11 ⁄ 2
65 x 40
76,1mm x 2
65 x 50
3x1
80 x 25
3 x 11 ⁄ 4
80 x 32
3 x 11 ⁄ 2
80 x 40
3x2
80 x 50
3 x 21 ⁄ 2
80 x 65
3 x 76,1mm
80 x 65
4x1
100 x 25
4 x 11 ⁄ 4
100 x 32
4 x 11 ⁄ 2
100 x 40
4x2
100 x 50
4 x 21 ⁄ 2
100 x 65
4 x 76,1mm
100 x 65
4x3
100 x 80
139,7mm x 3
125 x 80
1.660 x 1.315
42,4 x 33,4
1.900 x 1.315
48,3 x 33,4
1.900 x 1.660
48,3 x 42,4
2.375 x 1.315
60,3 x 33,4
2.375 x 1.660
60,3 x 42,4
2.375 x 1.900
60,3 x 48,3
2.875 x 1.315
73,0 x 33,4
2.875 x 1.660
73,0 x 42,4
2.875 x 1.900
73,0 x 48,3
2.875 x 2.375
73,0 x 60,3
3.000 x 1.660
76,1 x 42,4
3.000 x 1.900
76,1 x 48,3
3.000 x 2.375
76,1 x 60,3
3.500 x 1.315
88,9 x 33,4
3.500 x 1.660
88,9 x 42,4
3.500 x 1.900
88,9 x 48,3
3.500 x 2.375
88,9 x 60,3
3.500 x 2.875
88,9 x 73,0
3.500 x 3.000
88,9 x 76,1
4.500 x 1.315
114,3 x 33,4
4.500 x 1.660
114,3 x 42,4
4.500 x 1.900
114,3 x 48,3
4.500 x 2.375
114,3 x 60,3
4.500 x 2.875
114,3 x 73,0
4.500 x 3.000
114,3 x 76,1
4.500 x 3.500
114,3 x 88,9
5.500 x 3.500
139,7 x 88,9
Figure 250 - Cast
Approx.
E to E
Weight
Inches
Lbs.
mm
kg
2.50
0.7
63,5
0,3
—
—
—
—
2.50
0.8
63,5
0,3
2.50
0.9
63,5
0,4
2.50
0.9
63,5
0,4
2.50
1.0
63,5
0,5
—
—
—
—
2.50
1.4
63,5
0,6
2.50
1.4
63,5
0,6
2.50
1.3
63,5
0,6
2.50
1.4
63,5
0,6
2.50
1.4
63,5
0,6
2.50
1.5
63,5
0,7
—
—
—
—
—
—
—
—
2.50
1.8
63,5
0,8
2.50
1.7
63,5
0,8
2.50
1.8
63,5
0,8
2.50
2.0
63,5
0,9
—
—
—
—
—
—
—
—
—
—
—
—
3.00
2.4
76,2
1,1
3.00
2.7
76,2
1,2
3.00
3.2
76,2
1,5
3.00
2.8
76,2
1,3
3.50
4.2
88,9
1,9
Figure 350 - Fabricated
Approx.
E to E
Weight
Inches
Lbs.
mm
kg
—
—
—
—
2.50
0.7
63,5
0,3
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
2.50
1.2
63,5
0,5
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
2.50
1.3
63,5
0,6
2.50
1.3
63,5
0,6
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
3.00
2.9
76,2
1,1
3.00
2.2
76,2
1,0
3.00
2.3
76,2
1,0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Refer to back cover for country-specific customer care numbers.
Tech Data Sheet: G180
GROOVED FITTINGS
Pipe Size
E to E
Figure 250
Concentric Reducer Cast
E to E
Figure 350
Concentric Reducer Fabricated
53
GROOVED FITTINGS
Figures 250 & 350 Concentric Reducers
(Page 2 of 3)
Tech Data Sheet: G180
GROOVED FITTINGS
Pipe Size
E to E
Figure 250
Cast Concentric
Reducer
E to E
Figure 350
Fabricated Concentric
Reducer
Nominal
Inches
mm
O.D.
Inches
mm
139,7mm x 4
125 x 100
5x2
125 x 50
5 x 21 ⁄ 2
125 x 65
5x3
125 x 80
5x4
125 x 100
165,1mm x 3
150 x 80
165,1mm x 4
150 x 100
165,1 x 139,7mm
150 x 125
6x2
150 x 50
6 x 21 ⁄ 2
150 x 65
6 x 76,1mm
150 x 65
6x3
150 x 80
6x4
150 x 100
6 x 139,7mm
150 x 125
6x5
150 x 125
8 x 21 ⁄ 2
200 x 65 ◗
8x3
200 x 80 ◗
8x4
200 x 100 ◗
8 x 139,7mm
200 x 125 ◗
8x5
200 x 125 ◗
8 x 165,1mm
5.500 x 4.500
139,7 x 114,3
5.563 x 2.375
141,3 x 60,3
5.563 x 2.875
141,3 x 73,0
5.563 x 3.500
141,3 x 88,9
5.563 x 4.500
141,3 x 114,3
6.500 x 3.500
165,1 x 88,9
6.500 x 4.500
165,1 x 114,3
6.500 x 5.500
165,1 x 139,7
6.625 x 2.375
168,3 x 60,3
6.625 x 2.875
168,3 x 73,0
6.625 x 3.000
168,3 x 76,1
6.625 x 3.500
168,3 x 88,9
6.625 x 4.500
168,3 x 114,3
6.625 x 5.500
168,3 x 139,7
6.625 x 5.563
168,3 x 141,3
8.625 x 2.875
219,1 x 73,0
8.625 x 3.500
219,1 x 88,9
8.625 x 4.500
219,1 x 114,3
8.625 x 5.500
219,1 x 139,7
8.625 x 5.563
219,1 x 141,3
8.625 x 6.500
219,1 x 165,1
8.625 x 6.625
219,1 x 168,3
10.750 x 4.500
273,0 x 114,3
10.750 x 5.563
273,0 x 141,3
10.750 x 6.500
273,0 x 165,1
10.750 x 6.625
273,0 x 168,3
10.750 x 8.625
273,0 x 219,1
200 x 150 ◗
8x6
200 x 150 ◗
10 x 4
250 x 100 ◗
10 x 5
250 x 125 ◗
10 x 165,1mm
250 x 150 ◗
10 x 6
250 x 150 ◗
10 x 8
250 x 200 ◗
54
Figure 250 - Cast
Approx.
E to E
Weight
Inches
Lbs.
mm
kg
3.50
4.4
88,9
2,0
—
—
—
—
—
—
—
—
3.50
4.2
88,9
1,9
3.50
4.4
88,9
2,0
4.00
5.5
101,6
2,5
4.00
6.0
101,6
2,7
4.00
5.6
101,6
2,5
4.00
5.3
101,6
2,4
4.00
5.6
101,6
2,5
4.00
6.1
101,6
2,7
4.00
5.8
101,6
2,6
4.00
6.0
101,6
2,7
4.00
6.3
101,6
2,3
4.00
6.2
101,6
2,8
—
—
—
—
5.00
11.5
127,0
5,2
5.00
10.7
127,0
4,9
5.00
10.0
127,0
4,5
5.00
10.8
127,0
4,9
5.00
11.0
127,0
5,0
5.00
11.3
127,0
5,1
—
—
—
—
—
—
—
—
6.00
17.8
152,4
8,0
6.00
16.3
152,4
7,4
6.00
18.3
152,4
8,3
Figure 350 - Fabricated
Approx.
E to E
Weight
Inches
Lbs.
mm
kg
—
—
—
—
3.50
4.6
88,9
2,1
3.50
4.5
88,9
2,0
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
5.00
12.1
127,0
5,5
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
6.00
20.5
152,4
9,3
6.00
20.1
152,4
9,1
—
—
—
—
—
—
—
—
—
—
—
—
www.grinnell.com
GROOVED FITTINGS
Figures 250 & 350 Concentric Reducers
(Page 3 of 3)
Nominal
Inches
mm
O.D.
Inches
mm
12 x 4
300 x 100 ◗
12 x 6
300 x 150 ◗
12 x 8
300 x 200 ◗
12 x 10
300 x 250 ◗
14 x 6
350 x 150
14 x 8
350 x 200
14 x 10
350 x 250
14 x 12
350 x 300
16 x 8
400 x 200
16 x 10
400 x 250
16 x 12
400 x 300
16 x 14
400 x 350
18 x 12
450 x 300
18 x 14
450 x 350
18 x 16
450 x 400
20 x 10
500 x 250
20 x 12
500 x 300
20 x 14
500 x 350
20 x 16
500 x 400
20 x 18
500 x 450
24 x 10
600 x 250
24 x 12
600 x 300
24 x 14
600 x 350
24 x 16
600 x 400
24 x 18
600 x 450
24 x 20
600 x 500
12.750 x 4.500
323,9 x 114,3
12.750 x 6.625
323,9 x 168,3
12.750 x 8.625
323,9 x 219,1
12.750 x 10.750
323,9 x 273,0
14.000 x 6.625
355,6 x 168,3
14.000 x 8.625
355,6 x 219,1
14.000 x 10.750
355,6 x 273,0
14.000 x 12.750
355,6 x 323,9
16.000 x 8.625
406,4 x 219,1
16.000 x 10.750
406,4 x 273,0
16.000 x 12.750
406,4 x 323,9
16.000 x 14.000
406,4 x 355,6
18.000 x 12.750
457,2 x 323,9
18.000 x 14.000
457,2 x 355,6
18.000 x 16.000
457,2 x 406,4
20.000 x 10.750
508,0 x 273,0
20.000 x 12.750
508,0 x 323,9
20.000 x 14.000
508,0 x 355,6
20.000 x 16.000
508,0 x 406,4
20.000 x 18.000
508,0 x 457,2
24.000 x 10.750
609,6 x 273,0
24.000 x 12.750
609,6 x 323,9
24.000 x 14.000
609,6 x 355,6
24.000 x 16.000
609,6 x 406,4
24.000 x 18.000
609,6 x 457,2
24.000 x 20.000
609,6 x 508,0
Figure 250 - Cast
Approx.
E to E
Weight
Inches
Lbs.
mm
kg
7.00
23.0
177,8
10,4
7.00
23.6
177,8
10,7
7.00
25.2
177,8
11,4
7.00
28.2
177,8
12,8
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Figure 350 - Fabricated
Approx.
E to E
Weight
Inches
Lbs.
mm
kg
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
13.0
54.3
330,2
24,6
13.0
54.5
330,2
24,7
13.0
55.8
330,2
25,3
13.0
57.3
330,2
26,0
14.0
65.4
355,6
29,7
14.0
66.7
355,6
30,2
14.0
68.1
355,6
30,9
14.0
71.0
355,6
32,2
15.0
83.6
381,0
37,9
15.0
86.2
381,0
39,1
15.0
87.2
381,0
39,6
20.0
124.7
508,0
56,6
20.0
124.7
508,0
56,6
20.0
129.0
508,0
58,5
20.0
131.1
508,0
59,5
20.0
133.4
508,0
60,5
20.0
149.1
508,0
67,6
20.0
150.4
508,0
68,2
20.0
151.6
508,0
68,8
20.0
152.8
508,0
69,3
20.0
154.1
508,0
69,9
20.0
155.5
508,0
70,5
Tech Data Sheet: G180
GROOVED FITTINGS
Pipe Size
E to E
Figure 250
Cast Concentric
Reducer
E to E
Figure 350
Fabricated Concentric
Reducer
◗ Sizes are available to JIS standards. Contact GRINNELL Mechanical Products for details.
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
Refer to back cover for country-specific customer care numbers.
55
GROOVED FITTINGS
Figures 251 & 351 Eccentric Reducers
(Page 1 of 3)
GROOVED FITTINGS
Tech Data Sheet: G180
Figure 251
Cast Eccentric Reducer
Figure 351
Fabricated Eccentric Reducer
(Segment Welded)
Pipe Size
E to E
Figure 251
Cast Eccentric Reducer
E to E
Figure 351
Fabricated Eccentric Reducer
(Segment Welded)
56
Nominal
Inches
mm
O.D.
Inches
mm
11 ⁄ 2 x 1
40 x 25
11 ⁄ 2 x 11 ⁄ 4
40 x 32
2x1
50 x 25
2 x 11 ⁄ 4
50 x 32
2 x 11 ⁄ 2
50 x 40
21 ⁄ 2 x 1
65 x 25
2 1 ⁄ 2 x 11 ⁄ 4
65 x 32
2 1 ⁄ 2 x 11 ⁄ 2
65 x 40
21 ⁄ 2 x 2
65 x 50
3x1
80 x 25
3 x 11 ⁄ 4
80 x 32
3 x 11 ⁄ 2
80 x 40
3x2
80 x 50
3 x 21 ⁄ 2
80 x 65
4x1
100 x 25
4 x 11 ⁄ 4
100 x 32
4 x 11 ⁄ 2
100 x 40
4x2
100 x 50
4 x 21 ⁄ 2
100 x 65
4x3
100 x 80
5x2
125 x 50
1.900 x 1.315
48,3 x 33,4
1.900 x 1.660
48,3 x 42,4
2.375 x 1.315
60,3 x 33,4
2.375 x 1.660
60,3 x 42,4
2.375 x 1.900
60,3 x 48,3
2.875 x 1.315
73,0 x 33,4
2.875 x 1.660
73,0 x 42,4
2.875 x 1.900
73,0 x 48,3
2.875 x 2.375
73,0 x 60,3
3.500 x 1.315
88,9 x 33,4
3.500 x 1.660
88,9 x 42,4
3.500 x 1.900
88,9 x 48,3
3.500 x 2.375
88,9 x 60,3
3.500 x 2.875
88,9 x 73,0
4.500 x 1.315
114,3 x 33,4
4.500 x 1.660
114,3 x 42,4
4.500 x 1.900
114,3 x 48,3
4.500 x 2.375
114,3 x 60,3
4.500 x 2.875
114,3 x 73,0
4.500 x 3.500
114,3 x 88,9
5.563 x 2.375
141,3 x 60,3
Figure 251 - Cast
Approx.
E to E
Weight
Inches
Lbs.
mm
kg
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
3.5
2.0
88,9
0,9
3.5
2.2
88,9
1,0
—
—
—
—
—
—
—
—
—
—
—
—
4.0
3.0
101,6
1,4
4.0
3.1
101,6
1,4
4.0
3.3
101,6
1,5
—
—
—
—
Figure 351 - Fabricated
Approx.
E to E
Weight
Inches
Lbs.
mm
kg
8.5
1.9
215,9
0,9
8.5
2.2
215,9
1,0
9.0
2.2
223,6
1,0
9.0
2.4
228,6
1,1
9.0
2.5
228,6
1,1
9.5
3.2
241,3
1,5
9.5
3.4
241,3
1,5
9.5
3.6
241,3
1,6
9.5
4.0
241,3
1,8
9.5
4.0
241,3
1,8
9.5
4.3
241,3
2,0
9.5
4.5
241,3
2,0
—
—
—
—
—
—
—
—
10.0
5.9
254,0
2,7
10.0
6.3
254,0
2,9
10.0
6.4
254,0
2,9
—
—
—
—
—
—
—
—
—
—
—
—
11.0
9.3
279,4
4,2
www.grinnell.com
GROOVED FITTINGS
Figures 251 & 351 Eccentric Reducers
Nominal
Inches
mm
O.D.
Inches
mm
5 x 21 ⁄ 2
125 x 65
5x3
125 x 80
5x4
125 x 100
165,1mm x 3
150 x 80
165,1mm x 4
150 x 100
6x2
150 x 50
6 x 21 ⁄ 2
150 x 65
6x3
150 x 80
6x4
150 x 100
6x5
150 x 125
8x3
200 x 80
8x4
200 x 100
8x5
200 x 125
8x6
200 x 150
10 x 4
250 x 100
10 x 5
250 x 125
10 x 6
250 x 150
10 x 8
250 x 200
12 x 4
300 x 100
12 x 6
300 x 150
12 x 8
300 x 200
12 x 10
300 x 250
14 x 6
350 x 150
14 x 8
350 x 200
14 x 10
350 x 250
14 x 12
350 x 300
5.563 x 2.875
141,3 x 73,0
5.563 x 3.500
141,3 x 88,9
5.563 x 4.500
141,3 x 114,3
6.500 x 3.500
165,1 x 88,9
6.500 x 4.500
165,1 x 114,3
6.625 x 2.375
168,3 x 60,3
6.625 x 2.875
168,3 x 73,0
6.625 x 3.500
168,3 x 88,9
6.625 x 4.500
168,3 x 114,3
6.625 x 5.563
168,3 x 141,3
8.625 x 3.500
219,1 x 88,9
8.625 x 4.500
219,1 x 114,3
8.625 x 5.563
219,1 x 141,3
8.625 x 6.625
219,1 x 168,3
10.750 x 4.500
273,0 x 114,3
10.750 x 5.563
273,0 x 141,3
10.750 x 6.625
273,0 x 168,3
10.750 x 8.625
273,0 x 219,1
12.750 x 4.500
323,9 x 114,3
12.750 x 6.625
323,9 x 168,3
12.750 x 8.625
323,9 x 219,1
12.750 x 10.750
323,9 x 273,0
14.000 x 6.625
355,6 x 168,3
14.000 x 8.625
355,6 x 219,1
14.000 x 10.750
355,6 x 273,0
14.000 x 12.750
355,6 x 323,9
Figure 251 - Cast
Approx.
E to E
Weight
Inches
Lbs.
mm
kg
—
—
—
—
—
—
—
—
5.0
5.7
127,5
2,6
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
5.5
7.4
139,7
3,4
5.5
7.5
139,7
3,4
5.5
8.1
139,7
3,7
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Figure 351 - Fabricated
Approx.
E to E
Weight
Inches
Lbs.
mm
kg
11.0
9.9
279,4
4,5
11.0
10.7
279,4
4,9
—
—
—
—
11.5
13.6
292,1
6,2
11.5
14.9
292,1
6,8
11.5
12.2
292,1
5,5
11.5
12.8
292,1
5,8
—
—
—
—
—
—
—
—
—
—
—
—
12.0
17.9
304,8
8,1
12.0
19.7
304,8
9,8
12.0
21.4
304,8
9,7
12.0
23.2
304,8
10,5
13.0
29.7
330,2
13,5
13.0
31.7
330,2
14,4
13.0
34.0
330,2
15,4
13.0
34.4
330,2
15,6
14.0
44.8
355,6
20,3
14.0
45.2
355,6
20,5
14.0
47.7
355,6
21,6
14.0
52.0
355,6
23,6
19.0
78.0
482,6
35,4
19.0
80.0
482,6
36,3
19.0
84.0
482,6
38,1
19.0
88.0
482,6
39,9
Refer to back cover for country-specific customer care numbers.
(Page 2 of 3)
Tech Data Sheet: G180
GROOVED FITTINGS
Pipe Size
E to E
Figure 251
Cast Eccentric Reducer
E to E
Figure 351
Fabricated Eccentric Reducer
(Segment Welded)
57
GROOVED FITTINGS
Figures 251 & 351 Eccentric Reducers
(Page 3 of 3)
GROOVED FITTINGS
Tech Data Sheet: G180
Pipe Size
E to E
Figure 251
Cast Eccentric Reducer
E to E
Figure 351
Fabricated Eccentric Reducer
(Segment Welded)
Nominal
Inches
mm
O.D.
Inches
mm
16 x 8
400 x 200
16 x 10
400 x 250
16 x 12
400 x 300
16 x 14
400 x 350
18 x 10
450 x 250
18 x 12
450 x 300
18 x 14
450 x 350
18 x 16
450 x 400
20 x 10
500 x 250
20 x 12
500 x 300
20 x 14
500 x 350
20 x 16
500 x 400
20 x 18
500 x 450
24 x 10
600 x 250
24 x 12
600 x 300
24 x 14
600 x 350
24 x 16
600 x 400
24 x 18
600 x 450
24 x 20
600 x 500
16.000 x 8.625
406,4 x 219,1
16.000 x 10.750
406,4 x 273,0
16.000 x 12.750
406,4 x 323,9
16.000 x 14.000
406,4 x 355,6
18.000 x 10.750
457,2 x 273,1
18.000 x 12.750
457,2 x 323,9
18.000 x 14.000
457,2 x 355,6
18.000 x 16.000
457,2 x 406,4
20.000 x 10.750
508,0 x 273,0
20.000 x 12.750
508,0 x 323,9
20.000 x 14.000
508,0 x 355,6
20.000 x 16.000
508,0 x 406,4
20.000 x 18.000
508,0 x 457,2
24.000 x 10.750
609,6 x 273,0
24.000 x 12.750
609,6 x 323,9
24.000 x 14.000
609,6 x 355,6
24.000 x 16.000
609,6 x 406,4
24.000 x 18.000
609,6 x 457,2
24.000 x 20.000
609,6 x 508,0
Figure 251 - Cast
Approx.
E to E
Weight
Inches
Lbs.
mm
kg
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Figure 351 - Fabricated
Approx.
E to E
Weight
Inches
Lbs.
mm
kg
20.0
91.0
508,0
41,3
20.0
96.0
508,0
43,5
20.0
99.0
508,0
44,9
20.0
104.0
508,0
47,2
21.0
110.0
533,0
49,9
21.0
113.0
533,0
51,3
21.0
117.0
533,0
53,1
21.0
121.0
533,0
54,9
26.0
145.0
660,4
65,8
26.0
149.0
660,4
67,6
26.0
152.0
660,4
68,9
26.0
156.0
660,4
70,8
26.0
160.0
660,4
72,6
26.0
147.0
660,4
78,9
26.0
179.0
660,4
81,2
26.0
184.0
660,4
83,5
26.0
189.0
660,4
85,7
26.0
194.0
660,4
88,0
26.0
199.0
660,4
90,3
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
58
www.grinnell.com
GROOVED FITTINGS
Figure 372 Concentric Reducers
(Small End Male Thread)
GROOVED FITTINGS
Tech Data Sheet: G180
E to E
Pipe Size
Nominal
Inches
mm
11 ⁄ 2 x 1
40 x 25
2 x 3 ⁄4
50 x 20
2x1
50 x 25
2 x 11 ⁄ 4
50 x 32
2 x 11 ⁄ 2
50 x 40
2 1 ⁄ 2 x 11 ⁄ 4
65 x 32
2 1 ⁄ 2 x 11 ⁄ 2
65 x 40
21 ⁄ 2 x 2
65 x 50
3x1
80 x 25
3 x 11 ⁄ 2
80 x 40
3x2
80 x 50
3 x 21 ⁄ 2
80 x 65
31 ⁄ 2 x 3
90 x 80
O.D.
Inches
mm
1.900 x 1.315
48,3 x 33,7
2.375 x 1.050
60,3 x 26,7
2.375 x 1.315
60,3 x 33,7
2.375 x 1.660
60,3 x 42,4
2.375 x 1.900
60,3 x 48,3
2.875 x 1.660
73,0 x 42,4
2.875 x 1.900
73,0 x 48,3
2.875 x 2.375
73,0 x 60,3
3.500 x 1.315
88,9 x 33,7
3.500 x 1.900
88,9 x 48,3
3.500 x 2.375
88,9 x 60,3
3.500 x 2.875
88,9 x 73,0
4.000 x 3.500
101,6 x 88,9
E to E
Inches
mm
Approx.
Weight
Lbs.
kg
2.50
63,5
2.50
63,5
2.50
63,5
2.50
63,5
2.50
63,5
2.50
63,5
2.50
63,5
2.50
63,5
2.50
63,5
2.50
63,5
2.50
63,5
2.50
63,5
2.50
63,5
0.6
0,3
1.0
0,5
0.8
0,4
0.8
0,4
0.8
0,4
1.0
0,5
1.3
0,6
1.2
0,5
1.3
0,6
1.3
0,6
1.3
0,6
1.5
0,7
1.5
0,7
Pipe Size
Nominal
Inches
mm
4x1
100 x 25
4 x 11 ⁄ 2
100 x 40
4x2
100 x 50
4 x 21 ⁄ 2
100 x 65
4x3
100 x 80
5x4
125 x 100
6x1
150 x 25
6x2
150 x 50
6x3
150 x 80
6x4
150 x 100
6x5
150 x 125
O.D.
Inches
mm
4.500 x 1.315
114,3 x 33,4
4.500 x 1.900
114,3 x 48,3
4.500 x 2.375
114,3 x 60,3
4.500 x 2.875
114,3 x 73,0
4.500 x 3.500
114,3 x 88,9
5.563 x 4.500
141,3 x 114,3
6.625 x 1.315
168,3 x 33,4
6.625 x 2.375
168,3 x 60,3
6.625 x 3.500
168,3 x 88,9
6.625 x 4.500
168,3 x 114,3
6.625 x 5.563
168,3 x 141,3
E to E
Inches
mm
Approx.
Weight
Lbs.
kg
3.00
76,2
3.00
76,2
3.00
76,2
3.00
76,2
3.00
76,2
3.50
88,9
4.00
101,6
4.00
101,6
4.00
101,6
4.00
101,6
4.00
101,6
1.8
0,8
2.3
1,0
2.3
1,0
2.3
1,0
2.6
1,2
4.5
2,0
5.2
2,4
6.0
2,7
6.0
2,7
5.9
2,7
5.8
2,6
Available with BSP threads. Contact GRINNELL Mechanical Products
for details.
For information on larger sizes, European sizes or other alternative
sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
Refer to back cover for country-specific customer care numbers.
59
GROOVED FITTINGS
Figure 395 Hose Adapter Nipples
(Groove x Hose)
Pipe Size
GROOVED FITTINGS
Tech Data Sheet: G180
E to E
Nominal
Inches
mm
1
25
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
3
80
4
100
5
125
6
150
8
200
10
250
12
300
O.D.
Inches
mm
1.315
33,4
1.600
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.500
88,9
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
E to E
Inches
mm
Approx. Weight
Lbs.
kg
3.25
82,6
3.63
92,1
4.00
101,6
4.63
117,5
5.50
139,7
6.00
152,4
7.25
184,2
9.75
247,7
11.00
279,4
12.50
317,5
14.00
355,6
16.00
406,4
0.4
0,2
0.7
0,3
0.8
0,4
1.3
0,6
2.1
1,0
3.3
1,5
5.5
2,5
8.1
3,7
13.2
6,0
24.0
10,9
29.0
13,2
46.0
20,9
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
Figure 380 Female Thread Adapters
(Groove x Female Thread)
Tech Data Sheet: G180
Pipe Size
E to E
Nominal
Inches
mm
1
25
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
O.D.
Inches
mm
1.315
33,4
1.600
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
E to E
Inches
mm
Approx. Weight
Lbs.
kg
2.063
52,4
2.312
58,7
2.312
58,7
2.500
63,5
2.500
63,5
2.500
63,5
2.750
69,9
3.250
82,5
0.7
0,3
1.4
0,6
1.5
0,7
1.6
0,7
1.9
0,9
1.9
0,9
2.5
1,1
4.5
2,0
Available with BSP threads. Contact GRINNELL Mechanical Products for details.
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
60
www.grinnell.com
GROOVED FITTINGS
Figures 391, 392 & 393 Adapter Nipples
GROOVED FITTINGS
Tech Data Sheet: G180
Figure 391
Fabricated Adapter Nipple
Groove x Male Thread
E to E
Figure 392
Fabricated Adapter Nipple
Groove x Groove
Pipe Size
Nominal
Inches
mm
O.D.
Inches
mm
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
3
80
4
100
5
125
6
150
8
200
10
250
12
300
1.600
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.500
88,9
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
E to E
Inches
mm
Approx. Weight
Lbs.
kg
4.00
101,6
4.00
101,6
4.00
101,6
4.00
101,6
4.00
101,6
6.00
154,4
6.00
154,4
6.00
154,4
6.00
154,4
8.00
203,2
8.00
203,2
0.8
0,4
0.9
0,4
1.2
0,5
1.9
0,9
2.5
1,1
5.4
2,4
7.3
3,3
9.4
4,3
14.2
6,4
27.0
12,2
33.0
15,0
E to E
Figure 393
Fabricated Adapter Nipple
Groove x Plain
E to E
For information on larger sizes, contact GRINNELL
Mechanical Products.
See page 37 for fitting specifications.
Refer to back cover for country-specific customer care numbers.
61
GROOVED FITTINGS
Figures 397, 398 & 399 Concentric Swaged Nipples
Tech Data Sheet: G180
GROOVED FITTINGS
Figure 397
Fabricated Swaged Nipple
Groove x Groove
Figure 398
Fabricated Swaged Nipple
Groove x Male Thread
E to E
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
2x1
2.375 x 1.315
50 x 25
60,3 x 33,4
2 x 11 ⁄ 4
2.375 x 1.660
50 x 32
60,3 x 42,4
2.375 x 1.900
2 x 11 ⁄ 2
50 x 40
60,3 x 48,3
21 ⁄ 2 x 1
2.875 x 1.315
65 x 25
73,0 x 33,4
2 1 ⁄ 2 x 11 ⁄ 4
2.875 x 1.660
65 x 32
73,0 x 42,4
2 1 ⁄ 2 x 11 ⁄ 2
2.875 x 1.900
65 x 40
73,0 x 48,3
21 ⁄ 2 x 2
2.875 x 2.375
65 x 50
73,0 x 60,3
3x1
3.500 x 1.315
80 x 25
88,9 x 33,4
3 x 11 ⁄ 4
3.500 x 1.600
80 x 32
88,9 x 42,4
3 x 11 ⁄ 2
3.500 x 1.900
80 x 40
88,9 x 48,3
3x2
3.500 x 2.375
80 x 50
88,9 x 60,3
3.500 x 2.875
3 x 21 ⁄ 2
80 x 65
88,9 x 73,0
4x1
4.500 x 1.315
100 x 25
114,3 x 33,4
4 x 11 ⁄ 4
4.500 x 1.660
100 x 32
114,3 x 42,4
4 x 11 ⁄ 2
4.500 x 1.900
100 x 40
114,3 x 48,3
4x2
4.500 x 2.375
100 x 50
114,3 x 60,3
4.500 x 2.875
4 x 21 ⁄ 2
100 x 65
114,3 x 73,0
62
Figure 399
Fabricated Swaged Nipple
Groove x Plain End
E to E
E to E
E to E
Inches
mm
Approx.
Weight
Lbs.
kg
6.50
165,1
6.50
165,1
6.50
165,1
7.00
177,8
7.00
177,8
7.00
177,8
7.00
177,8
8.00
203,2
8.00
203,2
8.00
203,2
8.00
203,2
8.00
203,2
9.00
228,6
9.00
228,6
9.00
228,6
9.00
228,6
9.00
228,6
2.0
0,9
2.0
0,9
2.0
0,9
3.5
1,6
3.5
1,6
3.5
1,6
3.5
1,6
5.0
2,3
5.0
2,3
5.0
2,3
5.0
2,3
5.0
2,3
8.0
3,6
8.0
3,6
8.0
3,6
8.0
3,6
8.0
3,6
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
4x3
4.500 x 3.500
100 x 80
114,3 x 88,9
5 x 11 ⁄ 2
5.563 x 1.900
125 x 40
141,3 x 48,3
5x2
5.563 x 2.375
125 x 50
141,3 x 60,3
5.563 x 2.875
5 x 21 ⁄ 2
125 x 65
141,3 x 73,0
5x3
5.563 x 3.500
125 x 80
141,3 x 88,9
5x4
5.563 x 4.500
125 x 100
141,3 x 114,3
6x1
6.625 x 1.315
150 x 25
168,3 x 33,4
6 x 11 ⁄ 4
6.625 x 1.660
150 x 32
168,3 x 42,4
6 x 11 ⁄ 2
6.625 x 1.900
150 x 40
168,3 x 48,3
6x2
6.625 x 2.375
150 x 50
168,3 x 60,3
6 x 21 ⁄ 2
6.625 x 2.875
150 x 65
168,3 x 73,0
6x3
6.625 x 3.500
150 x 80
168,3 x 88,9
6x4
6.625 x 4.500
150 x 100
168,3 x 114,3
6x5
6.625 x 5.563
150 x 125
168,3 x 141,3
8x6
8.625 x 6.625
200 x 150
219,1 x 168,3
E to E
Inches
mm
Approx.
Weight
Lbs.
kg
9.00
228,6
11.00
279,4
11.00
279,4
11.00
279,4
11.00
279,4
11.00
279,4
12.00
304,8
12.00
304,8
12.00
304,8
12.00
304,8
12.00
304,8
12.00
304,8
12.00
304,8
12.00
304,8
◆
-
8.0
3,6
12.0
5,4
12.0
5,4
12.0
5,4
12.0
5,4
12.0
5,4
19.0
8,6
19.0
8,6
19.0
8,6
19.0
8,6
19.0
8,6
19.0
8,6
19.0
8,6
19.0
8,6
◆
-
◆ These sizes are available. Contact GRINNELL Mechanical Products
for details.
For information on larger sizes, contact GRINNELL
Mechanical Products.
See page 37 for fitting specifications.
www.grinnell.com
GROOVED FITTINGS
Figure 324 90° True Wyes
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
11 ⁄ 4
1.660
32
42,4
1.900
11 ⁄ 2
40
48,3
2
2.375
50
60,3
21 ⁄ 2
2.875
65
73,0
76,1mm
3.000
65
76,1
3
3.500
80
88,9
4
4.500
100
114,3
139,7mm
5.500
125
139,7
5
5.563
125
141,3
165,1mm
6.500
150
165,1
6
6.625
150
168,3
8
8.625
200
219,1
10
10.750
250
273,0
12
12.750
300
323,9
14
14.000
350
355,6
16
16.000
400
406,4
18
18.000
450
457,2
20
20.000
500
508,0
24
24.000
600
609,6
C to LE
Inches
mm
C to SE
Inches
mm
Approx.
Weight
Lbs.
kg
2.75
69,9
2.75
69,9
3.25
82,6
3.75
95,3
3.75
95,3
4.25
108,0
5.00
127,0
5.50
139,7
5.50
139,7
6.50
165,1
6.50
165,1
7.75
196,9
9.00
228,6
10.00
254,0
11.00
279,4
12.00
304,8
15.50
393,7
17.25
438,2
20.00
508,0
2.50
63,5
2.75
69,9
2.75
69,9
3.00
76,2
3.00
76,2
3.25
82,6
3.75
95,3
4.00
101,6
4.00
101,6
4.50
114,3
4.50
114,3
6.00
152,4
6.50
165,71
7.00
177,8
7.50
190,5
8.00
203,2
8.50
215,9
9.00
238,6
10.00
254,0
1.4
0,6
1.7
0,8
2.5
1,1
4.4
2,0
4.4
2,0
6.4
2,9
10.5
4,8
15.2
6,9
15.2
6,9
22.9
10,4
22.9
10,4
41.9
19,0
66.2
30,0
87.7
39,8
105.3
47,8
129.1
58,6
184.4
83,6
225.8
102,4
308.5
139,9
GROOVED FITTINGS
Tech Data Sheet: G180
C to LE
C to SE
For information on larger sizes, European sizes or other alternative sizes, contact
GRINNELL Mechanical Products.
See page 37 for fitting specifications.
Refer to back cover for country-specific customer care numbers.
63
GROOVED FITTINGS
Figure 314 45° Laterals
GROOVED FITTINGS
Tech Data Sheet: G180
C to LE
C to SE
C to LE
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
11 ⁄ 4
1.660
32
42,4
11 ⁄ 2
1.900
40
48,3
2
2.375
50
60,3
21 ⁄ 2
2.875
65
73,0
76,1mm
3.000
65
76,1
3
3.500
80
88,9
4
4.500
100
114,3
139,7mm
5.500
125
139,7
5
5.563
125
141,3
165,1mm
6.500
150
165,1
6
6.625
150
168,3
8
8.625
200
219,1
10
10.750
250
273,0
12
12.750
300
323,9
14
14.000
350
355,6
16
16.000
400
406,4
18
18.000
450
457,2
20
20.000
500
508,0
24
24.000
600
609,6
C to LE
Inches
mm
C to SE
Inches
mm
Approx.
Weight
Lbs.
kg
5.75
146,1
6.25
158,8
7.00
177,8
7.75
196,9
7.75
196,9
8.50
215,9
10.50
266,7
12.50
317,5
12.50
317,5
14.00
355,6
14.00
355,6
18.00
457,2
20.50
520,7
23.00
584,2
26.50
673,1
29.00
736,6
32.00
812,8
35.00
889,0
40.00
1016,0
2.50
63,5
2.75
69,9
2.75
69,9
3.00
76,2
3.00
76,2
3.25
82,6
3.75
95,3
4.00
102,0
4.00
101,6
4.50
114,3
4.50
114,3
6.00
152,4
6.50
165,71
7.00
177,8
7.50
190,5
8.00
203,2
8.50
215,9
9.00
238,6
10.00
254,0
1.4
0,6
1.7
0,8
2.5
1,1
4.4
2,0
4.4
2,0
6.4
2,9
10.5
4,8
30.0
13,6
15.2
6,9
22.9
10,4
22.9
10,4
41.9
19,0
66.2
30,0
87.7
39,8
105.3
47,8
129.1
58,6
184.4
83,6
225.8
102,4
308.5
139,9
For information on larger sizes, contact GRINNELL
Mechanical Products.
See page 37 for fitting specifications.
64
www.grinnell.com
GROOVED FITTINGS
Figure 325 45° Reducing Laterals
(Page 1 of 3)
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
3x3x2
3.500 x 3.500 x 2.375
80 x 80 x 50
88,9 x 88,9 x 60,3
3.500 x 3.500 x 2.875
3 x 3 x 21 ⁄ 2
80 x 80 x 65
88,9 x 88,9 x 73,0
3 x 3 x 76,1mm
3.500 x 3.500 x 3.000
80 x 80 x 76,1
88,9 x 88,9 x 76,1
4x4x2
4.500 x 4.500 x 2.375
100 x 100 x 50
114,3 x 114,3 x 60,3
4 x 4 x 21 ⁄ 2
4.500 x 4.500 x 2.875
100 x 100 x 65
114,3 x 114,3 x 73,0
4 x 4 x 76,1mm
4.500 x 4.500 x 3.000
100 x 100 x 65
114,3 x 114,3 x 76,1
4x4x3
4.500 x 4.500 x 3.500
100 x 100 x 80
114,3 x 114,3 x 88,9
139,7 x 139,7mm x 2
5.500 x 5.500 x 2.375
125 x 125 x 50
139,7 x 139,7 x 60,3
139,7 x 139,7mm x 3
5.500 x 5.500 x 3.500
125 x 125 x 80
139,7 x 139,7 x 88,9
139,7 x 139,7mm x 4
5.500 x 5.500 x 4.500
125 x 125 x 100
139,7 x 139,7 x 114,3
5x5x2
5.563 x 5.563 x 2.375
125 x 125 x 50
141,3 x 141,3 x 60,3
5.563 x 5.563 x 2.875
5 x 5 x 21 ⁄ 2
125 x 125 x 65
141,3 x 141,3 x 73,0
5x5x3
5.563 x 5.563 x 3.500
125 x 125 x 80
141,3 x 141,3 x 88,9
5x5x4
5.563 x 5.563 x 4.500
125 x 125 x 100
141,3 x 141,3 x 114,3
165,1 x 165,1mm x 2
6.500 x 6.500 x 2.375
150 x 150 x 50
165,1 x 165,1 x 60,3
165,1 x 165,1mm x 3
6.500 x 6.500 x 3.500
150 x 150 x 80
165,1 x 165,1 x 88,9
165,1 x 165,1mm x 4
6.500 x 6.500 x 4.500
150 x 150 x 100
165,1 x 165,1 x 114,3
165,1 x 165,1 x 139,7mm
6.500 x 6.500 x 5.500
150 x 150 x 125
165,1 x 165,1 x 139,7
6x6x2
6.625 x 6.625 x 2.375
150 x 150 x 50
168,3 x 168,3 x 60,3
6 x 6 x 21 ⁄ 2
6.625 x 6.625 x 2.875
150 x 150 x 65
168,3 x 168,3 x 73,0
6x6x3
6.625 x 6.625 x 3.500
150 x 150 x 80
168,3 x 168,3 x 88,9
6x6x4
6.625 x 6.625 x 4.500
150 x 150 x 100
168,3 x 168,3 x 114,3
6 x 6 x 139,7mm
6.625 x 6.625 x 5.500
150 x 150 x 125
168,3 x 168,3 x 139,7
6x6x5
6.625 x 6.625 x 5.563
150 x 150 x 125
168,3 x 168,3 x 141,3
C to LE
Inches
mm
C to SE
Inches
mm
Approx.
Weight
Lbs.
kg
8.50
215,9
8.50
215,9
8.50
216,0
10.50
266,7
10.50
266,7
10.50
267,0
10.50
266,7
12.50
318,1
12.50
318,0
12.50
318,0
12.50
317,5
12.50
317,5
12.50
317,5
12.50
317,5
14.00
356,0
14.00
356,0
14.00
356,0
14.00
356,0
14.00
355,6
14.00
355,6
14.00
355,6
14.00
355,6
14.00
356,0
14.00
355,6
3.25
82,6
3.25
82,6
3.25
83,0
3.75
95,3
3.75
95,3
3.75
95,0
3.75
95,3
4.00
102,0
4.00
102,0
4.00
102,0
4.00
101,6
4.00
101,6
4.00
101,6
4.00
101,6
4.50
114,0
4.50
114,0
4.50
114,0
4.50
114,0
4.50
114,3
4.50
114,3
4.50
114,3
4.50
114,3
4.50
114,0
4.50
114,3
9.0
4,1
10.0
4,5
11.5
5,2
14.7
6,7
16.0
7,3
16.9
7,7
16.9
7,7
22.4
10,2
26.5
12,0
30.4
13,8
22.4
10,2
23.5
10,7
24.9
11,3
26.9
12,2
33.1
15,0
37.0
16,8
39.9
18,1
45.0
20,4
31.7
14,4
34.0
15,0
34.4
15,6
36.5
16,6
45.0
20,4
39.1
17,7
Refer to back cover for country-specific customer care numbers.
GROOVED FITTINGS
Tech Data Sheet: G180
C to LE
C to LE
C to SE
65
GROOVED FITTINGS
Figure 325 45° Reducing Laterals
(Page 2 of 3)
GROOVED FITTINGS
Tech Data Sheet: G180
Pipe Size
C to LE
C to LE
C to SE
66
Nominal
Inches
mm
8x8x4
200 x 200 x 100
8 x 8 x 139,7mm
200 x 200 x 125
8x8x5
200 x 200 x 125
8x8x6
200 x 200 x 150
10 x 10 x 4
250 x 250 x 100
10 x 10 x 139,7mm
250 x 250 x 125
10 x 10 x 5
250 x 250 x 125
10 x 10 x 6
250 x 250 x 150
10 x 10 x 8
250 x 250 x 200
12 x 12 x 4
300 x 300 x 100
12 x 12 x 6
300 x 300 x 150
12 x 12 x 8
300 x 300 x 200
12 x 12 x 10
300 x 300 x 250
14 x 14 x 4
350 x 350 x 100
14 x 14 x 6
350 x 350 x 150
14 x 14 x 8
350 x 350 x 200
14 x 14 x 10
350 x 350 x 250
14 x 14 x 12
350 x 350 x 300
16 x 16 x 6
400 x 400 x 150
16 x 16 x 8
400 x 400 x 200
16 x 16 x 10
400 x 400 x 250
16 x 16 x 12
400 x 400 x 300
16 x 16 x 14
400 x 400 x 350
O.D.
Inches
mm
8.625 x 8.625 x 4.500
219,1 x 219,1 x 114,1
8.625 x 8.625 x 5.500
219,1 x 219,1 x 139,7
8.625 x 8.625 x 5.563
219,1 x 219,1 x 141,3
8.625 x 8.625 x 6.625
219,1 x 219,1 x 168,3
10.750 x 10.750 x 4.500
273,0 x 273,0 x 114,3
10.750 x 10.750 x 5.500
273,0 x 273,0 x 139,7
10.750 x 10.750 x 5.563
273,0 x 273,0 x 141,3
10.750 x 10.750 x 6.625
273,0 x 273,0 x 168,3
10.750 x 10.750 x 8.625
273,0 x 273,0 x 219,1
12.750 x 12.750 x 4.500
323,9 x 323,9 x 114,3
12.750 x 12.750 x 6.625
323,9 x 323,9 x 168,3
12.750 x 12.750 x 8.625
323,9 x 323,9 x 219,1
12.750 x 12.750 x 10.750
323,9 x 323,9 x 273,0
14.000 x 14.000 x 4.500
355,6 x 355,6 x 114,3
14.000 x 14.000 x 6.625
355,6 x 355,6 x 168,3
14.000 x 14.000 x 8.625
355,6 x 355,6 x 219,1
14.000 x 14.000 x 10.750
355,6 x 355,6 x 273,0
14.000 x 14.000 x 12.750
355,6 x 355,6 x 323,9
16.000 x 16.000 x 6.625
406,4 x 406,4 x 168,3
16.000 x 16.000 x 8.625
406,4 x 406,4 x 219,1
16.000 x 16.000 x 10.750
406,4 x 406,4 x 273,0
16.000 x 16.000 x 12.750
406,4 x 406,4 x 323,9
16.000 x 16.000 x 14.000
406,4 x 406,4 x 355,6
C to LE
Inches
mm
C to SE
Inches
mm
Approx.
Weight
Lbs.
kg
18.00
457,2
18.00
457,0
18.00
457,2
18.00
457,2
20.50
520,7
20.50
521,0
20.50
520,7
20.50
520,7
20.50
520,7
23.00
584,2
23.00
584,2
23.00
584,2
23.00
584,2
26.50
673,1
26.50
673,1
26.50
673,1
26.50
673,1
26.50
673,1
29.00
736,6
29.00
736,6
29.00
736,6
29.00
736,6
29.00
736,6
6.00
152,4
6.00
152,0
6.00
152,4
6.00
152,4
6.50
165,1
6.50
165,0
6.50
165,1
6.50
165,1
6.50
165,1
7.00
177,8
7.00
177,8
7.00
177,8
7.00
177,8
7.50
190,5
7.50
190,5
7.50
190,5
7.50
190,5
7.50
190,5
8.00
203,0
8.00
203,0
8.00
203,0
8.00
203,0
8.00
203,0
58.9
26,7
67.9
30,8
62.2
28,2
66.1
30,0
87.3
39,6
100.1
45,4
90.7
41,1
94.7
43,0
99.2
45,0
120.6
54,7
128.5
58,3
133.1
60,4
142.3
64,5
167.9
76,2
177.2
80,4
182.5
82,8
193.0
87,5
203.8
92,4
217.2
98,5
223.0
101,2
234.1
106,2
245.4
111,3
261.0
118,4
www.grinnell.com
GROOVED FITTINGS
Figure 325 45° Reducing Laterals
(Page 3 of 3)
Pipe Size
Nominal
Inches
mm
18 x 18 x 6
450 x 450 x 150
18 x 18 x 8
450 x 450 x 200
18 x 18 x 10
450 x 450 x 250
18 x 18 x 12
450 x 450 x 300
18 x 18 x 14
450 x 450 x 350
18 x 18 x 16
450 x 450 x 400
20 x 20 x 12
500 x 500 x 300
20 x 20 x 14
500 x 500 x 350
20 x 20 x 16
500 x 500 x 400
24 x 24 x 16
600 x 600 x 400
24 x 24 x 20
600 x 600 x 500
O.D.
Inches
mm
18.000 x 18.000 x 6.625
457,2 x 457,2 x 168,3
18.000 x 18.000 x 8.625
457,2 x 457,2 x 219,1
18.000 x 18.000 x 10.750
457,2 x 457,2 x 273,0
18.000 x 18.000 x 12.750
457,2 x 457,2 x 323,9
18.000 x 18.000 x 14.000
457,2 x 457,2 x 355,6
18.000 x 18.000 x 16.000
457,2 x 457,2 x 406,4
20.000 x 20.000 x 12.750
508,0 x 508,0 x 323,9
20.000 x 20.000 x 14.000
508,0 x 508,0 x 355,6
20.000 x 20.000 x 16.000
508,0 x 508,0 x 406,4
24.000 x 24.000 x 16.000
609,6 x 609,6 x 406,4
24.000 x 24.000 x 20.000
609,6 x 609,6 x 508,0
C to LE
Inches
mm
C to SE
Inches
mm
Approx.
Weight
Lbs.
kg
32.00
812,8
32.00
812,8
32.00
812,8
32.00
812,8
32.00
812,8
32.00
812,8
35.00
889,0
35.00
889,0
35.00
889,0
40.00
1016,0
40.00
1016,0
8.50
215,9
8.50
215,9
8.50
215,9
8.50
215,9
8.50
215,9
8.50
215,9
9.00
228,6
9.00
228,6
9.00
228,6
10.00
254,0
10.00
254,0
265.1
120,2
271.5
123,2
283.7
128,7
296.0
134,3
312.6
141,8
322.6
146,3
351.4
159,4
369.1
167,4
379.7
172,2
495.6
224,8
518.4
235,1
GROOVED FITTINGS
Tech Data Sheet: G180
C to LE
C to LE
C to SE
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
Refer to back cover for country-specific customer care numbers.
67
GROOVED FITTINGS
Figure 330 Tee Wyes
(Page 1 of 2)
GROOVED FITTINGS
Tech Data Sheet: G180
E1
E2
H
G
Pipe Size
Nominal
Inches
mm
2x2x2
50 x 50 x 50
21 ⁄ 2 x 21 ⁄ 2 x 21 ⁄ 2
65 x 65 x 65
3x3x3
80 x 80 x 80
4x4x3
100 x 100 x 80
4x4x4
100 x 100 x 100
5x5x3
125 x 125 x 80
5x5x4
125 x 125 x 100
5x5x5
125 x 125 x 125
6x6x3
150 x 150 x 80
6x6x4
150 x 150 x 100
6x6x5
150 x 150 x 125
6x6x6
150 x 150 x 150
8x8x3
200 x 200 x 80
8x8x4
200 x 200 x 100
8x8x5
200 x 200 x 125
68
O.D.
Inches
mm
2.375 x 2.375 x 2.375
60,3 x 60,3 x 60,3
2.875 x 2.875 x 2.875
73,0 x 73,0 x 73,0
3.500 x 3.500 x 3.500
88,9 x 88,9 x 88,9
4.500 x 4.500 x 3.500
114,3 x 114,3 x 88,9
4.500 x 4.500 x 4.500
114,3 x 114,3 x 114,3
5.563 x 5.563 x 3.500
141,3 x 141,3 x 88,9
5.563 x 5.563 x 4.500
141,3 x 141,3 x 114,3
5.563 x 5.563 x 5.563
141,3 x 141,3 x 141,3
6.625 x 6.625 x 3.500
168,3 x 168,3 x 88,9
6.625 x 6.625 x 4.500
168,3 x 168,3 x 114,3
6.625 x 6.625 x 5.563
168,3 x 168,3 x 141,3
6.625 x 6.625 x 6.625
168,3 x 168,3 x 168,3
8.625 x 8.625 x 3.500
219,1 x 219,1 x 88,9
8.625 x 8.625 x 4.500
219,1 x 219,1 x 114,3
8.625 x 8.625 x 5.563
219,1 x 219,1 x 141,3
G
Inches
mm
H
Inches
mm
E1
Inches
mm
E2
Inches
mm
Approx
Wt.
Lbs.
kg
2.75
69,9
3.00
76,2
3.25
82,6
3.75
95,3
3.75
95,3
4.00
101,6
4.00
101,6
4.00
101,6
4.50
114,3
4.50
114,3
4.50
114,3
4.50
114,3
6.00
152,4
6.00
152,4
6.00
152,4
7.00
177,8
7.75
196,9
8.50
215,9
10.50
266,7
10.50
266,7
12.50
317,5
12.50
317,5
12.50
317,5
14.00
355,6
14.00
355,6
14.00
355,6
14.00
355,6
18.00
457,2
18.00
457,2
18.00
457,2
9.00
228,6
10.50
266,7
11.50
292,1
12.88
327,2
13.63
346,2
14.25
362,0
15.13
384,3
16.13
409,7
15.31
388,9
16.25
412,8
17.25
438,2
18.25
463,6
18.19
462,0
19.00
482,6
20.00
508,0
7.37
187,2
8.84
224,5
9.31
236,5
10.17
258,3
11.87
301,5
13.25
336,6
13.63
346,1
14.00
355,6
14.81
376,2
15.25
387,4
15.63
396,9
16.00
406,4
19.18
487,2
19.50
495,3
19.87
504,7
5.7
2,6
10.2
4,6
14.4
6,5
20.5
9,3
24.6
11,2
28.4
12,9
32.8
14,9
38.8
17,6
37.9
17,2
42.5
19,3
48.5
22,0
56.3
25,5
67.3
30,5
72.3
32,8
78.8
35,7
www.grinnell.com
GROOVED FITTINGS
Figure 330 Tee Wyes
(Page 2 of 2)
GROOVED FITTINGS
Tech Data Sheet: G180
E1
E2
H
G
Pipe Size
Nominal
Inches
mm
8x8x6
200 x 200 x 150
8x8x8
200 x 200 x 200
10 x 10 x 3
250 x 250 x 80
10 x 10 x 4
250 x 250 x 100
10 x 10 x 5
250 x 250 x 125
10 x 10 x 6
250 x 250 x 150
10 x 10 x 8
250 x 250 x 200
10 x 10 x 10
250 x 250 x 250
12 x 12 x 3
300 x 300 x 80
12 x 12 x 4
300 x 300 x 100
12 x 12 x 6
300 x 300 x 150
12 x 12 x 8
300 x 300 x 200
12 x 12 x 10
300 x 300 x 250
12 x 12 x 12
300 x 300 x 300
O.D.
Inches
mm
8.625 x 8.625 x 6.625
219,1 x 219,1 x 168,3
8.625 x 8.625 x 8.625
219,1 x 219,1 x 219,1
10.750 x 10.750 x 3.500
273,0 x 273,0 x 88,9
10.750 x 10.750 x 4.500
273,0 x 273,0 x 114,3
10.750 x 10.750 x 5.563
273,0 x 273,0 x 141,3
10.750 x 10.750 x 6.625
273,0 x 273,0 x 168,3
10.750 x 10.750 x 8.625
273,0 x 273,0 x 219,1
10.750 x 10.750 x 10.750
273,0 x 273,0 x 273,0
12.750 x 12.750 x 3.500
323,9 x 323,9 x 88,9
12.750 x 12.750 x 4.500
323,9 x 323,9 x 114,3
12.750 x 12.750 x 6.625
323,9 x 323,9 x 168,3
12.750 x 12.750 x 8.625
323,9 x 323,9 x 219,1
12.750 x 12.750 x 10.750
323,9 x 323,9 x 273,0
12.750 x 12.750 x 12.750
323,9 x 323,9 x 323,9
G
Inches
mm
H
Inches
mm
E1
Inches
mm
E2
Inches
mm
Approx
Wt.
Lbs.
kg
6.00
152,4
6.00
152,4
6.50
165,1
6.50
165,1
6.50
165,1
6.50
165,1
6.50
165,1
6.50
165,1
7.00
177,8
7.00
177,8
7.00
177,8
7.00
177,8
7.00
177,8
7.00
177,8
18.00
457,2
18.00
457,2
20.50
520,7
20.50
520,7
20.50
520,7
20.50
520,7
20.50
520,7
20.50
520,7
23.00
584,2
23.00
584,2
23.00
584,2
23.00
584,2
23.00
584,2
23.00
584,2
21.13
536,7
23.25
590,6
19.88
505,0
20.75
527,1
21.88
555,8
22.88
581,2
27.25
692,2
27.25
692,2
20.75
527,1
21.50
546,1
23.75
603,3
26.00
660,4
28.00
711,2
31.00
787,4
20.37
517,4
21.25
539,8
21.38
543,1
21.75
552,5
22.25
565,2
22.63
574,7
25.75
654,1
24.38
619,1
22.75
577,9
23.00
584,2
24.00
609,6
25.00
635,0
25.75
654,1
27.50
698,5
87.4
39,6
109.0
49,4
101.7
46,1
106.9
48,5
113.8
51,6
122.1
55,4
151.1
68,5
175.1
79,4
134.5
61,0
139.4
63,2
154.5
70,0
175.8
79,7
205.4
93,2
240.1
108,9
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
Refer to back cover for country-specific customer care numbers.
69
GROOVED FITTINGS
Figure 331 Reducing Tee Wyes
GROOVED FITTINGS
Tech Data Sheet: G180
E1
E2
G
Pipe Size
Nominal
Inches
mm
4x3x3
100 x 80 x 80
4x3x4
100 x 80 x 100
5x3x3
125 x 80 x 80
5x3x5
125 x 80 x 125
5x4x3
125 x 100 x 80
5x4x4
125 x 100 x 100
6x4x6
150 x 100 x 150
6x5x3
150 x 125 x 80
6x5x4
150 x 125 x 100
8x6x4
200 x 150 x 100
8x6x8
200 x 150 x 200
O.D.
Inches
mm
4.500 x 3.500 x 3.500
114,3 x 88,9 x 88,9
4.500 x 3.500 x 4.500
114,3 x 88,9 x 114,3
5.563 x 3.500 x 3.500
141,3 x 88,9 x 88,9
5.563 x 3.500 x 5.563
141,3 x 88,9 x 141,3
5.563 x 4.500 x 3.500
141,3 x 114,3 x 88,9
5.563 x 4.500 x 4.500
141,3 x 114,3 x 114,3
6.625 x 4.500 x 6.625
168,3 x 114,3 x 168,3
6.625 x 5.563 x 3.500
168,3 x 141,3 x 88,9
6.625 x 5.563 x 4.500
168,3 x 141,3 x 114,3
8.625 x 6.625 x 4.500
219,1 x 168,3 x 114,3
8.625 x 6.625 x 8.625
219,1 x 168,3 x 219,1
H
G
Inches
mm
H
Inches
mm
E1
Inches
mm
E2
Inches
mm
Approx Wt.
Lbs.
kg
9.01
228,9
14.25
362,0
11.00
279,5
16.50
419,1
11.01
279,7
11.01
279,7
18.50
469,9
12.00
304,9
12.00
304,9
13.00
330,2
24.00
609,6
7.38
187,5
10.50
266,7
9.75
247,7
12.50
317,5
9.13
231,9
9.13
231,9
14.00
355,6
10.75
273,1
10.75
273,1
12.00
304,8
18.00
457,2
10.75
273,1
13.63
346,2
11.50
292,1
16.13
409,7
11.88
301,88
12.75
323,9
18.25
463,6
13.00
330,2
13.88
352,6
14.75
374,7
23.25
590,6
7.25
184,2
11.87
301,5
7.71
195,8
13.95
354,3
8.71
221,2
9.00
228,6
13.75
349,3
9.25
235,0
9.62
244,3
10.25
260,3
21.25
539,8
13.7
6,2
24.5
11,1
19.0
8,6
38.5
17,5
19.5
8,8
23.1
10,5
56.2
25,5
25.6
11,6
29.3
13,3
40.2
18,2
108.6
49,3
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
70
www.grinnell.com
GROOVED FITTINGS
Figures 227 & 327 Crosses
Pipe Size
Nominal
Inches
mm
O.D.
Inches
mm
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
8
200
10
250
12
300
14
350
16
400
18
450
20
500
24
600
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.563
141,3
6.500
165,1
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
14.000
355,6
16.000
406,4
18.000
457,2
20.000
508,0
24.000
609,6
Figure 227 - Cast
Approx
C to E
Weight
Inches
Lbs.
mm
kg
2.75
2.2
69,9
1,0
2.75
2.5
69,9
1,1
3.25
3.7
82,6
1,7
3.75
5.8
95,3
2,6
3.75
6.0
95,3
2,7
4.25
8.6
108,0
3,9
5.00
20.7
127,0
9,4
5.50
17.6
139,7
8,0
–
–
–
–
6.50
27.3
165,1
12,4
6.50
28.6
165,1
13,0
7.75
48.0
196,9
21,7
9.00
75.0
228,6
34,0
10.00
95.8
254,0
43,4
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Figure 327 - Fabricated
Approx
C to E
Weight
Inches
Lbs.
mm
kg
2.75
2.2
69,9
1,0
2.75
2.5
69,9
1,1
3.25
3.7
82,6
1,7
3.75
5.8
95,3
2,6
3.75
6.0
95,3
2,7
4.25
8.6
108,0
3,9
5.00
20.7
127,0
9,4
5.50
17.6
139,7
8,0
5.50
18.5
139,7
8,4
6.50
27.3
165,1
12,4
6.50
28.6
165,1
13,0
7.75
48.0
196,9
21,7
9.00
75.0
228,6
34,0
10.00
95.8
254,0
43,4
11.00
136.8
279,4
62,0
12.00
167.3
304,8
75,9
15.50
259.5
393,7
117,7
17.25
321.7
438,2
145,9
20.00
442.7
508,0
200,8
GROOVED FITTINGS
Tech Data Sheet: G180
Figure 227
Cast Cross
C to E
C to E
Figure 327
Fabricated Cross
C to E
For information on larger sizes, European sizes or other alternative sizes, contact
GRINNELL Mechanical Products.
See fitting specifications on page 37.
C to E
Refer to back cover for country-specific customer care numbers.
71
GROOVED FITTINGS
Figures 260 & 360 End Caps
GROOVED FITTINGS
Tech Data Sheet: G180
Figure 260 Cap
Cast
Pipe Size
E to E
NPT
Figure 360 Cap
Fabricated
E to E
Figure 260/360 Cap with Tap
Size
(in) (mm)
72
1
⁄ 2"
13mm
Tap
3
⁄ 4"
19mm
Tap
1"
25mm
Tap
2"
50mm
Tap
–
1 (25)
•
–
–
11 ⁄ 4 (32)
•
–
–
–
11 ⁄ 2 (40)
•
–
–
–
2 (50)
•
•
–
–
2 1 ⁄ 2 (65)
•
•
–
–
3 (80)
•
•
•
•
4 (100)
•
•
•
•
5 (125)
•
•
•
•
6 (150)
•
•
•
•
8 (200)
•
•
•
•
10 (250)
•
•
•
•
12 (300)
•
•
•
–
14 (350)
–
–
–
–
16 (400)
–
–
–
–
18 (450)
–
–
–
–
20 (500)
–
–
–
–
24 (600)
–
–
–
–
Nominal
Inches
mm
O.D.
Inches
mm
1
25
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
8
200
10
250
12
300
14
350
16
400
18
450
20
500
24
600
1.315
33,4
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.563
141,3
6.500
165,1
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
14.000
355,6
16.000
406,4
18.000
457,2
20.000
508,0
24.000
609,6
Figure 260 - Cast
Approx
E to E
Weight
Inches
Lbs.
mm
kg
0.83
0.2
21,1
0,1
0.83
0.3
21,1
0,1
0.83
0.4
21,1
0,2
0.92
0.7
23,4
0,3
0.92
1.0
23,4
0,5
0.86
1.3
21,8
0,6
0.92
1.4
23,4
0,6
1.00
2.6
25,4
1,2
0.92
4.7
23,4
2,1
1.00
5.0
25,4
2,3
0.92
6.4
23,4
2,9
1.00
6.2
25,4
2,8
1.06
7.1
27,0
3,2
1.02
24.5
25,8
11,1
1.02
31.0
25,8
14,1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Figure 360 - Fabricated
Approx
E to E
Weight
Inches
Lbs.
mm
kg
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
8.50
36.5
215,9
16,6
9.00
43.5
228,6
19,7
10.00
57.0
254,0
25,6
11.00
75.7
279,4
34,3
12.50
101.0
317,5
45,8
For information on larger sizes, European sizes or other alternative sizes,
contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
www.grinnell.com
GROOVED FITTINGS
Figure 341 Flange Adapters
Figure 342 Flange Adapters
(ANSI Class 150#)
(ANSI Class 300#)
Figure 342
Fabricated Flange Adapter
ANSI Class 300#
Figure 341
Fabricated Flange Adapter
ANSI Class 150#
E to E
Pipe Size
Nominal
Inches
mm
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
3
80
4
100
5
125
6
150
8
200
10
250
12
300
14
350
16
400
18
450
20
500
24
600
O.D.
Inches
mm
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.500
88,9
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
14.000
355,6
16.000
406,4
18.000
457,2
20.000
508,0
24.000
609,6
GROOVED FITTINGS
Tech Data Sheet: G180
E to E
Inches
mm
4.00
101,6
4.00
101,6
4.00
101,6
4.00
101,6
4.00
101,6
6.00
152,4
6.00
152,4
6.00
152,4
6.00
152,4
8.00
203,2
8.00
203,2
8.00
203,2
8.00
203,2
8.00
203,2
8.00
203,2
8.00
203,2
Figure 341 - ANSI Class 150#
Mating Flange
Approx. Weight
Bolt
Lbs.
Qty.
kg
3.7
4
1,7
3.9
4
1,8
6.4
4
2,8
8.8
4
4,0
10.4
4
4,7
18.2
8
8,3
22.0
8
10,0
28.1
8
12,7
43.7
8
19,8
68.2
12
30,9
96.1
12
43,6
123.0
12
55,8
151.0
16
68,5
165.0
16
74,8
205.0
20
93,0
265.0
20
120,2
E to E
E to E
Inches
mm
4.00
101,6
4.00
101,6
4.00
101,6
4.00
101,6
4.00
101,6
6.00
152,4
6.00
152,4
6.00
152,4
6.00
152,4
8.00
203,2
8.00
203,2
8.00
203,2
8.00
203,2
8.00
203,2
8.00
203,2
8.00
203,2
Figure 342 - ANSI Class 300#
Mating Flange
Approx. Weight
Bolt
Lbs.
Qty.
kg
4.6
4
2,1
7.1
4
3,2
8.2
8
3,7
11.9
8
5,4
15.5
8
7,0
28.0
8
12,7
37.0
8
16,8
48.0
12
21,8
79.0
12
35,8
122.0
16
55,3
183.0
16
83,0
199.0
20
90,3
255.0
20
155,7
303.0
24
137,4
365.0
24
165,6
550.0
24
249,5
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
Refer to back cover for country-specific customer care numbers.
73
GROOVED FITTINGS
Figure 343 Flange Adapters
Figure 344 Flange Adapters
(PN16)
(PN16 BS 4504)
GROOVED FITTINGS
Tech Data Sheet: G180
E to E
Pipe Size
Nominal
Inches
mm
2
50
76,1mm
65
3
80
4
100
139,7mm
125
165,1mm
150
6
150
8
200
10
250
12
300
O.D.
Inches
mm
2.375
60,3
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
6.500
165,1
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
Figure 343 - PN16#
E to E
Approx. Weight
Inches
Lbs.
mm
kg
3.74
5.07
95,0
2,3
3.74
7.27
95,0
3,3
3.94
8.82
100,0
4,0
4.02
10.14
102,0
4,6
4.13
13.23
105,0
6,0
4.13
15.87
105,0
7,2
4.13
15.87
105,0
7,2
4.41
22.49
112,0
10,2
5.43
39.68
138,0
18,0
5.43
49.38
138,0
22,4
Figure 344 - PN16 BS 4504
E to E
Approx. Weight
Inches
Lbs.
mm
kg
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
4.41
22.49
112,0
10,2
5.43
39.68
138,0
18,0
5.43
49.38
138,0
22,4
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 37 for fitting specifications.
74
www.grinnell.com
75
MECHANICAL TEES
Mechanical Tees Table of Contents
Threaded Tees and Crosses
MECHANICAL TEES
Figure 730
Female Threaded Tees
Pages 77 - 79
The GRINNELL Figure 730 Mechanical Tee is rated at 500 psi
(34,5 bar) on standard weight pipe. It can be used in place of a
tee, a cross connection, or a welded outlet where a threaded or
grooved outlet is needed. The Mechanical Tee is ideal for use in
retrofit or equipment hookup installations as it can be positioned
along the pipe at the proper location in the field, ensuring exact
lineup of the branch outlet connection. The GRINNELL Figure
730 can be used on steel or HDPE pipe.
All GRINNELL Figure 730 Mechanical Tees are provided with
a ductile iron lower housing section for increased strength and
dependability. This design provides stability and rigidity while
inhibiting damage to the pipe during tightening.
MATERIAL SPECIFICATIONS
Figure 730
Female Threaded Crosses
Pages 77 - 79
Housing Specifications
• ASTM A 536 – Standard specification for
ductile iron castings, Grade 65-45-12
• Tensile Strength, minimum 65,000 psi (4481,6 bar)
• Yield Strength, minimum 45,000 psi (3102,6 bar)
• Elongation in 2" (50mm), minimum 12%
Grooved Tees and Crosses
• ASTM A 153 – Standard specification for hot-dip
galvanizing
Bolt/Nut Specifications
Figure 730
Grooved Tees
Pages 80 - 82
Figure 730
Grooved Crosses
Pages 80 - 82
• ANSI: Carbon steel oval neck bolts and nuts are heattreated and conform to the physical properties of ASTM
A 183 Grade 2 and SAE J429 Grade 5 with a minimum
tensile strength of 110,000 psi (7584.2 bar).
Carbon Steel heavy hex nuts conform to the physical
properties of ASTM A 183 Grade 2 and SAE J995
Grade 5. Bolts and nuts are zinc-electroplated
conforming to ASTM B 633.
• Metric: Carbon steel oval neck track head bolts (Gold
color coded) are heat treated and conform to the physical
properties of ASTM F 568 M with a minimum tensile
strength of 760 MPa.
Carbon steel heavy hex nuts conform to the physical
properties of ASTM A 563 M Class 9. Bolts and nuts are
zinc-electroplated conforming to ASTM B 633.
• Stainless steel bolts and nuts are available upon request.
Gasket Specifications
)RUDGGLWLRQDOOLVWLQJVRU
DSSURYDOVVHHSDJHRU
YLVLWRXUZHEVLWHDW
ZZZJULQQHOOFRP
Coatings
• Orange – Non-lead paint (standard)
• Red – Non-lead paint (optional, regional)
• Hot-Dipped, Zinc Galvanized (optional)
76
• Grade “E” EPDM gaskets have a Green color code
identification and conform to ASTM D 2000 for service
temperatures from -30°F to 230°F (-34°C to 110°C). They
are recommended for hot water not to exceed 230°F
(110°C), plus a variety of dilute acids, oil free air, and
many chemical services. They are not recommended for
petroleum services.
• Grade “T” Nitrile gaskets have an Orange color code
identification and conform to ASTM D 2000 for service
temperatures from -20°F to 180°F (-29°C to 82°C). They
are recommended for petroleum products, vegetable oils,
mineral oils, and air with oil vapors.
www.grinnell.com
MECHANICAL TEES
Figure 730 Mechanical Tees & Crosses – Threaded
(Page 1 of 3)
B
C
B
C
A
Hole
Dia.
Takeout
E
D
A
D
Hole
Dia.
D
C
B
D
A
Hole
Dia.
Takeout
A
MECHANICAL TEES
Tech Data Sheet: G210
A
Takeout
Figure 730 Branch Outlet with Female
NPT/BSP Threaded Branch
(Tee Configuration)
Hole Dia.†
Nominal Size Run x
Branch
Inches
mm
Min.
Inches
mm
Max.
Inches
mm
2 x 1⁄ 2
50 x 15
2 x 3 ⁄4
50 x 20
2x1
50 x 25
2 x 11 ⁄ 4
50 x 32
2 x 11 ⁄ 2
50 x 40
21 ⁄ 2 x 1 ⁄ 2
65 x 15
21 ⁄ 2 x 3 ⁄4
65 x 20
21 ⁄ 2 x 1
65 x 25
2 1 ⁄ 2 x 11 ⁄ 4
65 x 32
2 1 ⁄ 2 x 11 ⁄ 2
65 x 40
21 ⁄ 2 x 2
65 x 50
76,1mm x 1 ⁄ 2
65 x 15
76,1mm x 3 ⁄ 4
65 x 20
76,1mm x 1
65 x 25
76,1mm x 11 ⁄ 4
65 x 32
76,1mm x 11 ⁄ 2
65 x 40
76,1mm x 2
65 x 50
3 x 1⁄ 2
80 x 15
1.50
38,1
1.50
38,1
1.50
38,1
1.75
44,5
1.75
44,5
1.50
38,1
1.50
38,1
1.50
38,1
2.00
50,8
2.00
50,8
2.00
50,8
1.50
38,1
1.50
38,1
1.50
38,1
2.00
50,8
2.00
50,8
2.00
50,8
1.50
38,1
1.63
41,3
1.63
41,3
1.63
41,3
1.88
47,6
1.88
47,6
1.63
41,3
1.63
41,3
1.63
41,3
2.13
54,0
2.13
54,0
2.13
54,0
1.63
41,3
1.63
41,3
1.63
41,3
2.13
54,0
2.13
54,0
2.13
54,0
1.63
41,3
Figure 730 Branch Outlet with Female
NPT/BSP Threaded Branch
(Cross Configuration)
Max.‡
Branch
End Load
Lbs.
kN
277.1
1,2
433.0
1,9
679.1
3,0
1082.1
4,8
1417.6
6,3
277.1
1,2
433.0
1,9
679.1
3,0
1082.1
4,8
1417.6
6,3
2215.1
9,9
277.1
1,2
433.0
1,9
679.1
3,0
1082.1
4,8
1417.6
6,3
2215.1
9,9
277.1
1,2
Figure 730 Branch Outlet with a Female
NPT/BSP Threaded Branch and a Grooved
Branch (Cross Configuration)
Dimensions - Inches mm
A
B
C
D
E
2.62
66,5
2.62
66,5
2.62
66,5
2.78
70,6
2.75
69,9
2.88
73,2
2.88
73,2
2.88
73,2
3.00
76,2
3.07
78,0
3.19
81,0
2.94
74,5
2.94
74,5
2.94
74,5
3.06
77,7
3.13
79,5
3.25
82,6
3.19
81,0
4.88
124,0
4.88
124,0
4.88
124,0
4.88
124,0
4.88
124,0
5.25
133,4
5.25
133,4
5.25
133,4
5.25
133,4
5.25
133,4
5.25
133,4
5.62
142,7
5.62
142,7
5.62
142,7
5.62
142,7
5.62
142,7
5.62
142,7
6.13
155,7
3.07
78,0
3.07
78,0
3.07
78,0
3.32
84,3
3.32
84,3
3.07
78,0
3.07
78,0
3.07
78,0
3.56
90,4
3.59
91,2
4.00
101,6
3.07
78,0
3.07
78,0
3.07
78,0
3.56
90,4
3.56
90,4
4.00
101,6
3.07
78,0
2.12
53,8
2.12
53,8
2.12
53,8
1.93
49,0
1.93
49,0
2.38
60,5
2.38
60,5
2.38
60,5
2.19
55,6
2.17
55,1
2.44
62,0
2.44
62,0
2.44
62,0
2.44
62,0
2.25
57,2
2.25
57,2
2.50
63,5
2.56
65,0
1.59
40,4
1.59
40,4
1.59
40,4
1.59
40,4
1.59
40,4
1.81
46,0
1.81
46,0
1.81
46,0
1.81
46,0
1.81
46,0
1.81
46,0
1.87
47,5
1.87
47,5
1.87
47,5
1.87
47,5
1.87
47,5
1.87
47,5
2.21
56,1
Refer to back cover for country-specific customer care numbers.
Bolt
Size
Inches
mm
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
–
M10 x 57
–
M10 x 57
–
M10 x 57
–
M10 x 57
–
M10 x 57
–
M10 x 57
1
⁄2 x 3
M12 x 89
Tee
Approx.
Weight
Lbs.
kg
2.5
1,1
2.3
1,0
2.2
1,0
2.4
1,1
2.5
1,1
2.4
1,1
2.4
1,1
2.4
1,1
2.5
1,1
2.6
1,2
2.7
1,2
2.5
1,1
2.5
1,1
2.5
1,1
3.3
1,5
3.6
1,6
3.7
1,7
3.7
1,7
Cross
Approx.
Weight
Lbs.
kg
3.4
1,5
3.0
1,4
3.2
1,5
3.4
1,5
3.9
1,8
3.4
1,5
3.4
1,5
3.4
1,5
3.8
1,7
4.1
1,9
4.1
1,9
3.5
1,6
3.5
1,6
3.5
1,6
5.1
2,3
5.7
2,6
5.8
2,6
5.2
2,4
77
MECHANICAL TEES
Figure 730 Mechanical Tees & Crosses – Threaded
(Page 2 of 3)
Tech Data Sheet: G210
B
C
B
C
A
D
A
MECHANICAL TEES
Hole
Dia.
E
Takeout
D
A
D
Hole
Dia.
D
C
B
Hole
Dia.
Takeout
A
A
Takeout
Figure 730 Branch Outlet with Female
NPT/BSP Threaded Branch
(Tee Configuration)
78
Hole Dia.†
Nominal Size Run x
Branch
Inches
mm
Min.
Inches
mm
Max.
Inches
mm
3 x 3 ⁄4
80 x 20
3x1
80 x 25
3 x 11 ⁄ 4
80 x 32
3 x 11 ⁄ 2
80 x 40
3x2
80 x 50
4 x 1⁄ 2
100 x 15
4 x 3 ⁄4
100 x 20
4x1
100 x 25
4 x 11 ⁄ 4
100 x 32
4 x 11 ⁄ 2
100 x 40
4x2
100 x 50
4 x 21 ⁄ 2
100 x 65
4 x 76,1mm
100 x 65
4x3
100 x 80
5 x 11 ⁄ 2
125 x 40
5x2
125 x 50
5 x 21 ⁄ 2
125 x 65
5 x 76,1mm
125 x 65
5x3
125 x 80
165,1mm x 11 ⁄ 4
150 x 32
165,1mm x 11 ⁄ 2
150 x 40
165,1mm x 2
150 x 50
1.50
38,1
1.50
38,1
1.75
44,5
2.00
50,8
2.50
63,5
1.50
38,1
1.50
38,1
1.50
38,1
1.75
44,5
2.00
50,8
2.50
63,5
2.75
69,9
2.75
69,9
3.50
88,9
2.00
50,8
2.50
63,5
2.75
69,9
2.75
69,9
3.50
88,9
2.00
50,8
2.00
50,8
2.50
63,5
1.63
41,3
1.63
41,3
1.88
47,6
2.13
54,0
2.63
66,7
1.63
41,3
1.63
41,3
1.63
41,3
1.88
47,6
2.13
54,0
2.63
66,7
2.88
73,0
2.88
73,0
3.63
92,1
2.13
54,0
2.63
66,7
2.88
73,0
2.88
73,0
3.63
92,1
2.13
54,0
2.13
54,0
2.63
66,7
Max.‡
Branch
End Load
Lbs.
kN
433.0
1,9
679.1
3,0
1082.1
4,8
1417.6
6,3
2215.1
9,9
277.1
1,2
433.0
1,9
679.1
3,0
1082.1
4,8
1417.6
6,3
2215.1
9,9
3245.9
14,4
3534.3
15,7
4810.6
21,4
1417.6
6,3
2215.1
9,9
3245.9
14,4
3534.3
15,7
4810.6
21,4
1082.1
4,8
1417.6
6,3
2215.1
9,9
Figure 730 Branch Outlet with Female
NPT/BSP Threaded Branch
(Cross Configuration)
Figure 730 Branch Outlet with a Female
NPT/BSP Threaded Branch and a Grooved
Branch (Cross Configuration)
Dimensions - Inches mm
A
B
C
D
E
3.19
81,0
3.19
81,0
3.34
84,8
3.38
85,9
3.50
88,9
3.69
93,7
3.69
93,7
3.69
93,7
3.92
99,6
4.00
101,6
4.00
101,6
4.00
101,6
4.00
101,6
4.13
104,9
4.63
117,6
4.63
117,6
4.75
120,7
4.75
120,7
5.00
127,0
5.13
130,3
5.13
130,3
5.13
130,3
6.13
155,7
6.13
155,7
6.13
155,7
6.13
155,7
6.13
155,7
7.13
181,1
7.13
181,1
7.13
181,1
7.13
181,1
7.13
181,1
7.13
181,1
7.13
181,1
7.13
181,1
7.13
181,1
8.13
206,5
8.13
206,5
8.13
206,5
8.13
206,5
8.13
206,5
9.25
235,0
9.25
235,0
9.25
235,0
3.07
78,0
3.07
78,0
3.32
84,3
3.56
90,4
4.09
103,9
3.07
78,0
3.07
78,0
3.07
78,0
3.32
84,3
3.56
90,4
4.06
103,1
4.38
111,3
4.38
111,3
5.13
130,3
3.56
90,4
4.06
103,1
4.38
111,3
4.38
111,3
5.13
130,3
3.56
90,4
3.56
90,4
4.06
103,1
2.56
65,0
2.56
65,0
2.50
63,5
2.48
63,0
2.75
69,9
3.06
77,7
3.06
77,7
3.06
77,7
3.00
76,2
2.98
75,7
3.25
82,6
3.12
79,2
3.12
79,2
3.31
84,1
4.00
101,6
3.88
98,6
3.88
98,6
3.88
98,6
4.06
103,1
4.25
108,0
4.04
102,6
4.31
109,5
2.21
56,1
2.21
56,1
2.21
56,1
2.21
56,1
2.21
56,1
2.78
70,6
2.78
70,6
2.78
70,6
2.78
70,6
2.78
70,6
2.78
70,6
2.78
70,6
2.78
70,6
2.78
70,6
3.37
85,6
3.37
85,6
3.37
85,6
3.37
85,6
3.37
85,6
3.90
99,1
3.90
99,1
3.90
99,1
Bolt
Size
Inches
mm
1
⁄2 x 3
M12 x 89
1
⁄2 x 3
M12 x 89
1
⁄2 x 3
M12 x 89
1
⁄2 x 3
M12 x 89
1
⁄2 x 3
M12 x 89
1
⁄2 x 3
M12 x 89
1
⁄2 x 3
M12 x 89
1
⁄2 x 3
M12 x 89
1
⁄2 x 3
M12 x 89
1
⁄2 x 3
M12 x 89
1
⁄2 x 3
M12 x 89
1
⁄2 x 3
M12 x 89
–
M12 x 89
1
⁄2 x 3
M12 x 89
5
⁄ 8 x 43 ⁄4
M16 x 121
5
⁄ 8 x 43 ⁄4
M16 x 121
5
⁄ 8 x 43 ⁄4
M16 x 121
–
M16 x 121
5
⁄ 8 x 43 ⁄4
M16 x 121
–
M16 x 121
–
M16 x 121
–
M16 x 121
Tee
Approx.
Weight
Lbs.
kg
3.7
1,7
3.7
1,7
3.5
1,6
3.7
1,7
4.7
2,1
4.8
2,2
4.8
2,2
4.8
2,2
4.8
2,2
5.1
2,3
5.5
2,5
6.2
2,8
6.2
2,8
7.8
3,5
7.8
3,5
7.8
3,5
8.9
4,0
8.9
4,0
12.7
5,8
7.7
3,5
7.7
3,5
8.2
3,7
Cross
Approx.
Weight
Lbs.
kg
5.2
2,4
5.2
2,4
4.6
2,1
5.2
2,4
6.8
3,1
5.6
2,5
5.6
2,5
5.6
2,5
5.6
2,5
6.4
2,5
7.3
3,3
8.7
3,9
8.7
3,9
11.9
5,4
9.4
4,3
9.4
4,3
11.5
5,2
11.5
5,2
13.3
6,0
9.5
4,3
9.5
4,3
9.5
4,3
www.grinnell.com
MECHANICAL TEES
Figure 730 Mechanical Tees & Crosses – Threaded
(Page 3 of 3)
Tech Data Sheet: G210
A
D
A
Hole
Dia.
E
Takeout
D
A
D
Hole
Dia.
D
C
B
Hole
Dia.
Takeout
A
MECHANICAL TEES
B
C
B
C
A
Takeout
Figure 730 Branch Outlet with Female
NPT/BSP Threaded Branch
(Tee Configuration)
Hole Dia.†
Nominal Size Run x
Branch
Inches
mm
Min.
Inches
mm
Max.
Inches
mm
165,1mm x 2 1 ⁄ 2
150 x 65
165,1mm x 76,1mm
150 x 65
165,1mm x 3
150 x 80
165,1mm x 4
150 x 100
6 x 11 ⁄ 4
150 x 32
6 x 11 ⁄ 2
150 x 40
6x2
150 x 50
6 x 21 ⁄ 2
150 x 65
6 x 76,1mm
150 x 65
6x3
150 x 80
6x4
150 x 100
8x2
200 x 50
8 x 21 ⁄ 2
200 x 65
8 x 76,1mm
200 x 65
8x3
200 x 80
8x4
200 x 100
2.75
69,9
2.75
69,9
3.50
88,9
4.50
114,3
2.00
50,8
2.00
50,8
2.50
63,5
2.75
69,9
2.75
69,9
3.50
88,9
4.50
114,3
2.75
69,9
2.75
69,9
2.75
69,9
3.50
88,9
4.50
114,3
2.88
73,0
2.88
73,0
3.63
92,1
4.63
117,5
2.13
54,0
2.13
54,0
2.63
66,7
2.88
73,0
2.88
73,0
3.63
92,1
4.63
117,5
2.88
73,0
2.88
73,0
2.88
73,0
3.63
92,1
4.63
117,5
Figure 730 Branch Outlet with Female
NPT/BSP Threaded Branch
(Cross Configuration)
Max.‡
Branch
End Load
Lbs.
kN
3245.9
14,4
3584.3
15,7
4810.6
21,4
7952.2
35,4
1082.1
4,8
1417.6
6,3
2215.1
9,9
3245.9
14,4
3245.9
14,4
4810.6
21,4
7952.2
35,4
3245.9
14,4
3245.9
14,4
3534.3
15,7
4810.6
21,4
7952.2
35,4
Figure 730 Branch Outlet with a Female
NPT/BSP Threaded Branch and a Grooved
Branch (Cross Configuration)
Dimensions - Inches mm
A
B
C
D
E
5.13
130,3
5.13
130,3
5.50
139,7
5.38
136,7
5.13
130,3
5.13
130,3
5.13
130,3
5.13
130,3
5.13
130,3
5.50
139,7
5.38
136,7
6.25
158,8
6.25
158,8
6.25
158,8
6.50
165,1
6.38
162,1
9.25
235,0
9.25
235,0
9.25
235,0
9.25
235,0
9.25
235,0
9.25
235,0
9.25
235,0
9.25
235,0
9.25
235,0
9.25
235,0
9.25
235,0
12.50
317,5
12.50
317,5
12.50
317,5
12.50
317,5
12.50
317,5
4.38
111,3
4.38
111,3
5.13
130,3
6.13
155,7
3.56
90,4
3.56
90,4
4.06
103,1
4.38
111,3
4.38
111,3
5.13
130,3
6.13
155,7
4.06
103,1
4.38
111,3
4.38
111,3
5.13
130,3
6.13
155,7
4.18
106,2
4.18
106,2
4.37
111,0
4.56
115,8
4.25
108,0
4.04
102,6
4.31
109,5
4.18
106,2
4.18
106,2
4.37
111,0
4.56
115,8
5.12
130,0
5.12
130,0
5.12
130,0
5.37
136,4
5.56
141,2
3.90
99,1
3.90
99,1
3.90
99,1
3.90
99,1
3.90
99,1
3.90
99,1
3.90
99,1
3.90
99,1
3.90
99,1
3.90
99,1
3.90
99,1
4.90
124,5
4.90
124,5
4.90
124,5
4.90
124,5
4.90
124,5
Bolt
Size
Inches
mm
–
M16 x 121
–
M16 x 121
–
M16 x 121
–
M16 x 121
5
⁄ 8 x 43 ⁄4
M16 x 121
5
⁄ 8 x 43 ⁄4
M16 x 121
5
⁄ 8 x 43 ⁄4
M16 x 121
5
⁄ 8 x 43 ⁄4
M16 x 121
5
⁄ 8 x 43 ⁄4
M16 x 121
5
⁄ 8 x 43 ⁄4
M16 x 121
5
⁄ 8 x 43 ⁄4
M16 x 121
3
⁄4 x 43 ⁄4
M20 x 121
3
⁄4 x 43 ⁄4
M20 x 121
–
M20 x 121
3
⁄4 x 43 ⁄4
M20 x 121
3
⁄4 x 43 ⁄4
M20 x 121
Tee
Approx.
Weight
Lbs.
kg
9.0
4,1
9.0
4,1
10.5
4,8
12.1
5,5
7.5
3,4
7.5
3,4
7.7
3,5
8.9
4,0
8.9
4,0
10.3
4,7
11.9
5,4
12.1
5,5
12.6
5,7
12.6
5,7
13.6
6,1
15.2
6,9
Cross
Approx.
Weight
Lbs.
kg
11.3
5,1
11.3
5,1
14.1
6,4
17.3
7,8
8.7
3,9
8.7
3,9
9.5
4,3
11.3
5,1
11.3
5,1
14.1
6,4
17.3
7,8
14.1
6,4
15.0
6,8
15.0
6,8
16.9
7,7
20.0
9,1
† Proper hole preparation is required for effective sealing and performance. Check the pipe seal surface within 5 ⁄ 8" (15,9mm) of the hole to ensure it is
free from conditions affecting proper gasket sealing. Remove any sharp or rough edges from the hole or upper housing contact area that might affect
assembly, proper seating of the locating collar, or flow from the outlet. For crosses, ensure double outlet holes are aligned on opposite sides of the
pipe. The use of threaded products other than steel pipe, such as dry pendent sprinklers, may not be compatible with the female threaded outlet on the
Mechanical Tee. Always confirm compatibility by contacting GRINNELL Mechanical Products.
‡ Maximum pressures and end loads are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ on other
pipe materials and/or wall thickness. Contact GRINNELL Mechanical Products for details.
Threads are NPT. Some size outlets are available with BSP threads. Contact GRINNELL Mechanical Products for details.
For information on larger sizes, European sizes or other alternative sizes, contact GRINNELL Mechanical Products.
See page 76 for mechanical tee specifications and pages 191 - 198 for gasket information.
Refer to back cover for country-specific customer care numbers.
79
MECHANICAL TEES
Figure 730 Mechanical Tees & Crosses – Grooved
(Page 1 of 3)
MECHANICAL TEES
Tech Data Sheet: G210
C
B
80
Takeout
Min.
Inches
mm
Max.
Inches
mm
2 x 11 ⁄ 4
50 x 32
2 x 11 ⁄ 2
50 x 40
2 1 ⁄ 2 x 11 ⁄ 4
65 x 32
2 1 ⁄ 2 x 11 ⁄ 2
65 x 40
21 ⁄ 2 x 2
65 x 50
76,1mm x 11 ⁄ 4
65 x 32
76,1mm x 11 ⁄ 2
65 x 40
76,1mm x 2
65 x 50
3 x 11 ⁄ 4
80 x 32
3 x 11 ⁄ 2
80 x 40
3x2
80 x 50
4 x 11 ⁄ 4
100 x 32
1.75
44,5
1.75
44,5
2.00
50,8
2.00
50,8
2.00
50,8
2.00
50,8
2.00
50,8
2.00
50,8
1.75
44,5
2.00
50,8
2.50
63,5
1.75
44,5
1.88
47,6
1.88
47,6
2.13
54,0
2.13
54,0
2.13
54,0
2.13
54,0
2.13
54,0
2.13
54,0
1.88
47,6
2.13
54,0
2.63
66,7
1.88
47,6
Hole
Dia.
A
A
Figure 730 Branch Outlet
with Grooved Branch
(Tee Configuration)
Hole Dia.†
A
D
Hole
Dia.
D
Nominal Size
Run x Branch
Inches
mm
C
B
A
A
Hole
Dia.
C
B
Figure 730 Branch Outlet
with Grooved Branch
(Cross Configuration)
Max.‡
End Load
Branch
Lbs.
kN
1082.1
4,8
1417.6
6,3
1082.1
4,8
1417.6
6,3
2215.1
9,9
1082.1
4,8
1417.6
6,3
2215.1
9,9
1082.1
4,8
1417.6
6,3
2215.1
9,9
1082.1
4,8
Figure 730 Branch Outlet with a Female
NPT/BSP Threaded Branch and a Grooved
Branch (Cross Configuration)
Dimensions - Inches mm
A
B
C
D
2.78
70,6
2.62
66,5
3.00
76,2
3.07
78,0
3.19
81,0
3.06
77,7
3.13
79,5
3.25
82,6
3.34
84,8
3.38
85,9
3.50
88,9
3.92
99,6
4.88
124,0
4.88
124,0
5.25
133,4
5.25
133,4
5.25
133,4
5.62
142,7
5.62
142,7
5.62
142,7
6.13
155,7
6.13
155,7
6.13
155,7
7.13
181,1
3.32
84,3
3.32
84,3
3.56
90,4
3.59
91,2
4.00
101,6
3.56
90,4
3.56
90,4
4.00
101,6
3.32
84,3
3.56
90,4
4.09
103,9
3.32
84,3
1.59
40,4
1.59
40,4
1.81
46,0
1.81
46,0
1.81
46,0
1.87
47,5
1.87
47,5
1.87
47,5
2.21
56,1
2.21
56,1
2.21
56,1
2.78
70,6
Bolt
Size
Inches
mm
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
–
M10 x 57
–
M10 x 57
–
M10 x 57
1
⁄2 x 3
M12 x 89
1
⁄2 x 3
M12 x 89
1
⁄2 x 3
M12 x 89
1
⁄2 x 3
M12 x 89
Tee
Cross Approx.
Approx. Weight
Weight
Lbs.
Lbs.
kg
kg
2.5
1,1
2.4
1,1
2.5
1,1
2.5
1,1
2.5
1,1
2.5
1,1
2.5
1,1
2.5
1,1
3.5
1,6
3.6
1,6
4.5
2,0
4.8
2,2
3.3
1,5
3.7
1,7
3.8
1,7
3.9
1,8
3.8
1,7
3.8
1,7
3.9
1,8
3.8
1,7
4.6
2,1
5.0
2,3
6.4
2,9
5.6
2,5
www.grinnell.com
MECHANICAL TEES
Figure 730 Mechanical Tees & Crosses – Grooved
(Page 2 of 3)
Tech Data Sheet: G210
C
B
A
A
Hole
Dia.
C
B
Takeout
D
A
D
Hole
Dia.
Hole
Dia.
A
A
Figure 730 Branch Outlet
with Grooved Branch
(Tee Configuration)
Hole Dia.†
Nominal Size
Run x Branch
Inches
mm
Min.
Inches
mm
Max.
Inches
mm
4 x 11 ⁄ 2
100 x 40
4x2
100 x 50
4 x 21 ⁄ 2
100 x 65
4 x 76,1mm
100 x 65
4x3
100 x 80
5 x 11 ⁄ 2
125 x 40
5x2
125 x 50
5 x 21 ⁄ 2
125 x 65
5 x 76,1mm
125 x 65
5x3
125 x 80
165,1mm x 11 ⁄ 4
150 x 32
165,1mm x 11 ⁄ 2
150 x 40
165,1mm x 2
150 x 50
165,1mm x 21 ⁄ 2
150 x 65
165,1mm x 76,1mm
150 x 65
165,1mm x 3
150 x 80
165,1mm x 4
150 x 100
2.00
50,8
2.50
63,5
2.75
69,9
2.75
69,9
3.50
88,9
2.00
50,8
2.50
63,5
2.75
69,9
2.75
69,9
3.50
88,9
2.00
50,8
2.00
50,8
2.50
63,5
2.75
69,9
2.75
69,9
3.50
88,9
4.50
114,3
2.13
54,0
2.63
66,7
2.88
73,0
2.88
73,0
3.63
92,1
2.13
54,0
2.63
66,7
2.88
73,0
2.88
73,0
3.63
92,1
2.13
54,0
2.13
54,0
2.63
66,7
2.88
73,0
2.88
73,0
3.63
92,1
4.63
117,5
Figure 730 Branch Outlet
with Grooved Branch
(Cross Configuration)
Max.‡
End Load
Branch
Lbs.
kN
1417.6
6,3
2215.1
9,9
3245.9
14,4
3534.3
15,7
4810.6
21,4
1417.6
6,3
2215.1
9,9
3245.9
14,4
3534.3
15,7
4810.6
21,4
1082.1
4,8
1417.6
6,3
2215.1
9,9
3245.9
14,4
3534.3
15,7
4810.6
21,4
7952.2
35,4
MECHANICAL TEES
C
B
Figure 730 Branch Outlet with a Female
NPT/BSP Threaded Branch and a Grooved
Branch (Cross Configuration)
Dimensions - Inches mm
A
B
C
D
4.00
101,6
4.00
101,6
4.00
101,6
4.00
101,6
4.13
104,9
4.63
117,6
4.63
117,6
4.75
120,7
4.75
120,7
5.00
127,0
5.13
130,3
5.13
130,3
5.13
130,3
5.13
130,3
5.13
130,3
5.50
139,7
5.38
136,7
7.13
181,1
7.13
181,1
7.13
181,1
7.13
181,1
7.13
181,1
8.13
206,5
8.13
206,5
8.13
206,5
8.13
206,5
8.13
206,5
9.25
235,0
9.25
235,0
9.25
235,0
9.25
235,0
9.25
235,0
9.25
235,0
9.25
235,0
3.56
90,4
4.06
103,1
4.38
111,3
4.38
111,3
5.13
130,3
3.56
90,4
4.06
103,1
4.38
111,3
4.38
111,3
5.13
130,3
3.56
90,4
3.56
90,4
4.06
103,1
4.38
111,3
4.38
111,3
5.13
130,3
6.13
155,7
2.78
70,6
2.78
70,6
2.78
70,6
2.78
70,6
2.78
70,6
3.37
85,6
3.37
85,6
3.37
85,6
3.37
85,6
3.37
85,6
3.90
99,1
3.90
99,1
3.90
99,1
3.90
99,1
3.90
99,1
3.90
99,1
3.90
99,1
Refer to back cover for country-specific customer care numbers.
Bolt
Size
Inches
mm
1
⁄2 x 3
M12 x 89
1
⁄2 x 3
M12 x 89
1
⁄2 x 3
M12 x 89
–
M12 x 89
1
⁄2 x 3
M12 x 89
5
⁄ 8 x 43 ⁄4
M16 x 121
5
⁄ 8 x 43 ⁄4
M16 x 121
5
⁄ 8 x 43 ⁄4
M16 x 121
–
M16 x 121
5
⁄ 8 x 43 ⁄4
M16 x 121
–
M16 x 121
–
M16 x 121
–
M16 x 121
–
M16 x 121
–
M16 x 121
–
M16 x 121
–
M16 x 121
Tee
Cross Approx.
Approx. Weight
Weight
Lbs.
Lbs.
kg
kg
5.0
2,3
5.3
2,4
5.9
2,7
5.9
2,7
7.4
3,4
7.7
3,5
7.6
3,4
8.6
3,9
8.6
3,9
12.3
5,6
7.7
3,5
7.6
3,4
8.0
3,6
8.8
4,0
8.8
4,0
10.1
4,6
11.6
5,3
6.2
2,8
6.9
3,1
8.2
3,7
8.2
3,7
11.1
5,0
9.2
4,2
9.0
4,1
11.0
5,0
11.0
5,0
12.5
5,7
9.5
4,3
9.3
4,2
9.1
4,1
10.8
4,9
10.8
4,9
13.3
6,0
16.3
7,4
81
MECHANICAL TEES
Figure 730 Mechanical Tees & Crosses – Grooved
(Page 3 of 3)
Tech Data Sheet: G210
C
MECHANICAL TEES
B
C
B
A
A
Hole
Dia.
C
B
A
D
Hole
Dia.
Takeout
D
Hole
Dia.
A
A
Figure 730 Branch Outlet
with Grooved Branch
(Tee Configuration)
Hole Dia.†
Nominal Size
Run x Branch
Inches
mm
Min.
Inches
mm
Max.
Inches
mm
6 x 11 ⁄ 4
150 x 32
6 x 11 ⁄ 2
150 x 40
6x2
150 x 50
6 x 21 ⁄ 2
150 x 65
6x3
150 x 80
6x4
150 x 100
8 x 21 ⁄ 2
200 x 65
8 x 76,1mm
200 x 65
8x3
200 x 80
8x4
200 x 100
2.00
50,8
2.00
50,8
2.50
63,5
2.75
69,9
3.50
88,9
4.50
114,3
2.75
69,9
2.75
69,9
3.50
88,9
4.50
114,3
2.13
54,0
2.13
54,0
2.63
66,7
2.88
73,0
3.63
92,1
4.63
117,5
2.88
73,0
2.88
73,0
3.63
92,1
4.63
117,5
Figure 730 Branch Outlet
with Grooved Branch
(Cross Configuration)
Max.‡
End Load
Branch
Lbs.
kN
1082.1
4,8
1417.6
6,3
2215.1
9,9
3245.9
14,4
4810.6
21,4
7952.2
35,4
3245.9
14,4
3534.3
15,7
4810.6
21,4
7952.2
35,4
Figure 730 Branch Outlet with a Female
NPT/BSP Threaded Branch and a Grooved
Branch (Cross Configuration)
Dimensions - Inches mm
A
B
C
D
5.13
130,3
5.13
130,3
5.13
130,3
5.13
130,3
5.50
139,7
5.38
136,7
6.25
158,8
6.25
158,8
6.50
165,1
6.38
162,1
9.25
235,0
9.25
235,0
9.25
235,0
9.25
235,0
9.25
235,0
9.25
235,0
12.50
317,5
12.50
317,5
12.50
317,5
12.50
317,5
3.56
90,4
3.56
90,4
4.06
103,1
4.38
111,3
5.13
130,3
6.13
155,7
4.38
111,3
4.38
111,3
5.13
130,3
6.13
155,7
3.90
99,1
3.90
99,1
3.90
99,1
3.90
99,1
3.90
99,1
3.90
99,1
4.90
124,5
4.90
124,5
4.90
124,5
4.90
124,5
Bolt
Size
Inches
mm
5
⁄ 8 x 43 ⁄4
M16 x 121
5
⁄ 8 x 43 ⁄4
M16 x 121
5
⁄ 8 x 43 ⁄4
M16 x 121
5
⁄ 8 x 43 ⁄4
M16 x 121
5
⁄ 8 x 43 ⁄4
M16 x 121
5
⁄ 8 x 43 ⁄4
M16 x 121
3
⁄4 x 43 ⁄4
M20 x 121
–
M20 x 121
3
⁄4 x 43 ⁄4
M20 x 121
3
⁄4 x 43 ⁄4
M20 x 121
Tee
Cross Approx.
Approx. Weight
Weight
Lbs.
Lbs.
kg
kg
7.7
3,5
7.6
3,4
8.0
3,6
8.8
4,0
10.1
4,6
11.6
5,3
12.3
5,6
12.3
5,6
13.2
6,0
14.7
6,7
9.5
4,3
9.3
4,2
9.1
4,1
10.8
4,9
13.3
6,0
16.3
7,4
14.5
6,6
14.5
6,6
16.1
7,3
19.0
8,6
† Proper hole preparation is required for effective sealing and performance. Check the pipe seal surface within 5 ⁄ 8" (15,9mm) of the hole to ensure it
is free from conditions affecting proper gasket sealing. Remove any sharp or rough edges from the hole or upper housing contact area that might
affect assembly, proper seating of the locating collar, or flow from the outlet. For crosses, ensure double outlet holes are aligned on opposite sides
of the pipe.
‡ Maximum pressures and end loads are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ on other
pipe materials and/or wall thickness. Contact GRINNELL Mechanical Products for details.
For information on larger sizes, European sizes or other alternative sizes, contact GRINNELL Mechanical Products.
See page 76 for mechanical tee specifications and pages 191 - 198 for gasket information.
82
www.grinnell.com
83
VALVES
Valves Table of Contents
VALVES
Model B8101
Low Profile Butterfly Valves
Page 85
Model B302
Grooved End
Butterfly Valves
Pages 86 - 89
Model CB800
Solder
Balancing Valves
Page 100
Model CB800
Threaded
Balancing Valves
Page 100
Model CB800
Grooved
Balancing Valves
Page 101
Model 308
Butterfly Valves
Pages 90 - 91
Model BV835
Ball Valves
Pages 92 - 93
Model 590
Grooved End Check Valves
Pages 94 - 95
Model TD830
Triple Duty Valves
Page 96
84
Model CB800
Flanged
Balancing Valves
ANSI & PN16/PN10
Page 102 - 103
Model B680
Copper Systems
Butterfly Valves
Page 128
Model 469
G-PRESS Systems
Ball Valves
Page 167
Model B8200L
G-MINE PVC Systems
Butterfly Valves
Page 189
www.grinnell.com
VALVES
Model B8101 Low Profile Butterfly Valves
Tech Data Sheet: G330
The GRINNELL Model B8101 Low Profile Butterfly Valve has
a rated working pressure of 200 psi (13,8 bar) and provides
efficient control of fluid in piping systems. Flow can be from
either direction and the valve may be positioned in any
orientation. The ductile iron body is epoxy-coated to resist
atmospheric corrosion. The disc is EPDM encapsulated ductile
iron compatible with a variety of chemicals and temperature
ranges.
VALVES
MATERIAL SPECIFICATIONS
Body
• Ductile iron
Body Coating
• Black epoxy-coated
Disc
• Ductile iron
Disc Seal
• Grade “E” EPDM encapsulated rubber
-20°F to 250°F (-29°C to 121°C) with intermittent service
at 250°F (121°C) and continuous service at 225°F
(107°C)
• Optional: Grade “T” Nitrile encapsulated rubber
-20°F to 180°F (-29°C to 82°C)
A
C
Stem
B
• Two-piece stainless steel, splined
Stem Seal
• O-rings, upper and lower stem
F
Handle
E
• Carbon steel zinc-plated
Performance
D
• Pressure drop, contact GRINNELL Mechanical Products.
Pipe Size
Dimensions - Inches mm
Nominal
Inches
mm
2
50
21 ⁄ 2
65
3
80
4
100
O.D.
Inches
mm
2.375
60,3
2.875
73,0
3.500
88,9
4.500
114,3
5
125
6
150
A
B
C
D
E
F
3.39
86,0
3.78
96,0
3.78
96,0
4.53
115,0
5.98
152,0
5.98
152,0
8.27
210,0
8.27
210,0
0.98
25,0
0.98
25,0
0.98
25,0
0.98
25,0
1.81
46,0
2.05
52,0
2.56
65,0
3.27
83,0
1.97
50,0
2.40
61,0
2.64
67,0
3.27
83,0
3.15
80,0
3.58
91,0
4.21
107,0
4.84
123,0
5.563
5.50
12.25
1.26
4.00
4.00
6.75
141,3
6.625
168,3
139,7
5.20
132,0
311,2
12.01
305,0
32,0
1.26
32,0
101,6
4.29
109,0
101,6
4.29
109,0
171,5
6.85
174,0
For information on larger sizes, contact GRINNELL Mechanical Products.
Refer to back cover for country-specific customer care numbers.
85
VALVES
Model B302 Grooved End Butterfly Valves
(Page 1 of 4)
Tech Data Sheet: G310
MATERIAL SPECIFICATIONS
VALVES
Ductile Iron Body
GRINNELL Model B302 Butterfly Valves are capable of
pressures of 300 psi (20,7 bar) for sizes 2" – 8" (50mm
– 200mm) and 200 psi (13,8 bar) for sizes 10" and 12"
(250mm – 300mm). The valves are designed for efficient
control of: on/off or throttling/balancing service; fluid flow;
and “bubble tight” shut-off in piping systems. Flow may be
from either direction, and the valve may be positioned in
any orientation. The valves are available with either a gear
operator, for sizes 2" – 12" (50mm – 300mm), or lever-lock
operator, for sizes 2" – 8" (50mm – 200mm). The valves are
furnished with grooved ends for use with grooved couplings
and can be easily adapted to flanged components utilizing
GRINNELL Figure 71 Class 150 Flange Adapters.
The body and disc construction provides for increased
strength and durability. The disc seal and body coatings
are compatible with a variety of chemicals and temperature
range. (Contact GRINNELL Mechanical Products for specific
recommendations on seal and coating selection).
The GRINNELL Model B302 Butterfly Valve with Gear
Operator is a self-locking worm gear type. It is equipped with
adjustable stops at the open and shut positions.
The GRINNELL Model B302 Butterfly Valve with Lever-Lock
Operator has a throttling plate that provides throttling notches
every 10° for manual control in balancing up to 90° or shut
off service. The lever may be padlocked in any one of the
positions, including opened or closed, by virtue of a locking
hole located in the handle and lever.
Conforms To MSS SP-67
Model B302
with Gear Operator
• ASTM A 395 – Standard specification for ductile
iron castings, Grade 60-40-18
• Tensile strength, minimum 60,000 psi (4136,9 bar)
• Yield strength, minimum 40,000 psi (2757,9 bar)
• Elongation in 2" (50mm), minimum 18%
Disc
• Ductile iron ASTM A 395 w/EPDM or Buna-N
encapsulation
Body Coating
• Black Polymide-Coated
O-Ring
• EPDM, Fluoroelastomer, or Buna-N
Upper and Lower Stem
• Type 416 Stainless Steel ASTM A 582
Gear Operator
• Cast iron housing
Lever-Lock Operator
• Handle – Iron Polymer-Coated
• Lever-Lock – Steel Zinc-Plated
• Throttling Plate – Steel Zinc-Plated
Disc Seal Specifications Encapsulated
Rubber
Model B302
with Lever-Lock Operator
• EPDM – For service temperatures from -20°F to 250°F
(-29°C to 121°C), intermittent service at 250°F (121°C)
and continuous service at 225°F (107°C). Recommended
for hot water not to exceed the temperature ratings
above, plus a variety of dilute acids, alkalines, and
many chemical services. They are not recommended for
petroleum oil, strong acid, strong alkaline, or compressed
air services.
• Nitrile – For service temperatures from -20°F to 180°F
(-29°C to 82°C). Recommended for solvents, oils,
water, and hydraulic fluid resistance. They are not
recommended for highly polar solvents such as acetone
and methyl ethyl ketone, chlorinated hydrocarbons,
ozone, or nitro hydrocarbons and some aviation fuels.
Note: replacement lever handles and gear wheels are available,
contact GRINNELL Mechanical Products.
86
• Fluoroelastomer – For service temperatures +20°F
to 300°F (-7°C to 149°C). Recommended for oxidizing
acids, petroleum products, hydraulic fluids, lubricants,
and halogenated hydrocarbons.
www.grinnell.com
VALVES
Model B302 Grooved End Butterfly Valves
(Page 2 of 4)
VALVES
Tech Data Sheet: G310
C
H
A
G
B
E
D
Model B302 - Gear Operator
Pipe Size
Nominal
Inches
mm
2
50
21 ⁄ 2
65
3
80
4
100
5
125
6
150
8
200
10
250
12
300
O.D.
Inches
mm
2.375
60,3
2.875
73,0
3.500
88,9
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
10.750
273,1
12.750
323,9
Dimensions - Inches mm
A
B
C
D
E
G
H
8.46
214,9
8.65
219,7
8.99
226,1
9.79
248,7
9.30
236,2
13.53
343,7
14.47
367,5
16.53
418,9
17.52
445,0
3.14
79,8
3.25
82,6
3.54
89,9
4.35
110,5
4.84
122,9
5.93
150,6
6.87
174,5
9.17
232,9
10.17
258,3
7.64
194,1
7.64
194,1
7.64
194,1
7.64
194,1
7.64
194,1
9.53
242,1
9.53
242,1
11.54
293,1
11.54
293,1
2.89
73,4
3.46
87,9
3.97
100,8
5.03
127,8
6.27
159,3
7.25
184,2
9.25
235,0
11.25
285,6
13.14
333,8
3.33
84,6
3.85
97,8
3.85
97,8
4.56
115,8
5.86
148,8
5.86
148,8
5.26
133,6
6.29
159,8
6.52
165,6
5.50
139,7
5.69
144,5
5.94
150,9
8.00
203,2
7.33
186,2
8.61
218,7
9.55
242,6
11.61
294,9
12.60
320,0
5.91
150,1
5.91
150,1
5.91
150,1
5.91
150,1
5.91
150,1
9.84
249,9
9.84
249,9
18.0
457,2
18.0
457,2
Approx.
Weight
Lbs.
kg
14.5
6,6
15.5
7,0
17.0
7,7
20.5
9,3
25.0
11,3
33.0
15,0
45.0
20,4
83.0
37,6
100.0
45,4
*End of disc does not extend beyond valve body.
For information on larger sizes, contact GRINNELL Mechanical Products.
Refer to back cover for country-specific customer care numbers.
87
VALVES
Model B302 Grooved End Butterfly Valves
(Page 3 of 4)
VALVES
Tech Data Sheet: G310
C
A
B
E
D
Model B302 - Lever Lock Operator
Pipe Size
Dimensions - Inches mm
Approx.
Weight
Lbs.
kg
Nominal
Inches
mm
O.D.
Inches
mm
A
B
C
D
E
2
50
21 ⁄ 2
65
3
80
4
100
5
125
6
150
8
200
2.375
60,3
2.875
73,0
3.500
88,9
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
5.31
134,9
5.41
137,4
5.62
142,7
6.57
166,9
7.07
179,6
8.40
213,4
9.37
238,0
3.14
79,8
3.25
82,6
3.54
89,9
4.35
110,5
4.84
122,9
5.93
150,6
6.87
174,5
10.50
266,7
10.50
266,7
10.50
266,7
10.50
266,7
10.50
266,7
13.75
349,3
13.75
349,3
2.89
73,4
3.46
87,9
3.97
100,8
5.03
127,8
6.27
159,3
7.25
184,2
9.25
235,0
3.33
84,6
3.85
97,8
3.85
97,8
4.56
115,8
5.86
148,8
5.86
148,8
5.26
133,6
6.7
3,0
7.5
3,4
8.7
3,9
12.2
5,5
17.3
7,8
27.4
23,4
32.5
14,7
*End of disc does not extend beyond valve body.
For information on larger sizes or availability in select regions, contact GRINNELL Mechanical Products.
88
www.grinnell.com
VALVES
Model B302 Grooved End Butterfly Valves - Options
Stem Extensions
Tech Data Sheet: G310
4
B
5
A
MATERIAL LIST
Customer
Specified
Length
6
Adjustable Sprocket Rim
The Babbitt Adjustable Sprocket Rim provides for
remote operation of the butterfly valves in high, outof-reach locations. Specify the sprocket number size,
and chain length. (Chain length = Height x 0,6m +
0,6m).
7
8
Part
Material
1. Plug
2. Top Flange Bushing
3. Top Flange
4. Housing (Steel Pipe)
5. Plug and Rod Coupling
6. Rod
7. Rod and Stem Coupling
8. Bottom Flange
Steel
Bronze
Steel
Steel
Steel
Steel
Steel
Steel
VALVES
Stem extensions can be provided to permit remote
operation of the valve in any required length. Stem
extensions are available in lengths up to 10 ft. (3
meters). The top flange of the extension stem, plug
shaft diameter, and distance across the flats on the
plug shaft are the same size as the valve selected.
This design allows interchangeability of gear
operators, actuators, and adapter bushings from
the valve mounting flange to the extension stem top
flange.
(Page 4 of 4)
1
2
3
C
Valve
Torque
Torque is the rotary effort required to operate a valve. This
turning force in a butterfly valve is determined by three
factors:
• Friction of the disc to seat for sealing
• Bearing friction
• Dynamic torque
2 - 12
50 - 300
Breakaway Torque is the total of the torques resulting
from bearing friction and seat/disc interference friction
at a given pressure differential. This value is normally the
highest required torque to operate a valve, and is used in
sizing actuators. The torques listed are valid for water and
lubricating fluids at ambient temperature. For dry and nonlubricating fluids, contact a GRINNELL Mechanical Products
representative.
Nominal
Inches
mm
2
50
21 ⁄ 2
65
3
80
4
100
5
125
6
150
8
200
10
250
12
300
The torque listed is for EPDM. When calculating torques for
Buna-N or Fluoroelastomer, multiply listed torque by 1.25.
Performance
5
4
3
2
"
12
10
"
8"
6"
5"
4"
2 1/
3"
2"
1
2"
A
B
C
2.88
73,2
1.125
28,6
1.12
28,4
Torque
Lbs - In., N - m
Pipe Size
Butterfly valves, sizes 8" (200mm) and larger, when used
on liquids, show a marked increase in dynamic torque,
which tends to close the valve. For this reason, gear
operated or actuated valves are recommended.
PRESSURE DROP IN PSI
Dimensions - Inches mm
Pipe Size
Nominal
Inches
mm
0.5
0.4
0.3
O.D.
Inches
mm
2.375
60,3
2.875
73,0
3.500
88,9
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
100 psi
6,9 bar
200 psi
13,8 bar
300 psi
20,7 bar
48
5,42
48
5,42
100
11,25
185
20,88
294
33,21
520
58,71
1,070
120,88
1,550
175,12
2,150
242,91
67
7,56
67
7,56
134
15,13
251
16,20
410
46,31
705
79,65
1,495
168,90
2,214
250,15
3,024
341,66
83
9,38
83
9,38
168
18,98
317
35,81
499
56,37
890
100,55
1,798
203,14
2,654
299,85
3,662
413,74
For information on larger sizes, contact GRINNELL
Mechanical Products.
0.2
30000
20000
10000
3000
4000
5000
2000
1000
300
400
500
200
100
30
40
50
20
10
0.1
FLOW RATE (GPM)
Refer to back cover for country-specific customer care numbers.
89
VALVES
Model 308 Butterfly Valves
(Page 1 of 2)
Tech Data Sheet: G320
The GRINNELL Model 308 Butterfly Valve provides
dependable, long-term service and superior control of fluid
flow in piping systems. Flow may be from either direction,
and the valve may be positioned in any orientation.
VALVES
The valve is furnished with grooved ends for use with
grooved couplings. The body and disc design provides
exceptional flow characteristics and low operating torque.
The disc has a streamlined profile that optimizes flow. The
body is lined with an elastomer seat that is reinforced with a
phenolic backing ring, reducing seat distortion, and wear.
The GRINNELL Model 308 Butterfly Valve includes a
gear operator with adjustable stops at the open and shut
positions.
The maximum Working Pressure is 150 psi (10,3 bar) with
316 S.S. Stem and 200 psi (13,8 bar) with 416 S.S. Stem.
Special order is available upon request: Vacuum Service to
29.5" (750mm) Hg.
C
J
A
G
H
B
E
D
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
14
14.000
350
355,6
16
16.000
400
406,4
18
18.000
450
457,2
20
20.000
500
508,0
24
24.000
600
609,6
Dimensions - Inches mm
A
B
C
D
E
F
23.25
590,6
24.75
628,7
25.75
654,1
27.25
692,2
30.12
765,0
10.75
273,1
12.50
317,5
14.00
355,6
15.00
381,0
16.75
425,5
10.00
254,0
10.00
254,0
10.00
254,0
10.00
254,0
10.25
260,4
21.00
533,4
23.50
596,9
25.00
635,0
27.50
698,5
32.00
812,8
13.06
331,7
14.33
364,0
15.40
391,2
16.38
416,1
18.26
463,8
15.25
387,4
16.75
425,5
17.75
450,9
18.25
463,6
21.12
536,4
Approx.
Weight
Lbs.
kg
378.0
171,8
452.0
205,5
548.0
249,1
728.0
330,9
1097.0
498,6
For information on larger sizes, contact GRINNELL Mechanical Products.
90
www.grinnell.com
VALVES
Model 308 Butterfly Valves
MATERIAL SPECIFICATIONS
(Page 2 of 2)
Tech Data Sheet: G320
Body
Gear Operator
• Cast iron conforming to ASTM A 126, Class B
• Cast iron housing
Body Seat (Liner)
Upper and Lower Bearings
• Grade E EPDM, grade T nitrile or fluoroelastomer
Contact GRINNELL Mechanical Products for specific
recommendations on seat material.
• Reinforced Teflon*
Plug
Body Coating
VALVES
• Cast iron ASTM A 126
• Epoxy coated
Seat Material
Disc
• Grade E EPDM – For service temperatures from
-40°F to 230°F (-40°C to 110°C). Recommended for
water service, dilute acids, alkalies, oil-free air, and
many chemical services. They are not recommended
for use in petroleum services.
• Stainless steel conforming to ASTM A 351,
Grade CF8M
• Aluminum bronze conforming to ASTM B 148,
C95400
• Ductile iron conforming to ASTM A 536,
Grade 65-45-12
• Grade T Nitrile – For service temperatures from
-20°F to 180°F (-29°C to 82°C). Recommended for
petroleum products, air with oil vapors, vegetable oils,
and mineral oils. They are not recommended for use
in hot water services.
Drive and Bottom Shaft
• Stainless steel conforming to ASTM A 582, Type 416
or Stainless steel conforming to ASTM A 276,
Type 316
Performance
Contact GRINNELL Mechanical Products for specific
recommendations on seat material.
FLOW RATE IN LITRES PER MINUTE (LPM)
(1 GPM = 3,785 LPM)
20000
30000
50000 70000 100000
200000 300000
5.0
0,300
4.0
3.0
0,200
0,060
16
0,050
0.6
0.5
0.4
0,040
0,030
0.3
NOMINAL PRESSURE DROP IN BAR
(1 PSI = 0,06895 BAR)
H(
DN
350
INC
)
H(
DN
18
400
INC
)
H(
DN
20
450
INC
)
H(
DN
500
)
24
INC
H(
DN
600
)
0,100
0,090
0,080
0,070
INC
1.0
0.9
0.8
0.7
14
NOMINAL PRESSURE DROP
IN POUNDS PER SQUARE INCH (PSI)
2.0
0,020
0.2
0.1
3000
5000
7000
10000
20000
30000
0,010
0,009
0,008
0,007
50000 70000 100000
FLOW RATE IN GALLONS PER MINUTE (GPM)
Note:
For design purposes, a safety factor of 15% to 20% should be applied to the values in the above table.
Refer to back cover for country-specific customer care numbers.
* Teflon is an trademark of Dupont
91
VALVES
Model BV835 Ball Valves
(Page 1 of 2)
GRINNELL Model BV835 Ball Valves provide for
efficient control of fluid in piping systems. Flow may
be from either direction, and the valves may be
positioned in any orientation. The valves are furnished
with grooved ends for use with GRINNELL Grooved
Couplings. The handle is provided with a device for
padlocking in either the open or closed position.
Tech Data Sheet: G380
VALVES
The GRINNELL Model BV835 is furnished with grooved
ends and features a handle that accepts a padlock
device for locking in either the open or closed position.
Flow may be from either direction and the valves may be
positioned in any orientation.
Maximum Working Pressure
1,000 psi (68,9 bar) 2" – 3" (50mm – 80mm)
800 psi (55,2 bar) 4" (100mm)
600 psi (41,4 bar) 6" (150mm)
A
C
Shell Test
1.5 times WOG x 60 seconds, hydrostatic, at
ambient temperature
Seat Test
80 psi (5,5 bar) x 60 seconds, pneumatic
B
MATERIAL
SPECIFICATIONS
Body
D
• Ductile iron conforming to
ASTM A 536, Grade 65-45-12
Body Coating
• Black enamel
Ball
• Type 304 Stainless Steel
Body Seal
• R-PTFE
Seats
• Virgin TFE
O-Ring
• Fluoroelastomer (Viton)
Stem
• Carbon steel, nickel-plated,
- Type 304 Stainless Steel available
Lever Handle
• Carbon steel, zinc plated with plastic grip,
- Type 304 Stainless Steel available
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
11 ⁄ 2
1.900
40
48,3
2
2.375
50
60,3
2.875
21 ⁄ 2
65
73,0
3
3.500
80
88,9
4
4.500
100
114,3
6
6.625
150
168,3
Operating
Torque *
Lbs - in
N-m
62
7
150
17
186
21
248
28
398
45
531
60
Dimensions - Inches mm
A
B
C
D
5.12
130
5.50
140
6.25
159
6.56
167
9.45
240
10.15
258
3.39
86
3.75
95
5.20
132
5.63
143
3.70
94
8.70
221
7.00
178
7.00
178
10.43
265
10.43
265
10.43
265
23.60
600
1.25
32
1.50
38
2.00
50
2.50
63
3.50
90
4.92
125
Approx.
Weight
Lbs.
kg
4.8
2,2
6.4
2,9
10.6
4,8
13.4
6,1
55.0
25,0
79.2
36,0
* For the first opening or closing of the valve when the valve is not continuously
operated, an additional torque of 2.0 – 2.5 times the listed operating torque is
normally required.
For information on larger sizes, contact GRINNELL Mechanical Products.
Gear Operator
• Manual with hand wheel, cast iron body
92
www.grinnell.com
VALVES
Model BV835 Ball Valves
(Page 2 of 2)
Tech Data Sheet: G380
A
C
Pressure
Performance
E
10,000
VALVES
Pressure (kPa)
B
8,000
6,000
4,000
D
2,000
0
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
1.900
11 ⁄ 2
40
48,3
2
2.375
50
60,3
21 ⁄ 2
2.875
65
73,0
3
3.500
80
88,9
4
4.500
100
114,3
6
6.625
150
168,3
Dimensions - Inches mm
A
B
C
D
E
5.12
130
5.50
140
6.25
159
6.56
167
9.45
240
10.15
258
4.88
124
5.38
137
5.68
145
7.16
182
8.00
203
10.89
277
8
203
8
203
8
203
8
203
8
203
14
356
1.25
32
1.50
38
2.00
50
2.50
63
3.50
90
4.92
125
6
152
6
152
6
152
6
152
6
152
12
305
Approx.
Weight
Lbs.
kg
15.0
7,0
18.0
8,0
22.0
10,0
31.0
14,0
73.0
33,0
123.4
56,0
For information on larger sizes, contact GRINNELL Mechanical Products.
General Notes
• Pressure ratings listed are CWP (cold water pressure) or maximum working pressure
within the service temperature range of the gasket used in the coupling. For additional
information, contact GRINNELL Mechanical Products.
50
0
100
200
250
Temperature (C°)
Flow Data - Cv Values
Values for flow of water at 60°F (16°C)
&Y
4
¨3
Where: Cv = Flow coefficient
Q = Flow (GPM)
ΔP = Pressure drop (psi)
Pipe Size
Nominal
Inches
mm
11 ⁄ 2
40
2
50
21 ⁄ 2
65
3
80
4
100
6
150
O.D.
Inches
mm
1.900
48,3
2.375
60,3
2.875
73,0
3.500
88,9
4.500
114,3
6.625
168,3
Cv
Value
130
180
320
600
1020
3300
• Maximum working pressures and end loads listed are total of internal and external
pressures and loads based on Schedule 40 steel pipe with roll grooves to ANSI/AWWA
C606-04 specifications. For information on other pipe schedules, contact GRINNELL
Mechanical Products.
• Warning: Piping systems must always be depressurized and drained before attempting
disassembly and/or removal of any components.
Refer to back cover for country-specific customer care numbers.
93
VALVES
Model 590 Grooved End Check Valves
(Page 1 of 2)
GRINNELL Model 590 Check Valves are capable of
pressures up to 300 psi (20,7 bar). These valves are
designed as compact and rugged swing-type units that
allow water flow in one direction and prevent flow in the
opposite direction. They are manufactured with a ductile iron
body, nickel seat, and a stainless steel clapper assembly for
sizes 2" – 8" (50mm – 200mm), and a ductile iron clapper
assembly for sizes 10" – 12" (250mm – 300mm). A resilient
elastomer seal facing on the spring loaded clapper ensures a
leak tight seal and a non-sticking operation. The GRINNELL
Model 590 Check Valve is designed to minimize water
hammer caused by flow reversal.
VALVES
Tech Data Sheet: G350
The valves are furnished with grooved ends and can be
installed using GRINNELL Couplings. The GRINNELL Model
590 can be installed with GRINNELL Figure 71 Flange
Adapters or ANSI class 300 Flange Adapters. All GRINNELL
Model 590 Check Valves are designed with a removable
cover for ease during field maintenance.
MATERIAL SPECIFICATIONS
Ductile Iron Body and
Cap Specifications
Seal Specifications
• Grade “E” EPDM seals have a Green color code
identification and conform to ASTM D 2000 for
service temperatures from -30°F to 230°F (-34°C to
110°C). They are recommended for hot water not to
exceed 230°F (110°C), plus a variety of dilute acids,
oil free air, and many chemical services. They are not
recommended for petroleum services.
• ASTM A 536 – Standard specification for ductile iron
castings, Grade 65-45-12
• Tensile strength, minimum 65,000 psi (4481,6 bar)
• Yield strength, minimum 45,000 psi (3102,6 bar)
• Elongation in 2" (50mm), minimum 12%
• Grade “T” Nitrile seals have an Orange color
code identification and conform to ASTM D 2000 for
service temperatures from -20°F to 180°F (-29°C to
82°C). They are recommended for petroleum
products, vegetable oils, mineral oils, and air with
oil vapors.
Seat
• Nickel
Coating
•Non-Lead paint
Performance
500
FLOW RATE IN LITRES PER MINUTE (LPM)
(1 GPM = 3,785 LPM)
700
1000
2000
3000
5000
7000
10000
20000
30000
50000
5.0
100
)
150
)
125
)
300
)
DN
INC
H(
1.0
0.9
0.8
0.7
0,10
0,09
0,08
0,07
0,06
12
10
INC
H
8 IN
CH
(DN
250
)
(DN
200
)
DN
CH
(
6 IN
5 IN
CH
4 IN
CH
(DN
(DN
CH
3 IN
0,20
0,05
0.6
0.5
100
NOMINAL PRESSURE DROP IN BAR
(1 PSI = 0,06895 BAR)
65)
0,30
(DN
80)
50)
DN
H(
(DN
CH
INC
2 IN
2.0
/2
3.0
2-1
NOMINAL PRESSURE DROP
IN POUNDS PER SQUARE INCH (PSI)
4.0
0,04
200
300
400
600
1000
2000
3000 4000
6000
10000
15000
FLOW RATE IN GALLONS PER MINUTE (GPM)
94
www.grinnell.com
VALVES
Model 590 Grooved End Check Valves
(Page 2 of 2)
B
A
Tech Data Sheet: G350
C
VALVES
D
E
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
2
2.375
50
60,3
2.875
21 ⁄ 2
65
73,0
76,1mm
3.000
65
76,1
3
3.500
80
88,9
4
4.500
100
114,3
139,7mm
5.500
125
139,7
5
5.563
125
141,3
165,1mm
6.500
150
165,1
6
6.625
150
168,3
8
8.625
200
219,1
10
10.750
250
273,1
12
12.750
300
323,9
Dimensions - Inches mm
A
B
C
D
E
6.75
171,5
8.00
203,2
8.00
203,2
8.38
212,9
9.63
245,6
10.50
266,7
10.50
266,7
11.50
292,1
11.50
292,1
14.00
355,6
18.00
457,2
21.0
533,4
4.38
111,3
5.42
136,7
5.42
136,7
5.76
146,3
6.74
171,2
7.50
190,5
7.50
190,5
8.05
204,4
8.05
204,4
10.25
260,4
13.00
330,2
14.28
362,7
2.55
64,8
3.41
86,6
3.41
86,6
3.60
91,4
4.61
117,1
5.29
134,4
5.29
134,4
5.75
146,1
5.75
146,1
7.75
196,9
10.21
259,3
11.31
287,2
2.57
65,3
3.09
78,5
3.09
78,5
3.31
84,1
3.63
92,2
4.13
104,9
4.13
104,9
4.50
114,3
4.50
114,3
5.62
142,7
6.38
162,1
7.26
184,4
3.25
82,3
3.88
98,6
3.88
98,6
3.88
98,6
4.53
115,4
4.90
124,5
4.90
124,5
5.00
127,0
5.00
127,0
5.45
138,4
7.50
190,5
7.62
193,5
Cover
Bolt Torq.
Lb.-ft.
Nm
Approx.
Weight
Lbs.
kg
15
21
39
54
39
54
39
54
39
54
39
54
39
54
60
82
60
82
120
164
120
164
120
164
9.0
4,5
10.0
4,5
10.0
4,5
11.0
5,0
25.0
11,3
29.0
13,2
29.0
13,2
47.0
21,3
47.0
21,3
66.0
30,0
109.7
49,4
151.0
68,0
For information on larger sizes, contact GRINNELL Mechanical Products.
OUTLET
COVER
FLOW
INLET
COVER
INLET
VERTICAL ORIENTATION
Refer to back cover for country-specific customer care numbers.
OUTLET
FLOW
HORIZONTAL ORIENTATION
95
VALVES
Model TD830 Triple Duty Valves
Tech Data Sheet: G390
The GRINNELL Model TD830 Triple Duty Valve can be
installed quickly into grooved end piping systems using
two GRINNELL Couplings. The externally guided disc has
a soft seat to ensure a leak-tight seal. It lifts 1/3" (8mm) for
each 1" (25,4mm) of pipe diameter. The rising stem design
incorporates a graduated position indicator to ensure
accurate disc positioning for throttling service.
VALVES
The yoke and valve stem are unwetted external parts so they
cannot be corroded or eroded by the line fluid. All mating
threaded parts are made of dissimilar, non-galling metals. An
NPT drain plug is provided, as well as bosses for gauge taps
at the inlet and outlet.
Maximum working pressure is 640 psi (44,1 bar) at 100°F
(38°C) and 565 psi (39 bar) at 300°F (149°C).
The GRINNELL Model TD830 Triple Duty Valve is designed for
installation in pump discharge piping where it functions as a
spring-loaded silent check valve, a balancing valve, and a shut-off
valve.
Note: Pressure and temperature can be limited by gasket material. Contact
GRINNELL Mechanical Products.
B
The GRINNELL Model TD830 Triple Duty Valve operates
automatically and quietly. Line pressure of approximately 0.25
psi (0,02 bar) opens the disc. To prevent flow reversal and water
hammer, the spring closes the disc as the line flow approaches
zero in order. The flow through the valve can be adjusted from
bubble tight shut-off to full-flow by the threaded rising stem.
MATERIAL SPECIFICATIONS
A
Body and Yoke
• Ductile iron conforming to ASTM A 395, Grade
60-40-18 or A 536
C
Disc
• Aluminum bronze ASTM B 142, C 950
Disc Guide and Flanged Gland
• Cast iron conforming to ASTM A 126-B
Spring
• 302 stainless steel
Stem
• Type 316 stainless steel
Stem Guide
• Ductile iron conforming to ASTM A 536 or A 395
O-Rings
• EPDM
Seat
• Bronze
Seat Guide
• Bronze conforming to ASTM B 584 (81-3-7-9)
Finish
• Black paint
Performance
• Pressure drop, contact GRINNELL Mechanical Products.
96
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
2
2.375
50
60,3
21 ⁄ 2
2.875
65
73,0
3
3.500
80
88,9
4
4.500
100
114,3
5
5.563
125
141,3
6
6.625
150
168,3
8
8.625
200
219,1
10
10.750
250
273,1
12
12.750
300
323,9
14
14.000
340
355,6
Dimensions - Inches mm
A
B
OPEN
9.38
238,1
10.25
260,4
11.25
285,8
15.63
397,9
15.625
397,9
19.63
498,5
23.63
600,0
28.00
711,2
31.63
803,3
33.50
851,0
9.63
244,5
9.63
244,5
10.13
257,2
12.63
320,8
11.125
282,6
17.50
444,5
18.00
457,2
21.75
552,5
25.00
635,0
25.000
635,0
C
NPT
1
⁄2
15
1
⁄2
15
1
⁄2
15
1
⁄2
15
1
⁄2
15
3
⁄4
20
3
⁄4
20
1
25
1
25
1
25
Approx.
Weight
Lbs.
kg
23.0
10,0
24.0
10,9
33.0
15,0
84.0
38,0
84.0
38,0
156.0
70,0
300.0
136,0
392.0
178,0
496.0
225,0
790.0
358,3
For information on larger sizes, contact GRINNELL
Mechanical Products.
www.grinnell.com
97
CIRCUIT BALANCING VALVES
Circuit Balancing Valves Table of Contents
Model CB800
Solder Ends
Circuit Balancing Valves
Page 100
GRINNELL Model CB800 Circuit Balancing Valves are
designed to achieve accurate and efficient balancing of
hydronic heating or cooling systems. Circuit Balancing
Valves provide superior accuracy in measuring flows rather
than ball type circuit setters.
The CB800 valve serves 5 functions:
CIRCUIT BALANCING VALVES
Model CB800
Threaded Ends
Circuit Balancing Valves
Page 100
Model CB800
Grooved Ends
Circuit Balancing Valves
Page 101
Model CB800
Flanged Ends
Circuit Balancing Valves
ANSI & PN16/PN10
Page 102 - 103
•
•
•
•
•
Throttling
Measuring differential pressure
Draining
Filling
Positive shutoff
These valves are rated at 300 psi (20,7 bar) at
300°F (150°C).
The valve is made of dezincification-resistant brass and
bronze components. Threaded and solder connections are
available for sizes 1 ⁄ 2" – 2" (15mm – 50mm) sizes with
bronze bodies. Flanged (125#) and grooved connections
are available for sizes 21 ⁄ 2" – 12" (65mm – 300mm) with
cast iron bodies.
The Y-Pattern style provides low pressure drop. The globe
style valve allows for precise throttling. The easy-to-adjust
digital/vernier handwheel provides a minimum of 70 unique
handwheel positions. The handwheel and test ports are located
on one side for easy access. A built-in memory stop ensures
the setting can be returned to a balanced position after shutoff.
The self-sealing pressure/temperature test ports use standard
insertion probes to eliminate additional components.
The GRINNELL Circuit Balancing Valve is installed with flow
in the direction of the arrow, and may be in the horizontal
or vertical position. The handwheel can be positioned up or
down, or on either side.
Model CB800
Insulation Kits
Page 104
Model CB800
MC2 Computer
Page 104
98
www.grinnell.com
CIRCUIT BALANCING VALVES
CB800 Circuit Balancing Valves
Tech Data Sheet: G450
MATERIAL SPECIFICATIONS
Body
• Sizes 1 ⁄ 2" – 2" ( 15mm – 50mm) solder or NPT threaded
connection: brass-resistant to dezincification (DZR)
• Sizes 21 ⁄ 2" – 12" (65mm – 300mm), grooved or flanged
connection: Cast Iron conforming to
ASME ANSI B16.5
Valve Stem and Disc
• Brass resistant to dezincification (DZR)
CIRCUIT BALANCING VALVES
O Ring
• EPDM E
Handwheel
• Thermoplastic
For accessories and replacement parts contact GRINNELL
Mechanical Products for details.
Valve Sizing
1
All balancing valves are sized to perform in a normal
operation range between 25% and 100% of the full open
position, at a minimum differential pressure between 1 –
3 ft. (0,3m – 0,9m) of water. It is recommended that for
improved accuracy, the valve is set to open 70%+.
When maximum flow is known but a pressure drop through
the balancing valve is unknown, select a balancing valve
for a maximum pressure drop of 2 ft. (0,6m) water 0.8 psi
(0,06 bar) in the full open position as shown in the table to
the right.
Accurate flow measurement requires that the velocity
distribution near the balancing valve remains constant,
regardless of the total flow through the pipe. Fittings, such
as elbows and tees, disturb the normal flow profile which is
established through straight pipe. Pumps create even greater
disturbances. Failure to allow water flows around fittings
and pumps to normalize can affect measuring accuracy by
as much as 20% when the valve is in the fully open position.
Minimum lengths (diameters, D) of straight pipe before and
after the balancing valve prevent these errors.
Valves are designed for vertical, horizontal, or inclined
installation.
Minimum Pipe Diameters from Fittings
3D
Size
Inches
mm
2D Pump
10D
2D
Refer to back cover for country-specific customer care numbers.
⁄2
15
3
⁄4
20
1
25
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
8
200
10
250
12
300
Flow Rate
GPM
LPM
2.6 - 4.2
0,687 - 1,110
3.4 - 6.2
0,898 - 1,638
6.2 - 9.6
1,638 - 2,536
9.4 - 21.0
2,483 - 5,548
15 - 30
3,96 - 7,93
22 - 42
5,812 - 11,096
39 - 106
10,30 - 28,01
39 - 106
10,30 - 28,01
60 - 132
15,85 - 34,87
100 - 217
26,42 - 57,33
112 - 317
29,59 - 83,75
112 - 317
29,59 - 83,75
220 - 437
58,12 - 115,46
220 - 437
58,12 - 115,46
223 - 881
58,92 - 232,76
292 - 1298
77,15 - 342,93
616 - 1731
162,75 - 457,33
Connection
Type
Thread
Flanged or
Grooved
99
CIRCUIT BALANCING VALVES
Model CB800 Circuit Balancing Valves
Solder Ends
CIRCUIT BALANCING VALVES
Tech Data Sheet: G450
The GRINNELL Model CB800 Balancing Valve provides features for achieving
accurate and efficient balancing of hydronic heating or cooling systems. One valve
serves five functions: throttling, measuring (pressure and temperature), positive
shutoff, draining and filling. The GRINNELL Solder-by-Solder Model CB800 Valve,
available in sizes 1⁄2" to 2" (15mm to 50mm), is composed of dezincification
resistant brass.
+
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
1
⁄2
0.840
15
21,3
3
⁄4
1.050
20
26,7
1
1.315
25
33,7
1.660
11 ⁄ 4
32
42,4
1.900
11 ⁄ 2
40
48,3
2
2.375
50
60,3
Dimensions - Inches mm
L
H
3.50
88,9
3.81
96,8
4.31
109,5
5.06
128,5
5.56
141,2
6.56
166,6
4.50
114,3
4.56
115,8
4.69
119,1
5.38
136,7
5.44
138,2
5.81
147,6
Approx.
Weight
Lbs.
kg
Limits
PSI/°F
PN/°C
1.4
0,6
1.4
0,6
2.2
1,0
3.0
1,4
3.9
1,7
5.6
2,6
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
Handwheel
Turns
7
7
7
10
10
10
For information on larger sizes, contact GRINNELL Mechanical Products.
See circuit balancing valve specifications on pages 99.
/
Model CB800 Circuit Balancing Valves
Threaded Ends
The GRINNELL Model CB800 Balancing Valve provides features for achieving
Tech Data Sheet: G450
accurate and efficient balancing of hydronic heating or cooling systems. One valve
serves five functions: throttling, measuring (pressure and temperature), positive
shutoff, draining and filling. The GRINNELL Thread-by-Thread Model CB800 Valve,
available in sizes 1⁄2" to 2" (15mm to 50mm), is composed of dezincification
resistant brass.
H
L
100
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
1
⁄2
0.840
15
21,3
3
⁄4
1.050
20
26,7
1
1.315
25
33,7
1.660
11 ⁄ 4
32
42,4
11 ⁄ 2
1.900
40
48,3
2
2.375
50
60,3
Dimensions - Inches mm
L
H
3.13
79,5
3.31
84,1
3.38
85,6
4.38
111,3
4.75
120,7
5.94
150,9
4.13
104,9
4.56
115,8
4.69
119,1
5.38
136,7
5.44
138,2
5.81
147,6
Approx.
Weight
Lbs.
kg
Limits
PSI/°F
PN/°C
1.4
0,6
1.4
0,6
2.2
1,0
3.0
1,4
3.9
1,7
5.6
2,6
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
Handwheel
Turns
7
7
7
10
10
10
For information on larger sizes, contact GRINNELL Mechanical Products.
See circuit balancing valve specifications on pages 99.
www.grinnell.com
CIRCUIT BALANCING VALVES
Model CB800 Circuit Balancing Valves
Grooved Ends
Tech Data Sheet: G450
The GRINNELL Model CB800 Balancing Valve provides features for
achieving accurate and efficient balancing of hydronic heating or cooling
systems. The GRINNELL Groove-by-Groove Model CB800 Valve, available
sizes 21⁄2" to 12" (65mm to 300mm), is composed of cast iron.
The CB800 valve serves 5 functions:
Throttling
Measuring differential pressure
Draining
Filling
Positive shutoff
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
2.875
21 ⁄ 2
65
73,0
76,1mm
3.000
65
76,1
3
3.500
80
88,9
4
4.500
100
114,3
139,7mm
5.500
125
139,7
5
5.563
125
141,3
165,1mm
6.500
150
165,1
6
6.625
150
168,3
8
8.625
200
219,1
10
10.750
250
273,1
12
12.750
300
323,9
Dimensions - Inches mm
L
H
11.44
290,6
11.44
290,6
12.25
311,2
13.75
349,3
15.75
400,0
15.75
400,0
18.88
479,6
18.88
479,6
23.63
600,2
28.75
730,3
33.44
849,4
7.38
187,5
7.38
187,5
8.00
203,2
9.44
239,8
11.13
282,7
11.13
282,7
11.25
285,8
11.25
285,8
18.44
468,4
18.88
479,6
20.25
514,4
Approx.
Weight
Lbs.
kg
Limits
PSI/°F
PN/°C
18.7
8,5
18.7
8,5
27.5
12,5
45.1
20,5
70.4
32,0
70.4
32,0
95.7
43,5
95.7
43,5
255.2
116,0
376.2
171,0
519.2
136,0
300/300
20,7/150
300/300
20,7/150
300/300
20,7/150
300/300
20,7/150
300/300
20,7/150
300/300
20,7/150
300/300
20,7/150
300/300
20,7/150
300/300
20,7/150
300/300
20,7/150
300/300
20,7/150
CIRCUIT BALANCING VALVES
•
•
•
•
•
Handwheel
Turns
8
8
8
8
OD
8
8
8
L
8
12
12
12
H
For information on larger sizes, contact GRINNELL Mechanical Products.
See circuit balancing valve specifications on pages 99.
Refer to back cover for country-specific customer care numbers.
101
CIRCUIT BALANCING VALVES
Model CB800 Circuit Balancing Valves
Flanged Ends, ANSI Class 125#
Tech Data Sheet: G450
The GRINNELL Model CB800 Balancing Valve provides features for achieving
accurate and efficient balancing of hydronic heating or cooling systems. One
valve serves five functions: throttling, measuring (pressure and temperature),
positive shutoff, draining, and filling. The GRINNELL Flange-by-Flange Model
CB800 Valve, available in sizes 21⁄2" to 12" (65mm to 300mm), is composed of
cast iron.
The CB800 valve serves 5 functions:
CIRCUIT BALANCING VALVES
•
•
•
•
•
Throttling
Measuring differential pressure
Draining
Filling
Positive shutoff
Pipe Size
D
L
H
Dimensions - Inches mm
Nominal
Inches
mm
O.D.
Inches
mm
L
H
D
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
8
200
10
250
12
300
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.563
141,3
6.500
165,1
6.625
168,3
8.625
219,1
10.750
273,1
12.750
323,9
11.4
290
11.4
290
12.2
310
13.8
350
15.7
400
15.7
400
18.9
480
18.9
480
23.6
600
28.7
730
33.5
850
7.4
188
7.4
188
8.0
203
9.4
240
11.1
283
11.1
283
11.2
285
11.2
285
18.4
467
18.9
480
20.3
515
7.3
185
7.3
185
7.9
200
8.7
220
9.8
250
9.8
250
11.2
285
11.2
285
13.4
340
15.9
405
19.1
485
Approx.
Weight
Lbs.
kg
Limits
PSI/°F
PN/°C
18.7
13,5
18.7
13,5
39.6
18,0
61.6
28,0
89.1
40,5
89.1
40,5
113.3
51,5
113.3
51,5
284.9
129,5
431.2
196,0
580.8
264,0
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
Handwheel
Turns
8
8
8
8
8
8
8
8
12
12
12
For information on larger sizes, contact GRINNELL Mechanical Products.
See circuit balancing valve specifications on pages 99.
102
www.grinnell.com
CIRCUIT BALANCING VALVES
Model CB800 Circuit Balancing Valves
Flanged Ends, PN16/PN10
Tech Data Sheet: G450
The GRINNELL Model CB800 Balancing Valve provides features for achieving
accurate and efficient balancing of hydronic heating or cooling systems. One
valve serves five functions: throttling, measuring (pressure and temperature),
positive shutoff, draining, and filling. The GRINNELL Flange-by-Flange Model
CB800 Valve, available in sizes 21⁄2" to 12" (65mm to 300mm), is composed of
cast iron.
The CB800 valve serves 5 functions:
Throttling
Measuring differential pressure
Draining
Filling
Positive shutoff
Pipe Size
Dimensions - Inches mm
Nominal
Inches
mm
O.D.
Inches
mm
L
H
D
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
8
200
10
250
12
300
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.563
141,3
6.500
165,1
6.625
168,3
8.625
219,1
10.750
273,1
12.750
323,9
11.4
290
11.4
290
12.2
310
13.8
350
15.7
400
15.7
400
18.9
480
18.9
480
23.6
600
28.7
730
33.5
850
7.4
188
7.4
188
8.0
203
9.4
240
11.1
283
11.1
283
11.2
285
11.2
285
18.4
467
18.9
480
20.3
515
7.3
185
7.3
185
7.9
200
8.7
220
9.8
250
9.8
250
11.2
285
11.2
285
13.4
340
15.9
405
18.1
460
Approx.
Weight
Lbs.
kg
Limits
PSI/°F
PN/°C
18.7
13,5
18.7
13,5
39.6
18,0
61.6
28,0
89.1
40,5
89.1
40,5
113.3
51,5
113.3
51,5
284.9
129,5
431.2
196,0
580.8
264,0
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
235/300
16/150
CIRCUIT BALANCING VALVES
•
•
•
•
•
Handwheel
Turns
8
8
D
8
8
L
8
8
8
8
H
12
12
12
For information on larger sizes, contact GRINNELL Mechanical Products.
See circuit balancing valve specifications on pages 99.
Refer to back cover for country-specific customer care numbers.
103
CIRCUIT BALANCING VALVES
Model CB800 Circuit Balancing Valves
Insulation Kits
The insulation shells have a CFC-free inner core made of
Tech Data Sheet: G450
polyurethane foam with a 0.06" (1,5mm) plastic coat. It consists of
two double shells which are tightened by two metal straps.
CIRCUIT BALANCING VALVES
Available for sizes 1 ⁄2" – 8" (15mm – 200mm). Specify size and endconnection type.
1
Sizes
/2" thru 2"
H
D
L
Sizes
2-1/2" thru 8"
H
D
L
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
1
⁄2
0.840
15
21,3
3
⁄4
1.050
20
26,7
1
1.315
25
33,7
11 ⁄ 4
1.660
32
42,4
11 ⁄ 2
1.900
40
48,3
2
2.375
50
60,3
21 ⁄ 2
2.875
65
73,0
3
3.500
80
88,9
4
4.500
100
114,3
5
5.563
125
141,3
6
6.625
150
168,3
8
8.625
200
219,1
Dimensions - Inches mm
D
H
L
2.72
69
3.31
77
3.35
85
3.82
97
4.13
105
4.72
120
10.2
260
11.0
280
12.6
320
14.2
360
15.7
400
17.6
450
5.35
136
5.63
143
5.94
151
6.77
172
7.28
185
8.23
209
16.1
410
16.3
415
20.5
520
22.1
560
23.6
600
30.0
760
7.20
183
7.68
195
9.57
243
10.00
254
9.84
250
10.87
276
19.9
505
20.9
530
22.8
580
24.4
620
28.7
730
31.5
800
Approx.
Weight
Lbs.
kg
0.3
0.15
0.4
0.18
0.5
0.22
0.4
0.20
0.7
0.33
0.9
0.43
6.7
3.06
7.2
3.25
11.4
5.16
11.6
5.24
13.2
5.97
◆
-
For information on larger sizes, contact GRINNELL Mechanical Products.
◆ Contact GRINNELL Mechanical Products for details.
Model CB800 Circuit Balancing Valves
MC2 Measuring Computer The GRINNELL Model MC2 computer is a hand-held computerTech Data Sheet: G450
balancing instrument designed to measure the flow in GRINNELL
Balancing Valves from 1⁄2" – 12" (15mm – 300mm). The GRINNELL
Model MC2 computer:
•
•
•
•
Automatically calculates the flow rate for a valve.
Measures differential pressure and temperature.
Compares the actual and nominal flow values.
Displays the required presetting value.
All results may be saved in the hand-held computer and can be
downloaded to a PC at a later time.
The easy-to-operate touch button keypad protects against water
and dirt particles. The hand-held computer is supplied with a
rechargeable power pact. All parts of the hand-held computer are
stored in a convenient carrying case.
Note: Only available in select regions, contact GRINNELL
Mechanical Products.
104
www.grinnell.com
105
ACCESSORIES
Accessories Table of Contents
Figure S853
"Y" Strainers
Page 107
GRINNELL accessories are designed to provide protection
for Mechanical piping system equipment. GRINNELL Suction
Diffusers and Strainers reduce maintenance time and labor
and allow easy access to the piping system.
ACCESSORIES
Figure S810
Suction Diffusers
Pages 108 - 109
Figure S855
Tee Strainers
Page 110
Figure 7550
Expansion Joints
Pages 111 - 116
106
www.grinnell.com
ACCESSORIES
Figure S853 “Y” Strainers
Tech Data Sheet: G420
The GRINNELL Figure S853 “Y” Strainer is rated for 640
psi (44,1 bar) at 100°F (38°C) and 150 psi (10,3 bar)
at 565°F (296°C). The “Y” Strainer provides economical
strainer protection for piping equipment such as pumps,
meters, valves, compressors, and traps. The inlet and outlet
ends are suitable for installation with Figure 705, 707, and
772 Couplings.
The Figure S853 “Y” Strainer screen has the following
standard perforations:
• Sizes 2" – 4" (50mm – 100mm) = 1⁄16" ( 1,6mm)
• Sizes 5" – 12" (125mm – 300mm) = 1⁄8" ( 3,2mm)
All covers have an NPT blow-off outlet (pipe plugs not
included) and recessed seat in the cover to ensure screen
alignment.
ACCESSORIES
A
Self-cleaning occurs by opening the valve (not supplied)
connected to the blow-off outlet. Indicate when ordering
strainers that are mounted in vertical piping so that the cover
will be rotated to position the blow-off at the lowest point.
Note: Pressure and temperature can be limited by gasket material.
Contact GRINNELL Mechanical Products.
B
MATERIAL SPECIFICATIONS
D
C
(NPT)
Ductile Iron Body and Cover
Specifications
• ASTM A 536, Grade 65-45-12 – Standard
specification for ductile iron castings
• Tensile strength, minimum 65,000 psi (4481,6 bar)
• Yield strength, minimum 45,000 psi (3102,6 bar)
• Elongation in 2" (50mm), minimum 12%
Screen
• Type 304 Stainless Steel ASTM A 240.
(Other alloys are available, contact GRINNELL
Mechanical Products)
Gasket
• Non-asbestos
Coating
• Black enamel paint
Performance
• Pressure drop, contact GRINNELL
Mechanical Products.
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
2
2.375
50
60,3
2.875
21 ⁄ 2
65
73,0
3
3.500
80
88,9
4
4.500
100
114,3
5
5.563
125
141,3
6
6.625
150
168,3
8
8.625
200
219,1
10
10.750
250
273,1
12
12.750
300
323,9
Dimensions - Inches mm
A
B
C*
7.88
200,2
10.00
254,0
10.13
257,3
12.13
308,1
15.63
397,0
18.50
469,9
21.63
549,4
29.13
739,8
33.75
857,3
5.25
133,4
6.50
165,1
7.00
177,8
8.25
209,6
11.25
285,8
13.50
342,9
15.50
393,7
19.25
489,0
22.88
581,0
0.50
12,7
1.00
25,4
1.00
25,4
1.50
38,1
2.00
50,8
2.00
50,8
2.00
50,8
2.00
50,8
2.00
50,8
D
Screen
Removal
7.00
177,8
9.75
247,7
10.00
254,0
12.00
304,8
17.00
431,8
20.00
508,0
22.75
577,9
29.25
743,0
35.24
895,4
Approx.
Weight
Lbs.
kg
12.0
5,4
18.0
8,2
23.0
10,4
42.0
19,1
80.0
36,3
112.0
50,8
205.0
93,0
277.0
125,6
470.0
213,2
* Blow-off outlet threads conforming to BSP are available upon request.
Contact GRINNELL Mechanical Products.
For information on larger sizes, contact GRINNELL Mechanical Products.
Refer to back cover for country-specific customer care numbers.
107
ACCESSORIES
Figure S810 Suction Diffusers
(Page 1 of 2)
The GRINNELL Figure S810 Suction Diffuser is compact and
rugged for direct mounting to the suction side of a pump
in either a horizontal or vertical position. In addition to
removing foreign particles, this diffuser also provides proper
flow conditions to the pump. Where space is limited, this
diffuser can be used to replace the straight pipe normally
required to reduce turbulence.
Tech Data Sheet: G410
The GRINNELL Figure S810 Suction Diffuser’s permanent
perforated stainless steel screen helps remove foreign
particles. The inlet end is suitable for installation with
GRINNELL Couplings. The outlet end is provided with a
150# ANSI flat face flange. Integral straightening vanes in
the diffuser outlet reduce turbulence so that stress and erosion
on the pump is minimized.
ACCESSORIES
Maximum working pressure is 300 psi (20,7 bar) at 100°F
(38°C) and 165 psi (11,4 bar) at 300°F (149°C).
MATERIAL SPECIFICATIONS
Body and Cover
Note: Pressure and temperature can be limited by O-ring material.
Contact GRINNELL Mechanical Products.
• Ductile iron conforming to ASTM A 126B
Knobs
• Ductile iron conforming to ASTM A 536, Grade
65-45-12 for sizes 3" x 2" thru 10" x 8" (80mm x
50mm thru 250mm x 200mm)
Stud/nuts carbon steel conforming to ASTM A 193-4,
for sizes 10" x 10" (250mm x 250mm) and larger
Screen
A
F
B
• 5 ⁄32" ( 4,0mm) perforated type 304 stainless steel for
sizes 3" x 2" thru 6" x 6"
(80mm x 50mm thru 150mm x 150mm);
C
• 1 ⁄8" ( 3,2mm) perforated type 304 stainless steel for
sizes 8" x 5" (200 x 125mm) and larger
G
• Sleeve is 20 mesh type 304 stainless steel
Coating
H
D
• Black enamel paint
E
Performance
• Pressure drop, contact GRINNELL
Mechanical Products.
Pipe Size
Nominal
Inches
mm
2x2
50 x 50
21 ⁄ 2 x 2
65 x 50
21 ⁄ 2 x 21 ⁄ 2
65 x 65
3x2
80 x 50
3 x 21 ⁄ 2
80 x 65
108
O.D.
Inches
mm
2.375 x 2.375
60,3 x 60,3
2.875 x 2.375
73,0 x 60,3
2.875 x 2.875
73,0 x 73,0
3.500 x 2.375
88,9 x 60,3
3.500 x 2.875
88,9 x 73,0
A
B
C
4.50
114,3
5.00
127,0
5.00
127,0
5.50
139,7
5.50
139,7
4.50
114,3
5.00
127,0
5.00
127,0
5.50
139,7
5.50
139,7
6.69
169,9
7.50
190,5
7.50
190,5
8.44
214,4
8.44
214,4
Dimensions - Inches mm
F
D
E
Screen
Removal
6.13
10.19
8.81
155,7
258,8
223,8
6.56
10.88
9.13
166,6
276,4
231,9
6.56
10.88
9.13
166,6
276,4
231,9
7.38
11.56
9.63
187,5
293,6
244,6
7.38
11.56
9.63
187,5
293,6
244,6
G
Plug
NPT
0.75
20
0.75
20
0.75
20
0.75
20
0.75
20
H
Pipe
Support ID
0.824
20,9
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
Approx.
Weight
Lbs.
kg
19
8,6
20
9,1
22
10,0
38.0
17,2
39.0
17,7
www.grinnell.com
ACCESSORIES
Figure S810 Suction Diffusers
(Page 2 of 2)
Tech Data Sheet: G410
A
B
C
5.50
139,7
5.75
146,1
6.50
165,1
6.50
165,1
6.50
165,1
6.50
165,1
6.50
165,1
7.50
190,5
8.00
203,2
8.00
203,2
8.00
203,2
8.00
203,2
9.00
228,6
9.00
228,6
9.00
228,6
9.48
240,8
9.00
228,6
11.00
279,4
9.00
228,6
11.00
279,4
12.00
304,8
11.00
279,4
12.00
304,8
14.00
355,6
14.00
355,6
5.50
139,7
5.75
146,1
6.50
165,1
6.81
173,0
6.81
173,0
6.50
165,1
6.50
165,1
7.50
190,5
8.00
203,2
8.00
203,2
8.00
203,2
8.00
203,2
9.00
228,6
10.00
254,0
10.00
254,0
9.48
240,8
11.75
298,5
11.75
298,5
9.00
228,6
12.88
327,2
12.00
304,8
11.00
279,4
12.00
304,8
14.00
355,6
14.00
355,6
8.44
214,4
9.13
231,9
10.48
266,2
10.44
265,2
10.44
265,2
10.48
266,2
11.94
303,3
11.94
303,3
13.31
338,1
13.31
338,1
13.31
338,1
13.31
338,1
14.38
365,3
15.31
388,9
16.31
414,3
15.50
393,7
18.44
468,4
20.00
508,0
19.63
498,6
21.00
533,4
22.06
560,3
22.50
571,5
22.38
568,5
25.00
635,0
26.00
660,4
Dimensions - Inches mm
F
D
E
Screen
Removal
7.38
11.56
9.63
187,5
293,6
244,6
7.63
11.81
11.18
193,8
300,0
284,0
8.75
13.13
9.63
222,3
333,5
244,6
8.75
13.13
11.50
222,3
333,5
292,1
8.75
13.13
11.50
222,3
333,5
292,1
8.75
13.13
11.50
222,3
333,5
292,1
10.00
15.75
14.00
254,0
400,1
355,6
10.00
15.75
14.88
254,0
400,1
378,0
10.50
16.88
16.56
266,7
428,8
420,6
10.50
16.88
16.56
266,7
428,8
420,6
10.50
16.88
16.56
266,7
428,8
420,6
10.50
16.88
16.56
266,7
428,8
420,6
11.50
17.88
16.88
292,1
454,2
428,8
11.50
17.88
16.88
292,1
454,2
428,8
11.75
20.75
22.88
298,5
527,1
581,2
11.94
18.31
16.88
303,3
465,1
428,8
11.75
20.75
22.88
298,5
527,1
581,2
14.00
26.38
30.75
355,6
670,1
781,1
11.75
20.75
22.88
298,5
527,1
581,2
14.00
26.38
30.75
355,6
670,1
781,1
15.25
26.18
30.75
387,4
665,0
781,1
14.00
26.38
30.75
355,6
670,1
781,1
15.25
26.18
31.00
387,4
665,0
787,4
17.50
27.75
33.13
444,5
704,9
841,5
17.50
27.88
31.00
444,5
708,2
787,4
G
Plug
NPT
0.75
20
0.75
20
1.00
25
1.00
25
1.00
25
1.00
25
1.00
25
1.00
25
1.00
25
1.00
25
1.00
25
1.00
25
1.00
25
1.00
25
1.25
32
1.25
32
1.25
32
1.25
32
1.25
32
1.25
32
1.25
32
1.25
32
1.25
32
2.00
50
2.00
50
H
Pipe
Support ID
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
1.38
35,1
Approx.
Weight
Lbs.
kg
40.0
18,1
48.0
21,8
49.0
22,2
50.0
22,7
52.0
23,6
94.0
42,6
96.0
43,5
101.0
45,8
103.0
46,7
106.0
48,1
110.0
49,9
113.0
51,2
135.0
61,2
137.0
62,1
222.0
100,7
230.0
104,3
236.0
107,0
343.0
155,6
357.0
161,9
357.0
161,9
357.0
161,9
507.0
229,9
601.0
272,6
706.0
320,2
750.0
340,1
ACCESSORIES
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
3x3
3.500 x 3.500
88,9 x 88,9
80 x 80
4x2
4.500 x 2.375
100 x 50
114,3 x 60,3
4.500 x 2.875
4 x 21 ⁄ 2
100 x 65
114,3 x 73,0
4x3
4.500 x 3.500
100 x 80
114,3 x 88,9
4x4
4.500 x 4.500
100 x 100
114,3 x 114,3
5x3
5.563 x 3.500
125 x 80
141,3 x 88,9
5x4
5.563 x 4.500
125 x 100
141,3 x 114,3
5x5
5.563 x 5.563
125 x 125
141,3 x 141,3
6x3
6.625 x 3.500
150 x 80
168,3 x 88,9
6x4
6.625 x 4.500
150 x 100
168,3 x 114,3
6x5
6.625 x 5.563
150 x 125
168,3 x 141,3
6x6
6.625 x 6.625
150 x 150
168,3 x 168,3
8x5
8.625 x 5.563
200 x 125
219,1 x 141,3
8x6
8.625 x 6.625
200 x 150
219,1 x 168,3
8x8
8.625 x 8.625
200 x 200
219,1 x 219,1
10 x 6
10.750 x 6.625
250 x 150
273,1 x 168,3
10 x 8
10.750 x 8.625
250 x 200
237,1 x 219,1
10 x 10
10.750 x 10.750
250 x 250
273,1 x 273,1
12 x 8
12.000 x 8.625
300 x 200
323,9 x 219,1
12 x 10
12.000 x 10.750
300 x 250
323,9 x 273,1
12 x 12
12.000 x 12.000
300 x 300
323,9 x 323,9
14 x 10
14.000 x 10.750
350 x 250
355,6 x 273,1
14 x 12
14.000 x 12.000
350 x 300
355,6 x 323,9
14 x 14
14.000 x 14000
350 x 350
355,6 x 355,6
16 x 14
16.000 x 14.000
400 x 350
406,4 x 355,6
For information on larger sizes, contact GRINNELL Mechanical Products.
Refer to back cover for country-specific customer care numbers.
109
ACCESSORIES
Figure S855 Tee Strainers
Tech Data Sheet: G430
The Tee Strainer is designed to remove particles from pipelines
where a compact, accessible strainer is needed for the
protection of pumps, meters, valves, and similar mechanical
equipment. The inlet and outlet ends are suitable for
installation with GRINNELL Couplings that provide quick and
easy installation.
The cover is secured by a GRINNELL Figure 772 Coupling for
easy access to the screen. The cover is tapped and plugged to
allow for draining.
ACCESSORIES
The GRINNELL Figure S855 Tee Strainer is rated for the
following pressures:
D
• Sizes 2" – 5" (50mm – 125mm): 750 psi (51,7 bar) at
100°F (38°C)
• Size 6" (150mm): 700 psi (48,3 bar) at 100°F (38°C)
• Size 8" (200mm): 600 psi (41,7 bar) at 100°F (38°C)
• Size 10" (250mm): 500 psi (34,5 bar) at 100°F (38°C)
• Size 12" (300mm): 400 psi (27,6 bar) at 100°F (38°C)
B
The Figure S855 Tee Strainer perforated screen has the
following perforations:
A
• Sizes 2" – 6" (50mm – 150mm) = 1 ⁄8" ( 3,2mm)
• Sizes 8" – 12" (200mm – 300mm) = 5⁄32" ( 4,0mm)
Note: Other perforation screen sizes are available upon request. Specify
particle retention size when ordering nonstandard screens.
MATERIAL SPECIFICATIONS
Ductile Iron Body and Cover
• ASTM A 395, Grade 60-40-18 or A 536 – Standard
specification for ductile iron castings
• Tensile strength, minimum 65,000 psi (4481,6 bar)
• Yield strength, minimum 45,000 psi (3102,6 bar)
• Elongation in 2" (50mm), minimum 12%
Screen
• 20 gauge type 304 stainless steel ASTM A 240
for Sizes 2" – 6" (50mm – 150mm)
• 18 gauge type 304 stainless steel ASTM A 240
for Sizes 8" – 12" (200mm – 300mm)
Coating
• Black enamel paint
• Orange – Non-lead paint
• Red – Non-lead paint (optional, regional)
Performance
• Pressure drop, contact GRINNELL
Mechanical Products.
110
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
2
2.375
50
60,3
2.875
21 ⁄ 2
65
73,0
3
3.500
80
88,9
4
4.500
100
114,3
5
5.563
125
141,3
6
6.625
150
168,3
8
8.625
200
219,1
10
10.750
250
273,0
12
12.750
300
323,9
Dimensions - Inches mm
D
A
B
Screen
Removal
6.50
4.25
7.50
165,0
108,0
191,0
7.50
4.75
8.75
191,0
110,0
222,0
8.50
5.25
10.00
216,0
133,0
254,0
10.00
6.13
12.00
254,0
156,0
305,0
11.00
6.63
13.50
279,0
168,0
342,0
13.00
7.63
16.00
330,0
194,0
406,0
15.50
9.13
19.44
394,0
232,0
494,0
18.00
10.38
22.94
457,0
264,0
583,0
20.00
11.38
25.94
508,0
289,0
659,0
Approx.
Weight
Lbs.
kg
6.0
2,7
11.0
5,0
12.0
5,4
20.0
9,0
30.0
13,0
40.0
18,0
81.0
36,0
126.0
57,0
174.0
79,0
For information on larger sizes, contact GRINNELL
Mechanical Products.
www.grinnell.com
ACCESSORIES
Figure 7550 Expansion Joint
GRINNELL Grooved Expansion Joints are custom-designed,
thermal movement solutions that utilize the proven design
characteristics of GRINNELL Flexible Couplings.
(Page 1 of 6)
Tech Data Sheet: G460
Expansion joints are designed to be used in both hot and
cold applications. When pipe heats up, the expansion
joint contracts to absorb the thermal expansion of the pipe.
When pipe cools down, the expansion joint expands to
absorb the thermal contraction of the pipe.
The expansion joints are factory fabricated and calibrated
to the specific thermal movement conditions of the piping
runs. The joints are manufactured from machined grooved
nipples and GRINNELL Flexible Couplings, providing
dependable, high pressure performance.
Nipples are manufactured from standard wall, A 53B black
steel pipe.
Figure 7550 Expansion joints are custom designed to your
specifications. Contact GRINNELL Mechanical Services for
additional information.
ACCESSORIES
Expansion Joints should be anchored and guided in
accordance with standard industry practices. Refer to the
appropriate coupling data sheet for pressure/temperature
ratings and materials of construction.
Ordering Procedure
GRINNELL Mechanical Products are available globally through
a network of distribution centers. Visit www.grinnell.com for
the nearest distributor. When placing an order, indicate the full
product name.
Use the worksheet shown below to specify information required
for ordering expansion joints.
Specify quantity, nominal pipe size, (ANSI or O.D.), figure
number (Figure 7550 Flexible Coupling), and type of gasket:
• Grade “E” EPDM
• Grade “L” Silicone
• Grade “O” Fluoroelastomer
• Grade “T” Nitrile
Nominal Pipe Size
11 ⁄ 4" to 16" (32mm to 400mm):
Inches mm
Pipe
Finish
Coupling
Finish
Gasket
Material*
Factory
Preset
Total
Required
Movement:
F
F
F
Black
Galvanized
Stainless Steel
F
F
F
F
Orange
Paint
RAL Red
Galvanized
Stainless
Steel
F
F
F
F
Grade “E”
EPDM
Grade “T”
Nitrile
Grade “O”
Fluoroelastomer
Grade “L”
Silicone
F
F
Fully
Expanded
Fully
Compressed
1.00"
1.25"
Intermediate**
%
1.50"
1.75"
* These products are assembled with a silicone-based lubricant.
** For intermediate factory preset indicate percentage of movement
from compressed position.
Refer to back cover for country-specific customer care numbers.
111
ACCESSORIES
Figure 7550 Expansion Joint
Figure 7550 Expansion Joints
Nominal Dimensions for End Elevation View
(Page 2 of 6)
Tech Data Sheet: G460
Pipe Size
W
ACCESSORIES
Y
Dimensions - Inches mm
Nominal
Inches
mm
O.D.
Inches
mm
Y
Coupling
Length
W
Overall
Width
Coupling
Movement
Capability
Inches
mm
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
3
80
4
100
5
125
6
150
8
200
10
250
12
300
14
350
16
400
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.500
88,9
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
14.000
355,6
16.000
406,4
4.190
106,4
4.440
112,8
4.880
124,0
5.500
139,7
6.500
165,1
7.750
196,9
9.750
247,7
10.690
271,5
13.560
344,4
16.380
416,1
18.880
479,6
20.380
517,7
22.640
575,1
9.750
247,7
9.625
244,5
10.875
276,2
10.750
273,1
11.750
298,5
12.937
328,6
14.250
362,0
15.500
393,7
18.250
463,6
20.125
511,2
22.375
568,3
24.125
612,8
27.870
707,9
0.125
3,18
0.125
3,18
0.125
3,18
0.125
3,18
0.125
3,18
0.250
6,35
0.250
6,35
0.250
6,35
0.250
6,35
0.250
6,35
0.250
6,35
0.250
6,35
0.250
6,35
Refer to Technical Data Sheet G460 for additional dimensions and information.
EXPANSION
JOINT
DO NOT ALLOW
SUPPORT CRADLE FLANGES TO
INTERFERE WITH COUPLING
LOBES, NUTS OR BOLTS
ENSURE SUPPORT
CRADLE FLANGES CONTACT
ONLY TANGENT TO
COUPLING HOUSINGS
EXPANSION
JOINT
RETAINING
BRACKET
SUPPORT
CRADLE
(FABRICATED
BY OTHERS)
Figure 7550 Expansion Joints
Retaining Bracket Detail
EXPANSION JOINT
Figure 7550 Expansion Joints
Typical Installation
ANCHOR
112
END COUPLINGS
(NOT INCLUDED)
GUIDES
ANCHOR
www.grinnell.com
ACCESSORIES
Figure 7550 Expansion Joint
(Page 3 of 6)
Tech Data Sheet: G460
L
Z
X
Figure 7550-1 Expansion Joints - 1" Total Movement Length
Nominal Pipe Size
ANSI
Inches
mm
O.D.
Inches
mm
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
3
80
4
100
5
125
6
150
8
200
10
250
12
300
14
350
16
400
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.500
88,9
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
14.000
355,6
16.000
406,4
Flexible*
Coupling
Figure /
Quantity
705 / 8
705 / 8
705 / 8
705 / 8
705 / 8
705 / 4
705 / 4
705 / 4
705 / 4
705 / 4
705 / 4
707 / 4
707 / 4
X
Coupling
Height
Inches
mm
2.560
65,02
2.750
69,85
3.250
82,55
3.690
93,73
4.380
111,25
5.690
144,53
6.880
174,75
7.940
201,68
10.190
258,83
12.690
322,33
14.940
379,48
16.670
423,42
18.830
478,28
Z
Tie
Location
Inches
mm
1.25
31,75
1.25
31,75
1.25
31,75
1.25
31,75
1.25
31,75
1.25
31,75
1.25
31,75
1.25
31,75
1.375
34,93
1.375
34,93
1.375
34,93
1.500
38,10
1.500
38,10
L
Compressed
Length
Inches
mm
26.625
676,27
26.625
676,27
26.625
676,27
26.625
676,27
26.625
676,27
17.500
444,50
17.500
444,50
17.500
444,50
19.125
488,95
21.500
546,10
21.500
546,10
23.125
587,40
24.125
612,77
L
Expanded
Length
Inches
mm
27.625
701,67
27.625
701,67
27.625
701,67
27.625
701,67
27.625
701,67
18.500
469,90
18.500
469,90
18.500
469,90
20.125
511,17
22.500
571,50
22.500
571,50
24.125
612,77
25.125
638,17
Total
Movement
Capability
Inches
mm
1.000
25,40
1.000
25,40
1.000
25,40
1.000
25,40
1.000
25,40
1.000
25,40
1.000
25,40
1.000
25,40
1.000
25,40
1.000
25,40
1.000
25,40
1.000
25,40
1.000
25,40
ACCESSORIES
Nominal Dimensions for Side Elevation View
Approx.
Weight
Lbs.
kg
26
11,8
28
12,7
31
14,1
37
16,8
49
22,2
36
16,3
53
24,0
59
26,8
104
47,2
179
81,2
235
106,6
305
138,4
371
168,2
* 11 ⁄4" - 8" Figure 405 Stainless Steel Couplings available upon request.
Refer to back cover for country-specific customer care numbers.
113
ACCESSORIES
Figure 7550 Expansion Joint
(Page 4 of 6)
Tech Data Sheet: G460
L
Z
X
ACCESSORIES
Figure 7550-13 Expansion Joints - 11⁄4" Total Movement Length
Nominal Dimensions for Side Elevation View
Nominal Pipe Size
ANSI
Inches
mm
O.D.
Inches
mm
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
3
80
4
100
5
125
6
150
8
200
10
250
12
300
14
350
16
400
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.500
88,9
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
14.000
355,6
16.000
406,4
Flexible*
Coupling
Figure /
Quantity
705 / 10
705 / 10
705 / 10
705 / 10
705 / 10
705 / 5
705 / 5
705 / 5
705 / 5
705 / 5
705 / 5
707 / 5
707 / 5
X
Coupling
Height
Inches
mm
2.560
65,02
2.750
69,85
3.250
82,55
3.690
93,73
4.380
111,25
5.690
144,53
6.880
174,75
7.940
201,68
10.190
258,83
12.690
322,33
14.940
379,48
16.670
423,42
18.830
478,28
Z
Tie
Location
Inches
mm
1.25
31,75
1.25
31,75
1.25
31,75
1.25
31,75
1.25
31,75
1.25
31,75
1.25
31,75
1.25
31,75
1.375
34,93
1.375
34,93
1.375
34,93
1.500
38,10
1.500
38,10
L
Compressed
Length
Inches
mm
31.375
796,92
31.375
796,92
31.375
796,92
31.375
796,92
31.375
796,92
20.000
508,00
20.000
508,00
20.000
508,00
22.000
558,80
24.500
622,30
24.500
622,30
26.500
673,10
27.500
698,50
L
Expanded
Length
Inches
mm
32.625
828,67
32.625
828,67
32.625
828,67
32.625
828,67
32.625
828,67
21.250
539,75
21.250
539,75
21.250
539,75
23.250
590,55
25.750
654,05
25.750
654,05
27.750
704,85
28.750
730,25
Total
Movement
Capability
Inches
mm
1.250
31,75
1.250
31,75
1.250
31,75
1.250
31,75
1.250
31,75
1.250
31,75
1.250
31,75
1.250
31,75
1.250
31,75
1.250
31,75
1.250
31,75
1.250
31,75
1.250
31,75
Approx.
Weight
Lbs.
kg
31
14,1
33
15,0
37
16,8
45
20,4
59
26,8
43
19,5
64
29,0
70
31,8
125
56,7
215
97,5
281
127,5
365
138,4
441
168,2
* 11 ⁄4" - 8" Figure 405 Stainless Steel Couplings available upon request.
114
www.grinnell.com
ACCESSORIES
Figure 7550 Expansion Joint
(Page 5 of 6)
Tech Data Sheet: G460
L
Z
X
ACCESSORIES
Figure 7550-15 Expansion Joints - 11⁄2" Total Movement Length
Nominal Dimensions for Side Elevation View
Nominal Pipe Size
ANSI
Inches
mm
O.D.
Inches
mm
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
3
80
4
100
5
125
6
150
8
200
10
250
12
300
14
350
16
400
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.500
88,9
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
14.000
355,6
16.000
406,4
Flexible*
Coupling
Figure /
Quantity
705 / 12
705 / 12
705 / 12
705 / 12
705 / 12
705 / 6
705 / 6
705 / 6
705 / 6
705 / 6
705 / 6
707/ 6
707 / 6
X
Coupling
Height
Inches
mm
2.560
65,02
2.750
69,85
3.250
82,55
3.690
93,73
4.380
111,25
5.690
144,53
6.880
174,75
7.940
201,68
10.190
258,83
12.690
322,33
14.940
379,48
16.670
423,42
18.830
478,28
Z
Tie
Location
Inches
mm
1.25
31,75
1.25
31,75
1.25
31,75
1.25
31,75
1.25
31,75
1.25
31,75
1.25
31,75
1.25
31,75
1.375
34,93
1.375
34,93
1.375
34,93
1.500
38,10
1.500
38,10
L
Compressed
Length
Inches
mm
36.125
917,57
36.125
917,57
36.125
917,57
36.125
917,57
36.125
917,57
22.500
571,50)
22.500
571,50
22.500
571,50
24.875
631,82
27.500
698,50
27.500
698,50
29.875
758,82
30.875
784,22
L
Expanded
Length
Inches
mm
37.625
955,68
37.625
955,68
37.625
955,68
37.625
955,68
37.625
955,68
24.000
609,60)
24.000
609,60
24.000
609,60
26.375
669,93
29.000
736,60
29.000
736,60
31.375
796,93
32.375
822,32
Total
Movement
Capability
Inches
mm
1.500
38,10
1.500
38,10
1.500
38,10
1.500
38,10
1.500
38,10
1.500
38,10
1.500
38,10
1.500
38,10
1.500
38,10
1.500
38,10
1.500
38,10
1.500
38,10
1.500
38,10
Approx.
Weight
Lbs.
kg
37
16,8
39
17,7
43
19,5
52
23,6
69
31,3
50
22,7)
74
33,6
81
36,7
145
65,8
251
113,8
328
148,8
425
192,8
512
232,2
* 11 ⁄4" - 8" Figure 405 Stainless Steel Couplings available upon request.
Refer to back cover for country-specific customer care numbers.
115
ACCESSORIES
Figure 7550 Expansion Joint
(Page 6 of 6)
Tech Data Sheet: G460
L
Z
X
Figure 7550-75 Expansion Joints - 13⁄4" Total Movement Length
ACCESSORIES
Nominal Dimensions for Side Elevation View
Nominal Pipe Size
ANSI
Inches
mm
O.D.
Inches
mm
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
3
80
4
100
5
125
6
150
8
200
10
250
12
300
14
350
16
400
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.500
88,9
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
14.000
355,6
16.000
406,4
Flexible*
Coupling
Figure /
Quantity
705 / 14
705 / 14
705 / 14
705 / 14
705 / 14
705 / 7
705 / 7
705 / 7
705 / 7
705 / 7
705 / 7
707 / 7
707 / 7
X
Coupling
Height
Inches
mm
2.560
65,02
2.750
69,85
3.250
82,55
3.690
93,73
4.380
111,25
5.690
144,53
6.880
174,75
7.940
201,68
10.190
258,83
12.690
322,33
14.940
379,48
16.670
423,42
18.830
478,28
Z
Tie
Location
Inches
mm
1.25
31,75
1.25
31,75
1.25
31,75
1.25
31,75
1.25
31,75
1.25
31,75
1.25
31,75
1.25
31,75
1.375
34,93
1.375
34,93
1.375
34,93
1.500
38,10
1.500
38,10
L
Compressed
Length
Inches
mm
40.875
1038,22
40.875
1038,22
40.875
1038,22
40.875
1038,22
40.875
1038,22
25.000
635,00
25.000
635,00
25.000
635,00
27.750
704,85
30.500
774,70
30.500
774,70
33.250
844,55
34.250
869,95
L
Expanded
Length
Inches
mm
42.625
1082,67
42.625
1082,67
42.625
1082,67
42.625
1082,67
42.625
1082,67
26.750
679,45
26.750
679,45
26.750
679,45
29.500
749,30
32.250
819,15
32.250
819,15
35.000
889,00
36.000
914,40
Total
Movement
Capability
Inches
mm
1.750
44,45
1.750
44,45
1.750
44,45
1.750
44,45
1.750
44,45
1.750
44,45
1.750
44,45
1.750
44,45
1.750
44,45
1.750
44,45
1.750
44,45
1.750
44,45
1.750
44,45
Approx.
Weight
Lbs.
kg
42
19,0
45
20,4
49
22,2
60
27,2
79
35,8
57
25,9
84
38,1
92
41,7
166
75,3
287
130,2
375
170,1
486
220,5
583
264,4
* 11 ⁄4" - 8" Figure 405 Stainless Steel Couplings available upon request.
116
www.grinnell.com
117
COPPER SYSTEMS
Copper Systems Table of Contents
COPPER SYSTEMS
GRINNELL Copper Grooved Systems are designed for joining copper tube size components 2" to 8" (DN 50 to DN 200) type K,
L, M, and DWV. All couplings and fittings are rated for working pressures up to 300 psi (20,7 bar) depending on copper tubing
size and type (see pressure rating chart).
118
Figure 640
Pivot-Bolt Rigid Couplings
Page 120
Figure 618
Reducing Tees
Page 126
Figure 672
Rigid Couplings
Page 121
Figures 650
Concentric Reducers
Page 127
Figure 61
Flange Adapters
Page 122
Figures 652
Concentric Reducers
Page 127
Figure 610
90° Elbows
Page 123
Model B680
Butterfly Valves
Page 128
Figure 601
45° Elbows
Page 123
Figure 407GT
Dielectric Waterway
Page 129
Figure 619
Tees
Page 124
Figure 407T
Dielectric Waterway
Page 129
Figure 660
Caps
Page 124
Figure 407GG
Dielectric Waterway
Transition Fitting
Page 130
Figure 621
Reducing Tees
Page 125
Model 1039-66
Copper Roll Groover
Page 130
www.grinnell.com
COPPER SYSTEMS
Coupling Specifications
The applicable material specifications for ductile iron and
rubber gaskets apply:
Ductile Iron Housing Specifications
• ASTM A 536 – Standard Specification for Ductile Iron
Castings Grade 65-45-12
Coatings
• Copper – Acrylic Enamel
Gasket Specifications
• Tri-Seal Grade “EN” EPDM, NSF 61 Approved
compound, has a Copper color code, for potable water
systems up to 180°F (82°C). Not recommended for
petroleum service.
• Grade “EHT” EPDM NSF-61 Certified
Center-Stop, Push-On Style gaskets for copper tubing
systems, have a Red and Copper stripped color code.
For closed-loop heating systems from -30°F to 250°F
(-34°C to 120°C) and potable water systems up to
180°F (82°C). Recommended for use in low temperature
and vacuum systems. They are not recommended for
petroleum service.
Bolt/Nut Specifications
• ANSI: Carbon steel oval neck bolts and nuts are heattreated and conform to the physical properties of ASTM
A 183 Grade 2 and SAE J429 Grade 5 with a minimum
tensile strength of 110,000 psi (7584 bar).
Carbon Steel heavy hex nuts conform to the physical
properties of ASTM A 183 Grade 2 and SAE J995 Grade
5. Bolts and nuts are zinc-electroplated conforming to
ASTM B 633.
Carbon Steel pivot bolts are heat treated with a minimum
tensile strength of 130,000 psi (8963 bar).
• Metric: Carbon steel oval neck track head bolts (Gold
color coded) are heat treated and conform to the physical
properties of ASTM F 568 M with a minimum tensile strength
of 760 MPa.
Carbon Steel heavy hex nuts conform to the physical
properties of ASTM A 563 M Class 9. Bolts and nuts are
zinc-electroplated conforming to ASTM B 633.
• Stainless steel bolts and nuts are available upon request.
COPPER SYSTEMS
MATERIAL SPECIFICATIONS
&HUWLILHGWR
16)$16,
)RUDGGLWLRQDOOLVWLQJVRUDSSURYDOV
VHHSDJHRUYLVLWRXUZHEVLWHDW
ZZZJULQQHOOFRP
Fitting Specifications
MATERIAL SPECIFICATIONS
Tech Data Sheet: G520
Cast Copper Alloy Fittings
• Copper Alloy Conforming to CDA C89833
• UL Classified in Accordance with ANSI/NSF61 and
Bears the UL Water Quality Mark
Wrot Copper Fittings
• ASTM B 75 C12200; Wall Thickness Per
ASTM B 88 Type L
(For Figure 652 Groove by Copper Fittings Only)
)RUDGGLWLRQDOOLVWLQJVRUDSSURYDOV
VHHSDJHRUYLVLWRXUZHEVLWHDW
ZZZJULQQHOOFRP
Cast fittings in 90° and 45° elbows, tees, caps, concentric reducers, and reducing tees are cast with a copper alloy conforming
to CDA C89833. Cast fittings are stronger and more durable than wrot copper fittings and are less susceptible to damage in
transit or during installation. Reducing fittings are available with Groove x Groove or Groove x Cup End configurations.
Fittings are standard radius, full flow, designed for installation with GRINNELL Copper System Figure 640 Couplings, Figure 672
Couplings, or Figure 61 Flange Adapters.
Fittings are rated at the pressure rating of the Figure 640 Couplings, Figure 672 Couplings, or Figure 61 Flange Adapters being
used.
Refer to back cover for country-specific customer care numbers.
119
COPPER SYSTEMS
Figure 640 Pivot-Bolt Rigid Installation-Ready Coupling
Tech Data Sheet: G512
The GRINNELL Figure 640 Pivot-Bolt Rigid Coupling joins rolled grooved,
hard-drawn copper tubing systems (CTS). It provides a rigid joint by firmly
gripping the entire circumference of the copper tube groove.
GRINNELL Pivot-Bolt Couplings have been tested and proven to install in
less than half the time of other standard grooved couplings. Simply push
the gasket onto the pipe, swing the coupling body over the gasket, and
tighten only one bolt. In comparison with other installation-ready couplings,
the GRINNELL Pivot-Bolt Coupling allows clear visual confirmation that the
gasket is properly seated on the gasket sealing surfaces.
The Figure 640 Pivot-Bolt Rigid Coupling is capable of pressures up to
300 psi (20,7 bar).
Pipe Size
C
COPPER SYSTEMS
B
A
&HUWLILHGWR
16)$16,
)RUDGGLWLRQDOOLVWLQJVRUDSSURYDOV
VHHSDJHRUYLVLWRXUZHEVLWHDW
ZZZJULQQHOOFRP
Dimensions
Nominal
Inches
mm
Copper
Tubing
O.D.
Inches
mm
A
Inches
mm
B
Inches
mm
C
Inches
mm
2
50
21 ⁄ 2
65
3
80
4
100
5
125
6
150
8
200
2.125
54,0
2.625
66,7
3.125
79,4
4.125
104,8
5.125
130,7
6.125
155,6
8.125
206,4
3.34
84,9
3.85
97,8
4.35
110,5
5.48
139,2
6.57
166,9
7.57
192,3
9.57
243,1
5.86
148,8
6.36
161,5
6.86
174,2
7.99
202,9
9.73
247,1
10.73
272,5
12.73
323,3
1.90
48,3
1.90
48,3
1.91
48,5
1.93
49,0
2.00
50,8
2.02
51,3
2.04
51,8
Pivot
Bolt Size
Dia. x Lg.
Coupling
Bolt Size
Dia. x Lg.
1
1
⁄ 2 x 33 ⁄4
–
1
⁄ 2 x 33 ⁄4
–
1
⁄ 2 x 33 ⁄4
–
1
⁄ 2 x 33 ⁄4
–
5
⁄ 8 x 41 ⁄ 2
–
5
⁄ 8 x 41 ⁄ 2
–
5
⁄ 8 x 41 ⁄ 2
–
⁄ 2 x 35 ⁄ 8
–
1
⁄ 2 x 35 ⁄ 8
–
1
⁄ 2 x 35 ⁄ 8
–
1
⁄ 2 x 35 ⁄ 8
–
5
⁄ 8 x 41 ⁄ 2
–
5
⁄ 8 x 41 ⁄ 2
–
5
⁄ 8 x 41 ⁄ 2
–
Approx.
Weight
lbs
kg
3.1
1,4
3.2
1,5
3.6
1,6
4.2
1,9
6.9
3,1
7.5
3,4
8.8
4,0
See page 119 for specifications and pages 191 - 198 for gasket information.
Performance Pressure
Pipe Size
Nominal
Size
Inches
mm
2
120
Type “K”
ASTM B-88
Copper
Wall
Max.
Max.
Tubing O.D.
Thick
Working
End
Inches
Inches Pressure
Load
mm
mm
psi/bar
lbs/kN
2.125
0.083
300
1.065
Type “L”
ASTM B-88
Wall
Max.
Thick Working
Inches Pressure
mm
psi/bar
0.070
300
Max.
End
Load
lbs/kN
1.065
Type “M”
ASTM B-88
Wall
Max.
Max.
Thick Working
End
Inches Pressure Load
mm
psi/bar lbs/kN
0.058
250
890
Wall
Thick
Inches
mm
–
DWV
ASTM B-306
Max.
Working
Pressure
psi/bar
–
Max.
End
Load
lbs/kN
–
50
54,0
2,1
20,7
4,74
1,8
20,7
4,74
1,5
17,2
3,96
–
–
–
21⁄ 2
65
3
80
4
100
5
125
6
150
8
200
2.625
66,7
3.125
79,4
4.125
104,8
5.125
130,7
6.125
155,6
8.125
206,4
0.095
2,4
0.109
2,8
0.134
3,4
0.160
4,1
0.192
4,9
0.271
6,9
300
20,7
300
20,7
300
20,7
300
20,7
300
20,7
300
20,7
1.625
7,23
2.300
10,23
4.005
17,82
6.190
27,55
8.840
39,34
15.550
69,2
0.080
2,0
0.090
2,3
0.110
2,8
0.125
3,2
0.140
3,6
0.200
5,1
300
20,7
300
20,7
300
20,7
300
20,7
300
20,7
300
20,7
1.625
7,23
2.300
10,23
4.005
17,82
6.190
27,55
8.840
39,34
15.550
69,20
0.065
1,7
0.072
1,8
0.095
2,4
0.109
2,8
0.122
3,1
0.170
4,3
250
17,2
250
17,2
250
17,2
200
13,8
200
13,8
200
13,8
1.350
6,01
1.415
6,30
3.340
14,86
4.125
18,36
5.890
26,21
10.370
46,10
–
–
0.045
1,1
0.058
1,5
0.072
1,8
0.083
2,1
0.109
2,8
–
–
100
6,9
100
6,9
100
6,9
100
6,9
100
6,9
–
–
765
3,40
1.335
5,94
2.060
9,17
2.945
13,10
5.180
23,0
www.grinnell.com
COPPER SYSTEMS
Figure 672 Rigid Coupling
Tech Data Sheet: G510
The GRINNELL Figure 672 Rigid Coupling, size range 2" to 8" (50mm 200mm) is capable of pressures up to 300 PSI (20,7 bar) depending on
copper tubing size and type. It provides a rigid joint by firmly gripping
along the circumference of the copper tube grooves. The GRINNELL
Figure 672 Coupling is supplied with a NSF61 approved grade EPDM
EN tri-seal gasket.
GRINNELL Figure 672 Rigid Couplings are a proven dependable method
of joining copper tubing and are an economical alternative to soldering
(sweating) joints and can be used on type K, L, M, DWV copper tube.
Dimensions
Copper
Nominal Tubing
Inches
O.D.
mm
Inches
mm
2
50
21 ⁄ 2
65
3
80
4
100
5
125
6
150
8
200
Max.*
Gap
Inches
mm
A
Inches
mm
B
Inches
mm
C
Inches
mm
0.06
1,5
0.06
1,5
0.06
1,5
0.09
2,3
0.09
2,3
0.09
2,3
0.09
2,3
3.09
78,6
3.59
91,3
4.12
104,7
5.33
135,3
6.48
164,6
7.48
190,0
9.64
244,8
4.65
118,1
5.56
141,2
6.25
158,8
7.75
196,9
9.25
235,0
10.25
260,4
12.75
323,9
1.76
44,7
1.76
44,7
1.76
44,7
1.86
47,2
1.86
47,2
1.86
47,2
1.86
47,2
2.125
54,0
2.625
66,7
3.125
79,4
4.125
104,8
5.125
130,7
6.125
155,6
8.125
206,4
Qty.
Size
Inches
Approx.
Weight
lbs
kg
3
2
2
2
2
2
2
2
⁄ 8 x 21 ⁄4
–
3
⁄ 8 x 21 ⁄4
–
1
⁄2 x 3
–
1
⁄2 x 3
–
5
⁄ 8 x 31 ⁄ 4
–
5
⁄ 8 x 31 ⁄ 4
–
3
⁄4 x 43 ⁄4
–
A
1.7
0,8
1.9
0,9
3.1
1,4
4.3
2,0
6.0
2,7
6.6
3,0
10.2
4,6
&HUWLILHGWR
16)$16,
)RUDGGLWLRQDOOLVWLQJVRUDSSURYDOV
VHHSDJHRUYLVLWRXUZHEVLWHDW
ZZZJULQQHOOFRP
* Maximum available gap between pipe ends, minimum gap = 0.
See page 119 for specifications and pages 191 - 198 for gasket information.
Pipe Size
Nominal
Size
Inches
mm
2
Type “K”
ASTM B-88
Copper
Wall
Max.
Tubing O.D.
Thick Working
Inches
Inches Pressure
mm
mm
psi/bar
2.125
0.083
300
Max.
End
Load
lbs/kN
1.065
Type “L”
ASTM B-88
Wall
Max.
Thick Working
Inches Pressure
mm
psi/bar
0.070
300
C
B
Coupling Bolts
COPPER SYSTEMS
Pipe Size
Performance Pressure
Max.
End
Load
lbs/kN
1.065
Type “M”
ASTM B-88
Wall
Max.
Max.
Thick Working
End
Inches Pressure Load
mm
psi/bar lbs/kN
0.058
250
890
Wall
Thick
Inches
mm
0.042
DWV
ASTM B-306
Max.
Working
Pressure
psi/bar
–
Max.
End
Load
lbs/kN
–
50
54,0
2,1
20,7
4,74
1,8
20,7
4,74
1,5
17,2
3,96
1,1
–
–
21 ⁄ 2
65
3
80
4
100
5
125
6
150
8
200
2.625
66,7
3.125
79,4
4.125
104,8
5.125
130,7
6.125
155,6
8.125
206,4
0.095
2,4
0.109
2,8
0.134
3,4
0.160
4,1
0.192
4,9
0.271
6,9
300
20,7
300
20,7
300
20,7
300
20,7
300
20,7
300
20,7
1.625
7,23
2.300
10,23
4.005
17,82
6.190
27,55
8.840
39,34
15.550
69,2
0.080
2,0
0.090
2,3
0.110
2,8
0.125
3,2
0.140
3,6
0.200
5,1
300
20,7
300
20,7
300
20,7
300
20,7
300
20,7
300
20,7
1.625
7,23
2.300
10,23
4.005
17,82
6.19
27,55
8.840
39,34
15.550
69,20
0.065
1,7
0.072
1,8
0.095
2,4
0.109
2,8
0.122
3,1
0.170
4,3
250
17,2
250
17,2
250
17,2
200
13,8
200
13,8
200
13,8
1.350
6,01
1.415
6,30
3.340
14,86
4.125
18,36
5.890
26,21
10.370
46,10
–
–
0.045
1,1
0.058
1,5
0.072
1,8
0.083
2,1
0.109
2,8
–
–
100
6,9
100
6,9
100
6,9
100
6,9
100
6,9
–
–
765
3,40
1.335
5,94
2.060
9,17
2.945
13,10
5.180
23,0
Refer to back cover for country-specific customer care numbers.
121
COPPER SYSTEMS
Figure 61 Flange Adapter
(ANSI Class 125/150)
Tech Data Sheet: G515
The GRINNELL Figure 61 Flange Adapter is capable of pressures up
to 300 PSI (20,7 bar) depending on copper tubing size and type. It
provides a direct transition from flanged components to a grooved
copper tube system. I.P.S. size flange bolt patterns conform to ANSI
Class 125 and 150. The GRINNELL Figure 61 Flange Adapter is
supplied with NSF 61 approved grade EPDM EN Gasket.
COPPER SYSTEMS
A
C
F
B E D
&HUWLILHGWR
16)$16,
)RUDGGLWLRQDOOLVWLQJVRUDSSURYDOV
VHHSDJHRUYLVLWRXUZHEVLWHDW
ZZZJULQQHOOFRP
Pipe Size
Copper
Nominal
Tubing
Size
O.D.
Inches
Inches
mm
mm
2
2.125
50
54,0
21 ⁄ 2
2.625
65
66,7
3
3.125
80
79,4
4
4.125
100
104,8
5
5.125
125
130,2
6
6.125
150
155,6
Dimensions
Bolts**
A
Inches
mm
B
Inches
mm
C
Inches
mm
D*
Inches
mm
E*
Inches
mm
F
Inches
mm
6.38
162,1
7.00
178,0
7.50
190,5
9.00
228,6
10.00
254,0
11.00
279,4
4.75
120,7
5.50
140,0
6.00
152,4
7.50
190,5
8.50
215,9
9.50
241,3
0.75
19,1
0.88
22,0
0.94
23,9
0.94
23,9
1.00
25,4
1.00
25,4
2.3
58,4
2.79
70,9
3.28
83,3
4.24
107,7
5.24
133,1
6.24
158,5
2.83
71,9
3.33
84,6
3.85
97,8
4.85
123,2
5.84
148,3
6.96
176,8
7.25
184,2
7.88
200,0
8.38
212,9
9.90
251,5
10.88
276,4
11.88
301,8
Qty.
Size
Inches
mm
5
4
4
4
8
8
8
⁄8 x 3
–
5
⁄8 x 3
–
5
⁄8 x 3
–
5
⁄8 x 3
–
3
⁄ 4 x 31 ⁄ 2
–
3
⁄ 4 x 31 ⁄ 2
–
Approx.
Weight
lbs
kg
3.7
1,7
5.4
2,4
6.1
2,8
7.6
3,4
9.5
4,3
10.9
4,9
* Dimensions D and E represent minimum and maximum sealing surfaces.
** Bolts are not supplied. Bolt lengths shown are standard; it is the responsibility of the purchaser to verify correct length for the intended application.
Note: Phenolic Type “F” Flange Adapter Washer (page 33) are required when the Figure 61 Flange Adapter is used against surfaces such as:
- Rubber surfaces
- Adapting to AWWA cast flanges
- Rubber faced wafer valves
- Serrated flange surfaces
Figure 61 Flange Adapters are not recommended for applications that incorporate tie rods for anchoring or on a standard fitting
within 90° of each other.
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 119 for specifications and pages 191 - 198 for gasket information.
122
www.grinnell.com
COPPER SYSTEMS
Figure 610 90° Elbow
Figure 601 45° Elbow
Tech Data Sheet: G520
Tech Data Sheet: G520
COPPER SYSTEMS
C to E
C to E
Pipe Size
Copper Tubing
Nominal Size
O.D.
Inches
Inches
mm
mm
2
2.125
50
54,0
21 ⁄ 2
2.625
65
66,7
3
3.125
80
79,4
4
4.125
100
104,8
5
5.125
125
130,2
6
6.125
150
155,6
8
8.125
200
206,4
C to E
Inches
mm
Approx.
Weight
lbs
kg
2.91
73,9
3.31
84,1
3.81
96,8
4.75
120,7
5.94
150,9
6.94
176,7
7.75
196,9
1.9
0,9
2.7
1,2
3.6
1,6
7.1
3,2
11.9
5,4
16.7
7,6
25.3
11,5
For information on larger sizes, contact GRINNELL Mechanical
Products.
See page 119 for specifications.
Pipe Size
Copper Tubing
Nominal Size
O.D.
Inches
Inches
mm
mm
2
2.125
50
54,0
21 ⁄ 2
2.625
65
66,7
3
3.125
80
79,4
4
4.125
100
104,8
5
5.125
125
130,2
6
6.125
150
155,6
8
8.125
200
206,4
C to E
Inches
mm
Approx.
Weight
lbs
kg
2.19
55,6
2.31
58,7
2.59
65,8
3.19
81,0
3.25
82,6
3.5
88,9
4.25
108,0
1.6
0,7
2.1
1,0
2.7
1,2
5.5
2,5
7.7
3,5
10.1
4,6
16.6
7,5
For information on larger sizes, contact GRINNELL Mechanical
Products.
See page 119 for specifications.
Refer to back cover for country-specific customer care numbers.
123
COPPER SYSTEMS
Figure 619 Tee
Figure 660 Cap
Tech Data Sheet: G520
Tech Data Sheet: G520
COPPER SYSTEMS
C to E
E to E
C to E
Pipe Size
Copper Tubing
Nominal Size
O.D.
Inches
Inches
mm
mm
2
2.125
50
54,0
21 ⁄ 2
2.625
65
66,7
3
3.125
80
79,4
4
4.125
100
104,8
5
5.125
125
130,2
6
6.125
150
155,6
8
8.125
200
206,4
C to E
Inches
mm
Approx.
Weight
lbs
kg
2.69
68,3
3.20
81,3
3.52
89,4
4.25
108,0
5.94
150,9
6.94
176,3
7.75
196,9
2.5
1,1
3.8
1,7
4.7
2,1
9.0
4,1
17.7
8,0
24.8
11,3
46.2
21,0
For information on larger sizes, contact GRINNELL Mechanical
Products.
See page 119 for specifications.
124
Pipe Size
Copper Tubing
Nominal Size
O.D.
Inches
Inches
mm
mm
2
2.125
50
54,0
21 ⁄ 2
2.625
65
66,7
3
3.125
80
79,4
4
4.125
100
104,8
5
5.125
125
130,2
6
6.125
150
155,6
8
8.125
200
206,4
E to E
Inches
mm
Approx.
Weight
lbs
kg
0.92
23,4
0.92
23,4
0.92
23,4
0.92
23,4
0.92
23,4
0.92
23,4
1.03
26,2
0.6
0,3
1.0
0,4
1.3
0,6
2.2
1,0
5.8
2,6
8.1
3,7
14.1
6,4
For information on larger sizes, contact GRINNELL Mechanical
Products.
See page 119 for specifications.
www.grinnell.com
COPPER SYSTEMS
Figure 621 Reducing Tee
Tech Data Sheet: G520
C to RE
Nominal
Size
Inches
mm
21 ⁄ 2 x 21 ⁄ 2 x 2
65 x 65 x 50
3x3x2
80 x 80 x 50
3 x 3 x 21 ⁄ 2
80 x 80 x 65
4x4x2
100 x 100 x 50
4 x 4 x 21 ⁄ 2
100 x 100 x 65
4x4x3
100 x 100 x 80
5x5x3
125 x 125 x 80
5x5x4
125 x 125 x 100
6 x 6 x 21 ⁄ 2
150 x 150 x 65
6x6x3
150 x 150 x 80
6x6x4
150 x 150 x 100
6x6x5
150 x 150 x 125
Pipe Size
Copper Tubing
O.D.
Inches
mm
2.625 x 2.625 x 2.125
66,7 x 66,7 x 54,0
3.125 x 3.125 x 2.125
79,4 x 79,4 x 54,0
3.125 x 3.125 x 2.625
79,4 x 79,4 x 66,7
4.125 x 4.125 x 2.125
104,8 x 104,8 x 54,0
4.125 x 4.125 x 2.625
104,8 x 104,8 x 66,7
4.125 x 4.125 x 3.125
104,8 x 104,8 x 79,4
5.125 x 5.125 x 3.125
130,2 x 130,2 x 79,4
5.125 x 5.125 x 4.125
130,2 x 130,2 x 104,8
6.125 x 6.125 x 2.625
155,6 x 155,6 x 66,7
6.125 x 6.125 x 3.125
155,6 x 155,6 x 79,4
6.125 x 6.125 x 4.125
155,6 x 155,6 x 104,8
6.125 x 6.125 x 5.125
155,6 x 155,6 x 130,2
C to E
Inches
mm
C to RE
Inches
mm
Approx.
Weight
lbs
kg
3.28
83,3
3.00
76,2
3.25
82,6
3.66
93,0
3.94
100,1
4.19
106,4
3.75
95,3
4.25
108,0
3.63
92,2
3.69
93,7
4.19
106,4
4.69
119,1
3.38
85,9
3.38
85,9
3.5
88,9
4.13
104,9
4.06
103,1
4.16
105,7
4.63
117,6
4.56
115,8
5.13
130,3
5.19
131,8
5.13
130,3
5.19
131,8
3.5
1,6
3.8
1,7
4.3
2,0
6.9
3,2
7.5
3,4
8.7
4,0
10.0
4,5
11.4
5,2
11.5
5,2
11.9
5,4
13.7
6,2
15.9
7,2
COPPER SYSTEMS
C to E
For information on larger sizes, contact GRINNELL Mechanical Products.
Dimensional information in this chart is for cast fittings.
See page 119 for specifications.
Refer to back cover for country-specific customer care numbers.
125
COPPER SYSTEMS
Figure 618 Reducing Tee
Tech Data Sheet: G520
C to RE
Cup
C to E
Figure 618
Reducing Tee
Groove x Groove x Cup
COPPER SYSTEMS
Nominal
Size
Inches
mm
2 x 2 x 3 ⁄4
50 x 50 x 20
2x2x1
50 x 50 x 25
2 x 2 x 11 ⁄ 4
50 x 50 x 32
2 x 2 x 11 ⁄ 2
50 x 50 x 40
21 ⁄ 2 x 21 ⁄ 2 x 3 ⁄4
65 x 65 x 20
21 ⁄ 2 x 21 ⁄ 2 x 1
65 x 65 x 25
2 1 ⁄ 2 x 2 1 ⁄ 2 x 11 ⁄ 4
65 x 65 x 32
2 1 ⁄ 2 x 2 1 ⁄ 2 x 11 ⁄ 2
65 x 65 x 40
3 x 3 x 3 ⁄4
80 x 80 x 20
3x3x1
80 x 80 x 25
3 x 3 x 11 ⁄ 4
80 x 80 x 32
3 x 3 x 11 ⁄ 2
80 x 80 x 40
4 x 4 x 3 ⁄4
100 x 100 x 20
4x4x1
100 x 100 x 25
4 x 4 x 11 ⁄ 4
100 x 100 x 32
4 x 4 x 11 ⁄ 2
100 x 100 x 40
Pipe Size
Copper Tubing
O.D.
Inches
mm
2.125 x 2.125 x 0.825
54,0 x 54,0 x 21,0
2.125 x 2.125 x 1.125
54,0 x 54,0 x 25,4
2.125 x 2.125 x 1.375
54,0 x 54,0 x 34,9
2.125 x 2.125 x 1.625
54,0 x 54,0 x 38,1
2.625 x 2.625 x 0.875
66,7 x 66,7 x 21,0
2.625 x 2.625 x 1.125
66,7 x 66,7 x 25,4
2.625 x 2.625 x 1.375
66,7 x 66,7 x 34,9
2.625 x 2.625 x 1.625
66,7 x 66,7 x 38,1
3.125 x 3.125 x 0.875
79,4 x 79,4 x 21,0
3.125 x 3.125 x 1.125
79,4 x 79,4 x 25,4
3.125 x 3.125 x 1.375
79,4 x 79,4 x 34,9
3.125 x 3.125 x 1.625
79,4 x 79,4 x 38,1
4.125 x 4.125 x 0.875
104,8 x 104,8 x 21,0
4.125 x 4.125 x 1.125
104,8 x 104,8 x 25,4
4.125 x 4.125 x 1.375
104,8 x 104,8 x 34,9
4.125 x 4.125 x 1.625
104,8 x 104,8 x 38,1
C to E
Inches
mm
C to RE
Inches
mm
Cup
Inches
mm
Approx.
Weight
lbs
kg
2.20
55,9
2.33
59,1
2.48
63,0
2.55
64,7
2.27
57,7
2.40
61,0
2.52
64,0
2.70
68,6
2.45
62,2
2.54
64,5
2.63
66,8
2.85
72,4
2.95
94,7
3.10
78,7
3.25
82,5
3.35
85,1
2.04
51,8
2.26
57,4
2.41
61,2
2.34
59,4
2.24
57,0
2.46
62,5
2.63
66,8
2.74
69,6
2.64
67,1
2.85
72,4
2.95
74,9
3.06
77,7
3.06
77,7
3.28
83,3
3.53
89,7
3.71
94,2
0.75
19,0
0.91
23,1
0.97
24,6
1.09
27,7
0.75
19,0
0.91
23,1
0.97
24,6
1.09
27,7
0.75
19,0
0.91
23,1
0.97
24,6
1.09
27,7
0.75
19,0
0.91
23,1
0.97
24,6
1.09
27,7
1.6
0,7
1.8
0,8
2.0
0,9
2.0
0,9
2.2
1,0
2.3
1,0
2.5
1,1
2.7
1,2
2.9
1,3
3.0
1,4
3.1
1,4
3.4
1,5
5.2
2,4
5.5
2,5
5.7
2,6
6.1
2,8
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 119 for specifications.
126
www.grinnell.com
COPPER SYSTEMS
Figures 650
Concentric Reducer
Figures 652
Concentric Reducer
Tech Data Sheet: G520
Tech Data Sheet: G520
E to E
E to E
Pipe Size
Nominal
Size
Inches
mm
21 ⁄ 2 x 2
65 x 50
Copper Tubing
O.D.
Inches
mm
2.625 x 2.125
66,7 x 54,0
E to E
Inches
mm
Approx.
Weight
lbs
kg
3.29
83,6
1.4
0,6
3x2
3.125 x 2.125
2.50
1.4
80 x 50
3 x 21 ⁄ 2
80 x 65
4x2
100 x 50
4 x 21 ⁄ 2
100 x 65
4x3
100 x 80
5x3
125 x 80
5x4
125 x 100
6x3
150 x 80
6x4
150 x 100
6x5
79,4 x 54,0
3.125 x 2.625
79,4 x 66,7
4.125 x 2.125
104,8 x 54,0
4.125 x 2.625
104,8 x 66,7
4.125 x 3.125
104,8 x 79,4
5.125 x 3.125
130,2 x 79,4
5.125 x 4.125
130,2 x 104,8
6.125 x 3.125
155,6 x 79,4
6.125 x 4.125
155,6 x 104,8
6.125 x 5.125
63,5
2.50
63,5
4.75
120,7
3.00
76,2
3.00
76,2
3.88
98,6
3.38
85,9
4.38
111,3
3.88
98,6
3.38
0,6
1.4
0,6
3.0
1,4
2.3
1,0
2.3
1,0
3.7
1,7
3.7
1,7
5.1
2,3
5.2
2,4
4.8
150 x 125
155,6 x 130,2
85,9
2,2
8x6
200 x 150
8.125 x 6.125
206,4 x 155,6
5.00
127.0
9.7
4,4
Pipe Size
Nominal
Copper Tubing
Size
O.D.
Inches
Inches
mm
mm
2x1
2.125 x 1.125
50 x 25
54,0 x 25,4
2.125 x 1.375
2 x 11 ⁄ 4
50 x 32
54,0 x 34,9
2 x 11 ⁄ 2
2.125 x 1.625
50 x 40
54,0 x 38,1
21 ⁄ 2 x 1
2.625 x 1.125
65 x 25
66,7 x 25,4
2.625 x 1.375
2 1 ⁄ 2 x 11 ⁄ 4
65 x 32
66,7 x 34,9
2 1 ⁄ 2 x 11 ⁄ 2
2.625 x 1.625
65 x 40
66,7 x 38,1
21 ⁄ 2 x 2
2.625 x 2.125
65 x 50
66,7 x 54,0
3 x 11 ⁄ 2
3.125 x 1.625
80 x 40
79,4 x 38,1
3x2
3.125 x 2.125
80 x 50
79,4 x 54,0
4x2
4.125 x 2.125
100 x 50
104,8 x 54,0
E to E
Inches
mm
Cup
Inches
mm
Approx.
Weight
lbs
kg
2.70
68,6
3.00
76,2
2.94
74,7
3.25
82,6
3.52
89,4
3.45
87,6
3.38
85,9
3.68
93,5
4.10
104,1
4.75
120,7
0.91
23,1
0.97
24,6
1.09
27,7
0.91
23,1
0.97
24,6
1.09
27,7
1.34
34,0
1.09
27,7
1.34
34,0
1.34
34,0
0.5
0,2
0.4
0,2
0.4
0,2
0.5
0,2
0.6
0,3
0.6
0,3
0.6
0,3
0.7
0,3
1.0
0,5
1.4
0,6
COPPER SYSTEMS
Cup
For information on larger sizes, contact GRINNELL Mechanical
Products.
See page 119 for specifications.
For information on larger sizes, contact GRINNELL Mechanical
Products.
See page 119 for specifications.
Refer to back cover for country-specific customer care numbers.
127
COPPER SYSTEMS
Model B680 Butterfly Valve with Lever Handle
Tech Data Sheet: G530
The GRINNELL Model B680 is a lever handle bronze body butterfly
valve designed for use with grooved copper tubing (CTS), fittings and
couplings. The valve is rated to 300 psi (20,7 bar) and features a 10
position locking lever handle and EPDM encapsulated ductile iron disc.
COPPER SYSTEMS
D
MATERIAL SPECIFICATIONS
Body
B
• Cast Bronze to ASTM B 584-87 Copper
Alloy UNS C90500
O.D.
Disc
• Ductile Iron to ASTM A 536 Grade
65-45-12 Encapsulated with EPDM
C
Upper and Lower Shafts
• Stainless Steel Type 416 of
ASTM A 582
• UL Classified in Accordance with
ANSI/NSF 61
A
Pipe Size
Nominal
Size
Inches
mm
2
50
21 ⁄ 2
65
3
Copper
Tubing O.D.
Inches
mm
2.125
54,0
2.625
66,7
3.125
Dimensions
A
Inches
mm
B
Inches
mm
C
Inches
mm
D
Inches
mm
3.19
81,0
3.75
96,0
3.75
5.31
135,0
5.91
150,0
7.68
2.45
57,0
2.63
67,0
3.13
10.0
254,0
10.0
254,0
10.0
Weight
lbs
kg
4.9
2,2
5.9
2,7
6.6
80
79,4
96,0
195,0
79,0
254,0
3,0
4
4.125
4.63
8.78
4.13
10.0
11.0
100
5
125
6
150
104,8
5.125
130,2
6.125
155,6
118,0
5.88
149,0
5.88
149,0
223,0
9.80
249,0
10.86
276,0
105,0
5.13
130,0
6.13
156,0
254,0
10.0
254,0
10.0
254,0
5,0
17.6
8,0
21.6
9,8
For information on larger sizes, contact GRINNELL Mechanical Products.
Notes: Pressure ratings listed are CWP (cold water pressure) or maximum working pressure
within the service temperature range of the gasket used in the coupling.
Maximum working pressures and end loads listed are total of internal and external pressures
and loads based on roll-grooved Type K – ASTM B 88 copper tubing.
See page 119 for specifications.
128
www.grinnell.com
COPPER SYSTEMS
Figures 407GT & 407T Dielectric Waterways
Tech Data Sheet: G465
Clearflow* Fittings protect plumbing systems through an innovative steel-toplastic design that establishes a dielectric waterway. The dielectric fittings
separate dissimilar metals in the electrolyte (waterway), eliminating the local
galvanic cell.
The Clearflow Fittings metal-to-metal joint design maintains external electrical
continuity, thereby preventing stray current corrosion. This feature is critical
when stray current is present due to intentional or non-intentional grounding of
direct current (DC) sources, such as phone systems and appliances.
Figure 407GT
Dielectric Waterway
Fittings meet the requirements of ASTM F 492 for continuous use at
temperatures up to 230°F (110°C).
COPPER SYSTEMS
Test data/results and listings by Pittsburgh Testing Laboratory can be provided
upon request. Contact GRINNELL Mechanical Products
E to E
Pipe Size
Nominal
Inches
mm
1
⁄2
15
3
⁄4
20
1
25
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
3
80
4
100
Figure 407GT
Grooved x Male Thread
Figure 407T
Male Thread x Male Thread
Copper
Tubing O.D.
Inches
mm
End to End
Inches
mm
Approx.
Weight
Lbs.
kg
End to End
Inches
mm
Approx.
Weight
Lbs.
kg
0.625
15,9
0.875
22,2
1.125
28,6
1.375
34,9
1.625
41,3
2.125
54,0
2.625
66,7
3.125
79,4
4.125
104,8
–
–
–
–
4.0
101,6
4.0
101,6
4.0
101,6
4.0
101,6
6.0
152,4
6.0
152,4
6.0
152,4
–
–
–
–
0.3
0,1
0.6
0,3
0.8
0,4
1.0
0,5
1.6
0,7
2.0
0,9
4.5
2,0
3.0
76,2
3.0
76,2
4.0
101,6
4.0
101,6
4.0
101,6
4.0
101,6
6.0
152,4
6.0
152,4
6.0
152,4
0.2
0,1
0.2
0,1
0.3
0,1
0.6
0,3
0.8
0,4
1.0
0,5
1.6
0,7
2.0
0,9
4.5
2,0
For information on larger sizes, contact GRINNELL Mechanical Products.
See fitting specifications on page 37.
Refer to back cover for country-specific customer care numbers.
Figure 407T
Dielectric Waterway
E to E
* Clearflow is a Registered Trademark of Perfection Corp.
129
COPPER SYSTEMS
Figure 407GG Dielectric
Waterway Transition
Fitting
Tech Data Sheet: G465
The GRINNELL Figure 407GG Transition Fitting protects systems through
an innovative steel-to-plastic design that establishes a dielectric waterway.
The transition fitting separates dissimilar metals in the electrolyte
(waterway) eliminating the local galvanic cell.
The GRINNELL Figure 407GG Transition Fitting allows the connection
between steel (IPS) size pipe and copper tube (CTS) size.
COPPER SYSTEMS
Pipe Size
E to E
Nominal
Size
Inches
mm
2
50
21 ⁄ 2
65
3
80
4
100
5
125
6
150
Copper
Tubing O.D.
Inches
mm
2.125
54,0
2.625
66,7
3.125
79,4
4.125
104,8
5.125
130,2
6.125
155,6
Outside Diameter
Inches mm
Steel
(IPS)
Copper
(CTS)
2.375
60,3
2.875
73,0
3.500
88,9
4.500
114,3
5.563
141,3
6.625
168,3
2.125
54,0
2.625
66,7
3.125
79,4
4.125
104,8
5.125
130,2
6.125
155,6
End to End
Inches
mm
Approx.
Weight
lbs
kg
4.00
101,6
4.00
101,6
4.00
101,6
4.00
101,6
4.00
101,6
4.00
101,6
1.3
0,6
3.3
1,5
4.5
2,1
5.8
2,6
7.8
3,5
10.1
4,6
For information on larger sizes, contact GRINNELL Mechanical Products.
See fitting specifications on page 37.
Model 1039-66 Copper Roll Groover
Capacity:
• 2" – 8" (50 - 200mm) Copper Tube K, L, M and DWV
• 11 ⁄ 4" – 6" (32 - 150mm) SCH 40 (7mm)
Model 1039 – 66 Mini-Mite Roll Groover service tool goes from
in-place grooving and can be chucked in a Ridgid Model 300 in
seconds with no gearbox removal.
Model 1039 – 66 Mini-Mite is self contained and can be entirely
operated with its own multi-function crank. No additional tools are required. With ratchet hand crank, roll grooves 11 ⁄ 4" – 6" (32 - 150mm),
Schedule 40 or thin wall steel pipe on the scaffold or anywhere
power is unavailable. All hex drives on Model 1039 – 66 Mini-Mite
are 15/16" (23,8mm).
Mini-Mites require no modifications or parts changes to groove any
pipe or tubing in their size range.
Standard equipment includes a multi-step depth gauge, copper rolls
for 2" – 8" (50 - 200mm). Steel rolls for 11 ⁄ 4" – 6" (32 - 150mm) may
be ordered separately.
See Preparation Equipment section on pages 199 - 212 for more
information and options.
130
www.grinnell.com
131
STAINLESS STEEL SYSTEMS
Stainless Steel Systems Table of Contents
Figure 472
Stainless Steel Rigid Couplings
Page 134
Figure 460
Stainless Steel End Caps
Page 138
Figure 405
Stainless Steel Flexible
Couplings
Page 135
Figure 421
Stainless Steel Reducing Tees
Page 139
STAINLESS STEEL SYSTEMS
Figure 410
Stainless Steel 90° Elbows
Page 136
Figure 401
Stainless Steel 45° Elbows
Page 136
Figure 419
Stainless Steel Tees
Page 137
132
Figure 450
Stainless Steel Concentric Reducers
Page 140
Figure 451
Stainless Steel Eccentric Reducers
Page 141
Figure 441
Stainless Steel Flange
Adapters
Page 142
www.grinnell.com
STAINLESS STEEL SYSTEMS
Coupling Specifications
MATERIAL SPECIFICATIONS
• Type 316L, ASTM A 743/A 743M – Standard
specification for castings, iron-chromium,
iron-chromium-nickel, corrosion resistant;
for general application Grade CR-8M.
• Tensile strength, minimum 70,000 psi (4826,3 bar)
• Yield strength, minimum 30,000 psi (2068,4 bar)
• Elongation in 2" (50mm) minimum 30%
Bolt/Nut Specifications
• Stainless steel bolts are metric track head bolts
conforming to ASTM A 193M Class 2, Type 316
Grade B8M
• Class 2 stainless steel nuts are heavy hex nuts
conforming to ASTM A 194M, Type 316, Grade 8M
• Bolts are coated with an anti-galling agent
Gasket Specifications
• Grade “E” EPDM gaskets have a Green color code
identification and conform to ASTM D 2000 for service
temperatures from -30°F to 230°F (-34°C to 110°C). They
are recommended for hot water not to exceed 230°F
(110°C) plus a variety of dilute acids, oil free air, and
many chemical services. They are not recommended for
petroleum services.
• Grade “EN” EPDM gaskets have a Copper color code
identification and are NSF-61 approved for cold and hot
portable water up to 180°F (82°C).
• Grade “T” Nitrile gaskets have an Orange color code
identification and conform to ASTM D 2000 for service
temperatures from -20°F to 180°F (-29°C to 82°C). They
are recommended for petroleum products, vegetable oils,
mineral oils, and air with oil vapors.
• Grade “O” Fluoroelastomer gaskets have a Blue
color code and conform to ASTM D 2000. They are
recommended for oxidizing acids, petroleum products,
hydraulic fluids, lubricants, and halogenated hydrocarbons.
Fitting Specifications
Tech Data Sheet: G570
MATERIAL SPECIFICATIONS
• Fabricated: 304/316L stainless steel conforming to
ASTM A 312, Schedule 10 and Schedule 40
• Full-flow: 304/316L stainless steel conforming to
ASTM A 403 WPW or A 403 CR
Fittings are available in full-flow and fabricated versions in
304 and 316L S.S. Fabricated fittings are available with
Schedule 10 or Schedule 40 wall thickness.
For pressure ratings of fittings, refer to data sheet G570.
)RUDGGLWLRQDOOLVWLQJVRU
DSSURYDOVVHHSDJHRU
YLVLWRXUZHEVLWHDW
ZZZJULQQHOOFRP
For local country potable water approvals, contact GRINNELL Mechanical Products.
Refer to back cover for country-specific customer care numbers.
133
STAINLESS STEEL SYSTEMS
Stainless Steel Housing Specifications
STAINLESS STEEL SYSTEMS
Figure 472 Stainless Steel Rigid Couplings
Tech Data Sheet: G560
The GRINNELL Figure 472 Rigid Coupling is made of cast 316L stainless
steel and is capable of pressure up to 600 psi (41,4 bar).
The GRINNELL Figure 472 Patented Coupling universal tongueand-groove design allows the housing to grip along the full 360° of
circumference of the pipe. Sizes 11 ⁄ 4" – 4" (32mm – 100mm) have
gripping teeth to prevent rotation during installation.
C
B
A
Pipe Size
Nominal
Inches
mm
1
STAINLESS STEEL SYSTEMS
1 ⁄4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
6
150
8
200 ◗
10
250 ◗
12
300 ◗
O.D.
Inches
mm
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.563
141,3
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
Max.†
Pressures
psi
bar
600
41,4
600
41,4
600
41,4
600
41,4
600
41,4
600
41,4
600
41,4
600
41,4
600
41,4
600
41,4
600
41,4
600
41,4
600
41,4
Max.†
End Load
Lbs.
kN
1,298.5
5,78
1,701.1
7,57
2,658.0
11,82
3,895.0
17,32
4,241.0
18,86
5,772.5
25,68
9,542.3
42,44
14,254.6
63,40
14,583.0
64,87
20,682.4
92,00
35,054.7
155,92
54,455.9
242,22
76,603.5
340,73
Max.*‡
End Gap
Inches
mm
0.06
1,5
0.08
2,0
0.13
3,3
0.13
3,3
0.13
3,3
0.13
3,3
0.19
4,8
0.19
4,8
0.19
4,8
0.19
4,8
0.19
4,8
0.13
3,3
0.13
3,3
Coupling Bolts
Dimensions - Inches mm
A
2.75
69,9
3.00
76,2
3.41
86,6
3.91
99,3
4.19
106,4
4.63
117,6
5.81
147,6
7.02
178,3
7.09
180,1
8.09
205,5
10.56
268,2
12.84
326,1
15.41
391,4
B
4.38
111,3
4.62
117,3
5.12
130,0
5.63
143,0
5.72
145,3
6.25
158,8
7.50
190,5
9.72
246,9
9.71
246,6
10.53
267,5
13.56
344,4
16.41
416,8
18.84
478,5
C
1.81
46,0
1.81
46,0
1.88
47,8
1.88
47,8
2.00
50,8
1.88
47,8
1.97
50,0
2.06
52,3
2.04
51,8
2.13
54,1
2.62
66,5
2.62
66,5
2.62
66,5
Qty.
Size**
Inches
mm
3
2
2
2
2
2
2
2
2
2
2
2
2
2
1
⁄ 8 x 2 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
–
M10 x 57
1
⁄2 x 3
M12 x 89
1
⁄2 x 3
M12 x 89
–
M16 x 83
5
⁄ 8 x 31 ⁄ 4
M16 x 83
5
⁄ 8 x 31 ⁄ 4
M16 x 83
3
⁄4 x 43 ⁄4
M20 x 121
1 x 61 ⁄ 2
M24 x 165
1 x 61 ⁄ 2
M24 x 165
Approx.
Weight
Lbs.
kg
2.0
0,9
2.1
1,0
1.9
0,9
3.2
1,5
3.5
1,6
3.5
1,6
5.6
2,5
8.5
3,9
8.5
3,9
9.4
4,3
19.4
8,8
32.0
14,5
43.0
19,5
Figure 472 Rigid Couplings have an Anti-Rotation Feature of “gripping teeth” along the coupling keys in sizes 11 ⁄ 4" - 4" (32mm - 100mm ),
making the Figure 472 perfectly suited for installations where the likelihood of rotation is greatest.
* Maximum available gap between pipe ends. Minimum gap = 0.
† Maximum Pressure and End Load are total from all loads based on standard weight stainless steel pipe. Pressure ratings and end loads may differ
for other pipe materials and/or wall thickness. Contact GRINNELL Mechanical Products for details.
‡ Max end gap is for cut grooved standard weight stainless steel pipe. Values for roll grooved pipe will be half that of cut grooved.
** Contact GRINNELL Mechanical Products for availability of inch bolt sizes vs. metric bolt sizes.
◗ Sizes are available to JIS standards. Contact GRINNELL Mechanical Products for details.
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 133 for stainless steel coupling specifications and pages 191 - 198 for gasket information.
Refer to pressure ratings for Schedule 5, 10, and 40 pipe on pages 222 - 223, or contact GRINNELL Mechanical Products.
134
www.grinnell.com
STAINLESS STEEL SYSTEMS
Figure 405 Stainless Steel Flexible Couplings
Tech Data Sheet: G565
The GRINNELL Figure 405 Flexible Coupling is made of
316L stainless steel and is capable of pressures up to 750
psi (51,7 bar), depending on pipe size and wall thickness.
B
C
A
Nominal
Inches
mm
O.D.
Inches
mm
Max.†
Pressures
psi
bar
Max.†
End Load
Lbs.
kN
Max.*‡
End Gap
Inches
mm
1
25
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
76,1mm
1.315
33,4
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.000
750
51,7
750
51,7
750
51,7
500
34,5
500
34,5
500
1,018.6
4,53
1,623.1
7,22
2,126.4
9,46
2,215.0
9,85
3,245.8
14,44
3,534.2
0.13
3,3
0.13
3,3
0.13
3,3
0.13
3,3
0.13
3,3
0.13
65 ◗
3
80
4
100
139,7mm
76,1
34,5
15,72
3,3
3.500
88,9
4.500
114,3
5.500
500
34,5
325
22,4
200
4,810.4
21,40
5,168.7
22,99
4,751.5
0.13
3,3
0.25
6,4
0.25
139,7
13,8
21,13
6,4
5.563
141,3
6.625
168,3
8.625
219,1
200
13,8
200
13,8
200
13,8
4,861.0
21,62
6,894.1
30,67
11,684.9
51,97
0.25
6,4
0.25
6,4
0.25
6,4
125 ◗
5
125
6
150
8
200
Deflection ‡
Degrees
per
coupling
5° 26'
4° 19'
3° 46'
3° 1'
2° 29'
2° 23'
2° 3'
3° 11'
2° 36'
2° 35'
2° 10'
1° 40'
In/Ft
mm/m
Dimensions - Inches mm
A
B
C
0.90
95,1
0.90
75,0
0.79
65,8
0.63
52,5
0.52
43,3
0.50
2.20
56,0
2.56
65,0
2.75
69,9
3.25
82,6
3.69
93,7
4.00
3.82
97,0
4.19
106,4
4.44
112,8
4.88
124,0
5.50
139,7
5.75
1.81
46,0
1.81
46,0
1.81
46,0
1.88
47,8
1.88
47,8
1.88
41,7
101,6
146,10
47,8
0.43
35,8
0.67
55,8
0.55
4.38
111,3
5.69
144,5
6.81
6.50
165,1
7.75
196,9
9.75
1.88
47,8
2.06
52,3
2.06
45,5
173,0
247,7
52,3
0.54
45,0
0.45
37,5
0.35
29,2
6.88
174,8
7.94
201,7
10.19
258,8
9.75
247,7
10.69
271,5
13.56
344,4
2.06
52,3
2.06
52,3
2.50
63,5
Coupling Bolts
Qty.
Size**
Inches
mm
3
2
2
2
2
2
2
1
2
2
1.5
0,6
1.5
0,7
1.6
0,7
1.7
0,8
2.0
0,9
3.1
M12 x 89
1,4
⁄2 x 3
M12 x 89
1
⁄2 x 3
M12 x 89
–
3.1
1,4
4.0
1,8
7.2
M16 x 83
3,3
5
2
2
2
kg
⁄ 8 x 2 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
3
⁄ 8 x 21 ⁄4
M10 x 57
–
1
2
Approx.
Weight
Lbs.
⁄ 8 x 31 ⁄ 4
M16 x 83
5
⁄ 8 x 31 ⁄ 4
M16 x 83
3
⁄4 x 43 ⁄4
M20 x 121
STAINLESS STEEL SYSTEMS
Pipe Size
7.1
3,2
7.1
3,2
14.5
6,6
Values for roll grooved pipe will be half that of cut grooved.
* Maximum available gap between pipe ends. Minimum gap = 0.
† Maximum Pressure and end load are total from all loads based on standard weight stainless steel pipe. Pressure ratings and end loads may differ
for other pipe materials and/or wall thickness. Contact GRINNELL Mechanical Products for details.
‡ Max End Gap and Deflection is for cut grooved standard weight stainless steel pipe.
** Contact GRINNELL Mechanical Products for availability of inch bolt sizes vs. metric bolt sizes.
◗ Sizes are available to JIS standards. Contact GRINNELL Mechanical Products for details.
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 133 for stainless steel coupling specifications and pages 191 - 198 for gasket information.
Refer to pressure ratings for Schedule 5, 10, and 40 pipe on pages 222 - 223, or contact GRINNELL Mechanical Products.
Refer to back cover for country-specific customer care numbers.
135
STAINLESS STEEL SYSTEMS
Figure 410 90°
Stainless Steel Elbows
Figure 401 45°
Stainless Steel Elbows
Tech Data Sheet: G570
Tech Data Sheet: G570
C to E
C to E
C to E
C to E
Figure 410A
Full-Flow 90° Elbow
STAINLESS STEEL SYSTEMS
Pipe Size
Nominal
Inches
mm
1
25
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
5
125
6
150
8
200
10
250
12
300
O.D.
Inches
mm
1.315
33,4
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
Figure 410
Fabricated 90° Elbow
C to E
Inches
mm
2.88
73,2
3.13
79,5
3.50
88,9
4.50
114,3
5.00
127,0
5.12
130,0
4.50
114,3
6.00
152,4
7.50
190,5
9.00
228,6
12.00
304,8
15.00
381,0
18.00
457,2
Approx.
Weight
Lbs.
kg
1.0
0,45
1.0
0,45
1.0
0,45
1.1
0,50
1.7
0,77
3.1
1,41
2.6
1,18
4.7
2,13
8.4
3,81
10.3
4,67
17.6
7,98
49.2
22,32
78.4
35,56
For information on larger sizes, contact GRINNELL
Mechanical Products.
Schedule 40 fittings available upon request, contact GRINNELL
Mechanical Products.
See page 133 for stainless steel fitting specifications.
136
Figure 401A
Full-Flow 45° Elbow
Pipe Size
Nominal
Inches
mm
1
25
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
5
125
6
150
8
200
10
250
12
300
O.D.
Inches
mm
1.315
33,4
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
Figure 401
Fabricated 45° Elbow
C to E
Inches
mm
2.00
50,8
2.00
50,8
3.50
88,9
2.75
69,9
2.81
71,4
2.87
73,0
2.00
50,8
2.50
63,5
3.13
79,4
3.75
95,3
5.00
127,0
6.25
158,8
7.50
190,5
Approx.
Weight
Lbs.
kg
0.6
0,27
0.8
0,36
1.0
0,45
1.2
0,54
1.7
0,77
3.1
1,41
1.3
0,59
2.3
1,04
4.2
1,90
5.1
2,31
13.8
6,26
24.6
11,16
39.2
17,78
For information on larger sizes, contact GRINNELL
Mechanical Products.
Schedule 40 fittings available upon request, contact GRINNELL
Mechanical Products.
See page 133 for stainless steel fitting specifications.
www.grinnell.com
STAINLESS STEEL SYSTEMS
Figure 419 Tees
Pipe Size
Nominal
Inches
mm
1
25
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
5
125
6
150
8
200
10
250
12
300
O.D.
Inches
mm
1.315
33,4
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
C to E
Inches
mm
2.88
73,2
3.38
85,9
3.38
85,9
2.75
69,9
3.07
78,0
2.99
76,0
3.77
95,8
4.47
113,5
5.91
150,1
5.91
150,1
7.79
197,9
8.89
225,8
10.39
263,9
STAINLESS STEEL SYSTEMS
Tech Data Sheet: G570
Approx.
Weight
Lbs.
kg
1.0
0,45
1.5
0,68
1.6
0,73
2.3
1,04
2.2
1,00
3.1
1,41
3.1
1,41
4.9
2,22
7.1
3,49
11.7
5,31
20.0
9,07
34.4
15,60
52.5
23,81
C to E
C to E
Figure 419A
Full-Flow Tee
C to E
C to E
Figure 419
Fabricated Tee
For information on larger sizes, contact GRINNELL Mechanical Products.
Schedule 40 fittings available upon request, contact GRINNELL Mechanical
Products.
See page 133 for stainless steel fitting specifications.
Refer to back cover for country-specific customer care numbers.
137
STAINLESS STEEL SYSTEMS
Figure 460 End Caps
Tech Data Sheet: G570
STAINLESS STEEL SYSTEMS
E to E
E to E
Pipe Size
1" - 4"
(25 - 100mm)
5" - 12"
(125 - 300mm)
Figure 460A
Full-Flow End Cap
E to E
E to E
1" - 4"
(25 - 100mm)
5" - 12"
(125 - 300mm)
Figure 460
Fabricated End Cap
Nominal
Inches
mm
O.D.
Inches
mm
Nominal
E to E
Inches
mm
Approx.
Weight
Lbs.
1
25
11 ⁄ 4
32
11 ⁄ 2
40
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
5
125 *
6
150 *
8
200 *
10
250 *
12
300 *
1.315
33,4
1.660
42,4
1.900
48,3
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
1.08
27,5
1.08
27,5
1.08
27,5
1.08
27,5
1.08
27,5
2.36
60,0
1.08
27,5
1.13
28,7
3.00
76,2
3.50
88,9
4.00
101,6
5.00
127,0
6.00
152,4
0.2
0,09
0.4
0,09
0.5
0,09
0.7
0,09
1.0
0,45
3.1
1,41
2.0
0,91
3.1
1,41
1.5
0,68
1.5
0,68
3.1
1,41
6.0
2,72
7.8
3,54
kg
* Dished Cap
For information on larger sizes, contact GRINNELL Mechanical Products.
Schedule 40 fittings available upon request, contact GRINNELL Mechanical Products.
See page 133 for stainless steel fitting specifications.
138
www.grinnell.com
STAINLESS STEEL SYSTEMS
Figure 421 Reducing Tees
Tech Data Sheet: G570
Refer to back cover for country-specific customer care numbers.
C to B
STAINLESS STEEL SYSTEMS
Pipe Size
Approx.
C to E
C to B
Weight
Nominal
O.D.
Inches
Inches
Lbs.
Inches
Inches
mm
mm
kg
mm
mm
11 ⁄ 2 x 11 ⁄ 2 x 1
1.900 x 1.900 x 1.315
3.38
3.38
1.6
40 x 40 x 25
48,3 x 48,3 x 33,4
85,9
85,9
0,73
11 ⁄ 2 x 11 ⁄ 2 x 11 ⁄ 4
1.900 x 1.900 x 1.660
3.38
3.38
1.6
40 x 40 x 32
48,3 x 48,3 x 42,4
85,9
85,9
0,73
2x2x1
2.375 x 2.375 x 1.315
3.25
3.38
2.2
50 x 50 x 25
60,3 x 60,3 x 33,4
82,6
69,9
1,00
2 x 2 x 11 ⁄ 4
2.375 x 2.375 x 1.660
3.25
3.25
2.4
50 x 50 x 32
60,3 x 60,3 x 42,4
82,6
82,6
1,09
2.375 x 2.375 x 1.900
2.75
2.75
2.4
2 x 2 x 11 ⁄ 2
50 x 50 x 40
60,3 x 60,3 x 48,3
69,9
69,9
1,09
21 ⁄ 2 x 21 ⁄ 2 x 1
2.375 x 2.375 x 1.315
3.75
3.75
3.1
50 x 50 x 40
60,3 x 60,3 x 33,4
95,3
95,3
1,41
2.375 x 2.375 x 1.900
3.75
3.75
3.4
2 1 ⁄ 2 x 2 1 ⁄ 2 x 11 ⁄ 2
50 x 50 x 40
60,3 x 60,3 x 48,3
95,3
95,3
1,54
2.375 x 2.375 x 2.375
3.07
3.07
3.6
21 ⁄ 2 x 21 ⁄ 2 x 2
50 x 50 x 40
60,3 x 60,3 x 60,3
78,0
78,0
1,63
3x3x1
3.500 x 3.500 x 1.315
4.25
4.25
4.3
80 x 80 x 25
88,9 x 88,9 x 33,4
108,0
108,0
1,95
3 x 3 x 11 ⁄ 4
3.500 x 3.500 x 1.660
4.25
4.25
4.3
80 x 80 x 32
88,9 x 88,9 x 42,2
108,0
108,0
1,95
3 x 3 x 11 ⁄ 2
3.500 x 3.500 x 1.900
4.25
4.25
4.4
80 x 80 x 40
88,9 x 88,9 x 48,3
108,0
108,0
2,00
3x3x2
3.500 x 3.500 x 2.375
3.77
3.23
4.4
80 x 80 x 50
88,9 x 88,9 x 60,3
95,8
82,0
2,00
3.500 x 3.500 x 2.875
3.77
3.23
4.4
3 x 3 x 21 ⁄ 2
80 x 80 x 65
88,9 x 88,9 x 73,0
95,8
82,0
2,00
4x4x2
4.500 x 4.500 x 2.375
4.47
3.82
4.4
100 x 100 x 50
114,3 x 114,3 x 60,3
113,5
97,0
2,00
4 x 4 x 21 ⁄ 2
4.500 x 4.500 x 2.875
5.00
5.00
4.4
100 x 100 x 65
114,3 x 114,3 x 73,0
113,5
113,5
2,00
4x4x3
4.500 x 4.500 x 3.500
4.47
3.38
4.9
100 x 100 x 80
114,3 x 114,3 x 88,9
113,5
69,9
2,22
6 x 6 x 11 ⁄ 2
6.625 x 6.625 x 1.900
5.91
5.91
9.3
150 x 150 x 40
168,3 x 168,3 x 48,3
150,1
150,1
4,22
6x6x2
6.625 x 6.625 x 2.375
5.91
5.91
9.3
150 x 150 x 50
168,3 x 168,3 x 88,9
150,1
150,1
4,22
6x6x3
6.625 x 6.625 x 3.500
5.91
4.88
9.3
150 x 150 x 80
168,3 x 168,3 x 60,3
150,1
124,0
4,22
6x6x4
6.625 x 6.625 x 4.500
5.91
5.12
9.3
150 x 150 x 100
168,3 x 168,3 x 114,3
150,1
130,0
4,22
8x8x4
8.625 x 8.625 x 4.500
7.79
6.31
18.1
200 x 200 x 100
219,1 x 219,1 x 114,1
197,9
160,3
8,21
8x8x6
8.625 x 8.625 x 6.625
7.79
6.62
18.1
200 x 200 x 150
219,1 x 219,1 x 168,3
197,9
168,1
8,21
10 x 10 x 6
10.750 x 10.750 x 6.625
8.89
7.70
29.3
250 x 250 x 150
273,0 x 273,0 x 168,3
225,8
195,6
13,29
10 x 10 x 8
10.750 x 10.750 x 8.625
8.89
8.59
31.7
250 x 250 x 200
273,0 x 273,0 x 219,1
225,8
218,2
14,38
12 x 12 x 8
12.750 x 12.750 x 8.625
10.39
9.51
44.0
300 x 300 x 200
323,9 x 323,9 x 219,1
263,9
242,0
19,96
12 x 12 x 10
12.750 x 12.750 x 10.750
10.39
9.89
44.0
300 x 300 x 250
323,9 x 323,9 x 273,0
263,9
251,2
19,96
For information on larger sizes, contact GRINNELL Mechanical Products.
Schedule 40 fittings available upon request, contact GRINNELL Mechanical Products.
See page 133 for stainless steel fitting specifications.
C to E
Figure 421A
Full-Flow Reducing Tee
C to B
C to E
Figure 450
Fabricated Reducing Tee
139
STAINLESS STEEL SYSTEMS
Figure 450 Concentric Reducers
STAINLESS STEEL SYSTEMS
Tech Data Sheet: G570
E to E
Figure 450A
Full-Flow Concentric Reducer
E to E
Figure 450
Fabricated Concentric Reducer
140
Pipe Size
Approx.
E to E
Weight
Nominal
O.D.
Inches mm
Lbs. kg
Inches mm
Inches mm
11 ⁄ 2 x 1
1.900 x 1.315
3.75
1.4
40 x 25
48,3 x 33,7
95,3
0,64
11 ⁄ 2 x 11 ⁄ 4
1.900 x 1.660
3.75
1.4
40 x 32
48,3 x 42,4
95,3
0,64
2x1
2.375 x 1.315
3.75
1.5
50 x 25
60,3 x 33,7
95,3
0,68
2 x 11 ⁄ 4
2.375 x 1.660
3.75
2.5
50 x 32
60,3 x 42,4
95,3
1,13
2 x 11 ⁄ 2
2.375 x 1.900
5.00
2.5
50 x 40
60,3 x 48,3
127,0
1,13
2 1 ⁄ 2 x 11 ⁄ 2
2.875 x 1.900
5.00
3.5
65 x 40
73,0 x 48,3
127,0
1,59
21 ⁄ 2 x 2
2.875 x 2.375
5.00
3.5
65 x 50
73,0 x 60,3
127,0
1,59
3x1
3.500 x 1.315
5.00
4.0
80 x 25
88,9 x 33,7
127,0
1,81
3 x 11 ⁄ 4
3.500 x 1.660
5.00
4.3
80 x 32
88,9 x 42,4
127,0
1,95
3 x 11 ⁄ 2
3.500 x 1.900
5.00
4.4
80 x 40
88,9 x 48,3
127,0
2,00
3x2
3.500 x 2.375
5.00
4.8
80 x 50
88,9 x 60,3
127,0
2,17
3.500 x 2.875
5.00
4.8
3 x 21 ⁄ 2
80 x 65
88,9 x 73,0
127,0
2,17
4x2
4.500 x 2.375
5.00
4.8
100 x 50
114,3 x 60,3
127,0
2,17
4 x 21 ⁄ 2
4.500 x 2.875
5.00
4.8
100 x 65
114,3 x 73,0
127,0
2,17
4x3
4.500 x 3.500
5.00
5.0
100 x 80
114,3 x 88,9
127,0
2,27
5x3
5.563 x 3.500
9.00
7.0
125 x 80
141,3 x 88,9
228,6
3,18
5x4
5.563 x 4.500
9.00
7.0
125 x 100
141,3 x 114,3
228,6
3,18
6x2
6.625 x 2.375
9.00
7.0
150 x 50
168,3 x 60,3
228,6
3,18
6 x 21 ⁄ 2
6.625 x 2.875
15.00
7.0
150 x 65
168,3 x 73,0
381,0
3,18
6x3
6.625 x 3.500
5.50
6.9
150 x 80
168,3 x 88,9
139,7
3,13
6x4
6.625 x 4.500
5.50
7.0
150 x 100
168,3 x 114,3
139,7
3,18
8x4
8.625 x 4.500
6.00
9.6
200 x 100
219,1 x 114,3
152,4
4,35
8x6
8.625 x 6.625
6.00
9.6
200 x 150
219,1 x 168,3
152,4
4,35
10 x 4
10.750 x 4.500
10.00
12.4
250 x 100
273,0 x 114,3
254,0
5,62
10 x 6
10.750 x 6.625
7.00
12.4
250 x 150
273,0 x 168,3
177,8
5,62
10 x 8
10.750 x 8.625
7.00
14.9
250 x 200
273,0 x 219,1
177,8
6,76
12 x 6
12.750 x 6.625
14.00
22.0
300 x 150
323,9 x 168,3
355,6
9,98
12 x 8
12.750 x 8.625
14.00
22.0
300 x 200
323,9 x 219,1
355,6
9,98
12 x 10
12.750 x 10.750
14.00
26.0
300 x 250
323,9 x 273,0
355,6
11,79
For information on larger sizes, contact GRINNELL Mechanical Products.
Schedule 40 fittings available upon request, contact GRINNELL Mechanical Products.
See page 133 for stainless steel fitting specifications.
www.grinnell.com
STAINLESS STEEL SYSTEMS
Figure 451 Eccentric Reducers
Pipe Size
Approx.
E to E
Weight
Nominal
O.D.
Inches mm
Lbs. kg
Inches mm
Inches mm
1.900 x 1.315
3.75
1.4
11 ⁄ 2 x 1
40 x 25
48,3 x 33,7
95,3
0,64
11 ⁄ 2 x 11 ⁄ 4
1.900 x 1.660
3.75
1.4
40 x 32
48,3 x 42,4
95,3
0,64
2x1
2.375 x 1.315
3.75
1.5
50 x 25
60,3 x 33,7
95,3
0,68
2.375 x 1.660
3.75
2.5
2 x 11 ⁄ 4
50 x 32
60,3 x 42,4
95,3
1,13
2 x 11 ⁄ 2
2.375 x 1.900
5.00
2.5
50 x 40
60,3 x 48,3
127,0
1,13
21 ⁄ 2 x 2
2.875 x 2.375
5.00
3.5
65 x 50
73,0 x 60,3
127,0
1,59
3x1
3.500 x 1.315
5.00
4.3
80 x 25
88,9 x 33,4
127,0
1,95
3x2
3.500 x 2.375
5.00
4.3
80 x 50
88,9 x 60,3
127,0
1,95
3.500 x 2.875
5.00
4.5
3 x 21 ⁄ 2
80 x 65
88,9 x 73,0
127,0
1,95
4x2
4.500 x 2.375
5.00
4.8
100 x 50
114,3 x 60,3
127,0
2,18
4 x 21 ⁄ 2
4.500 x 2.875
5.00
5.8
100 x 65
114,3 x 73,0
127,0
2,63
4x3
4.500 x 3.500
5.00
5.9
100 x 80
114,3 x 88,9
127,0
2,68
5x3
5.563 x 3.500
9.00
5.9
125 x 80
141,3 x 88,9
228,6
2,68
5x4
5.563 x 4.500
9.00
7.0
125 x 100
141,3 x 114,3
228,6
3,18
6x2
6.625 x 2.375
9.00
7.0
150 x 50
168,3 x 60,3
228,6
3,17
6.625 x 2.875
9.00
7.0
6 x 21 ⁄ 2
150 x 65
168,3 x 73,0
228,6
3,17
6x3
6.625 x 3.500s
9.00
7.0
150 x 80
168,3 x 88,9
228,6
3,18
6x4
6.625 x 4.500
5.00
7.0
150 x 100
168,3 x 114,3
127,0
3,18
8x3
8.625 x 3.500
10.00
9.3
200 x 80
219,1 x 88,9
254,0
4,22
8x4
8.625 x 4.500
12.00
9.3
200 x 100
219,1 x 114,3
304,8
4,22
8x6
8.625 x 6.625
8.00
7.0
200 x 150
219,1 x 168,3
203,2
3,18
10 x 6
10.750 x 6.625
13.00
12.4
250 x 150
273,0 x 168,3
330,2
5,62
10 x 8
10.750 x 8.625
13.00
11.5
250 x 200
273,0 x 219,1
330,2
5,22
12 x 6
12.750 x 6.625
14.00
21.1
300 x 150
323,9 x 168,3
355,6
9,57
12 x 8
12.750 x 8.625
14.00
21.1
300 x 200
323,9 x 219,1
355,6
9,57
12 x 10
12.750 x 10.750
14.00
21.1
300 x 250
323,9 x 273,0
355,6
9,57
For information on larger sizes, contact GRINNELL Mechanical Products.
Schedule 40 fittings available upon request, contact GRINNELL Mechanical Products.
See page 133 for stainless steel fitting specifications.
Refer to back cover for country-specific customer care numbers.
STAINLESS STEEL SYSTEMS
Tech Data Sheet: G570
E to E
Figure 451A
Full-Flow Eccentric Reducer
E to E
Figure 451
Fabricated Eccentric Reducer
141
STAINLESS STEEL SYSTEMS
Figure 441 Flange Adapters
(ANSI Class 150#)
Tech Data Sheet: G568
STAINLESS STEEL SYSTEMS
E to E
Figure 441
Fabricated Flange Adapter
E to E
Figure 441A
Full-Flow Flange Adapter
142
Pipe Size
Nominal
Inches
mm
2
50
21 ⁄ 2
65
3
80
4
100
5
125
6
150
8
200
O.D.
Inches
mm
2.375
60,3
2.875
73,0
3.500
88,9
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
E to E
Inches
mm
4.00
101,6
4.00
101,6
4.00
101,6
6.00
152,4
6.00
152,4
6.00
152,4
6.00
152,4
Mating Flange
Bolt
Qty.
4
4
4
8
8
8
8
Approx. Weight
Lbs.
kg
6.4
2,8
8.8
4,0
10.4
4,7
18.2
8,3
22.0
10,0
28.1
12,7
43.7
19,8
For information on larger sizes or PN16 sizes, contact GRINNELL Mechanical Products.
Schedule 40 fittings available upon request, contact GRINNELL Mechanical Products.
See page 133 for stainless steel fitting specifications.
www.grinnell.com
143
PLAIN END SYSTEMS
Plain End Systems Table of Contents
Figure 909
Plain End Couplings
Page 146
Figure 910
Plain End 90° Elbows
Page 147
Figure 927
Plain End Crosses
Page 150
Figure 960
Plain End Caps
Page 150
Figure 924
Plain End True Wyes
Page 151
Figure 901
Plain End 45° Elbows
Page 147
PLAIN END SYSTEMS
Figure 914
Plain End Laterals
Page 151
Figure 910LR
Plain End Long Radius
90° Elbows
Page 148
Figure 999
Plain End Swaged Nipples
Page 152
Figure 901LR
Plain End Long Radius
45° Elbows
Page 148
Figure 919
Plain End Tees
Page 149
Figure 921
Plain End Reducing Tees
Page 149
144
Figures 991, 992 & 993
Plain End Adapter Nipples
Page 153
Figure 941 & 942
Plain End Flange Adapters
Page 154
www.grinnell.com
PLAIN END SYSTEMS
The GRINNELL Plain End Piping System is designed for use in both maintenance and new system applications and
eliminates the need for pipe end preparation. The GRINNELL Figure 909 Plain End Coupling features case-hardened gripping
teeth that securely grip onto the pipe surface. The coupling is designed for schedule 40 steel pipe and is not for use with steel
pipe with a Brinell hardness greater than 150 HB, nor is it switchable for plastic pipe, cast, or ductile iron pipe.
Contact GRINNELL Mechanical Products about other materials and pipe schedules. Follow bolt torque ratings to ensure a
properly assembled coupling.
Coupling Specifications
Tech Data Sheet: G190
MATERIAL SPECIFICATIONS
• ASTM A 536 – Standard specification for ductile iron
castings, Grade 65-45-12
• Tensile strength, minimum 65,000 psi (4481,6 bar)
• Yield strength, minimum 45,000 psi (3102,6 bar)
• Elongation in 2" (50mm), minimum 12%
• ASTM A 153 – Standard specification for hot-dipped
galvanizing
Coatings
• Orange – Non-lead paint (standard)
• Red – Non-lead paint (optional, regional)
• Hot-Dipped, Zinc galvanized (optional)
Bolt/Nut Specifications
• ANSI: Carbon steel oval neck bolts and nuts are heattreated and conform to the physical properties of ASTM
A 183 Grade 2 and SAE J429 Grade 5 with a minimum
tensile strength of 110,000 psi (7584.2 bar).
Carbon Steel heavy hex nuts conform to the physical
properties of ASTM A 183 Grade 2 and SAE J995
Grade 5. Bolts and nuts are zinc-electroplated
conforming to ASTM B 633.
• Metric: Carbon steel oval neck track head bolts (Gold
color coded) are heat treated and conform to the physical
properties of ASTM F 568 M with a minimum tensile
strength of 760 MPa.
Carbon Steel heavy hex nuts conform to the physical
properties of ASTM A 563 M Class 9. Bolts and nuts are
zinc-electroplated conforming to ASTM B 633.
• Stainless steel bolts and nuts are available upon request.
Gasket Specifications
• Grade “E” EPDM gaskets have a Green color code
identification and conform to ASTM D 2000 for service
temperatures from -30°F to 230°F (-34°C to 110°C). They
are recommended for hot water not to exceed 230°F
(110°C), plus a variety of dilute acids, oil free air, and
many chemical services. They are not recommended for
petroleum services. For low temperature and vacuum
systems, a Tri-Seal Grade “E” EPDM gasket with rigid
coupling is recommended.
PLAIN END SYSTEMS
Coupling Ductile Iron Housing
Specifications
• Grade “T” Nitrile gaskets have an Orange color code
identification and conform to ASTM D 2000 for service
temperatures from -20°F to 180°F (-29°C to 82°C). They
are recommended for petroleum products, vegetable oils,
mineral oils, and air with oil vapors.
Fitting Specifications
Tech Data Sheet: G192
Fitting Specifications
• Carbon steel: according to ASTM A 53, Grade B
• Tensile strength, minimum 60,000 psi (4136,9 bar)
• Yield strength, minimum 35,000 psi (2413,2 bar)
• Sizes 11 ⁄ 4" – 10" (32mm – 250mm) – Schedule 40
Plain end fittings are manufactured to provide minimum
pressure drop and uniform flow. Fittings are designed for use
with the Figure 909 Plain End Couplings only.
Plain end fittings are available in a variety of styles.
Fitting dimensions may vary, contact GRINNELL Mechanical
Products.
• Sizes 12" – 24" (300mm – 600mm) – Std. Wall (0.375)
Coatings
• Orange – Non-lead paint (standard)
• Red – Non-lead paint (optional, regional)
• Hot-Dipped, Zinc galvanized (optional)
Refer to back cover for country-specific customer care numbers.
145
PLAIN END SYSTEMS
Figure 909 Plain End Couplings
Tech Data Sheet: G190
The GRINNELL Figure 909 Plain End Coupling utilizes
hardened gripping teeth to securely grip onto plain and
beveled end pipe surfaces. It is capable of pressures up
to 750 psi (51,7 bar) depending on pipe size and wall
thickness.
The GRINNELL Figure 909 Plain End Coupling is designed
for Schedule 40 steel pipe and is not for use with steel
pipe with a Brinnell hardness greater than 150 HB, plastic,
cast, or ductile iron pipes. Contact GRINNELL Mechanical
Products for recommendations on other materials and pipe
schedules.
B
A
PLAIN END SYSTEMS
C
C
B
A
2" - 6" (50mm - 150mm) (2 Bolts)
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
2
2.375
50
60,3
21 ⁄ 2
2.875
65
73,0
3
3.500
80
88,9
4
4.500
100
114,3
6
6.625
150
168,3
8
8.625
200
219,1
10
10.750
250
273,0
Max.†
Pressures
psi
bar
Max.†
End Load
Lbs.
kN
750
51,7
600
41,4
600
41,4
450
31
300
20,7
250
17,2
250
17,2
3322.6
14,78
3895.1
17,33
5772.7
25,68
7,156.9
31,83
10,341.5
46,00
14,606.6
64,97
22,690.6
100,93
8" - 10" (200mm - 250mm) (4 Bolts)
Dimensions - Inches mm
A
B
C
3.69
93,7
4.17
105,9
4.81
122,2
5.93
150,6
8.19
208,0
10.69
271,5
13.13
333,5
5.75
146,1
6.25
158,8
7.56
192,0
8.63
219,2
11.68
296,7
13.63
346,2
15.88
403,4
3.31
84,1
3.31
84,1
3.31
84,1
3.88
98,6
4.25
108,0
4.91
124,7
4.91
124,7
Qty.
2
2
2
2
2
4
4
Coupling Bolts
Size
Bolt Torque
Inches
Lbs.-ft
mm
Nm
5
⁄ 8 x 31 ⁄ 2
150
M16 x 90
203,0
5
⁄ 8 x 31 ⁄ 2
150
M16 x 90
203,0
3
⁄4 x 43 ⁄4
200
M20 x 121
271,0
3
⁄4 x 43 ⁄4
200
M20 x 121
271,0
250
1 x 61 ⁄ 2
M24 x 165
339,0
7
⁄ 8 x 51 ⁄ 2
250
M22 x 140
339,0
7
⁄ 8 x 51 ⁄ 2
300
M22 x 140
407,0
Approx.
Weight
Lbs.
kg
5.4
2,4
5.9
2,7
9.0
4,1
13.5
6,1
23.5
10,7
35.1
15,9
48.5
22,0
† Maximum Pressure and End Load are total from all loads based on standard weight steel pipe.
Pressure ratings and end loads may differ for other pipe materials and/or wall thickness. Contact GRINNELL Mechanical Products for details.
For information on additional sizes or larger sizes, contact GRINNELL Mechanical Products.
See page 145 for plain end coupling specifications and pages 191 - 198 for gasket information.
146
www.grinnell.com
PLAIN END SYSTEMS
Figure 910 90°
Plain End Elbows
Figure 901 45°
Plain End Elbows
Tech Data Sheet: G192
Tech Data Sheet: G192
C to E
Nominal
Inches
mm
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
8
200
10
250
12
300
O.D.
Inches
mm
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.563
141,3
6.500
165,1
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
C to E
Inches
mm
Approx.
Weight
Lbs.
kg
4.75
120,7
5.50
139,7
5.50
139,7
6.25
158,8
7.75
196,9
9.75
248,0
9.75
248,0
10.00
254,0
10.00
254,0
11.00
279,4
11.50
292,1
13.50
342,9
1.8
0,8
3.1
1,4
3.2
1,5
4.8
2,2
7.5
3,4
11.3
5,1
11.6
5,3
16.9
7,7
16.6
7,5
29.6
13,4
48.5
22,0
66.4
30,1
For information on larger sizes, contact GRINNELL
Mechanical Products.
See page 145 for plain end fitting specifications.
Pipe Size
Nominal
Inches
mm
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
8
200
O.D.
Inches
mm
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.563
141,3
6.500
165,1
6.625
168,3
8.625
219,1
C to E
Inches
mm
Approx.
Weight
Lbs.
kg
3.13
79,5
3.50
88,9
3.50
88,9
3.75
95,3
4.25
108,0
5.00
127,0
5.00
127,0
5.75
146,1
5.75
146,1
6.00
152,4
1.3
0,6
2.1
1,0
2.2
1,0
3.5
1,6
5.5
2,5
7.7
3,5
8.1
3,7
11.0
5,0
11.2
5,1
19.0
8,6
10
10.750
6.50
28.0
250
12
300
273,0
12.750
323,9
165,1
7.00
177,8
12,7
48.0
22,0
PLAIN END SYSTEMS
Pipe Size
C to E
For information on larger sizes, contact GRINNELL
Mechanical Products.
See page 145 for plain end fitting specifications.
Refer to back cover for country-specific customer care numbers.
147
PLAIN END SYSTEMS
Figure 910LR 90° Plain End
Long Radius Elbows
Figure 901LR 45° Plain End
Long Radius Elbows
Tech Data Sheet: G192
Tech Data Sheet: G192
C to E
PLAIN END SYSTEMS
Pipe Size
Nominal
Inches
mm
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
8
200
10
250
12
300
O.D.
Inches
mm
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.563
141,3
6.500
165,1
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
C to E
Inches
mm
Approx.
Weight
Lbs.
kg
4.25
108,0
5.50
139,7
5.50
139,7
6.25
158,8
8.00
203,3
9.75
248,0
9.75
248,0
11.13
282,7
11.13
282,7
14.13
358,9
17.13
435,1
20.13
511,3
2.7
1,2
4.2
1,9
4.4
2,0
6.5
2,9
11.5
5,2
19.0
8,6
19.4
8,8
26.4
12,0
27.9
12,6
54.5
24,7
103.7
47,0
147.8
67,0
For information on larger sizes, contact GRINNELL
Mechanical Products.
See page 145 for plain end fitting specifications.
148
C to E
Pipe Size
Nominal
Inches
mm
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
8
200
10
250
12
300
O.D.
Inches
mm
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.563
141,3
6.500
165,1
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
C to E
Inches
mm
Approx.
Weight
Lbs.
kg
3.13
79,5
3.50
88,9
3.50
88,9
3.75
95,3
4.50
114,3
5.00
127,0
5.00
127,0
5.88
149,4
5.88
149,4
7.13
181,1
8.38
212,9
9.36
244,6
1.8
0,8
2.9
1,3
3.1
1,4
4.6
2,1
7.5
3,4
12.5
5,7
12.5
5,7
12.0
5,4
12.0
5,4
34.0
15,4
56.0
25,4
98.0
44,5
For information on larger sizes, contact GRINNELL
Mechanical Products.
See page 145 for plain end fitting specifications.
www.grinnell.com
PLAIN END SYSTEMS
Figure 919
Plain End Tees
Figure 921
Plain End Reducing Tees
Tech Data Sheet: G192
Tech Data Sheet: G192
Pipe Size
C to E
Pipe Size
Nominal
Inches
mm
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
139,7mm
125
5
125
165,1mm
150
6
150
8
200
10
250
12
300
O.D.
Inches
mm
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.500
139,7
5.563
141,3
6.500
165,1
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
C to E
Inches
mm
Approx.
Weight
Lbs.
kg
3.25
82,6
3.75
95,3
3.75
95,3
4.25
108,0
5.00
127,0
5.50
139,7
5.50
139,7
6.50
165,1
6.50
165,1
10.00
254,0
11.50
292,1
13.50
342,9
2.7
1,2
4.4
2,0
6.5
2,9
6.5
2,9
10.7
4,8
15.2
6,9
15.5
7,0
24.2
11,0
23.0
10,4
43.7
19,8
57.0
25,9
110.0
49,9
For information on larger sizes, contact GRINNELL
Mechanical Products.
See page 145 for plain end fitting specifications.
Nominal
Inches
mm
3x3x2
80 x 80 x 50
4x4x2
100 x 100 x 50
4 x 4 x 21 ⁄ 2
100 x 100 x 65
4x4x3
100 x 100 x 80
6x6x2
150 x 150 x 50
6x6x3
150 x 150 x 80
6x6x4
150 x 150 x 100
8x8x2
200 x 200 x 50
8x8x3
200 x 200 x 80
8x8x4
200 x 200 x 100
8x8x5
200 x 200 x 125
8x8x6
200 x 200 x 150
10 x 10 x 4
250 x 250 x 100
10 x 10 x 6
250 x 250 x 150
10 x 10 x 8
250 x 250 x 200
12 x 12 x 6
250 x 250 x 100
12 x 12 x 8
250 x 250 x 150
12 x 12 x 10
250 x 250 x 200
O.D.
Inches
mm
3.500 x 3.500 x 2.375
88,9 x 88,9 x 60,3
4.500 x 4.500 x 2.375
114,3 x 114,3 x 60,3
4.500 x 4.500 x 2.875
114,3 x 114,3 x 73,0
4.500 x 4.500 x 3.500
114,3 x 114,3 x 88,9
6.625 x 6.625 x 2.375
168,3 x 168,3 x 60,3
6.625 x 6.625 x 3.500
168,3 x 168,3 x 88,9
6.625 x 6.625 x 4.500
168,3 x 168,3 x 114,3
8.625 x 8.625 x 2.375
219,1 x 219,1 x 60,3
8.625 x 8.625 x 3.500
219,1 x 219,1 x 88,9
8.625 x 8.625 x 4.500
219,1 x 219,1 x 114,1
8.625 x 8.625 x 5.563
219,1 x 219,1 x 141,3
8.625 x 8.625 x 6.625
219,1 x 219,1 x 168,3
10.750 x 10.750 x 4.500
273,0 x 273,0 x 114,3
10.750 x 10.750 x 6.625
273,0 x 273,0 x 168,3
10.750 x 10.750 x 8.625
323,9 x 323,9 x 219,1
12.750 x 12.750 x 6.625
323,9 x 323,9 x 168,3
12.750 x 12.750 x 8.625
323,9 x 323,9 x 219,1
12.750 x 12.750 x 10.750
323,9 x 323,9 x 273,0
C to E
Inches
mm
Approx.
Weight
Lbs.
kg
5.13
130,3
5.88
149,4
5.88
149,4
5.88
149,4
7.63
193,8
7.63
193,8
7.63
193,8
10.00
254,0
10.00
254,0
10.00
254,0
10.00
254,0
10.00
254,0
11.50
292,1
11.50
292,1
11.50
292,1
13.50
342,9
13.50
342,9
13.50
342,9
7.1
3,2
9.1
4,1
9.5
4,3
9.7
4,4
19.4
8,8
21.0
9,5
21.8
9,9
36.2
16,4
36.5
16,6
37.2
16,9
36.8
16,7
37.4
17,0
58.0
26,3
66.0
27,2
62.0
28,1
80.9
36,7
76.3
34,6
77.6
35,2
PLAIN END SYSTEMS
C to E
For information on larger sizes, contact GRINNELL
Mechanical Products.
See page 145 for plain end fitting specifications.
Refer to back cover for country-specific customer care numbers.
149
PLAIN END SYSTEMS
Figure 927
Plain End Crosses
Figure 960
Plain End Caps
Tech Data Sheet: G192
Tech Data Sheet: G192
C to E
PLAIN END SYSTEMS
E to E
Pipe Size
Nominal
Inches
mm
2
50
21 ⁄ 2
65
76,1mm
65
3
80
4
100
5
125
165,1mm
150
6
150
8
200
10
250
12
300
O.D.
Inches
mm
2.375
60,3
2.875
73,0
3.000
76,1
3.500
88,9
4.500
114,3
5.563
141,3
6.500
165,1
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
E to E
Inches
mm
Approx.
Weight
Lbs.
kg
4.25
108,0
4.75
120,7
4.75
120,7
5.13
130,3
5.88
149,4
6.88
175,0
7.63
193,8
7.63
193,8
10.00
254,0
11.50
292,1
13.50
342,9
3.7
1,7
5.8
2,6
6.0
2,7
8.6
3,9
20.7
9,4
18.5
8,4
27.3
12,4
28.6
13,0
48.0
21,7
75.0
34,0
95.8
43,4
Pipe Size
Nominal
Inches
mm
2
50
21 ⁄ 2
65
3
80
4
100
5
125
6
150
8
200
10
250
12
300
O.D.
Inches
mm
2.375
60,3
2.875
73,0
3.500
88,9
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
E to E
Inches
mm
Approx.
Weight
Lbs.
kg
4.00
102,0
5.00
127,0
6.00
152,4
7.00
178,0
8.50
216,0
10.00
254,0
11.00
279,4
13.00
330,2
14.00
355,6
2.3
1,0
3.0
1,4
4.5
2,0
7.5
3,4
12.5
5,7
17.0
7,7
29.0
13,2
24.5
11,1
31.0
14,1
For information on larger sizes, contact GRINNELL
Mechanical Products.
See page 145 for plain end fitting specifications.
For information on larger sizes, contact GRINNELL
Mechanical Products.
See page 145 for plain end fitting specifications.
150
www.grinnell.com
PLAIN END SYSTEMS
Figure 924
Plain End True Wyes
Figure 914
Plain End Laterals
Tech Data Sheet: G192
Tech Data Sheet: G192
C to LE
C to LE
C to LE
C to SE
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
2
2.375
50
60,3
2.875
21 ⁄ 2
65
73,0
3
3.500
80
88,9
4
4.500
100
114,3
5
5.563
125
141,3
6
6.625
150
168,3
8
8.625
200
219,1
10
10.750
250
273,0
12
12.750
300
323,9
C to LE
Inches
mm
C to SE
Inches
mm
Approx.
Weight
Lbs.
kg
4.25
108,0
4.75
120,7
5.13
130,3
5.88
149,4
6.88
175,0
7.63
193,8
10.00
254,0
11.50
292,1
13.50
342,9
2.75
69,9
3.00
76,2
3.25
82,6
3.75
95,3
4.00
101,6
4.50
114,3
6.00
152,4
6.50
165,1
7.00
177,8
2.5
1,1
4.4
2,0
6.4
2,9
10.5
4,8
15.2
6,9
22.9
10,4
41.9
19,0
66.2
30,0
87.7
39,8
For information on larger sizes, contact GRINNELL
Mechanical Products.
See page 145 for plain end fitting specifications.
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
2
2.375
50
60,3
2.875
21 ⁄ 2
65
73,0
3
3.500
80
88,9
4
4.500
100
114,3
5
5.563
125
141,3
6
6.625
150
168,3
8
8.625
200
219,1
10
10.750
250
273,0
12
12.750
300
323,9
C to LE
Inches
mm
C to SE
Inches
mm
Approx.
Weight
Lbs.
kg
7.25
184,2
7.75
197,0
8.75
222,3
10.75
273,1
12.75
324,0
14.00
355,6
18.00
457,2
20.75
527,1
24.50
622,3
2.75
69,9
3.00
76,2
3.25
82,6
3.75
95,3
4.00
101,6
4.50
114,3
6.00
152,4
6.50
165,1
7.00
177,8
4.5
2,0
7.7
3,5
11.0
5,0
18.7
8,5
29.4
13,3
42.2
19,1
70.9
32,2
66.2
30,0
87.7
39,8
PLAIN END SYSTEMS
C to SE
For information on larger sizes, contact GRINNELL
Mechanical Products.
See page 145 for plain end fitting specifications.
Refer to back cover for country-specific customer care numbers.
151
PLAIN END SYSTEMS
Figure 999
Plain End Swaged Nipples
Tech Data Sheet: G192
PLAIN END SYSTEMS
E to E
Pipe Size
Nominal
Inches
mm
21 ⁄ 2 x 2
65 x 50
3x2
80 x 50
3 x 21 ⁄ 2
80 x 65
4x2
100 x 50
4 x 21 ⁄ 2
100 x 65
4x3
100 x 80
5x2
125 x 50
5x3
125 x 80
5x4
125 x 100
6x2
150 x 50
6 x 21 ⁄ 2
150 x 65
6x3
150 x 80
6x4
150 x 100
6x5
150 x 125
O.D.
Inches
mm
2.875 x 2.375
73,0 x 60,3
3.500 x 2.375
88,9 x 60,3
3.500 x 2.875
88,9 x 73,0
4.500 x 2.375
114,3 x 60,3
4.500 x 2.875
114,3 x 73,0
4.500 x 3.500
114,3 x 88,9
5.563 x 2.375
141,3 x 60,3
5.563 x 3.500
141,3 x 88,9
5.563 x 4.500
141,3 x 114,3
6.625 x 2.375
168,3 x 60,3
6.625 x 2.875
168,3 x 73,0
6.625 x 3.500
168,3 x 88,9
6.625 x 4.500
168,3 x 114,3
6.625 x 5.563
168,3 x 141,3
E to E
Inches
mm
Approx.
Weight
Lbs.
kg
7.00
177,8
8.00
203,2
8.00
203,2
9.00
228,6
9.00
228,6
9.00
228,6
11.00
279,4
11.00
279,4
11.00
279,4
12.00
304,8
12.00
304,8
12.00
304,8
12.00
304,8
12.00
304,8
3.5
1,6
5.0
2,3
5.0
2,3
8.0
3,6
8.0
3,6
8.0
3,6
12.0
5,4
12.0
5,4
12.0
5,4
19.0
8,6
19.0
8,6
19.0
8,6
19.0
8,6
19.0
8,6
◆
-
8x3
8.625 x 3.500
13.00
200 x 80
219,1 x 88,9
330,2
8x4
8.625 x 4.500
13.00
200 x 100
219,1 x 114,3
330,2
8x6
8.625 x 6.625
13.00
200 x 150
219,1 x 168,3
330,2
10 x 3
10.750 x 3.500
15.00
250 x 80
273,0 x 88,9
381,0
10 x 4
10.750 x 4.500
15.00
250 x 100
273,0 x 114,3
381,0
10 x 6
10.750 x 6.625
15.00
250 x 150
273,0 x 168,3
381,0
10 x 8
10.750 x 8.625
15.00
250 x 200
273,0 x 219,1
381,0
12 x 6
12.750 x 6.625
16.00
300 x 150
323,9 x 168,3
406,4
12 x 8
12.750 x 8.625
16.00
300 x 200
323,9 x 219,1
406,4
12 x 10
12.750 x 10.750
16.00
300 x 250
323,9 x 273,0
406,4
◆
◆
◆
◆
◆
◆
◆
◆
◆
-
◆ These sizes are available. Contact GRINNELL Mechanical Products for details.
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 145 for plain end fitting specifications.
152
www.grinnell.com
PLAIN END SYSTEMS
Figures 991, 992, 993
Plain End Adapter Nipples
Tech Data Sheet: G192
Figure 991
Fabricated Adapter Nipple
Plain x Male Thread
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
2
2.375
50
60,3
2.875
21 ⁄ 2
65
73,0
3
3.500
80
88,9
4
4.500
100
114,3
5
5.563
125
141,3
6
6.625
150
168,3
8
8.625
200
219,1
E to E
Inches
mm
Approx.
Weight
Lbs.
kg
4.00
101,6
4.00
101,6
4.00
101,6
6.00
154,4
6.00
154,4
6.00
154,4
6.00
154,4
1.2
0,5
1.9
0,9
2.5
1,1
5.4
2,4
7.3
3,3
9.4
4,3
14.2
6,4
PLAIN END SYSTEMS
E to E
Figure 992
Fabricated Adapter Nipple
Plain x Groove
E to E
For information on larger sizes, contact GRINNELL
Mechanical Products.
See page 145 for plain end fitting specifications.
Figure 993
Fabricated Adapter Nipple
Plain x Bevel
E to E
Refer to back cover for country-specific customer care numbers.
153
PLAIN END SYSTEMS
Figure 941 Plain End Flange Adapters (ANSI Class 150#)
Figure 942 Plain End Flange Adapters (ANSI Class 300#)
Tech Data Sheet: G192
Figure 942
Plain End Flange Adapter
ANSI Class 300#
E to E
E to E
PLAIN END SYSTEMS
Figure 941
Plain End Flange Adapter
ANSI Class 150#
Pipe Size
Nominal
Inches
mm
2
50
21 ⁄ 2
65
3
80
4
100
5
125
6
150
8
200
O.D.
Inches
mm
2.375
60,3
2.875
73,0
3.500
88,9
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
E to E
Inches
mm
4.00
101,6
4.00
101,6
4.00
101,6
6.00
152,4
6.00
152,4
6.00
152,4
6.00
152,4
Figure 941
ANSI Class 150#
Mating Flange
Bolt
Qty.
4
4
4
8
8
8
8
Approx. Weight
Lbs.
kg
6.4
2,8
8.8
4,0
10.4
4,7
18.2
8,3
22.0
10,0
28.1
12,7
43.7
19,8
E to E
Inches
mm
4.00
101,6
4.00
101,6
4.00
101,6
6.00
152,4
6.00
152,4
6.00
152,4
6.00
152,4
Figure 942
ANSI Class 300#
Mating Flange
Bolt
Qty.
8
8
8
8
8
12
12
Approx. Weight
Lbs.
kg
8.2
3,7
11.9
5,4
15.5
7,0
28.0
12,7
37.0
16,8
48.0
21,8
79.0
35,8
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 145 for plain end fitting specifications.
154
www.grinnell.com
155
G-PRESS SYSTEMS
Stainless Steel G-PRESS Systems Table of Contents
Figure 407
Straight Couplings
(Press x Press)
Page 159
Figure 408
Slip Couplings
(Press x Press)
Page 159
Figure 468
90° Elbows
(Press x Press)
Page 160
Figure 467
90° Elbows
(Male x Female Press)
Page 160
STAINLESS STEEL G-PRESS SYSTEMS
Figure 471
45° Elbows
(Press x Press)
Page 161
Figure 470
45° Elbows
(Male x Female Press)
Page 161
Figure 442
Equal Tees
(Press x Press x Press)
Page 162
Figure 473
Reducing Tees
(Press x Press x Press)
Page 162
Figure 478
Tee and Reducing Tee Adapters
(Press x Press x Female NPT)
Page 163
156
Figure 474
Reducers
(Female Press x Male Press)
Page 164
Figure 476
Straight Connectors
(Female Press x Male NPT)
Page 164
Figure 479
Straight Connectors
(Female Press x Female NPT)
Page 165
Figure 485
Unions
(Press x Press)
Page 165
Figure 484
End Caps
(Female Press)
Page 166
Figure 466
Van Stone Flange Adapters
(Female Press x Flange)
Page 166
Figure 475
Flange Adapters
(Female Press x Flange)
Page 167
Figure 469
Ball Valves
(Press x Press)
Page 168
www.grinnell.com
G-PRESS SYSTEMS
Specifications
Tech Data Sheet: G550
The GRINNELL G-PRESS Stainless Steel Press-Fitting System
provides a complete line of mechanically joined press fittings
in the 1⁄2" to 2" (15 to 50mm) sizes. This press system is
designed to work with Schedule 5 Stainless Steel IPS pipe
sizes. Press joints can be readily achieved using several
commercially available press tools. Several press by male and
female threaded options are available to connect threaded
components. Conversion to flanged connections can be made
with the Class 125/150 Flange Adapter. Where breaks in
the system may be needed, the Union Coupling can make
connections / disconnections easily.
This system makes it easy to quickly and safely install a wide
range of civil, industrial, and naval systems. The GRINNELL
G-PRESS Stainless Steel System has a highly corrosion resistant
316 Stainless Steel housing and a variety of O-Ring Seal
materials making it suitable for use in numerous installations
such as HVAC, plumbing, and industrial applications.
MATERIAL SPECIFICATIONS
Fitting Housing
O-Ring Specifications
Stainless Steel per ANSI 316/316L with a wall thickness of
0.059" (1,5mm) and the following characteristics:
O-ring style gasket is resistant to hot water, ageing, and
additives commonly used in drinking water.
• Higher surface roughness friction factor resulting in less
flow loss
• Excellent corrosion resistance in chlorinated
environments
For local country potable water approvals, contact GRINNELL
Mechanical Products
Working Pressure
• Pressure range from full vacuum to 300 psi (20,7 bar) on
Schedule 5 stainless steel pipe
• EPDM O-Ring (Black color) -4°F to 230°F (-20°C to
110°C) For Hot water, dilute acids, alkalies, oil free
air and many chemical services. Excellent oxidation
resistance. NOT FOR USE WITH HYDROCARBONS.
• Nitrile O-Ring (Brown color) -13°F to 230°F (-25°C to
110°C) Petroleum products, vegetable oils, mineral oils
and air with oils. NOT FOR USE WITH HOT WATER OR
HOT DRY AIR.
• Fluoroelastomer O-Ring (Green color) 32°F to 302°F
(0°C to 150°C) For oxidizing acids, petroleum products,
hydraulic fluids, lubricants, halogenated hydrocarbons.
Refer to back cover for country-specific customer care numbers.
STAINLESS STEEL G-PRESS SYSTEMS
• Hygienic material often used in food and the
pharmaceutical industry
157
G-PRESS SYSTEMS
G-PRESS Systems Specifications
Tech Data Sheet: G550
G-PRESS
Fitting Housing
Prepared
Pipe-end
Pipe Size
Nominal
Inches
mm
Pipe
Stop
O-ring
Compressed
O-ring
Completed
Fitting
And Pipe
Joint
O.D.
Inches
mm
1
O-ring
Bead
Press Deformation
On Fitting Housing
Area Beyond O-ring
Bead As Shown
Pipe Tolerance
Pipe OD
Pipe Wall
Tolerance
Thickness
+/Schedule 5
Inches
Inches
mm
mm
0.008
0.065
0,20
1,65
0.01
0.065
0,25
1,65
0.013
0.065
0,33
1,65
0.016
0.065
0,41
1,65
0.024
0.065
0,61
1,65
⁄2
15
3
⁄4
20
1
25
11 ⁄ 2
40
2
50
0.840
21,3
1.050
26,7
1.315
33,4
1.660
42,2
2.375
60,3
Pipework Support
Vertical
Intervals
Inches
mm
Horizontal
Intervals
Inches
mm
71
1800
79
2000
94
2400
118
3000
118
3000
47
1200
59
1500
71
1800
94
2400
94
2400
Miminum Fitting Distances
Pipe Size
Nominal
Inches
mm
1
STAINLESS STEEL G-PRESS SYSTEMS
⁄2
15
3
⁄4
20
1
25
11 ⁄ 2
40
2
50
O.D.
Inches
mm
A
Minimum
Distance
Between
Fittings
Inches
mm
L
Minimum
Pipe Length
Between
Fittings
Inches
mm
E
Socket
Insertion
Depth
Inches
mm
D
Fitting
Housing
Diameter
Inches
mm
0.39
10
0.39
10
0.39
10
0.39
10
0.79
20
1.97
50
1.97
50
1.97
50
2.44
62
3.15
80
1.38
35
1.38
35
1.38
35
1.38
35
1.38
35
3.35
85
3.50
89
3.74
95
4.76
121
5.79
147
0.840
21,3
1.050
26,7
1.315
33,4
1.660
42,2
2.375
60,3
L
A
E
D
Miminum Fitting Distances
Pipe Size
Nominal
Inches
mm
1
A
B
C
158
⁄2
15
3
⁄4
20
1
25
11 ⁄ 2
40
2
50
O.D.
Inches
mm
A
Minimum Wall to
Fitting Distance
Inches
mm
B
Minimum Horizontal
Pipe Distance
from Wall
Inches
mm
C
Minimum Vertical
Pipe Distance
from Wall
Inches
mm
0.840
21,3
1.050
26,7
1.315
33,4
1.660
42,2
2.375
60,3
1.38
35
1.38
35
1.38
35
1.38
35
1.38
35
1.38
35
1.38
35
1.38
35
1.38
35
1.38
35
3.35
85
3.50
89
3.74
95
4.76
121
5.79
147
www.grinnell.com
G-PRESS SYSTEMS
Figure 407 Straight Couplings
(Press x Press)
Tech Data Sheet: G550
A
B
Pipe Size
Nominal
Inches
mm
1
⁄2
15
3
⁄4
20
1
25
11 ⁄ 2
40
2
50
O.D.
Inches
mm
0.840
21,3
1.050
26,7
1.315
33,4
1.660
42,2
2.375
60,3
Dimensions - Inches mm
A
B
Weight
lbs
kg
0.42
10,7
0.44
11,2
0.43
10,9
0.43
10,9
0.50
12,7
2.09
53,1
2.33
59,2
2.48
63,0
2.84
72,1
4.05
102,9
0.13
0,1
0.18
0,1
0.23
0,1
0.40
0,2
0.74
0,3
Figure 408 Slip Couplings
(Press x Press)
A
A
Tech Data Sheet: G550
B
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
1
⁄2
0.840
15
21,3
3
⁄4
1.050
20
26,7
1
1.315
25
33,4
11 ⁄ 2
1.660
40
42,2
2
2.375
50
60,3
Dimensions - Inches mm
A
B
Weight
lbs
kg
0.83
21,1
0.95
24,1
1.02
25,9
1.20
30,5
1.77
45,0
2.95
74,9
3.40
86,4
3.83
97,3
4.81
122,2
6.76
171,7
0.18
0,1
0.25
0,1
0.34
0,2
0.63
0,3
1.13
0,5
See page 157 - 158 for G-PRESS specifications.
Refer to back cover for country-specific customer care numbers.
159
STAINLESS STEEL G-PRESS SYSTEMS
See page 157 - 158 for G-PRESS specifications.
G-PRESS SYSTEMS
Figure 468 90° Elbows
(Press x Press)
A
Tech Data Sheet: G550
A
B
B
Pipe Size
Nominal
Inches
mm
1
⁄2
15
3
⁄4
20
1
25
11 ⁄ 2
40
2
50
Dimensions - Inches mm
O.D.
Inches
mm
0.840
21,3
1.050
26,7
1.315
33,4
1.660
42,2
2.375
60,3
A
B
Weight
lbs
kg
1.57
39,9
1.89
48,0
2.37
60,2
2.56
65,0
3.23
82,0
2.41
61,2
2.84
72,1
3.40
86,4
3.76
95,5
5.00
127,0
0.22
0,1
0.33
0,2
0.48
0,2
0.79
0,4
1.39
0,6
STAINLESS STEEL G-PRESS SYSTEMS
See page 157 - 158 for G-PRESS specifications.
Figure 467 90° Elbows
(Male x Female)
Tech Data Sheet: G550
A
A
B
C
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
1
⁄2
0.840
15
21,3
3
⁄4
1.050
20
26,7
1
1.315
25
33,4
11 ⁄ 2
1.660
40
42,2
2
2.375
50
60,3
Dimensions - Inches mm
A
B
C
Weight
lbs
kg
1.57
39,9
1.89
48,0
2.37
60,2
2.48
63,0
3.23
82,0
2.87
72,9
3.27
83,1
3.82
97,0
4.06
103,1
5.52
140,2
2.41
61,2
2.84
72,1
3.40
86,4
3.69
93,7
5.00
127,0
0.24
0,1
0.33
0,2
0.37
0,2
0.77
0,4
1.34
0,6
See page 157 - 158 for G-PRESS specifications.
160
www.grinnell.com
G-PRESS SYSTEMS
Figure 471 45° Elbows
(Press x Press)
Tech Data Sheet: G550
B
A
B
A
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
1
⁄2
0.840
15
21,3
3
⁄4
1.050
20
26,7
1
1.315
25
33,4
11 ⁄ 2
1.660
40
42,2
2
2.375
50
60,3
Dimensions - Inches mm
A
B
Weight
lbs
kg
0.79
20,1
0.90
22,9
1.13
28,7
1.17
29,7
1.48
1.62
41,1
1.85
47,0
2.14
54,4
2.37
60,2
3.24
0.18
0,1
0.24
0,1
0.37
0,2
0.59
0,3
1.06
37,6
82,3
0,5
Figure 470 45° Elbows
(Male x Female)
Tech Data Sheet: G550
B
A
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
1
⁄2
0.840
15
21,3
3
⁄4
1.050
20
26,7
1
1.315
25
33,4
11 ⁄ 2
1.660
40
42,2
2
2.375
50
60,3
Dimensions - Inches mm
A
B
Weight
lbs
kg
0.79
20,1
0.90
22,9
1.13
28,7
1.17
29,7
1.48
37,6
1.62
41,1
1.85
47,0
2.14
54,4
2.37
60,2
3.24
82,3
0.20
0,1
0.26
0,1
0.37
0,2
0.60
0,3
1.06
0,5
See page 157 - 158 for G-PRESS specifications.
Refer to back cover for country-specific customer care numbers.
161
STAINLESS STEEL G-PRESS SYSTEMS
See page 157 - 158 for G-PRESS specifications.
G-PRESS SYSTEMS
Figure 442 Equal Tees
(Press x Press x Press)
C
Tech Data Sheet: G550
C
D
B
A
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
1
⁄2
0.840
15
21,3
3
⁄4
1.050
20
26,7
1
1.315
25
33,4
11 ⁄ 2
1.660
40
42,2
2
2.375
50
60,3
Dimensions - Inches mm
A
B
C
D
Weight
lbs
kg
1.28
32,5
1.50
38,1
1.78
45,2
2.40
61,0
3.22
81,8
0.80
20,3
0.92
23,4
1.07
27,2
1.36
34,5
1.61
40,9
1.48
37,6
1.70
43,2
1.91
48,5
2.41
61,2
3.39
86,1
1.64
41,7
1.87
47,5
2.09
53,1
2.57
65,3
3.39
86,1
0.24
0,1
0.33
0,2
0.46
0,2
0.84
0,4
1.48
0,7
See page 157 - 158 for G-PRESS specifications.
Figure 473 Reducing Tees
(Press x Press x Press)
STAINLESS STEEL G-PRESS SYSTEMS
Tech Data Sheet: G550
Pipe Size
C
C
D
A
162
B
Dimensions - Inches mm
Nominal
Inches
mm
3
⁄4 x 3 ⁄4 x 1 ⁄ 2
20 x 20 x 15
1 x 1 x 1⁄ 2
25 x 25 x 15
1 x 1 x 3 ⁄4
25 x 25 x 20
O.D.
Inches
mm
1.050 x 1.050 x 0.840
26,7 x 26,7 x 21,3
1.315 x 1.315 x 0.840
33,4 x 33,4 x 21,3
1.315 x 1.315 x 1.050
33,4 x 33,4 x 26,7
A
B
C
D
Weight
lbs
kg
1.50
38,1
1.78
45,2
1.78
45,2
0.91
23,1
1.06
26,9
1.07
27,2
1.70
43,2
1.91
48,5
1.91
48,5
1.74
44,2
1.89
48,0
2.02
51,3
0.31
0,1
0.40
0,2
0.42
0,2
11 ⁄ 2 x 11 ⁄ 2 x 1 ⁄ 2
1.900 x 1.900 x 0.840
2.40
1.35
2.41
2.19
0.68
40 x 40 x 15
11 ⁄ 2 x 11 ⁄ 2 x 3 ⁄ 4
40 x 40 x 20
11 ⁄ 2 x 11 ⁄ 2 x 1
40 x 40 x 25
2 x 2 x 1⁄ 2
50 x 50 x 15
2 x 2 x 3 ⁄4
50 x 50 x 20
2x2x1
50 x 50 x 25
2 x 2 x 11 ⁄ 2
50 x 50 x 40
48,3 x 48,3 x 21,3
1.900 x 1.900 x 1.050
48,3 x 48,3 x 26,7
1.900 x 1.900 x 1.315
48,3 x 48,3 x 33,4
2.375 x 2.375 x 0.840
60,3 x 60,3 x 21,3
2.375 x 2.375 x 1.050
60,3 x 60,3 x 26,7
2.375 x 2.375 x 1.315
60,3 x 60,3 x 33,4
2.375 x 2.375 x 1.900
60,3 x 60,3 x 48,3
61,0
2.40
61,0
2.40
61,0
3.22
81,8
3.22
81,8
3.22
81,8
3.22
81,8
34,3
1.37
34,8
1.36
34,5
1.60
40,6
1.62
41,1
1.61
40,9
1.61
40,9
61,2
2.41
61,2
2.41
61,2
3.39
86,1
3.39
86,1
3.39
86,1
3.39
86,1
55,6
2.31
58,7
2.39
60,7
2.44
62,0
2.56
65,0
2.62
66,5
2.82
71,6
0,3
0.70
0,3
0.75
0,3
1.17
0,5
1.19
0,5
1.23
0,6
1.32
0,6
See page 157 - 158 for G-PRESS specifications.
www.grinnell.com
G-PRESS SYSTEMS
Figure 478 Tee and Reducing Tee Adapters
(Press x Press x Female NPT)
Tech Data Sheet: G550
C
C
D
B
Pipe Size
Nominal
Inches
mm
1
⁄ 2 x 1⁄ 2 x 1⁄ 2
15 x 15 x 15
1
⁄ 2 x 1 ⁄ 2 x 3 ⁄4
15 x 15 x 20
3
⁄4 x 3 ⁄4 x 1 ⁄ 2
20 x 20 x 15
3
⁄4 x 3 ⁄4 x 3 ⁄4
20 x 20 x 20
3
⁄4 x 3 ⁄4 x 1
20 x 20 x 25
1 x 1 x 1⁄ 2
25 x 25 x 15
1 x 1 x 3 ⁄4
25 x 25 x 20
1 x 1 x 11 ⁄ 4
25 x 25 x 32
11 ⁄ 2 x 11 ⁄ 2 x 1 ⁄ 2
40 x 40 x 15
11 ⁄ 2 x 11 ⁄ 2 x 3 ⁄ 4
40 x 40 x 20
11 ⁄ 2 x 11 ⁄ 2 x 1
40 x 40 x 25
11 ⁄ 2 x 11 ⁄ 2 x 11 ⁄ 2
40 x 40 x 40
2 x 2 x 1⁄ 2
50 x 50 x 15
2 x 2 x 3 ⁄4
50 x 50 x 20
2x2x1
50 x 50 x 25
2x2x2
50 x 50 x 50
O.D.
Inches
mm
0.840 x 0.840 x 0.840
21,3 x 21,3 x 21,3
0.840 x 0.840 x 1.050
21,3 x 21,3 x 26,7
1.050 x 1.050 x 0.840
26,7 x 26,7 x 21,3
1.050 x 1.050 x 1.050
26,7 x 26,7 x 26,7
1.050 x 1.050 x 1.315
26,7 x 26,7 x 33,4
1.315 x 1.315 x 0.840
33,4 x 33,4 x 21,3
1.315 x 1.315 x 1.050
33,4 x 33,4 x 26,7
1.315 x 1.315 x 1.660
33,4 x 33,4 x 42,2
1.900 x 1.900 x 0.840
48,3 x 48,3 x 21,3
1.900 x 1.900 x 1.050
48,3 x 48,3 x 26,7
1.900 x 1.900 x 1.315
48,3 x 48,3 x 33,4
1.900 x 1.900 x 1.900
48,3 x 48,3 x 48,3
2.375 x 2.375 x 0.840
60,3 x 60,3 x 21,3
2.375 x 2.375 x 1.050
60,3 x 60,3 x 26,7
2.375 x 2.375 x 1.315
60,3 x 60,3 x 33,4
2.375 x 2.375 x 2.375
60,3 x 60,3 x 60,3
Dimensions - Inches mm
A
B
C
D
Weight
lbs
kg
1.28
32,5
1.28
32,5
1.50
38,1
1.50
38,1
1.50
38,1
1.78
45,2
1.78
45,2
1.78
45,2
2.40
61,0
2.40
61,0
2.40
61,0
2.40
61,0
3.22
81,8
3.22
81,8
3.22
81,8
3.22
81,8
0.93
23,6
1.30
33,0
1.04
26,4
1.27
32,3
1.29
32,8
1.19
30,2
1.42
36,1
1.38
35,1
1.48
37,6
1.71
43,4
1.59
40,4
1.74
44,2
1.73
43,9
1.96
49,8
1.84
46,7
2.14
54,4
1.48
37,6
1.48
37,6
1.70
43,2
1.70
43,2
1.70
43,2
1.91
48,5
1.91
48,5
1.91
48,5
2.41
61,2
2.41
61,2
2.41
61,2
2.41
61,2
3.39
86,1
3.39
86,1
3.39
86,1
3.39
86,1
1.52
38,6
1.84
46,7
1.63
41,4
1.81
46,0
1.97
50,0
1.78
45,2
1.96
49,8
2.13
54,1
2.07
52,6
2.25
57,2
2.27
57,7
2.58
65,5
2.32
58,9
2.50
63,5
2.52
64,0
3.19
81,0
0.26
0,1
0.37
0,2
0.33
0,2
0.40
0,2
0.46
0,2
0.42
0,2
0.48
0,2
0.66
0,3
0.70
0,3
0.77
0,4
0.84
0,4
1.21
0,6
1.19
0,5
1.26
0,6
1.32
0,6
1.90
0,9
STAINLESS STEEL G-PRESS SYSTEMS
A
See page 157 - 158 for G-PRESS specifications.
Refer to back cover for country-specific customer care numbers.
163
G-PRESS SYSTEMS
Figure 474 Reducers
(Female Press x Male Press)
Tech Data Sheet: G550
Pipe Size
A
B
Nominal
Inches
mm
3
⁄4 x 1 ⁄ 2
20 x 15
1 x 1⁄ 2
25 x 15
1 x 3 ⁄4
25 x 20
11 ⁄ 2 x 1 ⁄ 2
40 x 15
11 ⁄ 2 x 3 ⁄ 4
40 x 20
11 ⁄ 2 x 1
40 x 25
2 x 1⁄ 2
50 x 15
2 x 3/4
50 x 20
2x1
50 x 25
2 x 11 ⁄ 2
50 x 40
O.D.
Inches
mm
1.050 x 0.840
26,7 x 21,3
1.315 x 0.840
33,4 x 21,3
1.315 x 1.050
33,4 x 26,7
1.900 x 0.840
48,3 x 21,3
1.900 x 1.050
48,3 x 26,7
1.900 x 1.315
48,3 x 33,4
2.375 x 0.840
60,3 x 21,3
2.375 x 1.050
60,3 x 26,7
2.375 x 1.315
60,3 x 33,4
2.375 x 1.900
60,3 x 48,3
Dimensions - Inches mm
A
B
Weight
lbs
kg
1.21
30,7
2.58
65,5
1.75
44,5
1.15
29,2
1.60
40,6
1.29
32,8
1.62
41,1
1.59
40,4
1.55
39,4
2.64
67,1
3.04
77,2
4.34
110,2
3.76
95,5
3.42
86,9
3.55
90,2
3.56
90,4
4.23
107,4
4.34
110,2
4.37
111,0
5.30
134,6
0.18
0,1
0.28
0,1
0.26
0,1
0.33
0,1
0.55
0,2
0.37
0,2
0.53
0,2
0.35
0,2
0.57
0,3
0.70
0,3
STAINLESS STEEL G-PRESS SYSTEMS
See page 157 - 158 for G-PRESS specifications.
Figure 476 Straight Connectors
(Female Press x Male NPT)
Tech Data Sheet: G550
A
B
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
1
⁄ 2 x 1⁄ 2
0.840 x 0.840
15 x 15
21,3 x 21,3
1
⁄ 2 x 3 ⁄4
0.840 x 1.050
15 x 20
21,3 x 26,7
1
⁄2 x 1
0.840 x 1.315
15 x 20
21,3 x 33,4
3
⁄4 x 3 ⁄4
1.050 x 1.050
20 x 20
26,7 x 26,7
3
⁄4 x 1
1.050 x 1.315
20 x 25
26,7 x 33,4
1x1
1.315 x 1.315
25 x 25
33,4 x 33,4
1 x 11 ⁄ 2
1.315 x 1.900
25 x 40
33,4 x 48,3
11 ⁄ 2 x 11 ⁄ 2
1.900 x 1.900
40 x 40
48,3 x 48,3
2 x 11 ⁄ 2
2.375 x 1.900
50 x 40
60,3 x 48,3
2x2
2.375 x 2.375
50 x 50
60,3 x 60,3
Dimensions - Inches mm
A
B
Weight
lbs
kg
0.72
18,3
0.81
20,6
0.83
21,1
0.83
21,1
0.85
21,6
0.83
21,1
0.92
23,4
0.92
23,4
0.91
23,1
0.91
23,1
2.14
54,4
2.35
59,7
2.44
62,0
2.43
61,7
2.52
64,0
2.64
67,10
2.90
73,7
3.09
78,5
3.17
80,5
3.74
95,0
0.15
0,1
0.20
0,1
0.29
0,1
0.22
0,1
0.31
0,1
0.29
0,1
0.62
0,3
0.68
0,3
0.97
0,4
1.01
0,5
See page 157 - 158 for G-PRESS specifications.
164
www.grinnell.com
G-PRESS SYSTEMS
Figure 479 Straight Connectors
(Female Press x Female NPT)
Tech Data Sheet: G550
Pipe Size
Nominal
Inches
mm
1
⁄ 2 x 3 ⁄4
15 x 20
1
⁄2 x 1
15 x 25
3
⁄4 x 3 ⁄4
20 x 20
3
⁄4 x 1
20 x 25
1x1
25 x 25
1 x 11 ⁄ 2
25 x 40
11 ⁄ 2 x 11 ⁄ 2
40 x 40
11 ⁄ 2 x 2
40 x 50
2 x 11 ⁄ 2
50 x 40
2x2
50 x 50
Dimensions - Inches mm
O.D.
Inches
mm
0.840 x 1.050
21,3 x 26,7
0.840 x 1.315
21,3 x 33,4
1.050 x 1.050
26,7 x 26,7
1.050 x 1.315
26,7 x 33,4
1.315 x 1.315
33,4 x 33,4
1.315 x 1.900
33,4 x 48,3
1.900 x 1.900
48,3 x 48,3
1.900 x 2.375
48,3 x 60,3
2.375 x 1.900
60,3 x 48,3
2.375 x 2.375
60,3 x 60,3
A
B
Weight
lbs
kg
0.93
23,6
0.98
24,9
1.00
25,4
1.00
25,4
0.86
21,8
1.26
32,0
1.01
25,7
1.39
35,3
1.36
34,5
1.15
29,2
2.47
62,7
2.47
62,7
2.56
65,0
2.56
65,0
2.56
65,0
3.06
77,7
3.06
77,7
3.65
92,7
3.98
101,1
3.98
101,1
0.31
0,1
0.26
0,1
0.51
0,2
0.44
0,2
0.31
0,1
1.28
0,6
0.82
0,4
1.21
0,5
1.83
0,8
1.17
0,5
A
B
Figure 485 3-Piece Unions
(Press x Press)
Tech Data Sheet: G550
A
B
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
1
Dimensions - Inches mm
A
B
Weight
lbs
kg
⁄2
0.840
2.35
4.02
0.62
15
3
⁄4
20
1
25
11 ⁄ 2
40
2
50
21,3
1.050
26,7
1.315
33,4
1.660
42,2
2.375
60,3
59,7
2.64
67,1
2.72
69,1
3.88
98,6
4.72
119,0
102,1
4.54
115,3
4.76
120,9
6.29
159,8
8.26
209,8
0,3
0.82
0,4
0.97
0,4
2.36
1,1
3.70
1,7
See page 157 - 158 for G-PRESS specifications.
Refer to back cover for country-specific customer care numbers.
165
STAINLESS STEEL G-PRESS SYSTEMS
See page 157 - 158 for G-PRESS specifications.
G-PRESS SYSTEMS
Figure 484 End Caps
(Female Press)
A
Tech Data Sheet: G550
B
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
1
⁄2
0.840
15
21,3
3
⁄4
1.050
20
26,7
1
1.315
25
33,4
11 ⁄ 2
1.660
40
42,2
2
2.375
50
60,3
Dimensions - Inches mm
A
B
Weight
lbs
kg
0.72
18,3
0.79
20,1
0.83
21,1
0.95
24,1
1.14
29,0
1.56
39,6
1.74
44,2
1.85
47,0
2.15
54,6
2.91
73,9
0.09
0,1
0.13
0,1
0.18
0,1
0.33
0,1
0.55
0,2
See page 157 - 158 for G-PRESS specifications.
Figure 466 Van Stone Flange Adapters
(Female Press x Flange)
STAINLESS STEEL G-PRESS SYSTEMS
Tech Data Sheet: G550
A
B
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
1
⁄2
0.840
15
21,3
3
⁄4
1.050
20
26,7
1
1.315
25
33,4
11 ⁄ 2
1.660
40
42,2
2
2.375
50
60,3
Dimensions - Inches mm
A
B
Weight
lbs
kg
3.11
79,0
3.23
82,0
3.30
83,8
3.45
87,6
4.56
115,8
1.17
29,8
1.42
36,1
1.78
45,2
2.59
65,8
3.45
87,6
0.93
0,4
1.37
0,6
1.87
0,8
2.98
1,4
4.75
2,2
See page 157 - 158 for G-PRESS specifications.
Flange material is AISI 304 and the body is AISI 316/316L.
166
www.grinnell.com
G-PRESS SYSTEMS
Figure 475 Flange Adapters
A
(Female Press x Flange)
B
Tech Data Sheet: G550
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
1
⁄2
0.840
15
21,3
3
⁄4
1.050
20
26,7
1
1.315
25
33,4
11 ⁄ 2
1.660
40
42,2
2
2.375
50
60,3
Dimensions - Inches mm
A
B
Weight
lbs
kg
1.95
49,5
2.15
54,6
2.52
64,0
3.39
86,1
4.87
123,7
0.94
23,9
1.16
29,5
1.44
36,6
2.08
52,9
2.90
73,7
0.90
0,4
1.30
0,6
1.83
0,8
3.03
1,4
4.91
2,2
See page 157 - 158 for G-PRESS specifications.
Figure 469 Ball Valves
(Press x Press)
STAINLESS STEEL G-PRESS SYSTEMS
Tech Data Sheet: G550
B
C
A
D
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
1
⁄2
0.840
15
21,3
3
⁄4
1.050
20
26,7
1
1.315
25
33,4
11 ⁄ 2
1.660
40
42,2
2
2.375
50
60,3
Dimensions - Inches mm
A
B
C
D
Weight
lbs
kg
3.16
80,3
3.59
91,2
3.99
101,3
5.05
128,3
5.84
148,3
3.94
100,1
4.92
125,0
5.87
149,1
7.48
190,0
7.48
190,0
2.44
62,0
2.44
62,0
3.03
77,0
3.94
100,1
4.25
108,0
4.84
122,9
5.49
139,4
6.03
153,2
7.45
189,2
9.38
238,3
1.24
0,6
1.73
0,8
2.46
1,1
5.93
2,7
8.48
3,8
See page 157 - 158 for G-PRESS specifications.
Refer to back cover for country-specific customer care numbers.
167
G-PRESS SYSTEMS
STAINLESS STEEL G-PRESS SYSTEMS
Notes
168
www.grinnell.com
169
HDPE SYSTEMS
HDPE Systems Table of Contents
MATERIAL SPECIFICATIONS
Figure 9095
HDPE Couplings
Page 171
Coupling Ductile Iron Housing
Specifications
• ASTM A 536 – Standard specification for ductile iron
castings, Grade 65-45-12
Bolt/Nut Specifications
Figure 9097
HDPE Transition Couplings
Page 172
Figure 9094
HDPE Flange Couplings
Page 173
• ANSI: Carbon steel oval neck bolts & nuts are heattreated and conform to the physical properties of
ASTM A 183 Grade 2 and SAE J429 Grade 5 with a
minimum tensile strength of 110,000 psi (7584,2 bar).
Carbon Steel heavy hex nuts conform to the physical
properties of ASTM A 183 Grade 2 and SAE J995
Grade 5. Bolts and nuts are zinc-electroplated
conforming to ASTM B 633.
• Metric: Carbon steel oval neck track head bolts (Gold
color coded) are heat treated and conform to the
physical properties of ASTM F 568 M with a minimum
tensile strength of 760 MPa.
Carbon Steel heavy hex nuts conform to the physical
properties of ASTM A 563 M Class 9. Bolts and nuts
are zinc-electroplated conforming to ASTM B 633.
• Stainless steel bolts and nuts are available upon
request.
Gasket Specifications
HDPE SYSTEMS
• Grade “E” EPDM gaskets have a Green color
code identification and conform to ASTM D 2000 for
service temperatures from -30°F to 230°F (-34°C to
110°C). They are recommended for hot water not to
exceed 230°F (110°C), plus a variety of dilute acids,
oil free air, and many chemical services. They are not
recommended for petroleum services.
• Grade “T” Nitrile (Color code: Orange stripe)
Recommended for petroleum products, air with oil
vapors, vegetable and mineral oils within the specified
temperature range. Also good for water services under
150°F (66°C). Temperature range: -20°F to +180°F
(-29°C to +82°C).
Do not use for HOT WATER above 150°F (66°C) or
HOT DRY AIR above 140°F (60°C).
Coatings
• Orange – Non-lead paint (standard)
• Red – Non-lead paint (optional, regional)
• Hot-Dipped, Zinc galvanized (optional)
170
www.grinnell.com
HDPE SYSTEMS
Figure 9095 HDPE Couplings
Tech Data Sheet: G580
The GRINNELL Figure 9095 HDPE Coupling is specially designed
for joining sections of high-density polyethylene (HDPE) piping. The
GRINNELL Figure 9095 features a four-bolt coupling design with
machined gripping teeth to positively secure high-density polyethylene
piping and create a leak-tight joint.
The contoured housing features an integrated ramp design that helps
avoid obstacles while relocating pipe runs. This coupling is ideal for
mining, irrigation, and tunnelling applications.
C
B
A
Dimensions - Inches mm
A
B
C
3.39
86,0
4.61
117,0
5.75
146,0
7.87
200,0
10.39
264,0
12.52
318,0
14.37
365,0
16.26
413,0
18.39
467,0
20.28
515,0
22.36
568,0
5.24
133,0
6.50
165,0
7.99
203,0
10.75
273,0
13.11
333,0
15.63
397,0
17.64
448,0
19.37
492,0
21.38
543,0
23.43
595,0
25.63
651,0
4.61
117,0
4.02
102,0
5.75
146,0
5.87
149,0
5.98
152,0
6.50
165,0
7.87
200,0
10.12
257,0
10.12
257,0
10.24
260,0
10.24
260,0
Coupling
Bolt Size
Inches
1
⁄ 2 x 23 ⁄ 8
–
1
⁄ 2 x 23 ⁄4
–
1
⁄2 x 3
–
5
⁄ 8 x 31 ⁄ 2
–
5
⁄ 8 x 31 ⁄ 2
–
3
⁄4 x 43 ⁄4
–
3
⁄4 x 43 ⁄4
–
1x6
–
1x6
–
1x6
–
1x6
–
Approx.
Weight
Lbs.
kg
5.7
2,6
7.9
3,6
11.4
5,2
18.0
8,2
27.5
12,5
44.0
20,0
56.1
25,5
90.6
41,2
97.2
44,2
111.1
50,5
136.0
61,8
HDPE SYSTEMS
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
2
2.375
50
60,3
3
3.500
80
88,9
4
4.500
100
114,3
6
6.625
150
168,3
8
8.625
200
219,1
10
10.750
250
273,0
12
12.750
300
323,9
14
14.000
350
355,6
16
16.000
400
406,4
18
18.000
450
457,2
20
20.000
500
508,0
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 170 for HDPE coupling specifications and pages 191 - 198 for gasket information.
See page 174 for pipe wall thickness and standard dimension ratio information.
Refer to back cover for country-specific customer care numbers.
171
HDPE SYSTEMS
Figure 9097 HDPE Transition Couplings
Tech Data Sheet: G582
The GRINNELL Figure 9097 HDPE Transition Coupling provides for an
efficient transition from grooved piping systems to high-density polyethylene
(HDPE) piping. The GRINNELL Figure 9097 features a four-bolt coupling
design with one side of machine gripping teeth and a grooved end creating
a leak-tight joint between high-density polyethylene and grooved piping
systems.
The contoured housing features the same integrated ramp design as the
GRINNELL Figure 9095, which helps avoid obstacles while relocating
pipe runs. This coupling is ideal for mining, irrigation, and tunnelling
applications.
C
B
A
Pipe Size
HDPE SYSTEMS
Nominal
Inches
mm
2
50
3
80
4
100
6
150
8
200
10
250
12
300
Dimensions - Inches mm
O.D.
Inches
mm
2.375
60,3
3.500
88,9
4.500
114,3
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
A
B
C
3.39
86,0
4.49
114,0
5.75
146,0
8.00
203,0
10.51
267,0
12.64
321,0
14.76
375,0
5.99
152,0
7.13
181,0
8.50
216,0
11.26
286,0
13.63
346,0
17.00
432,0
19.49
495,0
3.11
79,0
3.11
79,0
3.74
95,0
3.74
95,0
4.25
108,0
5.00
127,0
5.00
127,0
Coupling
Bolt Size
Inches
1
⁄ 2 x 23 ⁄ 8
–
1
⁄2 x 3
–
1
⁄2 x 3
–
5
⁄ 8 x 31 ⁄ 2
–
5
⁄ 8 x 31 ⁄ 2
–
3
⁄4 x 43 ⁄4
–
3
⁄4 x 43 ⁄4
–
Approx.
Weight
Lbs.
kg
4.4
2,0
5.9
2,7
8.4
3,8
12.5
5,7
21.3
9,7
35.2
16,0
43.1
19,6
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 170 for HDPE coupling specifications and pages 191 - 198 for gasket information.
See page 174 for pipe wall thickness and standard dimension ratio information.
172
www.grinnell.com
HDPE SYSTEMS
Figure 9094 Flange Couplings
Tech Data Sheet: G584
The GRINNELL Figure 9094 HDPE Flange Coupling provides for
an efficient transition from high-density polyethylene (HDPE) piping
to ANSI class 125# or 150# flanged piping system. This coupling
is ideal for mining, irrigation, and tunnelling applications.
B
C
A
Dimensions - Inches mm
A
B
C
9.00
229,0
11.00
279,0
13.50
343,0
10.25
260,0
12.25
311,0
14.75
375,0
3.10
79,0
3.75
95,0
3.42
87,0
Coupling Bolts ‡
Quantity
Bolt Size
Inches
5
8
8
8
⁄ 8 x 31 ⁄ 4
–
3
⁄ 4 x 31 ⁄ 2
–
3
⁄4 x 33 ⁄4
–
Approx.
Weight
Lbs.
kg
HDPE SYSTEMS
Pipe Size
Nominal
O.D.
Inches
Inches
mm
mm
4
4.500
100
114,3
6
6.625
150
168,3
8
8.625
200
219,1
15.0
6,8
21.5
9,8
28.8
13,1
‡ Mating bolts and nuts are not supplied. Flange mating bolts must be at least SAE J429, Grade 5 or stronger.
It is the responsibility of the purchaser to verify correct length for the intended application.
For information on larger sizes, contact GRINNELL Mechanical Products.
See page 170 for HDPE coupling specifications and pages 191 - 198 for gasket information.
See page 174 for pipe wall thickness and standard dimension ratio information.
Refer to back cover for country-specific customer care numbers.
173
HDPE SYSTEMS
HDPE Pipe Wall Thickness
and Standard Dimension Ratios
Tech Data Sheet: G580, G582, G584
Pipe Size
Nominal
Inches
mm
O.D.
Inches
mm
Tol.
+/Inches
mm
2
50
3
80
4
100
6
150
8
200
10
250
12
300
2.375
60,3
3.500
88,9
4.500
114,3
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
0.006
0,15
0.016
0,41
0.020
0,51
0.030
0,76
0.039
0,99
0.048
1,22
0.057
1,45
Pipe Wall Thickness and Standard Dimension Ratio
Max. Pipe
Ovality
+/Inches
mm
0.035
0,89
0.040
1,02
0.040
1,02
0.050
1,27
0.075
1,91
0.075
1,91
0.075
1,91
SDR
7.3
Inches
mm
SDR
9
Inches
mm
SDR
11
Inches
mm
SDR
15.5
Inches
mm
SDR
17
Inches
mm
SDR
21
Inches
mm
SDR
32.5
Inches
mm
0.325
8,3
0.479
12,2
0.616
15,6
0.908
23,1
1.182
30,0
1.473
37,4
1.747
44,4
0.264
6,7
0.389
9,9
0.500
12,7
0.736
18,7
0.958
24,3
1.194
30,3
1.417
36,0
0.216
5,5
0.318
8,1
0.409
10,4
0.602
15,3
0.784
19,9
0.977
24,8
1.159
29,4
0.153
3,9
0.226
5,7
0.290
7,4
0.427
10,8
0.556
14,1
0.694
17,6
0.823
20,9
0.140
3,6
0.206
5,2
0.265
6,7
0.327
8,3
0.507
12,9
0.632
16,1
0.750
19,1
0.113
2,9
0.167
4,2
0.214
5,4
0.265
6,7
0.340
8,6
0.512
13,0
0.607
15,4
–
–
0.108
2,7
0.138
3,5
0.204
5,2
0.265
6,7
0.331
8,4
0.392
10,0
HDPE SYSTEMS
Per Specification for Polyethylene (P.E.) Plastic Pipe ASTM F714, D2447, D3035.
174
www.grinnell.com
175
G-MINE PVC SYSTEMS
G-MINE PVC Systems Table of Contents
Figure 72900
SDR Pipe (Spline x Spline)
Page 178
Figure 72901
SDR Pipe with Coupling
(Male Spline x Female Spline)
Page 179
Figure 72904
Couplings (Spline x Spline)
Page 180
Figure 72905
Weld Couplings
(Spline x Solvent Weld)
Page 180
Figure 72919
Reducing Couplings
(Male Spline x Female Spline)
Page 181
Figure 72940
Outlet Couplings
(Male Spline x Female Spline x
Female Thread)
Page 181
Figure 72930
Outlet Couplings
(Spline x Spline x
Female Thread)
Page 182
G-MINE PVC SYSTEMS
Figure 72906
End Nipples
(Spline x Plain End)
Page 182
Figure 72907
Nipples
(Spline x Groove)
Page 183
Figure 72908
Nipples
(Spline x Male Thread)
Page 183
Figure 72909
Nipples
(Plain End x Male Thread)
Page 184
Figure 72911
Nipples
(Spline x Spline)
Page 184
176
Figure 72910
90° Elbows
(Spline x Spline)
Page 185
Figure 72912
45° Elbows
(Spline x Spline)
Page 185
Figure 72913
90° Sweep Elbows
(Spline x Spline)
Page 186
Figure 72914
45° Sweep Elbows
(Spline x Spline)
Page 186
Figure 72915
Caps & Plugs
(Spline)
Page 187
Figure 72916
Flange Adapters
(Spline x Flange)
Page 187
Figure 72917
Tees
(Spline x Spline x Spline)
Page 188
Figure 72918
Reducing Tees
(Spline x Spline x Spline)
Page 188
Figure B8200L
Butterfly Valves
(Spline x Spline)
Page 189
Figures 72999, 72899,
and ITGM
Spare Parts
Page 190
www.grinnell.com
G-MINE PVC SYSTEMS
G-MINE PVC Systems
Tech Data Sheet: G590
Approvals:
Pipe Specifications:
• All G-MINE Pipe and Fittings are NSF-14 Compliant except
for SDR 13.5 which is NSF-61.
Materials:
• Pipe and fittings are made of high- strength PVC (Poly Vinyl
Chloride) conforming to ASTM D 1784.
• G-MINE PVC Joints meet the requirements of ASTM D 3139.
• O-rings are Teflon-coated, Nitrile Butadiene Rubber (NBR) or
Polyisoprene Rubber conforming to ASTM F 477.
• Spline is Nylon. Available in Acid-resistant Polyvinylidene
Flouride.
Nominal Property Values
Pipe Property
Test Method
Izod Impact
ASTM D 256
Tensile
Strength
Modulus of
Elasticity
Deflection
Temperature
Flammability
Value
1.15 Ft.-Lbs./In. of Notch
(16.8 N/m)
ASTM D 638
7,000 psi (482 bar)
ASTM D 638
400,000 psi (27579 bar)
ASTM D 648
158°F (70°C)
ASTM D 635
Self-Extinguishing
Pipe Imact Strength Production Specification
PVC Temperature Service Factor:
0.80
0.60
0.40
0.75
0.62
0.50
0.40
0.30
0.22
Nominal Size
Inches
2
3
4
6
0.20
0
70 80 90 100 110 120 130 140
TEMPERATURE, °F
FIGURE 1
PVC TEMPERATURE
SERVICE FACTOR
8
SDR 21
(Ft. - Lbs.)
(N/m)
—
—
255
3721
380
5545
495
7223
SDR 17
(Ft. - Lbs.)
(N/m)
170
2480
245
3575
320
4670
470
6859
610
8902
SDR 13.5*
(Ft. - Lbs.)
(N/m)
170
2480
245
3575
320
4670
470
6859
610
8902
*High-pressure pipe
G-MINE PVC SYSTEMS
• The PVC material’s impact
strength increases and the
tensile strength decreases
as the temperature rises.
Because of this effect,
the pressure rating of the
pipe and fittings must be
decreased to allow for safe
operation of the line at
elevated temperatures.
PVC SERVICE FACTOR
• All pressure ratings for PVC pipe are determined in a water
environment of 73.4°F (23°C) ( (±3.6°F). As the temperature
of the environment increases, PVC Pipe becomes more ductile.
This is represented by the
1.00
0.88
1.00
graph (Figure 1).
Refer to back cover for country-specific customer care numbers.
177
G-MINE PVC SYSTEMS
Figure 72900 SDR Pipe
(Spline x Spline)
Tech Data Sheet: G590
The GRINNELL Figure 72900 G-MINE PVC Pipe provides a flexible piping
system that is non-corrosive and resistant to harsh environments, acids,
and most chemicals. Its specially formulated compound contains impact
modifiers and UV (Ultraviolet) inhibitors that provide higher impact strength
over an extended period of time. Pipe is available in 20 foot (6,1m) laying
lengths (19 foot (5,8m) lengths are available for export from USA).
C
G1
PIPE LENGTH, 20'-0"
G 2 O.D.
O.D.
15°
SEE GROOVE DETAIL
P
G-MINE PVC SYSTEMS
GROOVE DETAIL
Nom.
Size
In.
mm
O.D.
In.
mm
2
50
3
80
4L
100
4
100
4H
100
6L
150
6
150
6H
150
8L
200
8
200
8H
200
2.375
60,3
3.50
88,9
4.50
114,3
4.50
114,3
4.50
114,3
6.625
168,3
6.625
168,3
6.625
168,3
8.625
219,1
8.625
219,1
8.625
219,1
SDR
SDR
17
SDR
17
SDR
21
SDR
17
SDR
13.5
SDR
21
SDR
17
SDR
13.5
SDR
21
SDR
17
SDR
13.5
Max.
Pressure
Rating
psi bar
P
In.
mm
C
In.
mm
G1
Width
In.
mm
G2
Depth
In.
mm
250
17,2
250
17,2
200
13,8
250
17,2
315
21,7
200
13,8
250
17,2
315
21,7
200
13,8
250
17,2
315
21,7
0.188
4,8
0.188
4,8
0.188
4,8
0.188
4,8
0.188
4,8
0.313
8,0
0.313
8,0
0.313
8,0
0.625
16,7
0.625
16,7
0.625
16,7
1.75
44,5
2.50
63,5
3.00
76,2
3.00
76,2
3.00
76,2
3.00
76,2
3.00
76,2
3.00
76,2
3.16
80,3
3.16
80,3
3.16
80,3
0.250
6,4
0.375
9,5
0.375
9,5
0.375
9,5
0.375
9,5
0.375
9,5
0.375
9,5
0.375
9,5
0.500
12,7
0.500
12,7
0.500
12,7
0.100
2,5
0.135
3,4
0.135
3,4
0.135
3,4
0.135
3,4
0.135
3,4
0.135
3,4
0.135
3,4
0.145
3,7
0.145
3,7
0.145
3,7
Min.
Wall
Thk.
In.
mm
0.140
3,6
0.206
5,2
0.214
5,4
0.265
6,7
0.333
8,5
0.316
8,0
0.390
9,9
0.491
12,5
0.410
10,4
0.508
12,9
0.639
16,2
Approx.
Pipe
Weight
Lbs./Ft.
Kg/M
0.64
0,3
1.37
0,6
1.86
0,8
2.25
1,0
2.85
1,3
3.99
1,8
4.87
2,2
6.07
2,8
6.71
3,0
8.16
3,7
10.30
4,7
Laying length is 20 foot (6,1 m) (19 foot (5,8m) lengths are available for export from USA).
G-MINE Pipe is produced with thickened ends to accommodate the G-MINE groove while maintaining their designed pressure rating. Grooving the nonthickened pipe body will result in less-than-designed pressure rating for the new joint and ultimately the entire system. When fabrication is required
for non-thickened end products, apply a Figure 72905 G-MINE x Solvent Weld Transition Coupling.
10" and 12" (250 and 300mm) are available upon request. Contact GRINNELL Mechanical Products.
See G-MINE specifications on page 177.
178
www.grinnell.com
G-MINE PVC SYSTEMS
Figure 72901 SDR Pipe with Coupling
(Male Spline x Female Spline)
Tech Data Sheet: G590
The GRINNELL Figure 72901 G-MINE PVC Pipe and Coupling (packaged
together) provide a flexible piping system that is non-corrosive and resistant
to harsh environments, acids, and most chemicals. GRINNELL Figure 72901
includes a G-MINE PVC Pipe and Coupling, an O-Ring and a Spline. Pipe
laying length is 20 foot (6,1m) (19 foot (5,8m) lengths are available for export
from USA).
FIGURE 72904
G-MINE COUPLING
PIPE LENGTH, 20'-0"
C
G1
G2
O.D.
O.D.
15°
B.O.D.
L
SEE GROOVE DETAIL
P
Nom.
Size
In.
mm
O.D.
In.
mm
2
2.375
50
60,3
3
3.50
80
88,9
4 L*
4.50
100
114,3
4
4.50
100
114,3
4 H*
4.50
100
114,3
6 L*
6.625
150
168,3
6
6.625
150
168,3
6 H*
6.625
150
168,3
8 L*
8.625
200
219,1
8
8.625
200
219,1
8 H*
8.625
200
219,1
Max.
Pressure
Rating
psi bar
B.O.D.
In.
mm
L
In.
mm
P
In.
mm
C
In.
mm
G1
Width
In.
mm
G2
Depth
In.
mm
Min.
Wall
Thk.
In.
mm
Approx.
Pipe
Weight
Lbs./Ft.
Kg/M
250
3.20
5.25
0.188
1.75
0.250
0.100
0.14
0.69
17,2
81
133,4
4,8
44,5
6,4
2,5
3,6
0,31
250
4.38
7.25
0.188
2.50
0.375
0.135
0.21
1.48
17,2
111
184,2
4,8
63,5
9,5
3,4
5,2
0,67
200
5.47
8.25
0.188
3.00
0.375
0.135
0.21
2.11
13,8
139
209,6
4,8
76,2
9,5
3,4
5,4
0,96
250
5.47
8.25
0.188
3.00
0.375
0.135
0.27
2.50
17,2
139
209,6
4,8
76,2
9,5
3,4
6,7
1,13
SDR
13.5
315
5.96
8.25
0.188
3.00
0.375
0.135
0.33
3.10
21,7
151
209,6
4,8
76,2
9,5
3,4
8,5
1,41
SDR
21
200
7.84
8.25
0.313
3.00
0.375
0.135
0.32
4.30
13,8
199
209,6
8,0
76,2
9,5
3,4
8,0
1,96
SDR
17
250
7.84
8.25
0.313
3.00
0.375
0.135
0.39
5.18
17,2
199
209,6
8,0
76,2
9,5
3,4
9,9
2,34
SDR
13.5
315
8.37
8.25
0.313
3.00
0.375
0.135
0.49
6.59
21,7
213
209,6
8,0
76,2
9,5
3,4
12,5
2,99
SDR
21
200
10.19
10.13
0.625
3.16
0.500
0.145
0.41
7.26
13,8
259
257,3
16,7
80,3
12,7
3,7
10,4
3,29
SDR
17
250
10.95
10.13
0.625
3.16
0.500
0.145
0.51
8.71
17,2
278
257,3
16,7
80,3
12,7
3,7
12,9
3,95
SDR
13.5
315
10.95
10.13
0.625
3.16
0.500
0.145
0.64
11.30
21,7
278
257,3
16,7
80,3
12,7
3,7
16,2
5,13
SDR
SDR
17
SDR
17
SDR
21
SDR
17
G-MINE PVC SYSTEMS
GROOVE DETAIL
Laying length is 20 foot (6,1 m) (19 foot (5,8m) lengths are available for export from USA).
G-MINE Pipe is produced with thickened ends to accommodate the G-MINE groove while maintaining their designed pressure rating. Grooving the nonthickened pipe body will result in less-than-designed pressure rating for the new joint and ultimately the entire system. When fabrication is required
for non-thickened end products, apply a Figure 72905 G-MINE x Solvent Weld Transition Coupling.
G-MINE Coupling, Gaskets (O-rings) and Splines included.
Refer to Figure 72904 for weight of G-MINE Coupling.
See G-MINE specifications on page 177.
Refer to back cover for country-specific customer care numbers.
179
G-MINE PVC SYSTEMS
Figure 72904 Couplings
(Spline x Spline)
The GRINNELL Figure 72904 G-MINE Coupling provides a connection
between two pieces of G-MINE PVC Pipe. G-MINE Couplings are
designed for non-permanent use applications and are supplied with
O-rings (gaskets) for ease of assembly and disassembly.
Tech Data Sheet: G590
L
B.O.D.
Nominal
Size
Inches
mm
2
50
3
80
4
100
4H
100
6
150
6H
150
8
200
8H
200
B.O.D.
Inches
mm
L
Inches
mm
3.20
81
4.375
111
5.47
139
5.96
151
7.84
199
8.37
213
10.19
259
10.95
278
5.25
133,4
7.25
184,2
8.25
209,6
8.25
209,6
8.25
209,6
8.25
209,6
10.125
257,3
10.125
257,3
Max.
Pressure
Rating
psi bar
250
17,2
250
17,2
250
17,2
315
21,7
250
17,2
315
21,7
250
17,2
315
21,7
Approx.
Weight
Lbs.
Kg
1.05
0,5
2.17
1,0
4.92
2,2
5.00
2,3
6.20
2,8
10.40
4,7
10.93
5,0
20.00
9,1
G-MINE Gaskets (O-rings) and Splines included.
10" and 12" (250 and 300mm) are available upon request. Contact GRINNELL
Mechanical Products.
See G-MINE specifications on page 177.
Figure 72905 Couplings
(Spline x Solvent Weld)
The GRINNELL Figure 72905 G-MINE Transition Coupling (Female x Solvent
Weld) provides an efficient transition from G-MINE PVC Pipe to plain-end
PVC pipe.
G-MINE PVC SYSTEMS
Tech Data Sheet: G590
L1
L2
B.O.D.
Nominal
Size
Inches
mm
B.O.D.
Inches
mm
Max.
Pressure
Rating
psi bar
L1
Inches
mm
L2
Inches
mm
Approx.
Weight
Lbs.
Kg
2
50
3
80
4
100
6
150
8
200
3.20
81,3
4.375
111,1
5.47
138,9
7.84
199,1
10.19
258,8
250
17,2
250
17,2
250
17,2
250
17,2
250
17,2
5.50
139,7
8.00
203,2
9.00
228,6
9.00
228,6
10.125
257,3
2.375
60,5
3.50
88,9
4.00
101,6
4.00
101,6
4.50
114,3
1.00
0,5
2.20
1,0
3.50
1,6
6.40
2,9
11.30
5,1
G-MINE Gasket O-ring and Spline included.
See G-MINE specifications on page 177.
180
www.grinnell.com
G-MINE PVC SYSTEMS
Figure 72919 Reducing Couplings
(Male Spline x Female Spline)
Tech Data Sheet: G590
Nominal
Size
Inches
mm
O.D.
Inches
mm
B.O.D.
Inches
mm
Max.
Pressure
Rating
psi bar
L
Inches
mm
Approx.
Weight
Lbs.
Kg
4x2
100 x 50
4x3
100 x 80
6x2
150 x 50
6x3
150 x 80
6x4
150 x 100
8x2
200 x 50
8x4
200 x 100
8x6
200 x 150
2.375
60,3
3.50
88,9
2.375
60,3
3.50
88,9
4.50
114,3
2.375
60,3
4.50
114,3
6.625
168,3
5.47
139
5.47
139
7.84
199
7.84
199
7.84
199
10.19
259
10.19
259
10.19
259
250
17,2
250
17,2
250
17,2
250
17,2
250
17,2
250
17,2
250
17,2
250
17,2
15.25
387,4
16.56
420,6
15.75
400,1
16.50
419,1
17.38
441,5
17.00
431,8
15.63
397,0
18.50
469,9
5.00
2,3
5.70
2,6
10.40
4,7
11.00
5,0
11.10
5,0
11.10
5,0
24.10
10,9
24.60
11,2
G-MINE Gasket (O-ring) and Spline included.
See G-MINE specifications on page 177.
The GRINNELL Figure 72919 G-MINE Reducing
Coupling (Female x Male) allows for a direct
transition between two different pipe sizes.
L
O.D.
B.O.D.
Figure 72940 Outlet Couplings
(Male Spline x Female Spline x Female Thread)
Tech Data Sheet: G590
O.D.
Inches
mm
B.O.D.
Inches
mm
2 x 3 ⁄4
2.375
3.20
50 x 20
60,3
81
2x1
2.375
3.20
50 x 25
60,3
81
1
Max.
Pressure
Rating
psi bar
L
Inches
mm
Approx.
Weight
Lbs.
Kg
250
10.13
1.60
17,2
257,3
0,7
250
10.13
1.50
17,2
257,3
0,7
3.60
3 x 1 ⁄2
3.50
4.375
250
13.50
80 x 40
88,9
111
17,2
342,9
1,6
4 x 11 ⁄ 2
4.50
5.47
250
15.00
5.80
100 x 40
114,3
139
17,2
381,0
2,6
11.50
1
6 x 1 ⁄2
6.625
7.84
250
17.00
150 x 40
168,3
199
17,2
431,8
5,2
6x2
6.625
7.84
250
17.00
11.40
150 x 50
168,3
199
17,2
431,8
5,2
8.625
10.19
250
19.00
20.60
1
8 x 1 ⁄2
200 x 40
219,1
259
17,2
482,6
9,3
8x2
8.625
10.19
250
19.00
21.40
200 x 50
219,1
259
17,2
482,6
9,7
The GRINNELL Figure 72940 G-MINE Threaded Outlet
Coupling (Female x Male x Female NPT) provides a
threaded branch outlet connection.
G-MINE PVC SYSTEMS
Nominal Size
Run x Outlet
Inches x NPT
L1
NPT
B.O.D.
O.D.
G-MINE Gasket (O-ring) and Spline included.
See G-MINE specifications on page 177.
Refer to back cover for country-specific customer care numbers.
181
G-MINE PVC SYSTEMS
Figure 72930 Outlet Couplings
(Spline x Spline x Female Thread)
Tech Data Sheet: G590
The GRINNELL Figure 72930 G-MINE Threaded Outlet
Coupling (Female x Female x Female NPT) provides a
connection between two pieces of G-MINE PVC Pipe and
includes a threaded branch connection.
L
NPT
B.O.D.
Nominal Size
Run x Outlet
Inches x NPT
B.O.D.
Inches
mm
2 x 3 ⁄4
50 x 20
2x1
50 x 25
3 x 3 ⁄4
80 x 20
3x1
80 x 25
3 x 11 ⁄ 2
80 x 40
4 x 3 ⁄4
3.20
81
3.20
81
4.375
111
4.375
111
4.375
111
5.47
Max.
Pressure
Rating
psi bar
200
13,8
200
13,8
200
13,8
200
13,8
160
11,0
200
100 x 20
139
13,8
266,7
1,9
4x1
100 x 25
4 x 11 ⁄ 2
5.47
139
5.47
200
13,8
160
10.50
266,7
10.50
4.10
1,9
4.00
100 x 40
139
11,0
266,7
1,8
6 x 3 ⁄4
150 x 20
6x1
150 x 25
6 x 11 ⁄ 2
150 x 40
8x1
200 x 25
8 x 11 ⁄ 2
200 x 40
7.84
199
7.84
199
7.84
199
10.19
259
10.19
259
200
13,8
200
13,8
200
13,8
200
13,8
200
13,8
11.25
285,8
11.25
285,8
11.25
285,8
12.50
317,5
12.50
317,5
7.90
3,6
7.90
3,6
7.90
3,6
15.00
6,8
15.00
6,8
L
Inches
mm
7.00
177,8
7.00
177,8
9.50
241,3
9.50
241,3
9.50
241,3
10.50
Approx.
Weight
Lbs.
Kg
1.50
0,7
1.40
0,6
2.60
1,2
2.90
1,3
2.70
1,2
4.10
G-MINE PVC SYSTEMS
G-MINE Gaskets (O-rings) and Splines included.
See G-MINE specifications on page 177.
Figure 72906 Nipples
The GRINNELL Figure 72906 G-MINE Nipple (Male x Plain-End)
provides an economical and efficient method of converting a solvent
weld-end pipe run to a G-MINE grooved connection.
(Spline x Plain End)
Tech Data Sheet: G590
L
O.D.
Nominal
Size
Inches
mm
2
50
3
80
4
100
6
150
8
200
O.D.
Inches
mm
2.375
60,3
3.50
88,9
4.50
114,3
6.625
168,3
8.625
219,1
Max.
Pressure
Rating
psi bar
250
17,2
250
17,2
250
17,2
250
17,2
250
17,2
L
Inches
mm
7.00
177,8
9.00
228,6
10.00
254,0
12.00
304,8
13.00
330,2
Approx.
Weight
Lbs.
Kg
0.60
0,3
1.40
0,6
2.30
1,0
5.20
2,4
9.70
4,4
See G-MINE specifications on page 177.
182
www.grinnell.com
G-MINE PVC SYSTEMS
Figure 72907 Nipples
(Spline x Groove)
The GRINNELL Figure 72907 G-MINE Transition Coupling (G-MINE
x Grooved) provides an efficient transition from G-MINE PVC Pipe to
grooved steel pipe that meets AWWA C-606 IPS Groove Standards.
Nominal
Size
Inches
mm
2
50
3
80
4
100
4H
100
6
150
6H
150
8
200
O.D.
Inches
mm
2.375
60,3
3.50
88,9
4.50
114,3
4.50
114,3
6.625
168,3
6.625
168,3
8.625
219,1
Max.
Pressure
Rating
psi bar
250
17,2
250
17,2
250
17,2
250
17,2
250
17,2
250
17,2
250
17,2
L
Inches
mm
7.00
177,8
9.00
228,6
10.00
254,0
10.00
254,0
12.00
304,8
12.00
304,8
13.50
342,9
Approx.
Weight
Lbs.
Kg
0.60
0,3
1.60
0,7
2.50
1,1
3.10
1,4
5.20
2,4
7.20
3,3
9.00
4,1
Tech Data Sheet: G590
L
O.D.
Requires thrust blocking to eliminate end loads; use only with
GRINNELL Flexible Couplings only.
See G-MINE specifications on page 177.
Figure 72908 Nipples
The GRINNELL Figure 72908 G-MINE Threaded Nipple (Male x Male
NPT) provides an economical and efficient method of connecting a
G-MINE piping system to a female threaded adapter or device.
O.D.
Inches
mm
2.375
60,3
3.50
88,9
4.50
114,3
6.625
168,3
8.625
219,1
Max.
Pressure
Rating
psi bar
200
13,8
190
13,1
160
11,0
140
9,7
120
8,3
L
Inches
mm
7.00
177,8
9.00
228,6
10.00
254,0
12.00
304,8
13.00
330,2
Approx.
Weight
Lbs.
Kg
0.60
0,3
1.30
0,6
2.40
1,1
5.20
2,4
9.00
4,1
Tech Data Sheet: G590
G-MINE PVC SYSTEMS
Nominal
Size
Inches
mm
2
50
3
80
4
100
6
150
8
200
(Spline x Male Thread)
L
O.D.
See G-MINE specifications on page 177.
Refer to back cover for country-specific customer care numbers.
183
G-MINE PVC SYSTEMS
Figure 72909 Nipples
(Plain End x Male Thread)
The GRINNELL Figure 72909 G-MINE Threaded Nipple (Plainend x Male NPT) provides an economical and efficient method
of connecting a solvent weld-end pipe run to a female threaded
adapter or device.
Tech Data Sheet: G590
L
O.D.
Nominal
Size
Inches
mm
2
50
3
80
4
100
6
O.D.
Inches
mm
2.375
60,3
3.50
88,9
4.50
114,3
6.625
Max.
Pressure
Rating
psi bar
200
13,8
190
13,1
160
11,0
140
L
Inches
mm
5.25
133,4
6.50
165,1
7.00
177,8
9.00
Approx.
Weight
Lbs.
Kg
0.60
0,3
1.25
0,6
2.50
1,1
5.70
150
168,3
9,7
228,6
2,6
8
200
8.625
219,1
120
8,3
9.80
248,9
10.25
4,7
See G-MINE specifications on page 177.
Figure 72911 Nipples
(Spline x Spline)
The GRINNELL Figure 72911 G-MINE Nipple (Male x Male)
provides an economical and efficient method of connecting two
female G-MINE components.
G-MINE PVC SYSTEMS
Tech Data Sheet: G590
L
O.D.
Nominal
Size
Inches
mm
4
100
6
150
8
200
O.D.
Inches
mm
4.50
114,3
6.625
168,3
8.625
219,1
Max.
Pressure
Rating
psi bar
250
17,2
250
17,2
250
17,2
L
Inches
mm
10.00
254,0
12.00
304,8
13.00
330,2
Approx.
Weight
Lbs.
Kg
2.30
1,0
5.20
2,4
9.70
4,4
See G-MINE specifications on page 177.
184
www.grinnell.com
G-MINE PVC SYSTEMS
Figure 72910 90° Elbows
(Spline x Spline)
The GRINNELL Figure 72910 G-MINE 90° Degree Elbow (Male
x Male) provides an economical and efficient method of changing
pipe direction.
Nominal
Size
Inches
mm
2
50
3
80
4
100
6
150
8
200
O.D.
Inches
mm
2.375
60,3
3.50
88,9
4.50
114,3
6.625
168,3
8.625
219,1
Max.
Pressure
Rating
psi bar
250
17,2
250
17,2
250
17,2
250
17,2
250
17,2
L
Inches
mm
8.00
203,2
10.18
258,6
12.375
314,5
15.625
397,0
18.00
457,2
Tech Data Sheet: G590
Approx.
Weight
Lbs.
Kg
1.70
0,8
4.10
1,9
7.50
3,4
17.40
7,9
33.70
15,3
L
L
See G-MINE specifications on page 177.
O.D.
Figure 72912 45° Elbows
(Spline x Spline)
The GRINNELL Figure 72912 G-MINE 45° Degree Elbow (Male
x Male) provides an economical and efficient method of changing
pipe direction.
O.D.
Inches
mm
2.375
60,3
3.50
88,9
4.50
114,3
6.625
168,3
8.625
219,1
Max.
Pressure
Rating
psi bar
250
17,2
250
17,2
250
17,2
250
17,2
250
17,2
L
Inches
mm
7.75
196,9
9.75
247,7
11.25
285,8
13.00
330,2
15.00
381,0
Approx.
Weight
Lbs.
Kg
1.60
0,7
3.90
1,8
7.10
3,2
16.10
7,3
30.90
14,0
G-MINE PVC SYSTEMS
Nominal
Size
Inches
mm
2
50
3
80
4
100
6
150
8
200
Tech Data Sheet: G590
L
L
O.D.
See G-MINE specifications on page 177.
Refer to back cover for country-specific customer care numbers.
185
G-MINE PVC SYSTEMS
Figure 72913 90° Sweep Elbows
(Spline x Spline)
The GRINNELL Figure 72913 G-MINE 90° Degree Sweep
Elbow provides an economical and efficient method of
changing pipe direction.
Tech Data Sheet: G590
W
Nominal
Size
Inches
mm
2
50
3
80
4
100
4H
100
6
150
6H
150
8
200
90°
L
O.D.
O.D.
Inches
mm
2.375
60,3
3.50
88,9
4.50
114,3
4.50
114,3
6.625
168,3
6.625
168,3
8.625
219,1
Max.
Pressure
Rating
psi bar
250
17,2
250
17,2
250
17,2
315
21,7
250
17,2
315
21,7
250
17,2
L
Inches
mm
W
Inches
mm
16.06
408
23.125
587,4
30.25
408,0
30.25
768,4
42.00
1066,8
42.00
1066,8
46.625
1184,3
16.06
408
23.125
587,4
30.25
408,0
30.25
768,4
42.00
1066,8
42.00
1066,8
46.625
1184,3
Approx.
Weight
Lbs.
Kg
2.40
1,1
6.40
2,9
12.70
5,8
14.90
6,8
31.00
14,1
45.30
20,6
59.00
26,8
See G-MINE specifications on page 177.
Figure 72914 45° Sweep Elbows
(Spline x Spline)
The GRINNELL Figure 72914 G-MINE 45° Degree Sweep
Elbow provides an economical and efficient method of
changing pipe direction.
G-MINE PVC SYSTEMS
Tech Data Sheet: G590
W
45°
L
O.D.
186
Nominal
Size
Inches
mm
2
50
3
80
4
100
4H
100
6
150
6H
150
8
200
O.D.
Inches
mm
2.375
60,3
3.50
88,9
4.50
114,3
4.50
114,3
6.625
168,3
6.625
168,3
8.625
219,1
Max.
Pressure
Rating
psi bar
250
17,2
250
17,2
250
17,2
315
21,7
250
17,2
315
21,7
250
17,2
L
Inches
mm
W
Inches
mm
18.125
460,4
25.69
652,5
28.75
730,3
28.75
730,3
39.19
995,4
39.19
995,4
52.00
1320,8
7.50
190,5
10.75
273,1
11.875
301,6
11.875
301,6
16.25
412,8
16.25
412,8
21.57
547,7
Approx.
Weight
Lbs.
Kg
2.00
0,9
4.90
2,2
7.50
3,4
11.60
5,3
18.30
8,3
26.20
11,9
35.00
15,9
See G-MINE specifications on page 177.
www.grinnell.com
G-MINE PVC SYSTEMS
Figure 72915 Caps & Plugs
(Spline)
Tech Data Sheet: G590
Figure 72915 End Plug
Nominal
Size
Inches
mm
O.D.
Inches
mm
Max.
Pressure
Rating
psi bar
L
Inches
mm
Approx.
Weight
Lbs.
Kg
2
50
3
80
2.375
60
3.50
89
250
17,2
250
17,2
7.50
190,5
10.00
254,0
0.90
0,4
2.00
0,9
The GRINNELL Figure 72915 G-MINE End Plug and End Cap provide
an economical and efficient method of capping a piping system.
Figure 72915
End Plug (Male Spline)
L
Nominal
Size
Inches
mm
4
100
6
150
8
200
Figure 72915 End Cap*
Max.
B.O.D.
L
Pressure
Inches
Inches
Rating
mm
mm
psi bar
5.47
250
9.00
139
17,2
228,6
7.84
250
9.00
199
17,2
228,6
10.19
250
10.125
259
17,2
257,3
O.D.
Approx.
Weight
Lbs.
Kg
4.20
1,9
9.00
4,1
17.00
7,7
Figure 72915
End Cap (Female Spline)
L
B.O.D.
* G-MINE Gasket (O-ring) and Spline included.
See G-MINE specifications on page 177.
Figure 72916 Flange Adapters
The GRINNELL Figure 72916 G-MINE Flange Adapter provides a
direct transition from flanged components to G-MINE PVC piping
components.
Outlet 1
O.D.
Inches
mm
2
50
3
80
4
100
6
150
8
200
2.375
60,3
3.50
88,9
4.50
114,3
6.625
168,3
8.625
219,1
Max.
L
Pressure
Inches
Rating
mm
psi bar
150
10,3
150
10,3
150
10,3
150
10,3
150
10,3
7.19
182,6
9.25
235,0
10.25
260,4
12.44
316
13.38
339,9
Flange 2
O.D.
Inches
mm
R
Inches
mm
6.00
152,4
7.50
190,5
9.00
228,6
11.00
279,4
13.50
342,9
0.81
20,6
1.06
26,9
1.125
28,7
1.28
32,5
1.375
35,1
Bolt
Circle
Diameter
Inches
mm
4.75
120,7
6.00
152,4
7.50
190,5
9.50
241,3
11.75
298,5
Tech Data Sheet: G590
Bolt
Size
Bolt
Holes
5
/8
4
5
/8
4
5
/8
8
3
/4
8
3
/4
8
All flanges are Van Stone style with glass-filled PVC ring.
ANSI Class 125 and 150 bolt pattern.
See G-MINE specifications on page 177.
Refer to back cover for country-specific customer care numbers.
G-MINE PVC SYSTEMS
Nominal
Size
Inches
mm
(Spline x Flange 150psi)
Approx.
Weight
Lbs.
Kg
1.6
0,7
3.2
1,5
5.0
2,3
9.0
4,1
16.0
7,3
L
R
O.D. 1
O.D. 2
BOLT
SIZE
A
187
G-MINE PVC SYSTEMS
Figure 72917 Tees
(Spline x Spline x Spline)
The GRINNELL Figure 72917 G-MINE Tee (Male) provides an
economical and efficient method of adding a G-MINE PVC Branch
Run to a piping system.
Tech Data Sheet: G590
O.D.
F
O.D.
L
Nominal
Size
Inches
mm
2
50
3
80
4
100
6
150
8
200
O.D.
Inches
mm
2.375
60,3
3.50
88,9
4.50
114,3
6.625
168,3
8.625
219,1
Max.
Pressure
Rating
psi bar
250
17,2
250
17,2
250
17,2
250
17,2
250
17,2
L
Inches
mm
F
Inches
mm
16.50
419,1
21.50
546,1
24.75
628,7
31.00
787,4
36.25
920,8
10.875
276,4
11.25
280,0
12.375
314,5
15.50
393,7
17.75
450,9
Approx.
Weight
Lbs.
Kg
2.30
1,0
5.80
2,6
10.70
4,9
25.00
11,3
48.00
21,8
See G-MINE specifications on page 177.
Figure 72918 Reducing Tees
The GRINNELL Figure 72918 G-MINE Reducing Tee (Male) provides
an economical and efficient method of adding a reduced diameter
G-MINE PVC Branch Run to a piping system.
(Spline x Spline x Spline)
G-MINE PVC SYSTEMS
Tech Data Sheet: G590
O.D.2
F
O.D.1
L
Nominal Size
Run x Run
x Branch
Inches
mm
3x2
80 x 50
4x2
100 x 50
4x3
100 x 80
6x2
150 x 50
6x3
150 x 80
6x4
150 x 100
8x6
200 x 150
Run
O.D. 1
Inches
mm
Outlet
O.D. 2
Inches
mm
Max.
Pressure
Rating
psi bar
L
Inches
mm
F
Inches
mm
Approx.
Weight
Lbs.
Kg
3.50
88,9
4.50
114,3
4.50
114,3
6.625
168,3
6.625
168,3
6.625
168,3
8.625
219,1
2.375
60,3
2.375
60,3
3.50
88,9
2.375
60,3
3.50
88,9
4.50
114,3
6.625
168,3
250
17,2
250
17,2
250
17,2
250
17,2
250
17,2
250
17,2
250
17,2
21.00
533,4
22.875
581,2
24.19
614,4
28.125
714,5
28.125
714,5
29.19
741,4
33.50
850,9
8.84
224,5
9.47
240,5
11.66
296,2
11.75
298,5
12.75
323,9
13.75
349,3
16.81
427,0
5.00
2,3
10.10
4,6
10.80
4,9
22.83
10,4
24.20
11,0
24.40
11,1
50.90
23,1
See G-MINE specifications on page 177.
188
www.grinnell.com
G-MINE PVC SYSTEMS
Model B8200L G-MINE Butterfly Valves
(Spline x Spline)
Tech Data Sheet: G592
MATERIAL SPECIFICATIONS
GRINNELL Model B8200 Butterfly Valves are designed for use
with the G-MINE PVC Piping System. Available sizes include
2" to 6" (50 to 150mm) diameters. Precision machined
grooves in the valve body provide easy alignment of the valve
and G-MINE Coupling, allowing for the insertion of the spline
to connect the GRINNELL Model B8200 Valve to the G-MINE
PVC System. Flow may enter the valve from either direction
and valve can be orientated in any direction.
Maximum Working Pressure
• 320 psi (22,1 bar)
Working Temperature Range
• 32°F to 140°F (0°C to 60°C)
Body
• Ductile iron conforming to ASTM A 536, Grade 65-45-12
Body Coating
• Black epoxy-coated
Disc
• Ductile iron conforming to ASTM A 536, Grade 65-45-12
Disc Seal
A
• Grade “T” Nitrile encapsulated rubber
HANDLE
Stem
STEM
SEALS
Stem Seal
STEM
B
G-MINE PVC SYSTEMS
• Two-piece Type 316 Stainless Steel Splines
DISC
• EPDM O-rings, upper and lower stem
O.D.
Handle
• Zinc-plated carbon steel
DISC
SEAL
T/O
Nominal Pipe Size
ANSI
O.D.
Inches
Inches
mm
mm
2
2.375
50
60,3
3
3.500
80
88,9
4
4.500
100
114,3
6
6.625
150
168,3
Dimensions Inches mm
A
B
L
7.95
202,0
7.95
202,0
7.95
202,0
10.28
261,0
5.16
131,0
5.75
146,0
7.05
179,0
8.39
213,1
7.50
191,1
9.18
233,2
10.18
258,6
10.41
264,6
Approx.
Weight
Lbs
kg
L
BODY
8.8
4,0
17.6
8,0
26.4
12,0
50.6
23,0
See G-MINE specifications on page 177.
Refer to back cover for country-specific customer care numbers.
189
G-MINE PVC SYSTEMS
Figure 72999 Splines
Tech Data Sheet: G590
The GRINNELL Figure 72999 G-MINE Spline securely locks the
coupling or fitting to the pipe. The spline is made of Nylon and
is also available in Acid-Resistant Polypropylene.
&6
',$
/
,16(57,21(1'
Nominal Size
Inches
mm
L
Inches
mm
2
50
3
80
4
100
4H
100
6
150
6H
150
8
200
10.50
266,7
16.00
406,4
18.00
457,2
18.00
457,2
24.00
609,6
24.00
609,6
32.00
812,8
Cross Section
Diameter C.S.
Inches
mm
0.19
4,8
0.25
6,4
0.25
6,4
0.25
6,4
0.25
6,4
0.25
6,4
0.31
8,0
Configuration
ROUND
ROUND
ROUND
SQUARE
ROUND
SQUARE
SQUARE
See G-MINE specifications on page 177.
Figure ITGM Insertion Tools
Tech Data Sheet: G590
63/,1(
127,1&/8'('
:,7+722/
3/81*(5
+$1'/(
The GRINNELL Figure ITGM G-MINE Spline Insertion Tool assists with
the insertion of the spline into the groove, locking the fitting to the pipe.
)/$1*( %$55(/
Nominal Size
Inches
mm
32,17('
,16(57,21(1'
2)63/,1(
3-6
80 - 150
8
200
/2$'63/,1(
,172%$55(/
Part Number
ITGM 36
ITGM 8
G-MINE PVC SYSTEMS
See G-MINE specifications on page 177.
Figure 72899 Replacement Gaskets
Tech Data Sheet: G590
The GRINNELL Figure 72899 G-MINE Gasket (O-ring)
provides a hydraulic seal. Most G-MINE Fittings and Couplings
are manufactured to include an O-ring, a flexible elastomeric
seal. G-MINE O-rings are Teflon-coated, Nitrile Butadiene
Rubber (NBR) or Polyisoprene Rubber conforming to ASTM F
477 (Solvent weld and plain end fittings are designed for use
without o-ring).
O.D.
* Registered trademark of Dupont.
190
C.S.
DIA.
Nominal
Size
Inches
mm
O.D.
Inches
mm
2
50
3
80
4
100
6
150
8
200
2.770
70,4
3.895
98,9
4.895
124,3
7.176
182,3
9.350
237,5
Cross
Section
Diameter C.S.
Inches
mm
0.210
5,3
0.210
5,3
0.210
5,3
0.275
7,0
0.375
9,5
Material
Teflon*-Coated
Nitrile Butadiene
Rubber
Nitrile Butadiene
Rubber
Nitrile Butadiene
Rubber
Nitrile Butadiene
Rubber
Polyisoprene
Rubber
See G-MINE specifications on page 177.
www.grinnell.com
191
GASKETS
GRINNELL Gasket Types
Tech Data Sheet: G610
Pressure responsive gaskets are offered in a variety of types.
Although they each serve a specific function they all utilize the
same sealing design.
The GRINNELL gasket is designed to provide a three-way
sealing action.
(1) Installation of the gasket over the outside sealing surface of
the pipe compresses the lip seal and forms the initial seal.
(2) The installation of the housing segments around the gasket
and into the pipe groove properly positions the gasket.
Tightening of the housing segments forms the gasket to the
inside of the housing and compresses it around the pipesealing surface thus increasing the gasket’s sealing against
the pipe.
(3) The introduction of the system pressure energizes the
pressure responsive seal of the gasket and further
enhances the sealing action.
First Seal
C-shaped rubber gasket seals
on pipe ends.
Second Seal
The housings compress the
gasket to increase the sealing
capacity.
Third Seal
GASKETS
The system pressure or vacuum will
then maximize the leak-tight seal.
)RUDGGLWLRQDOOLVWLQJVRU
DSSURYDOVVHHSDJHRU
YLVLWRXUZHEVLWHDW
ZZZJULQQHOOFRP
192
www.grinnell.com
GASKETS
Gasket Styles
Tech Data Sheet: G610
Standard
The standard style gasket, with a “C” shape configuration, is the most commonly
used. It is provided as the standard gasket in the Figure 705, 707, 770, 772, 405,
and 472 GRINNELL Couplings. The gasket is available in Grade “E” and “EN”
EPDM, Grade “T” Nitrile, Grade “L” Silicone, and Grade “O” Fluoroelastomer.
Tri-Seal
The tri-seal gasket is designed to close off the gap or gasket cavity. This is
accomplished by positioning the center “rib” of the gasket over the gap between the
pipes. The tri-seal gasket has two tapered sealing edges in addition to the center rib
for additional strength and sealing.
The Tri-Seal gasket can be used with the Figure 705, 707, 770, 772, 672, 405, and
472 GRINNELL Couplings. It is recommended for use in low temperature and vacuum
services (greater than 10" Hg (250mm Hg)) applications and potable water systems.
Note only a petroleum-free silicone based lubricant is recommended for low temperature
applications. The gasket is available in Grade “E”, “EN” EPDM, and Grade “T” Nitrile.
Note: Rigid couplings are recommended for vacuum and low temperature applications.
Center-Stop, Push-On
The Grade “EHT” EPDM Center-Stop, Push-On Style Gasket is specially designed for
easy installation of the GRINNELL Figure 640 Pivot-Bolt Coupling.
Reducing Coupling
The reducing gasket is provided with ribs used to position the larger pipe so that the
sealing lip is located on the sealing surface of the pipe. This gasket is used only with
the Figure 716 GRINNELL Reducing Coupling and is available in Grade “E” EPDM
and Grade “T” Nitrile.
Reducing couplings are not recommended for low temperature applications.
Flange Adapter
This gasket is specifically designed for use with the Figure 61 and 71 Flange
Adapter. The gasket has an optimum amount of rubber to provide a dependable seal
between both the pipe and mating surface. The gasket is available in Grade “E”
EPDM and Grade “T” Nitrile.
Mechanical Tee and Strap
GASKETS
The gasket provides a compression type seal, which is designed to conform to
the exterior curve (OD) of the pipe. This design is unique to both the Figure 730
Mechanical Tee (threaded and grooved) and Figure 40-5 Strap. The gasket is
available in Grade “E” EPDM and Grade “T” Nitrile.
Note: When used in low temperature applications, use a petroleum-free silicone based lubricant,
otherwise no lubricant is required on Mechanical Tee and Strap gaskets.
Outlet Coupling
This gasket is specifically designed for use with the GRINNELL Figure 702 Outlet
Coupling.
Plain End Coupling
This gasket is designed for use with the Figure 909 Plain End Coupling.
GRINNELL gaskets are designed exclusively for use with GRINNELL manufactured coupling housings. The mixing of other
manufacturer’s gaskets or housings with GRINNELL gaskets or housings may result in pipe joint leakage or failure and will void the
GRINNELL Mechanical Products Limited Warranty.
Refer to back cover for country-specific customer care numbers.
193
GASKETS
GRINNELL Gasket Grade & Recommendations
Tech Data Sheet: G610
The Gasket Recommendation Table has been developed to
assure maximum service life. The table was developed from
information supplied by the material manufacturers of the
elastomer, technical reference literature, and testing conducted
by GRINNELL Mechanical Products.
In evaluating the gasket grade for intended service
applications the following consideration must be reviewed:
system operating temperature, fluid or solution concentration,
and duration of service.
All gasket recommendations are based on a temperature of
70°F (21°C) unless otherwise noted.
Technical and Engineering Services should be consulted if
combinations of service solutions are being considered.
Middle East email: Mechserv-EMEA@GRINNELL.com
U.S.A.: Phone 866-500-4768 or 1-401-781-8220
Contact GRINNELL Mechanical Products for recommendations
for services not listed.
Gasket recommendations apply to GRINNELL gaskets and
valves only.
Grade
Compound
Color
Code
General
Service Application
Green
Hot water, dilute acids, alkalies, oil free air, and many
chemical services not involving petroleum products.
Excellent oxidation resistance.
Not for use with hydrocarbons.
Not recommended for steam service.
EPDM
Green
Hot water, dilute acids, alkalies, and many chemical
services not involving petroleum products.
Excellent oxidation resistance.
Not for use with hydrocarbons.
Recommended for low temperature and vacuum services.
Potable Water
up to 180°F (82°C)
EPDM
Green/Yellow
Stripe
IPS Sizes Only,
NSF 61 Approved for potable water.
Not recommended for hydrocarbons.
Potable Water
up to 180°F (82°C)
EPDM
Copper
CTS Sizes Only,
NSF 61 Approved for potable water.
Not recommended for hydrocarbons.
“E”
-30°F to 230°F
(-34°C to 110°C)
“E”
Tri- Seal
-30°F to 230°F
(-34°C to 110°C)
“EN” and
“EN” Tri-Seal
for IPS Pipe
“EN” Tri-Seal for
Copper Tubing
“EHT” CenterStop
Push-On Style
Copper Tubing
GASKETS
Temperature
Range
For closed-loop
heating systems
-30°F to 250°F
(-34°C to 120°C)
EPDM
EPDM
Potable Water up to
180°F (82°C)
Red and
Copper
Striped
“T” and
“T” Tri- Seal
-20°F to 180°F
(-29°C to 82°C)
Nitrile
Orange
“O” and
“O” Tri- Seal
+20°F to 300°F
(-7°C to 149°C)
Fluoroelastomer
Blue
“L”
-30°F to 350°F
(-34°C to 177°C)
Silicone *
Red Gasket
CTS Sizes Only,
NSF 61 Approved for potable water.
Recommended for use in low temperature and vacuum
systems
Not recommended for hydrocarbons.
Compressed air, petroleum products, vegetable oils,
mineral oils, and air with oils.
High-End oil vapor temperature, decrease to 150°F (66°C).
Not recommended for hot water systems.
Not recommended for hot dry air systems.
Oxidizing acids, petroleum products, hydraulic fluids,
lubricants, halogenated hydrocarbons.
Air without hydrocarbons, dry heat.
* To prevent gasket from deteriorating, NEVER use silicone-based lubricants with Grade “L” Silicone gaskets.
For local country potable water approvals contact GRINNELL Mechanical Products.
194
www.grinnell.com
GASKETS
Gasket Air, Water & Chemical Recommendations
(Page 1 of 3)
Tech Data Sheet: G610
• Specify gasket grade when ordering.
• For vacuum or low temperature systems, use tri-seal
gasket. For low temperature applications, use a
petroleum-free silicone lubricant.
• Gasket Grade "EHT" can be used where "E" is marked.
Service
• Check gasket color code to be certain it is recommended
for the service intended.
• Unless otherwise noted, all gasket listings are based upon
a temperature of 70°F (21°C).
• For services not listed, contact GRINNELL Mechanical
Products for recommendation.
• Where more than one gasket is shown, the preferred
gasket grade is listed first.
Gasket Grade
Air, (no oil vapors) Temp. -30°F to 230°F (-34°C to 110°C)
Air, Oil Vapor Temp. -20°F to 150°F (-29°C to 66°C)
Water, Temp. to 230°F (110°C)
(NOT RECOMMENDED FOR STEAM SERVICE)
Water, Acid Mine
Water, Chlorine
Water, Deionized
Water, Seawater
Water, Waste (NO PETROLEUM PRODUCTS)
Chemical
Gasket
Composition
Grade
ASTM #3 Oil
T
Acetaldehyde
E
Acetamide
T
Acetic Acid up to
E
10% 100°C/38°C
Acetic Acid up to 10L
50% 100°C/38°C
Acetic Acid, Glacial
L
100°C/38°C
Acetic Anhydride
E
Acetone
E
Acetonitrile
T
Acetylene
E/T
Adipic Acid
T
Alkalis
E
Allyl Alcohol to 96%
E
Alum Sulfuric Acid
O
Alums
E/T
Aluminum Chloride
E/T
Aluminum Fluoride
E/T
Aluminum Hydroxide
E
Aluminum Nitrate
E/T
Aluminum
T
Oxychloride
Aluminum
E
Phosphate
Aluminum Salts
T
Aluminum Sulfate
E/T
Ammonia Gas, Cold
E
Ammonia, Liquid
E
Ammonium
T
Bifluoride
Ammonium
E
Carbonate
Chemical
Gasket
Composition
Grade
Ammonium Chloride
E/T
Ammonium Fluoride
E
Ammonium
E
Hydroxide
Ammonium
E
Metaphosphate
Ammonium Nitrate
T
Ammonium Nitrite
E
Ammonium
E
Persulfate, to 10%
Ammonium
T
Phosphate
Ammonium
T
Sulfamate
Ammonium Sulfate
E/T
Ammonium Sulfide
E
Ammonium
E
Thiocyanate
Amyl Acetate
E
Amyl Alcohol
E
Amyl
T
Chloronaphthalene
Anderol
O
Aniline
E
Aniline Dyes
E
Aniline
E
Hydrochloride
Aniline Oil
E
Antimony Chloride
E
Antimony Trichloride
E
Argon Gas
E/O
Aroclor(S)
O
Arsenic Acid, to 75%
T
Barium Carbonate
E
E
T
E
E/T
E
E
E
E
Chemical
Composition
Barium Chloride
Barium Hydroxide
Barium Sulfide
Benzaldehyde
Benzene
Benzine (see
Petroleum Ether)
Benzoic Acid
Benzol
Benzyl Alcohol
Benzyl Benzoate
Black Sulfate Liquor
Blast Furnace Gas
Bleach,12% Active
Borax Solutions
Bordeaux Mixture
Boric Acid
Bromine
Butane Gas
Butanol
(see Butyl Alcohol)
Butyl Acetate
Ricinoleate
Butyl Alcohol
Butyl
“Cellosolve Adipate”
Butyl Phenol
Butyl Stearate
Butylene
Butylene Glycol
Calcium Acetate
Calcium Bisulphite
Calcium Chloride
Calcium Hydroxide
Refer to back cover for country-specific customer care numbers.
Gasket
Grade
E/T
E/T
T
E
O
O
E
O
E
E
T
T
E
E
E
E/T
O
T
E/T
E
E/T
E/T
E
T
T
E
T
T
E/T
E/T
Chemical
Gasket
Composition
Grade
Calcium
E
Hypochlorite
Calcium
E
Hypochloride
Calcium Nitrate
E/T
Calcium Sulfate
E/T
Calcium Sulfide
E/T
Caliche Liquors
T
Carbitol
E/T
Carbonic Acid,
O
Phenol
Carbon Bisulfide
O
Carbon Dioxide, Dry
E/T
Carbon Dioxide, Wet
E/T
Carbon Disulfide
O
Carbon Monoxide
E
Carbon Tetrachloride
O
Caustic Potash
E/T
Cellosolve Acetate
E
Cellosolve
E
(Alcohol Ether)
Cellulose Acetate
E
Cellulube 220
E
(Tri-Aryl-Phosphate)
Cellulube Hydraulic
E
Fluids
China Wood Oil,
T
Tung Oil
Chloric Acid to 20%
E
Chlorine, Dry
O
Chlorine, Water 4000
E
PPM (max.)
Chlorinated Paraffin
T
(Chlorocosane)
Chloroacetic Acid
E
GASKETS
• Contact GRINNELL Mechanical Products for an
engineering evaluation and recommendation where the
gasket grade is shown in parenthesis.
195
GASKETS
Gasket Air, Water & Chemical Recommendations
(Page 2 of 3)
Tech Data Sheet: G610
GASKETS
Chemical
Composition
Chloroacetone
Chlorobenzene
Chloroform
Chrome Alum
Chrome Plating
Solutions
Chromic Acid, to
25%
Citric Acid
Coke Oven Gas
Copper Chloride
Copper Cyanide
Copper Fluoride
Copper Nitrate
Copper Sulfate
Creosol, Cresylic
Acid
Creosote, Coal Tar
Creosote, Wood
Cupric Fluoride
Cupric Sulfate
Cyclohexane
(Alicyclic
Hydrocarbon)
Cyclohexanone
Deionized Water
Dextrim
Dibutyl Phthalate
Dichloro Difloro
Methane
Dicyclohexylamine
Diesel Oil
Diethyl Ether
Diethyl Sebacate
Diethylamine
Diethylene Glycol
Digester Gas
Dimethylamine
Dioctyl Phthalate
Dioxane
Dipentene
(TerpeneHydrocarbon)
Dipropylene Glycol
Dowtherm A
Dowtherm E
Dowtherm SR-1
Ethane
Ethanolamine
Ethyl Acetoacetate
Ethyl Acrylate
Ethyl Alcohol
Ethyl Cellulose
Ethyl “Cellusolve”
Ethyl Chloride
196
Gasket
Grade
E
O
O
T
O
O
E/T
T/O
T
E/T
E
E/T
E/T
O
O
O
T
T
O
E
E
T
E
T
T
T
T
E
T
E/T
T
T
E
E
T
T
O
O
T/E
E
E
E
L
E
E
E
E
Chemical
Gasket
Composition
Grade
Ethyl Ether
T
Ethyl Oxalate
E
Ethyl Silicate
T
Ethylene
E
Chlorohydrin
Ethylene Diamine
T
Ethylene Dichloride
O
(Dichloroethane)
Ethylene Glycol
E/T
Ferric Chloride, to
E/T
35%
Ferric Chloride,
E
Saturated
Ferric Hydroxide
E
Ferric Sulfate
T
Fire Fighting
E/O
Foam Concentrate
Fluboric Acid
E/T
Fly Ash
E
FM200
E
HFC-227ea
Fog Oil
T
Formaldehyde
E/T
Formamide
E/T
Formic Acid
E
Freon 11, 130°F/54°C
T
Freon 12,
T
130°F/54°C
Freon 113
T
130°F/54°C
Freon 114,130°F/54°C
T
Freon
E/T
134a,176°/80°C
Fructose
E/T
Fuel Oil
T
Fumaric Acid
E
Furfuryl Alcohol
E
Gasoline, Refined
T
Gasoline, Refined,
O
Unleaded
Glue
E/T
Glycerin
E/T
Glycerol
E/T
Glycol
E/T
Glycolic Acid
E
Grease
T
Green Sulfate Liquor
T
Halon 1301
E
Heptane
T
Hexaldehyde
E
Hexane
T
Hexanol Tertiary
T
Hexyl Alcohol
T
Hexylene Glycol
T
Chemical
Gasket
Composition
Grade
Hydrobromic Acid,
E
to 40%
Hydrochloric Acid, to
E
36%, 75°F/24°C
Hydrochloric Acid, to
O
36%,158°F/70°C
Hydrocyanic Acid
E
Hydrofluoric Acid, to
O
75%, 75°F/24°C
Hydrofluosilicic Acid
E
Hydrogen Gas, Cold
E/T
Hydrogen Gas, Hot
E
Hydrogen Peroxide,
L
to 50%
Hydrogen Peroxide,
O
to 90%
Hydrogen Sulfide
E
Hydroquinone
T
Hydroxylamine
E
Sulfate
Hypochlorous Acid,
E
Dilute
Iso Octane,
T
100°F/38°C
Isobutyl Alcohol
E
Isopropyl Acetate
E
Isopropyl Alcohol
E
Isopropyl Ether
T
JP-3
T
JP-4
T
JP-5, 6, 7, 8
T
Kerosene
T
Ketones
E
Latex (1% Styrene &
O
Butadiene)
Lauric Acid
T
Lavender Oil
T
Lead Acetate
T
Lead Chloride
E
Lead Sulfate
T
Lime and H2O
E/T
Linoleic Acid
O
Lithium Bromide
T
Lithium Chloride
T
Lubricating Oil,
T
Refined
Lubricating Oil, Sour
T
Lubricating Oil, to
T
150°F/66°C
Magnesium Chloride
E/T
Magnesium
E/T
Hydroxide
Magnesium Sulfate
E/T
Maleic Acid
T
Malic Acid
T
Mercuric Chloride
E/T
Chemical
Gasket
Composition
Grade
Mercuric Cyanide
T
Mercurous Nitrate
E/T
Mercury
T
Methane
T
Methyl Alcohol,
E/T
Methanol
Methyl Chloride
O
Methyl Ethyl Ketone
E
Methyl Isobutyl
E
Carbinol
Methylene Chloride
O
Methylene Dichloride
O
100°F/38°C
MIL-L7808
O
MIL-05606
O
MIL-08515
O
Mineral Oils
T
Naptha, 160°F/71°C
O
Napthenic Acid
T
Natural Gas
T
Nevoil
E
Nickel Chloride
E/T
Nickel Plating
E/T
Solution 125°F/52°C
Nickel Sulfate
E/T
Nitric Acid to 10%,
E
75°F/24°C
Nitric Acid, 10-50%,
O
75°F/24°C
Nitric Acid, 50-86%,
O
75°F/24°C
Nitric Acid, Red
O
Fuming
Nitromethane
E
Nitrous Oxide
E
NOVEC 1230
E
FK-5-1-12
Ogisogiric Acid, to
O
75%, 150°F/66°C
Oil, Crude Sour
T
Oil, Motor
T
Oleic Acid
T
Oronite 8200 Silicate
O
Ester Fluid
OrthodichloroO
benzene
OS-45 Silicate
O
Ester Fluid
OS-45-1
O
Oxalic Acid
E
Oxygen, Cold
E
Ozone
E
Palmitic Acid
T
Pentane
T
Perchloroethylene
O
www.grinnell.com
GASKETS
Gasket Air, Water & Chemical Recommendations
(Page 3 of 3)
Tech Data Sheet: G610
Chemical
Gasket
Composition
Grade
Potassium Sulfate
T
Prestone
T
Propane Gas
T*
Propanol
E
Propargyl Alcohol
E
Propyl Alcohol
T
Propylene Dichloride
L
Propylene Glycol
E
Pyranol 1467
T
Pyranol 1476
T
Pyroguard “C”
T
Pyroguard “D”
T
Pyroguard 55
E
Pyrrole
E
Ref. Fuel (70 ISO
T
Octane, 30 Toluene)
Rosin Oil
T
Salicylic Acid
E
Secondary Butyl
T
Alcohol
Sewage
E/T
Silver Nitrate
E
Silver Sulfate
E
Skydrol, 200°F/93°C
L
Skydrol 500
E
Phosphate Ester
Soap Solutions
E/T
Soda Ash,
E/T
Sodium Carbonate
Sodium Acetate
E
Sodium Alum
T
Sodium Benzoate
E
Sodium Bicarbonate
E/T
Sodium Bisulfate
E/T
Sodium Bisulfite
E/T
(Black Liquor)
Sodium Bromide
E/T
Sodium Carbonate
E/T
Sodium Chlorate
E
Sodium Chloride
E/T
Sodium Cyanide
E/T
Sodium Dichromate,
E/T
to 20%
Sodium Ferricyanide
E/T
Sodium
E/T
Ferrocyanide
Sodium Fluoride
E/T
Sodium Hydro
T
Sulfide
Sodium Hydroxide
E
to 50%
Sodium
E
Hypochlorite, to 20%
Chemical
Composition
Sodium
Metaphosphate
Gasket
Grade
T
Sodium Nitrate
E
Sodium Nitrite
E/T
Sodium Perborate
E
Sodium Peroxide
E
Sodium Phosphate,
Dibasic
T
Sodium Phosphate,
Monobasic
T
Sodium Phosphate,
Tribasic
T
Sodium Silicate
T
Sodium Sulfate
E/T
Sodium Sulfide
T
Sodium Sulfite
Solution, to 20%
T
Sodium Thiosulfate,
“Hypo”
T
Sohovis 47
T
Sohovis 78
T
Solvasol #1
T
Solvasol #2
T
Solvasol #3
T
Solvasol #73
T
Spindle Oil
T
Stannic Chloride
T
Stannous Chloride,
to 15%
T
Starch
T
Stearic Acid
T
Stoddard Solvent
T
Styrene
O
Sulfonic Acid
E
Sulphite Acid Liquor
E
Sulfur
E
Sulfur Chloride
O
Sulfur Dioxide, Dry
E/T
Sulfur Dioxide,
Liquid
E
Sulfur Trioxide, Dry
O
Sulfuric Acid, to
25%, 150°F/66°C
E
Sulfuric Acid, 2550%, 200°F/93°C
O
Sulfuric Acid, 5095%, 150°F/66°C
O
Sulfuric Acid, Fuming
O
Sulfuric Acid, Oleum
O
Sulfurous Acid
O
Tall Oil
T
Refer to back cover for country-specific customer care numbers.
Chemical
Gasket
Composition
Grade
Tanning Liquors
(50g. alum. solution,
T
50g. dichromate
solution)
Tartaric Acid
E
Tertiary Butyl
E/T
Alcohol
Tetrabutyl Titanate
E
Tetrachloroethylene
O
Thionyl Chloride
T
Terpineol
T
Titanium
O
Tetrachloride
Toluene, 30%
T
Transmission Fluid,
O
Type A
Triacetin
T
Trichloroethane
O
Trichloroethylene, to
O
200°F/93°
Tricresyl Phosphate
E
Triethanolamine
E/T
Trisodium Phosphate
E
Tung Oil
T
Turbo Oil #15 Diester
O
Lubricant
Turpentine
T
Urea
T
Vegetable Oils
T
Vinyl Acetate
E
Vi-Pex
T
Water, to 150°F/66°C E/T
Water, to 200°F/93°C
E
Water, to
E
230°F/110°C
Water, Acid Mine
E/T
Water, Chlorine
E
Water, Deionized
E
Water, Potable
EN
Water, Seawater
E
Water, Waste
E/T
White Liquor
E
Wood Oil
T
Xylene
O
Zinc Chloride, to
E
50%
Zinc Nitrate
E
Zinc Sulfate
E/T
GASKETS
Chemical
Gasket
Composition
Grade
Petroleum Ether (see
O
Benzene)
Petroleum Oils
T
Phenol (Carbolic
O
Acid)
Phenylhydrazine
E
Phenylhydrazine
E
Hydrochloride
Phosphate Ester
E
Phosphoric Acid, to
E/T
75% and 70°F
Phosphoric Acid, to
O
85% and 200°F
Photographic
T
Solutions
Phthalic Anhydride
E
Polybutene
T
Polyvinyl Acetate,
Solid
(In Liquid State is
E
50% solution of
Methanol or 60%
solution of H2O)
Potassium Alum
E/T
Potassium
E/T
Bicarbonate
Potassium
E/T
Bichromate
Potassium Borate
E
Potassium Bromate
E
Potassium Bromide
E/T
Potassium
E/T
Carbonate
Potassium Chlorate
E
Potassium Chloride
E
Potassium Chromate
T
Potassium Cyanide
E/T
Potassium
E
Dichromate
Potassium
E
Ferricyanide
Potassium
E
Ferrocyanide
Potassium Fluoride
E
Potassium Hydroxide
T
Potassium Nitrate
T
Potassium Perborate
E
Potassium
T
Perchlorate
Potassium
Permanganate,
E
Saturated to 10%
Potassium
Permaganate
E
Saturate 10-25%
Potassium Persulfate
T
Potassium Silicate
E/T
* Conditional, contact GRINNELL
Mechanical Products
197
GASKETS
GRINNELL Gasket Lubricants
Tech Data Sheet: G610
During installation of a GRINNELL Coupling, always lubricate
the gasket. For couplings using the tri-seal gasket in a low
temperature application, use a petroleum-free silicone based
lubricant. For mechanical tees and straps when used in low
temperature applications, use a petroleum-free silicone based
lubricant, otherwise no lubricant is required.
Application
La-Co
Industries
Lubri-Joint
Dow Corning*
7 Release Compound
(Silicone)
Chilled Water
•
•
Heating
•
•
Compressed Air
•
•
Drainage
•
•
Sewage
•
•
Low Temp./Vacuum
•
•
Fire Protection
•
•
GRINNELL Mechanical Piping Products recommends two kinds
of lubricant:
• La-Co Industries Lubri-Joint
• Dow Corning* 7 Release Compound (Silicone)
Check lubricant chart to be certain the proper lubricant is
recommended for the service intended. For information on
health safety, contact GRINNELL Mechanical Products for
Material Safety Data Sheets (MSDS).
Available in:
• 1 Quart (0,95 Liter)
• 1 Gallon (3,8 Liter)
GASKETS
The table below will give an indication on the approximate
number of gaskets which can be lubricated with one
container of lubricant.
Silicone Gasket Lubricant recommended for use with tri-seal
gasket (Dow Corning D.C. No. 7)* available in:
• 5.3 oz (150 grams) Tube
Gasket
Size
Lubri-Joint
1 qt (946 ml)
Container
Silicone
5.3 oz (150 g) Tube
11 ⁄ 4" / 32mm
650
116
1
1 ⁄ 2 " / 40mm
570
94
2" / 50mm
440
73
3" / 80mm
300
50
4" / 100mm
220
36
6" / 150mm
135
22
8" / 200mm
110
18
10" / 250mm
85
14
12" / 300mm
65
10
14" / 350mm
55
9
16" / 400mm
50
8
18" / 450mm
38
6
20" / 500mm
33
5
24" / 600mm
20
3
• 8 lb (3,6 kg) Can
* Dow Corning is a registered trademark
of Dow Corning Corporation.
198
www.grinnell.com
199
PREPARATION EQUIPMENT
Preparation Equipment Table of Contents
Pipe Tape
Page 204
Portable
Roll Groovers
Pages 205 - 206
Field Portable
Roll Groovers
Page 207
Automated
Roll Groovers
Page 208 - 209
PREPARATION EQUIPMENT
Portable
Cut Groovers
Page 210
Pipe Support
Stands
Page 211
Hole Cutting
Tools
Page 212
200
www.grinnell.com
PREPARATION EQUIPMENT
Roll Groove Standard Specification for Steel & Other IPS Pipe
Tech Data Sheet: G710
1
1 ⁄4
32
11 ⁄ 2
Tolerance
O.D.
A
B
±0.030" ±0.030"
±0,76mm ±0,76mm
Inches
Inches
mm
mm
C
Groove Diameter
Inches
mm
Tol.
Actual
+0.000
Maximum
D
T
Groove
Allow
Minimum
Depth
Flare
Wall
(ref. only)
Diameter
Inches
Inches
Inches
mm
mm
mm
+
-
1.660
0.016
0.016
0.625
0.281
1.535
-0.015
0.062
0.065
1.77
42,4
0,41
0,41
15,88
7,14
38,99
-0,38
1,60
1,65
44,96
1.900
0.019
0.019
0.625
0.281
1.775
-0.015
0.062
0.065
2.01
51,05
40
48,3
0,48
0,48
15,88
7,14
45,09
-0,38
1,60
1,65
2
2.375
0.024
0.024
0.625
0.344
2.250
-0.015
0.062
0.065
2.48
50
60,3
0,61
0,61
15,88
8,74
57,15
-0,38
1,60
1,65
62,99
21 ⁄ 2
2.875
0.029
0.029
0.625
0.344
2.720
-0.018
0.078
0.083
2.98
65
73,0
0,74
0,74
15,88
8,74
69,09
-0,46
1,98
2,11
75,69
76,1mm
3.000
0.030
0.030
0.625
0.344
2.845
-0.018
0.076
0.083
3.10
65
76,1
0,76
0,76
15,88
8,74
72,26
-0,46
1,93
2,11
78,74
3
3.500
0.035
0.031
0.625
0.344
3.344
-0.018
0.078
0.083
3.60
80
88,9
0,89
0,79
15,88
8,74
84,94
-0,46
1,98
2,11
91,44
4
4.500
0.045
0.031
0.625
0.344
4.334
-0.020
0.083
0.083
4.60
100
114,3
1,14
0,79
15,88
8,74
110,08
-0,51
2,11
2,11
116,84
139,7mm
5.500
0.056
0.031
0.625
0.344
5.334
-0.022
0.083
0.109
5.60
125
139,7
1,42
0,79
15,88
8,74
135,48
-0,56
2,11
2,77
142,24
5
5.563
0.056
0.031
0.625
0.344
5.395
-0.022
0.084
0.109
5.66
125
141,3
1,42
0,79
15,88
8,74
137,03
-0,56
2,13
2,77
143,76
165,1mm
6.500
0.063
0.031
0.625
0.344
6.330
-0.022
0.085
0.109
6.60
150
165,1
1,60
0,79
15,88
8,74
160,78
-0,56
2,16
2,77
167,64
6
6.625
0.063
0.031
0.625
0.344
6.455
-0.022
0.085
0.109
6.73
150
168,3
1,60
0,79
15,88
8,74
163,96
-0,56
2,16
2,77
170,94
8
8.625
0.063
0.031
0.750
0.469
8.441
-0.025
0.092
0.109
8.80
200
219,1
1,60
0,79
19,05
11,91
214,40
-0,64
2,34
2,77
223,52
10
10.750
0.063
0.031
0.750
0.469
10.562
-0.027
0.094
0.134
10.92
250
273,0
1,60
0,79
19,05
11,91
268,27
-0,69
2,39
3,40
277,37
12
12.750
0.063
0.031
0.750
0.469
12.531
-0.030
0.109
0.156
12.92
300
323,9
1,60
0,79
19,05
11,91
318,19
-0,76
2,77
3,96
328,17
14
14.000
0.063
0.031
0.938
0.469
13.781
-0.030
0.109
0.156
14.10
350
355,6
1,60
0,79
23,83
11,91
350,04
-0,76
2,77
3,96
358,14
16
16.000
0.063
0.031
0.938
0.469
157.81
-0.030
0.109
0.165
16.10
400
406,4
1,60
0,79
23,83
11,91
400,84
-0,76
2,77
4,19
408,94
18
18.000
0.063
0.031
1.000
0.469
17.781
-0.030
0.109
0.165
18.16
450
457,2
1,60
0,79
25,40
11,91
451,64
-0,76
2,77
4,19
461,26
20
20.000
0.063
0.031
1.000
0.469
19.781
-0.030
0.109
0.188
20.16
512,06
500
508,0
1,60
0,79
25,40
11,91
502,44
-0,76
2,77
4,78
24
24.000
0.063
0.031
1.000
0.500
23.656
-0.030
0.172
0.218
24.20
600
609,6
1,60
0,79
25,40
12,70
600,86
-0,76
4,37
5,54
614,68
(1) The maximum allowable tolerances for IPS Pipe from
square cut ends is:
0.030" (0,76mm) for sizes 11 ⁄ 4" thru 3" (32 – 80mm);
0.045" (1,14mm) for sizes 4" – 6" (100 – 150mm); and
0.060" (1,52mm) for sizes 8" (200mm) and above.
(2) Gasket Seating Surface “A” must be free from score marks,
ridges, indentations, projections, loose paint, scale, dirt
chips, grease, rust, etc. that would prevent a positive seal.
B
A
T
OD C
D
GRINNELL Roll Grooves
conform to AWWA
C-606 specification.
PREPARATION EQUIPMENT
Nominal
Pipe
Size
Inches
mm
Pipe O.D.
Inches mm
(3) Groove Diameter “C” must be of uniform depth
around the circumference of the pipe.
(4) Groove Depth “D” is a reference dimension only.
The Groove Diameter “C” must be maintained.
(5) Minimum Wall Thickness “T” is the minimum
wall thickness that should be roll grooved.
(6) Maximum allowable pipe end flare diameter
is measured at the pipe end diameter.
Refer to back cover for country-specific customer care numbers.
201
PREPARATION EQUIPMENT
Cut Groove Standard Specification for Steel & Other IPS Pipe
Tech Data Sheet: G710
A
B
OD C
PREPARATION EQUIPMENT
D
T
Pipe O.D.
Inches
mm
Tolerance
Nominal
Pipe
Size
Inches
mm
O.D.
11 ⁄ 4
32
11 ⁄ 2
+
-
1.660
0.016
0.016
0.625
42,4
0,41
0,41
15,88
1.900
0.019
0.019
0.625
Actual
Tol.
+0.000
0.313
1.535
-0.015
0.062
7,95
38,99
-0,38
1,60
1,60
0.313
1.775
-0.015
0.062
0.062
T
Minimum
Wall
Inches
mm
0.062
40
48,3
0,48
0,48
15,88
7,95
45,09
-0,38
1,60
1,60
2
2.375
0.024
0.024
0.625
0.313
2.250
-0.015
0.062
0.062
50
60,3
0,61
0,61
15,88
7,95
57,15
-0,38
1,60
1,60
21 ⁄ 2
2.875
0.029
0.029
0.625
0.313
2.720
-0.018
0.078
0.078
65
73,0
0,74
0,74
15,88
7,95
69,09
-0,46
1,98
1,98
76,1mm
3.000
0.030
0.030
0.625
0.313
2.845
-0.018
0.076
0.076
65
76,1
0,76
0,76
15,88
7,95
72,26
-0,46
1,93
1,93
0.078
3
3.500
0.035
0.031
0.625
0.313
3.344
-0.018
0.078
80
88,9
0,89
0,79
15,88
7,95
84,94
-0,46
1,98
1,98
4
4.500
0.045
0.031
0.625
0.375
4.334
-0.020
0.083
0.083
100
114,3
1,14
0,79
15,88
9,53
110,08
-0,51
2,11
2,11
139,7mm
5.500
0.056
0.031
0.625
0.375
5.334
-0.020
0.083
0.083
125
139,7
1,42
0,79
15,88
9,53
135,48
-0,51
2,11
2,11
5
5.563
0.056
0.031
0.625
0.375
5.395
-0.022
0.084
0.084
125
141,3
1,42
0,79
15,88
9,53
137,03
-0,56
2,13
2,13
165,1mm
6.500
0.063
0.031
0.625
0.375
6.330
-0.022
0.085
0.085
150
165,1
1,60
0,79
15,88
9,53
160,78
-0,56
2,16
2,16
6
6.625
0.063
0.031
0.625
0.375
6.455
-0.022
0.085
0.085
150
168,3
1,60
0,79
15,88
9,53
163,96
-0,56
2,16
2,16
8
8.625
0.063
0.031
0.750
0.438
8.441
-0.025
0.092
0.092
200
219,1
1,60
0,79
19,05
11,13
214,40
-0,64
2,34
2,34
10
10.750
0.063
0.031
0.750
0.500
10.562
-0.027
0.094
0.094
250
273,0
1,60
0,79
19,05
12,70
268,27
-0,69
2,39
2,39
12
12.750
0.063
0.031
0.750
0.500
12.531
-0.030
0.109
0.109
300
323,9
1,60
0,79
19,05
12,70
318,19
-0,76
2,77
2,77
14
14.000
0.063
0.031
0.938
0.500
13.781
-0.030
0.109
0.281
350
355,6
1,60
0,79
23,83
12,70
350,04
-0,76
2,77
7,14
16
16.000
0.063
0.031
0.938
0.500
157.81
-0.030
0.109
0.312
400
406,4
1,60
0,79
23,83
12,70
400,84
-0,76
2,77
7,92
18
18.000
0.063
0.031
1.000
0.500
17.781
-0.030
0.109
0.312
450
457,2
1,60
0,79
25,40
12,70
451,64
-0,76
2,77
7,92
20
20.000
0.063
0.031
1.000
0.500
19.781
-0.030
0.109
0.312
500
508,0
1,60
0,79
25,40
12,70
502,44
-0,76
2,77
7,92
24
24.000
0.063
0.031
1.000
0.562
23.656
-0.030
0.172
0.375
600
609,6
1,60
0,79
25,40
14,27
600,86
-0,76
4,37
9,53
(1) The maximum allowable tolerances for IPS Pipe from
square cut ends is:
0.030" (0,76mm) for sizes 11 ⁄ 4" thru 3" (32 – 80mm );
0.045" (1,14mm) for sizes 4" – 6" (100 – 150mm); and
0.060" (1,52mm) for sizes 8" (200mm) and above.
(2) Gasket Seating Surface “A” must be free from score marks,
ridges, indentations, projections, loose paint, scale, dirt
chips, grease, rust, etc. that would prevent a positive seal.
202
C
Groove Diameter
Inches
mm
D
Groove
Depth
(ref. only)
Inches
mm
A
B
±0.030"
±0.030"
± 0,76mm ± 0,76mm
Inches
Inches
mm
mm
(3) Groove Diameter “C” must be of uniform depth around the
circumference of the pipe.
(4) Groove Depth “D” is a reference dimension only. The
Groove Diameter “C” must be maintained.
(5) Minimum Wall Thickness “T” is the minimum wall thickness
that should be cut grooved.
www.grinnell.com
PREPARATION EQUIPMENT
Roll Groove Standard Specification for Copper Tubing
Tubing O.D.
Inches
mm
Tolerance
Nominal
Tubing
Size
Inches
mm
O.D.
+
-
C
A
B
Groove Diameter
±0.030" ±0.030"
Inches
±0.76mm ±0.76mm
mm
Inches
Inches
Tol.
mm
mm
Actual
0.000
D
Nominal
Groove
Depth
Inches
mm
Tech Data Sheet: G720
T
Maximum
Minimum Flare
Wall
Diameter
Inches
Inches
mm
mm
2"
2.125
0.002
0.002
0.610
0.300
2.029
-0.020
0.048
0.058
50
54,0
0,05
0.05
15,5
7,6
51,5
-0,51
1,2
1,5
56,4
21 ⁄ 2"
2.625
0.002
0.002
0.610
0.300
2.525
-0.020
0.050
0.065
2.720
66,7
0,05
0,05
15,5
7,6
64,1
-0,51
1,2
1,7
69,1
3"
3.125
0.002
0.002
0.610
0.300
3.025
-0.020
0.050
DWV
3.220
80
79,4
0,05
0,05
15,5
7,6
76,8
-0,51
1,2
–
81,8
4"
4.125
0.002
0.002
0.610
0.300
4.019
-0.020
0.053
DWV
4.220
100
104,8
0,05
0,05
15,5
7,6
102,1
-0,51
1,4
–
107,2
5"
5.125
0.002
0.002
0.610
0.300
4.999
-0.020
0.053
DWV
5.220
125
130,2
0,05
0,05
15,5
7,6
127,0
-0,51
1,4
–
132,6
6"
6.125
0.002
0.002
0.610
0.300
5.999
-0.020
0.063
DWV
6.220
150
155,6
0,05
0,05
15,5
7,6
152,3
-0,51
1,6
–
158,0
8"
8.125
0.002
0.004
0.610
0.300
7.959
-0.020
0.083
DWV
8.220
200
206,4
0,05
0,10
15,5
7,6
202,2
-0,51
2,1
–
208,8
(2) Outside Diameter “OD”, of roll grooved tubing shall not
vary more than the tolerance listed. The maximum tolerance from square cut ends is: 0.030" (0,76mm) for sizes
2" – 3" (54,0 – 79,4mm); 0.045" (1,14mm) for sizes 4" –
6" (104,8 – 155,6mm); measured from true square line.
(3) Gasket Seating Surface “A”, must be free from roll marks,
indentations, projections, loose scale, dirt, chips, grease,
etc. that would prevent a positive seal.
OD C
D
(5) The Groove Diameter “C”, must be uniform in depth for
the entire circumference of the tubing. Groove must be
maintained within the tolerance listed.
(6) Groove Depth “D”, is a reference dimension only. The
Groove Diameter “C” must be maintained.
(7) Minimum Wall Thickness “T”, per ASTM B-306 drain waste
and vent (DWV) is minimum wall thickness copper tubing,
which may be roll grooved.
(8) Maximum Flare Diameter is the O.D. at the most extreme
tubing diameter.
PREPARATION EQUIPMENT
(4) Groove Width Bottom “B”, to be free of loose dirt, chips
and scale that may interfere with proper
coupling assembly.
T
2.220
65
(1) Nominal Tubing, ASTM B-88 drawn copper tubing size.
B
A
Refer to back cover for country-specific customer care numbers.
203
PREPARATION EQUIPMENT
Pipe Tape
Model PT 1000 was developed to check the groove diameter in roll-grooved pipe. The tape measures the groove
in steel pipe 1" – 12" (25mm - 305mm) and copper tube
2" – 8" (50mm - 200mm).
The loop extending from the metal housing consists of a
clear-plastic window with a vertical indicator line and the
adjustable metal measuring tape. The adjustable measuring
tape has groove tolerance blocks (thick black lines) that are
visible through the plastic view window. The groove tolerance blocks are marked with the associated pipe diameters.
Model PT 2000 measures the groove in steel pipe from
1" – 36" (25mm - 915mm) in 100th’s of inches.
Note: The GRINNELL Roll Pipe Measuring Tape is not a calibrated tool and is to be used for reference only. To ensure accuracy, always check grooved pipe
dimensions with calibrated gauges or calipers. For Roll Groove Standard Specifications for Steel Pipe and Other IPS Pipe, refer to Data Sheet G710. For Roll
Groove Standard Specification for Copper Tube, refer to Data Sheet G720.
Portable Roll Groovers With Electric Motor
Self-contained portable roll grooving machines are supplied with electric motors for roll grooving pipe on the job site. Each
machine comes in a shipping/storage box and includes a hydraulic hand pump, top and bottom rolls, guards and foot switch.
Additional rolls may be ordered with machines. Contact GRINNELL Mechanical Products.
Size Range - Inches mm
Pace Model
1112
1023
Drive
Schedule 40
Schedule 10
Std. Wall
Copper
1" – 12"
25mm - 300mm
11 ⁄ 4" – 12"
32mm - 300mm
11 ⁄ 4" - 12"
32mm - 300mm
11 ⁄ 4" - 24"
32mm - 600mm
–
–
12" – 24"
300mm - 600mm
2" – 6"
50mm - 150mm
2" – 6"
50mm - 150mm
11 ⁄ 2 HP, 110 v
11 ⁄ 2 HP, 110 v
Roll Grooving Machines are available for rent. Contact your GRINNELL Mechanical Products representative for details and availability.
PREPARATION EQUIPMENT
*Please specify power outlet when ordering
204
www.grinnell.com
PREPARATION EQUIPMENT
Model 1112 Portable Roll Groovers With Electric Motor
• Schedule 40 Capacity 1" – 12" (25mm - 300mm)
• Copper Tube 2" – 6" (50mm - 150mm) (K, L, M and DWV)
• Pipe Rotation Speed of 35 RPM
• Spindle height from floor is 35" (889mm)
• Hydraulic Pressure at Roller is 15,000 PSI (1034,2 bar) Max
• Electric Motor 11 ⁄ 2 HP, 60 Hz, 110 v.1 PH*
Floor Space Required: 32" x 32" (813mm x 813mm)
Weight: 220 lbs (99,8 kg)
Standard Equipment:
Electric Drive Motor, Groove Depth Gauge, Hydraulic Hand Pump,
Top and Bottom Rolls 1" – 12" (25mm - 300mm),
Shipping/Storage Box, Guards, Foot Switch
Optional Equipment:
Top and Bottom copper Rolls, Nipple Bracket, Mounting Feet
* Other current characteristics available contact GRINNELL
Mechanical Products.
Model 1023 Portable Roll Groovers With Electric Motor
• Schedule 40 11 ⁄ 4" – 12" (32mm – 300mm)
• Standard Wall 12" – 24" (300mm – 600mm)
• Copper Tube 2" – 6" (50mm - 150mm)
(K, L, M and DWV)
• Pipe Rotation Speed of 30 RPM
• Spindle height from floor is 33" (838mm)
• Hydraulic Pressure at Roller is 16,000 PSI (1103,2 bar) Max
• Electric Motor 11 ⁄ 2 HP, 60 Hz, 110 v or 220v
PREPARATION EQUIPMENT
Floor Space Required: 311 ⁄ 2" x 331 ⁄ 2" (800mm - 851mm)
Weight: 430 lbs (195 kg)
Standard Equipment:
Electric Motor, Groove Depth Gauge, Hydraulic Pump,
Shipping/Storage Box, Rolls as Specified on Price List,
Guards, Foot Switch
Optional Equipment:
Top and Bottom Copper Rolls, Nipple Bracket, Mounting Feet
Refer to back cover for country-specific customer care numbers.
205
PREPARATION EQUIPMENT
Portable Roll Groovers For Ridgid® 300 Pipe Threader
Models 1012, 1022 and 1041 Roll Grooving Machines are designed to be mounted quickly and easily
on a Ridgid® Model 300 unit.*
Pace Model
1012
1022
1041
Schedule 40
1" – 12"
25mm - 300mm
11 ⁄ 4" – 12"
32mm - 300mm
1" – 6"
25mm - 150mm
Size Range - Inches mm
Schedule 10
Std. Wall
–
–
–
–
–
12" – 16"
–
300mm - 400mm
1" – 12"
–
25mm - 300mm
–
Drive
Copper
2" – 6"
50mm - 150mm
2" – 6"
50mm - 150mm
2" – 6"
50mm - 150mm
Ridgid ® 300
Ridgid ® 300
Ridgid ® 300
* Ridgid is a registered trademark of Ridgid Tool Company.
Model 1012 Portable Roll Groovers
• Schedule 40 1" – 12" (25mm - 300mm)
• Copper Tube Capacity 2" – 6" (50mm - 150mm) (K, L, M and DWV)
• Hydraulic Hand Pump
Weight: 125 lbs (56,7 kg)
Standard Equipment:
Top and Bottom Rolls 1" – 12" (25mm - 300mm), Groove Depth Gauge,
Hydraulic Hand Pump, Guards
Optional Equipment:
Top and Bottom Copper Rolls, Pipe Nipple, and Stabilizer Bracket
Model 1022 Portable Roll Groovers
• Schedule 40 Capacity 11 ⁄ 4" – 12" (32mm - 300mm)
• Standard Wall Capacity 12" – 16" (300mm - 400mm)
• Copper Tube Capacity 2" – 6" (50mm - 150mm) (K, L, M)
• Hydraulic Pressure at Roller is 16,000 PSI (1103,2 bar) Max
Weight: 285 lbs (129 kg)
Standard Equipment:
Top and Bottom Rolls 11⁄4" – 16" (32mm - 400mm), Hydraulic Hand Pump, Grooved
Depth Gauge, Shipping/Storage Box, Pipe Nipple and Stabilizer Bracket, Guards
PREPARATION EQUIPMENT
Optional Equipment:
Top and Bottom Copper Rolls
Model 1041 Portable Roll Groovers
• Schedule 40 Capacity 1" – 6" (25mm - 150mm)
• Schedule 10 Capacity 1" – 12" (25mm - 300mm)
• Copper Tube Capacity 2" – 6" (50mm - 150mm) (K, L, M and DWV)
• Hydraulic Pressure at Roller is 8,000 PSI (551,6 bar) Max
Weight: 94 lbs (42 kg)
Standard Equipment:
Top and Bottom Rolls 1" – 12" (25mm - 300mm), Hydraulic Hand Pump,
Grooved Depth Gauge and Guards
Optional Equipment:
Top and Bottom Copper Rolls
206
www.grinnell.com
PREPARATION EQUIPMENT
MINI-MITES Field Portable
®
Field Portable Mini-Mites are designed to be adapted for use with Ridgid Model 300 machines. Model 1039-66 can be
operated with its own hand ratchet so that no other tools are required.
Pace Model
1039-66
1039-66
1034
1066
Schedule 40
–
–
11 ⁄ 4" – 6"
32mm - 150mm
11 ⁄ 4" – 6"
32mm - 150mm
–
–
Size Range - Inches mm
Schedule 10
Std. Wall
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Copper
2" – 8"
50mm - 200mm
–
–
–
–
2" – 8"
50mm - 200mm
Drive
Ridgid ® 300,
hand crank
Ridgid ® 300,
hand crank
Ridgid ® 300
Ridgid ® 300
Model 1039-66 MINI-MITES Field Portable
• Copper Tube Capacity 2" – 8" (50mm - 200mm) (K, L, M and DWV)
• Manual Grooving With Ratchet Hand Crank
• Can be Used with Ridgid® Model 300 With No
Gearbox Removal
• Self-contained
Standard Equipment:
Copper Rolls 2" – 8" (50mm - 200mm), Multi-Function Ratchet Hand Crank
Optional Equipment:
Top and Bottom Rolls Steel Pipe
Model 1039 MINI-MITES Field Portable
• Schedule 40 Capacity 11 ⁄ 4" – 6" (32mm - 150mm)
• Manual Grooving With Ratchet Hand Crank
• Can be Used with Ridgid® Model 300 With No Gearbox Removal
• Self-contained
Standard Equipment:
Steel Rolls 11 ⁄ 4" – 6" (32mm - 150mm), Multi-Function Ratchet Hand Crank
Optional Equipment:
Top and Bottom Rolls Copper Tube
• Schedule 40 Capacity 11 ⁄ 4" – 6" (32mm - 150mm)
• Used with the Ridgid® Model 300 Threader
Standard Equipment:
Steel Pipe Rolls 11⁄4" – 6" (32mm - 150mm)
Model 1066 MINI-MITES Field Portable
• Copper Tube Capacity 2" – 8" (50mm - 200mm)
(K, L, M and DWV)
• Used With the Ridgid® Model 300 Threader
Standard Equipment:
Copper Rolls 2" – 8" (50mm - 200mm)
Refer to back cover for country-specific customer care numbers.
207
PREPARATION EQUIPMENT
Model 1034 MINI-MITES Field Portable
PREPARATION EQUIPMENT
AUTOMATED ROLL GROOVERS
The Automated Roll Grooving Machines are designed for use in the shop. The machines have a self-contained hydraulic system
that produces consistent quality roll grooves in high production runs.
Pace Model
2021
2050
2112
Schedule 40
11 ⁄ 4" – 12"
32mm - 300mm
4" – 12"
100mm - 200mm
1" – 12"
25mm - 300mm
Size Range - Inches mm
Schedule 10
Std. Wall
–
12" – 24"
–
300mm - 600mm
4" – 30"
–
100mm - 800mm
–
–
–
–
–
Drive
Copper
2" – 8"
50mm - 200mm
–
–
2" – 8"
50mm - 200mm
3 HP, 220 v
5 HP, 220 v
11 ⁄ 2 HP, 110 v
Model 2021 AUTOMATED ROLL GROOVERS
• Schedule 40 11 ⁄ 4" – 12" (32mm - 300mm)
• Standard Wall 12" – 24" (300mm - 600mm)
• Copper Tubing 2" – 8" (50mm - 200mm) (K, L, M and DWV)
• Pipe Rotation Speed of 30 RPM
• Hydraulic Pressure at the Roller is 16,000 PSI (1103,2 bar) Max
• Electric Motor 3 HP, 60 Hz, 220 v, 3 PH
• Hydraulic Pump Motor 1 HP, 60 Hz, 220 v, 3 PH
• Ships Completely Assembled With 4" – 6"
(100m - 150mm) Top and Bottom Rollers
Floor Space Required: 30" x 20" (762mm - 508mm)
PREPARATION EQUIPMENT
Standard Equipment:
Electric Drive Motor, Limit Switch for Depth Gauging, Groove Depth Gauge,
Hydraulic Pump, Model 4037 Nipple Bracket, Rolls As Specified in Price List,
Guards, Foot Switch
208
www.grinnell.com
PREPARATION EQUIPMENT
AUTOMATED ROLL GROOVERS
Model 2050 AUTOMATED ROLL GROOVERS
• Schedule 40 4" – 12" (100mm - 300mm)
• Schedule 10 4" – 30" (100mm - 800mm)
• Pipe Rotation Speed of 30 RPM
• Hydraulic Pressure at the Roller is 20,000 PSI (1378 Bar) Max
• Spindle height from floor is 36" (914mm)
• Electric Drive Motor 5 HP, 60 Hz, 220 V.3PH
• Hydraulic Pump Motor 2 HP, 60 Hz, 220 V.3PH
• Ships Completely Assembled With 4" – 6"
(100mm - 150mm) Top and Bottom rollers
Floor Space Required: 40" x 36" (1016mm - 914mm)
Weight: 1,500 lbs (680 kg)
Standard Equipment:
Electric Drive Motor, Limit Switch for Depth Gauging, Groove Depth Gauge,
Hydraulic Pump Motor, Hydraulic Pump , Rolls As Specified in Price List,
Guards, Foot Switch
Model 2112 AUTOMATED ROLL GROOVERS
• Schedule 40 1" – 12" (40mm - 150mm)
• Copper Tubing 2" – 8" (50mm - 200mm) (K, L, M and DWV)
• Pipe Rotation Speed of 35 RPM
• Spindle height from floor is 35" (889mm)
• Hydraulic Pressure at the Roller is 15,000 PSI (1034 bar) Max
• Electric Motor 1 ⁄ 2 HP, 60 Hz, 110 v, 1 PH
• Hydraulic Pump Motor 1 HP, 60 Hz, 110 v, 1 PH
PREPARATION EQUIPMENT
• Ships Completely Assembled With 1" – 12" (100mm - 150mm)
Top and Bottom rollers
Floor Space Required: 30" x 22" (762mm - 559mm)
Weight: 470 lbs (213 kg)
Standard Equipment:
Electric Drive Motor, Limit Switch for Depth Gauging, Groove Depth Gauge,
Hydraulic Pump, Model 4037 Nipple Bracket, Rolls As Specified in Price List,
Guards, Foot Switch
Refer to back cover for country-specific customer care numbers.
209
PREPARATION EQUIPMENT
Model 1000 PORTABLE CUT GROOVER
Pace Model
1000
Schedule 40
2" – 12" *
50mm - 300mm
Size Range - Inches mm
Schedule 10
Schedule 80
–
2 1 ⁄ 2 " – 8"
–
65mm - 200mm
Std. Wall
–
–
Drive
1 HP, 115-230 v
* With optional collet chucks for 10" – 12" (250mm - 300mm) pipe.
• Schedule 40 2" – 12" (50mm - 300mm)
• Schedule 80 21 ⁄ 2" – 8" (65mm - 200mm)
• Tooling for Cut Grooving Ductile Iron Pipe Also Available
• Special collet chucks for Non-Standard Dimension Pipe Can Be Supplied
• Motor is 1 HP, 115-230 v, 1 PH
Weight: 185 lbs (84 kg)
Height: 38" (965,2 mm)
Standard Equipment:
PREPARATION EQUIPMENT
Collet chucks for 2" – 8” (50mm - 200mm), 4 High Speed Steel Grooving Blades,
Groove Gauge, Shipping/Storage Box
210
www.grinnell.com
PREPARATION EQUIPMENT
ACCESSORIES
Model 4031 Pipe Support Stands
Capacity: 1" – 4" (25mm - 100mm) Pipe; 600 lbs (272,2 kg) max
A 22" (559mm) diameter base with 2" (50mm) column gives this stand plenty of strength for
supporting any pipe size in its size range. The saddle has two roller bar bearings for free rotation of the pipe, and absorbs vibration to ensure a smooth, uniform groove. Saddle height is
adjustable over a 10" (250mm) range.
Model 4000 Pipe Support Stands
Capacity: 2" – 8" (50mm - 200mm) Pipe; 900 lbs (408,2 kg) max
The base of this stand is the same as used in the Model 4031. A saddle with four roller
bearings provides greater side support for the pipe and increases dampening of vibration
without impairing the unit's free-rolling characteristics. Saddle height is adjustable over a 10"
(250mm) range.
Model 4033 Pipe Support Stands
Capacity: 2" – 14" (50mm - 350mm) Pipe; 1,200 lbs (544,3 kg) max
Model 4040 Pipe Support Stands
Capacity: 12" – 24" (300mm - 600mm) Pipe; 4,000 lbs (1814,4 kg) max
Fabricated of 6" (150mm) diameter steel pipe welded to a 36" (914,4mm) base, the stand
can support up to two tons of pipe during grooving operations. Pipe saddle height is adjustable over a 5" (127mm) range.
Refer to back cover for country-specific customer care numbers.
211
PREPARATION EQUIPMENT
This extra-heavy-duty pipe support stand uses two 2" (50mm) columns on a 22" (550mm)
diameter base to give it exceptional stability and resistance to vibration and pendulum effect.
Each column incorporates a sturdy, threaded post infinitely adjustable over a 10" (250mm)
range. The saddle utilizes six roller bearings in an array that provides excellent support for all
pipes in its size range.
PREPARATION EQUIPMENT
ACCESSORIES
Model 3013 Porta-Bore
• Solid Alloy Aluminum Construction
• Motor is a 10 Amp draw industrial drill motor 110 v with internal 4-speed gear
box 110, 175, 245, 385 RPM
• Circuit breaker assures no safety hazard to the operator or machine
• Chain clamp is standard on all units and clamps to 11 ⁄ 4" – 12" (32mm - 300mm)
pipe diameters
• Optional speed toggle clamps; 11 ⁄ 4" – 6" (32mm - 150mm) pipe
• Oil feed
Weight: 42 lbs (19 kg)
Model 4037 Nipple Bracket
• Capacity: 8" – 24" (200mm - 600mm) Pipe
PREPARATION EQUIPMENT
• Fits Models 1020, 1021, 1023, 2020, 2021, and 2050 Roll Groovers
212
www.grinnell.com
213
PRESSURE & DESIGN DATA
Design
Tech Data Sheets: G810, G820, G830
Rigid Joints
GRINNELL Rigid Couplings provide rigid gripping of the pipe. They are designed
to bring the pipe ends close together and to ensure the coupling clamps firmly onto
the pipe OD and the bottom of the grooves. Because rigid couplings clamp around
the entire pipe surface, they provide resistance to flexural and torsional loads and
therefore permit longer spacing to ASME/ANSI B 31.1 (Power Piping) and ASME/
ANSI B 39.1 (Building Services) requirements.
Flexible Joints
GRINNELL Flexible Couplings act as an “expansion joint”, allowing linear and
angular movement of the pipe. They are designed with the coupling keys engaging
the pipe without gripping on the bottom of the grooves, while still providing for a
restrained mechanical joint. This is particularly useful to allow for pipe expansion/
contraction and piping misalignment.
For design purposes, the maximum
pipe end gap should be reduced to
account for field practices as follows:
Linear Movement (Flexible Couplings)
For thermal expansion with flexible
couplings, the pipe ends at each joint
should be fully gapped to the maximum
amount. This can be accomplished
by pressurizing the system and then
anchoring the system.
End Gap Reduction
End Gap
Pipe Size
Inches
mm
Maximum Pipe End
Gap
11 ⁄ 4 – 3
50%
42,4 – 88,9
Pipe Ends Gapped
for Expansion
For thermal contraction with flexible
couplings, the pipe ends at each joint
should be fully butted. The system can then
be anchored in place to prevent the pipe
ends from opening up to the maximum end
gap when pressurized.
Angular Deflection
GRINNELL Flexible Couplings are
capable of accommodating angular
deflection.
4 – 24
25%
114,3 – 610,0
The following values should be used
as available pipe end movements for
GRINNELL Figure 705, 707, and 716
Flexible Couplings:
Pipe Ends Butted
for Contraction
Pipe End Movements
Pipe Size
Inches
mm
Cut
Grooved
Inches
mm
Roll
Grooved
Inches
mm
11 ⁄ 4 – 3
0 – 0.063
0 – 0.031
42,4 – 88,9
0 – 1,6
0 – 0,8
4 – 24
0 – 0.188
0 – 0.094
114,3 – 610,0
0 – 2,4
0 – 2,4
* Roll grooved joints provide half the available
movement of cut grooved joints.
DESIGN DATA
Expansion/Contraction
GRINNELL Flexible Couplings are capable of
accommodating pipe thermal movements provided they
are properly gapped and a sufficient quantity of flexible
couplings are used. Note that flexible couplings will not
accommodate both full maximum linear movement and
the maximum available angular deflection concurrently at
the same joint.
If it is desired to have both deflection and linear
movement available, then the system should have
sufficient flexible joints to accommodate the
requirement.
The deflection published is a maximum
value. For design purposes the
maximum deflection should be reduced
to account for field practices as shown:
Deflection
Pipe Size
Inches
mm
11 ⁄ 4 – 3
42,4 – 88,9
4 – 24
114,3 – 610,0
214
Maximum Pipe
Deflection
Reduction
50%
25%
www.grinnell.com
PRESSURE & DESIGN DATA
Thermal Movement
Tech Data Sheets: G810, G820, G830
The following guidelines are similar to any
expansion joint:
Activation Force
It is recommended that anchors be installed at changes of direction on the pipe lines to
control the pipe movement. The thermal expansion/contraction in the piping system can be
accommodated using GRINNELL Flexible Couplings. In designing anchoring systems, it is
suggested that the following be taken into consideration:
Pipe Size
Inches
mm
Activation Force
lbs
N
11 ⁄ 4
35
42,4
156
• Pressure Thrusts
11 ⁄ 2
45
• Frictional Resistance of Any Guides or Supports
48,3
200
2
70
60,3
311
• Centrifugal Thrust Due to Velocity at Changes of Direction
• Activation Force Required to Compress or Expand a Flexible Coupling
Three methods are available as examples to
accommodate thermal expansion/contraction:
(1) Design the system with rigid couplings
and place expansion joints at the proper
locations. Expansion joints may be a
series of flexible grooved couplings of a
sufficient quantity to accommodate the
movement.
(2) Design the system with flexible and/
or rigid couplings and allow the pipe to
move in directions desired, with the use
of anchors and guides if so required.
With this method, it is important
to ensure that movement at branch
connections, changes of direction,
equipment hookup, etc., will not cause
damage or harmful stresses.
$QFKRU
3RVLWLRQ
([SDQVLRQ
-RLQW)LJ
,QWHUPHGLDWH
*XLGHV
(3) Design the system with flexible couplings
utilizing the expansion/contraction
capabilities of these products.
21 ⁄ 2
100
73,0
645
76,1mm
110
76,1
489
3
145
88,9
645
4
240
114,3
1068
5
375
141,3
1668
165,1mm
500
165,1
2224
6
520
168,3
2313
8
880
219,1
3914
10
1365
273,0
6072
12
1915
323,9
8518
The following example illustrates this method::
• 6" (150mm) Schedule 40 steel pipe, roll grooved,
150' (45,7m) long, anchored at each end
• Maximum Temperature = 200°F (93.3°C)
• Minimum Temperature = 40°F (4.4°C)
• Install Temperature = 80°F (26.6°C)
DESIGN DATA
)OH[LEOH
&RXSOLQJV
$QFKRU
3RVLWLRQ
,QWHUPHGLDWH
*XLGHV
,QWHUPHGLDWH
*XLGHV
Refer to back cover for country-specific customer care numbers.
215
PRESSURE & DESIGN DATA
Thermal Movement
Tech Data Sheets: G810, G820, G830
Directions to calculate the number of couplings required to
compensate for the thermal expansion and contraction of
pipe (by example):
(1) Thermal Contraction
Utilize the Thermal Expansion Table. Allowance for the minimum
installation temperature, in this case 80°F to 40°F (26.6°C to
4.4°C), is calculated as:
80°F = 0.61" per 100'
40°F = 0.30" per 100'
Difference = 0.31" per 100'
For 150' of pipe = 0.31" x 1.5 = 0.47" per 150'
(26.6°C = 15,5mm per 30,5m
4.4°C = 7,6mm per 30,5m
Difference = 7,9mm per 30,5m
For 45,7m of pipe = 7,9mm x 1.5 = 11,9mm per 45,7m)
(2) Thermal Expansion
Utilize the Thermal Expansion Table. Allowance for the minimum
installation temperature, in this case 26.6°C to 93.3°C (80°F to
200°F), is calculated as:
200°F = 1.52" per 100'
80°F = 0.61" per 100'
Difference = 0.91" per 100'
For 150' of pipe = 0.91 x 1.5 = 1.36" per 150'
(93.3°C = 38,6mm per 30,5m
26.6°C = 15,5mm per 30,5m
Difference = 23,1mm per 30,5m
For 45,7m of pipe = 23,1mm x 1.5 = 34,5mm per 45,7m)
(3) Couplings Required
Available linear movement for a 6" (150mm) Figure 707 Flexible
Coupling on roll grooved pipe = 0.094" (2,4mm)
per coupling.
Fully butted together for contraction only. Therefore the number
of Figure 707 Flexible Couplings required:
DESIGN DATA
• 0.47" / 0.094" per coupling = 5.0
(11,9mm / 2,4mm per coupling = 4.96)
• Use 5 Figure 707 couplings for pipe contraction
(b) Fully gapped apart for expansion only. Therefore the number
of Figure 707 Flexible Couplings required:
• 1.36" / 0.094" per coupling = 14.47
(34,5mm / 2,4mm per coupling = 14.38)
• Use 15 Figure 707 Flexible Couplings for pipe expansion
Thermal Expansion of Carbon Steel in Inches/100 Feet
(milliMeters/30.5 Meters)
Between 0°F (-18°C) and Indicated Temperature
Temperature
F°
C°
-40
-40
-30
-34,4
-20
-28,9
-10
-23,3
0
-17,8
10
-12,2
20
-6,7
30
-1,1
40
4,4
50
10,0
60
15,6
70
21,1
80
26,7
90
32,2
100
37,8
110
43,3
120
48,9
130
54,4
140
60,0
150
65,6
160
71,1
170
76,7
180
82,2
190
87,8
200
93,3
210
98,9
220
104,4
230
110,0
Thermal Expansion
Inches/100 Feet
mm/30.5M
-0.30
-7,62
-0.23
-5,84
-0.15
-3,81
-0.08
-2,03
0.00
0,00
0.08
2,03
0.15
3,81
0.23
5,84
0.30
7,62
0.38
9,65
0.46
11,68
0.53
13,46
0.61
15,50
0.68
17,27
0.76
19,30
0.84
21,34
0.91
23,11
0.99
25,15
1.06
26,92
1.14
28,96
1.22
30,99
1.29
32,77
1.37
34,80
1.44
36,58
1.52
38,61
1.60
40,64
1.67
42,42
1.75
44,45
Mean Coef. of thermal expansion = 0.00000633 in/in/°F Source:
ASME B31.9
216
www.grinnell.com
PRESSURE & DESIGN DATA
Misalignment and Deflection
Tech Data Sheets: G810, G820, G830
GRINNELL Flexible Couplings provide for restrained
joints and allow for deflection to aid where the pipe or
equipment is misaligned.
Note that flexible couplings will not accommodate both
full maximum linear movement and the maximum available
angular deflection concurrently at the same joint.
Design Deflection for
Roll Grooved Pipe
Deflection O
(Roll Grooved Pipe)
Pipe Size
Inches
mm
11 ⁄ 4
42,4
11 ⁄ 2
48,3
2
60,3
21 ⁄ 2
73,0
76,1mm
76,1
3
88,9
4
114,3
5
141,3
165,1mm
Flexible couplings are also useful in laying out curved
piping systems.
165,1
6
168,3
8
L
R =
219,1
2
L = (2) (R)
10
2
273,0
12
N=
T
R = Radius of curve
L = Pipe length
323,9
1.08°
0.94°
0.75°
0.62°
0.60°
0.51°
1.19°
0.97°
0.83°
0.81°
0.63°
0.50°
0.42°
Incorporates the recommended safety factor reduction for field
practices (50% for sizes 11 ⁄ 4 – 3" (32mm - 80mm) and 25% for
sizes 4" – 12" (100mm - 300mm)).
DESIGN DATA
If it is desired to have both deflection and linear movement
available, then the system should have sufficient flexible
joints to accommodate the requirement.
Figures
705 &
707
= Deflection from centerline, in degrees,
for each coupling (see table)
N = Number of flexible couplings needed
T = Total deflection, in degrees, required
Refer to back cover for country-specific customer care numbers.
217
PRESSURE & DESIGN DATA
Pipe Support
Tech Data Sheets: G810, G820, G830
All piping systems require that the support system accommodate the weight of the pipe, joint connections, fluid, and other
system components. In addition, consideration may be necessary in reducing stresses, accommodating thermal expansion or
contraction, building settlement, seismic movement, etc. The following tables provide guidelines for grooved steel piping products
without concentrated loads between supports.
Flexible Joints
Rigid Joints
For pipe runs when linear movement is accommodated by the
flexible coupling:
For pipe runs with rigid couplings:
Suggested Maximum Span
Between Supports – Feet Meters
Number of Hangers Per Pipe Length
Pipe Length in Feet Meters
Pipe Size
Inches
mm
3.3
10
3.7
12
4.6
15
6.7
22
7.6
25
9.1
30
10.7 12.2
35
40
Average Number of Hangers Per Pipe Length
11 ⁄ 4 - 2
42,4 – 60,3
21 ⁄ 2 - 4
73,0 – 114,3
5 - 24
141,3 – 609,6
2
2
2
3
4
4
5
II
I
II
7
11
9
11
42,4
2,1
3,4
2,7
3,4
1
Air Service
1 ⁄2
7
12
9
13
2
2
2
2
3
4
4
48,3
2,1
3,7
2,7
4,0
2
10
13
13
15
1
1
2
2
2
3
3
3
60,3
3,0
4,0
4,0
4,6
Distance Between Supports
Nominal Size
Inches
mm
Maximum Distance
Between Supports
Feet
Meters
11 ⁄ 4 - 11 ⁄ 2
12
42,4 - 48,3
3,7
2-8
15
60,3 - 219,1
4,6
10 - 12
16
273,0 - 323,9
4,9
14 - 16
18
355,6 - 406,4
DESIGN DATA
I
11 ⁄ 4
Water Service
1
For pipe runs when linear movement is not required:
5,5
18 - 24
20
457,2 - 609,6
6,1
Note: The requirements of ANSI, ASME or other code groups
may require additional supports.
218
6
Pipe Size
Inches
mm
21 ⁄ 2
11
14
14
16
73,0
3,4
4,3
4,3
4,9
76,1mm
11
14
14
16
76,1
3,4
4,3
4,3
4,9
3
12
15
15
17
88,9
3,7
4,6
4,6
5,2
4
14
17
17
21
114,3
4,3
5,2
5,2
6,4
5
16
19
20
24
141,3
4,9
5,8
6,1
7,3
165,1mm
17
20
21
25
165,1
5,2
6,1
6,4
7,6
6
17
20
21
25
168,3
5,2
6,1
6,4
7,6
8
19
21
24
28
219,1
5,8
6,4
7,3
8,5
10
19
21
24
31
273,0
5,8
6,4
7,3
9,4
12
23
21
30
33
323,9
7,0
6,4
9,1
10,1
14
23
21
30
33
355,6
7,0
6,4
9,1
10,1
16
27
21
35
33
406,4
8,2
6,4
10,7
10,1
18
27
21
35
33
457,2
8,2
6,4
10,7
10,1
20
30
21
39
33
508,0
9,1
6,4
11,9
10,1
24
32
21
42
33
609,6
9,8
6,4
12,8
10,1
www.grinnell.com
PRESSURE & DESIGN DATA
Pipe Support
Tech Data Sheets: G810, G820, G830
Rotational Movement
GRINNELL Flexible Couplings are suitable for use in seismic as well as mining applications. The inherent capability of the flexible
coupling to allow for linear movement, angular deflection, and rotational movement make it an excellent choice for reducing
stresses in a piping system and to increase pipe life in slurry applications.
For mining applications where the pipe needs to be rotated, the system should be depressurized. The pipe coupling bolts/nuts
can be loosened, pipe rotated, the bolts/nuts re-tightened, and the system be put back in service.
Even distribution of pipe wear can be achieved with this method on the inner service of the pipe.
Note: Precautions are necessary to monitor pipe wall thickness to evaluate pressure capability of the pipe with reduced wall.
Linear Movement
Flexible couplings are designed with the couplings keys engaging the pipe without gripping on the bottom of the groove while
still providing for a restrained mechanical joint.
The inherent flexibility of the coupling must be considered when deciding on support arrangements for the piping system as
movement can occur in more than one plane (linear movement, angular deflection, and rotational movement).
DESIGN DATA
Upon system pressurization, each pipe end within the flexible
couplings will expand to the maximum published value. The
coupling keys make contact with the face of the groove and
restrain the joint. In piping systems, this movement will be
accumulative.
Refer to back cover for country-specific customer care numbers.
219
PRESSURE & DESIGN DATA
Pipe Support
Tech Data Sheets: G810, G820, G830
Angular Movement
System movement can be accommodated by providing for sufficient
offset lengths. Temperature increases/decreases can further increase this
movement.
When systems are anchored with partially deflected joints, the system
can move to the fully deflected condition upon pressurization resulting
in the “snaking” of the piping system. Lightweight hangers may not be
suitable to prevent the lateral motion.
Pipe Support
Pipe hanger positioning is important when considering pipe “sagging”
due to the flexible nature of the piping system. Proper positioning of
hangers near the elbow, for example, should be considered.
The use of spring hangers or other methods can be considered to
accommodate vibrations. Base supports, pressure thrust anchors, and
pipe offsets can be used to direct pipe movement.
DESIGN DATA
The use of rigid couplings can be considered to reduce the movement
available with flexible couplings. Consideration of other methods of
accommodation of pipe movements may be required.
220
www.grinnell.com
PRESSURE & DESIGN DATA
Vertical Piping
Tech Data Sheets: G810, G820, G830
Risers comprised of rigid couplings can be considered
instead of welded or flanged systems. Where thermal
movement exists, expansion joints and/or flexible
couplings with offsets may be required.
When using flexible couplings, the movement that occurs in long lengths of
piping needs to be considered. Each joint can move up to the maximum pipe end
separation published. This movement can accumulate and result in the growth of the
piping system, for example at the top. Offsets may be necessary.
Should the riser contain branch connections, the movement which occurs at these
locations with flexible couplings will also need to be considered.
One solution would be to anchor the vertical piping at appropriate locations to
prevent movement which can cause stresses at the branches or equipment. The use
of rigid couplings can be an advantage.
DESIGN DATA
As always, good piping practice should prevail. It is the designer’s responsibility to
select products suitable for the intended service and to ensure that pressure ratings
and performance data is not exceeded. Never remove any piping component or
correct or modify any piping deficiencies without first depressurizing and draining
the system. Material and gasket selection should be verified to be compatible for the
specific application.
Refer to back cover for country-specific customer care numbers.
221
PRESSURE & DESIGN DATA
Maximum Pressure Ratings (psi) on
ANSI 304/316 Stainless Steel
Tech Data Sheets: G810, G820, G830
Pipe Size
Inches
O.D.
mm
Pipe
Schedule
5
1
25
1.315
33,4
10
40
5
11/4
32
1.660
42,4
10
40
5
11/ 2
32
1.900
48,3
10
40
5
2
50
2.375
60,3
10
40
5
1
2 /2
65
2.875
73,0
10
40
5
76,1mm
65
3.000
76,1
10
40
DESIGN DATA
5
3
80
3.500
88,9
10
40
5
4
100
4.500
114,3
10
40
222
Wall Thickness
Inches
mm
Maximum Pressure Rating - psi bar
Figure
Figure
Figure
772
405
472
–
325
–
–
22
–
–
500
–
–
34
–
–
500
–
–
34
–
400
325
200
28
22
14
500
500
300
34
34
21
750
750
600
52
52
41
400
325
200
28
22
14
500
500
300
34
34
21
750
750
600
52
52
41
325
225
200
22
16
14
500
350
300
34
24
21
750
500
600
52
34
41
325
225
200
0.065
1,7
0.109
2,8
0.133
3,4
0.0625
2,0
0.109
2,8
0.140
3,6
0.065
1,7
0.109
2,8
0.145
3,7
0.065
1,7
0.109
2,8
0.154
3,9
0.083
Figure
705
–
–
–
–
–
–
325
22
500
34
500
34
325
22
500
34
500
34
250
17
500
34
500
34
250
Figure
707
400
2,1
17
22
22
16
0.120
3,0
0.203
5,2
0.079
2,0
0.118
3,0
0.205
5,2
0.083
2,1
0.120
3,0
0.216
5,5
0.083
2,1
0.120
3,0
0.237
6,0
400
28
500
34
250
17
300
21
500
34
250
17
300
21
500
34
200
14
300
21
500
34
500
34
750
52
325
22
500
34
500
34
325
22
500
34
500
34
250
17
400
28
750
52
500
34
750
52
325
22
500
34
750
52
325
22
500
34
750
52
250
17
500
34
750
52
350
24
500
34
225
16
350
24
500
34
225
16
350
24
500
34
200
14
300
21
325
22
500
750
400
28
500
34
750
52
400
28
500
34
750
52
325
22
500
34
750
52
325
Figure
770
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
325
22
500
34
700
52
325
Figure
71
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
175
12
275
19
275
19
175
14
22
12
300
21
600
41
200
14
300
21
600
41
200
14
300
21
600
41
200
14
300
21
600
41
500
34
750
52
–
–
–
–
–
–
325
22
500
34
750
52
250
17
400
28
750
52
275
19
275
19
175
12
275
19
275
19
175
12
275
19
275
19
175
12
275
19
275
19
www.grinnell.com
PRESSURE & DESIGN DATA
Maximum Pressure Ratings (psi) on
ANSI 304/316 Stainless Steel (cont.)
Pipe Size
Inches
O.D.
mm
Pipe
Schedule
5
139,7mm
125
5.500
139,7
10
40
5
5
125
5.563
141,3
10
40
5
165,1mm
150
6.500
165,1
10
40
5
6
150
6.625
168,3
10
40
5
8
200
8.625
219,1
10
40
5
10
250
10.750
273,0
10
40
5
12
300
12.750
323,9
10
40
Wall Thickness
Inches
mm
Maximum Pressure Rating - psi bar
Figure
Figure
Figure
772
405
472
250
200
200
17
14
14
500
300
300
34
21
21
750
325
600
52
22
41
200
125
200
145
9
14
300
200
300
21
14
21
500
200
600
34
14
41
200
125
200
14
9
14
300
200
300
21
14
21
500
200
600
34
14
41
200
125
200
14
9
14
200
200
300
14
14
21
450
200
600
31
14
41
200
50
200
0.109
2,8
0.134
3,4
0.258
6,6
0.118
3,0
0.201
5,1
0.252
6,4
0.109
2,8
0.134
3,4
0.280
7,1
0.118
3,0
0.201
5,1
0.252
6,4
0.109
Figure
705
200
14
300
21
500
34
125
9
200
14
300
21
125
9
200
14
300
21
75
5
200
14
300
21
50
Figure
707
–
–
–
–
–
–
200
14
300
21
500
34
200
14
300
21
500
34
125
9
200
14
500
34
75
2,8
3
5
14
3
0.148
3,8
0.322
8,2
0.134
3,4
0.165
4,2
0.365
9,3
0.156
4,0
0.180
4,6
0.375
9,5
75
5
300
21
N/R
125
9
400
28
N/R
300
21
400
28
N/R
75
5
75
5
N/R
75
5
325
22
N/R
75
5
325
22
N/R
50
3
50
3
125
9
250
17
125
9
250
17
75
5
200
14
–
–
–
–
–
–
–
–
–
–
–
–
Figure
770
–
–
–
–
–
–
200
14
300
21
750
52
–
–
–
–
–
–
125
9
300
21
750
52
75
Figure
71
175
12
275
19
275
19
125
9
200
14
250
17
125
9
200
14
250
17
75
5
125
14
150
10
N/R
14
5
N/R
300
21
600
41
N/R
300
21
600
41
N/R
75
5
125
9
N/R
300
21
600
41
N/R
300
21
600
41
N/R
75
5
125
9
N/R
125
9
300
21
250
17
600
41
50
3
125
9
DESIGN DATA
Tech Data Sheets: G810, G820, G830
For parts installed in accordance with Bureau Veritas rules and regulations, a one-time only field-test is required to a maximum
working pressure of 1-1/2 times the rated pressure, as per BV NR 467, Pt. C, Ch. 1, Sec. 10, [20.4.2.], where applicable.
Tests are to be attended by a local BV Surveyor. Refer to the specific technical data sheet for coupling pressure ratings. Grooved
fittings described in this document that meet BV Approval include Figures: 71, 201, 210, 219, 260, 301, 303, 311, 312,
321,327, 341, 350, 522, 577, 705, 707, 716, 730, and 772.
Refer to back cover for country-specific customer care numbers.
223
PRESSURE & DESIGN DATA
Global Pipe Size Designations
GRINNELL Mechanical Products product data is utilized worldwide and all technical data is shown in both metric and imperial
terms. The following chart shows a comparison between typical metric and IPS pipe sizes.
Nominal Size (DN)
Inches
(Imperial)
1
⁄2
⁄4
1
11 ⁄ 4
11 ⁄ 2
2
15
20
25
32
40
50
21 ⁄ 2
65
3
DESIGN DATA
mm
(Metric)
Outside Diameter (OD)
mm
(Specification
Reference)
DIN
mm
BS
mm
ISO
mm
JIS
mm
21,3mm
26,7mm
33,4mm
42,2mm
48,3mm
60,3mm
73,1mm
76,1mm BS/ISO
DN 15
26,9mm
33,7mm
42,4mm
DN 40
DN 50
–
76,1mm
DN 15
DN 20
DN 25
DN 32
DN 40
DN 50
–
76,1mm
DN 15
DN 20
DN 25
DN 32
DN 40
DN 50
–
76,1mm
21,7mm
27,2mm
34mm
42,7mm
48,6mm
60,5mm
–
76,3mm
India
GB
China
mm
IS 1239
IS3589
⁄2
⁄4
1
11 ⁄ 4
11 ⁄ 2
2
21 ⁄ 2
–
DN 15
DN 20
DN 25
DN 32
DN 40
DN 50
–
76,1mm **
DN 15
DN 20
DN 25
DN 32
DN 40
DN 50
–
76,1mm
–
–
–
–
–
–
–
–
ANSI
Inches
1
3
3
80
88,9mm
DN 80
DN 80
DN 80
DN 80
3
DN 80
DN 80
–
31 ⁄ 2
90
–
–
–
–
–
–
100
–
–
–
–
108mm **
–
–
–
127mm
5
125
–
152,4mm
150
–
–
175
203,2mm
8
200
–
254mm
DN 100
–
–
139,7mm
–
–
–
165,1mm
–
–
–
–
DN 200
–
DN 101
–
–
139,7mm
–
–
–
–
DN 150
–
–
–
DN 200
–
DN 100
–
–
139,8mm
–
–
–
165,2mm
–
–
–
216,3mm
–
–
4
–
–
–
5
–
–
–
6
–
–
–
8
–
DN 100
–
133mm **
139,7mm
–
–
159mm
–
DN 150
–
–
–
DN 200
–
DN 100
–
–
139,7mm
–
–
–
165,1mm
–
–
–
–
DN 200
–
–
–
–
–
–
–
6
–
DIN
133mm
DN 100
–
–
DN 125
–
–
–
–
DN 150
–
–
–
DN 200
–
–
4
101,6mm
108mm China
(& old DIN)
114,3mm
127mm
133mm China
139,7mm BS/ISO
141,3mm
152,4mm
159mm China
165,1mm JIS/BS
168,3mm
193,7mm
203,2mm
216,3mm JIS
219,1mm
254mm
10
250
–
304,8mm
12
300
14
350
16
400
18
450
20
500
22
550
24
600
–
DN 150
193,7mm
–
–
DN 200
–
267,4mm JIS
–
–
–
267,4mm
–
–
–
–
273mm
304,8mm
318,5mm JIS
323,9mm
355,6mm
377mm China
406,4mm
426mm China
457,2mm
480mm China
508mm
530mm China
558,8mm
580mm China
610mm
630mm China
DN 250
–
–
DN 300
DN 350
–
DN 400
–
DN 450
–
DN 500
–
–
–
DN 600
–
DN 250
–
–
DN 300
DN 350
–
DN 400
–
DN 450
–
DN 500
–
–
–
DN 600
–
DN 250
–
–
DN 300
DN 350
–
DN 400
–
DN 450
–
DN 500
–
–
–
DN 600
–
–
–
318,5mm
–
DN 350
–
DN 400
–
DN 450
–
DN 500
–
DN 550
–
DN 600
–
10
–
–
12
14
–
16
–
18
–
20
–
22
–
24
–
DN 250
–
–
–
DN 350
377mm
DN 400
426mm
DN 450
480mm
DN 500
530mm
559mm
580mm
DN 600
630mm
DN 250
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
DN 250
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
IMPORTANT NOTE:
Nominal designations are used where the actual OD of the pipe matches the ANSI size.
Otherwise both the nominal and actual OD are listed.
China sizes are listed as actual OD in mm.
** China sizes are tubing sizes.
224
www.grinnell.com
PRESSURE & DESIGN DATA
Metric/Imperial Conversion Chart
This chart is provided as a guide for converting metric and imperial measurements.
Convert Metric to Imperial
Millimeters
(mm)
Meters
(m)
Kilograms
(kg)
Grams
(g)
Kilopascals
(kPa)
Bar
X
0.03937
X
3.281
X
2.205
X
0.03527
X
0.145
X
14.5
X
0.2248
X
0.738
C + 17.78 × 1.8
X
1.341 × 10-3
X
0.2642
X
264.2
(psi)
Pressure
(psi)
End Load
(lb)
Torque
(lbft)
Temp.
(°F)
Horsepower
(hp)
Gal. per Min.
(gpm)
10 -3 Gal. per Min.
(gpm)
X
25,4
X
0,3048
X
0,4536
X
28,35
X
6,894
X
0,069
X
4,45
X
1,356
F – 32 ÷ 1,8
X
745,7
X
3,785
X
3,7865
DESIGN DATA
Newtons
(N)
Newton Meters
(N•m)
Celsius
(°C)
Watts
(w)
Liters per min.
(L/M)
Cubic Meters per min.
(m3/m)
Convert Imperial to Metric
Inches
(in)
Feet
(ft)
Pounds
(lb)
Ounces
(oz)
Pressure
Refer to back cover for country-specific customer care numbers.
225
PRESSURE & DESIGN DATA
Flange Drilling Specifications
“A” Dimension
Bolt Circle Diameter
“B” Dimension
Bolt Hole Diameter
Quantity “N”
Number of Bolt Holes
Valve Size
DESIGN DATA
Nominal
Inches
mm
2
50
21 ⁄ 2
65
3
80
4
100
5
125
6
150
8
200
10
250
12
300
14
350
16
400
18
450
20
500
24
600
O.D.
Inches
mm
2.375
60,3
2.875
73,0
3.500
88,9
4.500
114,3
5.563
141,3
6.625
168,3
8.625
219,1
10.750
273,0
12.750
323,9
14.000
355,6
16.000
406,4
18.000
457,2
20.000
508,0
24.000
609,6
ANSI B16.1
(Class 125#) 1
A
B
4.75
120,6
5.50
139,7
6.00
152,4
7.50
190,5
8.50
215,9
9.50
241,3
11.75
298,5
14.25
362,0
17.00
431,8
18.76
476,5
21.25
539,8
22.75
577,9
25.00
635,0
29.50
749,3
0.75
19,0
0.75
19,0
0.75
19,0
0.75
19,1
0.88
22,4
0.88
22,4
0.88
22,2
1.00
25,4
1.00
25,4
1.12
28,4
1.12
28,4
1.25
31,8
1.25
31,8
1.38
35,1
ISO 2084
(PN10) 2
Qty.
N
4
4
4
8
8
8
8
12
12
12
16
16
20
20
A
B
4.92
125,0
5.71
145,0
6.30
160,0
7.09
180,0
8.27
210,0
9.45
240,0
11.61
295,0
13.78
350,0
15.75
400,0
18.11
460,0
20.28
515,0
22.24
565,0
24.41
620,0
28.54
725,0
0.71
18,0
0.71
18,0
0.71
18,0
0.71
18,0
0.71
18,0
0.87
22,0
0.87
22,0
0.87
22,0
0.87
22,0
0.87
22,0
1.02
26,0
1.02
26,0
1.02
26,0
1.18
30,0
ISO 2084
(PN16) 3
Dimensions - Inches mm
Qty.
N
4
4
8
8
8
8
8
12
12
16
16
20
20
20
1
Same drilling as for B16.5 (Class 150#) and B16.42 (Class 250#).
2
Same drilling as for BS 4504 Section 3.2 (PN10) and DIN 2532 (PN10).
A
B
4.92
125,0
5.71
145,0
6.30
160,0
7.09
180,0
8.27
210,0
9.45
240,0
11.61
295,0
13.98
355,0
16.14
410,0
18.50
470,0
20.67
525,0
23.03
585,0
25.59
650,0
30.31
770,0
0.71
18,0
0.71
18,0
0.71
18,0
0.71
18,0
0.71
18,0
0.87
22,0
0.87
22,0
1.02
26,0
1.02
26,0
1.02
26,0
1.18
30,0
1.18
30,0
1.30
33,0
1.42
36,0
Qty.
N
4
4
8
8
8
8
12
12
12
16
16
20
20
20
JIS B 2210
(10K)
A
B
4.72
120,0
5.51
140,0
5.91
150,0
6.89
175,0
8.27
210,0
9.45
240,0
11.42
290,0
13.98
355,0
15.75
400,0
17.52
445,0
20.08
510,0
22.24
565,0
24.41
620,0
28.74
730,0
0.75
19,0
0.75
19,0
0.75
19,0
0.75
19,0
0.91
23,0
0.91
23,0
0.91
23,0
0.87
22,0
0.98
25,0
0.98
25,0
1.06
27,0
1.06
27,0
1.06
27,0
1.30
33,0
AS 2129
(Table E)
Qty.
N
4
4
8
8
8
8
12
12
16
16
16
20
20
24
A
B
4.49
114,0
5.00
127,0
5.75
146,0
7.00
178,0
8.27
210,0
9.25
235,0
11.50
292,0
14.02
356,0
15.98
406,0
18.50
470,0
20.51
521,0
22.99
584,0
25.24
641,0
29.76
756,0
0.71
18,0
0.71
18,0
0.71
18,0
0.71
18,0
0.71
18,0
0.87
22,0
0.87
22,0
0.87
22,0
1.02
26,0
1.02
26,0
1.02
26,0
1.02
26,0
1.02
26,0
1.30
33,0
Qty.
N
4
4
4
8
8
8
8
12
12
12
12
16
16
16
3
Same drilling as for BS 4504 Section 3.2 (PN16) and DIN 2532 (PN16).
For additional information, contact GRINNELL Mechanical Products.
226
www.grinnell.com
227
GRINNELL MECHANICAL SERVICES
Supporting Your Mechanical Business...
From Design... To Build
GRINNELL Mechanical Services, a department of GRINNELL Mechanical Products, works with engineers and contractors to
create the most cost-effective and time-efficient piping solutions from design…to build.
Common Challenges You Face
• High Material Handling Costs
• Piping Interferences and Clashes
• Material Backorders
• Space Constraints
• High Installation Costs
• Lack of Skilled Labor
• Excessive Material Leftovers
• Compressed Delivery Schedules
Solutions We Provide
Our Mechanical Design Department provides a strategic extension of your
own design team.
Our Project Planning jump-starts your design process, reducing indirect
operations at the job site while identifying conflicts between your project
documents.
Our Virtual Layout Process helps to identify interferences and space
constraints before they become work-delay issues.
Our Building Information Modeling Expertise supports your BIM drafting
and coordination. We deliver 3D Modeling in your preferred project format for
clash detection.
MECH. SERVICES
Our Design Flexibility incorporates the best joining technology available for
your specific need by using grooved systems with combinations of welded,
flanged, and pressed connections.
228
www.grinnell.com
GRINNELL MECHANICAL SERVICES
Results We Deliver
Shop Drawings - This service creates easy-to-follow, tagged 3D
Isometric Drawings with complete Bill of Material (BOM) tables and
fully dimensioned piping plans of your mechanical equipment rooms.
We provide pipe cut lengths to minimize field cutting and fitting and to
simplify your installations.
Pump Assemblies and Equipment Connections - Our
3D Modeling with tagged BOM tables provides clear, accurate
representations of grooved piping hook-ups. Based on equipment
submittals and bid drawings (flow diagrams, HVAC details, and plan
views), we create detailed assemblies that you can use for submittals,
reviews, and assembly instructions.
Cost Comparisons - Using industry-standard, man-hour data
estimations and our BOMs, we compare the cost savings of grooved
piping solutions over traditional welded/flanged joining methods. By
utilizing the benefits of grooved piping, our technical experts recommend
ways to save you money.
Crate and Tag Handling - We provide an effective material handling
process to help increase your labor productivity by 25% or more. We
deliver complete, tagged pump or equipment hook-up BOMs directly to
equipment rooms for easy access, eliminating your need to reference
multiple shipments and back orders and reducing your material waste
and overages.
Thermal Movement Analyzes - We assist specifiers and installers on
the proper use of grooved couplings for thermal expansion compensation
in piping systems. Our in-depth assessments of your systems offer costeffective design solutions, reduce rework, and help you meet project
performance requirements.
CAD Blocks and Families - We offer traditional AutoCAD* blocks,
AutoCAD MEP parametric block catalogs, and Revit* families with
manageable file sizes, accurate dimensions, and part numbers to save
you time and money.
Training - In a state-of-the-art educational facility, our training includes
informative classroom lectures on leading industry technologies, hands-on
demonstrations of grooved products, and on-site performance testing of
product assemblies.
MECH. SERVICES
Technical Expertise - We provide direct access to the individuals who
design, test, and build our products every day. Contact us; we’ll be glad
to assist you.
* AutoCAD is a registered trademark of Autodesk, Inc.
* Revit is a registered trademark of Autodesk, Inc.
Refer to back cover for country-specific customer care numbers.
229
GRINNELL MECHANICAL SERVICES
Training
Technical Expertise
MECH. SERVICES
Design Work
230
www.grinnell.com
231
INDICES
INDICES
Figure Number Index
Figure Number ................................................ Page
Figure Number ................................................ Page
61 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
341 & 342 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
71 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 - 32
343 & 344 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
201 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
372 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
201LR & 301LR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
380 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
210 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
391, 392, & 393 . . . . . . . . . . . . . . . . . . . . . . . . . . 61
210LR & 310LR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
395 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
211 & 311 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
397, 398, & 399 . . . . . . . . . . . . . . . . . . . . . . . . . . 62
212 & 312 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
401 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
219 & 319 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
405 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
221 & 321 . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 - 50
407 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
227 & 327 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
407GG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
250 & 350 . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 - 55
407GT & 407T . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
251 & 351 . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 - 58
408 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
260 & 360 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
410 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
301-3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
419 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
301-5D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
421 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
301-6D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
441 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
303-3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
442 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
303-5D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
450 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
303-6D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
451 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
306-3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
460 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
306-5D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
466 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
306-6D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
467 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
308 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90 - 91
468 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
310-3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
469 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
310-5D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
470 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
310-6D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
471 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
311-3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
472 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
311-5D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
473 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
311-6D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
474 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
312-3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
475 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
312-5D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
476 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
312-6D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
478 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
314 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
479 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
315 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
484 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
316 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
485 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
320 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
590 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94 - 95
323 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 - 52
601 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
324 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
610 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
325 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 - 67
618 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
330 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68 - 69
619 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
331 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
621 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
232
www.grinnell.com
INDICES
Figure Number ................................................ Page
Keywords ....................................................... Page
640 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
4031 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
650 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
4033 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
652 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
4037 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
660 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
4040 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
672 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
7550 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 - 116
702 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 - 27
9094 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
705 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
9095 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
707 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 - 21
9097 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
716 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
72899 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
730 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 - 82
72900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
770 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
72901 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
772 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 - 19
72904 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
780 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
72905 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
901 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
72906 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
901LR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
72907 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
909 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
72908 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
910 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
72909 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
910LR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
72910 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
914 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
72911 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
919 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
72912 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
921 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
72913 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
924 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
72914 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
927 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
72915 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
941 & 942 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
72916 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
960 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
72917 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
991, 992, & 993 . . . . . . . . . . . . . . . . . . . . . . . . . 153
72918 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
72919 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
72930 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
1012 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
72940 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
1022 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
72999 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
1023 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
B302 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 - 89
1034 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
B680 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
1039 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
B8101 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
1039-66 . . . . . . . . . . . . . . . . . . . . . . . . . . . 130, 207
B8200L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
1041 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
BV835 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92 - 93
1066 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
CB800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99 - 104
1112 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
S810 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 - 109
2021 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
S853 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
2050 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
S855 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
2112 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
TD830 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
INDICES
Figure Number Index
3013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
4000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Refer to back cover for country-specific customer care numbers.
233
INDICES
Product Name Indices
Product Name ................................................................................................................................. Page
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211 - 212
ANSI 304/316 Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .222 - 223
Automated Roll Groovers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208 - 209
CB800 Circuit Balancing Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Figure 61 Flange Adapter (ANSI Class 125/150) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Figure 71 Flange Adapters (ANSI Class 125/150) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 - 29
Figure 71 Flange Adapters (AS2129 Table E) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Figure 71 Flange Adapters (PN10/PN16) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 - 31
Figure 201 45° Cast Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Figure 201LR & 301LR, 45° Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Figure 210 90° Cast Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Figure 210LR & 310LR, 90° Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Figure 211 & 311 , 111⁄4° Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Figure 212 & 312 , 221⁄2° Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Figure 219 & 319 Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Figure 221 & 321 Reducing Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 - 51
Figure 227 & 327 Crosses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Figure 250 & 350 Concentric Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 - 55
Figure 251 & 351 Eccentric Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 - 58
Figure 260 & 360 End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Figure 314 45° Laterals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Figure 315 90° Elbows (Groove x Male Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Figure 316 Reducing Base Support Elbow (Groove x Flange) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Figure 320 Tees (Groove x Groove x Male Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Figure 323 Reducing Tees (Groove x Groove x Male Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 - 52
Figure 324 90° True Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Figure 325 45° Reducing Laterals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 - 67
Figure 330 Tee Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 - 69
Figure 331 Reducing Tee Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Figure 341 Flange Adapters (ANSI Class 150#) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Figure 342 Flange Adapters (ANSI Class 300#) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Figure 343 Flange Adapters (ANSI Class 150#) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Figure 344 Flange Adapters (ANSI Class 300#) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Figure 372 Concentric Reducers (Small End Male Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Figure 380 Female Thread Adapters (Groove x Female Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Figure 391, 392 & 393 Adapter Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Figure 395 Hose Adapter Nipples (Groove x Hose) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Figure 397, 398 & 399 Concentric Swaged Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Figure 401 45° Stainless Steel Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Figure 405 Stainless Steel Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Figure 407 Straight Couplings (Press x Press) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
INDICES
Figure 407GG Dielectric Waterway Transition Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Figure 407GT & 407T Dielectric Waterways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Figure 408 Slip Couplings (Press x Press) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Figure 410 90° Stainless Steel Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Figure 419 Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
234
www.grinnell.com
INDICES
Product Name Indices
Product Name ................................................................................................................................. Page
Figure 421 Reducing Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Figure 441 Flange Adapters (ANSI Class 150#) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Figure 442 Equal Tees (Press x Press x Press) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Figure 450 Concentric Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Figure 451 Eccentric Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Figure 460 End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Figure 466 Van Stone Flange Adapters (Female Press x Flange) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Figure 467 90° Elbows (Male x Female) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Figure 468 90° Elbows (Press x Press) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Figure 469 Ball Valves (Press x Press) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Figure 470 45° Elbows (Male x Female) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Figure 471 45° Elbows (Press x Press) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Figure 472 Stainless Steel Rigid Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Figure 473 Reducing Tees (Press x Press x Press) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Figure 474 Reducers (Female Press x Male Press) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Figure 475 Flange Adapters (Female Press x Flange) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Figure 476 Straight Connectors (Female Press x Male NPT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Figure 478 Tee and Reducing Tee Adapters (Press x Press x Female NPT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Figure 479 Straight Connectors (Female Press x Female NPT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Figure 484 End Caps (Female Press) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Figure 485 3-Piece Unions (Press x Press) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Figure 601 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Figure 610 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Figure 618 Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Figure 619 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Figure 621 Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Figure 640 Pivot-Bolt Rigid Installation-Ready Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Figure 650, Concentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Figure 652, Concentric Reducer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Figure 660 Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Figure 672 Rigid Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Figure 702 Mechanical Outlet Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Figure 702 Mechanical Outlet Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Figure 705 Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Figure 707 Heavy Duty Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 - 21
Figure 716 Flexible Reducing Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Figure 72899 Replacement Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Figure 72900 SDR Pipe (Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
Figure 72901 SDR Pipe with Coupling (Male Spline x Female Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179
Figure 72904 Couplings (Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Figure 72905 Couplings (Spline x Solvent Weld) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
INDICES
Figure 72906 Nipples (Spline x Plain End) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Figure 72907 Nipples (Spline x Groove) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Figure 72908 Nipples (Spline x Male Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
Figure 72909 Nipples (Plain End x Male Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Figure 72910 90° Elbows (Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Refer to back cover for country-specific customer care numbers.
235
INDICES
Product Name Indices
Product Name ................................................................................................................................. Page
Figure 72911 Nipples (Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Figure 72912 45° Elbows (Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Figure 72913 90° Sweep Elbows (Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
Figure 72914 45° Sweep Elbows (Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
Figure 72915 Caps & Plugs (Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
Figure 72916 Flange Adapters (Spline x Flange 150psi) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
Figure 72917 Tees (Spline x Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
Figure 72918 Reducing Tees (Spline x Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
Figure 72919 Reducing Couplings (Male Spline x Female Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Figure 72930 Outlet Couplings (Spline x Spline x Female Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Figure 72940 Outlet Couplings (Male Spline x Female Spline x Female Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Figure 72999 Splines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Figure 730 Mechanical Tees & Crosses – Grooved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 - 82
Figure 730 Mechanical Tees & Crosses – Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 - 79
Figure 7550 Expansion Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111 - 116
Figure 770 High Pressure Rigid Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Figure 772 Rigid Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 - 19
Figure 780 Grooved Snap Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Figure 901 45° Plain End Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Figure 901LR 45° Plain End Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Figure 909 Plain End Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Figure 9094 Flange Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Figure 9095 HDPE Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
Figure 9097 HDPE Transition Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Figure 910 90° Plain End Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Figure 910LR 90° Plain End Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Figure 914 Plain End Laterals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Figure 919 Plain End Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Figure 921 Plain End Reducing Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Figure 924 Plain End True Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Figure 927 Plain End Crosses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Figure 941 Plain End Flange Adapters (ANSI Class 150#) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Figure 942 Plain End Flange Adapters (ANSI Class 300#) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Figure 960 Plain End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Figure 991, 992, 993 Plain End Adapter Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Figure 999 Plain End Swaged Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Figure ITGM Insertion Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Figure S810 Suction Diffusers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108 - 109
Figure S853 “Y” Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Figure S855 Tee Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Flange Adapter Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
INDICES
Flexible Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
Gasket Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
G-MINE PVC Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
GRINNELL Gasket Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
GRINNELL Gasket Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
236
www.grinnell.com
INDICES
Product Name Indices
Product Name ................................................................................................................................. Page
Long Radius 3D Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Long Radius 5D Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Long Radius 6D Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
MINI-MITES Field Portable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Model 1000 Portable Cut Groover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
Model 1012 Portable Roll Groovers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
Model 1022 Portable Roll Groovers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
Model 1023 Portable Roll Groovers With Electric Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Model 1034 MINI-MITES Field Portable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Model 1039 MINI-MITES Field Portable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Model 1039-66 Copper Roll Groover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Model 1039-66 MINI-MITES Field Portable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Model 1041 Portable Roll Groovers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
Model 1066 MINI-MITES Field Portable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Model 1112 Portable Roll Groovers With Electric Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Model 2021 Automated Roll Groovers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
Model 2050 Automated Roll Groovers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Model 2112 Automated Roll Groovers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209
Model 3013 Porta-Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
Model 308 Butterfly Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 - 91
Model 4031 Pipe Support Stands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Model 4037 Nipple Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
Model 590 Grooved End Check Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 - 95
Model B302 Grooved End Butterfly Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 - 88
Model B680 Butterfly Valve with Lever Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Model B8101 Low Profile Butterfly Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Model B8200L G-MINE Butterfly Valves (Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Model BV835 Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 - 93
Model CB800 Circuit Balancing Valves, Flanged Ends, ANSI Class 125# . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Model CB800 Circuit Balancing Valves, Flanged Ends, PN16/PN10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Model CB800 Circuit Balancing Valves, Grooved Ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Model CB800 Circuit Balancing Valves, Insulation Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Model CB800 Circuit Balancing Valves, MC2 Measuring Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Model CB800 Circuit Balancing Valves, Solder Ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Model CB800 Circuit Balancing Valves, Threaded Ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Model TD830 Triple Duty Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Pipe Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .218 - 220
Pipe Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
Portable Roll Groovers For Ridgid® 300 Pipe Threader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
Portable Roll Groovers With Electric Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204
Rigid Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
INDICES
Thermal Movement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215 - 216
Vertical Piping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
Refer to back cover for country-specific customer care numbers.
237
INDICES
Keyword Indices
INDICES
Keywords ....................................................................................................................................... Page
“Y” Strainers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
111⁄4° Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
221⁄2° Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
3-Piece Unions (Press x Press) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
45° Cast Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
45° Elbows (Male x Female) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
45° Elbows (Press x Press) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
45° Elbows (Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
45° Laterals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
45° Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
45° Plain End Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
45° Plain End Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
45° Reducing Laterals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 - 67
45° Stainless Steel Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
45° Sweep Elbows (Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
90° Cast Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
90° Elbows (Groove x Male Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
90° Elbows (Male x Female) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
90° Elbows (Press x Press) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
90° Elbows (Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
90° Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
90° Plain End Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
90° Plain End Long Radius Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
90° Stainless Steel Elbows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
90° Sweep Elbows (Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
90° True Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211 - 212
Adapter Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Adapter Nipples, Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
ANSI 304/316 Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .222 - 223
Automated Roll Groovers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208 - 209
Ball Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 - 93
Ball Valves (Press x Press) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Butterfly Valve with Lever Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Butterfly Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 - 91
Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Caps & Plugs (Spline). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
Caps, End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 138
Caps, End (Female Press) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Caps, Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Cast Elbows, 45° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Cast Elbows, 90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Circuit Balancing Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 - 104
Circuit Balancing Valves, Flanged Ends, ANSI Class 125# . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Circuit Balancing Valves, Flanged Ends, PN16/PN10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Circuit Balancing Valves, Grooved Ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Circuit Balancing Valves, Insulation Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Circuit Balancing Valves, MC2 Measuring Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Circuit Balancing Valves, Solder Ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
238
www.grinnell.com
INDICES
Keywords ....................................................................................................................................... Page
Circuit Balancing Valves, Threaded Ends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Concentric Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 - 55, 127, 140
Concentric Reducers (Small End Male Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Concentric Swaged Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Connectors, Straight (Female Press x Female NPT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Connectors, Straight (Female Press x Male NPT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Copper Roll Groover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Coupling Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Couplings (Spline x Solvent Weld) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Couplings (Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Couplings, Flexible Reducing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Couplings, Outlet (Male Spline x Female Spline x Female Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181
Couplings, Outlet (Spline x Spline x Female Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
Couplings, Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Couplings, Rigid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 - 19, 121
Couplings, Slip (Press x Press) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Couplings, Stainless Steel Flexible . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Couplings, Stainless Steel Rigid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Crosses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Crosses, Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Cut Groove Standard Specification for Steel & Other IPS Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Cut Groover, Portable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
Dielectric Waterway Transition Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Dielectric Waterways . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Eccentric Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 - 58, 141
Elbows, 111⁄4° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Elbows, 221⁄2° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Elbows, 45° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39, 123, 136, 147 - 148, 161, 185 - 186
Elbows, 45° Cast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Elbows, 45° Long Radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Elbows, 45° Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Elbows, 45° Plain End Long Radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Elbows, 45° Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Elbows, 45° Sweep (Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
Elbows, 90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38, 42, 123, 136, 147 - 148, 160, & 185 - 186
Elbows, 90° (Groove x Male Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Elbows, 90° (Male x Female) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Elbows, 90° (Press x Press) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Elbows, 90° (Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Elbows, 90° Cast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Elbows, 90° Long Radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Elbows, 90° Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Elbows, 90° Plain End Long Radius . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Elbows, 90° Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Elbows, 90° Sweep (Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186
End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 138
End Caps (Female Press) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Equal Tees (Press x Press x Press) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Expansion Joint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111 - 116
Female Thread Adapters (Groove x Female Thread) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Refer to back cover for country-specific customer care numbers.
239
INDICES
Keyword Indices
INDICES
Keyword Indices
Keywords ....................................................................................................................................... Page
INDICES
Figure ITGM Insertion Tools . . . . . . . . . . . . . . . . . . . . . .
Fitting Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .
Flange Adapter (ANSI Class 125/150) . . . . . . . . . . . . .
Flange Adapter Washers . . . . . . . . . . . . . . . . . . . . . . .
Flange Adapters (Spline x Flange 150psi) . . . . . . . . . . . .
Flange Adapters (ANSI Class 125/150) . . . . . . . . . . . . .
Flange Adapters (ANSI Class 150# & ANSI Class 300#) .
Flange Adapters (PN16 & PN16 BS 4504) . . . . . . . . . . .
Flange Adapters (ANSI Class 150#) . . . . . . . . . . . . . . .
Flange Adapters (AS2129 Table E) . . . . . . . . . . . . . . . .
Flange Adapters (Female Press x Flange) . . . . . . . . . . . .
Flange Adapters (PN10/PN16) . . . . . . . . . . . . . . . . . . .
Flange Adapters, Plain End . . . . . . . . . . . . . . . . . . . . .
Flange Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flange Drilling Specifications . . . . . . . . . . . . . . . . . . . .
Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flexible Couplings, Stainless Steel . . . . . . . . . . . . . . . .
Flexible Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flexible Reducing Couplings . . . . . . . . . . . . . . . . . . . . .
Gasket Air, Water & Chemical Recommendations . . . . . . .
Gasket Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Global Pipe Size Designations . . . . . . . . . . . . . . . . . . .
G-MINE Butterfly Valves (Spline x Spline) . . . . . . . . . . . .
G-MINE PVC Systems . . . . . . . . . . . . . . . . . . . . . . . . . .
GRINNELL Gasket Grade & Recommendations . . . . . . . . .
GRINNELL Gasket Lubricants . . . . . . . . . . . . . . . . . . . . .
GRINNELL Gasket Types . . . . . . . . . . . . . . . . . . . . . . . .
GRINNELL Website . . . . . . . . . . . . . . . . . . . . . . . . . . .
Grooved End Butterfly Valves . . . . . . . . . . . . . . . . . . . .
Grooved End Butterfly Valves - Options . . . . . . . . . . . . . .
Grooved End Check Valves . . . . . . . . . . . . . . . . . . . . . .
Grooved Snap Couplings . . . . . . . . . . . . . . . . . . . . . . .
HDPE Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HDPE Pipe Wall Thickness and Standard Dimension Ratios
HDPE Transition Couplings . . . . . . . . . . . . . . . . . . . . . .
Heavy Duty Flexible Couplings . . . . . . . . . . . . . . . . . . .
High Pressure Rigid Couplings . . . . . . . . . . . . . . . . . . . .
Hose Adapter Nipples (Groove x Hose) . . . . . . . . . . . . .
Joint, Expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Joints, Flexible or Rigid . . . . . . . . . . . . . . . . . . . . . . . .
Laterals, 45° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Laterals, 45° Reducing . . . . . . . . . . . . . . . . . . . . . . . .
Laterals, 45° Reducing . . . . . . . . . . . . . . . . . . . . . . . .
Laterals, Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . .
Long Radius 3D Elbows . . . . . . . . . . . . . . . . . . . . . . . .
Long Radius 5D Elbows . . . . . . . . . . . . . . . . . . . . . . . .
Long Radius 6D Elbows . . . . . . . . . . . . . . . . . . . . . . . .
Low Profile Butterfly Valves . . . . . . . . . . . . . . . . . . . . . .
Maximum Pressure Ratings (psi) on . . . . . . . . . . . . . . . .
Maximum Pressure Ratings (psi) on . . . . . . . . . . . . . . . .
Mechanical Outlet Couplings . . . . . . . . . . . . . . . . . . . .
240
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . 190
. . . . . 119
. . . . . 122
. . . . . . 33
. . . . . 187
. . 28 - 29
. . . . . . 73
. . . . . . 74
. . . . . 142
. . . . . . 32
. . . . . 167
. . 30 - 31
. . . . . 154
. . . . . 173
. . . . . 226
. . . . . . 22
. . . . . 135
. 214, 218
. . . . . . 24
.195 - 197
. . . . . 193
. . . . . 224
. . . . . 189
. . . . . 177
. . . . . 194
. . . . . 198
. . . . . 192
. . . . . . 14
. . 86 - 88
. . . . . . 89
. . 94 - 95
. . . . . . 25
. . . . . 171
. . . . . 174
. . . . . 172
. . 20 - 21
. . . . . . 23
. . . . . . 60
.111 - 116
. 214, 218
. . . . . . 64
. . 65 - 67
. . 65 - 67
. . . . . 151
. . . . . . 43
. . . . . . 44
. . . . . . 45
. . . . . . 85
. . . . . 222
. . . . . 223
. . 26 - 27
www.grinnell.com
INDICES
Keyword Indices
Keywords ....................................................................................................................................... Page
Refer to back cover for country-specific customer care numbers.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . . . . . . . . 80 - 82
. . . . . . . . . . . . 77 - 79
. . . . . . . . . . . . . . . 225
. . . . . . . . . . . . . . . 207
. . . . . . . . . . . . . . . 217
. . . . . . . . . . . . . . . 208
. . . . . . . . . . . . . . . 212
. . . . . . . . . . . . . . . 184
. . . . . . . . . . . . . . . 183
. . . . . . . . . . . . . . . 183
. . . . . . . . . . . . . . . 182
. . . . . . . . . . . . . . . 184
. . . . . . . . . . . . . . . . 61
. . . . . . . . . . . . . . . 153
. . . . . . . . . . . . . . . 153
. . . . . . . . . . . . . . . 152
. . . . . . . . . . . . . . . 181
. . . . . . . . . . . . . . . 182
. . . . . . . . . . . . . . . 120
. . . . . . . . . . .218 - 220
. . . . . . . . . . . . . . . 211
. . . . . . . . . . . . . . . 204
. . . . . . . . . . . . . . . 120
. . . . . . . . . . . . . . . 153
. . . . . . . . . . . . . . . 150
. . . . . . . . . . . . . . . 146
. . . . . . . . . . . . . . . 150
. . . . . . . . . . . . . . . 154
. . . . . . . . . . . . . . . 151
. . . . . . . . . . . . . . . 149
. . . . . . . . . . . . . . . 152
. . . . . . . . . . . . . . . 149
. . . . . . . . . . . . . . . 151
. . . . . . . . . . . . . . . 210
. . . . . . . . . . . . . . . 206
. . . . . . . . . . .204 - 205
. . . . . . . . . . . . . . . 212
. . . . . . . . . . . . . . . 164
. . . . . 53 - 55, 127, 140
. . . . . . . . . . . . . . . . 59
. . . . . . . . .56 - 58, 141
. . . . . . . . . . . . . . . . 42
. . . . . . . . . . . . . . . 181
. . . . . . . . . . . . . . . . 24
. . . . . . . . . . . . 65 - 67
. . . . . . . . . . . . . . . . 70
48 - 50, 125 - 126, 139
. . . . . . . . . . . . 51 - 52
. . . . . . . . . . . . . . . 162
. . . . . . . . . . . . . . . 188
. . . . . . . . . . . . . . . 149
INDICES
Mechanical Tees & Crosses – Grooved . . . . . . . . . . . . . . . . . . . .
Mechanical Tees & Crosses – Threaded . . . . . . . . . . . . . . . . . . .
Metric/Imperial Conversion Chart . . . . . . . . . . . . . . . . . . . . . . .
MINI-MITES Field Portable . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Misalignment and Deflection . . . . . . . . . . . . . . . . . . . . . . . . . . .
Model 2021 Automated Roll Groovers . . . . . . . . . . . . . . . . . . . .
Nipple Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nipples (Plain End x Male Thread) . . . . . . . . . . . . . . . . . . . . . . .
Nipples (Spline x Groove) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nipples (Spline x Male Thread) . . . . . . . . . . . . . . . . . . . . . . . . .
Nipples (Spline x Plain End) . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nipples (Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nipples, Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nipples, Plain End Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nipples, Plain End Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nipples, Plain End Swaged . . . . . . . . . . . . . . . . . . . . . . . . . . .
Outlet Couplings (Male Spline x Female Spline x Female Thread) . .
Outlet Couplings (Spline x Spline x Female Thread) . . . . . . . . . . .
Performance Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pipe Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pipe Support Stands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pipe Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pivot-Bolt Rigid Installation-Ready Coupling . . . . . . . . . . . . . . . . .
Plain End Adapter Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Plain End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Plain End Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Plain End Crosses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Plain End Flange Adapters (ANSI Class 150# & ANSI Class 300#)
Plain End Laterals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Plain End Reducing Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Plain End Swaged Nipples . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Plain End Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Plain End True Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Portable Cut Groover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Portable Roll Groovers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Portable Roll Groovers With Electric Motor . . . . . . . . . . . . . . . . .
Porta-Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reducers (Female Press x Male Press) . . . . . . . . . . . . . . . . . . . . .
Reducers, Concentric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reducers, Concentric (Small End Male Thread) . . . . . . . . . . . . . .
Reducers, Eccentric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reducing Base Support Elbow (Groove x Flange) . . . . . . . . . . . . .
Reducing Couplings (Male Spline x Female Spline) . . . . . . . . . . . .
Reducing Couplings, Flexible . . . . . . . . . . . . . . . . . . . . . . . . . .
Reducing Laterals, 45° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reducing Tee Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reducing Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reducing Tees (Groove x Groove x Male Thread) . . . . . . . . . . . . .
Reducing Tees (Press x Press x Press) . . . . . . . . . . . . . . . . . . . . .
Reducing Tees (Spline x Spline x Spline) . . . . . . . . . . . . . . . . . . .
Reducing Tees, Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
241
INDICES
Keyword Indices
INDICES
Keywords ....................................................................................................................................... Page
Replacement Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rigid Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rigid Couplings, Stainless Steel . . . . . . . . . . . . . . . . . . . .
Rigid Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Roll Groove Standard Specification for Copper Tubing . . . . .
Roll Groove Standard Specification for Steel & Other IPS Pipe
Roll Groover, Copper . . . . . . . . . . . . . . . . . . . . . . . . . . .
Roll Groovers For Ridgid® 300 Pipe Threader, Portable . . . .
Roll Groovers With Electric Motor, Portable . . . . . . . . . . . .
Roll Groovers, Automated . . . . . . . . . . . . . . . . . . . . . . . .
Roll Groovers, Model 2021 Automated . . . . . . . . . . . . . . .
Roll Groovers, Portable . . . . . . . . . . . . . . . . . . . . . . . . . .
SDR Pipe (Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . .
SDR Pipe with Coupling (Male Spline x Female Spline) . . . . .
Slip Couplings (Press x Press) . . . . . . . . . . . . . . . . . . . . . .
Splines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stainless Steel Flexible Couplings . . . . . . . . . . . . . . . . . . .
Stainless Steel Rigid Couplings . . . . . . . . . . . . . . . . . . . . .
Straight Connectors (Female Press x Female NPT) . . . . . . . . .
Straight Connectors (Female Press x Male NPT) . . . . . . . . . .
Straight Couplings (Press x Press) . . . . . . . . . . . . . . . . . . . .
Strainers, Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Suction Diffusers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Swaged Nipples, Plain End . . . . . . . . . . . . . . . . . . . . . . .
Tee and Reducing Tee Adapters (Press x Press x Female NPT) .
Tee Strainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tee Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tees (Groove x Groove x Male Thread). . . . . . . . . . . . . . . .
Tees (Spline x Spline x Spline) . . . . . . . . . . . . . . . . . . . . . .
Tees, Equal (Press x Press x Press) . . . . . . . . . . . . . . . . . . .
Tees, Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tees, Plain End Reducing . . . . . . . . . . . . . . . . . . . . . . . . .
Thermal Movement . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Triple Duty Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
True Wyes, 90° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
True Wyes, Plain End . . . . . . . . . . . . . . . . . . . . . . . . . . .
Unions, 3-Piece (Press x Press) . . . . . . . . . . . . . . . . . . . . . .
Valves, Ball . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Valves, Ball (Press x Press) . . . . . . . . . . . . . . . . . . . . . . . .
Valves, Butterfly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Valves, Butterfly with Lever Handle . . . . . . . . . . . . . . . . . . .
Valves, Circuit Balancing . . . . . . . . . . . . . . . . . . . . . . . . .
Van Stone Flange Adapters (Female Press x Flange) . . . . . . .
Vertical Piping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wyes, 90° True . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wyes, Plain End True . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wyes, Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
242
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . . . 190
.18 - 19, 121
. . . . . . . 134
. . . . . . . 218
. . . . . . . 203
. . . . . . . 201
. . . . . . . 130
. . . . . . . 206
. . .204 - 205
. . .208 - 209
. . . . . . . 208
. . . . . . . 206
. . . . . . . 178
. . . . . . . 179
. . . . . . . 159
. . . . . . . 190
. . . . . . . 135
. . . . . . . 134
. . . . . . . 165
. . . . . . . 164
. . . . . . . 159
. . . . . . . 110
. . .108 - 109
. . . . . . . 152
. . . . . . . 163
. . . . . . . 110
. . . . 68 - 69
46, 124, 137
. . . . . . . . 47
. . . . . . . 188
. . . . . . . 162
. . . . . . . 149
. . . . . . . 149
. . .215 - 216
. . . . . . . . 96
. . . . . . . . 63
. . . . . . . 151
. . . . . . . 165
. . . . 92 - 93
. . . . . . . 167
. . . . 90 - 91
. . . . . . . 128
. . . 99 - 104
. . . . . . . 166
. . . . . . . 221
. . . . . . . . 63
. . . . . . . 151
. . . . 68 - 69
www.grinnell.com
10-YEAR LIMITED WARRANTY
Limited Warranty
Products manufactured by Tyco International (Tyco) under
the GRINNELL brand are warranted solely to the original
Buyer for ten (10) years against defects in material and
workmanship when paid for and properly installed and
maintained under normal use and service, except for the
G-MINE line of products, which are warranted solely to the
original Buyer for six (6) months against defects in material
and workmanship when paid for and properly installed and
maintained under normal use and service. This warranty
will expire ten (10) years from date of shipment by Tyco. No
warranty is given for products or components manufactured by
companies not affiliated by ownership with Tyco or for products
and components which have been subject to misuse, improper installation or maintenance,
corrosion, or other external sources of damage. Materials found by Tyco to be defective
shall be either repaired or replaced, at Tyco’s sole option. Tyco neither assumes, nor
authorizes any person to assume for it, any other obligation in connection with the sale
of products or parts of products. Tyco shall not be responsible for system design errors or
inaccurate or incomplete information supplied by Buyer or Buyer’s representatives.
In no event shall Tyco be liable, in contract, tort, strict liability or under any other legal
theory, for incidental, indirect, special or consequential damages, including but not limited
to labor charges, regardless of whether Tyco was informed about the possibility of such
damages, and in no event shall Tyco’s liability exceed an amount equal to the sales price.
The foregoing warranty is made in lieu of any and all other warranties, express or implied,
including warranties of merchantability and fitness for a particular purpose.
This Limited Warranty sets forth the exclusive remedy for claims based on failure of or defect
in products, materials or components, whether the claim is made in contract, tort, strict
liability or any other legal theory.
This warranty will apply to the full extent permitted by law. The invalidity, in whole or part,
of any portion of this warranty will not affect the remainder.
Refer to back cover for country-specific customer care numbers.
243
Global Locations
Global Headquarters
United States of America
1400 Pennbrook Parkway
Lansdale, PA 19446
Tel: +800-558-5236
Fax: +800-877-1295
South America Headquarters
United States of America
1802 S.W. 2nd Street
Pompano Beach, FL 33069
Tel: +954-781-0866
Fax: +954-781-9330
Mexico Headquarters
Mexico
President Juarez Av 2007 Lot 6
San Jeronimo Tepetlacalco
Tlalnepantla, Estado de Mexico
Mexico 54090
Tel: +525 55 321 2350
Fax: +525 55 321 2358
Asia Pacific Headquarters
Singapore
2 Serangoon North Avenue 5, #07-01
Singapore 554911
Tel: +65 6577 4360
Fax: +65 6481 8791
Europe Headquarters
The Netherlands
Kopersteden 1
P.O. Box 198
7500 AD Enschede
Tel: +31 (0)53 428 4444
Fax: +31 (0)53 428 3377
Middle East Headquarters
United Arab Emirates
PO Box 61355
Warehouse TB01, R/A 8
Jebel Ali Free Zone, Dubai
Tel: +971 4 8838689
Fax: +971 48838674
© Copyright 2011 GRINNELL. GRINNELL is a mark and/or registered mark. GM-GENCATG-201110_EN
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2011:09:19 10:40:53-04:00 Creator : Adobe InDesign CS4 (6.0.6) Modify Date : 2011:10:12 10:40:12-04:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2011:10:12 10:40:12-04:00 Creator Tool : Adobe InDesign CS4 (6.0.6) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 10701 bytes, use -b option to extract) Instance ID : uuid:efa5c5ea-4442-0c44-938d-131c9d0ce824 Document ID : xmp.did:FA7F11740720681191099A541EFA6F17 Original Document ID : xmp.did:08801174072068118F62B27DA71C414B Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:08801174072068118F62B27DA71C414B, xmp.iid:09801174072068118F62B27DA71C414B, xmp.iid:0A801174072068118F62B27DA71C414B, xmp.iid:9E1DB55B132068118F62B27DA71C414B, xmp.iid:9F1DB55B132068118F62B27DA71C414B, xmp.iid:A01DB55B132068118F62B27DA71C414B, xmp.iid:A11DB55B132068118F62B27DA71C414B, xmp.iid:A21DB55B132068118F62B27DA71C414B, xmp.iid:A31DB55B132068118F62B27DA71C414B, xmp.iid:A41DB55B132068118F62B27DA71C414B, xmp.iid:A51DB55B132068118F62B27DA71C414B, xmp.iid:A61DB55B132068118F62B27DA71C414B, xmp.iid:A71DB55B132068118F62B27DA71C414B, xmp.iid:A81DB55B132068118F62B27DA71C414B, xmp.iid:DCCE438A2A2068118F62B27DA71C414B, xmp.iid:DDCE438A2A2068118F62B27DA71C414B, xmp.iid:DECE438A2A2068118F62B27DA71C414B, xmp.iid:DFCE438A2A2068118F62B27DA71C414B, xmp.iid:E0CE438A2A2068118F62B27DA71C414B, xmp.iid:E1CE438A2A2068118F62B27DA71C414B, xmp.iid:E2CE438A2A2068118F62B27DA71C414B, xmp.iid:E3CE438A2A2068118F62B27DA71C414B, xmp.iid:E4CE438A2A2068118F62B27DA71C414B, xmp.iid:E5CE438A2A2068118F62B27DA71C414B, xmp.iid:E6CE438A2A2068118F62B27DA71C414B, xmp.iid:90984F87302068118F62B27DA71C414B, xmp.iid:91984F87302068118F62B27DA71C414B, xmp.iid:92984F87302068118F62B27DA71C414B, xmp.iid:93984F87302068118F62B27DA71C414B, xmp.iid:0180117407206811910994B6182E6F7F, xmp.iid:0280117407206811910994B6182E6F7F, xmp.iid:0180117407206811B34B88515B6BF00D, xmp.iid:0480117407206811B34B88515B6BF00D, xmp.iid:0580117407206811B34B88515B6BF00D, xmp.iid:0680117407206811B34B88515B6BF00D, xmp.iid:0780117407206811B34B88515B6BF00D, xmp.iid:0880117407206811B34B88515B6BF00D, xmp.iid:0980117407206811B34B88515B6BF00D, xmp.iid:0A80117407206811B34B88515B6BF00D, xmp.iid:000839190D206811B34B88515B6BF00D, xmp.iid:010839190D206811B34B88515B6BF00D, xmp.iid:020839190D206811B34B88515B6BF00D, xmp.iid:030839190D206811B34B88515B6BF00D, xmp.iid:040839190D206811B34B88515B6BF00D, xmp.iid:050839190D206811B34B88515B6BF00D, xmp.iid:F77F1174072068118F62D8B4C88EA75C, xmp.iid:F87F1174072068118F62D8B4C88EA75C, xmp.iid:F97F1174072068118F62D8B4C88EA75C, xmp.iid:FA7F1174072068118F62D8B4C88EA75C, xmp.iid:FB7F1174072068118F62D8B4C88EA75C, xmp.iid:FC7F1174072068118F62D8B4C88EA75C, xmp.iid:FD7F1174072068118F62D8B4C88EA75C, xmp.iid:FE7F1174072068118F62D8B4C88EA75C, xmp.iid:FF7F1174072068118F62D8B4C88EA75C, xmp.iid:00801174072068118F62D8B4C88EA75C, xmp.iid:B032B618102068118F62D8B4C88EA75C, xmp.iid:B132B618102068118F62D8B4C88EA75C, xmp.iid:B232B618102068118F62D8B4C88EA75C, xmp.iid:B332B618102068118F62D8B4C88EA75C, xmp.iid:B432B618102068118F62D8B4C88EA75C, xmp.iid:B532B618102068118F62D8B4C88EA75C, xmp.iid:B632B618102068118F62D8B4C88EA75C, xmp.iid:01801174072068118F629E3F72E08A39, xmp.iid:02801174072068118F629E3F72E08A39, xmp.iid:03801174072068118F629E3F72E08A39, xmp.iid:04801174072068118F629E3F72E08A39, xmp.iid:05801174072068118F629E3F72E08A39, xmp.iid:06801174072068118F629E3F72E08A39, xmp.iid:07801174072068118F629E3F72E08A39, xmp.iid:08801174072068118F629E3F72E08A39, xmp.iid:09889F520F2068118F629E3F72E08A39, xmp.iid:0A889F520F2068118F629E3F72E08A39, xmp.iid:0B889F520F2068118F629E3F72E08A39, xmp.iid:0F889F520F2068118F629E3F72E08A39, xmp.iid:10889F520F2068118F629E3F72E08A39, xmp.iid:6A2E0FC7162068118F629E3F72E08A39, xmp.iid:6B2E0FC7162068118F629E3F72E08A39, xmp.iid:6C2E0FC7162068118F629E3F72E08A39, xmp.iid:6D2E0FC7162068118F629E3F72E08A39, xmp.iid:6E2E0FC7162068118F629E3F72E08A39, xmp.iid:6F2E0FC7162068118F629E3F72E08A39, xmp.iid:702E0FC7162068118F629E3F72E08A39, xmp.iid:712E0FC7162068118F629E3F72E08A39, xmp.iid:722E0FC7162068118F629E3F72E08A39, xmp.iid:732E0FC7162068118F629E3F72E08A39, xmp.iid:742E0FC7162068118F629E3F72E08A39, xmp.iid:CABACFA7242068118F629E3F72E08A39, xmp.iid:CBBACFA7242068118F629E3F72E08A39, xmp.iid:CCBACFA7242068118F629E3F72E08A39, xmp.iid:CDBACFA7242068118F629E3F72E08A39, xmp.iid:CEBACFA7242068118F629E3F72E08A39, xmp.iid:CFBACFA7242068118F629E3F72E08A39, xmp.iid:D0BACFA7242068118F629E3F72E08A39, xmp.iid:D1BACFA7242068118F629E3F72E08A39, xmp.iid:D2BACFA7242068118F629E3F72E08A39, xmp.iid:D3BACFA7242068118F629E3F72E08A39, xmp.iid:D4BACFA7242068118F629E3F72E08A39, xmp.iid:C2EF1843272068118F629E3F72E08A39, xmp.iid:C3EF1843272068118F629E3F72E08A39, xmp.iid:C4EF1843272068118F629E3F72E08A39, xmp.iid:C5EF1843272068118F629E3F72E08A39, xmp.iid:C6EF1843272068118F629E3F72E08A39, xmp.iid:C7EF1843272068118F629E3F72E08A39, xmp.iid:C8EF1843272068118F629E3F72E08A39, xmp.iid:C9EF1843272068118F629E3F72E08A39, xmp.iid:CAEF1843272068118F629E3F72E08A39, xmp.iid:CBEF1843272068118F629E3F72E08A39, xmp.iid:CCEF1843272068118F629E3F72E08A39, xmp.iid:E673151F2E2068118F629E3F72E08A39, xmp.iid:E773151F2E2068118F629E3F72E08A39, xmp.iid:E873151F2E2068118F629E3F72E08A39, xmp.iid:E973151F2E2068118F629E3F72E08A39, xmp.iid:EA73151F2E2068118F629E3F72E08A39, xmp.iid:00801174072068119109ECE0F2AEF803, xmp.iid:060ECDA0262068119109ECE0F2AEF803, xmp.iid:070ECDA0262068119109ECE0F2AEF803, xmp.iid:080ECDA0262068119109ECE0F2AEF803, xmp.iid:090ECDA0262068119109ECE0F2AEF803, xmp.iid:0A0ECDA0262068119109ECE0F2AEF803, xmp.iid:0B0ECDA0262068119109ECE0F2AEF803, xmp.iid:0C0ECDA0262068119109ECE0F2AEF803, xmp.iid:0D0ECDA0262068119109ECE0F2AEF803, xmp.iid:F77F117407206811AE56A034554304FE, xmp.iid:F87F117407206811AE56A034554304FE, xmp.iid:F97F117407206811AE56A034554304FE, xmp.iid:FA7F117407206811AE56A034554304FE, xmp.iid:FB7F117407206811AE56A034554304FE, xmp.iid:FC7F117407206811AE56A034554304FE, xmp.iid:FD7F117407206811AE56A034554304FE, xmp.iid:FE7F117407206811AE56A034554304FE, xmp.iid:FF7F117407206811AE56A034554304FE, xmp.iid:0080117407206811AE56A034554304FE, xmp.iid:8C3DB3A512206811AE56A034554304FE, xmp.iid:8D3DB3A512206811AE56A034554304FE, xmp.iid:8E3DB3A512206811AE56A034554304FE, xmp.iid:8F3DB3A512206811AE56A034554304FE, xmp.iid:903DB3A512206811AE56A034554304FE, xmp.iid:913DB3A512206811AE56A034554304FE, xmp.iid:923DB3A512206811AE56A034554304FE, xmp.iid:933DB3A512206811AE56A034554304FE, xmp.iid:943DB3A512206811AE56A034554304FE, xmp.iid:953DB3A512206811AE56A034554304FE, xmp.iid:963DB3A512206811AE56A034554304FE, xmp.iid:DC47563A1C206811AE56A034554304FE, xmp.iid:DD47563A1C206811AE56A034554304FE, xmp.iid:DE47563A1C206811AE56A034554304FE, xmp.iid:DF47563A1C206811AE56A034554304FE, xmp.iid:E047563A1C206811AE56A034554304FE, xmp.iid:E147563A1C206811AE56A034554304FE, xmp.iid:E247563A1C206811AE56A034554304FE, xmp.iid:E347563A1C206811AE56A034554304FE, xmp.iid:E447563A1C206811AE56A034554304FE, xmp.iid:E547563A1C206811AE56A034554304FE, xmp.iid:E647563A1C206811AE56A034554304FE, xmp.iid:9289E4DF36206811AE56A034554304FE, xmp.iid:9389E4DF36206811AE56A034554304FE, xmp.iid:9489E4DF36206811AE56A034554304FE, xmp.iid:9589E4DF36206811AE56A034554304FE, xmp.iid:9689E4DF36206811AE56A034554304FE, xmp.iid:9789E4DF36206811AE56A034554304FE, xmp.iid:0180117407206811AB0883164D2ABCA3, xmp.iid:0280117407206811AB0883164D2ABCA3, xmp.iid:0380117407206811AB0883164D2ABCA3, xmp.iid:0480117407206811AB0883164D2ABCA3, xmp.iid:0580117407206811AB0883164D2ABCA3, xmp.iid:0680117407206811AB0883164D2ABCA3, xmp.iid:0780117407206811AB0883164D2ABCA3, xmp.iid:0880117407206811AB0883164D2ABCA3, xmp.iid:0980117407206811AB0883164D2ABCA3, xmp.iid:0A80117407206811AB0883164D2ABCA3, xmp.iid:4C251FD10A206811AB0883164D2ABCA3, xmp.iid:4D251FD10A206811AB0883164D2ABCA3, xmp.iid:4E251FD10A206811AB0883164D2ABCA3, xmp.iid:4F251FD10A206811AB0883164D2ABCA3, xmp.iid:50251FD10A206811AB0883164D2ABCA3, xmp.iid:51251FD10A206811AB0883164D2ABCA3, xmp.iid:52251FD10A206811AB0883164D2ABCA3, xmp.iid:53251FD10A206811AB0883164D2ABCA3, xmp.iid:54251FD10A206811AB0883164D2ABCA3, xmp.iid:55251FD10A206811AB0883164D2ABCA3, xmp.iid:56251FD10A206811AB0883164D2ABCA3, xmp.iid:428E753F0F206811AB0883164D2ABCA3, xmp.iid:438E753F0F206811AB0883164D2ABCA3, xmp.iid:448E753F0F206811AB0883164D2ABCA3, xmp.iid:458E753F0F206811AB0883164D2ABCA3, xmp.iid:468E753F0F206811AB0883164D2ABCA3, xmp.iid:478E753F0F206811AB0883164D2ABCA3, xmp.iid:488E753F0F206811AB0883164D2ABCA3, xmp.iid:498E753F0F206811AB0883164D2ABCA3, xmp.iid:4A8E753F0F206811AB0883164D2ABCA3, xmp.iid:4B8E753F0F206811AB0883164D2ABCA3, xmp.iid:4C8E753F0F206811AB0883164D2ABCA3, xmp.iid:EE40D47516206811AB0883164D2ABCA3, xmp.iid:EF40D47516206811AB0883164D2ABCA3, xmp.iid:F040D47516206811AB0883164D2ABCA3, xmp.iid:F140D47516206811AB0883164D2ABCA3, xmp.iid:F240D47516206811AB0883164D2ABCA3, xmp.iid:F340D47516206811AB0883164D2ABCA3, xmp.iid:F440D47516206811AB0883164D2ABCA3, xmp.iid:F540D47516206811AB0883164D2ABCA3, xmp.iid:F640D47516206811AB0883164D2ABCA3, xmp.iid:F740D47516206811AB0883164D2ABCA3, xmp.iid:F840D47516206811AB0883164D2ABCA3, xmp.iid:26CD731C1B206811AB0883164D2ABCA3, xmp.iid:27CD731C1B206811AB0883164D2ABCA3, xmp.iid:28CD731C1B206811AB0883164D2ABCA3, xmp.iid:29CD731C1B206811AB0883164D2ABCA3, xmp.iid:2ACD731C1B206811AB0883164D2ABCA3, xmp.iid:2BCD731C1B206811AB0883164D2ABCA3, xmp.iid:2DCD731C1B206811AB0883164D2ABCA3, xmp.iid:2ECD731C1B206811AB0883164D2ABCA3, xmp.iid:2FCD731C1B206811AB0883164D2ABCA3, xmp.iid:30CD731C1B206811AB0883164D2ABCA3, xmp.iid:2EC0933320206811AB0883164D2ABCA3, xmp.iid:2FC0933320206811AB0883164D2ABCA3, xmp.iid:30C0933320206811AB0883164D2ABCA3, xmp.iid:31C0933320206811AB0883164D2ABCA3, xmp.iid:32C0933320206811AB0883164D2ABCA3, xmp.iid:33C0933320206811AB0883164D2ABCA3, xmp.iid:34C0933320206811AB0883164D2ABCA3, xmp.iid:35C0933320206811AB0883164D2ABCA3, xmp.iid:36C0933320206811AB0883164D2ABCA3, xmp.iid:37C0933320206811AB0883164D2ABCA3, xmp.iid:38C0933320206811AB0883164D2ABCA3, xmp.iid:EAC4E0ED2F206811AB0883164D2ABCA3, xmp.iid:EBC4E0ED2F206811AB0883164D2ABCA3, xmp.iid:ECC4E0ED2F206811AB0883164D2ABCA3, xmp.iid:EDC4E0ED2F206811AB0883164D2ABCA3, xmp.iid:EEC4E0ED2F206811AB0883164D2ABCA3, xmp.iid:EFC4E0ED2F206811AB0883164D2ABCA3, xmp.iid:F0C4E0ED2F206811AB0883164D2ABCA3, xmp.iid:F1C4E0ED2F206811AB0883164D2ABCA3, xmp.iid:F2C4E0ED2F206811AB0883164D2ABCA3, xmp.iid:F3C4E0ED2F206811AB0883164D2ABCA3, xmp.iid:F4C4E0ED2F206811AB0883164D2ABCA3, xmp.iid:D8D5878637206811AB0883164D2ABCA3, xmp.iid:D9D5878637206811AB0883164D2ABCA3, xmp.iid:DAD5878637206811AB0883164D2ABCA3, xmp.iid:DBD5878637206811AB0883164D2ABCA3, xmp.iid:DCD5878637206811AB0883164D2ABCA3, xmp.iid:DDD5878637206811AB0883164D2ABCA3, xmp.iid:DED5878637206811AB0883164D2ABCA3, xmp.iid:DFD5878637206811AB0883164D2ABCA3, xmp.iid:E0D5878637206811AB0883164D2ABCA3, xmp.iid:E1D5878637206811AB0883164D2ABCA3, xmp.iid:E2D5878637206811AB0883164D2ABCA3, xmp.iid:724B48373E206811AB0883164D2ABCA3, xmp.iid:734B48373E206811AB0883164D2ABCA3, xmp.iid:744B48373E206811AB0883164D2ABCA3, xmp.iid:754B48373E206811AB0883164D2ABCA3, xmp.iid:764B48373E206811AB0883164D2ABCA3, xmp.iid:774B48373E206811AB0883164D2ABCA3, xmp.iid:784B48373E206811AB0883164D2ABCA3, xmp.iid:794B48373E206811AB0883164D2ABCA3, xmp.iid:7A4B48373E206811AB0883164D2ABCA3, xmp.iid:7B4B48373E206811AB0883164D2ABCA3, xmp.iid:7C4B48373E206811AB0883164D2ABCA3, xmp.iid:DA4D399840206811AB0883164D2ABCA3, xmp.iid:DB4D399840206811AB0883164D2ABCA3, xmp.iid:DC4D399840206811AB0883164D2ABCA3, xmp.iid:DD4D399840206811AB0883164D2ABCA3, xmp.iid:1B79FC6D1C2068118F62FA36B4A82A93, xmp.iid:1C79FC6D1C2068118F62FA36B4A82A93, xmp.iid:8E3509FF312068118F62FA36B4A82A93, xmp.iid:8F3509FF312068118F62FA36B4A82A93, xmp.iid:903509FF312068118F62FA36B4A82A93, xmp.iid:913509FF312068118F62FA36B4A82A93, xmp.iid:923509FF312068118F62FA36B4A82A93, xmp.iid:933509FF312068118F62FA36B4A82A93, xmp.iid:943509FF312068118F62FA36B4A82A93, xmp.iid:953509FF312068118F62FA36B4A82A93, xmp.iid:963509FF312068118F62FA36B4A82A93, xmp.iid:973509FF312068118F62FA36B4A82A93, xmp.iid:983509FF312068118F62FA36B4A82A93, xmp.iid:28BED0A2352068118F62FA36B4A82A93, xmp.iid:29BED0A2352068118F62FA36B4A82A93, xmp.iid:2ABED0A2352068118F62FA36B4A82A93, xmp.iid:2BBED0A2352068118F62FA36B4A82A93, xmp.iid:2CBED0A2352068118F62FA36B4A82A93, xmp.iid:2DBED0A2352068118F62FA36B4A82A93, xmp.iid:2EBED0A2352068118F62FA36B4A82A93, xmp.iid:2FBED0A2352068118F62FA36B4A82A93, xmp.iid:30BED0A2352068118F62FA36B4A82A93, xmp.iid:31BED0A2352068118F62FA36B4A82A93, xmp.iid:32BED0A2352068118F62FA36B4A82A93, xmp.iid:2627F3F33C2068118F62FA36B4A82A93, xmp.iid:2727F3F33C2068118F62FA36B4A82A93, xmp.iid:2827F3F33C2068118F62FA36B4A82A93, xmp.iid:2927F3F33C2068118F62FA36B4A82A93, xmp.iid:2A27F3F33C2068118F62FA36B4A82A93, xmp.iid:2B27F3F33C2068118F62FA36B4A82A93, xmp.iid:2C27F3F33C2068118F62FA36B4A82A93, xmp.iid:2D27F3F33C2068118F62FA36B4A82A93, xmp.iid:2E27F3F33C2068118F62FA36B4A82A93, xmp.iid:2F27F3F33C2068118F62FA36B4A82A93, xmp.iid:3027F3F33C2068118F62FA36B4A82A93, xmp.iid:F88A7EC4412068118F62FA36B4A82A93, xmp.iid:FD8A7EC4412068118F62FA36B4A82A93, xmp.iid:FE8A7EC4412068118F62FA36B4A82A93, xmp.iid:FF8A7EC4412068118F62FA36B4A82A93, xmp.iid:008B7EC4412068118F62FA36B4A82A93, xmp.iid:018B7EC4412068118F62FA36B4A82A93, xmp.iid:028B7EC4412068118F62FA36B4A82A93, xmp.iid:D087AA36472068118F62FA36B4A82A93, xmp.iid:D187AA36472068118F62FA36B4A82A93, xmp.iid:D287AA36472068118F62FA36B4A82A93, xmp.iid:D387AA36472068118F62FA36B4A82A93, xmp.iid:D487AA36472068118F62FA36B4A82A93, xmp.iid:D587AA36472068118F62FA36B4A82A93, xmp.iid:D687AA36472068118F62FA36B4A82A93, xmp.iid:D787AA36472068118F62FA36B4A82A93, xmp.iid:D887AA36472068118F62FA36B4A82A93, xmp.iid:D987AA36472068118F62FA36B4A82A93, xmp.iid:5B5217C64B2068118F62FA36B4A82A93, xmp.iid:74117FE320071168BB1DF7718EC51025, xmp.iid:74117FE320071168BEDCEBEED78FE4F7, xmp.iid:74117FE420071168BEDCEBEED78FE4F7, xmp.iid:74117FE520071168BEDCEBEED78FE4F7, xmp.iid:74117FE620071168BEDCEBEED78FE4F7, xmp.iid:74117FE720071168BEDCEBEED78FE4F7, xmp.iid:74117FE820071168BEDCEBEED78FE4F7, xmp.iid:74117FE920071168BEDCEBEED78FE4F7, xmp.iid:74117FEA20071168BEDCEBEED78FE4F7, xmp.iid:74117FEB20071168BEDCEBEED78FE4F7, xmp.iid:74117FEC20071168BEDCEBEED78FE4F7, xmp.iid:90E6C97E20111168BEDCEBEED78FE4F7, xmp.iid:90E6C97F20111168BEDCEBEED78FE4F7, xmp.iid:90E6C98020111168BEDCEBEED78FE4F7, xmp.iid:90E6C98120111168BEDCEBEED78FE4F7, xmp.iid:90E6C98220111168BEDCEBEED78FE4F7, xmp.iid:90E6C98320111168BEDCEBEED78FE4F7, xmp.iid:90E6C98420111168BEDCEBEED78FE4F7, xmp.iid:90E6C98520111168BEDCEBEED78FE4F7, xmp.iid:90E6C98620111168BEDCEBEED78FE4F7, xmp.iid:90E6C98720111168BEDCEBEED78FE4F7, xmp.iid:90E6C98820111168BEDCEBEED78FE4F7, xmp.iid:A45D5CFC20161168BEDCEBEED78FE4F7, xmp.iid:A45D5CFD20161168BEDCEBEED78FE4F7, xmp.iid:74117FE320071168A7BAE0E740D9A79B, xmp.iid:74117FE420071168A7BAE0E740D9A79B, xmp.iid:74117FE520071168A7BAE0E740D9A79B, xmp.iid:74117FE620071168A7BAE0E740D9A79B, xmp.iid:74117FE720071168A7BAE0E740D9A79B, xmp.iid:74117FE820071168A7BAE0E740D9A79B, xmp.iid:74117FE920071168A7BAE0E740D9A79B, xmp.iid:74117FEA20071168A7BAE0E740D9A79B, xmp.iid:74117FEB20071168A7BAE0E740D9A79B, xmp.iid:74117FEC20071168A7BAE0E740D9A79B, xmp.iid:C316861020101168A7BAE0E740D9A79B, xmp.iid:C316861120101168A7BAE0E740D9A79B, xmp.iid:C316861220101168A7BAE0E740D9A79B, xmp.iid:C316861320101168A7BAE0E740D9A79B, xmp.iid:C316861420101168A7BAE0E740D9A79B, xmp.iid:C316861520101168A7BAE0E740D9A79B, xmp.iid:C316861620101168A7BAE0E740D9A79B, xmp.iid:C316861720101168A7BAE0E740D9A79B, xmp.iid:C316861820101168A7BAE0E740D9A79B, xmp.iid:C316861920101168A7BAE0E740D9A79B, xmp.iid:F77F1174072068119109AD6F99F554AF, xmp.iid:F87F1174072068119109AD6F99F554AF, xmp.iid:FC7F1174072068119109AD6F99F554AF, xmp.iid:FD7F1174072068119109AD6F99F554AF, xmp.iid:FE7F1174072068119109AD6F99F554AF, xmp.iid:FF7F1174072068119109AD6F99F554AF, xmp.iid:00801174072068119109AD6F99F554AF, xmp.iid:A86D24D5112068119109AD6F99F554AF, xmp.iid:A96D24D5112068119109AD6F99F554AF, xmp.iid:AA6D24D5112068119109AD6F99F554AF, xmp.iid:AB6D24D5112068119109AD6F99F554AF, xmp.iid:AC6D24D5112068119109AD6F99F554AF, xmp.iid:AD6D24D5112068119109AD6F99F554AF, xmp.iid:AE6D24D5112068119109AD6F99F554AF, xmp.iid:AF6D24D5112068119109AD6F99F554AF, xmp.iid:B06D24D5112068119109AD6F99F554AF, xmp.iid:B16D24D5112068119109AD6F99F554AF, xmp.iid:B26D24D5112068119109AD6F99F554AF, xmp.iid:22A50F13322068119109AD6F99F554AF, xmp.iid:23A50F13322068119109AD6F99F554AF, xmp.iid:24A50F13322068119109AD6F99F554AF, xmp.iid:55DBD1041D2068118F62B9A6ACCE549D, xmp.iid:56DBD1041D2068118F62B9A6ACCE549D, xmp.iid:57DBD1041D2068118F62B9A6ACCE549D, xmp.iid:58DBD1041D2068118F62B9A6ACCE549D, xmp.iid:59DBD1041D2068118F62B9A6ACCE549D, xmp.iid:5ADBD1041D2068118F62B9A6ACCE549D, xmp.iid:5BDBD1041D2068118F62B9A6ACCE549D, xmp.iid:5CDBD1041D2068118F62B9A6ACCE549D, xmp.iid:78F3166C462068118F62B9A6ACCE549D, xmp.iid:868FAD4539206811A9618F307C3D64A4, xmp.iid:888FAD4539206811A9618F307C3D64A4, xmp.iid:E0DA3388D6206811A9618F307C3D64A4, xmp.iid:E1DA3388D6206811A9618F307C3D64A4, xmp.iid:E2DA3388D6206811A9618F307C3D64A4, xmp.iid:E3DA3388D6206811A9618F307C3D64A4, xmp.iid:E4DA3388D6206811A9618F307C3D64A4, xmp.iid:E5DA3388D6206811A9618F307C3D64A4, xmp.iid:E6DA3388D6206811A9618F307C3D64A4, xmp.iid:E7DA3388D6206811A9618F307C3D64A4, xmp.iid:E8DA3388D6206811A9618F307C3D64A4, xmp.iid:E9DA3388D6206811A9618F307C3D64A4, xmp.iid:EADA3388D6206811A9618F307C3D64A4, xmp.iid:6680FC4DE0206811A9618F307C3D64A4, xmp.iid:6780FC4DE0206811A9618F307C3D64A4, xmp.iid:6880FC4DE0206811A9618F307C3D64A4, xmp.iid:6980FC4DE0206811A9618F307C3D64A4, xmp.iid:6A80FC4DE0206811A9618F307C3D64A4, xmp.iid:6B80FC4DE0206811A9618F307C3D64A4, xmp.iid:6C80FC4DE0206811A9618F307C3D64A4, xmp.iid:6D80FC4DE0206811A9618F307C3D64A4, xmp.iid:6E80FC4DE0206811A9618F307C3D64A4, xmp.iid:6F80FC4DE0206811A9618F307C3D64A4, xmp.iid:7080FC4DE0206811A9618F307C3D64A4, xmp.iid:F63A8CC1EC206811A9618F307C3D64A4, xmp.iid:F73A8CC1EC206811A9618F307C3D64A4, xmp.iid:F83A8CC1EC206811A9618F307C3D64A4, xmp.iid:F93A8CC1EC206811A9618F307C3D64A4, xmp.iid:FA3A8CC1EC206811A9618F307C3D64A4, xmp.iid:FB3A8CC1EC206811A9618F307C3D64A4, xmp.iid:FC3A8CC1EC206811A9618F307C3D64A4, xmp.iid:FD3A8CC1EC206811A9618F307C3D64A4, xmp.iid:FE3A8CC1EC206811A9618F307C3D64A4, xmp.iid:FF3A8CC1EC206811A9618F307C3D64A4, xmp.iid:003B8CC1EC206811A9618F307C3D64A4, xmp.iid:48D12146F9206811A9618F307C3D64A4, xmp.iid:49D12146F9206811A9618F307C3D64A4, xmp.iid:4AD12146F9206811A9618F307C3D64A4, xmp.iid:4BD12146F9206811A9618F307C3D64A4, xmp.iid:4CD12146F9206811A9618F307C3D64A4, xmp.iid:4DD12146F9206811A9618F307C3D64A4, xmp.iid:4ED12146F9206811A9618F307C3D64A4, xmp.iid:4FD12146F9206811A9618F307C3D64A4, xmp.iid:50D12146F9206811A9618F307C3D64A4, xmp.iid:51D12146F9206811A9618F307C3D64A4, xmp.iid:52D12146F9206811A9618F307C3D64A4, xmp.iid:06E96EE6FE206811A9618F307C3D64A4, xmp.iid:07E96EE6FE206811A9618F307C3D64A4, xmp.iid:08E96EE6FE206811A9618F307C3D64A4, xmp.iid:09E96EE6FE206811A9618F307C3D64A4, xmp.iid:0AE96EE6FE206811A9618F307C3D64A4, xmp.iid:0BE96EE6FE206811A9618F307C3D64A4, xmp.iid:0CE96EE6FE206811A9618F307C3D64A4, xmp.iid:0DE96EE6FE206811A9618F307C3D64A4, xmp.iid:0EE96EE6FE206811A9618F307C3D64A4, xmp.iid:0FE96EE6FE206811A9618F307C3D64A4, xmp.iid:10E96EE6FE206811A9618F307C3D64A4, xmp.iid:A693611F01216811A9618F307C3D64A4, xmp.iid:A793611F01216811A9618F307C3D64A4, xmp.iid:A893611F01216811A9618F307C3D64A4, xmp.iid:A993611F01216811A9618F307C3D64A4, xmp.iid:0180117407206811A613870A5305E2E5, xmp.iid:0280117407206811A613870A5305E2E5, xmp.iid:0380117407206811A613870A5305E2E5, xmp.iid:0480117407206811A613870A5305E2E5, xmp.iid:0580117407206811A613870A5305E2E5, xmp.iid:0680117407206811A613870A5305E2E5, xmp.iid:0780117407206811A613870A5305E2E5, xmp.iid:0880117407206811A613870A5305E2E5, xmp.iid:0980117407206811A613870A5305E2E5, xmp.iid:0A80117407206811A613870A5305E2E5, xmp.iid:8A8078550C206811A613870A5305E2E5, xmp.iid:8B8078550C206811A613870A5305E2E5, xmp.iid:8C8078550C206811A613870A5305E2E5, xmp.iid:8D8078550C206811A613870A5305E2E5, xmp.iid:8E8078550C206811A613870A5305E2E5, xmp.iid:8F8078550C206811A613870A5305E2E5, xmp.iid:908078550C206811A613870A5305E2E5, xmp.iid:918078550C206811A613870A5305E2E5, xmp.iid:928078550C206811A613870A5305E2E5, xmp.iid:938078550C206811A613870A5305E2E5, xmp.iid:948078550C206811A613870A5305E2E5, xmp.iid:12F061C10F206811A613870A5305E2E5, xmp.iid:13F061C10F206811A613870A5305E2E5, xmp.iid:14F061C10F206811A613870A5305E2E5, xmp.iid:15F061C10F206811A613870A5305E2E5, xmp.iid:16F061C10F206811A613870A5305E2E5, xmp.iid:17F061C10F206811A613870A5305E2E5, xmp.iid:18F061C10F206811A613870A5305E2E5, xmp.iid:19F061C10F206811A613870A5305E2E5, xmp.iid:1AF061C10F206811A613870A5305E2E5, xmp.iid:1BF061C10F206811A613870A5305E2E5, xmp.iid:1CF061C10F206811A613870A5305E2E5, xmp.iid:AE4030452B206811A613870A5305E2E5, xmp.iid:AF4030452B206811A613870A5305E2E5, xmp.iid:B04030452B206811A613870A5305E2E5, xmp.iid:B14030452B206811A613870A5305E2E5, xmp.iid:B24030452B206811A613870A5305E2E5, xmp.iid:B34030452B206811A613870A5305E2E5, xmp.iid:B44030452B206811A613870A5305E2E5, xmp.iid:B54030452B206811A613870A5305E2E5, xmp.iid:B64030452B206811A613870A5305E2E5, xmp.iid:B74030452B206811A613870A5305E2E5, xmp.iid:B84030452B206811A613870A5305E2E5, xmp.iid:FE168FD632206811A613870A5305E2E5, xmp.iid:FF168FD632206811A613870A5305E2E5, xmp.iid:00178FD632206811A613870A5305E2E5, xmp.iid:01178FD632206811A613870A5305E2E5, xmp.iid:02178FD632206811A613870A5305E2E5, xmp.iid:03178FD632206811A613870A5305E2E5, xmp.iid:04178FD632206811A613870A5305E2E5, xmp.iid:05178FD632206811A613870A5305E2E5, xmp.iid:06178FD632206811A613870A5305E2E5, xmp.iid:07178FD632206811A613870A5305E2E5, xmp.iid:08178FD632206811A613870A5305E2E5, xmp.iid:3AE95ADD38206811A613870A5305E2E5, xmp.iid:3BE95ADD38206811A613870A5305E2E5, xmp.iid:3CE95ADD38206811A613870A5305E2E5, xmp.iid:3DE95ADD38206811A613870A5305E2E5, xmp.iid:3EE95ADD38206811A613870A5305E2E5, xmp.iid:3FE95ADD38206811A613870A5305E2E5, xmp.iid:40E95ADD38206811A613870A5305E2E5, xmp.iid:41E95ADD38206811A613870A5305E2E5, xmp.iid:42E95ADD38206811A613870A5305E2E5, xmp.iid:43E95ADD38206811A613870A5305E2E5, xmp.iid:44E95ADD38206811A613870A5305E2E5, xmp.iid:C4E97AB448206811A613870A5305E2E5, xmp.iid:C5E97AB448206811A613870A5305E2E5, xmp.iid:C6E97AB448206811A613870A5305E2E5, xmp.iid:C7E97AB448206811A613870A5305E2E5, xmp.iid:C8E97AB448206811A613870A5305E2E5, xmp.iid:C9E97AB448206811A613870A5305E2E5, xmp.iid:CAE97AB448206811A613870A5305E2E5, xmp.iid:F77F117407206811B34B86DC223C5324, xmp.iid:F87F117407206811B34B86DC223C5324, xmp.iid:F77F1174072068119109D83FF305978C, xmp.iid:F87F1174072068119109D83FF305978C, xmp.iid:F97F1174072068119109D83FF305978C, xmp.iid:FA7F1174072068119109D83FF305978C, xmp.iid:FB7F1174072068119109D83FF305978C, xmp.iid:FC7F1174072068119109D83FF305978C, xmp.iid:FD7F1174072068119109D83FF305978C, xmp.iid:FE7F1174072068119109D83FF305978C, xmp.iid:FF7F1174072068119109D83FF305978C, xmp.iid:00801174072068119109D83FF305978C, xmp.iid:58B59ABA0E2068119109D83FF305978C, xmp.iid:59B59ABA0E2068119109D83FF305978C, xmp.iid:5AB59ABA0E2068119109D83FF305978C, xmp.iid:5BB59ABA0E2068119109D83FF305978C, xmp.iid:5CB59ABA0E2068119109D83FF305978C, xmp.iid:5DB59ABA0E2068119109D83FF305978C, xmp.iid:5EB59ABA0E2068119109D83FF305978C, xmp.iid:5FB59ABA0E2068119109D83FF305978C, xmp.iid:60B59ABA0E2068119109D83FF305978C, xmp.iid:61B59ABA0E2068119109D83FF305978C, xmp.iid:62B59ABA0E2068119109D83FF305978C, xmp.iid:A8803820132068119109D83FF305978C, xmp.iid:A9803820132068119109D83FF305978C, xmp.iid:AA803820132068119109D83FF305978C, xmp.iid:AB803820132068119109D83FF305978C, xmp.iid:AC803820132068119109D83FF305978C, xmp.iid:AD803820132068119109D83FF305978C, xmp.iid:AE803820132068119109D83FF305978C, xmp.iid:AF803820132068119109D83FF305978C, xmp.iid:B0803820132068119109D83FF305978C, xmp.iid:B1803820132068119109D83FF305978C, xmp.iid:B2803820132068119109D83FF305978C, xmp.iid:5AB41CE0242068119109D83FF305978C, xmp.iid:5BB41CE0242068119109D83FF305978C, xmp.iid:5CB41CE0242068119109D83FF305978C, xmp.iid:5DB41CE0242068119109D83FF305978C, xmp.iid:5EB41CE0242068119109D83FF305978C, xmp.iid:5FB41CE0242068119109D83FF305978C, xmp.iid:60B41CE0242068119109D83FF305978C, xmp.iid:61B41CE0242068119109D83FF305978C, xmp.iid:62B41CE0242068119109D83FF305978C, xmp.iid:63B41CE0242068119109D83FF305978C, xmp.iid:64B41CE0242068119109D83FF305978C, xmp.iid:8F8449AD222068119109F65852F767F4, xmp.iid:0180117407206811AFFD9BFCD7222D05, xmp.iid:0280117407206811AFFD9BFCD7222D05, xmp.iid:0380117407206811AFFD9BFCD7222D05, xmp.iid:0480117407206811AFFD9BFCD7222D05, xmp.iid:0580117407206811AFFD9BFCD7222D05, xmp.iid:0680117407206811AFFD9BFCD7222D05, xmp.iid:0780117407206811AFFD9BFCD7222D05, xmp.iid:0880117407206811AFFD9BFCD7222D05, xmp.iid:0980117407206811AFFD9BFCD7222D05, xmp.iid:0A80117407206811AFFD9BFCD7222D05, xmp.iid:227558A10D206811AFFD9BFCD7222D05, xmp.iid:237558A10D206811AFFD9BFCD7222D05, xmp.iid:247558A10D206811AFFD9BFCD7222D05, xmp.iid:257558A10D206811AFFD9BFCD7222D05, xmp.iid:267558A10D206811AFFD9BFCD7222D05, xmp.iid:277558A10D206811AFFD9BFCD7222D05, xmp.iid:287558A10D206811AFFD9BFCD7222D05, xmp.iid:297558A10D206811AFFD9BFCD7222D05, xmp.iid:2A7558A10D206811AFFD9BFCD7222D05, xmp.iid:2B7558A10D206811AFFD9BFCD7222D05, xmp.iid:96CDA03E10206811AFFD9BFCD7222D05, xmp.iid:97CDA03E10206811AFFD9BFCD7222D05, xmp.iid:98CDA03E10206811AFFD9BFCD7222D05, xmp.iid:99CDA03E10206811AFFD9BFCD7222D05, xmp.iid:9ACDA03E10206811AFFD9BFCD7222D05, xmp.iid:9BCDA03E10206811AFFD9BFCD7222D05, xmp.iid:9CCDA03E10206811AFFD9BFCD7222D05, xmp.iid:9DCDA03E10206811AFFD9BFCD7222D05, xmp.iid:9ECDA03E10206811AFFD9BFCD7222D05, xmp.iid:9FCDA03E10206811AFFD9BFCD7222D05, xmp.iid:A0CDA03E10206811AFFD9BFCD7222D05, xmp.iid:108548EB16206811AFFD9BFCD7222D05, xmp.iid:118548EB16206811AFFD9BFCD7222D05, xmp.iid:128548EB16206811AFFD9BFCD7222D05, xmp.iid:138548EB16206811AFFD9BFCD7222D05, xmp.iid:148548EB16206811AFFD9BFCD7222D05, xmp.iid:158548EB16206811AFFD9BFCD7222D05, xmp.iid:168548EB16206811AFFD9BFCD7222D05, xmp.iid:178548EB16206811AFFD9BFCD7222D05, xmp.iid:188548EB16206811AFFD9BFCD7222D05, xmp.iid:198548EB16206811AFFD9BFCD7222D05, xmp.iid:1A8548EB16206811AFFD9BFCD7222D05, xmp.iid:F673C3D420206811AFFD9BFCD7222D05, xmp.iid:F773C3D420206811AFFD9BFCD7222D05, xmp.iid:F873C3D420206811AFFD9BFCD7222D05, xmp.iid:F973C3D420206811AFFD9BFCD7222D05, xmp.iid:FA73C3D420206811AFFD9BFCD7222D05, xmp.iid:FB73C3D420206811AFFD9BFCD7222D05, xmp.iid:FC73C3D420206811AFFD9BFCD7222D05, xmp.iid:FD73C3D420206811AFFD9BFCD7222D05, xmp.iid:FE73C3D420206811AFFD9BFCD7222D05, xmp.iid:2880FDCE29206811AFFD9BFCD7222D05, xmp.iid:2980FDCE29206811AFFD9BFCD7222D05, xmp.iid:2A80FDCE29206811AFFD9BFCD7222D05, xmp.iid:2B80FDCE29206811AFFD9BFCD7222D05, xmp.iid:2C80FDCE29206811AFFD9BFCD7222D05, xmp.iid:2D80FDCE29206811AFFD9BFCD7222D05, xmp.iid:2E80FDCE29206811AFFD9BFCD7222D05, xmp.iid:2F80FDCE29206811AFFD9BFCD7222D05, xmp.iid:3080FDCE29206811AFFD9BFCD7222D05, xmp.iid:3180FDCE29206811AFFD9BFCD7222D05, xmp.iid:3280FDCE29206811AFFD9BFCD7222D05, xmp.iid:263ED9C135206811AFFD9BFCD7222D05, xmp.iid:273ED9C135206811AFFD9BFCD7222D05, xmp.iid:283ED9C135206811AFFD9BFCD7222D05, xmp.iid:293ED9C135206811AFFD9BFCD7222D05, xmp.iid:2A3ED9C135206811AFFD9BFCD7222D05, xmp.iid:2B3ED9C135206811AFFD9BFCD7222D05, xmp.iid:2C3ED9C135206811AFFD9BFCD7222D05, xmp.iid:2D3ED9C135206811AFFD9BFCD7222D05, xmp.iid:2E3ED9C135206811AFFD9BFCD7222D05, xmp.iid:2F3ED9C135206811AFFD9BFCD7222D05, xmp.iid:303ED9C135206811AFFD9BFCD7222D05, xmp.iid:5C54951039206811AFFD9BFCD7222D05, xmp.iid:5D54951039206811AFFD9BFCD7222D05, xmp.iid:5E54951039206811AFFD9BFCD7222D05, xmp.iid:5F54951039206811AFFD9BFCD7222D05, xmp.iid:6054951039206811AFFD9BFCD7222D05, xmp.iid:6154951039206811AFFD9BFCD7222D05, xmp.iid:6254951039206811AFFD9BFCD7222D05, xmp.iid:6354951039206811AFFD9BFCD7222D05, xmp.iid:6454951039206811AFFD9BFCD7222D05, xmp.iid:6554951039206811AFFD9BFCD7222D05, xmp.iid:6654951039206811AFFD9BFCD7222D05, xmp.iid:0CE0D50C43206811AFFD9BFCD7222D05, xmp.iid:0DE0D50C43206811AFFD9BFCD7222D05, xmp.iid:0EE0D50C43206811AFFD9BFCD7222D05, xmp.iid:0FE0D50C43206811AFFD9BFCD7222D05, xmp.iid:10E0D50C43206811AFFD9BFCD7222D05, xmp.iid:11E0D50C43206811AFFD9BFCD7222D05, xmp.iid:12E0D50C43206811AFFD9BFCD7222D05, xmp.iid:13E0D50C43206811AFFD9BFCD7222D05, xmp.iid:14E0D50C43206811AFFD9BFCD7222D05, xmp.iid:15E0D50C43206811AFFD9BFCD7222D05, xmp.iid:16E0D50C43206811AFFD9BFCD7222D05, xmp.iid:C69EDC254B206811AFFD9BFCD7222D05, xmp.iid:C79EDC254B206811AFFD9BFCD7222D05, xmp.iid:C89EDC254B206811AFFD9BFCD7222D05, xmp.iid:C99EDC254B206811AFFD9BFCD7222D05, xmp.iid:CA9EDC254B206811AFFD9BFCD7222D05, xmp.iid:CB9EDC254B206811AFFD9BFCD7222D05, xmp.iid:CC9EDC254B206811AFFD9BFCD7222D05, xmp.iid:CD9EDC254B206811AFFD9BFCD7222D05, xmp.iid:CE9EDC254B206811AFFD9BFCD7222D05, xmp.iid:CF9EDC254B206811AFFD9BFCD7222D05, xmp.iid:D09EDC254B206811AFFD9BFCD7222D05, xmp.iid:D8DA8E1E4D206811AFFD9BFCD7222D05, xmp.iid:D9DA8E1E4D206811AFFD9BFCD7222D05, xmp.iid:DADA8E1E4D206811AFFD9BFCD7222D05, xmp.iid:DBDA8E1E4D206811AFFD9BFCD7222D05, xmp.iid:DCDA8E1E4D206811AFFD9BFCD7222D05, xmp.iid:DDDA8E1E4D206811AFFD9BFCD7222D05, xmp.iid:DEDA8E1E4D206811AFFD9BFCD7222D05, xmp.iid:DFDA8E1E4D206811AFFD9BFCD7222D05, xmp.iid:E0DA8E1E4D206811AFFD9BFCD7222D05, xmp.iid:E1DA8E1E4D206811AFFD9BFCD7222D05, xmp.iid:E2DA8E1E4D206811AFFD9BFCD7222D05, xmp.iid:84FB7CAB50206811AFFD9BFCD7222D05, xmp.iid:85FB7CAB50206811AFFD9BFCD7222D05, xmp.iid:86FB7CAB50206811AFFD9BFCD7222D05, xmp.iid:87FB7CAB50206811AFFD9BFCD7222D05, xmp.iid:88FB7CAB50206811AFFD9BFCD7222D05, xmp.iid:89FB7CAB50206811AFFD9BFCD7222D05, xmp.iid:8AFB7CAB50206811AFFD9BFCD7222D05, xmp.iid:8BFB7CAB50206811AFFD9BFCD7222D05, xmp.iid:8CFB7CAB50206811AFFD9BFCD7222D05, xmp.iid:8DFB7CAB50206811AFFD9BFCD7222D05, xmp.iid:8EFB7CAB50206811AFFD9BFCD7222D05, xmp.iid:8ED9081B54206811AFFD9BFCD7222D05, xmp.iid:8FD9081B54206811AFFD9BFCD7222D05, xmp.iid:90D9081B54206811AFFD9BFCD7222D05, xmp.iid:91D9081B54206811AFFD9BFCD7222D05, xmp.iid:92D9081B54206811AFFD9BFCD7222D05, xmp.iid:93D9081B54206811AFFD9BFCD7222D05, xmp.iid:0180117407206811B1A4FEBD33EA3E51, xmp.iid:0280117407206811B1A4FEBD33EA3E51, xmp.iid:0380117407206811B1A4FEBD33EA3E51, xmp.iid:74E3562138206811B1A4FEBD33EA3E51, xmp.iid:0180117407206811ACAFD1EAC0CA220B, xmp.iid:0280117407206811ACAFD1EAC0CA220B, xmp.iid:0180117407206811AE56926683B8B1B6, xmp.iid:0280117407206811AE56926683B8B1B6, xmp.iid:0380117407206811AE56926683B8B1B6, xmp.iid:0480117407206811AE56926683B8B1B6, xmp.iid:0580117407206811AE56926683B8B1B6, xmp.iid:0680117407206811AE56926683B8B1B6, xmp.iid:0780117407206811AE56926683B8B1B6, xmp.iid:0880117407206811AE56926683B8B1B6, xmp.iid:0980117407206811AE56926683B8B1B6, xmp.iid:0A80117407206811AE56926683B8B1B6, xmp.iid:1C8B5FF632206811AE56926683B8B1B6, xmp.iid:0180117407206811ACAFAAFE551BB221, xmp.iid:0280117407206811ACAFAAFE551BB221, xmp.iid:0380117407206811ACAFAAFE551BB221, xmp.iid:0480117407206811ACAFAAFE551BB221, xmp.iid:0580117407206811ACAFAAFE551BB221, xmp.iid:0680117407206811ACAFAAFE551BB221, xmp.iid:0780117407206811ACAFAAFE551BB221, xmp.iid:0880117407206811ACAFAAFE551BB221, xmp.iid:0980117407206811ACAFAAFE551BB221, xmp.iid:0A80117407206811ACAFAAFE551BB221, xmp.iid:FEF68AD90D206811ACAFAAFE551BB221, xmp.iid:FFF68AD90D206811ACAFAAFE551BB221, xmp.iid:00F78AD90D206811ACAFAAFE551BB221, xmp.iid:01F78AD90D206811ACAFAAFE551BB221, xmp.iid:02F78AD90D206811ACAFAAFE551BB221, xmp.iid:03F78AD90D206811ACAFAAFE551BB221, xmp.iid:04F78AD90D206811ACAFAAFE551BB221, xmp.iid:05F78AD90D206811ACAFAAFE551BB221, xmp.iid:08F78AD90D206811ACAFAAFE551BB221, xmp.iid:34F036B123206811ACAFAAFE551BB221, xmp.iid:35F036B123206811ACAFAAFE551BB221, xmp.iid:0180117407206811B840DD4DA6443D70, xmp.iid:0280117407206811B840DD4DA6443D70, xmp.iid:0380117407206811B840DD4DA6443D70, xmp.iid:0180117407206811B840E92DB3F15E50, xmp.iid:0880117407206811B840E92DB3F15E50, xmp.iid:0980117407206811B840E92DB3F15E50, xmp.iid:0A80117407206811B840E92DB3F15E50, xmp.iid:544E81F034206811B840E92DB3F15E50, xmp.iid:564E81F034206811B840E92DB3F15E50, xmp.iid:0480117407206811B84089837F39C6A8, xmp.iid:0580117407206811B84089837F39C6A8, xmp.iid:0680117407206811B84089837F39C6A8, xmp.iid:0780117407206811B84089837F39C6A8, xmp.iid:0880117407206811B84089837F39C6A8, xmp.iid:0980117407206811B84089837F39C6A8, xmp.iid:0A80117407206811B84089837F39C6A8, xmp.iid:C2945B4D26206811B84089837F39C6A8, xmp.iid:C3945B4D26206811B84089837F39C6A8, xmp.iid:C4945B4D26206811B84089837F39C6A8, xmp.iid:C5945B4D26206811B84089837F39C6A8, xmp.iid:C6945B4D26206811B84089837F39C6A8, xmp.iid:C7945B4D26206811B84089837F39C6A8, xmp.iid:C8945B4D26206811B84089837F39C6A8, xmp.iid:CA945B4D26206811B84089837F39C6A8, xmp.iid:CB945B4D26206811B84089837F39C6A8, xmp.iid:CC945B4D26206811B84089837F39C6A8, xmp.iid:FA8EFA4543206811B84089837F39C6A8, xmp.iid:FB8EFA4543206811B84089837F39C6A8, xmp.iid:FC8EFA4543206811B84089837F39C6A8, xmp.iid:FD8EFA4543206811B84089837F39C6A8, xmp.iid:FE8EFA4543206811B84089837F39C6A8, xmp.iid:FF8EFA4543206811B84089837F39C6A8, xmp.iid:F77F1174072068118F62B65E634D17DB, xmp.iid:F87F1174072068118F62B65E634D17DB, xmp.iid:C57C014F132068118F62AA2A9748C067, xmp.iid:F97F117407206811AFFDECB0BCE73D35, xmp.iid:FA7F117407206811AFFDECB0BCE73D35, xmp.iid:FB7F117407206811AFFDECB0BCE73D35, xmp.iid:FC7F117407206811AFFDECB0BCE73D35, xmp.iid:FD7F117407206811AFFDECB0BCE73D35, xmp.iid:FE7F117407206811AFFDECB0BCE73D35, xmp.iid:FF7F117407206811AFFDECB0BCE73D35, xmp.iid:0080117407206811AFFDECB0BCE73D35, xmp.iid:8A902CFE21206811AFFDECB0BCE73D35, xmp.iid:8B902CFE21206811AFFDECB0BCE73D35, xmp.iid:8F902CFE21206811AFFDECB0BCE73D35, xmp.iid:90902CFE21206811AFFDECB0BCE73D35, xmp.iid:91902CFE21206811AFFDECB0BCE73D35, xmp.iid:92902CFE21206811AFFDECB0BCE73D35, xmp.iid:93902CFE21206811AFFDECB0BCE73D35, xmp.iid:94902CFE21206811AFFDECB0BCE73D35, xmp.iid:E4A38C403A206811AFFDECB0BCE73D35, xmp.iid:F87F117407206811AE56EF481DA5C9FE, xmp.iid:F97F117407206811AE56EF481DA5C9FE, xmp.iid:FA7F117407206811AE56EF481DA5C9FE, xmp.iid:FB7F117407206811AE56EF481DA5C9FE, xmp.iid:FC7F117407206811AE56EF481DA5C9FE, xmp.iid:FD7F117407206811AE56EF481DA5C9FE, xmp.iid:03801174072068118F62845EBD2484C7, xmp.iid:04801174072068118F62845EBD2484C7, xmp.iid:05801174072068118F62845EBD2484C7, xmp.iid:06801174072068118F62845EBD2484C7, xmp.iid:07801174072068118F62845EBD2484C7, xmp.iid:08801174072068118F62845EBD2484C7, xmp.iid:09801174072068118F62845EBD2484C7, xmp.iid:0A801174072068118F62845EBD2484C7, xmp.iid:8CFC8670322068118F62845EBD2484C7, xmp.iid:8DFC8670322068118F62845EBD2484C7, xmp.iid:8EFC8670322068118F62845EBD2484C7, xmp.iid:8FFC8670322068118F62845EBD2484C7, xmp.iid:90FC8670322068118F62845EBD2484C7, xmp.iid:91FC8670322068118F62845EBD2484C7, xmp.iid:92FC8670322068118F62845EBD2484C7, xmp.iid:93FC8670322068118F62845EBD2484C7, xmp.iid:F77F117407206811AB08D7C3DD04F354, xmp.iid:F87F117407206811AB08D7C3DD04F354, xmp.iid:F97F117407206811AB08D7C3DD04F354, xmp.iid:FA7F117407206811AB08D7C3DD04F354, xmp.iid:0180117407206811B840C74FC7B14D50, xmp.iid:0280117407206811B840C74FC7B14D50, xmp.iid:0380117407206811B840C74FC7B14D50, xmp.iid:0480117407206811B840C74FC7B14D50, xmp.iid:0580117407206811B840C74FC7B14D50, xmp.iid:0680117407206811B840C74FC7B14D50, xmp.iid:0780117407206811B840C74FC7B14D50, xmp.iid:0880117407206811B840C74FC7B14D50, xmp.iid:0980117407206811B840C74FC7B14D50, xmp.iid:0180117407206811A961CC07F220B937, xmp.iid:0280117407206811A961CC07F220B937, xmp.iid:0380117407206811A961CC07F220B937, xmp.iid:0480117407206811A961CC07F220B937, xmp.iid:0580117407206811A961CC07F220B937, xmp.iid:0680117407206811A961CC07F220B937, xmp.iid:0780117407206811A961CC07F220B937, xmp.iid:0880117407206811A961CC07F220B937, xmp.iid:0A80117407206811A961CC07F220B937, xmp.iid:FB7F117407206811AE5687D79E31B990, xmp.iid:FC7F117407206811AE5687D79E31B990, xmp.iid:FD7F117407206811AE5687D79E31B990, xmp.iid:FE7F117407206811AE5687D79E31B990, xmp.iid:FF7F117407206811AE5687D79E31B990, xmp.iid:0080117407206811AE5687D79E31B990, xmp.iid:B40EDBDA20206811AE5687D79E31B990, xmp.iid:01801174072068118F629397786C0765, xmp.iid:02801174072068118F629397786C0765, xmp.iid:03801174072068118F629397786C0765, xmp.iid:04801174072068118F629397786C0765, xmp.iid:05801174072068118F629397786C0765, xmp.iid:06801174072068118F629397786C0765, xmp.iid:07801174072068118F629397786C0765, xmp.iid:08801174072068118F629397786C0765, xmp.iid:09801174072068118F629397786C0765, xmp.iid:0A801174072068118F629397786C0765, xmp.iid:7852E3F10D2068118F629397786C0765, xmp.iid:7952E3F10D2068118F629397786C0765, xmp.iid:7A52E3F10D2068118F629397786C0765, xmp.iid:7B52E3F10D2068118F629397786C0765, xmp.iid:7C52E3F10D2068118F629397786C0765, xmp.iid:7D52E3F10D2068118F629397786C0765, xmp.iid:7E52E3F10D2068118F629397786C0765, xmp.iid:7F52E3F10D2068118F629397786C0765, xmp.iid:8052E3F10D2068118F629397786C0765, xmp.iid:8152E3F10D2068118F629397786C0765, xmp.iid:8252E3F10D2068118F629397786C0765, xmp.iid:F85C06C0192068118F629397786C0765, xmp.iid:F95C06C0192068118F629397786C0765, xmp.iid:FA5C06C0192068118F629397786C0765, xmp.iid:FB5C06C0192068118F629397786C0765, xmp.iid:FC5C06C0192068118F629397786C0765, xmp.iid:FD5C06C0192068118F629397786C0765, xmp.iid:FE5C06C0192068118F629397786C0765, xmp.iid:FF5C06C0192068118F629397786C0765, xmp.iid:005D06C0192068118F629397786C0765, xmp.iid:015D06C0192068118F629397786C0765, xmp.iid:025D06C0192068118F629397786C0765, xmp.iid:6A1E8F5F1D2068118F629397786C0765, xmp.iid:6B1E8F5F1D2068118F629397786C0765, xmp.iid:6C1E8F5F1D2068118F629397786C0765, xmp.iid:6D1E8F5F1D2068118F629397786C0765, xmp.iid:6E1E8F5F1D2068118F629397786C0765, xmp.iid:6F1E8F5F1D2068118F629397786C0765, xmp.iid:701E8F5F1D2068118F629397786C0765, xmp.iid:711E8F5F1D2068118F629397786C0765, xmp.iid:721E8F5F1D2068118F629397786C0765, xmp.iid:731E8F5F1D2068118F629397786C0765, xmp.iid:741E8F5F1D2068118F629397786C0765, xmp.iid:EA63F593352068118F629397786C0765, xmp.iid:EB63F593352068118F629397786C0765, xmp.iid:EC63F593352068118F629397786C0765, xmp.iid:ED63F593352068118F629397786C0765, xmp.iid:EE63F593352068118F629397786C0765, xmp.iid:EF63F593352068118F629397786C0765, xmp.iid:F063F593352068118F629397786C0765, xmp.iid:F163F593352068118F629397786C0765, xmp.iid:F263F593352068118F629397786C0765, xmp.iid:F363F593352068118F629397786C0765, xmp.iid:F463F593352068118F629397786C0765, xmp.iid:F6E74311392068118F629397786C0765, xmp.iid:F7E74311392068118F629397786C0765, xmp.iid:F8E74311392068118F629397786C0765, xmp.iid:F9E74311392068118F629397786C0765, xmp.iid:FAE74311392068118F629397786C0765, xmp.iid:FBE74311392068118F629397786C0765, xmp.iid:FCE74311392068118F629397786C0765, xmp.iid:F87F117407206811B699A131A26F3087, xmp.iid:F97F117407206811B699A131A26F3087, xmp.iid:FA7F117407206811B699A131A26F3087, xmp.iid:FB7F117407206811B699A131A26F3087, xmp.iid:FC7F117407206811B699A131A26F3087, xmp.iid:FD7F117407206811B699A131A26F3087, xmp.iid:FE7F117407206811B699A131A26F3087, xmp.iid:0080117407206811B699A131A26F3087, xmp.iid:04340BC31A206811B699A131A26F3087, xmp.iid:05340BC31A206811B699A131A26F3087, xmp.iid:06340BC31A206811B699A131A26F3087, xmp.iid:07340BC31A206811B699A131A26F3087, xmp.iid:08340BC31A206811B699A131A26F3087, xmp.iid:0180117407206811B699BB2A437B8892, xmp.iid:0280117407206811B699BB2A437B8892, xmp.iid:0380117407206811B699BB2A437B8892, xmp.iid:0A80117407206811B699BB2A437B8892, xmp.iid:86F425AA26206811B699BB2A437B8892, xmp.iid:87F425AA26206811B699BB2A437B8892, xmp.iid:88F425AA26206811B699BB2A437B8892, xmp.iid:89F425AA26206811B699BB2A437B8892, xmp.iid:8AF425AA26206811B699BB2A437B8892, xmp.iid:8BF425AA26206811B699BB2A437B8892, xmp.iid:8CF425AA26206811B699BB2A437B8892, xmp.iid:8DF425AA26206811B699BB2A437B8892, xmp.iid:F77F1174072068119457DB75C9378C6F, xmp.iid:F87F1174072068119457DB75C9378C6F, xmp.iid:F97F1174072068119457DB75C9378C6F, xmp.iid:FA7F1174072068119457DB75C9378C6F, xmp.iid:FB7F1174072068119457DB75C9378C6F, xmp.iid:FC7F1174072068119457DB75C9378C6F, xmp.iid:FD7F1174072068119457DB75C9378C6F, xmp.iid:FE7F1174072068119457DB75C9378C6F, xmp.iid:FF7F1174072068119457DB75C9378C6F, xmp.iid:00801174072068119457DB75C9378C6F, xmp.iid:B4F234FD102068119457DB75C9378C6F, xmp.iid:B5F234FD102068119457DB75C9378C6F, xmp.iid:B6F234FD102068119457DB75C9378C6F, xmp.iid:B7F234FD102068119457DB75C9378C6F, xmp.iid:B8F234FD102068119457DB75C9378C6F, xmp.iid:B9F234FD102068119457DB75C9378C6F, xmp.iid:BAF234FD102068119457DB75C9378C6F, xmp.iid:BBF234FD102068119457DB75C9378C6F, xmp.iid:BCF234FD102068119457DB75C9378C6F, xmp.iid:0180117407206811AFFDC379E2A2284D, xmp.iid:0280117407206811AFFDC379E2A2284D, xmp.iid:0380117407206811AFFDC379E2A2284D, xmp.iid:0480117407206811AFFDC379E2A2284D, xmp.iid:0580117407206811AFFDC379E2A2284D, xmp.iid:0680117407206811AFFDC379E2A2284D, xmp.iid:ADAAAACF0D206811AFFDC379E2A2284D, xmp.iid:AEAAAACF0D206811AFFDC379E2A2284D, xmp.iid:AFAAAACF0D206811AFFDC379E2A2284D, xmp.iid:B0AAAACF0D206811AFFDC379E2A2284D, xmp.iid:B1AAAACF0D206811AFFDC379E2A2284D, xmp.iid:B2AAAACF0D206811AFFDC379E2A2284D, xmp.iid:CEBECF5D16206811AFFDC379E2A2284D, xmp.iid:D0BECF5D16206811AFFDC379E2A2284D, xmp.iid:D1BECF5D16206811AFFDC379E2A2284D, xmp.iid:D2BECF5D16206811AFFDC379E2A2284D, xmp.iid:D3BECF5D16206811AFFDC379E2A2284D, xmp.iid:D4BECF5D16206811AFFDC379E2A2284D, xmp.iid:D5BECF5D16206811AFFDC379E2A2284D, xmp.iid:D6BECF5D16206811AFFDC379E2A2284D, xmp.iid:0180117407206811BEDC8F8D167321A6, xmp.iid:0280117407206811BEDC8F8D167321A6, xmp.iid:0380117407206811BEDC8F8D167321A6, xmp.iid:0480117407206811BEDC8F8D167321A6, xmp.iid:F77F117407206811ACAF8395FDCE1443, xmp.iid:F87F117407206811ACAF8395FDCE1443, xmp.iid:FC7F117407206811ACAF8395FDCE1443, xmp.iid:FD7F117407206811ACAF8395FDCE1443, xmp.iid:FE7F117407206811ACAF8395FDCE1443, xmp.iid:FF7F117407206811ACAF8395FDCE1443, xmp.iid:0080117407206811ACAF8395FDCE1443, xmp.iid:3EA06F6B21206811ACAF8395FDCE1443, xmp.iid:3FA06F6B21206811ACAF8395FDCE1443, xmp.iid:40A06F6B21206811ACAF8395FDCE1443, xmp.iid:41A06F6B21206811ACAF8395FDCE1443, xmp.iid:42A06F6B21206811ACAF8395FDCE1443, xmp.iid:43A06F6B21206811ACAF8395FDCE1443, xmp.iid:44A06F6B21206811ACAF8395FDCE1443, xmp.iid:45A06F6B21206811ACAF8395FDCE1443, xmp.iid:46A06F6B21206811ACAF8395FDCE1443, xmp.iid:47A06F6B21206811ACAF8395FDCE1443, xmp.iid:48A06F6B21206811ACAF8395FDCE1443, xmp.iid:172BAA6441206811ACAF8395FDCE1443, xmp.iid:0980117407206811A6139D20B8ED61E6, xmp.iid:74117FD920071168B563BC8A6FDD24B6, xmp.iid:74117FDA20071168B563BC8A6FDD24B6, xmp.iid:74117FDB20071168B563BC8A6FDD24B6, xmp.iid:74117FDC20071168B563BC8A6FDD24B6, xmp.iid:74117FDD20071168B563BC8A6FDD24B6, xmp.iid:74117FDE20071168B563BC8A6FDD24B6, xmp.iid:74117FDF20071168B563BC8A6FDD24B6, xmp.iid:74117FE020071168B563BC8A6FDD24B6, xmp.iid:74117FE120071168B563BC8A6FDD24B6 History When : 2010:08:03 12:27:54Z, 2010:08:03 12:28:19Z, 2010:08:03 12:28:19Z, 2010:08:03 12:33:44Z, 2010:08:03 12:34:04Z, 2010:08:03 12:34:18Z, 2010:08:03 12:34:50Z, 2010:08:03 12:36:57Z, 2010:08:03 12:42:29Z, 2010:08:03 13:54:06Z, 2010:08:03 14:15:40Z, 2010:08:03 14:45:16Z, 2010:08:03 14:46:23Z, 2010:08:03 14:54:28Z, 2010:08:03 15:19:41Z, 2010:08:03 15:20:56Z, 2010:08:03 15:36:20Z, 2010:08:03 15:36:40Z, 2010:08:03 15:45:36Z, 2010:08:03 15:48:43Z, 2010:08:03 15:50:38Z, 2010:08:03 15:51:38Z, 2010:08:03 15:53Z, 2010:08:03 15:53:52Z, 2010:08:03 15:58:21Z, 2010:08:03 16:02:33Z, 2010:08:03 16:14:35Z, 2010:08:03 16:15:44Z, 2010:08:03 16:21:20Z, 2010:08:04 10:12:25Z, 2010:08:04 10:33:25Z, 2010:08:12 12:35:33Z, 2010:08:12 12:46:30Z, 2010:08:12 12:47:22Z, 2010:08:12 12:49:32Z, 2010:08:12 12:57:58Z, 2010:08:12 12:59:33Z, 2010:08:12 13:10:26Z, 2010:08:12 13:13:51Z, 2010:08:12 13:15:58Z, 2010:08:12 13:16:22Z, 2010:08:12 13:37:44Z, 2010:08:12 13:52:39Z, 2010:08:12 13:53:24Z, 2010:08:12 14:08:04Z, 2010:08:13 15:27:47Z, 2010:08:13 15:33:39Z, 2010:08:13 15:38:28Z, 2010:08:13 15:40:22Z, 2010:08:13 16:02:34Z, 2010:08:13 16:03:23Z, 2010:08:13 16:06Z, 2010:08:13 16:22:07Z, 2010:08:13 16:22:35Z, 2010:08:13 16:27:06Z, 2010:08:13 16:29:39Z, 2010:08:13 16:29:48Z, 2010:08:13 16:32:10Z, 2010:08:13 16:39:03Z, 2010:08:13 16:40:35Z, 2010:08:13 16:44:41Z, 2010:08:13 16:49:25Z, 2010:08:16 11:17:06Z, 2010:08:16 11:33:39Z, 2010:08:16 11:35:03Z, 2010:08:16 11:47:21Z, 2010:08:16 12:02:05Z, 2010:08:16 12:02:13Z, 2010:08:16 12:02:33Z, 2010:08:16 12:07:19Z, 2010:08:16 12:24:01Z, 2010:08:16 12:50:32Z, 2010:08:16 12:55:21Z, 2010:08:16 12:57:54Z, 2010:08:16 12:59:55Z, 2010:08:16 13:06:48Z, 2010:08:16 13:09:13Z, 2010:08:16 14:35:21Z, 2010:08:16 14:35:30Z, 2010:08:16 14:38:20Z, 2010:08:16 14:39:31Z, 2010:08:16 14:39:47Z, 2010:08:16 14:39:47Z, 2010:08:16 14:41:31Z, 2010:08:16 14:43:57Z, 2010:08:16 14:45:39Z, 2010:08:16 14:46:08Z, 2010:08:16 14:47:57Z, 2010:08:16 14:48:20Z, 2010:08:16 14:49:27Z, 2010:08:16 14:49:54Z, 2010:08:16 14:50:48Z, 2010:08:16 14:53:21Z, 2010:08:16 14:59:50Z, 2010:08:16 15:00:55Z, 2010:08:16 15:03:56Z, 2010:08:16 15:04:20Z, 2010:08:16 15:04:48Z, 2010:08:16 15:07:20Z, 2010:08:16 15:17:15Z, 2010:08:16 15:21:56Z, 2010:08:16 15:22:54Z, 2010:08:16 15:23:20Z, 2010:08:16 15:24:51Z, 2010:08:16 15:25:02Z, 2010:08:16 15:38:50Z, 2010:08:16 15:47:48Z, 2010:08:16 15:52:17Z, 2010:08:16 15:53:54Z, 2010:08:16 15:54:34Z, 2010:08:16 15:55:06Z, 2010:08:16 15:57Z, 2010:08:16 15:58:59Z, 2010:08:18 11:54:53Z, 2010:08:18 14:03:41Z, 2010:08:18 14:04:36Z, 2010:08:18 14:10:56Z, 2010:08:18 14:22:48Z, 2010:08:18 14:27:12Z, 2010:08:18 14:38:08Z, 2010:08:18 14:43:38Z, 2010:08:18 14:50:33Z, 2010:08:19 09:05:37Z, 2010:08:19 09:09:45Z, 2010:08:19 09:15:10Z, 2010:08:19 09:20:44Z, 2010:08:19 09:26:21Z, 2010:08:19 09:46:53Z, 2010:08:19 09:51:29Z, 2010:08:19 09:53:13Z, 2010:08:19 09:54:10Z, 2010:08:19 10:20:19Z, 2010:08:19 10:25:45Z, 2010:08:19 11:09:14Z, 2010:08:19 11:15:54Z, 2010:08:19 11:21:22Z, 2010:08:19 11:23:39Z, 2010:08:19 11:25:44Z, 2010:08:19 11:27:19Z, 2010:08:19 11:28:09Z, 2010:08:19 11:29:08Z, 2010:08:19 11:30:29Z, 2010:08:19 11:32:15Z, 2010:08:19 11:34:20Z, 2010:08:19 11:47:29Z, 2010:08:19 11:51Z, 2010:08:19 11:52:49Z, 2010:08:19 12:28:13Z, 2010:08:19 13:51:19Z, 2010:08:19 13:58:19Z, 2010:08:19 14:37:14Z, 2010:08:19 14:41:13Z, 2010:08:19 14:42Z, 2010:08:19 14:43:11Z, 2010:08:19 14:45:04Z, 2010:08:19 14:46:59Z, 2010:08:19 14:50:14Z, 2010:08:19 14:54:56Z, 2010:08:19 15:07:46Z, 2010:08:19 15:12:53Z, 2010:08:23 09:25:23-04:00, 2010:08:23 09:27:01-04:00, 2010:08:23 09:30:08-04:00, 2010:08:23 09:32:11-04:00, 2010:08:23 09:36:13-04:00, 2010:08:23 09:37:06-04:00, 2010:08:23 09:38:40-04:00, 2010:08:23 09:40:46-04:00, 2010:08:23 09:44:07-04:00, 2010:08:23 09:48:15-04:00, 2010:08:23 09:49:27-04:00, 2010:08:23 09:49:49-04:00, 2010:08:23 09:52:56-04:00, 2010:08:23 09:54:34-04:00, 2010:08:23 09:55:25-04:00, 2010:08:23 09:55:36-04:00, 2010:08:23 10:03:12-04:00, 2010:08:23 10:04:50-04:00, 2010:08:23 10:12:01-04:00, 2010:08:23 10:13:46-04:00, 2010:08:23 10:17:03-04:00, 2010:08:23 10:21:11-04:00, 2010:08:23 10:21:37-04:00, 2010:08:23 10:23:09-04:00, 2010:08:23 10:29:20-04:00, 2010:08:23 10:38:54-04:00, 2010:08:23 10:53:22-04:00, 2010:08:23 10:56:48-04:00, 2010:08:23 10:58:34-04:00, 2010:08:23 11:00:35-04:00, 2010:08:23 11:01:02-04:00, 2010:08:23 11:03:35-04:00, 2010:08:23 11:12:48-04:00, 2010:08:23 11:16:15-04:00, 2010:08:23 11:16:31-04:00, 2010:08:23 11:17:53-04:00, 2010:08:23 11:18:16-04:00, 2010:08:23 11:21:34-04:00, 2010:08:23 11:22:22-04:00, 2010:08:23 11:22:45-04:00, 2010:08:23 11:23:31-04:00, 2010:08:23 11:27:08-04:00, 2010:08:23 11:27:26-04:00, 2010:08:23 11:46:06-04:00, 2010:08:23 11:50:33-04:00, 2010:08:23 11:50:44-04:00, 2010:08:23 11:54:24-04:00, 2010:08:23 12:05:12-04:00, 2010:08:23 12:09:43-04:00, 2010:08:23 12:18:23-04:00, 2010:08:23 12:19:15-04:00, 2010:08:23 12:21:09-04:00, 2010:08:23 12:22:02-04:00, 2010:08:23 12:22:32-04:00, 2010:08:23 12:22:51-04:00, 2010:08:23 12:26:56-04:00, 2010:08:23 12:34:09-04:00, 2010:08:23 12:34:29-04:00, 2010:08:23 12:35:26-04:00, 2010:08:23 12:35:56-04:00, 2010:08:23 12:36:19-04:00, 2010:08:23 12:52:56-04:00, 2010:08:23 14:11:02-04:00, 2010:08:23 14:13:16-04:00, 2010:08:23 14:15:08-04:00, 2010:08:23 14:26:31-04:00, 2010:08:23 14:28:19-04:00, 2010:08:23 14:31:19-04:00, 2010:08:23 14:39:36-04:00, 2010:08:23 14:48:51-04:00, 2010:08:23 14:59:10-04:00, 2010:08:23 15:01:10-04:00, 2010:08:23 15:04:09-04:00, 2010:08:23 15:05:31-04:00, 2010:08:23 15:06:36-04:00, 2010:08:23 15:09:30-04:00, 2010:08:23 15:12:39-04:00, 2010:08:23 15:13:54-04:00, 2010:08:23 15:14:15-04:00, 2010:08:23 15:15:38-04:00, 2010:08:23 15:16:33-04:00, 2010:08:23 15:19:32-04:00, 2010:08:23 15:20:30-04:00, 2010:08:23 15:29:16-04:00, 2010:08:23 15:37:51-04:00, 2010:08:23 15:47-04:00, 2010:08:23 15:57:24-04:00, 2010:08:23 15:57:38-04:00, 2010:08:23 15:58:06-04:00, 2010:08:23 15:58:51-04:00, 2010:08:23 15:59:32-04:00, 2010:08:23 16:00:49-04:00, 2010:08:23 16:02:27-04:00, 2010:08:23 16:03:38-04:00, 2010:08:23 16:03:43-04:00, 2010:08:23 16:07:28-04:00, 2010:08:23 16:08:14-04:00, 2010:08:23 16:14:26-04:00, 2010:08:23 16:15:15-04:00, 2010:08:23 16:16:05-04:00, 2010:08:23 16:26:20-04:00, 2010:08:30 14:21:22-04:00, 2010:08:30 14:26:39-04:00, 2010:08:30 14:28:07-04:00, 2010:08:30 14:29:17-04:00, 2010:08:30 14:30:35-04:00, 2010:08:30 14:31:12-04:00, 2010:08:30 14:31:46-04:00, 2010:08:30 14:32:23-04:00, 2010:08:30 14:32:56-04:00, 2010:08:30 14:33:33-04:00, 2010:08:30 14:37:09-04:00, 2010:08:30 14:46:06-04:00, 2010:08:30 14:52:36-04:00, 2010:08:30 14:54:10-04:00, 2010:08:30 15:14:19-04:00, 2010:08:30 15:15:39-04:00, 2010:08:30 15:18:07-04:00, 2010:08:30 15:19:25-04:00, 2010:08:30 15:20:17-04:00, 2010:08:30 15:21:13-04:00, 2010:08:30 15:23:46-04:00, 2010:08:30 15:26:01-04:00, 2010:08:30 15:38:30-04:00, 2010:08:30 15:45:37-04:00, 2010:08:30 15:46:33-04:00, 2010:08:30 15:49:33-04:00, 2010:08:30 15:55:10-04:00, 2010:08:30 15:58:41-04:00, 2010:08:30 16:01:33-04:00, 2010:08:30 16:02:31-04:00, 2010:08:30 16:03:32-04:00, 2010:08:30 16:04:52-04:00, 2010:08:30 16:06:03-04:00, 2010:08:30 16:09:36-04:00, 2010:08:30 16:11:48-04:00, 2010:08:30 16:21:01-04:00, 2010:08:30 16:47:43-04:00, 2010:08:30 16:51:19-04:00, 2010:08:30 16:55:16-04:00, 2010:08:30 16:55:34-04:00, 2010:08:30 16:58:26-04:00, 2010:08:30 16:58:50-04:00, 2010:08:30 17:00-04:00, 2010:08:30 17:02:32-04:00, 2010:08:30 17:07:19-04:00, 2010:08:30 17:08:08-04:00, 2010:08:30 17:10:01-04:00, 2010:08:30 17:10:10-04:00, 2010:08:30 17:11:07-04:00, 2010:08:30 17:11:57-04:00, 2010:08:30 17:16:35-04:00, 2010:08:30 17:16:51-04:00, 2010:08:30 17:45:41-04:00, 2010:08:31 09:58:39-04:00, 2010:08:31 15:06:51-04:00, 2010:08:31 15:10:47-04:00, 2010:08:31 15:23:44-04:00, 2010:08:31 15:24:37-04:00, 2010:08:31 15:27:05-04:00, 2010:08:31 15:33:23-04:00, 2010:08:31 15:38:15-04:00, 2010:08:31 15:39:43-04:00, 2010:08:31 15:42:50-04:00, 2010:08:31 16:03:31-04:00, 2010:08:31 16:19:13-04:00, 2010:08:31 16:21:06-04:00, 2010:08:31 16:25:23-04:00, 2010:08:31 16:37-04:00, 2010:08:31 16:43:34-04:00, 2010:08:31 16:47:10-04:00, 2010:08:31 16:47:31-04:00, 2010:08:31 16:47:54-04:00, 2010:08:31 16:48:23-04:00, 2010:08:31 16:48:35-04:00, 2010:08:31 16:51:47-04:00, 2010:08:31 16:55:33-04:00, 2010:08:31 16:55:38-04:00, 2010:09:01 09:59:38-04:00, 2010:09:01 10:02:24-04:00, 2010:09:01 10:04:01-04:00, 2010:09:01 10:04:41-04:00, 2010:09:01 10:12-04:00, 2010:09:01 10:16-04:00, 2010:09:01 10:44:50-04:00, 2010:09:01 11:05-04:00, 2010:09:01 11:05:22-04:00, 2010:09:01 11:05:47-04:00, 2010:09:01 11:06:16-04:00, 2010:09:01 11:08:50-04:00, 2010:09:01 11:10:08-04:00, 2010:09:01 11:10:13-04:00, 2010:09:01 11:11:22-04:00, 2010:09:01 11:11:57-04:00, 2010:09:01 11:15:40-04:00, 2010:09:01 11:17:38-04:00, 2010:09:01 11:22:36-04:00, 2010:09:01 11:27:36-04:00, 2010:09:29 13:44:17-04:00, 2010:09:29 13:47:53-04:00, 2010:09:29 14:26:22-04:00, 2010:09:29 14:27:21-04:00, 2010:09:29 14:35:40-04:00, 2010:09:29 14:46:19-04:00, 2010:09:29 14:48:58-04:00, 2010:09:29 14:58:35-04:00, 2010:09:29 15:00:21-04:00, 2010:09:29 15:00:42-04:00, 2010:09:29 15:01:30-04:00, 2010:09:29 15:11:55-04:00, 2010:09:29 15:14:11-04:00, 2010:09:29 15:37:05-04:00, 2010:09:29 16:17:36-04:00, 2010:09:29 18:10:44-04:00, 2010:09:29 18:40:45-04:00, 2010:09:29 18:43:12-04:00, 2010:09:29 18:49:23-04:00, 2010:09:29 18:52:18-04:00, 2010:09:29 19:01:57-04:00, 2010:10:01 17:04:46-04:00, 2010:10:01 17:18:51-04:00, 2010:10:01 17:19:34-04:00, 2010:10:01 17:30:13-04:00, 2010:10:01 17:30:38-04:00, 2010:10:01 17:32:22-04:00, 2010:10:01 17:37:36-04:00, 2010:10:01 17:38:07-04:00, 2010:10:01 17:43:37-04:00, 2010:10:14 09:19:47-04:00, 2010:10:14 10:00:41-04:00, 2010:10:14 10:16:30-04:00, 2010:10:14 10:34:29-04:00, 2010:10:14 10:38:58-04:00, 2010:10:14 10:41:08-04:00, 2010:10:14 10:42:55-04:00, 2010:10:14 10:43:21-04:00, 2010:10:14 10:45:24-04:00, 2010:10:14 10:45:41-04:00, 2010:10:14 10:46:01-04:00, 2010:10:14 10:46:38-04:00, 2010:10:14 10:49:31-04:00, 2010:10:14 11:26:27-04:00, 2010:10:14 11:31:07-04:00, 2010:10:14 11:31:52-04:00, 2010:10:14 11:50:28-04:00, 2010:10:14 11:50:41-04:00, 2010:10:14 11:53-04:00, 2010:10:14 11:53:15-04:00, 2010:10:14 11:57:20-04:00, 2010:10:14 12:14:05-04:00, 2010:10:14 12:16:17-04:00, 2010:10:14 12:55:10-04:00, 2010:10:14 12:55:35-04:00, 2010:10:14 12:57:07-04:00, 2010:10:14 13:43:42-04:00, 2010:10:14 13:45:13-04:00, 2010:10:14 13:54:37-04:00, 2010:10:14 13:59:07-04:00, 2010:10:14 14:10:14-04:00, 2010:10:14 14:10:37-04:00, 2010:10:14 14:10:45-04:00, 2010:10:14 14:21:55-04:00, 2010:10:14 14:24:03-04:00, 2010:10:14 14:25:12-04:00, 2010:10:14 14:29:05-04:00, 2010:10:14 14:33:45-04:00, 2010:10:14 14:34:40-04:00, 2010:10:14 14:36:05-04:00, 2010:10:14 14:42:07-04:00, 2010:10:14 14:48:01-04:00, 2010:10:14 14:48:32-04:00, 2010:10:14 14:50:18-04:00, 2010:10:14 14:50:45-04:00, 2010:10:14 14:58:04-04:00, 2010:10:14 15:05:28-04:00, 2010:10:14 15:05:47-04:00, 2010:10:14 15:07:36-04:00, 2010:10:14 15:07:47-04:00, 2010:10:14 15:09:05-04:00, 2010:10:14 15:09:54-04:00, 2010:10:14 15:12:26-04:00, 2010:10:14 15:13:24-04:00, 2010:10:14 15:13:38-04:00, 2010:10:14 15:15:59-04:00, 2010:10:14 15:18:12-04:00, 2010:10:14 15:21:23-04:00, 2010:10:14 15:52:34-04:00, 2010:10:14 16:22:41-04:00, 2010:10:14 16:30:04-04:00, 2010:10:15 09:18:55-04:00, 2010:10:15 09:21:53-04:00, 2010:10:15 09:22:05-04:00, 2010:10:15 09:25:10-04:00, 2010:10:15 09:26:24-04:00, 2010:10:15 09:34:52-04:00, 2010:10:15 09:35:34-04:00, 2010:10:15 09:35:59-04:00, 2010:10:15 09:38:33-04:00, 2010:10:15 09:39:53-04:00, 2010:10:15 09:53:51-04:00, 2010:10:15 09:55:39-04:00, 2010:10:15 10:00:18-04:00, 2010:10:15 10:02:28-04:00, 2010:10:15 10:03:38-04:00, 2010:10:15 10:03:49-04:00, 2010:10:15 10:06:47-04:00, 2010:10:15 10:11:23-04:00, 2010:10:15 10:11:55-04:00, 2010:10:15 10:13:39-04:00, 2010:10:15 10:15:43-04:00, 2010:10:15 10:18:21-04:00, 2010:10:15 10:23:16-04:00, 2010:10:15 10:26-04:00, 2010:10:15 10:39:45-04:00, 2010:10:15 12:14:49-04:00, 2010:10:15 12:15:03-04:00, 2010:10:15 12:18:46-04:00, 2010:10:15 12:19:39-04:00, 2010:10:15 12:35:49-04:00, 2010:10:15 12:36:25-04:00, 2010:10:15 13:34:41-04:00, 2010:10:15 13:35:18-04:00, 2010:10:15 13:36:17-04:00, 2010:10:15 13:40:18-04:00, 2010:10:15 13:40:58-04:00, 2010:10:15 13:41:12-04:00, 2010:10:15 13:43:34-04:00, 2010:10:15 13:54:50-04:00, 2010:10:15 14:18:12-04:00, 2010:10:15 14:18:25-04:00, 2010:10:15 14:22:55-04:00, 2010:10:15 14:26:22-04:00, 2010:10:15 14:29:29-04:00, 2010:10:15 14:31:14-04:00, 2010:10:15 14:32:11-04:00, 2010:10:15 14:33:24-04:00, 2010:10:15 14:45:38-04:00, 2010:10:15 14:49:22-04:00, 2010:10:15 15:02:08-04:00, 2010:10:15 15:04:01-04:00, 2010:10:15 15:05:19-04:00, 2010:10:15 15:09:25-04:00, 2010:10:15 15:10:48-04:00, 2010:10:15 15:12:38-04:00, 2010:10:15 15:19:08-04:00, 2010:10:15 15:24:27-04:00, 2010:10:15 15:25:58-04:00, 2010:10:15 15:39:41-04:00, 2010:10:15 15:41:34-04:00, 2010:10:15 15:41:46-04:00, 2010:10:15 15:44:45-04:00, 2010:10:15 15:47:04-04:00, 2010:10:15 16:25:56-04:00, 2010:10:15 16:26:57-04:00, 2010:10:15 17:06:01-04:00, 2010:10:15 17:14:17-04:00, 2010:10:15 17:15:22-04:00, 2010:10:15 17:15:32-04:00, 2010:10:15 17:16:01-04:00, 2010:10:15 17:16:50-04:00, 2010:10:15 17:20:23-04:00, 2010:10:16 10:56:20-04:00, 2010:10:16 11:01:26-04:00, 2010:10:16 11:08:25-04:00, 2010:10:16 11:10:54-04:00, 2010:10:16 11:14:05-04:00, 2010:10:16 11:14:28-04:00, 2010:10:16 11:20:33-04:00, 2010:10:16 11:23:39-04:00, 2010:10:16 11:35:55-04:00, 2010:10:16 11:57:17-04:00, 2010:10:16 11:59:14-04:00, 2010:10:16 11:59:46-04:00, 2010:10:16 12:00:30-04:00, 2010:10:16 12:03:45-04:00, 2010:10:16 12:04-04:00, 2010:10:16 12:05:33-04:00, 2010:10:16 12:09:43-04:00, 2010:10:16 12:09:53-04:00, 2010:10:16 12:11:15-04:00, 2010:10:16 12:16:14-04:00, 2010:10:16 12:21:08-04:00, 2010:10:16 12:26:17-04:00, 2010:10:16 12:31:43-04:00, 2010:10:16 12:31:58-04:00, 2010:10:16 12:43:45-04:00, 2010:10:16 12:45:43-04:00, 2010:10:16 12:51:42-04:00, 2010:10:16 13:23:04-04:00, 2010:10:16 13:30:07-04:00, 2010:10:16 14:29-04:00, 2010:10:16 14:29:33-04:00, 2010:10:16 14:31:31-04:00, 2010:10:16 14:34:29-04:00, 2010:10:16 14:34:35-04:00, 2010:10:16 14:39:02-04:00, 2010:10:16 14:40:38-04:00, 2010:10:16 14:41:37-04:00, 2010:10:16 14:42-04:00, 2010:10:16 15:07:33-04:00, 2010:10:16 15:26:19-04:00, 2010:10:16 15:26:53-04:00, 2010:10:16 15:28:19-04:00, 2010:10:16 15:41:49-04:00, 2010:10:16 15:43:05-04:00, 2010:10:16 15:46:24-04:00, 2010:10:18 17:35:48-04:00, 2010:10:19 08:36:52-04:00, 2010:10:19 08:36:55-04:00, 2010:10:19 08:42-04:00, 2010:10:19 08:43:44-04:00, 2010:10:19 08:53:12-04:00, 2010:10:19 08:54:50-04:00, 2010:10:19 08:59:17-04:00, 2010:10:19 09:00:10-04:00, 2010:10:19 09:15:19-04:00, 2010:10:19 09:18:08-04:00, 2010:10:19 09:21:05-04:00, 2010:10:19 09:22:43-04:00, 2010:10:19 09:24:34-04:00, 2010:10:19 09:25:48-04:00, 2010:10:19 09:26:46-04:00, 2010:10:19 09:29:12-04:00, 2010:10:19 09:30-04:00, 2010:10:19 09:31:25-04:00, 2010:10:19 09:33:29-04:00, 2010:10:19 09:36:47-04:00, 2010:10:19 09:39:48-04:00, 2010:10:19 09:58:04-04:00, 2010:10:19 09:58:22-04:00, 2010:10:19 10:01:30-04:00, 2010:10:19 10:11:20-04:00, 2010:10:19 10:14:02-04:00, 2010:10:19 10:15:22-04:00, 2010:10:19 10:16:23-04:00, 2010:10:19 10:17:07-04:00, 2010:10:19 10:18:12-04:00, 2010:10:19 10:24:31-04:00, 2010:10:19 10:27:35-04:00, 2010:10:19 10:35:31-04:00, 2010:10:19 10:43:09-04:00, 2010:10:19 10:46:09-04:00, 2010:10:19 10:47:16-04:00, 2010:10:19 10:47:56-04:00, 2010:10:19 10:55:40-04:00, 2010:10:19 10:58:01-04:00, 2010:10:19 11:13:15-04:00, 2010:10:19 11:13:34-04:00, 2010:10:19 11:31:03-04:00, 2010:10:19 11:53:56-04:00, 2010:10:19 11:55:10-04:00, 2010:10:19 12:02:58-04:00, 2010:10:19 12:12:59-04:00, 2010:10:19 12:14:59-04:00, 2010:10:19 12:35:53-04:00, 2010:10:19 12:38:40-04:00, 2010:10:19 12:39:16-04:00, 2010:10:19 12:40:11-04:00, 2010:10:19 12:42:48-04:00, 2010:10:19 12:53:48-04:00, 2010:10:19 12:57:41-04:00, 2010:10:19 13:43:12-04:00, 2010:10:19 13:57:03-04:00, 2010:10:19 14:02:01-04:00, 2010:10:19 14:02:40-04:00, 2010:10:19 14:03:17-04:00, 2010:10:19 14:04:03-04:00, 2010:10:19 14:04:24-04:00, 2010:10:19 14:07:21-04:00, 2010:10:19 14:08:20-04:00, 2010:10:19 14:10:58-04:00, 2010:10:19 14:13:29-04:00, 2010:10:19 14:16:02-04:00, 2010:10:19 14:16:55-04:00, 2010:10:19 14:17:54-04:00, 2010:10:19 14:19:03-04:00, 2010:10:19 14:19:56-04:00, 2010:10:19 14:29:12-04:00, 2010:10:19 14:30:22-04:00, 2010:10:19 14:31:23-04:00, 2010:10:19 14:32:01-04:00, 2010:10:19 14:32:36-04:00, 2010:10:19 14:33:16-04:00, 2010:10:19 14:35:08-04:00, 2010:10:19 14:38:17-04:00, 2010:10:19 14:40:04-04:00, 2010:10:19 14:41:04-04:00, 2010:10:19 14:42:11-04:00, 2010:10:19 14:43:46-04:00, 2010:10:19 15:11:48-04:00, 2010:10:19 15:18:06-04:00, 2010:10:19 15:43:30-04:00, 2010:10:19 15:57:03-04:00, 2010:10:19 16:01:31-04:00, 2010:10:19 16:02:54-04:00, 2010:10:19 16:16:38-04:00, 2010:10:19 16:22:39-04:00, 2010:10:19 16:23:56-04:00, 2010:10:19 16:24:10-04:00, 2010:10:19 16:34:38-04:00, 2010:10:19 16:38:06-04:00, 2010:10:19 16:39:31-04:00, 2010:10:19 16:41:28-04:00, 2010:10:19 16:42:47-04:00, 2010:10:19 16:45:07-04:00, 2010:10:19 16:45:54-04:00, 2010:10:19 16:46:42-04:00, 2010:10:19 16:47:41-04:00, 2010:10:19 16:48:20-04:00, 2010:10:19 16:49:14-04:00, 2010:10:19 16:50-04:00, 2010:10:19 16:51:51-04:00, 2010:10:19 16:53:11-04:00, 2010:10:19 16:55:34-04:00, 2010:10:19 16:56:47-04:00, 2010:10:19 17:04:52-04:00, 2010:10:19 17:08:19-04:00, 2010:10:19 17:12:22-04:00, 2010:10:19 17:14-04:00, 2010:10:19 17:16:03-04:00, 2010:10:19 17:18:17-04:00, 2010:10:19 17:18:47-04:00, 2010:10:19 17:19:53-04:00, 2010:10:19 17:20:17-04:00, 2010:10:19 17:20:59-04:00, 2010:10:19 17:21:13-04:00, 2010:10:19 17:22:02-04:00, 2010:10:19 17:28:28-04:00, 2010:10:19 17:32:12-04:00, 2010:10:19 17:33:30-04:00, 2010:10:19 17:35:20-04:00, 2010:10:19 17:36:49-04:00, 2010:10:19 17:37:41-04:00, 2010:10:19 17:37:56-04:00, 2010:10:19 17:39:36-04:00, 2010:10:19 17:45:35-04:00, 2010:10:19 17:47:23-04:00, 2010:10:19 17:50:45-04:00, 2010:10:19 17:51:52-04:00, 2010:10:19 17:58:57-04:00, 2010:10:19 18:05:52-04:00, 2010:10:20 07:41:11-04:00, 2010:10:20 07:44:01-04:00, 2010:10:20 07:48:24-04:00, 2010:10:20 17:01:05-04:00, 2010:10:22 16:02:30-04:00, 2010:10:22 16:47:21-04:00, 2010:10:25 08:25:19-04:00, 2010:10:25 08:59:04-04:00, 2010:10:25 10:24:30-04:00, 2010:10:25 10:34:13-04:00, 2010:10:25 10:53:58-04:00, 2010:10:25 11:07:34-04:00, 2010:10:25 11:17:36-04:00, 2010:10:25 11:29:33-04:00, 2010:10:25 11:38:53-04:00, 2010:10:25 11:41:35-04:00, 2010:10:25 13:36:47-04:00, 2010:10:26 09:52:33-04:00, 2010:10:26 09:52:35-04:00, 2010:10:26 09:56:36-04:00, 2010:10:26 09:56:48-04:00, 2010:10:26 10:18:15-04:00, 2010:10:26 10:18:23-04:00, 2010:10:26 10:20:29-04:00, 2010:10:26 10:20:43-04:00, 2010:10:26 10:22:17-04:00, 2010:10:26 10:29-04:00, 2010:10:26 10:38:20-04:00, 2010:10:26 10:42:14-04:00, 2010:10:26 10:43:55-04:00, 2010:10:26 11:13:01-04:00, 2010:10:26 11:14:38-04:00, 2010:10:26 11:34:36-04:00, 2010:10:26 11:43:41-04:00, 2010:10:26 11:46:44-04:00, 2010:10:26 12:23:48-04:00, 2010:10:26 13:14:42-04:00, 2010:10:26 14:45:54-04:00, 2010:10:26 15:19:16-04:00, 2010:10:26 15:31:17-04:00, 2010:10:26 15:34:23-04:00, 2010:10:27 09:59:11-04:00, 2010:10:27 13:43:50-04:00, 2010:10:27 14:47:36-04:00, 2010:10:27 14:54:27-04:00, 2010:10:27 15:24:47-04:00, 2010:10:27 15:55:04-04:00, 2010:10:28 11:32:17-04:00, 2010:10:28 11:56:46-04:00, 2010:10:28 12:03:43-04:00, 2010:10:28 12:46:03-04:00, 2010:10:28 13:11:18-04:00, 2010:10:28 13:32:13-04:00, 2010:10:28 13:34:43-04:00, 2010:10:28 14:32:06-04:00, 2010:10:28 14:40:41-04:00, 2010:10:28 15:06:04-04:00, 2010:10:28 15:15:54-04:00, 2010:10:28 15:17:51-04:00, 2010:10:28 15:19-04:00, 2010:10:28 15:19:30-04:00, 2010:10:28 15:38:41-04:00, 2010:10:28 15:45:33-04:00, 2010:10:28 17:45:35-04:00, 2010:10:28 17:59:29-04:00, 2010:10:28 18:03:16-04:00, 2010:10:28 18:13:05-04:00, 2010:10:28 18:13:49-04:00, 2010:10:28 18:28:09-04:00, 2010:10:28 18:36:10-04:00, 2010:10:29 09:30:08-04:00, 2010:10:29 10:39:12-04:00, 2010:11:02 15:43:17-04:00, 2010:11:03 08:45:10-04:00, 2010:11:03 08:58:20-04:00, 2010:11:03 09:00:45-04:00, 2010:11:03 09:19:29-04:00, 2010:11:03 09:32:39-04:00, 2010:11:03 09:39:38-04:00, 2010:11:03 09:39:55-04:00, 2010:11:03 09:53:24-04:00, 2010:11:03 10:46:58-04:00, 2010:11:03 11:49:41-04:00, 2010:11:03 11:55:20-04:00, 2010:11:03 12:09:10-04:00, 2010:11:03 12:12:04-04:00, 2010:11:03 12:14:39-04:00, 2010:11:03 12:22:29-04:00, 2010:11:03 12:34:45-04:00, 2010:11:03 13:40:38-04:00, 2010:11:04 17:13-04:00, 2010:11:04 17:13:03-04:00, 2010:11:04 17:13:26-04:00, 2010:11:04 17:20:58-04:00, 2010:11:04 17:33:07-04:00, 2010:11:04 17:46:19-04:00, 2010:11:08 15:47:03-05:00, 2010:11:08 15:51:32-05:00, 2010:11:08 15:52:55-05:00, 2010:11:08 15:53:28-05:00, 2010:11:08 15:54:18-05:00, 2010:11:08 15:59:55-05:00, 2010:11:08 16:03:17-05:00, 2010:11:08 16:58:38-05:00, 2010:11:08 17:01:33-05:00, 2010:11:08 17:07:44-05:00, 2010:11:08 17:09:55-05:00, 2010:11:08 17:26:50-05:00, 2010:11:08 17:28:21-05:00, 2010:11:08 17:29:57-05:00, 2010:11:08 17:33:41-05:00, 2010:11:08 17:38:35-05:00, 2010:11:09 07:56:41-05:00, 2010:11:09 08:40:07-05:00, 2010:11:09 08:41:55-05:00, 2010:11:09 08:50:24-05:00, 2010:11:10 10:42:45-05:00, 2010:11:10 11:25:59-05:00, 2010:11:10 12:56:45-05:00, 2010:11:10 13:17:42-05:00, 2010:11:10 13:18:42-05:00, 2010:11:10 13:22:32-05:00, 2010:11:10 13:36:54-05:00, 2010:11:10 16:28:59-05:00, 2010:11:10 16:43:24-05:00, 2010:11:11 10:04:39-05:00, 2010:11:11 10:25:51-05:00, 2010:11:11 11:11:52-05:00, 2010:11:11 11:17:43-05:00, 2010:11:11 11:38:40-05:00, 2010:11:11 11:39:34-05:00, 2010:11:11 12:34:06-05:00, 2010:11:11 12:37:43-05:00, 2010:11:11 12:47-05:00, 2010:11:11 16:40:17-05:00, 2010:11:11 16:43:01-05:00, 2010:11:11 17:05:32-05:00, 2010:11:11 17:21:10-05:00, 2010:11:11 17:48:58-05:00, 2010:11:11 17:50:29-05:00, 2010:11:11 18:00:34-05:00, 2010:11:12 09:21:03-05:00, 2010:11:12 09:23:50-05:00, 2010:11:12 09:29:06-05:00, 2010:11:12 09:34:10-05:00, 2010:11:12 09:37:09-05:00, 2010:11:12 09:41:38-05:00, 2010:11:12 09:42:53-05:00, 2010:11:12 09:43:49-05:00, 2010:11:12 09:44:43-05:00, 2010:11:12 09:56:06-05:00, 2010:11:12 10:07:31-05:00, 2010:11:12 10:09:32-05:00, 2010:11:12 10:23:35-05:00, 2010:11:12 10:24:55-05:00, 2010:11:12 10:27:05-05:00, 2010:11:12 10:28:22-05:00, 2010:11:12 11:07:30-05:00, 2010:11:12 11:11:37-05:00, 2010:11:12 11:24:11-05:00, 2010:11:12 11:25:59-05:00, 2010:11:12 11:27:22-05:00, 2010:11:12 11:32:01-05:00, 2010:11:12 11:32:16-05:00, 2010:11:12 11:42:29-05:00, 2010:11:12 11:46:21-05:00, 2010:11:12 11:47:30-05:00, 2010:11:12 11:49:50-05:00, 2010:11:12 11:50:49-05:00, 2010:11:12 11:50:58-05:00, 2010:11:12 11:52:09-05:00, 2010:11:12 11:56:08-05:00, 2010:11:12 11:57:28-05:00, 2010:11:12 11:57:58-05:00, 2010:11:12 13:51-05:00, 2010:11:12 13:51:10-05:00, 2010:11:12 13:51:10-05:00, 2010:11:12 14:16:59-05:00, 2010:11:12 14:19:21-05:00, 2010:11:12 14:19:32-05:00, 2010:11:12 14:47:58-05:00, 2010:11:12 14:48:33-05:00, 2010:11:12 14:49:27-05:00, 2010:11:12 14:50:59-05:00, 2010:11:12 14:51:14-05:00, 2010:11:12 14:52:58-05:00, 2010:11:12 14:54:03-05:00, 2010:11:12 14:58:44-05:00, 2010:11:12 14:59:56-05:00, 2010:11:12 15:01:31-05:00, 2010:11:12 15:01:57-05:00, 2010:11:12 15:02:30-05:00, 2010:11:12 15:08:10-05:00, 2010:11:12 15:12:31-05:00, 2010:11:12 15:13:34-05:00, 2010:11:12 15:16:13-05:00, 2010:11:12 15:19:11-05:00, 2010:11:12 15:19:19-05:00, 2010:11:12 15:19:19-05:00, 2010:11:12 15:25:19-05:00, 2010:11:12 15:26:25-05:00, 2010:11:12 15:26:46-05:00, 2010:11:15 16:00:30-05:00, 2010:11:15 16:06:05-05:00, 2010:11:15 16:06:05-05:00, 2010:11:15 16:12:02-05:00, 2010:11:15 16:15:29-05:00, 2010:11:15 16:24:40-05:00, 2010:11:15 16:25:58-05:00, 2010:11:15 16:34:24-05:00, 2010:11:15 17:10:08-05:00, 2010:11:15 17:16:32-05:00, 2010:11:15 17:26:36-05:00, 2010:11:15 17:29:15-05:00, 2010:11:15 17:38:02-05:00, 2010:11:16 11:08:03-05:00, 2010:11:16 11:29:12-05:00, 2010:11:16 11:29:49-05:00, 2010:11:16 14:32:33-05:00, 2010:11:16 14:51:29-05:00, 2010:11:16 15:36-05:00, 2010:11:16 15:56:20-05:00, 2010:11:16 16:27:10-05:00, 2010:11:16 16:49:44-05:00, 2010:11:16 16:53:33-05:00, 2010:11:16 17:07:29-05:00, 2010:11:16 17:16:16-05:00, 2010:11:19 10:10:37-05:00, 2010:11:19 10:25:37-05:00, 2010:11:19 10:36:40-05:00, 2010:11:19 10:40:32-05:00, 2010:11:19 10:43:55-05:00, 2010:11:19 10:44:17-05:00, 2010:11:19 10:51:12-05:00, 2010:11:19 10:53:46-05:00, 2010:11:19 10:56:25-05:00, 2010:11:19 11:14:05-05:00, 2010:11:19 11:18:53-05:00, 2010:11:19 11:29:17-05:00, 2010:11:19 11:53:48-05:00, 2010:11:19 12:00:51-05:00, 2010:11:19 12:07:19-05:00, 2010:11:19 12:11:12-05:00, 2010:11:19 12:11:49-05:00, 2010:11:19 12:22:04-05:00, 2010:11:19 14:30:36-05:00, 2010:11:19 15:02:41-05:00, 2010:11:19 15:02:55-05:00, 2010:11:19 15:02:55-05:00, 2010:11:19 15:05:04-05:00, 2010:11:19 15:11:50-05:00, 2010:11:19 15:12:31-05:00, 2010:11:19 16:41:01-05:00, 2010:11:19 16:43:32-05:00, 2010:11:19 16:44:32-05:00, 2010:11:19 16:45:07-05:00, 2010:11:19 16:46:42-05:00, 2010:11:19 16:47:54-05:00, 2010:11:19 16:49:26-05:00, 2010:11:19 17:18:29-05:00, 2010:11:19 17:20:28-05:00, 2010:11:19 17:21:46-05:00, 2010:11:19 17:22:58-05:00, 2010:11:19 17:26:52-05:00, 2010:11:19 17:28:02-05:00, 2010:11:19 17:49:56-05:00, 2010:12:01 17:17:24-05:00, 2010:12:01 17:20:01-05:00, 2010:12:01 17:23:10-05:00, 2010:12:01 17:35:31-05:00, 2010:12:02 09:04:09-05:00, 2010:12:02 09:12:37-05:00, 2010:12:02 10:38:38-05:00, 2010:12:02 10:43:13-05:00, 2010:12:02 10:53:35-05:00, 2010:12:02 11:43:18-05:00, 2010:12:02 12:01:54-05:00, 2010:12:02 12:10:01-05:00, 2010:12:02 12:10:10-05:00, 2010:12:02 12:13:20-05:00, 2010:12:02 13:33:37-05:00, 2010:12:02 13:41:54-05:00, 2010:12:02 14:31:11-05:00, 2010:12:02 14:45:50-05:00, 2010:12:02 14:54:52-05:00, 2010:12:02 14:55:06-05:00, 2010:12:02 14:55:06-05:00, 2010:12:02 15:02:02-05:00, 2010:12:02 17:28:09-05:00, 2010:12:14 13:14:52-05:00, 2010:12:14 13:20:48-05:00, 2010:12:14 13:21:55-05:00, 2010:12:14 13:23:46-05:00, 2010:12:14 13:26:41-05:00, 2010:12:14 13:27:58-05:00, 2010:12:14 13:28:46-05:00, 2010:12:14 13:30:04-05:00, 2010:12:14 13:30:36-05:00, 2010:12:14 13:31:57-05:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0 History Changed : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, / Warning : [Minor] Extracted only 1000 xmpMM:History items. Ignore minor errors to extract all Derived From Instance ID : xmp.iid:F97F11740720681191099A541EFA6F17 Derived From Document ID : xmp.did:30E4EC711C2068118F62FC3142080E2A Derived From Original Document ID: xmp.did:08801174072068118F62B27DA71C414B Derived From Rendition Class : default Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 304.80, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 304.80, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 72.00, 300.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 72.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00, 300.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:1cb116b5-3164-ef4d-8f63-9e23a3910ddd, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:09801174072068118F628807AB351B33, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:09801174072068118F628807AB351B33, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, uuid:1af3b8b7-fb8a-cf4a-b168-0bd63b740366, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:1af3b8b7-fb8a-cf4a-b168-0bd63b740366, xmp.iid:571260DD200A1168A7BA9E5A720EBCD6, xmp.iid:69BE86491A206811A6138825DCF48047, xmp.iid:0980117407206811A6138825DCF48047, xmp.iid:66BE86491A206811A6138825DCF48047, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:0F06A14C17206811AC449920B32F1AFD, xmp.iid:1106A14C17206811AC449920B32F1AFD, xmp.iid:06801174072068118F62C061682660AA, xmp.iid:1506A14C17206811AC449920B32F1AFD, xmp.iid:1406A14C17206811AC449920B32F1AFD, xmp.iid:1606A14C17206811AC449920B32F1AFD, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:3A5D63EE32206811AC449920B32F1AFD, xmp.iid:3B5D63EE32206811AC449920B32F1AFD, xmp.iid:07801174072068118DBBF9A121DD829A, xmp.iid:0480117407206811A6138825DCF48047, xmp.iid:0580117407206811A6138825DCF48047, xmp.iid:0680117407206811A6138825DCF48047, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, uuid:c5e72cdf-f7b8-2f47-8ee6-8f4bbbccc122, uuid:852195c0-063f-054f-a401-42dd17b44cfd, uuid:5371C89252EEDF11AD2AE59502B441BE, uuid:93669a75-8c6d-2240-8f7f-46eb7271b693, uuid:1ced1a00-76e3-014b-ab7b-d2a62535229c, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:735cd351-efd5-4003-a3ed-b566071dcd11, uuid:f2316465-af0a-45fa-88ce-cdf0e0b7b39e, uuid:69605ebc-27d5-4d09-a5ee-125c73ce472a, uuid:1b560e15-6aaf-4475-a382-01e3eec0d504, uuid:078927a7-cb58-4d12-b0b4-7b9c7c0a5cfa, uuid:f2e44d13-c8a8-491d-b1e9-5fa8425eb301, uuid:775142cd-e634-4d0d-a485-b2dddcf112a9, uuid:40f41fc8-a186-4c5d-bf99-fdffa4954540, uuid:f222e8df-5b34-4e1e-9ca7-7762e7995eaa, uuid:16894505-c6ba-4b1a-bb35-e64105d7019f, uuid:2cf2bf54-1f75-408f-a5db-3acc9c9b36ba, uuid:acd1206f-cb29-42e5-a12b-7171668710b5, uuid:6315b4c4-aad4-49bc-9762-dd2004b2942d, uuid:f52e7304-69b2-4c12-b3ab-16b3dbef09c8, uuid:8a10306b-8801-4370-8e1b-a93126697e42, uuid:ec44cf8d-9fe7-4cb4-ba9c-a860245c788c, uuid:b0dae68c-43fe-124b-b82b-b9a2781103e0, uuid:5b55b1e5-8710-3f4e-bc0f-b31e6b3625bb, uuid:c27a9014-313e-fb4b-b5b9-a144ffe385ab, uuid:72eb4429-3d76-5147-b84c-1b46acd5c65b, uuid:e941b3d2-f639-4e4c-a8d0-25def3ce0d71, uuid:972c49b4-d002-0b42-986c-4f334dfa3c96, uuid:8f35a28a-507b-46c2-a34d-d7da4ab1b569, uuid:0116f0cc-8a45-462c-9921-49df82dec0ac, uuid:df568aba-e6e9-e041-a9e8-20577dd162d4, xmp.iid:018011740720681192B0D1C6EC66E5AD, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:6EBE86491A206811A6138825DCF48047, xmp.iid:BB342B2120206811A6138825DCF48047, xmp.iid:B8342B2120206811A6138825DCF48047, xmp.iid:B9342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:EC22F667201D1168A7BA9E5A720EBCD6, uuid:05c96b80-292f-a444-b1a6-797bef577082, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:E6EF40180D206811A961E48DBA39A859, xmp.iid:07801174072068118F62C061682660AA, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:E6EF40180D206811A961E48DBA39A859, xmp.iid:05801174072068118F62BCF61010169B, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:7FB6559B20171168A7BA9E5A720EBCD6, xmp.iid:FE7224E220171168A7BA9E5A720EBCD6, xmp.iid:49F490B020081168A7BA9E5A720EBCD6, xmp.iid:E2A69AF0200C1168A7BAC4618FE18CAD, xmp.iid:7FB6559C20171168A7BA9E5A720EBCD6, xmp.iid:7FB6559A20171168A7BA9E5A720EBCD6, xmp.iid:FE7224E420171168A7BA9E5A720EBCD6, xmp.iid:CB9E831D20091168A7BA9E5A720EBCD6, xmp.iid:49F490AF20081168A7BA9E5A720EBCD6, xmp.iid:FE7224E620171168A7BA9E5A720EBCD6, xmp.iid:79897E0E20161168A7BA9E5A720EBCD6, xmp.iid:49F490AE20081168A7BA9E5A720EBCD6, xmp.iid:74117FE420071168A7BA9E5A720EBCD6, xmp.iid:49F490B620081168A7BA9E5A720EBCD6, xmp.iid:108901A920091168A7BA9E5A720EBCD6, xmp.iid:108901AA20091168A7BA9E5A720EBCD6, xmp.iid:108901A820091168A7BA9E5A720EBCD6, xmp.iid:05801174072068118F62BCF61010169B, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:CC40F147200F1168A7BA9E5A720EBCD6, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:CC40F145200F1168A7BA9E5A720EBCD6, xmp.iid:0D01D5102014116895FEC5F977633FDF, uuid:a500d909-9092-7948-a5a1-86a39cb9e31d, xmp.iid:FE7224EA20171168A7BA9E5A720EBCD6, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:c01e46e5-dc99-432c-9679-4b4ad4240acd, uuid:d6cf3694-9145-5b40-af94-cb265d15816d, xmp.iid:1F1D4B333C2068119109D7FD3AA9BC93, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:C827FFDE200D1168A7BA9E5A720EBCD6, uuid:c01e46e5-dc99-432c-9679-4b4ad4240acd, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:F77F1174072068118F62DD8FAE72D5F1, xmp.iid:0D01D50A2014116895FEC5F977633FDF, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:8473467320131168A7BA9E5A720EBCD6, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:05bc3ec8-57e9-4487-80f0-e2261216489e, uuid:d6cf3694-9145-5b40-af94-cb265d15816d, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:8473467420131168A7BA9E5A720EBCD6, xmp.iid:8473467520131168A7BA9E5A720EBCD6, uuid:05bc3ec8-57e9-4487-80f0-e2261216489e, xmp.iid:0D01D5092014116895FEC5F977633FDF, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, uuid:a5419ddc-87c8-b941-b42e-c54e61aaff3d, uuid:d6cf3694-9145-5b40-af94-cb265d15816d, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:EDC5D4932014116895FEC5F977633FDF, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:28ebde24-7b75-6d4b-8131-96b690638f2e, xmp.iid:EDC5D4912014116895FEC5F977633FDF, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:8473467620131168A7BA9E5A720EBCD6, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:af825771-318b-3845-bb36-1b2b6707610c, uuid:d6cf3694-9145-5b40-af94-cb265d15816d, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:8473467720131168A7BA9E5A720EBCD6, uuid:2d34434f-d9f3-054c-893f-3a72b3ab7f1f, uuid:1e6f492b-ae61-2e46-b85d-b35ddc830329, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:8473467020131168A7BA9E5A720EBCD6, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:db6e7da5-65a5-bb47-864a-aaee9b822bf2, uuid:ae905a22-7430-344c-a139-0cb34e04540f, uuid:675c7b91-c25d-6c48-96c6-3df776fd0630, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:8473467120131168A7BA9E5A720EBCD6, uuid:db6e7da5-65a5-bb47-864a-aaee9b822bf2, uuid:ae905a22-7430-344c-a139-0cb34e04540f, uuid:675c7b91-c25d-6c48-96c6-3df776fd0630, xmp.iid:C827FFDB200D1168A7BA9E5A720EBCD6, xmp.iid:C827FFDC200D1168A7BA9E5A720EBCD6, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:EDC5D4982014116895FEC5F977633FDF, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:442ed82d-cd84-41dc-a670-5927dab3cc84, uuid:d6cf3694-9145-5b40-af94-cb265d15816d, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:BC22B3B820101168A7BA9E5A720EBCD6, uuid:99fb82e4-7a9a-4121-8952-fa66f27b5f6e, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, uuid:442ed82d-cd84-41dc-a670-5927dab3cc84, xmp.iid:EDC5D4982014116895FEC5F977633FDF, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:d6cf3694-9145-5b40-af94-cb265d15816d, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:442ed82d-cd84-41dc-a670-5927dab3cc84, xmp.iid:EDC5D4982014116895FEC5F977633FDF, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:EDC5D4982014116895FEC5F977633FDF, uuid:4c0a6405-b5e3-e14b-8ef7-9543d5fb669e, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:d6cf3694-9145-5b40-af94-cb265d15816d, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:02635323-3114-7845-af9b-246fb0e87cc8, uuid:9599490b-0aae-224c-8c5c-73d93c22afed, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:E5EF40180D206811A961E48DBA39A859, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:E5EF40180D206811A961E48DBA39A859, xmp.iid:74117FE420071168AB088CE19AC3BBE4, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:7FB6559620171168A7BA9E5A720EBCD6, xmp.iid:E6CFC37820161168A7BA9E5A720EBCD6, xmp.iid:7FB6559720171168A7BA9E5A720EBCD6, xmp.iid:E6CFC37A20161168A7BA9E5A720EBCD6, xmp.iid:7FB6559420171168A7BA9E5A720EBCD6, xmp.iid:7FB6559520171168A7BA9E5A720EBCD6, xmp.iid:E6CFC37720161168A7BA9E5A720EBCD6, xmp.iid:E6CFC37620161168A7BA9E5A720EBCD6, xmp.iid:61D4B0C520151168A7BA9E5A720EBCD6, xmp.iid:7FB6559320171168A7BA9E5A720EBCD6, xmp.iid:E6CFC37520161168A7BA9E5A720EBCD6, xmp.iid:7FB6559220171168A7BA9E5A720EBCD6, xmp.iid:CB9E831C20091168A7BA9E5A720EBCD6, xmp.iid:E6CFC37C20161168A7BA9E5A720EBCD6, xmp.iid:E6CFC37B20161168A7BA9E5A720EBCD6, xmp.iid:E9820E432015116895FEC5F977633FDF, xmp.iid:E9820E412015116895FEC5F977633FDF, xmp.iid:E9820E442015116895FEC5F977633FDF, xmp.iid:E9820E452015116895FEC5F977633FDF, xmp.iid:E9820E422015116895FEC5F977633FDF, xmp.iid:244AE4972016116895FEC5F977633FDF, xmp.iid:244AE4992016116895FEC5F977633FDF, xmp.iid:244AE4982016116895FEC5F977633FDF, xmp.iid:244AE4942016116895FEC5F977633FDF, xmp.iid:244AE4952016116895FEC5F977633FDF, xmp.iid:E9820E462015116895FEC5F977633FDF, xmp.iid:244AE49A2016116895FEC5F977633FDF, xmp.iid:244AE4962016116895FEC5F977633FDF, xmp.iid:74117FE420071168AB088CE19AC3BBE4, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:d6cf3694-9145-5b40-af94-cb265d15816d, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BC22B3B620101168A7BA9E5A720EBCD6, xmp.iid:CC40F148200F1168A7BA9E5A720EBCD6, uuid:fee29a7d-b850-3b4d-8e9d-248824e72a10, uuid:c3a79ca4-dbc5-f64a-b823-da7e8a561962, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:BC22B3B520101168A7BA9E5A720EBCD6, uuid:96a77286-c1ee-2946-b537-9bb50c4d5d14, xmp.iid:048011740720681195FED5213F2033DD, xmp.iid:74117FED20071168A7BAC4618FE18CAD, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:CC40F14A200F1168A7BA9E5A720EBCD6, xmp.iid:103A309420121168A7BA9E5A720EBCD6, uuid:c551008a-b15e-fc43-b2e4-2d3c35627365, uuid:f49ff679-323a-104d-a8e8-84bf4365e234, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:CC40F149200F1168A7BA9E5A720EBCD6, xmp.iid:BC22B3B720101168A7BA9E5A720EBCD6, uuid:56d19a1f-36f6-3141-932e-e377a38e4e60, uuid:096fce61-6ef8-0b4a-8f6c-ab7f915f9748, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:8387F9AE20111168A7BA9E5A720EBCD6, xmp.iid:8387F9AF20111168A7BA9E5A720EBCD6, uuid:c76fb49a-97a3-6f4c-98fd-226fba452c74, uuid:117b5941-2590-e94f-b19f-2986358161e8, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:07fc383d-0313-d742-8bb1-9b873dfd6649, uuid:90d184b8-6279-2d49-ad81-00559b7bf4ba, uuid:0d024440-b68a-ea4d-9b98-4940e83bc0ec, uuid:854ba1b9-34a8-cb45-be8a-50706b58f6e3, uuid:e43ea2ca-26a8-cc4c-9567-d00de7203ec1, uuid:0f033652-2d7f-f840-980f-85b717e46745, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, uuid:1908495c-ac0b-2d42-8129-76a44c344b7d, uuid:6d499e08-e40f-9b40-8c37-1a2657b92a21, uuid:d6797b94-e767-0248-a2ff-fb2f88e05158, uuid:a0b8c3c6-b776-4242-99ad-9c350ec79665, uuid:dc76aac7-4273-f845-961d-60699ae9e226, uuid:cb0e7363-70a6-0245-aba3-81737ed5968b, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:0b7ae7ba-9834-ea4e-be0e-f340e67361aa, uuid:190f7ade-f0cc-8d4c-a244-1e0e590d4a9d, uuid:42b8f3b9-3a84-3c42-ae67-a511c7f7c5ea, uuid:182b7202-b30d-5c4e-802f-1ebf64309b72, uuid:b21fbc64-f4f4-3a44-a6e8-79c4c5929335, uuid:a1d6d715-6b69-e24e-b98f-e7f30ecdc057, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BC22B3B020101168A7BA9E5A720EBCD6, xmp.iid:7B9828CD200B1168A7BA9E5A720EBCD6, uuid:9da62181-e3cd-804a-8385-d02b7409cc3a, uuid:de1509ed-bf50-824a-a39e-46a319fcf5c2, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:8387F9AD20111168A7BA9E5A720EBCD6, uuid:d3394917-60bd-ef42-b308-824a04b552e1, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BC22B3B120101168A7BA9E5A720EBCD6, xmp.iid:8387F9AC20111168A7BA9E5A720EBCD6, xmp.iid:F77F11740720681195FED0999783D19D, uuid:29cfc5c0-6423-2a42-bc54-09720c385fff, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:F77F11740720681195FED0999783D19D, uuid:29cfc5c0-6423-2a42-bc54-09720c385fff, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:F77F11740720681195FED0999783D19D, uuid:29cfc5c0-6423-2a42-bc54-09720c385fff, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:75C5781C2015116895FEC5F977633FDF, uuid:612968aa-07d7-c24d-8347-8565496a027c, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:612968aa-07d7-c24d-8347-8565496a027c, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:BC22B3B220101168A7BA9E5A720EBCD6, xmp.iid:BC22B3B920101168A7BA9E5A720EBCD6, uuid:5db3999e-a0f7-a043-89ce-ea9575940bb8, uuid:3a236e05-106a-d943-9c5d-f94d20f7ce18, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:5db3999e-a0f7-a043-89ce-ea9575940bb8, uuid:3a236e05-106a-d943-9c5d-f94d20f7ce18, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:5db3999e-a0f7-a043-89ce-ea9575940bb8, uuid:3a236e05-106a-d943-9c5d-f94d20f7ce18, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, uuid:b1c13646-7f11-6e4f-8958-afd4585aa517, uuid:afde18c6-e9c2-8c4a-bee4-bdd14b63772b, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BC22B3B320101168A7BA9E5A720EBCD6, xmp.iid:103A309520121168A7BA9E5A720EBCD6, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:b1c13646-7f11-6e4f-8958-afd4585aa517, uuid:afde18c6-e9c2-8c4a-bee4-bdd14b63772b, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:b1c13646-7f11-6e4f-8958-afd4585aa517, uuid:afde18c6-e9c2-8c4a-bee4-bdd14b63772b, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:75C5781D2015116895FEC5F977633FDF, uuid:8245bf2f-4dd0-6649-82ae-37f27ba2b4b7, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:103A309720121168A7BA9E5A720EBCD6, xmp.iid:103A309B20121168A7BA9E5A720EBCD6, uuid:4c858ab4-2f66-f24a-b489-80605d313a44, uuid:860e6c47-4965-184f-aecb-8798096d26b8, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:103A309820121168A7BA9E5A720EBCD6, xmp.iid:103A309920121168A7BA9E5A720EBCD6, xmp.iid:103A309A20121168A7BA9E5A720EBCD6, uuid:20e72073-9948-994c-a5bb-c88666b24c13, uuid:6c156fea-7f3e-cf47-a29a-fcbbcf31cb9f, uuid:a0e3dc1d-69db-a14c-b327-ab4af40b6539, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:103A309C20121168A7BA9E5A720EBCD6, xmp.iid:103A309D20121168A7BA9E5A720EBCD6, xmp.iid:103A309E20121168A7BA9E5A720EBCD6, uuid:f58a66c4-6588-7848-aef4-c9ee61079e80, uuid:50ea1c6e-5941-f540-bfaa-7dce79656943, uuid:4c1ae229-6674-c740-83ba-3bf57fe7db20, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:8387F9AB20111168A7BA9E5A720EBCD6, uuid:7329ac6d-122d-a14a-ac87-6e7da3302fd9, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:8387F9B020111168A7BA9E5A720EBCD6, uuid:9424bb1a-47a2-7c4d-9b8c-e7f635471a44, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:8387F9AA20111168A7BA9E5A720EBCD6, uuid:9551a245-77b8-9145-a96a-dd06c2385f9f, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, uuid:9551a245-77b8-9145-a96a-dd06c2385f9f, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:9551a245-77b8-9145-a96a-dd06c2385f9f, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:8387F9A820111168A7BA9E5A720EBCD6, uuid:5eae085d-4602-bd4e-8f1e-f25ab7886226, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:5eae085d-4602-bd4e-8f1e-f25ab7886226, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:8387F9A720111168A7BA9E5A720EBCD6, uuid:71a24489-4bdc-db44-8d06-e1d26e5c2aac, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:8387F9A920111168A7BA9E5A720EBCD6, uuid:5b176369-b19d-a34c-9baf-20054bd4c9eb, xmp.iid:EDC5D4922014116895FEC5F977633FDF, uuid:488e2c19-0153-de46-8879-f573f967140c, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BC22B3B420101168A7BA9E5A720EBCD6, xmp.iid:103A309620121168A7BA9E5A720EBCD6, uuid:ff96940c-439e-7448-aec0-51da048bb141, uuid:da195073-c2e9-7844-a45e-48bce30a68c1, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:8387F9A620111168A7BA9E5A720EBCD6, xmp.iid:BC22B3BA20101168A7BA9E5A720EBCD6, uuid:1977a813-1b25-8245-baa7-eb869bb9c7d0, uuid:1977a813-1b25-8245-baa7-eb869bb9c7d0, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:07801174072068118F628807AB351B33, xmp.iid:8387F9A620111168A7BA9E5A720EBCD6, uuid:1977a813-1b25-8245-baa7-eb869bb9c7d0, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:07801174072068118F628807AB351B33, xmp.iid:F77F11740720681197F6B4950B60A8EB, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:49F490B420081168A7BA9E5A720EBCD6, xmp.iid:49F490B320081168A7BA9E5A720EBCD6, xmp.iid:49F490B220081168A7BA9E5A720EBCD6, xmp.iid:49F490B120081168A7BA9E5A720EBCD6, uuid:d6cf3694-9145-5b40-af94-cb265d15816d, xmp.iid:F77F11740720681197F6B4950B60A8EB, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:EDC5D4942014116895FEC5F977633FDF, xmp.iid:EDC5D4952014116895FEC5F977633FDF, uuid:0b7821fb-0a7d-8742-9195-6ce1ac62397c, uuid:b104383f-6c6d-014d-b159-b44d19f315fd, uuid:c02d6486-c353-e440-9ada-db5fefa334b3, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:0b7821fb-0a7d-8742-9195-6ce1ac62397c, uuid:b104383f-6c6d-014d-b159-b44d19f315fd, uuid:c02d6486-c353-e440-9ada-db5fefa334b3, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:0b7821fb-0a7d-8742-9195-6ce1ac62397c, uuid:b104383f-6c6d-014d-b159-b44d19f315fd, uuid:c02d6486-c353-e440-9ada-db5fefa334b3, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:EDC5D4962014116895FEC5F977633FDF, xmp.iid:EDC5D4972014116895FEC5F977633FDF, uuid:5a64924f-3950-d64e-8bf6-5ebc4012d4d8, uuid:97ae17d3-ef0b-2b42-9ca8-384e41374921, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:c02d6486-c353-e440-9ada-db5fefa334b3, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:5a64924f-3950-d64e-8bf6-5ebc4012d4d8, uuid:97ae17d3-ef0b-2b42-9ca8-384e41374921, uuid:c02d6486-c353-e440-9ada-db5fefa334b3, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:08801174072068118F628807AB351B33, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:5a64924f-3950-d64e-8bf6-5ebc4012d4d8, uuid:97ae17d3-ef0b-2b42-9ca8-384e41374921, uuid:c02d6486-c353-e440-9ada-db5fefa334b3, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:08801174072068118F628807AB351B33, xmp.iid:74117FEA20071168B1A4B6E560E602C3, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:CB9E831720091168A7BA9E5A720EBCD6, xmp.iid:CB9E831620091168A7BA9E5A720EBCD6, xmp.iid:CB9E832020091168A7BA9E5A720EBCD6, xmp.iid:CB9E831920091168A7BA9E5A720EBCD6, xmp.iid:571260D4200A1168A7BA9E5A720EBCD6, xmp.iid:571260DB200A1168A7BA9E5A720EBCD6, xmp.iid:79897E1020161168A7BA9E5A720EBCD6, xmp.iid:75C578252015116895FEC5F977633FDF, xmp.iid:E9820E3F2015116895FEC5F977633FDF, xmp.iid:75C578242015116895FEC5F977633FDF, xmp.iid:79897E1120161168A7BA9E5A720EBCD6, xmp.iid:2C9E353520161168A7BA9E5A720EBCD6, xmp.iid:E9820E3D2015116895FEC5F977633FDF, xmp.iid:74117FEA20071168B1A4B6E560E602C3, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:F8144D3920141168A7BA9E5A720EBCD6, uuid:f837146b-c619-0b49-a4b8-7381a4337968, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:F8144D3820141168A7BA9E5A720EBCD6, xmp.iid:74117FEE20071168A7BAC4618FE18CAD, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:df568aba-e6e9-e041-a9e8-20577dd162d4, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:F8144D3720141168A7BA9E5A720EBCD6, uuid:c42b7dae-5b0e-3f47-951e-57475e832a24, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:74117FEF20071168A7BAC4618FE18CAD, uuid:7061266d-b4b9-c94f-ba12-14aa75a62e0b, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:bfd4b71b-fc74-2445-9db8-b4911dd33327, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:7d1aa191-3b86-f740-89a7-79b602fe5a0d, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:CF57143520181168A7BA9E5A720EBCD6, uuid:f6417ca8-a86d-ce48-a4bf-e04a4240ec9f, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:19c29588-b33d-a045-825e-ad87bd74aa24, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:F8144D3A20141168A7BA9E5A720EBCD6, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:5b232b67-53b2-4048-a36b-b33e7ebf443d, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:01801174072068119457E4A50618C4D8, uuid:2479dba9-f3f1-0041-a2eb-1164d15400b6, uuid:d448288b-5b41-8b43-8e25-59073595473e, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:CF57143420181168A7BA9E5A720EBCD6, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:30a03188-b848-f348-935d-2589e0c25a57, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:21ffd0d0-d7bf-9144-b488-0c457249b8ac, uuid:0cc10bf1-64d9-f34a-8a8d-b5c5f0d4123d, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:02801174072068118F628807AB351B33, xmp.iid:FE7224EB20171168A7BA9E5A720EBCD6, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:cf9825bc-f3e9-ae4b-851f-9d200aa73f7c, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:02801174072068118F628807AB351B33, xmp.iid:04801174072068118F62BCF61010169B, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:79897E1020161168A7BA9E5A720EBCD6, xmp.iid:75C578252015116895FEC5F977633FDF, xmp.iid:E9820E3E2015116895FEC5F977633FDF, xmp.iid:E9820E3C2015116895FEC5F977633FDF, xmp.iid:75C578262015116895FEC5F977633FDF, xmp.iid:571260D5200A1168A7BA9E5A720EBCD6, xmp.iid:04801174072068118F62BCF61010169B, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:CC40F143200F1168A7BA9E5A720EBCD6, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:B3BE7769BB3611DA9552EC53AF0C56D5, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, uuid:3309b1ce-4f40-7b4a-b4eb-b0e6613d5b25, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:480b08c6-35c4-4b07-a0d1-2374700a8c0f, xmp.iid:CC40F140200F1168A7BA9E5A720EBCD6, xmp.iid:C4A32845200E1168A7BA9E5A720EBCD6, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:C4A32844200E1168A7BA9E5A720EBCD6, uuid:c310b501-6602-414e-a6b0-a0dbd8b3ca86, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, uuid:47093826-e878-4248-b4c2-c921a2b1ca02, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:C4A32843200E1168A7BA9E5A720EBCD6, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:47093826-e878-4248-b4c2-c921a2b1ca02, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:C4A32843200E1168A7BA9E5A720EBCD6, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:FA7F1174072068118DBBD1F447C0DE7E, xmp.iid:CF57143320181168A7BA9E5A720EBCD6, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:CC40F144200F1168A7BA9E5A720EBCD6, uuid:55103b53-9c25-5b4f-9ce3-1ea8f65483f7, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:FA7F1174072068118DBBD1F447C0DE7E, xmp.iid:0380117407206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:CB9E831A20091168A7BA9E5A720EBCD6, xmp.iid:571260DA200A1168A7BA9E5A720EBCD6, xmp.iid:CB9E831B20091168A7BA9E5A720EBCD6, xmp.iid:C83DDB1B20291168AFFD827475456367, xmp.iid:0380117407206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:61D4B0C020151168A7BA9E5A720EBCD6, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:ae8faeeb-2871-fc46-9d61-ef836358ae1a, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:FE7224EC20171168A7BA9E5A720EBCD6, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:1bafa39f-73fe-004d-a5c9-a64fcb49dcc5, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:61D4B0C120151168A7BA9E5A720EBCD6, uuid:8dc200a4-5a90-2542-8dec-921e204b5885, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4474163F200F1168B976E710EFB0E67E, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, xmp.iid:FD7F1174072068118DBBB8797007962A, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:1ad5e985-b5dd-e841-a0e8-8928e709c21c, uuid:b2d7a746-0985-c44f-b491-862dc663c2f9, uuid:42bc2c76-d4b7-a447-8f72-450bb6c0524e, uuid:da2f66f6-3eda-b842-9456-117553d16da4, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:97992f5d-8ddb-9245-a197-53353b0bcf03, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:97992f5d-8ddb-9245-a197-53353b0bcf03, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:97992f5d-8ddb-9245-a197-53353b0bcf03, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:01801174072068118F628807AB351B33, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:97992f5d-8ddb-9245-a197-53353b0bcf03, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:01801174072068118F628807AB351B33, xmp.iid:F97F11740720681195FED24F4C4DF30E, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:49F490AF20081168A7BA9E5A720EBCD6, xmp.iid:74117FF520071168A7BAC4618FE18CAD, xmp.iid:FE7224E520171168A7BA9E5A720EBCD6, xmp.iid:74117FF620071168A7BAC4618FE18CAD, xmp.iid:79897E0E20161168A7BA9E5A720EBCD6, xmp.iid:3BDBD4EE200A1168A7BAC4618FE18CAD, xmp.iid:79897E0F20161168A7BA9E5A720EBCD6, xmp.iid:79897E1220161168A7BA9E5A720EBCD6, xmp.iid:74117FF120071168A7BAC4618FE18CAD, xmp.iid:FE7224E820171168A7BA9E5A720EBCD6, xmp.iid:74117FF220071168A7BAC4618FE18CAD, xmp.iid:FE7224E720171168A7BA9E5A720EBCD6, xmp.iid:74117FF320071168A7BAC4618FE18CAD, xmp.iid:3BDBD4EF200A1168A7BAC4618FE18CAD, xmp.iid:74117FF420071168A7BAC4618FE18CAD, xmp.iid:75C578232015116895FEC5F977633FDF, xmp.iid:F97F11740720681195FED24F4C4DF30E, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:3ec42ded-eec1-4946-805b-c66ae1275078, uuid:30045b8c-be35-2541-9344-dfbdc328d9bb, uuid:ad04a085-c185-40d6-bb7e-dbea31ec9c07, uuid:df568aba-e6e9-e041-a9e8-20577dd162d4, uuid:df568aba-e6e9-e041-a9e8-20577dd162d4, uuid:ad04a085-c185-40d6-bb7e-dbea31ec9c07, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, uuid:1cd35420-a9ea-344f-a484-95d441a6659e, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:e3aa017e-acb3-af4c-9fe8-b5adf734c2ae, xmp.iid:0D01D50B2014116895FEC5F977633FDF, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:a50ca1b7-2455-7743-87fb-f9d7ac0bbf21, uuid:3ec42ded-eec1-4946-805b-c66ae1275078, xmp.iid:C827FFDA200D1168A7BA9E5A720EBCD6, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, xmp.iid:4FA32E9C0E206811910994D823FA8765, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:dc6d2fec-d379-f84c-af62-d81191c6b79d, xmp.iid:7B9828D2200B1168A7BA9E5A720EBCD6, uuid:3ec42ded-eec1-4946-805b-c66ae1275078, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:BA342B2120206811A6138825DCF48047, xmp.iid:4FA32E9C0E206811910994D823FA8765, xmp.iid:169338A036206811AB08C9891BB3BC73, uuid:8b43895e-5fa1-0047-bd4d-ae59f9610747, uuid:7d4a0f4a-8556-b647-9596-3a37a8eea2f0, xmp.iid:3BDBD4F0200A1168A7BAC4618FE18CAD, xmp.iid:CC40F146200F1168A7BA9E5A720EBCD6, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7, uuid:06ed0ad1-3e3f-4946-beb0-e75226836af7 Manifest Reference Document ID : xmp.did:F97F117407206811910991F0A45E2630, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:74117FED20071168A7BAC08E29E5C02D, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FED20071168A7BAC08E29E5C02D, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:1F4B0213E8E1DF118915FB81451E9469, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:1F4B0213E8E1DF118915FB81451E9469, xmp.did:6ABE86491A206811A6138825DCF48047, xmp.did:74117FDC200711688BA3F03AF7E679B0, uuid:8D2A59AB5D70DD11954B9AF4C4A634EA, xmp.did:65BE86491A206811A6138825DCF48047, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:0F06A14C17206811AC449920B32F1AFD, xmp.did:7F0A0D454D9DDE11A94FDD45C44D41FE, xmp.did:0F06A14C17206811AC449920B32F1AFD, xmp.did:0F06A14C17206811AC449920B32F1AFD, xmp.did:7F0A0D454D9DDE11A94FDD45C44D41FE, xmp.did:7F0A0D454D9DDE11A94FDD45C44D41FE, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:7F0A0D454D9DDE11A94FDD45C44D41FE, xmp.did:7F0A0D454D9DDE11A94FDD45C44D41FE, xmp.did:7F0A0D454D9DDE11A94FDD45C44D41FE, xmp.did:7F0A0D454D9DDE11A94FDD45C44D41FE, xmp.did:7F0A0D454D9DDE11A94FDD45C44D41FE, xmp.did:7F0A0D454D9DDE11A94FDD45C44D41FE, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:2468c380-0d15-6d4b-bbfc-58a3d3f681c0, uuid:d74d6e3d-f92c-9547-a777-ff8c934980a2, uuid:5271C89252EEDF11AD2AE59502B441BE, uuid:1a5d79b9-3c54-ba44-8142-9388e9af7534, xmp.did:048011740720681195FEF7E1EC5CAEEF, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:01A8EB64200811688012A372FA6FF851, xmp.did:01A8EB60200811688012A372FA6FF851, xmp.did:74117FDF200711688012A372FA6FF851, xmp.did:74117FD9200711688012A372FA6FF851, xmp.did:74117FE0200711688012A372FA6FF851, xmp.did:74117FDC200711688012A372FA6FF851, xmp.did:01A8EB63200811688012A372FA6FF851, xmp.did:74117FE1200711688012A372FA6FF851, xmp.did:74117FDD200711688012A372FA6FF851, xmp.did:74117FE2200711688012A372FA6FF851, xmp.did:01A8EB62200811688012A372FA6FF851, xmp.did:74117FDB200711688012A372FA6FF851, xmp.did:01A8EB65200811688012A372FA6FF851, xmp.did:01A8EB61200811688012A372FA6FF851, xmp.did:74117FDA200711688012A372FA6FF851, xmp.did:74117FDE200711688012A372FA6FF851, xmp.did:0180117407206811B35FE6EC04320B40, uuid:9A8BA3C6FB1511DCB184BB5BC9C4189E, uuid:9A8BA3CEFB1511DCB184BB5BC9C4189E, uuid:30B97163FB1D11DCB184BB5BC9C4189E, uuid:9A8BA3CAFB1511DCB184BB5BC9C4189E, uuid:9A8BA3CCFB1511DCB184BB5BC9C4189E, xmp.did:01A8EB66200811688012A372FA6FF851, xmp.did:01A8EB67200811688012A372FA6FF851, uuid:083ef2d8-9aec-ca4f-ad4c-e643badde057, xmp.did:018011740720681192B0D1C6EC66E5AD, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:01A3846B4CD0DC119891BAF91735E134, uuid:DB6B43500085DE11B721B981A7C4EFE4, uuid:588C6047428811DCBE0E8512A66CE909, uuid:DB6B43500085DE11B721B981A7C4EFE4, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, adobe:docid:photoshop:8fbd6877-9d50-11df-89fa-9b3170bc1e4d, xmp.did:038011740720681195FEF7E1EC5CAEEF, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:74117FED20071168A7BAC08E29E5C02D, xmp.did:05801174072068118DBBF9A121DD829A, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FED20071168A7BAC08E29E5C02D, xmp.did:74117FE620071168AB089BE2B6AE6237, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:3180DC2E99D5DC11B426DFD5B657951C, uuid:4BC53BA55DC6DA119757CAD8DE679204, xmp.did:531AFB00082068118DBBDF4B5DCE6232, xmp.did:561AFB00082068118DBBDF4B5DCE6232, uuid:0B7709652BD0DC119891BAF91735E134, uuid:06A6C1151026DE11A4A6CC4CCA49A716, uuid:DC892F8FAD2ADE118429E4EA20D246D8, xmp.did:018011740720681197A5ABC71C0F97E1, xmp.did:D2EE963820081168B840D798E167943D, uuid:5070181FFB9911DCBC96C1E4E5C63DB7, uuid:3E16C119FB9911DCBC96C1E4E5C63DB7, uuid:DC1E5AC331D3DC118142B63EC55EEA1F, uuid:DE5C17B83AD3DC118142B63EC55EEA1F, uuid:B8E0F693FFCFDC11A092C6C44ED66675, uuid:0C367FFA6A28DE11945EA819576ADC12, uuid:E4FA0C086628DE11945EA819576ADC12, uuid:3CAE7A35992ADE118429E4EA20D246D8, xmp.did:74117FE620071168AB089BE2B6AE6237, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:74117FD920071168BD35CAE3A3520846, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDC20071168B2DACA90694DC002, xmp.did:078011740720681195FEB1EF50D1BA7E, xmp.did:01801174072068119457C52810372C27, xmp.did:74117FDB20071168B2DACA90694DC002, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:F4CEE56C252068119457E5F04AD567BE, xmp.did:F87F117407206811AB08CA44C80299E5, xmp.did:F77F11740720681192B0ABF240E6A6EE, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:01801174072068119109E51115564C40, xmp.did:F4CEE56C252068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:80999105162068118F62CFE02ACACD4E, xmp.did:F77F11740720681192B0ABF240E6A6EE, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:4BC53BA55DC6DA119757CAD8DE679204, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:0980117407206811A7BAEAB28F09F94C, xmp.did:F87F117407206811AB08CA44C80299E5, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:A23E05666ACFDC119F13B157DAF74E75, uuid:4BC53BA55DC6DA119757CAD8DE679204, xmp.did:0980117407206811A7BAEAB28F09F94C, xmp.did:88999105162068118F62CFE02ACACD4E, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:2E1F3D6D1F2068119457E5F04AD567BE, xmp.did:F87F117407206811AB08CA44C80299E5, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:531AFB00082068118DBBDF4B5DCE6232, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:66E39C81E0206811A7BAEAB28F09F94C, xmp.did:561AFB00082068118DBBDF4B5DCE6232, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:0B7709652BD0DC119891BAF91735E134, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:EECEE56C252068119457E5F04AD567BE, xmp.did:F87F117407206811AB08CA44C80299E5, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:06A6C1151026DE11A4A6CC4CCA49A716, xmp.did:68E39C81E0206811A7BAEAB28F09F94C, xmp.did:F5CEE56C252068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:DC892F8FAD2ADE118429E4EA20D246D8, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:1780718FC729DE11B364A37CBC39A93A, uuid:58666501C629DE11B364A37CBC39A93A, uuid:1980718FC729DE11B364A37CBC39A93A, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:DC892F8FAD2ADE118429E4EA20D246D8, uuid:1780718FC729DE11B364A37CBC39A93A, uuid:58666501C629DE11B364A37CBC39A93A, uuid:1980718FC729DE11B364A37CBC39A93A, xmp.did:018011740720681192B0C65825C0EE1D, xmp.did:078011740720681192B0C65825C0EE1D, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:018011740720681197A5ABC71C0F97E1, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:6AE39C81E0206811A7BAEAB28F09F94C, xmp.did:F87F117407206811AB08CA44C80299E5, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:05E235F56FB5DC11BFA6B74AC5B9DC2F, xmp.did:69E39C81E0206811A7BAEAB28F09F94C, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:6AE39C81E0206811A7BAEAB28F09F94C, xmp.did:018011740720681197A5ABC71C0F97E1, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:F87F117407206811AB08CA44C80299E5, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:6AE39C81E0206811A7BAEAB28F09F94C, xmp.did:018011740720681197A5ABC71C0F97E1, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:018011740720681197A5ABC71C0F97E1, xmp.did:F77F117407206811994CA93A48FDF5FB, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:F87F117407206811AB08CA44C80299E5, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:F77F117407206811AB08EBE523749C73, xmp.did:0280117407206811AB08EE51B1F66041, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:74117FED20071168A7BAC08E29E5C02D, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FED20071168A7BAC08E29E5C02D, xmp.did:74117FE620071168AB089BE2B6AE6237, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:607AFD0D02D0DC11A092C6C44ED66675, uuid:80EC38E00ED0DC11A092C6C44ED66675, uuid:697AFD0D02D0DC11A092C6C44ED66675, uuid:AD0BF7502AD0DC119891BAF91735E134, uuid:A94500388EB2DD118613F42ED88356C4, uuid:0C1942FFAFB4DD119329E300F4738FAD, uuid:E59A06F114D0DC119891BAF91735E134, uuid:BAFEBFE3E62CDD1196D1E2BE26E18300, xmp.did:74117FCF20071168B699B89BA84207BD, uuid:C2211AEF03D0DC11A092C6C44ED66675, uuid:B8094F465C23DD119368AFD12A0CC0E2, uuid:4FEA5C6680B2DD11B64AFDED14A05F30, xmp.did:078011740720681197A5ABC71C0F97E1, uuid:057709652BD0DC119891BAF91735E134, uuid:90AD1E52CB3BDD119F5AED01ACBAE86C, xmp.did:F77F117407206811994CEA67371F3CE9, uuid:F967A14B5E23DD119368AFD12A0CC0E2, uuid:1C25128079CFDC1186EE9BDAF068EAF4, uuid:070AC50C28D0DC119891BAF91735E134, uuid:197469207823DD119368AFD12A0CC0E2, uuid:039A89BE8E23DD119368AFD12A0CC0E2, uuid:3B5806B62BD0DC119891BAF91735E134, uuid:AAB9EFE13ED0DC119891BAF91735E134, uuid:D119F07F5BCFDC119F13B157DAF74E75, uuid:5E1C9F7C8623DD119368AFD12A0CC0E2, uuid:B3B9EFE13ED0DC119891BAF91735E134, uuid:3C0C9E892AD0DC119891BAF91735E134, uuid:08A3846B4CD0DC119891BAF91735E134, xmp.did:74117FE620071168AB089BE2B6AE6237, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:F87F117407206811AB08CA44C80299E5, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:80EC38E00ED0DC11A092C6C44ED66675, uuid:607AFD0D02D0DC11A092C6C44ED66675, xmp.did:6BE39C81E0206811A7BAEAB28F09F94C, xmp.did:028011740720681195FED5213F2033DD, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:AD0BF7502AD0DC119891BAF91735E134, xmp.did:0880117407206811AB08DC833C2041AF, xmp.did:048011740720681195FED5213F2033DD, xmp.did:018011740720681192B0E9AC80E456A1, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:A94500388EB2DD118613F42ED88356C4, uuid:2ACD052312D0DC11A092C6C44ED66675, xmp.did:0980117407206811AB08DC833C2041AF, xmp.did:03801174072068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:0C1942FFAFB4DD119329E300F4738FAD, uuid:03EAE0C12AD0DC119891BAF91735E134, xmp.did:0A80117407206811AB08DC833C2041AF, xmp.did:04801174072068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:BAFEBFE3E62CDD1196D1E2BE26E18300, uuid:E59A06F114D0DC119891BAF91735E134, xmp.did:06801174072068119457E5F04AD567BE, xmp.did:07801174072068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:0280117407206811AB08DC833C2041AF, xmp.did:0380117407206811AB08DC833C2041AF, xmp.did:0480117407206811AB08DC833C2041AF, xmp.did:0580117407206811AB08DC833C2041AF, xmp.did:0680117407206811AB08DC833C2041AF, xmp.did:0780117407206811AB08DC833C2041AF, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:0280117407206811AB08DC833C2041AF, xmp.did:0380117407206811AB08DC833C2041AF, xmp.did:0480117407206811AB08DC833C2041AF, xmp.did:0580117407206811AB08DC833C2041AF, xmp.did:0680117407206811AB08DC833C2041AF, xmp.did:0780117407206811AB08DC833C2041AF, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:0280117407206811AB08DC833C2041AF, xmp.did:0380117407206811AB08DC833C2041AF, xmp.did:0480117407206811AB08DC833C2041AF, xmp.did:0580117407206811AB08DC833C2041AF, xmp.did:0680117407206811AB08DC833C2041AF, xmp.did:0780117407206811AB08DC833C2041AF, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:C2211AEF03D0DC11A092C6C44ED66675, xmp.did:ADEF5A580E2068119109E51115564C40, xmp.did:3ED641EA2B206811AB08DC833C2041AF, xmp.did:3FD641EA2B206811AB08DC833C2041AF, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:B8094F465C23DD119368AFD12A0CC0E2, xmp.did:08801174072068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:4FEA5C6680B2DD11B64AFDED14A05F30, uuid:29D831B02BD0DC119891BAF91735E134, xmp.did:F77F11740720681195FED0999783D19D, xmp.did:40D641EA2B206811AB08DC833C2041AF, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:F77F11740720681195FED0999783D19D, xmp.did:40D641EA2B206811AB08DC833C2041AF, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:F77F11740720681195FED0999783D19D, xmp.did:40D641EA2B206811AB08DC833C2041AF, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:078011740720681197A5ABC71C0F97E1, xmp.did:0A801174072068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:0A801174072068119457E5F04AD567BE, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:057709652BD0DC119891BAF91735E134, uuid:8F18C248BAD8DC119973909D2F1EFCC3, xmp.did:41D641EA2B206811AB08DC833C2041AF, xmp.did:42D641EA2B206811AB08DC833C2041AF, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:41D641EA2B206811AB08DC833C2041AF, xmp.did:42D641EA2B206811AB08DC833C2041AF, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:41D641EA2B206811AB08DC833C2041AF, xmp.did:42D641EA2B206811AB08DC833C2041AF, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:44D641EA2B206811AB08DC833C2041AF, xmp.did:43D641EA2B206811AB08DC833C2041AF, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:90AD1E52CB3BDD119F5AED01ACBAE86C, uuid:AB40858018D0DC119891BAF91735E134, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:44D641EA2B206811AB08DC833C2041AF, xmp.did:43D641EA2B206811AB08DC833C2041AF, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:44D641EA2B206811AB08DC833C2041AF, xmp.did:43D641EA2B206811AB08DC833C2041AF, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:F77F117407206811994CEA67371F3CE9, xmp.did:592F1DE8102068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:1C25128079CFDC1186EE9BDAF068EAF4, uuid:F967A14B5E23DD119368AFD12A0CC0E2, xmp.did:5E2F1DE8102068119457E5F04AD567BE, xmp.did:5A2F1DE8102068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:070AC50C28D0DC119891BAF91735E134, uuid:040AC50C28D0DC119891BAF91735E134, uuid:0A0AC50C28D0DC119891BAF91735E134, xmp.did:5B2F1DE8102068119457E5F04AD567BE, xmp.did:5C2F1DE8102068119457E5F04AD567BE, xmp.did:5D2F1DE8102068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:B6FEBFE3E62CDD1196D1E2BE26E18300, uuid:197469207823DD119368AFD12A0CC0E2, uuid:B6FEBFE3E62CDD1196D1E2BE26E18300, xmp.did:9AF497C5162068119457E5F04AD567BE, xmp.did:9CF497C5162068119457E5F04AD567BE, xmp.did:9BF497C5162068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:039A89BE8E23DD119368AFD12A0CC0E2, xmp.did:542F1DE8102068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:3B5806B62BD0DC119891BAF91735E134, xmp.did:05801174072068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:AAB9EFE13ED0DC119891BAF91735E134, xmp.did:552F1DE8102068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:552F1DE8102068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:552F1DE8102068119457E5F04AD567BE, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:D119F07F5BCFDC119F13B157DAF74E75, xmp.did:562F1DE8102068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:562F1DE8102068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:5E1C9F7C8623DD119368AFD12A0CC0E2, xmp.did:572F1DE8102068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:B3B9EFE13ED0DC119891BAF91735E134, xmp.did:09801174072068119457E5F04AD567BE, xmp.did:A23707EA0C20681197A5C6900E1322DC, xmp.did:0780117407206811B35FE6EC04320B40, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:3C0C9E892AD0DC119891BAF91735E134, uuid:141D3BC4AF22DD11B0DA86C968157F14, xmp.did:01801174072068119457E5F04AD567BE, xmp.did:02801174072068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:08A3846B4CD0DC119891BAF91735E134, uuid:2238B574C7D0DC11A27CEDC2FA192C2F, xmp.did:582F1DE8102068119457E5F04AD567BE, xmp.did:582F1DE8102068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:74117FED20071168A7BAC08E29E5C02D, uuid:08A3846B4CD0DC119891BAF91735E134, xmp.did:582F1DE8102068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FED20071168A7BAC08E29E5C02D, xmp.did:74117FE620071168AB089BE2B6AE6237, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:784B5159142068119109AB72A88C7D06, xmp.did:018011740720681192B0F8886124E5C8, xmp.did:FF7F1174072068119109AB72A88C7D06, xmp.did:7F4B5159142068119109AB72A88C7D06, xmp.did:F87F117407206811AB08CA44C80299E5, xmp.did:74117FE620071168AB089BE2B6AE6237, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:018011740720681192B0F8886124E5C8, xmp.did:784B5159142068119109AB72A88C7D06, xmp.did:F1CEE56C252068119457E5F04AD567BE, xmp.did:F2CEE56C252068119457E5F04AD567BE, xmp.did:F3CEE56C252068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:F1CEE56C252068119457E5F04AD567BE, xmp.did:F2CEE56C252068119457E5F04AD567BE, xmp.did:F3CEE56C252068119457E5F04AD567BE, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:F1CEE56C252068119457E5F04AD567BE, xmp.did:F2CEE56C252068119457E5F04AD567BE, xmp.did:F3CEE56C252068119457E5F04AD567BE, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:7F4B5159142068119109AB72A88C7D06, xmp.did:FF7F1174072068119109AB72A88C7D06, xmp.did:EFCEE56C252068119457E5F04AD567BE, xmp.did:F0CEE56C252068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:F3CEE56C252068119457E5F04AD567BE, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:EFCEE56C252068119457E5F04AD567BE, xmp.did:F0CEE56C252068119457E5F04AD567BE, xmp.did:F3CEE56C252068119457E5F04AD567BE, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:74117FED20071168A7BAC08E29E5C02D, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:EFCEE56C252068119457E5F04AD567BE, xmp.did:F0CEE56C252068119457E5F04AD567BE, xmp.did:F3CEE56C252068119457E5F04AD567BE, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FED20071168A7BAC08E29E5C02D, xmp.did:74117FE620071168AB089BE2B6AE6237, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:B7BA02A22BD0DC119891BAF91735E134, uuid:FDD55D1BCCD0DC11A27CEDC2FA192C2F, uuid:646F3D9CA1A3DE118B2AB51D9FA88559, uuid:D661C1864AD0DC119891BAF91735E134, uuid:CE643121E2D0DC11A27CEDC2FA192C2F, uuid:311AEAD8F64411DC9C35A752F320B6C6, uuid:8D7F414A68F0DC11B6B4F7D666A497D2, uuid:9C6F9FC248F0DC11B6B4F7D666A497D2, uuid:D7D2704453F0DC11B6B4F7D666A497D2, uuid:109F28C11EF1DC118E8EB9EC55B1CBF6, uuid:C830CA0CFB9711DCBC96C1E4E5C63DB7, xmp.did:4A5F3B3C20201168B69992B5073C5DBB, xmp.did:574C8ED3200D1168BB8EE609A3EF8592, xmp.did:74117FE620071168AB089BE2B6AE6237, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:B7BA02A22BD0DC119891BAF91735E134, xmp.did:F8CEE56C252068119457E5F04AD567BE, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:FDD55D1BCCD0DC11A27CEDC2FA192C2F, xmp.did:01801174072068119109A2230F897F55, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:083ef2d8-9aec-ca4f-ad4c-e643badde057, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:FDD55D1BCCD0DC11A27CEDC2FA192C2F, xmp.did:F6CEE56C252068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:01801174072068119109A2230F897F55, xmp.did:F7CEE56C252068119457E5F04AD567BE, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:FE7F11740720681195FED0999783D19D, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:311AEAD0F64411DC9C35A752F320B6C6, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:646F3D9CA1A3DE118B2AB51D9FA88559, uuid:2783bfb2-0f76-469e-b8d1-f1dcd4bbf64e, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:0480117407206811B35FE6EC04320B40, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:D661C1864AD0DC119891BAF91735E134, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:2069C9344E2068119457E5F04AD567BE, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:01801174072068119457E4A50618C4D8, xmp.did:02801174072068119457E4A50618C4D8, xmp.did:2169C9344E2068119457E5F04AD567BE, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:CE643121E2D0DC11A27CEDC2FA192C2F, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:0280117407206811B35FE6EC04320B40, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:9FF497C5162068119457E5F04AD567BE, xmp.did:149338A036206811AB08C9891BB3BC73, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:74117FED20071168A7BAC08E29E5C02D, uuid:311AEAD8F64411DC9C35A752F320B6C6, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:FA7F117407206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FED20071168A7BAC08E29E5C02D, xmp.did:74117FE620071168AB089BE2B6AE6237, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:8D7F414A68F0DC11B6B4F7D666A497D2, uuid:9C6F9FC248F0DC11B6B4F7D666A497D2, uuid:D7D2704453F0DC11B6B4F7D666A497D2, uuid:109F28C11EF1DC118E8EB9EC55B1CBF6, xmp.did:374231301020681192B0927B7A46E053, uuid:A57C6FCF6B32DD119172F27FBB9B1AF5, xmp.did:74117FE620071168AB089BE2B6AE6237, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:263D4F4F370FDE11A72781617A40C0D2, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:02DC7A14BA6511DA890ED4FFB63B7771, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:F97F117407206811AB08C9891BB3BC73, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:952273194A98DC118700F6E2B1A1C950, uuid:8D7F414A68F0DC11B6B4F7D666A497D2, uuid:9C6F9FC248F0DC11B6B4F7D666A497D2, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:D7D2704453F0DC11B6B4F7D666A497D2, xmp.did:F87F117407206811AB08C9891BB3BC73, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:F77F117407206811AB08C9891BB3BC73, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:109F28C11EF1DC118E8EB9EC55B1CBF6, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:F77F117407206811AB08C9891BB3BC73, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:109F28C11EF1DC118E8EB9EC55B1CBF6, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:74117FED20071168A7BAC08E29E5C02D, uuid:A57C6FCF6B32DD119172F27FBB9B1AF5, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:374231301020681192B0927B7A46E053, uuid:40D1707609FADD118A58D9839AAA3A1D, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FED20071168A7BAC08E29E5C02D, xmp.did:74117FE620071168AB089BE2B6AE6237, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:A042F1112AD0DC119891BAF91735E134, uuid:B2374B88DFD0DC11A27CEDC2FA192C2F, uuid:2B41F9F9D2D0DC11A27CEDC2FA192C2F, xmp.did:0180117407206811A613C40C8D0A797A, xmp.did:74117FE620071168AB089BE2B6AE6237, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:A042F1112AD0DC119891BAF91735E134, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:CAED339D14206811AB08C9891BB3BC73, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, uuid:B2374B88DFD0DC11A27CEDC2FA192C2F, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:CCED339D14206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:2B41F9F9D2D0DC11A27CEDC2FA192C2F, xmp.did:CBED339D14206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:0180117407206811A613C40C8D0A797A, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:74117FDB20071168B9E78957EE43B6AB, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:0aa2a1a9-11ba-4d10-bab5-fcb14087d6aa, uuid:6b467a36-717f-434c-8be9-3b2c62d8f3b6, uuid:070851b1-80f4-49b3-a80b-0bc8b2a1e6e0, uuid:e6cd1451-331e-43fd-8237-40ebf07dfbb1, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:429c86c6-225d-47f3-b294-316c5916ddc2, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:429c86c6-225d-47f3-b294-316c5916ddc2, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:429c86c6-225d-47f3-b294-316c5916ddc2, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:74117FED20071168A7BAC08E29E5C02D, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:429c86c6-225d-47f3-b294-316c5916ddc2, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FED20071168A7BAC08E29E5C02D, xmp.did:74117FE620071168AB089BE2B6AE6237, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:D2EE963820081168B840D798E167943D, uuid:9D5D691AC83BDD119F5AED01ACBAE86C, uuid:5070181FFB9911DCBC96C1E4E5C63DB7, uuid:EB104D9EFB9811DCBC96C1E4E5C63DB7, uuid:3E16C119FB9911DCBC96C1E4E5C63DB7, uuid:EB104DA4FB9811DCBC96C1E4E5C63DB7, uuid:18A2AFE2FD8711DCA19FF12D137C8D13, uuid:C830CA0CFB9711DCBC96C1E4E5C63DB7, uuid:2A130B33FB9911DCBC96C1E4E5C63DB7, uuid:A979AAF82AD3DC118142B63EC55EEA1F, uuid:1573CE10FB9911DCBC96C1E4E5C63DB7, uuid:A279AAF82AD3DC118142B63EC55EEA1F, uuid:CC67B0E9FB9811DCBC96C1E4E5C63DB7, uuid:F64938B1FB9811DCBC96C1E4E5C63DB7, uuid:F64938B7FB9811DCBC96C1E4E5C63DB7, adobe:docid:photoshop:db32617a-dca5-11d8-a188-f2e676d0843e, xmp.did:74117FE620071168AB089BE2B6AE6237, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:D621AE92FB6211DCB184BB5BC9C4189E, uuid:DE8B9C54FB4311DCB184BB5BC9C4189E, uuid:DE8B9C50FB4311DCB184BB5BC9C4189E, uuid:083ef2d8-9aec-ca4f-ad4c-e643badde057, uuid:083ef2d8-9aec-ca4f-ad4c-e643badde057, uuid:DE8B9C50FB4311DCB184BB5BC9C4189E, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:018011740720681197A5E21E6DE60CD0, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:F77F117407206811945795D48869D91A, xmp.did:D2EE963820081168B840D798E167943D, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:D621AE96FB6211DCB184BB5BC9C4189E, uuid:D621AE92FB6211DCB184BB5BC9C4189E, uuid:5070181FFB9911DCBC96C1E4E5C63DB7, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:018011740720681195FE90E1D6D82CE7, uuid:D621AE9AFB6211DCB184BB5BC9C4189E, uuid:3E16C119FB9911DCBC96C1E4E5C63DB7, uuid:D621AE92FB6211DCB184BB5BC9C4189E, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:74117FDB20071168AC27920D9BEF982C, uuid:9F1C77127F11DD11AA6CE40042A85698, xmp.did:169338A036206811AB08C9891BB3BC73, uuid:C02063EDFB9711DCB184BB5BC9C4189E, uuid:956AC75EFB9811DCB184BB5BC9C4189E, uuid:2A130B33FB9911DCBC96C1E4E5C63DB7, uuid:18A2AFE2FD8711DCA19FF12D137C8D13, xmp.did:018011740720681195FE90E1D6D82CE7, xmp.did:018011740720681195FE90E1D6D82CE7 Doc Change Count : 132196 Format : application/pdf Producer : Adobe PDF Library 9.0 Trapped : False Page Count : 244EXIF Metadata provided by EXIF.tools