AT Commands Set SIM7500 SIM7600 Series Command Manual V1.10
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 335
| Download | |
| Open PDF In Browser | View PDF |
SIM7500_SIM7600 Command Manual _V1.10 Series_AT Smart Machine Smart Decision Document Title: SIM7500_SIM7600 Series_AT Command Manual Version: 1.10 Date: 2018-10-08 Status: Release Document ID: SIM7500_SIM7600 Series_AT Command Manual_V1.10 General Notes SIMCom offers this information as a service to its customers, to support application and engineering efforts that use the products designed by SIMCom. The information provided is based upon requirements specifically provided to SIMCom by the customers. SIMCom has not undertaken any independent search for additional relevant information, including any information that may be in the customer’s possession. Furthermore, system validation of this product designed by SIMCom within a larger electronic system remains the responsibility of the customer or the customer’s system integrator. All specifications supplied herein are subject to change. Copyright This document contains proprietary technical information which is the property of SIMCom Limited., copying of this document and giving it to others and the using or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights reserved in the event of grant of a patent or the registration of a utility model or design. All specification supplied herein are subject to change without notice at any time. Copyright © Shanghai SIMCom Wireless Solutions Ltd. 2018 SIM7500_SIM7600 Series_AT Command Manual_V1.10 1 2018-10-08 Smart Machine Smart Decision Version History Version Date Chapter What is new V1.00 2016-07-08 V1.01 2016-07-21 5.5 AT+CCUG Add note. V1.01 2016-07-21 5.6 AT+CUSD Add note. V1.01 2016-07-21 5.7 AT+CAOC Add note. V1.01 2016-07-21 5.8 AT+CSSN Add note. V1.01 2016-07-21 11.2 AT+STGI Add PDU format support V1.01 2016-07-21 11.3 AT+STGR Add PDU format support V1.01 2016-07-21 11.6 AT+STENV Add this command V1.01 2016-07-21 11.7 AT+STSM Add this command V1.02 2016-07-27 11.7 AT+STSM Modify this command V1.02 2016-07-27 5.13 AT+CNAOP Modify this command V1.02 2016-07-27 5.18 AT+CTZU Modify this command V1.02 2016-07-27 5.19 AT+CTZR Modify this command V1.02 2016-07-27 5.16 AT+CPSI Modify this command V1.02 2016-07-27 9.15 AT+CGAUTH Modify this command V1.02 2016-07-27 Chapter 15 Delete the CSOCK* Command V1.02 2016-07-27 3.21 AT&F Modify this command V1.02 2016-07-28 6.25 AT+CACDBFN Modify this command V1.02 2016-07-29 5.18 AT+CTZU Modify this command V1.02 2016-07-29 5.18 AT+CTZR Modify this command V1.02 2016-07-29 6.24 AT+SIDET Modify this command V1.02 2016-07-29 5.20 AT+NETMODE Modify this command,PIN->NO V1.02 2016-07-29 12.5 AT+CGFUNC Modify this command V1.02 2016-07-29 12.6 AT+CGDRT Modify this command V.1.02 2016-07-29 12.7 AT+CGGRTV Modify this command V.1.02 2016-07-29 12.8 AT+CGSETV Modify this command V1.02 2016-07-29 5.15 AT+CPSI Modify this command V1.02 2016-07-29 11.2 AT+STGI Modify this command V1.02 2016-07-29 11.7 AT+STSM Modify this command V1.02 2016-07-29 Delete CSD function V1.02 2016-08-05 11.5 New version AT+STKFMT SIM7500_SIM7600 Series_AT Command Manual_V1.10 Delete CSD function Set STK pdu Modify this command 2 2018-10-08 Smart Machine Smart Decision format V1.02 2016-08-05 5.15 AT+CPSI system information Inquiring UE Modify 1xlte V1.02 2016-08-05 9.11 AT+CGDATA Enter data state Modify cid V1.02 2016-08-05 9.3 AT+CGACT PDP activate or deactivate V1.02 2016-08-05 7.9 AT+CNMI indications to TE V1.02 2016-08-12 7.25 AT+CMGP Set cdma/evdo Modify format text mode parameters V1.02 2016-08-16 15.7 Common Channel Service Modify these commands 15.8 SSL Certificate & Key management V1.02 2016-08-16 6.29 6.30 V1.02 2016-08-17 11.7 AT+STSM Get STK Setup Modify this command Menu List with PDU Mode V1.02 2016-08-17 5.14 AT+CNSDP Preferred service Delete this command domain selection V1.02 2016-08-19 AT+CMGENREF AT+CMSSEXM AT+CSALPHA Delete this command V1.02 2016-08-26 15.1.6 Modify this command V1.02 2016-08-30 5.19 AT+NETMODE Modify this command V1.02 2016-09-05 3.21 AT&F Modify this command V1.02 2016-09-05 10.6 AT+CMTE Modify test command V1.02 2016-09-05 15.7.3 15.7.7 15.7.8 V1.02 2016-09-05 15.7.10 Unsolicited common Add error code description channel commandCodes V1.02 2016-09-06 6.27 6.28 6.29 6.30 AT+CMICGAIN AT+COUTGAIN AT+CTXVOL AT+CTXMICGAIN Modify these commands V1.02 2016-09-06 6.31 6.32 6.33 6.34 AT+CRXVOL AT+CECH AT+CECDT AT+CECWB Add these commands New context Modify cid message Modify default value AT+CTXVOL AT+CTXMICGAIN Add commands AT+CPINGSTOP AT+CCHOPEN AT+CCHSET AT+CCHADDR SIM7500_SIM7600 Series_AT Command Manual_V1.10 Modify these commands 3 2018-10-08 Smart Machine Smart Decision 6.35 6.36 6.37 6.38 6.39 AT+CNSN AT+CNSLIM AT+CFNSMOD AT+CFNSIN AT+CFNSLVL V1.02 2016-09-06 12.6 12.7 12.8 12.9 AT+CGDRT AT+CGSETV AT+CGGETV AT+CGISR Modify these commands V1.02 2016-09-07 9.15 AT+CGAUTH Modify read command and test command V1.02 2016-09-09 5.11 AT+CNMP Modify this command V1.02 2016-09-09 3.21 AT&F Modify this command V1.02 2016-09-09 11.5 AT+STKFMT Modify this command V1.02 2016-09-13 6.24 AT+SIDET Modify this command V1.02 2016-09-13 4.23 AT+CUSBPIDSWITCH Add this command V1.02 2016-09-14 6.22 AT+CSDVC Modify this command V1.02 2016-09-18 6.40 6.41 6.42 AT+CECRX AT+CNLPPG AT+CNLPPL Add these commands V1.02 2016-09-19 7.2 V1.02 2016-09-21 10.6 AT+CMTE Modify this command V1.02 2016-09-21 10.9 AT+CUSBDELETEADB Delete this command V1.02 2016-09-22 6.43 AT+CECM Add this command V1.02 2016-09-22 15.7.6 V1.02 2016-09-22 15.7.10 Unsolicited common Modify the format channel command Codes V1.02 2016-09-26 6.25 V1.02 2016-09-27 15.2.10 V1.02 2016-09-28 3.33 AT+CIMI Modify this command V1.02 2016-09-28 3.34 AT+CIMIM Add this command V1.02 2016-09-28 7.13 7.15 7.20 AT+CMGS AT+CMGW AT+CMGSEX Modify these commands V1.02 2016-10-08 3.21 AT&F Modify this command V1.02 2016-10-12 9.6 AT+CGTFT Modify this command V1.02 2016-10-13 9.4 AT+CGDCONT Modify this command AT+CPMS Modify this command AT+CCHRECV Modify this command AT+CACDBFN Modify this command AT+CIPFILTERSET SIM7500_SIM7600 Series_AT Command Manual_V1.10 Modify this command 4 2018-10-08 Smart Machine Smart Decision V1.02 2016-10-13 16.8 AT+CGPSNMEA Modify this command V1.02 2016-10-17 9.3 AT+CGACT 9.7 AT+CGQREQ 9.8 AT+CGEQREQ 9.9 AT+CGQMIN 9.10 AT+CGEQMIN 9.11 AT+CGDATA 9.12 AT+CGPADDR 9.15 AT+CGAUTH 15.1.12 AT+CDNSSRV Modify these commands V1.02 2016-10-18 7.2 Modify this command V1.02 2016-10-19 3.21 V1.02 2016-10-20 9.8 AT+CGEQREQ 9.10 AT+CGEQMIN Modify these commands V1.02 2016-10-20 12.9 AT+CGISR Modify this command V1.02 2016-10-24 5.13 AT+CNAOP Modify this command V1.02 2016-10-24 3.21 AT&F Modify this command V1.02 2016-10-28 16.20 V1.02 2016-11-09 11.4 AT+STK Modify this command V1.02 2016-11-04 6.22 AT+CSDVC Modify this command V1.02 2016-11-04 16.21 AT+CBDS V1.02 2016-11-04 15.3.9 AT+CFTPGET 15.3.11 AT+CFTPLIST Modify these commands V1.02 2016-11-04 15.3.15 Add this command V1.02 2016-11-08 4.23 AT+CUSBPIDSWITCH Modify this command V1.02 2016-11-10 3.21 AT&F Modify this command V1.02 2016-11-10 9.3 AT+CGACT 9.11 AT+CGDATA Modify these commands V1.02 2016-11-10 15.1.1 AT+CSOCKSETPN Modify this command V1.03 2016-11-11 4.23 AT+CUSBPIDSWITCH Modify this command V1.03 2016-11-17 16.21 AT+CBDS Modify this command V1.03 2016-11-17 16.15 AT+CGPSINFOCFG Modify this command V1.03 2016-11-24 15.3.9 AT+CFTPGET 15.3.11 AT+CFTPLIST 15.3.15 AT+CFTPCACHERD Modify these commands V1.03 2016-11-24 15.7.3 15.7.6 Modify these commands AT+CPMS AT&F Modify this command AT+CGPSMODE Add this command Add this command AT+CFTPCACHERD AT+CCHOPEN AT+CCHRECV SIM7500_SIM7600 Series_AT Command Manual_V1.10 5 2018-10-08 Smart Machine Smart Decision V1.03 2016-12-12 9.3 AT+CGACT Modify this command V1.03 2016-12-21 9.4 AT+CGDCONT Modify this command V1.03 2016-12-23 3.21 AT&F 5.11 AT+CNBP 5.14 AT+CPSI Modify these commands V1.03 2017-1-4 9.12 Modify this command V1.03 2017-1-11 16.10 V1.03 2017-1-12 5.14 V1.04 2017-1-20 15.7.6 V1.04 2017-2-9 6.26 6.43 V1.04 2017-2-9 15.7.6 V1.04 2017-2-20 5.12 AT+CNBP Modify this command V1.04 2017-2-21 3.12 12.1 AT+IPR AT+IPREX Modify these commands V1.04 2017-3-8 3.21 AT&F Modify this command V1.04 2017-3-28 17.24 V1.04 2017-4-13 17.9 AT+CGPSNEMARATE Add this command V1.04 2017-4-14 15.5 HTTPS Add this chapter V1.04 2017-4-19 17.25 V1.04 2017-5-4 4.23 V1.04 2017-5-11 17.26 V1.04 2017-5-17 16 AT Commands for Open/Close Add this chapter Network V1.04 2017-5-24 18 V1.04 2017-5-25 15.7 SMTP Delete this chapter V1.04 2017-5-25 15.4 FTPS Add this chapter V1.05 2017-6-19 15.6 HTTPS Modify HTTPS commands V1.05 2017-7-3 16.4 Unsolicited CNETSTOP Codes V1.05 2017-7-3 17.24 17.25 AT+CLBS AT+CLBSCFG V1.05 2017-7-10 14.2 AT+CFTRANTX V1.05 2017-7-10 13 V1.05 2017-7-11 6.44 V1.05 2017-7-14 15.8.9 AT+CGPADDR AT+CGPSFTM Modify this command AT+CPSI Modify this command AT+CCHRECV Modify this command AT+CPCMREG AT+CECM Modify these commands AT+CCHRECV Modify this command AT+CLBS Add this command AT+CLBSCFG Add this command AT+CUSBPIDSWITCH Modify this command AT+CASSISTLOC Add this command Audio Application Commands Add this chapter CNETSTART/ Add this command Modify these commands Modify this command AT Commands for File System Modify the description AT+CPCMFRM Add this command AT+CCERTVERIFY SIM7500_SIM7600 Series_AT Command Manual_V1.10 Add this command 6 2018-10-08 Smart Machine Smart Decision V1.05 2017-8-25 7.12 AT+CMGR Modify this command V1.05 2017-9-5 5.15 AT+CNSMOD Modify this command V1.05 2017-9-5 5.14 AT+CPSI Modify this command V1.06 2017-10-13 1.1 V1.06 2017-10-13 17.24 AT+CLBS Modify this command V1.07 2017-10-16 15.3.2 AT+CFTPMODE Modify this command V1.07 2017-10-16 15.6.4 AT+CHTTPSCLSE Modify this command V1.07 2017-11-3 7.9 V1.07 2017-11-7 12.2 AT+CFGRI Modify this command V1.07 2017-11-13 17.25 AT+CLBS Modify this command V1.07 2017-11-13 15.8 V1.07 2017-11-13 17.23 V1.07 2017-12-14 4.23 V1.07 2017-12-15 17.25 V1.08 2017-12-18 17.8 V1.08 2017-12-18 17.24 AT+CGNSSMODE Add this command V1.08 2018-1-10 17.26 AT+CLBS Modify this command V1.08 2018-1-24 17.21 AT+CGPSMODE Delete this command V1.08 2018-1-24 17.22 AT+CBDS Delete this command V1.08 2018-1-24 15.8.2 Unsolicited NTP Codes Delete this command V1.08 2018-2-8 15.10.1 AT+CCERTDOWN Modify this command V1.08 2018-2-9 15.8.1 V1.08 2018-2-28 13 V1.08 2018-3-2 15.10.1 15.10.2 15.10.3 V1.08 2018-3-13 15.6.5 AT+CHTTPSSEND Modify this command V1.08 2018-3-20 15.5.1 AT+CHTTPACT Modify this command V1.08 2018-3-28 15.6.9 Unsolicited HTTPS command Modify this command Codes V1.08 2018-4-2 17.8 V1.08 2018-4-2 17.22 AT+CGNSSMODE Modify this command V1.08 2018-4-2 15.6.5 AT+CHTTPSSEND Modify this command V1.09 2018-4-17 6.45 Scope Modify scope AT+CNMI Modify this command NTP Add this chapter AT+CGNSSINFO Add this command AT+CUSBPIDSWITCH Modify this command AT+CLBS Modify this command AT+CGPSNMEA Modify this command AT+CNTP Modify this command AT Commands for File System Modify this chapter AT+CCERTDOWN AT+CCERTLIST AT+CCERTDELE Modify these commands AT+CGPSNMEA Modify this command AT+CPTONE SIM7500_SIM7600 Series_AT Command Manual_V1.10 Add this command 7 2018-10-08 Smart Machine Smart Decision V1.09 2018-4-18 15.3.16 AT+CFTPSINGLEIP Add this command V1.09 2018-5-2 17.24 AT+CLBS Modify this command V1.09 2018-5-3 15.2.1 AT+CIPCCFG Modify this command V1.09 2018-5-4 17.25 AT+CLBSCFG Modify this command V1.09 2018-5-7 15.6.5 15.6.5 AT+CHTTPSSEND AT+CHTTPSRECV Modify these commands V1.09 2018-5-9 15.10.2 AT+CCERTLIST V1.09 2018-5-21 15.8.1 V1.09 2018-5-31 4.23 AT+CUSBPIDSWITCH Modify this command V1.09 2018-6-5 4.23 AT+CUSBPIDSWITCH Modify this command V1.09 2018-7-10 15.2.10 V1.09 2018-7-11 15.8.1 V1.09 2018-7-25 15.9 Common Channel Service Add mbedtls 15.10 SSL Certificate & Key Management V1.09 2018-8-3 15.6.5 15.6.6 AT+CHTTPSSEND AT+CHTTPSRECV Modify these commands V1.09 2018-8-3 15.9.9 AT+CCHMODE Add this command V1.10 2018-8-16 4.23 AT+CUSBPIDSWITCH Modify this command V1.10 2018-8-22 18.3 18.5 AT+CCMXSTOPWAV AT+CCMXSTOP Modify these commands V1.10 2018-8-24 15.9 Common Channel Service Delete these chapters 15.10 SSL Certificate & Key Management V1.10 2018-9-11 17.25 17.26 V1.10 2018-9-12 15.2 15.3 15.4 15.5 15.6 V1.10 2018-9-17 17.11 AT+CGPSFTM 17.13 AT+CGPSXE 17.16 AT+CGPSINFOCFG Modify this command AT+CNTP Modify this command AT+CIPFILTERSET Delete this command AT+CNTP Modify this command AT+CLBSCFG AT+CASSISTLOC Modify these commands TCP/UDP FTP FTPS HTTP HTTPS SIM7500_SIM7600 Series_AT Command Manual_V1.10 Delete these chapters Modify these commands 8 2018-10-08 Smart Machine Smart Decision Contents V e r s i o n H i s t o r y ........................................................................................................................... 2 C o n t e n t s ............................................................................................................................................ 9 1 Introduction.................................................................................................................................... 16 2 3 1.1 Scope .................................................................................................................................................... 16 1.2 References ............................................................................................................................................ 16 1.3 Terms and abbreviations ....................................................................................................................... 16 1.4 Definitions and conventions ................................................................................................................. 17 AT Interface Synopsis .................................................................................................................... 19 2.1 Interface settings .................................................................................................................................. 19 2.2 AT command syntax ............................................................................................................................. 19 2.3 Information responses .......................................................................................................................... 20 AT Commands According V.25TER .............................................................................................. 21 3.1 A/ Repeat last command.................................................................................................................... 21 3.2 ATD Dial command .......................................................................................................................... 21 3.3 ATD> Originate call from specified memory ................................................................. 23 3.4 ATD> Originate call from active memory (1)............................................................................. 24 3.5 ATD> Originate call from active memory (2)........................................................................... 25 3.6 ATA Call answer................................................................................................................................ 26 3.7 ATH Disconnect existing call ............................................................................................................ 27 3.8 ATS0 Automatic answer incoming call ............................................................................................. 27 3.9 +++ Switch from data mode to command mode ............................................................................... 28 3.10 ATO Switch from command mode to data mode .............................................................................. 29 3.11 ATI Display product identification information ................................................................................ 29 3.12 AT+IPR Set local baud rate temporarily ........................................................................................... 31 3.13 AT+ICF Set control character framing .............................................................................................. 32 3.14 AT+IFC Set local data flow control................................................................................................... 33 3.15 AT&C Set DCD function mode......................................................................................................... 34 3.16 ATE 3.17 AT&V Display current configuration ................................................................................................ 35 3.18 AT&D Set DTR function mode ......................................................................................................... 36 3.19 AT&S Set DSR function mode .......................................................................................................... 36 3.20 ATV Set result code format mode ..................................................................................................... 37 3.21 AT&F Set all current parameters to manufacturer defaults ............................................................... 38 3.22 ATQ Set Result Code Presentation Mode.......................................................................................... 39 3.23 ATX Set CONNECT Result Code Format ........................................................................................ 39 3.24 AT\V Set CONNECT Result Code Format About Protocol .............................................................. 40 3.25 AT&E Set CONNECT Result Code Format About Speed ................................................................ 41 3.26 AT&W Save the user setting to ME .................................................................................................. 42 3.27 ATZ 3.28 AT+CGMI 3.29 AT+CGMM Request model identification ........................................................................................ 44 Enable command echo .............................................................................................................. 35 Restore the user setting from ME.............................................................................................. 42 Request manufacturer identification ............................................................................... 43 SIM7500_SIM7600 Series_AT Command Manual_V1.10 9 2018-10-08 Smart Machine Smart Decision 4 5 3.30 AT+CGMR Request revision identification ...................................................................................... 44 3.31 AT+CGSN Request product serial number identification ................................................................. 45 3.32 AT+CSCS Select TE character set .................................................................................................... 46 3.33 AT+CIMI Request international mobile subscriber identity ............................................................. 47 3.34 AT+CIMIM Request another international mobile subscriber identity ............................................. 47 3.35 AT+GCAP Request overall capabilities ............................................................................................ 48 AT Commands for Status Control .................................................................................................. 50 4.1 AT+CFUN Set phone functionality ................................................................................................... 50 4.2 AT+CPIN Enter PIN.......................................................................................................................... 51 4.3 AT+CICCID Read ICCID from SIM card......................................................................................... 52 4.4 AT+CSIM Generic SIM access ......................................................................................................... 53 4.5 AT+CRSM Restricted SIM access .................................................................................................... 54 4.6 AT+SPIC Times remain to input SIM PIN/PUK ............................................................................... 58 4.7 AT+CSPN Get service provider name from SIM .............................................................................. 59 4.8 AT+CSQ Query signal quality .......................................................................................................... 60 4.9 AT+AUTOCSQ 4.10 AT+CSQDELTA Set RSSI delta change threshold............................................................................ 62 4.11 AT+CATR Configure URC destination interface .............................................................................. 63 4.12 AT+CPOF Power down the module .................................................................................................. 64 4.13 AT+CRESET Reset the module ........................................................................................................ 65 4.14 AT+CACM Accumulated call meter ................................................................................................. 65 4.15 AT+CAMM Accumulated call meter maximum ............................................................................... 66 4.16 AT+CPUC Price per unit and currency table..................................................................................... 67 4.17 AT+CCLK 4.18 AT+CMEE Report mobile equipment error ...................................................................................... 69 4.19 AT+CPAS Phone activity status ........................................................................................................ 70 4.20 AT+SIMEI Set IMEI for the module ................................................................................................. 71 4.21 AT+SMEID Request Mobile Equipment Identifier ........................................................................... 72 4.22 AT+CSVM Voice Mail Subscriber number ....................................................................................... 73 4.23 AT+CUSBPIDSWITCH Change module’s PID................................................................................ 74 4.24 Indication of EONS .............................................................................................................................. 75 4.25 Indication of Voice Mail ....................................................................................................................... 76 Set CSQ report........................................................................................................ 61 Real time clock management .......................................................................................... 68 AT Commands for Network ........................................................................................................... 77 5.1 AT+CREG Network registration ....................................................................................................... 77 5.2 AT+COPS Operator selection ........................................................................................................... 78 5.3 AT+CLCK 5.4 AT+CPWD Change password ........................................................................................................... 82 5.5 AT+CCUG Closed user group ........................................................................................................... 84 5.6 AT+CUSD Unstructured supplementary service data ....................................................................... 85 5.7 AT+CAOC Advice of charge ............................................................................................................ 86 5.8 AT+CSSN Supplementary service notifications................................................................................ 87 5.9 AT+CPOL Preferred operator list ...................................................................................................... 89 5.10 AT+COPN Facility lock .................................................................................................................... 81 Read operator names ...................................................................................................... 91 SIM7500_SIM7600 Series_AT Command Manual_V1.10 10 2018-10-08 Smart Machine Smart Decision 6 5.11 AT+CNMP Preferred mode selection ................................................................................................ 92 5.12 AT+CNBP Preferred band selection .................................................................................................. 93 5.13 AT+CNAOP Acquisitions order preference ...................................................................................... 96 5.14 AT+CPSI Inquiring UE system information ..................................................................................... 97 5.15 AT+CNSMOD Show network system mode ................................................................................... 101 5.16 AT+CEREG EPS network registration status.................................................................................. 102 5.17 AT+CTZU Automatic time and time zone update........................................................................... 104 5.18 AT+CTZR Time and time zone reporting ....................................................................................... 105 5.19 AT+NETMODE WCDMA & TDSCDMA mode select .................................................................. 106 AT Commands for Call Control ................................................................................................... 108 6.1 AT+CVHU Voice hang up control .................................................................................................. 108 6.2 AT+CHUP Hang up call .................................................................................................................. 109 6.3 AT+CBST Select bearer service type .............................................................................................. 109 6.4 AT+CRLP Radio link protocol ......................................................................................................... 111 6.5 AT+CR Service reporting control.....................................................................................................112 6.6 AT+CRC Cellular result codes .........................................................................................................114 6.7 AT+CLCC List current calls............................................................................................................. 115 6.8 AT+CEER Extended error report .....................................................................................................117 6.9 AT+CCWA Call waiting ................................................................................................................... 118 6.10 AT+CHLD Call related supplementary services .............................................................................. 119 6.11 AT+CCFC Call forwarding number and conditions ........................................................................ 121 6.12 AT+CLIP Calling line identification presentation ........................................................................... 122 6.13 AT+CLIR Calling line identification restriction .............................................................................. 124 6.14 AT+COLP Connected line identification presentation .................................................................... 125 6.15 AT+VTS DTMF and tone generation .............................................................................................. 127 6.16 AT+VTD 6.17 AT+CSTA Select type of address .................................................................................................... 129 6.18 AT+CMOD Call mode .................................................................................................................... 130 6.19 AT+VMUTE Speaker mute control ................................................................................................ 131 6.20 AT+CMUT Microphone mute control............................................................................................. 132 6.21 AT+MORING Enable or disable report MO ring URC................................................................... 132 6.22 AT+CSDVC Switch voice channel device ...................................................................................... 133 6.23 AT+CLVL Loudspeaker volume level............................................................................................. 134 6.24 AT+SIDET Set sidetone .................................................................................................................. 135 6.25 AT+CACDBFN 6.26 AT+CPCMREG USB audio control ................................................................................................ 137 6.27 AT+CMICGAIN Adjust mic gain ................................................................................................... 138 6.28 AT+COUTGAIN Adjust out gain ................................................................................................... 139 6.29 AT+CTXVOL Adjust TX voice mic volume .................................................................................. 139 6.30 AT+CTXMICGAIN Adjust TX voice mic gain .............................................................................. 140 6.31 AT+CRXVOL Adjust RX voice output speaker volume................................................................. 141 6.32 AT+CECH Inhibit far-end echo....................................................................................................... 142 6.33 AT+CECDT Inhibit echo during doubletalk ................................................................................... 143 Tone duration .................................................................................................................. 128 Change default ACDB filename ........................................................................... 136 SIM7500_SIM7600 Series_AT Command Manual_V1.10 11 2018-10-08 Smart Machine Smart Decision 7 8 9 6.34 AT+CECWB Inhibit echo in the high band ..................................................................................... 144 6.35 AT+CNSN MIC NOISE suppression .............................................................................................. 145 6.36 AT+CNSLIM MIC NOISE suppression .......................................................................................... 145 6.37 AT+CFNSMOD Adjust parameter fnsMode of RX_VOICE_FNS ................................................. 146 6.38 AT+CFNSIN 6.39 AT+CFNSLVL Adjust parameter fnsTargetNS of RX_VOICE_FNS ............................................. 148 6.40 AT+CECRX Enable or disable VOICE_MOD_ENABLE .............................................................. 149 6.41 AT+CNLPPG Modify the NLPP_gain in DSP ................................................................................ 150 6.42 AT+CNLPPL Modify the NLPP_limit in DSP ................................................................................ 150 6.43 AT+CECM Adjust echo canceller ................................................................................................... 151 6.44 AT+CPCMFRM 6.45 AT+CPTONE Play tone .................................................................................................................. 153 Adjust parameter fnsInputGain of RX_VOICE_FNS ............................................... 147 Set usb audio sample rate to 16k bit .................................................................... 152 AT Commands for SMS............................................................................................................... 155 7.1 AT+CSMS Select message service.................................................................................................. 155 7.2 AT+CPMS Preferred message storage ............................................................................................ 156 7.3 AT+CMGF Select SMS message format ......................................................................................... 158 7.4 AT+CSCA SMS service centre address ........................................................................................... 159 7.5 AT+CSCB Select cell broadcast message indication....................................................................... 160 7.6 AT+CSMP Set text mode parameters .............................................................................................. 161 7.7 AT+CSDH 7.8 AT+CNMA New message acknowledgement to ME/TA ................................................................ 163 7.9 AT+CNMI New message indications to TE .................................................................................... 164 7.10 AT+CGSMS Select service for MO SMS messages ....................................................................... 166 7.11 AT+CMGL List SMS messages from preferred store ..................................................................... 167 7.12 AT+CMGR Read message .............................................................................................................. 171 7.13 AT+CMGS Send message ............................................................................................................... 175 7.14 AT+CMSS 7.15 AT+CMGW Write message to memory .......................................................................................... 177 7.16 AT+CMGD Delete message ............................................................................................................ 179 7.17 AT+CMGMT Change message status ............................................................................................. 180 7.18 AT+CMVP Set message valid period .............................................................................................. 181 7.19 AT+CMGRD Read and delete message .......................................................................................... 182 7.20 AT+CMGSEX Send message.......................................................................................................... 183 7.21 AT+CMSSEX Send multi messages from storage .......................................................................... 184 7.22 AT+CMGP Set cdma/evdo text mode parameters ........................................................................... 185 Show text mode parameters .......................................................................................... 162 Send message from storage .......................................................................................... 176 AT Commands for Phonebook ..................................................................................................... 187 8.1 AT+CPBS Select phonebook memory storage ................................................................................ 187 8.2 AT+CPBR Read phonebook entries ................................................................................................ 188 8.3 AT+CPBF 8.4 AT+CPBW Write phonebook entry ................................................................................................. 191 8.5 AT+CNUM Subscriber number....................................................................................................... 192 Find phonebook entries ................................................................................................. 190 AT Commands for GPRS ............................................................................................................. 194 9.1 AT+CGREG GPRS network registration status .............................................................................. 194 SIM7500_SIM7600 Series_AT Command Manual_V1.10 12 2018-10-08 Smart Machine Smart Decision 9.2 AT+CGATT Packet domain attach or detach .................................................................................. 195 9.3 AT+CGACT PDP context activate or deactivate ............................................................................. 196 9.4 AT+CGDCONT Define PDP context .............................................................................................. 197 9.5 AT+CGDSCONT Define Secondary PDP Context ......................................................................... 199 9.6 AT+CGTFT Traffic Flow Template ................................................................................................ 202 9.7 AT+CGQREQ Quality of service profile (requested) ..................................................................... 205 9.8 AT+CGEQREQ 3G quality of service profile (requested) .............................................................. 207 9.9 AT+CGQMIN Quality of service profile (minimum acceptable) .................................................... 212 9.10 AT+CGEQMIN 3G quality of service profile (minimum acceptable) ............................................ 215 9.11 AT+CGDATA Enter data state......................................................................................................... 219 9.12 AT+CGPADDR Show PDP address ................................................................................................ 220 9.13 AT+CGCLASS GPRS mobile station class .................................................................................. 222 9.14 AT+CGEREP GPRS event reporting .............................................................................................. 223 9.15 AT+CGAUTH Set type of authentication for PDP-IP connections of GPRS.................................. 225 10 Hardware Related Commands ................................................................................................. 227 10.1 AT+CVALARM 10.2 AT+CVAUXS Set state of the pin named VREG_AUX1 ............................................................... 228 Low and high voltage Alarm................................................................................ 227 10.3 AT+CVAUXV Set voltage value of the pin named VREG_AUX1 ................................................. 229 10.4 AT+CADC Read ADC value........................................................................................................... 230 10.5 AT+CADC2 Read ADC2 value ....................................................................................................... 230 10.6 AT+CMTE Control the module whether power shutdown when the module’s temperature upon the critical temperature ......................................................................................................................................... 231 10.7 AT+CPMVT Low and high voltage Power Off ............................................................................... 233 10.8 AT+CDELTA Set the module go to recovery mode ........................................................................ 234 10.9 AT+CRIIC Read values from register of IIC device ....................................................................... 234 10.10 AT+CWIIC Write values to register of IIC device .......................................................................... 235 10.11 AT+CBC Read the voltage value of the power supply .................................................................... 236 10.12 AT+CPMUTEMP Read the temperature of the module .................................................................. 236 11 AT Commands for SIM Application Toolkit ............................................................................ 238 11.1 AT+STIN SAT Indication ................................................................................................................ 238 11.2 AT+STGI Get SAT information ...................................................................................................... 239 11.3 AT+STGR SAT respond .................................................................................................................. 242 11.4 AT+STK STK switch ...................................................................................................................... 243 11.5 AT+STKFMT Set STK pdu format ................................................................................................. 244 11.6 AT+STENV Original STK PDU Envelope Command .................................................................... 245 11.7 AT+STSM Get STK Setup Menu List with PDU Mode ................................................................. 246 12 AT Commands for Hardware ................................................................................................... 247 12.1 AT+IPREX Set local baud rate permanently ................................................................................... 247 12.2 AT+CFGRI Indicate RI when using URC ....................................................................................... 248 12.3 AT+CSCLK Control UART Sleep ..................................................................................................... 249 12.4 AT+CMUX Enable the multiplexer over the UART ....................................................................... 250 12.5 AT+CGFUNC Enable/disable the function for the special GPIO ...................................................... 251 12.6 AT+CGDRT Set the direction of specified GPIO............................................................................ 253 SIM7500_SIM7600 Series_AT Command Manual_V1.10 13 2018-10-08 Smart Machine Smart Decision 12.7 AT+CGSETV Set the value of specified GPIO ............................................................................... 254 12.8 AT+CGGETV Get the value of specified GPIO.............................................................................. 254 12.9 AT+CGISR Set GPIO interrupt trigger condition ........................................................................... 255 13 AT Commands for File System ................................................................................................ 257 13.1 AT+FSCD Select directory as current directory .............................................................................. 257 13.2 AT+FSMKDIR 13.3 AT+FSRMDIR Delete directory in current directory ...................................................................... 259 13.4 AT+FSLS List directories/files in current directory ........................................................................ 260 13.5 AT+FSDEL Delete file in current directory .................................................................................... 261 13.6 AT+FSRENAME 13.7 AT+FSATTRI 13.8 AT+FSMEM Check the size of available memory .......................................................................... 264 13.9 AT+FSLOCA Select storage place .................................................................................................. 264 Make new directory in current directory ............................................................... 258 Rename file in current directory ........................................................................ 262 Request file attributes .............................................................................................. 263 13.10 AT+FSCOPY Copy an appointed file ............................................................................................. 265 14 AT Commands for File Transmission ...................................................................................... 268 14.1 AT+CFTRANRX Transfer a file to EFS ......................................................................................... 268 14.2 AT+CFTRANTX Transfer a file from EFS to host ......................................................................... 269 15 AT Commands for Internet Service ......................................................................................... 271 15.1 PDP .................................................................................................................................................... 271 15.1.1 AT+CSOCKSETPN Set active PDP context’s profile number ................................................................ 271 15.1.2 AT+CIPDNSSET Set DNS query parameters.......................................................................................... 272 15.1.3 AT+CDNSGIP Query the IP address of given domain name ................................................................... 273 15.1.4 AT+CDNSGHNAME 15.1.5 AT+CPING Ping destination address....................................................................................................... 275 15.1.6 AT+CPINGSTOP Stop an ongoing ping session ..................................................................................... 277 15.1.7 AT+CTCPFIN 15.1.8 AT+CTCPKA Conigure TCP heartbeat ................................................................................................... 279 15.1.9 AT+CTEUTP Set unknown incoming TCP packet echo .......................................................................... 280 15.1.10 AT+CUPURE 15.1.11 AT+CINICMPALLOW Preferred ICMP filter ......................................................................................... 282 15.1.12 AT+CDNSSRV Get dns server ip address ............................................................................................... 283 15.2 Query the domain name of given IP address ........................................................ 274 Configure TCP FIN ......................................................................................................... 278 Set UDP port unreachable ICMP echo ............................................................................. 281 HTP .................................................................................................................................................... 284 15.2.1 AT+CHTPSERV Set HTP server info ...................................................................................................... 284 15.2.2 AT+CHTPUPDATE 15.2.3 Unsolicited HTP Codes .............................................................................................................................. 287 15.3 Updating date time using HTP protocol ................................................................. 286 NTP .................................................................................................................................................... 287 15.3.1 AT+CNTP Update system time ............................................................................................................... 287 15.3.2 Unsolicited NTP Codes .............................................................................................................................. 288 16 AT Commands for Open/Close Network ................................................................................. 289 16.1 AT+CNETSTART Open network .................................................................................................... 289 16.2 AT+CNETSTOP Close network ...................................................................................................... 290 16.3 AT+CNETIPADDR Inquire PDP address ....................................................................................... 291 16.4 Unsolicited Open/Close network command Codes .................................................................. 291 SIM7500_SIM7600 Series_AT Command Manual_V1.10 14 2018-10-08 Smart Machine Smart Decision 17 AT Commands for GPS ........................................................................................................... 293 17.1 AT+CGPS Start/Stop GPS session .................................................................................................. 293 17.2 AT+CGPSINFO Get GPS fixed position information ..................................................................... 294 17.3 AT+CGPSCOLD 17.4 AT+CGPSHOT Hot start GPS......................................................................................................... 296 17.5 AT+CGPSURL Set AGPS default server URL ............................................................................... 297 17.6 AT+CGPSSSL Set AGPS transport security ................................................................................... 298 17.7 AT+CGPSAUTO Start GPS automatic ........................................................................................... 298 17.8 AT+CGPSNMEA Configure NMEA sentence type ........................................................................ 299 17.9 AT+CGPSNEMARATE Cold start GPS .................................................................................................... 296 Set NMEA output rate ........................................................................... 300 17.10 AT+CGPSMD Configure AGPS MO method ................................................................................. 301 17.11 AT+CGPSFTM Start GPS test mode .............................................................................................. 302 17.12 AT+CGPSDEL Delete the GPS information ................................................................................... 303 17.13 AT+CGPSXE Enable/Disable GPS XTRA function ....................................................................... 304 17.14 AT+CGPSXD Download XTRA assistant file ................................................................................ 305 17.15 AT+CGPSXDAUTO Download XTRA assistant file automatically............................................... 306 17.16 AT+CGPSINFOCFG Report GPS NMEA-0183 sentence .............................................................. 306 17.17 AT+CGPSPMD Configure positioning mode ................................................................................. 308 17.18 AT+CGPSMSB Configure based mode switch to standalone ......................................................... 309 17.19 AT+CGPSHOR Configure positioning desired accuracy ................................................................ 310 17.20 AT+CGPSNOTIFY LCS respond positioning request .....................................................................311 17.21 AT+CGNSSINFO Get GNSS fixed position information ............................................................... 312 17.22 AT+CGNSSMODE Configure GNSS support mode ...................................................................... 314 17.23 Unsolicited XTRA download Codes .................................................................................................. 315 17.24 AT+CLBS Base station location...................................................................................................... 315 17.25 AT+CLBSCFG Base station location configure .............................................................................. 318 17.26 AT+CASSISTLOC Base station location of LTE/CDMA1x mode ................................................. 319 18 Audio Application Commands ................................................................................................. 321 18.1 AT+CREC 18.2 AT+CCMXPLAYWAV Play wav audio file .................................................................................. 322 18.3 AT+CCMXSTOPWAV Stop playing wav audio file ..................................................................... 323 18.4 AT+CCMXPLAY Play audio file .................................................................................................... 323 18.5 AT+CCMXSTOP Stop playing audio file ....................................................................................... 324 19 record wav audio file .................................................................................................. 321 Appendixes .............................................................................................................................. 325 19.1 Verbose code and numeric code ......................................................................................................... 325 19.2 Response string of AT+CEER ............................................................................................................ 325 19.3 Summary of CME ERROR codes ...................................................................................................... 329 19.4 Summary of CMS ERROR codes ...................................................................................................... 332 SIM7500_SIM7600 Series_AT Command Manual_V1.10 15 2018-10-08 1 1.1 Introduction Scope The present document describes the AT Command Set for the SIMCom Module: SIM7500 series, SIM7600 series. More information about the SIMCom Module which includes the Software Version information can be retrieved by the command ATI. In this document, a short description, the syntax, the possible setting values and responses, and some examples of AT commands are presented. Prior to using the Module, please read this document and the Version History to know the difference from the previous document. In order to implement communication successfully between Customer Application and the Module, it is recommended to use the AT commands in this document, but not to use some commands which are not included in this document. 1.2 References The present document is based on the following standards: [1] ETSI GSM 01.04: Abbreviations and acronyms. [2] 3GPP TS 27.005: Use of Data Terminal Equipment – Data Circuit terminating Equipment (DTE – DCE) interface for Short Message Service (SMS) and Cell Broadcast Service (CBS). [3] 3GPP TS 27.007: AT command set for User Equipment (UE). [4] WAP-224-WTP-20010710-a [5] WAP-230-WSP-20010705-a [6] WAP-209-MMSEncapsulation-20010601-a 1.3 Terms and abbreviations For the purposes of the present document, the following abbreviations apply: AT ATtention; the two-character abbreviation is used to start a command line to be sent from TE/DTE to TA/DCE DCE Data Communication Equipment; Data Circuit terminating Equipment DCS Digital Cellular Network DTE Data Terminal Equipment Smart Machine Smart Decision 1.4 DTMF EDGE EGPRS GPIO GPRS GSM HSDPA HSUPA I2C IMEI IMSI ME MO MS MT PCS PDU PIN PUK SIM SMS SMS–SC TA TE UE UMTS USIM WCDMA FTP HTTP RTC URC Dual Tone Multi–Frequency Enhanced Data GSM Environment Enhanced General Packet Radio Service General–Purpose Input/Output General Packet Radio Service Global System for Mobile communications High Speed Downlink Packet Access High Speed Uplink Packet Access Inter–Integrated Circuit International Mobile station Equipment Identity International Mobile Subscriber Identity Mobile Equipment Mobile–Originated Mobile Station Mobile–Terminated; Mobile Termination Personal Communication System Protocol Data Unit Personal Identification Number Personal Unlock Key Subscriber Identity Module Short Message Service Short Message Service – Service Center Terminal Adaptor; e.g. a data card (equal to DCE) Terminal Equipment; e.g. a computer (equal to DTE) User Equipment Universal Mobile Telecommunications System Universal Subscriber Identity Module Wideband Code Division Multiple Access File Transfer Protocol Hyper Text Transfer Protocol Real Time Clock Unsolicited Result Code Definitions and conventions 1. For the purposes of the present document, the following syntactical definitions apply: Carriage return character. Linefeed character. <…> Name enclosed in angle brackets is a syntactical element. Brackets themselves do not appear in the command line. […] Optional subparameter of AT command or an optional part of TA information response is enclosed in square brackets. Brackets themselves do not appear in the command line. SIM7500_SIM7600 Series_AT Command Manual_V1.10 17 2018-10-08 Smart Machine Smart Decision If subparameter is not given, its value equals to its previous value or the recommended default value. Underlined defined subparameter value is the recommended default setting or factory setting. underline 2. Document conventions: ♦ ♦ ♦ ♦ Display the examples of AT commands with Italic format. Not display blank-line between command line and responses or inside the responses. Generally, the characters and are intentionally omitted throughout this document. If command response is ERROR, not list the ERROR response inside command syntax. NOTE: AT commands and responses in figures may be not following above conventions. 3. Special marks for commands or parameters: SIM PIN – Is the command PIN protected? YES – NO References – AT command can be used only when SIM PIN is READY. – AT command can be used when SIM card is absent or SIM PIN validation is pending. Where is the derivation of command? 3GPP TS 27.007 – 3GPP Technical Specification 127 007. V.25ter – ITU–T Recommendation V.25ter. Vendor – This command is supported by SIMCom. SIM7500_SIM7600 Series_AT Command Manual_V1.10 18 2018-10-08 Smart Machine Smart Decision 2 2.1 AT Interface Synopsis Interface settings Between Customer Application and the Module, standardized RS–232 interface is used for the communication, and default values for the interface settings as following: 115200bps, 8 bit data, no parity, 1 bit stop, no data stream control. 2.2 AT command syntax The prefix “AT” or “at” (no case sensitive) must be included at the beginning of each command line (except A/ and +++), and the character is used to finish a command line so as to issue the command line to the Module. It is recommended that a command line only includes a command. When Customer Application issues a series of AT commands on separate command lines, leave a pause between the preceding and the following command until information responses or result codes are retrieved by Customer Application, for example, “OK” is appeared. This advice avoids too many AT commands are issued at a time without waiting for a response for each command. In the present document, AT commands are divided into three categories: Basic Command, S Parameter Command, and Extended Command. 1. Basic Command The format of Basic Command is “AT ” or “AT& ”, “ ” is the command name, and “ ” is/are the parameter(s) for the basic command, and optional. An example of Basic Command is “ATE ”, which informs the TA/DCE whether received characters should be echoed back to the TE/DTE according to the value of “ ”; “ ” is optional and a default value will be used if omitted. 2. S Parameter Command The format of S Parameter Command is “ATS = ”, “ ” is the index of the S–register to set, and “ ” is the value to assign to it. “ ” is optional; in this case, the format is “ATS ”, and then a default value is assigned. 3. Extended Command The Extended Command has several formats, as following table list: SIM7500_SIM7600 Series_AT Command Manual_V1.10 19 2018-10-08 Smart Machine Smart Decision Table 2-1: Types of Extended Command Command Type Syntax Comments Test Command AT+ =? Test the existence of the command; give some information about the command subparameters. Read Command AT+ ? Check the current values of subparameters. Write Command AT+ =<…> Set user-definable subparameter values. Execution Command AT+ Read non-variable subparameters determined by internal processes. NOTE: The character “+” between the prefix “AT” and command name may be replaced by other character. For example, using “#” or “$”instead of “+”. 2.3 Information responses If the commands included in the command line are supported by the Module and the subparameters are correct if presented, some information responses will be retrieved by from the Module. Otherwise, the Module will report “ERROR” or “+CME ERROR” or “+CMS ERROR” to Customer Application. Information responses start and end with , i.e. the format of information responses is “ ”. Inside information responses, there may be one or more . Throughout this document, only the responses are presented, and are intentionally omitted. SIM7500_SIM7600 Series_AT Command Manual_V1.10 20 2018-10-08 Smart Machine Smart Decision 3 3.1 AT Commands According V.25TER A/ Repeat last command Description This command is used for implement previous AT command repeatedly (except A/), and the return value depends on the last AT command. If A/ is issued to the Module firstly after power on, the response “OK” is only returned. SIM PIN NO References V.25ter Syntax Execution Command A/ Responses The response the last AT command return Examples AT+GCAP +GCAP:+CGSM,+FCLASS,+DS OK A/ +GCAP:+CGSM,+FCLASS,+DS OK 3.2 ATD Dial command Description This command is used to list characters that may be used in a dialling string for making a call or controlling supplementary services. NOTE: 1. Support several “P” or “p” in the DTMF string but the valid auto-sending DTMF after characters “P” or “p” should not be more than 29. 2. Auto-sending DTMF after character “P” or “p” should be ASCII character in the set 0-9, *, #. SIM PIN NO References V25.ter SIM7500_SIM7600 Series_AT Command Manual_V1.10 21 2018-10-08 Smart Machine Smart Decision Syntax Execution Commands ATD [ ][;] Responses Originate a voice call successfully: OK VOICE CALL: BEGIN Originate a data call successfully: CONNECT [ ] Originate a call unsuccessfully during command execution: ERROR Originate a call unsuccessfully for failed connection recovery: NO CARRIER Originate a call unsuccessfully for error related to the MT: +CME ERROR: Defined values String of dialing digits and optionally V.25ter modifiers dialing digits: 0 1 2 3 4 5 6 7 8 9 * # + A B C Following V.25ter modifiers are ignored: , T P ! W @ String of GSM modifiers: I Activates CLIR (disables presentation of own phone number to called party) i Deactivates CLIR (enables presentation of own phone number to called party) G Activate Closed User Group explicit invocation for this call only g Deactivate Closed User Group explicit invocation for this call only <;> The termination character ";" is mandatory to set up voice calls. It must not be used for data and fax calls. CONNECT result code string; the string formats please refer ATX/AT\V/AT&E command. Service failure result code string; the string formats please refer +CME ERROR result code and AT+CMEE command. Examples ATD10086; OK VOICE CALL:BEGIN SIM7500_SIM7600 Series_AT Command Manual_V1.10 22 2018-10-08 Smart Machine Smart Decision 3.3 ATD> Originate call from specified memory Description This command is used to originate a call using specified memory and index number. SIM PIN NO References V.25ter Syntax Execution Commands ATD> [;] Responses Originate a voice call successfully: OK VOICE CALL: BEGIN Originate a data call successfully: CONNECT [ ] Originate a call unsuccessfully during command execution: ERROR Originate a call unsuccessfully for failed connection recovery: NO CARRIER Originate a call unsuccessfully for error related to the MT: +CME ERROR: Defined values Phonebook storage: (For detailed description of storages see AT+CPBS) "DC" ME dialed calls list "MC" ME missed (unanswered received) calls list "RC" ME received calls list "SM" SIM phonebook "ME" UE phonebook "FD" SIM fixed dialing phonebook "ON" MSISDN list "LD" Last number dialed phonebook "EN" Emergency numbers Integer type memory location in the range of locations available in the selected memory, i.e. the index returned by AT+CPBR. <;> The termination character ";" is mandatory to set up voice calls. It must not be used for data and fax calls. SIM7500_SIM7600 Series_AT Command Manual_V1.10 23 2018-10-08 Smart Machine Smart Decision CONNECT result code string; the string formats please refer ATX/AT\V/AT&E command. Service failure result code string; the string formats please refer +CME ERROR result code and AT+CMEE command. Examples ATD>SM3; OK VOICE CALL: BEGIN 3.4 ATD> Originate call from active memory (1) Description This command is used to originate a call to specified number. SIM PIN NO References V.25ter Syntax Execution Commands ATD> [;] Responses Originate a voice call successfully: OK VOICE CALL: BEGIN Originate a data call successfully: CONNECT [ ] Originate a call unsuccessfully during command execution: ERROR Originate a call unsuccessfully for failed connection recovery: NO CARRIER Originate a call unsuccessfully for error related to the MT: +CME ERROR: Defined values Integer type memory location in the range of locations available in the selected memory, i.e. the index number returned by AT+CPBR. <;> The termination character ";" is mandatory to set up voice calls. It must not be used for data and fax SIM7500_SIM7600 Series_AT Command Manual_V1.10 24 2018-10-08 Smart Machine Smart Decision calls. CONNECT result code string; the string formats please refer ATX/AT\V/AT&E command. Service failure result code string; the string formats please refer +CME ERROR result code and AT+CMEE command. Examples ATD>2; OK VOICE CALL: BEGIN 3.5 ATD> Originate call from active memory (2) Description This command is used to originate a call to specified number. SIM PIN NO References V.25ter Syntax Execution Commands ATD> [;] Responses Originate a voice call successfully: OK VOICE CALL: BEGIN Originate a data call successfully: CONNECT [ ] Originate a call unsuccessfully during command execution: ERROR Originate a call unsuccessfully for failed connection recovery: NO CARRIER Originate a call unsuccessfully for error related to the MT: +CME ERROR: Defined values String type value, which should equal to an alphanumeric field in at least one phone book entry in the searched memories. formatted as current TE character set specified by AT+CSCS. must be double quoted. SIM7500_SIM7600 Series_AT Command Manual_V1.10 25 2018-10-08 Smart Machine Smart Decision <;> The termination character ";" is mandatory to set up voice calls. It must not be used for data and fax calls. CONNECT result code string; the string formats please refer ATX/AT\V/AT&E command. Service failure result code string; the string formats please refer +CME ERROR result code and AT+CMEE command. Examples ATD>”Kobe”; OK VOICE CALL: BEGIN 3.6 ATA Call answer Description This command is used to make remote station to go off-hook, e.g. answer an incoming call. If there is no an incoming call and entering this command to TA, it will be return “NO CARRIER” to TA. SIM PIN YES References V.25ter Syntax Execution Commands ATA Responses For voice call: OK VOICE CALL: BEGIN For data call, and TA switches to data mode: CONNECT No connection or no incoming call: NO CARRIER Examples ATA VOICE CALL: BEGIN OK SIM7500_SIM7600 Series_AT Command Manual_V1.10 26 2018-10-08 Smart Machine Smart Decision 3.7 ATH Disconnect existing call Description This command is used to disconnect existing call. Before using ATH command to hang up a voice call, it must set AT+CVHU=0. Otherwise, ATH command will be ignored and “OK” response is given only. This command is also used to disconnect PS data call, and in this case it doesn’t depend on the value of AT+CVHU. SIM PIN NO References V.25ter Syntax Execution Command ATH Responses If AT+CVHU=0: VOICE CALL: END: