STM32F3DISCOVERY Discovery Kit For STM32F303xx Microcontrollers User Manual

• Figure 1. STM32F3DISCOVERY
• Table 1. Applicable tools
• 1 Conventions
  • Table 2. ON/OFF conventions
• 2 Quick start
  • 2.1 Getting started
  • 2.2 System requirements
  • 2.3 Development toolchain supporting the STM32F3DISCOVERY
  • 2.4 Order code
• 3 Features
• 4 Hardware and layout
  • Figure 2. Hardware block diagram
  • Figure 3. Board layout (top view)
  • Figure 4. Board layout (bottom view)
  • 4.1 STM32F303VCT6 microcontroller
    • Figure 5. STM32F303VCT6 package
    • Figure 6. STM32F303VCT6 block diagram
  • 4.2 Embedded ST-LINK/V2
    • Figure 7. Typical configuration
    • Table 3. Jumper states
    • 4.2.1 Using ST-LINK/V2 to program/debug the STM32F303VCT6 on board
      • Figure 8. STM32F3DISCOVERY connections image
    • 4.2.2 Using ST-LINK/V2 to program/debug an external STM32 application
      • Table 4. Debug connector CN3 (SWD)
      • Figure 9. ST-LINK/V2 connections image
  • 4.3 Power supply and power selection
  • 4.4 LEDs
  • 4.5 Pushbuttons
  • 4.6 USB device supported
  • 4.7 E-compass/accelerometer MEMS (ST MEMS LSM303DLHC)
  • 4.8 Gyroscope MEMS (ST MEMS L3GD20)
  • 4.9 JP3 (Idd)
  • 4.10 OSC clock
    • 4.10.1 OSC clock supply
    • 4.10.2 OSC 32 kHz clock supply
  • 4.11 Solder bridges
    • Table 5. Solder bridges
  • 4.12 Extension connectors
    • Table 6. STM32F303VCT6 MCU pin description versus board function
• 5 Mechanical drawing
  • Figure 10. STM32F3DISCOVERY mechanical drawing
• 6 STM32F3DISCOVERY electrical schematics
  • Figure 11. STM32F3DISCOVERY top level
  • Figure 12. ST-LINK/V2 (SWD only)
  • Figure 13. STM32F303VCT6 MCU
  • Figure 14. Peripherals
• 7 Revision history
  • Table 7. Document revision history