(EN) Workspace Basic Installation Guide Sabre Red
Sabre%20Red%20Workspace%20Basic%20Installation%20Guide
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 7
| Download | |
| Open PDF In Browser | View PDF |
Sabre Red Workspace Basic Installation User Guide BEFORE YOU START This document describes a basic installation of The Sabre® Red™ Workspace for users who: Can download files directly from the Internet. Have sufficient network bandwidth to download the system files in a reasonable amount of time. Have Operating System privileges to install files onto their own hard drive. If your environment does not meet the criteria above, refer to the Sabre Red Workspace Advanced Installation Guide for alternative ways to install and deploy the application (Advanced Installation Guide only available in English at the moment). HU UH These instructions assume you will not change the recommended default settings and file paths. Please note: This is a preview of the installation of the Workspace, but not yet available. The software will be available after July 15, 2010. ACCESS MYSABRE WEBSITE Navigate to https://my.sabre.com and enter your MySabre® HU UH credentials. Click Sign In. The Red Workspace Welcome screen appears. Page 1 of 7 CHECK SYSTEM COMPATIBILITY If your workstation has Windows 7 and Windows Vista and you have not used MySabre with the Sabre VPN previously, you need to download and run a special utility before you continue to install the Red Workspace. This utility ensures that the Workspace can connect to the Sabre System via the Sabre VPN. Download and run Sabre VPN utility HU U If you have used MySabre with the Sabre VPN on these operating systems previously, you do not need to run this utility. If you have concerns about system compatibility, you can perform a system check by clicking the link labeled Run System Compatibility Check. DOWNLOAD THE SABRE RED WORKSPACE INSTALL PROGRAM To start the download of the installation program, click Install the Sabre Red Workspace. DOWNLOAD AND RUN SABRE RED WORKSPACE INSTALL PROGRAM Click Run to complete download of the install program and run it. Based on your security settings, an “unknown publisher” security warning may appear. If you see this security warning, click Run to continue. SABRE RED WORKSPACE BASIC INSTALLATION user guide Page 2 of 7 CHOOSE DEFAULT INSTALL DIRECTORY Click OK to accept the default directory. Sabre recommends that you do not change the root directory for the Red Workspace system files. After you click OK, the system processes initial files in preparation for the installation. A progress screen appears. Depending on your Internet connection speed, this may take several seconds. SIGN IN TO SABRE RED WORKSPACE Enter your Sabre Red Workspace credentials. Click Sign In. Sabre Red Workspace identifies your personal configuration. SABRE RED WORKSPACE BASIC INSTALLATION user guide Page 3 of 7 If you enter credentials that are not valid, an error message appears. Enter valid credentials and try again. If the network is disconnected, an error message appears. Verify your network connection. SABRE RED WORKSPACE BASIC INSTALLATION user guide Page 4 of 7 ACCEPT LICENSE AGREEMENT Check the box to acknowledge and accept the software license. Click Next. CONFIRM INSTALLATION OPTIONS The installation program summarizes the options you chose. Click Install to download configuration and system components. SABRE RED WORKSPACE BASIC INSTALLATION user guide Page 5 of 7 DOWNLOAD ADDITIONAL SYSTEM FILES The download begins, and a progress bar appears. When the download completes, the Red Workspace starts. INITIAL LAUNCH The system automatically detects whether you have used a previous version of MySabre. If you have, the system copies your user preferences to the Red Workspace to allow you to immediately continue using the system with the same settings as before. If you have never used MySabre, the system prompts you for the basic information it needs to start the Red Workspace. The following information is required: Agent Profile: Name and contact information for the agent. LNIATA: The Sabre GDS session address (six alphanumeric characters). Connection Type: Private connection for agencies with direct connections to the Sabre GDS, or SSL VPN connection for users with public Internet connections. Defaults apply for all other user preferences. To change default preferences after the application opens, go to the Tools menu and select Options. SABRE RED WORKSPACE BASIC INSTALLATION user guide Page 6 of 7 COPY USER PREFERENCES If you are an existing MySabre user, then the Red Workspace copies your MySabre user preference settings. When this process completes, a confirmation screen appears. To confirm that the Red Workspace copied your settings successfully, click any of the links. Also, to install additional Sabre Travel Network® Desktop applications, click Go to Download Page. When you are ready to use the Red Workspace, click OK. Note: If you installed Sabre Travel Network desktop applications (such as Sabre Print Module) on your workstation in MySabre, you do not have to re-install them because the Red Workspace can access them. DAILY LAUNCH OF SABRE RED WORKSPACE Now that the Red Workspace installed successfully, you can use a desktop icon to launch the Workspace. This is different from the previous version of MySabre, where you opened a web page to sign-in. With the Red Workspace, you use the web page for the initial installation only. To launch the Red Workspace, do one of the following: Double-click the icon on your desktop. If multiple users installed Sabre Red Workspace on your workstation, one icon exists on the desktop for each user. In this example icon, 9BD7 is the PCC and 123456 is the Agent ID. Double-click your personal icon to launch your own version of the Workspace. Open All Programs from the Windows Start menu, and select Sabre Red Workspace. UNINSTALLING SABRE RED WORKSPACE There is a utility which will uninstall an individual user’s files from the workstation. The program can be found in the Windows Start Menu, as shown on the right. This program will then guide you through a few steps to remove the application. SABRE RED WORKSPACE BASIC INSTALLATION user guide Page 7 of 7 2010 Sabre Inc. All rights reserved. Sabre, Sabre Holdings, and Sabre Travel Network are trademarks and/or service marks of an affiliate of Sabre Holding Corporation. All other trademarks, service marks, and trade names are the property of their respective owners. 3.0
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Sabre Travel Network Create Date : 2010:07:14 15:45:10Z Modify Date : 2016:09:14 10:24:16-07:00 Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : Sabre Travel Network Title : (EN) Workspace Basic Installation Guide Creator Tool : Microsoft® Office Word 2007 Metadata Date : 2016:09:14 10:24:16-07:00 Producer : Microsoft® Office Word 2007 Document ID : uuid:3c3e27b5-cc51-ab4c-b664-6b4c989afb5b Instance ID : uuid:4e91b2b3-2fe9-434e-8101-820cf93daab4 Page Count : 7EXIF Metadata provided by EXIF.tools