ICO PE 285 GU FR V1 Telium Manager Reference Manual
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 166
| Download | |
| Open PDF In Browser | View PDF |
TELIUM MANAGER REFERENCE MANUAL Reference: ICO-OPE-00986 Revision: 1.5 Enter Date: 01/12/2015 www.ingenico.com 28/32, boulevard de Grenelle, 75015 Paris - France / (T) +33 (0)1 58 01 80 00 / (F) +33 (0)1 58 01 91 35 Ingenico – S.A. au capital de 53 086 309 € / 317 218 758 RCS PARIS REFERENCE MANUAL ICO-OPE-00986 Restricted Table of Contents 1 Information relative to document __________________________ 11 1_1 Change History ______________________________________________________ 11 1_2 Validation ___________________________________________________________ 11 1_3 Objective ___________________________________________________________ 11 2 Function of applications manager _________________________ 12 3 General information _____________________________________ 13 3_1 Display _____________________________________________________________ 13 3_2 Display area_________________________________________________________ 13 3_3 Keypad ____________________________________________________________ 14 3_4 Function area _______________________________________________________ 14 3_5 Terminal screens _____________________________________________________ 15 4 Condition of terminal at power-up _________________________ 16 5 Preparatory information for initialization ____________________ 19 5_1 Storage of parameters entered __________________________________________ 19 5_2 Drop data entry in progress _____________________________________________ 19 5_3 Parameters forming initialization _________________________________________ 19 5_4 Access to parameters by a shortcut ______________________________________ 19 6 Initialization of “applications manager” parameters __________ 20 6_1 Initialization of language _______________________________________________ 23 6_2 Initialization of date and time ____________________________________________ 23 6_2_1 Setting the date ________________________________________________________24 6_2_2 Setting the time ________________________________________________________24 2/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted 6_2_3 Setting the date format __________________________________________________24 6_2_4 Setting the time format __________________________________________________24 6_3 Setting the terminal number ____________________________________________ 25 6_4 Initialization of currency ________________________________________________ 25 6_5 Initialization of switchboard _____________________________________________ 26 6_5_1 Switchboard configured with “Yes” _________________________________________26 6_5_2 Switchboard configured with “Alpha” ________________________________________27 6_6 Initialization of PINPAD ________________________________________________ 27 6_6_1 Initialization of pinpad type _______________________________________________28 6_6_2 Pinpad auto detect _____________________________________________________29 6_6_3 Initialization of the stripe reader on a P30 pinpad ______________________________29 6_6_4 Initialization of the background color of a IPP250 pinpad ________________________29 6_7 Initialization of the contactless function ____________________________________ 30 6_8 Initialization of magnetic strip reader ______________________________________ 31 6_9 Display of Serial Number _______________________________________________ 31 6_10 Initialization of the network access ______________________________________ 32 6_10_1 PSTN network ________________________________________________________33 6_10_1_1 PSTN type _________________________________________________________33 6_10_1_2 Gateway for IP/ETH access ___________________________________________33 6_10_1_3 SSL for IP/ETH access _______________________________________________33 6_10_1_4 IP address _________________________________________________________34 6_10_1_5 port ______________________________________________________________34 6_10_2 ISDN network ________________________________________________________35 6_10_3 External modem network _______________________________________________35 6_10_4 External GSM network _________________________________________________36 6_10_5 Internal GSM network __________________________________________________36 6_10_5_1 V32bis PAD ________________________________________________________37 6_10_5_2 V32bis prefixed _____________________________________________________37 6_10_5_3 Connection type on base _____________________________________________38 6_10_5_4 Display in the status bar ______________________________________________38 6_10_6 GPRS network _______________________________________________________39 6_10_6_1 Serial link _________________________________________________________39 6_10_6_2 APN______________________________________________________________39 6_10_6_3 Login _____________________________________________________________39 6_10_6_4 Password _________________________________________________________40 3/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted 6_10_6_5 Gateway __________________________________________________________40 6_10_6_6 SSL ______________________________________________________________40 6_10_6_7 IP address _________________________________________________________41 6_10_6_8 Port ______________________________________________________________41 6_10_6_9 GPRS module startup ________________________________________________41 6_10_6_10 Connection type on base ____________________________________________42 6_10_6_11 Display in the status bar _____________________________________________42 6_10_7 IP EXT network _______________________________________________________43 6_10_7_1 Gateway __________________________________________________________43 6_10_7_2 SSL ______________________________________________________________43 6_10_7_3 IP address _________________________________________________________44 6_10_7_4 Port ______________________________________________________________44 6_11 Initialization of fallback network ________________________________________ 44 6_12 Initialization of cash register connection __________________________________ 46 6_12_1 Activation of the cash register connection ___________________________________46 6_12_2 Initialization of the cash register connection _________________________________46 6_13 Initialization of TMS network ___________________________________________ 47 6_13_1 Internal modem TMS network ____________________________________________48 6_13_1_1 TMS type __________________________________________________________48 6_13_1_2 TMS PAD number ___________________________________________________49 6_13_1_3 TMS center number _________________________________________________49 6_13_2 ISDN TMS network ____________________________________________________49 6_13_2_1 TMS serial link______________________________________________________49 6_13_2_2 TMS center number _________________________________________________50 6_13_3 External modem TMS network ___________________________________________50 6_13_3_1 TMS type __________________________________________________________50 6_13_3_2 TMS serial link______________________________________________________50 6_13_3_3 TMS PAD number ___________________________________________________51 6_13_3_4 TMS center number _________________________________________________51 6_13_4 Internal GSM TMS network ______________________________________________51 6_13_4_1 TMS type __________________________________________________________51 6_13_4_2 TMS PAD number ___________________________________________________52 6_13_4_3 TMS center number _________________________________________________52 6_13_5 IP/GPRS TMS network _________________________________________________52 6_13_5_1 TMS type __________________________________________________________52 6_13_5_2 SSL activation ______________________________________________________53 6_13_5_3 Address ___________________________________________________________53 6_13_5_4 Port ______________________________________________________________54 4/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted 6_13_5_5 APN______________________________________________________________55 6_13_5_6 Login _____________________________________________________________55 6_13_5_7 Password _________________________________________________________55 6_13_6 IP EXT TMS network___________________________________________________56 6_13_7 IP/PSTN TMS network _________________________________________________56 6_13_7_1 Provider number ____________________________________________________56 6_13_7_2 SSL activation ______________________________________________________56 6_13_7_3 Address ___________________________________________________________57 6_13_7_4 Port ______________________________________________________________58 6_13_7_5 APN______________________________________________________________58 6_13_7_6 Login _____________________________________________________________59 6_13_7_7 Password _________________________________________________________59 6_13_8 IP/ETH TMS network __________________________________________________59 6_13_8_1 SSL activation ______________________________________________________59 6_13_8_2 Address ___________________________________________________________60 6_13_8_3 Port ______________________________________________________________61 6_13_9 Common TMS ________________________________________________________61 6_13_9_1 TMS identifier ______________________________________________________61 6_13_9_2 Download protection _________________________________________________62 6_14 Initialization of PCI v4 Time Slot ________________________________________ 63 6_14_1 Time slot activation ____________________________________________________63 6_14_2 Time slot minimum ____________________________________________________63 6_14_3 Time slot maximum ____________________________________________________64 6_15 Exit “Parameters Initialization” _________________________________________ 64 7 Initialization menu functions ______________________________ 65 7_1 Initialization of SIM code _______________________________________________ 65 7_2 Initialization of PUK code ______________________________________________ 65 7_3 Restoration of default configuration ______________________________________ 65 7_4 Initialization of idle screen ______________________________________________ 66 7_5 Initialization of protection manager password _______________________________ 66 7_6 Status bar __________________________________________________________ 67 7_6_1 Display of the status bar _________________________________________________67 7_6_2 Status bar examples ____________________________________________________68 7_6_3 Current application _____________________________________________________68 5/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted 7_6_4 Date ________________________________________________________________68 7_6_5 Time ________________________________________________________________69 7_6_6 Battery level __________________________________________________________69 7_6_7 Main power connection __________________________________________________70 7_6_8 Landline network connection ______________________________________________70 7_6_9 Ethernet network connection ______________________________________________70 7_6_10 Bluetooth connection___________________________________________________71 7_6_11 GPRS network connection ______________________________________________72 7_6_12 Wi-Fi connection ______________________________________________________72 7_6_13 Contactless Connection ________________________________________________73 7_6_14 PKI level ____________________________________________________________73 7_7 Footer _____________________________________________________________ 74 7_8 Buzzer _____________________________________________________________ 74 7_9 Buzzer on pincode ____________________________________________________ 74 7_10 IPP 3XX Pinpad emulation mode _______________________________________ 75 8 Access to manager functions _____________________________ 76 8_1 Lookup functions _____________________________________________________ 77 8_1_1 State ________________________________________________________________78 8_1_2 Transaction ___________________________________________________________78 8_1_3 Calls ________________________________________________________________78 8_1_4 Software and hardware configurations ______________________________________78 8_1_4_1 Lookup hardware configuration __________________________________________78 8_1_4_2 Lookup Software Configuration __________________________________________79 8_2 Upgrade function _____________________________________________________ 80 8_2_1 Upgrade by load menu __________________________________________________80 8_2_1_1 Upgrade by load menu through external support ____________________________81 8_2_2 Upgrade by download menu ______________________________________________83 8_3 Diagnostic function ___________________________________________________ 83 8_3_1 Local diagnostic _______________________________________________________84 8_3_2 Erase diagnostic _______________________________________________________84 8_4 Delete software ______________________________________________________ 84 8_5 Modify configuration __________________________________________________ 85 8_6 License management _________________________________________________ 86 6/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted 8_6_1 Consult licences _______________________________________________________86 8_6_2 Add licenses __________________________________________________________87 9 Hardware configuration __________________________________ 88 9_1 Configuration of modem _______________________________________________ 89 9_1_1 Transmit level _________________________________________________________91 9_1_2 Line type _____________________________________________________________91 9_1_3 Reduced speed ________________________________________________________91 9_1_4 Print_________________________________________________________________91 9_1_5 Save ________________________________________________________________92 9_1_6 Reload configuration ____________________________________________________92 9_1_7 Default configuration ____________________________________________________92 9_1_8 Exit _________________________________________________________________92 9_1_9 Limitation of current_____________________________________________________93 9_1_10 Automatic fallback function ______________________________________________93 9_1_10_1 Number of days _____________________________________________________93 9_1_10_2 Number of failures ___________________________________________________94 9_1_10_3 Depth ____________________________________________________________94 9_2 ETHERNET Configuration______________________________________________ 94 9_2_1 Boot protocol __________________________________________________________98 9_2_2 IP address ____________________________________________________________99 9_2_3 Network mask _________________________________________________________99 9_2_4 Gateway _____________________________________________________________99 9_2_5 DNS1 ______________________________________________________________100 9_2_6 DNS2 ______________________________________________________________100 9_2_7 Rate _______________________________________________________________100 9_2_8 Ping ________________________________________________________________100 9_2_9 Print________________________________________________________________101 9_2_10 Save ______________________________________________________________101 9_2_11 Exit _______________________________________________________________101 9_2_12 Configuration reload __________________________________________________102 9_2_13 Configuration Reset __________________________________________________102 9_3 Standby setup ______________________________________________________ 102 9_3_1 Standby type _________________________________________________________102 9_3_2 Standby delay ________________________________________________________102 9_4 Energy save________________________________________________________ 103 9_4_1 Backlight ____________________________________________________________103 7/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted 9_4_2 Standby _____________________________________________________________103 9_5 Battery Setup _______________________________________________________ 104 9_5_1 Battery change _______________________________________________________105 9_5_2 Tilt _________________________________________________________________105 9_5_3 USB Charge _________________________________________________________105 9_5_4 Time before standby ___________________________________________________106 9_5_5 Standby on cradle _____________________________________________________106 9_5_6 ECO mode __________________________________________________________106 9_6 Bluetooth Configuration _______________________________________________ 106 9_6_1 Association __________________________________________________________107 9_6_1_1 New base _________________________________________________________107 9_6_1_2 Select Base ________________________________________________________109 9_6_1_3 Remove Base ______________________________________________________109 9_6_1_4 Print Base _________________________________________________________109 9_6_2 Advanced functions ____________________________________________________110 9_6_2_1 Modem ___________________________________________________________111 9_6_2_2 COM0 ____________________________________________________________111 9_6_2_3 COMU ____________________________________________________________112 9_6_2_4 COM1 ____________________________________________________________112 9_6_2_5 COMN ____________________________________________________________113 9_6_2_6 COMH ____________________________________________________________113 9_6_2_7 Change base name __________________________________________________113 9_6_2_8 Print______________________________________________________________114 9_6_2_9 Clear Secret _______________________________________________________114 9_6_3 Base state ___________________________________________________________114 9_7 Base update _______________________________________________________ 115 9_8 Wi-Fi configuration __________________________________________________ 115 9_8_1 New Profile __________________________________________________________117 9_8_1_1 Automatic search ___________________________________________________117 9_8_1_2 Manual entry _______________________________________________________118 9_8_1_3 Security ___________________________________________________________118 9_8_1_4 Report ____________________________________________________________119 9_8_2 Enterprise Security ____________________________________________________119 9_8_2_1 EAP Method _______________________________________________________119 9_8_2_2 WPA_EAP TLS _____________________________________________________119 9_8_2_3 WPA_EAP TTLS ____________________________________________________121 9_8_2_4 WPA_EAP PEAP ___________________________________________________123 9_8_2_5 WPA_EAP SIM _____________________________________________________125 8/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted 9_8_3 Home Security _______________________________________________________125 9_8_3_1 WEP64 ___________________________________________________________126 9_8_3_2 WEP128 __________________________________________________________126 9_8_3_3 WPA/WPA2 ________________________________________________________127 9_8_4 Active Profile _________________________________________________________127 9_8_5 Change Profile _______________________________________________________128 9_8_5_1 Profile ____________________________________________________________128 9_8_5_2 Security ___________________________________________________________129 9_8_5_3 Authentication ______________________________________________________129 9_8_5_4 Report ____________________________________________________________129 9_8_6 Delete Profile ________________________________________________________130 9_8_7 IP configuration _______________________________________________________130 9_8_7_1 Boot Protocol ______________________________________________________131 9_8_7_2 IP address _________________________________________________________132 9_8_7_3 Network mask ______________________________________________________132 9_8_7_4 Gateway __________________________________________________________132 9_8_7_5 DNS1 ____________________________________________________________133 9_8_7_6 DNS2 ____________________________________________________________133 9_8_7_7 Print______________________________________________________________133 9_8_7_8 Ping ______________________________________________________________134 9_8_7_9 Reset Conf ________________________________________________________134 9_8_8 General setting _______________________________________________________134 9_8_8_1 Radio ON/OFF _____________________________________________________134 9_8_8_2 DFS ON/OFF ______________________________________________________135 9_9 Configuration of screen _______________________________________________ 135 9_9_1 Backlighting__________________________________________________________136 9_9_2 Backlight duration _____________________________________________________136 9_9_3 Colors ______________________________________________________________136 9_10 Proxy ____________________________________________________________ 137 9_10_1 SOCKS4 protocol ____________________________________________________138 9_10_2 SOCKS5 protocol ____________________________________________________138 9_11 Bluetooth Audio ____________________________________________________ 139 9_11_1 Activation __________________________________________________________140 9_11_2 Deactivation ________________________________________________________140 9_11_3 Information _________________________________________________________141 9_11_4 Peripheral research ___________________________________________________141 9_11_5 Pincode ____________________________________________________________142 9_12 Bluetooth _________________________________________________________ 142 9/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted 9_12_1 Enable/Disable ______________________________________________________143 9_12_2 Pair with phone ______________________________________________________144 9_12_3 Add device _________________________________________________________148 9_12_4 Paired devices ______________________________________________________149 9_12_5 Advanced options ____________________________________________________152 9_12_5_1 Rename _________________________________________________________152 9_12_5_2 Pairing mode ______________________________________________________152 9_12_5_3 Power saving _____________________________________________________153 9_12_5_4 Smart Connection __________________________________________________153 9_12_5_4_1 Enable/Disable __________________________________________________154 9_12_5_4_2 Max interval _____________________________________________________154 9_12_5_4_3 Timeout ________________________________________________________155 9_13 Stylus ___________________________________________________________ 156 10 Home screen ________________________________________ 157 10_1 Activation_________________________________________________________ 157 10_2 Format ___________________________________________________________ 158 10_3 Header __________________________________________________________ 160 10_4 Time-out _________________________________________________________ 160 10_5 Applications _______________________________________________________ 160 11 Appendix____________________________________________ 161 11_1 List of shortcuts for TELIUM MANAGER functions ________________________ 161 11_2 List of the gateway numbers __________________________________________ 163 11_3 Call tree of Tellium Manager __________________________________________ 164 10/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 1 Information relative to document 1_1 Change History Revision 1 1.1 1.2 1.3 1.4 1.5 Change Written by Update based on document ICO-PE-285-GU-EN-V2 => ENNOV Compliant with Telium Manager 78xx Compliant with Telium Manager 80xx Evolutions in Wi-Fi Setup 9_8 Compliant with Telium Manager 82xx Precisions in Header description / LED Compliant with Telium Manager 84xx Precisions in Wi-Fi Setup 9_8 (Warning) Compliant with Telium Manager 84xx Evolutions in Bluetooth menu 9_12 Compliant with Telium Manager 84xx Evolutions in Bluetooth menu 9_12 Date 08/20/2013 09/13/2013 01/14/2014 06/11/2014 09/04/2014 01/12/2015 1_2 Validation Name Function Signature Date Checked by FORIEL L Telium Manager Developper 01/12/2015 Checked by ROUXEL A Telium Manager & schemes Team Leader 01/12/2015 Checked by FRIMOUR JL Software Platform Architect 01/12/2015 Approved by BARTHELEMY C Software Manager 01/12/2015 Platform Product 1_3 Objective This document describes the procedure: To configure a terminal, To look up the various states of a terminal, To update a terminal, To diagnose problems on a terminal. 11/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted 2 Function of applications manager The Applications manager is called "Telium manager". The applications manager is a software package loaded into the terminal either using a local loading tool (LLT) or by remote downloading (Ingestate or TMS). The primary purpose of the applications manager is to activate various functions of the software used in the terminal. In this respect, several softwares can be loaded into a terminal, independently of each other. The softwares are “tight” with respect to each other: they securely execute their own resources. After a loading operation or after switching on the terminal, the operating system launches the applications manager. The applications manager of the terminal then ensures the following functions: to prompt the operator to initialize his terminal, or an application, if necessary; to supervise the input of an amount and the passage of a card; then, to request the concerned application to execute the debit, credit or cancellation operation; to monitor the F (function) key to detect the other transactions or operations requested by the operator, after which it requests execution by the concerned application (modification of initialization parameters, lookup of transactions file or state of all applications, program upgrade…); to request installed applications to execute their periodic tasks (remote collection …). The applications manager of the terminal accepts the French Banking and Non-Banking, French Health system and Export applications. 12/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 3 General information 3_1 Display Tellium Manager adapts a set of information taking into account different parameters: Display resolutions, Display modes: Black and white, Color (LibGr), Advanced color (GOAL), Display orientation (portrait / landscape autodetection – tilt), In addition, the GOAL mode manages the touch screen capability. Examples of menu selection screen: Black and White Terminal Color Terminal, LibGr Mode Color Terminal, GOAL Mode Examples of data selection screen: Black and White Terminal Color Terminal, LibGr Mode Color Terminal, GOAL Mode In this document, screen shots are from an ICT250 terminal (GOAL mode on the left side, LibGr mode on the right side) except for some specific items for which the terminal type is precised. 3_2 Display area Depending on the type of terminal and the display mode, some screens are divided into 4 parts: leds, status bar, selection area and function area. Except for the color, the selection area is strictly the same for the Black and White and Color displays. 13/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 For example, for the Color mode on an ICT250 terminal: Restricted Software LEDs Status bar (cf. chapter 7_6 ) Selection area Function area 3_3 Keypad The keypad type depends on the terminal. Terminals equipped with a man-machine interface have, at the least, the following keys: one green validation key O ; one red cancellation key X ; one yellow correction key < ; ten digital keys (from 0 to 9 ); one decimal dot key . ; one function key F ; four function keys F1 , F2 , F3 , F4 , which can be screen-printed depending on the terminal type. Some terminals have other keys. Refer to the terminal user manual for more information. 3_4 Function area The function area is located at the bottom, at the right or at the left of the terminal screen, depending on the position of the context-sensitive keys. This area describes the functionality associated to each of the function keys. The function area depends on the terminal type and on the running application. Hereafter are the default footers of some terminals: iWL250 and iCT250 which have a sufficient keypad. iWL280 which do not have function keys on its keypad. 14/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted iWL350 which have a minimal keypad (only F , X , < , O keys). 3_5 Terminal screens This section describes the various types of screen, taking account of the user area. On terminals equipped with touch screens, a function can be selected by pressing on the screen. Color Terminal, GOAL interface: When the terminal is on the home screen (initialized terminal), you must press F to access this screen. This screen lists the applications loaded into the terminal (including Telium Manager). Only the Telium Manager application is described in this manual. The other applications are not described here. With the GOAL interface, the application is represented by an icon. each You can move between the applications using the up and down keys. Color Terminal, LibGR inteface: Telium Manager or another installed application can be selected by pressing O or the context-sensitive "Validate" key with the GOAL interface. With the “LibGR” interface, each application is represented by a number which appears before its name. You can select an application by pressing on the key corresponding to this number (0 for Telium Manager). X is used to return to the startup screen. 15/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted 4 Condition of terminal at power-up When the terminal is switched on, the message displayed depends on the following factors: No operating system SCREEN “:(“ “ :-) “ MEANING The terminal operating system has not been loaded. The terminal is not activated (symbol). The unit must be sent to the maintenance shop. The terminal operating system has not been loaded. The terminal is activated (symbol). The unit must be sent to the maintenance shop. Applications manager present or not SCREEN The terminal applications manager has not been loaded. Load the applications manager. The procedure is given in the loading manual. LLT MEANING Applications manager initialization status Terminal is in standby for applications manager initialization. Select the language as detailed in the “Applications manager initialization” section of this manual. Several languages may appear on the screen depending on the configuration loaded. 16/166 No software Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted The applications manager is initialized but no application is present. Load or download an application. The procedure is given in the terminal loading manual. Presence of a software The terminal applications manager is initialized but none of the applications present are initialized. Press the function key F and select the application to be initialized. Refer to the reference manual of the selected procedure for the initialization procedure. No security component on terminal configured for health system The terminal is initialized but the security software (HEALTH) is not present: load the software. 17/166 Initialization status of at least one application. Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted Idle Screen The terminal Applications manager is initialized and at least one application is initialized. The terminal is operational with the initialized application(s). One of these applications manages the idle screen of the terminal. Amount screen The terminal Applications manager is initialized and at least one application is initialized. The terminal is operational with the initialized application(s). The idle screen of the terminal is managed by the applications manager. 18/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted 5 Preparatory information for initialization 5_1 Storage of parameters entered For the first initialization, the parameters are stored only if all parameters required by the initialization have been covered. This does not apply to the date and time which are stored. Following this, all the values entered during an initialization procedure are stored as soon as they are validated. 5_2 Drop data entry in progress On each screen displayed during the initialization procedure, the operator can abort the current data entry by pressing the red (abort) key. In this case, the terminal will return to the screen displayed prior to the initialization request. 5_3 Parameters forming initialization For the first initialization, all of the parameters forming the manager initialization are displayed successively and must be entered. For the following initializations, and depending on the application software configuration (CB, health, export…), some parameters are masked by the applications. Some parameters can disappear from the menus if the terminal considers that they are no longer updatable. 5_4 Access to parameters by a shortcut Each parameter of the manager can be accessed by a key sequence which is activated by pressing the function key F , followed by the dot key . , followed by a number. The list of these shortcuts can be printed out by typing the sequence “F.0” on a terminal having a printer, and is also available in appendix. 19/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL 6 Initialization of “applications manager” parameters From the idle screen, press the function key F . Then select the 20/166 icon or the “Telium Manager” item and validate (shortcut: F.48). Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Item Reference Consultation 8_1 Lookup functions Evolution 8_2 Upgrade function Initialization Below Diagnosis 8_3 Diagnostic function Deletion 8_4 Delete software Modification 8_5 Modify configuration License 8_6 License management icon or the “Initialization” item and validate. Select the For other items; refer to the following table. Item Reference SIM Code 7_1 Initialization of SIM code PUK Code 7_2 Initialization of PUK code Default Conf. 7_3 Restoration of default configuration Screen Saver 7_4 Initialization of idle screen Password 7_5 Initialization of protection manager password 21/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Header 7_6 Status bar Footer 7_7 Footer Beep On Key 7_8 Buzzer Beep On Pincode 7_9 Buzzer on pincode PINPAD Emulation 7_10 IPP 3XX Pinpad emulation mode Hardware 9 Hardware configuration Then select the icon or the “Parameters” item and validate. Each icon or item corresponds to a parameter of the manager: Item Reference Language 6_1 Initialization of language Date and time 6_2 Initialization of date and time Terminal Number 6_3 Setting the terminal number Currency 6_4 Initialization of currency Switchboard 6_5 Initialization of switchboard Pinpad 6_6 Initialization of PINPAD Contactless 6_7 Initialization of the contactless function Stripe Reader 6_8 Initialization of magnetic strip reader Serial Number 6_9 Display of Serial Number Network Type 6_10 Initialization of the network Fallback Network 6_11 Initialization of fallback network Cash Connection 6_12 Initialization of cash register connection TMS Network 6_13 Initialization of TMS network PCI V4 Time Slot 6_14 Initialization of PCI v4 Time Slot “Red key” 6_15 Exit “Parameters Initialization” 22/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted ICO-OPE-00986 REFERENCE MANUAL Restricted 6_1 Initialization of language Shortcut: F.13 From the “Parameters Initialization” screen, select the icon or the “Language” item and validate. The list of languages depends on the loaded configuration. Select the desired language. 6_2 Initialization of date and time Shortcut: F.12 From the “Parameters Initialization” screen, select the validate. icon or the “Date and Time” item and Choose the type of setting to be performed. 23/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 6_2_1 Setting the date Enter the date in accordance with the date format then validate. A validity check is performed. 6_2_2 Setting the time Enter the time then validate. A validity check is performed. In “GOAL” mode and AM/PM format, user also has to select either “AM” or “PM”. 6_2_3 Setting the date format Choose the desired format (Standard, US, Chinese and German) then validate. 6_2_4 Setting the time format In this version of documentation, this item is only described in “GOAL” mode. Other mode will be documented in future documentation. 24/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted Select the display format of the time. Then validate. 6_3 Setting the terminal number Shortcut: F.14 From the “Initialization” screen, select the icon or the “Terminal Number” item and validate. Enter the terminal number (three digits required) then validate. 6_4 Initialization of currency Shortcut: F.15 From the “Initialization” screen, select the icon or the “Currency” item and validate. Select the default currency to be displayed on the amount screen of the terminal. Then validate. 25/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted 6_5 Initialization of switchboard Shortcut: F.16 From the “Initialization” screen, select the icon or the “Switchboard” item and validate. This menu is used to adapt the terminal to the phone line on which it is connected by defining the following parameters: presence (or absence) of private switchboard between the terminal and the phone line, DTMF or pulse dialing, Other parameters like tone detection, various hold… 6_5_1 Switchboard configured with “Yes” Choose the dialing mode before the private switchboard: either DTMF (voice frequency dialing) or pulse (decimal dialing). 26/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted Enter the number (1 to 13 alphanumeric characters) to use to connect the terminal to the public network through the private switchboard. Choose the dialing mode after the private switchboard: either DTMF (voice frequency dialing) or pulse (decimal dialing). 6_5_2 Switchboard configured with “Alpha” Enter up to fifteen characters. Press “F1” key for help. 6_6 Initialization of PINPAD Shortcut: F.17 From the “Parameters Initialization” screen, select the 27/166 icon or the “Pinpad” item and validate. Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Select in the list either: “None” to inhibit the pinpad or because there is no pinpad, or “Yes” to select manually the pinpad, or “Autodetect” to let the terminal select the pinpad 6_6_1 Initialization of pinpad type 28/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Restricted Choose the type of the PINPAD in the proposed list. After validation, terminal may propose to configure it (refer 6_6_3 Initialization of the stripe reader on a P30 pinpad and 6_6_4 Initialization of the background color of a IPP250 pinpad). 6_6_2 Pinpad auto detect The terminal detects the pinpad type. After validation, terminal may propose to configure it (refer 6_6_3 Initialization of the stripe reader on a P30 pinpad and 6_6_4 Initialization of the background color of a IPP250 pinpad). 6_6_3 Initialization of the stripe reader on a P30 pinpad Configure the type of the stripe reader on the pinpad. This screen appears only if the terminal offers fewer reading possibilities than the pinpad. 6_6_4 Initialization of the background color of a IPP250 pinpad 29/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted Select the desired color using the navigation keys. Only with “LibGR”, press the “F” key then use the navigation keys to refine the color. 6_7 Initialization of the contactless function Shortcut: F.41 From the “Parameters Initialization” screen, select the icon or the “Contactless” item and validate. The contactless function is activated by selecting the “Yes” option. 30/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted Select the type of the target connected to the terminal. The “Internal” option means that the contactless function is integrated into the terminal. 6_8 Initialization of magnetic strip reader Shortcut: F.18 From the “Initialization” screen, select the icon or the “Stripe Reader” item and validate. Select the tracks to read on the magnetic strip of a card. Then validate. 6_9 Display of Serial Number Shortcut: F.19 From the “Initialization” screen, select the icon or the “Serial Number” item and validate. By default, the displayed number is the production serial number. Caution: This parameter can not be entered (factory data). 31/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted 6_10 Initialization of the network access Shortcut: F.20 From the “Initialization” screen, select the icon or the “Network Type” item and validate. Select the network access to be used for transfert of the application data streams (not for download). Depending on the terminal type, some options are not available. Item Reference PSTN 6_10_1 PSTN network ISDN 6_10_2 ISDN network Ext. Modem 6_10_3 External modem network Ext. GSM 6_10_4 External GSM network Int. GSM 6_10_5 Internal GSM network GPRS 6_10_6 GPRS network IP EXT 6_10_7 IP EXT network 32/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 6_10_1 PSTN network 6_10_1_1 PSTN type Select one of the two possibilities: X25 – access to Transpac servers via internal modem and PAD. If selected, the configuration of the network is finished. IP/Eth – access to Transpac servers via IP/X25 gateway. 6_10_1_2 Gateway for IP/ETH access Enter the gateway number (refer 11_2 List of the gateway numbers). 6_10_1_3 SSL for IP/ETH access Activate SSL if the gateway number is odd. 33/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 If SSL is activated, select a SSL profile in the list. 6_10_1_4 IP address Enter the IP address. IP Address is composed of four digital fields, each one from 0 to 255. 6_10_1_5 port Enter the port number (up to ten digits). Then refer to 6_11 Initialization of fallback network. 34/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 6_10_2 ISDN network The list depends on the hardware configuration. Select the command mode. Then refer to 6_11 Initialization of fallback network. 6_10_3 External modem network The list depends on the hardware configuration. 35/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Restricted 6_10_4 External GSM network The list depends on the hardware configuration. 6_10_5 Internal GSM network The list depends on the hardware configuration. This screen is not available for the GSM terminal. Select if the GSM module shall be activated at start-up or not (available only for export configurations). 36/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 6_10_5_1 V32bis PAD To force GSM communication via a V32bis PAD number (other than that configured by bank server). Enter the PAD number (displayed only if you select “Enable” on previous screen). 6_10_5_2 V32bis prefixed Define a fixed dialing prefix for electronic banking communications from abroad. 37/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted Enter the prefix number as "0033" to reach a server in France (displayed only if you select “Enable” on previous screen). 6_10_5_3 Connection type on base Select the type of electronic banking communications when the terminal is on its base. 6_10_5_4 Display in the status bar Select the name to display in the status bar: either the access provider (MVNO) or the operator. 38/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 6_10_6 GPRS network 6_10_6_1 Serial link The list depends on the hardware configuration. This screen is not available for the GPRS terminal. 6_10_6_2 APN Enter the APN then validate. 6_10_6_3 Login Enter the login then validate. 39/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 6_10_6_4 Password Enter the password then validate. 6_10_6_5 Gateway Enter a gateway number (refer 11_2 List of the gateway numbers). 6_10_6_6 SSL Activate SSL if the gateway number is odd. 40/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 If SSL is activated, select a SSL profile in the list. 6_10_6_7 IP address Enter the IP address. IP Address is composed of four digital fields, each one from 0 to 255. 6_10_6_8 Port Enter the port number (up to ten digits). 6_10_6_9 GPRS module startup 41/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted ICO-OPE-00986 REFERENCE MANUAL Restricted Select if the GPRS module shall be activated at start-up or not (available only for export configurations). 6_10_6_10 Connection type on base Select the type of electronic banking communications when the terminal is on its base. 6_10_6_11 Display in the status bar Select the name to display in the status bar: either the access provider (MVNO) or the operator. Then refer to 6_11 Initialization of fallback network. 42/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 6_10_7 IP EXT network 6_10_7_1 Gateway Enter a gateway number (refer 11_2 List of the gateway numbers). 6_10_7_2 SSL Activate SSL if the gateway number is odd. If SSL is activated, select a SSL profile in the list. 43/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 6_10_7_3 IP address Enter the IP address (four digital fields, each one from 0 to 255). 6_10_7_4 Port Enter the port number (up to ten digits). Then refer to 6_11 Initialization of fallback network. 6_11 Initialization of fallback network The following screen is displayed subsequently to the network configuration selecting either: PSTN with IP/Eth access, or ISDN, or GPRS, or IP EXT 44/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Restricted Select a fallback network in case of communication failure of the main network. Main network Depending on the terminal type and on the main network, some options are not available. The following table describes all possible associations: No PSTN ISDN Ext. GSM Int. GSM GPRS IP EXT PSTN X X X X X X X ISDN X X X X X X Ext. Modem Ext. GSM Int. GSM GPRS X X X X X X X IP EXT X X X X X X X For the configuration of a fallback network, refer to its equivalent in the main network: Item Reference PSTN 6_10_1 PSTN network ISDN 6_10_2 ISDN network Ext. Modem 6_10_3 External modem network Ext. GSM 6_10_5 Internal GSM network Int. GSM 6_10_6 GPRS network GPRS 6_10_7 IP EXT network IP EXT 6_10_1 PSTN network 45/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted 6_12 Initialization of cash register connection Shortcut: F.21 From the “Initialization” screen, select the icon or the “Cash register” item and validate. 6_12_1 Activation of the cash register connection Declare (or not) the connection to a computer system. Activate only if there is an effective connection to a computer system, in particular in the “health” system context. Following screens are for “health” system context only. 6_12_2 Initialization of the cash register connection Enter the reader number (two digits – usually "02", “01” being reserved to the workstation). The list depends on the hardware configuration. 46/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Select the dialog speed on the serial link. 6_13 Initialization of TMS network Shortcut: F.22 From the “Initialization” screen, select the icon or the “TMS” item and validate. Access to the TMS menu may be protected by password. 47/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 The list depends on the hardware configuration. Item Reference Modem 6_13_1 Internal modem TMS network ISDN 6_13_2 ISDN TMS network Ext. Modem 6_13_3 External modem TMS network Int. GSM 6_13_4 Internal GSM IP/GPRS 6_13_5 IP/GPRS TMS network IP EXT 6_13_6 IP EXT TMS network IP/PSTN 6_13_7 IP/PSTN TMS network IP/Eth 6_13_8 IP/ETH TMS network 6_13_1 Internal modem TMS network 6_13_1_1 TMS type The X25 access provides access to Transpac servers by internal modem and PAD. 48/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Restricted 6_13_1_2 TMS PAD number If “PSTN” was selected, enter the TMS phone number (up to 15 digits). After validation, refer to 6_13_9 Common TMS. If “X25” was selected, enter the PAD number. 6_13_1_3 TMS center number For “X25” only, enter the X25 subscriber number (TRANSPAC, up to 14 digits) to call. After validation, refer to 6_13_9 Common TMS. 6_13_2 ISDN TMS network 6_13_2_1 TMS serial link The list depends on the hardware configuration. 49/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 6_13_2_2 TMS center number Enter the X25 subscriber number (TRANSPAC, up to 14 digits) to call. After validation, refer to 6_13_9 Common TMS. 6_13_3 External modem TMS network 6_13_3_1 TMS type The X25 access provides access to Transpac servers by internal modem and PAD. 6_13_3_2 TMS serial link The list depends on the hardware configuration. 50/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 6_13_3_3 TMS PAD number If “PSTN” was selected, enter the TMS phone number (up to 15 digits). After validation, refer to 6_13_9 Common TMS. If “X25” was selected, enter the PAD number. 6_13_3_4 TMS center number For “X25” only, enter the X25 subscriber number (TRANSPAC, up to 14 digits) to call. After validation, refer to 6_13_9 Common TMS. 6_13_4 Internal GSM TMS network 6_13_4_1 TMS type The X25 access provides access to Transpac servers by internal modem and PAD. 51/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 6_13_4_2 TMS PAD number If “PSTN” was selected, enter the TMS phone number (up to 15 digits). After validation, refer to 6_13_9 Common TMS. If “X25” was selected, enter the PAD number. 6_13_4_3 TMS center number For “X25” only, enter the X25 subscriber number (TRANSPAC, up to 14 digits) to call. After validation, refer to 6_13_9 Common TMS. 6_13_5 IP/GPRS TMS network 6_13_5_1 TMS type The list depends on the hardware configuration. This screen is not available for the GPRS terminal. 52/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 6_13_5_2 SSL activation Activate SSL if necessary. Select a SSL profile in the list. This screen is displayed only if SSL was activated on previous screen. 6_13_5_3 Address Select the type of the address. 53/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 If “Domain Name” was selected, enter the domain name (alphanumeric field). If “IP Address” was selected, enter the IP address (four digital fields, each one from 0 to 255). 6_13_5_4 Port Enter the port number (up to ten digits). 54/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 6_13_5_5 APN Enter the APN then validate. 6_13_5_6 Login Enter the login then validate. 6_13_5_7 Password Enter the password. After validation, refer to 6_13_9 Common TMS. 55/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 6_13_6 IP EXT TMS network The list depends on the hardware configuration. Then refer to 6_13_9 Common TMS. 6_13_7 IP/PSTN TMS network 6_13_7_1 Provider number Enter the phone number of the Internet Access Provider (up to fifteen digits). 6_13_7_2 SSL activation Activate SSL if necessary. 56/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Restricted Select a SSL profile in the list. This screen is displayed only if SSL was activated on previous screen. 6_13_7_3 Address Select the type of the address. If “Domain Name” was selected, enter the domain name (alphanumeric field). 57/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 If “IP Address” was selected, enter the IP address (four digital fields, each one from 0 to 255). 6_13_7_4 Port Enter the port number (up to ten digits). 6_13_7_5 APN Enter the APN then validate. 58/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 6_13_7_6 Login Enter the login then validate. 6_13_7_7 Password Enter the password. After validation, refer to 6_13_9 Common TMS. 6_13_8 IP/ETH TMS network 6_13_8_1 SSL activation Activate SSL if necessary. 59/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Restricted Select a SSL profile in the list. This screen is displayed only if SSL was activated on previous screen. 6_13_8_2 Address Select the type of the address. If “Domain Name” was selected, enter the domain name (alphanumeric field). 60/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 If “IP Address” was selected, enter the IP address (four digital fields, each one from 0 to 255). 6_13_8_3 Port Enter the port number (up to ten digits). After validation, refer to 6_13_9 Common TMS. 6_13_9 Common TMS 6_13_9_1 TMS identifier Enter the recognition code (up to nine digits) authorizing terminal to connect to TMS. 61/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted ICO-OPE-00986 REFERENCE MANUAL 6_13_9_2 Download protection Select if downloading is protected or not. If downloading is protected, enter the downloading code: After validation, the following screen appears. 62/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Restricted 6_14 Initialization of PCI v4 Time Slot The PCI v4 Time Slot menu is only present for PCI v4 terminal. When the terminal is PCI v4, it reset every 24h and the specific message “MANDATORY SECURITY CHECK IN PROGRESSS” appears on start. The terminal will reset during the time slot indicates or by default betwwen 04:00AM and 05:00AM. 6_14_1 Time slot activation It’s possible to activate or desactive the time slot. By default, the time slot is activated. 6_14_2 Time slot minimum Set the time slot mimum for 24h reset. By default, the time slot minimum is 04:00 AM 63/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 6_14_3 Time slot maximum Set the time slot maximum for 24h reset By default, the time slot maximum is 05:00 AM 6_15 Exit “Parameters Initialization” Press the red key X to exit the “parameters initialization” screen and go back to the idle screen. The terminal proposes to print the parameters: Red key X to exit without printing, Green key O to print the parameters (shortcut F.43) and exit. 64/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 7 Initialization menu functions From the idle screen, press the function key F . Then select the icon or the “Telium Manager” item and validate. Finally, select the icon or the “Initialization” item and validate. For screen examples, refer to 6 Initialization of “applications manager” parameters. 7_1 Initialization of SIM code Shortcut: F.23 From the “Initialization” screen, select the present only on GPRS terminals. icon or the “SIM Code” item and validate. This item is Enter the PIN code of the SIM. Then validate. 7_2 Initialization of PUK code Shortcut: F.54 From the “Initialization” screen, select the “PUK Code.” item and validate. This item is present only on GPRS terminals and the SIM card requires the PUK code. Enter the PUK code. Then validate. 7_3 Restoration of default configuration Shortcut: F.24 From the “Initialization” screen, select the icon or the “Default Conf.” item and validate. This item is present only if the terminal has been initialized at least once using the “manager.par” file. 65/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted Confirm the restoration of parameters from the “manager.par” file. 7_4 Initialization of idle screen Shortcut: F.25 From the “Initialization” screen, select the is present only on mobile terminals. icon or the “Screen saver” item and validate. This item Idle screen is composed of two alphanumeric lines. Enter the message to be displayed on each line. 7_5 Initialization of protection manager password Shortcut: F.26 From the “Initialization” screen, select the 66/166 icon or the “Password” item and validate. Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted This screen is displayed when a password already exists. Enter the current password. Enter the new password. 7_6 Status bar 7_6_1 Display of the status bar From the “Initialization” screen, select the icon or the “Header” item and validate. Activate or disable the display of the status bar on the top of the screen. In the following chapter, each element (highlighted by a red rectangle) of the status bar is explained. 67/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 7_6_2 Status bar examples Fixed terminal Bluetooth mobile terminal linked to an external GPRS modem WI-FI mobile terminal linked to an external GPRS modem WI-FI & Bluetooth terminal – latest color header Terminal in AM/PM time mode WI-FI & Bluetooth terminal – latest black and white header 7_6_3 Current application The terminal displays the name of the application currently being executed. If the current application is the Manager, the area is empty. 7_6_4 Date The terminal displays its current date. The date is displayed in accordance with the format chosen at initialization (refer 6_2_3 Setting the date format). European format (DD/MM/YYYY) 68/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Anglo-Saxon format (MM/DD/YYYY) Asian format (YYYY/MM/DD) German format (DD.MM.YYYY) 7_6_5 Time The terminal displays its current time with the HH:MM format. The “:” blinks at 1Hz frequency. 7_6_6 Battery level The terminal displays the battery charge status. Depending on the battery charge level, one of the following icons is displayed: Battery charge greater than 80%, Battery charge greater than 60% and less than 80%, Battery charge greater than 40% and less than 60%, Battery charge greater than 20% and less than 40%, Battery charge greater than 10 % and less than 20%, Battery charge greater than 5% and less than 10%, blinking Battery charge less than 5%, 69/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 or Restricted Without battery (and connected to a power supply) When the terminal is charging and the charge status is not greater than 80%, the battery pictograms are displayed in sequence starting with the current charge status up to the pictogram of the 80% charge status to indicate that the battery is charging. For this example, the current charge is 30%: Or … … 7_6_7 Main power connection The following display indicates that the terminal is connected to a power supply. This symbol is also displayed when a mobile terminal is charging its battery because: The terminal is on its base which is connected to main power, or The terminal is connected to a battery charging system via an USB link (PC, HUB…, refer 9_5_3 USB Charge). 7_6_8 Landline network connection The following pictograms are displayed in the status bar to indicate the landline connection status (STN, ISDN, External modem). Depending on the landline (selected in 6_10 Initialization of the network access) and the connection status, one of the following icons is displayed: Terminal not connected. . Terminal connection to network in progress (dialing, for example) Terminal connected to Switched Telephone Network (STN). Terminal connected to telephone network via GSM. Terminal connected to ISDN network. Terminal connected to telephone network by External modem. 7_6_9 Ethernet network connection 70/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted The following icons indicate the Ethernet link status of the terminal: No icon No Ethernet capability; Ethernet capable but link not connected (“Eth” for black and white screen); Ethernet link connected but IP address not negociated (DHCP mode); Operational Ethernet connection (“ETH” for black and white screen). This Ethernet link is either: internal to the reader (EFT30Smart, ICT2XX , …), or acquired via an Ethernet Bluetooth base, or acquired via Wi-Fi (internal asEFT930W or Wi-Fi dongle connected to the terminal). 7_6_10 Bluetooth connection The terminal displays the status of the Bluetooth connection. The Bluetooth connection is represented by four elements: The connection status: 71/166 Bluetooth module starting up, or Terminal associated to at least one base, but no base is replying, or Terminal connected to at least one base or one Bluetooth device. The serial number of a base connected to the terminal: The terminal is connected to at least one base. The reception level of Bluetooth signal (only for bases): Maximum reception level (100%) High reception level (75%) Medium reception level (50%) Low reception level (25%) Very low reception level (<5%) The association status: Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted Terminal associated to a smart base. The pictogram can appear on a non-Bluetooth terminal if it is associated to a base. If the terminal is associated to several bases, the serial numbers are displayed alternately every 5 s with the reception level corresponding to the base. For iOs devices, there is an other information on iSMP and iCMP’s header: Device is present Device is authentificated Device is connected 7_6_11 GPRS network connection The terminal displays the status of the GPRS connection The GPRS network connection is represented by three elements: GPRS connection status: No GPRS module; GPRS module not started; GPRS module attached to network; GPRS module connected to a server; Network name: Name of network or virtual operator (refer 6_10_6 GPRS network), SIM card is absent, SIM Code to be initialized (refer 7_1 Initialization of SIM code), Incorrect SIM Code (refer 7_1 Initialization of SIM code), SIM card locked (3 incorrect codes). To unlock the SIM card, use a mobile phone and enter the PUK code. Reception level of GPRS signal: Maximum reception level (100%) High reception level (75%) Medium reception level (50%) Low reception level (25%) Very low reception level (<5%) 7_6_12 Wi-Fi connection 72/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted The terminal displays the Wi-Fi connection status. For configuration, refer 9_8 Wi-Fi configuration. The Wi-Fi connection is represented by three elements: Wi-Fi connection status: No Wi-Fi module; Wi-Fi module not started; Wi-Fi module attached to network; Network name: Name of network (ESSID) if attached to network; Reception level of Wi-Fi signal: Maximum reception level (100%); High reception level (75%); Medium reception level (50%); Low reception level (25%); Very low reception level (<5%). 7_6_13 Contactless Connection The terminal displays the Contactless connection status (only terminals with software LEDs). The contactless connection status is represented by a LED: BLACK No Contactless capability GRAY Contactless HW capable GRAY blinking Contactless HW & SW capable Contactless DLL and driver already loaded on terminal To use the contactless feature, the user has to activate the functionality through the manager menu GREEN Blinking Contactless HW & SW capable and READY. GREEN Static Contactless field turned ON, waiting the contactless card. 7_6_14 PKI level The terminal displays its PKI (Public Key Infrastructure) level. The PKI level is represented by a padlock: PKI level 1; 73/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted PKI level 3. 7_7 Footer From the “Initialization” screen, select the icon or the “Footer” item and validate. Activate or disable the display of the footer on the bottom of the screen. 7_8 Buzzer Shortcut: F.50 From the “Initialization” screen, select the icon or the “Beep On Key” item and validate. Select “Yes” to emit a sound when pressing a key. 7_9 Buzzer on pincode From the “Initialization” screen, select the item is present only on iWL350. 74/166 icon or the “Beep On Pincode” item and validate. This Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted Select “Yes” to emit a sound when entering a pincode. 7_10 IPP 3XX Pinpad emulation mode Shortcut: F.53 From the “Initialization” screen, select the icon or the “PINPAD Emulation” item and validate. This item is present only on IPP320 and IPP350 terminals. After validation, the terminal resets. Then it displays the icon once ready. 75/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL 8 Access to manager functions From the idle screen, press the function key F . Then select the 76/166 icon or the “Telium Manager” item and validate. Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Item Restricted Reference Consultation 8_1 Lookup functions Evolution 8_2 Upgrade function Initialization 6 Initialization of “applications manager” parameters Diagnosis 8_3 Diagnostic function Deletion 8_4 Delete software Modification 8_5 Modify configuration License 8_6 License management 8_1 Lookup functions From the “Telium Manager” screen, select the icon or the “Consultation” item and validate. This screen is to display (not to modify) many parameters and status: Item Reference State 8_1_1 State Transaction 8_1_2 Transaction Call 8_1_3 Calls Configuration 8_1_4 Software and hardware configurations 77/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted 8_1_1 State Shortcut: F.1 From the “Consultation” screen, select the icon or the “State” item and validate. Print the status of the applications. This item is available only on terminals equipped with a printer. 8_1_2 Transaction Shortcut: F.2 From the “Consultation” screen, select the icon or the “Transaction” item and validate. Print the log of the transactions. This item is available only on terminals equipped with a printer. 8_1_3 Calls Shortcut: F.3 From the “Consultation” screen, select the icon or the “Call” item and validate. “Planning of Call” is to print the schedule of coming automatic calls (as calls for downloading). “Batch Data Capture” is to force the remote collection of all applications. 8_1_4 Software and hardware configurations From the “Consultation” screen, select the icon or the “Configuration” item and validate. 8_1_4_1 Lookup hardware configuration Shortcut: F.4, F.39 (Pinpad), F.37 (TPASS) or F.58(Software infos) From the “Configuration” screen, select the 78/166 icon or the “Hardware” item and validate. Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted Select the hardware item to print out its ticket. The list depends on the peripherals connected to the terminal. For “Terminal”, refer to the following screens. By selecting “On Printer”, the full hardware configuration is printed. By selecting “On Display”, you have to select the subset of the hardware configuration to be displayed. 8_1_4_2 Lookup Software Configuration Shortcut: F.5, F.6, F.40 (Pinpad) or F.38 (Target) From the “Configuration” screen, select the icon or the “Software” item and validate. Select the viewing medium: either displayed on the screen (F.5) or printed (F.6). 79/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted Select the item to be viewed. The list depends on software configuration (drivers and libraries). 8_2 Upgrade function From the “Consultation” screen, select the icon or the “Evolution” item and validate. Select the way to upgrade the terminal. The list depends on the configuration and items can be: Local load (via PC or USB key), Download (TMS call), Parameters (TMS call), Remote download Pinpad (IPP3XX emulation mode – Shortcut: F.52), Remote download target IST (Shortcut: F.51). 8_2_1 Upgrade by load menu From the “Evolution” screen, select the 80/166 icon or the “Load” item and validate. Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted Select the resource to upgrade the terminal: Local (LLT, shortcut F.7), or External for USB key (shortcut F.8) or MMC (shortcut F.9). 8_2_1_1 Upgrade by load menu through external support Select the memory device. The terminal displays the tree structure of the memory device (USB key, MMC or SDCard).XXX or [XXX] indicate that the “XXX” item is a directory. 81/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Select the files to be loaded. Once selection is finished, launch the load. Confirm the download. The list of the files being loaded is displayed. Once finished, the terminal restarts. 82/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Restricted 8_2_2 Upgrade by download menu Shortcut: F.10 Enter the software ID to be downloaded or validate to download all of the softwares associated to the TMS identifier. 8_3 Diagnostic function From the “Telium Manager” screen, select the icon or the “Diagnosis” item and validate. Select between: Local – a diagnostic ticket is printed or sent to external printer via the COM0/USB link. Telediagnostic – no ticket is printed; the terminal transmits the information by calling the TMS whose access parameters have been specified in the initialization (shortcut: F.29). Clear – Erased the saved diagnostic. Diag to USB – diagnosis result is saved on the USB key. Diag to MMC – diagnosis result is saved on the MMC/SD card. PINPAD – this item is proposed if a Pin-Pad Reader has been activated (shortcut: F.44). TeliumPass diagnostic – this item is proposed if a TeliumPass is connected. 83/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 8_3_1 Local diagnostic Shortcut: F.27 and F.28 Select the type of diagnostic to print. The GPRS startup diagnostic is present only if the GPRS automatic startup parameter has been activated 8_3_2 Erase diagnostic Shortcut: F.30 Reset local diagnosis ticket. 8_4 Delete software Shortcut: F.42 From the “Telium Manager” screen, select the icon or the “Deletion” item and validate. If requested, enter the password to access the maintenance functions. 84/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted Enter the code to access the delete function. Select in the list the component to delete (use the “up” the “down” keys to scroll the list). Then validate. Confirm the deletion of the software component. 8_5 Modify configuration Shortcut: F.31 and F.32 From the “Telium Manager” screen, select the 85/166 icon or the “Modification” item and validate. Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted Used by application to force a call to the tele-configuration center subsequent to a hardware or software upgrade. 8_6 License management From the “Telium Manager” screen, select the icon or the “Licence” item and validate. This function is present when the licenses have been activated on the terminal (remote configuration or local load of an activation file). Lookup or Add a licence by calling the license server. 8_6_1 Consult licences Shortcut: F.33 The “Consultation” function gives a status of the licenses for each present application (provisional, in sleep mode, or operational). 86/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 8_6_2 Add licenses Shortcut: F.34 Select in the list the applications you want a licence (as part of the process, the license server is called with the created list): Scroll the list using the up and down arrow keys. Select/unselect an application using the yellow key (by default, all applications are unselected). Add licences of the selected application using the green key. Exit and drop the list using the red key. 87/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL 9 Hardware configuration From the idle screen, press the function key F . Then select the icon or the “Telium Manager” item and validate. Then select the icon or the “Initialization” item and validate. Finally select the 88/166 icon or the “Hardware” item and validate. Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Item Restricted Reference Modem Setup 9_1 Configuration of modem Ethernet Setup 9_2 ETHERNET Configuration Standby Setup 9_3 Standby setup Energy Save 9_4 Energy save Battery Setup 9_5 Battery Cradle Setup 9_6 Bluetooth Configuration Base Update 9_7 Base update Wi-Fi Setup 9_8 Wi-Fi configuration Display 9_9 Configuration of screen Proxy 9_10 Proxy Bluetooth Audio 9_11 Bluetooth Audio Bluetooth 9_12 Bluetooth Stylet 9_13 Stylus 9_1 Configuration of modem From the “Hardware” screen, select the icon or the “Modem Setup” item and validate. This item is displayed only on terminals equipped with an integrated modem. 89/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Item Reference Output Level 9_1_1 Transmit level Line Selection 9_1_2 Line type Limited speed 9_1_3 Reduced speed Print 9_1_4 Print Save 9_1_5 Save Reload Setup 9_1_6 Reload configuration Default Setup 9_1_7 Default configuration Number of days 9_1_10_1 Number of days Number of failure 9_1_10_2 Number of failures Lookup Depth 9_1_10_3 Depth Quit 9_1_8 Exit Current Limiting 9_1_9 Limit 90/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Restricted 9_1_1 Transmit level Enter the attenuation level (from 5 to 30) of the modem transmission and validate. The standard level is 15 corresponding to 15dBm. 9_1_2 Line type This setting is to adapt the line termination: Long line (with complex impedance) when modem is linked to an external “public” line, or Short line (with real impedance) when modem is linked to a switchboard. 9_1_3 Reduced speed Select “ON” to downgrade the modem speed to V22Bis. Then validate. 9_1_4 Print A ticket is printed with the current configuration (for example to quickly verify the value of modem options before saving). 91/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 9_1_5 Save Modem configuration is stored. Then the terminal resets to apply the new configuration leading to a return to the home screen. 9_1_6 Reload configuration Confirm the reload of the saved configuration. That leads to the loss of all changed parameters. Nota: At first start, the saved configuration is initialized with default values then updated by the configuration file. 9_1_7 Default configuration Confirm the load of the default configuration (TBR21, with no special option). Configuration has to be saved to be applied. 9_1_8 Exit This screen is displayed even if no parameter has been changed. 92/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted If “Yes” is selected, modem configuration is stored. Then the terminal resets to apply the new configuration leading to a return to the home screen. 9_1_9 Limitation of current Activate (or not) the limitation of current limitation (some problems on site may be resolved by this way). 9_1_10 Automatic fallback function The “Number of days”, “Number of failures” and “Lookup depth” items are used to configure the automatic fallback function when too many failures. System switches to its fall back mode (V.22Bis) when the number of call failure reaches the “Number of failures” threshold for the last “Lookup depth” call attempts. Example: “Number of failures” set to “4” and “Lookup depth” set to “5” system will switch to fall back mode if “4” call failures occur among the “5” last attempts. System switches to its normal mode (V.32Bis) after the “number of days” delay. Nota: terminal has to restart to change the modem mode. It performs two successive restarts if the “number of days” delay is reached and the fall back condition is still true. 9_1_10_1 Number of days Enter the number of days (up to 300 days) before return to normal speed mode. Default value is 10. 93/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 9_1_10_2 Number of failures Enter the number of failures (up to 30) before switching in fallback mode. Default value is 3. 9_1_10_3 Depth Enter the number of call attempts used for the computation of the number of call failures. 9_2 ETHERNET Configuration From the “Hardware” screen, select the icon or the “Ethernet Setup” item and validate. This item is displayed only on terminals equipped with an integrated Ethernet link. 94/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 When BOOT Proto is STATIC 95/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 When BOOT Proto is DHCP 96/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted ICO-OPE-00986 97/166 REFERENCE MANUAL Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Item Restricted Reference Boot Proto 9_2_1 Boot IP Address 9_2_2 IP address Subnet Mask 9_2_3 Network mask Gateway 9_2_4 Gateway DNS1 9_2_5 DNS1 DNS2 9_2_6 DNS2 Speed 9_2_7 Rate Ping 9_2_8 Ping Print 9_2_9 Print Save 9_2_10 Save Quit 9_2_11 Exit Reload Setup 9_2_12 Configuration reload Reset Conf. 9_2_13 Configuration Reset 9_2_1 Boot protocol Select the network configuration mode: “Static Address” requiring IP address, Network mask, Gateway, DSN1 and DSN2 parameters, or “DHCP” (Dynamic Host Configuration Protocol) in which parameters are negociated at startup of the terminal (the other parameters have no effect but can still be entered). 98/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 9_2_2 IP address Enter the IP address of the terminal (supplied by the administrator of the local network). IP Address is composed of four digital fields, each one from 0 to 255. 9_2_3 Network mask Enter the sub-network mask of the Ethernet interface (usually 255.255.255.000). As IP Address, the sub-network mask is composed of four digital fields, each one from 0 to 255. 9_2_4 Gateway Enter Gateway address (supplied by the administrator of the local network) which is the IP address of the machine used by gateway to join other networks. 99/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted 9_2_5 DNS1 Enter the IP address of Domain Name Servers 1 (supplied by the administrator of the local network). 9_2_6 DNS2 Enter the IP address of Domain Name Servers 2 (supplied by the administrator of the local network). 9_2_7 Rate Select the speed of the Ethernet link: either 10 or 100 Mbits per second (required for some networks). 9_2_8 Ping 100/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted Enter the IP address of the machine to “ping” (test of the machine and network). This screen is the result of the “ping” request. 9_2_9 Print A ticket is printed with the current configuration (for example to quickly verify the value of modem options before saving). 9_2_10 Save Ethernet parameters are stored. Then the terminal resets to apply the new configuration leading to a return to the home screen. 9_2_11 Exit Select this item to exit the Ethernet configuration application. 101/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 9_2_12 Configuration reload Confirm the reload of the saved configuration. That leads to the loss of all changed parameters. Nota: At first start, the saved configuration is initialized with default values then updated by the configuration file. 9_2_13 Configuration Reset Confirm the load of the factory configuration. 9_3 Standby setup This item is available only on MR40 cash dispensers. Select in the list either: Standby type, or Standby delay. 9_3_1 Standby type Select in the list either: None, or Light, or Deep. 9_3_2 Standby delay Enter the inactivity duration (in seconds, form 0 to 900) before switching to standby mode. 102/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 9_4 Energy save From the “Hardware” screen, select the displayed only on fixed terminals. icon or the “Energy Save” item and validate. This item is 9_4_1 Backlight Enter the duration of the backlightning (in seconds, from 10 to 1000). Then validate. This item is same as “Display/Backlight duration”. 9_4_2 Standby Enter the duration of the backlightning (in seconds, from 10 to 1000). Then validate. 103/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted Enter the delay to switch off the display (in seconds, from 10 to 999999999). Press a key to exit the standby mode. 9_5 Battery Setup From the “Hardware” screen, select the icon or the “Battery Setup” item and validate. This item is displayed only on terminals equipped with a battery. Item Reference New Battery 9_5_1 Battery change Tilt 9_5_2 Tilt USB Charging 9_5_3 USB Charge Standby Delay 9_5_4 Time before standby Standby On Cradle 9_5_5 Standby on cradle ECO Mode 9_5_6 ECO mode 104/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 9_5_1 Battery change Select “Yes” and validate to indicate to the system that you have changed the battery and to avoid an overload (unless you are able to follow the battery change procedure with restart on the base without battery, the terminal may not detect the change of battery). 9_5_2 Tilt Select “Yes” to automatically wake up the terminal when it is picked up while in standby. Select “No” to wake up the terminal only by pressing a key. This item is displayed only on products equipped with a motion sensor as EFT930B. 9_5_3 USB Charge This item is available only on EFT930 terminals. Select “Yes” or “No” to respectively enable or disable charging by USB link. This item is to avoid discharging the battery of the unit on which the terminal is connected by USB like a portable computer. 105/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 9_5_4 Time before standby Enter the inactivity duration (in seconds, from 10 to 120) before going in standby mode. 9_5_5 Standby on cradle Select if the terminal have to switch in standby mode when on a base or to stay active as it is powered. 9_5_6 ECO mode This item is available only on iCMP terminals. Enter the standby duration (in seconds, from 10 to 999999999) before switching off the terminal. 9_6 Bluetooth Configuration From the “Hardware” screen, select the displayed only on Bluetooth terminals. 106/166 icon or the “Cradle Setup” item and validate. This item is Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted To be operational, a Bluetooth terminal shall be associated to at least one base (“Association” item). Once associated, the terminal can use one of the base communication ports (“Advanced” item) like modem, USB, Ethernet… Item Reference Association 9_6_1 Association Advanced 9_6_2 Advanced functions Base State 9_6_3 Base state 9_6_1 Association Shortcut: F.49 Item Reference New Base 9_6_1_1 New base Select Base 9_6_1_2 Select Base Remove Base 9_6_1_3 Remove Base Print Bases 9_6_1_4 Print Base 9_6_1_1 New base Before selecting the “New base” item, the terminal shall be placed on the base to be associated. 107/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted This screen is displayed while the terminal is trying to associate to a new base. When the “Association” attempt is finished, the terminal displays a result screen. If the association is successful, the result screen contains the "Association OK" message and the status bar is updated (refer to 7_6_10 Bluetooth connection): reception level, serial number, “2S” icon… If the association is not successful, the result screen contains the "Association not possible" message and the error type: either its digital code or its textutal description (refer to the following table). Error code Description 0 Association OK -1 Association not possible: IR link unavailable (active trace, MODEM_IS_IR or COM0_IS_IR set to ON). -2 Association not possible: connection not possible with base (Is it a smart base?). -3 Association not possible: the terminal fails to transmit its association request. -4 -5 Association not possible: the terminal has transmitted its association request but has not received a reply. Association not possible: base has returned a null address (base not yet started up or out of order). -6 Association not possible: portable terminal not on a base. -7 Association not possible: driver to be updated. -8 Association not possible: software version of the base is unknown. -9 Association not possible: software version of the terminal is unknown. -10 Association not possible: software version of the base is incorrect. -11 Association not possible: software version of the terminal is incorrect. 108/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 -12 Restricted Association not possible: software versions of both base and terminal are incorrect. Then if the association was successful, the terminal may propose updating base software (refer 9_7 Base update). 9_6_1_2 Select Base Select in the list of associated bases the one to use as peripheral. 9_6_1_3 Remove Base Select in the list of associated bases the one to delete. Peripherals are automatically reassigned to the first known base. 9_6_1_4 Print Base Select a base in the proposed list to print its name, type, Bluetooth address and serial number. 109/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 9_6_2 Advanced functions Item Reference Modem 9_6_2_1 Modem COM0 9_6_2_2 COM0 COMU 9_6_2_3 COMU COM1 9_6_2_4 COM1 COMN 9_6_2_5 COMN COMH 9_6_2_6 COMH Set name base 9_6_2_7 Change base name Print 9_6_2_8 Print Clear Secret 9_6_2_9 Clear Secret 110/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted ICO-OPE-00986 REFERENCE MANUAL Restricted 9_6_2_1 Modem Select the way to communicate via a modem (from highest to lowest priority): FORCE_USB (FORCE_IR on old terminal): set “ON” to force the use of the serial link even if the selected base has a “Bluetooth” interface; ADDRESS: force the use of a specific “Bluetooth” base; IS_CDC (IS_IR on old terminal): set “ON” to enable the use of the serial if the selected base has no “Bluetooth” interface. 9_6_2_2 COM0 Select the way to communicate via COM0 serial port (from highest to lowest priority): FORCE_USB (FORCE_IR on old terminal): set “ON” to force the use of the serial link even if the selected base has a “Bluetooth” interface; ADDRESS: force the use of a specific “Bluetooth” base; IS_CDC (IS_IR on old terminal): set “ON” to enable the use of the serial if the selected base has no “Bluetooth” interface. 111/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted 9_6_2_3 COMU Select the way to communicate via COMU USB port (from highest to lowest priority): FORCE_USB (FORCE_IR on old terminal): set “ON” to force the use of the serial link even if the selected base has a “Bluetooth” interface; ADDRESS: force the use of a specific “Bluetooth” base. 9_6_2_4 COM1 Select the way to communicate via COM1 serial port (from highest to lowest priority): FORCE_USB (FORCE_IR on old terminal): set “ON” to force the use of the serial link even if the selected base has a “Bluetooth” interface; ADDRESS: force the use of a specific “Bluetooth” base; IS_CDC (IS_IR on old terminal): set “ON” to enable the use of the serial if the selected base has no “Bluetooth” interface. 112/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 9_6_2_5 COMN Select the way to communicate via COMN Ethernet port (from highest to lowest priority): FORCE_USB (FORCE_IR on old terminal): set “ON” to force the use of the serial link even if the selected base has a “Bluetooth” interface; ADDRESS: force the use of a specific “Bluetooth” base. 9_6_2_6 COMH Select the way to communicate via COMH Host USB port (from highest to lowest priority): FORCE_USB (FORCE_IR on old terminal): set “ON” to force the use of the serial link even if the selected base has a “Bluetooth” interface; ADDRESS: force the use of a specific “Bluetooth” base. 9_6_2_7 Change base name Enter the name of the base which will be displayed in the status bar. Then validate. 113/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted Then the report of the name change request is displayed. 9_6_2_8 Print Print information about configuration and association of all Bluetooth ports. 9_6_2_9 Clear Secret Place the terminal on the base on which you want to erase the association list. After this operation, terminals have to be associated again to use this base. 9_6_3 Base state Select in the proposed list the base to to get the software version. After validation, terminal prints out its report. 114/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 9_7 Base update Select in the list the base to update (software). Terminal displays an update report (very fleeting if already updated). 9_8 Wi-Fi configuration From the “Hardware” screen, select the icon or the “Cradle Setup” item and validate. This item is displayed only on Wi-Fi terminals. WI-FI configuration consists in creating a profile, i.e. the set of parameters required for connection to an Access Point. Several profiles can be created if connection is required to more than one Access Point. In this case, you can choose the profile which is active and the Access Point to which you want to connect. Security note: If the WiFi interface is used to transfer any sensitive authentication data, including but not limited to the encrypted PIN or account data, the Wi-Fi interface must enforce encryption. The WIFI configuration profile shall be consistent with the PCI DSS v2 Wireless Guidance. 115/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted Select an item: “Profiles” to manage (create, activate, modify, delete) the Wi-Fi profiles (Shortcut: F.55); “Infos” to print the WI-FI terminal parameter and the list of known Access Points (profiles); “IP Setup” to configure the IP parameters of the WI-FI connection (refer 9_8_7 IP configuration). “General” to configure general wifi parameter (ON/OFF and DFS) After the selection of the “Profiles” item; the following screen is displayed: Select an item: “New Profile” to create a new Wi-Fi network (refer 9_8_1 New Profile); “Active Profile” to activate the Wi-Fi connection to a known Wi-Fi network (refer 9_8_4 Active Profile); “Modify Profile” to the configuration of a known Wi-Fi network (refer 9_8_5 Change Profile); “Remove Profile” to suppress a Wi-Fi network (refer 9_8_6 Delete Profile). 116/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 9_8_1 New Profile Select the way to add a new Wi-Fi network: “Scan” to select a network among all visible ones; “Manual” to add a new network even if not visible. WARNING : Use the manual entry to be able to connect and to roam between different access points with the same name (connection to ESS). Use automatic scan to limit the connection to the selected access point only (connection to BSSID). 9_8_1_1 Automatic search The terminal is scanning all Wi-Fi networks within its range. Then select a network among all visible ones. After validation, refer to 9_8_1_3 Security. As some access points can spend too much time to send their answers, you may have to request a new scan for a complete list (exit with the red key). 117/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 9_8_1_2 Manual entry Select if the network is hidden or not. It is recommended to select “No” if the network is really visible. Enter the Wi-Fi network name (ESSID). Then validate. 9_8_1_3 Security After the identification of the network either manually or by scan, select the security level: “Home Security”, refer 9_8_3 Home Security, “Enterprise Security”, refer 9_8_2 Enterprise Security. Nota: “Enterprise Security” requires a “RADIUS” server on the selected Wi-Fi network. 118/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 9_8_1_4 Report Once the configuration of the security is finished, the report is displayed. After validation, the terminal goes back to the “Profiles” menu. The terminal must connect immediately. If this is not the case, it will connect on the next restart or on the next wakeup. 9_8_2 Enterprise Security 9_8_2_1 EAP Method The following screen is displayed after selecting the “Enterprise Security” from the “New Profile” or “Change Profile” procedure. Select the authentication type: TLS – refer 9_8_2_2 WPA_EAP TLS, or TTLS – refer 9_8_2_3 WPA_EAP TTLS, or PEAP – refer 9_8_2_4 WPA_EAP PEAP or SIM – refer 9_8_2_5 WPA_EAP SIM 9_8_2_2 WPA_EAP TLS 119/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted Enter the priority (from 1 to 20) and validate. Priority is the preference order between known Wi-Fi networks: “1” (recommended value) for lowest priority, “20” for the preferred network. The Wi-Fi network is automatically selected according to its visibility and its priority. Enter the user name. Then validate. Select the root certificate. Then validate. 120/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Select the client certificate. Then validate. Select the private key. Then validate. WARNING Private key MUST BE PKCS8 format. Enter the password of the private key. After validation, a report is displayed. 9_8_2_3 WPA_EAP TTLS 121/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Restricted Enter the priority (from 1 to 20) and validate. Priority is the preference order between known Wi-Fi networks: “1” (recommended value) for lowest priority, “20” for the preferred network. The Wi-Fi network is automatically selected according to its visibility and its priority. Select the “Phase 2” negociation and validate. Enter the user name. Then validate. 122/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Enter the password. Then validate. Select the root certificate. After validation, a report is displayed. 9_8_2_4 WPA_EAP PEAP 123/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Restricted Enter the priority (from 1 to 20) and validate. Priority is the preference order between known Wi-Fi networks: “1” (recommended value) for lowest priority, “20” for the preferred network. The Wi-Fi network is automatically selected according to its visibility and its priority. Select the “Phase” negociation and validate. Enter the user name. Then validate. 124/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted Enter the password. Then validate. Select the root certificate. After validation, a report is displayed. 9_8_2_5 WPA_EAP SIM Enter the priority (from 1 to 20) and validate. Priority is the preference order between known Wi-Fi networks: “1” (recommended value) for lowest priority, “20” for the preferred network. The Wi-Fi network is automatically selected according to its visibility and its priority. 9_8_3 Home Security The following screen is displayed after selecting the “Home Security” from the “New Profile” or “Change Profile” procedure. 125/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted Enter the priority (from 1 to 20) and validate. Priority is the preference order between known Wi-Fi networks: “1” (recommended value) for lowest priority, “20” for the preferred network. The Wi-Fi network is automatically selected according to its visibility and its priority. If required by the wireless network, select the type of ciphering: NONE: no ciphering protection, WEP64: WEP ciphering protection with a 64bits key, WEP128 (default choice): WEP ciphering protection with a 128bits key, WPA/WPA2: WPA ciphering protection with a 256bits key. 9_8_3_1 WEP64 Enter the WEP key (10 hexadecimal digits). After validation, a report is displayed. 9_8_3_2 WEP128 126/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted Enter the WEP key (26 hexadecimal digits). After validation, a report is displayed. 9_8_3_3 WPA/WPA2 Enter the WAP passphrase (up to 63 caracters). After validation, a report is displayed. 9_8_4 Active Profile Select in the list the Wi-Fi network to use. Select Automatic to activate the priority mechanism and let the supplicant choosing the best profile automatically and let it roaming if necessary. 127/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Note : prioritity criteria is in preferred order : 1 / the priority number 2 / security priority (open and wep are less priority than other security) / if priority is equal 3 / signal strength / if priority and security equal Note 2 : When access point is hidden, it doesn’t enter into priority mechanism. Then an activation report is displayed. 9_8_5 Change Profile 9_8_5_1 Profile Select in the list the network profile to modify. Then validate. Select if the access point is visible or not. Then validate. 128/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Restricted 9_8_5_2 Security Select the security level: “Home Security”, “Enterprise Security”, refer 9_8_2 Enterprise Security. Nota: “Enterprise Security” requires a “RADIUS” server on the selected Wi-Fi network. 9_8_5_3 Authentication If “Home security” was selected, select the authentication type. After validation, refer 9_8_3 Home Security. 9_8_5_4 Report 129/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted Once the configuration of the security is finished, the report is displayed. After validation, the terminal goes back to the “Profiles” menu. The terminal must connect immediately. If this is not the case, it will connect on the next restart or on the next wakeup. 9_8_6 Delete Profile Select in the list the profile to suppress. Then the deletion report is displayed. 9_8_7 IP configuration 130/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Item Reference Boot Proto 9_8_7_1 Boot Protocol IP Address 9_8_7_2 IP address Subnet Mask 9_8_7_3 Network mask Gateway 9_8_7_4 Gateway DNS1 9_8_7_5 DNS1 DNS2 9_8_7_6 DNS2 Print 9_8_7_7 Print Ping 9_8_7_78 Printing Reset Conf 9_8_7_78 Reset Conf 9_8_7_1 Boot Protocol 131/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Restricted Select the network configuration mode: “Static Address” requiring IP address, Network mask, Gateway, DSN1 and DSN2 parameters, or “DHCP” (Dynamic Host Configuration Protocol) in which parameters are negociated at startup of the terminal (the other parameters have no effect but can still be entered). 9_8_7_2 IP address Enter the IP address of the terminal (supplied by the administrator of the local network). IP Address is composed of four digital fields, each one from 0 to 255. 9_8_7_3 Network mask Enter the sub-network mask of the Ethernet interface (usually 255.255.255.000). As IP Address, the sub-network mask is composed of four digital fields, each one from 0 to 255. 9_8_7_4 Gateway 132/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted Enter Gateway address (supplied by the administrator of the local network) which is the IP address of the machine used by gateway to join other networks. 9_8_7_5 DNS1 Enter the IP address of Domain Name Servers 1 (supplied by the administrator of the local network). 9_8_7_6 DNS2 Enter the IP address of Domain Name Servers 2 (supplied by the administrator of the local network). 9_8_7_7 Print A ticket is printed with the current configuration (for example to quickly verify the value of modem options before saving). 133/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 9_8_7_8 Ping Ping is described on the Ethernet configuration. This is the same function. 9_8_7_9 Reset Conf Reset conf will delete all the wifi profiles recorded. 9_8_8 General setting Select setting you want to change RADIO On/OFF or DFS 9_8_8_1 Radio ON/OFF Select OFF to power OFF the radio. OFF is persistant after reboot. Select ON to power ON the radio. ON is persistant after reboot. 134/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Restricted 9_8_8_2 DFS ON/OFF DFS is used on 5GHz channels to shut down or change chanell when it is required by DFS satellite. In any case the DFS is active. When setted ON, the the scan become passive (no broadcast) to be quite in any AP DFS request case. This could delay a little bit the scan time and connection time. Select OFF to select a passive scan for DFS. OFF is persistant after reboot. Select ON to select an active scan for DFS. ON is persistant after reboot. 9_9 Configuration of screen From the “Hardware” screen, select the icon or the “Display” item and validate. This item is displayed only on terminals equipped with an integrated modem. Item Reference Back Light 9_9_1 Backlighting Backlight Duration 9_9_2 Backlight duration Color Setup 9_9_3 Colors 135/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 9_9_1 Backlighting Adjust the intensity of the backlighting using the “up” or “down” keys of the navigator. Then validate. 9_9_2 Backlight duration Enter the duration of the backlightning (in seconds, from 10 to 1000). Then validate. 9_9_3 Colors From the “Display” screen, select the “Color” item and validate. Then for “Goal”, select either “Background color” or “text color” item. 136/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted For “Goal”, select the color then validate. For “LibGR”, enter the “Red Green Blue” color code: Up and down keys to change the hexadecimal value to the highlighted RGB parameter; Green key to go to another RGB parameter; Yellow key to change line (Text Background); Red key to exit the menu and save the colors. 9_10 Proxy From the “Hardware” screen, select the icon or the “Proxi” item and validate. Select “Yes” if the terminal reaches the bank server via a proxy server. If there is a proxy server, select the protocol type either: SOCKS4 requiring IP address, port and optionally a user ID, or SOCKS5 requiring IP address, port and optionally a login and a password. 137/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted Enter the IP address of the terminal (supplied by the administrator of the local network). IP Address is composed of four digital fields, each one from 0 to 255. Enter the port number. Then validate. 9_10_1 SOCKS4 protocol The following screen is displayed only by selecting “SOCKS4” protocol and activating “user authentication”. Enter the user ID for proxy server. Then validate. 9_10_2 SOCKS5 protocol The following screens are displayed only by selecting “SOCKS5”. 138/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted Select “Yes” if the proxy server requires a user authentication. After validation, refer the following screens. If “No” is selected and validated, the configuration of the proxy server is finished. Enter the login of the user. Then validate. Enter the password of the user. Then validate. 9_11 Bluetooth Audio From the “Hardware” screen, select the icon or the “Bluetooth Streaming” item and validate. This item is available only on mobile Bluetooth iWL280/350. 139/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted This screen is displayed only if the functionality is enabled. If disabled, refer 9_11_1 Activation. Item Reference Enable 9_11_1 Activation Disable 9_11_2 Deactivation Information 9_11_3 Information Discovery 9_11_4 Peripheral research Pincode 9_11_5 Pincode 9_11_1 Activation This screen is displayed only if the functionality is disabled. Select “Enable” to activate the functionality. After validation, the screen presented in 9_11 Bluetooth Audio is displayed. 9_11_2 Deactivation 140/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted Select “Disable” to deactivate the functionality. After validation, the screen presented in 9_11_1 Activation is displayed. 9_11_3 Information The terminal displays information about the Bluetooth headset associated to the functionality (empty screen if no associated peripheral). 9_11_4 Peripheral research 141/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted The terminal looks for Bluetooth peripherals. Select in the list the Bluetooth headset. Then validate. 9_11_5 Pincode Enter the pin code furnished by the headset to unlock the connection. Then validate. 9_12 Bluetooth 142/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted This item is available only on Bluetooth terminals. Item Reference Enable/Disable 9_12_1 Enable/Disable Pair with phone 9_12_2 Pair with phone Add device 9_12_3 Add device Paired devices 9_12_4 Paired device Advanced options 9_12_5 Advanced options 9_12_1 Enable/Disable This screen is displayed only if the functionality is disabled. Select “Enable” to activate the functionality. After validation, the screen presented in 9_12 Bluetooth is displayed. 143/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 9_12_2 Pair with phone Select “Pair with phone” to pair a Bluetooth phone or tablet to the terminal. After validation the following screen is displayed. On the phone or tablet side select the terminal in the list of discovered Bluetooth devices. 144/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted If the pairing mode (refer to 9_12_5_2 Pairing mode for more informations) is set to “Pin Comparison” you should have to compare the passkey on the tablet or phone to the terminal one and validate on the two sides. Else if the pairing mode is set to “Pin entry” you should have to enter the 16 digits Pincode displayed on the terminal to the tablet or smartphone and validate. 145/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Restricted After validation the following screen is displayed a few seconds. At the end of the pairing phase your device should be paired and the following screen is displayed 146/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 147/166 REFERENCE MANUAL If the pairing failed, the following screen is displayed. Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Restricted 9_12_3 Add device In this item you can pair a device to the Bluetooth terminal. But the type of device to pair depends on the type of Bluetooth terminal. Bluetooth printer: o iCM122 o iMP322/iMP352 o iUC180B o iUP250 o iUI120 Bluetooth barcode reader: o iWL222 / iWL252 o iWL282 / iWL284 / iWL286 o iWL354 / iWL356 iOS bridge: o iCM122 o iMP322 o iMP352 An iOS bridge is a type of Bluetotoh device that will be physically connected to the Telium terminal but will be functionnaly driven by the iOS application. That’s why this type is only available on device with the iAP chip. Once the item selected, a screen will display the available Bluetooth devices Select the device you want to pair. If the device does not appear, wait some time (GOAL terminals) or hit Scan for devices (Libgr terminals). Optionnaly, a new screen will appear, to specify whart type of deivce is being paired. The screen will not lways appear, as for some case, Telium can automatically determine whether the device is a printer or a barcode reader. 148/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted The rest of the pairing process is the same as when pairing a phone (refer to section 9_12_2 Pair with phone) 9_12_4 Paired devices In this item you can display and modify the paired devices. After validation the following screen is displayed. Depending on the device type the icons (for GOAL) or prefixes (for Libgr) are: 149/166 Bluetooth printer: Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 o o Bluetooth barcode reader: o o or if it is the selected phone or tablet And [i] or *[i] in Libgr (* identify the selected device) Mobile device for other cases (smartphone or tablet): o 150/166 or if it is the selected barcode reader in GOAL And [B] or *[B] in Libgr (* identify the selected device) iOS bridge (previously named SPP): o o or if it is the selected printer in GOAL and [P] or *[P] in Libgr (* identify the selected device) in GOAL and no prefix in Libgr Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted ICO-OPE-00986 REFERENCE MANUAL Restricted Selecting a device you can manage it. The options depend on the type of device: Bluetooth printer: o Remove: unpair the device o Auto connect: (if this option is supported by the printer) YES to keep the connection alive. This will increase the power consumption (lower battery life) but speed up the printing NO to connect on demand (managed by the Telium application). This will slow the printing as the Bluetooth connection will have to be established each time o Set / Unset as default: To set the printer to use by default Bluetooth barcode reader: o Remove: unpair the device o Set / Unset as default: To set the barcode reader to use by default iOS bridge: o Remove: unpair the device o Set / Unset as default: To set the iOS bridge to use Mobile device for other cases (smartphone or tablet): o Remove: unpair the device o Set / Unset as default: To set the Apple device to use (item only available on Apple device) 151/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 9_12_5 Advanced options In this item you can modify the advanced functions. After validation the following screen is displayed. 9_12_5_1 Rename In this item you can modify the terminal Bluetooth name. After validation the following screen is displayed. 9_12_5_2 Pairing mode 152/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted In this item you can modify the Bluetooth pairing security mode. After validation the following screen is displayed. 9_12_5_3 Power saving Select “Standby Mode” to maintain the Bluetooth connection with devices if the terminal is in stanby mode. In this case the terminal can be woken up from smartphone or tablet. The Bluetooth connection will be maintained in a low energy mode to reduce the battery usage. 9_12_5_4 Smart Connection In this item you can modify the parameters of smart connection to customize Bluetooth paging. After validation the following screen is displayed 153/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 9_12_5_4_1 Enable/Disable This screen is displayed only if the functionality is disabled. Select “Enable” to activate the functionality. After validation, the screen presented in 9_12_5_4 Smart Connection is displayed. 9_12_5_4_2 Max interval In this item you can modify the maximum interval for Bluetooth paging. The value must be between 10 and 3600 seconds 154/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 9_12_5_4_3 Timeout In this item you can modify the timeout for Bluetooth paging. The value must be between 0 and 86400 seconds. The value 0 means infinite. 155/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL 9_13 Stylus This item is available only on iSC terminals. Select in the list the kind of stylus used on the terminal. Then validate. 156/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Restricted 10 Home screen “Home screen” is an application installed with the manager and only in “GOAL” mode. When activated, “Home screen” displays the list of all runnable applications (select one to launch it). Once the inactivity delay of the “home screen” is elapsed, it realases the focus to the system to display the “Idle screen”. If no application manages the “Idle screen”, focus is given back to the “Home screen”. 10_1 Activation From the idle screen, press the function key F . Then select the “Home Screen” item and validate. Select “On” to enable the display of the “Home screen”. Otherwise, select “Off”. This screen is displayed only if “On” was validated. 157/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 REFERENCE MANUAL Item Reference Fomat 10_2 Format Header 10_3 Header Home screen time-out 10_4 Time-out Application selection 10_5 Applications 10_2 Format 158/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted ICO-OPE-00986 REFERENCE MANUAL Select in the list the type of display on the home screen: Mosaic Icon (touch screen only) (color screen only) 159/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted Text (all screens) REFERENCE MANUAL ICO-OPE-00986 Restricted 10_3 Header Select if the header (refer 7_6 Status bar) is displayed or not on the home screen. 10_4 Time-out Enter the duration (in seconds) of the home screen display before switching on the “idle screen”. Then validate. 10_5 Applications Select / unselect using the validate. 160/166 < key the application to be displayed on the “home screen”. Then Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 Restricted 11 Appendix 11_1 List of shortcuts for TELIUM MANAGER functions Shortcut 161/166 Description F.0 Print the list of shortcuts. F.1 Print the status of the applications (cf. 8_1_1). F.2 Print the log of the transactions (cf. 8_1_2). F.3 Go to the Call consultation screen (cf. 8_1_3). F.4 Print the full hardware configuration (cf. 8_1_4_1). F.5 Go to the selection screen for software configuration display (cf. 8_1_4_2). F.6 Go to the selection screen for software configuration printing (cf. 8_1_4). F.7 Launch the software local load – LLT (cf. 8_2_1). F.8 Launch the software load by USB key (cf. 8_2_1). F.9 Launch the software load by MMC/SD card (cf. 8_2_1). F.10 Launch the software remote load (cf. 8_2_2). F.12 Go to the “Date and Time” initialization screen (cf. 6_2 ). F.13 Go to the “Language” initialization screen (cf. 6_1 ). F.14 Go to the “Terminal Number” initialization screen (cf. 6_3 ). F.15 Go to the “Currency” initialization screen (cf. 6_4 ). F.16 Go to the “Switchboard” initialization screen (cf. 6_5 ). F.17 Go to the “Pinpad” initialization screen (cf. 6_6 ). F.18 Go to the “Stripe Reader” initialization screen (cf. 6_8 ). F.19 Display the “Serial Number” (cf. 6_9 ). F.20 Go to the “Network” initialization screen (cf. 6_10 ). F.21 Go to the “Cash Register” initialization screen (cf. 6_12 ). F.22 Go to the “TMS network” initialization screen (cf. 6_13 ). F.23 Go to the “SIM Code” initialization screen (cf. 7_1 ). F.24 Restore the “param.par” parameters (cf. 7_3 ). F.25 Go to the “Idle Screen” initialization screen (cf. 7_4 ). F.26 Go to the “Password” initialization screen (cf. 7_5 ). F.27 Print the “System” diagnosis (cf. 8_3_1). F.28 Print the “Booster” diagnosis (cf. 8_3_1). F.29 Send the diagnosis to TMS (cf. 8_3 ). F.30 Go to the “local diagnosis” deletion screen (cf. 8_3_2). F.31 Go to the “Hardware Modification” screen (cf. 8_5 ). Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using ICO-OPE-00986 162/166 REFERENCE MANUAL Restricted F.32 Go to the “Software Modification” screen (cf. 8_5 ). F.33 Lookup Licence (cf. 8_6_1). F.34 Go to the “Add Licence” screen (cf. 8_6_2). F.37 Print the TPASS hardware configuration (cf. 8_1_4_1). F.38 Print the target software configuration (cf. 8_1_4_2). F39 Print the pinpad hardware configuration (cf. 8_1_4_1). F40 Print the pinpad software configuration (cf. 8_1_4_2). F.41 Go to the “Contactless” initialization screen (cf. 6_7 ). F.42 Go to the “Deletion” screen (cf. 8_4 ). F.43 Print the “Initialization” parameters (cf. 6_14 ). F.44 Pinpad reader diagnosis (cf. 8_3 ) F.48 Go to the “Telium Manager” screen (cf. 6). F.49 Go to the “Bluetooth Association” screen (cf. 9_6_1). F.50 Go to the “Beep On Key” screen (cf. 7_8 ). F.51 Remote download IST (cf. 8_2 ) F.52 Remote download IPP (cf. 8_2 ) F.53 Pinpad emulation (cf. 7_10 ) F.54 Go to the “PUK code” screen (cf. 7_2 ) F.55 Go to the “Wifi profiles” screen (cf. 9_8 ) F.56 Go to the “Wifi IP” screen (cf. 9_8_7 ) F.57 Go to the “Bluetooth” screen (cf. 9_12 ) F.58 Go to screen for the software information of hardware configuration on display (cf. 8_1_4_1). Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using REFERENCE MANUAL ICO-OPE-00986 11_2 List of the gateway numbers Item 163/166 Reference 0 NO GATEWAY 32 NO X28 33 PAD X28 SSL 40 RFC1086 41 RFC1086 SSL 42 RFC1086+ 43 RFC1086+ SSL 64 GIPX25 V2 65 GIPX25 V2 SSL 66 GIPX25 V1 67 GIPX25 V1 SSL Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted ICO-OPE-00986 REFERENCE MANUAL 11_3 Call tree of Tellium Manager Consultation 8_1 State 8_1_1 Transaction 8_1_2 Call 8_1_3 Configuration 8_1_4 Evolution 8_2 Load 8_2_1 Local Extern Remote Load 8_2_2 Pinpad Initialization 6 Parameters Language 6_1 Date and time 6_2 Terminal Number 6_3 Currency 6_4 Switchboard 6_5 Pinpad 6_6 Contactless 6_7 Stripe Reader 6_8 Serial Number 6_9 Network Type 6_10 Fallback Network 6_11 Cash Connection 6_12 TMS Network 6_13 SIM Code 7_1 PUK Code 7_2 Default Conf. 7_3 Screen Saver 7_4 Password 7_5 Header 7_6 Footer 7_7 Beep On Key 7_8 Beep On Pincode 7_9 PINPAD Emulation 7_10 Hardware 9 Modem Setup 9_1 Output Level 9_1_1 Line Selection 9_1_2 Limited speed 9_1_3 Print 9_1_4 Save 9_1_5 Reload Setup 9_1_6 Default Setup 9_1_7 Number of days 9_1_10_1 Number of failure 9_1_10_2 Lookup Depth 9_1_10_3 Quit 9_1_8 Current Limiting 9_1_9 Ethernet Setup 9_2 Boot Proto 9_2_1 IP Address 9_2_2 164/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted ICO-OPE-00986 REFERENCE MANUAL Subnet Mask 9_2_3 Gateway 9_2_4 DNS1 9_2_5 DNS2 9_2_6 Speed 9_2_7 Ping 9_2_8 Print 9_2_9 Save 9_2_10 Quit 9_2_11 Reload Setup 9_2_12 Reset Conf. 9_2_13 Standby Setup 9_3 Energy Save 9_4 Backlight 9_4_1 Light standby 9_4_2 Battery Setup 9_5 New Battery 9_5_1 Tilt 9_5_2 USB Charging 9_5_3 Standby Delay 9_5_4 Standby On Cradle 9_5_5 ECO Mode 9_5_6 Cradle Setup 9_6 Association 9_6_1 New Base 9_6_1_1 Select Base 9_6_1_2 Remove Base 9_6_1_3 Print Bases 9_6_1_4 Advanced 9_6_2 Modem 9_6_2_1 COM0 9_6_2_2 COMU 9_6_2_3 COM1 9_6_2_4 COMN 9_6_2_5 COMH 9_6_2_6 Set base name 9_6_2_7 Print 9_6_2_8 Clear Secret 9_6_2_9 Base State 9_6_3 Base Update 9_7 Wi-Fi Setup 9_8 Profiles New Profile 9_8_1 Active Profile 9_8_4 Modify Profile 9_8_5 Remove Profile 9_8_6 Infos IP Setup 9_8_7 Boot Proto 9_8_7_1 IP Address 9_8_7_2 Subnet Mask 9_8_7_3 Gateway 9_8_7_4 DNS1 9_8_7_5 DNS2 9_8_7_6 Print 9_8_7_7 Display 9_9 165/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted REFERENCE MANUAL ICO-OPE-00986 Back Light 9_9_1 Backlight Duration 9_9_2 Color Setup 9_9_3 Proxy 9_10 SOCKS4 9_10_1 SOCKS5 9_10_2 Bluetooth Audio 9_11 Enable 9_11_1 Disable 9_11_2 Information 9_11_3 Discovery 9_11_4 Pincode 9_11_5 Bluetooth 9_12 Enable/Disable 9_12_1 Pair with phone 9_12_2 Add device 9_12_3 Paired device 9_12_4 Advanced options 9_12_5 Stylet 9_13 Diagnosis 8_3 Local Telediagnostic Clear Diag to USB Diag to MMC PINPAD TeliumPass diagnostic Deletion 8_4 Modification 8_5 Hardware Sorftware License 8_6 Consultation 8_6_1 Make list 8_6_2 166/166 Ingenico document - Reproduction or disclosure prohibited without written authorization Please check document validity before using Restricted
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 166 Language : fr-FR Tagged PDF : Yes Title : ICO-PE-285-GU-FR-V1 Author : Edgar Subject : Traduction en anglais Creator : Microsoft® Word 2010 Create Date : 2015:02:13 10:01:02+01:00 Modify Date : 2015:02:13 10:01:02+01:00 Producer : Microsoft® Word 2010EXIF Metadata provided by EXIF.tools