UAM_Manual_C6100003_3_en UAM Manual C6100003 3 En
User Manual:
Open the PDF directly: View PDF
Page Count: 155 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- 1. Introduction
- 2. Safety precautions
- 3. Product overview
- 3.1 Features of UAM-05LP
- 3.2 Components of UAM-05LP
- 3.3 Operation principle
- 3.4 Scanning area
- 3.5 Area switching
- 3.6 Incremental encoder
- 3.7 OSSD
- 3.8 External device monitoring (EDM) function
- 3.9 Muting function
- 3.10 Reference monitoring function
- 3.11 Area sequence function
- 3.12 Response time
- 3.13 Other outputs
- 3.14 Information indicator
- 3.15 Ethernet communication
- 3.16 Function to configure UAM by SD card
- 3.17 Master-Slave Function
- 3.18 Laser Off Mode
- 3.19 Scan Skip Function
- 3.20 Optical Window Contamination Warning Function
- 4. Application examples of UAM
- 4.1 Access protection (Horizontal application Stationary Protection zone 1)
- 4.2 Access protection (Stationary Horizontal application with Dual Protection zone)
- 4.3 Access protection (Vertical application- whole body detection)
- 4.4 Access protection (Vertical application Stationary)
- 4.5 Area protection (Horizontal application Mobile) Fixed area
- 4.6 Area protection (Mobile, Horizontal, Single Protection, Variable Area)
- 4.7 Area protection (Mobile, Horizontal, Single Protection, Encoder Input)
- 4.8 Area protection (Mobile, Horizontal, 2 Units Interconnected, Variable Area)
- 4.9 Area protection (Mobile, Horizontal, 4 Units Interconnected, Variable Area)
- 4.10 Area protection (Mobile, Horizontal, Autonomous Navigation)
- 4.11 Default Values
- 5. Installation
- 6. Wiring
- 7. Function configuration of UAM
- 7.1 About UAM Project Designer application
- 7.2 System requirements
- 7.3 Installatiion of UAM Project Designer
- 7.4 Device driver installation
- 7.5 Starting the UAM Project Designer
- 7.6 Components of UAM Project Designer
- 7.7 Menu bar
- 7.8 Tool bar
- 7.9 Subpanel
- 7.10 Status bar
- 7.11 Connecting UAM with PC
- 7.12 Password
- 7.13 Configuration mode
- 7.14 Function configuration
- 7.15 Area configuration
- 7.16 Transmit configurations to UAM
- 7.17 Save project file
- 7.18 Read configuration from UAM
- 7.19 Open project file
- 7.20 Recording the UAM data
- 7.21 Replay the log data
- 7.22 Save settings to SD card
- 7.23 UAM configuration through SD card
- 8. Inspection and maintenance
- 9. Troubleshooting
- 10. Specification
- 11. Package contents
- 12. Options
- 12.1 Base mounting bracket (Model: UAM-BK03)
- 12.2 Rear mounting bracket (Model: UAM-BK04)
- 12.3 USB cable (Model: UAM-MUSB)
- 12.4 Ethernet cable (Model: UAM-ENET)
- 12.5 Configuration CD (Model: UAM-CD03)
- 12.6 Optical window for replacement (Model: UAM-W002)
- 12.7 Cover Bracket (Type: UAM-BK05)
- 12.8 Connector Cable (UAM-05LP-T301C Only)
- 13. External dimension
- 14. EC Declaration of conformity
- 15. Revision history
- 16. Representative contacts