Vertical Fuel Tank Operator Manual Web 12 15 USA LR
User Manual: Vertical-Fuel-Tank-Operator-Manual-Web-12-15-15-USA-LR
Open the PDF directly: View PDF 
.
Page Count: 56
| Download | |
| Open PDF In Browser | View PDF |
PRODUCT WARRANTY REGISTRATION FORM WARRANTY REGISTRATION This form must be filled out by the dealer and signed by both the dealer and the customer at the time of delivery. Please mail or fax the completed form for validation of the equipment registration. Customer’s Name______________________________________________________ Address ______________________________________________________________ City, State, Postal Code____ _____________________, _______, ___________ Cut Here to Remove Page Phone Number (_______) _______- ___________ PRODUCT INFORMATION Fuel Tank Model # ___________ S e r i a l N u m b e r # _______________________ I have thoroughly instructed the buyer on the above-described equipment, including review of the Operator’s Manual content, equipment care, adjustments, operational use, safety procedures, and applicable warranty policy. Dealer/Company Name____________________________________ City, State, Postal Code _________________________, ________________ , ______________ Dealer’s Signature_____________________________ ____________Date ____/____/______ The above equipment and Operator’s Manual have been received by me, and I have been thoroughly instructed as to care, adjustments, safe operation, and applicable warranty policy. Owner’s Signature_____________________________________ Date ____/____/_______ 2902 Expansion Blvd. Storm Lake, Iowa 50588 Phone: 800-437-2334 Fax: 712-732-1028 Email: iowa_warranty@meridianmfg.com 3 PRODUCT WARRANTY REGISTRATION FORM DEALER INSPECTION REPORT ____ Make sure the cap of the emergency vent will raise off of the base. ____ Make sure the “Tank Vent” warning label is attached to the fill cap. ____ If installed, make sure the fuel pump is working properly. ____ Make sure the owner is instructed to hire a professional electrician to install wiring for the fuel pump. 2902 Expansion Blvd. Storm Lake, IA 50588 Phone: 712-732-1780 Fax: 712-732-1028 CERTIFICATE OF ORIGIN LICENSING INFORMATION Date: ____/___/_______ DEALER: SOLD TO: ___________________________Business ___________________________Contact ___________________________Address ___________________________City, State, Zip ___________________________Business ___________________________Contact ___________________________Address ___________________________City, State, Zip Cut Here to Remove Page FUEL TANK MODEL # _________________________________________________________ 4000 gal. Fuel Tank Bone White 5000 gal. Fuel Tank Bone White 8500 gal. Fuel Tank Bone White 10000 gal. Fuel Tank Bone White 12000 gal. Fuel Tank Bone White 15000 gal. Fuel Tank Bone White 64056 64068 64045 64044 64040 64080 5 IMPORTANT INFORMATION SERIAL NUMBER LOCATION PATENT INFORMATION Please provide the serial number of your Meridian Fuel Tank when ordering parts or requesting service or other information. The serial number plates are located where indicated. Please record the numbers in the space provided below for easy reference. Tank Capacity: ____________________________ (1) Meridian Serial Number: __________________ Meridian continuously enhances its product offering through product improvements and new product innovations. Marketplace feedback, technological innovation, new materials and manufacturing methods, and a philosophy of continuous improvement constantly challenge the company to develop new and better ways of addressing market needs. Meridian is committed to innovation and reinvestment and as a result, the company maintains a portfolio of patents and intellectual property. For more information on our patents please see our website: www.meridianmfg.com/patents (2) UL Listing Serial Number: _________________ (3) Factory ID Number: _____________________ 7 Contents 1. INTRODUCTION . . . . . . . . . . . . . . . . . . . 1.1 Congratulations . . . . . . . . . . . . . . . . 1.2 Owner/User . . . . . . . . . . . . . . . . . . . 1.3 Disposal of Equipment at End of Useful Life . . . . . . . . . . . . . . . . . . 10 10 10 10 2. SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.1 Additional Safety Words . . . . . . . . . . 12 2.2 Safety Training . . . . . . . . . . . . . . . . . 12 2.3 Safety Icon Nomenclature . . . . . . . . 13 2.3.1 Personal Protection/ Important Information . . . . 13 2.3.2 Prohibited Actions . . . . . 13 2.3.3 Hazard Avoidance . . . . . 13 2.4 General Safety . . . . . . . . . . . . . . . . . 13 2.5 Safety Signs . . . . . . . . . . . . . . . . . . . 14 2.6 Installation . . . . . . . . . . . . . . . . . . . . 14 2.7 Operating Safety . . . . . . . . . . . . . . . 14 2.8 Maintenance Safety . . . . . . . . . . . . . 14 2.9 Diesel Fuel Safety . . . . . . . . . . . . . . 14 2.9.1 Inhalation Hazard . . . . . 14 2.9.2 Fire and Explosion Hazards 14 2.9.3 Eye Protection . . . . . . . 14 2.9.4 Ingestion . . . . . . . . . . 15 2.9.5 Skin Protection . . . . . . . 15 2.9.6 Storage Precautions . . . . 15 2.10 Gasoline Safety . . . . . . . . . . . . . . . . 15 2.10.1 Inhalation Hazard . . . . . 15 2.10.2 Fire and Explosion Hazards 15 2.10.3 Eye Protection . . . . . . . 16 2.10.4 Ingestion . . . . . . . . . . 16 2.10.5 Skin Protection . . . . . . . 16 2.10.6 Storage Precautions . . . . 16 2.11 Biodiesel . . . . . . . . . . . . . . . . . . . . . 17 2.12 U.S. Federal, State, and Local Regulatory Information . . . . . . . . . . . 17 2.12.1 SPCC Program . . . . . . . 17 2.13 Sign-Off Form . . . . . . . . . . . . . . . . . 18 3. SAFETY SIGNS . . . . . . . . . . . . . . . . . . . . 3.1 General Information . . . . . . . . . . . . . 3.2 How to Install Safety Signs . . . . . . . 3.3 Decal Locations . . . . . . . . . . . . . . . . 3.4 Emergency Vent Safety Sign . . . . . . 19 19 19 19 21 4. TANK LABELING . . . . . . . . . . . . . . . . . . . 22 4.1 General Information . . . . . . . . . . . . . 22 5. SPECIFICATIONS . . . . . . . . . . . . . . . . . . 23 5.1 Overall Dimensions . . . . . . . . . . . . . 23 5.2 Specifications . . . . . . . . . . . . . . . . . . 23 6. TANK COMPONENTS . . . . . . . . . . . . . . . 24 8 7. INSTALLATION . . . . . . . . . . . . . . . . . . . . 7.1 Site Selection . . . . . . . . . . . . . . . . . . 7.2 Permitting . . . . . . . . . . . . . . . . . . . . . 7.3 Mounting Fuel Tank to Concrete Pad . . . . . . . . . . . . . . . . . . 7.4 Electrical Wiring Procedure For Fuel Pump . . . . . . . . . . . . . . . . . . . . 26 26 26 26 26 8. OPERATION . . . . . . . . . . . . . . . . . . . . . . . 27 8.1 Operating Safety . . . . . . . . . . . . . . . 27 8.2 Fire Extinguisher . . . . . . . . . . . . . . . 27 8.3 Pre-operation Checks . . . . . . . . . . . 27 8.4 Filling the Fuel Tank with Fuel . . . . . 28 8.4.1 Filling the Fuel Tank Using the Optional Remote Fill Box . . . . . . . . . . . 28 8.5 Filling Machinery From the Fuel Tank . . . . . . . . . . . . . . . . . . . . . 29 9. MAINTENANCE . . . . . . . . . . . . . . . . . . . . 31 9.1 General Safety . . . . . . . . . . . . . . . . . 31 9.2 General Maintenance . . . . . . . . . . . . 31 9.3 Emergency Vent . . . . . . . . . . . . . . . . 31 9.3.1 Safety . . . . . . . . . . . . 31 9.3.2 Inspection . . . . . . . . . 31 9.3.3 Replacement of Emergency . Vent . . . . . . . . . . . . 32 9.4 Electric Fuel Pump . . . . . . . . . . . . . . 32 9.5 Hose Replacement . . . . . . . . . . . . . 32 9.6 Fuel Meter . . . . . . . . . . . . . . . . . . . . 32 9.6.1 Calibration . . . . . . . . . 32 9.6.2 Maintenance . . . . . . . . 33 9.6.3 Storage . . . . . . . . . . . 33 9.7 Tank Inspection . . . . . . . . . . . . . . . . 33 9.8 Removal from Service . . . . . . . . . . . 33 9.8.1 Tank Inspection Checklist . 34 10. OEM LITERATURE . . . . . . . . . . . . . . . . . 10.1 Emergency Vent Cap . . . . . . . . . . . . 10.2 Submersible Fuel Pump . . . . . . . . . . 10.3 Fuel Pump and Meter . . . . . . . . . . . 10.4 Tank Level Gauge . . . . . . . . . . . . . . 35 35 35 36 36 11. FR-313 FUEL PUMP TROUBLESHOOTING CHART . . . . . . . . 37 12. WARRANTY STATEMENT . . . . . . . . . . . . 39 13. PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 13.1 Optional Equipment . . . . . . . . . . . . . 41 13.2 2” Fill System Without Remote Fill Box . . . . . . . . . . . . . . . . . . . . . . 42 13.3 3” Fill System With Remote Fill Box . . . . . . . . . . . . . . . . . . . . . . 43 13.4 Dispensing System with Submersible . Pump (4000 - 5000) . . . . . . . . . . . . . 44 13.5 Dispensing System with Submersible . Pump (8500 - 15000) . . . . . . . . . . . . 45 13.6 Dispensing System with 313 Pump . 46 13.7 21496 Hose Reel Upgrade . . . . . . . 47 13.8 61536 OPW Tank Level Gauge . . . . 47 13.9 61547 3” Updraft Vent with 24” Elevation Pipe . . . . . . . . . . . . . . . . . 48 13.10 61548 3” Pressure/Vac. Vent Alarm with 24” Elevation Pipe . . . . . . . . . . 48 14. CAPACITY CHARTS (GALLONS PER VERTICAL INCH) . . . . . . . . . . . . . . . . . . . 14.1 4,000 Gallon Vertical Double Wall Fuel Tank (64056) . . . . . . . . . . . . . . 14.2 5,000 Gallon Vertical Double Wall Fuel Tank (64068) . . . . . . . . . . . . . . 14.3 8,500 Gallon Vertical Double Wall Fuel Tank (64045) . . . . . . . . . . . . . . 14.4 10,000 Gallon Vertical Double Wall Fuel Tank (64044) . . . . . . . . . . . . . . 14.5 12,000 Gallon Vertical Double Wall Fuel Tank (64040) . . . . . . . . . . . . . . 14.6 15,000 Gallon Vertical Double Wall Fuel Tank (64080) . . . . . . . . . . . . . . 49 49 50 51 52 53 54 9 1. INTRODUCTION 1.1 CONGRATULATIONS 1.2 OWNER/USER Congratulations on your choice of a Meridian Manufacturing Inc. Fuel Tank to complement your farming operation. This equipment has been designed and manufactured to meet the exacting standards for such equipment in the agricultural industry and will keep your operation running at optimum efficiency. It is the responsibility of the owner/user to read this manual and to train all other users before they start using the tank. Follow all safety instructions exactly. Safety is everyone’s business. By following recommended procedures, a safe working environment is provided for the user, bystanders, and the area around the work site. Untrained users are not qualified and must not use this tank. In addition to the design and configuration of the tank, hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper training of personnel involved in the installing, filling, and using this tank. It is the responsibility of the owner or user to read this manual and to train all users before using the tank. Follow all safety instructions as provided in this manual. The Fuel Tank is designed to store gasoline or diesel fuel for agricultural applications. Keep this manual available for easy reference and to pass on to new owners. Call your Meridian Manufacturing Inc. dealer if you need assistance, information, or additional copies of the manuals. This above‑ground, steel fuel storage tank complies with local, state, and federal regulations for bulk fuel storage of gasoline or diesel fuel. The tank uses a double wall system which is in use worldwide. The information, specifications, and illustrations in this manual are those in effect at the time of printing. We reserve the right to change specifications or design at any time without notice. Safe, efficient, and trouble‑free operation of your Fuel Tank requires that you, and anyone else who will be using the tank, read and understand the Safety, Operation, Maintenance, and Troubleshooting information contained within this Operator’s Manual. 1.3 DISPOSAL OF EQUIPMENT AT END OF USEFUL LIFE This manual covers the 4000, 8500, 10000, 12000, and 15000 gallon Vertical Double Wall tanks manufactured by Meridian Manufacturing Inc. Use the Table of Contents as a guide to locate required information. WARNING Do not install or fill the tank until you read and understand the information contained in this manual. 10 The Fuel Tank has been designed for the specific purpose of storing gasoline or diesel fuel. When this tank is no longer capable of performing its designed purpose, it should be removed from service in compliance with applicable regulations, then dismantled and scrapped. Do not use any materials or components from this tank for any other purpose. 2. SAFETY SAFETY ALERT SYMBOL This Safety Alert symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! The Safety Alert symbol identifies important safety messages on the Meridian Fuel Tank Models and in the manual. When you see this symbol, be alert to the possibility of personal injury or death. Follow the instructions in the safety message. WHY IS SAFETY IMPORTANT TO YOU? 3 Big Reasons • Accidents Disable and Kill • • Accidents Cost • • Accidents Can Be Avoided • SIGNAL WORDS: Note the use of the signal words DANGER, WARNING, and CAUTION with the safety messages. The appropriate signal word for each message has been selected using the following guidelines: CAUTION CAUTION - Indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices. WARNING DANGER WARNING - Indicates a DANGER - Indicates an potentially hazardous situation imminently hazardous situation that, if not avoided, could result that, if not avoided, will result in in death or serious injury, and death or serious injury. This signal includes hazards that are word is to be limited to the most exposed when guards are extreme situations typically for removed. It may also be used to equipment components which, for alert against unsafe practices. functional purposes, cannot be guarded. If you have any questions not answered in this manual, require additional copies of the manual, or the manual is damaged, please contact your dealer or Meridian Manufacturing Group, 2902 Expansion Blvd., Storm Lake, Iowa, 50588, toll free 1-800-437-2334, phone (712) 732-1780, or fax (712) 732-1028. 11 2.1 ADDITIONAL SAFETY WORDS • Fuel Tank owners must give operating instructions to users before allowing them to operate the equipment, and then annually thereafter per OSHA (Occupational Safety and Health Administration) regulation 1928.57. • The most important safety feature on this equipment is a SAFE operator. It is the operator’s responsibility to read and follow ALL safety and operating instructions in the manual. Most accidents can be avoided. • A person who has not read and understood all operating and safety instructions is not qualified to operate the equipment. An untrained operator exposes themselves and bystanders to possible serious injury or death. Always be and stay alert to any possible unsafe operating or maintenance procedures or conditions. • Do not modify the fuel tank in any way. Unauthorized modification may impair the function and/or safety of the components and could affect the life of the equipment, possibly invalidating the warranty coverage. • Think SAFETY! Work SAFELY! NOTICE Indicates that equipment or property damage can result if instructions are not followed. SAFETY INSTRUCTIONS Safety instructions (or equivalent) signs indicate specific safety-related instructions or procedures. Note: Contains additional information important to a procedure. 2.2 SAFETY TRAINING 1. Safety is a primary concern in the design and manufacture of our products. Unfortunately, our efforts to provide safe equipment can be wiped out by a single careless act of an operator or bystander. 2. Know your controls and how to immediately stop the fuel pump in an emergency. Read this manual and the one provided with all auxiliary equipment. YOU are responsible for the SAFE operation and maintenance of your Meridian Manufacturing Inc. Fuel Tank. YOU must ensure that you and anyone else who is going to operate, maintain, or work around the Fuel Tank be familiar with the operating and maintenance procedures and related SAFETY information contained in this manual. This manual will take you step-by-step through your working day and alert you to all good safety practices that should be adhered to while using the Fuel Tank. Remember, YOU are the key to safety. Good safety practices not only protect you but also the people around you. Make these practices a working part of your safety program. Be certain that EVERYONE operating this equipment is familiar with the recommended operating and maintenance procedures and follow all the safety precautions. Most accidents can be prevented. Do not risk injury or death by ignoring good safety practices. 12 2.3 SAFETY ICON NOMENCLATURE Pictorial icons signal a type of hazard and warn of personal protection issues, prohibited actions, and hazard avoidance. 2.3.1 Personal Protection/Important Information Read the manual Damaged safety signs Eye protection Fire extinguisher First aid kit Hand protection Inspect equipment OEM THINK SAFETY! OEM parts only 2.3.3 Hazard Avoidance Fall hazard Safety alert symbol Slipping hazard Tripping injury Shock hazard Fire hazard Dangerous fumes Poison material hazard Provide proper ventilation Avoid skin contact Safety shields Think safety Use proper tools Use respirator Fill before use. 2.3.2 Prohibited Actions Do not alter or modify Do not weld No alcohol No drugs No young children 2.4 GENERAL SAFETY Read and understand the Operator’s Manual and all safety signs before installing, filling, or using the Fuel Tank. The Fuel Tank has been designed for the specific purpose of storing gasoline or diesel fuel. DO NOT modify or use this tank for any application other than that for which it was designed. Tanks that are filled or operated improperly or by untrained personnel can be dangerous, exposing themselves and/or bystanders to possible serious injury or death. Have a first aid kit available for use should the need arise and know how to use it. Have a fire extinguisher available for use should the need arise and know how to use it. No open flame No smoking 13 When working around or operating this tank, wear appropriate personal protective equipment. This list includes but is not limited to: • Protective goggles or glasses. • Gloves and protective clothing. Clear the area of people, especially small children, before filling the tank or refueling machinery. Review safety related items annually with all personnel who will be operating, using, or maintaining the Fuel Tank. rovide the end user with the owner/ P operator literature. Fuel Tank owners must provide operating instructions to anyone using the tank. Under no circumstances should young children be allowed to work with or around the Fuel Tank. Do not attempt to fill or use this tank under the influence of drugs or alcohol. Consult your doctor before using this tank while taking prescription medications. 2.5 SAFETY SIGNS Refer to the Safety Signs Locations section for safety information. 2.6 INSTALLATION 2.9 DIESEL FUEL SAFETY 2.9.1 Inhalation Hazard DANGER Always avoid breathing fuel vapors or mists which may cause dizziness, drowsiness, moderate eye irritation, and/or skin irritation (rash). Excessive exposure may cause irritations to the nose, throat, lungs, and respiratory tract. Central nervous system (brain) effects may include headache, dizziness, loss of balance and coordination, unconsciousness, coma, respiratory failure, and death. In case of inhalation, move the person to fresh air. If the person is not breathing, provide artificial respiration. If necessary, provide additional oxygen once breathing is restored if trained to do so. Seek medical attention immediately. 2.9.2 Fire and Explosion Hazards WARNING Diesel fuel presents a moderate fire hazard. Vapors may be ignited rapidly when exposed to heat, spark, open flame, or other source of ignition. When mixed with air and exposed to an ignition source, flammable vapors can burn in the open or explode in confined spaces. Being heavier than air, vapors may travel long distances to an ignition source and flash back. Runoff to sewer may cause fire or explosion hazard. Refer to the Installation section for safety information. 2.7 OPERATING SAFETY Refer to the Operation section for safety information. 2.8 MAINTENANCE SAFETY Refer to the Maintenance section for safety information. 2.9.3 Eye Protection WARNING Safety glasses or goggles are recommended where there is a possibility of splashing or spraying. Contact with liquid or vapor may cause mild irritation. In case of contact with eyes, immediately flush with clean, low-pressure water for at least 15 minutes. Hold eyelids open to ensure adequate flushing. Seek medical attention. 14 2.9.4 Ingestion WARNING 2.9.6 Storage Precautions CAUTION The major health threat of ingestion occurs from the danger of aspiration (breathing) of liquid drops into the lungs, particularly from vomiting. Aspiration may result in chemical pneumonia (fluid in the lungs), severe lung damage, respiratory failure, and even death. Ingestion will cause gastrointestinal disturbances, including irritation, nausea, vomiting and diarrhea, and central nervous system (brain) effects similar to alcohol intoxication. In severe cases, tremors, convulsions, loss of consciousness, coma, respiratory arrest, and death may occur. Keep away from flame, sparks, excessive temperatures, and open flame. Keep tank fill port closed because an empty tank may contain explosive vapors. Do not pressurize, cut, heat, weld, or expose tanks to sources of ignition. In case of ingestion DO NOT INDUCE VOMITING. Do not give liquids. Obtain immediate medical attention. If spontaneous vomiting occurs, lean victim forward to reduce the risk of aspiration. Monitor for breathing difficulties. 2.10.1 Inhalation Hazard Small amounts of material which enter the mouth should be rinsed out until the taste is dissipated. 2.9.5 Skin Protection CAUTION Contact with diesel fuel may cause skin irritation with prolonged or repeated contact. Chemical protective clothing, including gloves constructed of nitrile, neoprene, or PVC, is recommended when in close contact with diesel fuel. Long-term, repeated exposure to diesel fuel may cause skin cancer. In case of contact with skin, remove contaminated clothing. Wash contaminated areas thoroughly with soap and water or waterless hand cleanser. Obtain medical attention if irritation or redness develops. Store the tank in a well-ventilated area. Avoid storage near incompatible materials. 2.10 GASOLINE SAFETY DANGER Always avoid breathing fuel vapors or mists which may cause headache, nausea, dizziness, drowsiness, confusion, loss of balance and coordination, unconsciousness, coma, respiratory failure, and death. Excessive exposure may cause irritations to the nose, throat, lungs, and respiratory tract. Central nervous system (brain) effects may include convulsions and seizures. In case of inhalation, move the person to fresh air. If the person is not breathing, provide artificial respiration. If necessary, provide additional oxygen once breathing is restored if trained to do so. Seek medical attention immediately. 2.10.2 Fire and Explosion Hazards WARNING Gasoline is a Class IB Flammable Liquid. Vapors may be ignited rapidly when exposed to heat, spark, open flame, or other source of ignition. When mixed with air and exposed to an ignition source, flammable vapors can burn in the open or explode in confined spaces. Being heavier than air, vapors may travel long distances to an ignition source and flash back. Runoff to sewer may cause fire or explosion hazard. 15 2.10.3 Eye Protection WARNING Safety glasses or goggles are recommended where there is a possibility of splashing or spraying. Contact with liquid or vapor may cause mild irritation. In case of contact with eyes, immediately flush with clean, low-pressure water for at least 15 minutes. Hold eyelids open to ensure adequate flushing. Seek medical attention. 2.10.4 Ingestion WARNING The major health threat of ingestion occurs from the danger of aspiration (breathing) of liquid drops into the lungs, particularly from vomiting. Aspiration may result in chemical pneumonia (fluid in the lungs), severe lung damage, respiratory failure, and even death. Ingestion will cause gastrointestinal disturbances, including irritation, nausea, and vomiting and central nervous system (brain) effects similar to alcohol intoxication. In severe cases, tremors, convulsions, loss of consciousness, coma, respiratory arrest, and death may occur. In case of ingestion DO NOT INDUCE VOMITING. Do not give liquids. Obtain immediate medical attention. If spontaneous vomiting occurs, lean victim forward to reduce the risk of aspiration. Monitor for breathing difficulties. Small amounts of material which enter the mouth should be rinsed out until the taste is dissipated. 16 2.10.5 Skin Protection CAUTION Contact with gasoline may cause skin irritation with prolonged or repeated contact. Wearing gloves constructed of nitrile, neoprene, or PVC are recommended when in close contact with gasoline. Chemical protective clothing should also be worn. Longterm, repeated exposure to gasoline may cause skin cancer. In case of contact with skin, remove contaminated clothing. Wash contaminated areas thoroughly with soap and water or waterless hand cleanser. Obtain medical attention if irritation or redness develops. 2.10.6 Storage Precautions CAUTION Keep away from flame, sparks, excessive temperatures, and open flame. Keep tank fill port closed because an empty tank may contain explosive vapors. Do not pressurize, cut, heat, weld, or expose tanks to sources of ignition. Store the tank in a well-ventilated area. Avoid storage near incompatible materials. 2.11 BIODIESEL Biodiesel is a fuel made from vegetable oil or animal fat that has been processed to meet the requirements of ASTM D6751 standard. Unprocessed or recycled vegetable oils are not biodiesel. Biodiesel is often blended with petroleum diesel fuel. When blended, the resulting fuel is known by the percentage of biodiesel in the blend; ie. a 20% biodiesel blend with 80% petroleum diesel is known as B20. Pure biodiesel is B100. Blends with 20% biodiesel or less (B1-B20) are generally treated like petroleum diesel fuel. B100 (100% biodiesel) that meets ASTM D6751 has a “gel” point of 38°F (3.3°C). In some situations, tank and pipeline heaters may be needed to keep the temperature of the B100 above 40°F. Biodiesel has scrubbing and cleaning properties that tend to loosen rust, varnish, and dirt in storage tanks, piping, and equipment. The resulting debris can clog filters and screens, or damage equipment. It is important to take precautions to prevent problems when first using biodiesel. The shelf life of biodiesel is six months for best performance. Microbial growth may occur if biodiesel is stored for longer periods. NOTICE 2.12 U.S. FEDERAL, STATE, AND LOCAL REGULATORY INFORMATION SAFETY INSTRUCTIONS Diesel fuel is on the EPA TSCA Inventory. Any spill or uncontrolled release of this product, including any substantial threat of release, may be subject to federal, state and/or local reporting requirements. This product may also be subject to other regulations at the state and/or local level. Always consult the regulations applicable to your area prior to operation. 2.12.1 SPCC Program The goal of the Spill Prevention, Control, and Countermeasure (SPCC) program is to prevent oil spills into navigable waters and adjoining shorelines. The program requires farms with oil storage to have a spill prevention plan in place. SPCC applies to farms which store, transfer, use, or consume oil or oil products, including diesel fuel or gasoline, and store more than 1,320 U.S. gallons in aboveground containers. There are multiple options for SPCC Plans, depending on the type of farming operation. For specific information, visit: http://www.epa.gov/emergencies/content/spcc/ spcc_ag.htm. The standard pump and meter are not compatible with biodiesel fuel blends greater than 20% (B20). Damage to the seals will occur. For fuel with more than 20% biodiesel, use a pump and meter specifically designed for biodiesel fuel blends. 17 2.13 SIGN-OFF FORM Meridian Manufacturing Inc. follows the general Safety Standards specified by the American Society of Agricultural Engineers (ASAE) and Occupational Safety and Health Administration (OSHA). Anyone who will be operating and/or maintaining the Meridian Manufacturing Inc. Fuel Tank must read and clearly understand ALL safety, operating, and maintenance information presented in this manual. Make these periodic reviews of SAFETY and OPERATION a standard practice for all of your equipment. We feel an untrained operator is unqualified to operate this equipment. A sign-off sheet is provided for your recordkeeping to show that all personnel who will be working with the equipment have read and understand the information in the Operator’s Manual and have been instructed in the operation of the equipment. Do not allow anyone to operate this equipment until such information has been reviewed. Annually review this information. SIGN-OFF FORM Date 18 Employee’s Signature Employer’s Signature 3. SAFETY SIGNS 3.1 GENERAL INFORMATION 3.3 DECAL LOCATIONS The types of safety signs and locations on the fuel tank are shown in the following pages. Good SAFETY AWARENESS requires that you familiarize yourself with the various safety signs, the type of warning and the area, or a particular function related to that area. 1. AR N I NG 7 If safety signs have been damaged, removed, become illegible, or parts replaced without signs, new signs must be applied. 6 8 2. Replacement parts that displayed a safety sign should also display the current sign. MMG-00977 3. Replacement safety signs (labels) are available from your authorized Dealer Parts Department or the factory at no cost. 3.2 HOW TO INSTALL SAFETY SIGNS 1. Be sure that the installation area is clean and dry. 2. Be sure the temperature is above 50°F (10°C). 5 1 3. Determine the exact position before you remove the backing paper. 4 4. Remove the smallest portion of the split backing paper. 3 5. Align the sign over the specified area and carefully press the small portion with the exposed sticky backing in place. 2 MMG-00978 6. Slowly peel back the remaining paper and carefully smooth the remaining portion of the sign in place. 7. Small air pockets can be pierced with a pin and smoothed out using a piece of sign backing paper. 19 1. Danger - Fire Hazard. (#20048) 4. UL Approval Plate, Secondary Containment (#18438). 5. Information Sign. (#19056) THIS TANK IS INTENDED FOR STATIONARY INSTALLATION ONLY HD12 6. Information Sign. (#20105) 2. Serial Number Decal. (#19984) 7. Information Sign. (#17747) 6720110948768 Storm Lake, IA 50588 8. Information Sign. (#12844) 3. Manufacturing Location. 20 19058 3.4 EMERGENCY VENT SAFETY SIGN Each fuel tank is equipped with emergency tank vents. These emergency vent(s) are designed for use on above ground storage tanks, as a code requirement that helps prevent tanks from becoming over-pressurized or rupturing if exposed to fire. Attach the warning tag to the fill cap with the supplied tie cable. 21 4. TANK LABELING 4.1 GENERAL INFORMATION In addition to the safety signs that are supplied on the tank, states generally require permanent tank markings indicating the product stored and system specifications. Check with your local permitting authority for the requirements that apply to your installation. Markings that are commonly required include: 1 1. The petroleum product stored in the tank (diesel, gasoline, No. 2 fuel oil, used oil for recycling, etc.) 2. The safe fill volume or fill height. This level corresponds to the product level that will activate the high level alarm installed on the tank. 3. Lettering such as “FLAMMABLE - KEEP FIRE AND FLAME AWAY”. 4. The appropriate national fire rating system symbol as established by NFPA-704, Identification of Fire Hazards and Materials (known as the NFPA 4-color hazard identification symbol). The NFPA decal, also known as the hazard identification system, consists of a diamond shape symbol that provides emergency response personnel with information concerning the health hazard, fire hazard, reactivity hazard and any specific hazard the contents of the tank may exhibit. These hazards are represented using a standard rating system to ensure consistency. Therefore, a tank storing diesel fuel will always display the same hazard codes. The appropriate symbols for diesel fuel and gasoline are shown below. 1 2 NFPA Diesel Fuel Symbol. 22 0 NFPA Gasoline Symbol. 5. SPECIFICATIONS 5.1 OVERALL DIMENSIONS D H MMG-00997 5.2 SPECIFICATIONS Volume (gal) (liters) Diameter (D) Height (H) Part No. 4000 15140 8’ 12’ 64056 5000 18930 8’ 15” 64068 8500 32180 12’ 12’ 64045 10000 37850 12’ 14’ 64044 12000 45420 12’ 16’ 64040 15000 56780 13’ 15’ 64080 23 6. TANK COMPONENTS The Fuel Tank is designed to store gasoline or diesel fuel for agricultural applications. (9) Fuel Tank Anchor Points. (1) Fuel Tank. (2) Tank Vent. (3) Tank Level Gauge. (4) Fuel Shutoff Valve. (5) Top Mounted fuel pump. 7 6 (10) Top Mounted Fuel Pump. MMG-00985 (6) Emergency Vent. (7) Manway. (11) Fuel Dispenser and Meter. (8) Remote Fill Box. 24 (12) Tank Level Gauge. (16) Interstitial Space Sight Glass. (13) Hose Reel. (14) Fuel Shutoff Valve (15) Lifting Lug. 25 7. INSTALLATION 7.1 SITE SELECTION The tank must be sited such that it is accessible to employees, fuel delivery drivers, and emergency responders, but not near traffic patterns. It should be located a minimum of 50 feet away from buildings, creeks, roads, wells, power lines, grain bins, and property lines; 100 feet from residences. Do not place the tank where welding and cutting torches are likely to be used. Flat ground is required so that a spill or leak will not run downhill toward creeks, ditches, tiles, or drains. The area under and around the tank should be sufficiently impermeable to retain a discharge until cleanup can occur. 7.2 PERMITTING To install an aboveground fuel storage tank, a permit is usually required by local authorities, which may include the local Fire Department and/ or Building Department. The following information is typically required to be submitted: • Size and type of tank • UL listing of the tank • What the tank will be used for • Location of the tank • Containment being provided • Pump and monitoring equipment being used • Location of the fill/vent piping and containment being provided 7.3 MOUNTING FUEL TANK TO CONCRETE PAD The fuel tank should be securely anchored to a reinforced concrete pad at least six inches thick using four 1/2” anchor bolts to prevent shifting or tipping when full or empty. 26 7.4 ELECTRICAL WIRING PROCEDURE FOR FUEL PUMP WARNING The fuel pump is designed to be installed in association with volatile hydrocarbon liquids such as gasoline and diesel fuel. Installing or working on this equipment means working in an environment in which these highly flammable liquids and vapors may be present. Working in such a hazardous environment presents a risk of severe injury or death if OEM instructions and standard industry practices are not followed. Read and follow all instructions thoroughly before installing or working on this, or any other related equipment. Electrical wiring should be performed ONLY by a licensed electrician in compliance with local, state, and national electrical code NEC/ANSI/NFPA 70, NFPA30, and NFPA 30A, as appropriate to the intended use of the pump. The fuel tank may be equipped with a top mounted or submersible fuel pump. The pump should be wired according to the appropriate OEM installation procedure. The wiring should be performed by a licensed electrician in compliance with local, state, and national electrical codes. 8. OPERATION 8.1 OPERATING SAFETY 5. DANGER The Fuel Tank is only intended for use with gasoline or diesel fuel. DO NOT use this tank with any other flammable liquid. Storing any other flammable or combustible liquid could result in a fire and explosion, causing serious injury or death. 6. Manually control the nozzle valve throughout the filling process. Keep your face away from the nozzle or fuel tank opening. 7. Avoid prolonged breathing of fuel vapors. 8. Keep fuel away from your eyes and skin because it may cause irritation. 9. Fill fuel tanks no more than 95 percent full to allow for expansion. Replace and tighten the tank’s fill port cap. WARNING To prevent personal injury or even death, be sure you read and understand all of the instructions in this manual and other related OEM equipment manuals! The Fuel Tank, if not used and maintained properly, can be dangerous to users unfamiliar with its operation. Do not allow filling, refueling, or maintaining of this tank until the user has read this manual and has developed a thorough understanding of the safety precautions and functions of the tank. DO NOT modify or use this tank for any application other than which it was designed. Tanks that are filled or used improperly or by untrained personnel can be dangerous; exposing the operators and/or bystanders to possible serious injury or death. The improper use, handling, or storage of gasoline or diesel fuel can be dangerous. Never fill a hot engine. DO NOT fill the engine’s fuel tank near an open flame, while smoking, or while the engine is running. Clean up any fuel spills immediately. 8.2 FIRE EXTINGUISHER A user-supplied fire extinguisher is required by OSHA regulation. The fire extinguisher must be located not less than 25 feet, nor more than 75 feet from the fuel tank. Follow the manufacturer’s instructions to periodically check and maintain the fire extinguisher. 8.3 PRE-OPERATION CHECKS 1. 2. 3. 4. Make sure that anyone who will be using the Fuel Tank or working on or around the tank reads and understands all the operating, maintenance, and safety information in the operator’s manual. Keep all bystanders, especially children, away from the equipment when filling the tank or refueling machinery. 1. Review the OEM instructions provided with all equipment used on the fuel tank for operating and safety precautions. 2. Check the operation of the Normal and Emergency vents. 3. Make sure that a fire extinguisher is available. Keep working area clean and free of debris to prevent slipping or tripping. Know and follow applicable national, state, and local safety codes concerning safe handling of gasoline or diesel fuel. 27 8.4 FILLING THE FUEL TANK WITH FUEL 2. Connect the ground cable to the tank. 3. Check the tank liquid level and confirm that the planned delivery load will fit into the tank. Verify the product in the tank matches the product being delivered. 4. Connect the delivery hose to the hose coupling. 5. Open the valve on delivery truck. 6. Open the valve on the tank fill coupling. 7. Start the delivery pump. 8. Stop the delivery pump when tank has reached the predetermined fill level. 1. Before filling or using the fuel tank, follow all the safety recommendations. Inspect the emergency vent prior to filling the tank or fueling equipment for the following: a. Clogged or restricted vents that could cause damage to the tank. b. Dust, debris, ice, snow, or other contaminants that could clog or restrict the vent. c. In freezing weather conditions, inspect the vents immediately before filling the tank or fueling equipment. d. Do not fill or use fuel from the tank unless you are certain that the tank vents will operate correctly. 9. Close the valve on delivery truck. 10. Close the valve on the tank fill coupling. 11. Disconnect the delivery hose from the tank fill coupling. 12. Disconnect the ground cable. 8.4.1 Filling the Fuel Tank Using the Optional Remote Fill Box 1. Connect the ground cable to the tank. 2. Check tank liquid level and confirm that the planned delivery load will fit into tank. Verify the product in the tank matches the product being delivered. 3. Unlock and open the door of the remote fill box. SAFETY INSTRUCTIONS Never obstruct the emergency vent by placing an object on top of the cap. 28 4. Verify that the drain plug is sealed and properly tightened. 8.5 FILLING MACHINERY FROM THE FUEL TANK 5. Connect the delivery hose to the hose coupling inside the remote fill box. 1. Position the equipment near the fuel tank. 2. Reset the fuel meter to “0”. 6. Open the valve on delivery truck. 7. Open the large ball valve inside the remote fill box. 8. Start the delivery pump. 9. Stop the delivery pump when tank has reached the predetermined fill level. 10. Close the valve on delivery truck. 11. Close the large ball valve inside the remote fill box. 12. Disconnect the delivery hose from the fill connection inside the remote fill box. 3. Open the fuel shutoff valve. 13. Remove any liquid spilled inside the remote fill box by using the hand pump, bailing, and/or mopping with absorbent pads. Note: Liquid spilled inside the remote fill box should not be drained to the ground or atmosphere. All hazardous materials need to be properly disposed of according to local, state, or federal regulations. 14. If using the hand pump, open the small ball valve in the hand pump line and actuate the pump. When finished hand pumping the spilled liquid, close the small ball valve. Use absorbent pads to mop up any residual liquid. 15. Close and lock the door. 16. Disconnect the ground cable. 4. Remove the nozzle. CAUTION Once the pump is turned ON, the fuel hose is pressurized and will pump fuel. Do not squeeze the handle on the fuel nozzle until it is inside the fuel tank of the machinery being refueled. 29 5. Move the ON/OFF lever to the “ON” position to apply power to the pump. 10. Pad lock the pump nozzle for added security. With the pump turned off, and the nozzle in the stored position, a pad lock can be inserted through the locking link and the nozzle handle opening. This configuration prevents the nozzle from being removed from the pump. NOTICE The pump motor is equipped with thermal overload protection. If the motor overheats, it will automatically shut off to prevent internal damage. If this happens, TURN THE PUMP OFF! When the motor cools, it will restart without warning if the power is on. 6. Fuel the equipment. Release the nozzle when the desired amount of fuel has been dispensed. Note: To minimize static electricity build up, keep the fill nozzle in contact with the equipment being filled during the filling process. 7. Move the ON/OFF lever to the “OFF” position to turn off the pump. 8. Remove the dispensing nozzle from the equipment being fueled and store it on the dispenser. 9. Close the fuel shutoff valve. 30 9. MAINTENANCE 9.1 GENERAL SAFETY WARNING Fire Hazard – Death or serious injury could result from a fire or explosion due to spilled fuel. Fall Hazard – Death or serious injury could result from a fall. Always use proper safety equipment when working at the top of the tank. Dangerous Fumes Hazard – There may not be breathable air inside the tank. Death or serious injury could result from asphyxiation. Do not enter the tank for any reason. 1. Good maintenance is your responsibility. Poor maintenance is an invitation for trouble. 2. Always use personal protection devices, such as eye, hand, and hearing protectors, when performing any service or maintenance. 3. 4. 5. OEM Where replacement parts are necessary for periodic maintenance and servicing, genuine factory replacement parts must be used to restore your equipment to the original specifications. The manufacturer will not be responsible for injuries or damages caused by use of unapproved parts and/or accessories. A fire extinguisher and first aid kit should be readily accessible while performing maintenance. When completing a maintenance or service function, make sure all safety shields and devices are installed before placing the unit in service. 9.3 EMERGENCY VENT 9.3.1 Safety SAFETY INSTRUCTIONS The following safety instructions are provided to help prevent injury or limit equipment damage. The emergency vent should only be installed on fuel tanks built and tested in accordance to industry standards such as UL142, NFPA 30 & 30A, and API 650. The emergency vent must be installed in accordance with all applicable local, state, and federal laws. The emergency vents only provide emergency pressure relief and must be used in conjunction with a normal vent or pressure vacuum vent. For your safety, it is important to follow local, state, federal, and/or OSHA rules that apply to working around the storage tank and fueling area. Use all personal protective equipment required for working in the specific environment. When installing an emergency vent, the tank could be under pressure. Vapors may be expelled from tank vents while performing maintenance. Vapors could catch fire or cause an explosion. Avoid sparks, open flame, or hot tools when working on vents. 9.3.2 Inspection Annual inspection, and immediate inspection during freezing conditions, by someone familiar with the proper operation of the storage tank vents, is required to insure venting devices are functioning properly before filling or unloading a tank. 1. Lift the cover of the vent all the way up and lower it back down onto the body several times. The cover must move freely for the vent to work properly. Replace the vent if sticking or binding occurs. 9.2 GENERAL MAINTENANCE Inspect and touch up the paint finish on the tank as needed. Damage to the paint promotes rust, which weakens the tank. Remove vegetation growing around and beneath the tank. Vegetation promotes rust, can disguise a spill, and can cause fire and safety issues. 31 2. Inspect the vent, including the seal area, for dust, debris, snow, or ice. Remove any obstruction that would prevent movement of the cap. 3. Inspect all vent components and surfaces for damage, corrosion, or excessive wear. If any is found, replace the vent. 4. Inspect the vent warning tag located near the tank fill port. If the tag is damaged or difficult to read, contact Morrison Bros. Co. at (800) 553-4840 for a free replacement tag. 7. Thread the vent onto the pipe avoiding excessive torque, which may damage the vent. Note: There should be no reduction of pipe size between the storage tank and the emergency vent. 8. Attach the included warning tag where it will be visible to the operator filling the tank or fueling equipment. 9.4 ELECTRIC FUEL PUMP WARNING DO NOT open or attempt to repair the motor on the fuel pump. If the pump is damaged or not working, refer to the Warranty procedures for repair or replacement of the pump. Disassembling the motor case can compromise the integrity of the explosion-proof construction and will void any existing warranty and certification (UL listing). Make sure all power to the pump is turned OFF prior to performing any service or maintenance. 9.3.3 Replacement of Emergency Vent 1. Inspect the replacement unit for shipping damage. Do not install the unit if damage is found. 2. Check the vent openings for foreign matter such as packaging material. Remove any debris or obstructions. 3. Inspect the sealing surfaces between cover and body. Remove any dust or debris. 4. Verify the vent cover is moving freely before and after installation into the tank. 5. Do not paint the vent unless necessary. If painting, extreme caution must be used to make sure the paint does not inhibit proper operation of the vent. 6. Apply a fuel resistant, non-hardening, antiseize sealant to the threads on the riser pipe. SAFETY INSTRUCTIONS Do not use Teflon® tape to seal the threads. 32 9.5 HOSE REPLACEMENT When replacing the fuel hose, use only OEM hose. Using other vendors of fuel hose may allow static electricity build up. Use only static wire conductive hose when pumping flammable fluids. 9.6 FUEL METER 9.6.1 Calibration For accurate measurement and to prevent meter damage, the meter and piping must always be filled with liquid and be free of air. Typically, fuel meters can be calibrated for either U.S. gallons or liters. Calibration is normally required before installation, after disassembly, after wear due to normal operation, or when changing from gallons to liters. 1. If equipped, verify whether the meter installed on the tank is factory calibrated for U.S. gallons or liters. 2. Select a container of known volume; a five gallon container or larger should be used. 3. Fill a container to a known volume. 4. Check the reading on the meter. If the meter is incorrect, adjust the calibration screw to obtain either more or less fuel. Follow the OEM instructions for the specific meter being used. • A check of the interstitial space (i.e., the space between the walls) of a double-walled a tank for accumulation of fuel or water. 5. Repeat Steps 3 and 4 until the calibration is complete. • A n inspection for accumulation of water or fuel in the containment area. 9.6.2 Maintenance • A check of the spill bucket to make sure it is clean and functional. • C onfirmation that all drain valves are securely closed when not in use. The fuel meter should operate maintenance free. However, certain liquids can dry out while in the meter housing, causing the meter to stop functioning. If this occurs, the meter should be thoroughly cleaned, as per instructions below. • A check of normal and emergency vents for obstructions or restrictions that could interfere with proper operation. 1. Remove the meter from the pump. • A n investigation of conditions that may pose a fire, safety hazard, or environmental hazard. 2. Pour a flushing fluid into the meter and allow it to penetrate the internal components. 3. If possible, pump the flushing fluid through the meter. 4. If the flushing procedure does not fix the problem, the meter should be repaired by an authorized dealer or replaced. Disassembly of the meter is not recommended. 5. Calibrate the meter following the calibration instructions in this section. 9.6.3 Storage If the meter is to be stored for an extended period of time, clean it thoroughly to help protect the meter from internal damage. 9.7 TANK INSPECTION The tank should be thoroughly inspected regularly, and whenever a repair is made. Documentation of the inspections should be retained for two or three years (federal regulations). Deficiencies noted during the inspection should be corrected as soon as possible. • A check of auxiliary equipment for operational malfunctions. • A search for evidence of a release from the tank system. • Confirmation that spill kits are immediately accessible. 9.8 REMOVAL FROM SERVICE Removing a tank from service may be subject to regulation. If an Aboveground Storage Tank has remained out of service for a year or more, many states require owners to maintain and monitor the tank, declare the tank inactive, or remove it. If the tank is declared inactive, remove all substances from the AST system (including pipes) and completely clean the inside to a vapor-free condition. Secure the tank by bolting and locking all valves, as well as capping all gauge openings and fill lines. Clearly label tanks with the date and the words “Out of Service.” Samples may be required when removing tanks to determine if any contamination has occurred. Most States require out-of-service tanks to be inspected and meet leak detection requirements before they are put back into service. The inspection should include at least the following: • A visual examination of the tank system for deterioration, including but not limited to the tank and its coating, hoses and fittings, pipes, foundation, and drainage mechanism. • A dipstick inspection of tank contents, at the lowest point, for the presence of water. 33 9.8.1 Tank Inspection Checklist This chart should be copied and filled out as inspections and maintenance operations are performed on the tank. Refer to the Maintenance section for additional instructions. Date Inspected by Location Is there any deterioration of the tank, tank coating, pipes, valves, foundation, drainage mechanism, or safety equipment? If yes, specify below or on the back of this document. Yes No Does the hose show evidence of deterioration? Yes No Is the fire extinguisher fully operational? Yes No Is there any water at the lowest possible point inside the primary tank? State below if water was discovered and removed. Yes No Is there any evidence of liquid (fuel or water) in the interstitial space of a doublewalled tank? Yes No N/A Are all drain valves secured in the closed position? Yes No N/A Is there any accumulation of water or fuel in the containment area? State details of remedial action (absorption and disposal of fuel, or removal of water) below or on a separate sheet of paper. Yes No N/A Is the spill bucket clean and functional? Yes No N/A Are there any obstructions or restrictions that prevent proper function of the normal and emergency vents? If yes, specify below or on a separate sheet of paper. Ensure that the emergency vent moves freely. Yes No Is a complete spill kit easily accessible? Yes Yes Yes No No No Are there any conditions that may pose fire, safety, or environmental hazards? If yes, specify below or on a separate sheet of paper. Yes No Are there any operational malfunctions of auxiliary equipment? Is there any evidence of a fuel release? Comments (Continue comments on separate sheet of paper if necessary.) Correct any deficiencies immediately. Keep this checklist on file. 34 10. OEM LITERATURE ! Failure to follow any or all of the warnings and instructions in this document could result in a hazardous liquid spill, which could result in property damage, environmental contamination, fire, explosion, serious injury or death. Maintenance Monthly inspection, and immediate inspection during freezing conditions, by someone familiar with the proper operation of the storage tank vents, is required to insure venting devices are functioning properly before filling or unloading a tank. ! WARNINGS • Fire Hazard – Death or serious injury could result from spilled liquids. • Clogged or restricted vents could cause damage to tanks and piping releasing liquids which could catch fire. • Dust, debris, freezing rain, freezing condensation or other contaminants could clog or restrict the vents. • In freezing conditions, inspect the vents immediately before filling or unloading a tank. • Follow your employer’s instructions for making sure vents are not clogged or restricted. • You must be trained to inspect the vents. Stop now if you have not been trained. • Do not fill or unload from a tank unless you are certain that the tank vents will operate correctly. • For your safety, it is important to follow local, state, federal and/or OSHA rules that apply to working inside, above, or around the storage tank and piping area. Use all personal protective equipment required for working in the specific environment. • Tanks could be under pressure. Vapors could be expelled from tank vents, piping, valves or fittings while performing maintenance. Vapors could catch fire or cause an explosion. Avoid sparks, open flame, or hot tools when working on vents. Steps 1. Lift the cover of the vent all the way up and lower back down onto the body several times. The cover must move freely for the vent to work properly. 2. Replace the unit if sticking or binding occurs during step 1 above. 3. Inspect the vent, including the seal area, for dust, debris, snow or ice. Remove any that is found. 4. Inspect all vent components and surfaces for damage, corrosion or excessive wear. If any is found replace the vent. 5. Inspect the vent warning tag located near the tank fill and offloading area. If the tag is damaged or difficult to read, contact Morrison Bros. Co. at (800) 553-4840 for a free replacement tag. 10.1 EMERGENCY VENT CAP For any questions concerning the emergency vent cap, refer to the OEM literature that was provided with the fuel tank. ! Failure to follow any or all of the warnings or instructions in this document could result in a hazardous product spill, which could result in property damage, environmental contamination, fire explosion, serious injury or death. Morrison Bros. Co. Dubuque, IA Phone: 800-553-48402 244 Emergency Vents Installation & Maintenance Instructions The 244 Series Emergency Vent is designed for use on aboveground storage tanks, as a code requirement that helps prevent tanks from becoming over-pressurized or rupturing if exposed to fire. ! Failure to follow any or all of the warnings or instructions in this document could result in a hazardous product spill, which could result in property damage, environmental contamination, fire explosion, serious injury or death. 2 Morrison Bros. Co. - Dubuque, IA - 800-553-4840 244---2110 PP Installation ! Warnings • Fire Hazard – Death or serious injury could result from spilled liquids. • Install only on shop fabricated atmospheric tanks built and tested in accordance to industry standards such as UL142, NFPA 30 & 30A, and API 650. • Install in accordance with all applicable local, state, and federal laws. • 244 Series vents only provide emergency pressure relief and must be used in conjunction with a normal vent or pressure vacuum vent. • 244 Series vents as well as normal vents and pressure vacuum vents must be properly sized and selected for each specific tank application. • For your safety, it is important to follow local, state, federal and/or OSHA rules that apply to working inside, above, or around the storage tank and piping area. Use all personal protective equipment required for working in the specific environment. • Tanks could be under pressure. Vapors could be expelled from tank vents, piping, valves or fittings while performing installation. Vapors could catch fire or cause an explosion. Avoid sparks, open flame, or hot tools when working on vents. 10.2 SUBMERSIBLE FUEL PUMP Franklin Fueling Systems 3760 Marsh Rd. Madison, WI 53718 Tel: (608) 838-8786 Fax: (608) 838-6433 Steps 1. Inspect unit for shipping damage. Replace unit if damage is found. 2. Check vent openings for foreign matter such as packaging material. Remove any that is found. 3. Inspect brass to brass or Viton o-ring sealing surfaces. Remove any dust or debris. 4. Insure mounting pipe/connection is in the vertical (plumb) position. 4. Inspect sealing surfaces between cover and body. Remove any dust or debris. 5. Verify vent cover is moving freely before and after installation into the system. 6. Do not paint vent unless necessary. If painting, extreme caution must be exercised to make sure that the paint does not inhibit proper vent operation. 7. Follow appropriate mounting instructions below. Threaded Connection 1. Apply a fuel resistant, non-hardening, anti-seize sealant to the male threads on the riser pipe or vent body. Do not use Teflon® tape. 2. Thread vent onto pipe avoiding excessive torque, which may damage vent. Flange Connection 1. Place a gasket between the flange faces. 2. Gradually tighten flange bolts in a crisscross pattern. 3. Bolting should be tightened sufficiently to prevent leakage and loosening of the joint. Note: There should be no reduction of pipe size between the storage tank and the Fig. 244 Series Emergency Vent. Important: Install the included warning tag where it will be visible to the operator filling or unloading the tank that is fitted with this vent. 1 Morrison Bros. Co. - Dubuque, IA - 800-553-4840 244---2110 PP 35 10.3 FUEL PUMP AND METER Fill-Rite Electric Fuel Pumps Tuthill Corporation 8825 Aviation Drive Ft. Wayne, IN 46809 Toll Free: 800-634-2695 10.4 TANK LEVEL GAUGE OPW Corporate Headquarters 9393 Princeton-Glendale Road Hamilton, Ohio, USA 45011 Tel: (800) 422-2525 Fax: (800) 421-3297 Owners Installation, Operation, and Safety Manual Remote Dispensing Cabinet 902V Series Cabinet Dispenser Models FR902R, non-UL, gallon FR902LR, non-UL, liter FR902RU, UL, cUL listed, gallon FR902LRU, UL, cUL listed, liter 1 36 11. FR-313 FUEL PUMP TROUBLESHOOTING CHART PROBLEM Fuel pump will not prime. Fuel pump low capacity. Fuel pump runs slowly. Fuel pump stalls, fuse blows, or circuit breaker trips repeatedly. Fuel pump motor overheats. CAUSE SOLUTION Suction line is damaged. Check for leaks in the suction line. Fuel level in tank is below the pump inlet. Maintain the fuel level above the height of the fuel pump inlet. Bypass valve open. Valve must move freely and be free of debris. Contact OEM for cleaning and/or repair options. Vanes sticking. Vanes and slots may have nicks, burrs, or wear. Contact OEM for repair options. Excessive rotor or vane wear. Rotor and vane wear or damage. Contact OEM for repair options. Outlet blocked. Check pump outlet, hose, nozzle, and filter for blockage. Vapor lock. Check breather on top of tank for obstruction. Excessive dirt in screen. Remove and clean screen. Suction line problem. Check suction line for leaks or restrictions or air leaks (not airtight). Bypass valve sticking. Valve must move freely and be free of debris. Contact OEM for cleaning and/or repair options. Vanes sticking. Vanes and slots may have nicks, burrs, or wear. Contact OEM for repair options. Excessive rotor or vane wear. Rotor and vane wear or damage. Contact OEM for repair options. Hose or nozzle damage. Replace hose or nozzle. Plugged filter. Replace filter. Low fluid level. Fill tank. Incorrect Voltage. Check incoming line Voltage while pump is running. Vanes sticking. Vanes and slots may have nicks, burrs, or wear. Contact OEM for repair options. Wiring problem. Check for loose connections. Motor problem. Contact OEM for replacement options. Bypass valve sticking. Valve must move freely and be free of debris. Contact OEM for cleaning and/or repair options. Low Voltage. Check incoming line Voltage while pump is running. Excessive rotor or vane wear. Rotor and vane wear or damage. Contact OEM for repair options. Debris in pump cavity. Clean debris from pump cavity. Fuel may be too viscous (too thick). Viscous fluids can only be pumped for short periods of time (less than 30 minutes). Clogged screen. Remove and clean screen. Restricted suction pipe. Remove restriction. Motor failure. Contact OEM for replacement options. Pump rotor lock-up. Contact OEM for cleaning and/or repair options. 37 PROBLEM Fuel pump does not operate. Fuel pump leaks. CAUSE SOLUTION No power. Check incoming power source. Switch failure. Replace switch with OEM parts. Motor failure. Contact OEM for replacement options. Thermal protector failure. Contact OEM for replacement options. Incorrect or loose wiring. Repair wiring. Bad O-ring gasket. Replace all O-ring gaskets. Dirty shaft seal. Clean seal and seal cavity. Bad shaft seal. Replace seal. Incompatible fluid. Do not pump any fluid other than gasoline or diesel fuel. Loose fasteners. Tighten fasteners. Calibration incorrectly set. Check calibration and recalibrate if necessary. Air in product. Check for and repair air leaks. Measuring chamber or gears could be sticking. Clean or replace the internal metering components. Fuel meter shaft seal leakage. Dirty or damaged seals. Clean O-ring and seat area or replace seal. Fuel meter gasket leakage. Loose gasket. Tightening joints. Damaged gaskets. Replace damaged gaskets. If caused by high-pressure, install pressure relief valve to allow high-pressure to bleed back to tank. Meter chamber obstructed. Clean clogged meter chamber, clean or replace screens and filters in piping. Fuel meter counter is reading high or low. Fuel meter low flow capacity. 38 12. WARRANTY STATEMENT Limited Materials and Workmanship Warranty For Fuel Tanks Meridian Manufacturing Inc. (hereinafter referred to as the Manufacturer) hereby warrants the Fuel Tank(s) sold by it to be free from any defect in material or workmanship under normal use and service for a period of one (1) year from the date of shipment. The Manufacturer’s obligation under this warranty shall be limited to the repair or replacement only, FOB the original point of shipment, of any defective parts or portions of the fuel tank or accessories manufactured by Meridian. Any warranty claim must be reported to the Manufacturer within one (1) year from the date of shipment. THIS WARRANTY IS SUBJECT TO THE FOLLOWING LIMITATIONS, PROVISIONS AND CONDITIONS: 1. This warranty does not apply: a) To any product sold by the Manufacturer where it is used in areas exposed to corrosive or aggressive conditions including salt water, acids, alkaloid, ash, cement dust, animal waste or other corrosive chemicals from either inside or outside the bin. b) For failures or defects arising out of damage during shipment or during storage on site. c) To materials replaced or repaired under this warranty except to the extent of the remainder of the applicable warranty. d) To damage resulting from misuse, negligence, accident or improper site preparation by others. e) If the product has been altered or modified by others. f) If in the case of coating failures the failure is the result of damage, lack of proper maintenance or failure to remove road salt or other contaminants that may have come in contact with the bin surface. g) To loss of time, inconvenience, loss of material, down time or any other consequential damage. h) For a function that is different than original designed intent. 2. The obligation of the Manufacturer under this warranty shall not arise unless the Manufacturer is notified and this warranty is presented together with a written statement specifying the claim or defect within thirty (30) days after the failure is first detected or made known to the owner and within one (1) year from the shipment date. The Manufacturer in its sole discretion shall determine if the claim is valid and whether correction of the defect or failure shall be made by repair or replacement of the materials. 3. The coating warranty is based on the manufacturer’s performance specification for Polyester Powder finishes and does not include repair of minor blemishes or rusting that is normally part of the general maintenance of the fuel tank. This warranty does not cover excessive wear on interior coatings. See attachment for full Performance Specification details on Polyester Powder Finishes. 4. The obligation of the Manufacturer hereunder extends only to the original owner and to the Meridian dealer to whom the materials may have been initially sold. This warranty shall not be subject to any assignment or transfer without the written consent of the Manufacturer. 5. The customer shall acknowledge that it has made its own independent decision to approve the use of the supplied materials and also the specific fabrication and construction procedures utilized to complete the fuel tank, and has satisfied itself as to the suitability of these products for this particular application. 6. The foregoing sets forth the only warranties applicable to said materials and said warranties are given expressly and in lieu of all other warranties, expressed or implied, statutory or otherwise, of merchantability or fitness for a particular purpose and all warranties which exceed or differ from said warranties herein are disclaimed by the Manufacturer. 7. The owners sole and exclusive remedy against the Manufacturer shall be limited to the applicable warranty set forth herein and the endorsements, if any, issued together with this document and no other remedy (including but not limited to the recovery of assembly or disassembly costs, shipping costs, direct, incidental, special, indirect or consequential damages for lost profits, lost sales, injury to person or property or any other loss, whether arising from breach of contract, breach of warranty, tort, including negligence, strict liability or otherwise) shall be available to the owner or Meridian Dealer or any other person or entitles whether by direct action or for contribution or indemnity or otherwise. 8. The financial obligation of the Manufacturer under this warranty shall be limited to the repair or replacement of the product as originally supplied and in no event shall exceed the original cost of the product supplied. 9. The Manufacturer shall not have any obligation under any warranty herein until all accounts for materials, installation and erection of the said product thereof and for labor and other work performed by the Manufacturer or its dealers have been paid in full by the owner. Warranty Claim Procedure 1. Registering product with Meridian Manufacturing. 2. Contact the dealer unit was purchased from upon discovery of any defects. 3. A completed warranty claim form submitted by dealer to Meridian warranty representative for review and course of action. 4. Warranty repair work will only be performed by Meridian, the dealer or an approved representative. No warranty work completed prior to approval. Failure to follow procedure may affect any or all reimbursement. 5. Claims will be adjudicated at the sole discretion of the manufacturer and in accordance with the terms and conditions of the applicable limited warranty. 6. A complete list of warranty procedures can be procured from the Warranty Department or found in your owner’s manual. Effective July 1, 2009 39 13. PARTS The following pages contain a list of serviceable parts and optional equipment for the Fuel Tank. Parts are available from your authorized Dealer Parts Department. 3 4 5 1 2 MMG-00987 Item Qty. 1 1 2 1 Part No. 64056 64068 64045 64044 64040 64080 18794 3 2 18313 Vent, Emergency 4 2 18005 8” ANSI Gasket, Flexitallic 5 2 20029 Decal, MMG Bin Decal 70” LG 40 Description Tank, Double Wall, 4,000 gal. Tank, Double Wall, 5,000 gal. Tank, Double Wall, 8,500 gal. Tank, Double Wall, 10,000 gal. Tank, Double Wall, 12,000 gal. Tank, Double Wall, 15,000 gal. Sight Glass, 1-1/2” NPT, Brass 13.1 OPTIONAL EQUIPMENT Tank Size Fill Systems. Double Wall Vertical Tanks 2” Fill System without overfill protection Valve & 10 gal. FS Box 3” Fill System with Overfill Protection Valve & 10 gal. FS Box 4,000 60864 60846 Dispensing Systems. Dispensing System with Dispensing System with 901 Meter, 3/4 HP 35-40 902 Meter, 30-35 GPM GPM Submersible Pump w/ 313 Pump w/ Anti Siphon, Anti Siphon, filter, Nozzle, Suction Stub/Foot Valve, 20’ Hose filter, Nozzle, 20’ Hose 60852 60858 5,000 60865 60847 60853 60859 8,500 60866 60848 60854 60860 10,000 60867 60849 60855 60861 12,000 60865 60847 60856 60862 15,000 60865 60847 60857 60863 Updraft Vent* 3” Updraft Vent with 24” Elevation Pipe 61547** Press/Vac. Vent* 3” Pressure/Vac. Vent Alarm with 24” Elevation Pipe 61548** Gauge OPW Gauge with Tank Chart 61536** Hose Reel Upgrade Hose Reel Upgrade, 1” x 35’ with Mounting Bracket 21496** Flameshield Flameshield Upgrade 61549** *One or the other must be selected. The tank must have one normal vent in order to function. The pressure/vacuum vent also acts as a source of overfill protection. **All tanks. 41 13.2 2” FILL SYSTEM WITHOUT REMOTE FILL BOX 7 8 9 7 8 6 3 5 1 15 9 2 10 7 8 7 13 14 12 4 6 7 Item 1 Qty. 1 2 1 3 1 4 1 5 1 6 2 42 Part No. 50121 50122 50123 50124 10055 17039 10049 10050 10051 10054 17908 18724 11 Description Pipe, 2” Sch 40, 125-5/8” LG (5000, 12000, 15000) Pipe, 2” Sch 40, 101-5/8” LG (10000) Pipe, 2” Sch 40, 89-5/8” LG (4000) Pipe, 2” Sch 40, 77-5/8” LG (8500) Hose, Flex, Braided Fuel, 2” x 24’ LG Hex Reducing Bushing, 3” M to 2” F Drop Tube, 3” x 129-9/16”, (8500) Drop Tube, 3” x 141-9/16”, (4000) Drop Tube, 3” x 153-9/16”, (10000) Drop Tube, 3” x 177-9/16”, (5000, 12000, 15000) DBL Tapped Reducer, 6” to 3”, Sch 40 Nipple, 2” x 4” LG, Sch 40 MMG-00988 Item Qty. Part No. 7 5 18868 Nipple, 1” NPT, 6” Long Description 8 3 18871 Nipple, 2” x 6” LG, Sch 40, Mild Stl 9 2 21024 Union, 2” NPT 10 1 20053 Bushing, 3 x 2 DBL Tapped Reducer 11 1 11224 Ball Valve, 2” Brass 12 1 10052 13 1 18725 14 1 18726 15 1 40024 Valve, Swing Check, 2” Coupler, 2” Camlock, Female NPT - Male Camlock Camlock Dust Cap, Female Alum. Pump, Submersible, FE Petro STP75-VL3-7 13.3 3” FILL SYSTEM WITH REMOTE FILL BOX 7 8 9 6 7 6 13 10 5 14 4 14 9 11 4 2 3 1 12 2 3 MMG-00989 Item Qty. Part No. 1 1 23386 Description 2 4 19569 Bolt, Hex, Flanged, 3/8-16 x 1 UNC 3 4 19564 Nut, Hex, Flanged, 3/8-16 UNC 4 2 18145 Coupler, 3” NPT, Mild Stl 5 1 20633 Valve, Overfill Protection, 3” 6 2 17297 Nipple, 3” x 4” LG, Sch 40 7 2 17296 Elbow, 3” x 90° Sch 40 8 1 17299 Nipple, 3” x 9” LG, Sch 40 9 2 17298 Union, 3” Item Qty. 10 1 Remote Fill Box, 3”, Plumbed 11 1 12 1 Part No. 50116 50117 50118 50119 10110 10111 10112 13 1 10113 10114 18001 14 2 40023 Description Pipe, 3” Sch 40, 69-9/16” LG (4000) Pipe, 3” Sch 40, 105-15/16” LG (5000, 12000, 15000) Pipe, 3” Sch 40, 57-9/16” LG (8500) Pipe, 3” Sch 40, 69-9/16” LG (10000) Hose, Flex, Braided Fuel, 3” x 24’ LG Drop Tube, 3” x 120-15/16” (4000) Drop Tube, 3” x 156-15/16” (5000, 12000, 15000) Drop Tube, 3” x 109-1/16” (8500) Drop Tube, 3” x 133-7/16” (10000) Nipple, 6” x 3-1/8” LG, Sch 40 Bracket, 3” T-Bracket Assembly 43 13.4 DISPENSING SYSTEM WITH SUBMERSIBLE PUMP (4000 - 5000) 2 1 8 19 15 16 7 17 12 18 6 21 2 1 5 7 24 23 22 1 9 10 8 4 3 3 8 11 14 7 8 2 8 13 8 8 7 MMG-00990 Item Qty. Part No. Description Item Qty. Part No. 1 3 17295 Hex Reducing Bushing, 3” M to 2” F 13 1 10057 Meter, Fuel, FR901C 2 3 17198 14 1 10058 3 2 10056 15 1 10059 4 1 50125 Union, 1” Sch 40 Bushing, 3M x 1F x 1F DBL Tapped Reducer Pipe, 1” Sch 40, 36” LG 16 1 50129 Nozzle Kit, Fill-Rite 120NB Pump, Submersible, FE Petro STP75-VL3-7 Pipe, 1” Sch 40, 18-1/2” LG 5 1 Ball Valve, 1” NPT Pipe, 1” Sch 40, 65-1/16” LG (4000) Pipe, 1” Sch 40, 101-1/16” LG (5000) 90° - 1” NPT SS Elbow (4464K16) 17 1 10062 Nipple, 2” NPT, 2-1/2” LG 18 1 10060 19 1 10070 Nipple, 1” NPT, 6” Long Filter Head, 1” NPT For F40 Filter (700ACCF7017) Diesel Filter, - 40 GPM-50 PSI 30 Micron Diesel Nozzle, 1" Ultra Hi-Flow, Green Elbow, 2” NPT x 90° 20 1 21023 21 1 40025 Bushing, 2M x 1F Reducer Valve, Anti-Siphon, 1”, Morrison 912 101500 Hose, 1” x 20’ Fuel Dispensing (Not Shown) Bracket, 1” T-Bracket Assembly 22 1 30705 Mount Assembly, Control Box 23 1 10061 24 2 19682 Control Box, STP-CBS Screw, Hex, 5/16-18 x 1”, Self-Drilling 6 1 7 4 17199 50160 50126 17749 8 7 18065 9 1 25173 10 1 25174 11 1 21021 12 1 18871 44 Description 13.5 DISPENSING SYSTEM WITH SUBMERSIBLE PUMP (8500 - 15000) 2 8 20 17 16 1 18 7 12 19 6 22 22 2 1 5 7 25 24 23 8 4 9 10 1 3 3 11 15 8 7 1 2 14 13 1 7 8 MMG-00991 Item Qty. Part No. Description Item Qty. Part No. 1 5 17295 Hex Reducing Bushing, 3” M to 2” F 13 1 10057 Meter, Fuel, FR901C 2 3 17198 14 1 50128 Pipe, 1” Sch 40 x 9-15/16” LG () 3 2 10056 15 1 10058 4 1 50125 Union, 1” Sch 40 Bushing, 3M x 1F x 1F DBL Tapped Reducer Pipe, 1” Sch 40, 36” LG 16 1 10059 5 1 17199 50126 Ball Valve, 1” NPT Pipe, 1” Sch 40, 101-1/16” LG (12000, 15000) Pipe, 1” Sch 40, 53-1/16” LG (8500) Pipe, 1” Sch 40, 77-1/16” LG (10000) 90° - 1” NPT SS Elbow (4464K16) 17 1 50129 Nozzle Kit, Fill-Rite 120NB Pump, Submersible, FE Petro STP75-VL3-7 Pipe, 1” Sch 40, 18-1/2” LG 18 1 10062 Nipple, 2” NPT, 2-1/2” LG 19 1 10060 20 1 10070 Nipple, 1” NPT, 6” Long Filter Head, 1” NPT For F40 Filter (700ACCF7017) Diesel Filter, - 40 GPM-50 PSI 30 Micron Diesel Nozzle, 1" Ultra Hi-Flow, Green Elbow, 2” NPT x 90° 21 1 21023 22 1 40025 Bushing, 2M x 1F Reducer Valve, Anti-Siphon, 1”, Morrison 912 101500 Hose, 1” x 20’ Fuel Dispensing (Not Shown) Bracket, 1” T-Bracket Assembly 23 1 30705 Mount Assembly, Control Box 24 1 10061 25 2 19682 Control Box, STP-CBS Screw, Hex, 5/16-18 x 1”, Self-Drilling 6 1 7 4 50145 50144 17749 8 4 18065 9 1 25173 10 1 25174 11 1 21021 12 1 18871 Description 45 13.6 DISPENSING SYSTEM WITH 313 PUMP 2 10 15 9 18 9 16 17 2 10 TOP VIEW 11 12 19 8 1 24 4 3 22 7 6 17 16 12 5 18 19 3 10 21 23 4 14 10 13 11 20 MMG-00992 Item Qty. Part No. Description Item Qty. Part No. 1 1 17039 15 1 17593 2 1 21271 16 1 25173 3 2 17295 Hex Reducing Bushing 3” M to 2” F Pump, Fuel FR313 Split 35 GPM Diesel Nipple, 1” NPT, 7” Long, Poly 4 2 17198 17 1 25174 5 1 10056 18 1 18196 6 1 50125 19 1 21021 7 1 17199 50133 20 1 10065 21 1 17134 50135 22 1 Union, 1” Sch 40 Bushing, 3M x 1F x 1F DBL Tapped Reducer Pipe, 1” Sch 40, 36” Long 9 1 50150 Ball Valve, 1” NPT Pipe, 1” Sch 40 x 78-11/16” LG (4000) Pipe, 1” Sch 40 x 66-11/16” LG (8500) Pipe, 1” Sch 40 x 90-11/16” LG (10000) Pipe, 1” Sch 40 x 114-11/16” LG (5000, 12000, 15000) Pipe, 1” Sch 40 X 16-3/4” LG 10 4 17749 90° - 1” NPT SS Elbow (4464K16) 50154 8 1 50153 50152 11 1 30509 12 1 21273 13 1 18065 50151 14 1 46 50134 50132 FR902R Mount Assembly Meter, Fuel, FR902R 4 Digit Mech Gal. Nipple, 1” NPT, 6” Long Pipe, 1” Sch 40 x 19-11/16” LG (4000, 8500, 10000, 12000) Pipe, 1” Sch 40 x 23-7/8” LG (15000) Pipe, 1” Sch 40 x 14” LG (5000) 50156 50155 50157 23 1 50127 24* 1 40025 25 1 21023 Description Nipple, Galvanized, SCH 40, 1” x 10” LG Filter Head, 1” NPT For F40 Filter (700ACCF7017) Diesel Filter, - 40 GPM-50 PSI 30 Micron Elbow, 1" 90° Street Galv. Diesel Nozzle, 1" Ultra Hi-Flow, Green Valve, 334 Series Single Foot Reducer Bushing, 1-1/2” To 1-1/4” Pipe, 1” Sch 40 Suction 139-1/4” LG (4000) Pipe, 1” Sch 40 Suction 127-1/4” LG (8500) Pipe, 1” Sch 40 Suction 151-1/4” LG (10000) Pipe, 1” Sch 40 Suction 175-1/4” LG (5000, 12000, 15000) Pipe, 1” Sch 40 x 12” Bracket, 1” T-Bracket Assembly Hose, 1” x 20’ Fuel Dispensing (Not Shown) *Item 24 qty. 2 on 8500 gal. tank. 13.7 21496 HOSE REEL UPGRADE 13.8 61536 OPW TANK LEVEL GAUGE 1 1 2 2 2 4 3 9 10 8 7 6 5 MMG-00994 MMG-00993 Item Qty. Part No. 1 1 11205 Hose Reel, Diesel, 35’ (Cox Reel) Description 2 2 11506 1” Hose Nipple, 1” M NPT 304 SS 3 1 50164 Hose, Fuel, 1” x 20” LG 4 2 11513 Clamp, T-Bolt, 1.344” to 1.562” 5 4 19348 Washer, Flat, 3/8” 6 4 19326 Bolt, Hex, 3/8-16 UNC x 1.25 7 4 19347 3/8-16 UNC Nylon Lock Nut 8 1 20775 Mount, Cox Reel 9 4 19595 10 4 18943 Nut, Hex, Flanged, 1/2-13 UNC Bolt, Hex, Flanged, Steel, Mild 1/2-13 UNC x 1.25 Item Qty. Part No. 1 1 25843 2 1 18868 Description Gauge, OPW Tank Level 200TGENG Nipple, 1” NPT, 6” Long 47 13.9 61547 3” UPDRAFT VENT WITH 24” ELEVATION PIPE 13.10 61548 3” PRESSURE/VAC. VENT ALARM WITH 24” ELEVATION PIPE 2 2 1 1 MMG-00995 Item Qty. Part No. 1 1 50163 2 1 20634 48 Description Pipe, 3”, Sch 40 x 24” LG, One End Threaded Vent, Updraft, 3” Slip On MMG-00996 Item Qty. Part No. 1 1 50163 Pipe, 3”, Sch 40 x 24” LG Description 2 1 20663 Vent/Overfill Alarm, 3" 14. CAPACITY CHARTS (GALLONS PER VERTICAL INCH) 14.1 4,000 GALLON VERTICAL DOUBLE WALL FUEL TANK (64056) Height Gallons Height Gallons Height Gallons Height Gallons 1 29.2 37 1079.3 73 2129.5 109 3179.6 2 58.3 38 1108.5 74 2158.6 110 3208.8 3 87.5 39 1137.7 75 2187.8 111 3237.9 4 116.7 40 1166.8 76 2217.0 112 3267.1 5 145.9 41 1196.0 77 2246.1 113 3296.3 6 204.2 42 1225.2 78 2275.3 114 3325.4 7 175.0 43 1254.3 79 2304.5 115 3354.6 8 233.4 44 1283.5 80 2333.6 116 3383.8 9 262.5 45 1312.7 81 2362.8 117 3413.0 10 291.7 46 1341.8 82 2392.0 118 3442.1 11 320.9 47 1371.0 83 2421.2 119 3471.3 12 350.0 48 1400.2 84 2450.3 120 3500.5 13 379.2 49 1429.4 85 2479.5 121 3529.6 14 408.4 50 1458.5 86 2508.7 122 3558.8 15 437.6 51 1487.7 87 2537.8 123 3588.0 16 466.7 52 1516.9 88 2567.0 124 3617.1 17 495.9 53 1546.0 89 2596.2 125 3646.3 18 525.1 54 1575.2 90 2625.4 126 3675.5 19 554.2 55 1604.4 91 2654.5 127 3704.7 20 583.4 56 1633.6 92 2683.7 128 3733.8 21 612.6 57 1662.7 93 2712.9 129 3763.0 22 641.8 58 1691.9 94 2742.0 130 3792.2 23 670.9 59 1721.1 95 2771.2 131 3821.3 24 700.1 60 1750.2 96 2800.4 132 3850.5 25 729.3 61 1779.4 97 2829.5 133 3879.7 26 758.4 62 1808.6 98 2858.7 134 3908.9 27 787.6 63 1837.7 99 2887.9 135 3938.0 28 816.8 64 1866.9 100 2917.1 136 3967.2 29 845.9 65 1896.1 101 2946.2 137 3996.4 30 875.1 66 1925.3 102 2975.4 138 4025.5 31 904.3 67 1954.4 103 3004.6 139 4054.7 32 933.5 68 1983.6 104 3033.7 140 4083.9 33 962.6 69 2012.8 105 3062.9 141 4113.0 34 991.8 70 2041.9 106 3092.1 142 4142.2 35 1021.0 71 2071.1 107 3121.2 143 4171.4 36 1050.1 72 2100.3 108 3150.4 144 4200.6 49 14.2 5,000 GALLON VERTICAL DOUBLE WALL FUEL TANK (64068) Height Gallons Height Gallons Height Gallons Height Gallons Height Gallons 1 28.3 37 1047.2 73 2066.1 109 3084.9 145 4103.8 50 2 56.6 38 1075.5 74 2094.4 110 3113.2 146 4132.1 3 84.9 39 1103.8 75 2122.7 111 3141.5 147 4160.4 4 113.2 40 1132.1 76 2151.0 112 3169.9 148 4188.7 4217.0 5 141.5 41 1160.4 77 2179.3 113 3198.2 149 6 169.8 42 1188.7 78 2207.6 114 3226.5 150 4245.3 7 198.1 43 1217.0 79 2235.9 115 3254.8 151 4273.6 8 226.4 44 1245.3 80 2264.2 116 3283.1 152 4301.9 9 254.7 45 1273.6 81 2292.5 117 3311.4 153 4330.2 10 283.0 46 1301.9 82 2320.8 118 3339.7 154 4358.5 11 311.3 47 1330.2 83 2349.1 119 3368.0 155 4386.8 12 339.6 48 1358.5 84 2377.4 120 3396.3 156 4415.2 13 367.9 49 1386.8 85 2405.7 121 3424.6 157 4443.5 14 396.2 50 1415.1 86 2434.0 122 3452.9 158 4471.8 15 424.5 51 1443.4 87 2462.3 123 3481.2 159 4500.1 16 452.8 52 1471.7 88 2490.6 124 3509.5 160 4528.4 17 481.1 53 1500.0 89 2518.9 125 3537.8 161 4556.7 18 509.4 54 1528.3 90 2547.2 126 3566.1 162 4585.0 19 537.7 55 1556.6 91 2575.5 127 3594.4 163 4613.3 20 566.0 56 1584.9 92 2603.8 128 3622.7 164 4641.6 21 594.3 57 1613.2 93 2632.1 129 3651.0 165 4669.9 22 622.6 58 1641.5 94 2660.4 130 3679.3 166 4698.2 23 651.0 59 1669.8 95 2688.7 131 3707.6 167 4726.5 24 679.3 60 1698.1 96 2717.0 132 3735.9 168 4754.8 25 707.6 61 1726.4 97 2745.3 133 3764.2 169 4783.1 26 735.9 62 1754.7 98 2773.6 134 3792.5 170 4811.4 27 764.2 63 1783.0 99 2801.9 135 3820.8 171 4839.7 28 792.5 64 1811.3 100 2830.2 136 3849.1 172 4868.0 29 820.8 65 1839.6 101 2858.5 137 3877.4 173 4896.3 30 849.1 66 1867.9 102 2886.8 138 3905.7 174 4924.6 31 877.4 67 1896.3 103 2915.1 139 3934.0 175 4952.9 32 905.7 68 1924.6 104 2943.4 140 3962.3 176 4981.2 33 934.0 69 1952.9 105 2971.7 141 3990.6 177 5009.5 34 962.3 70 1981.2 106 3000.0 142 4018.9 178 5037.8 35 990.6 71 2009.5 107 3028.3 143 4047.2 179 5066.1 36 1018.9 72 2037.8 108 3056.6 144 4075.5 180 5094.4 14.3 8,500 GALLON VERTICAL DOUBLE WALL FUEL TANK (64045) Height Gallons Height Gallons Height Gallons Height Gallons 1 67.2 34 2286.1 67 4504.9 100 6723.7 2 134.5 35 2353.3 68 4572.1 101 6791.0 3 201.7 36 2420.5 69 4639.4 102 6858.2 4 268.9 37 2487.8 70 4706.6 103 6925.4 5 336.2 38 2555.0 71 4773.8 104 6992.7 6 403.4 39 2622.3 72 4841.1 105 7059.9 7 470.7 40 2689.5 73 4908.3 106 7127.2 8 537.9 41 2756.7 74 4975.6 107 7194.4 9 605.1 42 2824.0 75 5042.8 108 7261.6 10 672.4 43 2891.2 76 5110.0 109 7328.9 11 739.6 44 2958.4 77 5177.3 110 7396.1 12 806.8 45 3025.7 78 5244.5 111 7463.3 13 874.1 46 3092.9 79 5311.7 112 7530.6 14 941.3 47 3160.2 80 5379.0 113 7597.8 15 1008.6 48 3227.4 81 5446.2 114 7665.1 16 1075.8 49 3294.6 82 5513.5 115 7732.3 17 1143.0 50 3361.9 83 5580.7 116 7799.5 18 1210.3 51 3429.1 84 5647.9 117 7866.8 19 1277.5 52 3496.3 85 5715.2 118 7934.0 20 1344.7 53 3563.6 86 5782.4 119 8001.2 21 1412.0 54 3630.8 87 5849.6 120 8068.5 22 1479.2 55 3698.1 88 5916.9 121 8135.7 23 1546.5 56 3765.3 89 5984.1 122 8202.9 24 1613.7 57 3832.5 90 6051.4 123 8270.2 25 1680.9 58 3899.8 91 6118.6 124 8337.4 26 1748.2 59 3967.0 92 6185.8 125 8404.7 27 1815.4 60 4034.2 93 6253.1 126 8471.9 28 1882.6 61 4101.5 94 6320.3 127 8539.1 29 1949.9 62 4168.7 95 6387.5 128 8606.4 30 2017.1 63 4235.9 96 6454.8 129 8673.6 31 2084.4 64 4303.2 97 6522.0 130 8740.8 32 2151.6 65 4370.4 98 6589.3 131 8808.1 33 2218.8 66 4437.7 99 6656.5 132 8875.3 51 14.4 10,000 GALLON VERTICAL DOUBLE WALL FUEL TANK (64044) Height Gallons Height Gallons Height Gallons Height Gallons Height Gallons 1 67.2 32 2151.6 63 4235.9 94 6320.3 125 8404.7 2 134.5 33 2218.8 64 4303.2 95 6387.5 126 8471.9 3 201.7 34 2286.1 65 4370.4 96 6454.8 127 8539.1 4 268.9 35 2353.3 66 4437.7 97 6522.0 128 8606.4 5 336.2 36 2420.5 67 4504.9 98 6589.3 129 8673.6 6 403.4 37 2487.8 68 4572.1 99 6656.5 130 8740.8 7 470.7 38 2555.0 69 4639.4 100 6723.7 131 8808.1 8 537.9 39 2622.3 70 4706.6 101 6791.0 132 8875.3 9 605.1 40 2689.5 71 4773.8 102 6858.2 133 8942.6 10 672.4 41 2756.7 72 4841.1 103 6925.4 134 9009.8 52 11 739.6 42 2824.0 73 4908.3 104 6992.7 135 9077.0 12 806.8 43 2891.2 74 4975.6 105 7059.9 136 9144.3 13 874.1 44 2958.4 75 5042.8 106 7127.2 137 9211.5 14 941.3 45 3025.7 76 5110.0 107 7194.4 138 9278.7 15 1008.6 46 3092.9 77 5177.3 108 7261.6 139 9346.0 16 1075.8 47 3160.2 78 5244.5 109 7328.9 140 9413.2 17 1143.0 48 3227.4 79 5311.7 110 7396.1 141 9480.5 18 1210.3 49 3294.6 80 5379.0 111 7463.3 142 9547.7 19 1277.5 50 3361.9 81 5446.2 112 7530.6 143 9614.9 20 1344.7 51 3429.1 82 5513.5 113 7597.8 144 9682.2 21 1412.0 52 3496.3 83 5580.7 114 7665.1 145 9749.4 9816.6 22 1479.2 53 3563.6 84 5647.9 115 7732.3 146 23 1546.5 54 3630.8 85 5715.2 116 7799.5 147 9883.9 24 1613.7 55 3698.1 86 5782.4 117 7866.8 148 9951.1 25 1680.9 56 3765.3 87 5849.6 118 7934.0 149 10018.4 26 1748.2 57 3832.5 88 5916.9 119 8001.2 150 10085.6 27 1815.4 58 3899.8 89 5984.1 120 8068.5 151 10152.8 28 1882.6 59 3967.0 90 6051.4 121 8135.7 152 10220.1 29 1949.9 60 4034.2 91 6118.6 122 8202.9 153 10287.3 30 2017.1 61 4101.5 92 6185.8 123 8270.2 154 10354.5 31 2084.4 62 4168.7 93 6253.1 124 8337.4 155 10421.8 156 10489.0 14.5 12,000 GALLON VERTICAL DOUBLE WALL FUEL TANK (64040) Height Gallons Height Gallons Height Gallons Height Gallons Height Gallons 1 67.2 37 2487.8 73 4908.3 109 7328.9 145 9749.4 2 134.5 38 2555.0 74 4975.6 110 7396.1 146 9816.6 3 201.7 39 2622.3 75 5042.8 111 7463.3 147 9883.9 4 268.9 40 2689.5 76 5110.0 112 7530.6 148 9951.1 10018.4 5 336.2 41 2756.7 77 5177.3 113 7597.8 149 6 403.4 42 2824.0 78 5244.5 114 7665.1 150 10085.6 7 470.7 43 2891.2 79 5311.7 115 7732.3 151 10152.8 8 537.9 44 2958.4 80 5379.0 116 7799.5 152 10220.1 9 605.1 45 3025.7 81 5446.2 117 7866.8 153 10287.3 10 672.4 46 3092.9 82 5513.5 118 7934.0 154 10354.5 11 739.6 47 3160.2 83 5580.7 119 8001.2 155 10421.8 12 806.8 48 3227.4 84 5647.9 120 8068.5 156 10489.0 13 874.1 49 3294.6 85 5715.2 121 8135.7 157 10556.3 14 941.3 50 3361.9 86 5782.4 122 8202.9 158 10623.5 15 1008.6 51 3429.1 87 5849.6 123 8270.2 159 10690.7 16 1075.8 52 3496.3 88 5916.9 124 8337.4 160 10758.0 17 1143.0 53 3563.6 89 5984.1 125 8404.7 161 10825.2 18 1210.3 54 3630.8 90 6051.4 126 8471.9 162 10892.4 19 1277.5 55 3698.1 91 6118.6 127 8539.1 163 10959.7 20 1344.7 56 3765.3 92 6185.8 128 8606.4 164 11026.9 21 1412.0 57 3832.5 93 6253.1 129 8673.6 165 11094.2 22 1479.2 58 3899.8 94 6320.3 130 8740.8 166 11161.4 23 1546.5 59 3967.0 95 6387.5 131 8808.1 167 11228.6 24 1613.7 60 4034.2 96 6454.8 132 8875.3 168 11295.9 25 1680.9 61 4101.5 97 6522.0 133 8942.6 169 11363.1 26 1748.2 62 4168.7 98 6589.3 134 9009.8 170 11430.3 27 1815.4 63 4235.9 99 6656.5 135 9077.0 171 11497.6 28 1882.6 64 4303.2 100 6723.7 136 9144.3 172 11564.8 29 1949.9 65 4370.4 101 6791.0 137 9211.5 173 11632.1 30 2017.1 66 4437.7 102 6858.2 138 9278.7 174 11699.3 31 2084.4 67 4504.9 103 6925.4 139 9346.0 175 11766.5 32 2151.6 68 4572.1 104 6992.7 140 9413.2 176 11833.8 33 2218.8 69 4639.4 105 7059.9 141 9480.5 177 11901.0 34 2286.1 70 4706.6 106 7127.2 142 9547.7 178 11968.2 35 2353.3 71 4773.8 107 7194.4 143 9614.9 179 12035.5 36 2420.5 72 4841.1 108 7261.6 144 9682.2 180 12102.7 53 14.6 15,000 GALLON VERTICAL DOUBLE WALL FUEL TANK (64080) Height Gallons Height Gallons Height Gallons Height Gallons Height Gallons 1 87.3 37 3230.6 73 6373.8 109 9517.0 145 12660.3 54 2 174.6 38 3317.9 74 6461.1 110 9604.3 146 12747.6 3 261.9 39 3405.2 75 6548.4 111 9691.7 147 12834.9 4 349.2 40 3492.5 76 6635.7 112 9779.0 148 12922.2 13009.5 5 436.6 41 3579.8 77 6723.0 113 9866.3 149 6 523.9 42 3667.1 78 6810.4 114 9953.6 150 13096.8 7 611.2 43 3754.4 79 6897.7 115 10040.9 151 13184.1 8 698.5 44 3841.7 80 6985.0 116 10128.2 152 13271.5 9 785.8 45 3929.0 81 7072.3 117 10215.5 153 13358.8 10 873.1 46 4016.4 82 7159.6 118 10302.8 154 13446.1 11 960.4 47 4103.7 83 7246.9 119 10390.2 155 13533.4 12 1047.7 48 4191.0 84 7334.2 120 10477.5 156 13620.7 13 1135.1 49 4278.3 85 7421.5 121 10564.8 157 13708.0 14 1222.4 50 4365.6 86 7508.9 122 10652.1 158 13795.3 15 1309.7 51 4452.9 87 7596.2 123 10739.4 159 13882.6 16 1397.0 52 4540.2 88 7683.5 124 10826.7 160 13970.0 17 1484.3 53 4627.5 89 7770.8 125 10914.0 161 14057.3 18 1571.6 54 4714.9 90 7858.1 126 11001.3 162 14144.6 19 1658.9 55 4802.2 91 7945.4 127 11088.7 163 14231.9 20 1746.2 56 4889.5 92 8032.7 128 11176.0 164 14319.2 21 1833.6 57 4976.8 93 8120.0 129 11263.3 165 14406.5 22 1920.9 58 5064.1 94 8207.3 130 11350.6 166 14493.8 23 2008.2 59 5151.4 95 8294.7 131 11437.9 167 14581.1 24 2095.5 60 5238.7 96 8382.0 132 11525.2 168 14668.5 25 2182.8 61 5326.0 97 8469.3 133 11612.5 169 14755.8 26 2270.1 62 5413.4 98 8556.6 134 11699.8 170 14843.1 27 2357.4 63 5500.7 99 8643.9 135 11787.1 171 14930.4 28 2444.7 64 5588.0 100 8731.2 136 11874.5 172 15017.7 29 2532.1 65 5675.3 101 8818.5 137 11961.8 173 15105.0 30 2619.4 66 5762.6 102 8905.8 138 12049.1 174 15192.3 31 2706.7 67 5849.9 103 8993.2 139 12136.4 175 15279.6 32 2794.0 68 5937.2 104 9080.5 140 12223.7 176 15366.9 33 2881.3 69 6024.5 105 9167.8 141 12311.0 177 15454.3 34 2968.6 70 6111.9 106 9255.1 142 12398.3 178 15541.6 35 3055.9 71 6199.2 107 9342.4 143 12485.6 179 15628.9 36 3143.2 72 6286.5 108 9429.7 144 12573.0 180 15716.2 MERIDIAN MANUFACTURING INC. With over 65 years of experience, Meridian is your storage and handling expert. Cambridge Office 605 Sheldon Drive Cambridge, ON N1T 2K1 PH: 519.620.6004 TF: 855.346.3712 FX: 519.620.6041 Camrose Office 4232 - 38 St. Camrose, AB T4V 4B2 PH: 780.672.4516 TF: 800.830.2467 FX: 780.672.4759 Regina Office PO Box 1996 Regina, SK S4P 3E1 PH: 306.545.4044 TF: 800.667.5904 FX: 306.545.4216 Storm Lake Office 2902 Expansion Blvd. Storm Lake, IA 50588 PH: 712.732.1780 TF: 800.437.2334 FX: 712.732.1028 Lethbridge Office 3125 - 24 Ave. N. Lethbridge, AB T1H 5G2 PH: 403.320.7070 TF: 800.661.1436 FX: 403.320.7579 Winkler Office Box 760, 275 Hespler Ave. Winkler, MB R6W 4A8 PH: 204.325.7883 TF: 800.665.7259 FX: 204.325.5556 © 2015 Meridian Manufacturing, Inc. Registered Trademarks Used Under License. Form No. 17567 Printed in U.S.A. (12/15)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2015:12:15 10:53:30-06:00 Creator : Adobe InDesign CC 2015 (Windows) Modify Date : 2016:04:22 14:24:34-06:00 XMP Toolkit : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15 Metadata Date : 2016:04:22 14:24:34-06:00 Creator Tool : Adobe InDesign CC 2015 (Windows) Instance ID : uuid:a6d3c2c5-9150-4b52-9a9c-651ffe4cadc7 Original Document ID : xmp.did:0380117407206811AB08BD934DD0E129 Document ID : xmp.id:a5878587-c3f7-da4b-80da-b5edb9dab5cf Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:8a1fff39-53e5-9c42-b149-35fc7bd7d9ce Derived From Document ID : xmp.did:530B45678083E311B391D23C92EF5485 Derived From Original Document ID: xmp.did:0380117407206811AB08BD934DD0E129 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Windows) History Changed : / History When : 2015:12:15 10:53:30-06:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 56EXIF Metadata provided by EXIF.tools