2710 Series, Wide Heavy Duty Trench Drains, Modular Drains Series D2710

User Manual: 2710 Series

Open the PDF directly: View PDF PDF.
Page Count: 2

Download2710 Series, Wide Heavy Duty Trench Drains, Modular Drains Series D2710
Open PDF In BrowserView PDF
SMITH ® JAY R.

LOCATION

MEMBER OF:

WE CAN ASSUME NO RESPONSIBILITY FOR USE OF SUPERSEDED OR VOID DATA

WIDE HEAVY DUTY TRENCH DRAINS
HEAVY DUTY MODULAR TRENCH DRAINS

FUNCTION: Used as a ramp drain in loading or parking areas where a wide continuous trench drain is required to handle moderate traffic
loads and serve as a reservoir for large water runoff. Can also be used individually as an area drain (A Section Only).
Free Area
39.3 SQ IN
(254)SQ CM
(Each Section)

12 (305)

12 (305)

13 3/4 (350)
12 1/4 (310)

9 3/8 (238)Δ
Δ5 7/8
(149)

B Section

B Section
A
A Section

3 1/2
(89)

Fig. 2710C ........ CAULK OUTLET
Fig. 2710Y........ NO-HUB OUTLET

Shallow Hub Body

3/8 (10)
12 (305)

12 (305)

2 1/4 (57)Δ

12 (305)

3/8 (10)

End Section View

A (Pipe Size) = 03(75), 04(100), 05(125), 06(150) or 08(200)

13 3/4 (350)
12 1/4 (310)

14 3/8 (365)Δ
Δ5 7/8
(149)

B Section

B Section

Note: B sections are shown above with the A
section for illustrative purposes only. Only the
A section is regularly furnished and additional
B sections must be specified as determined by
figure number.

N
M
L
K

REV.

7-14-15
4-1-14
6-22-04
11-3-97

DATE

Revised Variations
Revised Text
Rev Free Area
Rev Var.

DESCRIPTION

12 (305)

11 1/4
(285)

Top View

End Section View

Assembly ordering Information:
A and B sections are both 12"(305) long. A section
is the outlet section and available in the standard hub
or deep outlet hub (-DH). B section is the extension
section. It is recommended that no more than 5,12"(305)
extension sections on each side of the A outlet section be
used. Each section is 12" (305) long and end plates are
1 1/2"(38) thick including flange. In determining overall
length, multiply 12" (305) x no. of sections and add
3"(76) (thickness of the two end plates).

Δ Add 1 1/4" (32) when Bronze Top is specified.

12 (305)

FIG. 2710C (-DH) ........CAULK OUTLET
FIG. 2710Y (-DH) ........NO-HUB OUTLET

Deep Hub Body

REGULARLY FURNISHED:
Duco Cast Iron Flanged Body
Outlet Section A and Flanged
End Plate with Cast Iron Anti-Shift
Loose Set Square Hole Grate.

12 (305)

1/2
(13)

8 1/2
(215)

A (Pipe Size) = 03(75), 04(100),
05(125), 06(150) or 08(200)
DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE

SB

CHECKED BY:

EMB

DRAWN BY:

12 (305)

2 1/4Δ
(57)

A
A Section

2710 Series

Note: Apply sealant provided
between each section and end
plate prior to assembling.

3/8 (10)

1 1/2 (38) Typ.

McD

APPROVED BY:

DATE:

11-6-89

SCALE:

NONE

A

SIZE

S2710

DRAWING NUMBER

SINCE 1926

FIGURE
NUMBER

G

IN
I
ve
nti N E E R Cu
n
on R
ather Tha

P

®

EN e
r

CUSTOMER
DRIVEN

®

G

ASPE

MEMBER OF MORRIS GROUP INTERNATIONAL
POST OFFICE BOX 3237
MONTGOMERY, ALABAMA 36109-0237 (USA)
TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com

NITARY
SA

re

N

SMITH MFG. CO.®

FIG. 2710 . . . . . "A" Section
FIG. 2711 . . . . . "A" Section
FIG. 2712 . . . . . "A" Section
FIG. 2713 . . . . . "A" Section
FIG. 2714 . . . . . "A" Section
FIG. 2715 . . . . . "A" Section
FIG. 2716 . . . . . "A" Section
FIG. 2717 . . . . . "A" Section
FIG. 2718 . . . . . "A" Section
FIG. 2719 . . . . . "A" Section
FIG. 2720 . . . . . "A" Section

with (1) "B" Section
with (2) "B" Section
with (3) "B" Section
with (4) "B" Section
with (5) "B" Section
with (6) "B" Section
with (7) "B" Section
with (8) "B" Section
with (9) "B" Section
with (10) "B" Section

NOTE: Last digit of figure number designates number of "B" sections.
NOTE: Any figure number other than the 2710 and 2711 must be
furnished with sectional layout when placing order, to insure proper
assembly at jobsite.

VARIATIONS:
Backwater Valve -V 02(50)
-04"(100) (Deep Hub Body Only)
Deep Hub -DH, Not Available in 08"(200)
Dome Bottom Strainer -DBS
Flashing Clamp -C
Sediment Bucket -B (Deep Hub
Body only)
Vandal Proof Grate -U
Quad Close Trap Seal
(Specify Fig. 2692)
TBW
TBW
TBW
EMB
BY

CL
CL
CL
BS

CKD. BY

WEIGHT
POUNDS

VOLUME
CUBIC FEET

OPTIONAL MATERIALS:
Ductile Iron Grate -M
Galvanized Cast Iron -G
Nickel Bronze Top -NB
Polished Bronze Top -PB

NOTE: Dimensions shown in
parentheses are in millimeters.

FIGURE NUMBER

2710 Series

WE CAN ASSUME NO RESPONSIBILITY FOR USE OF SUPERSEDED OR VOID DATA

S2710BS

DRAWING NUMBER

A

SIZE

NONE
SCALE:

3-26-90
DATE:

G

IN
I
ve
nti N E E R Cu
n
on R
ather Tha

MEMBER OF:

ASSEMBLY DRAWING
13

11

12

10

4

9

2

8

3

1
3

8

NOTES:
Numbers designated
thus are regularly furnished parts.

TD

APPROVED BY:

9

14
4
6

Numbers designated
thus are variations/
options and must be
specified.

DIMENSIONS ARE SUBJECT TO MANUFACTURERS TOLERANCE AND CHANGE WITHOUT NOTICE

BS

CHECKED BY:

EMB

®

P

DRAWN BY:

®

EN e
r

SINCE 1926

2710
Assembly Drawing

ASPE

MEMBER OF MORRIS GROUP INTERNATIONAL
POST OFFICE BOX 3237
MONTGOMERY, ALABAMA 36109-0237 (USA)
TEL: 334-277-8520 FAX: 334-272-7396 www.jrsmith.com

CUSTOMER
DRIVEN

FIGURE
NUMBER

LOCATION
NITARY
SA

G

SMITH MFG. CO.®

re

D

SMITH ® JAY R.

*

REV.

7

Quanities are per
section.
DESCRIPTION

NO.

D
C
B
A

5

DESCRIPTION

QU.* NO.

QU.*

1

Flanged Body (Specify)

1

8

Flashing Flange

4

2

Grate

1

9

5/16(8)-18 x 3/4(19) Bolt with Washer

8

3

Flanged End Plates

2

10

Body Veneer

1

4

5/16(8)-18 x 1 3/4(44) Bolts/Nuts & Washer

8

11

5/16(8)-18 x 3/4(19) Bolt with Washer

4

5

Hub (Specify Size)

1

12

Grate Veneer

1

6

Gasket

1

13

10-24 x 7/16(11) Flat Head Screws

5

7

5/16(8)-18 x 1 1/4(32) Bolt & Washer

4

14

Apply Permatex #2 Seal to each end
of each body section

2

4-9-08
11-5-97
6-19-95
3-91
DATE

Revised Callouts
Revised Dwg & Callouts
Added Millimeters
Added Flange & Boss
DESCRIPTION

TBW
EMB
EMB
EMB
BY

AM
BS
BS
JCS
CKD. BY

WEIGHT
POUNDS

VOLUME
CUBIC FEET

FIGURE NUMBER

2710
Assembly Drawing
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Jay R. Smith Mfg. Co.®
Create Date                     : 1997:10:10 09:02:49Z
Keywords                        : 2710 Series, Wide, Heavy, Duty, Trench, Drains, Modular, Jay R. Smith Mfg. Co.®
Modify Date                     : 2015:07:23 08:42:22-05:00
Subject                         : 2710 Series, Wide Heavy Duty Trench Drains, Heavy Duty Modular Trench Drains, built by Jay R. Smith Mfg. Co.®
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 3.0 for Power Macintosh
Metadata Date                   : 2015:07:23 08:42:22-05:00
Format                          : application/pdf
Title                           : 2710 Series, Wide Heavy Duty Trench Drains, Heavy Duty Modular Trench Drains
Description                     : 2710 Series, Wide Heavy Duty Trench Drains, Heavy Duty Modular Trench Drains, built by Jay R. Smith Mfg. Co.®
Creator                         : Jay R. Smith Mfg. Co.®
Document ID                     : uuid:5ee21349-c3e5-fa4c-aabd-169ede3761c3
Instance ID                     : uuid:cbd2ffde-8255-b343-abf0-2b808e1b315d
State                           : 1
Version                         : 1.1
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Page Count                      : 2
EXIF Metadata provided by EXIF.tools

Navigation menu