USB 485M Quick Start Guide Instruction Sheet
User Manual: USB-485M instruction sheet USB-485M Insert/Instruction Sheets
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
USB–485M 2017-09-06 Dimensions USB to RS-485 Communication Adapter Instruction Sheet RJ-45 Pin-out 80.0 [3.15] 5011670101-UM01 UNITS: mm [in] 8 1 21.2 [0.83] 22.5 [0.89] RJ-45 Pin Description 1 reserved 2 reserved 3 reserved 4 SG+ 5 SG– 6 reserved 7 reserved 8 reserved Preparations BEFORE Installing Driver (Extract the Driver File) Install the driver file onto your PC BEFORE installing the USB-485M communication adapter. The driver file (USB-485M_Drivers.exe) is located on the mini-CD supplied with the USB-485M. Do NOT connect the USB-485M to your PC before extracting the driver file. Insert the mini-CD into your PC, follow the file installation prompts, and accept the default selections except as shown below. (The following screen captures are from 32-bit Windows 7. The installation windows from other operating systems may vary somewhat.) • Select the file “USB-485M_Drivers” for installation: Wiring Connections The wiring connector on the USB-485M is a standard 8-pin RJ45 receptacle. A standard 6-pin RJ12 connection plug fits into the RJ45 receptacle, but it connects only the middle six pins. RJ12 pins 1–6 connect to RJ45 pins 2–7. • P lease read this instruction sheet thoroughly before installing and using the USB-485M. • T he contents of this instruction sheet may be changed without prior notice. Please check the AutomationDirect website for the latest version: www.automationdirect.com/pn/usb485m. Wiring Connections for GS/DURApulse Series AC Drives USB-485M gray 6-wire crossover cable USB-485M Converter • T he driver file for this communication adapter may be updated without prior notice. Please check the AutomationDirect website for the latest version: http://support.automationdirect. com/products/usb485m.html. 1 4 (SG+) 5 (SG–) Preface 3 4 The USB-485M is a convenient USB-to-RS-485 converter, which does not require an external power supply or a complex configuration process. It supports baud rates from 75 to 115.2 kbps, and auto switching direction of data transmission. In addition, it accomplishes RS-485 data transmission using RJ-45 connectors for convenient wiring. Its small size, handy use of plug-and-play, and hotswap capability also provide more convenience for users. USB–485M includes: • USB-to-RS–485 serial communication adapternext line. • Cable, RJ12 to RJ12, 6-wire crossover, 2m [79 in], gray (Comparable to part # ZL-RJ12-CBL-2) • Cable, RJ12 to flying leads, 2-wire straight-through, 2m [79 in], black • Mini-CD containing Windows driver • This instruction sheet Applicable Uses and PC Requirement • • • • • GS and DURApulse™ series AC drives – Modbus polling, and GSOFT configuration software SOLO™ temperature controllers – Modbus polling, and SL-SOFT configuration software SureServo™ servo drives – Modbus polling, and SV-PRO configuration software PLC – CLICK & P3-550 – Modbus polling Requires 32-bit PC with Windows 98, 2000, NT, XP, Vista, 7, 8, or 10 operating system; or 64-bit PC with Windows XP, Vista, 7, 8, or 10 operating system (for bridge and driver installation). • NOTE: Not compatible with DirectSOFT PLC software. RJ12 Plug RJ45 Receptacle RJ12 Plug Wiring Connections for SOLO Temperature Controllers 1 red 3 4 4 (SG+) 5 (SG–) 8 6 Flying Leads RJ12 Plug RJ45 Receptacle Terminals Wiring Connections for SureServo Servo Drives USB-485M converter 1 4 (SG+) 5 (SG–) 8 RJ45 Receptacle 3 4 6 6 RJ12 Plug 3 4 3 4 RJ12 Plug 6 RJ12 Receptacle This cable cross-connects pins 1 to 6, 2 to 5, etc. BN BN / WH RD RD / BK YL YL / BK 1 2 3 4 5 6 SH SH 1 1 1 SVC-MDCOM-CBL communication cable ZL-RTB-RJ12 feed-thru module USB-485M gray 6-wire crossover cable Flying Leads Terminal Blocks USB-485M black 2-wire cable 1 USB-485M Converter 0.4W 1 3000 VDC 75, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 (bps) 8 Type A (plug) RJ-45 6 RJ12 Plug RJ45 Receptacle USB v2.0 specification red 3 4 4 (SG+) 5 (SG–) RS-485 half-duplex (2-wire) 1 2 3 4 5 6 IEEE 1394 Plug green Flying Leads CLICK PLC (Port 3) + Signal A (RS-485) – Signal B (RS-485) LG Logic Ground (0V) Terminals Wiring Connections for P3-550 PLCs Windows Operating System required for bridge & driver installation: 32-bit driver: Windows 98, 2000, NT, XP, Vista, 7, 8, 10 64-bit driver: XP, Vista, 7, 8, 10 USB-485M black 2-wire cable 1 USB-485M Converter 1 4 (SG+) 5 (SG–) LED Display 8 • Steady Green LED ON: power is ON. • Blinking orange LED: data is transmitting. RJ45 Receptacle 09/06/2017 Data + (RS-485) Data – (RS-485) green Wiring Connections for CLICK PLCs no external power suppy needed Data Sheet: USB-485M_QSP 2nd Ed SOLO Temperature Controller USB-485M black 2-wire cable 1 USB-485M Converter SureServo drive (CN3 terminal) 1 2 3 4 5 6 IEEE 1394 Receptacle NOTE: Do not terminate any other wires from this cable. Cut and tape them off. (The other wires are used by the SureServo drive.) USB–485M Specifications PC Compatibility 6 RJ12 Receptacle This cable cross-connects pins 1 to 6, 2 to 5, etc. Specifications Power Supply Power Consumption Voltage Isolation Baud Rates Supported Transmission Type USB Connector RS-485 Connector Compatibility 1 (SG–) 3 (SG+) 4 3 4 6 6 8 GS Series AC Drive 1 1 Sheet 1 of 2 3 4 red 6 RJ12 Plug green Flying Leads P3-550 PLC (RS-485 port) G GND – TXD-/RXD+ TXD+/RXD+ RS-485 Terminals • “Silicon Laboratories CP210x Evaluation Kit Tools” will be installed on your PC: Preparations BEFORE Installing Driver (Extract the Driver File) (continued) • Use the “Browse...” button only if you want to install the driver file in PC folder other than the default folder (not recommended): Troubleshooting (Required Only if Driver Installation is Unsuccessful) • Browse to the file location where the driver is stored: • With the USB-485M connected to the PC, go to: Control Panel --> System --> System Properties --> Hardware --> Device Manager --> Other devices, and select the “CP2103 USB to UART Bridge Controller”: Driver Installation Do NOT connect the USB-485M to your PC before extracting the driver file. • After the driver is successfully updated, the applicable comm port will show in Device Manager. (The comm port number may vary depending upon your PC.) Double click the comm port to set the baud rate, stop bits, etc. AFTER installing the driver file onto your PC, connect the USB-485M communication adapter to the USB port of the PC and install the driver onto the USB-485M. Follow the file installation prompts and accept the default selections except as shown below. (The following screen captures are from Windows XP Service Pack 3. The installation windows from other operating systems may vary somewhat.) • We recommend “Install from a list...”, especially if you installed the driver file on your PC in a file location other than the default location. Data Sheet: USB-485M_QSP 2nd Ed 09/06/2017 Sheet 2 of 2 • From the “General” tab, select “Update Driver...”
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08 Create Date : 2017:09:08 12:45:56-04:00 Metadata Date : 2017:09:08 12:47:12-04:00 Modify Date : 2017:09:08 12:47:12-04:00 Creator Tool : Adobe InDesign CC 2017 (Windows) Instance ID : uuid:45ef0aeb-900a-4cea-943e-ce989f8f9e0d Original Document ID : xmp.did:71f16f90-99f4-5647-bbad-785443cdc3da Document ID : xmp.id:d3312aaa-1429-2f45-8465-9baa7dcc2ea6 Rendition Class : proof:pdf History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Windows) History Changed : / History When : 2017:09:08 12:45:56-04:00 Derived From Instance ID : xmp.iid:6c6f4e4f-25bf-9a47-9f7f-299ed7bf770b Derived From Document ID : xmp.did:71f16f90-99f4-5647-bbad-785443cdc3da Derived From Original Document ID: xmp.did:71f16f90-99f4-5647-bbad-785443cdc3da Derived From Rendition Class : default Format : application/pdf Title : USB-485M Quick-Start Guide Description : USB to RS-485 Communication Adapter Creator : RW Producer : Adobe PDF Library 15.0 Trapped : False Page Layout : SinglePage Page Count : 2 Author : RW Subject : USB to RS-485 Communication Adapter Warning : [Minor] Ignored duplicate Info dictionaryEXIF Metadata provided by EXIF.tools