Dorel Juvenile Group 48020T 900 MHz Color Baby Monitor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	98442
Application ID	lQQkV7qth5K5iy8HfXsosg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.29kB (141075 bits)
Date Submitted	2000-05-01 00:00:00
Date Available	2000-05-23 00:00:00
Creation Date	2000-04-10 13:15:02
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	2000-04-10 13:15:09
Document Title	Users Manual

Table of Contents
Important Safety Messages & Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
3. ALWAYS KEEP THE CAMERA, TV/MONITOR AND AC ADAPTERS OUT OF REACH OF CHILDREN.
4. This product is not intended to be used as a medical monitor and its use should not replace adult supervision. It is important
that an adult stay within the viewing range of the 900 MHz Hand-Held Monitor and Television at all times during use.
5. It is essential to check reception regularly. Please see the Reception section for complete instructions.
FCC Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
6. The Camera and Monitor are intended for indoor use only.
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
7. NEVER use the Camera or Monitor near water. For example, do not use near a bathtub, bathroom sink, laundry tub, kitchen
sink, in a wet basement, etc.
Camera Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Monitor Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Child Monitor Operation and Channel Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Camera Location and Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Wall Mount Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Table Top Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Monitor Location and Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Installing the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Monitor Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
8. Always unplug the AC adapters from wall outlets during long periods of non-use.
9. Position the Camera, Monitor and AC adapters to allow adequate ventilation and prevent these components
from overheating.
10. To prevent overheating, keep the Camera, Monitor and AC adapters away from heat sources such as radiators, heat
registers, stoves or other appliances (including amplifiers) which produce heat. Also keep these components out of
direct sunlight.
11. Use only the AC adapters provided. Use of any other adapters may damage the Camera and/or Monitor. Plug the AC
adapters into standard household current only (120V AC outlet)! To prevent entanglement and overheating,
DO NOT use extension cords.
12. The AC adapters may become slightly warm to the touch during operation. This is normal.
13. Position the AC adapter cords so that they are not walked on or pinched by items placed upon or against them, paying
particular attention to cords at AC adapter plugs, wall plugs, and the point at which the cords attach to the Camera
and Monitor.
Problems and Solutions Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
14. This product should be serviced only by qualified service personnel at Safety 1st when:
• An AC adapter or its plug is damaged,
• The Camera or Monitor have fallen,
• Liquid has spilled into the Camera or Monitor, or
• The Camera or Monitor do not appear to operate normally or exhibit a marked change in performance
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
15. DO NOT attempt to service this product beyond that described in the Problems and Solutions Guide at the end of these
instructions. All other servicing should be referred to qualified personnel at Safety 1st.
System Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Television Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Important Safety Messages
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT
EXPOSE THIS PRODUCT TO WATER OR MOISTURE. NEVER
ATTEMPT TO OPEN THE CASE OF EITHER THE CAMERA OR
MONITOR. THIS IS DANGEROUS AND WILL VOID THE WARRANTY.
NO SERVICEABLE PARTS INSIDE. REFER SERVICING TO SAFETY
1ST CONSUMER RELATIONS (800) 723-3065.
IN CANADA CALL (800) 721-3389.
1. Before using your Safety 1st 900 MHz In Sight Hand-Held TV-Video Monitor:
• Read and follow all instructions carefully.
• Read and observe all warnings on the product and in this instruction booklet.
2. To prevent entanglement with the adapter cord, NEVER place the Camera in or near a crib or playpen. DO NOT place the
Camera on any surface or mount it on any wall where the Camera or its AC adapter cord are within reach of children.
Page 2
16. Retain these instructions for future reference.
NOTE: The LED's on the Camera emit IR (Infra Red) light that is not harmful.
FCC Note
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used according to the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Re-orient or relocate the receiving antenna,
• Increase the separation between the equipment and receiver,
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected,
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
CAUTION: Changes or modifications to this unit not expressly approved by Safety 1st, Inc.
could void the user’s authority to use the equipment.
Care and Maintenance
The 900 MHz Hand-Held Monitor and Television is intended for indoor use only. Do not place the Camera where it will receive direct
sunlight indoors. Outdoor use may damage the Camera and/or Monitor.
The outer surface of the Camera and Monitor can be cleaned with a cloth LIGHTLY dampened with water or a mild cleaning
solution. Do not immerse any part of the 900 MHz Hand-Held Monitor and Television in water. As with any other electronic
product, care should be exercised so as not to drop the product or physically damage it. Electronic components may be
affected by such abuse.
Page 3
Requirements:.
TV-VIDEO MONITOR:
Top View
Tools needed for wall mounting of Camera:
Drill, 3/16” (4.8mm) drill bit, hammer, and Phillips head screwdriver (not included).
4 “AA” alkaline batteries (not included) for TV-Video Monitor.
Adult assembly is required.
ON
OFF EXT. ANT.
BRIGHTNESS
Contents
10
(2)AC Adapters
12
1 Screw
1 Wall Anchor
Camera
TV-Video Monitor
13
Features and Components
CAMERA:
11
Bottom View
1.
Power On (green) / Low Battery (red) LED Light
8.
Channel Selector
2.
2" Color TFT Active Matrix Display Screen
9.
Mode Switch (TV/Camera/Audio)
3.
TV Tuning / Brightness Adjuster Buttons
10. TV-Video Antenna
4.
On / Volume Control
11. Battery Compartment
5.
External Antenna Jack
12. Belt Clip
6.
Earphone Jack
13. AC Adapter Jack
7.
Brightness / Tint Button
(base)
10
11
1. Channel Switch (A, B, or C)
7. AC Adapter
2. Antenna
8. ON/OFF Switch
3. Power Indicator
9. Tilt Adjustment Knob. Controls up and
down tilt of camera for optimal viewing
4. Night Vision LED's: Allows Camera to
automatically adjust to darkened room
5. Microphone
10. AC Adapter Jack
11. Base/Wall Mount
AC ADAPTER:
The AC Adapters are a low voltage power source that allows you to use your
household electricity to run the 900 MHz Hand-Held Monitor and Television. The
separate AC Adapters connect to the AC Adapter Jack in the Monitor and Camera . Both
plug into any standard 110 volt electrical outlet in your home.
CAUTION: These adapters were made with a specific design for Safety 1st
900 MHz In Sight Hand-Held TV-Video Monitor. They cannot be used with any other
appliance. Never use a different type of adapter with this monitor.
6. Camera Lens
Page 4
Page 5
Operating Your 900 MHz Hand-Held Monitor and Television
Always remember that you are using public airwaves when you use the Safety 1st 900 MHz Hand-Held Monitor and Television. Sound
and video may be broadcast to other receiving devices. Conversations, even from rooms near the Camera, may be broadcast as well.
CAUTION: To protect your privacy, always turn the Camera off when not in use.
It is possible for the Monitor to pick up sounds or display interference from other signal producing devices including other audio or video
monitors which broadcast in the 900 MHz range. To minimize this potential problem, three independent channels have been provided for
your use.
If you experience interference while using one channel setting, simply switch the Camera and Monitor to another channel. Selecting a
channel is usually a one-time adjustment. If interference persists on all channels, please refer to the Problems and Solutions Guide at the
end of these instructions.
Monitor Reception
Before installing Wall Mount Screw, it is very important to test the video and sound reception of the 900 MHz Hand-Held Monitor and
Television at the following times:
• Before initial use
• Regularly during use
• Whenever you change the location of the Camera or Monitor
Camera Wall Mount Installation
• Using a 3/16” (4.8 mm) drill bit on an electric drill, drill a hole in the wall.
• Place the Wall Anchor in the drilled hole. Tap gently with a hammer on the Wall Anchor until the end of the Wall Anchor is even or flush
with the surface of the wall as shown in Figure A.
• Place the Screw in the Wall Anchor and tighten until there is a 1/4” (6.2 mm) gap between the wall and the Screw head as shown
in Figure B.
Mounting the Camera on the Wall
• Unwrap and fully extend the AC Adapter cord.
NOTE: Two AC Adapters are included in the 900 MHz In Sight Hand-Held TV-Video Monitor. Use the Adapter with the longer cord with
the Camera. Use only the AC Adapters included with the 900 MHz In Sight Hand-Held TV-Video Monitor.
• Plug the jack on the Camera’s AC Adapter cord into the AC Adapter jack on the bottom of the Camera.
• Hold the Camera so the underside of the base/wall mount faces you.
• Insert the AC Adapter cord into the groove on the underside of the Camera base/wall mount as shown in Figure C. Make certain the
AC Adapter cord stays in the groove as you place the Camera on the wall mount Screw.
• Slide the Camera base/wall mount down on the Screw to secure it to the wall as shown in Figure D.
NOTE: If the Camera does not slip easily onto the wall mount Screw, remove the Camera from the wall and slightly loosen the Screw.
• Plug AC Adapter into a standard wall outlet.
• Wrap up and secure any excess AC Adapter cord.
1/4" (6.2 mm)
To Test: It is easiest for two adults to test reception. One adult should be present in the room with the Camera, while the other adult
moves the Monitor to several different locations throughout the house. As with any audio equipment, feedback or a high pitched shrill
sound may occur if the Camera and Monitor are too close to each other. It is important to test sound quality and video reception in each
location in which you intend to use the 900 MHz Hand-Held Monitor and Television.
To test the video reception, the adult present in the room with the Camera should place the Camera in the most appropriate
location for monitoring the baby (on a table top, dresser, or against a wall). Direct the Camera lens toward the area you want to see on
the Monitor screen. (While testing, it may be helpful to place an object, such as a doll or stuffed animal, in the area you want to be
viewing on the monitor.) Check the video reception on the Monitor screen. Adjust the quality of the picture using the brightness
adjustment knob on the back of the Monitor. Make sure you check reception in all areas in which you intend to use both the Monitor and
Camera. The Camera has an Auto Sensor to allow the Camera to see clearly, automatically, even in a completely darkened room. In the
Night Vision mode, the Picture will be black and white.
To test sound reception quality, have the adult present in the room with the Camera speak in both a whisper and a normal
conversation level at the location of the child being monitored. During sound testing, keep in mind the volume of your child’s sounds and
test accordingly. The Monitor must be placed far enough away from the Camera to prevent feedback noise from occurring. Usually this
means placing the Monitor in a different room than the Camera is in.
Grooves
Camera Location and Set Up
You can position and adjust the Camera in a variety of ways to provide the best view of your baby at all times. The Camera can be easily
mounted on a wall, or it can be simply placed on a stable, flat surface, such as a dresser, table top or shelving unit.
IMPORTANT: Once you have selected a location for mounting, TEST the reception of the 900 MHz In Sight Hand-Held TV-Video Monitor
BEFORE INSTALLING any wall mount screws. If interference or other problems occur, please refer to the Problems and Solutions Guide
at the end of these instructions.
WARNING:
Camera Table Top Set Up
In selecting a location to mount the Camera, keep the following things in mind:
• To prevent entanglement, only mount the Camera in a location where it and its A/C adapter cord are OUT OF
REACH OF CHILDREN.
• For best viewing, mount the Camera approximately 6' (2m) away from the child.
• Mount the Camera in a location where the camera lens will have an unobstructed view. Use the tilt and swivel
adjustments to properly aim the Camera.
• Allow adequate ventilation of the Camera when mounted on a wall. DO NOT mount the Camera directly above heating
vents, other heat producing sources or in direct sunlight.
• Make certain that the Camera will be mounted so that the AC adapter cord will reach an outlet. To prevent
entanglement and overheating, NEVER use an extension cord.
Page 6
The Camera can be positioned on any stationary flat surface, such as a dresser, table top or shelving unit. Position the camera
approximately 6' (2M) away from the desired object.
WARNING: TO PREVENT THE RISK OF ENTANGLEMENT, NEVER PLACE THE CAMERA IN CRIB OR PLAYPEN. ALWAYS POSITION
THE CAMERA AND ITS AC ADAPTER CORD OUT OF CHILD’S REACH.
NOTE: Use only the AC adapters included with the 900 MHz In Sight Hand-Held TV-Video Monitor.
• Unwrap and fully extend the AC adapter cord.
• Plug AC Adapter into a standard wall outlet.
• Wrap up and secure any excess AC adapter cord.
Page 7
Monitor Set Up
Camera Operation
The portable Monitor operates by use of 4 AA alkaline batteries (not included) or the AC Adapter cord included with the 900 MHz In Sight
Hand-Held TV-Video Monitor for AC Monitor power.
REMEMBER: Use only the AC Adapter included with the 900 MHz In Sight Hand-Held TV-Video Monitor for power.
IMPORTANT NOTES:
• Keep the Monitor out of reach of children.
• Keep the Monitor upright for best reception.
To Adjust:
• Turn the tilt adjustment knob counter-clockwise just enough to loosen the camera. Move the camera up or down to the
desired position and tighten the camera in place by turning the tilt adjustment knob clockwise. DO NOT OVER TIGHTEN.
• Swivel the camera from side-to-side to obtain desired position.
NOTE: Camera will turn approximately 180°. Do not attempt to turn it past 180°.
DO NOT attempt to adjust the small antenna on Camera or Monitor.
Installing the Batteries
Monitor Operation
WARNING
• Do not submerge any part of TV/Video Monitor in water.
• Remove batteries when stored for long periods of non-use.
• Remove spent batteries promptly.
• Rechargeable batteries may be used but must not be
recharged in the unit.
• Only an adult should charge rechargeable batteries.
• Non-rechargeable batteries must not be recharged.
• DO NOT short circuit supply terminals.
• Insert batteries oriented for the correct polarity
(as shown in battery compartment).
• Set Camera and Monitor to the same channel.
• Slide the ON/OFF switch on the top of the Camera to the “ON” position.
STEP 1 Locate the battery compartment door on the back of the TV/Monitor,
and unscrew the battery door in the direction of the arrow to remove as
shown in Figure A.
STEP 2 Install 4 AA alkaline batteries (not included) into the battery
compartment as shown. Ensure the (+) and (-) symbols match those
shown in the battery compartment.
• Place the Monitor where you can see and hear it.
• To use household power, unwrap and fully extend the AC adapter cord, and plug the jack on the Monitor’s AC Adapter cord into
the AC adapter jack (DC 12V IN) on the side of the Monitor. Then plug the AC adapter into a standard wall outlet. Be certain to
wrap up and secure any excess AC adapter cord.
• Turn the Monitor “ON” by:
-Sliding the Mode Switch to Camera.
-Sliding the channel switch to either A, B or C to match the camera setting.
• Adjust the volume rotary dial to a comfortable sound level.
• If you experience interference switch both the Camera and the Monitor to another channel using the Channel Selector.
To Adjust Brightness and Tint:
• To adjust brightness, press the Brightness / Tint Button on top of the TV-Video Monitor. Then use the TV Tuning / Brightness
Adjuster Buttons to make the picture lighter or darker as needed.
• To adjust tint, press the Brightness / Tint Button twice. Then use the TV Tuning / Brightness Adjuster Buttons to change the
tint as needed.
Note: The Camera has Night Vision LED’s that allow the Camera to automatically adjust to a
darkened room. The Monitor will automatically switch to black and white reception at this
time, providing you with a clear view of baby at night.
Using the Audio Only Feature
The Audio Only feature allows the Monitor to be used without the picture in a sound only mode. To use the Audio Only
feature, set the Mode Switch on the bottom of the Monitor to “AUDIO”. This will allow the Monitor to receive sound only
without picture.
STEP 3 Re-align battery door and screw into position.
NOTE: The TV/Monitor will not work in battery mode if batteries are not
installed properly.
After several hours of continuous use, the Power On/Low Battery LED Light
may turn solid red, indicating that the batteries need to be replaced. Please
follow instructions noted above for the installation of new batteries.
NOTE: We recommend using household electrical power when possible to
conserve battery power.
Using the Monitor as a Television
1. Switch the TV/CAMERA/AUDIO mode to TV.
2. Tune the TV to the desired station using the TV Tuning / Brightness Adjuster Buttons. You can either depress the Buttons quickly to
move through the channels one at a time, or hold the Button down to scroll through the channels.
3. Adjust volume.
4. Adjust the telescoping antenna for best picture.
Page 8
Page 9
Troubleshooting
Problem
Possible Cause
Solution
Camera’s power indicator light
does not light
Camera is not turned “ON”
Power is turned off
Slide the ON/OFF switch to the
“ON” position
Problem
Possible Cause
Solution
Sound, but no picture (continued)
Monitor is set to “Audio”
Adjust switch to “TV” or “Camera”
mode
Signal interference due to
other nursery monitor,
cordless telephones, etc.
Test reception by moving the Camera
and/or Monitor to different locations
throughout the house. Relocate the
Camera and/or Monitor
Make certain house fuses and circuit
breakers are on
Make certain that any light switches
that control the power flow to the wall
outlet are on
Monitor screen does
not illuminate and no sound
AC Adapter not
properly connected
Check AC Adapter jack-to-socket and
plug-to-outlet connections
Monitor is not turned “ON”
for video or television use
Turn the Monitor on. Slide Mode
Switch to Camera for Monitor use or to
TV for television use. May be in Audio
Only mode
Batteries may be dead
Replace batteries, 4AA
Power is turned off
Make certain house fuses and
circuit breakers are on
Picture, but no sound
No sound or picture
Check AC Adapter jack-to-socket
and plug-to-outlet connections. Be
certain it is plugged into the AC
jack (DC 12V IN)
Channel switches are not on
the same setting (A, B, C)
Check the channel switches on the
Camera and the Monitor to confirm they
are on the same channel (A, B, C)
Signal interference due to
other Monitors, cordless
or cellular telephones, etc
Change the channel setting on both
the Camera and the Monitor
Adjust the volume control on the Monitor.
Change channel setting to both the
Camera and Monitor
Picture flickers in low light
Make certain that any light switches
that control the power flow to the
wall outlet are on
AC Adapter not
properly connected
Volume not turned up
Out of range
Bring Camera unit closer to Monitor
Object too close to Camera
Remove objects that are too
close to the Camera or move
the Camera/Monitor
Camera or Monitor near
metal concentration
Test reception by moving Camera
and/or Monitor to different locations
throughout the house
Signal interference due to
other monitors, cordless
or cellular telephones, etc.
Change the channel setting on the
Camera and Monitor
Identify and eliminate the source
of interference
Audio feedback (squealing)
Dark picture at night
Monitor is too close to
the Camera
Move the Monitor further away from
the Camera
Volume is set too high
Lower the volume on the Monitor
Night Vision LED’s not
functioning properly
With room lights off, check Camera to be
certain that all Night Vision LED's are
glowing red if not, contact the Consumer
Relations Department at Safety 1st
Turn both the TV and Camera off. Wait a
moment and turn them back on
Sound, but no picture
In TV Mode, may need to
change channels
Use TV Tuning/Brightness Adjuster
Buttons to tune the television.
In Monitor Mode, may need
to adjust brightness
Press Brightness Button to activate. Then
use TV Tuning/Brightness Adjuster Buttons
to adjust brightness as needed
Camera or Monitor near
metal concentration
Test reception by moving the
Monitor closer to the Camera or by
moving the Camera and/or Monitor
to different locations throughout
the house. Relocate the Camera
and/or Monitor
Warranty Information
ONE (1) YEAR LIMITED WARRANTY
Safety 1st, Inc., warrants to the original owner of this product that the Nursery Monitor is free from defects in materials and
workmanship for a period of one (1) year from the date of the original purchase. If this monitor fails to function when used as
directed under normal conditions, within the one (1) year period, Safety 1st will either repair or replace the product at our option,
free of charge, when it is returned complete and in its original packaging, prepaid postage, and insured to Safety 1st Consumer
Relations Department (see appropriate address on next page). Product must be accompanied by a proof of purchase, either a bill of
sale, receipted invoice, or other proof that the monitor is within the warranty period. Safety 1st will bear the cost of repairing or
replacing the product and shipping it back to you.
This warranty does not apply to a Nursery Monitor that has been damaged as a result of improper maintenance, accidents,
improper voltage supply or other misuse. The warranty is also void if the owner repairs or modifies the product in any way.
Safety 1st is not liable for any incidental or consequential damages with regard to this product. The warranty also excludes any
liability other than what is stated above. No other warranties are given.
LEGAL RIGHTS VARY FROM STATE TO STATE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
IMPORTANT NOTE: ONLY USE THE ADAPTERS SUPPLIED FOR THIS NURSERY MONITOR.
USE OF OTHER ADAPTERS WILL VOID THIS WARRANTY.
Page 10
Page 11
900 MHz Hand-Held Monitor and Television
IMPORTANT!
Television and Baby Monitor in one!
No. 48020
Owner’s Manual
Please do not return this product to the store!
Your questions and comments are important to us!
Thank you for purchasing this quality product from Safety 1st. We are confident you will be
pleased with its many features and performance. If you are having any problems assembling,
installing, or using this product, please call us. We will be very happy to answer any questions
that you may have. Many times there is a simple solution to any problem that may occur.
Talking to us directly will be convenient and save you time.
Call our Consumer Relations Department toll-free at (800) 723-3065;
in Canada call (800) 721-3389
from 9:00 am to 5:00 pm (EST) Monday - Friday.
We will gladly answer any and all of your questions about this product.
Thank you for purchasing the Safety 1st 900 MHz Hand-Held Monitor
and Television. This extraordinarily versatile, state-of-the-art system features
full-color viewing when used as a monitor during the day. At night, Infra Red
LED’s provide you with a clear black and white image of baby in a darkened
room. The 900 MHz Hand-Held Monitor and Television can also be used as a
full-color TV, for years of added use. This unique monitor also features 3
channel selections for optimal performance as well 900MHz RF technology for
superior clarity and additional privacy. Both the Camera and the Video
Monitor/TV are AC powered for use with convenient household electricity, and
the Monitor/TV can also be powered with 4 AA alkaline batteries (not
included) for additional portability.
If you have any questions or comments, please call our toll free Consumer Relations number. If you are not completely
satisfied, please return with proof of purchase to:
Safety 1st Inc., 45 Dan Road, Canton, MA 02021 USA 800-723-3065
Safety 1st Canada Inc., 84 rue Deslauriers, Ville St-Laurent, Quebec H4N 1X1 Canada 800-721-3389
Safety 1st Europe Ltd., Isopad House, Shenley Road, Borehamwood, Hertfordshire WD61TE UK +44(0)20 8236 0707
Made in CHINA to Safety 1st quality specifications. ©2000 Safety 1st, Inc.
www.safety1st.com
Styles and colors may vary
4/00
We are sure that you will find the 900 MHz Hand-Held Monitor and
Television convenient and easy to use. To ensure that you benefit from all of the
great features that your monitor offers, and to make sure that you use it properly,
we urge you to:
Please read all instructions carefully before using this product. Keep these instructions for future
reference. If you have any questions, please call our Consumer Relations number at (800)723-3065.
In Canada call (800)721-3389.
CAUTION:
• THE 900 MHz HAND-HELD MONITOR AND TELEVISION IS NOT INTENDED TO REPLACE
RESPONSIBLE AND PROPER PARENTAL SUPERVISION.
• YOU SHOULD CHECK YOUR CHILD’S ACTIVITY AT REGULAR INTERVALS AS THIS MONITOR WILL
NOT ALERT PARENTS TO THE SILENT ACTIVITIES OF A CHILD.
Page 1

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2000:04:10 13:15:02
Producer                        : Acrobat Distiller 4.0 for Macintosh
Modify Date                     : 2000:04:10 13:15:09-04:00
Page Count                      : 6

EXIF Metadata provided by EXIF.tools