Dream Technology QL200 Bluetooth Mono Headset User Manual

Dream Technology Co., Ltd. Bluetooth Mono Headset Users Manual

Users Manual

Safety Instruction & Caution1. Keep the device from heating sources as it may explode.2. Avoid dropping and heavy impact to the device. This coulddamage or shorten the life span of the product.QL200User Manual3. Do not attempt to disassemble or repair the device, thismay void the warranty.4. If the device gets wet, turn off the power.5D t h i l d t t l thi d i5. Do not use chemical products to clean this device.6. The Charger is to be provided by the manufacturer.7. When storing for long period of time, make sure to keepdevice in a place that is room temperature and drydevice in a place that is room temperature and dry.8. If any medical equipment is used, make sure that thedevice is well protected from electric waves, if necessary,get help from medical doctorget help from medical doctor.9. This product is compliant with bluetooth version 2.0 specification. For the information on compatibility, contact the manufacturer of the device or customer servicecontact the manufacturer of the device or customer servicecenter.10. Some countries may prohibit wearing the headset on twoears while driving. Comply with the laws and regulationsrelated to the use of mobile phone while driving within yourstate or province.
Package ContentsFeaturesSEDSpeakerStatus LEDVolume Up ButtonBluetooth Headset Charger User ManualMicrophone Volume Down ButtonMultifunction ButtonExtra Ear Pad Ear LoopButtonCharging Portp
Charging Power On / OffThis headset has its own battery inside. The internal batterymust be fully charged before first time use. Function Instruction Signal soundIndicator light●Charging & Operating TimeCharging Time Talk Time Standby TimeOnPress and hold downMultifunction buttonuntil blue light flashes(Approx. 3 seconds)Melodytone beginsBlue lightflashes5 times2 Hours 4 Hours 80 HoursOffPress and hold downMultifunction buttonuntil red light flashesMelodytoneRed lightflashes•Charging in progress : Red light on•Charging completed : Red light offuntil red light flashes(Approx. 4 seconds) ends 5 times●Indicator lightsIndicator lights Headset State●gBlue and red light in turn PairableBlue light flashes every 5 times ConnectableBlue light flashes twice every 5 times Standby
Pairing ●Connection (Auto-Pairing)If th d i h b i d ith th h d t b f●PairingPairing headset with mobile phone before using the device.Pairing is a process which establishes a new relationshipIf the device has been paired with the headset before(if there has been a connection once) re-establishing a connection is automatically requested when the headset isswitched on①Pairing is a process which establishes a new relationship between two Bluetooth enabled devices through the exchangeof a link keyswitched on.●Reconnection①Make sure that the headset is turned off.②Set the headset to a pairable statePress and hold down multifunction button for 7 seconds until the blue and red light in turn.You can press multifunction button once to reconnect manually. Reconnection is needed when you are out of range andthen come back into rangetebueaded gt tu※If the headset is turned on, press and hold down multifunctionbutton for 4 seconds until the blue and red light in turn.③Search for the headset on your mobile phone according to the then come back into range.※When the headset is out of range, the red light flashes once10 times and warning sound tone begin 1 second.guide of the phone. ④When the mobile phone finds QL200, pair it with the phone.⑤In case the mobile phone asks passkey or PIN, enter 00000000to connect the two devices.When connected successfully, the blue indicator flashes twice every 5 seconds.When failed to connect or the headset is in connectable state due to not idihi3i hbl idi fl h dIfhipaired within 3minutes, the blue indicator flashes every 5 seconds. If this situation is met, please re-power the headset and restart connecting
Functions ●Accept a callTap the multifunction button once after the tone (incoming)●Make a call-. Last number Redialing●Reject a callPress and hold down the multifunction button(2d)Tapping the multifunction button once displays the list (entries of all calls), and tap the multifunction button to make a call)(approx. 2 seconds).Notes) The reject call function can be used only if the mobile phone has a reject call feature. The headset must be registered under a “handsfree Notes) For some mobile phones, calls can be directly made without displaying the list.-Voice Dialservice”●Adjust volumeTap the volume up or down button accordingly-. Voice DialPress and hold down the multifunction button approx. 2 seconds, and say the person’s name.Notes) Voice dial can be used only if the mobile phoneTap the volume up or down button accordingly.●mute On / Off microphonePress and hold volume up button or volume down buttonNotes) Voice dial can be used only if the mobile phonehas voice recognition feature and the headset is registered under handsfree service, Please see the user guide of your phone for detail.pfor 2 seconds, in this case a beep sound will be heard twice 10 seconds interval to inform you that the microphone is in mute on mode.●End a callTap the multifunction button onceMute off mode is the same.●Call transferTap the multifunction button onceTap the multifunction button once.Tap the multifunction button once.Notes) You can switch to the headset only once when youreceive a call from the mobile phone
●Call waitingPress and hold down the volume up button until a low pitch Specificationsbeep sound is heard twice (approx 4 seconds). This will accept the incoming call while talking.The previous call will be put on hold.Bluetooth Compliance Ver 2.0 Supported Profile Handsfree / HeadsetTo switch back, press and hold down volume up button until the same sound is heard.Notes) The headset must be registered under theFrequency Band 2,402~2,480 MHzTx Power -6~4 dBm (Class 2)handsfree service●3 Way CallTo places all active calls (if any exist) on hold and acceptsMain Chip Set CSR BlueCore 04 QFN ROMOperating RangeUp to 10m (33 feet)To places all active calls (if any exist) on hold and acceptsthe other (held or waiting) call, press and hold downmultifunction button for 2 seconds.To release all active calls (if any exist) and accepts thepggp()Talk Time up to 4 hoursStandby Timeup to 80 hoursTo release all active calls (if any exist) and accepts the other (held or waiting) call, tap multifunction button once.Notes) 3 way call function can be used only when the service provider provides the 3 way call service.In addition according to the mobile phone andStandby Timeup to 80 hoursDimensions (mm) 18(W) X 48.5 (L) X 10.5 (H)Weight10gIn addition, according to the mobile phone and network specification, may be different. Weight10g
Commands Summary TableState LED Display Audio (beep)Power on -OffBlue light flashes 5 times(Blue light10 seconds interval) power on tone Press and hold down MFB for 3 secondsPower off - On Red light flashes 5 times Power off tone Press and hold down MFB for 4 secondsOff Press and hold down MFB for 7 secondsAct io nFunctions Mobile PhoneStateBluetooth HeadsetOn Press and hold down MFB for 4 secondsPairing Success(Connected) On On Blue light flashes 5 times(Not mandatory) Connectiing toneStandby On On Blue light flashes 2 times(5 seconds interval)OnOnRed light blinks once for 10 secondsWarnig tone()Pairing Mode Blue / Red light in turn pairing mode toneOnLink Loss (out of ranges)OnOnRed light blinks once for 10 seconds(1 second)Make a call On (Dials number) On Connectiing tone Tap the MFB onceVoice dial callOn in idle(Hands Free Profile) On Connectiing tone Press and hold down MFB for 2 secondsAccept a callOn On Connectiing tone Tap the MFB onceLast number redialOnOnConnectiing tone1) Tap the MFB one : display the lists(entry of all calls)Last number redialOnOnConnectiing tone (entry of all calls)2) Tap the MFB one : make a callEnding a callOn On_Talk Ending tone Tap the MFB onceRejec a callOn On_Ringing Ending tone Press and hold down MFB for 2 secondsCall waiting On – in call(2nd call coming in)(Hands Free Profile)On_Talk Connectiing tone Press and hold down Vol-Up button for 4 secondsduring callingTap the MFB onceTransfer call from phone toheadsetOn On_Talk Connectiing toneTap the MFB once(can switch to the headset only once when you receivea call from the mobile phoneMute on microphoneOn On_Talk short time tone twice(10 seconds interval)Press and hold volume up button or volume downbutton for 2 seconds while callingMute off microphoneOn On_Talk mute off tone Press and hold volume up button or volume downbutton for 2 secondsTo places all active calls (if any exist) on holdand accepts the other (held or waiting) call,press and hold down multifunction button for3 Way callOn On_Talkpress and hold down multifunction button for2 seconds.To release all active calls (if any exist) and acceptsthe other (held or waiting) call, tap multifunctionbutton once.Charging progress -Off Red LED OnCharging completed -Off LED OffLow BatteryLow Battery(under 3.7V)- On Red light blinks warnig toneVolume maximum or minimumis reachedOn On short time warning tone once(Not mandatory) press the Volume up button or Volume down buttonRF Test mode - On Violet LED On1) Press the Vol-Up button2) Press the Vol-Down button3) Press the Vol-Up button and MFB
FCC(F d l C i ti C i i )FCC (Federal Communications Commission) This device complies with Part 15 of the FCC`s Rules Operation is subject to the following twoThis device complies with Part 15 of the FCC s Rules. Operation is subject to the following two Conditions:1. This device may not cause harmful interference, and2. This device must accept ant interference received, including interference that may cause undesirable operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference toinstalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:the interference by one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connectedreceiver is connected.– Consult the dealer or an experienced radio/TV technical for helpWARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. yp qp g

Navigation menu