Dream Technology QL200 Bluetooth Mono Headset User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1002321
Application ID	TblTZkvWc1NclmNmA7BvzA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.91kB (186375 bits)
Date Submitted	2008-09-17 00:00:00
Date Available	2009-03-16 00:00:00
Creation Date	2008-09-11 16:24:38
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2008-09-11 16:24:38
Document Title	Microsoft PowerPoint - QL200 (USER MANUAL).ppt [호환 모드]
Document Creator	PScript5.dll Version 5.2
Document Author:	seonayoung

Safety Instruction & Caution
1. Keep the device from heating sources as it may explode.
2. Avoid dropping and heavy impact to the device. This could
damage or shorten the life span of the product.
3. Do not attempt to disassemble or repair the device, this
QL200 User Manual
may void the warranty.
4. If the device gets wet, turn off the power.
5 D
5.
Do nott use chemical
h i l products
d t tto clean
thi
this d
device.
6. The Charger is to be provided by the manufacturer.
7. When storing for long period of time, make sure to keep
device in a place that is room temperature and dry.
dry
8. If any medical equipment is used, make sure that the
device is well protected from electric waves, if necessary,
get help from medical doctor.
doctor
9. This product is compliant with bluetooth version 2.0
specification. For the information on compatibility,
contact the manufacturer of the device or customer service
center.
10. Some countries may prohibit wearing the headset on two
ears while driving. Comply with the laws and regulations
related to the use of mobile phone while driving within your
state or province.
Features
Package Contents
Speaker
Status
LED
ED
Bluetooth Headset
Charger
User Manual
Volume Up Button
Microphone Volume Down Button
Multifunction
Button
Charging
Port
Extra Ear Pad
Ear Loop
Charging
Power On / Off
This headset has its own battery inside. The internal battery
must be fully charged before first time use.
Function
Instruction
Signal
sound
Indicator
light
On
Press and hold down
Multifunction button
until blue light flashes
(Approx. 3 seconds)
Melody
tone
begins
Blue light
flashes
5 times
Off
Press and hold down
Multifunction button
until red light flashes
(Approx. 4 seconds)
Melody
tone
ends
Red light
flashes
5 times
● Charging & Operating Time
Charging Time
Talk Time
Standby Time
2 Hours
4 Hours
80 Hours
• Charging in progress : Red light on
• Charging completed : Red light off
● Indicator lights
Indicator lights
Blue and red light in turn
Blue light flashes every 5 times
Blue light flashes twice every 5 times
Headset State
Pairable
Connectable
Standby
Pairing
● Pairing
● Connection (Auto-Pairing)
If th
the d
device
i h
has b
been paired
i d with
ith the
th headset
h d t before
b f
(if there has been a connection once) re-establishing a
Pairing headset with mobile phone before using the device.
connection is automatically requested when the headset is
Pairing is a process which establishes a new relationship
switched on
on.
between two Bluetooth enabled devices through the exchange
of a link key
● Reconnection
① Make sure that the headset is turned off.
You can press multifunction button once to reconnect
② Set the headset to a pairable state
manually.
Press and hold down multifunction button for 7 seconds until
tthe
eb
blue
ue a
and
d red
ed light
g t in tu
turn.
Reconnection is needed when you are out of range and
then come back into range
range.
※ If the headset is turned on, press and hold down multifunction
button for 4 seconds until the blue and red light in turn.
③ Search for the headset on your mobile phone according to the
guide of the phone.
④ When the mobile phone finds QL200, pair it with the phone.
⑤ In case the mobile phone asks passkey or PIN, enter 0000
to connect the two devices.
When connected successfully, the blue indicator flashes twice every 5
seconds.
When failed to connect or the headset is in connectable state due to not
paired
i d within
i hi 3
3minutes,
the
h bl
blue iindicator
di
flflashes
h every 5 seconds.
d If this
hi
situation is met, please re-power the headset and restart connecting
※ When the headset is out of range, the red light flashes once
10 times and warning sound tone begin 1 second.
Functions
● Make a call
-. Last number Redialing
● Accept a call
Tap the multifunction button once after the tone (incoming)
● Reject a call
Press and hold down the multifunction button
Tapping the multifunction button once displays the list
(approx.
2 seconds).
d )
(entries of all calls), and tap the multifunction button to
Notes) The reject call function can be used only if the
make a call
Notes)) For some mobile phones, calls can be directly
mobile phone has a reject call feature.
The headset must be registered under a “handsfree
service”
made without displaying the list.
● Adjust volume
- Voice Dial
-.
Press and hold down the multifunction button approx.
2 seconds, and say the person’s name.
Notes) Voice dial can be used only if the mobile phone
Tap the volume up or down button accordingly
accordingly.
● mute On / Off microphone
Press and hold volume up
p button or volume down button
has voice recognition feature and the headset is
for 2 seconds, in this case a beep sound will be heard
registered under handsfree service,
twice 10 seconds interval to inform you that the
Please see the user guide of your phone for detail.
microphone is in mute on mode.
Mute off mode is the same.
● End a call
Tap the multifunction button once
once.
● Call transfer
Tap the multifunction button once
once.
Notes) You can switch to the headset only once when you
receive a call from the mobile phone
● Call waiting
Specifications
Press and hold down the volume up button until a low pitch
beep sound is heard twice (approx 4 seconds).
Bluetooth Compliance
Ver 2.0
This will accept the incoming call while talking.
The previous call will be put on hold.
Supported Profile
Handsfree / Headset
Frequency Band
2,402~2,480 MHz
To switch back, press and hold down volume up button
until the same sound is heard.
Notes) The headset must be registered under the
Tx Power
-6~4 dBm (Class 2)
handsfree service
Main Chip Set
CSR BlueCore 04 QFN ROM
● 3 Way Call
To places all active calls (if any exist) on hold and accepts
the other (held or waiting) call, press and hold down
g Range
Operating
Up
p to 10m ((33 feet))
Talk Time
up to 4 hours
Standby Time
up to 80 hours
multifunction button for 2 seconds.
To release all active calls (if any exist) and accepts the
other (held or waiting) call, tap multifunction button once.
Notes) 3 way call function can be used only when the service
provider provides the 3 way call service.
In addition
addition, according to the mobile phone and
network specification, may be different.
Dimensions (mm)
Weight
18(W) X 48.5 (L) X 10.5 (H)
10g
Commands Summary Table
Functions
Bluetooth Headset
Mobile Phone
State
Action
State
LED Display
Audio (beep)
Power on
Off
Blue light flashes 5 times
(Blue light10 seconds interval)
power on tone
Press and hold down MFB for 3 seconds
Power off
On
Red light flashes 5 times
Power off tone
Press and hold down MFB for 4 seconds
Blue / Red light in turn
pairing mode tone
Off
Pairing Mode
On
Press and hold down MFB for 7 seconds
On
Press and hold down MFB for 4 seconds
Pairing Success
(Connected)
On
On
Blue light flashes 5 times
(Not mandatory)
Standby
On
On
Blue light flashes 2 times
(5 seconds interval)
On
On
Red light blinks once for 10 seconds
On (Dials number)
On
Connectiing tone
Tap the MFB once
On in idle
(Hands Free Profile)
On
Connectiing tone
Press and hold down MFB for 2 seconds
Accept a call
On
On
Connectiing tone
Tap the MFB once
Last number redial
On
On
Connectiing tone
1) Tap the MFB one : display the lists
(entry of all calls)
2) Tap the MFB one : make a call
Ending a call
On
On_Talk
Ending tone
Tap the MFB once
Press and hold down MFB for 2 seconds
Link Loss (out of ranges)
Make a call
Voice dial call
Connectiing tone
Warnig tone
( second)
(1
On
On_Ringing
Ending tone
On – in call
(2nd call coming in)
(Hands Free Profile)
On_Talk
Connectiing tone
Press and hold down Vol-Up button for 4 seconds
during calling
T ransfer call from phone to
headset
On
On_Talk
Connectiing tone
Tap the MFB once
(can switch to the headset only once when you receive
a call from the mobile phone
Mute on microphone
On
On_Talk
short time tone twice
(10 seconds interval)
Press and hold volume up button or volume down
button for 2 seconds while calling
Mute off microphone
On
On_Talk
mute off tone
Press and hold volume up button or volume down
button for 2 seconds
Rejec a call
Call waiting
To places all active calls (if any exist) on hold
and accepts the other (held or waiting) call,
press and hold down multifunction button for
2 seconds.
To release all active calls (if any exist) and accepts
the other (held or waiting) call, tap multifunction
button once.
On
On_Talk
Charging progress
Off
Red LED On
Charging completed
Off
LED Off
Low Battery
(under 3.7V)
On
Red light blinks
On
On
On
3 Way call
Volume maximum or minimum
is reached
RF Test mode
warnig tone
short time warning tone once
(Not mandatory)
Violet LED On
press the Volume up button or Volume down button
1) Press the Vol-Up button
2) Press the Vol-Down button
3) Press the Vol-Up button and MFB
FCC
(F d l C
(Federal
Communications
i ti
Commission)
i i )
This device complies with Part 15 of the FCC`s
FCC s Rules
Rules. Operation is subject to the following two
Conditions:
1. This device may not cause harmful interference, and
2. This device must accept ant interference received, including interference that may cause
undesirable operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions
instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
connected.
– Consult the dealer or an experienced radio/TV technical for help
WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could
y to operate
this equipment
q p
if an unauthorized change
g or modification is made.
lose the authority

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2008:09:11 16:24:38+09:00
Create Date                     : 2008:09:11 16:24:38+09:00
Format                          : application/pdf
Title                           : Microsoft PowerPoint - QL200 (USER MANUAL).ppt [호환 모드]
Creator                         : seonayoung
Document ID                     : uuid:7328a69a-7d0b-4cd7-a4f1-c60319c6e731
Instance ID                     : uuid:3f8eeebd-ec89-419f-9d33-47b3ef15fc04
Page Count                      : 8
Author                          : seonayoung

EXIF Metadata provided by EXIF.tools