Duali DE-630 SMART CARD READER User Manual DE630 user guide
Duali Inc. SMART CARD READER DE630 user guide
Duali >
Users Manual
DE-630 Hardware User’s Manual DUALi Inc. Document Version: 1.0 Last Revised Date: 30 Nov. 2010 Copyright ⓒ 2009 DUALi Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this document in part or as a whole for any purposes other than those for which this document is disclosed. This document is copyrighted and contains confidential information and other intellectual property rights of DUALi Inc. Any unauthorized use, copy, disclosure or distribution constitutes infringement of DUALi’s intellectual property rights. DUALi Inc. reserves the right to make changes to its applications or services or to discontinue any application or service at any time without notice. DUALi provides customer assistance in various technical areas, but does not have full access to data concerning the use and applications of customer's products. Therefore, DUALi assumes no liability and is not responsible for customer applications or software design or performance relating to systems or applications incorporating DUALi products. In addition, DUALi assumes no liability and is not responsible for infringement of patents and/or any other intellectual or industrial property rights of third parties, which may result from assistance provided by DUALi. Composition of the information in this manual has been done to the best of our knowledge. DUALi does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. We have our development center in South Korea to provide technical support. For any technical assistance can contact our technical support team as below; Tel: +82 31 213 0074 e-mail : duali@duali.com DE-630 Hardware User’s Guide Revision History 2010.11.30(Ver. 1.0) : First Release 2011.04.07(Ver. 1.1) : RJ-48 Pin Configuration Change Version : 1.1 DUALi Inc. (http://www.duali.com) DE-630 Hardware User’s Guide Contents Summary........................................................................................................................ 5 Structure......................................................................................................................... 6 2.1 The Structure of equipment.................................................................................... 6 2.2 The block diagram of DE-630 ................................................................................ 7 2.3 Description of main Module ................................................................................... 8 Description of Surface ..................................................................................................... 9 3.1 The picture of device surface ................................................................................. 9 3.2 Communication Cable(RS-232 and RS-485)...................................................... 9 3.3 The size of terminal............................................................................................ 9 Connector Pin Assignment ............................................................................................ 10 4.1 RS-232 Connector and Cable ........................................................................... 10 4.2 RS-485 Connector and Cable ........................................................................... 10 Description of Electricity ................................................................................................ 12 5.1 The Description of power..................................................................................... 12 5.2 The using electric current .................................................................................... 12 5.3 The Description of RS-232 communication........................................................... 12 Description of Function.................................................................................................. 12 6.1 Protocol Specification .......................................................................................... 12 6.2 Firmware Download ............................................................................................ 12 Property ....................................................................................................................... 12 7.1 Environment to use ............................................................................................. 12 7.2 Environment to keep ........................................................................................... 12 Warning and Notice....................................................................................................... 12 Version : 1.1 DUALi Inc. (http://www.duali.com) DE-630 Hardware User’s Guide 1 Summary ITEM CPU Program Memory 사양 비고 STM32F103ZCT6 (ARM Cortex_M3, 144pin) ST 256KBytes FLASH (default) On chip Up to 8Mbytes external Flash Option (1M,2M,4M,8M) Data Memory 48KBytes SRAM (default) On chip Up to 8Mbytes external PSRAM Option (1M,2M,4M,8M) DISPLAY 4 Status LED 4 color 128*64 Graphic LCD (Yellow green) Communication RS-232 - default Decide when order RS-485 - optional BUZZER Magnetic Buzzer RF CARD Frequency : 13.56MHz Speed : 106,212,424,848Kbps ISO-14443 A/B ,MIFARE SAM 4 SAM slots Class A and B, T=0 and T=1 Input Power Version : 1.1 Adapter DC 12V (RS-232, RS-485) DUALi Inc. (http://www.duali.com) DE-630 Hardware User’s Guide 2 Structure 2.1 The Structure of equipment - DE-630 itself contains all circuits include antenna, 4 SAM connectors. - User can order RS-232 version or RS-485 version.(Communication Cable is different) (RS-232 or RS-485) POS (Adaptor) (OR) Host PC Version : 1.1 DUALi Inc. (http://www.duali.com) DE-630 Hardware User’s Guide 2.2 The block diagram of DE-630 POWER ANTENNA (DC 12V) Buzzer LCD(128*64 graphic) Battery RF CHIP(U9) STM32F103 RC632 4 * 상태 Tamper 48Kbytes SRAM, switch 84bytes Battery backup SRAM Nor Flash 13.56 (256Kbytes Flash, 4 * SAM PSRAM MHz Version : 1.1 12 32.768 MHz kHz RS-232 RS-485 DUALi Inc. (http://www.duali.com) DE-630 Hardware User’s Guide 2.3 Description of main Module CPU: 32bit RISC ARM core CPU, It is stm32f103 which is ARM-based 32-bit MCU with Flash. This CPU has 256Kbyte Flash memory, 48Kbyte SRAM. MFRC531 RF IC: This RF IC can control RF card like MIFARE card, type A/B card simultaneously. Version : 1.1 RS-232 Driver: It’s a Communication part for RS-232 communication. RS-285 Driver: It’s a Communication part for RS-485 communication. SAM part: It can control 4 SAMs. And each slot can be operated independently. LED: It has 4 LEDs to display status of communication and card process. LCD : DE-630 has 128*64 graphic LCD Module Battery: It maintains RTC and battery backup SRAM while power is not supplied. Tamper switch: Erase security memory when case is opened. Nor Flash: optional flash memory for non-volatile data. PSRAM: optional SRAM for user memory. DUALi Inc. (http://www.duali.com) DE-630 Hardware User’s Guide 3 Description of Surface 3.1 The picture of device surface 3.2 Communication Cable(RS-232 and RS-485) (Connector for RS-232 and RS-485 version) 3.3 Default: RS-232 version Option1: RS-485 version Cable assembly from this connector to POS is optional. The size of terminal Version : 1.1 DE-630 :95(W) * 138(L) * 20(H)mm DUALi Inc. (http://www.duali.com) DE-630 Hardware User’s Guide 4 Connector Pin Assignment 4.1 RS-232 Connector and Cable RJ-48 Pin No. Description DC POWER(DC 12V) DC POWER(DC 5V) TxD(to Host Rx) NC RxD(to Host Tx) NC GND NC To DC Jack To DC Jack DC JACK Diameter = 2mm DC + (12V) Diameter = 6.5mm DC – (GROUND) 4.2 RS-485 Connector and Cable RJ-48 Pin No. Description DC POWER(DC12V) DC POWER(DC 5V) NC Data+ NC Data- GND NC To DC Jack To DC Jack - Communication type between RS-232 and RS-485 should be decided before making Version : 1.1 10 DUALi Inc. (http://www.duali.com) DE-630 Hardware User’s Guide order. - Its default communication method is RS-232. - DC jack’s connection is same with RS-232 version. Version : 1.1 11 DUALi Inc. (http://www.duali.com) DE-630 Hardware User’s Guide 5 Description of Electricity 5.1 The Description of power 5.2 Input power1 : 12V Adaptor (higher than 300mA) The using electric current Normal 12V, 130mA under MAX 5.3 12V, 200mA under The Description of RS-232 communication 115200bps, 8 data, no parity, 1 stop bit 6 Description of Function 6.1 Protocol Specification Refer to protocol specification for detail function. ( provide on request) 6.2 Firmware Download Refer download manual. (provide on request) 7 Property 7.1 Environment to use Temperature to use : -10 ~ 60 ℃ Humidity to use : 30 ~ 90 % (relative humidity) 7.2 Environment to keep Temperature to keep : -20 ~ 80 ℃ Humidity to use : 30 ~ 90 % (relative humidity) 8 Warning and Notice For indoor use only. This product is affected by an element like metal or Magnetism. So one has to take precautions. Version : 1.1 This device is not waterproof. 12 DUALi Inc. (http://www.duali.com) DE-630 Hardware User’s Guide EU This product is CE marked according to the provision of the R&TTE Directive (99/5/EC). Here by DUALi Inc. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. FCC STATEMENT CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Version : 1.1 13 DUALi Inc. (http://www.duali.com)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : pttno2 Create Date : 2012:04:24 16:26:07+09:00 Modify Date : 2012:04:24 16:26:07+09:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Acrobat Distiller 9.3.3 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Microsoft Word - DE630_user guide.doc Creator : pttno2 Document ID : uuid:77e71764-8287-4efe-8598-7924800e2204 Instance ID : uuid:428feb64-5ffc-4bcb-bb58-39539ce6762d Page Count : 13EXIF Metadata provided by EXIF.tools