Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2662522 |
| Application ID | R5zdZolrkNtY50BqAnL0bg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 88.47kB (1105840 bits) |
| Date Submitted | 2015-06-30 00:00:00 |
| Date Available | 2015-06-30 00:00:00 |
| Creation Date | 2015-05-26 13:01:00 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2015-06-25 10:44:22 |
| Document Title | Microsoft Word - iTOUCH_POP_V2_ì˜ë¬¸ë©”뉴얼.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | user |
ITOUCH_POP2 Specification DUALi Inc. Document Number: EP01-14-004 Document Version: 1.0 Last Revised Date: 11th Dec. 2014 Copyright ⓒ 2014 DUALi Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this document in part or as a whole for any purposes other than those for which this document is disclosed. This document is copyrighted and contains confidential information and other intellectual property rights of DUALi Inc. Any unauthorized use, copy, disclosure or distribution constitutes infringement of DUALi’s intellectual property rights. FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: SWUITOUCHPOPV2 WARNING! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. RF EXPOSURE WARNING! This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. DUALi Inc. reserves the right to make changes to its applications or services or to discontinue any application or service at any time without notice. DUALi provides customer assistance in various technical areas, but does not have full access to data concerning the use and applications of customer's products. Therefore, DUALi assumes no liability and is not responsible for customer applications or software design or performance relating to systems or applications incorporating DUALi products. In addition, DUALi assumes no liability and is not responsible for infringement of patents and/or any other intellectual or industrial property rights of third parties, which may result from assistance provided by DUALi. Composition of the information in this manual has been done to the best of our knowledge. DUALi does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. We have our development center in South Korea to provide technical support. For any technical assistance can contact our technical support team as below; Tel: +82 31 213 0074 e-mail : lab@duali.com iTOUCH_POP2 Product Specification Revision History Version. 1.0 2014.12.11 (Ver. 1.0) : Release DUALi Inc. (http://www.duali.com) iTOUCH_POP2 Product Specification Contents Introduction............................................................................................................................... 5 Components Confirmation ......................................................................................................... 6 2.1 Product Components....................................................................................................... 6 2.2 Block Diagram ................................................................................................................ 7 2.3 Block Diagram specification ............................................................................................. 8 2.4 Exterior ........................................................................................................................... 9 2.5 PCB.............................................................................................................................. 10 2.6 Product Size ................................................................................................................. 11 Power & Interface Specification ............................................................................................... 12 3.1 Power Specification ....................................................................................................... 12 3.2 Electric Current Specification ......................................................................................... 12 3.3 RS-232 Interface Specification ....................................................................................... 12 3.4 USB Interface Specification ........................................................................................... 12 3.5 TCP/IP Interface Specification ....................................................................................... 12 3.6 WI-FI Interface Specification .......................................................................................... 12 Configuration for Door Lock Control ......................................................................................... 13 4.1 POP + LOCK ................................................................................................................ 13 4.2 POP + PDU + Deadbolt Lock ......................................................................................... 14 4.3 POP(RS-485) + PDU + Deadbolt Lock ........................................................................... 14 Connector Specification .......................................................................................................... 15 5.1 J6 (MINI USB) – USB_OTG (Outside) ............................................................................ 15 5.2 J17 (USB A TYPE) – USB_HOST (Outside) ................................................................... 15 5.3 J8 (2mm ,3-PIN DIP TYPE, RIGHT Angle) – UART ........................................................ 15 5.4 J7 (1.25mm, 4-PIN SMD TYPE, RIGHT Angle) - DEBUG UART ..................................... 15 5.5 J9 (2mm ,4-PIN DIP TYPE, RIGHT Angle) - RS-485 (Outside)........................................ 16 5.6 J11 (2mm, 7-PIN DIP TYPE, RIGHT Angle) - DOOR (Outside) ....................................... 16 5.7 J12 (2mm, 7-PIN DIP TYPE, RIGHT Angle) - WD_DATA (Outside) ................................. 16 5.8 J4 (2.5mm 2PIN DIP, RIGHT Angle) - POWER (Outside) ............................................... 16 Usage Environment ................................................................................................................ 17 6.1 Recommendable Operating Environment ....................................................................... 17 6.2 Recommendable Storage Environment .......................................................................... 17 Warning and Notice ................................................................................................................ 17 Certification ............................................................................................................................ 17 Version. 1.0 DUALi Inc. (http://www.duali.com) iTOUCH_POP2 Product Specification 1 Introduction iTOUCH pop2 is designed as a wall-mounted smartcard reader suitable for time-attendance, access control, ID check, self-check-in, self-payment system based on Android O/S. iTOUCH pop2 communicates with PC or controller via USB ,TCP/IP, WiFi(wireless LAN) or Bluetooth(option). User can develop their own program by using Android Jellybean CPU 32bit ARM-CORTEX A5 RISC processor Operating frequency Normal. 625MHz Working Memory DDR3 (4Gbit x 2) Program Memory Nand flash (4Gbyte) OS Linux3.0.31 or better, Android 4.2.2 Jellybean Network 10/100M Ethernet Display Camera I/F Up to 833MHz POE Option 480*272 RGB (16.7M colors) 480*3(RGB)*272 with 4.3inch touch panel 1/4-inch 5Mp SOC Digital image sensor Option 5M Pixels,Auto Focus SAM I/F 1 SAMs supported ISO-7816 Sound Stereo Audio Codec Speaker Stereo Output with 1Watts 1ea RS232 1ch with 5V power (Control outdoor Serial Comm. sound) 3ch. RS232 1ch, RS485 1ch Wiegand D0, D1, LED(in) OUTPUT SD/MMC Card Slot Micro SD memory card 1Slot USB OTG USB 2.0 OTG 1ch. USB Host USB 2.0 Host 1ch. RF PN512 with AMP Button 4 Keys Door status check sensor, Open Switch Door control I/F Version. 1.0 Relay(NO, NC, COM), Secure Lock(RS485), Output(PDU) DUALi Inc. (http://www.duali.com) iTOUCH_POP2 Product Specification Wireless LAN Module WIFI IEEE 802.11n/e/i standards up to 150Mbps Operating Powers Option Min 9V, Max 28V (12V DC adaptor) 2 Components Confirmation 2.1 Product Components ① ② ③ ① Reader unit ② WALL Fixer Bracket ③ Screw (2.5*4 / 4 EA) ④ Cable (Provide as your favor) 1) Door cable 2) Wiegand cable 3) PWR cable 4) RS-232 cable 5) RS-485 cable ⑤ 12V DC adaptor Version. 1.0 Please use the approved adapter that satisfies the LPS DUALi Inc. (http://www.duali.com) iTOUCH_POP2 Product Specification 2.2 Block Diagram TFT LCD(4.3”) WIFI USB HUB 1677 Color Touch pad USB Host USB OTG CAMERA Module Ethernet DDR3 (1GByte) Nand Flash (4GByte) RS-485 32bit ARM Micro SD CARD RS-232 Cortex-A5 RISC KEYPAD (4ea) RS-232 Processor DOOR I/F Battery Wiegand RF/SAM Module PN512 SAM Card *1 Version. 1.0 DC/DC DC INPUT CONVERTER (9V~28V) Sound Codecs Speaker DUALi Inc. (http://www.duali.com) iTOUCH_POP2 Product Specification 2.3 Block Diagram specification CPU: ARM CORTEX 32-bit A5 RISC processor TCC8925 Program & Data Memory: NAND Flash 4Gbyte for program running & file system. Operation Memory: 1Gbyte DDR3 SDRAM for rapid operating process LCD: Wide 4.3-inch (16.7M Color TFT LCD) with Touch panel. Camera: Includes Auto Focus and LED for light Speaker: 1W / 8ohm speaker is embedded. RF Module: Using PN512 (Serial Interface on board) and supporting R/W ISO-14443 A/B cards, Mifare, Felica, NFC. SAM Card: It has 1 SAM card slot supporting ISO 7816 and it’s controlled by RF Module part. DC INPUT: 9V~24V, Power consumption is 10W. Required to use 9V-2A, 12V-1.5A, 24V-700mA adaptor or SMPS. SD CARD Slot: It has 1 Micro SD Card Slot for Memory extension. Ethernet: Supports up to 100Mbps. Serial Interface: 1 RS-485, 2 RS-232 port communication interfaces. USB OTG : 1 USB OTG USB HOST: 1 USB Host. These can be sued for extending optional functions such as memory, RF reader. Door Interface: There are RELAY control part for door control, Door open & close status control Input and Exit switch status control Input part. For Secure locking, iTOUCH pop2 must be connected to IO Controller via RS-485. In case of using PDU, 24V LOCK is possible. Wi-Fi: Optional Battery: Use recharge/discharge-able battery to keep RTC. Discharge after 200 hours (8days). Version. 1.0 DUALi Inc. (http://www.duali.com) iTOUCH_POP2 Product Specification 2.4 Exterior < Front > < Rear > Version. 1.0 DUALi Inc. (http://www.duali.com) iTOUCH_POP2 Product Specification 2.5 PCB MAIN Board SD Card Speaker CAMERA Ethernet Board RS-232 SAM Door Control RS-485 Wiegand Debug USB Host DC 12V USB Slave FLASH LED LCD KEY 4EA Version. 1.0 10 DUALi Inc. (http://www.duali.com) iTOUCH_POP2 Product Specification LAN Board RF Board 2.6 Product Size ITOUCH_POP2 (mm) : 185(W) *108(H) * 20.5(D) Thickness (PCB) MAIN Board : 1.0T RF Board : 1.0T LAN Board : 1.0T Version. 1.0 11 DUALi Inc. (http://www.duali.com) iTOUCH_POP2 Product Specification 3 Power & Interface Specification 3.1 Power Specification 12V : 1.5A or above 24V : 700mA or above 3.2 Electric Current Specification 12V : average 400mA 12V : Max 550mA 3.3 RS-232 Interface Specification 8 Data, 1 Stop, No Parity Communication speed: Start with 115200 bps 3.4 USB Interface Specification 3.5 TCP/IP Interface Specification 3.6 10B / 100B both supported WI-FI Interface Specification Version. 1.0 USB 1.1 Full Speed(12Mbps) IEEE 802.11n/e/i standards. 12 DUALi Inc. (http://www.duali.com) iTOUCH_POP2 Product Specification 4 Configuration for Door Lock Control 4.1 POP + LOCK J9 – DOOR PIN Specification RELAY Normal Close Normal Open RELAY COMMOM Door SW GND SENSOR RELAY EXIT LOCK DOOR STATUS GND Normal Close Type LOCK DC+ (12V or 24V) PWR GND LOCK COMMON CONNECTION NORMAL OPEN LOCK(Secure, open when powered) NORMAL CLOSE LOCK(Safe, close when powered) Version. 1.0 13 DUALi Inc. (http://www.duali.com) iTOUCH_POP2 Product Specification 4.2 POP + PDU + Deadbolt Lock 4.3 POP(RS-485) + PDU + Deadbolt Lock Version. 1.0 14 DUALi Inc. (http://www.duali.com) iTOUCH_POP2 Product Specification 5 Connector Specification 5.1 J6 (MINI USB) – USB_OTG (Outside) PIN 5.2 Specification USB 5.0V USB D- USB D+ ID GND 5V not available J17 (USB A TYPE) – USB_HOST (Outside) PIN 5.3 Specification VDD 5.0V USB D- USB D+ GND Description J8 (2mm ,3-PIN DIP TYPE, RIGHT Angle) – UART 20017WR-03 (YEONHO) PIN 5.4 Specification RS-232 TXD RS-232 RXD GND Description J7 (1.25mm, 4-PIN SMD TYPE, RIGHT Angle) - DEBUG UART 12505WR-04 (YEONHO) PIN Version. 1.0 Description Specification NC RS-232 TXD RS-232 RXD GND 15 Description DUALi Inc. (http://www.duali.com) iTOUCH_POP2 Product Specification 5.5 J9 (2mm ,4-PIN DIP TYPE, RIGHT Angle) - RS-485 (Outside) 20017WR-04 (YEONHO) PIN 5.6 Specification RS-485 + RS-485 - Terminating resisters Resistor Terminating resisters Resistor J11 (2mm, 7-PIN DIP TYPE, RIGHT Angle) - DOOR (Outside) 20017WR-07 (YEONHO) PIN 5.7 Specification Relay C Relay O Relay COM Door_sw GND Door_sta GND Description J12 (2mm, 7-PIN DIP TYPE, RIGHT Angle) - WD_DATA (Outside) 20017WR-07 (YEONHO) PIN 5.8 Specification Description PWR_IN NC GND_POWER WD_DATA0 OUTPUT WD_DATA1 OUTPUT LED_IN INPUT BUZ_IN INPUT J4 (2.5mm 2PIN DIP, RIGHT Angle) - POWER (Outside) YMAW025-02 (YEONHO) PIN Version. 1.0 Description Specification PWR_IN GND_POWER 16 Description DUALi Inc. (http://www.duali.com) iTOUCH_POP2 Product Specification 6 Usage Environment 6.1 Recommendable Operating Environment Temperature: -10 ~ 60 ℃ Humidity: 30 ~ 90 % 6.2 Recommendable Storage Environment Temperature: -20 ~ 80 ℃ Humidity: 30 ~ 90 % 7 Warning and Notice Indoor use only (Avoid direct sunlight) Recommended to use 12V, 700mA or above Diameter = 2mm DC + Diameter = 6.5mm DC – (GROUND) Avoid an element like metal or magnetism within 7cm Do not open the product or adjust the antenna part 8 Certification Version. 1.0 KCC, CE, FCC 17 DUALi Inc. (http://www.duali.com)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : user Create Date : 2015:05:26 13:01:00+09:00 Modify Date : 2015:06:25 10:44:22+09:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : user Title : Microsoft Word - iTOUCH_POP_V2_영문메뉴얼.doc Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2015:06:25 10:44:22+09:00 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:08bff982-8f90-4c55-8e49-30caf5c579ac Instance ID : uuid:7e89020c-d531-4089-bd15-ccb6188f6faf Page Count : 18EXIF Metadata provided by EXIF.tools