E Core Technology HL2750 Speaker Mojo II User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2799464
Application ID	U8fpJ5UOeiBhElt7PC2XYA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	156.29kB (1953675 bits)
Date Submitted	2015-11-01 00:00:00
Date Available	2015-11-01 00:00:00
Creation Date	2015-07-14 15:41:10
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2015-09-28 09:06:36
Document Title	User manual
Document Creator	Adobe InDesign CC 2014 (Macintosh)

II
Product Overview
In order to make sure you get the best possible results from your
new Speaker Mojo II, please thoroughly read and carefully follow
all instructions in this User’s Manual or on the product. Keep this
User’s Manual in a convenient location for future reference.
Package Contents:
Speaker Mojo II x 1
Power cradle x 1
Power adapter x 1
Micro USB charging cable x 1
Aux cable x 1
User’s Manual x 1
If any of the above contents were missing or damaged, please
visit bemwireless.com/support/ to obtain a replacement.
Please do not return to Club, please call 855-839-8616 if you have
any questions or issues with the Speaker Mojo II.
Compatibility
All devices enabled with Bluetooth technology, including iPhones,
iPads, iPods, smartphones, laptops, tablets and more.
Also compatible with any device that has a standard 3.5mm
earphone jack such as MP3 players, PSP, mobile phones, etc.
Meet the Speaker Mojo II
Before learning about your Speaker Mojo II, take a moment to
look it over and familiarize yourself with its features.
I MPORTANT : S ELECT S PEAKER MODE P R IOR
TO TURN ING ON
S PEAKER ( S )
Product Interface
Speaker Mojo II
1. Microphone
2. Volume +
3. Volume –
4. Play / Pause /Speakerphone
5. Power Cradle
6. On/ Off switch
7. Bluetooth© indicator
8. Aux in
9. Micro USB power port
10. Power indicator
15
Power Cradle
11. USB port
12. Power Indicator
13. Charging switch
14. Micro USB power port
Stereo Function
15. Stereo (L, M, R) Switch
Important: Select Speaker Mode Prior to turning on Speaker(s)
Charging Modes
1. Direct Speaker Charge
Connect the standard USB end of the
supplied USB cable to a USB power source
(PC, USB power adapter…etc.). Connect
the Micro USB jack to the USB charging
port on the Speaker Mojo II. It will take
about 2 hours to fully charge the Speaker
Mojo II alone.
Charging Indicator Light Modes
Power indicator on Speaker Mojo II
•• Red LED: Speaker Mojo II is charging;
•• No LED: Battery is fully charged
•• Note: When the battery is low, you will hear a tone signaling
you to charge the unit soon
2. Power Cradle Charge
The Power cradle is a backup battery pack
for Speaker Mojo II and your Bluetooth
device. Connect the standard USB end of the
supplied USB cable to a USB power source
(PC, USB power adapter…etc.). Connect the
Micro USB jack to the USB charging port on
the power cradle. The charging indicator will
light up while charging. It will take about 3 hours to fully charge
the power cradle.
Important: Select Speaker Mode Prior to turning on Speaker(s)
Charging Modes (Cont.)
Indicator on power cradle
•• Red LED : Charging, it will go off when it is fully charged;
•• Blue LED : power output is on.
3. Wireless Conductive Charging via Power Cradle
Connect the standard USB end of the
supplied USB cable to a USB power
source (PC, USB power adapter…
etc.). Connect the Micro USB jack
to the USB charging port on the
power cradle. The charging indicator
will light up while charging. If you
put Speaker Mojo II onto the power
cradle, it will charge them both at the
same time whether you connect the power to the Speaker Mojo
II or power cradle. It will take about 5 hours for charging them at
the same time. Once both are fully charged, the battery life of the
Speaker Mojo II can be doubled. This can be done by turning on
the power cradle, placing the Speaker Mojo II on the cradle and
turning it on while playing music.
Please note, the Speaker Mojo II LED charging indicator will not
light up when the speaker is charging on the Power Cradle
Important: Select Speaker Mode Prior to turning on Speaker(s)
Charging Modes (Cont.)
4. Charging Other USB Enabled Devices via Power Cradle
The included Power Cradle can
also be used to charge other USB
enabled devices. Simply follow the
steps listed in number 2 to charge
up the Power Cradle. You can now
take the power cradle with you on
the go to charge various other smart
devices via USB. You can do so by
connecting the standard USB end
of a USB cable to the USB port in the back of the Power Cradle.
Then plug the other end into your smart device.
Slide the power switch to “on” to turn it on and begin charging
other smart devices. The blue indicator light will light up to signify
the unit is on.Slide the power switch to “off” to turn off the power
cradle. The blue indicator light will go out and your smart devices
will no longer charge via USB.
Play Modes
Speaker Selection (Mode)
Important: Before you go to turn on the Speaker Mojo II please
stop and read these instructions carefully.
The Speaker Mojo II can be played in a couple of different ways.
Mono mode will allow you to work with just one speaker or stereo
mode which allows you to pair up two speakers.
Important: Select Speaker Mode Prior to turning on Speaker(s)
Play Modes (Cont.)
Playing in Mono Mode: Make sure the
switch on the bottom of the speaker
is switched to “M” before turning on
the speaker
Playing in Stereo Mode: One
speaker must be switched to “L”
on the bottom and the other must
be switched to “R” before turning
them on.
Power on / Power off
Slide the power switch to “on” to
turn on the Speaker Mojo II. The
Bluetooth indicator will light up blue to signify the unit is on and
ready to be paired.
Slide the power switch to “off” to turn off the unit
and the Bluetooth indicator light will go out.
Important: Select Speaker Mode Prior to turning on Speaker(s)
Play Modes (Cont.)
Single Speaker
•• Bluetooth mode: Play an audio
signal from the connected
Bluetooth device. Before turning
the Speaker Mojo II on, turn the
speaker over so that the bottom
of the speaker is facing up. Locate
the stereo switch (L,M,R) on the speaker and make sure that
it is set to the “M” or mono setting.
•• Now turn on the Speaker Mojo II. Once the Speaker Mojo II
has entered Bluetooth mode, the Bluetooth icon will light
up blue and the tone confirming that the unit is currently in
Bluetooth pairing mode will sound.
•• Go to the Bluetooth settings on your smart device to find
the device named “Mojo II”. A tone will sound to confirm the
device has paired successfully. Next time the Speaker Mojo II
and connected device will pair automatically.
Please note: Mojo II will not show up as an available device
unless you have set the stereo switch to “M”. Your device
must be within 40 feet of the speaker while in bluetooth
mode.
•• Direct Connection Mode (Aux In): To play music via direct
connection simply insert the included Aux cable into the Aux
in port on the back of the Speaker. Direct connection mode is
not supported in Stereo Mode.
Important: Select Speaker Mode Prior to turning on Speaker(s)
Play Modes (Cont.)
••
Please Note: If an Aux cable is connected to the speaker it will
not play music from Bluetooth© connected devices.
Stereo Speaker Mode (Two Speakers)
•• Bluetooth mode: The Speaker Mojo II has
the ability to be connected together with
another Speaker Mojo II to enter into stereo
speaker mode. To enter into stereo speaker
mode, begin by selecting either one of the
Speaker Mojo II speakers and slide the stereo
switch on the bottom of the speaker to “L”
which stands for left.
•• Take the other speaker and slide the stereo
switch to “R” which stands for right. Now
turn on the speakers and they will auto pair
to each other within 10 seconds of being
turned on.
•• Go to the Bluetooth settings on your smart
device to find the device named “Mojo II”.
A tone will sound to confirm the device has
paired successfully. Next time the Speaker
Mojo II and connected device will pair
automatically.
Important: Select Speaker Mode Prior to turning on Speaker(s)
Play Modes (Cont.)
••
••
10
Note: If you are in Stereo Mode and the “R-speaker”
disconnects due to being too far apart, the music playing on
the “L-speaker” will pause. In stereo mode the speakers can
be no more than 20 feet apart from each other.Once you are
back in the above range of operation for the two speakers,
they will reconnect by themselves automatically .When paired
successfully again, there will be indication sound signaling a
reconnection, and the two speakers will begin playing music
within 3 seconds.
Direct Connection Mode (Aux In): Direct connection via
Aux In is not supported in Stereo Speaker mode. Please
refer to the “Direct Connection Mode” section on Page 8 for
information on how to connect to a single speaker.
Important: Select Speaker Mode Prior to turning on Speaker(s)
Operation Details
Audio Use
Follow the connection steps to pair a Bluetooth© device with
the Speaker Mojo II. At this point you can send any kind of audio
signal to your speaker (music, video, gaming, etc.). Just use your
device as normal and the audio will play through your Speaker
Mojo II.
Controls
Press the Play/Pause button to play or pause the music when
using a music player through your Bluetooth© connected device.
Pressing the + and - buttons will increase or decrease the volume
on the Speaker Mojo II. Please note that this will not affect the
volume levels on the connected device. When the volume level on
the speaker has reached capacity you will hear a tone. In stereo
mode either speaker can be used to control volume level and
play/pause.
Connection
Laptop / Notebook / PC
As the Bluetooth© versions for these types of devices varies
greatly, the connection methods will differ as well. If you
can not connect with the Speaker Mojo II using the previous
method instructed you may need to install a new version of the
Bluetooth© driver.
Please reference the instructions of device for details.
Important: Select Speaker Mode Prior to turning on Speaker(s)
11
Operation Details (cont.)
Speaker Phone
After pairing your mobile phone to Speaker Mojo II with
Bluetooth, the speaker phone function can be used.
•• Making a call: Call will automatically transfer to the
speakerphone. If not, tap play/pause button;
•• Answering a call: Tap play/pause button to answer the
incoming call;
•• Ending a call : Tap play/pause button during the call to
end the call;
•• Rejecting a call : Hold play/pause button to reject the
incoming call;
•• Redial last number: Double tap play/pause button to redial
the last number when it is not in a call.
If you are using the speaker phone function in Stereo Speaker
Mode, please note that the call will come through the “L”
speaker. The volume and microphone functions will only work on
the “L” speaker.
12
Important: Select Speaker Mode Prior to turning on Speaker(s)
Troubleshooting
Issue: Pairing is unsuccessfully after multiple attempts
Solution:
•• Check if the Bluetooth indicator light is on. If the indicator
light is off, please press the power button to turn the unit
on. If the Bluetooth indicator light still doesn’t come on after
pressing the power button, please charge the unit.
•• Check for other Bluetooth devices around the surroundings
that may interfere with searching and turn devices off.
•• If pairing in single “Mono Mode” make sure the switch on the
bottom of the speaker is sitting on “M”.
•• Power off and then power on the unit to restart the Bluetooth
Unplug any cables plugged into the AUX IN, restart all
devices and then attempt pairing again.
Issue: Pairing in Stereo Mode is unsuccessfully after multiple
attempts
Solution:
•• First check to see that one speaker is switched to “L” on
the bottom, and the other is switched to “R”. Turn off the
speakers then turn them back on.
•• Check to make sure that all cables are unplugged from the
AUX IN port.
•• If you would like to enter into “Stereo Mode” from “Mono
Mode” you will need to turn off both speakers. Then select
one of the speakers to be the “L” speaker and one to be the
Important: Select Speaker Mode Prior to turning on Speaker(s)
13
Troubleshooting (cont.)
••
“R” speaker by sliding the switch on the bottom of each
speaker.
Be sure to make your mode selection (Mono or Stereo) while
the speakers are powered off. Then turn them on.
Issue: Interference or static during playback
Solution:
••
Avoid using the device between concrete or other building
structures that may interfere with the signal.
•• Please check if the battery level of the unit and the
Bluetooth© device and charge if necessary.
For more troubleshooting help go to http://bemwireless.com
Maintenance
Please follow the instructions below for cleaning your
Speaker Mojo II
•• Power off the unit and unplug the power adapter from
wall outlet
•• Use a soft, dry, lint-free cloth and wipe gently
•• Do not use alcohol, benzene, thinners or other chemical
detergents as these can cause the casing to be warped
or discolored
For questions, comments or to purchase more bēm wireless
products go to bemwireless.com
14
Important: Select Speaker Mode Prior to turning on Speaker(s)
Storage
••
••
Power off the Speaker Mojo II If the unit will not be used for
an extended period of time.
Do not set the unit in a damp environment, high temperatures
or in direct sunlight.
More Info
For questions, comments or to purchase more bēm wireless
products go to: bemwireless.com
You can also follow us at:
facebook.com/bemwireless
twitter.com/bemwirelessco
youtube.com/bemwireless
For information on your product’s warranty go to:
bemwireless.com/support
Important: Select Speaker Mode Prior to turning on Speaker(s)
15
FCC Statement
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received,
including interference that may cause undesired
operation.
&KDQJHVRUPRGL´FDWLRQVQRWH[SUHVVO\DSSURYHGE\WKHSDUW\UHVSRQVLEOH
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
16
IMPORTANT: SELECT SPEAKER MODE PRIOR TO TURNING ON SPEAKER(S)
IC Caution.
- English:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including interference
that may cause undesired operation of the device.
This equipment should be installed and operated with a minumum distance of 20 cm
between the radiator and your body.
- French:
Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation estautorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectrique subi, mêmesi le
brouillage est susceptible d'en compromettre le fonctionnement.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le
radiateur et votre corps.
I MPORTANT : S ELECT S PEAKER MODE P R IOR
TO TURN ING ON
S PEAKER ( S )
17
Product Name : Speaker Mojo II
Model Number : HL2750
Power Supply: 5V,1A
Output Power: 1.5W X 2
USB charging output: 5V,1A x 1
Working Range: Approximately 40ft, 12m
Working atmosphere: 0˚C-40˚C / 20%-90%RH
bēm wireless
http://bemwireless.com/
bēm wireless LLC.
1725 Kilkenny Ct.
Woodstock, IL. USA
Made in China
18
I MPORTANT : S ELECT S PEAKER MODE P R IOR
TO TURN ING ON
S PEAKER ( S )
Safety Instructions
This product is specially designed based on the full attention to
safety; in order to make sure the accident-free operation, please
abide the guidelines listed below:
•
Always position the unit on a stable and level
surface. Unstable surface can cause the unit to topple and
fall, resulting in possible damage or injury
•
Do not drop, unpack, open, beat, curve, prink and
burn the unit
•
•
•
•
•
Avoid using the unit nearby basins or sinks where
it may come in contact with water
•
Do not place any ware with full water on the top
of the unit, such as vase, glass, pot, and please avoid placing candle on
the speaker surface as well
Protect the using of the unit from any overheating devices (such as
radiator, heating installation, cooking stove or other heating devices
Regardless of what reasons cause the unit damage, please ask for the
maintenance personnel to repair
If you want to do the cleaning, please turn off the unit and unplug the
Set the volume properly to prevent injury to the unit and your personal
health.
I MPORTANT : S ELECT S PEAKER MODE P R IOR
TO TURN ING ON
S PEAKER ( S )
19
Safety Instructions (cont.)
Correct Disposal of this product. This marking indicates that this product
should not be disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling
WARNING:
•
The battery (battery or batteries or battery pack) shall not be exposed to
•
the apparatus.
•
20 I
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type.
MPORTANT
: S ELECT S PEAKER MODE P R IOR
TO TURN ING ON
S PEAKER ( S )
bēm wireless | 1725 Kilkenny Court | Woodstock IL 60098
TEL: 855-839-8616
© 2015 bēm wireless

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2015:07:14 15:41:10-05:00
Creator                         : Adobe InDesign CC 2014 (Macintosh)
Modify Date                     : 2015:09:28 09:06:36+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2015:09:28 09:06:36+08:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 15667 bytes, use -b option to extract)
Instance ID                     : uuid:5f9de53e-686b-4e0d-b7d8-7aa15a396983
Original Document ID            : xmp.did:F77F11740720681192B0B9B62EB54FE8
Document ID                     : xmp.id:2cc0765d-61a4-41a0-9ca7-49aa06b7a9f5
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:7640f9be-1b35-7141-8000-a53e9daa07e6
Derived From Document ID        : xmp.did:971513c0-22fe-470e-a528-f27b4d856a3e
Derived From Original Document ID: xmp.did:F77F11740720681192B0B9B62EB54FE8
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Macintosh)
History Changed                 : /
History When                    : 2015:07:14 15:41:10-05:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 103.716667
Max Page Size H                 : 103.716667
Max Page Size Unit              : Millimeters
Font Name                       : GothamBold, GothamBook, GothamExtraLight, GothamBold-SC700
Font Family                     : Gotham Bold, Gotham Book, Gotham ExtraLight, GothamBold SC700
Font Face                       : Regular, Regular, Regular, SC700
Font Type                       : TrueType, TrueType, TrueType, Unknown
Font Version                    : Version 001.000, Version 001.000, Version 001.000, Version 5.016;PS 5.006;hotconv 1.0.67;makeotf.lib2.5.33168
Font Composite                  : False, False, False, False
Font File Name                  : Gotham-Bold.ttf, Gotham-Book.ttf, Gotham-XLight.ttf, AdobeHeitiStd-Regular.otf
Plate Names                     : Cyan, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Page Count                      : 21

EXIF Metadata provided by EXIF.tools