E F Johnson 2425110 242-5110 User Manual CERTIFICATE OF COMPLIANCE
E. F. Johnson Company 242-5110 CERTIFICATE OF COMPLIANCE
Contents
Manual
Rhein Tech Laboratories 360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com E. F. Johnson Co. Model: 242-5110 / 242-5111 FCC Part 90 & IC RSS-119 Permissive Change RTL WO# 2002213 APPENDIX C: USER MANUAL Please refer to the following pages, specifically pages 8 and 9, that include the new, optional antenna. 10 of 17 SERVICE MANUAL DIGITAL/ANALOG PORTABLE RADIO 5100 SERIES PORTABLE RADIO VHF PROJECT 25 CONVENTIONAL SMARTNET /SMARTZONE ® ® 7.2 VDC, 1 and 5 Watts (VHF); Part No. 242-51xx-xxx Part Number: 001-5100-0012CD November 2002 Supersedes: 001-5100-0011CD; 6/02 51xx SERIES PORTABLE VHF PROJECT 25 (DIGITAL) AND ANALOG SMARTNET®/SmartZone® 7.5 VDC 5 & 1 W (VHF) Part No. 242-51xx-xx0 Copyright© 2002 by the E.F. Johnson Company The E.F. Johnson Company, which was founded in 1923, provides wireless communication systems solutions for public safety, government, and commercial customers. The company designs, manufactures, and markets conventional and trunked radio systems, mobile and portable subscriber radios, repeaters, and Project 25 digital radio products. E.F. Johnson is a wholly owned subsidiary of EFJ, Inc., formerly Transcrypt International, Inc. Viking Head/EFJohnson logo, Call Guard®, PCConfigure™, and PCTune™ are trademarks of the E.F. Johnson Company. SMARTNET®, SmartZone®, SecureNet™, Call Alert™, and Enhanced Private Conversation™ are trademarks of Motorola, Inc. All other company and/or product names used in this manual are trademarks and/or registered trademarks of their respective manufacturer. The IMBE™ voice coding technology embodied in this product is protected by intellectual property rights including patent rights of Digital Voice Systems, Inc. Information in this manual is subject to change without notice. TABLE OF CONTENTS TABLE OF CONTENTS GENERAL INFORMATION 1.1 1.2 SCOPE OF MANUAL . . . . . . . . . . . . . . . . . . . 1-1 TRANSCEIVER DESCRIPTION . . . . . . . . . . 1-1 General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Analog/Digital Operation . . . . . . . . . . . . . . . . . . 1-1 Operating Protocols . . . . . . . . . . . . . . . . . . . . . . . 1-1 Full and Limited Keypad Models . . . . . . . . . . . . 1-1 Systems, Channels, and Zones. . . . . . . . . . . . . . . 1-2 Secure Communication . . . . . . . . . . . . . . . . . . . . 1-2 Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 1.3 PRODUCT WARRANTY . . . . . . . . . . . . . . . . . 1-3 1.4 PART NUMBER BREAKDOWN . . . . . . . . . . 1-3 1.5 TRANSCEIVER IDENTIFICATION . . . . . . . . 1-3 1.6 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . 1-3 1.7 FACTORY CUSTOMER SERVICE . . . . . . . . 1-4 1.8 FACTORY RETURNS . . . . . . . . . . . . . . . . . . . 1-5 1.9 REPLACEMENT PARTS . . . . . . . . . . . . . . . . 1-5 1.10 INTERNET HOME PAGE . . . . . . . . . . . . . . . . 1-5 2.1 2.2 2.3 2.4 CIRCUIT DESCRIPTION 5.1 GENERAL OVERVIEW . . . . . . . . . . . . . . . . . . 5-1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Analog Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Project 25 Digital Mode . . . . . . . . . . . . . . . . . . . 5-2 RF Board OVERVIEW . . . . . . . . . . . . . . . . . . . 5-2 VHF/UHF RF BOARD . . . . . . . . . . . . . . . . . . . 5-3 Frequency Generation Unit (FGU) . . . . . . . . . . 5-3 Antenna Switch . . . . . . . . . . . . . . . . . . . . . . . . . 5-4 Receiver Front End . . . . . . . . . . . . . . . . . . . . . . 5-5 Receiver Back End. . . . . . . . . . . . . . . . . . . . . . . 5-5 Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 800 MHz RF BOARD . . . . . . . . . . . . . . . . . . . . 5-6 Frequency Synthesis . . . . . . . . . . . . . . . . . . . . . 5-6 Antenna Switch . . . . . . . . . . . . . . . . . . . . . . . . . 5-8 Receiver Front End . . . . . . . . . . . . . . . . . . . . . . 5-8 Receiver Back End. . . . . . . . . . . . . . . . . . . . . . . 5-9 Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9 USER INTERFACE (UI) BOARD . . . . . . . . . 5-10 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10 Microcontroller (U2) . . . . . . . . . . . . . . . . . . . . 5-10 Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10 Graphical Display . . . . . . . . . . . . . . . . . . . . . . 5-10 LOGIC BOARD . . . . . . . . . . . . . . . . . . . . . . . . 5-10 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10 Digital Signal Processing Overview . . . . . . . . 5-10 Receive Signal Path . . . . . . . . . . . . . . . . . . . . . 5-11 Transmit Signal Path . . . . . . . . . . . . . . . . . . . . 5-12 ADSIC (U2) . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12 AUDIO CIRCUIT . . . . . . . . . . . . . . . . . . . . . . . 5-12 Receive Audio Circuit . . . . . . . . . . . . . . . . . . . 5-12 Transmit Audio Circuit . . . . . . . . . . . . . . . . . . 5-13 5.2 5.3 5.4 BATTERY, ACCESSORY, AND DISASSEMBLY INFORMATION BATTERY INFORMATION . . . . . . . . . . . . . . . Battery Removal/Installation . . . . . . . . . . . . . . . . Battery Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BELT CLIP INSTALLATION . . . . . . . . . . . . . ACCESSORY INSTALLATION . . . . . . . . . . . TRANSCEIVER DISASSEMBLY . . . . . . . . . . Separating Front Cover and Chassis . . . . . . . . . . Removing RF and Logic Boards From Chassis . Removing UI (User Interface) Board . . . . . . . . . Removing Switch assembly. . . . . . . . . . . . . . . . . 5.5 2-1 2-1 2-1 2-2 2-2 2-3 2-3 2-4 2-5 2-6 OPERATION 3.1 GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 5.6 ALIGNMENT PROCEDURE 6.1 GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 Tune Software . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 MAIN SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 MENU BAR DESCRIPTION . . . . . . . . . . . . . . 6-3 File Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 Serial Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 Radio Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 Help Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4 TUNING PROCEDURE . . . . . . . . . . . . . . . . . . 6-4 Connecting Test Setup . . . . . . . . . . . . . . . . . . . . 6-4 Starting and Configuring PCTune . . . . . . . . . . . 6-4 6.2 6.3 TRANSCEIVER PROGRAMMING 4.1 4.2 4.3 4.4 PROGRAMMING SETUP . . . . . . . . . . . . . . . . COMPUTER DESCRIPTION . . . . . . . . . . . . . USING THE PCCONFIGURE SOFTWARE . CLONING PROCEDURE . . . . . . . . . . . . . . . . 4-1 4-1 4-1 4-2 6.4 ii Revised November 2002 TABLE OF CONTENTS TABLE OF CONTENTS (CONT’D) Chassis, Hardware, Misc . . . . . . . . . . . . . . . . . . . RF Board (A215) . . . . . . . . . . . . . . . . . . . . . . . . . Logic Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . User Interface Board (A400) . . . . . . . . . . . . . . . . Exploded Views. . . . . . . . . . . . . . . . . . . . . . . . . . LIST OF FIGURES PARTS LIST 7-1 7-1 7-2 7-4 7-9 4-1 5-1 6-1 6-2 6-3 SCHEMATIC DIAGRAMS AND COMPONENT LAYOUTS Programming Setup . . . . . . . . . . . . . . . . . . . . . . RF Board Block Diagram . . . . . . . . . . . . . . . . . Alignment Setup . . . . . . . . . . . . . . . . . . . . . . . . PCTune Main Screen . . . . . . . . . . . . . . . . . . . . . Test Box Front Panel . . . . . . . . . . . . . . . . . . . . . 4-1 5-3 6-1 6-2 6-4 LIST OF TABLES Interconnect Schematic . . . . . . . . . . . . . . . . . . . 8-1 VHF RF Board Schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Board Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5 UHF RF Board Schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6 Board Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9 800 MHz RF Board Schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10 Board Layout. . . . . . . . . . . . . . . . . . . . . . . . . . 8-13 Logic Board Schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14 Board Layout. . . . . . . . . . . . . . . . . . . . . . . . . . 8-16 UI (User Interface) Board Schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-17 Board Layout. . . . . . . . . . . . . . . . . . . . . . . . . . 8-19 Programming Cable Schematic . . . . . . . . . . . 8-21 1-1 5-1 iii Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 LO and First IF Frequencies . . . . . . . . . . . . . . . . 5-2 Revised November 2002 GENERAL INFORMATION SECTION 1 GENERAL INFORMATION 1.1 SCOPE OF MANUAL used in systems where the channel spacing is 25 kHz or 30 kHz. This service manual contains operation, programming, alignment, and service information for the EFJohnson 5100-Series portable digital transceivers. Project 25 Digital - Operates on Project 25 compatible systems. The voice is digitized, error corrected, optionally encrypted, and then transmitted using C4FM modulation according to the Project 25 standard. This mode uses a channel spacing of 12.5 kHz. 1.2 TRANSCEIVER DESCRIPTION 1.2.3 OPERATING PROTOCOLS 1.2.1 GENERAL The 5100-series portable digital transceivers have multiple system programming capability to allow operation in various types of radio systems as described in the information which follows. Standard 5100-series transceivers can be programmed for any or all the following operating protocols. The conventional analog protocol is standard and the others are optional and therefore are available only if enabled by factory programming. Refer to Section 3 for more operation information. Models are available for operation in the following frequency ranges. Repeater talk-around, which allows transmitting on the receive frequency, is also available with all bands. • • • • VHF: 136-174 MHz Conventional analog Conventional Project 25 (digital) SMARTNET™/SmartZone® analog or digital Trunked Project 25 (digital) NOTE: Some of the above protocols are not available with early units. Multi-Net® versions of this radio are planned for future release. These versions will be programmable for Multi-Net and conventional analog operation. However, future migration to any of the other protocols listed above will be possible by reflashing the operating software. This manual does not include Multi-Net operation information. Power output is user switchable for low and high levels as follows: VHF - 1 and 5 watts 1.2.2 ANALOG/DIGITAL OPERATION The 5100-series transceiver uses a digital signal processor (DSP) to provide IF and audio filtering and modulation functions. This allows operation on the various types of channels (see following), backward compatibility with existing equipment, and the ability to operate on various types of radio systems. 1.2.4 FULL AND LIMITED KEYPAD MODELS Narrow Band Analog - FM modulation is used with a maximum deviation of 2.5 kHz. This mode is usually used in systems with a channel spacing of 12.5 or 15 kHz. Both models have programmable F1-F4 option keys and the Up/Down switch on the front panel. In addition, both models have a push-button and a rotary switch on the top panel and three push-buttons on the side panel that are programmable. A menu mode can also be programmed with both models to select functions that are selectable by the option buttons. Refer to Both DTMF (18-key) and limited (6-key) models are available. The DTMF keypad version includes the 0-9, *, and # keys for making telephone calls, entering unit or group ID numbers, and keypad programming. Wideband Analog - FM modulation is used with a maximum deviation of 5 kHz. This mode is usually 1-1 Revised July 2002 GENERAL INFORMATION SMARTNET system than a conventional system, the total number of channels decreases as the number of SMARTNET systems increases. The programming software displays a bar graph which shows the amount of available memory space that is used by the current data. Refer to Section 4 for more information. Section 3 for more information on transceiver operation. 1.2.5 SYSTEMS, CHANNELS, AND ZONES A zone and channel are selected to place and receive calls. The following describes the relationship between systems, channels, and zones. Zones Systems A zone is a collection of up to 16 channels of any type. For example, a zone could include 12 conventional channels and 4 SMARTNET channels. One use of zones may be to program the channels used for operation in a different geographical areas. Up to 16 zones can be programmed with standard models and up to 32 can be programmed if the 512-channel option is enabled. A system is a collection of channels or talk groups belonging to the same repeater site. It defines all the parameters and protocol information required to access a site. Up to 16 systems of any type can be programmed. The maximum number of channels assignable to a system is limited to approximately 256 with standard models or approximately 500 with the 512-channel option (or the available memory space as described in the following information). 1.2.6 SECURE COMMUNICATION SecureNet™ voice encryption is used to provide secure communication with this transceiver. SecureNet is a proprietary Motorola protocol that digitizes the voice and then encrypts it using a DES algorithm. The following types of SecureNet encryption are available: Channels A channel selects a radio (RF) channel or talk group as follows: Conventional Analog Mode - A channel selects a specific radio channel, Call Guard (CTCSS/DCS) squelch coding, and other parameters unique to that channel. Analog Conventional and SMARTNET/SmartZone Channels Conventional Project 25 Mode - A channel selects a specific radio channel, NAC squelch coding, talk group ID, and other parameters unique to that channel. Digital SMARTNET/SmartZone and Project 25 Channels • • Trunked Project 25 Mode - A channel selects a specific talk group ID and other parameters unique to that talk group. DES (DES-XL is not available) DES-OFB (Output Feedback) 1.2.7 PROGRAMMING Transceiver programming is performed using a PC-compatible computer, the EFJohnson 5100 Programming Cable, and PCConfigure programming software (see Table 1-1). Programming is described in Section 4. SMARTNET/SmartZone and Project 25 Trunked Operation - A channel selects a specific talk group, announcement group, emergency group, and other parameters unique to that talk group. As described in the preceding “Systems” description, a maximum of up to 256 or approximately 500 channels can be programmed. Although it is theoretically possible to program any combination of systems that produces up to 500 total channels, the maximum number is also limited by the available memory. For example, since more memory is required to program a 1.2.8 ALIGNMENT Transceiver alignment is performed using EFJohnson PCTune software and 5100 test box, and the same computer used for programming (see preceding section). All adjustments are made electron- 1-2 Revised November 2002 GENERAL INFORMATION ically using the software (no manual adjustments are required). Refer to Section 6 for alignment information. C (Reserved for future use) D Primary Operating Protocol A - Analog Conventional B - P25 Conventional C - P25 Trunking D - SMARTNET Analog E - SMARTNET Digital F - SmartZone Analog G - SmartZone Digital H - STAR Trunking Analog J - STAR Trunking Digital K - Multi-Net Analog 1.3 PRODUCT WARRANTY The warranty statement for this transceiver is available from your product supplier or from the Warranty Department, E.F. Johnson Company, 299 Johnson Avenue, P.O. Box 1249, Waseca, MN 560930514. This information may also be requested from the Warranty Department by phone as described in Section 1.7. The Warranty Department may also be contacted for Warranty Service Reports, claim forms, or any other questions concerning warranties or warranty service. NOTE: The above “D” character indicates only the primary protocol. Other protocols (and options) may also be included and are indicated by the next “E” letter. 1.4 PART NUMBER BREAKDOWN The following is a breakdown of the part number used to identify this transceiver. Some combinations are not available. E Options This letter indicates other operating protocols and options that are enabled by factory programming. Options may include encryption, OTAR, 512 Talk Groups, Digital SMARTNET/SmartZone, and others. Some combinations are currently be undefined, so use the Transfer > Read Options From Radio menu function of PCConfigure to determine which protocols and options are enabled in your radio (see Section 4). 242-51FK-ABC-Dx F (Frequency Band) 1 - VHF (136-174 MHz) 3 - UHF (403-470 MHz) 4 - UHF (450-512 MHz) 8 - 800 MHz 9 - 900 MHz 1.5 TRANSCEIVER IDENTIFICATION K (Keypad)* 2 - Standard, Limited keypad 3 - Standard, DTMF keypad 6 - Intrin Safe, Limited keypad 7 - Intrin Safe, DTMF keypad The transceiver identification number is printed on a label that is attached to the chassis. The following information is contained in the identification number: Model From P.N. A (Antenna) 0 - No antenna 1 - VHF 136-151 MHz 2 - VHF 151-162 MHz 3 - VHF 162-174 MHz 4 - UHF 403-520 MHz 8 - 800 MHz 51xx Revision Manufacture Warranty Plant Number Letter Date Week No. of Year 12 2 12345 A = Waseca Last Digit of Year 1.6 ACCESSORIES B (Battery) 0 - No battery 1 - Ultra high capacity, NiMH 6 - Intrin Safe, ultra high cap NiMH The accessories available for this transceiver are listed in Table 1-1. 1-3 Revised November 2002 GENERAL INFORMATION Table 1-1 Accessories Accessory Batteries 2200 mAH NiCd 3600 mAH NiMH standard Battery Chargers Table 1-1 Part No. Accessory 585-5100-210 585-5100-215 585-5100-230 585-5100-240 Charger kit, -210 chgr, -230 PS, US cord Charger kit, -215 chgr, -230 PS, US cord Charger kit, -210 chgr, -230 PS, Eur cord Charger kit, -215 chgr, -230 PS, Eur cord Antennas 136-151 MHz helical (yellow core) 151-166 MHz helical (black core) 166-174 MHz helical (blue core) 136-174 MHz wideband Carrying Accessories Belt clip, 2-1/2” std spring loaded Speaker/Microphones and Earphones Spkr/mic, coil cord w/2.5mm earphone jk Replacement coil cord for above spkr/mic Earphone kit, coil cord w/2.5mm rt angle plug, for -057 spkr/mic Earphone kit, coil cord w/2.5mm straight plug, for -057 spkr/mic Earphone adapter, w/3.5 mm thrd jack Lightwght headset w/inline PTT for -051 1-wire earphone kit, for -051 adapter 2-wire palm mic kit, for -051 adapter Programming Accessories 5100 Programming Kit (-488 software, -920 cable, CD manual) 5100 Programming Cable 5100 Cloning Cable PCConfigure programming software, CD Adapter, DB9M-DB25F 250-5100-210 250-5100-215 250-5100-220 250-5100-225 Part No. Test Cables and Accessories PCTune radio tuning software 587-5100-220 587-5100-360 Single-unit rapid chgr, w/o power supply Single-unit rapid chgr/cond w/o pwr sup Pwr supply, switching 120/230 VAC 1.3A Docking station, 4-unit for -210 ( -250 power supply included) Wall mount kit for docking station Power supply, switching 120/230 VAC 4.5A for docking station Accessories (Continued) 023-9998-499 023-5100-900 Radio test and Ethernet box 023-5100-910 Cable, -900 test box to radio 597-5900-002 DB9 M-F cable, 6 ft. (-900 to cmptr) DB25M-DB9F cable, 6 ft (-900 to cmptr) 597-0005-057 515-3102-050 SMA F to BNC F adapter 515-3102-060 SMA M to BNC F adapter 585-5100-245 585-5100-250 DES Encryption Keyloader DES Key Variable Loader (KVL) Key loader to radio cable Key loader charger (NLN8858) Key loader spare battery (NLN9998) 585-5000-930 585-5000-932 585-5000-934 585-5000-936 501-0017-101 501-0017-103 501-0017-105 501-0017-108 1.7 FACTORY CUSTOMER SERVICE 585-5100-128 The Customer Service Department of the E.F. Johnson Company provides customer assistance on technical problems and the availability of local and factory repair facilities. Regular Customer Service hours are 7:30 a.m. - 5:30 p.m. Central Time, MondayFriday. A technical support subscription service is available or support can be purchased on an as-needed basis. The Customer Service Department can be reached using the following telephone numbers: 589-0015-057 597-2002-101 589-5100-057 589-5100-059 589-5100-051 589-0015-059 589-5100-053 589-5100-055 Toll-Free: (800) 328-3911 FAX: (507) 835-6969 E-Mail: customerservice@efjohnson.com You can also e-mail a person directly if you know their first initial/last name (example: jsmith@efjohnson.com). 250-5100-003 023-5100-920 023-5100-930 023-9998-488 515-9000-015 NOTE: Emergency 24-hour technical support is also available at the 800 and preceding numbers during off hours, holidays, and weekends. 1-4 Revised November 2002 GENERAL INFORMATION to call the repair lab about your unit. These numbers are referenced on the repair order and make it easier and faster to locate your unit in the lab. When your call is answered at the E.F. Johnson Company, you will hear a brief message informing you of numbers that can be entered to reach various departments. This number may be entered during or after the message using a tone-type telephone. If you have a pulse-type telephone, wait until the message is finished and an operator will come on the line to assist you. When you enter some numbers, another number is requested to further categorize the type of information you need. Return Authorization (RA) numbers are not necessary unless you have been given one by the Field Service Department. RA numbers are required for exchange units or if the Field Service Department wants to be aware of a specific problem. If you have been given an RA number, reference this number on the Factory Repair Request Form sent with the unit. The repair lab will then contact the Field Service Department when the unit arrives. You may also contact the Customer Service Department by mail. Please include all information that may be helpful in solving your problem. The mailing address is as follows: For additional information on factory service, the Depot Service Department can be contacted at the following E-mail address: E.F. Johnson Company Customer Service Department 299 Johnson Avenue P.O. Box 1249 Waseca, MN 56093-0514 depotrepair@efjohnson.com 1.9 REPLACEMENT PARTS 1.8 FACTORY RETURNS Replacement parts can be ordered directly from the Service Parts Department. To order parts by phone, dial the toll-free number as described in Section 1.7. When ordering, please supply the part number and quantity of each part ordered. E.F. Johnson dealers also need to give their account number. If there is uncertainty about the part number, include the designator (C512, for example) and the model number of the equipment the part is from. Repair service is normally available through local authorized E.F. Johnson Land Mobile Radio Service Centers. If local service is not available, the equipment can be returned to the factory for repair. However, it is recommended that you contact the Customer Service Department before returning equipment. A service representative may be able to suggest a solution to the problem making return of the equipment unnecessary. You may also send your order by mail or FAX. The mailing address is as follows and the FAX number is shown in Section 1.7. Be sure to fill out a Factory Repair Request Form #271 for each unit to be repaired, whether it is in or out of warranty. These forms are available free of charge by calling Customer Service (see Section 1.7) or by requesting them when you send a unit in for repair. Clearly describe the difficulty experienced in the space provided and also note any prior physical damage to the equipment. Include this form in the shipping container with each unit. Your telephone number and contact name are important as there are times when the technicians may have specific questions that need to be answered in order to completely identify and repair a problem. E.F. Johnson Company Service Parts Department 299 Johnson Avenue P.O. Box 1249 Waseca, MN 56093-0514 1.10 INTERNET HOME PAGE The E.F. Johnson Company has a site on the World Wide Web that can be accessed for information on the company about such things as products, systems, and regulations. The address is http://www.efjohnson.com. When returning equipment for repair, it is also recommended that you use a PO number or some other reference number on your paperwork in case you need 1-5 Revised November 2002 GENERAL INFORMATION 5100 SERIES PORTABLE SPECIFICATIONS The following are general specifications intended for use in testing and servicing this transceiver. For current advertised specifications, refer to the specification sheet available from your sales representative. Values are typical and are subject to change without notice. GENERAL Frequency Range Available Operating Modes Talk Groups Transmit/Receive Separation Channel Spacing Maximum Deviation Frequency Stability Dimensions (w/o antenna) Weight (w/std battery) Supply Voltage Battery Life Current Drain (maximum w/backlight, w/o backlight subtract 100 mA) VHF: 136-174 MHz Conventional analog, Project 25 conv. and trunked, SMARTNET/SmartZone analog and digital, Multi-Net (Multi-Net available with future release) 256 standard, up to 500 optional (dependent on available memory) Any frequency within the range VHF: 12.5, 25, and 30 kHz 25 kHz analog - 5 kHz 12.5 kHz analog - 2.5 kHz 12.5 kHz analog NPSPAC - 4.0 kHz VHF - 2.0 PPM (–22 to +140° F or –30 to +60° C) 6.7” H x 2.52” W x 1.9” D (17.0 cm x 6.4 cm x 4.8 cm) 24 oz. (675 g) 7.2 volts DC nominal 13 hours typical w/std 3600 mAH battery Standby - 350 mA Receive (rated audio out) - 500 mA Low Tx Power - 1.0 A High Tx Power - 2.0 A RECEIVER Sensitivity Selectivity Spurious and Image Rejection Intermodulation Maximum Frequency Spread Audio Power Output Audio Distortion 0.25 µV (analog mode 12 dB SINAD), 0.25 µV (digital mode 5% BER) –75 dB –75 dB –78 dB (VHF) Any spread within the range 500 mW Less than 2% at 1 kHz TRANSMITTER RF Power Output Spurious and Harmonic Emissions FM Hum and Noise Audio Modulation Audio Distortion Maximum Frequency Spread VHF: 5W (high), 1W (low) –70 dB (VHF) –45 dB at 25 kHz bandwidth 16K0F3E, 8K10F1E, 11K0F3E VHF Less than 2% at 1 kHz Any spread within the band 1-6 Revised November 2002
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 2003:01:01 11:29:15-07:00 Create Date : 2003:01:01 11:27:42-07:00 Title : CERTIFICATE OF COMPLIANCE Author : Systems Administrator Creator : Microsoft Word 10.0 Producer : Acrobat Distiller 4.05 for Windows Page Count : 11EXIF Metadata provided by EXIF.tools