E F Johnson 2425110 242-5110 User Manual CERTIFICATE OF COMPLIANCE

E. F. Johnson Company 242-5110 CERTIFICATE OF COMPLIANCE

UserManual.wiki >

2425110 User Manual >

Contents

1. Operating Manual
2. 011402 revised 1 Pages 1 to 57 operators manual
3. 011402 revised 1 Pages 57 to 85 operators manual
4. 011402 revised 1 Pages 86 to 113 operators manual
5. Manual

Manual

Rhein Tech Laboratories E. F. Johnson Co. 360 Herndon Parkway Suite 1400 Model: 242-5110 / 242-5111 FCC Part 90 & IC RSS-119 Herndon, VA 20170 Permissive Change http://www.rheintech.com RTL WO# 2002213 10 of 17 APPENDIX C: USER MANUAL Please refer to the following pages, specifically pages 8 and 9, that include the new, optional antenna.

DIGITAL/ANALOG PORTABLE RADIOSERVICEMANUALPart Number: 001-5100-0012CDNovember 2002Supersedes: 001-5100-0011CD; 6/02 5100 SERIESPORTABLE RADIOVHFPROJECT 25 CONVENTIONALSMARTNET®/SMARTZONE®7.2 VDC, 1 and 5 Watts (VHF);Part No. 242-51xx-xxx

TABLE OF CONTENTSii Revised November 2002TABLE OF CONTENTS1 GENERAL INFORMATION1.1 SCOPE OF MANUAL . . . . . . . . . . . . . . . . . . . 1-11.2 TRANSCEIVER DESCRIPTION . . . . . . . . . . 1-1General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1Analog/Digital Operation . . . . . . . . . . . . . . . . . . 1-1Operating Protocols . . . . . . . . . . . . . . . . . . . . . . . 1-1Full and Limited Keypad Models . . . . . . . . . . . . 1-1Systems, Channels, and Zones. . . . . . . . . . . . . . . 1-2Secure Communication . . . . . . . . . . . . . . . . . . . . 1-2Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-21.3 PRODUCT WARRANTY . . . . . . . . . . . . . . . . . 1-31.4 PART NUMBER BREAKDOWN . . . . . . . . . . 1-31.5 TRANSCEIVER IDENTIFICATION . . . . . . . . 1-31.6 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . 1-31.7 FACTORY CUSTOMER SERVICE . . . . . . . . 1-41.8 FACTORY RETURNS . . . . . . . . . . . . . . . . . . . 1-51.9 REPLACEMENT PARTS . . . . . . . . . . . . . . . . 1-51.10 INTERNET HOME PAGE . . . . . . . . . . . . . . . . 1-52 BATTERY, ACCESSORY, AND DISASSEMBLY INFORMATION2.1 BATTERY INFORMATION . . . . . . . . . . . . . . . 2-1Battery Removal/Installation. . . . . . . . . . . . . . . . 2-1Battery Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12.2 BELT CLIP INSTALLATION . . . . . . . . . . . . . 2-22.3 ACCESSORY INSTALLATION . . . . . . . . . . . 2-22.4 TRANSCEIVER DISASSEMBLY. . . . . . . . . . 2-3Separating Front Cover and Chassis . . . . . . . . . . 2-3Removing RF and Logic Boards From Chassis . 2-4Removing UI (User Interface) Board . . . . . . . . . 2-5Removing Switch assembly. . . . . . . . . . . . . . . . . 2-63 OPERATION3.1 GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14 TRANSCEIVER PROGRAMMING4.1 PROGRAMMING SETUP . . . . . . . . . . . . . . . . 4-14.2 COMPUTER DESCRIPTION . . . . . . . . . . . . . 4-14.3 USING THE PCCONFIGURE SOFTWARE. 4-14.4 CLONING PROCEDURE . . . . . . . . . . . . . . . . 4-25 CIRCUIT DESCRIPTION5.1 GENERAL OVERVIEW . . . . . . . . . . . . . . . . . . 5-1Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1Analog Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1Project 25 Digital Mode. . . . . . . . . . . . . . . . . . . 5-2RF Board OVERVIEW . . . . . . . . . . . . . . . . . . . 5-25.2 VHF/UHF RF BOARD . . . . . . . . . . . . . . . . . . . 5-3Frequency Generation Unit (FGU) . . . . . . . . . . 5-3Antenna Switch . . . . . . . . . . . . . . . . . . . . . . . . . 5-4Receiver Front End . . . . . . . . . . . . . . . . . . . . . . 5-5Receiver Back End. . . . . . . . . . . . . . . . . . . . . . . 5-5Transmitter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-65.3 800 MHz RF BOARD . . . . . . . . . . . . . . . . . . . . 5-6Frequency Synthesis . . . . . . . . . . . . . . . . . . . . . 5-6Antenna Switch . . . . . . . . . . . . . . . . . . . . . . . . . 5-8Receiver Front End . . . . . . . . . . . . . . . . . . . . . . 5-8Receiver Back End. . . . . . . . . . . . . . . . . . . . . . . 5-9Transmitter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-95.4 USER INTERFACE (UI) BOARD . . . . . . . . . 5-10Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10Microcontroller (U2) . . . . . . . . . . . . . . . . . . . . 5-10Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10Graphical Display . . . . . . . . . . . . . . . . . . . . . . 5-105.5 LOGIC BOARD . . . . . . . . . . . . . . . . . . . . . . . . 5-10Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10Digital Signal Processing Overview . . . . . . . . 5-10Receive Signal Path . . . . . . . . . . . . . . . . . . . . . 5-11Transmit Signal Path . . . . . . . . . . . . . . . . . . . . 5-12ADSIC (U2) . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-125.6 AUDIO CIRCUIT . . . . . . . . . . . . . . . . . . . . . . . 5-12Receive Audio Circuit . . . . . . . . . . . . . . . . . . . 5-12Transmit Audio Circuit . . . . . . . . . . . . . . . . . . 5-136 ALIGNMENT PROCEDURE6.1 GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1Tune Software . . . . . . . . . . . . . . . . . . . . . . . . . . 6-16.2 MAIN SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . 6-2General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-26.3 MENU BAR DESCRIPTION . . . . . . . . . . . . . . 6-3File Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3Serial Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3Radio Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3Help Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-46.4 TUNING PROCEDURE . . . . . . . . . . . . . . . . . . 6-4Connecting Test Setup . . . . . . . . . . . . . . . . . . . . 6-4Starting and Configuring PCTune . . . . . . . . . . . 6-4

TABLE OF CONTENTS (CONT’D)iii Revised November 2002TABLE OF CONTENTS7 PARTS LISTChassis, Hardware, Misc . . . . . . . . . . . . . . . . . . . 7-1RF Board (A215) . . . . . . . . . . . . . . . . . . . . . . . . . 7-1Logic Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2User Interface Board (A400) . . . . . . . . . . . . . . . . 7-4Exploded Views. . . . . . . . . . . . . . . . . . . . . . . . . . 7-98 SCHEMATIC DIAGRAMS AND COMPONENT LAYOUTSInterconnect Schematic. . . . . . . . . . . . . . . . . . . 8-1VHF RF BoardSchematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2Board Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . 8-5UHF RF BoardSchematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6Board Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9800 MHz RF BoardSchematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10Board Layout. . . . . . . . . . . . . . . . . . . . . . . . . . 8-13Logic BoardSchematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14Board Layout. . . . . . . . . . . . . . . . . . . . . . . . . . 8-16UI (User Interface) BoardSchematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-17Board Layout. . . . . . . . . . . . . . . . . . . . . . . . . . 8-19Programming Cable Schematic . . . . . . . . . . . 8-21LIST OF FIGURES4-1 Programming Setup . . . . . . . . . . . . . . . . . . . . . . 4-15-1 RF Board Block Diagram . . . . . . . . . . . . . . . . . 5-36-1 Alignment Setup . . . . . . . . . . . . . . . . . . . . . . . . 6-16-2 PCTune Main Screen . . . . . . . . . . . . . . . . . . . . . 6-26-3 Test Box Front Panel . . . . . . . . . . . . . . . . . . . . . 6-4LIST OF TABLES1-1 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-45-1 LO and First IF Frequencies . . . . . . . . . . . . . . . . 5-2

1-1 Revised July 2002GENERAL INFORMATIONSECTION 1 GENERAL INFORMATION1.1 SCOPE OF MANUALThis service manual contains operation, program-ming, alignment, and service information for the EFJohnson 5100-Series portable digital transceivers.1.2 TRANSCEIVER DESCRIPTION1.2.1 GENERALThe 5100-series portable digital transceivers have multiple system programming capability to allow operation in various types of radio systems as described in the information which follows. Models are available for operation in the following frequency ranges. Repeater talk-around, which allows transmitting on the receive frequency, is also available with all bands. VHF: 136-174 MHzPower output is user switchable for low and high levels as follows: VHF - 1 and 5 watts1.2.2 ANALOG/DIGITAL OPERATIONThe 5100-series transceiver uses a digital signal processor (DSP) to provide IF and audio filtering and modulation functions. This allows operation on the various types of channels (see following), backward compatibility with existing equipment, and the ability to operate on various types of radio systems.Narrow Band Analog - FM modulation is used with a maximum deviation of 2.5 kHz. This mode is usually used in systems with a channel spacing of 12.5 or 15 kHz.Wideband Analog - FM modulation is used with a maximum deviation of 5 kHz. This mode is usually used in systems where the channel spacing is 25 kHz or 30 kHz. Project 25 Digital - Operates on Project 25 compatible systems. The voice is digitized, error corrected, optionally encrypted, and then transmitted using C4FM modulation according to the Project 25 stan-dard. This mode uses a channel spacing of 12.5 kHz.1.2.3 OPERATING PROTOCOLSStandard 5100-series transceivers can be programmed for any or all the following operating protocols. The conventional analog protocol is stan-dard and the others are optional and therefore are available only if enabled by factory programming. Refer to Section 3 for more operation information.•Conventional analog•Conventional Project 25 (digital)•SMARTNET™/SmartZone® analog or digital•Trunked Project 25 (digital)NOTE: Some of the above protocols are not available with early units. Multi-Net® versions of this radio are planned for future release. These versions will be programmable for Multi-Net and conventional analog operation. However, future migration to any of the other proto-cols listed above will be possible by reflashing the operating software. This manual does not include Multi-Net operation information.1.2.4 FULL AND LIMITED KEYPAD MODELSBoth DTMF (18-key) and limited (6-key) models are available. The DTMF keypad version includes the 0-9, *, and # keys for making telephone calls, entering unit or group ID numbers, and keypad programming.Both models have programmable F1-F4 option keys and the Up/Down switch on the front panel. In addition, both models have a push-button and a rotary switch on the top panel and three push-buttons on the side panel that are programmable. A menu mode can also be programmed with both models to select func-tions that are selectable by the option buttons. Refer to

GENERAL INFORMATION1-2 Revised November 2002Section 3 for more information on transceiver operation.1.2.5 SYSTEMS, CHANNELS, AND ZONESA zone and channel are selected to place and receive calls. The following describes the relationship between systems, channels, and zones.SystemsA system is a collection of channels or talk groups belonging to the same repeater site. It defines all the parameters and protocol information required to access a site. Up to 16 systems of any type can be programmed. The maximum number of channels assignable to a system is limited to approximately 256 with standard models or approximately 500 with the 512-channel option (or the available memory space as described in the following information).ChannelsA channel selects a radio (RF) channel or talk group as follows:Conventional Analog Mode - A channel selects a specific radio channel, Call Guard (CTCSS/DCS) squelch coding, and other parameters unique to that channel.Conventional Project 25 Mode - A channel selects a specific radio channel, NAC squelch coding, talk group ID, and other parameters unique to that channel. Trunked Project 25 Mode - A channel selects a specific talk group ID and other parameters unique to that talk group.SMARTNET/SmartZone and Project 25 Trunked Operation - A channel selects a specific talk group, announcement group, emergency group, and other parameters unique to that talk group.As described in the preceding “Systems” descrip-tion, a maximum of up to 256 or approximately 500 channels can be programmed. Although it is theoreti-cally possible to program any combination of systems that produces up to 500 total channels, the maximum number is also limited by the available memory. For example, since more memory is required to program a SMARTNET system than a conventional system, the total number of channels decreases as the number of SMARTNET systems increases. The programming software displays a bar graph which shows the amount of available memory space that is used by the current data. Refer to Section 4 for more information. ZonesA zone is a collection of up to 16 channels of any type. For example, a zone could include 12 conven-tional channels and 4 SMARTNET channels. One use of zones may be to program the channels used for operation in a different geographical areas. Up to 16 zones can be programmed with standard models and up to 32 can be programmed if the 512-channel option is enabled. 1.2.6 SECURE COMMUNICATIONSecureNet™ voice encryption is used to provide secure communication with this transceiver. SecureNet is a proprietary Motorola protocol that digitizes the voice and then encrypts it using a DES algorithm. The following types of SecureNet encryption are available:Analog Conventional and SMARTNET/SmartZone Channels•DES (DES-XL is not available)Digital SMARTNET/SmartZone and Project 25 Channels•DES-OFB (Output Feedback)1.2.7 PROGRAMMINGTransceiver programming is performed using a PC-compatible computer, the EFJohnson 5100 Programming Cable, and PCConfigure programming software (see Table 1-1). Programming is described in Section 4.1.2.8 ALIGNMENTTransceiver alignment is performed using EFJohnson PCTune software and 5100 test box, and the same computer used for programming (see preceding section). All adjustments are made electron-

GENERAL INFORMATION1-3 Revised November 2002ically using the software (no manual adjustments are required). Refer to Section 6 for alignment information.1.3 PRODUCT WARRANTYThe warranty statement for this transceiver is available from your product supplier or from the Warranty Department, E.F. Johnson Company, 299 Johnson Avenue, P.O. Box 1249, Waseca, MN 56093-0514. This information may also be requested from the Warranty Department by phone as described in Section 1.7. The Warranty Department may also be contacted for Warranty Service Reports, claim forms, or any other questions concerning warranties or warranty service.1.4 PART NUMBER BREAKDOWNThe following is a breakdown of the part number used to identify this transceiver. Some combinations are not available.F (Frequency Band)1 - VHF (136-174 MHz)3 - UHF (403-470 MHz)4 - UHF (450-512 MHz)8 - 800 MHz9 - 900 MHzK (Keypad)*2 - Standard, Limited keypad3 - Standard, DTMF keypad6 - Intrin Safe, Limited keypad7 - Intrin Safe, DTMF keypadA (Antenna)0 - No antenna1 - VHF 136-151 MHz2 - VHF 151-162 MHz3 - VHF 162-174 MHz4 - UHF 403-520 MHz8 - 800 MHzB (Battery)0 - No battery1 - Ultra high capacity, NiMH6 - Intrin Safe, ultra high cap NiMHC (Reserved for future use)D Primary Operating ProtocolA - Analog ConventionalB - P25 ConventionalC - P25 TrunkingD - SMARTNET AnalogE - SMARTNET DigitalF - SmartZone AnalogG - SmartZone DigitalH - STAR Trunking AnalogJ - STAR Trunking DigitalK - Multi-Net AnalogNOTE: The above “D” character indicates only the primary protocol. Other protocols (and options) may also be included and are indicated by the next “E” letter.E OptionsThis letter indicates other operating protocols and options that are enabled by factory programming. Options may include encryption, OTAR, 512 Talk Groups, Digital SMARTNET/SmartZone, and others. Some combinations are currently be undefined, so use the Transfer > Read Options From Radio menu function of PCConfigure to determine which protocols and options are enabled in your radio (see Section 4).1.5 TRANSCEIVER IDENTIFICATIONThe transceiver identification number is printed on a label that is attached to the chassis. The following information is contained in the identification number:1.6 ACCESSORIESThe accessories available for this transceiver are listed in Table 1-1. 242-51FK-ABC-Dx51xx 0 A 12 2 A 12345Model RevisionLetterManufactureDateWarrantyNumberWeek No.of Year Last Digit of YearA = Waseca PlantFrom P.N.

GENERAL INFORMATION1-4 Revised November 20021.7 FACTORY CUSTOMER SERVICEThe Customer Service Department of the E.F. Johnson Company provides customer assistance on technical problems and the availability of local and factory repair facilities. Regular Customer Service hours are 7:30 a.m. - 5:30 p.m. Central Time, Monday- Friday. A technical support subscription service is available or support can be purchased on an as-needed basis. The Customer Service Department can be reached using the following telephone numbers:Toll-Free: (800) 328-3911FAX: (507) 835-6969E-Mail: customerservice@efjohnson.com You can also e-mail a person directly if you know their first initial/last name (example: jsmith@efjohnson.com).NOTE: Emergency 24-hour technical support is also available at the 800 and preceding numbers during off hours, holidays, and weekends. Table 1-1 AccessoriesAccessory Part No.Batteries2200 mAH NiCd 587-5100-2203600 mAH NiMH standard 587-5100-360Battery ChargersSingle-unit rapid chgr, w/o power supply 585-5100-210Single-unit rapid chgr/cond w/o pwr sup 585-5100-215Pwr supply, switching 120/230 VAC 1.3A 585-5100-230Docking station, 4-unit for -210 ( -250power supply included)585-5100-240Wall mount kit for docking station 585-5100-245Power supply, switching 120/230 VAC 4.5A for docking station585-5100-250Charger kit, -210 chgr, -230 PS, US cord 250-5100-210Charger kit, -215 chgr, -230 PS, US cord 250-5100-215Charger kit, -210 chgr, -230 PS, Eur cord 250-5100-220Charger kit, -215 chgr, -230 PS, Eur cord 250-5100-225Antennas136-151 MHz helical (yellow core) 501-0017-101151-166 MHz helical (black core) 501-0017-103166-174 MHz helical (blue core) 501-0017-105136-174 MHz wideband 501-0017-108Carrying AccessoriesBelt clip, 2-1/2” std spring loaded 585-5100-128Speaker/Microphones and EarphonesSpkr/mic, coil cord w/2.5mm earphone jk 589-0015-057Replacement coil cord for above spkr/mic 597-2002-101Earphone kit, coil cord w/2.5mm rt angleplug, for -057 spkr/mic589-5100-057Earphone kit, coil cord w/2.5mm straightplug, for -057 spkr/mic589-5100-059Earphone adapter, w/3.5 mm thrd jack 589-5100-051Lightwght headset w/inline PTT for -051 589-0015-0591-wire earphone kit, for -051 adapter 589-5100-0532-wire palm mic kit, for -051 adapter 589-5100-055Programming Accessories5100 Programming Kit (-488 software,-920 cable, CD manual)250-5100-0035100 Programming Cable 023-5100-9205100 Cloning Cable 023-5100-930PCConfigure programming software, CD 023-9998-488Adapter, DB9M-DB25F 515-9000-015Test Cables and AccessoriesPCTune radio tuning software 023-9998-499Radio test and Ethernet box 023-5100-900Cable, -900 test box to radio 023-5100-910DB9 M-F cable, 6 ft. (-900 to cmptr) 597-5900-002DB25M-DB9F cable, 6 ft (-900 to cmptr) 597-0005-057SMA F to BNC F adapter 515-3102-050SMA M to BNC F adapter 515-3102-060DES Encryption Keyloader DES Key Variable Loader (KVL) 585-5000-930Key loader to radio cable 585-5000-932Key loader charger (NLN8858) 585-5000-934Key loader spare battery (NLN9998) 585-5000-936Table 1-1 Accessories (Continued)Accessory Part No.

GENERAL INFORMATION1-5 Revised November 2002When your call is answered at the E.F. Johnson Company, you will hear a brief message informing you of numbers that can be entered to reach various departments. This number may be entered during or after the message using a tone-type telephone. If you have a pulse-type telephone, wait until the message is finished and an operator will come on the line to assist you. When you enter some numbers, another number is requested to further categorize the type of informa-tion you need. You may also contact the Customer Service Department by mail. Please include all information that may be helpful in solving your problem. The mailing address is as follows: E.F. Johnson CompanyCustomer Service Department 299 Johnson Avenue P.O. Box 1249 Waseca, MN 56093-0514 1.8 FACTORY RETURNSRepair service is normally available through local authorized E.F. Johnson Land Mobile Radio Service Centers. If local service is not available, the equipment can be returned to the factory for repair. However, it is recommended that you contact the Customer Service Department before returning equipment. A service representative may be able to suggest a solution to the problem making return of the equipment unnecessary. Be sure to fill out a Factory Repair Request Form #271 for each unit to be repaired, whether it is in or out of warranty. These forms are available free of charge by calling Customer Service (see Section 1.7) or by requesting them when you send a unit in for repair. Clearly describe the difficulty experienced in the space provided and also note any prior physical damage to the equipment. Include this form in the shipping container with each unit. Your telephone number and contact name are important as there are times when the technicians may have specific ques-tions that need to be answered in order to completely identify and repair a problem. When returning equipment for repair, it is also recommended that you use a PO number or some other reference number on your paperwork in case you need to call the repair lab about your unit. These numbers are referenced on the repair order and make it easier and faster to locate your unit in the lab. Return Authorization (RA) numbers are not necessary unless you have been given one by the Field Service Department. RA numbers are required for exchange units or if the Field Service Department wants to be aware of a specific problem. If you have been given an RA number, reference this number on the Factory Repair Request Form sent with the unit. The repair lab will then contact the Field Service Department when the unit arrives. For additional information on factory service, the Depot Service Department can be contacted at the following E-mail address: depotrepair@efjohnson.com1.9 REPLACEMENT PARTSReplacement parts can be ordered directly from the Service Parts Department. To order parts by phone, dial the toll-free number as described in Section 1.7. When ordering, please supply the part number and quantity of each part ordered. E.F. Johnson dealers also need to give their account number. If there is uncertainty about the part number, include the desig-nator (C512, for example) and the model number of the equipment the part is from. You may also send your order by mail or FAX. The mailing address is as follows and the FAX number is shown in Section 1.7. E.F. Johnson CompanyService Parts Department 299 Johnson Avenue P.O. Box 1249 Waseca, MN 56093-05141.10 INTERNET HOME PAGEThe E.F. Johnson Company has a site on the World Wide Web that can be accessed for information on the company about such things as products, systems, and regulations. The address is http://www.efjohnson.com.

GENERAL INFORMATION1-6 Revised November 20025100 SERIES PORTABLE SPECIFICATIONSThe following are general specifications intended for use in testing and servicing this transceiver. For current advertised specifications, refer to the specification sheet available from your sales representative. Values are typical and are subject to change without notice.GENERALFrequency Range VHF: 136-174 MHzAvailable Operating Modes Conventional analog, Project 25 conv. and trunked, SMARTNET/SmartZone analog and digital, Multi-Net (Multi-Net available with future release)Talk Groups 256 standard, up to 500 optional (dependent on available memory)Transmit/Receive Separation Any frequency within the rangeChannel Spacing VHF: 12.5, 25, and 30 kHzMaximum Deviation 25 kHz analog - 5 kHz12.5 kHz analog - 2.5 kHz12.5 kHz analog NPSPAC - 4.0 kHzFrequency Stability VHF - 2.0 PPM (–22 to +140° F or –30 to +60° C)Dimensions (w/o antenna) 6.7” H x 2.52” W x 1.9” D (17.0 cm x 6.4 cm x 4.8 cm) Weight (w/std battery) 24 oz. (675 g) Supply Voltage 7.2 volts DC nominalBattery Life 13 hours typical w/std 3600 mAH batteryCurrent Drain (maximum Standby - 350 mAw/backlight, w/o backlight Receive (rated audio out) - 500 mAsubtract 100 mA) Low Tx Power - 1.0 AHigh Tx Power - 2.0 A RECEIVERSensitivity 0.25 µV (analog mode 12 dB SINAD), 0.25 µV (digital mode 5% BER)Selectivity –75 dBSpurious and Image Rejection –75 dBIntermodulation –78 dB (VHF)Maximum Frequency Spread Any spread within the rangeAudio Power Output 500 mWAudio Distortion Less than 2% at 1 kHzTRANSMITTERRF Power Output VHF: 5W (high), 1W (low)Spurious and Harmonic Emissions –70 dB (VHF)FM Hum and Noise –45 dB at 25 kHz bandwidthAudio Modulation 16K0F3E, 8K10F1E, 11K0F3E VHF Audio Distortion Less than 2% at 1 kHzMaximum Frequency Spread Any spread within the band

Navigation menu

Upload a User Manual

Namespaces

Wiki Guide
HTML
PDF
Info

Views

User Manual
Discussion / Help

Navigation

© 2024 UserManual.wiki | Privacy Policy

Contact Us
DMCA