E RAE Electronics Industry Co EPM-5010 Plasma Display User Manual 42 V6 PDP Monitor manual P

Download:
Mirror Download [FCC.gov]
Document ID	513828
Application ID	o5iFF9GhmjHy8i/meCG20g==
Document Description	Users Manual Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	222.75kB (2784403 bits)
Date Submitted	2005-02-09 00:00:00
Date Available	2005-02-09 00:00:00
Creation Date	2005-02-09 16:30:19
Producing Software	[ClibPDF Library 2.02-r1-1] PrintToPDF 2.2.1
Document Lastmod	2005-02-09 16:30:49
Document Title	42_V6 PDP Monitor manual P.pdf
Document Creator	QuarkXPress¢‚ 4.1K
Document Author:	¿Ã ¿¸¿⁄

Changing Screen Size
Press
(Aspect Ratio Controller).
wide
Panorama
Zoom1
Zoom2
4 : 3 (normal)
14 : 9
In PC/ DVI input mode, you can only select either the wide or the normal (4 : 3) mode.
In Component 2(1080i) input mode, you can't Select Zoom2.
Zoom 1
wide
14 : 9
>> Screen Size > >
Panorama
4:3
Zoom 2
・wide - It makes 16 : 9 format for input signal.
・Panorama - It makes 4 : 3 format fit into 16 : 9 format with minimal loss
in content.
・Zoom 1 - It enlarges the natural screen factor by approx. 5 %
・Zoom 2 - It enlarges the natural screen factor by approx. 10 %
・4 : 3 - It is the standard format of broadcasting.
・14 : 9 - It makes 14 : 9 format for input signal.
27
・Viewing Picture in Picture
Viewing Picture in Picture
Press
Use
to move to
Press
to move to "Mode".
Press
to select.
Use
to select the "On".
Press
to go back to the previous menu.
Or press
Sound from only one of the screens may be heard.
● External Input
Press
to move to "Input Source".
Press
to select.
Use
to select the desired input source.
Press
to go back to the previous menu.
Or press


The sub-screen can be changed to display picture from the desired input source.
28
Viewing Picture in Picture
● Changing the Screen Size
Press
to move to "Size".
Press
to select.
Use
to select the desired size.
Press
to go back to the previous menu.
Or press
● Selecting Position
Press
to move to "Position".
Press
to select.
Use
to select the desired position.
Press
to go back to the previous menu.
Or press
Sub-screen position can be selected only from the
29
・Viewing Picture in Picture
・Auto Volume Level
・Stereo Settings
Viewing Picture in Picture
● Main Screen/Sub Screen Swap
Press
to move to "PIP Swap".
Press
to select.
Use
to select the "Yes".
Press
to select "OK".
Press
to go back to the previous menu.
Or press
The main screen and the sub screen will swap.
● Selecting Sub Screen Sound
Press
to move to "Sound Select".
Press
to select.
Use
to select the "Main" or "Sub".
Press
to go back to the previous menu.
Or press
The sound of the sub screen can be selected when PIP is being displayed.
30
포
Auto Volume Level
This feature maintains an equal Volume level ; even if you change channels.
Press
Use
to move to
Press
to move to "Auto Volume Level".
Press
to select.
Use
to select the "On".
Press
to go back to the previous menu.
Stereo Settings
Press
Use
to move to
Press
to move to "MTS".
Press
to select.
Use
to select the desired category.
Press
to go back to the previous menu.
31
・Resetting PDP Settings
・Setting Digital Noise Reduction
・Panel Safety
Resetting PDP Settings
It resets all of the parameters to the factory default.
Press
Use
to move to
Press
to move to "Reset".
Press
to select.
Use
to select the "Yes".
Press
to select
※ The PDP will turn off. The parameters will be set to factory default.
32
Setting Digital Noise Reduction
Use when screen is noissy or lines appear.
Press
Use
to move to
Press
to move to "Digital N/R".
Press
to select.
Use
to select the "On".
Press
to select.
Panel Safety
Press
Use
to move to
Press
to move to "Panel Safety".
Press
to select.
Use
to select desired category.
Press
to select.
Scroll
-On : The screen will move every 10 seconds.
① (C →L) ② (L→C) ③ (C →U) ④ (U→C)
⑤ (C→R) ⑥ (R→C) ⑦ (C→D) ⑧ (D→C)
-Off : The screen will be in place opposire way of scroll On.
Image Inversion- Enable signal for preventing image sticking.
Power Saving
-Mode 1 : Normal mode.(Default)
-Mode 2 : Supporting high power save mode.
-Mode 3 : Supporting middle power save mode.
-Mode 4 : Supporting low power save mode.
33
・Setting Time
・Automatic Power on/off
Setting Time
Press
Use
to move to
Press
to move to "Clock".
Press
to move one step.
Use
to adjust the desired hour.
Press
to move one step.
Use
to adjust the desired minute.
Press
to go back to the previous menu.
34
Automatic Power on/off
● Clock time must be set
Press
Use
to move to
Press
to move to desired category.
Press
to select.
Setting Time for Power On
Setting Time for Power Off
Setting Hour
Use
to select,
to set
Setting Minute
Use
to select,
to set
Set/Cancel
Use
to select,
to select the
"On" or "Off"
Volume Control
Use
to select,
to set volume
● To have the PDP turn off after you fall a sleep
press
It automatically turns off the PDP after a designated period of time
Depending on the number of times the "Sleep" button is pressed, the PDP will be turned off after 30, 60, 90, 120, 150
or 180 minutes.
35
・Using PDP as a Monitor
・Adjusting Colour Tone
・Adjusting PC Screen
Using PDP as a Monitor
Using as a Monitor
Press
Use
to move to "PC/ DVI".
Press
to select.
PC Mode must be on in order for you to use the PDP as a monitor.
Adjusting PC Screen
Use this function to remove or reduce noise impacts in case PDP vibrates and image boundary is unstable.
Press
Use
to move to
Press
to move to "PC".
Press
to select.
Use
to move to desired category.
Use
to adjust the setting.
Press
to go back to the previous menu.
※ Auto Adjustment, Phase, H-Position, V-Position are not adjustable in DVI input.
・Auto Adjustment : Use when the screen is not focused or centered.
・Phase : It adjusts the phase shift of the image. Use when image appears blurry or out of focus.
・H-Position : It moves the image on the screen horizontally.
・V-Position : It moves the image on the screen vertically.
36
Adjusting Colour Tone
Press
Use
to move to
Press
to move to "PC".
Press
to select.
Use
to move to "Colour Tone"
Press
to select.
Use
to select the desired category.
Press
to go back to the previous menu.
・Cool 1: This results in a blueish tone.
・Cool 2: This results in a more blueish tone.
・Normal : This is standard colour setting.
・Warm1 : This results in a reddish tone.
・Warm2 : This results in a more reddish tone.
37
・External adjustment
・Set ID
External adjustment
・Use the RS-232C jack to control monitor's functions externally by external equipment.
● How connect a external equipment

38
Set ID
Use this function to choose monitor ID number.
Press
Use
to move to
Press
to move to "Set ID".
Press
to select.
Use
to select the desired ID number.
Press
to go back to the previous menu.
The adjustment range of Set ID is 0 ~ 99.
39
・Special features
・RS232C Communication Protocol
Special features
● Type of connector : D-Sub 9-pin male
No.
Pin name
①
No connection
⑤
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (Dce side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
⑨
Pin NO.4 and Pin
NO.6 must be
connected on
monitor side
⑥
・Use a crossed (reverse) cable.
Wire the cable so that each pair of data lines cross between the two devices. These data line pairs are RXD
(Receive to send) and TXD (Transmit data), DTR (DTE side ready) and DSR (DCE side ready), and RTS
(Ready to send) and CTS (Clear to send).
● RS-232C configurations
・7-wire configuration
(Standard RS-232C cable)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
PDP
D-sub 9
40
D-sub 9
Control line
・3-wire configuration
(Not standard)
TXD
RXD
GND
DSR
DTR
CTS
RTS
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
PDP
D-sub 9
D-sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
RS232C Communication Protocol
● COMMUICATION PARAMETERS
BAUD RATE : 9600 bps
Data Length : 8bits
Parity : None
Stop bit : 1bit
※ The Remote Control and PDP Key Control(Except Main Power) Don't Operate When Controlling PDP Set by PC.
● Command List
Item
Data(hex)
Item
1. Power
ASCII Code
00h~01h
11. Sharpness
2. Input Source
00h~07h
3. Aspect Ratio
00h~08h
4. Volume Mute
ASCII Code
Data(hex)
00h~64h
12. Information
00h~01h
13. Pip On
00h~01h
00h~01h
14. Pip Source
00h~07h
00h~03h
5. Volume Control
00h~64h
15. Pip Location
6. Screen Mode
00h~04h
16. Pip Sound set
00h~01h
00h~02h
7. Brightness
00h~64h
17. Pip Mode
8. Contrast
00h~64h
18. Remote Control On
00h~01h
00h~01h
00h~04h
9. Colour
00h~64h
19. Abnormal State
10. Tint
00h~64h
20. Sound Mode
● Tramsmission / Receiving Protocol List
* Transmission
{Command}{ }{SET ID}{ }{Data}{Cr}
{Commad}
{}
{SET ID}
{Data}
{Cr}
To Control Code PDP
"Space , ASCII Code = 0x20"
You Can Adjust SET ID Setup
Menu of PDP
Data Command
Transmit 'FF' data to data
read mode
Carriage Return
ASCII Code 0x0d
* Ok Acknowledge
{SET ID}{:}{OK}{x}{Data}{x}
The PDP set transmits ASCII based on this format When receiving normal data. At this time, If
the data is data read mode, it indicates present
st at us data if t he data is dat a write mode, it
returns the data of PC.
* In case set ID is 0, Ack data doesn’t feed back, and
you can adjust all PDP set.
41
・RS232C Communication Protocol
RS232C Communication Protocol
1. Power : p
▶ To Control Power On/Off of the PDP
* Transmission
{p}{ }{SET ID}{ }{Data}{Cr}
Data 0 : Off
Data 1 : On
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : Off
Data 1 : On
▶ Read Power On Source Status
* Transmission
{p}{ }{SET ID}{ }{FF}{Cr}
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : Power Off
Data 1 : Power On
Data 2 : Power On Composite
Data 3 : Power On S-Video
Data 6 : Power On Component1
Data 7 : Power On Component2
Data 8 : Power On PC(RGB)
Data 9 : Power On DVI
※ If Other Functions Transmit 0xFF data based on this
format, Ack data feeds back present status about
each function.
2. Input Source : i
▶ To Input Source Select
* Transmission
{i}{ }{SET ID}{ }{Data}{Cr}
Data 1 : Composite
Data 2 : S-Video
Data 3 : Not available
42
Data 4 : Not available
Data 5 : Component1
Data 6 : Component2
Data 7 : PC(RGB)
Data 8 : DVI
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 1 : Composite
Data 2 : S-Video
Data 3 : Not available
Data 4 : Not available
Data 5 : Component1
Data 6 : Component2
Data 7 : PC(RGB)
Data 8 : DVI
3. Aspect Ratio : r
▶ To adjust screen format
* Transmission
{r}{ }{SET ID}{ }{Data}{Cr}
Data 0 : Wide
Data 1 : Panorama
Data 2 : Zomm1
Data 3 : zomm2
Data 4 : 4:3
Data 5 : 14:9
Data 6 : 4:3(In PC Mode)
Data 7 : Wide(In PC Mode)
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : Wide
Data 1 : Panorama
Data 2 : Zomm1
Data 3 : zomm2
Data 4 : 4:3
Data 5 : 14:9
Data 6 : 4:3(In PC Mode)
Data 7 : Wide(In PC Mode)
RS232C Communication Protocol
4. Volume Mute : w
7. Brightness : b
▶To Select volume mute on/off
* Transmission
{w}{ }{SET ID}{ }{Data}{Cr}
Data 0 : On
Data 1 : Off
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : On
Data 1 : Off
▶ To adjust Brightness
* Transmission
{b}{ }{SET ID}{ }{Data}{Cr}
Data : Min : 00h~Max : 64h
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data : Min : 00h~Max : 64h
8. Contrast : k
5. Volume Control : v
▶ To adjust volume
* Transmission
{v}{ }{SET ID}{ }{Data}{Cr}
Data : Min : 00h~Max : 64h
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data : Min : 00h~Max : 64h
▶ To adjust Contrast
* Transmission
{k}{ }{SET ID}{ }{Data}{Cr}
Data : Min : 00h~Max : 64h
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data : Min : 00h~Max : 64h
9. Colour : c
6. Screen Mode : s
▶ To Select Screen Mode
* Transmission
{s}{ }{SET ID}{ }{Data}{Cr}
Data 0 : Custom
Data 1 : Dynamic (In PC Mode : High)
Data 2 : Standard (In PC Mode : Middle)
Data 3 : Movie (In PC Mode : Low)
Data 4 : Mild
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : Custom
Data 1 : Dynamic
Data 2 : Standard
Data 3 : Movie
Data 4 : Mild
▶ To adjust Colour (Not available in PC Mode)
* Transmission
{c}{ }{SET ID}{ }{Data}{Cr}
Data : Min : 00h~Max : 64h
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data : Min : 00h~Max : 64h
10. Tint : t
▶ To adjust Tint (Not available in PC Mode)
* Transmission
{t}{ }{SET ID}{ }{Data}{Cr}
Data : Min : 00h~Max : 64h
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data : Min : 00h~Max : 64h
43
・RS232C Communication Protocol
RS232C Communication Protocol
11. Sharpness : h
14. Pip Source : u
▶ To adjust Sharpness
* Transmission
{h}{ }{SET ID}{ }{Data}{Cr}
Data : Min : 00h~Max : 64h
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data : Min : 00h~Max : 64h
▶ To Select Pip Source
* Transmission
{u}{ }{SET ID}{ }{Data}{Cr}
Data 1 : Composite
Data 2 : S-Video
Data 3 : Not available
Data 4 : Not available
Data 5 : Component1
Data 6 : Component2
Data 7 : PC(RGB)
Data 8 : DVI
12. Information : f
▶ Information on/off
* Transmission
{f}{ }{SET ID}{ }{Data}{Cr}
Data 0 : On
Data 1 : Off
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : On
Data 1 : Off
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 1 : Composite
Data 2 : S-Video
Data 3 : Not available
Data 4 : Not available
Data 5 : Component1
Data 6 : Component2
Data 7 : PC(RGB)
Data 8 : DVI
15. Pip Location : n
13. Pip On : o
▶ Pip on/off
* Transmission
{o}{ }{SET ID}{ }{Data}{Cr}
Data 0 : On
Data 1 : Off
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : On
Data 1 : Off
44
▶ To Select Pip Position
* Transmission
{n}{ }{SET ID}{ }{Data}{Cr}
Data 0 : Right Bottom
Data 1 : Right Top
Data 2 : Left Top
Data 3 : Left Bottom
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : Right Bottom
Data 1 : Right Top
Data 2 : Left Top
Data 3 : Left Bottom
RS232C Communication Protocol
16. Pip Sound Set : e
19. Abnormal Status : q
▶To Select Pip Sound
* Transmission
{e}{ }{SET ID}{ }{Data}{Cr}
Data 0 : Main
Data 1 : Sub
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : Main
Data 1 : Sub
▶ You Can Read PDP Status
* Read Only Mode
* Transmission
{q}{ }{SET ID}{ }{FF}{Cr}
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : OK
17. Pip Mode : d
▶ To Select Pip Mode
* Transmission
{d}{ }{SET ID}{ }{Data}{Cr}
Data 0 : PIP
Data 1 : PBP1
Data 2 : PBP2
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : PIP
Data 1 : PBP1
Data 2 : PBP2
18. Remote Control On : j
Data 1 : Stanby
Data 2 : AC Downr
20. Sound Mode : y
▶ To Select Sound Mode
* Transmission
{s}{ }{SET ID}{ }{Data}{Cr}
Data 0 : Custom
Data 1 : Standard
Data 2 : Music
Data 3 : Movie
Data 4 : Speech
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : Custom
Data 1 : Standard
Data 2 : Music
Data 3 : Movie
Data 4 : Speech
▶ To Select Remote Control on/off
* Transmission
{j}{ }{SET ID}{ }{Data}{Cr}
Data 0 : Pc Control
Data 1 : Remote Conroller On
* Ack
{SET ID}{:}{OK}{x}{Data}{x}
Data 0 : Pc Control
Data 1 : Remote Conroller On
45
・Trouble shooting Tips
In case a problem occurs with your PDP, please take the following steps first.
If you still have the problem, turn the power off and contact your dealer or an authorized service center.
● Screen related Matters
Problem Action
The screen does not appear.
Is the power plug pulled out? Insert the power plug. Turn the main
power button on and press the power button of the remote controller.
The screen appears too
slowly after the power is turned on.
This problem occurs for a brief time in the process of
image elimination processing in order to hide temporary screen noise
that occurs when the power is turned on. But if the screen does not
come after 1 minute has passed, contact your dealer or an authorized service center.
Screen is too bright or too dark.
Perform brightness adjustment or Contrast adjustment. (Please refer
to page 23)
Screen is too large or too small.
Adjust the screen size. (Please refer to page 27)
Stripes appear on the screen
and it shakes.
Stop using wireless telephones, hair driers and electric drills.
Simultaneous Screen
does not appear.
Check that PDP and external equipment are connected.
Check the inputs of simultaneous screen by pressing sub-screen
selection.
The screen does not move.
Press the STILL button. (Please refer to page 21) Check if the Pause
button is pressed on external equipment.
Computer Input Screen is abnormal.
Perform manual fine adjustment (Please refer to page 36).
Automatic Turn On does not work.
Automatic Turn On function works only when turning the PDP off with
the remote controller or Standby button.
46
● Sound related Matters
Problem
Action
Screen appears, Voice is not heard
1. Press the "Mute"button. (page 21)
2. Increase the sound by pressing volume adjustment button.
3. Check if voice terminal of external input is connected properly.
4. Check if speaker cables are connected properly.
5. If it is on PIP mode, convert audio of main screen and subscreen by pressing S.SELECT.
6. Select and check the other input.
If the sound still does not work and the other channels are the same
after you have done as the above, contact your dealer or
an authorized service center.
Lots of noise (static) occurs.
When connecting a Set-Top-Box, check that it is on stereo broadcasting. If it is, the program may not be available or the reception may be
bad. Check the audio source with another player. If that source is good,
contact your dealer or an Authorized service center.
47
・Trouble shooting Tips
● Others
Problem
Remote controller does not work.
Action
1. Check if main power is On.
2. Check that the batteries of the remote controller
were loaded properly.
3. Check to see if any obstacle exists between the
PDP and the remote controller and remove it, if
any.
4. If the batteries have no power, replace them with
two new batteries.
PDP makes strange noise.
It is the noise when the mechanism expands or contracts from to changes to the environment due to factors such as humidity, temperature, etc. It is not a failure.
PDP indication lamp is On.
The red means the Stand-by power is ON. It will take
a few seconds to turn off as the main power is off.a
This PDP is for household use and registered as suitable on electromagnetic waves. Therefore,
you can use it in every location as well as residential areas.
48
● Supporting display mode
It is optimal screen when the resolution i s 1024x768 or 1280x 1024.
Resolution
Horizontal Frequency (KHz)
640×480
720×400
800×600
1024×768
1280×1024
Vertical Frequency (Hz)
31.47
60
37.86
72
37.50
75
31.47
70
35.15
56
37.88
60
48.88
72
46.88
75
53.7
85
48.36
60
56.48
70
60.02
75
68.677
85
63.981
60
79.976
75
● Considerations in Installation
If any signal of unsupported resolution is input, the "Out of Range" message appears.
49
・Supported Display Modes
・Memo
● Component Mode [ Y, CB (P B), CR (PR) ]
Resolution
Horizontal Frequency (KHz)
Vertical Frequency (Hz)
720×480
15.73
60.00
SDTV, DVD 480i
720×576
15.63
50.00
SDTV, DVD 576i
720×480
31.47
59.94
SDTV, 480p
720×576
31.25
50.00
HDTV, 576p
1280×720
37.50
50.00
HDTV, 720p
1280×720
45.00
60.00
HDTV, 720p
1920×1080
28.12
50.00
HDTV, 1080i
1920×1080
33.75
60.00
HDTV, 1080i
● Specifications
Aspect Ratio
Screen Size (H×V)
1106.5×622.1mm
Resolution
1366×768(Wide VGA)
Cell pitch (H× V)
0.270(H)×0.810(V)mm
Displayable Colors
16.77M(256×256×256)
Brightness
Contrast
Viewing Angle
1000cd /㎡(w/o filter)
5000:1
over 160 。
Input signal
PAL, SECAM, NTSC
SD, HD, VGA, SVGA, XGA
RGB Input
D-Sub(15pin), DVI
AC Input
Power Consumption
50
16 : 9
AC100-240V~, 50 / 60Hz, 5A
450W
USER INFORMATION
Note: This equipment has been tested and found to comply with the
limit for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protect ion
against harmful interference when the equipment is operat ed in a
commercial environment.
This equipment generates, uses and can radiat e radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference t o radio communications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to connect the interference at his own expense.
Change or modification not expressly approved by the party respon sible for compliance could void the user’s aut hority t o operate the
equipment.
This is a class B product. In a domestic environment this product
may cause radio interference in which case the us er may be
required to take adequate measures.


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 26
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:415024b8-64c4-46fd-bc51-1122b79ae1dd
Modify Date                     : 2005:02:09 16:30:49+01:00
Create Date                     : 2005:02:09 16:30:19+01:00
Metadata Date                   : 2005:02:09 16:30:49+01:00
Document ID                     : uuid:6ef7c45f-29ea-4cd5-81ac-4291f411c9d5
Format                          : application/pdf
Title                           : 42_V6 PDP Monitor manual  P.pdf
Creator                         : QuarkXPress¢‚ 4.1K
Author                          : ¿Ã  ¿¸¿⁄
Subject                         : 
Producer                        : [ClibPDF Library 2.02-r1-1] PrintToPDF 2.2.1

EXIF Metadata provided by EXIF.tools