EGATEL SL 820003-02 Satellite Terminal Equipment User Manual Smart LNB Instalation Manual E05 Lab E06

EGATEL SL Satellite Terminal Equipment Smart LNB Instalation Manual E05 Lab E06

Contents

Installation Guide 02

   Smart LNB IST- Interactive Satellite Temnal Installation Manual ©  EGATEL S.L.  |  32901 Ourense, España  | www.egatel.es   Emulsion Terminal
ER-0120/2002            Installation Manual Interactive Satellite Terminal. Reference: Smart LNB. Printed: January 2016 Edition: E05                                               This document and all information contained therein it is owned by Egatel S.L. It should not be copied, published or reproduced in whole or in part, without express consent from the owner.
                   Página 3        Egatel IST. Interactive Satellite Terminal Smart LNB  Index  INTERACTIVE SATELLITE TERMINAL. SMART LNB.   1. FCC COMPLIANCE .......................................................................................... 4 2. TECHNICAL FEATURES .................................................................................. 5 3. GENERAL DESCRIPTION. ............................................................................... 6 4. ELEMENTS CONTAINED IN THE PACKAGE. ................................................ 7 5. INSTALLATION OVERVIEW. ........................................................................... 7 6. ANTENNA SYSTEM. ........................................................................................ 8 6.1. Technical features. ........................................................................... 8 6.2. Setting up the antenna. ..................................................................... 9 7. OUTDOOR UNIT. ODU. .................................................................................. 20 8. INDOOR UNIT. IDU. ........................................................................................ 21 9. INTERCONNECTION. ..................................................................................... 22 10.  ANNEX ............................................................................................................ 25 10.1. Ku / ku dish. .................................................................................. 25 10.2. Radiation pattern .......................................................................... 26 10.3. Detailed diagram of the components supplied with the antenna. .. 35
                Page 4 Egatel IST. Interactive Satellite Terminal Smart LNB  INTERACTIVE SATELLITE TERMINAL. SMART LNB.  1.  FCC COMPLIANCE  The Smart LNB complies with part 15 of the FCC Rules.   Operation is subject to the following two conditions:  1.   This device may not cause harmful interference. 2.   This  device  must  accept  any  interference  received,  including  interference  that   may cause undesired operation.  This  device  works  in  combination  with  an  off-set  horn-fed  dish  antenna  with  a maximum gain of 39.4 dB  This device has been granted with the following FCC ID: 2AGKM820003-02   Danger: FCC Radio Frequency Exposure Information  In  order  to  comply  with  the  FCC  RF  exposure  requirements,  it  is required to maintain a separation distance between the user and the antenna  of  11.76m  (antenna  main beam)  and  27cm (horizontal:  -10 degrees off-axis).   NOTE: This equipment has been tested and found to comply with the limits for class B  digital  device,  pursuant  to  part  15  of  the  FCC  Rules.  These  limits  are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the instructions,  may  cause  harmful  interference  to  radio  communications. However, there is no guarantee that interference will not occur in a particular installation.  If  this  equipment  does  cause  harmful  interference  to  radio  or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: − Reorient or relocate the receiving antenna. − Increase the separation between the equipment and receiver. − Connect  the  equipment  into  an  outlet  on  a  circuit  different  from  that  to which the receiver is connected. − Consult the dealer or an experienced radio/TV technician for help.
                Page 5 Egatel IST. Interactive Satellite Terminal Smart LNB  2.  TECHNICAL FEATURES  General  Composition………………………………..  Antenna, Outdoor Unit, Indoor Unit. Antenna……………………………………..  Satellite dish. Diameter 75 cm. ODU Dimensions (without LNB)………....  127 x 144 x 77 mm. (L x W x D) IDU Dimensions……………………………  30 x 150 x 110 mm. (L x W x D)  Outdoor Unit. ODU Connectors ………………………………..  F (F), 75 Ω: External LNB Connection   F (F), 75 Ω: IDU Connection Control and Management…….................  Web GUI. (Via IDU). Reception Frequency band……..………………….  Ku Band.    Low Band: 10,7 – 11,7 GHz   High Band: 11,7 - 12,75 GHz. Standard…………………………………  DVB-S/S2. (EN 302 307)  Transmission Frequency band……..………………….  Ku Band. 13,75 GHz - 14,50 GHz. Standard ………………………………..  F-SIM.   Maximum output Power………………… 31,5 dBm.   Indoor Unit. IDU Connectors………………………………….. F (F), 75 Ω: ODU Connection.   F (F), 75 Ω: STB Connection.   RJ45: Ethernet. LAN Connection.   DC IN. (+30Vdc).   Control and Management…….................  Web GUI.
                Page 6 Egatel IST. Interactive Satellite Terminal Smart LNB  3.  GENERAL DESCRIPTION.   The Smart LNB is an electronic device that opens the door to a new wide range of satellite services.    It features the most advanced technology in satellite transmission and it makes use of a high spectrum efficiency modulation for the uplink.  This technology allows satellite operators to offer their services in either unconnected or connected areas, at a low cost at the equipment and service level.  − Its  objective  is  to  provide  high  added  value  services  to  traditional  satellite broadcasting. − Interactive services: HbbTV, VoD, FB, Twitter, telemetry .…. − High  added-value  M2M  services/  domotics:  Home  control  automation,  e-health, connected TV...)    The Smart LNB is based on the following devices: | Antenna System. Satellite dish and other devices needed for its attachment.  | ODU: Outdoor unit. Installed at the antenna’s arm.  | IDU: Indoor unit. Located inside the building.    Fig.1. General Scheme.
                Page 7 Egatel IST. Interactive Satellite Terminal Smart LNB  4.  ELEMENTS CONTAINED IN THE PACKAGE.   The package contains:  | Antenna dish. | Feed arm and fasteners. | Indoor unit and Power Converter. | Outdoor unit (with LNB).   5.  INSTALLATION OVERVIEW.   The  image  below  shows  the  results  of  a  typical  installation  as  described  in  the following pages. Please read these pages carefully to perform the installation.    Fig.2. Installation Overview.
                Page 8 Egatel IST. Interactive Satellite Terminal Smart LNB  6.  ANTENNA SYSTEM.  The transmission and reception system comprises the following elements:  | Satellite antenna. Reflected dish with a diameter of 75cm. | Masthead and anchorages.  6.1.  Technical features.  DOWNLINK  Satellite Reception  Interactive Services Broadcast Services Standard  DVB-S/S2 Ku Band  Low Band: 10,7 Ghz … 11,70 GHz High Band: 11,7 Ghz … 12,75 GHz UPLINK  Satellite Transmission  IP Data for interactive applications. Standard  F-SIM Ku Band  13,75 Ghz … 14,5 GHz. Maximum output Power  31,5 dBm GENERAL Athimut Angle Range   360º Elevation Angle Range   10 to 90    Feed Interface Diameter  23 mm adapter Mast Pipe interface  32mm – 60 mm ENVIRONMENTAL REQUIREMENTS  Operational Wind loading 77 Km / h Survival windload  144 Km / h Destructive Windload  216 Km / h
                Page 9 Egatel IST. Interactive Satellite Terminal Smart LNB  6.2.  Setting up the antenna.  Installig the antenna includes the following steps:  − Step 1:   Choosing a suitable location. − Step 2:   Mounting the antenna pole. − Step 3:   Mounting the antenna. − Step 4:   Pointing the antenna.    Do not stand in front of the LNB or the antenna dish during pointing. Keep the space between the LNB and the antenna dish clear.  6.2.1.  Step 1: Choosing a suitable location.  − When  setting  up  the  antenna  base,  take  account  of  the  orientation  the antenna must have.  − The antenna needs a clear view towards the satellite (without any buildings, trees... that may hinder the signal).    Fig.3. Antenna system.    The antenna must have clear line of sight and no obstruction blocking the path between the antenna and the satellite.
                Page 10 Egatel IST. Interactive Satellite Terminal Smart LNB  6.2.2.  Step 2: Mounting the antenna pole.  − When fixing the antenna pole on the base, use a spirit level to make sure the antenna pole stands upright. − The antenna pole must be made of galvanized steel.  − Mast pipe interface: 32 mm … 60 mm. (Antenna’s pole diameter).  6.2.3.  Step 3: Mounting the antenna.  − Antenna arm comprises two parts, Part1 and Part2. One of them holds the Outdoor unit, and the other one is screwed to the antenna dish. These two parts are joined through a junction.  − Rotate and screw the piece with the elevation scale. (1, B, E). Tightening: E - 2 Nm.     Fig.4. Antenna arm.   Identification  Description  Units 1  Arm (Part 1)  1 B  M8 x 16 mm ovel head, short neck  4 E  M8  Nut .   4
                Page 11 Egatel IST. Interactive Satellite Terminal Smart LNB  − Place the fine elevation bolt as shown below (1, E, J). The elevation bolt includes: Two toothed discs and a pole. Tightening: E - 15 Nm.    Fig.5. Elevation bolt.  Identification  Description  Units 1  Arm (Part 1)  1 E  M8  Nut .   1 J  Elevation bolt (2 discs and a pole)  1   − Screw the junction of the arm as shown below. (1, 2, C, E). Tightening: A – 10 Nm. C - 15 Nm.  − Screw the part of the arm (3) that holds the Outdoor unit. (1, 2, 3, A, E). Tightening: B - 10 Nm.      Fig.6. Arm pieces.
                Page 12 Egatel IST. Interactive Satellite Terminal Smart LNB   Identification  Description  Units 1  Arm (Part 1).  1 2  Arm junction  1 3  Arm (Part 2). 1 A  M8 x 45 oval head, short neck  2 C  M8 x 16 mm ovel head, long neck  5 E  M8  Nut  7   − Insert two squares U-bolt in the masthead (4). Use the Pole Clamps (H) and washers (E) to attach antenna to the antenna pole (4).  Tightening: E - 2 Nm.        Fig.7. Pieces to attach the antenna to the masthead.   Identification  Description  Units H  Square U-bolt. M8 x 240  2 I  Pole Clamp  2 4  Antenna pole  1 E  M8  Nut  4
                Page 13 Egatel IST. Interactive Satellite Terminal Smart LNB  − Attach the LNB holder to the antenna’s arm. (3, 5, A, D, E, G).     Fig.8. LNB and Outdoor Unit holder.   Identification  Description  Units 3  Arm (Part 2). 1 5  LNB clamp (2 pieces)  1 A  M8 x 45 mm oval head, short neck  1 D  M 6 x 12 total   2 E  M8 nut  1 G  M6 nut  2  − Attach the dish to the masthead with the appropriate screws and nuts. (6, D, F).  Tightening: F - 15 Nm.     Fig.9. Antenna’s dish.
                Page 14 Egatel IST. Interactive Satellite Terminal Smart LNB  Identification  Description  Units 6  Antenna’s dish. Diameter: 75 cm  1 D  M 6 x 12 total   4 F  M8rM6 nut  4   − Attach the Outdoor Unit to the LNB. (7, 8, 9, J, K).     Fig.10. Outdoor Unit & LNB.  Identification  Description  Units 7  Outdoor Unit. ODU  1 8  O-ring (MU1551)  1 9  LNB. [F/D = 0.78].  1 J  M4x10 screw    4 K  M4 nut.  4  − Attach the Outdoor Unit and the LNB to the antenna’s arm. (7, D, G).       Fig.11. Outdoor Unit & LNB.
                Page 15 Egatel IST. Interactive Satellite Terminal Smart LNB  Identification  Description  Units 7  Outdoor Unit. ODU  1 D  M 6 x 12 total   2 G  M6 nut  2   At this point, the antenna is mounted.    Fig.12. Antenna, ODU and LNB.   − Roof Mount / Wall Mount. Optional.   This antenna can be placed on the roof or on a wall. The best place will be selected in each location. The following accessories would be supplied.   Identification  Description  Units A  M8 x 70  2 B  M8 nut  2 C  Cover  1
                Page 16 Egatel IST. Interactive Satellite Terminal Smart LNB          Fig.13. Antenna assembly   − External LNB. Optional.  The outdoor unit can be connected to an external LNB placed at the antenna’s arm.     Fig.14. External LNB.
                Page 17 Egatel IST. Interactive Satellite Terminal Smart LNB  6.2.4.  Step 4: Pointing the antenna  The parameters needed to pointing the antenna are: − Azimuth − Elevation and − Polarization at the antenna’s location. Antenna’s  orientation  is  specific  to  each  location.  Look  up  the  value  that applies to your position.    Eutelsat has an app to point antennas: Eutelsat Satellite Finder. It  is  an  easy-to-use  tool  to  point  satellite  antennas.  It  provides  basic parameters for exact antenna pointing, from elevation and azimuth angles to line-of-sight  and  optimal  polarization  angles.  Download  free-of-charge  from iTunes and Google Play.      Fig.15. Pointing the antenna.                                              Example. Eutelsat app.   o  The procedures  relating to  horizontal  and  vertical pointing are  described below in a sequential way. In reality, you will have to perform these two procedures simultaneously. o  Whenever the procedure tells you to loosen a securing bolt or nut, slacken it just enough to allow the corresponding element to move freely. o  While  performing  this  vertical  rough  pointing,  you  will  need  to  hold  the antenna to prevent it from inadvertently losing its position.
                Page 18 Egatel IST. Interactive Satellite Terminal Smart LNB  Elevation. (Vertical)     Fig.16. Pointing the antenna. Elevation.  | Loosen securing bolts.  | Rotate the elevation bolt to move the antenna to the required elevation. See the elevation scale drawn in the antenna to fix the desired elevation. (Up  - Down). | Tighten securing bolts. Tightening: 15 Nm.  Azimuth. (Horizontal).      Fig.17. Pointing the antenna. Azimuth.  | Loosen bracket nuts.  | Slowly move the dish horizontally (E – W). | Secure the bracket nuts. Tightening: 10 Nm.
                Page 19 Egatel IST. Interactive Satellite Terminal Smart LNB  To set the azimuth, a compass or mobile application could be useful.    Fig.18. Mobil application. Compass.   Polarisation.   | Look up the angle that applies to the position of the antenna. | Check the scaling on the Feed horn and set it to the appropriate angle. | Lock the LNB in the clamp with the securing bolt.    Fig.19. Polarisation.   Beeper   In  the  future,  the  ODU  will  include  a  “Beeper”  to  help  you  point  the  antenna correctly. During  the  pointing  procedure,  the  “beeper”  can  produce  various  sounds,  each having a specific meaning, for example: −  The antenna points to a wrong satellite.  −  The antenna points to the correct satellite. −  The antenna does not receive the strongest signal. −  The antenna points to the correct satellite and is receiving the strongest signal.
                Page 20 Egatel IST. Interactive Satellite Terminal Smart LNB  7.  OUTDOOR UNIT. ODU.  The ODU, Outdoor Unit, is housed in a waterproof case located at the antenna’s arm. It can be connected to an external LNB and it is powered by the IDU.   Fig.20. Outdoor Unit. ODU.   | Interfaces: − F type connector facing the Indoor Unit. − F type connector facing the External LNB.     Fig.21. ODU Interfaces.
                Page 21 Egatel IST. Interactive Satellite Terminal Smart LNB  8.  INDOOR UNIT. IDU.  The IDU, Indoor Unit, is located inside the building.  Its design  is based  on a  compact and easy-to-use terminal that features the latest Home Plug-AV (HPAV) technology.    Fig.22. Indoor Unit. IDU.   | Signalling leds:  Led  Colour  Description Power  Green  Power supply presence. Link  Green  Communication between IDU & ODU.  Data Coax  Yellow  Data transfer activity between IDU & ODU.   | Interfaces. The Indoor Unit has four ports to interface with the external world: − RJ-45 port to connect the IDU to the user's LAN. (Web GUI). − F-type connector facing the Outdoor Unit. − F-type connector facing the user's Set-Top-Box. − DC port for external 30V power supply. (30V / 2A Desktop AC/DC adapter).     Fig.23. Indoor Unit’s rear panel.
                Page 22 Egatel IST. Interactive Satellite Terminal Smart LNB  9.  INTERCONNECTION.    Fig.24. Interconnection general scheme.   *   The set top box (STB) is not provided by Egatel.
                Page 23 Egatel IST. Interactive Satellite Terminal Smart LNB  9.1.  ODU – IDU Connection  When pointing is  completed, connect the  Tx/Rx cable between  the  ODU and the IDU.    Fig.25. ODU – IDU Interconnection.   Note:     The  length  and  type  of  coaxial  cable  connecting  ODU  and  IDU  must guarantee  a  resistance  lower  than  10  ohm.  (Inner  +  outer).  Example RG6U.  9.2.  External LNB Connection  If the system includes an external LNB, plug the coaxial cable as shown below.     Fig.26. External LNB connection. | Coaxial Cable. | Connectors: F (M).  | Coaxial Cable. | Connectors: F (M).
                Page 24 Egatel IST. Interactive Satellite Terminal Smart LNB  9.3.  IDU Connection  As it has been explained before, the Indoor Unit has four ports to interface with the external world. | F type connector facing the Outdoor Unit. (See ODU – IDU connection). | RJ-45 port to connect the IDU to the user's LAN. (Web GUI). Plug a network cable in the Indoor unit and the computer‘s Ethernet port. – Ethernet Cable: UTP Cat5. – Connectors: RJ-45. | DC port for external power supply.  Connect  the  Indoor  Unit  to  a  wall  outlet  through  the  Power  Adapter  provided: AC/DC Adapter, +30V / 2A.    Fig.27. LAN and Power supply connection.
                Page 25 Egatel IST. Interactive Satellite Terminal Smart LNB  10.  ANNEX  10.1.  Ku / Ku Dish.  The following table gathers the major antenna Ku/Ku parameters.  Antenna Parameters   Type  Offset  Offset   20,8º Reflector Diameter   750 x 802 mm Focal Distance   585 mm F/D Ratio  0,78 Frequency Range (GHz)  RX: 10,7 - 12,75 GHz TX:  13,75 – 14,5 GHz Reflector material  Galvanized Steel Reflector Thickness   0,65 mm Polarization  Linear/Circular Gain @ 14,50 GHz   39,4 dBi Elevation Adjustment Range   10º to 90º Azimuth Adjustment Range   360º Mast Pipe Interface   40 – 60 mm Feed Interface Diameter   23 mm adapter 77 (IEC1114-2 Standard)  77 (IEC1114-2 Standard) Survival Windload   144 km/h (IEC1114-2 Standard) Destructive Windload  216 Km/h (IEC1114-2 Standard)
                Page 26 Egatel IST. Interactive Satellite Terminal Smart LNB  10.2. Radiation pattern  10.2.1. Relevant values extracted from the diagrams  Horizontal polarization  Plane ϕ=0º  LF 3dB  (º)  LF 10dB  (º)  Isolation (dB)  1st Null Level  (dB)  1st Null Position (º)  1st L.S. Level  (dB)  1st L.S. Position (º) 2  4  >30  -23,4  -3  -17,4  -3,5   Plane ϕ=90º  LF 3dB  (º)  LF 10dB  (º)  Isolation (dB)  1st Null Level  (dB)  1st Null Position (º)  1st L.S. Level  (dB)  1st L.S. Position (º) 1,5  3  >23  -27,4  2,5  -18,1  3,5   Vertical polarization  Plane ϕ=0º  LF 3dB  (º)  LF 10dB  (º)  Isolation (dB)  1st Null Level  (dB)  1st Null Position (º)  1st L.S. Level  (dB)  1st L.S. Position (º) 2  4  >29,2  -21,4  -3,5  -20,4  -4   Plane ϕ=90º  LF 3dB  (º)  LF 10dB  (º)  Isolation (dB)  1st Null Level  (dB)  1st Null Position (º)  1st L.S. Level  (dB)  1st L.S. Position (º) 2  4  >22,8  -21,5  3,5  -20,4  3   Radiation  patterns  of  two  othogonal  planes  (ϕ  =  0º  and  90º)  to  the  plate  of  the parabola. ECP – direct polarization; ECX – cross polarization.  By  default,  the  system  always  measures  and  displays  in  the  graphics,  cross-polarization in red.
                Page 27 Egatel IST. Interactive Satellite Terminal Smart LNB  10.2.2. Horizontal Polarization: Rectangular coordinates Radiation pattern.    Fig.28. Radiation pattern. Copolar and crosspolar. Plane: ϕ=0º.    Fig.29. Radiation pattern. Copolar and crosspolar. Plane. Plane: ϕ=90º.
                Page 28 Egatel IST. Interactive Satellite Terminal Smart LNB  10.2.3. Horizontal Polarization: Radiation pattern “With markes”.    Fig.30. Radiation pattern. Copolar and crosspolar. Plane. Plane: ϕ=0º.    Fig.31. Radiation pattern. Copolar and crosspolar. Plane. Plane: ϕ=90º.
                Page 29 Egatel IST. Interactive Satellite Terminal Smart LNB  10.2.4. Horizontal Polarization:  Polar coordinates radiation pattern.     Fig.32. Radiation pattern. Copolar and crosspolar component. Plane: ϕ=0º.      Fig.33. Radiation pattern. Copolar and crosspolar component. Plane: ϕ=90º.
                Page 30 Egatel IST. Interactive Satellite Terminal Smart LNB  10.2.5. Horizontal Polarization: 3D Radiation pattern.    Fig.34. Radiation pattern. Copolar – Polar component.      Fig.35. Radiation pattern. Copolar.
                Page 31 Egatel IST. Interactive Satellite Terminal Smart LNB  10.2.6. Verticall Polarization: Rectangular coordinates Radiation pattern.    Fig.36. Radiation pattern. Copolar and crosspolar component. Plane: ϕ=0º.      Fig.37. Radiation pattern. Copolar and crosspolar component. Plane: ϕ=90º.
                Page 32 Egatel IST. Interactive Satellite Terminal Smart LNB  10.2.7. Verticall Polarization: Radiation pattern “With markes”.   Fig.38. Radiation pattern. Copolar and crosspolar component. Plane: ϕ=0º.    Fig.39. Radiation pattern. Copolar and crosspolar component. Plane: ϕ=90º.
                Page 33 Egatel IST. Interactive Satellite Terminal Smart LNB  10.2.8. Verticall Polarization:  Polar coordinates radiation pattern.     Fig.40. Radiation pattern. Copolar and crosspolar component. Plane: ϕ=0º.     Fig.41. Radiation pattern. Copolar and crosspolar component. Plane: ϕ=90º.
                Page 34 Egatel IST. Interactive Satellite Terminal Smart LNB  10.2.9. Vertical Polarization: 3D Radiation pattern.    Fig.42. Radiation pattern. Copolar – Polar component.       Fig.43. Radiation pattern. Copolar
                Page 35 Egatel IST. Interactive Satellite Terminal Smart LNB  10.3.  Detailed diagram of the components supplied with the antenna.   Fig.44. Antenna components.
                              Egatel IST. Interactive Satellite Terminal Smart LNB                          EGATEL S.L. Web: www.egatel.es  e-mail: egatel@egatel.es     SEDE CENTRAL  VENTAS INTERNACIONALES Edificio Egatel  C/ Julián Camarillo, 6A - 2ª  Av. Ourense, 1  28037 Madrid Parque Tecnolóxico de Galicia   Tlf: +34 91 788 5070 32901 Ourense  Fax: +34 91 563 5519 Tlf.: +34 988 368 118      Fax: +34 988 368 119  EGATEL FINLAND   EGATEL ARGENTINA Vättilänkatu, 4   Avda. Santa Fe 1845, Piso 4, Of. B 20708 – Kaarina   1123 Buenos Aires Capital Federal Turku – Finlandia   Teléfono / Fax: +54 114 816 25 22  Teléfono: +358 (0) 2 2408444     EGATEL CHILE   EGATEL MEXICO Avda. Presidente Riesco. 5335 – 9ª Planta  Av. Insurgentes Sur 813, Piso 10 Santiago de Chile  Col. Nápoles, México 03810, D.F. Teléfono: + 5627143823  Teléfono: +52 55 5536 7178

Navigation menu