ELITEGROUP COMPUTER SYSTEMS GWS-CSCGTAG Logistic Monitoring Tag User Manual GWS CSCG Tag 180321 pmd

ELITEGROUP COMPUTER SYSTEMS CO., LTD Logistic Monitoring Tag GWS CSCG Tag 180321 pmd

Users Manual

GWS-CSCG TagHARDWAREUSER MANUALLogistics Monitoring Tag
1Federal Communications Commission (FCC)This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses, and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:• Reorient or relocate the receiving antenna• Increase the separation between the equipment and the receiver• Connect the equipment onto an outlet on a circuit different from that towhich the receiver is connected• Consult the dealer or an experienced radio technician for helpShielded interconnect cables and a shielded AC power cable must be employed withthis equipment to ensure compliance with the pertinent RF emission limitsgoverning this device. Changes or modifications not expressly approved by thesystem’s manufacturer could void the user’s authority to operate the equipment.FCC Label Compliance StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the follow-ing two conditions:(1) This device may not cause harmful interference(2) This device must accept any interference received, including interference thatmay cause undersired opreationRF Exposure WarningThis equipment must be installed and operated in accordance with providedinstructions and the antenna(s) used for this transmitter must be installed to providea separation distance of at least 20 cm from all persons and must not be co-locatedor operating in conjunction with any other antenna or transmitter. End-users andinstallers must be provide with antenna installation instructions and transmitteroperating conditions for satisfying RF exposure compliance.
2Canada, Industry Canada (IC) NoticesThis device complies with Industry Canada’s licence-exempt RSSs. Operation issubject to the following two conditions:(1) This device may not cause interference; and(2) This device must accept any interference, including interference that may causeundesired operation of the device.Radio Frequency (RF) Exposure InformationInformations concernant l’exposition aux fréquences radio(RF)La puissance de sortie émise par l’appareil de sans fil est inférieure à la limited’exposition aux fréquences radio d’Industry Canada (IC). Utilisez l’appareil desans fil de façon à minimiser les contacts humains lors du fonctionnement normal.Ce périphérique a également été évalué et démontré conforme aux limitesd’exposition aux RF d’IC dans des conditions d’exposition à des appareils mobiles(antennes sont supérieures à 20 cm à partir du corps d’une personne).The radiated output power of the Wireless Device is below the Industry Canada (IC)radio frequency exposure limits. The Wireless Device should be used in such amanner such that the potential for human contact during normal operation isminimized.This device has also been evaluated and shown compliant with the IC RF Exposurelimits under mobile exposure conditions. (antennas are greater than 20cm from aperson’s body).Canada, avis d’Industry Canada (IC)Le présent appareil est conforme aux CNR d’Industrie Canada applicables auxappareils radio exempts de licence. L’exploitation est autorisée aux deuxconditions suivantes :(1) l’appareil ne doit pas produire de brouillage, et(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,même si le brouillage est susceptible d’en compromettre le fonctionnement.
3• If you encounter the following technical problems with the product,unplug the power cord and contact a qualified service technician or yourretailer.Attention during use• The power cord or plug is damaged.• Liquid has been spilled into the system.• The system does not function properly even if you follow the operat-ing instructions.• The system was dropped or the cabinet is damaged.• The system performance changesThe warranty does not apply to products that have been disassembled by users.Safety Notice and warningsIMPORTANT:In the European Union, this symbol indicates that this product includingbattery must not be disposed of with household waste. It is your responsibilityto hand it over to a designated collection point for the recycling of wasteelectrical and electronic equipment. For more information, please contact yourlocal waste collection center or the point of purchase of this product.CAUTION:Risk of explosion if battery is replaced by an incorrect type.Dispose of used batteries according to the instructions.Product disposal notice• Read and follow all instructions in the documentation before you operateyour system.• Do not use this product near water or a heated source such as a radiator.• Set up the system on a stable surface.• Openings on the chassis are for ventilation. Do not block or cover theseopenings. Make sure you leave plenty of space around the system forventilation. Never insert objects of any kind into the ventilation openings.• If you use an extension cord, make sure that the total ampere rating of thedevices plugged into the extension cord does not exceed its ampererating.Safety InstructionYour system is designed and tested to meet the latest standards of safety forinformation technology equipment. However, to ensure your safety, it is importantthat you read the following safety instructions.Setting up your system
4Nordic Lithium Safety Notice (for lithium-ion batteries)Safety Notice:Danger of explosoin if battery is incorrectly replace only with the same orequivalent type recommended by the manufacturer. Dispose of used batteriesaccording to the manufacturer’s instructions.Attetion during use1. Do not place this product underneath heavy loads or in an unstable position.2. Do not use or expose this product around magnetic fields as magneticinterference may affect the performance of the product.3. Do not storage this product to high levels of direct sunlight, high-humidity orwet conditions.4. Do not carry the product on the body (or pockets).CE markingFCC marking
5Brief IntroductionSpecificationsItemMCULEDNFC < 4 cmZigbee 30 mBattery TypeOperati ng TemperatureDimension (W x L x H)IP LevelTelink 8269f512 ET323 Color LED (RGB)Spec DescriptionTemp/Humi di tyAmbi ent Li ghtG-Sens orSensorsConnectivityGR2450-20~60℃76* 70 *11 (mm)IP54
6Tag exterior overview
7How to use GWS-CSCGStep 1: Power On/Off1. Power On - Press button three times. On third press user must hold button down for20 seconds.If successful: Power icon on reflecting battery charge status on display, green LEDpattern and positive audio chime.If unsuccessful: Power icon reflecting insufficient battery on display, red LED lightpattern and negative audio chime.2. Power Off - Press button three times. On third press user must hold button down for20 seconds.If successful: Power icon on reflecting battery charge status on UI, green LED patternand positive audio chime.If unsuccessful: Power icon will be reflected on UI, red LED light pattern and negativeaudio chime.User will not be able to power down device if the shipment is still active.
8Step 2: NFC Tag PairingTap powered on Gateway to Tag and press the NFC button to pair the Tag to theGateway.
9Step 3: Load shipmentWhen loading pallets with Tags and Gateways onto a truck, try to place one pallet inthe back of the truck, one pallet in the center of the truck and one pallet with theGateway right by the door. Make sure that the Gateway faces the truck door, and is asclose to the door as possible to ensure the Gateway signal can best maintain cellconnectivity.
10How to Power On TagHow to Attach Tag to CargoBy pulling the battery strip awayfrom the Tag, the tag will bepower-on with LED light blink.By apply screws through the 2mounting holes on the corner oftag, it can be secure to anywooden crate or box fortransportation.Via Screws:Via Self-tape:By peeling off the back film andattache the tag to the side ofshipping carton.
GWS-CSCG TagLogistics Monitoring Tag

Navigation menu