ELITEGROUP COMPUTER SYSTEMS GWS-CSCGTAG Logistic Monitoring Tag User Manual GWS CSCG Tag 180321 pmd

Download:
Mirror Download [FCC.gov]
Document ID	3791336
Application ID	G0auIVPnaN11E1JjOA0pfA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	412.68kB (5158523 bits)
Date Submitted	2018-03-22 00:00:00
Date Available	2018-06-22 00:00:00
Creation Date	2018-03-21 16:43:42
Producing Software	Acrobat Distiller 10.0.0 (Windows)
Document Lastmod	2018-03-21 17:29:49
Document Title	GWS-CSCG Tag 180321.pmd
Document Creator	PageMaker 7.0
Document Author:	fionachen

HARDWARE
USER MANUAL
GWS-CSCG Tag
Logistics Monitoring Tag
Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and the receiver
•
Connect the equipment onto an outlet on a circuit different from that to
which the receiver is connected
•
Consult the dealer or an experienced radio technician for help
Shielded interconnect cables and a shielded AC power cable must be employed with
this equipment to ensure compliance with the pertinent RF emission limits
governing this device. Changes or modifications not expressly approved by the
system’s manufacturer could void the user’s authority to operate the equipment.
FCC Label Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that
may cause undersired opreation
RF Exposure Warning
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to provide
a separation distance of at least 20 cm from all persons and must not be co-located
or operating in conjunction with any other antenna or transmitter. End-users and
installers must be provide with antenna installation instructions and transmitter
operating conditions for satisfying RF exposure compliance.
Canada, Industry Canada (IC) Notices
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Canada, avis d’Industry Canada (IC)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry Canada (IC)
radio frequency exposure limits. The Wireless Device should be used in such a
manner such that the potential for human contact during normal operation is
minimized.
This device has also been evaluated and shown compliant with the IC RF Exposure
limits under mobile exposure conditions. (antennas are greater than 20cm from a
person’s body).
Informations concernant l’exposition aux fréquences radio
(RF)
La puissance de sortie émise par l’appareil de sans fil est inférieure à la limite
d’exposition aux fréquences radio d’Industry Canada (IC). Utilisez l’appareil de
sans fil de façon à minimiser les contacts humains lors du fonctionnement normal.
Ce périphérique a également été évalué et démontré conforme aux limites
d’exposition aux RF d’IC dans des conditions d’exposition à des appareils mobiles
(antennes sont supérieures à 20 cm à partir du corps d’une personne).
Safety Instruction
Your system is designed and tested to meet the latest standards of safety for
information technology equipment. However, to ensure your safety, it is important
that you read the following safety instructions.
Setting up your system
•
•
•
•
•
Read and follow all instructions in the documentation before you operate
your system.
Do not use this product near water or a heated source such as a radiator.
Set up the system on a stable surface.
Openings on the chassis are for ventilation. Do not block or cover these
openings. Make sure you leave plenty of space around the system for
ventilation. Never insert objects of any kind into the ventilation openings.
If you use an extension cord, make sure that the total ampere rating of the
devices plugged into the extension cord does not exceed its ampere
rating.
Attention during use
•
If you encounter the following technical problems with the product,
unplug the power cord and contact a qualified service technician or your
retailer.
•
The power cord or plug is damaged.
•
Liquid has been spilled into the system.
•
The system does not function properly even if you follow theoperating instructions.
•
The system was dropped or the cabinet is damaged.
•
The system performance changes
The warranty does not apply to products that have been disassembled by users.
Safety Notice and warnings
Product disposal notice
IMPORTANT:
In the European Union, this symbol indicates that this product including
battery must not be disposed of with household waste. It is your responsibility
to hand it over to a designated collection point for the recycling of waste
electrical and electronic equipment. For more information, please contact your
local waste collection center or the point of purchase of this product.
CAUTION:
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Nordic Lithium Safety Notice (for lithium-ion batteries)
Safety Notice:
Danger of explosoin if battery is incorrectly replace only with the same or
equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
Attetion during use
1. Do not place this product underneath heavy loads or in an unstable position.
2. Do not use or expose this product around magnetic fields as magnetic
interference may affect the performance of the product.
3. Do not storage this product to high levels of direct sunlight, high-humidity or
wet conditions.
4. Do not carry the product on the body (or pockets).
 CE marking
 FCC marking
Brief Introduction
Specifications
MCU
Spec Description
Telink 8269f512 ET32
LED
3 Color LED (RGB)
Item
Connectivity
NFC
Zigbee
< 4 cm
30 m
Temp/Humidity
Sensors
Ambient Light
G-Sensor
Battery Type
GR2450
Operating Temperature -20~60 ℃
Dimension (W x L x H)
76* 70 *11 (mm)
IP Level
IP54
Tag exterior overview
How to use GWS-CSCG
Step 1: Power On/Off
1. Power On - Press button three times. On third press user must hold button down for
20 seconds.
If successful: Power icon on reflecting battery charge status on display, green LED
pattern and positive audio chime.
If unsuccessful: Power icon reflecting insufficient battery on display, red LED light
pattern and negative audio chime.
2. Power Off - Press button three times. On third press user must hold button down for
20 seconds.
User will not be able to power down device if the shipment is still active.
If successful: Power icon on reflecting battery charge status on UI, green LED pattern
and positive audio chime.
If unsuccessful: Power icon will be reflected on UI, red LED light pattern and negative
audio chime.
Step 2: NFC Tag Pairing
Tap powered on Gateway to Tag and press the NFC button to pair the Tag to the
Gateway.
Step 3: Load shipment
When loading pallets with Tags and Gateways onto a truck, try to place one pallet in
the back of the truck, one pallet in the center of the truck and one pallet with the
Gateway right by the door. Make sure that the Gateway faces the truck door, and is as
close to the door as possible to ensure the Gateway signal can best maintain cell
connectivity.
How to Power On Tag
By pulling the battery strip away
from the Tag, the tag will be
power-on with LED light blink.
How to Attach Tag to Cargo
Via Screws:
By apply screws through the 2
mounting holes on the corner of
tag, it can be secure to any
wooden crate or box for
transportation.
Via Self-tape:
By peeling off the back film and
attache the tag to the side of
shipping carton.
10
GWS-CSCG Tag
Logistics Monitoring Tag

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : PageMaker 7.0
Modify Date                     : 2018:03:21 17:29:49+08:00
Create Date                     : 2018:03:21 16:43:42+08:00
Metadata Date                   : 2018:03:21 17:29:49+08:00
Format                          : application/pdf
Title                           : GWS-CSCG Tag 180321.pmd
Creator                         : fionachen
Producer                        : Acrobat Distiller 10.0.0 (Windows)
Document ID                     : uuid:ce25796f-3dcc-474c-bf39-e67456786385
Instance ID                     : uuid:c7617d3a-2804-452c-a401-b949f4a99674
Page Count                      : 12
Author                          : fionachen

EXIF Metadata provided by EXIF.tools