ETI Solid State Lighting 5540312018 LED Horticultural Luminaire User Manual
Elec-Tech International Co., Ltd. LED Horticultural Luminaire Users Manual
User Manual
Elec-Tech International Co., Ltd. Product Instruction Manual 500W Product Name: LED Grow Light Model No.: 55403161 Manufacturer: Elec-Tech International Co., Ltd. Address: No.1 Jinfeng Road, Tangjiawan Town, Xiangzhou Dist, Zhuhai City, Guangdong Province, China Tel:0756-3390990 Fax:0756-3390778 Web:www.etissl.com.cn Content 1. ProductIntroduction‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐3 1.1 ProductDescription ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐3 1.2 SchematicDiagram‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐3 2. ProductFeature‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐2 2.1 Productcharacteristic ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐2 2.2 Specification‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐3 2.3 LightDistribution‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐4 3. Methodofapplication‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐4‐7 4. Function keys Instruction‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐7 5. Controler pairing instruction‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐8‐10 6. MaintenanceInstruction‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐10 7. Environmentalrequirement‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐11 8. Productcarriedstandard‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐11 9. Packageinstruction ‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐11 1. Product Introduction 1.1. Product Description Out Size: 700x350x138mm; Frame:AL+ABS , Drive box:SPCC Powderspray, lamp cover:Tempered glass built‐in drive drive box Radiating Systim:AL+Air fan Samsung‐LED‐2835;OSRAM‐LED‐3030‐Red;OSRAM‐LED‐3030‐Blue 1.2.Product schematic diagram: 2. Product Featuers: 2.1. Product characteristics : ٛ ٛ a. Long lifetime (above 50,000hrs) ; b. High efficiency, energy saving, ٛ c. Promote the growth and development of plants, increase the production and income of agricultural industry, and advance the time of agricultural products market; It is suitable for planting fields such as planting and lighting in agricultural greenhouses, artificial solar light source in plant factories, etc. 2.2 Specification Item/ Parameter Electronicratings WRatedPower/W 500W VRatedInputvoltage/V AC120‐277V HzFrequency/Hz 60Hz %RatedPowerefficiency 85% (PF)RatedPowerFactor 0.95 ARatedInputcurrent/A 4.15A RatedI‐THD <20% Photometricratings LEDtype/Qty. /PPF Samsung‐2835/1W/280PCS Osram‐3030‐R/3W/84PCS Osram‐3030‐B/3W/60PCS 800 umol/s Red/Blue/5000K BeamAngle ≥100 Physicalinformation Material PC+SPCC+AL operatingtemperature ‐0~45℃ storagetemperature ‐10~50℃ IPrating IP20 (L×W×H)/mmLuminairedimension(L×W×H)/mm 700x350x138 gNetweight 13980 g hrsLifetime/hrs 50000h 3 Installation Instructions Hanging Mount 3.1Attached two rope hangers to the ceiling or the structure that can support the weight of grow light plus some extra for power cords and rope hanger,etc. 3.2 Place the provided V type hook over the hook of each rope hanger.Ensure both end of rope hanger are secure. 3.3 Hold the fixture body by hands, and hang the fixture body by placing one V type hook over each hole on both side of the fixture, adjust the rope hanger to level light. Insert one end of the provided power cord into to back of the fixture, and plug the other end of power cord into an electrical outlet. Press the “NO” button to activate the fixture. 3.4 4. Operation Instruction for Control Panel Button and Knob on The Fixture 4.1. (Power Switch, “I /O”button, “I”represents power on , “O” represents power off) 4.2. (Spectrum Switch, “I /O/II”button, “I”represents full spectrum, “O”represents “Flower” spectrum, “II”represents “Veg”spectrum) 4.3.( Timer knob, spin the knob pointing to the desired position, then it starts the timer: “OFF”represents timer is off; “2Hs”represents light will be off in 2 hours; “4Hs” represents light will be off in 4 hours; “6Hs” represents light will be off in 6 hours; “8Hs” represents light will be off in 8 hours.) 5. (Guideline to remote controller) (ON/OFF Button: When light is on press this button, the light will be off; when light is off press ON/OFF button the light will be on.) ( Select ALL button: Press this button, all the light will be on.) (Press Red- button, red light reduces.) (Press Red+ button, red light increases.) (Press Blue‐ button, blue light reduces.) (Press Blue+ button, blue light increases.) (Press White‐ button, white‐ light reduces.) (Press White+ button, white+ light increases.) (Previous represents select the previous light.) (Next represents select the next light.) (Group1: When a grow light is selected, within 5 seconds press this button in short time, this grow light will be added to group1. The light flash indicates the grow light is added successfully.) (Group2: When a grow light is selected, within 5 seconds press this button in short time, this grow light will be added to group2. The light flash indicates the grow light is added successfully.) (Group3: When a grow light is selected, within 5 seconds press this button in short time, this grow light will be added to group3. The light flash indicates the grow light is added successfully.) (Group4: When a grow light is selected, within 5 seconds press this button in short time, this grow light will be added to group4. The light flash indicates the grow light is added successfully.) ( Pair the grow light to remote controller: Press Paring button when the fixture is power on in 60s, the grow light will flash to indicate the fixture is connected.) (Delete button: delete the connection with grow light. When grow light is connected, press this button, the remote controller disconnect with the fixture.) ( My favor1: Save the current color combination by pressing this button for long time about 4s; display the saved color combination by pressing this button in short time.) ( My favor2: Save the current color combination by pressing this button for long time about 4s; display the saved color combination by pressing this button in short time.) ( My favor3: Save the current color combination by pressing this button for long time about 4s; display the saved color combination by pressing this button in short time.) ( My favor4: Save the current color combination by pressing this button for long time about 4s; display the saved color combination by pressing this button in short time.) ( Grow Mode: Switch the grow mode: Flower, Veg, Full spec, White. Press the button in short time one grow mode will switch.) (Timer: Press the button in short time lighting time will switch: 0h, 2h,4h,6h,8h, total five kind of light time. When lighting time is over, the light goes off, and the light on/off cycle is 24 hours.) (Pair the grow light to remote controller: When the fixture is power on within 60s, switch to “remote control” mode , press Paring button, the grow light will flash to indicate the fixture is connected. Grow light is controlled by pressing the -/+ and on/off buttons on the remote controller. The light changes to indicate the grow light is controlled successfully.) (Delete connection: Select the grow light which is needed to be deleted by pressing Previous/Next Button, within 5 seconds, press Delete button, the light flash three times represents disconnection is successful. Once the selected grow light is deleted, this grow light will not be controlled any more.) ( Group Set Up: Select the grow light which is needed to be deleted by pressing Previous/Next Button, within 5 seconds, press any one of the buttons Group1, Group2,Group3, Group4, then the selected grow light will be group into the related group.) (Group Controll: Press any one of the buttons Group1, Group2,Group3, Group4 or ALL button, then press +/-、 ON/OFF button, the group of grow lights can be controllerd. The light changes to indicate the grow light is controlled successfully.) (Notice: Above operation is based on “remote control” mode. The grow light can be controller when it is in “remote control” mode. When timer points “OFF” mode, the timer on the remote controller can be set up.) 6. Maintenance instruction 6.1 Do Not use volatile solvent such as alcohol to clean the troffer. 6.2 Use soft cotton cloth with suds to clean the troffer . 6.3 Non-profecssional Do not attempt to take apart and repair the troffer . 6.4 Please use the constant-current driver exclusively adaptive to the troffer, do not change the driver without permission . 7. Environment requirement Operating temperature :-10~40℃;Storage temperature :-20~50℃。 8. Product carried standard UL-1598/UL8750 9. Package Instruction 9.1 Packing Specification 9.2 Package list Package size Lamp Qty./box Net weight Gross weight Item Grow lamp Instruction manual Pothook Power Line 1 PCS 13.98 Kgs 14.5 Kgs Qty. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital, pursuant to Part 15 or the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may casue harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --- Reorient or relocate the receiving antenna. --- Increase the separation between the equipment and receiver. --- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --- Consult the dealer or an experienced radio/ TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Administrator Create Date : 2018:08:15 17:49:19+08:00 Modify Date : 2018:08:15 17:49:19+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Title : <4D6963726F736F667420576F7264202D2035353430333136312035303057D6B2CEEFB5C6B2FAC6B7CBB5C3F7CAE92DD6D0D3A2CEC42E646F6378> Creator : Administrator Creator Tool : PScript5.dll Version 5.2.2 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:97bb15b1-f1ef-471f-9179-f579ab54e069 Instance ID : uuid:9c0c33dd-a96e-48d0-8d49-9e6203da9a77 Page Count : 12EXIF Metadata provided by EXIF.tools