EU3C SCND502E1233 FILMSCAN35 MODERN BASIC User Manual ITNS 400 UM EN for OV5620 FAQ

Download:
Mirror Download [FCC.gov]
Document ID	1301256
Application ID	vRZ71EANQxsAt2jN8IYALQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	387.26kB (4840731 bits)
Date Submitted	2010-06-24 00:00:00
Date Available	2010-06-24 00:00:00
Creation Date	2010-05-18 20:47:59
Producing Software	Acrobat Distiller 9.3.2 (Windows)
Document Lastmod	2010-05-18 20:47:59
Document Title	ITNS-400_UM_EN_for OV5620_FAQ...
Document Creator	PScript5.dll Version 5.2.2
Document Author:	ThomasYi

innovative technology
ITNS-400
User Manual
I. Unpack the ITNS-400
User Manual
ITNS-400
Quick Installation Guide
Note
This film scanner supports Windows XP, Vista/Windows7 (32/64bits) via USB 2.0
only.
We strongly suggest using a clean, dry, non-alcohol cotton swab to insert into the
film scanner slot and clean the glass surface periodically to produce a clear image.
Make sure all negative films, slide films, and cover trays are free of dust and dirt
before inserting into the ITNS-400 as this may affect the image quality when
scanning.
When cleaning films, please use a professionally recommended purger from a
photo store to avoid damaging old or precious films.
-1-
II. Driver Installation
To use the ITNS-400, please complete the following installation in advance.
1. Turn on the computer
2. Insert the installation CD into the CD-ROM drive and the installation CD
menu will appear.
3. Choose Installation.
-2-
4. Follow the on-screen instructions. (Windows XP, Vista/Windows7)
-3-
-4-
-5-
-6-
5. After completing software installation, please connect ITNS-400 to PC. The
New Hardware Wizard will detect a new device.
-7-
6. Select “Yes” in XP or “Locate and install driver software (recommended)” in
Vista/Windows7 OS.
-8-
7. After completing the installation, the filmscanner is ready to start with
“35mm FilmScanner” Image Scan Tool under program files. (Windows XP,
Vista/Windows7) Restart is not required, but it is recommended to restart
your PC after installation/un-installation.
III. Using the ITNS-400
Copy button
Power status LED
USB Cable
Film Slot
-9-
Installing film into the film holder
Install slide Film into the holder entitled “Slides Only”
1. Open the slide holder as illustrated
2. Place slide in recessed slot in holder
3. Close the film holder
Install Negative Film into the holder entitled “Negative Film Only”:
1. Open the film holder as illustrated
2. Install film into negative film slot
3. Close the film holder
-10-
Note
To avoid a mirror image, follow the serial numbers (from left to right) on
top of film when installing negative film into holder.
Figure 1
If the image is upside down [see fig.2], the image can be corrected by
“Rotate” function in Image Scan Tool after capture [see fig.3].
Figure 2
Figure 3
-11-
How to use ITNS-400
1. Put Film into film holder
2. Insert the film holder into the right side of the ITNS-400 unit
-12-
3. Connect ITNS-400 to PC
4. Click “Image Scan Tool” to enter operation interface as below
-13-
5. Press “Copy” button to capture the image
6. Process necessary modification by function buttons in right hand side
-14-
7. Save captured images to PC
8. Get fimal images from PC for further review and edit
-15-
User interface introduction
When user selects a “Negative” source, the image in “Live View” window will
be exactly like the processed result.
-16-
If device processes a slide, the “Live View” will show a color image and the
FilmType will remain the same.
This is the live view under black and white negative option.
-17-
User can convert images from traditional film to digital either by “Snap Shot”
button in Image Scan Tool or the button on top of filmscanner. Then, the
capture result will appear in the “Snap Shot” and “Final images to save”
window.
Touch button
All of the effects in Image Scan Tool will be ready for instant preview in “Snap
Shot” and “Final images to save” window.
-18-
Apply the Mirror function by pressing the “Mirror” icon, that will flip the
image and be shown in the “Snap Shot” window as well as the “Final images
to Save”.
Or apply the Rotate function by pressing “Rotate” button, the image will be
rotated 90 degrees each time. Images can be continuously rotated a full 360
degrees or until desired.
-19-
If the user wishes to delete a specific image from the capture pool, simply
click the image under “Final image to save” again, then the selected image
can be deleted by applying the “Delete” button.
After modification, user can save images to the default location at
“C:\Documents and Settings\Users\My Documents\My Pictures”.
-20-
Or define preferable location for saving captures images by pressing the
directory button. Another window will pop out for user to select required
location.
Once press “Save” key, all of captures images will be saved into defined
location. The “final image” saving window shall be empty after press the
“Save” button.
-21-
When the capture is complete, the user can press “Exit” button to quit this
Image Scan Tool, Then, review captured images or process more fancy
modification with bundle software for PC.
-22-
IV. Specification
Image Sensor:
Lens:
5 mega CMOS sensor
F no.=2.0, 4 Glass elements,
Focus Range:
Exposure Control:
Color Balance
Scan Quality
Data Conversion
Scan Method
Light Source
Interface:
Power:
Dimensions
Fixed focus
Automatic
Automatic
1,800 dpi /3600 dpi (SW interpolation)
10 bits per color channel
Single pass
Back light (3 white LEDs)
USB 2.0
USB port
W100.6 x L90.5 x H150.3mm
Weight
Operating Systems
0.39kg
Windows XP/Vista/Windows 7
-23-
V. Cleaning the ITNS-400
Please remove the film holder from device when you notice any dust in the
live view window.
Then you can use the cleaning brush to wipe away dust.
Note
We strongly suggest using a clean, dry, non-alcohol cotton swab to clean
the glass surface periodically to produce a clear image during operation.
-24-
ITNS-400 Trouble shooting
Question 1. How to install ITNS‐400 driver?
：
Solution：
01. Put FilmScan Driver CD‐ROM into your CD player.
02. Open the X(CD‐ROM):\Driver\folder.
03. Click mouse right buttonon setup.exe, and click “Run as administrator”
to install driver.
04.The InstallShield Wizard will show the message of “InstallShield Wizard
Completed once the driver installed ready.
05.Connect ITNS-400 to your PC, the PC will complete the device driver
installation and confirm driver installed successfully.
-25-
Question 2. Came up the error message “Cannot Install This Hardware” or
“ Can not find camera. Please connect your manufacturer” or “Acquire
Source Failed…Restart DSM”
-26-
Solution：
01.Check your USB cable to make sure it is well connected to your PC and
your device.
02.Check your PC to verify the driver is installed properly.
03. Uninstall the existing driver from your system.
a. Using the uninstall program of ITNS‐400 application
Run start→All programs (Vista/Win7) or Program files (XP)→35mm film
scanner→35mm film scanner →Uninstall 35mm Film Scanner
b. or Using the tool in device manager
(1) Open Device Manager.
Windows XP
Open Start→Setting→Control Panel→System→Hardware→Device
Manager
-27-
Windows Vista
Open Start →Control Panel→System →Device Manager
Wondows 7
Open Start → Control Panel → System and Security → System → Device
Manager
(2) Click the right button of mouse from “Unknown device” and uninstall the
driver.
04. Re‐install proper driver version again.
-28-
Question 3. If you can’t uninstall the driver or came up the error
message “ Can’t find the device, you may plug‐in the device and try
again.” or “Failed to uninstall the device. The device may be required to
boot up the computer.”
Solution：
Please refer to Question 2 solution and reboot your computer, if it still
can’t work, please
contact
us
through
e-mail
support@ithomeproducts.com
Question 4. Run the ITNS‐400 application and come up the error
message “Fail to get image data”
OK
Solution：
Close the application then re‐start the ITNS‐400 application again.
-29-
Question 5. You can’ t see the pre‐view image from ITNS‐400 application
when you have re‐installed driver and device status is completed.
Reason: Devices confliction. (Such as USB cameras or devices.)
-30-
Solution：
01. Disable the other imaging devices by using bundled program in standard
package first or disable it by the option under Imaging device when press
right button of mouse.
02. Re‐start ITNS‐400 application again.
Question 6. Come up the error message “General failure in transfer bad info
header info. Bad value error”.
OK
Reason: Plug device into USB1.1 port.
Solution：
ITNS‐400 only supports USB 2.0. Please verify if your PC is compatible with
USB2.0.
-31-
01 Open Device Manager.
Windows XP
Open Start →Setting→Control Panel→System→Hardware→Device Manager
Windows Vista
Open Start→Control Panel→System→Device Manager
Windows 7
Open Start→Control Panel→System and Security→System→Device Manager
02 Your computer must with a USB 2.0 Controller in Universal Serial Bus
controllers. The figure below shows the difference between USB1.1 and 2.0.
There must be a “USB2” for USB 2.0 controller.
-32-
InnovativeTechnologyElectronicsCorp.
LimitedWarranty
90DaysLabor, OneYearParts
Innovative Technology Electronics Corp. (IT) warrants the product to be free from “ Defects” in
materials under normal use for a period of “ One Year”fom the date of the orginal purchase. The
Warrantyis “Not”transferable. ITagrees, withintheinitial “90Day”period, torepairtheproductif
itisdeterminedtobedefectiveat “NoCharge”. ItisfurtheragreedthatITwillcoverthecosttorepairor
replace damaged “Parts”only for a totalperiod of “One Year”from the dateof the original purchase.
The warranty does not covercosmetic damage, antennas, AC cords, cabinets, headbands, ear-pads,
or damage due to line power surges, connection to improper voltage supply or settings, misuse,
mishandling, accident, actsofGodorattemptedrepairbyanunauthorizedserviceagent.
To abtain service, the original purchaser MUST present a sales receipt/proof ofpurchaseindicating date
of purchase, amount paid, and place of purchase. Send the unit prepaid to the address below in the
original packaging or reasonablesubstitute to prevent damage. You “ MUST”include your full name,
shippingaddressandtelephonenumber. NoreturnwillbeshippedbacktoaPOBox. Pleaseincludeyour
check or money order in the amount of $12.00, payable to Innovative Technology Electronics Corp. to
coverhandlingandreturnshippingcharges.(IT) willnotberesponsiblefordelaysorunprocessedclaims
resultingfromapurchaser’sfailuretoprovideanyorallofthenecessaryinformation.
Sendallinquiresorreturnsto:
CustomerServiceDept.
InnovativeTechnologyElectronicsCorp.
4Anchorway, PortWashington, NY11050
Tel : 1-877-ITECH-97 (1-877-483-2497)
Website : www.ithomeproducts.com
EMAIL : support@ithomeproducts.com
There are no express warranties except as listed above
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CUSTOMER, (IT) SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or
limitationsonhowlonganimpliedwarrantylasts, sotheaboveexclusionsorlimitationsmaynotapplyto
you. This warranty gives you specific legal rights and you may also have other rights, which vary from
statetostate.
Instructions shall caution users that modifications not approved by the party responsible
for compliance could void user's authority to operate the equipment.
The following or equivalent as appropriate:
“NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.”
Statement that the product complies with Part 15 (i.e. “This device complies with Part 15
of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.”)
CALIFORNIA PROP 65 WARNING
WARNING : This product contains chemicals known to the State of California to cause
birth defects or other reproductive harm. For more information on these regulations and
a list of chemicals, log on the following website address:
http://www.oehha.ca.gov/prop65.html
Driver Revision: 1.0_1

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Title                           : ITNS-400_UM_EN_for OV5620_FAQ...
Creator                         : ThomasYi
Create Date                     : 2010:05:18 20:47:59+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2010:05:18 20:47:59+08:00
Producer                        : Acrobat Distiller 9.3.2 (Windows)
Document ID                     : uuid:b2110f83-d80b-41d1-8d8d-d4dfb5133273
Instance ID                     : uuid:baa1305c-41eb-4ddd-ba32-9e9c4f5b60d9
Page Count                      : 36
Author                          : ThomasYi

EXIF Metadata provided by EXIF.tools