User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3244187 |
| Application ID | pqRhvFFlNUwAv5TvbDIIPA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 85.82kB (1072740 bits) |
| Date Submitted | 2016-12-30 00:00:00 |
| Date Available | 2016-12-30 00:00:00 |
| Creation Date | 2016-12-29 17:00:14 |
| Producing Software | doPDF Ver 7.3 Build 387 (Windows 7 Home Premium Edition (SP 1) - Version: 6.1.7601 (x64)) |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | User Manual |
BT-MSOII Manual Revision 1.2 – 2016/10/25 CONFIDENTIAL INFORMATION Everint Co., Ltd.. List of Contents 1. General .......................................................................................................... 3 1.1 Overview ................................................................................................................................. 3 1.2 Features................................................................................................................................... 4 1.3 Application .............................................................................................................................. 4 1.4 Pin Configuration ..................................................................................................................... 5 1.5 Device Terminal Functions ....................................................................................................... 6 1.6 Package Dimensions & Land Pattern ........................................................................................ 7 2. Characteristics ............................................................................................... 9 2.1 Electrical Characteristics .......................................................................................................... 9 2.2 RF Characteristics................................................................................................................... 10 2.3 Antenna Characteristics ......................................................................................................... 11 3. Terminal Description ................................................................................... 12 3.1 UART Interface....................................................................................................................... 12 3.2 SPI Interface (Debug only) ...................................................................................................... 12 3.3 I2C Interface .......................................................................................................................... 12 4. Reset, RST# .................................................................................................. 13 1. General 1.1 Overview This specification covers Bluetooth module which complies with Bluetooth specification version 4.1 and integrates RF & Baseband controller in small package. This Module has deployed CSR’s CSRB5341 chipset. All detailed specification including pin outs and electrical specification may be changed without notice. 1.2 Features ■ Bluetooth® v4.1 specification compliant ■ Radio includes integrated balun and typical RF performance of 6 dBm transmit power and -87 dBm receive sensitivity ■ 80 MHz RISC MCU ■ Programmable DSP with 4K x 32-bit program ■ Serial interfaces: UART , I²C and SPI (debug only) ■ 4 general purpose PIOs. ■ Integrated to 16Mbit external Flash memory ■ Power‑on‑reset detects low supply voltage ■ Competitive Size BT-MSOII : 28mm x 18mm x 2.8mm : 44Pin ■ Operating temperature range (MAX -20℃ ~ 70℃) 1.3 Application ■ Mobile Printer ■ POS system 1.4 Pin Configuration 44 GND 43 GND 42 NC NC GND 38 NC NC 37 GND nRESET 36 DEBUG_SPI_CS# BT_STATUS 35 DEBUG_SPI_MISO NC 34 GND NC 33 DEBUG_SPI_SEL NC 10 32 DEBUG_SPI_MOSI 3.3V 11 31 DEBUG_SPI_CLK 3.3V 12 30 NC GND 13 29 APPLE_SDA GND 14 28 APPLE_SCL 15 27 GND GND 16 17 18 19 20 21 22 23 24 25 26 NC 39 BT_DUT NC GND AT_CMD GND RTS_CTL 40 NC NC GND RXD GND nCTS 41 TXD NC GND Pin Configuration (TOP VIEW) 1.5 Device Terminal Functions Function PIO I2C Interface SPI Interface UART Interface Other Pins Pin Name Pin No. PIO[13] BT_DUT 25 PIO[14] BT_STATUS PIO[15] AT_CMD 23 PIO[16] RTS_CTL 22 SDA APPLE_SDA 29 Pin type Description Note BT DUT Bideirection, Weak Pull Down BT_STATUS AT Command RTS Control Apple MFi Chip Interface Data SCL APPLE_SCL 28 Bideirection, Weak Pull Up SPI_MISO DEBUG_SPI_MISO 35 Output, Weak Pull Down SPI_MOSI DEBUG_SPI_MOSI 32 Input, Weak Pull Down SPI Data Input SPI_CS# DEBUG_SPI_CS# 36 Input, Weak Pull Down Chip Select Active Low SPI_CLK DEBUG_SPI_CLK 31 Input, Weak Pull Down SPI Clock SPI_SEL DEBUG_SPI_SEL 33 Input, Pull Up SPI Select UART_RX RXD 19 UART_TX TXD 17 UART Data Output UART_CTS Bidirection Weak Pull Down nCTS 18 3V3 3V3 11,12 RESET nRESET GROUND GND 1,2,3,4,13,14,15,27,34,37 40,41,43,44 Ground NC NC 5,8,9,10,16,20,21,24,26,30 38,39,42 Not Connect Apple MFi Chip Interface Clock SPI Data Output UART Data Input UART Clear to Send Active Low Positive Power Supply Input, Stong Pull Up Reset 1.6 Package Dimensions & Land Pattern ● unit = mm ● General Tolerances = ±0.2mm 0.15 2.80 1.95 1.50 1.55 18.00 0.50 0.90 1.00 BT-MSOII Dimensions 0.15 15.80 1.95 ANTENNA AREA 1.30 0.40 1.55 18.00 0.50 0.90 Land Pattern 2. Characteristics 2.1 Electrical Characteristics ■ Absolute Maximum Ratings Rating Storage Temperature range VDD Other terminal voltages Min Max Unit -40 -0.4 VSS-0.4 85 3.6 VDD+0.4 °C ■ Recommended Operating Conditions Operating Condition Operating Temperature range VDD Other terminal voltage Min Typ Max Unit -20 2.5 2.5 20 3.3 3.3 70 3.6 3.6 °C Typ Peak Unit 23 19 mA mA mA mA ■ Current consumption Classic (Test Condition : VDD =3.3V, Temp = 25°C, Sniff = 40ms) Standby current Connected current TX current with UART RX current with UART BLE (Test Condition : VDD =3.3V, Temp = 25°C, Sniff = 16.25ms) Typ Peak Unit 27 20 mA mA mA mA Input Voltage Levels Min Typ Max Unit VIL input logic level low VIH input logic level high Tr/Tf -0.4 0.7 x VDD 0.25xVDD VDD+0.4 25 ns Output Voltage Levels Min Typ Max Unit VOL output logic level low, lOL = 4.0mA 0.4 Tr/Tf 0.75 x VDD ns Input and Tristate Currents Min Typ Max Unit Strong pull-up Strong pull-down Weak pull-up Weak pull-down CI Input Capacitance High impedance state (no pulls) -150 10 -5 0.33 -0.1 -40 40 -1.0 -10 150 -0.33 0.1 μA μA μA μA pF μA Standby current Connected current TX current with UART RX current with UART UART baud rate = 230,400bps ■ Digital Terminals VOH output logic level high, lOH = -4.0mA 2.2 RF Characteristics RF Specification Condition Min Typ Max Unit Output transmit power 2.402 2.441 2.480 -25.79 3.88 2401.515 4.69 4.96 5.15 -6.29 4.81 925 -22.4 -48.09 -48.79 165 100 0.93 -13.7 -4.7 -6.4 -6.4 -84.6 -86.9 -86.9 -5 2480.485 dB dB dB dBm dBm dB Mhz Khz dBm dBm dBm Khz Transmit power density Transmit power control Pmin Pst Frequency Range 20dB bandwidth for modulation Transmitter Adjacent channel transmit power Modulation characteristics Intial carrier frequency tolerance Carrier frequency drift Receiver Sensitivity at 0.1% BER for all basic rate packet types Maximum input level ±2MHz ±3MHz ±4Mhz Δf1avg Δf2_pass_rate Δf2avg/Δf1avg df0_avg One slot packet(DH1) Three slot packet(DH3) Five slot packet(DH5) 2.402 2.441 2.480 -20 Khz KHz KHz KHz dBm dBm dBm dBm 10 2.3 Antenna Characteristics The antenna is monopole type of chip antenna. The antenna impedance matching is optimized for 1 mm ~ 2 mm mother board PCB thickness. The radiation pattern is impacted by the layout of the mother board. Typically the highest gain is towards GND plane and weakest gain away from the GND plane. ■ LOG, Smith Chart & VSWR ■ Radiation Gain Freq(Mhz) 2400 2420 2450 2500 Efficiency(%) 55.26 56.16 45.52 37.27 Avg. Gain(dBi) -2.58 -2.51 -3.42 -4.29 Peak Gain(dBi) 3.16 3.56 2.92 2.15 11 3. Terminal Description 3.1 UART Interface This is a standard UART interface for communicating with other serial devices. BT-MSOII UART interface provides a simple mechanism for communicating with other serial devices using the RS-232 protocol. When BT-MSOII is connected to another digital device, UART_RX and UART_TX transfer data between the 2 devices. The remaining a signal, UART_CTS implement optional RS232 hardware flow control 3.2 SPI Interface (Debug only) BT-MSOII provides a debug SPI interface for programming, configuring and debugging the BT-MSOII. Access to this interface is required in production. Ensure the 4 SPI signals externally. 3.3 I2C Interface BT-MSOII supports a firmware controlled I²C interface to communicate with external Device. The I²C timing is compliant with the Philips I²C Specification (100 kHz and 400 kHz). 12 4. Reset, RST# BT-MSOII is reset from several sources: ▪ RST# pin ▪ Power-on reset ▪ UART break character The RST# pin is an active low reset and is internally filtered using the internal low frequency clock oscillator. CSR recommends applying RST# for a period >5ms. 13 ■ Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The module is limited to OEM installation ONLY. OEM integrators are responsible for ensuring that the end-user has no manual instructions to remove or install module. The module is limited to installation in mobile or fixed applications, according to Part 2.1091(b). Separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and different antenna configurations. For a host manufacture’s using a certified modular, if (1) the module’s FCC ID is not visible when installed in the host, or (2) if the host is marketed so that end users do not have straightforward commonly used methods for access to remove the module so that the FCC ID of the module is visible; then an additional permanent label referring to the enclosed module: “Contains Transmitter Module FCC ID: 2AKMF-BT-MSOII” or “Contains FCC ID: 2AKMF-BT-MSOII” must be used. The host OEM user manual must also contain clear instructions on how end users can find and/or access the module and the FCC ID. Canada certification label of a module shall be clearly visible at all times when installed in the host product; otherwise, the host product must be labelled to display the Canada certification number for the module, preceded by the word “Contains” or similar wording expressing the same meaning, as follows: Contains IC : 22266-BTMSOII 14 ■ Product Information Model Number BT-MSOII Product Name Bluetooth Module Firmware Version 2.0.0 ■ Antenna The MT-MSOII Module has been designed to operate with the following antenna and gains. Use with other antenna types or with these antenna types at higher gains is strictly prohibited. Type of Antenna Gain (dBi) Chip Antenna 3.56 Type of Connector Permanent integral ■ Warning - U.S.A i) Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. ii) Caution: Exposure to Radio Frequency Radiation. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. Afin de se conformer aux exigences en matière d'exposition aux rayonnements radioélectriques, une distance de séparation d'au moins 20 cm doit être maintenue entre l'antenne de cet appareil et toutes les personnes. 15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 15 Page Layout : OneColumn Page Mode : UseNone Producer : doPDF Ver 7.3 Build 387 (Windows 7 Home Premium Edition (SP 1) - Version: 6.1.7601 (x64)) Create Date : 2016:12:29 17:00:14+09:00EXIF Metadata provided by EXIF.tools