Edgecore Networks ECW5212 802.11a/ac/b/g/n Wireless Access Point User Manual YZKECW5212 QSG 0415

Download:
Mirror Download [FCC.gov]
Document ID	2960538
Application ID	GSYIdMNlLYW50liG3lCy0A==
Document Description	User Manual rev 2.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.12kB (351513 bits)
Date Submitted	2016-04-15 00:00:00
Date Available	2016-04-15 00:00:00
Creation Date	2016-04-15 15:37:39
Producing Software	GPL Ghostscript 9.04
Document Lastmod	2016-04-15 15:42:39
Document Title	YZKECW5212_QSG_0415.pdf
Document Creator	PDFCreator Version 1.2.3
Document Author:	tting

Q ui c k Sta r t G u id e
802.11a/ac/b/g/n Wireless Access Point
ECW5212
1. Unpack the AP and Check Contents
b. Mounting on a Ceiling T-Bar
ECW5212
802.11a/ac/b/g/n
Wireless Access Point
AC power adapter
Position the AP’s ceiling-mount clip holders on either side of
the T-bar.
Four adhesive rubber feet
Turn the AP until the two clips lock it to the T-bar.
The AP mounting supports two different sizes of suspended
ceiling T-bars. The position illustrated above left is for 15 mm
bars. Use the position at a 90 degrees angle for 24.5 mm bars.
Documentation—Quick Start Guide (this document)
and Safety and Regulatory Information
Note: For safety and regulatory information, refer to the
Safety and Regulatory Information document included with
the AP.
3. Connect LAN Cable
2. Mount the AP
The AP can be mounted on a desktop, wall, or ceiling T-bar.
Note: The AP can be placed on a desktop using the
included rubber feet. When mounting the AP on a wall or
ceiling, do not attach the rubber feet.
a. Mounting on a Wall
Connect Category 5e or better cable to the Eth/PoE
1000BASE-T RJ-45 port.
Note: The Eth/PoE port connection can also provide PoE
power to the unit.
3. (Optional) Connect AC Power Adapter
Set two screws in the wall 140 mm (5.51 in.) apart.
Slide the AP’s wall mounting slots down onto the screws so
that the unit is secure.
www.edge-core.com
– 1 –
Connect the power adapter to the power socket on the AP.
Plug the power adapter into a nearby AC power source.
E032016-CS-R01
150200001406A
Quick Start Guide
4. Verify AP Operation
Hardware Specifications
Chassis
Power — on red for normal operation.
LAN — on/blinking green for a valid RJ-45 port link.
2G-WiFi/5G-WiFi — on/blinking green for radio enabled.
5. Connect to the Web User Interface
Size (W x D x H)
196 x 190 x 53 mm (7.72 x 7.48 x 2.09 inch)
Weight
554.2 g (1.22 lb)
Temperature
Operating: 0 °C to 45 °C (32 °F to 113 °F)
Storage: -40 °C to 70 °C (-40 °F to 158 °F)
Humidity
Operating: 5% to 95% (non-condensing)
Network Interfaces
Ports
Eth/PoE RJ-45 Port: 1000BASE-T, PoE+ PD
2.4 GHz Radio
IEEE 802.11b/g/n
5 GHz Radio
IEEE 802.11a/ac/n
Radio Frequencies
2.4 – 2.4835 GHz (US, Canada, ETSI)
5.15 – 5.25 GHz (lower band) US/Canada,
Europe
5.725 – 5.825 GHz (upper band) US/Canada
Power Supply
PoE Input Power
48 VDC, 802.3af-standard compliant
AC Power Adapter
AC Input: 100 ~ 240 VAC, 50/60 Hz
DC Output: 12 VDC, 1 A
Connect a PC directly to the AP’s LAN port.
Power Consumption 11 W maximum
Set the PC IP address to be on the same subnet as the AP
(that is, the PC and AP addresses must both start 192.168.1.x
with subnet mask 255.255.255.0).
Regulatory Compliances
Enter the AP’s default management IP address of
192.168.1.1 into the web browser address bar.
Log in to the web interface using default settings:
User Name = root
Password = admin123
Note: To reset the AP to factory defaults, press the Reset
button for more than 5 seconds.
Note: For more information on AP configuration using the
web interface, refer to the Management Guide, which is on
the Edgecore web site, www.edge-core.com.
Radio
EN 300 328 V1.9.1 (2015-02)
EN 301 893 V1.8.1 (2015-03)
EN 301 489-1 V1.9.2 (2011-09)
EN 301 489-7 V2.2.1 (2012-09)
FCC Part 15C 15.247/15.207 (2.4-2.4835GHz,
5.725-5.850GHz) 2014
FCC Part 15E 15.407 (5.150GHz-5.250GHz)
2014
Emissions
EN 55022 2010+AC:2011
EN 61000-3-2:2014
FCC Class B Part 15, 2014
Immunity
EN 55024 : 2010
EN 61000-4-2 : 2009
Safety
UL (CSA 22.2 No. 60950-1 & UL60950-1)
CB (IEC/EN60950-1)
– 2 –

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2016:04:15 15:37:39+08:00
Creator Tool                    : PDFCreator Version 1.2.3
Modify Date                     : 2016:04:15 15:42:39+08:00
Metadata Date                   : 2016:04:15 15:42:39+08:00
Format                          : application/pdf
Description                     : 
Creator                         : tting
Title                           : YZKECW5212_QSG_0415.pdf
Keywords                        : 
Producer                        : GPL Ghostscript 9.04
Document ID                     : uuid:32bdd0fe-861f-4d15-98fd-e045d8583679
Instance ID                     : uuid:847885c7-d6e9-4834-9c7b-89e1ce35f544
Page Count                      : 2
Subject                         : 
Author                          : tting

EXIF Metadata provided by EXIF.tools