| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2018920 |
| Application ID | t+6/Q+FALK6MKS8D0gr/XQ== |
| Document Description | SMCWPCI-N5_UG _REV2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 168.67kB (2108395 bits) |
| Date Submitted | 2013-07-18 00:00:00 |
| Date Available | 2013-07-28 00:00:00 |
| Creation Date | 2013-06-09 11:13:28 |
| Producing Software | Acrobat Distiller 8.0.0 (Windows) |
| Document Lastmod | 2013-07-17 08:36:41 |
| Document Title | SMCWPCI-N5_UG _REV2 |
| Document Creator | PScript5.dll Version 5.2.2 |
CE MARK WARNING
This is a class B product. In a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.
NATIONAL RESTRICTIONS
This device is intended for home and office use in all EU countries (and other countries following
the EU directive 1999/5/EC) without any limitation except for the countries mentioned below:
Country
Restriction
Reason/Remark
Bulgaria
None
General authorization required for outdoor use and
public service
France
Outdoor use
Military Radiolocation use. Refarming of the 2.4 GHz
limited to 10 mW band has been ongoing in recent years to allow current
e.i.r.p. within the relaxed regulation. Full implementation planned 2012
band
2454-2483.5
MHz
italy
None
If used outside of own premises, general authorization is
required
Luxembourg
None
General authorization required for network and service
supply(not for spectrum)
Norway
Implemented
This subsection does not apply for the geographical area
within a radius of 20 km from the centre of Ny-Ă
lesund
Russian
Federation
None
Only for indoor applications
NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the userâs authority
to operate the equipment.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
â˘
â˘
â˘
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1ďź This device may not cause harmful interference.
2ďź This device must accept any interference received, including interference that
may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the userâs authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the userâs authority
to operate the equipment.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.
âTo comply with FCC RF exposure compliance requirements, this grant is applicable to only
Mobile Configurations. The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.â
CANADIAN COMPLIANCES STATEMENT
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference
(2) This device must accept any interference, including interference that may cause
undesired operation of the device
Le prĂŠsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisĂŠe aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage,
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioĂŠlectrique subi, mĂŞme si le
brouillage est susceptible d'en compromettre le fonctionnement.
INDUSTRY CANADA STATEMENT
This radio transmitter (identify the device by certification number, or model number if Cat
egory II) has been approved by Industry Canada to operate with the antenna types listed
below with the maximum permissible gain and required antenna impedance for each ante
nna type indicated. Antenna types not included in this list, having a gain greater than the
maximum gain indicated for that type, are strictly prohibited for use with this device.
Le prĂŠsent ĂŠmetteur radio (identifier le dispositif par son numĂŠro de certification ou son n
umÊro de modèle s'il fait partie du matÊriel de catÊgorie I) a ÊtÊ approuvÊ par Industrie C
anada pour fonctionner avec les types d'antenne ĂŠnumĂŠrĂŠs ci-dessous et ayant un gain a
dmissible maximal et l'impĂŠdance requise pour chaque type d'antenne. Les types d'anten
ne non inclus dans cette liste, ou dont le gain est supĂŠrieur au gain maximal indiquĂŠ, sont
strictement interdits pour l'exploitation de l'ĂŠmetteur.
Under Industry Canada regulations, this radio transmitter may only operate using an ant
enna of a type and maximum (or lesser) gain approved for the transmitter by Industry Ca
nada. To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more t
han that necessary for successful communication.
ConformĂŠment Ă la rĂŠglementation d'Industrie Canada, le prĂŠsent ĂŠmetteur radio peut fo
nctionner avec une antenne d'un type et d'un gain maximal (ou infĂŠrieur) approuvĂŠ pour l'
ĂŠmetteur par Industrie Canada. Dans le but de rĂŠduire les risques de brouillage radioĂŠlec
trique Ă l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de s
orte que la puissance isotrope rayonnĂŠe ĂŠquivalente (p.i.r.e.) ne dĂŠpasse pas l'intensitĂŠ n
ĂŠcessaire Ă l'ĂŠtablissement d'une communication satisfaisante.
Complies with the Canadian ICES-003 Class B specifications.
Cet appareil numĂŠrique de la classe B est conforme Ă la norme NMB-003 du Canada.
Declaration of Conformity (DoC) can be obtained from www.smc.com -> support -> download
EUROPE - EU DECLARATION OF CONFORMITY
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The
following test methods have been applied in order to prove presumption of conformity with the
essential requirements of the R&TTE Directive 1999/5/EC:
EN 60950-1:2006 + A11: 2009 +A1: 2010 + A12: 2011 Safety of Information Technology
Equipment.
EN 300 328 V1.7.1: 2006-10 Electromagnetic compatibility and Radio spectrum Matters
(ERM); Wideband transmission systems; Data transmission equipment operating in the
2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN
covering essential requirements under article 3.2 of the R&TTE Directive.
EN 301 489-1 V1.9.2/ 2011-09E N 301 489-17 V2.1.1/ 2009-05 Electromagnetic
compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC)
standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz
wideband transmission systems and 5 GHz high performance RLAN equipment.
EN 62311: 2008 Assessment of electronic and electrical equipment related to human
exposure restrictions for electromagnetic fields (0 Hz - 300 GHz).
This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU
member states and EFTA countries, except in France and Italy where restrictive use applies.
In Italy the end-user should apply for a license at the national spectrum authorities in order to
obtain authorization to use the device for setting up outdoor radio links and/or for supplying public
access to telecommunications and/or network services.
This device may not be used for setting up outdoor radio links in France and in some areas the RF
output power may be limited to 10 mW EIRP in the frequency range of 2454 - 2483.5 MHz. For
detailed information the end-user should contact the national spectrum authority in France.
This equipment may be operated in:
The official CE certificate of conformity can be downloaded by selecting the
relevant model/ part number from www.smc.com -> support -> download.
Bulgarian
, SMC Networks ,
1999/5/EC.
Czech
esky
SMC Networks tĂmto prohlaĹĄuje, Ĺže tento Radio LAN device je ve shod se
zĂĄkladnĂmi poĹžadavky a dalĹĄĂmi p ĂsluĹĄnĂ˝mi ustanovenĂmi sm rnice 1999/5/ES.
Danish
Dansk
Undertegnede SMC Networks erklÌrer herved, at følgende udstyr Radio LAN device
overholder de vÌsentlige krav og øvrige relevante krav i direktiv 1999/5/EF
Dutch
Nederlands
Hierbij verklaart SMC Networks dat het toestel Radio LAN device in
overeenstemming is met de essentiĂŤle eisen en de andere relevante bepalingen van
richtlijn 1999/5/EG
Bij deze SMC Networks dat deze Radio LAN device voldoet aan de essentiĂŤle eisen
en aan de overige relevante bepalingen van Richtlijn 1999/5/EC.
English
Hereby, SMC Networks, declares that this Radio LAN device is in compliance with
the essential requirements and other relevant provisions of Directive 1999/5/EC.
Estonian
Eesti
Käesolevaga kinnitab SMC Networks seadme Radio LAN device vastavust direktiivi
1999/5/EĂ pĂľhinĂľuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele
sätetele.
Finnish
Suomi
Valmistaja SMC Networks vakuuttaa täten että Radio LAN device tyyppinen laite on
direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden
ehtojen mukainen.
French
Français
Par la prĂŠsente SMC Networks dĂŠclare que l'appareil Radio LAN device est
conforme aux exigences essentielles et aux autres dispositions pertinentes de la
directive 1999/5/CE
German
Deutsch
Hiermit erklärt SMC Networks, dass sich dieser/diese/dieses Radio LAN device in
Ăbereinstimmung mit den grundlegenden Anforderungen und den anderen
relevanten Vorschriften der Richtlinie 1999/5/EG befindet". (BMWi)
Hiermit erklärt SMC Networks die Ăbereinstimmung des Gerätes Radio LAN device
mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen
der Richtlinie 1999/5/EG. (Wien)
Greek
!##$%*<=
?@ J$% QXZ[\]X SMC Networks ^$#_%@* [J* radio LAN device ]\??[Z`_%@JX* QZ[]
J*] [\]*_^@*] XQX*J$]@*]
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.4
Linearized : No
Page Mode : UseOutlines
XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool : PScript5.dll Version 5.2.2
Modify Date : 2013:06:09 12:28:39+08:00
Create Date : 2013:06:09 11:13:28+08:00
Metadata Date : 2013:06:09 12:28:39+08:00
Format : application/pdf
Title :
Creator :
Producer : Acrobat Distiller 8.0.0 (Windows)
Document ID : uuid:20199f68-776f-47ad-8335-840b399a9b62
Instance ID : uuid:295f8342-d797-44e3-808c-62412a6484f9
Page Count : 41
Page Layout : OneColumn
EXIF Metadata provided by EXIF.tools