Electronic Systems Technology ESTEEM195EA Wireless LAN transceiver User Manual CHAPTER 2

Electronic Systems Technology Wireless LAN transceiver CHAPTER 2

User Manual Appendix B

APPENDIX B SPECIFICATIONS Model 195Ea Specifications Revised: 27 Jan 12 APX B-1 EST P/N AA107A LED Indicators Power On/Off Receiver On/Off Carrier Detect On/Off Transmitter On/Off Link Status On/Off I/O Connectors Ethernet 10/100Base T RJ-45 RS-232C Programming/Data Port RJ-45 Dual Antenna input/Outputs TNC Reverse Female Remote Input Power Power Over Ethernet Cable Direct Input Power Optional, Header Screw Connector Transmiter Frequency of Operation 5.745 to 5.825 GHz Software Selectable in 17 Channels RF Data Rates 6 to 54 Mbps (8 steps) Tx Peak Output Power 250mW to 1 Watt (Pk) (4-levels) RF Output Impedance 50 ohms Receiver Rx Sensitivity -72 dBm @54 Mbps to –92 dBm @ 6 Mbps Frame Error Rate <10% Power Power over Ethernet IEEE 802.3at Power Supply, 48 VDC @ 30 Watts Power Connector on Unit 10 to 28 VDC Receive 250 ma @ 12 VDC Transmit 1.25 A @ 12 VDC Case Dimensions 1.9 in. H x 6.7 in. W x 6.2 in. L Weight 1.25 lbs. Outdoor Pole Mounting Kit Optional, EST P/N 195PM Other Warranty 1 Year Temperature Range -30 to +60 C Humidity 95% Non-condensing FCC Type Acceptance Pending Industry Canada Type Acceptance Pending Specifications Subject to Change Without Notice
APPENDIX B SPECIFICATIONS Model 195Ea Case Specifications Revised: 27 Jan 12 APX B-2 EST P/N AA107A Model AA20DMEg
APPENDIX B SPECIFICATIONS Antenna Specifications Revised: 27 Jan 12 APX B-3 EST P/N AA107A Model: AA20DMEa Applications: Model 195Ea direct case mount Antenna Type: Omni-Directional, Sleeve dipole Frequency: 5.735 to 5.835 GHz Polarization: Vertical Impedance: 50 ohms Gain: 4.5 dBi (2.5 dBd) VSWR: < 1.5:1 Power: 10 W Front To Back Ratio: n/a Horizontal Beamwidth: n/a Vertical Beamwidth: n/a Antenna Material: Polyurethane Plastic Radome Recommended Mounting Hardware: n/a Antenna Connector: TNC-R Male Flexibility: +/- 20  Antenna Envelope: 7.36 in. length by .51 in. width Temperature: -20 to +65 C Weight: 28.4 grams Model No: AA20Ea Antenna Type: Omni Directional, DC Grounded Applications: Fixed base Frequency: 5.725-5.825 GHz Polarization: Vertical Impedance: 50 ohms Gain: 6 dBi (8 dBd) VSWR: 1.5:1 Typical Vertical Beamwidth: 6 degrees @ ½ power Recommended Mounting Hardware: Pole Mounting Bracket, Supplied Antenna Connector: TNC male reverse polarity with 18 in. pigtail and weatherproof boot Maximum Power Input: 25 Watts Wind Survival: 125 mph Antenna Envelope: 20.2 in. L x 1.25 in. Equivalent Flat Plate Area: .06 sq. ft Lateral Thrust at Rated Wind: 5.2 lbs feet Radome: White UV resistant fiberglass Weight: 0.5 lbs. AA20DMEa AA20Ea Caution To comply with the FCC exposure compliance requirements, a separation distance of at least ~113 cm must be maintained between the antenna and all persons.
APPENDIX B SPECIFICATIONS Antenna Specifications Revised: 27 Jan 12 APX B-4 EST P/N AA107A Model No: AA205Ea Applications: Fixed base mounting Antenna Type: Directional, Linear Polarized Panel, DC grounded, Integral Bandpass Filter Frequency: 5.725-5.875 GHz Polarization: Vertical or Horizontal Impedance: 50 ohms Gain: 22 dBi (20 dBd) nominal VSWR: <1.5:1 nominal Front to Back Ratio: ≥ 25 dB Horizontal Beamwidth: 9 degrees @ ½ power Vertical Beamwidth: 9 degrees @ ½ power Antenna Material: White UV Resistant Polypropylene Recommended Mounting Hardware: Adjustable Mounting Bracket provided for wall mounting or masts between 1 in and 2.75 in. O.D. Antenna Connector: TNC male reverse polarity with 18 in. pig-tail and weatherproof boot. Maximum Power Input: 20 Watts Antenna Envelope: 14.5 in. length by 14.5 in. height by 1.75 in. depth Operating Temperature: -40 to +85 F. Weight: 3.5 lbs. Model AA205Ea Caution To comply with the FCC exposure compliance requirements, a separation distance of at least ~113 cm must be maintained between the antenna and all persons.

Navigation menu