Electronic Systems Technology ESTEEM195EP BASE STATION TRANSMITTER User Manual CHAPTER 2

Download:
Mirror Download [FCC.gov]
Document ID	690207
Application ID	vBqnE+9ehrWRFYT0Th12ZQ==
Document Description	SPECIFICATIONS
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.18kB (214772 bits)
Date Submitted	2006-08-04 00:00:00
Date Available	2006-08-04 00:00:00
Creation Date	2006-07-25 15:34:00
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2006-07-25 15:34:38
Document Title	CHAPTER 2
Document Creator	Acrobat PDFMaker 7.0.7 for Word
Document Author:	Debra Vaughn

APPENDIX B
SPECIFICATIONS
Model 195Eg Specifications
LED Indicators
Power On/Off
Carrier Detect On/Off
Link Status On/Off
Receiver On/Off
Transmitter On/Off
I/O Connectors
Ethernet 10/100Base T
RS-232C Programming Port
RJ-45
RJ-45
Dual Antenna input/Outputs
Direct Input Power
TNC Reverse Female
Header Screw Connector
Transmiter
Frequency of Operation
RF Data Rates
4.960 & 4.980 GHz
Software Selectable with two Channels
1,2,5.5,6,9, & 11 Mbps Fixed or Auto Scaling
DSSS/CCK Modulation
Tx Output Power
2 Watts (peak) / 1 watt (average)
RF Output Impedance
50 ohms
Receiver
Rx Sensitivity
-85 dBm @11 Mbps to –92 dBm @ 1 Mbps
Frame Error Rate <10%
Power
Power Connector on Unit
Receive
Transmit
10 to 16 VDC
320 ma @ 12 VDC
1500 ma @ 12 VDC
Case
Dimensions
1.9 in. H x 6.7 in. W x 6.2 in. L
Weight
Outdoor Pole Mounting Kit
1.25 lbs.
Optional, EST P/N 195PM
Other
Warranty
1 Year
Temperature Range
Humidity
FCC Type Acceptance
-30° to +60° C
95% Non-condensing
Pending Type Acceptance
Specifications Subject to Change Without Notice
Revised: 16 Jun 06
APX B-1
EST P/N AA107P
APPENDIX B
SPECIFICATIONS
Model 195Eg Case Specifications
Revised: 16 Jun 06
APX B-2
EST P/N AA107P
APPENDIX B
SPECIFICATIONS
Antenna Specifications
Model No:
Antenna Type:
Applications:
Frequency:
Polarization:
Impedance:
Gain:
VSWR:
Front to Back Ratio:
Horizontal Beamwidth:
Vertical Beamwidth:
Antenna Material:
Mounting Hardware:
Antenna Connector:
Antenna Envelope:
Weight:
AA191Ep
Omni-Directional, Vehicle Mount
Mobile
4.9-5.0 GHz
Vertical
Caution
50 ohms
Omni-directional antenna
5.5 dBi
should not be located within
< 1.5
20 cm of personnel.
n/a
n/a
n/a
Black Radome
Base Included
TNC-R Male
12 in. length by 1.75 in width
.08 lbs.
Model: AA20DMEp
Applications: Model 195Ep direct case mount
Antenna Type: Omni-Directional, Sleeve dipole
Frequency: 4.9-5.0 GHz
Polarization: Vertical
Impedance: 50 ohms
Gain: 5.5 dBi (3.5 dBd)
VSWR: < 2:1
Power: 10 W
Front To Back Ratio: n/a
Horizontal Beamwidth: n/a
Vertical Beamwidth: n/a
Antenna Material: Polyurethane Plastic Radome
Recommended Mounting Hardware: n/a
Antenna Connector: TNC-R Male
Flexibility: +/- 20 °
Antenna Envelope: 8.28 in. length by .54 in. width
Temperature: -40 to +70 C°
Weight: 33 grams
Model AA191Ep
Caution
Omni-directional antenna
should not be located within
20 cm of personnel.
Model AA20DMEp
Revised: 16 Jun 06
APX B-3
EST P/N AA107P
APPENDIX B
SPECIFICATIONS
Antenna Specifications
Model No:
Antenna Type:
Applications:
Frequency:
Polarization:
Impedance:
Gain:
VSWR:
Front to Back Ratio:
Horizontal Beamwidth:
Vertical Beamwidth:
Antenna Material:
Mounting Hardware:
Antenna Connector:
Antenna Envelope:
Weight:
AA20Ep
Omni Directional, DC Grounded
Fixed base
4.9-5.0 GHz
Vertical
50 ohms
9 dBi (7dBd)
1.2:1 Typical
n/a
n/a
40 degrees @ ½ power
Brass radiator, UV inhibited
fiberglass enclosed
Base to Mast, Supplied.
TNC-R Male with 36in. pig-tail.
12 in. length by 1 in. diameter
1.5 lbs.
Caution
To comply with the FCC
exposure compliance
requirements, a separation
distance of at least 20 cm
must be maintained between
the antenna and all persons.
Mounting Bracket
Model AA20Eg
Revised: 16 Jun 06
APX B-4
EST P/N AA107P
APPENDIX B
SPECIFICATIONS
Antenna Specifications
Model No:
Antenna Type:
Applications:
Frequency:
Polarization:
Impedance:
Gain:
VSWR:
Front to Back Ratio:
Horizontal Beamwidth:
Vertical Beamwidth:
Antenna Material:
Mounting Hardware:
Antenna Connector:
Maximum Power Input:
Antenna Envelope:
Windload (RWV):
Lateral Thrust at
Rated Wind:
Wind Surface Area:
Weight:
Revised: 16 Jun 06
AA203Ep
Directional, DC grounded
Fixed base.
4.9-5.0 GHz
Vertical or Horizontal
50 ohms
9 dBi (7 dBd)
< 1.5
23 dB
55 degrees @ ½ power
55 degrees @ ½ power
Sealed in UV stable fiberglass enclosed radome
Stainless steel U bolts (included) for mounting up
to 1 5/8 in. diameter pipe.
TNC-R Male with 36in. pig tail
5 Watts
4.5 in. length by 3 in. diameter
125 mph
5.8 lbs.
0.060 ft2
1 lbs.
Caution
To comply with the FCC
exposure compliance
requirements, a separation
distance of at least 20 cm
must be maintained between
the antenna and all persons.
Model AA203Ep
APX B-5
EST P/N AA107P
APPENDIX B
SPECIFICATIONS
Antenna Specifications
Model No:
Applications:
Antenna Type:
Frequency:
Polarization:
Impedance:
Gain:
VSWR:
Front to Back Ratio:
Horizontal Beamwidth:
Vertical Beamwidth:
Antenna Material:
AA204Ep
Fixed base mounting
2.4 GHz ISM, Directional, DC Grounded, Parabolic Grid
4.9-5.0 GHz
Vertical or Horizontal
Caution
50 ohms
To comply with the FCC exposure
26 dBi (24 dBd) nominal
compliance requirements, a
< 1.5:1 nominal
separation distance of at least 50 cm
>24 dB
must be maintained between the
antenna and all persons.
16 degrees @ ½ power
11 degrees @ ½ power
Zinc plated cold rolled steel with polyester power
coat finish
Recommended Mounting
Hardware:
Standard U-bolt steel mast clamp complete with
mounting hardware. Designed for masts of up to
2.5 in. O.D.
Antenna Connector:
Maximum Power Input:
Wind Survival:
Wind Load:
Antenna Envelope:
Weight:
TNC-R Male with 36 in. pig-tail
10 Watts
100 mph
16 mph
34 in. length by 17 in. width by 11 in. height
3 lbs.
Model AA204Eg
Revised: 16 Jun 06
APX B-6
EST P/N AA107P

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Company                         : Electronic Systems Technology
Source Modified                 : D:20060725182349
Creator Tool                    : Acrobat PDFMaker 7.0.7 for Word
Modify Date                     : 2006:07:25 15:34:38-04:00
Create Date                     : 2006:07:25 15:34-04:00
Metadata Date                   : 2006:07:25 15:34:38-04:00
Document ID                     : uuid:6c9e2854-40e0-431d-b99e-0424be8decf8
Instance ID                     : uuid:e42de1eb-09dc-48e7-97a5-7ea01ee78bd5
Version ID                      : 28
Format                          : application/pdf
Title                           : .CHAPTER 2
Creator                         : Debra Vaughn
Subject                         : 
Headline                        : 
Page Count                      : 6
Page Layout                     : OneColumn
Author                          : Debra Vaughn

EXIF Metadata provided by EXIF.tools