Elo Touchsystems Jh 10T08 Users Manual
JH 10T08 to the manual 6f52cddc-920d-4c7a-b3df-fcdb07137895
2015-02-06
: Elo-Touchsystems Elo-Touchsystems-Jh-10T08-Users-Manual-539914 elo-touchsystems-jh-10t08-users-manual-539914 elo-touchsystems pdf
Open the PDF directly: View PDF 
.
Page Count: 54
| Download | |
| Open PDF In Browser | View PDF |
USER MANUAL Maritime Multi Computer Models JH JH JH JH 10T08 15T05 19T02 23T02 MMC MMC MMC MMC - 10,4 15,0 19,0 23,1 inch inch inch inch Maritime Maritime Maritime Maritime Multi Multi Multi Multi Computer Computer Computer Computer User Manual MMC (ETX) Updated: 09 Mar 2007 Doc Id: INB100014-1 (Rev 19) For models (including different options): -A1, -A2, -C1, -C2 Jakob Hatteland Display AS, Åmsosen, N-5578 Nedre Vats, Norway Tel: (+47) 5276 3700 - Fax: (+47) 5276 5444 - e-mail: jhd-no@hatteland.com Slim User Manual Copyright © 2007 Jakob Hatteland Display AS Aamsosen N-5578 Nedre Vats, Norway Information in this manual is copyrighted to the respective owners. All rights are reserved by Jakob Hatteland Display AS. This information may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-readable form without the prior written consent of Jakob Hatteland Display AS. The products described, or referenced, herein are copyrighted to the respective owners. The products may not be copied or duplicated in any way. This documentation contains proprietary information that is not to be disclosed to persons outside the user’s company without prior written consent of Jakob Hatteland Display AS. The copyright notice appearing above is included to provide statutory protection in the event of unauthorized or unintentional public disclosure. All other product names or trademarks are properties of their respective owners ! Contents Contents..................................................................................... 3 Contents of package...........................................................................5 General....................................................................................... 7 Introduction to Jakob Hatteland Display AS........................................ 8 About this manual................................................................................9 Basic Construction - Maritime Multi Computers................................ 10 Product Labels (Example)................................................................. 11 Serial Number Label..................................................................... 11 Warranty Label.............................................................................. 11 Touchscreen products.......................................................................12 Location of Touchscreen label.......................................................13 Installation................................................................................ 15 Installation and mounting..................................................................16 Brightness knob precaution...............................................................16 Ergonomics.......................................................................................17 Cables...............................................................................................18 Cable Entries & Connectors (Marked area) - Illustration only.......18 Maximum Cable Length................................................................19 Standard Bracket...............................................................................19 Operation.................................................................................. 21 Physical Overview - MMC ETX......................................................... 22 Specifications.......................................................................... 25 Specifications - JH 10T08 MMC........................................................ 26 Specifications - JH 15T05 MMC........................................................ 27 Specifications - JH 19T02 MMC........................................................ 28 Specifications - JH 23T02 MMC........................................................ 29 IND100206-9 INB100014-1 (Rev 19) Contents Technical Drawings................................................................. 31 Technical Drawings - JH 10T08 MMC............................................... 32 Standard Version...........................................................................32 Technical Drawings - JH 15T05 MMC............................................... 33 Standard Version...........................................................................33 Technical Drawings - JH 19T02 MMC............................................... 34 Standard Version...........................................................................34 Bracket Version.............................................................................35 Technical Drawings - JH 23T02 MMC............................................... 36 Standard Version...........................................................................36 Bracket Version.............................................................................37 Technical Drawings - Accessories......................................... 39 MMC ETX Bracket.............................................................................40 Appendixes.............................................................................. 41 Pin Assignments - Common Connectors........................................... 42 Basic Trouble-shooting......................................................................45 Declaration of Conformity..................................................................46 Return Of Goods Information............................................................ 47 Terms.................................................................................................48 Notes.................................................................................................51 General Notes: (For all products)..................................................51 Note for ECDIS Systems...............................................................51 Note for Documentation CD-ROM................................................51 Important BIOS Reset / No picture information.............................52 Revision History................................................................................53 Contact Information................................................................ 54 IND100206-9 INB100014-1 (Rev 19) Contents of package This product is shipped with: Item Description Documentation/Drivers/Software CD(s) for factory installed components like mainboard, IDE, network etc. Illustration 1 pcs of Standard Power Cable. (European Type F “Schuko” or US Type B standard plug) Length 1.8m Note: Power cable not included in the DC version. 1 pcs of User Manual (Slim version) Note: The separate documentation for third party components may be available on attached CD. The printed manual only covers specific information for Hatteland products, and not third party components. 1 pcs of configuration, test report and checklist sheets. Optional accessories for Panel Computers: Item Description Bracket mounting kit: (Delivered only with optional bracket) 4 pcs of RenCol Tristar Knob Male - M6X10 mm 4 pcs of MicroPlastic - 6 mm Nylon washer. 4 pcs of Bolt with shoulder washer - M6X1X20 4 pcs of Flat washer IND100207-1 Illustration Suspension Bracket INB100014-1 (Rev 19) INB100014-1 (Rev 19) General INB100014-1 (Rev 19) Jakob Hatteland Display AS Introduction to Jakob Hatteland Display AS Founded in 1987, Jakob Hatteland Display (JHD) offers the widest range of type approved marine monitors, panel computers and type approved marine computers for the worldwide commercial, naval, yacht and cruise market. Today the group develops and manufactures a complete range of IEC 60945 tested marine monitors, panel computers and IEC 60945 tested marine computers. “Design meets Functionality” - Series 2 ATTRACTION is more then just to show a nice picture on a screen. The new IEC60945 tested man-machine interfaces, offered by Jakob Hatteland Display AS, will fulfill the customers wish for outstanding design combined with the reliability of approved maritime Panel-Computers and Displays. These IP rated products are meant to be usable in all maritime applications. By the proven optical bonding technology, the Panel Computers and Displays show drastically reduced reflection and enhanced optical performance. This truly allows inside or outside use of these products. Cool is not only the design, but also the product by intelligent heat dissipation and reduced heating storage. Using state-of-the-art components such as LCD-TFT Modules and ETX-PC bases industrial computers, long-term availability and serviceability is secured. Flexibility in application and service friendliness is achieved by a unique backpack solution, whereas the detachable backpack contains the “intelligence” of the product. The extreme small form factor used on this product line with a general depth of only 75mm (!) and for example for the 19in with 416 (W) x 372 (H) mm, allows new-builds and retrofit installation almost everywhere. The flush mounted glass front shows only what is necessary: the content of the picture. The frameless design can smoothly be integrated into a console or it can be used as table mounted device (bracket version). A console version are also available for installment on flybridges with IP66 rating. This new HATTELAND® Series 2 Panel Computers MMC2 and Displays MMD2 will be available from Q2 2006 onwards in 12in., 15in. and 19in. sizes. The concept allows easy scaling in sizes from small LCD screens up to large sizes of more than 32in LCD wide-screens. This outstanding and affordable product range offers a wide choice for different needs. Approved Marine Displays (MMD/STD) - Series 1 Hatteland Display’s marine monitors are based on high quality and state-of-the-art components with the highest specifications, and meet all requirements for harsh maritime use. The displays are easily integrated into your system, due to standardized products and features. The MMD (Maritime Multi Display) series consists of sizes ranging from 10in to 23in. Specifically designed for navigation and automation systems on ships, these certified LCD monitors comply to IP66 described in IEC 60925, are tested according to IEC 60945 and are approved by major classification societies such as ABS, BV, ClassNK, DNV, GL and LR. Further to this marine standard, the 19in MMD, the 20in MMD and the 23in MMD marine monitors are also available as ECDIS and ARPA radar-compliant units. General IND100077-1 INB100014-1 (Rev 19) Jakob Hatteland Display AS Approved Marine Panel Computers (MMC) - Series 1 The combination of the reliable design of the marine TFT-LCD modules, together with industrial computer boards, allows Hatteland Display to offer a product range for customer applications where space is critical and full function is desired in a single unit. In particular, the standardized ETX-board form factor allows full flexibility when it comes to processor choice. Because of multiple useful standard components we can offer a highly attractive commercial package The MMC (Maritime Multi Computer) series consist of sizes ranging from 10in to 23in. These products have also been designed for typical marine applications in navigation, automation and other systems. Following Hatteland’s philosophy, these marine panel computers are fully tested according to IEC 60945 and are designed for type approval. Approved stand-alone and rack-mounted marine computers Two concepts are followed to offer variation in size, function and expansion slots for customers: approved black-box computers for limited space and approved computers for standard 19in racks, which offer a high degree of expansion. Configurations according to customer wishes are implicit, such as the operating system, CD-burner, RAM, graphic card, HD, add-on cards, factory installed software and many, many more. The approved computers are tested according to IEC 60945 and IACS E10 and meet the requirements for IEC 61174 (ECDIS). Several approvals by major classification societies such as ABS, BV, ClassNK, DNV, GL and LR are available or pending. Flexible display solutions and night vision facilities All JHD Type Approved displays, panel computers and marine computers provide maximum flexibility for customer applications. JHD offers all products with AC or DC power supply, and marine displays and marine panel computers have a fully linear dimmable function for night vision. Upon customer request, specific color, mechanical and electrical function designs can be implemented. Many more options are also available such as, sun visors, mounting brackets, different Windows or Linux operating systems and touch screens. All products are designed and manufactured by JHD in Nedre Vats, Norway. The production and configuration of all products takes place within Hatteland’s high capacity production plant#1 (opened in September 2003) in Nedre Vats, Norway. Hatteland’s production facilities are designed for future expansion, which has enabled the creation of plant#2, our Optical Technology facility, opened in October 2006. The chosen materials for the production of our products are high grade industrial components able to fulfil form, fit and function requests. About this manual The manual contains electrical, mechanical and input/output signal specifications. All specifications in this manual, due to manufacturing, new revisions and approvals, are subject to change without notice. However, the last update and revision of this manual are shown both on the frontpage and also in the “Revision History” chapter. Please use that as a reference. Furthermore, for third party datasheet and user manuals, please see dedicated interactive CD (where included) delivered with the product or contact our sales personnel for support. Please see the Contents Of Package chapter in the beginning of this manual to determine if a dedicated manual CD are included. General IND100077-1 INB100014-1 (Rev 19) Basic Construction - Maritime Multi Computers Basic Construction Maritime Multi Computers Centerbox & component mounting platform Glass (or touchscreen option) Backcover/chassis TFT Display Front frame Front frame controller hatch Illustration General IND100077-19 10 INB100014-1 (Rev 19) Product Labels (Example) Serial Number Label TOUCH SCREEN This product is equipped with a Resistive Touch Screen: Manufacturer : ELO TouchSystems Touch Controller : 2210 Serial Controller P/N 055165-000 Driver Download : www.elotouch.com VSD100564-2210 Product Information Manufacture: Product: Jakob Hatteland Display 19 Inch NORWAY TFT 100W Product type: # JH 19T01MMD-A1-831 Serial Number 115VAC/50-60Hz 230VAC/50-60Hz Manufacturer & Country Product & Serial Number Product Information Manufacture: Product: Jakob Hatteland Display 19 Inch NORWAY TFT Description Power rating 100W Product type: # JH 19T01MMD-A1-831 Serial Number 115VAC/50-60Hz 230VAC/50-60Hz Input Volt Product Type and Serial Number JH XXAXX AAA-AX-XXX NOMENCLATURE JH 19T01 MMD-A1-831 Example Serial Number Sub Version (AC-Odd / DC-Even number) Version (Number & Product Name) TFT (Thin Film Transistor) Display Size (inch) Jakob Hatteland (manufacturer) Warranty Label If you are to perform service on a unit still under warranty, any warranty will be void if this label is attempted removed/re-glued or removed completely. This label is usually located on the back of the product and near the serial number label. This is to help our service department to better determine if there has been any unauthorized service on a product still under warranty. General IND100077-23 11 INB100014-1 (Rev 19) Touchscreen products Introduction to Jakob Hatteland Display products with touchscreen We use both Resistive and Capacitive touchscreen solutions for our products. Please visit our website to find your exact type number and then determine if it uses Resistive or Capacitive. If you have a customized or tailored product, please check the specifications in this manual or third-party specifications from your supplier. Capacitive Touchscreen Capacitive touchscreens operate using oscillator circuits that are located in each corner of the glass overlay and measure the capacitance of the area to be “touched”. Depending on where the user touches the overlay, the oscillators will vary in frequency. A touchscreen controller then measures the frequency variations to ascertain the coordinates of the person’s touch. This glass overlay has a coating that stores the charge deposited over its surface electrically. It will not operate with either a gloved hand or with a mechanical stylus. CAPACITIVE - Brief Specifications Subject Details Construction Top: ClearTek protective overcoat protects the sensors and increase durability. Inside: Electrode X/Y grid pattern and conductive coating. Bottom: Glass and conductive coating. Small amount of voltage is applied to the four corners for measuring X and Y coordinates of the touch point. Positional Accurancy Reported touch coordinates are within 1.0% of true position. (Based on viewing area dimensions) Touch Contact Requirements 3 ms for finger input. Enduarance Tested More than 225 million touches in one location without noticable degradation to the surface. Cleaning Water, isopropyl, alcohol, and similar non-abrasive cleaners. Liquid Resistance Liquids on screen does not impede touchscreen performance. Light Transmission Up to 88% at 550 nm; dependant on specific surface finish chosen. Resistive Touchscreen It generally uses a display overlay composed of layers, each with a conductive coating on the interior surface. Special separator “dots” are distributed evenly across the active area and separate the conductive interior layers. The pressure from using either a mechanical stylus or finger produces an internal electrical contact at the “action point” which supplies the controller with vertical and horizontal analog voltages for data input. The resistive touchscreens are anti-glare to reduce reflective shine intensity, which will slightly diffuse the light output throughout the screen. Resistive technology activation can be initiated by; a gloved hand, fingernail, mechanical stylus or an ungloved finger. RESISTIVE - Brief Specifications Subject Details Construction Top: Polyester with outside hard-surface coating with clear or anti-glare finish. Inside: Transparent conductive coating. Bottom: Glass substrate with uniform conductive coating. Top and bottom layers separated by separator dots. Positional Accurancy Standard deviation of error is less than +- 0.080-inch (2mm). Touch Activation Force Typically 57 to 133 g Expected Life Performance More than 35 million touches in one location without failure, using a stylus similar to a finger. Chemical Resistance (Exposed for one hour) Acetone, Ammonia-based glass cleaners, Common food and beverages, Hexane, Isopropyl alcohol, Methylene chloride, Methyl ethyl ketone, Mineral spirits, Turpentine Light Transmission Typically 75% over visible light spectrum. Touchscreen IND100110-1 12 INB100014-1 (Rev 19) Touchscreen products Location of Touchscreen label Information about the factory mounted touchscreen and what driver to use, are indicated on the dedicated label. The location is shown in this illustration together with label example. (This label is attached on products produced after September 2006) TOUCH SCREEN This product is equipped with a Resistive Touch Screen: Manufacturer : ELO TouchSystems Touch Controller : 2210 Serial Controller P/N 055165-000 Driver Download : www.elotouch.com VSD100564-2210 Product Information Manufacture: Product: Jakob Hatteland Display 19 Inch NORWAY TFT 100W Product type: # JH 19T01MMD-A1-831 Serial Number 115VAC/50-60Hz 230VAC/50-60Hz TOUCH SCREEN This product is equipped with a Resistive Touch Screen: Manufacturer : ELO TouchSystems Touch Controller : 2210 Serial Controller P/N 055165-000 Driver Download : www.elotouch.com VSD100564-2210 Example label only Up-2-date touchscreen drivers and documentation: Please visit the 3rd party website as indicated on the label. You can also visit our website www.hatteland.com to view the full list of our models with touchscreen. Before using the touchscreen, it should be calibrated for your system. Please install the 3rd party software and use the Calibrate function from there. Touchscreen IND100110-3 13 INB100014-1 (Rev 19) 14 INB100014-1 (Rev 19) Installation 15 INB100014-1 (Rev 19) General Installation Recommendations Installation and mounting 1. Most of our products are intended for various methods of installation or mounting (panel mounting, bracket mounting, ceiling/wall mounting etc.); for details, please see the relevant mechanical drawings. 2. Adequate ventilation is a necessary prerequisite for the life of the product. The air inlet and outlet openings must definitely be kept clear; coverings which restrict ventilation are not permissible. 3. Do not install the unit in a horizontal position (laying down), as this will cause heat to build up inside the display which will damage the LCD Panel. To prevent this problem we recommend installing the unit in a vertical position (±30 degrees) to improve the airflow through the unit. 4. Exposure to direct sunlight can cause a considerable increase in the temperature of the unit, and might under certain circumstances lead to overtemperature. This point should already be taken into consideration when the bridge equipment is being planned (sun shades, distance from the windows, ventilation, etc.) 5. Space necessary for ventilation, for cable inlets, for the operating procedures and for maintenance, must be provided. 6. To further improve the cooling of the unit we recommend installing Cooling Fans underneath blowing upwards into the unit air inlet. This may be required in high temperature applications and also when there is reason to expect temperature problems due to non-optimal way of mounting(Ref.2-5). 7. If the push buttons of the product are not illuminated, an external, dimmable illumination (IEC 60945, 6.5.c, e.g. Goose neck light is required for navigational use. 8. Information about necessary pull-relievers for cables is given in the installation drawings. Attention must be paid to this information so that cable breaks will not occur, e.g. during service work. Brightness knob precaution Please be aware of the risk of breaking or bending the brightness knob. The brightness knob should be free of any obstruction. Installation IND100078-10 16 INB100014-1 (Rev 19) General Installation Recommendations Ergonomics 1. Adjust the unit height so that the top of the screen is at or below eye level. Your eyes should look slightly downwards when viewing the middle of the screen. 2. Adjust screen inclination to remain gaze angle to the centre of the screen approximately perpendicular to the line of gaze. 3. When products are to be operated both from a sitting position and from a standing position, a screen inclination of about 30° to 40° (from a vertical plane) has turned out to be favourable. 4. The brightness of displays is limited. Sunlight passing directly through the bridge windows - or its reflection - which falls upon the screen workplaces must be reduced by suitable means (negatively inclined window surfaces, Venetian blinds, distance from the windows, dark colouring of the deckhead) 5. Units in the bridge wing area must be installed or mounted by suitable alignment or bulkhead/ deckhead mounting in such a way that reflections of light from the front pane of the display are not directed into the observer’s viewing direction. 6. The use of ordinary commercial filter plates or filter films is not permitted for items of equipment that require approval (by optical effects, “aids” of that kind can suppress small radar targets, for example). General mounting instructions - The useful life of the components of all Electronics Units generally decreases with increasing ambient temperature; it is therefore advisable to install such units in air-conditioned rooms. If there are no such facilities these rooms must at least be dry, adequately ventilated and kept at a suitable temperature in order to prevent the formation of condensation inside the display unit. - With most Electronic Units, cooling takes place via the surface of the casing. The cooling must not be impaired by partial covering of the unit or by installation of the unit in a confined cabinet. - In the area of the wheel house, the distance of each electronics unit from the magnetic standard compass or the magnetic steering compass must not be less than the permitted magnetic protection distance. This distance is measured from the centre of the magnetic system of the compass to the nearest point on the corresponding unit concerned. - Units which are to be used on the bridge wing must be installed inside the “wing control console” protected against the weather. In order to avoid misting of the viewing screen, a 25 ... 50 W console-heating (power depending on the volume) is recommended. - When selecting the site of a display unit, the maximum cable lengths have to be considered. Installation IND100078-10 17 INB100014-1 (Rev 19) General Installation Recommendations - The impairment of read-out from a display screen by direct light from lamps or the sun must be avoided. Rear windows must be blacked out by means of roller blinds or Venetian blinds. - Disturbing reflections on the screen of a display caused by pilot lamps and illuminated signs must be prevented by suitable measures (screening or relocating). - When a product is being installed, the surface base or bulkhead must be checked to ensure that it is flat in order to avoid twisting of the unit when the fixing screws are tightened, because such twisting would impair mechanical functions. Any unevenness should be compensated for by means of spacing-washers. - The grounding screws of the units must be connected to the body of the ship (ground); the wire used should have a cross sectional area of at least 6 mm2. - Transportation damage, even if apparently insignificant at first glance, must immediately be examined and be reported to the freight carrier. The moment of setting-to-work of the equipment is too late, not only for reporting the damage but also for the supply of replacements. Cables Use only high quality shielded signal cables. For RGB/DVI cables use only cables with separate coax for Red, Green and Blue. Jakob Hatteland Display can supply a varity of high quality RGB/ DVI, RS232, PARALLEL, LAN and USB cables intended for this use. Cable Entries & Connectors (Marked area) - Illustration only Bottom View Back View Installation IND100078-10 18 INB100014-1 (Rev 19) General Installation Recommendations Maximum Cable Length The RGB/DVI cable should generally be kept as short as possible to provide a high quality output on the display. The maximum cable length will depend on the signal resolution and frequency, but also on the quality of the signal output from the computer. We recommend using 60Hz vertical frequency for our displays. Cables up to 10 meters generally provides good picture quality even with a 1600x1200 (UXGA) 60Hz signal. In most cases (especially with lower resolutions) even longer cables will provide a satisfactory result. This should however be tested in advance before making the decision on how far the unit can be placed from the signal source. Standard Bracket When mounting the bracket on the MMC products, USE only the provided bracket kit. Using any other or longer bolts may/or will do serious damage to components inside the product, and will void warranty! Use a Allen Wrench tool to fasten the middle bolts. Please see the Technical Drawings section in this manual for additional information. Provided kit consists of: 4 pcs of RenCol Tristar Knob Male - M6x10 mm 4 pcs of MicroPlastic - 6mm Nylon washer. 4 pcs of Bolt with shoulder washer - M6x1x20mm 4 pcs of Flat washer Mount the bracket with the center bolt and washers on each side. Mount the Tristar bolts on each side. Adjust the tilting angle and secure all bolts. Note: MMC brackets for other products vary in size. Installation IND100078-10 19 INB100014-1 (Rev 19) 20 INB100014-1 (Rev 19) Operation 21 INB100014-1 (Rev 19) Physical Overview - MMC ETX Front area of computer Power Button Front USB Connector Harddrive LED Power LED FRONT USB4 INPUT/OUTPUT: Harddrive LED (HDD LED): Brightness Reset Button Supports any USB 2.0 (480Mbps) compliant peripherals. Drivers for most USB devices are useally included in operating system or on separate installation CD’s delivered with product. USB 1.1 devices will operate in USB 1.1 mode (12 Mbps) (This HDD LED is not available on 10” and 23” models). The harddrive indication (LED) will turn orange when there occur read / write activity to / from the harddrive. Power LED & Power Button: Brightness: To turn ON the computer, press down button and release it immediately. The power indication (LED) will turn green and any operating system will automatically boot. If the computer is in standby this LED will be red. To turn OFF the computer, press down this button and hold it for 3 seconds. The operating system may require additionally tasks to be performed before computer shuts down and turns off the unit. The product features a 100% dimmable image, which means it is capable of displaying a completely black image when the brightness knob is turned fully to the left. Note: If the display is delivered with Transflective Technology, the dimming may vary depending on environment. Transflective Technology uses environment / ambient lighting to preserve / enhance the brightness, meaning such products are very suitable for viewing in direct sunlight. Reset Button: (Hard Reset) To reset the computer in case of software failure, press this button (it is mounted inside, to access it use a screwdriver or a pen), This reset button is a hard reset which means the operating system will NOT be warned. Using this reset method may damage files and / or operating system in worst case scenarios. Precaution should be taken when using this.To perform a safe software reset, press either the power button, or use the operating system own reset functionality if possible. 22 IND100133-10 INB100014-1 (Rev 19) Physical Overview - MMC ETX Connector area of computer Power Input PCI SLOT 1 PCI SLOT 2 COM4, COM2 COM3, COM1 Network GigaBitLAN & LAN RGB OUT Parallel (LPT) PS/2 Mouse PS/2 Keyboard Compact Flash Reader USB 1,2,3 NOTE: Available connectors / locations (may) vary depending on model ! PCI Slots 1&2: (Not available on all models!) COM1,2,3,4 Serial Ports INPUT/OUTPUT: Network INPUT/OUTPUT: RGB OUTPUT: LPT1 Parallel Port INPUT/OUTPUT: Supports PCI (Short Length / Standard Profile) card in two available slots. These PCI cards are normally installed from factory or returned to factory for upgrading if needed. Note that warranty will be void if you install PCI cards yourselves. In order to mount PCI cards, the chassis of the unit must be removed, thus making warranty void as the warranty sticker would have to be broken. The PCI slots are not available on all MMC ETX models, due to space restrictions. Supports RS232 / RS422 / RS485 using D-SUB 9P Male connectors. Fasten the cable to the connector using the provided screws on the cable housing itself. (Factory default is RS232 only) Supports 10/100Mbps Ethernet (LAN) and 10/100/1000Mbps Ethernet (GBLAN). Suitable for twisted pair cables CAT.5E. Make sure the network cable connector ”clicks” into the RJ-45 connector. Will output a clone signal from the computer for use with external display or monitor. Connects via a High Density D-SUB 15P Female connector. Fasten the cable to the connector using the provided screws on the cable housing itself. Standard LPT1 Printer/Parallel (SPP/EPP/ECP) port using a D-SUB 25P Female connector. Fasten the cable to the connector using the provided screws on the cable housing itself. 23 IND100133-10 INB100014-1 (Rev 19) Physical Overview - MMC ETX PS/2 Keyboard and PS/2 Mouse INPUTS: Connect the PS/2 keyboard cable to the PS/2 5P Connector (female) marked with KEYBOARD. Connect the PS/2 mouse cable to the PS/2 5P Connector (female) marked with MOUSE. CompactFlash Reader: USB1,2,3 INPUT/OUTPUT: CompactFlash Reader supports Type I & II cards. Insert the card gently into the slot with the logo facing towards the TFT display (only when the unit is off). The card is removed by pressing the EJECT button next to the card slot. A wide range of card sizes are supported. NOTE: DO NOT ATTEMPT TO REMOVE THE FLASH CARD WHILE THE UNIT IS OPERATING! This is because the CF Slot has been configured to operate as a IDE device. If the Flash Card is removed from the slot while the unit is on, data may be lost or partly corrupted. Supports any USB1.1 (12Mbps) or USB2.0* (480Mbps) compliant peripherals. Drivers for most USB devices are useally included in operating system or on separate installation CD’s delivered with product. USB 1.1 devices will operate in USB 1.1 mode (12 Mbps) *Note: USB2.0 may not be supported on all MMC ETX models. Please review the specifications. Power INPUT: (AC or DC Model) AC MODEL ONLY: The internal AC power module supports both 115VAC/60Hz and 230/50Hz power input using a standard IEC European power plug. DC MODEL ONLY: Secure the cables (check polarity!) to the screw terminal. The internal DC power module supports 24 VDC. 24 IND100133-10 INB100014-1 (Rev 19) Specifications 25 INB100014-1 (Rev 19) Specifications - JH 10T08 MMC Note: All specifications are subject to change without prior notice! TECHNICAL DESCRIPTION MECHANICAL DESCRIPTION TFT Technology: Physical Dimensions: • 10.4 inch viewable image size • Active Matrix, Thin Film Transistor (TFT) • RGB vertical stripe • 339 (W) x 256 (H) x 91 (D) mm • Weight: 7 kg (approx) User Controls: TFT Characteristics: • • • • • • • • On front bezel: • Power On/Off (push button) • Brightness Control • Power LED Reset button Pixel number Pixel pitch (RGB) Response Time Contrast Ratio Light Intensity Viewable Angle : 800 x 600 : 0.264 (H) x 0.264 (V) mm : 10 ms (typical), “black” to “white” : 500:1 (typical) : 400 cd/m2 (typical) : 40 deg. (Up), 60 deg. (Down/Left/Right) : (@ CR > 10) Active Display Area : 211.2 (H) x 158.4 (V) mm Max Colors : 262,144 (6-bit max) Behind hatch: • USB 2.0 connector Environmental Considerations: • Operating • Storage • IP Rating Computer Specifications: • • • • • • • • • • • • • • • • • • • Installed OS : Processor : Cache / PCI Clock : System Chipset : BIOS : PC/104 Slot : Memory Slot : Graphics Chip : IDE Controller : Storage : Compact Flash : Parallel Port (LPT) : Primary Ethernet : Secondary Ethernet : Serial Ports : USB Ports : Keyboard/Mouse : Supported TFT Res. : RGB OUT Res : None, please specify when ordering Intel® Pentium®M 1.1GHz, Low Voltage 1MB Level 2 Cache / 400 MHz BUS Intel® 82855GME Phoenix 2Mbit Flash, Supports ACPI 1 x PC/104 with ISA Support 1 x SODIMM with ECC, from 256MB->1GB Intel® 82855GME (Integrated/250MHz) 1 x IDE Ports, Ultra DMA33/66/100 1 x Automotive 30GB, 2.5" IDE, 4200 RPM 1 x CF Socket with Eject (Type I & II) 1 x EPP/ECP Port 1 x 10/100 Mbps 1 x 10/100/1000 Mbps 4 x RS232/RS422/RS485 (fully isolated)* 4 x USB (2.0 compliant, 480Mbps) 2 x PS/2 From 640 x 480 up to 2048 x 1536** From 640 x 480 up to 1600 x 1200 Safety Considerations: Even although the test conditions for bridge units provide for a maximum operating temperature of 55°C, continuous operation of all electronic components should, if possible, take place at ambient temperatures of only 25°C. This is a necessary prerequisite for long life and low service costs. Input/Output Connectors: Function Back side Inside Front Ethernet Lan/GBLan 2 x RJ-45 PC/104 Slot 1 x PC/104 Slot Keyboard 1 x PS/2 Mouse 1 x PS/2 Compact Flash 1 x CF Socket COM 1 1 x DB9M COM 2 1 x DB9M COM 3 1 x DB9M COM 4 1 x DB9M LPT1 1 x DB25F USB2.0 3 x USB 1 x USB AC Power Std IEC inlet (Odd version models) DC Power DC Screw terminal (Even version models) RGB Out 1 x HD-15F Line In/Out 3.5mm mini jack (depends on model) Mic In 3.5mm mini jack (depends on model) * only in RS422/485 mode ** Optimal 1:1 resolution and recommended is 800 x 600 @ 60 Hz. ** If resolutions is set above 1:1, desktop scrolling mode will be used. Power Specifications: Power Supply Options: • 115 & 230VAC - 50/60Hz • 24 VDC : Model JH 10T08 MMC A1 : Model JH 10T08 MMC A2 Available Mechanical Options: Power Consumption: • Operating : 100W (max) (Configuration depending) : 65W (typ) (Max backlight & high CPU load) Accessories: • JH 10TSV : Sun visor * • JH 10TBRMMC : Bracket * • Touch Screen ** Available Technical Options: * Option: Standard or custom logo and color ** Option: Factory mounted Miscellaneous Options: • Audio AC97 Compliant : Line In/Out, Mic In, Speaker Out • Processor : Up to 2.0 GHZ • Memory : Up to 1GB Compass Safe Distance: JH 10T08 MMC Standard: 55cm APPROVALS : Temperature -15 deg. C to +55 deg. C Humidity 30% to 90% (non condensing) : Temperature -20 deg. C to +70 deg. C Humidity 10% to 90% (non condensing) : EN60529 (IP66) (Applies for flush mounting) Steering: 40cm & CERTIFICATES This product have been tested / type approved by the following classification societies: (1=AC Version, 2=DC Version) EN60945 4th (IEC945 4th) IACS E10 DNV - Det Norske Veritas (1,2) ABS - American Bureau of Shipping (1,2) 26 IND100129-70 BV - Bureau Veritas (1,2) ClassNK - Nippon Kaiji Kyokai (1,2) INB100014-1 (Rev 19) Specifications - JH 15T05 MMC Note: All specifications are subject to change without prior notice! TECHNICAL DESCRIPTION MECHANICAL DESCRIPTION TFT Technology: Physical Dimensions: • 15.0 inch viewable image size • Color Active Matrix LCD Module • a-Si Thin Film Transistor (TFT) • 412 (W), 345 (H), 83.5 (D) mm • Weight: 8 kg (approx) TFT Characteristics: User Controls: • • • • • • • • On front bezel: • Power On/Off (push button) • Brightness Control • Power LED, HD Led and Reset button Pixel number Pixel pitch (RGB) Response Time Contrast Ratio Light Intensity Viewable Angle : 1024 x 768 : 0.297 (H) x 0.297 (V) mm : 25 ms (typical), “black” to “white” : 400:1 (typ) : 250 cd/m2 (typical) : +/- 85 deg. (min) (Up/Down/Left/Right) : (@ CR > 10) Active Display Area : 304.1 (H) x 228.1 (V) mm Max Colors : 16.7 millions Behind hatch: • USB 2.0 connector(s) Environmental Considerations: • Operating • Storage • IP Rating Computer Specifications: • • • • • • • • • • • • • • • • • • • Installed OS : Processor : Cache / PCI Clock : System Chipset : BIOS : PC/104 Slot : Memory Slot : Graphics Chip : IDE Controller : Storage : Compact Flash : Parallel Port (LPT) : Primary Ethernet : Secondary Ethernet : Serial Ports : USB Ports : Keyboard/Mouse : Supported TFT Res. : RGB OUT Res : None, please specify when ordering Intel® Pentium®M 1.1GHz, Low Voltage 1MB Level 2 Cache / 400 MHz BUS Intel® 82855GME Phoenix 2Mbit Flash, Supports ACPI 1 x PC/104 with ISA Support 1 x SODIMM with ECC, from 256MB->1GB Intel® 82855GME (Integrated/250MHz) 1 x IDE Ports, Ultra DMA33/66/100 1 x Automotive 30GB, 2.5" IDE, 4200 RPM 1 x CF Socket with Eject (Type I & II) 1 x EPP/ECP Port 1 x 10/100 Mbps 1 x 10/100/1000 Mbps 4 x RS232/RS422/RS485 (fully isolated)* 4 x USB (2.0 compliant, 480Mbps) 2 x PS/2 From 640 x 480 up to 2048 x 1536** From 640 x 480 up to 1600 x 1200 Safety Considerations: Even although the test conditions for bridge units provide for a maximum operating temperature of 55°C, continuous operation of all electronic components should, if possible, take place at ambient temperatures of only 25°C. This is a necessary prerequisite for long life and low service costs. Input/Output Connectors: Function Back side Inside Front Ethernet Lan/GBLan 2 x RJ-45 PC/104 Slot 1 x PC/104 Slot Keyboard 1 x PS/2 Mouse 1 x PS/2 Compact Flash 1 x CF Socket COM 1 1 x DB9M COM 2 1 x DB9M COM 3 1 x DB9M COM 4 1 x DB9M LPT1 1 x DB25F USB2.0 3 x USB 1 x USB AC Power Std IEC inlet (Odd version models) DC Power DC Screw terminal (Even version models) RGB Out 1 x HD-15F TV Out Composite RCA (depends on model) Line In/Out 3.5mm mini jack (depends on model) Mic In 3.5mm mini jack (depends on model) * only in RS422/485 mode ** Optimal 1:1 resolution and recommended is 1024 x 768 @ 60 Hz. ** If resolutions is set above 1:1, desktop scrolling mode will be used. Power Specifications: Power Supply Options: • 115 & 230VAC - 50 / 60Hz • 24 VDC : Model JH 15T05 MMC A1 : Model JH 15T05 MMC A2 Available Mechanical Options: Power Consumption: • Operating : 100W (max) (Configuration depending) : 65W (typ) (Max backlight & high CPU load) Accessories: • JH 15TSV : Sun visor * • JH 15TBRMMC : Bracket * • Touch Screen ** Available Technical Options: Miscellaneous Options: • Audio AC97 Compliant • TV-Out • Processor • Memory : : : : * Option: Standard or custom logo and color ** Option: Factory mounted Line In/Out, Mic In, Speaker Out 1 x Composite (Depends on model) Up to 2.0 GHZ Up to 1GB Compass Safe Distance: JH 15T05 MMC Standard: 125cm APPROVALS : Temperature -15 deg. C to +55 deg. C Humidity 30% to 90% (non condensing) : Temperature -20 deg. C to +70 deg. C Humidity 10% to 90% (non condensing) : EN60529 (IP66) (Applies for flush mounting) Steering: 80cm & CERTIFICATES This product have been tested / type approved by the following classification societies: (1=AC Version, 2=DC Version) EN60945 4th (IEC945 4th) (1,2) IACS E10 (1,2) ABS - American Bureau of Shipping (1,2) ClassNK - Nippon Kaiji Kyokai (1,2) GL - Germanischer Lloyd (1,2) LRS - Lloyd's Register of Shipping (1,2) 27 IND100129-42 DNV - Det Norske Veritas (1,2) BV - Bureau Veritas (1,2) RS - Russian Maritime Register of Shipping (1,2) INB100014-1 (Rev 19) Specifications - JH 19T02 MMC Note: All specifications are subject to change without prior notice! TECHNICAL DESCRIPTION MECHANICAL DESCRIPTION TFT Technology: Physical Dimensions: • 19.0 inch viewable image size • Active Matrix, Thin Film Transistor (TFT) • MVA Premium™ Technology • 483 (W), 444 (H), 100 (D) mm • Weight: 11 kg (approx) TFT Characteristics: User Controls: • • • • • • • • On front bezel: • Power On/Off (push button) • Brightness Control • Power LED, HD Led and Reset button Pixel number Pixel pitch (RGB) Response Time Contrast Ratio Light Intensity Viewable Angle : 1280 x 1024 : 0.294 (H) x 0.294 (V) mm : 15 ms (typical), “black” to “white” : 700:1 (typ) : 300 cd/m2 (typical) : +/- 85 deg. (min) (Up/Down/Left/Right) : (@ CR > 10) Active Display Area : 376.32 (H) x 301.056 (V) mm Max Colors : 16.7 millions Behind hatch: • USB 2.0 connector Environmental Considerations: • Operating • Storage • IP Rating Computer Specifications: • • • • • • • • • • • • • • • • • • • • Installed OS : Processor : Cache / PCI Clock : System Chipset : BIOS : PCI Slot (Limited height) : PC/104 Slot : Memory Slot : Graphics Chip : IDE Controller : Storage : Compact Flash : Parallel Port (LPT) : Primary Ethernet : Secondary Ethernet : Serial Ports : USB Ports : Keyboard/Mouse : Supported TFT Res. : RGB OUT Res : None, please specify when ordering Intel® Pentium®M 1.1GHz, Low Voltage 1MB Level 2 Cache / 400 MHz BUS Intel® 82855GME Phoenix 2Mbit Flash, Supports ACPI 2 x Short Length, STD Profile, 32Bit PCI 1 x PC/104 with ISA Support 1 x SODIMM with ECC, from 256MB->1GB Intel® 82855GME (Integrated/250MHz) 1 x IDE Ports, Ultra DMA33/66/100 1 x Automotive 30GB, 2.5" IDE, 4200 RPM 1 x CF Socket with Eject (Type I & II) 1 x EPP/ECP Port 1 x 10/100 Mbps 1 x 10/100/1000 Mbps 4 x RS232/RS422/RS485 (fully isolated)* 4 x USB (2.0 compliant, 480Mbps) 2 x PS/2 From 640 x 480 up to 2048 x 1536** From 640 x 480 up to 1600 x 1200 Safety Considerations: Even although the test conditions for bridge units provide for a maximum operating temperature of 55°C, continuous operation of all electronic components should, if possible, take place at ambient temperatures of only 25°C. This is a necessary prerequisite for long life and low service costs. Input/Output Connectors: Function Back side Inside Front Ethernet Lan/GBLan 2 x RJ-45 PCI Slot (Limited height) 2 x Short/STD PC/104 Slot 1 x PC/104 Slot Keyboard 1 x PS/2 Mouse 1 x PS/2 Compact Flash 1 x CF Socket COM 1 1 x DB9M COM 2 1 x DB9M COM 3 1 x DB9M COM 4 1 x DB9M LPT1 1 x DB25F USB2.0 3 x USB 1 x USB AC Power Std IEC inlet (Odd version models) DC Power DC Screw terminal (Even version models) RGB Out 1 x HD-15F TV Out Composite RCA (depends on model) Line In/Out 3.5mm mini jack (depends on model) Mic In 3.5mm mini jack (depends on model) Speaker Out 3.5mm mini jack (depends on model) * only in RS422/485 mode ** Optimal 1:1 resolution and recommended is 1280 x 1024 @ 60 Hz. ** If resolutions is set above 1:1, desktop scrolling mode will be used. Power Specifications: Power Supply Options: • 115 & 230VAC - 50 / 60Hz • 24 VDC : Model JH 19T02 MMC A1 : Model JH 19T02 MMC A2 Power Consumption: • Operating : 100W (max) (Configuration depending) : 75W (typ) (Max backlight & high CPU load) Available Mechanical Options: Accessories: • JH 19TSV : Sun visor * • JH 19TBRMMC-B1 : Bracket* • Touch Screen ** Available Technical Options: Miscellaneous Options: • Audio AC97 Compliant • TV-Out • Processor • Memory : : : : Line In/Out, Mic In, Speaker Out 1 x Composite (Depends on model) Up to 2.0 GHZ Up to 1GB Compass Safe Distance: JH 19T02 MMC Standard: 75cm APPROVALS : Temperature -15 deg. C to +55 deg. C Humidity 30% to 90% (non condensing) : Temperature -20 deg. C to +70 deg. C Humidity 10% to 90% (non condensing) : EN60529 (IP66) (Applies for flush mounting) * Option: Standard or custom logo and color ** Option: Factory mounted * Option: See separate datasheet for bracket drawings. Steering: 55cm & CERTIFICATES This product have been tested / type approved by the following classification societies: (1=AC Version, 2=DC Version) EN60945 4th (IEC945 4th) (1,2) IACS E10 (1,2) ABS - American Bureau of Shipping (1,2) DNV - Det Norske Veritas (1,2) EN61174 (IEC1174) - Bundesamt für Seeschiffahrt und Hydrographie (BSH) (1) GL - Germanischer Lloyd (1,2) BV - Bureau Veritas (1,2) LRS - Lloyd's Register of Shipping (1,2) ClassNK - Nippon Kaiji Kyokai (1,2) RS - Russian Maritime Register of Shipping (1,2) 28 IND100129-43 INB100014-1 (Rev 19) Specifications - JH 23T02 MMC Note: All specifications are subject to change without prior notice! TECHNICAL DESCRIPTION MECHANICAL DESCRIPTION TFT Technology: Physical Dimensions: • 23.1 inch viewable image size • Thin Film Transistor (TFT), MVA Premium™ Technology • 584 (W), 534 (H), 105 (D) mm • Weight: 18 kg (approx) TFT Characteristics: • • • • • • • • User Controls: Pixel number Pixel pitch (RGB) Response Time Contrast Ratio Light Intensity Viewable Angle : 1600 x 1200 : 0.294 (H) x 0.294 (V) mm : 20 ms (typical), “black” to “white” : 600:1 (typ) : 250 cd/m2 (typical) : +/- 85 deg. (min) (Up/Down/Left/Right) : (@ CR > 10) Active Display Area : 470.4 (H) x 352.8 (V) mm Max Colors : 16.7 millions (depending on graphics card) On front bezel: • Power On/Off (push button) • Brightness Control • Power LED and Reset button Behind hatch: • USB 2.0 connector Environmental Considerations: Computer Specifications: • • • • • • • • • • • • • • • • • • • • Installed OS : Processor : Cache / PCI Clock : System Chipset : BIOS : PCI Slot (Limited height) : PC/104 Slot : Memory Slot : Graphics Chip : IDE Controller : Storage : Compact Flash : Parallel Port (LPT) : Primary Ethernet : Secondary Ethernet : Serial Ports : USB Ports : Keyboard/Mouse : Supported TFT Res. : RGB OUT Res : • Operating • Storage • IP Rating None, please specify when ordering Intel® Pentium®M 1.1GHz, Low Voltage 1MB Level 2 Cache / 400 MHz BUS Intel® 82855GME Phoenix 2Mbit Flash, Supports ACPI 2 x Short Length, STD Profile, 32Bit PCI 1 x PC/104 with ISA Support 1 x SODIMM with ECC, from 256MB->1GB Intel® 82855GME (Integrated/250MHz) 1 x IDE Ports, Ultra DMA33/66/100 1 x Automotive 30GB, 2.5" IDE, 4200 RPM 1 x CF Socket with Eject (Type I & II) 1 x EPP/ECP Port 1 x 10/100 Mbps 1 x 10/100/1000 Mbps 4 x RS232/RS422/RS485 (fully isolated)* 4 x USB (2.0 compliant, 480Mbps) 2 x PS/2 From 640 x 480 up to 2048 x 1536** From 640 x 480 up to 1600 x 1200 Safety Considerations: Even although the test conditions for bridge units provide for a maximum operating temperature of 55°C, continuous operation of all electronic components should, if possible, take place at ambient temperatures of only 25°C. This is a necessary prerequisite for long life and low service costs. Input/Output Connectors: Function Back side Inside Front Ethernet Lan/GBLan 2 x RJ-45 PCI Slot 2 x Short/STD PC/104 Slot 1 x PC/104 Slot Keyboard 1 x PS/2 Mouse 1 x PS/2 Compact Flash 1 x CF Socket COM 1 1 x DB9M COM 2 1 x DB9M COM 3 1 x DB9M COM 4 1 x DB9M LPT1 1 x DB25F USB2.0 3 x USB 1 x USB AC Power Std IEC inlet (Odd version models) DC Power DC Screw terminal (Even version models) RGB Out 1 x HD-15F TV Out Composite RCA (depends on model) Line In/Out 3.5mm mini jack (depends on model) Mic In 3.5mm mini jack (depends on model) * only in RS422/485 mode ** Optimal 1:1 resolution and recommended is 1600 x 1200 @ 60 Hz. ** If resolutions is set above 1:1, desktop scrolling mode will be used. Power Specifications: Power Supply Options: • 115 & 230VAC - 50 / 60Hz : Model JH 23T02 MMC A1 • 24 VDC : Model JH 23T02 MMC A2* *(tests pending) Power Consumption: • Operating : 100W (max) (Configuration depending) : 75W (typ) (Max backlight & high CPU load) Available Mechanical Options: Accessories: • JH 23TSV : Sun visor * • JH 23TBRMMC-B1 : Bracket* • Touch Screen ** Available Technical Options: Miscellaneous Options: • Audio AC97 Compliant • TV-Out • Processor • Memory : : : : Line In/Out, Mic In, Speaker Out 1 x Composite (Depends on model) Up to 2.0 GHZ Up to 1GB Compass Safe Distance: JH 23T02 MMC Standard: 175cm APPROVALS : Temperature -15 deg. C to +55 deg. C Humidity 30% to 90% (non condensing) : Temperature -20 deg. C to +70 deg. C Humidity 10% to 90% (non condensing) : EN60529 (IP66) (Applies for flush mounting) * Option: Standard or custom logo and color * Option: See separate datasheet for bracket specifications. ** Option: Factory mounted Steering: 140cm & CERTIFICATES This product have been tested / type approved by the following classification societies: (1=AC Version, 2=DC Version) EN60945 4th (IEC945 4th) DNV - Det Norske Veritas (1) IACS E10 RS - Russian Maritime Register of Shipping (1,2) ClassNK - Nippon Kaiji Kyokai (1,2) 29 IND100129-47 BV - Bureau Veritas (1,2) ABS - American Bureau of Shipping (1,2) INB100014-1 (Rev 19) 30 INB100014-1 (Rev 19) Technical Drawings 31 INB100014-1 (Rev 19) Due to dimensions without decimals, the tolerance on drawings is +/- 1mm (For accurate measurements, measure in AutoCAD) Technical drawings (.DWG format) are found on our internet site: http://www.hatteland.com Technical Drawings - JH 10T08 MMC Measurements shown in mm Standard Version IND100132-94 32 INB100014-1 (Rev 19) Due to dimensions without decimals, the tolerance on drawings is +/- 1mm (For accurate measurements, measure in AutoCAD) Technical drawings (.DWG format) are found on our internet site: http://www.hatteland.com Technical Drawings - JH 15T05 MMC Measurements shown in mm Standard Version IND100132-62 33 INB100014-1 (Rev 19) Due to dimensions without decimals, the tolerance on drawings is +/- 1mm (For accurate measurements, measure in AutoCAD) Technical drawings (.DWG format) are found on our internet site: http://www.hatteland.com Technical Drawings - JH 19T02 MMC Measurements shown in mm Standard Version IND100132-63 34 INB100014-1 (Rev 19) Due to dimensions without decimals, the tolerance on drawings is +/- 1mm (For accurate measurements, measure in AutoCAD) Technical drawings (.DWG format) are found on our internet site: http://www.hatteland.com Technical Drawings - JH 19T02 MMC Bracket Version IND100132-63 35 INB100014-1 (Rev 19) Due to dimensions without decimals, the tolerance on drawings is +/- 1mm (For accurate measurements, measure in AutoCAD) Technical drawings (.DWG format) are found on our internet site: http://www.hatteland.com Technical Drawings - JH 23T02 MMC Measurements shown in cm Standard Version IND100132-68 36 INB100014-1 (Rev 19) Due to dimensions without decimals, the tolerance on drawings is +/- 1mm (For accurate measurements, measure in AutoCAD) Technical drawings (.DWG format) are found on our internet site: http://www.hatteland.com Technical Drawings - JH 23T02 MMC Bracket Version IND100132-68 37 INB100014-1 (Rev 19) 38 INB100014-1 (Rev 19) Technical Drawings - Accessories 39 INB100014-1 (Rev 19) NUMBER 1 6 2 2 2 4 POS 1 2 3 4 5 IND100132-78 6 Rencol Tristar Knob Bolt DIN7991 Shoulder Washer Flat Washer Nylon Washer Microplastic Suspension Bracket DESCRIPTION M6X10 mm M6X1X20 6 mm 6 mm 6mm SIZE Technical Drawings - Accessories MMC Bracket 40 INB100014-1 (Rev 19) Appendixes 41 INB100014-1 (Rev 19) Pin Assignments - Common Connectors Note: Not all connectors may be available on your specific product. This depends on the amount of additional hardware installed from factory, or customized solutions. These pin assignments are for the common connectors used. Connectors are seen from users Point Of View (POV). Pin Assignments - RJ45 10/100 LAN 1 2 3 4 5 6 7 8 Pin Assignments - USB TYPE A Pin 4: Ground Pin 2: Negative Data Pin 3: Positive Data Pin 1: VCC +5V Pin 01 - TDP Pin 02 - TDN Pin 03 - RDP Pin 04 - NC Pin 05 - NC Pin 06 - RDN Pin 07 - NC Pin 08 - NC Transmit Differential Pair (Positive) Transmit Differential Pair (Negative) Receive Differential Pair (Positive) Not Connected Not Connected Receive Differential Pair (Negative) Not Connected Not Connected Use category 5 - twisted pair cable Pin Assignments - RJ45 10/100/1000 GBLAN 1 2 3 4 5 6 7 8 Pin Assignments - USB TYPE B Pin 1: VCC +5V Pin 2: Negative Data Pin 4: Ground Pin 3: Positive Data Pin Assignments - 5P PS/2 MOUSE Pin 6: Not Connected Pin 5: Mouse Clock Pin 3: Ground Pin 4: Vcc +5V Pin 2: Not Connected Pin 01 - D0P Pin 02 - D0N Pin 03 - D1P Pin 04 - D2P Pin 05 - D2N Pin 06 - D1N Pin 07 - D3P Differential Pair 0 (Positive) Differential Pair 0 (Negative) Differential Pair 1 (Positive) Differential Pair 2 (Positive) Differential Pair 2 (Negative) Differential Pair 1 (Negative) Differential Pair 3 (Positive) Pin Ass. - 5P PS/2 KEYBOARD+MOUSE Combined Pin 6: Mouse Clock Pin 4: Vcc +5V Pin Assignments - 15P HD RGB VGA 5 4 3 2 1 10 9 8 7 6 Pin 2: Mouse Data Pin 4: Vcc +5V 15 14 13 12 11 Red, analog Green, analog Blue, analog Reserved for monitor ID bit 2 (grounded) Digital ground Analog ground red Analog ground green Analog ground blue +5V power supply for DDC (optional) Digital ground Reserved for monitor ID bit 0 (grounded) DDC serial data Horizontal sync or composite sync, input Vertical sync, input DDC serial clock Pin Assignments - 9P Serial COM RS232 5 Pin 5: Keyboard Clock Pin 3: Ground Pin 1: Keyboard Data Pin Assignments - 5P PS/2 KEYBOARD Pin 6: Not Connected Pin 01 Pin 02 Pin 03 Pin 04 Pin 05 Pin 06 Pin 07 Pin 08 Pin 09 Pin 10 Pin 11 Pin 12 Pin 13 Pin 14 Pin 15 Pin 1: Mouse Data Pin 2: Not Connected Pin 5: Keyboard Clock Pin 3: Ground Pin 1: Keyboard Data Pin Assignments - FIREWIRE IEEE-1394 1 3 5 Pin 01 - VCC Pin 02 - GND Pin 03 - TPBPin 04 - TPB+ Pin 05 - TPAPin 06 - TPA+ 2 4 6 Power Grounding for power and inner cable shield Twisted Pair B- Receive Strobe, Transmit Data Twisted Pair B+ Receive Strobe, Transmit Data Twisted Pair A- Transmit Strobe, Receive Data Twisted Pair A+ Transmit Strobe, Receive Data 4 3 2 1 9 8 7 6 Pin 01 - DCD Pin 02 - SIN Pin 03 - SOUT Pin 04 - DTR Pin 05 - GND Pin 06 - DSR Pin 07 - RTS Pin 08 - CTS Pin 09 - RI Data Carry Detect Serial In or Receive Data Serial Out or Transmit Data Data Terminal Ready Ground Data Set Ready Request To Send Clear To Send Ring Indicate Appendix IND100241-2 42 INB100014-1 (Rev 19) Pin Assignments - Common Connectors Pin Assignments - 25P Parallel 13 12 11 10 9 8 7 6 5 4 3 2 1 25 24 23 22 21 20 19 18 17 16 15 14 Pin 01 - STROBE Pin 02 - DATA0 Pin 03 - DATA1 Pin 04 - DATA2 Pin 05 - DATA3 Pin 06 - DATA4 Pin 07 - DATA5 Pin 08 - DATA6 Pin 09 - DATA7 Pin 10 - ACK Pin 11 - BUSY Pin 12 - PE Pin 13 - SELECT Pin 14 - AUTO FEED Pin 15 - ERR# Pin 16 - INIT# Pin 17 - SLIN# Pin 18 - GND Pin 19 - GND Pin 20 - GND Pin 21 - GND Pin 22 - GND Pin 23 - GND Pin 24 - GND Pin 25 - GND This signal indicates to the printer that data at PD7..0 are valid. Parallel data bus from PC board to printer. The data line are able to operate in PS/2 compatible bi-directional mode. Same as Pin 02 Same as Pin 02 Same as Pin 02 Same as Pin 02 Same as Pin 02 Same as Pin 02 Same as Pin 02 Signal from printer indicating that the printer has received the data and is ready to accept further data. Signal from printer indicating that the printer cannot accept further data. Signal from printer indicating that the printer is out of paper. Signal from printer to indicate that the printer is selected. This active low output causes the printer to add a line feed after each line printed. Signal from printer indicating that an error has been detected. This active low output initialises (resets) the printer. Signal to select the printer sent from CPU board to printer. Ground Ground Ground Ground Ground Ground Ground Ground Pin Assignments - 24P DVI-D & DVI-I 1 2 3 4 5 6 7 8 C1 C2 9 10 11 12 13 14 15 16 C5 17 18 19 20 21 22 23 24 C3 C4 Pin 01 Pin 02 Pin 03 Pin 04 Pin 05 Pin 06 Pin 07 Pin 08 Pin 09 Pin 10 Pin 11 Pin 12 Pin 13 Pin 14 Pin 15 Pin 16 Pin 17 Pin 18 Pin 19 Pin 20 Pin 21 Pin 22 Pin 23 Pin 24 Pin C1 Pin C2 Pin C3 Pin C4 Pin C5 T.M.D.S. Data2 - (Digital - RED link 1) T.M.D.S. Data2 + (Digital + RED link 1) T.M.D.S. Data2/4 Shield T.M.D.S. Data4 - (Digital - GREEN link 2) T.M.D.S. Data4 + (Digital + GREEN link 2) DDC Clock DDC Data Analog Vertical Sync (DVI-I only) T.M.D.S. Data1 - (Digital - GREEN link 1) T.M.D.S. Data1 + (Digital + GREEN link 1) T.M.D.S. Data1/3 Shield T.M.D.S. Data3 - (Digital - BLUE link 2) T.M.D.S. Data3 + (Digital + BLUE link 2) +5V Power (for standby mode) Ground (for +5V and analog sync) Hot Plug Detect T.M.D.S. Data0 - (Digital - BLUE link 1) and digital sync. T.M.D.S. Data0 + (Digital + BLUE link 1) and digital sync. T.M.D.S. Data0/5 Shield T.M.D.S. Data5 - (Digital - RED link 2) T.M.D.S. Data5 + (Digital - RED link 2) T.M.D.S. Clock Shield T.M.D.S. Clock + (Digital clock + (Links 1 and 2) T.M.D.S. Clock - (Digital clock - (Links 1 and 2) Analog RED Analog GREEN Analog BLUE Analog Horizontal Sync. Analog Ground (return for RGB signals) DDC = Display Data Channel /// T.M.D.S = Transition Minimized Differential Signal /// PIN C1,C2,C3,C4 = Only present on DVI-I connectors. Additional connector pinouts may be available in third party motherboard manuals, primarly for computers only. Please see manual/drivercd delivered with your product. Appendix IND100241-2 43 INB100014-1 (Rev 19) Pin Assignments - Common Connectors (Additional) Note: These pin assignments applies for products with customer specified COM ports (factory setup). These COM ports are configurable on the motherboard located inside the product. Panel Computers: Attempting to config these yourselves, could result in warranty void as the main cover would have to be removed. Pin Assignments - 9P Serial COM RS422 5 Pin Assignments - 9P Serial COM RS485 4 3 2 1 5 9 8 7 6 Pin 01 - N/C Pin 02 - TXPin 03 - RX+ Pin 04 - N/C Pin 05 - GND Pin 06 - N/C Pin 07 - TX+ Pin 08 - RXPin 09 - N/C IND100241-3 9 8 7 6 Not Connected Transmit Data Receive Data + Not Connected Ground Not Connected Transmit Data + Receive Data Not Connected Appendix 4 3 2 1 Pin 01 - N/C Pin 02 - N/C Pin 03 - DAT+ Pin 04 - N/C Pin 05 - GND Pin 06 - N/C Pin 07 - N/C Pin 08 - DATPin 09 - N/C 44 Not Connected Not Connected Data+ Not Connected Ground Not Connected Not Connected DataNot Connected INB100014-1 (Rev 19) Basic Trouble-shooting COMMON ERRORS: (This is a generic description of possible issues for a varity of products) If for some reason there should be something wrong with the picture quality or no picture present, check the symptoms carefully and try to cure it with the hints below: NO PICTURE / LED BEHAVIOUR: If there is no light at all in the LED at the FRONT, check power cables. If the LED in front is green then check if the brightness knob is turned to the right (max brightness). If still no picture, check if there is a VGA signal on the External VGA connector. If you have a picture on the external VGA connector please look in BIOS documentation/chapter for correct display settings in BIOS. Lack of image is most likely to be caused by incorrect connection, lack of power, or wrong BIOS settings. SCROLLING / UNSTABLE IMAGE: Signal cable may not be completely connected to computer or TFT display. Check the pin assignments and signal timings of the display and your video card with respect to recommended timing and pin assignments. Make sure that the video card is compatible and that it is properly seated / installed on the computer. DISPLAY AREA IS NOT CENTERED / SIZED CORRECTLY Make sure that a supported video mode has been selected on the display, or on the video card / system. If it is impossible to position the image correctly, i.e. the image adjustment controls will not move the image far enough, then test it again using another graphics card for the PC system. This situation may occur with a custom graphics card that is not close to standard timings or if something is in the graphics line that may be affecting the signal, such as a signal splitter (please note that normally a signal splitter will not have any adverse effect). If it is impossible to change to the correct resolution/color depth, check if you have the right VGA driver installed in your system. IMAGE APPEARANCE: A faulty TFT panel can have black lines, pixel errors, failed sections, flickering or flashing image. Incorrect graphics card refresh rate, resolution or interlaced mode will probably cause the image to be the wrong size, it may scroll, flicker badly or possibly even no image is present. Sparkling on the display may be a faulty TFT panel signal cable, and it needs service attention. RGB Signal Only: Horizontal interference can usually be corrected by adjusting the PHASE (OSD menu). Vertical interference can usually be corrected by adjusting the FREQUENCY (OSD menu). DEW CONDENSATION BEHIND GLASS: Note that this problem will not occur on bonded products. For non-bonded products, do the following: Power on the TFT product and set brightness to 100%. Turn off any automatic screensavers on PC or similar. During minutes the dew will be gone. To speed up the process, use a fan heater for a reasonable time. Do not overheat the TFT product. CD-ROM FAILURE OR READ/DETECTION PROBLEMS: If the product are operated/located in a area with extreme condensation, the CD/DVD drive may not work correctly due to condensation on the read head. Keep the product on for a while until it’s reached normal operating temperature, and retry accessing discs. Otherwise, consider using USB memory sticks or alternative storage devices. NO CD-ROM AVAILABLE ON YOUR PRODUCT FOR INSTALLING DRIVERS/SOFTWARE: Please use USB memory sticks, USB Floppy drive, USB CD-Rom Drive or alternative storage devices to transfer/install software on CD-ROM-less units. Appendix IND100077-8 45 INB100014-1 (Rev 19) Declaration of Conformity We, manufacturer Jakob Hatteland Display A/S Åmsosen, N-5578 Nedre Vats, Norway declare under our sole responsibility that the JH MMD, JH MMC, JH STD, JH MIL, HT STD (Series 1) and HD MMD, HT MMC (Series 2) products is in conformity with the following standards in accordance with the EMC Directive. EN 55022 Class A - Emission EN 55024 - Immunity Signature:........................................................ Frode Grindheim Technical Director Jakob Hatteland Display A/S Signature:........................................................ Arne Kristiansen Development Engineer Jakob Hatteland Technology A/S Date: 22 January 2007 Return Of Goods Information Return of goods: (Applies not to warrenty/normal service/repair of products) Before returning goods, please contact your system supplier before sending anything directly to JHD. When you return products after loan, test, evaulation or products subject for credit, you must ensure that all accessories received from our warehouse is returned to JHD. This applies to cables, powermodules and additional equipment except screws or similar, user manual, datasheets or other written paper documents. Furthermore, the product must not have any minor / medium or severe scratches, chemical spills or similar on the backcover, front frame or glass. This is needed to credit the invoice 100%. Missing parts will not be subject for credit, and you will not get total credit for returned product. You will either be charged separately or the amount is withdrawn from the credit. If you decide to ship the missing items on the after hand, you will get 100% credit for that particular invoice or items received at JHD incoming goods control. Please contact our service/sales department if additional questions. Current prices apply as per May 2004: Signal Cable DSUB 15P Male or Female - Approx 1,8meters Price: 170,- NOK each Signal Cable BNC 5P - Approx 1,8meters Price: 350,- NOK each RS-232 serial cable DSUB 9P - Approx 1,8meters Price: 80,- NOK each Powercable 110 / 220 VAC (European or US standard) - Approx 1,8meters Price: 50,- NOK each Minor / Medium or severe scratches / chemical spill on backcover Price: 1300,- NOK Any scratch, chemical spill or similar on front frame (including glass) (Prices are approx, and any deviation are evaulated during incoming goods control) Price: 2000,- NOK Approved packaging methods/materials: (Applies to all shipments to JHD) When returning goods, please make sure you surround the product with the following material, whenever possible: Original packaging from JHD, firm foam material, bubble wrap or lots of PadPack paper or Foam chips/polyester wrapped in sealed plastic bags. In any case, always use a solid cardboard box to surround everything. Not approved packaging methods/materials are: Foam chips, expanded polyester, clothes, nothing, or too little, or anything that will crumble and get into the ventilation holes of products and cardboard boxes that are not suitable to secure the product during shipment. Appendix IND100077-14 47 INB100014-1 (Rev 19) Terms The Hatteland Group - Terms Of Sale And Delivery: 1) APPLICATION The terms of sale and delivery include the following companies: Autostore AS, Jakob Hatteland Assembly AS, Jakob Hatteland Computer AS, Jakob Hatteland Display AS, Jakob Hatteland Logistics, Jakob Hatteland Supply AS and Jakob Hatteland Technology AS. 2) PRICE a) The price is per each, if nothing else has been stated, VAT not included. Price is based on the prices from our suppliers, current custom rates, taxes, rate of exchange and international raw material prices. We reserve ourselves the rights to adjustments in case of alternation on the above mentioned. b) Included in the price is the supplier’s standard packing. In case of re-packing/smaller quantities we reserve ourselves the right to add an additional sum for warrantable packing according to CECC 0015 (Basic inspection for protection of electrostatic sensitive devices) 3) VALIDITY If nothing else has been stated in our quotation, the offer is valid for 30 days from the date of quotation. 4) PACKAGE QUOTATION A package quotation means that all the components offered, must be ordered by us. If one component or more are removed from the quotation, the prices given in the package quotation are not valid. 5) TERMS OF PAYMENT Cash on delivery or payment in advance. Net granted for companies, schools and institutions only, according to agreement. In case of too late payment 1.5% interest/month will be charged. Seller has mortage rights in the goods delivered until the purchase price, additional interests and charges have been paid in full. Accepted bill is not considered as payment until it has been honoured in full. 6) TIME OF DELIVERY The quoted time of delivery is based on information from our suppliers. We disclaim any responsibility for the consequences of any delay or cancellation from our suppliers. Belated delivery gives not solely the right for cancellation. 7) DELIVERY POINT OF TIME Goods are considered delivered to customer when handed over to charterer. 8) FREIGHT / PACKING / FORWARDING FEE Jakob Hatteland Display AS charge NOK 50,- in forwarding fee for orders below NOK 1000,-. For orders below NOK 1000,- Jakob Hatteland Supply AS charge freight according to expenses, and NOK 25,- for packing. For handling requested beyond ordinary hours NOK 250,- is charged. Express service is charged with NOK 100,- + freight charges. All the companies charge freight according to expenses for orders above NOK 1000,-. VAT not included. 9) COMPLAINT By receipt customer must check goods for obvious defects which have to be claimed within 8 days from receipt. Otherwise acceptance of complaint can not be counted on. 10) GUARANTEE / SERVICES Time of guarantee is calculated from our date of shipment, and applies to the extent that we are covered by our supplier’s guarantee regulations. The guarantee does no longer apply if: I) there has been encroached upon the goods without seller’s consent II) terms of payment is not fulfilled III) the goods have been damaged due to unskilled treatment IV) components which are sensitive for static electricity have not been unpacked and treated in a secure way. Minimum requirements: CECC 00015’s standards for handling of such components. The guarantee does not include fair wear and tear. Appendix IND100077-7 48 INB100014-1 (Rev 19) Terms 11) RESPONSIBLITY Seller undertake to deliver faultless and functional capable goods according to existing technical specifications. Seller disclaim responsibility for any damage or loss which directly or indirectly may be caused due to failure or defect with the delivered goods, if carelessness from the seller can be limited up to the cost of the goods. The supplier’s responsibility for defects with the supplied goods do not include secondary damage or loss. 12) CANCELLATION / RETURN Binding sales contract is concluded when we have confirmed customer’s purchase order. Any disagreements in our order confirmation must be reported to seller within 6 days. The agreement can not be altered without our permission, after acceptance from our supplier. If goods are wanted to be returned, a Return No must be assigned from seller. Returned goods without a Return No will not be accepted. By return of stock listed goods, 20% return fee is charged. Returned goods are shipped on customer’s account and risk. 13) LOAN, RENT and DEMO When borrowing of goods for demo/test, the date of return must be added to the document. If no date has been stated, date of return is two weeks from the date of the document. Before return, seller must be contacted for a Return No (RTK). Goods which have been sold with an agreed right of return within stated terms, shall also have a Return No. The Return No must be obtained before the stated date of return. Returned goods without a Return No, or which have not been packed in original packing, will not be accepted. 14) LIMITATIONS If any of our suppliers claim limited delivery terms towards us, our terms of delivery will be restricted according to those. 15) SOFTWARE Sold or borrowed software is not allowed to be copied or spread in other ways, without a written permission. 16) RE-EXPORT Goods delivered from seller may be subject to special rules of exportation in their supplier’s native country. Buyer is responsible to obtain necessary permissions for further export/re-sale. 17) QUESTION IN DISPUTE To settle any dispute the Karmsund Herredsrett is approved the legal venue. Appendix IND100077-7 49 INB100014-1 (Rev 19) Terms INSTRUCTIONS FOR THE CONSIGNEE 1) CONTROL Control the goods immediately by receipt. Examine the quantity towards the invoice/packinglist/shipping documents. Look for outward defects on the packing which may indicate damage on or loss of contents. Control the container and the seals for any defects. 2) SECURING EVIDENCE When defects on the goods have been found, evidence must be secured, and seller must be informed. Call the transporter and point out the defects. Add a description of the defects on the goods receipt, the forwarder’s copy of the way-bill or on the driving slip. 3) RESCUE Bound the damage. Try to restrict the damage and the loss. Seller will compensate expences incurred due to reasonable security efforts in addition to damage and loss. 4) COMPLAINT Write immediately a complaint to the transporter or his agent. Forward immediately the complaint to the transporter or his agent, and hold the transporter responsible for the defects. The complaint must be sent at the latest: - for carriage by sea: within 3 days - for overland / air transportation within 7 days 5) DOCUMENTATION For any claims the following documentation is required, and must be forwared to the company or their agent: invoice, way-bill and/or bill of landing, and/or statement of arrival, inspection document, besides a copy of the letter of complaint to the transporter. Appendix IND100077-7 50 INB100014-1 (Rev 19) Notes General Notes: (For all products) - The unit is type approved according to EN60945 4th, 4.4, equipment category b) protected from the weather. - Other type approvals applies for the different products. Please see Testing & Approvals Overview section in this manual for more information. - Use of brightness and push buttons may inhibit visibility of information at night. Note for ECDIS Systems For ECDIS systems the brightness knob indication mark should be aligned directly with the indication mark located on the label. (See Physical Overview or Operation section in this manual) Note for Documentation CD-ROM The separate and full documentation for third party components (including options that are factory installed) are available on attached CD. The printed physical manual only covers specific information for Hatteland products, and not generally includes third party components. Appendix IND100077-20 51 INB100014-1 (Rev 19) Notes Important BIOS Reset / No picture information Please note that when performing a “Load Optimized Defaults” or “Load Fail-Safe Defaults” command in the BIOS menu, or if the internal ETX processor module was replaced, the picture on the TFT display will be black and the sync will be lost upon restart. No picture will be present on the MMC unit! However, by using the standard RGB OUT DSUB connector connected to an external TFT Display or CRT Monitor, you will get a cloned picture from the MMC unit. Now you can correctly setup the display properties in the BIOS, which will re-enable the picture to display correctly on the MMC unit again. Please follow the procedure below for your MMC unit. If you have no external display or monitor available, you can use the “blind man” routine: 1: Power on the MMC unit, while pressingon the keyboard to enter BIOS setup. 2: Press thekey 2 times, then press 3: Press the key 17 times, then press 4: Press the key 5 times (15 inch), 3 times (19/20 inch) or 6 times (23 inch) followed by pressing 5: Press on the keyboard, and press . The BIOS settings will be saved, and the unit will reset and boot up correctly with picture on the MMC Unit again. BIOS Setup Menu Reference: All versions of 15 Inch - JH 15T05MMC-xx (Pentium M) - Choose “Advanced Chipset Features” - Choose “Panel Number” - Choose “1024x768 24bit SC” All versions of 19 Inch - JH 19T02MMC-xx (Pentium M) - Choose “Advanced Chipset Features” - Choose “Panel Number” - Choose “1280x1024 24bit SC” All versions of 20 Inch - JH 20T05MMC-xx (Pentium M) - Choose “Advanced Chipset Features” - Choose “Panel Number” - Choose “1280x1024 24bit SC” All versions of 23 Inch - JH 23T02MMC-xx (Pentium M) - Choose “Advanced Chipset Features” - Choose “Panel Number” - Choose “1600x1200 24bit SC” When done, please refer to the BIOS manual if you need to change other options (available on separate/attached CD for your specific product). Appendix IND100077-31 52 INB100014-1 (Rev 19) Revision History Rev. 1 2 3 4 By SE SE SE SE 5 6 7 8 9 10 SE SE SE SE SE SE SE SE 11/12 13 16 SE SE SE 17 SE 18 SE SE 14 15 19 Date 02 Sep 04 26 Oct 04 08 Nov 04 04 Mar 05 Notes First release internet version. Products covered, JH 15T05 and JH 19T02 Added pin assignments for RS422 and RS485 Updated important security information regarding the Compact Flash Slot. Updated 19 Inch specification and Testing & Type Approval section. Added JH 23T02 MMC. Added Bracket Mounting Precautions and drawings. 17 Mar 05 Updated Testing and Type Approval Section. 21 Jun 05 Updated specifications. 17 Aug 05 Updated Physical Connections Section. 24 Aug 05 Added technical drawings for JH 19T02 MMC with bracket. 7 Sep 05 Updated specifications. 18 Nov 05 Updated specifications. 22 May 06 Updated frontpage/design, updated Testing and Type Approvals section. 22 Aug 06 Type approval page removed, and information merged with the respective product specification pages. 15 Sep 06 Updated specifications. Changed 5400 rpm to 4200 rpm 02 Oct 06 Added JH 10T08 MMC 02 Jan 07 Updated testing and type approvals for various products. Updated specifications for all MMC products. Available processor range now up to 2.0 GHZ. 22 Jan 07 Updated information regarding the HDD LED in user controls & specifications. Applicable for 10” and 23” models. 01 Feb 07 Updated testing and type approvals. 09 Mar 07 Updated specifications regarding resolutions. Appendix IND100077-25 53 INB100014-1 (Rev 19) Contact Information Head office, Vats / Norway: Jakob Hatteland Display AS Åmsosen N-5578 Nedre Vats, Norway Tel: +47 5276 3700 Fax: +47 5276 5444 Sales office, Oslo / Norway: Jakob Hatteland Display AS Gjerdrums vei 12 N-0484 Oslo, Norway Tel: +47 5276 3700 Fax: +47 2258 6790 Sales office, Tønsberg / Norway: Jakob Hatteland Display AS Narverødveien 40 N-3313 Tønsberg, Norway Tel: +47 5276 3700 Fax: +47 3335 7049 Sales office, Frankfurt / Germany: Jakob Hatteland Display GmbH Werner Heisenberg Strasse 12, D-63263 Neu-Isenburg, Germany Tel: +49 6102 370 954 Fax: +49 6102 370 968 Sales office, Aix-en-Provence / France: Jakob Hatteland Display SAS Espace Cézanne - 14 Parc du Golf 350, Avenue JRGG de la Lauzière - CS 90519 13593 Aix-en-Provence Cedex 3, France Tel: +33 (0)4 42 16 35 15 Fax: +33 (0)4 42 16 35 09 Sales office, Orlando / USA: Jakob Hatteland Display Inc. 801 International Parkway, 5th Floor Lake Mary, FL 32746, USA Tel: +1 407 562 1677 Fax: +1 407 562 1777 jhd-no@hatteland.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : 3.1-702 Instance ID : uuid:8e4cefcd-e7a3-4db5-b68b-3f56bdf0b3cb Document ID : adobe:docid:indd:24a60179-e95f-11da-bc19-f366b62223ca Rendition Class : proof:pdf Derived From Instance ID : 36a2dcab-e707-11da-96fa-cad54115409d Derived From Document ID : adobe:docid:indd:36a2dcaa-e707-11da-96fa-cad54115409d Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 600.00, 600.00, 600.00, 300.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 600.00, 600.00, 600.00, 300.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 600.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:499E029FA97BDB11936DA1093F41360A, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:D4EB5C2D0E34DB119EA398EB2CE17425, uuid:1443EFAC9548DB11985295717EA2439B, uuid:9A4908124B54DB11876F806D37E689B3, uuid:58EBFF389348DB11985295717EA2439B Manifest Reference Document ID : adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, uuid:66E1A583A97BDB11936DA1093F41360A, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, adobe:docid:photoshop:756215bb-9e28-11da-a1fc-a3a83a2bf073, uuid:1343EFAC9548DB11985295717EA2439B, uuid:FA42C1A89648DB11985295717EA2439B, uuid:57EBFF389348DB11985295717EA2439B Create Date : 2007:03:09 16:10:04+01:00 Modify Date : 2007:03:09 16:11:25+01:00 Metadata Date : 2007:03:09 16:11:25+01:00 Creator Tool : Adobe InDesign CS2 (4.0.4) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 7541 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False Page Count : 54 Creator : Adobe InDesign CS2 (4.0.4)EXIF Metadata provided by EXIF.tools