Exalt Wireless 104P90M 4.9GHz Point to Point Fixed Link Radio User Manual manual LMA2

Exalt Communications Inc. 4.9GHz Point to Point Fixed Link Radio manual LMA2

Contents

Manual

EX-4.9 Series Digital Microwave Radio Module Part Number: 5xxxxxxx Date: 2007-07-16
Exalt Communications, Inc. Exalt EX-4.9Series Module Guide 5xxxxxxx 1 2007-07-16 Legal Notice The information contained herein is the property of Exalt Communications, Inc. (“Exalt”) and is supplied without liability for errors or omissions. No part of this document may be reproduced, in any form, except as authorized by contract or other written permission from the owner. Any brand names and product names included in this manual are trademarks, registered trademarks, or trade names of their respective holders. The contents of this document are current as of the date of publication. Exalt reserves the right to change the contents without prior notice. The publication of information in this document does not imply freedom from patent or other rights of Exalt or others. © 2007 Exalt Communications Inc. All rights reserved. The Exalt logo is a trademark of Exalt Communications, Inc. Open-Source License Information In addition to proprietary software/firmware, which is the sole intellectual property of Exalt, the Exalt EX-4.9 Series of Digital Microwave Radios make use of public (open-source) software/firmware within the terms of use of their respective shared license agreements. Exalt will supply copies of any of this code, within the terms of their individual licensing agreements, upon request. Open-Source Code License Agreement Website Linux Operating System GNU GPL Version 2 www.gnu.org BusyBox CLI GNU GPL Version 2 www.gnu.org; www.busybox.net GoAhead Web Server Copyright (c) 2003 GoAhead Software, Inc. All Rights Reserved. www.goahead.com U-boot Boot Code GNU GPL Version 2 www.gnu.org www.sourceforge.net Net-SNMP (see Copyright Notices on page 10) www.sourceforge.net
Exalt Communications, Inc. Exalt EX-4.9 Series Guide 5xxxxxxx 2 2007-07-16 About this Document This manual provides a description of the Exalt EX-4.9 Series Digital Microwave Radio Module. Revision History Date Products and Release code 2007-07-16 EX-4.9 Series Radio Module Guide
Exalt Communications, Inc. Exalt EX-4.9Series Module Guide 5xxxxxxx 3 2007-07-16 General Compliance and Safety The usage of radio transmission devices is subject to specific regulatory requirements governed by regional legislation. In most cases, the specific device must be authorized for use in a given country and must be installed and adjusted in accordance with specific radio-frequency settings and in a manner that has been authorized specific to the device itself in accordance with the specific location of the device. Some users may be completely or partially restricted from use of the device. Please consult local governmental agency/agencies for regulatory requirements before use, or contact Exalt or your Exalt authorized dealer for assistance. Do not modify this device in any way without the express written consent of Exalt. Modification voids the manufacturer warranty, and may also be illegal in accordance to government regulations. In addition, there are no user-serviceable parts or assemblies inside the product housing. There may also be voltages, signals, and mechanisms within the device that could be harmful to human safety. The mounting of the system and associated peripherals and connections (inclusive of antenna mast, antenna, cabling, egress, lightning protection devices, grounding, power, and so on) may be subject to regional requirements for health and human safety. A qualified professional installer and an electrician may be required by law. Exalt cannot warranty the device or be found liable for any unauthorized use or installation of the device. Safety Icons The following icons denote specific types of information. Note This symbol means take note. Notes contain helpful suggestions or references to materials not contained in the manual. Caution This symbol means be careful. There is a risk of equipment damage, loss of data, or injury to persons. To reduce the risk, follow the instructions. This is a general warning, caution, or risk of danger. Warning This warning symbol means there is a risk of electric shock. This situation could cause bodily injury. To reduce the risk, before working on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents.
Exalt Communications, Inc. Exalt EX-4.9 Series Guide 5xxxxxxx 4 2007-07-16 Safety Notices 1. Review this entire guide for important installation instructions BEFORE attempting to install this product. 2. The end-product is intended to be installed, used, and maintained by experienced telecommunications personnel only. 3. Do not move or alter the marking labels.
Exalt Communications, Inc. Exalt EX-4.9Series Module Guide 5xxxxxxx 5 2007-07-16 Table of Contents Legal Notice........................................................................................................................ 1 Open-Source License Information...................................................................................... 1 About this Document.......................................................................................................... 2 Revision History ............................................................................................................. 2 General Compliance and Safety.......................................................................................... 3 Safety Icons..................................................................................................................... 3 Safety Notices..................................................................................................................... 4 Introduction......................................................................................................................... 6 Related Documentation and Software ............................................................................ 6 The Exalt EX-4.9 Series of Digital Microwave Radio Module...................................... 6 Radio A/B Configuration............................................................................................ 7 Installation........................................................................................................................... 8 EX- 4.9 System Specifications ........................................................................................... 9 Copyright Notices............................................................................................................. 10 Net-SNMP..................................................................................................................... 10 General Regulatory Notices.............................................................................................. 15 Antennas ....................................................................................................................... 15 Region 1 Specifics ............................................................................................................ 18 Federal Communications Commission (FCC), United States ...................................... 18 United States Compliance................................................................................................. 18 Industry Canada (IC), Canada....................................................................................... 19 Antennas Supported in Canada................................................................................. 19 Canada Compliance .......................................................................................................... 19 EX-4.9 EIRP for the US and Canada................................................................................ 20 4940-4990 MHz Band................................................................................................... 20 Index ................................................................................................................................. 21 List of Tables Table 1 Factory Default Settings ................................................................................. 7 Table 2 EX-4.9 supported antennas........................................................................... 16
Exalt Communications, Inc. Exalt EX-4.9 Series Guide 5xxxxxxx 6 2007-07-16 Introduction Exalt Communications, Inc. thanks you for your purchase. Our goal is to build the highest quality, highest reliability digital microwave radio products. This commitment to quality and reliability extends to our employees and partners alike. We appreciate any comments on how we can improve our products, as well as your sales and Customer Care experience. Customer Care Hotline (USA): (408) 871-9890 Toll-Free Customer Care Hotline (USA): (877) EXALT-01 (392-5801) Direct-Dial Telephone (USA): (408) 871-1804 Website: www.exaltcom.com Sales e-mail: sales@exaltcom.com Customer Care e-mail: support@exaltcom.com Mailing Address: Exalt Communications, Inc. 580 Division St. Campbell, CA 95008 USA Related Documentation and Software This manual makes reference to other documentation and software files that may be necessary. Any document or software mentioned in this manual can be found at: http://www.exaltcom.com/support/downloads.htm The Quick Start Guide provides any necessary username and password information to gain access to these documents. The Exalt EX-4.9 Series of Digital Microwave Radio Module The Exalt EX-4.9 Series of Digital Microwave Radios are the most advanced carrier-class point-to-point terrestrial radio communications devices operating in the 4940 to 4990 MHz frequency bands, respectively. The EX-4.9 Series radios connect voice and/or digital data from one location to another, obviating the need for copper or fiber connectivity, or enhancing existing connectivity by providing a redundancy solution, a primary solution, and/or additional capacity. The EX-4.9 Series Digital Microwave Radio Module is installed in Exalt’s EX-4.9 Series products. Please refer to the Installation and Management Guide for your end-product for detailed information on installation, set-up, troubleshooting, and maintenance. There are no user serviceable parts inside the end-product including the EX-4.9 Series Module, opening the end-product voids all warranties.
Exalt Communications, Inc. Exalt EX-4.9Series Module Guide 5xxxxxxx 7 2007-07-16 Generally, the EX-4.9 Series products require a clear line-of-sight and proper path clearance to achieve a high-performance, reliable connection. Perform professional path engineering and site planning BEFORE installing this equipment. Note: It is the professional installer’s responsibility to ensure that the radio system is implemented in a legal fashion. Exalt is not liable for any unsafe or illegal installations. Radio A/B Configuration Use the Exalt GUI to configure the radio terminals for Radio A and Radio B orientation. Since many other parameters also need to be set, and the Exalt GUI is needed for these configurations, this is the best way to completely configure the radio terminals. Radios arrive from manufacture in default configuration, orientated as Radio B and configured as shown in Table 1. Table 1 Factory Default Settings Parameter EX-4.9 Frequency 4965 MHz Transmit Power +4 dBm Bandwidth 10 MHz Mode Mode 1 Link Distance <10 miles TDD Frame Size 2ms Link Security Key 000000000000 Administration Password password User Password password IP Address 10.0.0.1 IP Mask 255.0.0.0 IP Gateway 0.0.0.0 Ethernet Interfaces Enabled, 100/Full AUX port NMS Access In-Band T1/E1 Settings (-16 models) All Enabled, T1, B8ZS, AIS T1/E1 Settings (std. models) Disabled
Exalt Communications, Inc. Exalt EX-4.9 Series Guide 5xxxxxxx 8 2007-07-16 Installation Each Exalt Digital Microwave Radio Module is installed in an EX-4.9 Series product. There are no user-serviceable parts, Installation and Management need to be as described in the Installation and Management Guide applicable to the end-product.
Exalt Communications, Inc. Exalt EX-4.9Series Module Guide 5xxxxxxx 9 2007-07-16 EX- 4.9 System Specifications Frequency Band 4940 to 4990 MHz Tunable Range 4945 to 4985 MHz Output Power (at full power, Mode 1) +24 dBm (20 MHz BW) +22 dBm (10 MHz BW) Output Power (at minimum power) +4 dBm Selectable Channel Bandwidths 10 MHz, 20 MHz* Receiver Threshold (BER=10-6) Maximum RSL Mode 1: -25dBm error-free; 0dBm no damage Non-overlapping channels 10 MHz: 5; 20 MHz, 2 Regulatory Compliance FCC Part 90; IC RSS-111 Contains FCC ID TTM-104P90M IC ID 6254A-104P90I/R Emission Designator(s) * Mode 2 for 20 MHz BW is enabled through firmware options. dBm Mode 1 Mode 2 10 MHz -86 -78 20 MHz -83 -75 10 MHz 8M72D7D 20 MHz 19M0W7D
Exalt Communications, Inc. Exalt EX-4.9 Series Guide 5xxxxxxx 10 2007-07-16 Copyright Notices This section present copyright notices for third-party software licensed to Exalt Communications, Inc. Net-SNMP The following copyright notice applies to the open-source licensing agreement for Net-SNMP. Copyright 1989, 1991, 1992 by Carnegie Mellon University Derivative Work - 1996, 1998-2000 Copyright 1996, 1998-2000 The Regents of the University of California All Rights Reserved Permission to use, copy, modify and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appears in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of CMU and The Regents of the University of California not be used in advertising or publicity pertaining to distribution of the software without specific written permission. CMU AND THE REGENTS OF THE UNIVERSITY OF CALIFORNIA DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL CMU OR THE REGENTS OF THE UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM THE LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
Exalt Communications, Inc. Exalt EX-4.9Series Module Guide 5xxxxxxx 11 2007-07-16 Network Associates Technology, Inc. Copyright (c) 2001-2003, Networks Associates Technology, Inc All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the Networks Associates Technology, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Cambridge Broadband, Ltd. Portions of this code are copyright (c) 2001-2003, Cambridge Broadband Ltd. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
Exalt Communications, Inc. Exalt EX-4.9 Series Guide 5xxxxxxx 12 2007-07-16 TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Sun Microsystems, Inc. Copyright © 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved. Use is subject to license terms below. This distribution may include materials developed by third parties. Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Exalt Communications, Inc. Exalt EX-4.9Series Module Guide 5xxxxxxx 13 2007-07-16 Sparta, Inc. Copyright (c) 2003-2005, Sparta, Inc All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Sparta, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Cisco, Inc. Copyright (c) 2004, Cisco, Inc and Information Network Center of Beijing University of Posts and Telecommunications. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Cisco, Inc, Beijing University of Posts and Telecommunications, nor the names of their contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Exalt Communications, Inc. Exalt EX-4.9 Series Guide 5xxxxxxx 14 2007-07-16 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Fabasoft R&D Software GmbH & Co. Copyright (c) Fabasoft R&D Software GmbH & Co KG, 2003 oss@fabasoft.com Author: Bernhard Penz Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * The name of Fabasoft R&D Software GmbH & Co KG or any of its subsidiaries, brand or product names may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Exalt Communications, Inc. Exalt EX-4.9Series Module Guide 5xxxxxxx 15 2007-07-16 Appendix A - Regulatory Compliance General Regulatory Notices Antennas Table 2 lists antennas recommended for use with the EX-4.9 Series radios. In some countries, antennas exceeding a certain level of gain may be unlawful.
Exalt Communications, Inc. Exalt EX-4.9 Series Guide 5xxxxxxx 16 2007-07-16 Table 2 lists antennas supported by the EX-4.9 family of Digital Microwave Radios. Table 2 EX-4.9 supported antennas Manufacturer Model # Description Mid-band Gain dBi(mid-band) Andrew PL4-44 4' dish 33 Andrew PL6-44 6' dish 36.6 Andrew PL8-44 8' dish 39.3 Andrew PL10-44 10' dish 41 Andrew PL12-44 12' dish 42.6 Andrew PL15-44 15' dish 44.5 Gabriel EPD1-49 1' panel 21.9 Gabriel EPD249N 2' panel 23 Gabriel QFD2-49-N 2' dish 27.7 Gabriel QFD2.5-49-N 2.5' dish 29.7 Gabriel QFD6-49-N 6' dish 33.7 Gabriel QFD4-49-N 4' dish 33.7 Gabriel RFB15-44 15' dish 44.5 Mars MA-WA49-1X 1' panel 21 MaxRad MPRW49027 2' dish 28 MaxRad MPRW49029 2.5' dish 30 MaxRad MPRW49031 3' dish 32 MTI MT-465005 1' panel 21 MTI MT-466004 1.5' panel 25 MTI MT-466003 2' panel 27 Mwave GS2-54-N 2' grid dish 25
Exalt Communications, Inc. Exalt EX-4.9Series Module Guide 5xxxxxxx 17 2007-07-16 Mwave RP2-54-N 2' dish 26.7 Radiall/Larsen R380.500.222 1' panel 18.8 RadioWaves SP1-4.7NS 1' dish 24.6 RadioWaves SP2-4.7 2' dish 26.6 RadioWaves SP3-4.7NS 3' dish 30 RadioWaves SP4-4.7NS 4' dish 32.6 RadioWaves SP6-4.7NS 6' dish 35.6 RadioWaves SP8-4.7NS 8' dish 39
Exalt Communications, Inc. Exalt EX-4.9 Series Guide 5xxxxxxx 18 2007-07-16 Region 1 Specifics Region 1 is designated for USA and Canada installations. Note: The professional installer is responsible to ensure that RF output power is properly adjusted to not exceed the regulatory limit. Federal Communications Commission (FCC), United States The device is allowed to be used provided it does not cause interference to other devices. It is not guaranteed to provide protection against interference from other electronic and radio devices. The system has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC regulations. Changes or modifications not expressly approved in writing by Exalt may void the user’s authority to operate this equipment. This device must be professionally installed. To comply with regulations, the output power of this device may need to be adjusted in accordance to the associated transmission system. The antenna associated with the EX-4.9 family shall be mounted in a location that is at least 10’/3m away from humans that may be subject to long-term or continuous exposure. United States Compliance The EX-4.9 product families operate under FCC Rule Parts 90 as a licensed device. They may only be used as a point-to-point transmission device for fixed or temporary-fixed (non-mobile) installations. The devices are subject to the following restrictions:
Exalt Communications, Inc. Exalt EX-4.9Series Module Guide 5xxxxxxx 19 2007-07-16 • Do not use external amplifiers to boost the power or overcome transmission system losses, unless the specific amplifier/cable/antenna combination has expressly been authorized by the FCC. The output power must never exceed +50 dBm. • Cross-border transmissions are expressly prohibited, except with written permission from both the FCC and the governing body of the neighboring country (Cofetel for Mexico; Industry Canada for Canada). – Use only parabolic dish antennas or directional flat-panel antennas. No other types of antennas (omni-directional, yagi, and so on) are authorized. Parabolic dishes of either grid or solid type are allowed. Maximum mid-band gain of each type of antenna certified are: ¶ EX-4.9 models: – Parabolic dish: 26dBi (larger gains are allowed, with Tx power reduction) – Directional flat panel: 26 dBi (larger gains are allowed, with Tx power reduction) – Industry Canada (IC), Canada This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 4. this device may not cause interference, and 5. this device must accept any interference, including interference that may cause undesired operation of the device. Antennas Supported in Canada The EX-4.9 family has been designed to operate with the antennas listed in Table 2 which have a maximum gain of 37.9 dBi. Antennas not included in the list or having a gain greater than 37.9 dBi are prohibited for use with this device. The required antenna impedance is 50 Ohms. The antenna associated with the EX-4.9 family shall be mounted in a location that is at least 10’/3m away from humans that may be subject to long-term or continuous exposure. Canada Compliance EX-4.9 models operate under RSS-210 of Industry Canada regulations. Operation is subject to the following conditions, unless express permission is granted by Industry Canada to operate in a different manner: • External amplifiers cannot be used to boost the power or to overcome transmission system losses, unless the specific amplifier/cable/antenna combination is expressly authorized by Industry Canada.
Exalt Communications, Inc. Exalt EX-4.9 Series Guide 5xxxxxxx 20 2007-07-16 • Cross-border transmissions are expressly prohibited, except with written permission from both Industry Canada and the governing body of the neighboring country (FCC for USA) • Only parabolic dish antennas or directional flat-panel antennas may be used. No other types of antennas (omni-directional, yagi, and so on) are authorized. Parabolic dishes of either grid or solid type are allowed. Maximum gain of each type of antenna allowed is: ¶ EX-4.9 models: – Parabolic dish: 37.9 dBi (6'/1.8m diameter) – Directional flat panel: 28 dBi (~2'/61cm square) EX-4.9 EIRP for the US and Canada 4940-4990 MHz Band For the EX-4.9r model, within the 4940–4990 MHz band, the maximum EIRP allowed is +50dBm. The maximum output power of the radio shall never exceed +24dBm. For the EX-4.9r models, the transmit power must be reduced from maximum (+20dBm for 40 MHz BW, +24dBm for 20MHz BW, +22dBm for 10MHz) by 1 dB for every 1dB that the antenna gain exceeds 26dBi (including transmission system losses). – The professional installer is responsible to ensure that RF output power is properly adjusted so that it does not exceed the regulatory limit of these conditions.
Exalt Communications, Inc. Exalt EX-4.9Series Module Guide 5xxxxxxx 21 2007-07-16 Index A antennas EX-4.9 Canada, 19 US, 16 C contact information, 6 D documentation, related, 6 R radio default settings, 7 Radio A, 7 regulatory requirements EX-4.9i FCC EIRP, 20 USA, 18 regulatory rquirements Canada, 19
Exalt Communications, Inc. Exalt EX-4.9 Series Guide 5xxxxxxx 2007-06-29 © 2007 Exalt Communications Inc. 580 Division St. Campbell, CA 95008 USA)

Navigation menu