Exalt Wireless 105P25M 5 GHz Point to Point Fixed Link Radio Module User Manual manual LMA
Exalt Communications Inc. 5 GHz Point to Point Fixed Link Radio Module manual LMA
Contents
Module Manual
EX-5 Series Digital Microwave Radio Module Part Number: 5xxxxxxx Date: 2007-06-29 Exalt Communications, Inc. Exalt EX-5 Series Module Guide Legal Notice The information contained herein is the property of Exalt Communications, Inc. (“Exalt”) and is supplied without liability for errors or omissions. No part of this document may be reproduced, in any form, except as authorized by contract or other written permission from the owner. Any brand names and product names included in this manual are trademarks, registered trademarks, or trade names of their respective holders. The contents of this document are current as of the date of publication. Exalt reserves the right to change the contents without prior notice. The publication of information in this document does not imply freedom from patent or other rights of Exalt or others. © 2007 Exalt Communications Inc. All rights reserved. The Exalt logo is a trademark of Exalt Communications, Inc. Open-Source License Information In addition to proprietary software/firmware, which is the sole intellectual property of Exalt, the Exalt EX-5 Series of Digital Microwave Radios make use of public (opensource) software/firmware within the terms of use of their respective shared license agreements. Exalt will supply copies of any of this code, within the terms of their individual licensing agreements, upon request. Open-Source Code License Agreement Website Linux Operating System GNU GPL Version 2 www.gnu.org BusyBox CLI GNU GPL Version 2 www.gnu.org; www.busybox.net GoAhead Web Server Copyright (c) 2003 GoAhead Software, Inc. All Rights Reserved. www.goahead.com U-boot Boot Code GNU GPL Version 2 www.gnu.org www.sourceforge.net Net-SNMP 5xxxxxxx 2007-06-29 (see Copyright Notices on page 14) www.sourceforge.net Exalt Communications, Inc. Exalt EX-5 Series Guide About this Document This manual provides a description of the Exalt EX-5 Series Digital Microwave Radio Module. Revision History Date Products and Release code 2007-06-29 EX-5 Series Radio Module Guide 5xxxxxxx 2007-06-29 Exalt Communications, Inc. Exalt EX-5 Series Module Guide General Compliance and Safety The usage of radio transmission devices is subject to specific regulatory requirements governed by regional legislation. In most cases, the specific device must be authorized for use in a given country and must be installed and adjusted in accordance with specific radio-frequency settings and in a manner that has been authorized specific to the device itself in accordance with the specific location of the device. Some users may be completely or partially restricted from use of the device. Please consult local governmental agency/agencies for regulatory requirements before use, or contact Exalt or your Exalt authorized dealer for assistance. Do not modify this device in any way without the express written consent of Exalt. Modification voids the manufacturer warranty, and may also be illegal in accordance to government regulations. In addition, there are no user-serviceable parts or assemblies inside the product housing. There may also be voltages, signals, and mechanisms within the device that could be harmful to human safety. The mounting of the system and associated peripherals and connections (inclusive of antenna mast, antenna, cabling, egress, lightning protection devices, grounding, power, and so on) may be subject to regional requirements for health and human safety. A qualified professional installer and an electrician may be required by law. Exalt cannot warranty the device or be found liable for any unauthorized use or installation of the device. Safety Icons The following icons denote specific types of information. Note This symbol means take note. Notes contain helpful suggestions or references to materials not contained in the manual. Caution This symbol means be careful. There is a risk of equipment damage, loss of data, or injury to persons. To reduce the risk, follow the instructions. This is a general warning, caution, or risk of danger. Warning This warning symbol means there is a risk of electric shock. This situation could cause bodily injury. To reduce the risk, before working on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. 5xxxxxxx 2007-06-29 Exalt Communications, Inc. Exalt EX-5 Series Guide Safety Notices 1. Review this entire guide for important installation instructions BEFORE attempting to install this product. 2. The end-product is intended to be installed, used, and maintained by experienced telecommunications personnel only. 3. Do not move or alter the marking labels. 5xxxxxxx 2007-06-29 Exalt Communications, Inc. Exalt EX-5 Series Module Guide Table of Contents Legal Notice........................................................................................................................ 1 Open-Source License Information...................................................................................... 1 About this Document .......................................................................................................... 2 Revision History ............................................................................................................. 2 General Compliance and Safety.......................................................................................... 3 Safety Icons..................................................................................................................... 3 Safety Notices ..................................................................................................................... 4 Introduction......................................................................................................................... 7 Related Documentation and Software ............................................................................ 7 The Exalt EX-5 Series of Digital Microwave Radio Module......................................... 7 Radio A/B Configuration............................................................................................ 8 Installation........................................................................................................................... 9 Specifications.................................................................................................................... 10 Common System Specifications ................................................................................... 10 EX-5 System Specifications, 5.3 GHz Band ................................................................ 11 EX-5 System Specifications, 5.4 GHz Band ................................................................ 12 EX-5 System Specifications, 5.8 GHz Band ................................................................ 13 Copyright Notices ............................................................................................................. 14 Net-SNMP..................................................................................................................... 14 General Regulatory Notices.............................................................................................. 19 Dynamic Frequency Selection ...................................................................................... 19 Antennas ....................................................................................................................... 19 Region 1 Specifics ............................................................................................................ 22 Federal Communications Commission (FCC), United States ...................................... 22 United States Compliance................................................................................................. 23 Industry Canada (IC), Canada....................................................................................... 23 Antennas Supported in Canada................................................................................. 23 Canada Compliance .......................................................................................................... 24 EX-5 EIRP for the US and Canada................................................................................... 24 5250-5350 MHz Band................................................................................................... 24 5xxxxxxx 2007-06-29 Exalt Communications, Inc. Exalt EX-5 Series Guide 5470-5725 MHz Band................................................................................................... 25 5725-5850 MHz Band................................................................................................... 25 Region 2 Specifics ............................................................................................................ 26 Europe/ITU (ETSI and CE Mark)................................................................................. 26 Declaration of Conformity to the R&TTE Directive 1999/5/EC.............................. 27 EU WEEE ......................................................................................................................... 27 EU RoHS .......................................................................................................................... 28 Europe Compliance........................................................................................................... 28 EX-5 EIRP by Country ..................................................................................................... 30 5250–5350 MHz band................................................................................................... 30 5470–5725 MHz band................................................................................................... 30 5725-5850 MHz band ................................................................................................... 31 Index ................................................................................................................................. 33 List of Tables Table 1 Factory Default Settings ................................................................................. 8 Table 2 EX-5 supported antennas .............................................................................. 20 Table 3 Region 2 Country Specific Power Levels for EX-5 Series........................... 32 5xxxxxxx 2007-06-29 Exalt Communications, Inc. Exalt EX-5 Series Module Guide Introduction Exalt Communications, Inc. thanks you for your purchase. Our goal is to build the highest quality, highest reliability digital microwave radio products. This commitment to quality and reliability extends to our employees and partners alike. We appreciate any comments on how we can improve our products, as well as your sales and Customer Care experience. Customer Care Hotline (USA): (408) 871-9890 Toll-Free Customer Care Hotline (USA): (877) EXALT-01 (392-5801) Direct-Dial Telephone (USA): (408) 871-1804 Website: Sales e-mail: Customer Care e-mail: www.exaltcom.com sales@exaltcom.com support@exaltcom.com Mailing Address: Exalt Communications, Inc. 580 Division St. Campbell, CA 95008 USA Related Documentation and Software This manual makes reference to other documentation and software files that may be necessary. Any document or software mentioned in this manual can be found at: http://www.exaltcom.com/support/downloads.htm The Quick Start Guide provides any necessary username and password information to gain access to these documents. The Exalt EX-5 Series of Digital Microwave Radio Module The Exalt EX-5 Series of Digital Microwave Radios are the most advanced carrier-class point-to-point terrestrial radio communications devices operating in the 5250 to 5850 MHz frequency bands, respectively. The EX-5 Series radios connect voice and/or digital data from one location to another, obviating the need for copper or fiber connectivity, or enhancing existing connectivity by providing a redundancy solution, a primary solution, and/or additional capacity. The EX-5 Series Digital Microwave Radio Module is installed in Exalt’s EX-5 Series products. Please refer to the Installation and Management Guide for your end-product for detailed information on installation, set-up, troubleshooting, and maintenance. There are no user serviceable parts inside the end-product including the EX-5 Series Module, opening the end-product voids all warranties. 5xxxxxxx 2007-06-29 Exalt Communications, Inc. Exalt EX-5 Series Guide Generally, the EX-5 Series products require a clear line-of-sight and proper path clearance to achieve a high-performance, reliable connection. Perform professional path engineering and site planning BEFORE installing this equipment. Note: It is the professional installer’s responsibility to ensure that the radio system is implemented in a legal fashion. Exalt is not liable for any unsafe or illegal installations. Radio A/B Configuration Use the Exalt GUI to configure the radio terminals for Radio A and Radio B orientation. Since many other parameters also need to be set, and the Exalt GUI is needed for these configurations, this is the best way to completely configure the radio terminals. Radios arrive from manufacture in default configuration, orientated as Radio B and configured as shown in Table 1. Table 1 Factory Default Settings Parameter EX-5 Frequency 5788 MHz Transmit Power +4 dBm Bandwidth 8 MHz Mode Mode 1 Link Distance <10 miles TDD Frame Size 2ms Link Security Key 000000000000 Administration Password password User Password password IP Address 10.0.0.1 IP Mask 255.0.0.0 IP Gateway Ethernet Interfaces AUX port NMS Access 0.0.0.0 Enabled, 100/Full In-Band T1/E1 Settings (-16 models) All Enabled, T1, B8ZS, AIS T1/E1 Settings (std. models) Disabled 5xxxxxxx 2007-06-29 Exalt Communications, Inc. Exalt EX-5 Series Module Guide Installation Each Exalt Digital Microwave Radio Module is installed in an EX-5 Series product. There are no user-serviceable parts, Installation and Management need to be as described in the Installation and Management Guide applicable to the end-product. 5xxxxxxx 2007-06-29 Exalt Communications, Inc. Exalt EX-5 Series Guide Specifications This section presents specifications for the EX-5 Series of Digital Microwave Radios. Common System Specifications Tuning Resolution 1MHz Power Control Resolution 0.5dB Selectable Modulation Modes Mode 1 (QPSK); Mode 2 (16QAM) Selectable Frame Lengths (ms) 0.5, 1, 2, 2.5, 4, 5 Maximum Aggregate User Capacity Mbps Mode 1 Mode 2 8 / 10 MHz 13 27 16 / 20 MHz* 27 54 64MHz* 110 216 Error Floor 10-12 Frequency Stability +7 ppm Link Security 96-bit Security Code *Not all Bandwidth and Mode combinations are available on all radio models, and some may require specific software license keys, which may be purchased from an authorized Exalt representative. 5xxxxxxx 2007-06-29 10 Exalt Communications, Inc. Exalt EX-5 Series Module Guide EX-5 System Specifications, 5.3 GHz Band Frequency Band 5250 to 5350 MHz Tunable Range 5260 to 5332 MHz Output Power (at full power) +13dBm (0.02W) Output Power (at minimum power) -7dBm Selectable Channel Bandwidths 8MHz, 16MHz, 32MHz, 64MHz* Receiver Threshold (BER=10-6) dBm Mode 1 Mode 2 8MHz -86 -78 16MHz -83 -75 32MHz -80 -72 64MHz* -77 -69 Maximum RSL Mode 1: -25dBm error-free; 0dBm no damage Non-overlapping channels 8MHz: 10; 16MHz: 5; 32MHz: 2; 64MHz*: 1 Regulatory Compliance FCC 15.407; IC RSS-210; EN 301 893 Contains FCC ID TTM-105P25M IC ID 6254A-105P25I/R Emission Designator(s) 8MHz 8M7W7D 16MHz 17M2W7D 32MHz 34M5W7D 64MHz* 67M9W7D *For the EX-5 Series, a firmware option may be required to enable 64 MHz BW. 5xxxxxxx 2007-06-29 11 Exalt Communications, Inc. Exalt EX-5 Series Guide EX-5 System Specifications, 5.4 GHz Band Frequency Band 5470 to 5725 MHz Tunable Range 5488 to 5715 MHz Output Power (at full power) +13dBm (0.02W) Output Power (at minimum power) -7dBm Selectable Channel Bandwidths 8MHz, 16MHz, 32MHz*, 64MHz* Receiver Threshold (BER=10-6) dBm Mode 1 Mode 2 8MHz -86 -78 16MHz -83 -75 32MHz -80 -72 64MHz* -77 -69 Maximum RSL Mode 1: -25dBm error-free; 0dBm no damage Non-overlapping channels 8MHz: 29; 16MHz: 14; 32MHz: 7; 64MHz*: 3 Regulatory Compliance FCC 15.407; IC RSS-210; EN 301 893 Contains FCC ID TTM-105P25M IC ID 6254A-105P25I/R Emission Designator(s) 8MHz 8M7W7D 16MHz 17M2W7D 32MHz 34M5W7D 64MHz* 67M9W7D * For the EX-5 Series, a firmware option may be required to enable 64 MHz BW. 5xxxxxxx 2007-06-29 12 Exalt Communications, Inc. Exalt EX-5 Series Module Guide EX-5 System Specifications, 5.8 GHz Band Frequency Band 5725 to 5850 MHz Tunable Range 5731 to 5844 MHz Output Power (at full power) +24dBm (0.25W), Mode 1 +21dBm (0.13W), Mode 2 Output Power (at minimum power) +4dBm Selectable Channel Bandwidths Receiver Threshold (BER=10-6) 8MHz, 16MHz, 32MHz*, 64MHz* (dBm) Mode 1 Mode 2 8MHz -86 -78 16MHz -83 -75 32MHz -80 -72 64MHz* -77 -69 Maximum RSL Mode 1: -25dBm error-free; 0dBm no damage Non-overlapping channels 8MHz: 15; 16MHz: 7; 32MHz: 3; 64MHz*: 1 Regulatory Compliance FCC 15.247; IC RSS-210; EN 302 502 Contains FCC ID TTM-105P25M IC ID 6254A-105P25I/R Emission Designator(s) 8MHz 9M1W7D 16MHz 16M5W7D 32MHz 31M8W7D 64MHz* 61M6W7D * For the EX-5 Series, a firmware upgrade may be required to enable 64 MHz BW. 5xxxxxxx 2007-06-29 13 Exalt Communications, Inc. Exalt EX-5 Series Guide Copyright Notices This section present copyright notices for third-party software licensed to Exalt Communications, Inc. Net-SNMP The following copyright notice applies to the open-source licensing agreement for Net-SNMP. Copyright 1989, 1991, 1992 by Carnegie Mellon University Derivative Work - 1996, 1998-2000 Copyright 1996, 1998-2000 The Regents of the University of California All Rights Reserved Permission to use, copy, modify and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appears in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of CMU and The Regents of the University of California not be used in advertising or publicity pertaining to distribution of the software without specific written permission. CMU AND THE REGENTS OF THE UNIVERSITY OF CALIFORNIA DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL CMU OR THE REGENTS OF THE UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM THE LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 5xxxxxxx 2007-06-29 14 Exalt Communications, Inc. Exalt EX-5 Series Module Guide Network Associates Technology, Inc. Copyright (c) 2001-2003, Networks Associates Technology, Inc All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the Networks Associates Technology, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Cambridge Broadband, Ltd. Portions of this code are copyright (c) 2001-2003, Cambridge Broadband Ltd. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * The name of Cambridge Broadband Ltd. may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 5xxxxxxx 2007-06-29 15 Exalt Communications, Inc. Exalt EX-5 Series Guide TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Sun Microsystems, Inc. Copyright © 2003 Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, California 95054, U.S.A. All rights reserved. Use is subject to license terms below. This distribution may include materials developed by third parties. Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the Sun Microsystems, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 5xxxxxxx 2007-06-29 16 Exalt Communications, Inc. Exalt EX-5 Series Module Guide Sparta, Inc. Copyright (c) 2003-2005, Sparta, Inc All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Sparta, Inc nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Cisco, Inc. Copyright (c) 2004, Cisco, Inc and Information Network Center of Beijing University of Posts and Telecommunications. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Cisco, Inc, Beijing University of Posts and Telecommunications, nor the names of their contributors may be used to endorse or promote products derived from this software without specific prior written permission. 5xxxxxxx 2007-06-29 17 Exalt Communications, Inc. Exalt EX-5 Series Guide THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Fabasoft R&D Software GmbH & Co. Copyright (c) Fabasoft R&D Software GmbH & Co KG, 2003 oss@fabasoft.com Author: Bernhard Penz Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * The name of Fabasoft R&D Software GmbH & Co KG or any of its subsidiaries, brand or product names may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 5xxxxxxx 2007-06-29 18 Exalt Communications, Inc. Exalt EX-5 Series Module Guide Appendix A - Regulatory Compliance General Regulatory Notices Exalt’s EX-5 Series products are equipped with base software that does not include Regulatory License Key (RLK) information. The professional installer is required to enter the License Key based on regional regulations. License keys are issued by serial number, it is important that the license key used for installing the radio is the correct license key for the serial number on the product. Dynamic Frequency Selection Dynamic Frequency Selection (DFS) may be required by regional legislation in some frequency bands in order to avoid causing interference to radar systems. Prior to the start of any transmission, the device equipped with DFS monitors the spectrum and is not permitted to transmit on a part of the spectrum that is already in use for radar transmissions for a period of 30 minutes. During operation of the device, the spectrum is continually monitored by the DFS to detect if radar begins transmission on a frequency that is being used by the device to transmit on. If the DFS software detects radar, the device must move off channel within a specified time period so that the device transmission does not interfere with the radar transmission. The device equipped with DFS is required to stay off that part of the spectrum for a minimum of 30 minutes, after which time the device may then check the spectrum for radar transmissions and begin transmitting if no radar is detected. Antennas Table 2 lists antennas recommended for use with the EX-5 Series radios. In some countries, antennas exceeding a certain level of gain may be unlawful. 5xxxxxxx 2007-06-29 19 Exalt Communications, Inc. Exalt EX-5 Series Guide Table 2 lists antennas supported by the EX-5 family of Digital Microwave Radios. Table 2 EX-5 supported antennas Manufacturer Model # Description Mid-band Gain dBi (mid-band) 3dB (Azimuth/Elevation) Beamwidth (degrees) Andrew P2F-52-N 2-foot Dish 29.4 5.4 Andrew P3F-52-N 3-foot Dish 33.4 3.8 Andrew P4F-52-NXA 4-foot Dish 34.9 3.0 Andrew P6F-52-NXA 6-foot Dish 37.6 1.8 Andrew HP2F-52-NPA 2-foot HP Dish 29.0 5.4 Andrew HP3F-52-NPA 3-foot HP Dish 33.0 3.8 Andrew HP4F-52-NPA 4-foot HP Dish 34.5 3.0 Andrew HP6F-52-NPA 6-foot HP Dish 37.2 1.8 Andrew FPA5250D06-N 6-inch Panel 18.0 19.3 Andrew FPA5250D12-N 1-foot Panel 23.6 9.6 Gabriel DFPS.5-52 6-inch Panel 18.0 19.0 Gabriel DFPD1-52 1-foot Panel 23.5 9.4 Gabriel DFPD2-52 2-foot Panel 28.0 4.6 Gabriel QF2-52-N 2-foot Dish 28.5 5.6 Gabriel QF2.5-52-N 2.5-foot Dish 31.2 4.4 Gabriel QF4-52-N 4-foot Dish 34.8 2.7 Gabriel QF6-52N 6-foot Dish 37.8 1.9 Gabriel HQF2-52-N 2-foot HP Dish 28.2 5.7 Gabriel HQF4-52-N 4-foot HP Dish 34.4 2.8 Gabriel HQF6-52-N 6-foot HP Dish 37.4 1.9 MTI MT-485001 7.5-inch Panel 19.0 18.0 MTI MT-485002 1-foot Panel 23.0 9.0 MTI MT-486004 18-inch Panel 26.0 6.0 MTI MT-486001 2-foot Panel 28.0 4.5 Radio Waves FP.5-5-18 6-inch Panel 18.0 20.0 Radio Waves FP1-5-24 1-foot Panel 23.8 10.0 Radio Waves FP2-5-28 2-foot Panel 28.0 4.5 Radio Waves SP1-5.2 1-foot Dish 22.5 11.1 Radio Waves SP2-5.2 2-foot Dish 29.0 6.1 Radio Waves HP2-5.2 2-foot HP Dish 28.6 6.1 Radio Waves SP3-5.2 3-foot Dish 32.0 4.0 Radio Waves SP4-5.2 4-foot Dish 34.8 3.0 Radio Waves SP6-5.2 6-foot Dish 37.9 2.0 RFS SPF2-52A 2-foot Dish 27.9 6.2 RFS SPF3-52A 3-foot Dish 31.4 4.2 RFS SPF4-52A 4-foot Dish 33.9 3.1 RFS SPF6-52A 6-foot Dish 37.4 2.1 RFS SDF4-52A 4-foot HP Dish 33.9 3.1 5xxxxxxx 2007-06-29 20 Exalt Communications, Inc. Exalt EX-5 Series Module Guide Manufacturer Model # Description Mid-band Gain dBi (mid-band) 3dB (Azimuth/Elevation) Beamwidth (degrees) RFS SDF6-52A 6-foot HP Dish 37.4 2.1 RFS MA0528-19AN 7.5-inch Panel 19.0 18.0 RFS MA0528-23AN 1-foot Panel 23.0 9.0 RFS MA0528-28AN 2-foot Panel 28.0 4.5 5xxxxxxx 2007-06-29 21 Exalt Communications, Inc. Exalt EX-5 Series Guide Region 1 Specifics Region 1 is designated for USA and Canada installations. Note: The professional installer is responsible to ensure that RF output power is properly adjusted to not exceed the regulatory limit. Federal Communications Commission (FCC), United States The device is allowed to be used provided it does not cause interference to other devices. It is not guaranteed to provide protection against interference from other electronic and radio devices. The system has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC regulations. Changes or modifications not expressly approved in writing by Exalt may void the user’s authority to operate this equipment. This device must be professionally installed. To comply with regulations, the output power of this device may need to be adjusted in accordance to the associated transmission system. The antenna associated with the EX-5 family shall be mounted in a location that is at least 10’/3m away from humans that may be subject to long-term or continuous exposure. Important: Where required by regional regulations, DFS is enabled by the system keys and cannot be disabled. 5xxxxxxx 2007-06-29 22 Exalt Communications, Inc. Exalt EX-5 Series Module Guide United States Compliance The EX-5 product families operate under FCC Rule Parts 15.247 and/or 15.407 as a license-exempt device. They may only be used as a point-to-point transmission device for fixed or temporary-fixed (non-mobile) installations. The devices are subject to the following restrictions: • Do not use external amplifiers to boost the power or overcome transmission system losses, unless the specific amplifier/cable/antenna combination has expressly been authorized by the FCC. The output power must never exceed +30 dBm. • Cross-border transmissions are expressly prohibited, except with written permission from both the FCC and the governing body of the neighboring country (Cofetel for Mexico; Industry Canada for Canada). • Use only parabolic dish antennas or directional flat-panel antennas. No other types of antennas (omni-directional, yagi, and so on) are authorized. Parabolic dishes of either grid or solid type are allowed. Maximum mid-band gain of each type of antenna certified is: ¶ EX-5 models: – Parabolic dish: 37.9 dBi (6'/1.8m diameter) – Directional flat panel: 28 dBi (~2'/61cm square) Industry Canada (IC), Canada This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 4. this device may not cause interference, and 5. this device must accept any interference, including interference that may cause undesired operation of the device. Antennas Supported in Canada The EX-5 family has been designed to operate with the antennas listed in Table 2 which have a maximum gain of 37.9 dBi. Antennas not included in the list or having a gain greater than 37.9 dBi are prohibited for use with this device. The required antenna impedance is 50 Ohms. The antenna associated with the EX-5 family shall be mounted in a location that is at least 10’/3m away from humans that may be subject to long-term or continuous exposure. Important: Where required by regional regulations, DFS is enabled by the system keys and cannot be disabled. 5xxxxxxx 2007-06-29 23 Exalt Communications, Inc. Exalt EX-5 Series Guide Canada Compliance EX-5 models operate under RSS-210 of Industry Canada regulations. Operation is subject to the following conditions, unless express permission is granted by Industry Canada to operate in a different manner: • External amplifiers cannot be used to boost the power or to overcome transmission system losses, unless the specific amplifier/cable/antenna combination is expressly authorized by Industry Canada. • Cross-border transmissions are expressly prohibited, except with written permission from both Industry Canada and the governing body of the neighboring country (FCC for USA) • Only parabolic dish antennas or directional flat-panel antennas may be used. No other types of antennas (omni-directional, yagi, and so on) are authorized. Parabolic dishes of either grid or solid type are allowed. Maximum gain of each type of antenna allowed is: ¶ EX-5 models: – Parabolic dish: 37.9 dBi (6'/1.8m diameter) – Directional flat panel: 28 dBi (~2'/61cm square) EX-5 EIRP for the US and Canada 5250-5350 MHz Band For the EX-5 models within the 5250–5350 MHz band, the maximum transmit power is 30 dBm. The maximum output of the radio is +13 dBm. P = CP – G + L where: = Maximum transmitter output power of radio, in dBm CP = Maximum Conducted Power of transmitter output power of radio, in dBm 5xxxxxxx 2007-06-29 = Specified gain of antenna, in dBi, from 5250 to 5350 MHz = Total transmission system losses of all elements between the radio’s RF connector and the antenna’s RF connector (all cables, connectors, lightning suppressors), in dB, as specified or measured between 5250 and 5350 MHz 24 Exalt Communications, Inc. Exalt EX-5 Series Module Guide 5470-5725 MHz Band For the EX-5 models within the 5470-5725 MHz band, the maximum EIRP allowed is 30 dBm. The maximum output power of the radio is +13 dBm. P = CP – G + L where: = Maximum transmitter output power of radio, in dBm CP = Maximum Conducted Power of transmitter output power of radio, in dBm = Specified gain of antenna, in dBi, from 5470 to 5725 MHz = Total transmission system losses of all elements between the radio’s RF connector and the antenna’s RF connector (all cables, connectors, lightning suppressors), in dB, as specified or measured between 5470 and 5725 MHz 5725-5850 MHz Band For the EX-5 models within the 5725–5850 MHz band, the maximum EIRP allowed is 61.9 dBm. The maximum output power of the radio is +24 dBm in Mode 1 and +21 dBm in Mode 2. P = CP – G + L where: = Maximum transmitter output power of radio, in dBm CP = Maximum Conducted Power of transmitter output power of radio, in dBm 5xxxxxxx 2007-06-29 = Specified gain of antenna, in dBi, from 5725 to 5850 MHz = Total transmission system losses of all elements between the radio’s RF connector and the antenna’s RF connector (all cables, connectors, lightning suppressors), in dB, as specified or measured between 5725 and 5850 MHz 25 Exalt Communications, Inc. Exalt EX-5 Series Guide Region 2 Specifics The countries that are covered by this region are: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Great Britain, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Norway, Poland, Portugal, Slovak Republic, Slovenia, Spain, Sweden, Netherlands, Switzerland, and Turkey. Note: The professional installer is responsible to ensure that RF output power is properly adjusted to not exceed the regulatory limit. Europe/ITU (ETSI and CE Mark) The EX-5 family complies with ETS 301 893 for the 5.3 and 5.47 GHz bands for licenseexempt use for most countries recognizing ETSI or ITU band assignments. This band is not yet harmonized for all countries recognizing ETSI or ITU band assignments These bands require Dynamic Frequency Selection (DFS) and Transmitter Power Control (TPC) for radar-detection and avoidance. There is a +30dBm EIRP limit applied to this band. Transmitter power must be adjusted accordingly with respect to the RF cabling losses and antenna gains associated with each terminal. The EX-5 family complies with ETS 302 502 for the 5.8 GHz band. This band is not yet harmonized for all countries recognizing ETSI or ITU band assignments. Consult the individual country regulations or your Exalt Communications representative for details. This band requires DFS and TPC for radar-detection and avoidance. There is a +33dBm EIRP limit for use of the 10MHz BW setting (called 8MHz on GUI), and a +36dBm EIRP limit for use of the 20MHz BW setting (called 16MHz on GUI). All models comply with the requirements for CE Mark (EN 60950-1 and IEC 60950-1) and EMC (EN 301 489-17). No substitutions shall be made, and all wiring and grounding instructions contained in this manual must be followed to ensure safety in accordance to the standards. 5xxxxxxx 2007-06-29 26 Exalt Communications, Inc. Exalt EX-5 Series Module Guide Declaration of Conformity to the R&TTE Directive 1999/5/EC English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Deutsch: Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprecheneden Vorgaben der Richtlinie 1999/5/EU. Dansk: Dette udstyr er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i Directiv 1999/5/EF. Español: Este equipo cumple con los requisitos esenciales asi como con otras disposiciones de la Directive 1999/5/EC. ¸ëëçíáò: Áõôüò ï åîïðëéóìüò óõììïñöþíåôáé ìå ôéò ïõóéþäåéò áðáéôÞóåéò êáé ôéò ëïéðÝò äéáôÜîåéò ôçò Ïäçãßáò 1999/5/EÊ. Français: Cet appareil est conforme aux exigencies essentialles et aux autres dispositions pertinantes de la Directive 1999/5/EC. Íslenska: Þessi búnaður samrýmist lögboðnum kröfum og öðrum ákvæðum tilskipunar 1999/5/ESB. Italiano: Questo apparato é conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/EC. Nederlands: Deze apparatuur voldoet aan de belangrijkste eisen en andere voorzieningen van richtlijn 1999/5/EC. Norsk: Dette utstyret er i samsvar med de grunnleggende krav og andre relevante bestemmelser i EUdirectiv 1999/5/EC. Português: Este equipamento satisfaz os requisitos essenciais e outras provisões da Directiva 1999/5/EC. Suomalainen: Tämä laite täyttää direktiivin 1999/5/EY oleelliset vaatimukset ja on siinä asetettujen muidenkin ehtojen mukainen. Svenska: Denna utrustning är i överensstämmelse med de väsentliga kraven och andra relevanta bestämmelser i Direktiv 1999/5/EC. For 5 GHz radios, the following standards were applied: • Radio: EN 301 893, EN 302 502 • EMC: EN 301 489-1, EN 301 489-17 • Safety: EN 60950-1, IEC 60950-1 The following CE mark is affixed to the product: EU WEEE Exalt is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) Directive. The Directives require producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 13 August 2005. Exalt products that are within the scope of the Directives are labeled with a crossed-out "wheelie-bin" symbol as required by the Directives. This indicates that the product was placed on the market after 13 August 2005 and that end-users should segregate the product from other wastes at end-of-life. The WEEE Directives are being implemented in each of the 28 EU and European Economic Area (EAA) countries through national legislation. This has resulted in considerable variation in the detailed requirements across the EU, many of which require presence in the EU. As a result, Exalt’s WEEE compliance approach is to require the 5xxxxxxx 2007-06-29 27 Exalt Communications, Inc. Exalt EX-5 Series Guide distributors and/or resellers in the EU to comply with each country’s national legislation by registration of the distributor or reseller as the producer and for the reseller/distributor to carry out and fulfill the legislative requirements of each national compliance scheme. Below is the crossed out wheelie bin symbol as required by the WEEE Directive. EU RoHS RoHS is the acronym used to refer to the European Union (EU) Directive 2002/95/EC on the Restriction of the use of certain hazardous substances in electrical and electronic equipment. Hazardous materials are those chemicals and substances that are legislatively, market, or customer banned or restricted for use in products and/or manufacturing. There are six (6) RoHS substances: lead (Pb), cadmium (Cd), mercury (Hg), hexavalent chromium (Cr+6), polybrominated biphenyls (PBB) and polybrominated diphenylethers (PBDE). Other countries may be introducing legislation that results in similar restrictions of hazardous substances. Many Exalt products will continue to use lead-based solder under the exemption allowed for network infrastructure equipment. Small amounts of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE can also be found in a few electrical and electrical components. Europe Compliance The EX-5 family operates under EN 301 893 and EN 302 502 rules as a license-exempt device. All of these permitted devices must be professionally installed. They may only be used as a point-to-point transmission device for fixed or temporary-fixed (non-mobile) installations. The devices are subject to the following restrictions: • Do not use external amplifiers to boost the power or overcome transmission system losses, unless the specific amplifier/cable/antenna combination has expressly been authorized by the specific country regulations. The output power must never exceed that specified. • Use only parabolic dish antennas or directional flat-panel antennas. No other types of antennas (omni-directional, yagi, and so on) are authorized. Parabolic dishes of either grid or solid type are allowed. Maximum mid-band gain of each type of antenna certified is: ¶ EX-5 models: 5xxxxxxx 2007-06-29 28 Exalt Communications, Inc. Exalt EX-5 Series Module Guide – Parabolic dish: 37.9 dBi (6'/1.8m diameter) – Directional flat panel: 28 dBi (~2'/61cm square) 5xxxxxxx 2007-06-29 29 Exalt Communications, Inc. Exalt EX-5 Series Guide EX-5 EIRP by Country Table 13 summarizes the maximum power by band and country for Exalt’s EX-5 series products. 5250–5350 MHz band For the EX-5 models within the 5250–5350 MHz band, the maximum transmit power is 23 dBm. The maximum output of the radio is +13 dBm. P = CP – G + L where: = Maximum transmitter output power of radio, in dBm CP = Maximum Conducted Power of transmitter output power of radio, in dBm = Specified gain of antenna, in dBi, from 5250 to 5350 MHz = Total transmission system losses of all elements between the radio’s RF connector and the antenna’s RF connector (all cables, connectors, lightning suppressors), in dB, as specified or measured between 5250 and 5350 MHz 5470–5725 MHz band For the EX-5 models within the 5470-5725 MHz band, the maximum EIRP allowed is 30 dBm. The maximum output power of the radio is +13 dBm. P = CP – G + L where: = Maximum transmitter output power of radio, in dBm CP = Maximum Conducted Power of transmitter output power of radio, in dBm 5xxxxxxx 2007-06-29 = Specified gain of antenna, in dBi, from 5470 to 5725 MHz = Total transmission system losses of all elements between the radio’s RF connector and the antenna’s RF connector (all 30 Exalt Communications, Inc. Exalt EX-5 Series Module Guide cables, connectors, lightning suppressors), in dB, as specified or measured between 5470 and 5725 MHz 5725-5850 MHz band For the EX-5 models, within the 5725-5850 MHz band, the maximum transmit power with respect to specific country EIRP regulations is determined based on the channel bandwidth. The EIRP power limit is 33 dBm for 10 MHz channels and 36 dBm for 20 MHz channels. The Exalt EX-5 series maximum transmitter conducted power is +24 dBm. Use the following equation to determine the EIRP: P = CP – G + L where: = Maximum transmitter output power of radio, in dBm CP = Maximum Conducted Power of transmitter output power of radio, in dBm = Specified gain of antenna, in dBi, from 5725-5850 MHz = Total transmission system losses of all elements between the radio’s RF connector and the antenna’s RF connector (all cables, connectors, lightning suppressors), in dB, as specified or measured between 5725 and 5850 MHz 5xxxxxxx 2007-06-29 31 Exalt Communications, Inc. Exalt EX-5 Series Guide Table 3 Region 2 Country Specific Power Levels for EX-5 Series Country Maximum EIRP Output Power, 5.3 GHz band Maximum EIRP Output Power, 5.4 GHz band Maximum EIRP Output Power, 5.8 GHz band (BW dependent) see note Austria 23 dBm 30 dBm 5 dBm Belgium 30 dBm Cyprus 23 dBm 30 dBm Czech Republic 23 dBm 30 dBm 5 dBm Denmark 23 dBm 30 dBm 33/36 dBm Estonia 23 dBm 30 dBm Finland 23 dBm 30 dBm France 23 dBm 30 dBm 33/36 dBm Germany 23 dBm 30 dBm 33/36 dBm Great Britain 23 dBm 30 dBm 33/36 dBm Hungary 23 dBm 30 dBm 33/36 dBm Iceland 23 dBm 30 dBm 33/36 dBm Ireland 23 dBm 30 dBm 33/36 dBm Italy 23 dBm 30 dBm 33/36 dBm Liechtenstein 23 dBm 30 dBm 5 dBm Lithuania 23 dBm 30 dBm 33/36 dBm Luxembourg 23 dBm 30 dBm Netherlands 23 dBm 30 dBm 33/36 dBm Norway 23 dBm 30 dBm 33/36 dBm Poland 23 dBm 30 dBm 33/36 dBm Portugal 23 dBm 30 dBm 5 dBm Romania 23 dBm 30 dBm 33/36 dBm Slovak Republic 23 dBm 30 dBm 5 dBm Slovenia 33/36 dBm Sweden 23 dBm 30 dBm 33/36 dBm Switzerland 23 dBm 30 dBm 5 dBm Turkey 23 dBm 30 dBm 33/36 dBm Note 1: If the output power is designated as 33/36 dBm, the EIRP is limited to 33 dBm for 10 MHz bandwidth transmissions and 36 dBm for 20 MHz bandwidth transmissions. 5xxxxxxx 2007-06-29 32 Exalt Communications, Inc. Exalt EX-5 Series Module Guide Index antennas EX-5 Canada, 23 US, 20 radio default settings, 8 Radio A, 8 regulatory requirements EX-5 FCC EIRP, 25 USA, 23 regulatory rquirements Canada, 24 contact information, 7 dimensions, 10 documentation, related, 7 5xxxxxxx 2007-06-29 specifications, 10 system specifications, 10 33 Exalt Communications, Inc. Exalt EX-5 Series Guide © 2007 Exalt Communications Inc. 580 Division St. Campbell, CA 95008 USA) 5xxxxxxx 2007-06-29
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2007:06:29 14:36:26-07:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2007:06:29 14:36:26-07:00 Format : application/pdf Title : Microsoft Word - manual_LMA.doc Creator : lmoratti Document ID : uuid:767dc501-a85a-4a86-a8b1-4098fc243335 Instance ID : uuid:030726cf-c850-4382-98e4-201886b5edcb Page Count : 36 Author : lmorattiEXIF Metadata provided by EXIF.tools