Extreme Networks OAP36A HiPath Wireless Outdoor Access Point User Manual 9034581 AP3660 QuickInstGde print

Download:
Mirror Download [FCC.gov]
Document ID	1341955
Application ID	xHwhhe0pdTX0Rfzz1YAw9Q==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	45.54kB (569274 bits)
Date Submitted	2010-09-13 00:00:00
Date Available	2010-09-13 00:00:00
Creation Date	2004-12-17 11:57:16
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2010-09-13 10:57:11
Document Title	9034581_AP3660_QuickInstGde_print.fm
Document Creator	FrameMaker 8.0
Document Author:	mschatzk

17x11 bleed template; DragonNotice; large text
Installing the Enterasys Wireless Outdoor
AP3660
Electrical Hazard: Only qualified personnel should perform installation
procedures.
For complete installation instructions and information
about the Enterasys Wireless Outdoor AP3660, see the
Enterasys Wireless Outdoor AP3660 Installation Guide at http:/
/www.enterasys.com/support/manuals.
Overview of the Enterasys Wireless Outdoor
AP3660
The Enterasys Wireless Outdoor AP enables you to extend
your Wireless LAN beyond the boundaries of indoor
locations. They are resistant to harsh outdoor conditions
and extreme temperatures. Using the advanced wireless
distribution mesh feature of Enterasys Wireless LAN, the
Enterasys Wireless Outdoor AP3660 can extend your
Wireless LAN to outdoor locations without Ethernet
cabling. A mounting bracket is available to enable quick
and easy mounting of the Enterasys Wireless Outdoor APs
to walls and poles.
Figure 1
Enterasys Wireless Outdoor AP3660
Antenna Connectors
• 4 spring washers
• 1 ground screw
• RJ45 waterproof connector assembly
• A printed copy of the Enterasys Wireless Outdoor Access
Point Quick Reference ‐ AP3660
Figure 4
AP3660 - Pole Mount Option 1
You can power up the AP in one of the following ways:
Note: Before you start mounting the Enterasys Wireless Outdoor
AP3660, read the Safety Guidelines below.
Mounting and Connecting the Enterasys
Wireless Outdoor AP3660
Mounting and connecting the Enterasys Wireless Outdoor
AP3660 can be accomplished easily and safely by following
the instructions in the full Enterasys Wireless Outdoor Access
Point AP3660 Installation Guide. The installation of the
Outdoor AP should be performed by a professional
installer to ensure proper operation and compliance with
safety guidelines.
Figure 5
AP3660 - Pole Mount Option 2
Figure 6
AP3660 - Pole Mount Option 3
Mounting the Outdoor AP3660:
1. Attach the mounting bracket to the AP3660 using four
M6 screws and washers. You can attach the bracket to the
AP in either the vertical or horizontal position as shown
in Figures 2 and 3.
Figure 2
Connecting and powering the AP
• Power over Ethernet: Adding PoE injector
You can provide power to the Ethernet cable with a PoE
injector. The PoE injector must be 802.3at compliant. The
PoE injector is not provided with the AP.
A waterproof RJ45 connector is provided to connect the
PoE injector to the AP3660. You must connect the RJ45
connector to the RJ45 cable. For instructions, refer to the
full Enterasys Wireless Outdoor Access Point AP3660
Installation Guide.
• Power by external power supply:
You can purchase an external power supply unit (WS‐
PS3660‐MR) to power the AP. See your Enterasys sales
representative for details.
For power supply installation instructions, refer to the
Enterasys Wireless Outdoor Access Point AP3660 Installation
Guide.
Regulatory and Compliance information
Federal Communications Commission (FCC) Notice:
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:(1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Mounting Bracket - Vertical Position
Warning: Changes or modifications made to this device which are
not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment
b.Mount the AP3660 and the attached mounting bracket
to a wall using four wood/gyprock screws as shown in
Figure 7.
Figure 3
The Enterasys Wireless Outdoor AP3660 supports the
902.11n, 802.11a, 802.11g, and full backward compatibility
with legacy 802.11b devices. The Enterasys Wireless
Outdoor AP3660 with external antenna connectors
supports a variety of antennas, providing range and
coverage versatility.
The Enterasys Wireless Outdoor AP3660 interoperates fully
with Enterasys Wireless LAN, including support for
VoWLAN, branch office mode, guest services, RTLS,
availability and mobility features.
Unpacking the Enterasys Wireless Outdoor AP3660
Unpack the AP from its carton. The following components
are supplied with the Enterasys Wireless Outdoor AP3660
package
• 1 mounting bracket
• 2 stainless steel tie back straps that support pole
diameters up to 4 inches
• 4 M6 screws
• 4 washers
Mounting Bracket - Horizontal Position
Figure 7
AP3660 - Wall Mount
Industry Canada Notice:
This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus set out in the
Radio Interference Regulations for the Canadian
Department of Communications.
Le présent appareil numérique n’émet pas de bruits
radioĂŠlectriques dĂŠpassant les limites applicables aux
appareils numĂŠriques de la class B prescrites dans le
Règlement sur le brouillage radioÊlectrique ÊdictÊ par le
ministère des Communications du Canada.
Refer to the HiPath Wireless Controller, Access Points, and
Convergence Software User Guide Installation Guide,
Appendix B, ĘşRegulatory information,Ęş for complete
regulatory information.
2. You can mount the AP3660 to either a pole or a wall:
a. To mount the AP3660 with the attached mounting
bracket to a pole, use the supplied stainless steel tie
back straps.
You can mount the AP3660 to a pole in one of three
possible configurations, as shown in Figures 4, 5, and 6.
3. Install the external antenna intended for area coverage.
For information about antenna selection and installation,
refer to the External Antenna Site Preparation and
Installation Guide.
4. Attach the external antenna cables to the RP‐N
connectors on the AP.
17x11 bleed template; DragonNotice; large text
Hazardous Substances
Safety Guidelines
This section contains notices that you have to adhere to
ensure your personal safety and to prevent any damage to
the equipment.
Qualified Personnel:
Electrical Hazard: Only qualified personnel should perform
installation procedures. Within the context of the safety notes in
this documentation qualified persons are defined as persons who
are authorized to commission, ground and label devices, systems
and circuits in accordance with established safety practices and
standards. A qualified person understands the requirements risks
involved with installing outdoor electrical equipment in accordance
with national codes.
Grounding Warning:
Warning: To operate the Enterasys Wireless Outdoor AP3660
safely, the chassis ground connector must have a suitable cable
connected. Do not use the Enterasys Wireless Outdoor AP3660
without a ground cable connected.
Lightning Protection Warning:
Warning: Antennas installed outdoors must be within the area
covered by a lightning protection system. Make sure that all
conducting systems entering from outdoors can be protected by a
lightning protection potential equalization system.When
implementing your lightning protection concept, make sure you
adhere to the VDE 0182 or IEC 62305 standard.
The AP3660 has a built-in lightning protector; no external lightning
protector is required. You must however note that the lightning
protector is not an adequate protection against a lightning strike.
The lightening protector only works within the framework of a
comprehensive lightning protection concept. If you have
questions, ask a qualified specialist company.
This product complies with the requirements of European
Directive, 2002/95/EC, Restriction of Hazardous Substances
(RoHS) in Electrical and Electronic Equipment.
European Waste Electrical and Electronic
Equipment (WEEE) Notice
ENTERASYS and ENTERASYS NETWORKS and any logos
associated therewith, are trademarks or registered trademarks of
Enterasys Networks, Inc., in the United States and/or other
countries. For a complete list of Enterasys trademarks, see http://
www.enterasys.com/company/trademarks.aspx.
All other product names mentioned in this document may be
trademarks or registered trademarks of their respective
companies.
Enterasys Wireless
Outdoor Access Point
In accordance with Directive 2002/96/EC of the European
Parliament on waste electrical and electronic equipment (WEEE):
Quick Reference
1. The symbol above indicates that separate collection of electrical
and electronic equipment is required and that this product was
placed on the European market after August 13, 2005, the date
of enforcement for Directive 2002/96/EC.
2. When this product has reached the end of its serviceable life, it
cannot be disposed of as unsorted municipal waste. It must be
collected and treated separately.
3. It has been determined by the European Parliament that there
are potential negative effects on the environment and human
health as a result of the presence of hazardous substances in
electrical and electronic equipment.
4. It is the users’ responsibility to utilize the available collection
system to ensure WEEE is properly treated.
For information about the available collection system, please go
to www.enterasys.com/services/support/ or contact Enterasys
Customer Support at 353 61 705586 (Ireland).
AP3660
Declaration of Conformity
A “Declaration of Conformity” in accordance with the preceding
directives and standards has been made and is on file at Dell Inc.
Products Europe BV, Limerick, Ireland.
ѻક䇈ᯢк䰘ӊ
Supplement to Product Instructions
䚼ӊৡ⿄
(Parts)
䞥ሲ䚼ӊ
(Metal Parts)
⬉䏃῵ഫ
(Circuit Modules)
⬉㓚ঞ⬉㓚㒘ӊ
(Cables & Cable Assemblies)
ล᭭੠㘮ড়⠽䚼ӊ
(Plastic and Polymeric parts)
⬉䏃ᓔ݇
(Circuit Breakers)
ƻ˖
䪙
3E
᳝↦᳝ᆇ⠽䋼៪‫ܗ‬㋴(Hazardous Substance)
∲
䬝
݁Ӌ䫀
໮⒈㘨㣃
+J
&G
&U
3%%
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
໮⒈Ѡ㣃䝮
3%'(
㸼⼎䆹᳝↦᳝ᆇ⠽䋼೼䆹䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ৿䞣ഛ೼ SJ/T 11363-2006 ᷛ‫ޚ‬㾘ᅮⱘ䰤䞣㽕∖ҹϟDŽ
Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is
below the relevant threshold of the SJ/T 11363-2006 standard.
h˖
㸼⼎䆹᳝↦᳝ᆇ⠽䋼㟇ᇥ೼䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ёⱘ৿䞣䍙ߎSJ/T 11363-2006 ᷛ‫ޚ‬㾘ᅮⱘ䰤䞣㽕∖DŽ
Indicates that the concentration of the hazardous substance of at least one of all homogeneous
materials in the parts is above the relevant threshold of the SJ/T 11363-2006 standard.
ᇍ䫔ଂП᮹ⱘ᠔ଂѻકᴀ㸼ᰒ⼎
߃߯կᑨ䫒ⱘ⬉ᄤֵᙃѻકৃ㛑ࣙ৿䖭ѯ⠽䋼DŽ⊼ᛣ೼᠔ଂѻકЁৃ㛑Ӯгৃ㛑ϡӮ৿᳝᠔᳝᠔߫ⱘ䚼ӊDŽ
This table shows where these substances may be found in the supply chain of Enterasys’ electronic
information products, as of the date of sale of the enclosed product. Note that some of the component types
listed above may or may not be a part of the enclosed product.
䰸䴲঺໪⡍߿ⱘᷛ⊼ℸᷛᖫЎ䩜ᇍ᠔⍝ঞѻકⱘ⦃ֱՓ⫼ᳳᷛᖫᶤѯ䳊䚼ӊӮ
᳝ϔϾϡৠⱘ⦃ֱՓ⫼ᳳ ՟བ⬉∴ऩ‫ܗ‬῵ഫ 䌈೼݊ѻકϞ
ℸ⦃ֱՓ⫼ᳳ䰤া䗖⫼Ѣѻકᰃ೼ѻક᠟‫ݠ‬Ё᠔㾘ᅮⱘᴵӊϟᎹ԰
The Environmentally Friendly Use Period (EFUP) for all enclosed products and their parts
are per the symbol shown here, unless otherwise marked. Certain parts may have a
different EFUP (for example, battery modules) and so are marked to reflect such. The
Environmentally Friendly Use Period is valid only when the product is operated under the
conditions defined in the product manual.
50
Notice
Enterasys Networks reserves the right to make changes in
specifications and other information contained in this document
and its Web site without prior notice. The reader should in all
cases consult Enterasys Networks to determine whether any such
changes have been made.
The hardware, firmware, or software described in this document
is subject to change without notice.
IN NO EVENT SHALL Enterasys Networks BE LIABLE FOR
ANY INCIDENTAL, INDIRECT, SPECIAL, OR
CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING
BUT NOT LIMITED TO LOST PROFITS) ARISING OUT OF OR
RELATED TO THIS DOCUMENT, WEB SITE, OR THE
INFORMATION CONTAINED IN THEM, EVEN IF Enterasys
Networks HAS BEEN ADVISED OF, KNEW OF, OR SHOULD
HAVE KNOWN OF, THE POSSIBILITY OF SUCH DAMAGES.
Enterasys Networks, Inc.
50 Minuteman Road
Andover, MA 01810
Š 2010 Enterasys Networks, Inc. All rights reserved.
Part Number: 9034581 September 2010
P/N 9034581
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
● Consult the dealer or an experienced radio/TV technician for help.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of
other channels is not possible.
This device and its antenna(s) must not be co-located or operation in conjunction with any other
antenna or transmitter.
FCC NOTICE: To comply with FCC part 15 rules in the United States, the system must be
professionally installed to ensure compliance with the Part 15 certification. It is the
responsibility of the operator and professional installer to ensure that only certified
systems are deployed in the United States. The use of the system in any other
combination (such as co-located antennas transmitting the same information) is
expressly forbidden.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 100cm between the radiator &
your body.
IMPORTANT NOTE:
This module is intended for OEM integrator only and limited to host with brand: enterasys and model:
WS-AP3660. The OEM integrator is still responsible for the FCC compliance requirement of the end
product, which integrates this module.
100cm minimum distance has to be able to be maintained between the antenna and the users for the
host this module is integrated into. Under such configuration, the FCC radiation exposure limits set
forth for a population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 100cm
separation with the antenna while this end product is installed and operated. The end user has to be
informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be
satisfied. The end user has to also be informed that any changes or modifications not expressly
approved by the manufacturer could void the user's authority to operate this equipment.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC ID:
QXO-OAP36A ". The FCC part 15.19 statement below has to also be available on the label: This
device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IC Statement
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired operation of
the device.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of
other channels is not possible.
This device and its antenna(s) must not be co-located or operation in conjunction with any other
antenna or transmitter.
To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p) is not more than that permitted for
successful communication.
This device has been designed to operate with the antennas listed below, and having a maximum gain
of [23] dB. Antennas not included in this list or having a gain greater than [23] dB are strictly prohibited
for use with this device. The required antenna impedance is 50 ohms.
The device could automatically discontinue transmission in case of absence of information to transmit,
or operational failure. Note that this is not intended to prohibit transmission of control or signaling
information or the use of repetitive codes where required by the technology.
The maximum antenna gain permitted (for devices in the bands 5250-5350 MHz and 5470-5725 MHz)
to comply with the e.i.r.p. limit.
High-power radars are allocated as primary users (meaning they have priority) of the bands
5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to
LE-LAN devices.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 100cm between
the radiator & your body.
IMPORTANT NOTE:
This module is intended for OEM integrator only and limited to host with brand: enterasys and model:
WS-AP3660. The OEM integrator is still responsible for the IC compliance requirement of the end
product, which integrates this module.
20cm minimum distance has to be able to be maintained between the antenna and the users for the
host this module is integrated into. Under such configuration, the IC RSS-102 radiation exposure limits
set forth for a population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 100cm
separation with the antenna while this end product is installed and operated. The end user has to be
informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be
satisfied. The end user has to also be informed that any changes or modifications not expressly
approved by the manufacturer could void the user's authority to operate this equipment. IC statement
is required to be available in the users manual: This Class B digital apparatus complies with Canadian
ICES-003. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received, including interference that may
cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX IC:
4138A-OAP36A ".

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Mode                       : UseNone
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : FrameMaker 8.0
Modify Date                     : 2010:09:13 10:57:11+08:00
Create Date                     : 2004:12:17 11:57:16Z
Metadata Date                   : 2010:09:13 10:57:11+08:00
Format                          : application/pdf
Title                           : 9034581_AP3660_QuickInstGde_print.fm
Creator                         : mschatzk
Document ID                     : uuid:c876eb79-358c-4d11-a228-429a27cfb0d5
Instance ID                     : uuid:aaf70741-3d1e-40a1-bbaf-322731bff67a
Page Count                      : 5
Author                          : mschatzk

EXIF Metadata provided by EXIF.tools