FLYTECH TECHNOLOGY LS185200 MEDIVista 18.5 Bedside Terminal User Manual PA79 C43 v1 0
FLYTECH TECHNOLOGY CO., LTD MEDIVista 18.5 Bedside Terminal PA79 C43 v1 0
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1969609 |
| Application ID | koiYAShDJSiTWGtw9cHYZA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 64.95kB (811817 bits) |
| Date Submitted | 2013-05-21 00:00:00 |
| Date Available | 2013-05-22 00:00:00 |
| Creation Date | 2012-11-06 16:54:19 |
| Producing Software | Acrobat Distiller 9.5.2 (Windows) |
| Document Lastmod | 2012-11-06 16:54:19 |
| Document Title | Microsoft Word - PA79_C43 user manual v1.0.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | tiffanyhsu |
User Manual Version 1.0 October 2012 Terminal Hardware System Copyright 2012 All Rights Reserved Manual Version 1.0 Part Number: The information contained in this document is subject to change without notice. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. We shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language without the prior written consent of the manufacturer. TRADEMARK Intel®, Pentium® and MMX are registered trademarks of Intel® Corporation. Microsoft® and Windows® are registered trademarks of Microsoft Corporation. Other trademarks mentioned herein are the property of their respective owners. ii Safety IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. To disconnect the machine from the electrical Power Supply, turn off the power switch and remove the power cord plug from the wall socket. The wall socket must be easily accessible and in close proximity to the machine. Read these instructions carefully. Save these instructions for future reference. Follow all warnings and instructions marked on the product. Do not use this product near water. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. CE MARK This device complies with the requirements of the EEC directive 2004/108/EC with regard to “Electromagnetic compatibility” and 2006/95/EC “Low Voltage Directive” FCC This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation iii CAUTION ON LITHIUM BATTERIES There is a danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. Battery Caution Risk of explosion if battery is replaced by an incorrectly type. Dispose of used battery according to the local disposal instructions. Safety Caution Note: To comply with IEC60950-1 Clause 2.5 (limited power sources, L.P.S) related legislation, peripherals shall be 4.7.3.2 "Materials for fire enclosure" compliant. 4.7.3.2 Materials for fire enclosures For MOVABLE EQUIPMENT having a total mass not exceeding 18kg.the material of a FIRE ENCLOSURE, in the thinnest significant wall thickness used, shall be of V-1 CLASS MATERIAL or shall pass the test of Clause A.2. For MOVABLE EQUIPMENT having a total mass exceeding 18kg and for all STATIONARY EQUIPMENT, the material of a FIRE ENCLOSURE, in the thinnest significant wall thickness used, shall be of 5VB CLASS MATERIAL or shall pass the test of Clause A.1 LEGISLATION AND WEEE SYMBOL 2012/19/EU Waste Electrical and Electronic Equipment Directive on the treatment, collection, recycling and disposal of electric and electronic devices and their components. iv The crossed dustbin symbol on the device means that it should not be disposed of with other household wastes at the end of its working life. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Revision History Revision Date V1.0 October, 2012 Description vi Release Table Contents 1 Package Checklist .................................1 1-1 Standard Items .................................................................. 1 2 System View ............................................2 2-1 2-2 2-3 2-4 2-5 Front View........................................................................... 2 Side View............................................................................ 3 Rear View ........................................................................... 3 Bottom View ....................................................................... 4 Dimension.......................................................................... 4 3 System Assembly ....................................5 3-1 SSD Card Replacement..................................................... 5 4 Peripheral Installation ...........................6 4-1 4-2 Phone module Installation................................................ 6 Arm Installation ................................................................. 7 5 Specification ...........................................8 6 Jumper Settings ................................... 10 6-1 6-2 6-3 C43 motherboard layout .................................................10 Connectors & Functions..................................................11 Jumper Setting.................................................................13 7 Drivers Installation .............................. 15 1 1-1 Package Checklist Standard Items a. System b. Phone module c. Power adapter d. Power cable e. Driver CD f. Manual 2 2-1 System View Front View Number Description Build-in camera Camera LED Touch screen Touch keys (from left to right: volume down, volume up, power button, channel down, channel up) Smart IC card reader VOIP phone (optional) 2-2 Side View Number 2-3 Description Combo smart IC card reader with separate RFID antenna (optional) Speaker Rear View Number Description Light Sensor Webcam switch Ventilation SSD card door Cable cover Vertical I/O port (from left to right: Nurse call, Display port, DC jack, USBx2, LAN ) VESA hole for wall-mount kit installation 2-4 Bottom View Number Ventilation From left to right: Video in, Audio left, Audio right (optional) 2-5 Description Bottom I/O port (from let to right: LAN, USBx2, Remote, Power button) Microphone Smart IC card reader USBx1 Phone jack (RJ11) From left to right: Audio line-out, Mic-in, Audio line-out Dimension 3 3-1 System Assembly SSD Card Replacement 1. Find the SSD card door at the rear right side of the system and remove the screws(x1) 2. To replace the SSD card, remove the screws (x4) and push the SSD card outwards as shown in the picture. 4 4-1 Peripheral Installation Phone module Installation 1. Loosen the screw(x1) to open the cable cover. 2. Slide the phone module into the phone holder and connect the other end of the phone cable to the connector on the system. 4-2 Wall Mount Installation 1. 2. Connect the cables to the system. Fasten the screws.(monitor screwx4) Note: For use only with UL listed wall mount bracket with minimum support weight/load: 5.2kg 5 Specification Model PA79 Motherboard C43 Processor Pineview D525 Core Logic CPU with Graphic built-in + ICH 8M System Memory 2 x DDR3 SO-DIMM slot up to 4GB FSB800Mhz Graphic Memory Intel GMA 3150 share system memory up to 256MB LAN Controller / PHY Intel WG82583V / Intel WG82567V Audio Controller Realtek ALC 662-GR HD codec I/O Controller Winbond W83627UHG Touch TF P-cap 18.5" Camera LED Green-color (GPIO) Microphone Power LED Tri-color (GPIO) Watch Dog Timer Hardware WDT Display Size 18.5" Resolution 1366x768 Brightness 250 nits DC-In 19V Storage HDD 1x SSD Expansion Mini PCI e 2 x PCI-e full size slot Side I/O (Back-Left) Smart IC Card Reader (optional) Rear I/O (Left) LAN (2nd LAN) 1xRJ45 (with 10/100/1000,LED indicator) USB 2 (USB 2.0) Remote 1x SCSI 26pin Reset Button 1, button can be pressed by probe Power Button Rear I/O (Right) Composite Video Line-out Video in, Audio Left, Audio Right 2 (Auto-detect,GPIO), in external IO Model PA79 Motherboard C43 Mic-In 1 (Auto-detect,GPIO), in external IO Vertical I / O LAN 1 x RJ45 (with 10/100/1000) Power DC Jack Display Port USB 2 (USB 2.0) Nurse Call 1 x RJ48 Touch Keys Power Button Channel Adjustment Volume 1xPower button (GPIO) 1xChannel up, 1xChannel down (GPIO) 1xVolume up, 1xVolume down (GPIO) Environment EMC & Safety FCC Class B, CE, LVD / UL60950 / EN60601 Environment Operating Temperature 0°C ~ 35°C (32°F ~ +95°F) Storage Temperature -20°C ~ 60°C (-4°F ~ 140°F) Humidity 20% - 85% RH non condensing Weight Weight 5Kgs Operating System OS Support Windows Embedded POSReady7, Windows 7, Linux Communication & Peripherals Speaker 2x3W Build In Microphone Webcam In the bottom side 5M web cam (USB interface) with webcam door (w/ fly LED cable to MB & control by GPIO) VOIP Phone (Front left) Handset module (optional) Smart IC Card Reader Comply with ISO 7816-1,2,3,T=1 and T=0 protocol Combo Smart IC Card Reader (optional) with separate RFID antenna in the front bezel Comply with ISO 7816-1,2,3,T=1 and T=0 Support MIFARE, MIFARE+ ,Desfire, PC/SC 2.0, HID Light Sensor Yes (GPIO) TV Tuner & DVD Maker Card Mechanical reserved 6 6-1 Jumper Settings C43 motherboard layout 10 6-2 Connectors & Functions Connector Function CN3 USB Port For Web Cam CN4 Speaker & MIC CN5 Cradle CN6 Speaker CN7 Audio Jack (Line out & MIC) CN9 Inverter CN10 Build-In MIC CN12 Nurse Call Button CN14 Membrane CN15 30P All-In-One (Membrane, 2D scanner, RFID, Smart card, Audio Jack) CN17 Nurse Call LED Power CN18 Audio Jack (Line Out) CN19/JP5 System Indicator CN20 IrDA CN21 LVDS CN22 Power LED CN23 PS/2 Keyboard CN24 MSR CN25 COM1 CN26 System FAN CN27 MIC for AEC CN28 Power Button CN29/30 SATA Power CN31 HDD LED CN32/35 Internal USB CN33 USB Port For DVD Dong CN34 LAN2 LED CN36 Battery CN37 USB Port For RFID CN38 2D Scanner CN39 USB Port For Smart Card CN40 LAN1 LED DP3 DVI PWR3 +19V DC Jack RJ11_3 Handset RJ45_3 LAN2 RJ45_4 LAN1 11 Connector Function RJ48_3 Nurse Call SATA1/2 SATA SCSI_3 Remote Control USB3 USB3 USB4 USB1, USB2 of HUB USB5 USB1, USB2 JP3 Touch JP4 Inverter Selection JP6 LCD ID Setting JP7 MCU Power Button JP8 Power Mode Setting JP9 MCU Mode Setting JP10 System Reset JP11 CMOS Operation Mode 12 6-3 Jumper Setting Inverter Selection Function JP4 (1-2) (3-4) (5-6) CCFL ▲LED System Indicator JP5 Function (1-2) (3-4) (5-6) (7-8) ▲Disable Enable MCU Power Button Function JP7 (1-2) Disable ▲Enable Power Mode Setting Function JP8 (1-2) ▲ATX Power AT Power 13 MCU Mode Setting Function JP9 (1-2) ▲Normal ISP Debug System Reset Function JP10 (1-2) ▲System Normal System Reset CMOS Operation Mode Function JP11 (1-2) ▲CMOS Normal CMOS Reset ▲ = Manufacturer Default Setting Note: OPEN SHORT 14 7 Drivers Installation The shipping package includes a Driver CD. You can find every individual driver and utility that enables you to install the drivers in the Driver CD. Please insert the Driver CD into the drive and double click on the “index.htm” to pick up the models. You can refer to the drivers installation guide for each driver in the “Driver/Manual List”. 15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : tiffanyhsu Create Date : 2012:11:06 16:54:19+08:00 Modify Date : 2012:11:06 16:54:19+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Microsoft Word - PA79_C43 user manual v1.0.doc Creator : tiffanyhsu Producer : Acrobat Distiller 9.5.2 (Windows) Document ID : uuid:71a9bc23-d417-46e1-befd-aafa2c5848f7 Instance ID : uuid:081c1f50-3e55-4cf8-9b97-7d9d31a8ac2e Page Count : 22EXIF Metadata provided by EXIF.tools