Farsun Photoelectric Science Technologies FG2800 Wireless Barcode Scanner User Manual FG2600
Farsun Photoelectric Science Technologies co., LTD Wireless Barcode Scanner FG2600
User manual
Barcode scanner UserÂśs Manual Contents Programming with Parameter .............................................................. 4 Interface selection ...................................................................................... 6 Scanning Mode Setting ............................................................................... 7 Keyboard wedge ......................................................................................... 9 USB interface ............................................................................................ 11 RS-232 Interface ....................................................................................... 12 Global Settings .......................................................................................... 16 Indication .................................................................................................. 21 EAN-13 and ISBN/ISSN.............................................................................. 22 EAN-8 ........................................................................................................ 24 UPC-A........................................................................................................ 23 UPC-E ........................................................................................................ 28 Code128 C................................................................................................. 28 Code 39 ..................................................................................................... 29 Code 93 ..................................................................................................... 32 Interleaved 2 of 5 ..................................................................................... 34 Industrial 2 of 5......................................................................................... 38 Matrix 2 of 5 ............................................................................................. 40 Codabar .................................................................................................... 37 Code 11 ..................................................................................................... 38 MSI/Plessey .............................................................................................. 44 UK/Plessey ................................................................................................ 46 GS1 DataBar (GS1 DataBar Truncated)..................................................... 44 GS1 DataBar Limited................................................................................. 45 GS1 DataBar Expanded ............................................................................. 50 Advanced Bar Code Data Formatting ....................................................... 51 Prefix................................................................................................... 51 Suffix ................................................................................................... 52 Preamble ............................................................................................ 52 Postamble ........................................................................................... 53 Code ID ............................................................................................... 48 Code ID position ................................................................................. 48 Code name transmission .................................................................... 49 Code length transmission ................................................................... 49 Case conversion: ................................................................................. 49 Insert String G1 Setting....................................................................... 50 Insert String G2 Setting....................................................................... 50 Insert String G3 Setting....................................................................... 50 Insert String G4 Setting....................................................................... 51 FN1 substitution string setting ........................................................... 51 Truncate leading G5 String setting ..................................................... 57 Truncate ending G6 string setting ...................................................... 57 Replace String Setting ......................................................................... 58 Appendix 1 ASCII Table 1-2....................................................................... 53 Appendix 2 Parameter bar code ............................................................... 55 **Wireless Communication SettingÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ.56 Wireless ChannelÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ.ÍÍÍ..57 RF operÄĆĹŜŞŽÄÄÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ..ÍÍÍÍÍÍÍÍÍ58 Battery StatusÍÍÍÍÍÍÍÍÍÍÍÍ.ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ.. 59 Notice: 1. Please carefully read the User Manual before using the barcode scanner. 2. All software, including firmware, furnished to the user is on a licensed basis. 3. The right is reserved to make changes to any software or product to improve reliability, function, or design. 4. The material in this manual is subject to change without notice. 5.w en p ee r do n,th ew irelesfu nc tio nw ilau to matic alys ends nal ig eac h1 ec nd .Fo ry rh ealth ,tu rn it o fisrec mmend edw en no tu e. Programming with Parameter It is need to scan more than one setting barcode to program the scanner with parameter. Program Parameters The steps of programming are: 1. 6FDQWKH)XQFWLRQ6HWWLQJ%DUFRGH7KH6FDQQHUZLOOLVVXHDEHHS´ sound, and the Red LED is on until the program is finished. 2. Scan the parameters bar code. The parameters may be one or more than one digits. 3. 6FDQWKHVHWWLQJEDUFRGHÂł)LQLVK6HWWLQJ´,ILWLVSURJUDPPHG VXFFHVVIXOWKHVFDQQHUZLOOLVVXHDÂłEHHSEHHS´VRXQGEXWLVVXHD ÂłEHHSEHHSEHHS´VRXQGZKHQIDLOV e.g.ËSet min. code length of Code 128 to 5 chars Ë 1 Ë Ćť Open the manual and turn chapter "code128 ". Scan the setting bar code ÂłScan Min. Code Length´ Scan Min. Code LengthË2 DigitsË00~99Ë1*Ë 2 ËTurn to the last page of this Manual Appendix 10 Parameter bar code, Ćť VFDQWKHSDUDPHWHUEDUFRGH³´DQG ÂłÂ´Ë 3 Ë6FDQÂł)LQLVK6HWWLQJ´ILQLVKWKHVHWWLQJ. Ćť Finish Setting Set Factory Defaults If you wish to return the base unit to the entire factory default settings (radio FRPPXQLFDWLRQVHWWLQJLVQRWLQFOXGHG VFDQWKHEDUFRGH´Set Defaults´ Set Defaults Interface selection This scanner supports interfaces such as keyboard wedge, RS-232 serial wedge, and USB interface. Typically, host is able to identify the host port type automatically. In extreme cases, host port may need setting manually if the host fails to identify it. AutomaticIdentification* USB PS/2KeyBoard RS232 Scanning Mode Setting Good-read off scanning Mode: The trigger button must be pressed once to activate scanning. The light source of scanner stops scanning when there is a successful reading or no code is decoded after the Stand-by duration elapsed. Select Good-read off scanning Mode * Auto-detection scanning Mode: The scanner will start scan Automatically if any object enter the scan area. The laser light of scanner stops scanning when there is a successful reading or no code is decoded after the Stand-by duration elapsed. Once the laser light stops scanning, the present object must be remove away from the scan area to enable Auto-detect sensor. Select Auto-detection scan Press Scanning ModeËIt can continue scan barcode when the button is continuing pressed. Press Scanning Mode Click Scanning Mode: When the button is click, the scanner will keep scanning the barcode until the barcode is reader or the Stand-by duration elapsed. Click Scanning Mode Continuous Scanning mode: the scan engine is always scanning and decoding. The module will read the barcode which gets into the scanning area automatically. Only when the barcode that has been read gets out of the scanning area, the module can read the next barcode. Select Continuous Scanning mode Auto Continue mode: The scanner will start continuous scan Automatically if any object enter the scan area. When there is no bar code is read for half a minute, the scanner shutdown the laser line and exit continuous scanning mode. Auto Continue mode Keyboard wedge Keyboard type IBM ATËPS/2 * OtherËReservedË Keyboard layout USA * Italian French Turkish F Turkish Q 10 USB interface USB device type HID Keyboard* Virtual RS232 PortËreservedË Note: Virtual RS232 Port need driver! IBM Table Top USB IBM Hand-Held USB USB OPOS Hand-Held USB Keyboard layout USA* German French Other 11 RS-232 Interface Baud Rate 2400 4800 9600* 19200 38400 12 57600 Handshaking NoneËScan the bar code below if no Hardware Handshaking is desired NoneËDefaultË Standard RTS/CTSËScan the bar code below to select Standard RTS/CTS Hardware Handshaking. Standard RTS/CTS RTS/CTS Option 1: When RTS/CTS Option 1 is selected, the scanner asserts RTS before transmitting and ignores the state of CTS. The scanner de-asserts RTS when the transmission is complete. RTS/CTS Option 1 RTS/CTS Option 2: When Option 2 is selected, RTS is always high or low (user-programmed logic level). However, the scanner waits for CTS to be asserted before transmitting data. If CTS is not asserted within Host Serial Response Time-out, the scanner issues an error indication and discards the 13 data RTS/CTS Option 2 RTS/CTS Option 3: When Option 3 is selected, the scanner asserts RTS prior to any data transmission, regardless of the state of CTS. The scanner waits up to Host Serial Response Time-out for CTS to be asserted. If CTS is not asserted during this time, the scanner issues an error indication and discards the data. The scanner de-asserts RTS when transmission is complete. RTS/CTS Option 3 ACK/NAK: When this option is selected, after transmitting data, the scanner expects either an ACK or NAK response from the host. When a NAK is received, the scanner transmits the same data again and waits for either an ACK or NAK. After three unsuccessful attempts to send data when NCK are received, the scanner issues an error indication and discards the data. ACK/NCK ENQ: When this option is selected, the scanner waits for an ENQ character from the host before transmitting data. If an ENQ is not received within the Host Serial Response Time-out, the scanner issues an error indication and 14 discards the data. The host must transmit an ENQ character at least every Host Serial Response Time-out to prevent transmission errors. ENQ ACK/NAK with ENQ: This combines the two previous options. For re-transmissions of data, due to a NAK from the host, an additional ENQ is not required. ACK/NCK with ENQ XON/XOFF: An XOFF character turns the scanner transmission off until the scanner receives an XON character. There are two situations for XON/XOFF: Â;2))LVUHFHLYHGEHIRUHWKHVFDQQHUKDVGDWDWRVHQG:KHQWKHVFDQQHU has data to send, it waits up to Host Serial Response Time-out for an XON character before transmission. If the XON is not received within this time, the scanner issues an error indication and discards the data. Â;2))LVUHFHLYHGGXULQJDWUDQVPLVVLRQ'DWDWUDQVPLVVLRQWKHQVWRSVDIWHU sending the current byte. When the scanner receives an XON character, it sends the rest of the data message. The scanner waits up to 30 seconds for the XON XON/XOFF 15 RTS Line State Host: Low RTS ËDefaultË Host: High RTS &RH Host Serial Response Time-out 2 secËDefaultË 5 sec 7.5 sec 10 sec Data Bits 7-Bit 8-Bit*ËDefaultË Stop Bit Select 1 Stop BitËDefaultË 2 Stop Bit 16 Parity None*ËDefaultË Odd Even Select Mark parity and the parity bit is always 1. Mart Select Space parity and the parity bit is always 0. Space Global Settings Element amendment Enable Element amendment * Disable Element amendment 17 Printable character Output only Enable Disable* Decoder optimization Enable Decoder optimization * Disable Decoder optimization Save Power Enable* Disable 18 Standby duration 2 second 5 second * 10 second 20 second Double confirm Disable Double confirm* 5 Times 19 2 Times 10 Times Same barcode delay time If a barcode has been scanned and output once successfully, the laser beam must be off or moved away from the barcode beyond delay time to active VFDQQLQJWKHVDPHEDUFRGH:KHQWKLVIHDWXUHLVVHWWREHÂł[))´WKHQWKH delay time is indefinite. Same barcode delay timeË2 Digits;00~99;00*Ë Global Max./Min. code length Global Max. code lengthË2 Digits;00~99;99*) Global Min. code lengthË2 Digits;00~99;XX*) 20 Global G1-G6 string selection Global Insert String 1(1 DigitsË0~6; 0*) Global Insert String 2(1 DigitsË0~6; 0*) Decode UPC/EAN Only With Supplemental Disable * Enable Indication Volume of beeper High* Middle Low Mute 21 Beep tone High Tone Middle Tone * Low Tone EAN-13 and ISBN/ISSN Enable/Disable EAN-13 Enable EAN-13* Disable EAN-13 EAN-13 Check Digit Verification Enable EAN-13 Check Digit Verification * 22 Disable EAN-13 Check Digit Verification EAN-13 Check Digit Transmission Transmit EAN-13 Check Digit* Do Not Transmit EAN-13 Check Digit EAN13 Supplement Digits 2 Digits 5 Digits 2 Digits or 5 Digits None* 23 ISBN/ISSN Conversion Convert EAN-13 to ISBN/ISSN Do Not Convert EAN-13 to ISBN/ISSN* EAN-8 Enable/Disable EAN-8 Enable EAN-8* Disable EAN-8 EAN-8 Check Digit Verification Enable EAN-8 Check Digit Verification * Disable EAN-8 Check Digit Verification 24 EAN-8 Check Digit Transmission Transmit EAN-8 Check Digit L* Do Not Transmit EAN-8 Check Digit EAN-8 Supplement Digits 2 Digits 5 Digits 2 Digits or 5 Digits None* 25 Expand EAN-8 to EAN-13 Expand to EAN-13 Do Not Convert to EAN-13* EAN-8 &RGH,'VHWWLQJ ÂłG´ Scan Code IDË2 DigitsË00~FFË 64*Ë UPC-A Enable UPC-A 0* Disable UPC-A UPC-A Check Digit Verification Enable UPC-A Check Digit Verification * Disable UPC-A Check Digit Verification UPC-A Check Digit Transmission 26 Transmit UPC-A Check Digit * Do Not Transmit UPC-A Check Digit Supplement Digits 2 Digits 5 Digits 2 Digits or 5 Digits None * UPC-A Truncation/Expansion Expand UPC-A to EAN-13 Truncate leading zeros None* 27 UPC-E Enable/Disable UPC-E Enable UPC-E* Disable UPC-E UPC-E Check Digit Verification Enable UPC-E Check Digit Verification * Disable UPC-E Check Digit Verification UPC-E Check Digit Transmission Transmit UPC-E Check Digit * Do Not Transmit UPC-E Check Digit 28 Supplement Digits 2 Digits 5 Digits 2 Digits or 5 Digits None* UPC-E Truncation/Expansion Truncate leading zeros Expand UPC-E to EAN-13 Expand UPC-E to UPC-A None* 29 Code128 C Enable Code 128* Disable Code 128 Code128 Check Digit Verification Enable Code 128 Check Digit Verification * Disable Code 128 Check Digit Verification Code 128 Check Digit Transmission Transmit Code 128 Check Digit * Do Not Transmit Code 128 Check Digit 30 Code128 Length Scan Max. Code LengthË2 DigitsË00~99Ë99*Ë Scan Min. Code LengthË2 DigitsË00~99Ë1*Ë UCC/EAN 128 Enable/Disable UCC/EAN 128 Enable* Disable UCC/EAN 128 Check Digit Verification Enable* Disable 31 UCC/EAN 128 Check Digit Transmission Transmit Check Digit * Do Not Transmit Check Digit UCC/EAN 128 Length Scan Max. Code LengthË2 DigitsË00~99Ë99*Ë Scan Min. Code LengthË2 DigitsË00~99Ë1*Ë Code 39 Enable/Disable Code 39 Enable* Disable Code 39 Check Digit Verification 32 Enable Disable* Code 39 Check Digit Transmission Transmit Code 39 Check Digit Do Not Transmit Code 39 Check Digit * Code 39 Full ASCII Conversion Enable Code 39 Full ASCII Disable Code 39 Full ASCII * Start/End transmission Enable Code 39 Start/End transmission Disable Enable Code 39 Start/End transmission * 33 Convert Code 39 to Code 32 Enable Convert Code 39 to Code 32 Disable Convert Code 39 to Code 32* &RGH3UHIL[Âł$´WUDQVPLVVLRQ Enable &RGH3UHIL[Âł$´WUDQVPLVVLRQ Disable &RGH3UHIL[Âł$´WUDQVPLVVLRQ* Âł ´DVGDWDFKDUDFWHU Enable 34 Disable* Code39 Length Scan Max. Code LengthË2 DigitsË00~99Ë99*Ë Scan Min. Code LengthË2 DigitsË00~99Ë1*Ë Code 93 Enable/Disable Code 93 Enable* Disable Code 93 Check Digit Verification Enable Code 93 Check Digit Verification * 35 Disable Code 93 Check Digit Verification Code 93 Check Digit Transmission Transmit Check Digit * Do Not Transmit Check Digit Code 93 Full ASCII Conversion Enable Code 93 Full ASCII Disable Code 93 Full ASCII * 36 Code 93 Length Scan Max. Code LengthË2 DigitsË00~99Ë99*Ë Scan Min. Code LengthË2 DigitsË00~99Ë1*Ë Interleaved 2 of 5 Data digits (Variable) Check digit (one bit ,optional) Interleaved 2 of 5 Enable* Disable 37 Interleaved 2 of 5 Check Digit Verification Enable Disable* Interleaved 2 of 5 Check Digit Transmission Transmit Check Digit Do Not Transmit Check Digit * Interleaved 2 of 5 Length Scan Max. Code LengthË2 DigitsË00~99Ë99*Ë Scan Min. Code LengthË2 DigitsË00~99Ë1*Ë Industrial 2 of 5 Enable/Disable Industrial 2 of 5 38 Enable* Industrial 2 of 5 Disable Check Digit Verification Enable Disable * Industrial 2 of 5 Check Digit Transmission Transmit Check Digit Do Not Transmit Check Digit * Industrial 2 of 5 Length Scan Max. Code LengthË2 DigitsË00~99Ë99*Ë Scan Min. Code LengthË2 DigitsË00~99Ë1*Ë 39 Matrix 2 of 5 Enable/Disable Matrix 2 of 5 Enable* Disable Matrix 2 of 5 Check Digit Verification Enable Disable * Matrix 2 of 5 Check Digit transmission Transmit Check Digit Do Not Transmit Check Digit * Matrix 2 of 5 Length Scan Max. Code LengthË2 DigitsË00~99Ë99*Ë Scan Min. Code LengthË2 DigitsË00~99Ë1*Ë 40 Coda bar Enable/Disable Codabar Enable* Disable Coda bar Check Digit Verification Enable Disable* Coda bar Check Digit Transmission Transmit Check Digit Do Not Transmit Check Digit * Coda bar Start/End type ABCD/ABCD * abcd/abcd 41 ABCD/TN*E abcd/tn*e Coda bar Start/End transmission Enable Disable * Coda bar Length Scan Max. Code LengthË2 DigitsË00~99Ë99*Ë Scan Min. Code LengthË2 DigitsË00~99Ë1*Ë 42 Code 11 Enable/Disable Code 11 Enable* Disable Code 11 Check Digit Verification Enable 1bit check Digit * Enable 2 bit check Digit Disable check Digit Code 11 Check Digit Transmission Transmit Code11 Check Digit Do Not Transmit Code11 Check Digit * 43 Code 11 Length Scan Max. Code LengthË2 DigitsË00~99Ë99*Ë Scan Min. Code LengthË2 DigitsË00~99Ë4*Ë MSI/Plessey Enable/Disable MSI/Plessey Enable *0 Disable MSI/Plessey Check Digit Verification 44 Enable 1 digitËMod10Ë Enable 2 digitËMod10/10Ë Enable 2 digitËMod11/10Ë Disable* MSI/Plessey Check Digit Transmission Transmit MSI/Plessey Check Digit Do Not Transmit MSI/Plessey Check Digit * 45 MSI/Plessey Length Scan Max. Code LengthË2 DigitsË00~99Ë99*Ë Scan Min. Code LengthË2 DigitsË00~99Ë4*Ë UK/Plessey Check digit verification: The UK/Plessey has two optional check digits. The check digit 1 and check digit 2 will be calculated as the sum module 10 or 11 of the data digits. Enable UK /Plessey * Disable UK /Plessey 46 UK/Plessey Check Digit Verification Enable* Disable UK /Plessey Check Digit Transmission Transmit Check Digit Do Not Transmit Check Digit * UK/Plessy Lenght Scan Max. Code LengthË2 DigitsË00~99Ë99*Ë Scan Min. Code LengthË2 DigitsË00~99Ë1*Ë GS1 DataBar (GS1 DataBar Truncated) GS1 DataBar Truncated is structured and encoded the same as the standard GS1 DataBar format, except its height is reduced to a 13 modules minimum; while GS1 DataBar should have a height greaterthan or equal to 33 modules. 47 Enable/Disable GS1 DataBar Enable * Disable Conversion Convert GS1 DataBar to UCC/EAN 128 Convert GS1 DataBar to UPC-A or EAN-13 Disable Conversion * GS1 Data Bar Limited Enable/Disable GS1 DataBar Limited 48 Enable* Disable Conversion Convert GS1 DataBar Limited UCC/EAN 128 Convert GS1 DataBar Limited UPC-A OR EAN-13 Disable Conversion* 49 GS1 DataBar Expanded Enable/Disable GS1 DataBar Expanded Enable* Disable Conversion Convert GS1 DataBar to UCC/EAN 128 Disable Conversion* GS1 DataBar Expanded Lenght Scan Max. Code LengthË2 DigitsË00~99Ë99*Ë Scan Min. Code LengthË2 DigitsË00~99Ë1*Ë 50 Advanced Bar Code Data Formatting Format of barcode data transmissionË Prefix Code Preamble name Code Code Code Code ID length data ID Postamble Suffix Quick Setup CR *L0 LF CR & LF None Prefix Transmit Prefix: Do Not Transmit Prefix * Scan PrefixË0~16 CharsË2 Digits /CharË00~FFË 00*Ë 51 Suffix Suffix The default Suffix is CRÇ Transmit Suffix * Do Not Transmit Suffix Scan SuffixË0~22 CharsË2 Digits /CharË00~FFË 00*Ë Preamble Transmit Preamble Do Not Transmit Preamble * 52 Scan preambleË0~16 CharsË2 Digits /CharË00~FFË 00*Ë Postamble Transmit Postamble Do Not Transmit Postamble * Scan PostambleË0~16 CharsË2 Digits /CharË00~FFË 00*Ë Code ID Transmit Proprietary ID Transmit AIM ID Do Not Transmit Code ID* 53 Code ID position Before code data After code data * Code name transmission Transmit Code name Do Not Transmit Code name * Code length transmission Transmit Code length Do Not Transmit Code length * Case conversion: The characters within code data or the whole output string can be set in either upper case or lower case Disable* Upper (data only) 54 Lower (data only) Upper (whole string) Lower (whole string) Insert String G1 Setting Scan Inert String G1Ë0~16 CharsË2 Digits /CharË00~FFË 00*Ë Scan the Position of G1Ë2 DigitsË00~99Ë 00*Ë Insert String G2 Setting Scan Inert String G2Ë0~16 CharsË2 Digits /CharË00~FFË 00*Ë Scan the Position of G2Ë2 DigitsË00~99Ë 00*Ë 55 Insert String G3 Setting G3 is also used as the string to be replaced when the replace function is enabled. Scan Inert String G3Ë0~16 CharsË2 Digits /CharË00~FFË 00*Ë Scan the Position of G3Ë2 DigitsË00~99Ë 00*Ë Insert String G4 Setting G4 is also used as the string to replace G3 in a bar code data when the replace function is enabled. Scan Inert String G4Ë0~16 CharsË2 Digits /CharË00~FFË 00*Ë Scan the Position of G4Ë2 DigitsË00~99Ë 00*Ë FN1 substitution string setting The FN1 character (0x1D) in an UCC/EAN128 barcode, or a Code 128 barcode, or a GS1 DataBar barcode can be substituted with a defined string. 56 Enable FN1 Substitution Disable FN1 Substitution * Scan FN1 substitution string settingË0~4 CharsË2 Digits /CharË00~FFË 00*Ë Truncate leading G5 String setting By setting G5, a defined leading character or string can be truncated. G5 can also be set to be repeated. Scan G5 StringË0~16 CharsË2 Digits /CharË00~FFË 00*Ë Truncate leading G5 string setting (2 DigitsË00~99Ë 01*Ë Truncate ending G6 string setting By setting G6, a defined ending character or string can be truncated. G5 can also be set to be repeated. 57 Scan G6 StringË0~16 CharsË2 Digits /CharË00~FFË 00*Ë Scan Repeat of a G6 String (2 DigitsË00~99Ë 01*Ë Replace String Setting Replace G3 string to G4 string in barcode data. Enable Disable * Appendix 1 ASCII Table Table 1 Function Keys P/S2 keyboard /USB Null Up Down Left RS--232 F1 F2 F3 NUL SOH STX ETX DLE DC1 DC2 DC3 58 4 Right PgUp PgDn Home End Enter Insert F4 F5 F6 F7 F8 F9 F10 Esc F11 F12 Ctrl+ EOOT ENQ ACK BEL BS HT LF VT FF CR SO DC4 NAK SYN ETB CAN EM SUB ESC FS GS RS Delete Alt+ SI US Bs Tab ExampleËÄTabÄ Ä09Ä. Table 2 Chars SP Ä 59 3 Ăž Ë Ë Ë ExampleË$6&,,ÄĘ˝Ä ÄÄ. Appendix 2 Parameter bar code 0 %N0 1 %N1 60 DEL 4 Finish Setting 61 Wireless Communication Setting Unpair the scanner from host Unpair the scanner from host Pair Scanner with Host Pairing is the process by which a scanner initiates communication with a host. The scanner with the Host pairing as follows: 1. Connect the scanner to the Host with the Charging Cable. 3UHVVWKH3DLULQJ%XWWRQ´XQWLOWKH6FDQQHULVVXHGDEHHSEHHSVRXQG NOTE: A host is able to work with as more as 99 scanners at the same time. Clear the Buffer of Scanner Scan the setting bar code below will clear the bar code data save in the scanner buffer. Clear the Buffer of Scanner 62 Wireless Channel When there are more than one host work in the same Space, every host has to work in different channel. Channel is set as follows: 1. Open a Notepad or other text editor. 2. Press the "Channel Settings button" to change the channel of a host, and the channel NO will be displayed in the screen. Scanner ID Set the Scanner IDË2 DigitsË00~99Ë00*Ë Add Scanner ID as Prefix If this item is enabled, the scanner will add its ID as prefix of every barcode. E.g. When scan the bar code ³´LIWKH,'RIWKHVFDQQHULV ³´DQGWKHRXWSXWEDUFRGHGDWDZLOOEH Âł,'´ NOTE: The ID of a scanner can be set manually or assigned by the host DXWRPDWLFDOO\(YHU\VFDQQHUZRUNZLWKWKHVDPH+RVWFDQÂśWEHZLWKWKH same ID. Enable Add Scanner ID as Prefix Disable Add Scanner ID as Prefix * 63 Power off Interval Power Off IntervalË2 DigitsË00~99secondsË15seconds*Ë 4 Shut down the Scanner Immediately RF operating mode: Auto-Store Mode: The scanner starts storing barcode data when it loses its connection to a host (for example, when a user holding the scanner walks out of range). Data transmission is triggered by reestablishing the connection with hsot (for example, when a user holding the scanner walks back into range). Auto-Store Mode* 64 NO-Store Mode: Do not batch data. The scanner attempts to transmit every scanned barcode. If the transmission is failed, the barcode data is ignored and issued a "beep EHHSEHHS´VRXQG NO-Store Mode Manual Transmission Mode : Data transmission is triggered by scanning ÂłStart transfer Bar Code Data´ Manual Transmission Mode Start transfer Bar Code Data (for Manual Transmission Mode) Wireless Communication Inter-character delay 65 Scan Wireless Communication Inter-character delayË2 DigitsË 0.0~9.9secondsË0.5seconds*Ë Battery Status *Scan the barcodeËthe battery status will display on your screen. 66 FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation 67
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2016:05:18 15:25:56+08:00 Modify Date : 2016:05:18 15:25:56+08:00 Metadata Date : 2016:05:18 15:25:45+08:00 Creator Tool : PScript5.dll Version 5.2 Document ID : uuid:B07794BCC91CE611B0889F3FF002464B Instance ID : uuid:69f142bb-f727-48f8-9f3b-6e703e6e522b Derived From Instance ID : uuid:d2f7de41-e1c4-40ac-a106-4043de36d8da Derived From Document ID : uuid:4dc0a761-58a6-4817-a1a5-374af4acd6c7 Format : application/postscript Title : user manual FG2600.pdf Creator : Administrator Page Count : 67 Author : AdministratorEXIF Metadata provided by EXIF.tools