Feig Electronic CPR02 Inductive Tag Reader User Manual Sicherheits und Warnhinweise
Feig Electronic GmbH Inductive Tag Reader Sicherheits und Warnhinweise
Users Manual
MONTAGE INSTALLATION ® OBID classic pro ID CPR.02-A (RS232 Interface) ID CPR.02-B (RS485 Interface) (deutsch / english) preliminary public (B) 2002-09-13 M10701-1de-ID-B.doc ® DEUTSCH Montage deutsche Version ab Seite 3 ENGLISH OBID classic pro english version from page 20 Seite 2 von 36 ID CPR.02-x FEIG ELECTRONIC GmbH ® Montage OBID classic pro ID CPR.02-x Hinweis Copyright 1999 - 2002 by FEIG ELECTRONIC GmbH Lange Straße 4 D-35781 Weilburg-Waldhausen Tel.: +49 6471 3109-0 http://www.feig.de Alle früheren Ausgaben verlieren mit dieser Ausgabe ihre Gültigkeit. Die Angaben in diesem Handbuch können ohne vorherige Ankündigung geändert werden. Weitergabe sowie Vervielfältigung dieses Dokuments, Verwertung und Mitteilung ihres Inhalts sind nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlung verpflichtet zu Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder Gebrauchsmuster-Eintragung vorbehalten. Die Zusammenstellung der Informationen in diesem Dokument erfolgt nach bestem Wissen und Gewissen. FEIG ELECTRONIC GmbH übernimmt keine Gewährleistung für die Richtigkeit und Vollständigkeit der Angaben in diesem Dokument. Insbesondere kann FEIG ELECTRONIC GmbH nicht für Folgeschäden auf Grund fehlerhafter oder unvollständiger Angaben haftbar gemacht werden. Da sich Fehler, trotz aller Bemühungen nie vollständig vermeiden lassen, sind wir für Hinweise jederzeit dankbar. Die in diesem Dokument gemachten Installationsempfehlungen gehen von günstigsten Rahmenbedingungen aus. FEIG ELECTRONIC GmbH übernimmt keine Gewähr für die einwandfreie Funktion in systemfremden Umgebungen. FEIG ELECTRONIC GmbH übernimmt keine Gewährleistung dafür, dass die in diesem Dokument enthaltenden Informationen frei von fremden Schutzrechten sind. FEIG ELECTRONIC GmbH erteilt mit diesem Dokument keine Lizenzen auf eigene oder fremde Patente oder andere Schutzrechte. ® OBID ist ein eingetragenes Warenzeichen der FEIG ELECTRONIC GmbH Allgemeine Hinweise zu diesem Dokument Das Zeichen „!“ weist auf Erweiterungen bzw. Änderungen gegenüber der Vorgängerversion hin. FEIG ELECTRONIC GmbH Seite 3 von 36 ® DEUTSCH OBID classic pro Montage ID CPR.02-x Inhalt 1. Sicherheits- und Warnhinweise 2. Montage 3. 4. 2.1 Montage auf Unterputzdose....................................................................................... 7 2.2 Montage mit Aufputzrahmen ID APR-A..................................................................... 8 Leseranschluss 3.1 Jumper und Schalter ................................................................................................ 10 3.2 Spannungsversorgung............................................................................................. 11 3.3 Relais......................................................................................................................... 11 3.4 Digitale Eingänge ..................................................................................................... 11 3.5 RS232-Schnittstelle (ID CPR.02-A) .......................................................................... 11 3.6 RS485-Schnittstelle (ID CPR.02-B) .......................................................................... 12 3.7 Daten-/Taktschnittstelle ........................................................................................... 13 Inbetriebnahme 4.1 5. 6. 14 Adresseinstellung (Busbetrieb mit RS485-Schnittstelle) ...................................... 14 Technische Daten 15 5.1 Zulassung ................................................................................................................. 16 5.2 Abmessungen Unterputzmontage........................................................................... 17 5.3 Abmessungen mit ID APR-A bei Aufputzmontage ................................................. 18 Lieferumfang: 6.1 19 Optionales Zubehör.................................................................................................. 19 Seite 4 von 36 FEIG ELECTRONIC GmbH ® OBID classic pro Montage ID CPR.02-x 1. Sicherheits- und Warnhinweise • Das Gerät darf nur für den vom Hersteller vorgesehenen Zweck verwendet werden. • Die Bedienungsanleitung ist zugriffsfähig aufzubewahren und jedem Benutzer auszuhändigen. • Unzulässige Veränderungen und die Verwendung von Ersatzteilen und Zusatzeinrichtungen, die nicht vom Hersteller des Gerätes verkauft oder empfohlen werden, können Brände, elektrische Schläge und Verletzungen verursachen. Solche Maßnahmen führen daher zu einem Ausschluss der Haftung und der Hersteller übernimmt keine Gewährleistung. • Für das Gerät gelten die Gewährleistungsbestimmungen des Herstellers in der zum Zeitpunkt des Kaufs gültigen Fassung. Für eine ungeeignete, falsche manuelle oder automatische Einstellung von Parametern für ein Gerät bzw. ungeeignete Verwendung eines Gerätes wird keine Haftung übernommen. • Reparaturen dürfen nur vom Hersteller durchgeführt werden. • Anschluss-, Inbetriebnahme-, Wartungs-, und sonstige Arbeiten am Gerät dürfen nur von Elektrofachkräften mit einschlägiger Ausbildung erfolgen. • Vor dem Öffnen des Gerätes ist stets die Versorgungsspannung abzuschalten und durch Nachmessen sicherzustellen, daß das Gerät spannungslos ist. Das Verlöschen einer Betriebsanzeige ist kein Indikator dafür, daß das Gerät vom Netz getrennt und spannungslos ist. • Alle Arbeiten am Gerät und dessen Aufstellung müssen in Übereinstimmung mit den nationalen elektrischen Bestimmungen und den örtlichen Vorschriften durchgeführt werden. • Beim Arbeiten an dem Gerät müssen die jeweils gültigen Sicherheitsvorschriften beachtet werden. • Bei gewaltsamer Entfernung des Lesers kann die Steuerleitung (sofern das Relais benutzt wird) für die Tür/Torsteuerung kurzgeschlossen werden. Hierdurch ist ein unbefugtes Öffnen der/des Tür/Tores möglich. FEIG ELECTRONIC GmbH Seite 5 von 36 ® DEUTSCH OBID classic pro Montage ID CPR.02-x 2. Montage Der Leser ist für die Wandmontage auf 60 mm Unterputzdosen vorgesehen. Für die Aufputzmontage kann das Gehäuseunterteil durch den Aufputzrahmen ID APR-A, der als Zubehör lieferbar ist, ersetzt werden. HINWEISE: • Der Leser sollte nicht direkt auf leitende Materialien wie Metallflächen, Metallgitter (Armierung) oder metallisierte Oberflächen montiert werden, da diese Flächen eine Reduzierung der Lesereichweite bewirken. Der Abstand zu derartigen Flächen sollte mindestens 3 cm betragen. • Ist eine Montage auf einer Metalloberfläche notwendig, kann zur Einhaltung des Mindestabstandes der Aufputzrahmen ID APR-A eingesetzt werden. • Der räumliche Abstand zu benachbarten Lesern gleicher Bauart sollte 30 cm nicht unterschreiten. • Vor der endgültigen Installation sollte der geplante Installationsort auf seine Tauglichkeit geprüft werden. • Die Gehäuseöffnung (A), (siehe Abbildung 1: Montageausrichtung) muß nach unten montiert werden! Abbildung 1: Montageausrichtung (A) nach unten Seite 6 von 36 FEIG ELECTRONIC GmbH ® OBID classic pro Montage ID CPR.02-x 2.1 Montage auf Unterputzdose 1. Montageort auswählen: Die Montage sollte auf einem möglichst ebenen Untergrund erfolgen. 2. Anschluss: siehe Kapitel Leseranschluss. 3. Inbetriebnahme: • Anschlussplatine in das Gehäuseunterteil einrasten (siehe: Abbildung 2). • Gehäuseoberteil auf Gehäuseunterteil stecken. Dabei die Stiftleiste der Leserelektronik sauber in Buchsenleiste X3 einführen! • siehe Kapitel Inbetriebnahme 4. Wandmontage: Erst nach Kontrolle der Inbetriebnahmearbeiten sollte die Wandmontage erfolgen. • Gehäuseoberteil von –Unterteil abziehen. • Gehäuseunterteil mit eingerasteter Anschlussplatine auf Untergrund verschrauben. • Gehäuseoberteil auf Gehäuseunterteil stecken. Dabei die Stiftleiste der Leserelektronik sauber in Buchsenleiste X3 einführen! • Gehäuseoberteil mit Schneidschraube 3,2 x 25 mm auf Gehäuseunterteil verschrauben. • Frontaufkleber auf das saubere und fettfreie Gehäuse aufkleben. X3 (1) Abbildung 2: Rückansicht mit eingerasteter Anschlussplatine (1) FEIG ELECTRONIC GmbH Seite 7 von 36 ® Montage DEUTSCH OBID classic pro ID CPR.02-x 2.2 Montage mit Aufputzrahmen ID APR-A 1. Wandmontage: • Die Montage sollte auf einem möglichst ebenen Untergrund erfolgen. • Durchbrüche für Zuleitung im Gehäuseunterteil herstellen, ggf. Würgenippel einsetzen und Zuleitung einziehen. • Gehäuseunterteil mit Untergrund verschrauben. 2. Anschluss: siehe Kapitel Leseranschluss. 3. Gehäuse schließen: • Anschlussplatine (1) gem. Abbildung 3, mit den Anschlussklemmen nach unten in das Gehäuseunterteil einrasten. Dazu die Rasthaken mit den Fingern leicht auseinanderdrücken. • Gehäuseoberteil auf Gehäuseunterteil stecken. Dabei die Stiftleiste der Leserelektronik sauber in Buchsenleiste X3 einführen! • Gehäuseoberteil mit Schneidschraube 3,2 x 25 mm mit Gehäuseunterteil verschrauben. 4. Inbetriebnahme: siehe Kapitel Inbetriebnahme 5. Frontaufkleber aufkleben: Frontaufkleber auf das saubere und fettfreie Gehäuse aufkleben. +/~ -/~ R COM NO GND R/A T/B CLK DAT IN1 IN2 (1) Abbildung 3: Aufputzmontage (LED oben links) Offenes Aufputzgehäuses mit eingesetzter Anschlussplatine (1) Seite 8 von 36 FEIG ELECTRONIC GmbH ® Montage OBID classic pro ID CPR.02-x 3. Leseranschluss Der Anschluss des Lesers erfolgt über die Anschlussplatine (siehe: Abbildung 4), die im Gehäuseunterteil eingerastet wird. CLK DAT IN1 IN2 X1 X3 X2 +/~ -/~ CLS COM NO GND R/A T/B Abbildung 4: Anschlussplatine Klemme Leiste X2 X1 Funktion Bezeichnung +/~ -/~ CLS COM NO GND R/A T/B CLK DAT IN1 IN2 FEIG ELECTRONIC GmbH ID CPR.02-A ID CPR.02-B Spannungsversorgung 12 - 24 AC / DC Daten-/Taktschnittstelle – CLS Relais interner GND RS232 - RxD RS485 - A RS232 - TxD RS485 - B Daten-/Taktschnittstelle – Takt Daten-/Taktschnittstelle – Daten Digitaler Eingang 1 Digitaler Eingang 2 Seite 9 von 36 ® Montage DEUTSCH OBID classic pro ID CPR.02-x 3.1 Jumper und Schalter Abbildung 5 zeigt die Lage der Jumper und Schalter auf der Leiterplatte des ID CPR.02-x. Die Jumper und Schalter sind nur bei demontiertem Gerät zugänglich. X7 J1 J2 12345678 S1 ON OFF X1 X4 X3 X2 3 2 1 Abbildung 5: Jumper und Schalter S1: DIP-Schalter zur Einstellung der Leseradresse. X1: Stiftleiste zum Aufstecken der Anschlussplatine. X2 / X3 / X4: Jumper für Abschlusswiderstände der RS485-Schnittstelle (nur ID CPR.02-B). X7: Programmierschnittstelle für Firmwareupdate. J1 / J2: Jumper für Firmwareupdate. Seite 10 von 36 FEIG ELECTRONIC GmbH ® Montage OBID classic pro ID CPR.02-x 3.2 Spannungsversorgung Die Spannungsversorgung erfolgt über die Klemmen [+ / ~] und [- / ~]. Das Gerät kann wahlweise mit 12 - 24 V AC oder DC versorgt werden. Die Polarität bei DC Spannungsversorgung kann frei gewählt werden. HINWEIS: Die Zuleitung sollte nicht direkt parallel mit anderen Energieversorgungs- und Niederspannungsleitungen verlegt werden. 3.3 Relais Der Leser verfügt über ein Relais mit einem Schließerkontakt. Der Anschluss erfolgt über die Klemmen [NO] und [COM]. 3.4 Digitale Eingänge Die beiden digitalen Eingänge [IN1] bzw. [IN2] dürfen nur gegen intern GND, Klemme [GND] geschaltet werden (siehe Abbildung 6). Eine Beschaltung mit Fremdspannung kann zur Zerstörung des Gerätes führen! IN1 IN2 GND Abbildung 6: Anschluss der digitalen Eingänge 3.5 RS232-Schnittstelle (ID CPR.02-A) Leser mit RS232-Schnittstelle werden gem. Abbildung 7 mit dem Leitrechner verbunden. Host RxD TxD GND R/A T/B GND ID CPR.02-A Abbildung 7: Anschluss der RS232-Schnittstelle FEIG ELECTRONIC GmbH Seite 11 von 36 ® Montage DEUTSCH OBID classic pro ID CPR.02-x 3.6 RS485-Schnittstelle (ID CPR.02-B) Bei einem RS485-Datenbus kann es notwendig werden Abschlusswiderstände einzusetzen. Die Notwendigkeit zum Einsatz von Abschlusswiderständen ist für jede Installation im Einzelfall zu prüfen, da dies z. B. von Leitungslängen, Busaufbau, Spannungsversorgung der Leser und dem verwendeten Leitrechner abhängig ist. Der Abschlusswiderstand ist i.d.R. nur am Busende, also am letzten Gerät, notwendig. Dazu ist an der Jumper an X2 Pin 1 und 2 zu stecken, Jumper in Stellung 1 – 2 (siehe Abbildung 8 und Abbildung 5). Der Busbetrieb setzt einen Leitrechner mit Abschlusswiderstand und aktiver Terminierung voraus. Als Leitung wird eine paarweise verseilte oder verdrillte Leitung empfohlen. Host ID CPR.02-B ID CPR.02-B ID CPR.02-B (mit aktiver Terminierung) X2 T/B X2 X2 R/A R/A T/B T/B R/A ohne Abschlusswiderstand mit Abschlusswiderstand Abbildung 8: Busbetrieb mit RS485-Schnittstelle Steht kein Leitrechner mit aktiver Terminierung zur Verfügung, kann ersatzweise an maximal einem Leser eine aktive Terminierung vorgenommen werden. Dazu stehen die Jumper X3 und X4 zur Verfügung. X4 X4 X4 X3 X3 X3 X2 X2 X2 3 2 1 ohne Terminierung (Werkseinstellung) 3 2 1 3 2 1 Abschlusswiderstand aktive Terminierung u. Abschlusswiderstand Abbildung 9: Jumperstellungen RS485-Schnittstelle X4 +5V 1 kΩ T/B X2 100Ω R/A 1 kΩ X3 GND Abbildung 10: interne Beschaltung der RS485-Schnittstelle Seite 12 von 36 FEIG ELECTRONIC GmbH ® Montage OBID classic pro ID CPR.02-x 3.7 Daten-/Taktschnittstelle Der Anschluss der Daten-/Taktschnittstelle erfolgt gem. Abbildung 11. Falls am Host kein CLS Anschluss vorgesehen oder notwendig ist, kann auf diese Leitung verzichtet werden. Host CLOCK DATA CLS GND CLK DAT CLS GND ID CPR.02-A Abbildung 11: Anschluss der Daten-/Taktschnittstelle FEIG ELECTRONIC GmbH Seite 13 von 36 ® Montage DEUTSCH OBID classic pro ID CPR.02-x 4. Inbetriebnahme 4.1 Adresseinstellung (Busbetrieb mit RS485-Schnittstelle) An Lesern mit RS232-Schnittstelle ist i.d.R. keine Adresseinstellung notwendig. Bei Geräten mit RS485-Schnittstelle kann die Geräteadresse entweder über den DIP-Schalter am geöffneten Gerät (siehe Abbildung 5), oder über den Leitrechner (Host) erfolgen. Busbetrieb mit bis zu 16 Lesern: Die Einstellung der Geräteadresse erfolgt mittels der DIP-Schalter S1, DIP1 - DIP4, gemäß Tabelle (DIP5 - DIP8 haben keine Funktion). Dabei wird jeder Leser mit einer individuellen Adresse versehen. Adresse 10 11 12 13 14 15 DIP 1 OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON DIP 2 OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON DIP 3 OFF OFF OFF OFF ON ON ON ON OFF OFF OFF OFF ON ON ON ON DIP 4 OFF OFF OFF OFF OFF OFF OFF OFF ON ON ON ON ON ON ON ON Busbetrieb mit 16 - 32 Lesern: Die Adresseinstellung erfolgt per Software über den Leitrechner (Host). HINWEIS: Da alle Leser werksseitig die Adresse 0 eingestellt haben, müssen sie nacheinander angeschlossen und konfiguriert werden. Seite 14 von 36 FEIG ELECTRONIC GmbH ® Montage OBID classic pro ID CPR.02-x 5. Technische Daten Gehäuse Kunststoff ASA Farbe Gehäuseunterteil: Gehäuseoberteil: ähnlich RAL 9002 (grauweiß) ähnlich RAL 7043 (verkehrgrau) Gewicht ca. 120 g Schutzart IP 54 Spannungsversorgung 12 - 24 V AC/DC Leistungsaufnahme max. 2,6 W Temperaturbereich -25°C bis 60°C relative Luftfeuchte 95 % (nicht betauend) Antenne integriert Trägerfrequenz 13,56 MHz unterstützte Transpondertypen • • • • Signalgeber 1 x Bicolor-LED (rot, grün, orange) 1 x Summer Relais 1 x Schließer Kontaktbelastbarkeit: 24 V AC/DC 1,5 A digitale Eingänge 2 x konfigurierbar Leitungslänge max. 3 m nach ISO14443-A nach ISO14443-B nach ISO15693 I-CODE1 Schnittstellen: asynchron (bidirektional) 4800 bis 38400 Baud • RS232 (ID CPR.02-A) Leitungslänge max. 10 m • RS485 (ID CPR.02-B) max. 32 Geräte pro Datenbus Daten-/Takt (unidirektional) TTL Leitungslänge max. 3 m • Magnetkarten-Emulation, Spur 1 (7 Bit) u. Spur 2+3 (5 Bit) • Wiegand-Emulation DIP-Schalter 8-polig EEPROM 10.000 Schreibzyklen Werkskonfiguration: asynchrone Schnittstelle: IN1 IN2 LED-Betriebsanzeige FEIG ELECTRONIC GmbH 9600 Baud, 8 Daten- 1 Stoppbit, even Parity aktiviert LED rot und das Relais aktiviert LED grün und den Summer orange Seite 15 von 36 ® DEUTSCH OBID classic pro Montage ID CPR.02-x 5.1 Zulassung Die Funkanlage entspricht, bei bestimmungsgemäßer Verwendung den grundlegenden Anforderungen des Artikels 3 und den übrigen einschlägigen Bestimmungen der R&TTE Richtlinie 1999/5/E6 vom März 99. Seite 16 von 36 FEIG ELECTRONIC GmbH ® Montage OBID classic pro ID CPR.02-x 5.2 Abmessungen Unterputzmontage Abbildung 12: Abmessungen Unterputzgehäuse (A) = Unten FEIG ELECTRONIC GmbH Seite 17 von 36 ® DEUTSCH OBID classic pro Montage ID CPR.02-x 5.3 Abmessungen mit ID APR-A bei Aufputzmontage Abbildung 13: Abmessungen bei Montage mit Aufputzrahmen ID APR-A (A) = Unten Seite 18 von 36 FEIG ELECTRONIC GmbH ® Montage OBID classic pro ID CPR.02-x 6. Lieferumfang: 1 x Gehäuseunterteil (Unterputzgehäuse) 1 x Gehäuseoberteil mit Leserelektronik 1 x Anschlussplatine 1 x Frontaufkleber 1 x Schneidschraube 3,2 x 25 mm (zur Verbindung der Gehäuseteile) 2 x Schneidschrauben 3,2 x 15 mm (zur Wandmontage) 1 x Montageanleitung 6.1 Optionales Zubehör Gehäuseunterteil für Aufputzmontage ID APR-A Bestell-Nr.: 1144.001.00 Frontaufkleber ID AKL.02 Frontaufkleber Bestell-Nr.: 1424.000.00 FEIG ELECTRONIC GmbH Seite 19 von 36 ® OBID classic pro Installation ID CPR.02-x Note Copyright 1999 - 2002 by FEIG ELECTRONIC GmbH Lange Strasse 4 D-35781 Weilburg-Waldhausen Tel.: +49 6471 3109-0 http://www.feig.de With the edition of this document, all previous editions become void. Indications made in this manual may be changed without previous notice. Copying of this document, and giving it to others and the use or communication of the contents thereof are forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design. Composition of the information in this document has been done to the best of our knowledge. FEIG ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. The instructions given in this manual are based on advantageous boundary conditions. FEIG ELECTRONIC GmbH does not give any guarantee promise for perfect function in cross environments. FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this document and makes no representation that they free of patent infringement. FEIG ELECTRONIC GmbH does not convey any license under its patent rights nor the rights of others. OBID® is registered trademark of FEIG ELECTRONIC GmbH. General information's regarding this document The sign "!" indicates extensions or changes of this manual compared with the former issue. Page 20 of 36 FEIG ELECTRONIC GmbH ® OBID classic pro Installation ID CPR.02-x Content 1. Safety instructions – please read carefully prior to initiation 22 2. Installation 23 3. 4. 2.1 Installation on flush-mounting box ......................................................................... 24 2.2 Installation with surface frame ID APR-A................................................................ 25 Reader-connection 3.1 Jumper and Switches............................................................................................... 27 3.2 Power supply ............................................................................................................ 28 3.3 Relay.......................................................................................................................... 28 3.4 Digital inputs (IN1 / IN2) ........................................................................................... 28 3.5 RS232 Interface (ID CPR.02-A)................................................................................. 28 3.6 RS485 Interface (ID CPR.02-B)................................................................................. 29 3.7 Data-/Clock interface ................................................................................................ 30 Operation 4.1 5. 6. 26 31 Address setting (Bus mode with RS485 interface) ................................................ 31 Technical data 32 5.1 Approval .................................................................................................................... 33 5.2 Dimensions for concealed installation ................................................................... 34 5.3 Dimensions for surface installation with ID APR-A ............................................... 35 System delivery contents: 6.1 36 Optional Accessories ............................................................................................... 36 FEIG ELECTRONIC GmbH Page 21 of 36 ® OBID classic pro Installation ID CPR.02-x 1. Safety instructions – please read carefully prior to initiation • The device has to be used only for the purpose designed by the manufacturer. • The operation manual has to be stored available at any time and has to be handed over to each user. • Unauthorized changes and the use of spare parts and additional devices which have not been sold or recommended by the manufacturer may cause fire, electric shocks or injuries. Such measures will lead to exclusion of any liability by the manufacturer. • The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid for the device. The manufacturer is not legally responsible for incorrect, unsuitable manual or automatical setting of parameters for a device or the incorrect application of a device. • Repairs can only be executed by the manufacturer. • Installation-, operation- and maintenance procedures should only be carried out by qualified personnel. • Before opening the device, the power supply must always be interrupted. Make sure that the device is without voltage by measuring. CAUTION! The fading of an operation control (LED) is no indicator for an interrupted power supply or the device being without voltage! • Works at the device and its installation have to be executed according to the national legal requirements and local prescriptions. • When working on devices the valid safety regulations must be observed. • Caution: Any modification to the equpment not expressively authorized by the party responsible for compliance could void the users authority to operate the equipment. Page 22 of 36 FEIG ELECTRONIC GmbH ® OBID classic pro Installation ID CPR.02-x 2. Installation The Reader has been designed for wall installation on 60 mm flush-mounting box. For surface installation, the bottom part of the casing can be substituted by the surface frame ID APR-A, which is available as an attachment. NOTES: • The Reader must not be installed directly upon conductive materials as e.g. metal sur- faces, metal grids (reinforcements) or metallized surfaces, as these surfaces reduce the detection range of the Reader. The distance between the Reader and such surfaces should be min. 3 cm. If an installation to a metal surface becomes necessary, the surface frame ID APR-A can be employed in order to keep the minimal distance. • The distance between two Readers of the same type should not fall below 30 cm. • Before any installation the intended position of the Reader should be tested for its suit- ability. • The opening (A) in the casing (see Fig 1) has to be installed downwards! Fig 1: mounting direction (A) downwards FEIG ELECTRONIC GmbH Page 23 of 36 ® Installation OBID classic pro ID CPR.02-x 2.1 Installation on flush-mounting box 1. Select installation place: The installation should be executed always on a surface as even as possible. 2. Connection: see chapter Reader-connection 3. Operation: • snap connection board into bottom part of casing (see Fig 2). • Put the top of the casing onto its bottom part. The pin board of the Reader electronic has to be inserted carefully into the socket board X3! • see chapter Installation 4. Wall installation: The wall installation should be executed only after a control of all functions. • Remove top of the casing from its bottom part. • Screw bottom part of casing with snapped-in connection board to selected surface. • Put top of the casing again onto its bottom part. Insert the pin board of the Reader electronic carefully in the socket board X3! • Screw top of casing to bottom part by using thread cutting screw 3,2 x 25 mm. • Attach adhesive label to clean and non-greasy casing. X3 (1) Fig 2: Rear view with snapped-in connection board (1) Page 24 of 36 FEIG ELECTRONIC GmbH ® Installation OBID classic pro ID CPR.02-x 2.2 Installation with surface frame ID APR-A 1. Wall installation: • The installation should be executed always on a surface as even as possible. • Make openings into the bottom part of the casing for lead-in wire, eventually attach twisting sleeve and pull wire into the casing. • Screw bottom part of casing to surface. 2. Connection: see chapter Reader-connection 3. Close casing: • Snap-in connection board (1) to bottom part of casing according to Fig 3 with the connectors in downward direction. In order to do this, press the notches slightly apart with your fingers. • Put top of the casing onto its bottom part. Insert the pin board of the Reader electronic carefully into the socket board X3!! • Screw top of casing to bottom part by using thread cutting screw 3,2 x 25 mm. 4. Operation: see chapter Reader-connection 5. Adhesive label: Attach label to clean and non-greasy casing +/~ -/~ R COM NO GND R/A T/B CLK DAT IN1 IN2 (1) Fig 3: Surface installation (LED top left) Open surface casing with snapped-in connection board (1) FEIG ELECTRONIC GmbH Page 25 of 36 ® Installation OBID classic pro ID CPR.02-x 3. Reader-connection The connection of the Reader is executed via the connection board. (see: Fig 4) which is snapped into the bottom part of the casing. CLK DAT IN1 IN2 X1 X3 X2 +/~ -/~ CLS COM NO GND R/A T/B Fig 4: Connection board connector board name +/~ -/~ X2 X1 CLS COM NO GND function ID CPR.02-A ID CPR.02-B power supply 12 - 24 AC / DC data-/clock interface – cls relay internal GND R/A RS232 - RxD T/B CLK RS232 - TxD RS485 - B data-/clock interface – clock data-/clock interface – data DAT IN1 IN2 RS485 - A digital input 1 (IN1) digital input 2 (IN1) Table 1: connection plan Page 26 of 36 FEIG ELECTRONIC GmbH ® Installation OBID classic pro ID CPR.02-x 3.1 Jumper and Switches Fig 5 shows the position of the jumpers and switches on the printed circuit board of the ID CPR.02-x. The jumpers and switches are only accessible at the opened device. X7 J1 J2 12345678 ON OFF S1 X1 X4 X3 X2 3 2 1 Fig 5: Jumper and Switches S1: DIP-switch to configure the Reader address. X1: Terminal for sticking up the connection board. X2 / X3 / X4: Jumper for termination resistors of the RS485 interface (only ID CPR.02-B). X7: Interface for firmware update. J1 / J2: Jumper for firmware update. FEIG ELECTRONIC GmbH Page 27 of 36 ® Installation OBID classic pro ID CPR.02-x 3.2 Power supply The power supply is effected via the connectors [+ / ~] and [- / ~]. The device may be supplied either with 12 - 24 V AC or DC. In case of DC supply, the polarity may be chosen freely. NOTE: The lead-in wire should not be laid directly parallel to other power supply- and low voltage wires. 3.3 Relay The device is equipped with an relay (normally open contact). The connection is executed via the connectors [NO] and [COM]. 3.4 Digital inputs (IN1 / IN2) The digital inputs [IN1] and [IN2] can only be connected to "intern GND" (see Fig 6). Any connection to external voltage might damage the unit! IN1 IN2 GND Fig 6: connection of the digital inputs 3.5 RS232 Interface (ID CPR.02-A) Readers with RS232 interface have to be connected to the host according to Fig 7. Host RxD TxD GND R/A T/B GND ID CPR.02-A Fig 7: connection of the RS232 Interface Page 28 of 36 FEIG ELECTRONIC GmbH ® Installation OBID classic pro ID CPR.02-x 3.6 RS485 Interface (ID CPR.02-B) With RS485 data buses, it can be necessary to use terminating resistors. For each installation, checks should be made as to whether it is necessary to use terminating resistors, because this e.g. is dependent on line lengths, bus structure, powering of the Readers and the employed host computer. Generally, a terminating resistor is only required at the end of the bus, i.e. on the last unit. In order to do this, a bridge needs to be set up between terminals 1 and 2 of terminal X2 (see Fig 8 and Fig 5). To operate the bus, you need a host computer with a terminating resistor and active termination. A twisted paired or stranded wire is recommended. Host ID CPR.02-B ID CPR.02-A ID CPR.02-A (with active termination) X2 T/B X2 X2 R/A R/A T/B T/B R/A without termination with termination resistor Fig 8: data bus with RS485 interface If no host computer with active termination is available, a active termination can be implemented as an alternative at maximum one Reader. The Jumpers X3 and X4 are available to this. X4 X4 X4 X3 X3 X3 X2 3 2 1 X2 X2 3 2 1 without termination (default) 3 2 1 with termination resistor active termination and termination resistor Fig 9: Jumper positions of the RS485 interface X4 +5V 1 kΩ T/B X2 100Ω R/A 1 kΩ X3 GND Fig 10: intern construction of the RS485 interface FEIG ELECTRONIC GmbH Page 29 of 36 ® Installation OBID classic pro ID CPR.02-x 3.7 Data-/Clock interface The connection of the data-/clock interface is executed according to Fig 11. If no CLS signal is required on host, this connection can be abandon. Host CLOCK DATA CLS GND CLK DAT CLS GND ID CPR.02-A Fig 11: connection of the data-/clock interface Page 30 of 36 FEIG ELECTRONIC GmbH ® Installation OBID classic pro ID CPR.02-x 4. Operation 4.1 Address setting (Bus mode with RS485 interface) For Readers with RS232 interfaces usually no address setting is necessary. In case of units with RS485 interface, the unit address can be set either via the DIP-switch on the opened unit (see Fig 5), or via the host. Bus mode with up to 16 Readers: The setting of the individual addresses is executed via the DIP-switches S1, DIP1 - DIP 4 according to the table seen below (DIP5 - DIP8 are unused). Thus, each Reader is being provided with an individual address. Address 10 11 12 13 14 15 DIP 1 OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON DIP 2 OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON DIP 3 OFF OFF OFF OFF ON ON ON ON OFF OFF OFF OFF ON ON ON ON DIP 4 OFF OFF OFF OFF OFF OFF OFF OFF ON ON ON ON ON ON ON ON Bus mode with 16 - 32 Readers: The setting of addresses is executed by the host-PC (host). NOTE: Due to the default value 0 of each Reader, they have to be connected and configured one after another. FEIG ELECTRONIC GmbH Page 31 of 36 ® Installation OBID classic pro ID CPR.02-x 5. Technical data casing Plastic material ASA colour bottom part of casing: similar to RAL 9002 (greyish white) top of casing: similar to RAL 7043 (traffic grey) weight approx. 120 g protective system IP 54 power supply 12 - 24 V AC/DC power consumption max. 2,6 W temperature range -25°C to 60°C relative air humidity 95 % (non-condensing) antenna integrated carrier frequency 13,65 MHz supported Transponder types • • • • signal transmitter 1 x bicolor-LED (red, green, orange) 1 x buzzer relay 1 x normally open capacity of contacts: 24 V AC/DC 1,5 A digital inputs 2 x configurable length of lead-in wire max. 3 m according ISO14443-A according ISO14443-B according ISO15693 I-CODE1 interfaces asynchrony (bi-directional) 4800 to 38400 Baud • RS232 (ID CPR.02-A) length of lead-in wire max. 10 m • RS485 (ID CPR.02-B) max. 32 units on each data bus data / clock (unidirectional) TTL length of lead-in wire max. 3 m • Magnetic Stripe Emulation, track 1 (7 Bit), track 2+3 (5 Bit) • Wiegand Emulation DIP-switch 8-channel EEPROM 10.000 writing cycles Default values (factory alined): asynchronous interface: IN1 IN2 LED-operation control Page 32 of 36 9600 Baud, 8 data- 1 stopbit, even parity activates LED red and relay aktivates LED green and buzzer orange FEIG ELECTRONIC GmbH ® OBID classic pro Installation ID CPR.02-x 5.1 Approval When properly used this radio equipment conforms to the basic requirements of Article 3 and the other relevant provisions of the R&TTE Directive 1999/5/E6 of March 99. FEIG ELECTRONIC GmbH Page 33 of 36 ® OBID classic pro Installation ID CPR.02-x 5.2 Dimensions for concealed installation Fig 12: Dimensions of concealed casing (A) = below Page 34 of 36 FEIG ELECTRONIC GmbH ® OBID classic pro Installation ID CPR.02-x 5.3 Dimensions for surface installation with ID APR-A Fig 13: Dimensions for installation with surface frame ID APR-A (A) = below FEIG ELECTRONIC GmbH Page 35 of 36 ® Installation OBID classic pro ID CPR.02-x 6. System delivery contents: 1 x bottom part of casing (concealed casing) 1 x top of casing with Reader electronic 1 x connection board 1 x adhesive label 1 x thread cutting screw 3,2 x 25 mm (for connecting parts of casing) 2 x thread cutting screws 3,2 x 15 mm (for wall installation) 1 x Installation instructions 6.1 Optional Accessories bottom part of casing for surface installation ID APR-A Order-No.: 1144.001.00 adhesive front label ID AKL.02 Page 36 of 36 Order-No.: 1424.000.00 FEIG ELECTRONIC GmbH
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Producer : Acrobat Distiller 4.05 for Windows Creator : Modify Date : 2002:11:05 13:24:56+01:00 Title : Sicherheits- und Warnhinweise. Create Date : 2002:09:13 07:45:02 Page Count : 36 Page Mode : UseOutlinesEXIF Metadata provided by EXIF.tools