Firmtech FB155BC-F2S BLUETOOTH EMBEDDED MODULE User Manual

Firmtech co., Ltd BLUETOOTH EMBEDDED MODULE

User Manual

Bluetooth Embedded Module FB155BC-F2S-SPP/HID User Guide          Version 0.1        FIRMTECH Co., Ltd. Homepage : http://www.firmtech.co.kr Mail : contact@firmtech.co.kr   Tel : +82-31-719-4812 Fax : +82-31-719-4834
FB155BC-F2S-SPP/HID User Guide Version 0.1 Revision History   Page 2 / 25  Revision History  Revision Date Change Descriptions Ver 0.1 2013-01-16 - Write a draft
FB155BC-F2S-SPP/HID User Guide Version 0.1 (C) Copyright FIRMTECH Co., Ltd. 2005   Page 3 / 25  (C) Copyright FIRMTECH Co., Ltd. 2005 All rights reserved  The  products  and  operation  descriptions  contained  herein  shall  be  protected  by copyright law.   Any part or whole of products or operation description shall not be copied, reproduced, translated, nor transformed into readable form by electronic device or machines, without prior consent in writing by FIRMTECH Co., Ltd. There  might  be  some  misprinting  or  technical  faults  in  the  products  and  operation description which are subject to change without prior notice.
FB155BC-F2S-SPP/HID User Guide Version 0.1 List of Content   Page 4 / 25  List of Content Revision History ...................................................................................................................................................................... 2 (C) Copyright FIRMTECH Co., Ltd. 2005 ..................................................................................................................... 3 List of Content.......................................................................................................................................................................... 4 1 What is Bluetooth? ............................................................................................................................................................ 5 1.1 Features of Bluetooth.......................................................................................................................................... 5 1.2 Operation of Bluetooth ...................................................................................................................................... 5 2 Product Overview ............................................................................................................................................................... 6 3 FB155BC-F2S-SPP Components .................................................................................................................................. 7 3.1 FB155BC-F2S-SPP .................................................................................................................................................. 7 3.2 PC Interface Kit (Option) ................................................................................................................................... 7 4 FB155BC-F2S-SPP Appearance .................................................................................................................................... 8 4.1 FB155BC-F2S-SPP Dimension.......................................................................................................................... 8 4.2 FB155BC-F2S-SPP PIN Assign ......................................................................................................................... 9 5 PC Interface Board (Jig Board)................................................................................................................................. 10 6 Performance of FB155BC-F2S-SPP ......................................................................................................................... 12 7 Current Consumption of FB155BC-F2S-SPP ...................................................................................................... 13 8 FB155BC-F2S -HID Components ............................................................................................................................. 14 8.1 FB155BC-F2S-HID ............................................................................................................................................... 14 9 FB155BC-F2S-HID Appearance ............................................................................................................................... 15 9.1 FB155BC-F2S-HID Dimension ...................................................................................................................... 15 9.2 FB155BC-F2S-HID PIN Assign ...................................................................................................................... 16 10. (Blank) 11 Performance of FB155BC-F2S-HID ...................................................................................................................... 18 12 Current Consumption of FB155BC-F2S-HID ................................................................................................... 19 13 FB155BC-F2S-HID Input Data................................................................................................................................. 20 14 Approval Information ................................................................................................................................................. 25 14.1 KCC ........................................................................................................................................................................... 25 14.2 FCC compliance Information...................................................................................................................... 25 14.3 CE .............................................................................................................................................................................. 25
FB155BC-F2S-SPP/HID User Guide Version 0.1 1 What is Bluetooth?   Page 5 / 25  1 What is Bluetooth? 1.1 Features of Bluetooth  Objectives  of  Bluetooth  :  To  Realize  Wireless  Communication  for  Short  Distance  with  Low  Power Consumption, High Reliability, and Low Cost.  Frequency  in  Use:  To  Use  ISM(Industrial,  Scientific,  Medical)  Band  which  does  not  require  any permission to use. - 2.400 – 2.4835 GHz, 79 channels - 2.465 – 2.4835 GHz, 23 channels (in France)  Transmission Rate : 1Mbps ~ 3Mbps  Transmission Output : 1mW (10m, Class2), 100mW (100m Class1)  Network Configuration :  Configured with  Master and Slave relation.    A  Bluetooth unit shall allow simultaneous connections up to 7 devices (in case of ACL).  Reliability  :  To  Guarantee  stable  wireless  communication  even  under  severe  noisy  environment through adopting the technique of FHSS (Frequency Hopping Spread Spectrum).  1.2 Operation of Bluetooth   <Feature 1-1 Bluetooth Operation>   Bluetooth operates based on the connection between “Master” and “Slave”.  Masters are simply supposed to do “Inquiry” and “Page”. Slaves are supposed to do “Inquiry Scan” and “Page Scan”.  If  a  Master  finds  a  Slave  and  so  “inquiry”  is  successful,  a  Slave  responds  to  the  Master  with  its information.  Interconnection between the Master and the Slave is achieved only if the information from the Slave is corresponded with the Master, and the Slave sends data to the Master.
FB155BC-F2S-SPP/HID User Guide Version 0.1 2 Product Overview   Page 6 / 25  2 Product Overview  FB155BC(S) has been developed to replace the previous RS232 Cable system and HID Keyboard- Mouse Device with wireless communication system to use.  Major Features of FB155BC-F2S 1. Bluetooth Specification 2.1 Support 2. Easily applicable to the Product with 8Pins SMD(Surface-Mount Device) type 3. Support AT Command, and capable to control FB155BC(S) by using AT Command. 4. Easy to connect to use with Bluetooth PDA, Bluetooth USB Dongle, etc. A. FB155BC-F2S-SPP : RS232 Cable Replacement Device. B. FB155BC-F2S-HID : HID Keyboard-Mouse Device.   5. Provides the most compact size among Class 2. 6. Simply support the function of Bluetooth Firmware Update 7. Stable Data Transmission / Receipt  ※  We  request  the  new  users  of  FB155BC-F2S-SPP/HID  to  read  the  information  on  this  description carefully before they start to use the products.
FB155BC-F2S-SPP/HID User Guide Version 0.1 3 FB155BC-F2S-SPP Components   Page 7 / 25  3 FB155BC-F2S-SPP Components 3.1 FB155BC-F2S-SPP MODEL PICTURE Q‟TY (EA) FB155BC-F2S-SPP (On-board Chip Antenna)  1 <Table 3-1 Basic Components of FB155BC-F2S-SPP>  3.2 PC Interface Kit (Option) MODEL PICTURE Q‟TY (EA) FBZx5Xxx (Interface Board)  1 Expansion Board  1 FCA180SC (RS232 Serial Cable)  1 FCA100UC   (USB Power Cable)  1 FCA001PO (DC Power Adapter - 5V) (Option)  1 <Table 3-2 Components of PC Interface Kit >  ※  If you find any of above components is defective, or not included in the package, please contact the seller you purchased.
FB155BC-F2S-SPP/HID User Guide Version 0.1 4 FB155BC-F2S-SPP Appearance   Page 8 / 25  4 FB155BC-F2S-SPP Appearance 4.1 FB155BC-F2S-SPP Dimension    <Figure 4-1 FB155BC-F2S-SPP Dimension>
FB155BC-F2S-SPP/HID User Guide Version 0.1 4 FB155BC-F2S-SPP Appearance   Page 9 / 25  4.2 FB155BC-F2S-SPP PIN Assign   <Figure 4-2 FB155BC-F2S-SPP PIN Assign>   No. Name of Signal Features I / O Level 1 GND Ground   2 VCC 3.3V DC Input  3 STATUS STATUS LED Output TTL 4 FA SET Factory Reset Go back default setting Input TTL 5 UART_CTS UART Clear To Send Input TTL 6 UART_RTS UART Ready To Send Output TTL 7 TXD Transfer Data (Data out) Output TTL 8 RXD Received Data (Data in) Input TTL  <Table 4-1 FB155BC-F2S-SPP Pin Description>
FB155BC-F2S-SPP/HID User Guide Version 0.1 5 PC Interface Board (Jig Board)   Page 10 / 25  5 PC Interface Board (Jig Board)    <Figure 5-1 FB155BC-F2S-SPP Interface Board(Jig Board)>
FB155BC-F2S-SPP/HID User Guide Version 0.1 5 PC Interface Board (Jig Board)   Page 11 / 25  No. Title Description 1 Power ON/OFF Switch ON/OFF the electric power of interface board. 2 USB/RS232 Interface Selection Switch The  switch  for  selection  of  communication  in  USB/RS232 (The 3 switches shall be set in same direction.) 3 PC  Configuration/Operation  Selection Switch Not is use 4 FASET Switch The  switch  for  changing  the  environment  setting  value  of FB155BC-F2S-SPP to the factory setting value.  The procedures to make the FASET are as followings. 1. Power ON 2. Press the FASET switch more than 2 seconds. 5 POWER LED LED to check the power supply condition 6 STATUS LED LED to check the action of FB155BC-F2S-SPP 7 TX LED LED  to  check  the  data  output  condition  of  FB155BC-F2S-SPP 8 RX LED LED to check the data input condition of FB155BC-F2S-SPP 9 SERIAL INTERFACE LED LED  to  check  whether  the  communication interface is  RS-232 10 USB INTERFACE LED LED to check whether the communication interface is USB <Table 5-1 FB155BC-F2S-SPP Interface Board Description>
FB155BC-F2S-SPP/HID User Guide Version 0.1 6 Performance of FB155BC-F2S-SPP   Page 12 / 25  6 Performance of FB155BC-F2S-SPP  No. Part Specification 1 Bluetooth Spec. Bluetooth Specification 2.1 Support 2 Communication distance 10 M 3 Frequency Range 2402 ~ 2480MHz    ISM Band 4 Sensitivity -83dBm (Typical) 5 Transmit Power 4dBm(Typical) 6 Size 18.00 x 21.80 x 3.40 mm 7 Support Bluetooth Profile SPP (Serial Port Profile) 8 Input Power 3.3V 9 Current Consumption 48 mA (Max) 10 Temperature Operating -10℃ ~ 50℃ Limit Operating -35℃ ~ 55℃ 11 Communication Speed 1,200bps – 230,400bps 12 Antenna Chip Antenna 13 Interface UART (TTL Level) 14 Flow Control RTS, CTS support <Table 6-1 FB155BC-F2S-SPP Performance>
FB155BC-F2S-SPP/HID User Guide Version 0.1 7 Current Consumption of FB155BC-F2S-SPP   Page 13 / 25  7 Current Consumption of FB155BC-F2S-SPP  Status Current Consumption (mA) MIN MAX AVG Standby 0 3 1 Inquiry scan & Page scan (Slave) 0 48 22 Page scan (Slave) 0 12 1 Inquiry (Master) 39 45 42 Connected Slave 18 24 21 Master 0 9 4 Data Transmission Slave 24 30 28 Master 18 27 21 Data Reception Slave 21 33 26 Master 21 33 27 Data Transmission/Reception Slave 27 33 29 Master 21 33 28 Power save Slave 0 6 1 Master 0 9 2 <Table 7-1 Current Consumption of FB155BC(S)-SPP>  TEST CONDITIONS Baud Rate : 9600 bps, Input Voltage : DC 5V The power consumption will change depending on transmission speed and volume of data.
FB155BC-F2S-SPP/HID User Guide Version 0.1 9 FB155BC-F2S-HID Appearance   Page 15 / 25  9 FB155BC-F2S-HID Appearance 9.1 FB155BC-F2S-HID Dimension    <Figure 9-1 FB155BC-F2S-HID Dimension>
FB155BC-F2S-SPP/HID User Guide Version 0.1 9 FB155BC-F2S-HID Appearance   Page 16 / 25  9.2 FB155BC-F2S-HID PIN Assign   <Figure 9-2 FB155BC-F2S-HID PIN Assign>   No. Name of Signal Features I / O Level 1 GND Ground   2 VCC 3.3V DC Input  3 STATUS STATUS LED Output TTL 4 MULTI FUNCTION Multi Function Control Input TTL (Full-up) 5 NC None Connect   6 HID STATUS HID Status Output TTL 7 TXD Transfer Data (Data out) Output TTL 8 RXD Received Data (Data in) Output TTL <Table 9-1 FB155BC-F2S-HID Pin Description>
FB155BC-F2S-SPP/HID User Guide Version 0.1 11 Performance of FB155BC-F2S-HID   Page 18 / 25  11 Performance of FB155BC-F2S-HID  No. Part Specification 1 Bluetooth Spec. Bluetooth Specification 2.1 Support 2 Communication distance 10 M 3 Frequency Range 2402 ~ 2480MHz ISM Band 4 Sensitivity -83dBm (Typical) 5 Transmit Power 0dBm(Typical) 6 Size 18.00 x 21.80 x 3.40 mm 7 Support Bluetooth Profile HID Device 8 Input Power 3.3V 9 Current Consumption 48 mA (Max) 10 Operating Temperature -10℃ ~ 50℃ 11 Communication Speed 115,200 bps 12 Antenna Chip Antenna 13 Interface UART (TTL Level) <Table 11-1 FB155BC-F2S-HID Performance>
FB155BC-F2S-SPP/HID User Guide Version 0.1 12 Current Consumption of FB155BC-F2S-HID   Page 19 / 25  12 Current Consumption of FB155BC-F2S-HID  Status Current Consumption (mA) MIN MIN MIN Standby 0 3 1 Inquiry scan & Page scan (Slave) 0 48 22 Page scan (Slave) 0 12 1 Connected 18 24 21 Data Transmission 24 30 28 Data Reception 21 33 26 Data Transmission/Reception 27 33 29 Power save 0 6 1 <Table 12-1 Current Consumption of FB155BC-F2S-HID>  TEST CONDITIONS Baud Rate : 115200 bps, Input Voltage : DC 5V The power consumption will change depending on transmission speed and volume of data.
FB155BC-F2S-SPP/HID User Guide Version 0.1 13 FB155BC-F2S-HID Input Data   Page 20 / 25  13 FB155BC-F2S-HID Input Data  - UART HID Report ID 1 Format (Keyboard) Byte Value Description 0 (first byte in packet) 0x0c Length of packet in bytes (12) 1 0x00 Type of packet: Forward HID Report 2 0xa1 HID input Report Header 3 0x01 Keyboard Report ID 1 4 0x00 to 0xff Modifier Keys 5 0x00 Reserved 6 0x00 to 0xff Keycode 1 7 0x00 to 0xff Keycode 2 8 0x00 to 0xff Keycode 3 9 0x00 to 0xff Keycode 4 10 0x00 to 0xff Keycode 5 11 0x00 to 0xff Keycode 6 <Table 13-1 UART HID Report ID 1 Format>  - Modifier Keys Bit Bit 0 Bit 1 Bit 2 Bit 3 Bit 4 Bit 5 Bit 6 Bit 7 Description LEFT CTRL LEFT SHIFT LEFT ALT LEFT GUI RIGHT CTRL RIGHT SHIFT RIGHT ALT RIGHT GUI <Table 13-2 Modifier Keys>     - Pointer Report Format (Mouse) Byte Value Description 0 (first byte in packet) 0x08 Length of packet in bytes (8) 1 0x00 Type of packet: Forward HID Report 2 0xa1 HID input Report Header
FB155BC-F2S-SPP/HID User Guide Version 0.1 13 FB155BC-F2S-HID Input Data   Page 21 / 25  3 0x02 Keyboard Report ID 2 4 0x00 to 0xff Up to 5 buttons, one bit each 5 0x00 to 0xff Delta X Number between -127 and +127 representing the change in mouse movement on the x-axis 6 0x00 to 0xff Delta Y Number between -127 and +127 representing the change in mouse movement on the y-axis 7 0x00 to 0xff Wheel movement Number between -127 and +127 representing the amount of wheel movement <Table 13-3 Pointer Report Format>  - Mouse Button Bit Bit 0 Bit 1 Bit 2 Bit 3 Bit 4 Bit 5 Bit 6 Bit 7 Description Left Button Right Button Middle Button Always 1 Reserved Reserved Reserved Reserved <Table 13-4 Mouse Button>   - ASCII to Keycode Table (Keyboard) ASCII Char ASCII value Keycode ASCII Char ASCII value Keycode Ctrl-H BS (Back Space) 0x08 0x2A Ctrl-I HT (Tab) 0x09 0x2B Ctrl-M CR (Carriage Return) 0x0D 0x28 Ctrl-[ ESC (Esc) 0x1B 0x29 Space 0x20 0x2C „ 0x27 0x34 , 0x2C 0x36 - 0x2D 0x2D . 0x2E 0x37 / 0x2F 0x38 0 0x30 0x27 1 0x31 0x1E 2 0x32 0x1F 3 0x33 0x20 4 0x34 0x21 5 0x35 0x22 6 0x36 0x23 7 0x37 0x24 8 0x38 0x25 9 0x39 0x26
FB155BC-F2S-SPP/HID User Guide Version 0.1 13 FB155BC-F2S-HID Input Data   Page 22 / 25  ; 0x3B 0x33 = 0x3D 0x2E [ 0x5B 0x2F \ 0x5C 0x31 ] 0x5D 0x30 ` 0x60 0x35 a 0x61 0x04 b 0x62 0x05 c 0x63 0x06 d 0x64 0x07 e 0x65 0x08 f 0x66 0x09 g 0x67 0x0A h 0x68 0x0B i 0x69 0x0C j 0x6A 0x0D k 0x6B 0x0E l 0x6C 0x0F m 0x6D 0x10 n 0x6E 0x11 o 0x6F 0x12 p 0x70 0x13 q 0x71 0x14 r 0x72 0x15 s 0x73 0x16 t 0x74 0x17 u 0x75 0x18 v 0x76 0x19 w 0x77 0x1A x 0x78 0x1B y 0x79 0x1C z 0x7A 0x1D ! ( Shift+1 ) 0x21 0x1E “ ( Shift+„ ) 0x22 0x34 # ( Shift+3 ) 0x23 0x20 $ ( Shift+4 ) 0x24 0x21 % ( Shift+5 ) 0x25 0x22 & ( Shift+7 ) 0x26 0x24 ( ( Shift+9 ) 0x28 0x26 ) ( Shift+0 ) 0x29 0x27 * ( Shift+8 ) 0x2A 0x25 + ( Shift+= ) 0x2B 0x2E : ( Shift+; ) 0x3A 0x33 < ( Shift+, ) 0x3C 0x36 > ( Shift+. ) 0x3C 0x36 ? ( Shift+/ ) 0x3F 0x38 @ ( Shift+2 ) 0x40 0x1F A ( Shift+a ) 0x41 0x04
FB155BC-F2S-SPP/HID User Guide Version 0.1 13 FB155BC-F2S-HID Input Data   Page 23 / 25  B ( Shift+b ) 0x42 0x05 C ( Shift+c ) 0x43 0x06 D ( Shift+d ) 0x44 0x07 E ( Shift+e ) 0x45 0x08 F ( Shift+f ) 0x46 0x09 G ( Shift+g ) 0x47 0x0A H ( Shift+h ) 0x48 0x0B I ( Shift+I ) 0x49 0x0C J ( Shift+j ) 0x4A 0x0D K ( Shift+k ) 0x4B 0x0E L ( Shift+l ) 0x4C 0x0F M ( Shift+m ) 0x4D 0x10 N ( Shift+n ) 0x4E 0x11 O ( Shift+o ) 0x4F 0x12 P ( Shift+p ) 0x50 0x13 Q ( Shift+q ) 0x51 0x14 R ( Shift+r ) 0x52 0x15 S ( Shift+s ) 0x53 0x16 T ( Shfit+t ) 0x54 0x17 U ( Shift+u ) 0x55 0x18 V ( Shift+v ) 0x56 0x19 W ( Shift+w ) 0x57 0x1A X ( Shift+x ) 0x58 0x1B Y ( Shift+y ) 0x59 0x1C Z ( Shift+z ) 0x5A 0x1D ^ ( Shift+6 ) 0x5E 0x23 _ ( Shift+- ) 0x5F 0x2D { ( Shift+[ ) 0x7B 0x2F | ( Shift+\ ) 0x7C 0x31 } ( Shift+] ) 0x7D 0x30 ~ ( Shift+` ) 0x7E 0x35    <Table 13-5 ASCII to Keycode table>
FB155BC-F2S-SPP/HID User Guide Version 0.1 13 FB155BC-F2S-HID Input Data   Page 24 / 25  Ex) To send Keyboard data “1”  Byte 0 1 2 3 4 5 6 7 8 9 10 11 Pressed 0x0c 0x00 0xa1 0x01 0x00 0x00 0x1e 0x00 0x00 0x00 0x00 0x00 Released 0x0c 0x00 0xa1 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00   Ex) To send Keyboard data “a”  Byte 0 1 2 3 4 5 6 7 8 9 10 11 Pressed 0x0c 0x00 0xa1 0x01 0x00 0x00 0x04 0x00 0x00 0x00 0x00 0x00 Released 0x0c 0x00 0xa1 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00   Ex) To send Keyboard data “A”  Byte 0 1 2 3 4 5 6 7 8 9 10 11 Pressed 0x0c 0x00 0xa1 0x01 0x02 0x00 0x04 0x00 0x00 0x00 0x00 0x00 Released 0x0c 0x00 0xa1 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00      14 Approval Information 14. CE Hereby, FIRMTECH Co., Ltd, declares that this FB155BC is in compliance with the essential   requirements and other relevant provisions of directive 1999/5/EC.  14.2 FCC compliance Information
FB155BC-F2S-SPP/HID User Guide Version 0.1 14 Approval Information    Page 25 / 25   FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.  Caution Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.  FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:   (1) This device may not cause harmful interference, and   (2) this device must accept any interference received, including interference that may cause undesired operation  IMPORTANT NOTE: FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.  This device is intended only for OEM integrators under the following conditions:   1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and     2) The transmitter module may not be co-located with any other transmitter or antenna,     3) OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change.   As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.).   IMPORTANT NOTE:    In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.      Maximum antenna gain allowed for use with this device is 1.59 dBi  End Product Labeling  This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: U8D-FB155BC”  Manual Information To the End User   The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.

Navigation menu