Bluetooth Embedded Module
FB155BC-F2S-SPP/HID User Guide
Version 0.1
FIRMTECH Co., Ltd.
Homepage : http://www.firmtech.co.kr
Mail : contact@firmtech.co.kr
Tel : +82-31-719-4812
Fax : +82-31-719-4834
FB155BC-F2S-SPP/HID User Guide Version 0.1
Revision History
Revision History
Revision
Date
Ver 0.1
2013-01-16
Change Descriptions
- Write a draft
Page 2 / 25
FB155BC-F2S-SPP/HID User Guide Version 0.1
(C) Copyright FIRMTECH Co., Ltd. 2005
(C) Copyright FIRMTECH Co., Ltd. 2005
All rights reserved
The products and operation descriptions contained herein shall be protected by
copyright law.
Any part or whole of products or operation description shall not be copied, reproduced,
translated, nor transformed into readable form by electronic device or machines, without
prior consent in writing by FIRMTECH Co., Ltd.
There might be some misprinting or technical faults in the products and operation
description which are subject to change without prior notice.
Page 3 / 25
FB155BC-F2S-SPP/HID User Guide Version 0.1
List of Content
List of Content
Revision History ......................................................................................................................................................................2
(C) Copyright FIRMTECH Co., Ltd. 2005 .....................................................................................................................3
List of Content..........................................................................................................................................................................4
1 What is Bluetooth? ............................................................................................................................................................5
1.1 Features of Bluetooth..........................................................................................................................................5
1.2 Operation of Bluetooth ......................................................................................................................................5
2 Product Overview ...............................................................................................................................................................6
3 FB155BC-F2S-SPP Components ..................................................................................................................................7
3.1 FB155BC-F2S-SPP ..................................................................................................................................................7
3.2 PC Interface Kit (Option) ...................................................................................................................................7
4 FB155BC-F2S-SPP Appearance ....................................................................................................................................8
4.1 FB155BC-F2S-SPP Dimension..........................................................................................................................8
4.2 FB155BC-F2S-SPP PIN Assign .........................................................................................................................9
5 PC Interface Board (Jig Board)................................................................................................................................. 10
6 Performance of FB155BC-F2S-SPP ......................................................................................................................... 12
7 Current Consumption of FB155BC-F2S-SPP...................................................................................................... 13
8 FB155BC-F2S -HID Components ............................................................................................................................. 14
8.1 FB155BC-F2S-HID ............................................................................................................................................... 14
FB155BC-F2S-HID Appearance ............................................................................................................................... 15
9.1 FB155BC-F2S-HID Dimension ...................................................................................................................... 15
9.2 FB155BC-F2S-HID PIN Assign ...................................................................................................................... 16
10. (Blank)
11 Performance of FB155BC-F2S-HID ...................................................................................................................... 18
12 Current Consumption of FB155BC-F2S-HID ................................................................................................... 19
13 FB155BC-F2S-HID Input Data................................................................................................................................. 20
14 Approval Information ................................................................................................................................................. 25
14.1 KCC........................................................................................................................................................................... 25
14.2 FCC compliance Information...................................................................................................................... 25
14.3 CE.............................................................................................................................................................................. 25
Page 4 / 25
FB155BC-F2S-SPP/HID User Guide Version 0.1
1 What is Bluetooth?
1 What is Bluetooth?
1.1 Features of Bluetooth
Objectives of Bluetooth : To Realize Wireless Communication for Short Distance with Low Power
Consumption, High Reliability, and Low Cost.
Frequency in Use: To Use ISM(Industrial, Scientific, Medical) Band which does not require any
permission to use.
2.400 – 2.4835 GHz, 79 channels
2.465 – 2.4835 GHz, 23 channels (in France)
Transmission Rate : 1Mbps ~ 3Mbps
Transmission Output : 1mW (10m, Class2), 100mW (100m Class1)
Network Configuration : Configured with Master and Slave relation.
A Bluetooth unit shall allow
simultaneous connections up to 7 devices (in case of ACL).
Reliability : To Guarantee stable wireless communication even under severe noisy environment
through adopting the technique of FHSS (Frequency Hopping Spread Spectrum).
1.2 Operation of Bluetooth
Bluetooth operates based on the connection between Master and Slave .
Masters are simply supposed to do Inquiry and Page . Slaves are supposed to do Inquiry Scan
and Page Scan .
If a Master finds a Slave and so inquiry is successful, a Slave responds to the Master with its
information.
Interconnection between the Master and the Slave is achieved only if the information from the
Slave is corresponded with the Master, and the Slave sends data to the Master.
Page 5 / 25
FB155BC-F2S-SPP/HID User Guide Version 0.1
2 Product Overview
2 Product Overview
FB155BC(S) has been developed to replace the previous RS232 Cable system and HID Keyboard- Mouse
Device with wireless communication system to use.
Major Features of FB155BC-F2S
1.
Bluetooth Specification 2.1 Support
2.
Easily applicable to the Product with 8Pins SMD(Surface-Mount Device) type
3.
Support AT Command, and capable to control FB155BC(S) by using AT Command.
4.
Easy to connect to use with Bluetooth PDA, Bluetooth USB Dongle, etc.
A.
FB155BC-F2S-SPP : RS232 Cable Replacement Device.
B.
FB155BC-F2S-HID : HID Keyboard-Mouse Device.
5.
Provides the most compact size among Class 2.
6.
Simply support the function of Bluetooth Firmware Update
7.
Stable Data Transmission / Receipt
※ We request the new users of FB155BC-F2S-SPP/HID to read the information on this description
carefully before they start to use the products.
Page 6 / 25
FB155BC-F2S-SPP/HID User Guide Version 0.1
3 FB155BC-F2S-SPP Components
3 FB155BC-F2S-SPP Components
3.1 FB155BC-F2S-SPP
MODEL
PICTURE
FB155BC-F2S-SPP
Q TY (EA)
(On-board Chip Antenna)
3.2 PC Interface Kit (Option)
MODEL
PICTURE
FBZx5Xxx
Q TY (EA)
(Interface Board)
Expansion Board
FCA180SC
(RS232 Serial Cable)
FCA100UC
(USB Power Cable)
FCA001PO
(DC Power Adapter - 5V)
(Option)
※ If you find any of above components is defective, or not included in the package, please contact the seller
you purchased.
Page 7 / 25
FB155BC-F2S-SPP/HID User Guide Version 0.1
4 FB155BC-F2S-SPP Appearance
4 FB155BC-F2S-SPP Appearance
4.1 FB155BC-F2S-SPP Dimension
Page 8 / 25
FB155BC-F2S-SPP/HID User Guide Version 0.1
4 FB155BC-F2S-SPP Appearance
4.2 FB155BC-F2S-SPP PIN Assign
No.
Name of Signal
Features
GND
Ground
VCC
3.3V DC
STATUS
STATUS LED
FA SET
UART_CTS
I/O
Level
Input
Output
TTL
Input
TTL
UART Clear To Send
Input
TTL
UART_RTS
UART Ready To Send
Output
TTL
TXD
Transfer Data (Data out)
Output
TTL
RXD
Received Data (Data in)
Input
TTL
Factory Reset
Go back default setting
Page 9 / 25
FB155BC-F2S-SPP/HID User Guide Version 0.1
5 PC Interface Board (Jig Board)
5 PC Interface Board (Jig Board)
Page 10 / 25
FB155BC-F2S-SPP/HID User Guide Version 0.1
No.
Title
Power ON/OFF Switch
USB/RS232 Interface Selection Switch
5 PC Interface Board (Jig Board)
PC Configuration/Operation Selection
Switch
Description
ON/OFF the electric power of interface board.
The switch for selection of communication in USB/RS232
(The 3 switches shall be set in same direction.)
Not is use
The switch for changing the environment setting value of
FB155BC-F2S-SPP to the factory setting value.
FASET Switch
The procedures to make the FASET are as followings.
1. Power ON
2. Press the FASET switch more than 2 seconds.
POWER LED
LED to check the power supply condition
STATUS LED
LED to check the action of FB155BC-F2S-SPP
TX LED
RX LED
SERIAL INTERFACE LED
10
USB INTERFACE LED
LED to check the data output condition of FB155BC-F2SSPP
LED to check the data input condition of FB155BC-F2S-SPP
LED to check whether the communication interface is RS232
LED to check whether the communication interface is USB
Page 11 / 25
FB155BC-F2S-SPP/HID User Guide Version 0.1
6 Performance of FB155BC-F2S-SPP
6 Performance of FB155BC-F2S-SPP
No.
Part
Specification
Bluetooth Spec.
Bluetooth Specification 2.1 Support
Communication distance
10 M
Frequency Range
2402 ~ 2480MHz
Sensitivity
-83dBm (Typical)
Transmit Power
4dBm(Typical)
Size
18.00 x 21.80 x 3.40 mm
Support Bluetooth Profile
SPP (Serial Port Profile)
Input Power
3.3V
Current Consumption
48 mA (Max)
10
Operating
-10℃ ~ 50℃
Limit Operating
-35℃ ~ 55℃
ISM Band
Temperature
11
Communication Speed
1,200bps – 230,400bps
12
Antenna
Chip Antenna
13
Interface
UART (TTL Level)
14
Flow Control
RTS, CTS support
Page 12 / 25
FB155BC-F2S-SPP/HID User Guide Version 0.1
7 Current Consumption of FB155BC-F2S-SPP
7 Current Consumption of FB155BC-F2S-SPP
Current Consumption (mA)
Status
MIN
MAX
AVG
Standby
Inquiry scan & Page scan (Slave)
48
22
Page scan (Slave)
12
Inquiry (Master)
39
45
42
Slave
18
24
21
Master
Slave
24
30
28
Master
18
27
21
Slave
21
33
26
Master
21
33
27
Slave
27
33
29
Master
21
33
28
Slave
Master
Connected
Data Transmission
Data Reception
Data Transmission/Reception
Power save
TEST CONDITIONS
Baud Rate : 9600 bps, Input Voltage : DC 5V
The power consumption will change depending on transmission speed and volume of data.
Page 13 / 25
FB155BC-F2S-SPP/HID User Guide Version 0.1
9 FB155BC-F2S-HID Appearance
9 FB155BC-F2S-HID Appearance
9.1 FB155BC-F2S-HID Dimension
Page 15 / 25
FB155BC-F2S-SPP/HID User Guide Version 0.1
9 FB155BC-F2S-HID Appearance
9.2 FB155BC-F2S-HID PIN Assign
No.
Name of Signal
Features
I/O
Level
GND
Ground
VCC
3.3V DC
STATUS
STATUS LED
MULTI FUNCTION
Multi Function Control
NC
None Connect
HID STATUS
HID Status
Output
TTL
TXD
Transfer Data (Data out)
Output
TTL
RXD
Received Data (Data in)
Output
TTL
Input
Output
Input
TTL
TTL
(Full-up)
Page 16 / 25
FB155BC-F2S-SPP/HID User Guide Version 0.1
11 Performance of FB155BC-F2S-HID
11 Performance of FB155BC-F2S-HID
No.
Part
Specification
Bluetooth Spec.
Bluetooth Specification 2.1 Support
Communication distance
10 M
Frequency Range
2402 ~ 2480MHz ISM Band
Sensitivity
-83dBm (Typical)
Transmit Power
0dBm(Typical)
Size
18.00 x 21.80 x 3.40 mm
Support Bluetooth Profile
HID Device
Input Power
3.3V
Current Consumption
48 mA (Max)
10
Operating Temperature
-10℃ ~ 50℃
11
Communication Speed
115,200 bps
12
Antenna
Chip Antenna
13
Interface
UART (TTL Level)
Page 18 / 25
FB155BC-F2S-SPP/HID User Guide Version 0.1
12 Current Consumption of FB155BC-F2S-HID
12 Current Consumption of FB155BC-F2S-HID
Current Consumption (mA)
Status
MIN
MIN
MIN
Standby
Inquiry scan & Page scan (Slave)
48
22
Page scan (Slave)
12
Connected
18
24
21
Data Transmission
24
30
28
Data Reception
21
33
26
Data Transmission/Reception
27
33
29
Power save
TEST CONDITIONS
Baud Rate : 115200 bps, Input Voltage : DC 5V
The power consumption will change depending on transmission speed and volume of data.
Page 19 / 25
FB155BC-F2S-SPP/HID User Guide Version 0.1
13 FB155BC-F2S-HID Input Data
13 FB155BC-F2S-HID Input Data
- UART HID Report ID 1 Format (Keyboard)
Byte
Value
Description
0 (first byte in packet)
0x0c
Length of packet in bytes (12)
0x00
Type of packet: Forward HID Report
0xa1
HID input Report Header
0x01
Keyboard Report ID 1
0x00 to 0xff
Modifier Keys
0x00
Reserved
0x00 to 0xff
Keycode 1
0x00 to 0xff
Keycode 2
0x00 to 0xff
Keycode 3
0x00 to 0xff
Keycode 4
10
0x00 to 0xff
Keycode 5
11
0x00 to 0xff
Keycode 6
- Modifier Keys
Bit
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Description
LEFT
LEFT
LEFT
LEFT
RIGHT
RIGHT
RIGHT
RIGHT
CTRL
SHIFT
ALT
GUI
CTRL
SHIFT
ALT
GUI
- Pointer Report Format (Mouse)
Byte
Value
Description
0 (first byte in packet)
0x08
Length of packet in bytes (8)
0x00
Type of packet: Forward HID Report
0xa1
HID input Report Header
Page 20 / 25
FB155BC-F2S-SPP/HID User Guide Version 0.1
13 FB155BC-F2S-HID Input Data
0x02
Keyboard Report ID 2
0x00 to 0xff
Up to 5 buttons, one bit each
Delta X
Number between -127 and +127 representing the
0x00 to 0xff
change in mouse movement on the x-axis
Delta Y
0x00 to 0xff
Number between -127 and +127 representing the
change in mouse movement on the y-axis
Wheel movement
0x00 to 0xff
Number between -127 and +127 representing the
amount of wheel movement
- Mouse Button
Bit
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Description
Left
Right
Middle
Always
Reserved
Reserved
Reserved
Reserved
Button
Button
Button
ASCII value
Keycode
0x09
0x2B
0x1B
0x29
0x27
0x34
Page 23 / 25
FB155BC-F2S-SPP/HID User Guide Version 0.1
13 FB155BC-F2S-HID Input Data
Ex) To send Keyboard data 1
Byte
10
11
Pressed
0x0c
0x00
0xa1
0x01
0x00
0x00
0x1e
0x00
0x00
0x00
0x00
0x00
Released
0x0c
0x00
0xa1
0x01
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
Ex) To send Keyboard data a
Byte
10
11
Pressed
0x0c
0x00
0xa1
0x01
0x00
0x00
0x04
0x00
0x00
0x00
0x00
0x00
Released
0x0c
0x00
0xa1
0x01
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
Ex) To send Keyboard data A
Byte
10
11
Pressed
0x0c
0x00
0xa1
0x01
0x02
0x00
0x04
0x00
0x00
0x00
0x00
0x00
Released
0x0c
0x00
0xa1
0x01
0x02
0x00
0x00
0x00
0x00
0x00
0x00
0x00
14 Approval Information
14.
Page 24 / 25
FB155BC-F2S-SPP/HID User Guide Version 0.1
14 Approval Information
FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution
Modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation
IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna,
3) OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change.
As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements
required with this module installed (for example, digital device emissions, PC peripheral requirements,
etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer
considered valid and the FCC ID can not be used on the final product. In these circumstances, the
OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and
obtaining a separate FCC authorization.
Maximum antenna gain allowed for use with this device is 1.59 dBi
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such
that 20 cm may be maintained between the antenna and users. The final end product must be labeled
in a visible area with the following: “Contains FCC ID: U8D-FB155BC”
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to
install or remove this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
Page 25 / 25
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.6
Linearized : Yes
Encryption : Standard V4.4 (128-bit)
User Access : Print, Extract, Print high-res
Author : cwpark
Create Date : 2013:01:29 09:54:27Z
Modify Date : 2013:02:18 17:21:04+09:00
Has XFA : No
Language : ko-KR
Tagged PDF : Yes
XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format : application/pdf
Creator : cwpark
Creator Tool : Microsoft® Office Word 2007
Metadata Date : 2013:02:18 17:21:04+09:00
Producer : Microsoft® Office Word 2007
Document ID : uuid:ac2bd615-867a-4a4f-b429-91e199e13a04
Instance ID : uuid:f49876c9-a46d-448f-8adb-957c8ec8e28a
Page Count : 23
