FitLinxx CB Wireless Cardio Network Adapter User Manual Wireless Signal Meter WSM

Download:
Mirror Download [FCC.gov]
Document ID	825656
Application ID	kq+p1uHLJJAZaOCrgiOsiw==
Document Description	Exhibit D Users Manual per 2 1033 b3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.47kB (80918 bits)
Date Submitted	2007-08-06 00:00:00
Date Available	2007-08-06 00:00:00
Creation Date	2007-04-24 19:05:49
Producing Software	OpenOffice.org 2.2
Document Lastmod	0000-00-00 00:00:00
Document Title	Wireless Signal Meter (WSM)
Document Creator	Writer

PROPRIETARY
FitSense Technology
CBM
User Guide
Doc Number: 930-00003-01
Proprietary Information
Revision History
DATE
REVISION
4/04/2007
01
4/23/2007
02
DESCRIPTION
Initial release
Saftey approval updates and FCC modifications
AUTHOR
Steven Oliver
John MacLean
Approvals
The information contained in this document is the sole property of FitSense Technology. Any
reproduction in part or whole without the written permission of FitSense Technology is
prohibited.
CSAFE BODYLAN MODULE
DOC #: 930-00003-01
REVISION: 01
1 User Guide
1.1
Introduction:
The CSAFE BodyLan Module (CBM) provides wireless communication between a CSAFE equipped
fitness equipment and the Local Acess Point or Remote Acess Point. Included with a CBM is a 12 inch
flat data cable.
1.
Installation:
Installaton and Serviceing is only to be performed by a qualified
technician trained by FitLinxx in the installation of this module.
1. Locate the CSAFE port on the fitness equipment console.
2. The CBM needs to be placed near the CSAFE port and just below the top of the equipments
console
3. With a cleaning solvent clean the area on the console where the CBM is going to be placed.
4. On the back of the CBM, peel off the protective cover of the Velcro adhesive and attach it to the
console.
5. Insert the small connector end of the data cable into the CBM and the larger end connector into
the CSAFE port on the console.
© 2006 FITSENSE TECHNOLOGY
CONFIDENTIAL
PAGE 2 OF
CSAFE BODYLAN MODULE
1.3
DOC #: 930-00003-01
REVISION: 01
Operation:
The following LED configurations represent the operation modes of the CBM.
(●)
(●)
(●)
(●)
GREEN Solid
CSAFE port is providing power
(●)
(●)
(●)
(●)
GREEN Solid
YELLOW Solid
CSAFE port is providing power
CSAFE port is communicating with the CBM
(●)
(●)
(●)
(●)
GREEN Solid
YELLOW Solid
YELLOW Solid
CSAFE port is providing power
CSAFE port is communicating with the CBM
Wireless communication between the CBM and the LAP or RAP
(●)
(●)
(●)
(●)
GREEN Blinking
CBM is in low power mode
RED Solid
Attention required
(●)
(●)
(●)
(●)
1.4
Regulatory:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operations.
Changes or modifications not expressly approved by the party responsible for compliance
could void the users authority to operate the device.
WARNING
Rating 4.7V - 20V 20ma - - -
No operator serviceable parts
© 2006 FITSENSE TECHNOLOGY
CONFIDENTIAL
PAGE 3 OF

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 3
Title                           : Wireless Signal Meter (WSM)
Subject                         : Wireless Signal Meter (WSM)
Keywords                        : FitSense, FitLinxx, CSAFE, BodyLAN
Creator                         : Writer
Producer                        : OpenOffice.org 2.2
Create Date                     : 2007:04:24 19:05:49-04:00

EXIF Metadata provided by EXIF.tools