Program Edit Sequence

Program:Edit Sequence Program:Edit Sequence Program:Edit Sequence Manual fitlight 3:

2018-05-21

: Fitlight Program Edit Sequence Program_Edit Sequence system_operations

Open the PDF directly: View PDF PDF.
Page Count: 3

DownloadProgram Edit Sequence
Open PDF In BrowserView PDF
SYSTEM OPERATION
PROGRAM OR EDIT A SEQUENCE

PROGRAM A SEQUENCE
After Program Sequences is selected, select “New” to begin the process of programming the FITLIGHTS™. To learn more
about the features (Import, Export and New Group ) please refer to the Saving, Searching and Grouping Manual.
Select “New Step”. A drop-down menu will appear to enable you to select the FITLIGHT™ number.
1.

Select the FITLIGHT™ number by scrolling down.

2.

Once the number appears in the window, touch “OK”. In this example, FITLIGHT™ #1 is selected.

3.

Once “Ok” is selected a new screen will appear which will allow the selection of all the FITLIGHT™ parameters.

Repeat the process as per the previous step for all subsequent FITLIGHTS™ required for the routine

1

SYSTEM OPERATION

Indicates FITLIGHT™ #1 is the first step and it is Blue.

b.

Impact only

The FITLIGHT™ parameters can now be selected as per requirements.

c.

Both (meaning the FITLIGHTS™ can be deactivated by
motion or impact)

1.

DISTANCE: Indicates the deactivation range from the center of
the FITLIGHT™. The distance can be set from 10 cms to 80 cms.

5.

2.

TIMEOUT: The Timeout can be set from 0.10 seconds to 120
seconds. The TIMEOUT increments are .10 seconds up to 10
seconds, after which it increases by 5 seconds. The “Time Out”
function can also be turned off by going past 120 seconds.

LIGHT MODE: There are 3 choices of Light mode: Center only,
Full light and Ring only. Please refer to “Parameter Explanations”
for more information.

6.

LED MODE: Select the “LED” mode of the FITLIGHT™. There
are 4 selections which will have the LEDs flash rapidly or slowly
etc. per your preference and ease of visibility. Please refer to
“Parameter Explanations” for more information.

7.

BEEP MODE: Select if sound (Beep) is required.

3.
4.

COLOUR: Select FITLIGHT™ colour as required by selecting the
colour box.
SENSORE MODE: There are 3 deactivation modes to select from:
a.

Distance only

2

SYSTEM OPERATION

8.

SAVE: Select “Save” to save your program, a drop-down menu
will appear to enable you to name the program as required.

9.

CLEAR: This removes all data. A drop-down menu will appear
to query if you are sure as all data inputs will be cleared and
cannot be recovered.

10. Select “Apply to All” if you require the FITLIGHTS™ to have all of
the same parameters.

11. IMPACT SENSITIVITY: Select the sensitivity of ‘Impact” as
required. The higher the value the less sensitive the deactivation
requires (i.e. the more force that is required for the FITLIGHT™
to be deactivated upon impact).
12. DELAY: The interval between FITLIGHTS™ activating in
succession.

PLEASE NOTE: Depending on the Tablet Controller that you have, you may have to scroll up/down
within the “Sequence Step Setup” to view all of the options.

3
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Create Date                     : 2018:05:12 11:54:24+06:00
Metadata Date                   : 2018:05:12 11:54:24+06:00
Modify Date                     : 2018:05:12 11:54:24+06:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:536c8754-b255-4f8c-975f-4eb390b34a25
Original Document ID            : xmp.did:02D7BA58FC2BE811A49AFA21188103D0
Document ID                     : xmp.id:D2D46672A855E811B9A6ED209137EF0E
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:8404E8D37741E8119222ADEF9C9165AB
Derived From Document ID        : xmp.did:960658F97641E8119222ADEF9C9165AB
Derived From Original Document ID: xmp.did:02D7BA58FC2BE811A49AFA21188103D0
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2018:05:12 11:54:24+06:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 3
Creator                         : Adobe InDesign CS6 (Windows)
EXIF Metadata provided by EXIF.tools

Navigation menu