Flairency SL-1550-T90 Liscensed Non-Braodcast Station A/V Transmitter User Manual SL 1550 T90 Manual pub

Flair Agency Liscensed Non-Braodcast Station A/V Transmitter SL 1550 T90 Manual pub

Users Manual

FEATURES: ►FCC Part 90 Compliant ►32 Preset Channels Available to Select From ►Each Channel can be Preset to any Frequency Between 2.460GHz and 2.472GHz with 1 MHz Resolution ►10 Power Levels Selectable from between 1mW and 1Watt ►Wide 10VDC to 40VDC Input Power Range ►4 Digit LED Display of Selected Channel ►4 Digit LED Display of Power Level ►Easy to Use Channel Selection Buttons ►Compact and Lightweight ELITE–SERIES Model: SL-1550-T90 Contact: NextLink Video Communications Tel: 1-520-889-1340 Introducing the most full featured Wireless Audio/Visual Transmitter available on the market today for mobile broadcast applications Wireless 2.4 GHz A/V Transmitter ►NTSC Video Input ►Line Level Audio Input ►Locking Power Connector ►Built In Camera Mount FCC ID: XXXYYYYYYYYYYY
Elite Series Wireless A/V Transmitter Model SL-1550-T90 Specifications Summary ► Channels: 32 Programmable Preset Channels ► Frequency Range: 2.460GHz—2.472GHz ► Programmable Resolution: 1 MHz ► RF Power: Compliant with FCC Part 90 ► Antenna Connector: SMA ► Antenna Type: Tilt Swivel Base 0db Gain ► Input Power: 10VDC-40VDC @ < 1A ► Warranty: 1 Year (Specifications subject to change without notice) ► Size: 4.12” x 3.67” x 1.25” ► Weight: 300 Grams ► Case Type: Extruded Aluminum ► Video Connector: BNC ► Audio Connector: RCA ► Power Connector: 3 Pin Locking DIN ► Operating Temperature: -20° to 120° F (-30o to +50o C) To set the transmission Channel: 1) Press the Channel Set button for 1 second and release. The Channel LED display will begin to flash. 2) Press the ▲ or ▼ buttons until the desired Channel is displayed. 3) Press the Channel Set button to store and the Channel LED display will stop flashing. To set the transmission Power Level: 1) Press the Power Level Set button for 1 second and release. The Power Level LED display will begin to flash. 2) Press the ▲ or ▼ buttons until the desired Power Level is displayed 3) Press the Power Level Set button to store and the Power Level LED display will stop flashing Operating Instructions Power ON/OFF Operation: 1) Press the POWER button to turn the unit ON, press again to turn OFF. Notes: •Only the programmed Channels are displayed for selection •Holding the ▲ or ▼ buttons down continu-ously will fast scroll through the Channel and Power Level selections •Selected Channels are stored in non-volatile memory and remain set during power OFF
Elite Series Wireless A/V Transmitter Model SL-1550-T90 1) Press the Channel Set button for > 5 seconds. 2) Release the Set button once both the Channel LED display and Power Level LED display go blank. 3) The Channel LED display and Power Level LED display will begin to flash. The Power Level LED display will now indicate the frequency that is currently programmed for the displayed Channel number. 4) Press the Channel ▲ or ▼ buttons until the desired Channel to be programmed is dis-played. 5) Press the Power Level ▲ or ▼ buttons until the desired Frequency for the selected Channel to be programmed is displayed. Note: Holding the Power Level ▲ or ▼ buttons down continu-ously will fast scroll through the Frequency range. Channel Frequency Programming Instructions 6) To delete a Channel from the active list press the Power Level ▼ button until all dashes are displayed. 7) Press the Channel Set button and release to store the Preset Frequency value. Note: The Channel LED display and the Power Level LED display will stop flashing for an instant indicating Channel frequency has been stored. 8) Repeat Steps 4) and 7) for all the desired Chan-nels have been programmed. 9) To exit the program operation, Press the Chan-nel Set button for > 5 seconds until both the Channel LED display and Power Level LED dis-play go blank. Then release the button. Factory Channel Default Presets The factory default Channel programming is as follows: Channel Frequency(MHz) CH01 2460 CH02 2472 To restore the unit to factory default Channel programming: 1) Turn the unit OFF 2) Hold down the Channel Set button and then turn the unit 3) Release the Channel Set button after the LED displays active Note: Changes or modifications not expressly approved NextLink Video Communications could void the user’s authority to operate the equipment. NextLink Video Communications Tel: 1-520-889-1340

Navigation menu