Flairency SL-1550-T90 Liscensed Non-Braodcast Station A/V Transmitter User Manual SL 1550 T90 Manual pub
Flair Agency Liscensed Non-Braodcast Station A/V Transmitter SL 1550 T90 Manual pub
Users Manual
ELITE–SERIES Wireless 2.4 GHz A/V Transmitter Model: SL-1550-T90 Introducing the most full featured Wireless Audio/Visual Transmitter available on the market today for mobile broadcast applications FEATURES: ►FCC Part 90 Compliant ►32 Preset Channels Available to Select From ►Each Channel can be Preset to any Frequency Between 2.460GHz and 2.472GHz with 1 MHz Resolution ►10 Power Levels Selectable from between 1mW and 1Watt ►Wide 10VDC to 40VDC Input Power Range ►4 Digit LED Display of Selected Channel ►NTSC Video Input ►4 Digit LED Display of Power Level ►Line Level Audio Input ►Easy to Use Channel Selection Buttons ►Locking Power Connector ►Compact and Lightweight ►Built In Camera Mount FCC ID: XXXYYYYYYYYYYY Contact: NextLink Video Communications Tel: 1-520-889-1340 Elite Series Wireless A/V Transmitter Model SL-1550-T90 Specifications Summary ► Channels: 32 Programmable Preset Channels ► Size: 4.12” x 3.67” x 1.25” ► Frequency Range: 2.460GHz—2.472GHz ► Weight: 300 Grams ► Programmable Resolution: 1 MHz ► Case Type: Extruded Aluminum ► RF Power: Compliant with FCC Part 90 ► Video Connector: BNC ► Antenna Connector: SMA ► Audio Connector: RCA ► Antenna Type: Tilt Swivel Base 0db Gain ► Power Connector: 3 Pin Locking DIN ► Input Power: 10VDC-40VDC @ < 1A ► Operating Temperature: -20° to 120° F (-30o to +50o C) ► Warranty: 1 Year (Specifications subject to change without notice) Operating Instructions Power ON/OFF Operation: 1) Press the POWER button to turn the unit ON, press again to turn OFF. To set the transmission Channel: 1) Press the Channel Set button for 1 second and release. The Channel LED display will begin to flash. 2) Press the ▲ or ▼ buttons until the desired Channel is displayed. 3) Press the Channel Set button to store and the Channel LED display will stop flashing. To set the transmission Power Level: 1) Press the Power Level Set button for 1 second and release. The Power Level LED display will begin to flash. 2) Press the ▲ or ▼ buttons until the desired Power Level is displayed 3) Press the Power Level Set button to store and the Power Level LED display will stop flashing Notes: • Only the programmed Channels are displayed for selection • Holding the ▲ or ▼ buttons down continuously will fast scroll through the Channel and Power Level selections • Selected Channels are stored in non-volatile memory and remain set during power OFF Elite Series Wireless A/V Transmitter Model SL-1550-T90 Channel Frequency Programming Instructions 1) Press the Channel Set button for > 5 seconds. 2) Release the Set button once both the Channel LED display and Power Level LED display go blank. 3) The Channel LED display and Power Level LED display will begin to flash. The Power Level LED display will now indicate the frequency that is currently programmed for the displayed Channel number. 4) Press the Channel ▲ or ▼ buttons until the desired Channel to be programmed is displayed. 5) Press the Power Level ▲ or ▼ buttons until the desired Frequency for the selected Channel to be programmed is displayed. Note: Holding the Power Level ▲ or ▼ buttons down continuously will fast scroll through the Frequency range. 6) To delete a Channel from the active list press the Power Level ▼ button until all dashes are displayed. 7) Press the Channel Set button and release to store the Preset Frequency value. Note: The Channel LED display and the Power Level LED display will stop flashing for an instant indicating Channel frequency has been stored. 8) Repeat Steps 4) and 7) for all the desired Channels have been programmed. 9) To exit the program operation, Press the Channel Set button for > 5 seconds until both the Channel LED display and Power Level LED display go blank. Then release the button. Factory Channel Default Presets The factory default Channel programming is as follows: Channel CH01 CH02 Frequency(MHz) 2460 2472 To restore the unit to factory default Channel programming: 1) Turn the unit OFF 2) Hold down the Channel Set button and then turn the unit 3) Release the Channel Set button after the LED displays active Note: Changes or modifications not expressly approved NextLink Video Communications could void the user’s authority to operate the equipment. NextLink Video Communications Tel: 1-520-889-1340
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2008:06:27 11:11:59-04:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2008:06:27 11:11:59-04:00 Format : application/pdf Title : SL-1550-T90_Manual.pub Creator : Administrator Document ID : uuid:328c8e26-b59a-444c-8a1d-2b6d6767c96f Instance ID : uuid:aaebc254-c4d0-4210-84a1-446dc2e59e09 Page Count : 3 Author : AdministratorEXIF Metadata provided by EXIF.tools