Flir BelgiumBA CCTR Low-power (unlicensed) wireless device for leisure User Manual
Raymarine UK Ltd. Low-power (unlicensed) wireless device for leisure
Contents
Gseries Command Center
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 898588 |
| Application ID | hxEvWmTAQM/K3aYzSy+Q/g== |
| Document Description | Gseries Command Center |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 20.65kB (258069 bits) |
| Date Submitted | 2008-02-05 00:00:00 |
| Date Available | 2008-02-05 00:00:00 |
| Creation Date | 2006-09-20 10:07:43 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2007-07-18 09:55:15 |
| Document Title | untitled |
| Document Creator | FrameMaker 7.0 |
Waste Electrical and Electronic Equipment Directive G-Series Command Center Keyboard Installation instructions Product installation This equipment must be installed and operated in accordance with the Raymarine instructions provided. Failure to do so could result in poor product performance, personal injury, and/or damage to your boat. Service and Maintenance This product contains no user serviceable components. Please refer all maintenance and repair to authorized Raymarine dealers. Unauthorized repair may affect your warranty. Ultra violet light To provide protection against the damaging effects of ultra violet (UV) light, the sun cover should be placed on the unit when not in use. Cleaning DO NOT use acid, ammonia based or abrasive products. DO NOT use commercial high pressure washing (jet wash) equipment. Document number: 87084-1 Date: July 2007 The Waste Electrical and Electronic Equipment (WEEE) Directive requires the recycling of waste electrical and electronic equipment. Whilst the WEEE Directive does not apply to some of Raymarine’s products, we support its policy and ask you to be aware of how to dispose of this product. The crossed out wheelie bin symbol, illustrated above, and found on our products signifies that this product should not be disposed of in general waste or landfill. Please contact your local dealer, national distributor or Raymarine Technical Services for information on product disposal. Technical specification Approvals: CE - conforms to FCC- conforms to Additional conformance EN60945, EN300-440-2 CFR47 PART 15 IC-RSS-210 Size 297 x 98 x 46 Weight 0.65 kg Mounting Dash mount Handheld (with optional wireless upgrade) Supply voltage 9 V to 16 V Disclaimer The technical and graphical information contained in this document, to the best of our knowledge, was correct as it went to press. However, our policy of continuous improvement and updating may change product specifications without prior notice. As a result, unavoidable differences between the product and handbook may occur from time to time. Raymarine cannot accept responsibility for any inaccuracies or omissions it may contain. For the latest product information visit our website - www.raymarine.com Power consumption 1.5 W Environmental conditions: operating temperature: -15°C to 55°C (5°F to 131°F) non-operating temperature: -25°C to 70°C (-13°F to 158°F) relative humidity limit: 95% water protection:waterproof to CFR-46 standard EMC installation guidelines Raymarine equipment and accessories conform to the appropriate Electromagnetic Compatibility (EMC) regulations. This minimizes electromagnetic interference between equipment, which could otherwise affect the performance of your system. Correct installation is required to ensure that EMC performance is not compromised. For optimum EMC performance, we recommend that: Raymarine equipment and the cables connected to it are: i. At least 3 ft. (1 m) from any equipment transmitting or cables carrying radio signals e.g. VHF radios, cables and antennas. In the case of SSB radios, the distance should be increased to 7 ft. (2 m). ii. More than 7 ft. (2 m) from the path of a radar beam. A radar beam can normally be assumed to spread 20 degrees above and below the radiating element. • Raymarine specified cables are used. • Cables are not cut or extended. Always allow the maximum separation possible between different items of electrical equipment. This will provide the best conditions for EMC performance for the installation. Storage packed: conditions when Temperature : -25°C to 55°C (-13°F to 158°F) relatiive humidity: 75% LEN Raymarine plc Anchorage Park, Portsmouth, Hampshire PO3 5TD United Kingdom Raymarine Inc. 21 Manchester Street, Merrimack, New Hampshire 03054-4801 USA Tel: +44 (0) 23 9269 3611 Fax: +44 (0) 23 9269 4642 Tel: +1 603.881.5200 Fax: +1 603.864.4576 www.raymarine.com Pack items G-Series System Part No. G-Series command center keyboard E02044 Sun cover R08307 1 m (3.3 ft) SeaTalkng/NMEA2000 cable A06039 400 mm (15.75 in) SeaTalkng backbone cable A06033 Suncover SeaTalk Command center keyboard Monitor GPM 400 A06028 Rear cover / mounting bracket R08308 Screw pack R08309 Keyboard ABC GHI Rear clamp assembly Stud (x4) Finger nut (x4) SeaTalkng backbone cable D10065-1 SeaTalkng spur cable Installation sheet 87084 Warranty booklet 80017 JKL DEF MNO WPTS PAGE MENU MOB OUT RANGE PQRS TUV WXYZ IN ACTIVE DODGE STANDBY DATA PILOT OK CANCEL D10068-1 ENTER Panel seal SeaTalkng T connector ng T-piece connector SeaTalkng backbone SeaTalkng spur Description SeaTalkng spur Handbook/ Documentation G-Series system Maximum quantity of Keyboards The Keyboard is installed as a part of the Raymarine G-Series marine electronics system. Refer to the additional documentation supplied with your G-series GPM400 processor for additional information necessary to install the keyboard within your system. All documents can be downloaded from www.raymarine.com/handbooks. The G-Series system will support up to 8 keyboards. G-Series system documentation Title Part number G-Series system installation and commissioning Instructions 87070 G- Series system operating guide 86126 G-Series system user reference guide 81276 Keyboard connections Keyboard cables Keyboard connection details SeaTalkng system. The G-Series Keyboard communicates using the It may be connected directly to the backbone (wired) or used remotely with a separate basestation and wireless upgrade kit. SeaTalkng instrument, e.g. ST70 Cable SeaTalkng backbone Schematic diagram SeaTalkng spur SeaTalk spur Keyboard ng D10070-1 When connecting a keyboard to the system, record its details on your system/schematic diagram. You will need this information during commissioning. (Refer to the separate G-Series system installation instructions for sample diagrams.) Notes Keyboard to SeaTalkng OR Note: You should have at least one permanently wired keyboard. In the event that any wireless keyboards are lost, the wired keyboard can be used to control the system. Part Number 400 mm (15.75 in) SeaTalkng spur cable A06038 1 m (3.3 ft) SeaTalkng spur cable* A06039* 3 m (9.8 ft) SeaTalkng spur cable A06040 5 m (16.4 ft) SeaTalkng spur cable A06041 Suppled with the keyboard Mounting arrangement Dimensions Mounting and environment 98 mm (3.85 in) G-Series keyboard 59.8 mm (2.35 in) minimum clearance 35 mm (1.38 in) Sun cover 46 mm (1.81 in) Keyboard Panel seal (adhesive side up) SeaTalk NG cable Finger nut (x4) D10226-1 Rear clamp assembly D10101-1 Stud (x4) 297 mm (11.69 in) • The keyboard is suitable for mounting both above and below decks. It is waterproof to CFR-46 standard. • Use the cutting template provided within this booklet. • Connect cable into keyboard before clamping in place. The following conditions apply: • Do NOT install near sources of heat. (e.g. engine). • Install the unit well away from potential sources of ignition. Cables • Minimum bend radius of 100 mm (3.94 in). ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 3.25 in (82.6 mm) Drill hole, 19/64 in (7.5 mm) diameter in 2 positions Command Centre Keyboard Template 11.1 in (281.6 mm) Remove material from shaded area only D10143-1 Drill hole, 15/16 in (23.6 mm) diameter in 2 positions Instrument edge Sun cover edge
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Mode : UseNone XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : FrameMaker 7.0 Modify Date : 2007:07:18 09:55:15Z Create Date : 2006:09:20 10:07:43Z Format : application/pdf Title : untitled Document ID : uuid:1b48d0d4-e062-43cb-acc9-dfd30e0a21a7 Instance ID : uuid:8e9254d3-4453-4905-aee5-5872fdf42ed1 Page Count : 6 Creator : FrameMaker 7.0EXIF Metadata provided by EXIF.tools