Flir BelgiumBA STNGB Low-power (unlicensed) wireless device for leisure User Manual 87086 1

Raymarine UK Ltd. Low-power (unlicensed) wireless device for leisure 87086 1

Gseries Base Station

1G-Series control keyboardWireless base stationInstallation instructionsWaste Electrical and Electronic Equipment DirectiveThe Waste Electrical and Electronic Equipment (WEEE) Directive requiresthe recycling of waste electrical and electronic equipment. Whilst the WEEEDirective does not apply to some of Raymarine’s products, we support itspolicy and ask you to be aware of how to dispose of this product.The crossed out wheeled bin symbol, illustrated above, and found on ourproducts signifies that this product should not be disposed of in generalwaste or landfill.Please contact your local dealer, national distributor or Raymarine TechnicalServices for information on product disposal. DisclaimerThe technical and graphical information contained in this document, to the best of ourknowledge, was correct as it went to press. However, our policy of continuous improve-ment and updating may change product specifications without prior notice. As a result,unavoidable differences between the product and handbook may occur from time totime. Raymarine cannot accept responsibility for any inaccuracies or omissions it maycontain. For the latest product information visit our website - www.raymarine.comEMC installation guidelinesRaymarine equipment and accessories conform to the appropriate ElectromagneticCompatibility (EMC) regulations. This minimizes electromagnetic interference betweenequipment, which could otherwise affect the performance of your system.Correct installation is required to ensure that EMC performance is not compromised.FCC and Industry Canada InformationThe G-Series control keyboard and wireless base station comply with US CFR47 part15 Rules and with IC Standard RSS210. Operation is subject to the following two condi-tions: (1) these devices may not cause harmful interference and (2) these devices mustaccept interference received, including interference that may cause undesiredoperation.Changes or modifications to these devices not expressly approved in writing by Rayma-rine could violate compliance with FCC or IC rules, and void the user's authority tooperate the equipment.Declaration of ConformityRaymarine UK Ltd. hereby declares that the G-Series Control Keyboard and Wirelessbase station are in compliance with the essential requirements and other relevant provi-sions of the R&TTE Directive 1999/5/EC.The original Declarations of Conformity may be viewed on the relevant product pages atwww.raymarine.com.Product installationThis equipment must be installed and operated in accordance with the Raymarine instructions provided. Failure to do so could result in poor product performance, personal injury, and/or damage to your boat.Service and maintenanceThis product contains no user serviceable components. Please refer all maintenance and repair to authorized Raymarine dealers.Unauthorized repair may affect your warranty.CleaningDO NOT use acid, ammonia based or abrasive products.DO NOT use commercial high pressure washing (jet wash) equipment.Document number: 87086-1Date: October 200787086_1.book Page 1 Thursday, October 4, 2007 8:47 AM
2Handbook informationThis installation guide contains information required to successfullyinstall and set up your wireless base station.It is part of a series of documents associated with the G-Seriessystem. All documents can be downloaded from:www.raymarine.com/handbooks.G-Series system documentationAdditional documentsYou may also refer to separate instructions provided with the asso-ciated ancillary equipment.ErrataThe documents supplied with the G-Series system contain a smallnumber of known errors:87070-1 G-Series system installation guidePage 20. System shown has one keyboard base station serving 2keyboards, where 2 base stations are actually required. Eachkeyboard requires a dedicated base station.Page 41 & 42. Connection shows keyboard connected via ST70instrument. Keyboards must be connected to a dedicated T-piece.Page 65. Repeat base stations. These are not available for the wire-less keyboard.Installation sequenceInstallation of the wireless keyboard system requires a structuredand planned approach. Use the following sequence of tasks:Title Part numberG-Series system installation & commissioning instructions87070G-Series command center keyboard installation instructions87084G-Series command center keyboard wireless upgrade kit installation instructions87085G- Series system operating guide 86126G-Series system user reference guide 81276PLANNING1Check pack contents2Plan system layout3Charge keyboard4Site SurveyWe strongly recommend that you produce a complete schematic diagram for your G-Series installation. Refer to the G-Series system installation and commis-sioning instructions for templates and further information.MOUNTING & CONNECTION5Mount base station in selected location.6Make all connections into equipment.87086_1.book Page 2 Thursday, October 4, 2007 8:47 AM
3Check pack itemsWireless base stationPlan wireless keyboard systemTypical system layoutThe base station and wireless keyboard are installed as a part of theRaymarine G-Series system.Description Part No.Wireless base station E020451 m (3.3 ft) SeaTalk NG spur cable - stripped ends A06043400 mm (15.75 in) SeaTalkng backbone cable A06033SeaTalk NG T-connector A06028SeaTalkng backbone cableSeaTalkng spur cableSeaTalk T connectorD10067-2SeaTalkngwireless basestationMonitorKeyboardSeaTalkng backboneSeaTalkng spurSeaTalkngbulkead mountingcableSeaTalkng spurGPM400D10069-2SeaTalkng charge cableBasestationChargepoint9WXYZ8TUV7PQRS4GHI5JKL6MNOACTIVEWPTSMOBDATAMENUPAGE.02ABC3DEF1CANCELSTANDBYDODGE PILOT OKRANGEOUTINENTER87086_1.book Page 3 Thursday, October 4, 2007 8:47 AM
4Notes:1. Each keyboard and base station communicate as a dedi-cated pair.2. You should have at least one permanently wired keyboard. In the event that any wireless keyboards are lost, the wired keyboard can be used to control the system.3. When connecting a keyboard to the system, record its details on your system diagram. You will need this information during commissioning. (Refer to the separate G-Series system installation instructions for sample diagrams.)Wireless keyboard & base station cablesCharge keyboardCharge for 6 hoursBefore proceeding with the installation you must charge thekeyboard. If the SeaTalkng wiring is not installed, you will need tocreate a temporary keyboard connection with power as shown.See also• For information on the keyboard battery and charge point. Refer to separate instructions supplied with the wireless upgrade kit.Cable Part No NotesWireless base station to SeaTalkng1 m (3.3 ft)SeaTalkng spur cable (bare ends)A06043 Included with wireless base station.3 m (9.8 ft)SeaTalkng spur cable (bare ends)A06044Keyboard charging2.5 m (8.2 ft)charging cableR08311 Included with the wireless upgrade kit. 3 m (9.8 ft)SeaTalkng bulkhead mounting cableR08310SeaTalkng power12 Vdc to SeaTalkng A0604912 V dc,5 A fuse supplyD10688-1G-Series Keyboard rearSeaTalkng power cableSeaTalkng spurSeaTalkng backbone87086_1.book Page 4 Thursday, October 4, 2007 8:47 AM
5Site surveyA site survey is required to select the appropriate location for yourwireless base station. You must repeat the site survey for eachkeyboard / base station pair.Mounting and environment• Do NOT install near sources of heat or vibration. (e.g. engine).• Install in a dry area below decks.• Mount on a vertical surface.• Install the unit well away from potential sources of ignition.• Mount at least 1 m (3 ft) away from devices which may be affect-ed by radio transmission (e.g. compass).LocationSelect a location likely to provide the required wireless coverage.E.g. In the immediate vicinity of single / co-located nav stations ormid-way between remotely located nav stations. D10687-1Saloon9WXYZ8TUV7PQRS4GHI5JKL6MNOACTIVEWPTSMOBDATAMENUPAGE02ABC3DEF1CANCELSTANDBYDODGE PILOT OKRANGEOUTINENTERFlybridgeWired keyboardMonitorMonitor9WXYZ8TUV7PQRS4GHI5JKL6MNOACTIVEWPTSMOBDATAMENUPAGE02ABC3DEF1CANCELSTANDBYDODGE PILOT OKRANGEOUTINENTERWireless basestationWireless keyboard9WXYZ8TUV7PQRS4GHI5JKL6MNOACTIVEWPTSMOBDATAMENUPAGE02ABC3DEF1CANCELSTANDBYDODGE PILOT OKRANGEOUTINENTERBridgeWireless BasestationMonitor MonitorWireless keyboard87086_1.book Page 5 Thursday, October 4, 2007 8:47 AM
6Check wireless coverageYou must survey the wireless coverage to ensure that each wirelesskeyboard can operate in the intended area.Connect power to base stationSite the base station at the required location and make a temporaryswitched connection to the power supply.Register Keyboard to base stationRegister an unregistered keyboard to the required base station.1. Turn off all base stations and keyboards within range.2. Turn on the appropriate base station.3. Within one minute turn on the unregistered keyboard.(This must be within range of the base station.)4. The keyboard attempts to register.5. Once the base station is detected, the keyboard display shows the signal strength.e.g.The keyboard is now registered.Note: It is important that NO additional wireless keyboards or base stations are turned on during registration. This will prevent accidental registration of the wrong device or base station.Check signal strength1. Press the button (located under the outer cover of the base station) to initiate site survey mode.2. Slowly move the keyboard around the required area of the vessel, confirming that the signal strength indicator maintains a strong signal (i.e 3 bars).3. If the signal strength is not maintained, re-position the base station and repeat the survey.4. Turn off the base station once the survey is complete.D10689-1WirelessbasestationBlackRedTemporarypowerconnectionScreen12 V dc,5 A fuse supplyPower cable87086_1.book Page 6 Thursday, October 4, 2007 8:47 AM
7Mounting and connectionWireless base station mountingWireless base station connectionsRepeat base stationThere are no repeat base stations for the wireless keyboard.Keyboard and charge cable installationFor information on the wireless keyboard and charge cables, refer tothe separate instructions supplied with the wireless upgrade kit.D10203-266 mm (2.6 in)117 mm (4.61 in)36 mm (1.42 in)MountVerticallyD10208-1BlackRedBlueWhiteWirelessbasestationSeaTalkngconnectionScreen87086_1.book Page 7 Thursday, October 4, 2007 8:47 AM
8Wireless base station technical specificationSize 66 mm x 118 mm x 36mm(2.6 in x 4.7 in x 1.4 in)Mounting Surface mountSupply voltage 9 V to 16 VPower consumption 0.96 WTransmitted power 1 mWEnvironmental conditions: operating temperature: -15°C to 55°C (5°F to 131°F)non-operating temperature: -25°C to 70°C (-13°F to158°F)relative humidity limit: 95%Storage conditions whenpacked:Temperature: -20°C to 55°C (-4°F to 131°F)relative humidity: 75%Base station to keyboardrangeTypically 9 m (30 ft)Approvals: Europe: R&TTE 1999/5/ECUSA: CFR47 Part 15Canada: RSS-210LEN 2Raymarine plcAnchorage Park,Portsmouth,Hampshire PO3 5TDUnited KingdomTel: +44 (0) 23 9269 3611Fax: +44 (0) 23 9269 4642Raymarine Inc.21 Manchester Street,Merrimack,New Hampshire 03054-4801USATel: +1 603.881.5200Fax: +1 603.864.4576www.raymarine.com87086_1.book Page 8 Thursday, October 4, 2007 8:47 AM

Navigation menu