Foneric Electronics PM1E VOCOlinc Smart Outlet User Manual PM1E usermanual en 18 09 28 x

Download:
Mirror Download [FCC.gov]
Document ID	4060911
Application ID	GrJYCLL2/neALR9KVyf0WQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.98kB (112217 bits)
Date Submitted	2018-11-05 00:00:00
Date Available	2018-11-05 00:00:00
Creation Date	2018-09-29 09:54:57
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2018-11-06 08:52:36
Document Title	Microsoft Word - PM1E_usermanual_en_18_09_28 .docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	yang

Product Overview:
PM1E Wi-Fi Smart Power Outlet can be controlled through Wi-Fi wireless network. You
can switch on/off outlet and monitor its status wirelessly. You also can upgrade the
firmware of the PM1E on LinkWise App.
1 Status indication LED
Indicate Wi-Fi/Power status
2 Power/ Reset Button
Short Press:switching outlets on/off
Press &hold for about 5 seconds: factory reset
LED Indicators Status
Status
Status indication LED status
Search Wi-Fi
Green Flashing quickly
Adding a device
Green Flashing slowly
A device added Sucessfully
Red flashing slowly 5 times
Identify a device
Red flashing slowly 5 times
Connected to Wi-Fi(Outlet On)
Green stay on
Connected to Wi-Fi(Outlet Off)
Indication LED stay off
Disconnected from Wi-Fi
Red flashing fastly
Reset
Press & Hold for 5s, then red flash 1 time, green
flashing fastly
OTA in Progress
Red flash slowly
OTA done
Red flashing fastly 4 times
What’s Included:
Wi-Fi Smart Power Outlet
User Guide
Features:

Independent smart outlets and LED indicators

Work with Apple HomeKit

Can be applied to local or remote control of fans, lights, water coolers, heaters,
and rice cookers etc.

overload protection
Electrical Ratings
1 x Smart AC Outlet
Input: AC100~120V, 60Hz
Output: AC100~120V, 10A Max, 1200W Max (Pure Resistive Load)
General use
Safty Warnings










Plug directly into electric outlet (not into extension cord)
For indoor use only
Remove Smart Plug from outlet before cleaning
DO NOT clean with liquid
DO NOT remove ground pin (middle pin) as there is risk of electric shock
DO NOT use in wet or damp areas
Keep children away from Smart Plug and outlet
DO NOT exceed the recommended electrical ratings
DO NOT use in precision timing applications where inaccurate timing could be
dangerous
(sunlamps, saunas, etc.)
DO NOT use with devices that should not be operated unattended.

After switching off the the main power, DO NOT operate until the main power
indicator goes completely off (about 2 seconds delay)

DO NOT use the device when the casing is broken
Quick Start Quide
1.
2.
3.
4.
5.
6.
7.
Download and open the free VOCOlinc LinkWise app from the App Store (Apple
Apple Store ).
Plug the Smart Power Outlet into a desired outlet. Press & Hold the Reset Buttion
for about 5 seconds, the Status indication LED will start red flash 1 time, green
flashing fastly to indicate it is ready for network setup.
Make sure your iPhone or iPad (iOS 12 or later) is connected to a 2.4GHz Wi-Fi
network. Using the router utility software, shutdown 5GHz Wi-Fi networks.
Tap “+”on the top left corner and follow the on-screen directions to complete
network setup.
Note: To add more devices (or repeat the Smart Power Outlet setup process),tap
“+”and you will be prompted to scan the setup code or manually enter the setup
code.
Then prompted select devices from the accessory list . Each accessory has an
identification code, e.g., XXX-XXXXXX. Make sure the last 6 characters of the
identification code is consistent with the last 6 characters of MAC on the bottom of
your Smart Power Outlet and then follow the step to add the device to the Home
and Room.
if the app prompts “Couldn’t add XXX-XXXXXX”, please refer to the first FAQ.
Please keep the setup code for future use.
You can assign a name to your device and use this name when speaking to Siri.
For example, you can name your device “printer”, then launch Siri and speak “Turn
on the Printer”.
Set up customized scenes to control multiple devices with a single command. For
example, if you assign the “I’m going to bed” command to the scene of turning off
bedroom light, when you speak “I’m going to bed” to Siri, everything is done.
The use of a HomeKit-enabled accessory need the follow permissions:
Settings > iCloud > iCloud Drive > Turn On
Settings > iCloud > Keychain > Turn On
Settings > Privacy > HomeKit >LinkWise> Turn On
Monitor AC status
If the AC outlet insert plug, the outlet icon display a tick.
Legal Information
Apple, iPad, iPad Air, iPhone, and iPod touch are trademarks of Apple Inc., registered in
the U.S. and other countries. HomeKit is a trademark of Apple Inc.
Use of the Works with Apple HomeKit logo means that an electronic accessory has
been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has
been certified by the developer to meet Apple performance standards. Apple is not
responsible for the operation of this device or its compliance with safety and
regulatory standards.
Controlling this HomeKit-enabled accessory automatically and away from home
requires an Apple TV with tvOS 12 or later or an iPad with iOS12 or later set up as a
home hub.
To control this HomeKit-enabled accessory, iOS 12 or later is recommended.
Operation is Subject to the Following Two Conditions:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device must not be co-located or operating in conjunction with any other antenna or
transmitter, and must be installed and operated with a minimum distance of 20 cm
between the radiator and user body.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the follow two conditions:(1) This device may not cause interference, and (2)
this device must accept any interference, including interference that may cause
undesired operation of the device.
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS(s). Son
fonctionnement est soumis aux deux conditions suivantes: (1) Cet appareil ne doit pas
provoquer d’interferences et (2) cet appareil doit accepter toute interference,y compris
celles pouvant causer un mauvais fonctionnement de l’appareil.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : yang
Create Date                     : 2018:09:29 09:54:57+08:00
Modify Date                     : 2018:11:06 08:52:36+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Producer                        : Acrobat Distiller 11.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:11:06 08:52:36+08:00
Format                          : application/pdf
Title                           : Microsoft Word - PM1E_usermanual_en_18_09_28 .docx
Creator                         : yang
Document ID                     : uuid:1bb4ee78-ff8a-43ec-8fab-e194f02989c5
Instance ID                     : uuid:21cf475a-103b-477c-9d5b-0357c0ea72a7
Page Count                      : 4

EXIF Metadata provided by EXIF.tools