Food Automation Service Techniques XWIRE-REPEATER Food quality & supply chain monitor equipment User Manual Letter Size

Food Automation - Service Techniques, Inc. Food quality & supply chain monitor equipment Letter Size

User Manual

Installation GuideSmartRepeaterTM DeviceDirect, Inc."...because you can't improvewhat you don't measure"www.MySCK.com( These instructions should be saved for future reference. )
2© 2008 SCK Direct, Inc. 229-51379 Rev A www.MySCK.comSmartRepeaterTM Direct, Inc.NOTICESSCK Direct, Inc. is not liable for any use of product not in accor-dance with SCK Direct, Inc.’s installation and operationinstructions.CLEANINGUsing a clean damp cloth, wipe down the SmartRepeater whennecessary using a commercial quality foodservice-approveddetergent. DO NOT IMMERSE.NEVER use chemical or abrasive cleaners on the SmartRepeater.TOOLS REQUIRED FOR INSTALLATIONDrill Bit: 3/16” if using wall anchor, or #50 if installing intometalPhillips ScrewdriversINCLUDED PARTSPlease confirm that these parts have shipped with your order:SmartRepeater: 231-60233-01Mounting Kit: 213-50641Power Supply Mounting Kit: 213-50759-01Strain Relief Kit: 213-50760-01If something is missing, please call 1-866-840-4271 (8:00 a.m. -5:00 p.m. EST).BEFORE YOU INSTALLSmartRepeaters should be installed after the installation of yourSCK Smart Direct 2TM, SCK Kitchen AdvisorTM, or (FAST.) XwireTMWireless Gateway.Changes or modifications not expresslyapproved by SCK Direct, Inc. could void theuser's authority to operate the equipment.NOTE: This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant to Part 15 ofthe FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installa-tion. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordancewith the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interfer-ence will not occur in a particular installation. If this equipmentdoes cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by oneor more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment andreceiver.Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.Consult the dealer for help.This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.POWER SUPPLY126-10033POWER CORD OPTIONS126-10028: Power Cord U.S.126-10029: Power Cord Euro, Round126-10030: Power Cord UK, Flat
3© 2008 SCK Direct, Inc. 229-51379 Rev A www.MySCK.comSTRAIN RELIEF SETUP1. Apply the supplied Ty-wrap adhesive-backed mount (150-15028) on the bottom side of the SmartRepeater (1) oneinch from the power supply plug.2. Run the supplied Ty-wrap (150-15005R) through one of theholes on the adhesive backed mount.3. Plug the power supply into the SmartRepeater. Take thepower cord and Ty-wrap it so the power cord does notbecome unplugged when mounted on a surface.installation guideThis document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.MOUNTING INSTRUCTIONS1. Choose a location for the SmartRepeater to be installed(within 8 feet of an outlet). Use the SmartRepeater mount-ing bracket template found in this guide to mark thelocations of the 2 mounting holes.View the tentative positioning and ensure there are no loca-tion problems. Drill the 2 pilot holes. (If you are using thesupplied wall anchors, use a 3/16 bit. For mounting intosheet metal, use a #50 bit.) Insert screws into the mountingbracket holes and tighten.2. Clip the Smart Repeater into its bracket.3. Plug the SmartRepeater into outlet.ALTERNATIVE MOUNTING OPTION USINGSUPPLIED VELCRO1. Choose a location to install the SmartRepeater (within 8feet of an outlet).2. Clean the mounting surface and back of the SmartRepeaterwith the supplied alcohol wipe.3. Adhere one piece of the supplied Velcro to the surfacewhere you want to mount the SmartRepeater.Make sure there will be no obstructions once theSmartRepeater is mounted.4. Adhere the second piece of supplied Velcro to the back sideof the SmartRepeater. Then adhere the SmartRepeater ontothe mounting location.5. Plug the SmartRepeater into outlet.
4© 2008 SCK Direct, Inc. 229-51379 Rev A www.MySCK.comDirect, Inc.This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.SmartRepeaterTMStatus LED ChartSignal LEDsTroubleshooting / LED CodesSignal Strength IndicatorINDICATOR CHARTSLED Color LED Blink Rate DescriptionRED Solid On Device is connected asa routerRED SlowDevice is waiting fordata from its parentnodeRED Very FastDevice is communicat-ing with another deviceas a router. Signal barsshould exist.GREEN Solid On Device is connected asa coordinatorGREEN Very FastDevice is communicat-ing with another deviceas a coordinator. Signalbars should exist.LED Action DescriptionStrobe effectusing all LEDsDevice is scanning the channels foravailable networks.LEDs alternatebeing lit insequence for aperiod of time.A diagnostic command was issued tothis device to blink the LEDs in a recog-nizable pattern for a set amount of time.Bars Link QualityNONE(0) No signal or No messages receivedONE(1) Moderate signalTWO(2) Good signalTHREE(3) Excellent signal
5© 2008 SCK Direct, Inc. 229-51379 Rev A www.MySCK.comThis document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.MOUNTING TEMPLATEUse this template as a guide to install your SmartRepeater mounting bracket. Drawing is to scale.214-53639Ainstallation guide
6© 2008 SCK Direct, Inc. 229-51379 Rev A www.MySCK.comSmartRepeaterTM Direct, Inc.This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.This page left intentionally blank.
7© 2008 SCK Direct, Inc. 229-51379 Rev A www.MySCK.cominstallation guideThis document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.This page left intentionally blank.
Direct, Inc.Thank You for ChoosingSCK Direct, Inc!SCK Direct, Inc.905 Honeyspot RoadStratford, CT 06615+1 203.377.4174 voice+1 203.377.8187 fax1.866.840.4271 toll-free sales & helpdeskwww.MySCK.com; info@mysck.com229-51379 Rev. A© 2008 SCK Direct, Inc.Printed in the USA05MAR2008This document contains confidential information. The dissemi-nation, publication, copying, or duplication of this document orthe software described herein without prior written authoriza-tion is strictly prohibited.TroubleshootingShould you experience problems installing your SCKSmartRepeater, or any aspect of your SCK Direct, Inc. services,please contact the SCK HelpDesk toll-free at 1.866.840.4271(Monday-Friday, 8:00 a.m.-5:00 p.m. EST).Optional SCK System ComponentsSCK has a variety of optional accessories to help you completeyour kitchen automation:SCK Kitchen Advisor Information ServerSCK Remote Input DeviceSCK KMS Kitchen Status MonitorSCK-Enabled Appliance ControllersSCK Wireless (XwireTM) Appliance InterfaceSCK Wireless (XwireTM) Temperature/Door SmartSensorTMSCK Wireless (XwireTM) Wireless.GatewaySCK Wired BackboneFor additional information on any of these accessories, or torequest Technical Specification Sheets, please contact your SCKRepresentative or contact SCK Customer Support toll-free at1-866-840-4271 (Monday-Friday, 8:00 a.m. to 5:00 p.m. EST).

Navigation menu