Foshan Lanchiya Digital Technology 00M11201 WIRELESS BLUETOOTH SPEAKER User Manual
Foshan Lanchiya Digital Technology Co., Ltd. WIRELESS BLUETOOTH SPEAKER
User Manual
5. Speaker Phone operation: When the call comes in during playing music, answer the call by touching the button 【PHONE】on the touching panel and talk facing the top panel; or dial the receiver button on the mobile to use mobile to answer the call. Press and hold on 【PHONE】for 2 seconds to hang up the phone during calling. 8.DC5V Charging output: the unit provide standard USB port charging, with DC5V 1A charging current, which can charge mobiles, MP3, etc through USB cable.。 AMETHYSTM1 PHONE 6.Re-pairing: To touch the PAIR button on the control panel for re-pairing, meanwhile the indicator will flash, and there is voice prompt that the unit is ready to be paired. Please follow step 3 to do pairing. PAIR 9. Built-in battery : when using the built-in battery to play music, the unit will manage the battery use automatically, when the power is low, the unit will decrease the volume to ensure the sound quality and longer play time; when the power is not enough to support normal play, the indicator will flash and the unit will be switch to standby, please use the proper power adapter to charge the unit for normal use. FLASH 7.AUX input play: Switch the M1 on, touch the INPUT button on the control panel, the indicator will flash once, and the unit will be connected to the AUX channel play. The music in mobiles, MP3, PC, etc can be played through 3.5mm audio cable. Press input again will turn to bluetooth channel and reconnect automatic. 10.Charging:, please use the supplied power adapter to charging, the green indicator on the back of the unit will be flashing during charging. When the battery is fully-charged, the green indicator will stop flashing. NOTE 1.The Bluetooth device can't find the speaker, the speaker may still connect with last Blue tooth device or another device are searching and connecting with speaker at same time. Now you need to operate as Step 3 to re-connect it. 2. If you hear intermittent sound or no sound from speaker after connection. Please check if the distance from you and speaker are over 10M(33FT) 3.To avoid echo when using the speaker phone function, do not place your phone near or in front of the M1 speaker. 4.For best results it is recommended that Bluetooth enabled music player that supports Apple iPod, iPhone, Samsung players, and Window media players be used. Other, third party supported media players may not support smooth song change functions, which may cause sound distortion or interruption between song tracks. 5.Please use power adaptor which provide from Lanchiya to avoid damage your speaker. 6.Please connect and disconnect adaptor when the switch is in OFF position 7.if your mobile doesn't support mobile ring transfer, you can only hear the M1 Built in ring voice “ incoming call”, when calling come in. SPECIFICATIONS Amplifier output power: left/right 1.5Wx2, subwoofer 3.5Wx1 Amplifier input sensitivity: ≤400m V Amplifier SNR:≥ 70dB Frequency response:70Hz~20KHz Power voltage: AC100-240V, 50/60Hz Battery: 7.4V 1800mHA Battery time 10hours Battery charging time: 4-6hours Blue tooth range: 7-10M(23-33FT) Bluetooth version: 3.0 2.4G Support A2DP INPUT AMETHYST INNOVATIONS CORPORATION 14731-J Franklin Avenue Tustin, CA. 92780 Phone: 714-731-2921 Website: www.amethystinnovationscorp.com M1 PROPERTY RIGHTS INFORMATION: The trademark amethyst lanchiya and all the developed products with this label are registered patents,and belong to Foshan LANCHIYA digitai Technology Co.,Ltd. Our company reservesall rights, and not allow reprinting.Other concerned trademarks a l l b e l o n g t o t h e i r p r o p r i e t o r s . As to t h e c o n s t a nt update and development of the products, our company reserves the right to change and rework our products without notice. SAFETY INSTRUCTIONS: To e n s u r e y o u r s a f e t y a n d e n j o y m e n t , r e a d a n d f o l l o w t h e s a f e t y i n s t r u c t i o n s a n d u s e i n t h e d i r e c t e d m a n n e r. K e e p t h i s m a n u a l f o r future reference. WARING: To prevent an y f i r e o r e l e c t r i c a l hazards, do not remove or dissemble any parts from this unit. Please ensure that you use a qualified technician to service it. • Do not expose the unit to rain, water or moisture • Do not place liquid on or close to unit • Do not place unit on or near an open fire such as candles or light • Keep away from heat and dust • Place unit on a stable and level platform • Do not place any items on top of unit • Do not use excessive force when pushing the unit buttons • Do not attempt to pull the power cord from a distance to shut the power • The unit with Lithium Battery in please don't burn,bite,Keep away from Children and dispose in appointed place for battery • Secure all cords and connections and do not use pinched or defective one • Unplug the power cord if the unit is left unused for extended periods • Clean with a damp cloth only • Operating temperature 0ºC-55ºC (32ºF~131ºF) • Blue tooth device can't be found: probably, the Speaker has been connected by other Blue tooth device. Press Pair button to search it again. If you still cannot find the speaker, please Turn Off the speaker for 5second then turn it on. • Blue tooth signal intermittently: the effective distance between speaker and Device is 10M, the signal will be intermittent if the distance more than 10M(3 3 FT). • If there are more than 1 Speaker are switch on, the Bluetooth device will find more than 1 speaker, if you want to connect one of them please turn off the others • If your Bluetooth device on searching and find many other Bluetooth device, please wait for the searching finished and select Speaker to pair. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed toprovide reasonable protection against h a r m f u l interference i n a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may ca u s e h a r m f ul interference to radio communications. However, there is no guarantee that interference will not occur in a particular i n s t a l l a t i o n . I f t h i s equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with a n y o ther antenna or transmitter.Installers must ensure that 20cm separation distance will be maintained between the device (excluding its handset) and users. PACKAGE CONTENTS FRONT PANEL 1. LED indicator 2. Preview 3. Play/pause 4. Next 5. Volume+ 6. Input 8. Pair, 9. Handsfree phone 10.Volume11. Charging indicator 12. DC in 10 BACK PANEL 3.Connecting to the Bluetooth device : Search and connect 【AMETHYST M1】 with your Bluetooth device.. The Invoice remind “Pair completed”. Then you can play music from your Bluetooth device. 11 13. Switch 12 14. AUX, 13 15.Charging out port 14 15 (DC 5V 1A) AMETHYST M1 Brief Operation Introduction 1.Connection: Using built in battery or Plug M1 into an outlet using the include AC adaptor then switch it On Please make sure the switch is on off position when you plug M1 with AC adaptor. OFF AMETHYST M1 4. Music-playing operation: When M1 has successfully connected to the Bluetooth device properly, you can control the music-playing of the mobiles through touching the PRE,NEXT,PLAY/PAUSE button on the touching panel. ON TOP PANEL 7. Microphone COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. Power-on Operation: After switching M1 on, the indicator on the front panel is on, and Voice remind [Power ON] then the Bluetooth channel; then starts to search the device that connected last time. If the searching is successful, M1 will connect automatically with the device, and voices 『pair completed』 then the Vocie remind”DU DU Du” for connect ready. M1 will play the music through the device. If the searching is failed, M1 will be in the status of Ready to pair. PREV,NEXT,PLAY/PAUSE NOTE: It may take 4-6 hours to fully charge the battery. 1.M1 machine 2.Power adapter 3.Audio cable 4 .User manual
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 2 Create Date : 2013:02:21 20:29:29+08:00 Modify Date : 2013:02:21 20:29:29+08:00 Producer : Corel PDF Engine Version 15.2.0.686 Author : Administrator Creator : CorelDRAW X5 Title : 美国蓝旗亚低价蓝牙版说明书 M1-G02-1.cdrEXIF Metadata provided by EXIF.tools